(kicad_pcb (version 20240108) (generator "kicad-pcb-editor") (generator_version "8.0") (general (thickness 0.4) (legacy_teardrops no) ) (uuid "22222222-3333-4444-5555-666666666666") (paper "A4") (title_block (title "TactiScript — Wearable Fingertip Haptic Display Ring") (date "2026-07-06") (rev "1.0") (company "jayis1") (comment 1 "Author: jayis1") (comment 2 "Copyright (C) 2026 jayis1") (comment 3 "License: CERN-OHL-S v2") (comment 4 "6-layer rigid-flex, 22mm ring form factor") ) ;; ================================================================ ;; Layers (6-layer rigid-flex stackup) ;; ================================================================ (layers (0 "F.Cu" signal "Top — components + actuator array inner face") (1 "In1.Cu" signal "Inner 1 — signal routing") (2 "In2.Cu" signal "Inner 2 — GND plane") (3 "In3.Cu" signal "Inner 3 — HV routing (120V)") (4 "In4.Cu" signal "Inner 4 — power plane (VBAT/VCC)") (5 "B.Cu" signal "Bottom — Qi coil + OLED + touch") (6 "F.Paste" user) (7 "B.Paste" user) (8 "F.SilkS" user "Silkscreen Top") (9 "B.SilkS" user "Silkscreen Bottom") (10 "F.Mask" user) (11 "B.Mask" user) (12 "Dwgs.User" user "User Drawings") (13 "Cmts.User" user "User Comments") (14 "F.Fab" user) (15 "B.Fab" user) (16 "F.CrtYd" user "Courtyard Top") (17 "B.CrtYd" user "Courtyard Bottom") ) ;; ================================================================ ;; Board setup ;; ================================================================ (setup (stackup (layer "F.Cu" (type "copper") (thickness 0.018)) (layer "dielectric 1" (type "core") (thickness 0.05) (material "FR4")) (layer "In1.Cu" (type "copper") (thickness 0.018)) (layer "dielectric 2" (type "core") (thickness 0.05) (material "FR4")) (layer "In2.Cu" (type "copper") (thickness 0.018)) (layer "dielectric 3" (type "core") (thickness 0.05) (material "Polyimide flex")) (layer "In3.Cu" (type "copper") (thickness 0.018)) (layer "dielectric 4" (type "core") (thickness 0.05) (material "FR4")) (layer "In4.Cu" (type "copper") (thickness 0.018)) (layer "dielectric 5" (type "core") (thickness 0.05) (material "FR4")) (layer "B.Cu" (type "copper") (thickness 0.018)) (copper_finish "ENIG") (dielectric_constraints yes) ) (pad_to_mask_clearance 0.05) (solder_mask_min_width 0.04) (pcbplotparams (layerselection 0x00010fc_ffffffff) (plot_on_all_layers_selection 0x0000000_00000000) (subtract_mask_from_silk no) (outputformat 1) (mirror no) (drillshape 0) (scaleselection 1) (outputdirectory "plots/") ) ) ;; ================================================================ ;; Nets ;; ================================================================ (net 0 "") (net 1 "GND") (net 2 "VBAT") (net 3 "VCC_3V3") (net 4 "HV120V") (net 5 "SPI0_SCK") (net 6 "SPI0_MOSI") (net 7 "SPI0_MISO") (net 8 "SPI0_CS_DRV") (net 9 "SPI1_SCK") (net 10 "SPI1_MOSI") (net 11 "SPI1_MISO") (net 12 "SPI1_CS_IMU") (net 13 "I2C_SCL") (net 14 "I2C_SDA") (net 15 "IMU_INT1") (net 16 "IMU_INT2") (net 17 "HV_BOOST_EN") (net 18 "HV_GATE") (net 19 "DEMUX_A0") (net 20 "DEMUX_A1") (net 21 "DEMUX_A2") (net 22 "DRV_LATCH") (net 23 "LRA_EN") (net 24 "LRA_PWM") (net 25 "LED_R") (net 26 "LED_G") (net 27 "NFC_ANT1") (net 28 "NFC_ANT2") (net 29 "SKIN_SENSE") (net 30 "SKIN_DRIVE") (net 31 "BAT_MON") (net 32 "CHG_STAT") (net 33 "QI_DET") (net 34 "USB_DET") (net 35 "TOUCH_SENSE") (net 36 "TOUCH_DRIVE") (net 37 "PZT_1" "PZT element 1 drive") (net 38 "PZT_2") (net 39 "PZT_3") (net 40 "PZT_4") (net 41 "PZT_5") (net 42 "PZT_6") (net 43 "PZT_7") (net 44 "PZT_8") (net 45 "PZT_9") (net 46 "PZT_10") (net 47 "PZT_11") (net 48 "PZT_12") (net 49 "PZT_13") (net 50 "PZT_14") (net 51 "PZT_15") (net 52 "PZT_16") (net 53 "PZT_17") (net 54 "PZT_18") (net 55 "PZT_19") (net 56 "PZT_20") (net 57 "PZT_21") (net 58 "PZT_22") (net 59 "PZT_23") (net 60 "PZT_24") ;; ================================================================ ;; Footprints — Component placements ;; ================================================================ ;; U1: nRF5340 QFN-94 (footprint "Package_DFN_QFN:QFN-94-1EP_7x7mm_P0.4mm_EP2.9x2.9mm" (layer "F.Cu") (at 100 80) (uuid "fp-0001") (property "Reference" "U1" (at 100 72 0) (effects (font (size 1 1)))) (property "Value" "nRF5340" (at 100 73.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 100 80 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -3.2 -3.2) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 3 "VCC_3V3") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at -3.2 -2.8) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) (pad "40" smd roundrect (at -3.2 3.2) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 5 "SPI0_SCK") (roundrect_rratio 0.25)) (pad "41" smd roundrect (at -3.2 3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 6 "SPI0_MOSI") (roundrect_rratio 0.25)) (pad "42" smd roundrect (at -3.2 4.0) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 8 "SPI0_CS_DRV") (roundrect_rratio 0.25)) (pad "50" smd roundrect (at 3.2 -3.2) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 9 "SPI1_SCK") (roundrect_rratio 0.25)) (pad "51" smd roundrect (at 3.2 -2.8) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 10 "SPI1_MOSI") (roundrect_rratio 0.25)) (pad "52" smd roundrect (at 3.2 -2.4) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 12 "SPI1_CS_IMU") (roundrect_rratio 0.25)) (pad "60" smd roundrect (at 3.2 3.2) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 13 "I2C_SCL") (roundrect_rratio 0.25)) (pad "61" smd roundrect (at 3.2 3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 14 "I2C_SDA") (roundrect_rratio 0.25)) (pad "70" smd roundrect (at -2.0 3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 15 "IMU_INT1") (roundrect_rratio 0.25)) (pad "75" smd roundrect (at 2.0 3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 17 "HV_BOOST_EN") (roundrect_rratio 0.25)) (pad "76" smd roundrect (at 2.4 3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 23 "LRA_EN") (roundrect_rratio 0.25)) (pad "80" smd roundrect (at -2.4 -3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 25 "LED_R") (roundrect_rratio 0.25)) (pad "81" smd roundrect (at -2.0 -3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 26 "LED_G") (roundrect_rratio 0.25)) (pad "90" smd roundrect (at 3.2 -3.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 27 "NFC_ANT1") (roundrect_rratio 0.25)) (pad "91" smd roundrect (at 3.2 3.2) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 28 "NFC_ANT2") (roundrect_rratio 0.25)) ) ;; U2: DRV2700 #1 (TSSOP-16) (footprint "Package_SO:TSSOP-16_4.4x5mm_P0.65mm" (layer "F.Cu") (at 40 60) (uuid "fp-0002") (property "Reference" "U2" (at 40 53 0) (effects (font (size 1 1)))) (property "Value" "DRV2700" (at 40 54.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 40 60 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -2.2 -2.275) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 3 "VCC_3V3") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at -2.2 -1.625) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) (pad "3" smd roundrect (at -2.2 -0.975) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 5 "SPI0_SCK") (roundrect_rratio 0.25)) (pad "4" smd roundrect (at -2.2 -0.325) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 6 "SPI0_MOSI") (roundrect_rratio 0.25)) (pad "5" smd roundrect (at -2.2 0.325) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 8 "SPI0_CS_DRV") (roundrect_rratio 0.25)) (pad "8" smd roundrect (at -2.2 2.275) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 4 "HV120V") (roundrect_rratio 0.25)) (pad "9" smd roundrect (at 2.2 2.275) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 37 "PZT_1") (roundrect_rratio 0.25)) (pad "10" smd roundrect (at 2.2 1.625) (size 0.4 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 38 "PZT_2") (roundrect_rratio 0.25)) ) ;; U8: ICM-42688-P (LGA-14) (footprint "Sensor_Motion:TDK_ICM-42688-P_14-LGA" (layer "F.Cu") (at 130 50) (uuid "fp-0008") (property "Reference" "U8" (at 130 43 0) (effects (font (size 1 1)))) (property "Value" "ICM-42688-P" (at 130 44.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 130 50 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -1.2 -1.0) (size 0.25 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 3 "VCC_3V3") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at -1.2 -0.5) (size 0.25 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) (pad "8" smd roundrect (at 1.2 -0.5) (size 0.25 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 9 "SPI1_SCK") (roundrect_rratio 0.25)) (pad "9" smd roundrect (at 1.2 -1.0) (size 0.25 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 10 "SPI1_MOSI") (roundrect_rratio 0.25)) (pad "10" smd roundrect (at 1.2 0.5) (size 0.25 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 12 "SPI1_CS_IMU") (roundrect_rratio 0.25)) (pad "12" smd roundrect (at 1.2 1.5) (size 0.25 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 15 "IMU_INT1") (roundrect_rratio 0.25)) ) ;; U9: SSD1316 OLED (footprint "Display:OLED_0.49inch_64x32_I2C" (layer "B.Cu") (at 60 60) (uuid "fp-0009") (property "Reference" "U9" (at 60 52 0) (effects (font (size 1 1)))) (property "Value" "SSD1316" (at 60 53.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 60 60 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -2 -1) (size 0.3 0.3) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "GND") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at -1.5 -1) (size 0.3 0.3) (layers "B.Cu" "B.Paste" "B.Mask") (net 3 "VCC_3V3") (roundrect_rratio 0.25)) (pad "3" smd roundrect (at -1.0 -1) (size 0.3 0.3) (layers "B.Cu" "B.Paste" "B.Mask") (net 13 "I2C_SCL") (roundrect_rratio 0.25)) (pad "4" smd roundrect (at -0.5 -1) (size 0.3 0.3) (layers "B.Cu" "B.Paste" "B.Mask") (net 14 "I2C_SDA") (roundrect_rratio 0.25)) ) ;; U10: nPM1300 PMIC (footprint "Package_DFN_QFN:QFN-46-1EP_6x6mm_P0.4mm_EP3.7x3.7mm" (layer "F.Cu") (at 160 60) (uuid "fp-0010") (property "Reference" "U10" (at 160 52 0) (effects (font (size 1 1)))) (property "Value" "nPM1300" (at 160 53.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 160 60 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -2.8 -2.4) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "VBAT") (roundrect_rratio 0.25)) (pad "5" smd roundrect (at -2.8 -0.8) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 3 "VCC_3V3") (roundrect_rratio 0.25)) (pad "10" smd roundrect (at -2.8 1.2) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 14 "I2C_SDA") (roundrect_rratio 0.25)) (pad "11" smd roundrect (at -2.8 1.6) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 13 "I2C_SCL") (roundrect_rratio 0.25)) (pad "20" smd roundrect (at 2.8 2.0) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 32 "CHG_STAT") (roundrect_rratio 0.25)) (pad "30" smd roundrect (at 2.8 -2.0) (size 0.3 0.3) (layers "F.Cu" "F.Paste" "F.Mask") (net 33 "QI_DET") (roundrect_rratio 0.25)) ) ;; PZT actuator array (24 elements, 4×6 grid) ;; Each element is a small SMD pad connecting to the HV drive line. (footprint "TactiScript:PZT_Bimorph_4x6_Array" (layer "F.Cu") (at 100 100) (uuid "fp-0011") (property "Reference" "Q1" (at 100 92 0) (effects (font (size 1 1)))) (property "Value" "PZT_4x6" (at 100 93.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 100 100 0) (effects (font (size 0.5 0.5)) hide)) ;; 24 pads for PZT elements (row-major: row0col0..row3col5) (pad "1" smd circle (at -3.75 -2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 37 "PZT_1")) (pad "2" smd circle (at -2.25 -2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 38 "PZT_2")) (pad "3" smd circle (at -0.75 -2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 39 "PZT_3")) (pad "4" smd circle (at 0.75 -2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 40 "PZT_4")) (pad "5" smd circle (at 2.25 -2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 41 "PZT_5")) (pad "6" smd circle (at 3.75 -2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 42 "PZT_6")) (pad "7" smd circle (at -3.75 -0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 43 "PZT_7")) (pad "8" smd circle (at -2.25 -0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 44 "PZT_8")) (pad "9" smd circle (at -0.75 -0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 45 "PZT_9")) (pad "10" smd circle (at 0.75 -0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 46 "PZT_10")) (pad "11" smd circle (at 2.25 -0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 47 "PZT_11")) (pad "12" smd circle (at 3.75 -0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 48 "PZT_12")) (pad "13" smd circle (at -3.75 0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 49 "PZT_13")) (pad "14" smd circle (at -2.25 0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 50 "PZT_14")) (pad "15" smd circle (at -0.75 0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 51 "PZT_15")) (pad "16" smd circle (at 0.75 0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 52 "PZT_16")) (pad "17" smd circle (at 2.25 0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 53 "PZT_17")) (pad "18" smd circle (at 3.75 0.75) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 54 "PZT_18")) (pad "19" smd circle (at -3.75 2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 55 "PZT_19")) (pad "20" smd circle (at -2.25 2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 56 "PZT_20")) (pad "21" smd circle (at -0.75 2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 57 "PZT_21")) (pad "22" smd circle (at 0.75 2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 58 "PZT_22")) (pad "23" smd circle (at 2.25 2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 59 "PZT_23")) (pad "24" smd circle (at 3.75 2.25) (size 0.5 0.5) (layers "F.Cu" "F.Paste") (net 60 "PZT_24")) ) ;; L1: Qi receiver coil (footprint "TactiScript:Qi_RX_Coil_15mm" (layer "B.Cu") (at 160 30) (uuid "fp-0012") (property "Reference" "L1" (at 160 22 0) (effects (font (size 1 1)))) (property "Value" "Qi_RX" (at 160 23.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 160 30 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -5 0) (size 1 1) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "VBAT") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at 5 0) (size 1 1) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) ;; BAT1: LiPo battery pads (footprint "Battery:BatteryHolder_BSH-12-1" (layer "F.Cu") (at 180 60) (uuid "fp-0013") (property "Reference" "BAT1" (at 180 52 0) (effects (font (size 1 1)))) (property "Value" "120mAh_LiPo" (at 180 53.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 180 60 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -3 0) (size 1.5 2) (layers "F.Cu" "F.Paste" "F.Mask") (net 2 "VBAT") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at 3 0) (size 1.5 2) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) ;; D1: Red LED (footprint "LED_SMD:LED_0603_1608Metric" (layer "B.Cu") (at 170 90) (uuid "fp-0014") (property "Reference" "D1" (at 170 84 0) (effects (font (size 1 1)))) (property "Value" "LED_Red" (at 170 85.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 170 90 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -0.4 0) (size 0.6 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (net 25 "LED_R") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at 0.4 0) (size 0.6 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) ;; D2: Green LED (footprint "LED_SMD:LED_0603_1608Metric" (layer "B.Cu") (at 180 90) (uuid "fp-0015") (property "Reference" "D2" (at 180 84 0) (effects (font (size 1 1)))) (property "Value" "LED_Green" (at 180 85.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 180 90 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -0.4 0) (size 0.6 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (net 26 "LED_G") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at 0.4 0) (size 0.6 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) ;; Y1: 32 MHz crystal (footprint "Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm" (layer "F.Cu") (at 130 80) (uuid "fp-0016") (property "Reference" "Y1" (at 130 74 0) (effects (font (size 1 1)))) (property "Value" "32MHz" (at 130 75.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 130 80 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -1.1 -0.8) (size 1 0.9) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) (pad "3" smd roundrect (at 1.1 0.8) (size 1 0.9) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) ;; Y2: 32.768 kHz crystal (footprint "Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm" (layer "F.Cu") (at 140 80) (uuid "fp-0017") (property "Reference" "Y2" (at 140 74 0) (effects (font (size 1 1)))) (property "Value" "32.768kHz" (at 140 75.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 140 80 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -1.25 0) (size 1 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at 1.25 0) (size 1 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) ;; Decoupling caps (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 90 75) (uuid "fp-0018") (property "Reference" "C1" (at 90 71 0) (effects (font (size 0.8 0.8)))) (property "Value" "100nF" (at 90 72.5 0) (effects (font (size 0.6 0.6)))) (property "Author" "jayis1" (at 90 75 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask") (net 3 "VCC_3V3") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at 0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) (footprint "Capacitor_SMD:C_1206_3216Metric" (layer "F.Cu") (at 30 60) (uuid "fp-0019") (property "Reference" "C3" (at 30 54 0) (effects (font (size 0.8 0.8)))) (property "Value" "4.7uF_120V" (at 30 55.5 0) (effects (font (size 0.6 0.6)))) (property "Author" "jayis1" (at 30 60 0) (effects (font (size 0.5 0.5)) hide)) (pad "1" smd roundrect (at -1.6 0) (size 1.5 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 4 "HV120V") (roundrect_rratio 0.25)) (pad "2" smd roundrect (at 1.6 0) (size 1.5 1.6) (layers "F.Cu" "F.Paste" "F.Mask") (net 1 "GND") (roundrect_rratio 0.25)) ) ;; J1: USB-C connector (footprint "Connector_USB:USB_C_Receptacle_GCT_USB4105" (layer "B.Cu") (at 200 30) (uuid "fp-0020") (property "Reference" "J1" (at 200 18 0) (effects (font (size 1 1)))) (property "Value" "USB-C" (at 200 19.5 0) (effects (font (size 0.8 0.8)))) (property "Author" "jayis1" (at 200 30 0) (effects (font (size 0.5 0.5)) hide)) (pad "A1" smd roundrect (at -3.5 -1) (size 0.3 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (net 1 "GND") (roundrect_rratio 0.25)) (pad "A4" smd roundrect (at -2.5 -1) (size 0.3 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "VBAT") (roundrect_rratio 0.25)) (pad "B12" smd roundrect (at 3.5 -1) (size 0.3 0.8) (layers "B.Cu" "B.Paste" "B.Mask") (net 2 "VBAT") (roundrect_rratio 0.25)) ) ;; ================================================================ ;; Tracks (representative routing) ;; ================================================================ ;; SPI0 bus: U1 → DRV2700 chain (segment (start 96.8 83.2) (end 40 60) (width 0.15) (layer "In1.Cu") (net 5) (uuid "trk-0001")) (segment (start 97.2 83.6) (end 42 62) (width 0.15) (layer "In1.Cu") (net 6) (uuid "trk-0002")) ;; SPI1 bus: U1 → IMU (segment (start 103.2 76.8) (end 128.8 49.5) (width 0.15) (layer "F.Cu") (net 9) (uuid "trk-0003")) ;; I2C bus: U1 → OLED + PMIC (segment (start 103.6 83.6) (end 59 59) (width 0.15) (layer "In1.Cu") (net 13) (uuid "trk-0004")) (segment (start 103.6 83.2) (end 157.2 61.6) (width 0.15) (layer "In1.Cu") (net 14) (uuid "trk-0005")) ;; HV route: DRV2700 → PZT array (on In3.Cu for isolation) (segment (start 42 62.275) (end 100 100) (width 0.3) (layer "In3.Cu") (net 37) (uuid "trk-0006")) ;; VBAT power route (on In4.Cu power plane) (segment (start 180 60) (end 157.2 57.6) (width 0.3) (layer "In4.Cu") (net 2) (uuid "trk-0007")) ;; VCC_3V3 from PMIC to MCU (segment (start 157.2 59.2) (end 96.8 76.8) (width 0.2) (layer "In4.Cu") (net 3) (uuid "trk-0008")) ;; LED routes (segment (start 97.6 76.4) (end 169.6 90) (width 0.15) (layer "In1.Cu") (net 25) (uuid "trk-0009")) (segment (start 98.0 76.4) (end 179.6 90) (width 0.15) (layer "In1.Cu") (net 26) (uuid "trk-0010")) ;; IMU interrupt (segment (start 98.4 83.6) (end 131.2 51.5) (width 0.15) (layer "F.Cu") (net 15) (uuid "trk-0011")) ;; LRA enable (segment (start 102.4 83.6) (end 30 110) (width 0.15) (layer "In1.Cu") (net 23) (uuid "trk-0012")) ;; ================================================================ ;; Vias (representative) ;; ================================================================ (via (at 90 80) (size 0.3) (drill 0.15) (layers "F.Cu" "B.Cu") (net 1) (uuid "via-0001")) (via (at 110 80) (size 0.3) (drill 0.15) (layers "F.Cu" "B.Cu") (net 1) (uuid "via-0002")) (via (at 100 70) (size 0.3) (drill 0.15) (layers "F.Cu" "In2.Cu") (net 1) (uuid "via-0003")) (via (at 160 65) (size 0.4) (drill 0.2) (layers "F.Cu" "In4.Cu") (net 2) (uuid "via-0004")) ;; ================================================================ ;; Zones (copper pours) ;; ================================================================ (zone (net 1) (net_name "GND") (layer "In2.Cu") (uuid "zone-0001") (hatch edge 0.5) (connect_pads (clearance 0.2)) (min_thickness 0.15) (filled_areas_thickness no) (fill yes (thermal_gap 0.2) (thermal_bridge_width 0.3)) (polygon (pts (xy 10 10) (xy 210 10) (xy 210 110) (xy 10 110) ) ) ) (zone (net 2) (net_name "VBAT") (layer "In4.Cu") (uuid "zone-0002") (hatch edge 0.5) (connect_pads (clearance 0.2)) (min_thickness 0.15) (filled_areas_thickness no) (fill yes (thermal_gap 0.2) (thermal_bridge_width 0.3)) (polygon (pts (xy 150 50) (xy 200 50) (xy 200 70) (xy 150 70) ) ) ) ;; ================================================================ ;; Board outline (ring shape, simplified as rounded rectangle) ;; ================================================================ (gr_line (start 10 10) (end 210 10) (stroke (width 0.1)) (layer "Edge.Cuts") (uuid "edge-0001")) (gr_line (start 210 10) (end 210 110) (stroke (width 0.1)) (layer "Edge.Cuts") (uuid "edge-0002")) (gr_line (start 210 110) (end 10 110) (stroke (width 0.1)) (layer "Edge.Cuts") (uuid "edge-0003")) (gr_line (start 10 110) (end 10 10) (stroke (width 0.1)) (layer "Edge.Cuts") (uuid "edge-0004")) ;; ================================================================ ;; Silkscreen text ;; ================================================================ (gr_text "TactiScript v1.0" (at 20 105) (layer "F.SilkS") (effects (font (size 1.5 1.5)) (justify left))) (gr_text "Author: jayis1" (at 20 107) (layer "F.SilkS") (effects (font (size 1 0.8)) (justify left))) (gr_text "(C) 2026 jayis1 CERN-OHL-S v2" (at 20 109) (layer "F.SilkS") (effects (font (size 0.7 0.7)) (justify left))) (gr_text "HV 120V — KEEP CLEAR" (at 30 55) (layer "F.SilkS") (effects (font (size 0.8 0.8)) (justify left))) (gr_text "PZT Array 4x6" (at 100 92) (layer "F.SilkS") (effects (font (size 1 1)) (justify center))) )