(kicad_pcb (version 20171130) (host pcbnew "(5.1.6)-1") (general (thickness 1.6) (drawings 24) (tracks 0) (zones 0) (modules 79) (nets 58) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user) (35 F.Paste user) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user) (49 F.Fab user) ) (setup (last_trace_width 0.25) (trace_clearance 0.2) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.2) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 1.524 1.524) (pad_drill 0.762) (pad_to_mask_clearance 0.05) (aux_axis_origin 100 100) (grid_origin 100 100) (visible_elements FFFFFF7F) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes true) (usegerberadvancedattributes true) (creategerberjobfile true) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 GND) (net 2 +12V) (net 3 "Net-(C3-Pad2)") (net 4 "Net-(C3-Pad1)") (net 5 "Net-(C4-Pad2)") (net 6 "Net-(C4-Pad1)") (net 7 "Net-(C8-Pad1)") (net 8 "Net-(C9-Pad1)") (net 9 "Net-(C14-Pad2)") (net 10 "Net-(C14-Pad1)") (net 11 "Net-(C15-Pad2)") (net 12 "Net-(C15-Pad1)") (net 13 "Net-(C19-Pad2)") (net 14 "Net-(C19-Pad1)") (net 15 "Net-(C20-Pad2)") (net 16 "Net-(C20-Pad1)") (net 17 /Sheet60078C3F/Vin) (net 18 /Sheet60078C3F/Vout) (net 19 "Net-(D1-Pad2)") (net 20 "Net-(J1-PadT)") (net 21 "Net-(C10-Pad2)") (net 22 "Net-(C11-Pad2)") (net 23 "Net-(J3-PadT)") (net 24 "Net-(J4-PadT)") (net 25 "Net-(D2-Pad2)") (net 26 +5V) (net 27 /Sheet5FF09E24/IN_LEFT) (net 28 "Net-(R4-Pad1)") (net 29 /Sheet5FF09E24/IN_RIGHT) (net 30 "Net-(R5-Pad1)") (net 31 "Net-(C10-Pad1)") (net 32 "Net-(C11-Pad1)") (net 33 "Net-(R14-Pad2)") (net 34 "Net-(R15-Pad2)") (net 35 "Net-(R18-Pad1)") (net 36 "Net-(R19-Pad1)") (net 37 "Net-(R22-Pad1)") (net 38 "Net-(R23-Pad1)") (net 39 "Net-(R26-Pad1)") (net 40 "Net-(R27-Pad2)") (net 41 "Net-(C6-Pad1)") (net 42 "Net-(C17-Pad1)") (net 43 "Net-(C22-Pad1)") (net 44 "Net-(C28-Pad1)") (net 45 "Net-(C29-Pad1)") (net 46 "Net-(C30-Pad1)") (net 47 "Net-(J5-Pad8)") (net 48 "Net-(J5-Pad7)") (net 49 "Net-(J5-Pad6)") (net 50 "Net-(J5-Pad5)") (net 51 "Net-(J5-Pad4)") (net 52 "Net-(J5-Pad3)") (net 53 "Net-(J5-Pad2)") (net 54 "Net-(J5-Pad1)") (net 55 "Net-(J1-PadR)") (net 56 "Net-(J3-PadR)") (net 57 "Net-(J4-PadR)") (net_class Default "This is the default net class." (clearance 0.2) (trace_width 0.25) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net +12V) (add_net +5V) (add_net /Sheet5FF09E24/IN_LEFT) (add_net /Sheet5FF09E24/IN_RIGHT) (add_net /Sheet60078C3F/Vin) (add_net /Sheet60078C3F/Vout) (add_net GND) (add_net "Net-(C10-Pad1)") (add_net "Net-(C10-Pad2)") (add_net "Net-(C11-Pad1)") (add_net "Net-(C11-Pad2)") (add_net "Net-(C14-Pad1)") (add_net "Net-(C14-Pad2)") (add_net "Net-(C15-Pad1)") (add_net "Net-(C15-Pad2)") (add_net "Net-(C17-Pad1)") (add_net "Net-(C19-Pad1)") (add_net "Net-(C19-Pad2)") (add_net "Net-(C20-Pad1)") (add_net "Net-(C20-Pad2)") (add_net "Net-(C22-Pad1)") (add_net "Net-(C28-Pad1)") (add_net "Net-(C29-Pad1)") (add_net "Net-(C3-Pad1)") (add_net "Net-(C3-Pad2)") (add_net "Net-(C30-Pad1)") (add_net "Net-(C4-Pad1)") (add_net "Net-(C4-Pad2)") (add_net "Net-(C6-Pad1)") (add_net "Net-(C8-Pad1)") (add_net "Net-(C9-Pad1)") (add_net "Net-(D1-Pad2)") (add_net "Net-(D2-Pad2)") (add_net "Net-(J1-PadR)") (add_net "Net-(J1-PadT)") (add_net "Net-(J3-PadR)") (add_net "Net-(J3-PadT)") (add_net "Net-(J4-PadR)") (add_net "Net-(J4-PadT)") (add_net "Net-(J5-Pad1)") (add_net "Net-(J5-Pad2)") (add_net "Net-(J5-Pad3)") (add_net "Net-(J5-Pad4)") (add_net "Net-(J5-Pad5)") (add_net "Net-(J5-Pad6)") (add_net "Net-(J5-Pad7)") (add_net "Net-(J5-Pad8)") (add_net "Net-(R14-Pad2)") (add_net "Net-(R15-Pad2)") (add_net "Net-(R18-Pad1)") (add_net "Net-(R19-Pad1)") (add_net "Net-(R22-Pad1)") (add_net "Net-(R23-Pad1)") (add_net "Net-(R26-Pad1)") (add_net "Net-(R27-Pad2)") (add_net "Net-(R4-Pad1)") (add_net "Net-(R5-Pad1)") ) (module suku_basics:pot_dual_gang_vertical (layer F.Cu) (tedit 60576ADA) (tstamp 6057E50F) (at 140.005 86.665) (descr "Potentiometer, vertical, 9mm, dual, http://www.taiwanalpha.com.tw/downloads?target=products&id=113") (tags "potentiometer vertical 9mm dual") (path /5FF89F0F/5FF0C088) (fp_text reference RV3 (at -7.56 1.15 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20k (at 7.66 7.5 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at -0.04 -0.007) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start -3 5) (end -4 5) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start -3 -5) (end -3 -6) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 3 -5) (end 4 -5) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 3 5) (end 3 6) (angle -90) (layer F.SilkS) (width 0.12)) (fp_text user %R (at -11.43 -8.89 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -3 -6) (end 3 -6) (layer F.SilkS) (width 0.12)) (fp_line (start 4 5) (end 4 2) (layer F.SilkS) (width 0.12)) (fp_line (start -3 6) (end 3 6) (layer F.SilkS) (width 0.12)) (fp_line (start -4 -5) (end -4 -2) (layer F.SilkS) (width 0.12)) (fp_line (start -4 2) (end -4 5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 -0.5) (end 0.5 0.5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 0.5) (end 0.5 -0.5) (layer F.SilkS) (width 0.12)) (fp_circle (center -0.04 -0.007) (end 2.96 -0.007) (layer F.Fab) (width 0.12)) (fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.12)) (fp_line (start 4 -2) (end 4 -5) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 0 -3) (layer F.SilkS) (width 0.12)) (fp_line (start 6.36 11.15) (end 6.36 -5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.36 11.15) (end 6.36 11.15) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.36 -5.1) (end -6.36 11.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.36 -5.1) (end -6.36 -5.1) (layer F.CrtYd) (width 0.05)) (pad 6 thru_hole oval (at 2.54 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 16 "Net-(C20-Pad1)")) (pad 4 thru_hole oval (at -2.54 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 38 "Net-(R23-Pad1)")) (pad 5 thru_hole oval (at 0 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 15 "Net-(C20-Pad2)")) (pad 1 thru_hole oval (at -2.54 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 37 "Net-(R22-Pad1)")) (pad "" thru_hole oval (at 4.5 0 180) (size 3.2 2.8) (drill 2.4 (offset 0.2 0)) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 0 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 13 "Net-(C19-Pad2)")) (pad 3 thru_hole oval (at 2.54 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 14 "Net-(C19-Pad1)")) (pad "" thru_hole oval (at -4.5 0) (size 3.2 2.8) (drill 2.4 (offset 0.2 0)) (layers *.Cu *.Mask)) (pad "" thru_hole oval (at -4.75 0 180) (size 2.72 3.24) (drill oval 1.1 1.8) (layers *.Cu *.Mask)) (pad "" thru_hole oval (at 4.75 0 180) (size 2.72 3.24) (drill oval 1.1 1.8) (layers *.Cu *.Mask)) (model ${INTECH_3D}/ptv09a-4x20f-xxxx.stp (offset (xyz 0 0 6.5)) (scale (xyz 1 1 1)) (rotate (xyz 90 0 180)) ) ) (module suku_basics:pot_dual_gang_vertical (layer F.Cu) (tedit 60576ADA) (tstamp 6057E9E1) (at 113.335 86.665) (descr "Potentiometer, vertical, 9mm, dual, http://www.taiwanalpha.com.tw/downloads?target=products&id=113") (tags "potentiometer vertical 9mm dual") (path /5FF89E02/5FF0C088) (fp_text reference RV2 (at -7.56 1.15 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20k (at 7.66 7.5 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at -0.04 -0.007) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start -3 5) (end -4 5) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start -3 -5) (end -3 -6) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 3 -5) (end 4 -5) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 3 5) (end 3 6) (angle -90) (layer F.SilkS) (width 0.12)) (fp_text user %R (at -11.43 -8.89 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -3 -6) (end 3 -6) (layer F.SilkS) (width 0.12)) (fp_line (start 4 5) (end 4 2) (layer F.SilkS) (width 0.12)) (fp_line (start -3 6) (end 3 6) (layer F.SilkS) (width 0.12)) (fp_line (start -4 -5) (end -4 -2) (layer F.SilkS) (width 0.12)) (fp_line (start -4 2) (end -4 5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 -0.5) (end 0.5 0.5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 0.5) (end 0.5 -0.5) (layer F.SilkS) (width 0.12)) (fp_circle (center -0.04 -0.007) (end 2.96 -0.007) (layer F.Fab) (width 0.12)) (fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.12)) (fp_line (start 4 -2) (end 4 -5) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 0 -3) (layer F.SilkS) (width 0.12)) (fp_line (start 6.36 11.15) (end 6.36 -5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.36 11.15) (end 6.36 11.15) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.36 -5.1) (end -6.36 11.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.36 -5.1) (end -6.36 -5.1) (layer F.CrtYd) (width 0.05)) (pad 6 thru_hole oval (at 2.54 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 12 "Net-(C15-Pad1)")) (pad 4 thru_hole oval (at -2.54 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 36 "Net-(R19-Pad1)")) (pad 5 thru_hole oval (at 0 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 11 "Net-(C15-Pad2)")) (pad 1 thru_hole oval (at -2.54 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 35 "Net-(R18-Pad1)")) (pad "" thru_hole oval (at 4.5 0 180) (size 3.2 2.8) (drill 2.4 (offset 0.2 0)) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 0 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 9 "Net-(C14-Pad2)")) (pad 3 thru_hole oval (at 2.54 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 10 "Net-(C14-Pad1)")) (pad "" thru_hole oval (at -4.5 0) (size 3.2 2.8) (drill 2.4 (offset 0.2 0)) (layers *.Cu *.Mask)) (pad "" thru_hole oval (at -4.75 0 180) (size 2.72 3.24) (drill oval 1.1 1.8) (layers *.Cu *.Mask)) (pad "" thru_hole oval (at 4.75 0 180) (size 2.72 3.24) (drill oval 1.1 1.8) (layers *.Cu *.Mask)) (model ${INTECH_3D}/ptv09a-4x20f-xxxx.stp (offset (xyz 0 0 6.5)) (scale (xyz 1 1 1)) (rotate (xyz 90 0 180)) ) ) (module suku_basics:pot_dual_gang_vertical (layer F.Cu) (tedit 60576ADA) (tstamp 6057E6EC) (at 86.665 86.665) (descr "Potentiometer, vertical, 9mm, dual, http://www.taiwanalpha.com.tw/downloads?target=products&id=113") (tags "potentiometer vertical 9mm dual") (path /5FF09E25/5FF0C088) (fp_text reference RV1 (at -7.56 1.15 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20k (at 7.66 7.5 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at -0.04 -0.007) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start -3 5) (end -4 5) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start -3 -5) (end -3 -6) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 3 -5) (end 4 -5) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 3 5) (end 3 6) (angle -90) (layer F.SilkS) (width 0.12)) (fp_text user %R (at -11.43 -8.89 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -3 -6) (end 3 -6) (layer F.SilkS) (width 0.12)) (fp_line (start 4 5) (end 4 2) (layer F.SilkS) (width 0.12)) (fp_line (start -3 6) (end 3 6) (layer F.SilkS) (width 0.12)) (fp_line (start -4 -5) (end -4 -2) (layer F.SilkS) (width 0.12)) (fp_line (start -4 2) (end -4 5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 -0.5) (end 0.5 0.5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 0.5) (end 0.5 -0.5) (layer F.SilkS) (width 0.12)) (fp_circle (center -0.04 -0.007) (end 2.96 -0.007) (layer F.Fab) (width 0.12)) (fp_line (start -2.5 1.5) (end 2.5 1.5) (layer F.SilkS) (width 0.12)) (fp_line (start 4 -2) (end 4 -5) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 0 -3) (layer F.SilkS) (width 0.12)) (fp_line (start 6.36 11.15) (end 6.36 -5.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.36 11.15) (end 6.36 11.15) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.36 -5.1) (end -6.36 11.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.36 -5.1) (end -6.36 -5.1) (layer F.CrtYd) (width 0.05)) (pad 6 thru_hole oval (at 2.54 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 6 "Net-(C4-Pad1)")) (pad 4 thru_hole oval (at -2.54 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 30 "Net-(R5-Pad1)")) (pad 5 thru_hole oval (at 0 9.54) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 5 "Net-(C4-Pad2)")) (pad 1 thru_hole oval (at -2.54 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 28 "Net-(R4-Pad1)")) (pad "" thru_hole oval (at 4.5 0 180) (size 3.2 2.8) (drill 2.4 (offset 0.2 0)) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 0 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 3 "Net-(C3-Pad2)")) (pad 3 thru_hole oval (at 2.54 7 180) (size 1.5 2) (drill 1 (offset 0 0.2)) (layers *.Cu *.Mask) (net 4 "Net-(C3-Pad1)")) (pad "" thru_hole oval (at -4.5 0) (size 3.2 2.8) (drill 2.4 (offset 0.2 0)) (layers *.Cu *.Mask)) (pad "" thru_hole oval (at -4.75 0 180) (size 2.72 3.24) (drill oval 1.1 1.8) (layers *.Cu *.Mask)) (pad "" thru_hole oval (at 4.75 0 180) (size 2.72 3.24) (drill oval 1.1 1.8) (layers *.Cu *.Mask)) (model ${INTECH_3D}/ptv09a-4x20f-xxxx.stp (offset (xyz 0 0 6.5)) (scale (xyz 1 1 1)) (rotate (xyz 90 0 180)) ) ) (module suku_basics:jack_3.5_vertical_stereo (layer F.Cu) (tedit 605765CF) (tstamp 6058C516) (at 140.005 59.995) (descr "TRS 3.5mm, vertical, Thonkiconn, PCB mount, (http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html)") (tags "WQP-PJ398SM WQP-PJ301M-12 TRS 3.5mm mono vertical jack thonkiconn qingpu") (path /5FF89F0F/605CBCEF) (fp_text reference J4 (at -4.03 -5.4 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AudioJack3 (at 0 -1.48 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 1.52 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user KEEPOUT (at 0 0) (layer Cmts.User) (effects (font (size 0.4 0.4) (thickness 0.051))) ) (fp_line (start -5 6.5) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.5 6) (end -4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start -4.5 -4.5) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 4.5 6) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.5 0) (layer Dwgs.User) (width 0.12)) (fp_line (start 0.09 1.48) (end 1.48 0.09) (layer Dwgs.User) (width 0.12)) (fp_line (start -0.58 1.35) (end 1.36 -0.59) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.07 1.01) (end 1.01 -1.07) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.42 0.395) (end 0.4 -1.42) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.41 -0.46) (end -0.46 -1.41) (layer Dwgs.User) (width 0.12)) (fp_line (start 4.5 6) (end 0.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 6) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 0.35 -4.5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.35 -4.5) (end -4.5 -4.5) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.8 0) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -1.06 -6.68) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -0.2 -7.48) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 6) (end 4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start 4.5 6) (end -4.5 6) (layer F.Fab) (width 0.1)) (fp_line (start 5 6.5) (end 5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 6.5) (end -5 6.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 -7.9) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.5 -4.45) (end -4.5 -4.45) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 1.8 0) (layer F.Fab) (width 0.1)) (fp_line (start 0 -6.48) (end 0 -4.45) (layer F.Fab) (width 0.1)) (pad T thru_hole circle (at 0 4.92 180) (size 2.13 2.13) (drill 1.43) (layers *.Cu *.Mask) (net 24 "Net-(J4-PadT)")) (pad S thru_hole rect (at 0 -6.48 180) (size 1.93 1.83) (drill 1.22) (layers *.Cu *.Mask) (net 43 "Net-(C22-Pad1)")) (pad R thru_hole circle (at 0 -3.38 180) (size 2.13 2.13) (drill 1.42) (layers *.Cu *.Mask) (net 57 "Net-(J4-PadR)")) (model ${KISYS3DMOD}/Connector_Audio.3dshapes/Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:jack_3.5_vertical_stereo (layer F.Cu) (tedit 605765CF) (tstamp 6058C4F4) (at 113.335 59.995) (descr "TRS 3.5mm, vertical, Thonkiconn, PCB mount, (http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html)") (tags "WQP-PJ398SM WQP-PJ301M-12 TRS 3.5mm mono vertical jack thonkiconn qingpu") (path /5FF89E02/605CBCEF) (fp_text reference J3 (at -4.03 -5.4 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AudioJack3 (at 0 -1.48 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 1.52 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user KEEPOUT (at 0 0) (layer Cmts.User) (effects (font (size 0.4 0.4) (thickness 0.051))) ) (fp_line (start -5 6.5) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.5 6) (end -4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start -4.5 -4.5) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 4.5 6) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.5 0) (layer Dwgs.User) (width 0.12)) (fp_line (start 0.09 1.48) (end 1.48 0.09) (layer Dwgs.User) (width 0.12)) (fp_line (start -0.58 1.35) (end 1.36 -0.59) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.07 1.01) (end 1.01 -1.07) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.42 0.395) (end 0.4 -1.42) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.41 -0.46) (end -0.46 -1.41) (layer Dwgs.User) (width 0.12)) (fp_line (start 4.5 6) (end 0.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 6) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 0.35 -4.5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.35 -4.5) (end -4.5 -4.5) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.8 0) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -1.06 -6.68) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -0.2 -7.48) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 6) (end 4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start 4.5 6) (end -4.5 6) (layer F.Fab) (width 0.1)) (fp_line (start 5 6.5) (end 5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 6.5) (end -5 6.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 -7.9) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.5 -4.45) (end -4.5 -4.45) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 1.8 0) (layer F.Fab) (width 0.1)) (fp_line (start 0 -6.48) (end 0 -4.45) (layer F.Fab) (width 0.1)) (pad T thru_hole circle (at 0 4.92 180) (size 2.13 2.13) (drill 1.43) (layers *.Cu *.Mask) (net 23 "Net-(J3-PadT)")) (pad S thru_hole rect (at 0 -6.48 180) (size 1.93 1.83) (drill 1.22) (layers *.Cu *.Mask) (net 42 "Net-(C17-Pad1)")) (pad R thru_hole circle (at 0 -3.38 180) (size 2.13 2.13) (drill 1.42) (layers *.Cu *.Mask) (net 56 "Net-(J3-PadR)")) (model ${KISYS3DMOD}/Connector_Audio.3dshapes/Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:jack_3.5_vertical_stereo (layer F.Cu) (tedit 605765CF) (tstamp 6058C4D2) (at 59.995 59.995) (descr "TRS 3.5mm, vertical, Thonkiconn, PCB mount, (http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html)") (tags "WQP-PJ398SM WQP-PJ301M-12 TRS 3.5mm mono vertical jack thonkiconn qingpu") (path /5FF7361D/605BC89E) (fp_text reference J2 (at -4.03 -5.4 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AudioJack3 (at 0 -1.48 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 1.52 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user KEEPOUT (at 0 0) (layer Cmts.User) (effects (font (size 0.4 0.4) (thickness 0.051))) ) (fp_line (start -5 6.5) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.5 6) (end -4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start -4.5 -4.5) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 4.5 6) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.5 0) (layer Dwgs.User) (width 0.12)) (fp_line (start 0.09 1.48) (end 1.48 0.09) (layer Dwgs.User) (width 0.12)) (fp_line (start -0.58 1.35) (end 1.36 -0.59) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.07 1.01) (end 1.01 -1.07) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.42 0.395) (end 0.4 -1.42) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.41 -0.46) (end -0.46 -1.41) (layer Dwgs.User) (width 0.12)) (fp_line (start 4.5 6) (end 0.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 6) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 0.35 -4.5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.35 -4.5) (end -4.5 -4.5) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.8 0) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -1.06 -6.68) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -0.2 -7.48) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 6) (end 4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start 4.5 6) (end -4.5 6) (layer F.Fab) (width 0.1)) (fp_line (start 5 6.5) (end 5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 6.5) (end -5 6.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 -7.9) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.5 -4.45) (end -4.5 -4.45) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 1.8 0) (layer F.Fab) (width 0.1)) (fp_line (start 0 -6.48) (end 0 -4.45) (layer F.Fab) (width 0.1)) (pad T thru_hole circle (at 0 4.92 180) (size 2.13 2.13) (drill 1.43) (layers *.Cu *.Mask) (net 21 "Net-(C10-Pad2)")) (pad S thru_hole rect (at 0 -6.48 180) (size 1.93 1.83) (drill 1.22) (layers *.Cu *.Mask) (net 1 GND)) (pad R thru_hole circle (at 0 -3.38 180) (size 2.13 2.13) (drill 1.42) (layers *.Cu *.Mask) (net 22 "Net-(C11-Pad2)")) (model ${KISYS3DMOD}/Connector_Audio.3dshapes/Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:jack_3.5_vertical_stereo (layer F.Cu) (tedit 605765CF) (tstamp 6058C4B0) (at 86.665 59.995) (descr "TRS 3.5mm, vertical, Thonkiconn, PCB mount, (http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html)") (tags "WQP-PJ398SM WQP-PJ301M-12 TRS 3.5mm mono vertical jack thonkiconn qingpu") (path /5FF09E25/605CBCEF) (fp_text reference J1 (at -4.03 -5.4 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AudioJack3 (at 0 -1.48 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 1.52 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user KEEPOUT (at 0 0) (layer Cmts.User) (effects (font (size 0.4 0.4) (thickness 0.051))) ) (fp_line (start -5 6.5) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.5 6) (end -4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start -4.5 -4.5) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 4.5 6) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.5 0) (layer Dwgs.User) (width 0.12)) (fp_line (start 0.09 1.48) (end 1.48 0.09) (layer Dwgs.User) (width 0.12)) (fp_line (start -0.58 1.35) (end 1.36 -0.59) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.07 1.01) (end 1.01 -1.07) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.42 0.395) (end 0.4 -1.42) (layer Dwgs.User) (width 0.12)) (fp_line (start -1.41 -0.46) (end -0.46 -1.41) (layer Dwgs.User) (width 0.12)) (fp_line (start 4.5 6) (end 0.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start -0.5 6) (end -4.5 6) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 -4.5) (end 0.35 -4.5) (layer F.SilkS) (width 0.12)) (fp_line (start -0.35 -4.5) (end -4.5 -4.5) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1.8 0) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -1.06 -6.68) (layer F.SilkS) (width 0.12)) (fp_line (start -1.06 -7.48) (end -0.2 -7.48) (layer F.SilkS) (width 0.12)) (fp_line (start 4.5 6) (end 4.5 -4.4) (layer F.Fab) (width 0.1)) (fp_line (start 4.5 6) (end -4.5 6) (layer F.Fab) (width 0.1)) (fp_line (start 5 6.5) (end 5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 6.5) (end -5 6.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 -7.9) (end -5 -7.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.5 -4.45) (end -4.5 -4.45) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 1.8 0) (layer F.Fab) (width 0.1)) (fp_line (start 0 -6.48) (end 0 -4.45) (layer F.Fab) (width 0.1)) (pad T thru_hole circle (at 0 4.92 180) (size 2.13 2.13) (drill 1.43) (layers *.Cu *.Mask) (net 20 "Net-(J1-PadT)")) (pad S thru_hole rect (at 0 -6.48 180) (size 1.93 1.83) (drill 1.22) (layers *.Cu *.Mask) (net 41 "Net-(C6-Pad1)")) (pad R thru_hole circle (at 0 -3.38 180) (size 2.13 2.13) (drill 1.42) (layers *.Cu *.Mask) (net 55 "Net-(J1-PadR)")) (model ${KISYS3DMOD}/Connector_Audio.3dshapes/Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 60582450) (at 160.5 32) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89F0F/605A760E) (attr smd) (fp_text reference R34 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 "Net-(C30-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6058243A) (at 156.09 34.95) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89F0F/605A7607) (attr smd) (fp_text reference R33 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 "Net-(C30-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 60582424) (at 182.83 24.94) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89E02/605A760E) (attr smd) (fp_text reference R32 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(C29-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6058240E) (at 178.42 27.89) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89E02/605A7607) (attr smd) (fp_text reference R31 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(C29-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 605823F8) (at 146.41 32) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF09E25/605A760E) (attr smd) (fp_text reference R30 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 44 "Net-(C28-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 605823E2) (at 142 34.95) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF09E25/605A7607) (attr smd) (fp_text reference R29 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 44 "Net-(C28-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:grid_outline (layer F.Cu) (tedit 5D6285DF) (tstamp 60581F10) (at 100 100) (path /605AEAE2) (fp_text reference J5 (at 0 0.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x08 (at 0 -0.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -50 -50) (end 50 -50) (layer F.SilkS) (width 0.12)) (fp_line (start 50 -50) (end 50 50) (layer F.SilkS) (width 0.12)) (fp_line (start 50 50) (end -50 50) (layer F.SilkS) (width 0.12)) (fp_line (start -50 50) (end -50 -50) (layer F.SilkS) (width 0.12)) (fp_line (start -50 -44) (end -48.5 -45.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -48.5 -45.5) (end -48.5 -47.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -48.5 -47.5) (end -47.5 -48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -47.5 -48.5) (end -45.5 -48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -45.5 -48.5) (end -44 -50) (layer Dwgs.User) (width 0.12)) (fp_line (start -44 -50) (end 44 -50) (layer Dwgs.User) (width 0.12)) (fp_line (start 44 -50) (end 45.5 -48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 45.5 -48.5) (end 47.5 -48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 47.5 -48.5) (end 48.5 -47.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 48.5 -47.5) (end 48.5 -45.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 48.5 -45.5) (end 50 -44) (layer Dwgs.User) (width 0.12)) (fp_line (start 50 -44) (end 50 44) (layer Dwgs.User) (width 0.12)) (fp_line (start 50 44) (end 48.5 45.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 48.5 45.5) (end 48.5 47.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 48.5 47.5) (end 47.5 48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 47.5 48.5) (end 45.5 48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start 45.5 48.5) (end 44 50) (layer Dwgs.User) (width 0.12)) (fp_line (start 44 50) (end -44 50) (layer Dwgs.User) (width 0.12)) (fp_line (start -44 50) (end -45.5 48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -45.5 48.5) (end -47.5 48.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -47.5 48.5) (end -48.5 47.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -48.5 47.5) (end -48.5 45.5) (layer Dwgs.User) (width 0.12)) (fp_line (start -48.5 45.5) (end -50 44) (layer Dwgs.User) (width 0.12)) (fp_line (start -50 44) (end -50 -44) (layer Dwgs.User) (width 0.12)) (pad 8 thru_hole circle (at -26.67 26.67) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 47 "Net-(J5-Pad8)")) (pad 7 thru_hole circle (at 26.67 26.67) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 48 "Net-(J5-Pad7)")) (pad 6 thru_hole circle (at 26.67 -26.67) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 49 "Net-(J5-Pad6)")) (pad 5 thru_hole circle (at -26.67 -26.67) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 50 "Net-(J5-Pad5)")) (pad 4 thru_hole circle (at -47 47) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 51 "Net-(J5-Pad4)")) (pad 3 thru_hole circle (at 47 47) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 52 "Net-(J5-Pad3)")) (pad 2 thru_hole circle (at 47 -47) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 53 "Net-(J5-Pad2)")) (pad 1 thru_hole circle (at -47 -47) (size 2.5 2.5) (drill 1.5) (layers *.Cu *.Mask) (net 54 "Net-(J5-Pad1)")) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 60581DB6) (at 156.09 32) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89F0F/605A761C) (attr smd) (fp_text reference C30 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 "Net-(C30-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 60581D9B) (at 178.42 24.94) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89E02/605A761C) (attr smd) (fp_text reference C29 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(C29-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 60581D80) (at 142 32) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF09E25/605A761C) (attr smd) (fp_text reference C28 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 44 "Net-(C28-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:SOT-23-6 (layer F.Cu) (tedit 5EAABA4D) (tstamp 6057B597) (at 145.29 6.09) (descr "6-pin SOT-23 package") (tags SOT-23-6) (path /60078C40/6008C2B7) (attr smd) (fp_text reference U6 (at 0 -2.9) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value FP6291 (at 0 2.9) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (fp_line (start 0.9 -1.61) (end -0.9 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -0.9 1.61) (end 1.55 1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -1.9 1.8) (end 1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.9 -1.8) (end -1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 -1.8) (end -1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 1.8) (end 1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.9 0.9) (end 0.25 1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 1.55) (end 0.25 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 0.9) (end 0.9 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 -1.55) (end 0.9 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 1.55) (end -0.9 -1.55) (layer F.Fab) (width 0.1)) (fp_circle (center 1.778 1.778) (end 1.653 1.778) (layer F.SilkS) (width 0.25)) (pad 5 smd roundrect (at -1.1 0 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 /Sheet60078C3F/Vin)) (pad 6 smd roundrect (at -1.1 0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 "Net-(R26-Pad1)")) (pad 4 smd roundrect (at -1.1 -0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 /Sheet60078C3F/Vin)) (pad 3 smd roundrect (at 1.1 -0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 "Net-(R27-Pad2)")) (pad 2 smd roundrect (at 1.1 0 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at 1.1 0.95 180) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 25 "Net-(D2-Pad2)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 180)) ) ) (module Package_SO:SOIC-8_3.9x4.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 6057B580) (at 121.91 27.53) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (path /5FF89F0F/5FF0C08E) (attr smd) (fp_text reference U5 (at 0 -3.4) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NJM4556A (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (pad 8 smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 7 smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 6 smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 5 smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 4 smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 3 smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 "Net-(C30-Pad1)")) (pad 2 smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 13 "Net-(C19-Pad2)")) (pad 1 smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 14 "Net-(C19-Pad1)")) (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SOIC-8_3.9x4.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 605831C1) (at 166.48 60.14) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (path /5FF89E02/5FF0C08E) (attr smd) (fp_text reference U4 (at 0 -3.4) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NJM4556A (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (pad 8 smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 7 smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 6 smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 5 smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 4 smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(C29-Pad1)")) (pad 2 smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 "Net-(C14-Pad2)")) (pad 1 smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 "Net-(C14-Pad1)")) (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SOIC-8_3.9x4.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 605830A9) (at 86 -3.01) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (path /5FF7361D/5FF7D1BA) (attr smd) (fp_text reference U3 (at 0 -3.4) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NJM4556A (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (pad 8 smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 7 smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 16 "Net-(C20-Pad1)")) (pad 6 smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 15 "Net-(C20-Pad2)")) (pad 5 smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 "Net-(C30-Pad1)")) (pad 4 smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 "Net-(C11-Pad1)")) (pad 2 smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 "Net-(R15-Pad2)")) (pad 1 smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /Sheet5FF09E24/IN_RIGHT)) (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SOIC-8_3.9x4.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 6057B532) (at 86 3.44) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (path /5FF7361D/5FF782D8) (attr smd) (fp_text reference U2 (at 0 -3.4) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NJM4556A (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (pad 8 smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 7 smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 "Net-(C15-Pad1)")) (pad 6 smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 "Net-(C15-Pad2)")) (pad 5 smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(C29-Pad1)")) (pad 4 smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 31 "Net-(C10-Pad1)")) (pad 2 smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "Net-(R14-Pad2)")) (pad 1 smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 /Sheet5FF09E24/IN_LEFT)) (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SOIC-8_3.9x4.9mm_P1.27mm (layer F.Cu) (tedit 5D9F72B1) (tstamp 6057B518) (at 86 27.53) (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SOIC SO") (path /5FF09E25/5FF0C08E) (attr smd) (fp_text reference U1 (at 0 -3.4) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value NJM4556A (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (pad 8 smd roundrect (at 2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 7 smd roundrect (at 2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 "Net-(C4-Pad1)")) (pad 6 smd roundrect (at 2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 "Net-(C4-Pad2)")) (pad 5 smd roundrect (at 2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 44 "Net-(C28-Pad1)")) (pad 4 smd roundrect (at -2.475 1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -2.475 0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 44 "Net-(C28-Pad1)")) (pad 2 smd roundrect (at -2.475 -0.635) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 "Net-(C3-Pad2)")) (pad 1 smd roundrect (at -2.475 -1.905) (size 1.95 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 "Net-(C3-Pad1)")) (model ${KISYS3DMOD}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B4FE) (at 149.48 10.09) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /60078C40/6008C30F) (attr smd) (fp_text reference R28 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 5.1k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 "Net-(R27-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B4E8) (at 150.02 5.24) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /60078C40/6008C309) (attr smd) (fp_text reference R27 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 "Net-(R27-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 /Sheet60078C3F/Vout)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B4D2) (at 145.07 10.09) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /60078C40/6008C2ED) (attr smd) (fp_text reference R26 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 "Net-(R26-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B4BC) (at 108.84 33.08) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89F0F/5FF28E3F) (attr smd) (fp_text reference R25 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 47R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 16 "Net-(C20-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 57 "Net-(J4-PadR)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B4A6) (at 130.54 17.63) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89F0F/5FF293C3) (attr smd) (fp_text reference R24 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 47R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 14 "Net-(C19-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 24 "Net-(J4-PadT)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B490) (at 113.25 33.08) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89F0F/5FF12C84) (attr smd) (fp_text reference R23 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /Sheet5FF09E24/IN_RIGHT)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 38 "Net-(R23-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B47A) (at 119.89 32.23) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89F0F/5FF11F72) (attr smd) (fp_text reference R22 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 /Sheet5FF09E24/IN_LEFT)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 "Net-(R22-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 60583208) (at 175.11 53.19) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89E02/5FF28E3F) (attr smd) (fp_text reference R21 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 47R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 "Net-(C15-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 56 "Net-(J3-PadR)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 60583247) (at 164.46 64.84) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89E02/5FF293C3) (attr smd) (fp_text reference R20 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 47R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 "Net-(C14-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 23 "Net-(J3-PadT)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B438) (at 114.82 10.69) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89E02/5FF12C84) (attr smd) (fp_text reference R19 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /Sheet5FF09E24/IN_RIGHT)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 36 "Net-(R19-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 60583286) (at 175.11 50.24) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF89E02/5FF11F72) (attr smd) (fp_text reference R18 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 /Sheet5FF09E24/IN_LEFT)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 35 "Net-(R18-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B40C) (at 92.43 1.09) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF7D1F9) (attr smd) (fp_text reference R17 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 "Net-(R15-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /Sheet5FF09E24/IN_RIGHT)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B3F6) (at 77.34 10.69) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF78317) (attr smd) (fp_text reference R16 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "Net-(R14-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 /Sheet5FF09E24/IN_LEFT)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B3E0) (at 100.18 -4.76) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF7D1DB) (attr smd) (fp_text reference R15 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 "Net-(R15-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 "Net-(C9-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B3CA) (at 96.84 1.09) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF782F9) (attr smd) (fp_text reference R14 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "Net-(R14-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 "Net-(C8-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B3B4) (at 92.43 4.04) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF7D1A8) (attr smd) (fp_text reference R13 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 "Net-(C9-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 "Net-(C11-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B39E) (at 72.93 10.69) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF782C6) (attr smd) (fp_text reference R12 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 "Net-(C8-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 31 "Net-(C10-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B388) (at 101.25 -1.81) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF7D1CC) (attr smd) (fp_text reference R11 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 "Net-(C9-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B372) (at 91.73 11.09) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF7D1C5) (attr smd) (fp_text reference R10 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 "Net-(C9-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B35C) (at 96.14 9.94) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF782EA) (attr smd) (fp_text reference R9 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 "Net-(C8-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B346) (at 101.25 4.09) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF7361D/5FF782E3) (attr smd) (fp_text reference R8 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 "Net-(C8-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B330) (at 94.63 17.63) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF09E25/5FF28E3F) (attr smd) (fp_text reference R7 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 47R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 "Net-(C4-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 "Net-(J1-PadR)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B31A) (at 77.34 33.08) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF09E25/5FF293C3) (attr smd) (fp_text reference R6 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 47R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 "Net-(C3-Pad1)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 20 "Net-(J1-PadT)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B304) (at 83.98 32.23) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF09E25/5FF12C84) (attr smd) (fp_text reference R5 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 /Sheet5FF09E24/IN_RIGHT)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 "Net-(R5-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B2EE) (at 94.63 20.58) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FF09E25/5FF11F72) (attr smd) (fp_text reference R4 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 /Sheet5FF09E24/IN_LEFT)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 28 "Net-(R4-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B2D8) (at 144.75 19.7) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5FEE69AC) (attr smd) (fp_text reference R3 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 22k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 19 "Net-(D1-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B2C2) (at 149.16 16.75) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /600765BD) (attr smd) (fp_text reference R2 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 /Sheet60078C3F/Vout)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:RES_0805 (layer F.Cu) (tedit 5D4FF020) (tstamp 6057B2AC) (at 149.16 19.7) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /60074023) (attr smd) (fp_text reference R1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 0.0254 -0.2032) (end 0.0254 0) (angle -180) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.2032 0.3302) (end -0.2032 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 -0.4064) (end 0.0762 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2032 0) (end 0.0254 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3302) (end 0 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 26 +5V)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 /Sheet60078C3F/Vin)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:IND_0805 (layer F.Cu) (tedit 5D4FF1AA) (tstamp 6057B296) (at 158.3 8.19) (descr "Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags inductor) (path /60078C40/6008C2C3) (attr smd) (fp_text reference L1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 3.3uH (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.127 -0.4064) (end -0.127 0.3302) (layer F.SilkS) (width 0.12)) (fp_line (start -0.127 0.3302) (end 0.2286 0.3302) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 /Sheet60078C3F/Vin)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 25 "Net-(D2-Pad2)")) (model ${KISYS3DMOD}/Inductor_SMD.3dshapes/L_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:LED_0805 (layer F.Cu) (tedit 5D4FFBEA) (tstamp 6057B1FB) (at 153.57 16.75) (descr "Diode SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags diode) (path /5FEE4BEA) (attr smd) (fp_text reference D1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1 -0.6) (end -0.7 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.6) (end -1 -0.3) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.3) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.254 -0.4064) (end -0.254 0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.254 0) (end 0.254 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.254 -0.4064) (end 0.254 0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.254 0.4064) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 19 "Net-(D1-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B1E5) (at 153.89 11.14) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /60078C40/6008C334) (attr smd) (fp_text reference C27 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 /Sheet60078C3F/Vout)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B1CA) (at 158.84 5.24) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /60078C40/6008C326) (attr smd) (fp_text reference C26 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 /Sheet60078C3F/Vout)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B1AF) (at 153.89 8.19) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /60078C40/6008C2D0) (attr smd) (fp_text reference C25 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 /Sheet60078C3F/Vin)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B194) (at 154.43 5.24) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /60078C40/6008C2D6) (attr smd) (fp_text reference C24 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 17 /Sheet60078C3F/Vin)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B179) (at 124.3 32.23) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89F0F/5FF2EFA7) (attr smd) (fp_text reference C23 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:CP_Elec_6.3x5.4 (layer F.Cu) (tedit 5BCA39D0) (tstamp 6057B15E) (at 123.01 20.23) (descr "SMD capacitor, aluminum electrolytic, Panasonic C55, 6.3x5.4mm") (tags "capacitor electrolytic") (path /5FF89F0F/5FF276C7) (attr smd) (fp_text reference C22 (at 0 -4.35) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 220u (at 0 4.35) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.15 0) (layer F.Fab) (width 0.1)) (fp_line (start 3.3 -3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 -3.3) (end 3.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -3.3 2.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -2.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 2.3) (end -2.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.704838 -1.33) (end -2.074838 -1.33) (layer F.Fab) (width 0.1)) (fp_line (start -2.389838 -1.645) (end -2.389838 -1.015) (layer F.Fab) (width 0.1)) (fp_line (start 3.41 3.41) (end 3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start 3.41 -3.41) (end 3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 -3.41) (end 3.41 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 3.41) (end 3.41 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -2.345563 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -2.345563 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -4.4375 -1.8475) (end -3.65 -1.8475) (layer F.SilkS) (width 0.12)) (fp_line (start -4.04375 -2.24125) (end -4.04375 -1.45375) (layer F.SilkS) (width 0.12)) (fp_line (start 3.55 -3.55) (end 3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 -1.05) (end 4.8 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.8 -1.05) (end 4.8 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.8 1.05) (end 3.55 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 1.05) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 3.55) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -3.55) (end 3.55 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 2.4) (end -2.4 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -2.4 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 1.05) (end -3.55 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -1.05) (end -4.8 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.8 -1.05) (end -4.8 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.8 1.05) (end -3.55 1.05) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 2.8 0) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 1 GND)) (pad 1 smd roundrect (at -2.8 0) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 43 "Net-(C22-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_6.3x5.4.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B136) (at 134.95 17.63) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89F0F/5FF2EB0F) (attr smd) (fp_text reference C21 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B11B) (at 128.34 25.78) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89F0F/5FF48A9E) (attr smd) (fp_text reference C20 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20p (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 15 "Net-(C20-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 16 "Net-(C20-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B100) (at 130.54 20.58) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89F0F/5FF48331) (attr smd) (fp_text reference C19 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20p (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 13 "Net-(C19-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 14 "Net-(C19-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 605832CA) (at 168.87 64.84) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89E02/5FF2EFA7) (attr smd) (fp_text reference C18 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:CP_Elec_6.3x5.4 (layer F.Cu) (tedit 5BCA39D0) (tstamp 60583325) (at 167.58 52.84) (descr "SMD capacitor, aluminum electrolytic, Panasonic C55, 6.3x5.4mm") (tags "capacitor electrolytic") (path /5FF89E02/5FF276C7) (attr smd) (fp_text reference C17 (at 0 -4.35) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 220u (at 0 4.35) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.15 0) (layer F.Fab) (width 0.1)) (fp_line (start 3.3 -3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 -3.3) (end 3.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -3.3 2.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -2.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 2.3) (end -2.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.704838 -1.33) (end -2.074838 -1.33) (layer F.Fab) (width 0.1)) (fp_line (start -2.389838 -1.645) (end -2.389838 -1.015) (layer F.Fab) (width 0.1)) (fp_line (start 3.41 3.41) (end 3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start 3.41 -3.41) (end 3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 -3.41) (end 3.41 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 3.41) (end 3.41 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -2.345563 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -2.345563 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -4.4375 -1.8475) (end -3.65 -1.8475) (layer F.SilkS) (width 0.12)) (fp_line (start -4.04375 -2.24125) (end -4.04375 -1.45375) (layer F.SilkS) (width 0.12)) (fp_line (start 3.55 -3.55) (end 3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 -1.05) (end 4.8 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.8 -1.05) (end 4.8 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.8 1.05) (end 3.55 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 1.05) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 3.55) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -3.55) (end 3.55 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 2.4) (end -2.4 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -2.4 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 1.05) (end -3.55 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -1.05) (end -4.8 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.8 -1.05) (end -4.8 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.8 1.05) (end -3.55 1.05) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 2.8 0) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 1 GND)) (pad 1 smd roundrect (at -2.8 0) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 42 "Net-(C17-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_6.3x5.4.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 605833DB) (at 179.52 50.24) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89E02/5FF2EB0F) (attr smd) (fp_text reference C16 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B087) (at 110.41 10.69) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89E02/5FF48A9E) (attr smd) (fp_text reference C15 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20p (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 "Net-(C15-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 "Net-(C15-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6058338D) (at 172.91 58.39) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF89E02/5FF48331) (attr smd) (fp_text reference C14 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20p (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 "Net-(C14-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 "Net-(C14-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B051) (at 96.84 4.04) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF7361D/5FF921FA) (attr smd) (fp_text reference C13 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057B036) (at 91.73 8.14) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF7361D/5FF921F4) (attr smd) (fp_text reference C12 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:CP_Elec_4x5.4 (layer F.Cu) (tedit 5BCA39CF) (tstamp 6057B01B) (at 85.65 9.59) (descr "SMD capacitor, aluminum electrolytic, Panasonic A5 / Nichicon, 4.0x5.4mm") (tags "capacitor electrolytic") (path /5FF7361D/5FF7D1B4) (attr smd) (fp_text reference C11 (at 0 -3.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 3.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_circle (center 0 0) (end 2 0) (layer F.Fab) (width 0.1)) (fp_line (start 2.15 -2.15) (end 2.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.15 -2.15) (end 2.15 -2.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.15 2.15) (end 2.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 -1.15) (end -2.15 1.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 -1.15) (end -1.15 -2.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 1.15) (end -1.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.574773 -1) (end -1.174773 -1) (layer F.Fab) (width 0.1)) (fp_line (start -1.374773 -1.2) (end -1.374773 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 2.26 2.26) (end 2.26 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start 2.26 -2.26) (end 2.26 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -1.195563 -2.26) (end 2.26 -2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -1.195563 2.26) (end 2.26 2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 1.195563) (end -2.26 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 -1.195563) (end -2.26 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 -1.195563) (end -1.195563 -2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 1.195563) (end -1.195563 2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -3 -1.56) (end -2.5 -1.56) (layer F.SilkS) (width 0.12)) (fp_line (start -2.75 -1.81) (end -2.75 -1.31) (layer F.SilkS) (width 0.12)) (fp_line (start 2.4 -2.4) (end 2.4 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.4 -1.05) (end 3.35 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.35 -1.05) (end 3.35 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.35 1.05) (end 2.4 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.4 1.05) (end 2.4 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 2.4) (end 2.4 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -2.4) (end 2.4 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 1.25) (end -1.25 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.25) (end -1.25 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.25) (end -2.4 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 1.05) (end -2.4 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.05) (end -3.35 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.35 -1.05) (end -3.35 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.35 1.05) (end -2.4 1.05) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 1.8 0) (size 2.6 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 22 "Net-(C11-Pad2)")) (pad 1 smd roundrect (at -1.8 0) (size 2.6 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 32 "Net-(C11-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_4x5.4.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:CP_Elec_4x5.4 (layer F.Cu) (tedit 5BCA39CF) (tstamp 6057AFF3) (at 94.1 -3.31) (descr "SMD capacitor, aluminum electrolytic, Panasonic A5 / Nichicon, 4.0x5.4mm") (tags "capacitor electrolytic") (path /5FF7361D/5FF782D2) (attr smd) (fp_text reference C10 (at 0 -3.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 3.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_circle (center 0 0) (end 2 0) (layer F.Fab) (width 0.1)) (fp_line (start 2.15 -2.15) (end 2.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.15 -2.15) (end 2.15 -2.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.15 2.15) (end 2.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 -1.15) (end -2.15 1.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 -1.15) (end -1.15 -2.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 1.15) (end -1.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.574773 -1) (end -1.174773 -1) (layer F.Fab) (width 0.1)) (fp_line (start -1.374773 -1.2) (end -1.374773 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 2.26 2.26) (end 2.26 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start 2.26 -2.26) (end 2.26 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -1.195563 -2.26) (end 2.26 -2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -1.195563 2.26) (end 2.26 2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 1.195563) (end -2.26 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 -1.195563) (end -2.26 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 -1.195563) (end -1.195563 -2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 1.195563) (end -1.195563 2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -3 -1.56) (end -2.5 -1.56) (layer F.SilkS) (width 0.12)) (fp_line (start -2.75 -1.81) (end -2.75 -1.31) (layer F.SilkS) (width 0.12)) (fp_line (start 2.4 -2.4) (end 2.4 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.4 -1.05) (end 3.35 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.35 -1.05) (end 3.35 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.35 1.05) (end 2.4 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.4 1.05) (end 2.4 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 2.4) (end 2.4 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -2.4) (end 2.4 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 1.25) (end -1.25 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.25) (end -1.25 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.25) (end -2.4 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 1.05) (end -2.4 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.05) (end -3.35 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.35 -1.05) (end -3.35 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.35 1.05) (end -2.4 1.05) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 1.8 0) (size 2.6 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 21 "Net-(C10-Pad2)")) (pad 1 smd roundrect (at -1.8 0) (size 2.6 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 31 "Net-(C10-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_4x5.4.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057AFCB) (at 101.25 1.14) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF7361D/5FF7D1E6) (attr smd) (fp_text reference C9 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 "Net-(C9-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057AFB0) (at 96.14 6.99) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF7361D/5FF78304) (attr smd) (fp_text reference C8 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 "Net-(C8-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057AF95) (at 88.39 32.23) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF09E25/5FF2EFA7) (attr smd) (fp_text reference C7 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:CP_Elec_6.3x5.4 (layer F.Cu) (tedit 5BCA39D0) (tstamp 6057AF7A) (at 87.1 20.23) (descr "SMD capacitor, aluminum electrolytic, Panasonic C55, 6.3x5.4mm") (tags "capacitor electrolytic") (path /5FF09E25/5FF276C7) (attr smd) (fp_text reference C6 (at 0 -4.35) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 220u (at 0 4.35) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.15 0) (layer F.Fab) (width 0.1)) (fp_line (start 3.3 -3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 -3.3) (end 3.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -3.3 2.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -2.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 2.3) (end -2.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.704838 -1.33) (end -2.074838 -1.33) (layer F.Fab) (width 0.1)) (fp_line (start -2.389838 -1.645) (end -2.389838 -1.015) (layer F.Fab) (width 0.1)) (fp_line (start 3.41 3.41) (end 3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start 3.41 -3.41) (end 3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 -3.41) (end 3.41 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 3.41) (end 3.41 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -2.345563 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -2.345563 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -4.4375 -1.8475) (end -3.65 -1.8475) (layer F.SilkS) (width 0.12)) (fp_line (start -4.04375 -2.24125) (end -4.04375 -1.45375) (layer F.SilkS) (width 0.12)) (fp_line (start 3.55 -3.55) (end 3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 -1.05) (end 4.8 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.8 -1.05) (end 4.8 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.8 1.05) (end 3.55 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 1.05) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 3.55) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -3.55) (end 3.55 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 2.4) (end -2.4 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -2.4 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 1.05) (end -3.55 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -1.05) (end -4.8 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.8 -1.05) (end -4.8 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.8 1.05) (end -3.55 1.05) (layer F.CrtYd) (width 0.05)) (pad 2 smd roundrect (at 2.8 0) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 1 GND)) (pad 1 smd roundrect (at -2.8 0) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 41 "Net-(C6-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_6.3x5.4.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057AF52) (at 92.43 25.78) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF09E25/5FF2EB0F) (attr smd) (fp_text reference C5 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057AF37) (at 99.04 17.63) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF09E25/5FF48A9E) (attr smd) (fp_text reference C4 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20p (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 "Net-(C4-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 "Net-(C4-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057AF1C) (at 72.93 33.08) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF09E25/5FF48331) (attr smd) (fp_text reference C3 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 20p (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 "Net-(C3-Pad2)")) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 "Net-(C3-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module suku_basics:CAP_0805 (layer F.Cu) (tedit 5D4FF307) (tstamp 6057AF01) (at 144.75 16.75) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5FF99EA8) (attr smd) (fp_text reference C2 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.2286 -0.3302) (end 0.1016 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 -0.4064) (end -0.0508 -0.4064) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 -0.4064) (end -0.1778 -0.3048) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 -0.3048) (end -0.2286 -0.1524) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 -0.1524) (end -0.254 -0.0254) (layer F.SilkS) (width 0.12)) (fp_line (start 0.2286 0.3048) (end 0.1016 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start 0.1016 0.381) (end -0.0508 0.381) (layer F.SilkS) (width 0.12)) (fp_line (start -0.0508 0.381) (end -0.1778 0.2794) (layer F.SilkS) (width 0.12)) (fp_line (start -0.1778 0.2794) (end -0.2286 0.127) (layer F.SilkS) (width 0.12)) (fp_line (start -0.2286 0.127) (end -0.254 0) (layer F.SilkS) (width 0.12)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (gr_line (start 50 144) (end 50 56) (layer Edge.Cuts) (width 0.05) (tstamp 60583438)) (gr_line (start 51.5 145.5) (end 50 144) (layer Edge.Cuts) (width 0.05)) (gr_line (start 51.5 147.5) (end 51.5 145.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 52.5 148.5) (end 51.5 147.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 54.5 148.5) (end 52.5 148.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 56 150) (end 54.5 148.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 144 150) (end 56 150) (layer Edge.Cuts) (width 0.05)) (gr_line (start 145.5 148.5) (end 144 150) (layer Edge.Cuts) (width 0.05)) (gr_line (start 147.5 148.5) (end 145.5 148.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 148.5 147.5) (end 147.5 148.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 148.5 145.5) (end 148.5 147.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 150 144) (end 148.5 145.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 150 56) (end 150 144) (layer Edge.Cuts) (width 0.05)) (gr_line (start 148.5 54.5) (end 150 56) (layer Edge.Cuts) (width 0.05)) (gr_line (start 148.5 52.5) (end 148.5 54.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 147.5 51.5) (end 148.5 52.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 145.5 51.5) (end 147.5 51.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 144 50) (end 145.5 51.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 56 50) (end 144 50) (layer Edge.Cuts) (width 0.05)) (gr_line (start 54.5 51.5) (end 56 50) (layer Edge.Cuts) (width 0.05)) (gr_line (start 52.5 51.5) (end 54.5 51.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 51.5 52.5) (end 52.5 51.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 51.5 54.5) (end 51.5 52.5) (layer Edge.Cuts) (width 0.05)) (gr_line (start 50 56) (end 51.5 54.5) (layer Edge.Cuts) (width 0.05)) )