# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details

# HAOS - don't change it!
disable_splash=1
kernel=u-boot.bin
arm_64bit=1

# Enable primary UART by default
enable_uart=1

# No HDMI on Yellow, but we can't set to 16 since we need the full firmware
# for codecs
gpu_mem=32

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Uncomment this to enable GPIO support for RPI-RF-MOD/HM-MOD-RPI-PCB
#dtparam=i2c_arm=on
#dtoverlay=rpi-rf-mod

# Additional overlays and parameters are documented /boot/overlays/README

[all]
device_tree=bcm2711-rpi-cm4-ha-yellow.dtb