(kicad_pcb
	(version 20260206)
	(generator "pcbnew")
	(generator_version "10.0")
	(general
		(thickness 1.6)
		(legacy_teardrops no)
	)
	(paper "A4")
	(layers
		(0 "F.Cu" signal)
		(2 "B.Cu" signal)
		(9 "F.Adhes" user "F.Adhesive")
		(11 "B.Adhes" user "B.Adhesive")
		(13 "F.Paste" user)
		(15 "B.Paste" user)
		(5 "F.SilkS" user "F.Silkscreen")
		(7 "B.SilkS" user "B.Silkscreen")
		(1 "F.Mask" user)
		(3 "B.Mask" user)
		(25 "Edge.Cuts" user)
		(27 "Margin" user)
		(31 "F.CrtYd" user "F.Courtyard")
		(29 "B.CrtYd" user "B.Courtyard")
		(35 "F.Fab" user)
		(33 "B.Fab" user)
	)
	(setup
		(pad_to_mask_clearance 0)
		(allow_soldermask_bridges_in_footprints no)
		(tenting
			(front yes)
			(back yes)
		)
		(covering
			(front no)
			(back no)
		)
		(plugging
			(front no)
			(back no)
		)
		(capping no)
		(filling no)
		(pcbplotparams
			(layerselection 0x00000000_00000000_55555555_5755f5ff)
			(plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000)
			(disableapertmacros no)
			(usegerberextensions no)
			(usegerberattributes yes)
			(usegerberadvancedattributes yes)
			(creategerberjobfile yes)
			(dashed_line_dash_ratio 12)
			(dashed_line_gap_ratio 3)
			(svgprecision 4)
			(plotframeref no)
			(mode 1)
			(useauxorigin no)
			(pdf_front_fp_property_popups yes)
			(pdf_back_fp_property_popups yes)
			(pdf_metadata yes)
			(pdf_single_document no)
			(dxfpolygonmode yes)
			(dxfimperialunits yes)
			(dxfusepcbnewfont yes)
			(psnegative no)
			(psa4output no)
			(plot_black_and_white yes)
			(sketchpadsonfab no)
			(plotpadnumbers no)
			(hidednponfab no)
			(sketchdnponfab yes)
			(crossoutdnponfab yes)
			(subtractmaskfromsilk no)
			(outputformat 1)
			(mirror no)
			(drillshape 1)
			(scaleselection 1)
			(outputdirectory "")
		)
	)
	(footprint "Schrune:PJ_002BH" (layer "F.Cu")
    (uuid eeaf4dde-6b72-2528-d3a7-d11a01a8e115)
    (at 143.755 30.0425)
    (property "Reference" "DC1")
    (property "Value" "PJ-002BH")
    	(attr through_hole)
    	(fp_text reference "DC1" (at 0.000 -6.350) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "PJ-002BH" (at 0.000 6.350) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C22359705")
    	(fp_line (start -2.13 -2.29) (end -3.81 -2.29) (layer F.SilkS) (width 0.25))
    	(fp_line (start -3.81 -2.29) (end -3.81 0.34) (layer F.SilkS) (width 0.25))
    	(fp_line (start -3.81 4.36) (end -3.81 6.99) (layer F.SilkS) (width 0.25))
    	(fp_line (start -3.81 6.99) (end 10.80 6.99) (layer F.SilkS) (width 0.25))
    	(fp_line (start 10.80 6.99) (end 10.80 -2.29) (layer F.SilkS) (width 0.25))
    	(fp_line (start 10.80 -2.29) (end 2.13 -2.29) (layer F.SilkS) (width 0.25))
    	(pad 1 thru_hole oval (at -3.00 2.35 0.00) (size 1.700 4.300) (layers *.Cu *.Mask)(drill oval 0.999998 3.499993) (net 11 "VIN_h"))
    	(pad 2 thru_hole oval (at 3.00 2.35 0.00) (size 1.700 3.800) (layers *.Cu *.Mask)(drill oval 0.999998 2.999994) (net 5 "GND"))
    	(pad 3 thru_hole oval (at 0.00 -2.35 0.00) (size 3.800 1.700) (layers *.Cu *.Mask)(drill oval 2.999994 0.999998) (net 5 "GND"))
    	(fp_circle (center -3.70 6.85) (end -3.67 6.85) (layer F.SilkS) (width 0.06))
    	(fp_line (start -3.70 6.85) (end -3.70 -2.16) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -3.70 -2.16) (end 10.70 -2.16) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 10.70 -2.16) (end 10.70 6.85) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 10.70 6.85) (end -3.70 6.85) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/PJ_002BH/DC-IN-TH_PJ-002BH.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:P_2_54_1_3P" (layer "F.Cu")
    (uuid d10a37f2-d689-1bbf-d7a0-5d03d83d070f)
    (at 107.95 44.45)
    (property "Reference" "H1")
    (property "Value" "2.54-1*3P针")
    	(descr "2.54mm 1*3P")
    	(attr through_hole)
    	(fp_text reference "H1" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "2.54-1*3P针" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C49257")
    	(fp_line (start -1.90 -1.27) (end -3.81 -1.27) (layer F.SilkS) (width 0.20))
    	(fp_line (start -3.81 -1.27) (end -3.81 1.27) (layer F.SilkS) (width 0.20))
    	(fp_line (start -3.81 1.27) (end 3.81 1.27) (layer F.SilkS) (width 0.20))
    	(fp_line (start 3.81 1.27) (end 3.81 -1.27) (layer F.SilkS) (width 0.20))
    	(fp_line (start 3.81 -1.27) (end -1.90 -1.27) (layer F.SilkS) (width 0.20))
    	(pad 3 thru_hole circle (at 2.54 0.00 0.00) (size 1.800 1.800) (layers *.Cu *.Mask)(drill 1.199998) (net 6 "power_3v3_h"))
    	(pad 2 thru_hole circle (at 0.00 0.00 0.00) (size 1.800 1.800) (layers *.Cu *.Mask)(drill 1.199998) (net 7 "power_5v_h"))
    	(pad 1 thru_hole rect (at -2.54 0.00 0.00) (size 1.575 1.800) (layers *.Cu *.Mask)(drill 1.199998) (net 5 "GND"))
    	(fp_circle (center -3.81 1.25) (end -3.78 1.25) (layer F.SilkS) (width 0.06))
    	(fp_line (start -3.81 1.25) (end -3.81 -1.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -3.81 -1.25) (end 3.81 -1.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 3.81 -1.25) (end 3.81 1.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 3.81 1.25) (end -3.81 1.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/P_2_54_1_3P/HDR-M-2.54_1x3.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:TPS54331DR" (layer "F.Cu")
    (uuid 44b60098-1cfd-559d-9762-2ebf6f49c3c7)
    (at 171.45 44.45)
    (property "Reference" "U2")
    (property "Value" "TPS54331DR")
    	(descr "Buck Step Down Regulator with 3.5 to 28 V Input and 0.8 to 25 V Output, -40 to 150 degC, 8-Pin SOIC (D), Green (RoHS  no SbBr)")
    	(attr smd)
    	(fp_text reference "U2" (at 0.000 -6.705) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "TPS54331DR" (at 0.000 6.705) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C9865")
    	(fp_line (start -2.50 1.50) (end 2.50 1.50) (layer F.SilkS) (width 0.25))
    	(fp_line (start -2.50 -1.50) (end 2.50 -1.50) (layer F.SilkS) (width 0.25))
    	(fp_line (start -2.50 1.50) (end -2.50 0.73) (layer F.SilkS) (width 0.25))
    	(fp_line (start -2.50 -1.50) (end -2.50 -0.73) (layer F.SilkS) (width 0.25))
    	(fp_line (start 2.50 -1.50) (end 2.50 1.50) (layer F.SilkS) (width 0.25))
    	(pad 1 smd oval (at -1.90 2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 8 "regulator_BOOT"))
    	(pad 2 smd oval (at -0.63 2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 11 "VIN_h"))
    	(pad 3 smd oval (at 0.63 2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 3 "en_r1_1"))
    	(pad 4 smd oval (at 1.90 2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 10 "regulator_SS"))
    	(pad 8 smd oval (at -1.90 -2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 1 "boot_cap_1"))
    	(pad 7 smd oval (at -0.63 -2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 6 smd oval (at 0.63 -2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 9 "regulator_COMP"))
    	(pad 5 smd oval (at 1.90 -2.71 0.00) (size 0.568 1.950) (layers F.Cu F.Paste F.Mask) (net 4 "fb_r1_1"))
    	(fp_circle (center -2.41 3.00) (end -2.38 3.00) (layer F.SilkS) (width 0.06))
    	(fp_circle (center -1.90 3.40) (end -1.75 3.40) (layer Cmts.User) (width 0.30))
    	(fp_circle (center -1.78 1.02) (end -1.63 1.02) (layer F.SilkS) (width 0.30))
    	(fp_arc (start -2.50 -0.73) (mid -1.81 -0.00) (end -2.50 0.73) (layer F.SilkS) (width 0.25))
    	(fp_line (start -2.50 2.00) (end -2.50 -2.00) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -2.50 -2.00) (end 2.50 -2.00) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 2.50 -2.00) (end 2.50 2.00) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 2.50 2.00) (end -2.50 2.00) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/TPS54331DR/SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:P_1206B475K500NT" (layer "F.Cu")
    (uuid 499ae103-4c32-f26b-620c-962bf55a1bda)
    (at 234.95 44.45)
    (property "Reference" "C7")
    (property "Value" "4.7uF +/- 20%")
    	(descr "4.7uF (475) ±10% 50V")
    	(attr smd)
    	(fp_text reference "C7" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "4.7uF +/- 20%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C29823")
    	(fp_line (start 2.41 -1.09) (end 0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.93 1.09) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 2.56 0.94) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.41 -1.09) (end -0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.93 1.09) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.56 0.94) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 11 "VIN_h"))
    	(fp_circle (center -1.60 0.80) (end -1.57 0.80) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 2.56 0.94) (mid 2.52 1.05) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 2.41 -1.09) (mid 2.52 -1.05) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.56 0.94) (mid -2.52 1.05) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.41 -1.09) (mid -2.52 -1.05) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.60 0.80) (end -1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -1.60 -0.80) (end 1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 -0.80) (end 1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 0.80) (end -1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_1206B475K500NT/C1206_L3.2-W1.6-H1.3.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:P_1206B475K500NT" (layer "F.Cu")
    (uuid 2e9a6365-9fa6-d6fc-3f8e-dae61d356d6d)
    (at 254 44.45)
    (property "Reference" "C8")
    (property "Value" "4.7uF +/- 20%")
    	(descr "4.7uF (475) ±10% 50V")
    	(attr smd)
    	(fp_text reference "C8" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "4.7uF +/- 20%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C29823")
    	(fp_line (start 2.41 -1.09) (end 0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.93 1.09) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 2.56 0.94) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.41 -1.09) (end -0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.93 1.09) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.56 0.94) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 11 "VIN_h"))
    	(fp_circle (center -1.60 0.80) (end -1.57 0.80) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 2.56 0.94) (mid 2.52 1.05) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 2.41 -1.09) (mid 2.52 -1.05) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.56 0.94) (mid -2.52 1.05) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.41 -1.09) (mid -2.52 -1.05) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.60 0.80) (end -1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -1.60 -0.80) (end 1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 -0.80) (end 1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 0.80) (end -1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_1206B475K500NT/C1206_L3.2-W1.6-H1.3.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:P_0402B103K500NT" (layer "F.Cu")
    (uuid 0bed0eb3-b39d-67ee-25ed-c375918a6650)
    (at 273.05 44.45)
    (property "Reference" "C3")
    (property "Value" "10nF +/- 10%")
    	(descr "10nF (103) ±10% 50V")
    	(attr smd)
    	(fp_text reference "C3" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "10nF +/- 10%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C1524")
    	(fp_line (start -0.72 -0.50) (end -0.22 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.87 0.35) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.22 0.50) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.72 0.50) (end 0.22 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.22 -0.50) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.87 -0.35) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 11 "VIN_h"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 0.87 -0.35) (mid 0.83 -0.46) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 0.72 0.50) (mid 0.83 0.46) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.87 0.35) (mid -0.83 0.46) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.72 -0.50) (mid -0.83 -0.46) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_0402B103K500NT/C0402_L1.0-W0.5-H0.5.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:RTT02334JTH" (layer "F.Cu")
    (uuid 0e59dfcd-e8b3-96a3-ccc1-2c12c3ae5a04)
    (at 44.45 92.07)
    (property "Reference" "R2")
    (property "Value" "330kohm +/- 1%")
    	(descr "330KΩ (334) ±5%")
    	(attr smd)
    	(fp_text reference "R2" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "330kohm +/- 1%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C11887")
    	(fp_line (start -0.23 0.50) (end -0.94 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.94 0.50) (end -0.94 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.94 -0.50) (end -0.23 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.23 0.50) (end 0.94 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.94 0.50) (end 0.94 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.94 -0.50) (end 0.23 -0.50) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.43 0.00 0.00) (size 0.566 0.540) (layers F.Cu F.Paste F.Mask) (net 3 "en_r1_1"))
    	(pad 1 smd rect (at -0.43 0.00 0.00) (size 0.566 0.540) (layers F.Cu F.Paste F.Mask) (net 11 "VIN_h"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/RTT02334JTH/R0402_L1.0-W0.5-H0.4.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:RTT02683JTH" (layer "F.Cu")
    (uuid 808e8366-caa0-92eb-fc99-88b582c9efdf)
    (at 107.95 92.07)
    (property "Reference" "R3")
    (property "Value" "68kohm +/- 1%")
    	(descr "68KΩ (683) ±5%")
    	(attr smd)
    	(fp_text reference "R3" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "68kohm +/- 1%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C11857")
    	(fp_line (start -0.23 0.50) (end -0.94 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.94 0.50) (end -0.94 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.94 -0.50) (end -0.23 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.23 0.50) (end 0.94 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.94 0.50) (end 0.94 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.94 -0.50) (end 0.23 -0.50) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.43 0.00 0.00) (size 0.566 0.540) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -0.43 0.00 0.00) (size 0.566 0.540) (layers F.Cu F.Paste F.Mask) (net 3 "en_r1_1"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/RTT02683JTH/R0402_L1.0-W0.5-H0.4.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:SL0630_6R8M" (layer "F.Cu")
    (uuid d50f8ac4-4f1d-8b37-8090-83834523c556)
    (at 171.45 92.07)
    (property "Reference" "L1")
    (property "Value" "Inductor")
    	(attr smd)
    	(fp_text reference "L1" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "Inductor" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C22463822")
    	(fp_line (start -3.50 -2.08) (end -3.50 -3.30) (layer F.SilkS) (width 0.25))
    	(fp_line (start -3.50 -3.30) (end 3.48 -3.30) (layer F.SilkS) (width 0.25))
    	(fp_line (start 3.48 -3.30) (end 3.50 -3.28) (layer F.SilkS) (width 0.25))
    	(fp_line (start 3.50 2.08) (end 3.50 3.30) (layer F.SilkS) (width 0.25))
    	(fp_line (start 3.50 3.30) (end -3.49 3.30) (layer F.SilkS) (width 0.25))
    	(fp_line (start -3.49 3.30) (end -3.50 3.30) (layer F.SilkS) (width 0.25))
    	(fp_line (start -3.50 3.30) (end -3.50 2.08) (layer F.SilkS) (width 0.25))
    	(fp_line (start 3.50 -3.30) (end 3.50 -2.08) (layer F.SilkS) (width 0.25))
    	(pad 1 smd rect (at -3.00 0.00 0.00) (size 2.400 3.200) (layers F.Cu F.Paste F.Mask) (net 1 "boot_cap_1"))
    	(pad 2 smd rect (at 3.00 0.00 0.00) (size 2.400 3.200) (layers F.Cu F.Paste F.Mask) (net 7 "power_5v_h"))
    	(fp_circle (center -3.50 3.30) (end -3.47 3.30) (layer F.SilkS) (width 0.06))
    	(fp_line (start -3.50 3.30) (end -3.50 -3.30) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -3.50 -3.30) (end 3.50 -3.30) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 3.50 -3.30) (end 3.50 3.30) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 3.50 3.30) (end -3.50 3.30) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/SL0630_6R8M/IND-SMD_L7.0-W6.6-H3.0.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:SS34" (layer "F.Cu")
    (uuid ed7ce71e-9e09-cf9f-e624-a5a2e857df15)
    (at 234.95 92.07)
    (property "Reference" "D1")
    (property "Value" "Diode")
    	(descr "SS34")
    	(attr smd)
    	(fp_text reference "D1" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "Diode" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C8678")
    	(fp_line (start -0.88 -1.43) (end -0.88 1.43) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.60 -1.43) (end 2.60 -1.43) (layer F.SilkS) (width 0.15))
    	(fp_line (start 2.59 1.18) (end 2.60 1.41) (layer F.SilkS) (width 0.15))
    	(fp_line (start 2.60 -1.43) (end 2.60 -1.19) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.60 1.43) (end 2.60 1.43) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 2.20 0.00 180.00) (size 2.000 2.000) (layers F.Cu F.Paste F.Mask) (net 1 "boot_cap_1"))
    	(pad 1 smd rect (at -2.20 0.00 180.00) (size 2.000 2.000) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(fp_circle (center -2.61 1.30) (end -2.58 1.30) (layer F.SilkS) (width 0.06))
    	(fp_line (start -2.16 1.30) (end -2.16 -1.30) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -2.16 -1.30) (end 2.16 -1.30) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 2.16 -1.30) (end 2.16 1.30) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 2.16 1.30) (end -2.16 1.30) (layer F.CrtYd) (width 0.05))
    	(fp_poly (pts (xy -2.520010 -1.502410) (xy -2.521331 -1.095807) (xy -2.980868 -1.100328) (xy -2.977210 -1.502410) (xy -2.520010 -1.502410)) (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS"))
    	(fp_poly (pts (xy -2.511781 1.095959) (xy -2.513101 1.502562) (xy -2.972638 1.498041) (xy -2.968981 1.095959) (xy -2.511781 1.095959)) (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS"))
    	(model "${KIPRJMOD}/parts/autogenerated/SS34/SMA_L4.3-W2.6-LS5.2-RD.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:CL05B104KO5NNNC" (layer "F.Cu")
    (uuid f8bef095-f2f7-24b5-e2d5-6e803e62723f)
    (at 44.45 139.7)
    (property "Reference" "C1")
    (property "Value" "100nF +/- 10%")
    	(descr "100nF (104) ±10% 16V")
    	(attr smd)
    	(fp_text reference "C1" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "100nF +/- 10%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C1525")
    	(fp_line (start -0.72 -0.50) (end -0.22 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.87 0.35) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.22 0.50) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.72 0.50) (end 0.22 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.22 -0.50) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.87 -0.35) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 1 "boot_cap_1"))
    	(pad 1 smd rect (at -0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 8 "regulator_BOOT"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 0.87 -0.35) (mid 0.83 -0.46) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 0.72 0.50) (mid 0.83 0.46) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.87 0.35) (mid -0.83 0.46) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.72 -0.50) (mid -0.83 -0.46) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/CL05B104KO5NNNC/C0402_L1.0-W0.5-H0.5.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:CL31A476MQHNNNE" (layer "F.Cu")
    (uuid 382eec82-fe90-4460-5610-503bb696986a)
    (at 107.95 139.7)
    (property "Reference" "C10")
    (property "Value" "47uF +/- 20%")
    	(descr "47uF (476) ±20% 6.3V")
    	(attr smd)
    	(fp_text reference "C10" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "47uF +/- 20%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C68361")
    	(fp_line (start 2.41 -1.09) (end 0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.93 1.09) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 2.56 0.94) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.41 -1.09) (end -0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.93 1.09) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.56 0.94) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 7 "power_5v_h"))
    	(fp_circle (center -1.60 0.80) (end -1.57 0.80) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 2.56 0.94) (mid 2.52 1.05) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 2.41 -1.09) (mid 2.52 -1.05) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.56 0.94) (mid -2.52 1.05) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.41 -1.09) (mid -2.52 -1.05) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.60 0.80) (end -1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -1.60 -0.80) (end 1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 -0.80) (end 1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 0.80) (end -1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/CL31A476MQHNNNE/C1206_L3.2-W1.6-H1.3.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:CL31A476MQHNNNE" (layer "F.Cu")
    (uuid 6d1e4a88-e4bf-2e8f-d63c-c0ff5a593be4)
    (at 127 139.7)
    (property "Reference" "C11")
    (property "Value" "47uF +/- 20%")
    	(descr "47uF (476) ±20% 6.3V")
    	(attr smd)
    	(fp_text reference "C11" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "47uF +/- 20%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C68361")
    	(fp_line (start 2.41 -1.09) (end 0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.93 1.09) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 2.56 0.94) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.41 -1.09) (end -0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.93 1.09) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.56 0.94) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 7 "power_5v_h"))
    	(fp_circle (center -1.60 0.80) (end -1.57 0.80) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 2.56 0.94) (mid 2.52 1.05) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 2.41 -1.09) (mid 2.52 -1.05) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.56 0.94) (mid -2.52 1.05) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.41 -1.09) (mid -2.52 -1.05) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.60 0.80) (end -1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -1.60 -0.80) (end 1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 -0.80) (end 1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 0.80) (end -1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/CL31A476MQHNNNE/C1206_L3.2-W1.6-H1.3.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:P_0402WGF1005TCE" (layer "F.Cu")
    (uuid 6d239b5d-0f53-05bb-e239-a2e781b8af73)
    (at 171.45 139.7)
    (property "Reference" "R4")
    (property "Value" "10000kOhm")
    	(descr "10MΩ (1005) ±1%")
    	(attr smd)
    	(fp_text reference "R4" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "10000kOhm" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C26082")
    	(fp_line (start -0.23 0.50) (end -0.94 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.94 0.50) (end -0.94 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.94 -0.50) (end -0.23 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.23 0.50) (end 0.94 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.94 0.50) (end 0.94 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.94 -0.50) (end 0.23 -0.50) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.43 0.00 0.00) (size 0.566 0.540) (layers F.Cu F.Paste F.Mask) (net 4 "fb_r1_1"))
    	(pad 1 smd rect (at -0.43 0.00 0.00) (size 0.566 0.540) (layers F.Cu F.Paste F.Mask) (net 7 "power_5v_h"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_0402WGF1005TCE/R0402_L1.0-W0.5-H0.4.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:RCT034R7JLF" (layer "F.Cu")
    (uuid 1845093c-230f-12a3-73ef-06027ff95f3f)
    (at 234.95 139.7)
    (property "Reference" "R5")
    (property "Value" "1904.7619047619046")
    	(attr smd)
    	(fp_text reference "R5" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "1904.7619047619046" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C177269")
    	(fp_line (start 0.43 0.66) (end 1.39 0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start 1.39 0.66) (end 1.39 -0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start 1.39 -0.66) (end 0.43 -0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.43 0.66) (end -1.39 0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.39 0.66) (end -1.39 -0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.39 -0.66) (end -0.43 -0.66) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.75 0.00 0.00) (size 0.806 0.864) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -0.75 0.00 0.00) (size 0.806 0.864) (layers F.Cu F.Paste F.Mask) (net 4 "fb_r1_1"))
    	(fp_circle (center -0.80 0.40) (end -0.77 0.40) (layer F.SilkS) (width 0.06))
    	(fp_line (start -0.80 0.40) (end -0.80 -0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.80 -0.40) (end 0.80 -0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.80 -0.40) (end 0.80 0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.80 0.40) (end -0.80 0.40) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/RCT034R7JLF/R0603.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 270))
    	)
  )
(footprint "Schrune:P_0603WAJ0303T5E" (layer "F.Cu")
    (uuid 8c45e8bb-5348-4955-b9b9-a9489d09b028)
    (at 44.45 187.33)
    (property "Reference" "R1")
    (property "Value" "30kohm +/- 1%")
    	(descr "30KΩ (303) ±5%")
    	(attr smd)
    	(fp_text reference "R1" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "30kohm +/- 1%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C18681")
    	(fp_line (start 0.43 0.66) (end 1.39 0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start 1.39 0.66) (end 1.39 -0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start 1.39 -0.66) (end 0.43 -0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.43 0.66) (end -1.39 0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.39 0.66) (end -1.39 -0.66) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.39 -0.66) (end -0.43 -0.66) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.75 0.00 0.00) (size 0.806 0.864) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -0.75 0.00 0.00) (size 0.806 0.864) (layers F.Cu F.Paste F.Mask) (net 2 "comp_c2_1"))
    	(fp_circle (center -0.80 0.40) (end -0.77 0.40) (layer F.SilkS) (width 0.06))
    	(fp_line (start -0.80 0.40) (end -0.80 -0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.80 -0.40) (end 0.80 -0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.80 -0.40) (end 0.80 0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.80 0.40) (end -0.80 0.40) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_0603WAJ0303T5E/R0603.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 270))
    	)
  )
(footprint "Schrune:P_0402CG470J500NT" (layer "F.Cu")
    (uuid d9f9d009-473b-1058-20aa-b72c7fe30d19)
    (at 107.95 187.33)
    (property "Reference" "C9")
    (property "Value" "47pF +/- 5%")
    	(descr "47pF (470) ±5% 50V")
    	(attr smd)
    	(fp_text reference "C9" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "47pF +/- 5%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C1567")
    	(fp_line (start -0.72 -0.50) (end -0.22 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.87 0.35) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.22 0.50) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.72 0.50) (end 0.22 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.22 -0.50) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.87 -0.35) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 9 "regulator_COMP"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 0.87 -0.35) (mid 0.83 -0.46) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 0.72 0.50) (mid 0.83 0.46) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.87 0.35) (mid -0.83 0.46) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.72 -0.50) (mid -0.83 -0.46) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_0402CG470J500NT/C0402_L1.0-W0.5-H0.5.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:P_0402B102K500NT" (layer "F.Cu")
    (uuid 929fd426-f2e3-fe52-b51e-2399fb5f9b2b)
    (at 171.45 187.33)
    (property "Reference" "C5")
    (property "Value" "1nF +/- 10%")
    	(descr "1nF (102) ±10% 50V")
    	(attr smd)
    	(fp_text reference "C5" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "1nF +/- 10%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C1523")
    	(fp_line (start -0.72 -0.50) (end -0.22 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.87 0.35) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.22 0.50) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.72 0.50) (end 0.22 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.22 -0.50) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.87 -0.35) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 2 "comp_c2_1"))
    	(pad 1 smd rect (at -0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 9 "regulator_COMP"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 0.87 -0.35) (mid 0.83 -0.46) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 0.72 0.50) (mid 0.83 0.46) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.87 0.35) (mid -0.83 0.46) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.72 -0.50) (mid -0.83 -0.46) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_0402B102K500NT/C0402_L1.0-W0.5-H0.5.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:P_0402B103K500NT" (layer "F.Cu")
    (uuid f0b2dbd4-d1e0-b898-0184-deae9384989a)
    (at 234.95 187.33)
    (property "Reference" "C2")
    (property "Value" "10nF +/- 10%")
    	(descr "10nF (103) ±10% 50V")
    	(attr smd)
    	(fp_text reference "C2" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "10nF +/- 10%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C1524")
    	(fp_line (start -0.72 -0.50) (end -0.22 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.87 0.35) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.22 0.50) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.72 0.50) (end 0.22 0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.22 -0.50) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.87 -0.35) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -0.42 0.00 0.00) (size 0.500 0.540) (layers F.Cu F.Paste F.Mask) (net 10 "regulator_SS"))
    	(fp_circle (center -0.50 0.25) (end -0.47 0.25) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 0.87 -0.35) (mid 0.83 -0.46) (end 0.72 -0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 0.72 0.50) (mid 0.83 0.46) (end 0.87 0.35) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.87 0.35) (mid -0.83 0.46) (end -0.72 0.50) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -0.72 -0.50) (mid -0.83 -0.46) (end -0.87 -0.35) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.50 0.25) (end -0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.50 -0.25) (end 0.50 -0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 -0.25) (end 0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.50 0.25) (end -0.50 0.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/P_0402B103K500NT/C0402_L1.0-W0.5-H0.5.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:AMS1117_3_3" (layer "F.Cu")
    (uuid 75d69ab6-5dbb-028f-5ddb-6fea2baf6c97)
    (at 44.45 234.95)
    (property "Reference" "U1")
    (property "Value" "AMS1117-3.3")
    	(attr smd)
    	(fp_text reference "U1" (at 0.000 -6.300) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "AMS1117-3.3" (at 0.000 6.300) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C6186")
    	(fp_line (start -1.57 3.33) (end -1.57 -3.33) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.57 -3.33) (end 1.37 -3.33) (layer F.SilkS) (width 0.15))
    	(fp_line (start 1.37 -3.33) (end 1.37 3.33) (layer F.SilkS) (width 0.15))
    	(fp_line (start 1.37 3.33) (end -1.57 3.33) (layer F.SilkS) (width 0.15))
    	(pad 1 smd rect (at 2.97 2.30 0.00) (size 2.500 1.100) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 2 smd rect (at 2.97 0.00 0.00) (size 2.500 1.100) (layers F.Cu F.Paste F.Mask) (net 6 "power_3v3_h"))
    	(pad 3 smd rect (at 2.97 -2.30 0.00) (size 2.500 1.100) (layers F.Cu F.Paste F.Mask) (net 7 "power_5v_h"))
    	(pad 4 smd rect (at -2.97 0.00 0.00) (size 2.340 3.600) (layers F.Cu F.Paste F.Mask))
    	(fp_circle (center 3.40 3.25) (end 3.43 3.25) (layer F.SilkS) (width 0.06))
    	(fp_circle (center 4.55 2.19) (end 4.80 2.19) (layer Cmts.User) (width 0.50))
    	(fp_line (start -1.85 3.25) (end -1.85 -3.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -1.85 -3.25) (end 1.65 -3.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.65 -3.25) (end 1.65 3.25) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.65 3.25) (end -1.85 3.25) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/AMS1117_3_3/SOT-223-4P_L6.5-W3.5-H1.6-LS7.0-P2.30.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 180))
    	)
  )
(footprint "Schrune:CL10A106MQ8NNNC" (layer "F.Cu")
    (uuid e41da923-5b18-570f-bd84-5a0038d95737)
    (at 107.95 234.95)
    (property "Reference" "C4")
    (property "Value" "10uF +/- 20%")
    	(attr smd)
    	(fp_text reference "C4" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "10uF +/- 20%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C1691")
    	(fp_line (start -0.28 0.71) (end -1.08 0.71) (layer F.SilkS) (width 0.25))
    	(fp_line (start 0.28 0.71) (end 1.08 0.71) (layer F.SilkS) (width 0.25))
    	(fp_line (start -0.28 -0.71) (end -1.08 -0.71) (layer F.SilkS) (width 0.25))
    	(fp_line (start 0.28 -0.71) (end 1.08 -0.71) (layer F.SilkS) (width 0.25))
    	(fp_line (start -1.39 0.40) (end -1.39 -0.40) (layer F.SilkS) (width 0.25))
    	(fp_line (start 1.39 -0.40) (end 1.39 0.40) (layer F.SilkS) (width 0.25))
    	(pad 2 smd rect (at 0.70 0.00 0.00) (size 0.800 0.900) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -0.70 0.00 0.00) (size 0.800 0.900) (layers F.Cu F.Paste F.Mask) (net 7 "power_5v_h"))
    	(fp_circle (center -0.80 0.40) (end -0.77 0.40) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 1.39 -0.40) (mid 1.30 -0.62) (end 1.08 -0.71) (layer F.SilkS) (width 0.25))
    	(fp_arc (start 1.08 0.71) (mid 1.30 0.62) (end 1.39 0.40) (layer F.SilkS) (width 0.25))
    	(fp_arc (start -1.39 0.40) (mid -1.30 0.62) (end -1.08 0.71) (layer F.SilkS) (width 0.25))
    	(fp_arc (start -1.08 -0.71) (mid -1.30 -0.62) (end -1.39 -0.40) (layer F.SilkS) (width 0.25))
    	(fp_line (start -0.80 0.40) (end -0.80 -0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -0.80 -0.40) (end 0.80 -0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.80 -0.40) (end 0.80 0.40) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 0.80 0.40) (end -0.80 0.40) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/CL10A106MQ8NNNC/C0603_L1.6-W0.8-H0.8.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
(footprint "Schrune:CL31A226MOHNNNE" (layer "F.Cu")
    (uuid 0bb88020-b0b2-c6f7-f861-b651940d3715)
    (at 171.45 234.95)
    (property "Reference" "C6")
    (property "Value" "22uF +/- 20%")
    	(descr "22uF (226) ±20% 16V")
    	(attr smd)
    	(fp_text reference "C6" (at 0.000 -4.000) (layer F.SilkS)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text value "22uF +/- 20%" (at 0.000 4.000) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(fp_text user %R (at 0 0) (layer F.Fab)
    		(effects (font (size 1 1) (thickness 0.15)))
    	)
    	(property "LCSC Part" "C1934")
    	(fp_line (start 2.41 -1.09) (end 0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 0.93 1.09) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start 2.56 0.94) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.41 -1.09) (end -0.93 -1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -0.93 1.09) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_line (start -2.56 0.94) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(pad 2 smd rect (at 1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 5 "GND"))
    	(pad 1 smd rect (at -1.59 0.00 0.00) (size 1.485 1.728) (layers F.Cu F.Paste F.Mask) (net 6 "power_3v3_h"))
    	(fp_circle (center -1.60 0.80) (end -1.57 0.80) (layer F.SilkS) (width 0.06))
    	(fp_arc (start 2.56 0.94) (mid 2.52 1.05) (end 2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start 2.41 -1.09) (mid 2.52 -1.05) (end 2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.56 0.94) (mid -2.52 1.05) (end -2.41 1.09) (layer F.SilkS) (width 0.15))
    	(fp_arc (start -2.41 -1.09) (mid -2.52 -1.05) (end -2.56 -0.94) (layer F.SilkS) (width 0.15))
    	(fp_line (start -1.60 0.80) (end -1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start -1.60 -0.80) (end 1.60 -0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 -0.80) (end 1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(fp_line (start 1.60 0.80) (end -1.60 0.80) (layer F.CrtYd) (width 0.05))
    	(model "${KIPRJMOD}/parts/autogenerated/CL31A226MOHNNNE/C1206_L3.2-W1.6-H1.3.wrl"
    		(offset (xyz 0.000 0.000 0.000))
    		(scale (xyz 1 1 1))
    		(rotate (xyz 0 0 0))
    	)
  )
	(segment
		(start 168.79 42.5)
		(end 169.55 41.74)
		(width 0.2)
		(layer "F.Cu")
		(net "boot_cap_1")
		(uuid "02875179-2528-4de3-bfa8-cc0518e8776c")
	)
	(segment
		(start 158.25 81.87)
		(end 158.25 42.5)
		(width 0.2)
		(layer "F.Cu")
		(net "boot_cap_1")
		(uuid "0775deae-6a02-4424-a8b0-055ea5871eb8")
	)
	(segment
		(start 168.45 92.07)
		(end 158.25 81.87)
		(width 0.2)
		(layer "F.Cu")
		(net "boot_cap_1")
		(uuid "b43964e0-8018-4c35-9687-3947fb9a20c6")
	)
	(segment
		(start 158.25 42.5)
		(end 168.79 42.5)
		(width 0.2)
		(layer "F.Cu")
		(net "boot_cap_1")
		(uuid "dff10591-4219-419f-83c1-da6bb58a384f")
	)
	(embedded_fonts no)
  (net 0 "")
  (net 1 "boot_cap_1")
  (net 2 "comp_c2_1")
  (net 3 "en_r1_1")
  (net 4 "fb_r1_1")
  (net 5 "GND")
  (net 6 "power_3v3_h")
  (net 7 "power_5v_h")
  (net 8 "regulator_BOOT")
  (net 9 "regulator_COMP")
  (net 10 "regulator_SS")
  (net 11 "VIN_h")
)