# Note: All the variables to this image are optional.
# See README for more information.
# To use, uncomment and replace with your own values.

# Use a DNS name for the VPN server
# - The DNS name must be a fully qualified domain name (FQDN)
# - If not set, the server's public IP address is auto-detected
# VPN_DNS_NAME=vpn.example.com

# Use the public IP address of the VPN server
# - Only needed if VPN_DNS_NAME is not set and auto-detection fails
# VPN_PUBLIC_IP=your_server_ip

# Protocol for OpenVPN (tcp or udp, default: udp)
# VPN_PROTO=udp

# Port for OpenVPN (1-65535, default: 1194)
# VPN_PORT=1194

# Specify a name for the first VPN client
# - Use one word only, no special characters except '-' and '_'
# - Default is 'client' if not specified
# VPN_CLIENT_NAME=your_client_name

# Use alternative DNS servers for VPN clients
# - Default is Google Public DNS (8.8.8.8 and 8.8.4.4)
# - Example below shows Cloudflare's DNS service
# VPN_DNS_SRV1=1.1.1.1
# VPN_DNS_SRV2=1.0.0.1

# Override the auto-detected IPv6 address of the server
# - IPv6 is auto-detected. Only set this if auto-detection fails
# - When set to a valid IPv6 address, enables IPv6 support
# VPN_PUBLIC_IP6=your_server_ipv6

# Anonymous aggregate usage counts (default: enabled)
# Set to 1 to disable.
# VPN_DISABLE_USAGE_COUNTS=1