(kicad_pcb (version 20171130) (host pcbnew "(5.0.2-5)-5") (general (thickness 1.6) (drawings 20) (tracks 119) (zones 0) (modules 88) (nets 62) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user) (35 F.Paste user) (36 B.SilkS user hide) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user hide) (49 F.Fab user hide) ) (setup (last_trace_width 0.45) (trace_clearance 0.2) (zone_clearance 0.25) (zone_45_only no) (trace_min 0.2) (segment_width 0.2) (edge_width 0.1) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.15) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 1.5 1.5) (pad_drill 0.6) (pad_to_mask_clearance 0) (solder_mask_min_width 0.25) (aux_axis_origin 0 0) (visible_elements FFFFF77F) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes false) (usegerberadvancedattributes false) (creategerberjobfile false) (excludeedgelayer true) (linewidth 0.050000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 GND) (net 2 /VBUS) (net 3 /VBAT) (net 4 "Net-(BAT_R1-Pad1)") (net 5 "Net-(BAT_R2-Pad1)") (net 6 "Net-(BAT_R2-Pad2)") (net 7 /SCL) (net 8 /SDA) (net 9 /PWR_CC) (net 10 "Net-(BAT_U1-Pad6)") (net 11 /VDD) (net 12 "Net-(C2-Pad2)") (net 13 "Net-(CONN_USB1-Pad1)") (net 14 /D-) (net 15 /D+) (net 16 "Net-(CONN_USB1-Pad6)") (net 17 "Net-(HELLO_LED1-Pad2)") (net 18 /HELLO) (net 19 /SWIO) (net 20 /SWCLK) (net 21 /RESET) (net 22 "Net-(LED_B1-Pad1)") (net 23 "Net-(LED_B1-Pad2)") (net 24 "Net-(LED_G1-Pad2)") (net 25 "Net-(LED_G1-Pad1)") (net 26 "Net-(LED_R1-Pad1)") (net 27 "Net-(LED_R1-Pad2)") (net 28 "Net-(LED_W1-Pad2)") (net 29 "Net-(LED_W1-Pad1)") (net 30 "Net-(LED_W2-Pad2)") (net 31 "Net-(LED_W3-Pad2)") (net 32 /VCC) (net 33 /V_LED) (net 34 "Net-(PWR_CONN1-Pad2)") (net 35 "Net-(PWR_R1-Pad1)") (net 36 "Net-(Q1-Pad1)") (net 37 "Net-(Q1-Pad3)") (net 38 "Net-(Q2-Pad3)") (net 39 "Net-(Q2-Pad1)") (net 40 "Net-(Q3-Pad1)") (net 41 "Net-(Q3-Pad3)") (net 42 /LED_B) (net 43 /LED_G) (net 44 /LED_R) (net 45 /LED_W1) (net 46 /LED_W2) (net 47 /LED_W3) (net 48 "Net-(J2-Pad1)") (net 49 "Net-(J2-Pad2)") (net 50 "Net-(J2-Pad4)") (net 51 "Net-(J2-Pad6)") (net 52 "Net-(J2-Pad11)") (net 53 "Net-(J2-Pad8)") (net 54 "Net-(J2-Pad10)") (net 55 "Net-(J2-Pad12)") (net 56 /IN1) (net 57 /IN2) (net 58 /IN3) (net 59 "Net-(IN_J1-Pad1)") (net 60 "Net-(IN_J1-Pad3)") (net 61 "Net-(IN_J1-Pad5)") (net_class Default "This is the default net class." (clearance 0.2) (trace_width 0.45) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net /HELLO) (add_net /IN1) (add_net /IN2) (add_net /IN3) (add_net /LED_B) (add_net /LED_G) (add_net /LED_R) (add_net /LED_W1) (add_net /LED_W2) (add_net /LED_W3) (add_net /PWR_CC) (add_net /RESET) (add_net /SCL) (add_net /SDA) (add_net /SWCLK) (add_net /SWIO) (add_net /VBAT) (add_net /VBUS) (add_net /VCC) (add_net /VDD) (add_net /V_LED) (add_net GND) (add_net "Net-(BAT_R1-Pad1)") (add_net "Net-(BAT_R2-Pad1)") (add_net "Net-(BAT_R2-Pad2)") (add_net "Net-(BAT_U1-Pad6)") (add_net "Net-(C2-Pad2)") (add_net "Net-(HELLO_LED1-Pad2)") (add_net "Net-(IN_J1-Pad1)") (add_net "Net-(IN_J1-Pad3)") (add_net "Net-(IN_J1-Pad5)") (add_net "Net-(J2-Pad1)") (add_net "Net-(J2-Pad10)") (add_net "Net-(J2-Pad11)") (add_net "Net-(J2-Pad12)") (add_net "Net-(J2-Pad2)") (add_net "Net-(J2-Pad4)") (add_net "Net-(J2-Pad6)") (add_net "Net-(J2-Pad8)") (add_net "Net-(LED_B1-Pad1)") (add_net "Net-(LED_B1-Pad2)") (add_net "Net-(LED_G1-Pad1)") (add_net "Net-(LED_G1-Pad2)") (add_net "Net-(LED_R1-Pad1)") (add_net "Net-(LED_R1-Pad2)") (add_net "Net-(LED_W1-Pad1)") (add_net "Net-(LED_W1-Pad2)") (add_net "Net-(LED_W2-Pad2)") (add_net "Net-(LED_W3-Pad2)") (add_net "Net-(PWR_CONN1-Pad2)") (add_net "Net-(PWR_R1-Pad1)") (add_net "Net-(Q1-Pad1)") (add_net "Net-(Q1-Pad3)") (add_net "Net-(Q2-Pad1)") (add_net "Net-(Q2-Pad3)") (add_net "Net-(Q3-Pad1)") (add_net "Net-(Q3-Pad3)") ) (net_class D+ "" (clearance 0.2) (trace_width 0.2) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net /D+) (add_net /D-) (add_net "Net-(CONN_USB1-Pad1)") (add_net "Net-(CONN_USB1-Pad6)") ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0435A) (at 164.218919 109.555214 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DECFCB8) (attr smd) (fp_text reference C4 (at 0 -1.65 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /VDD)) (pad 1 smd roundrect (at -0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A96) (at 173.25 87.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A88) (at 182.25 87.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A7A) (at 182.25 78.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A6C) (at 173.25 78.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A5E) (at 173.25 105.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A50) (at 182.25 105.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A42) (at 182.25 114.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A34) (at 173.25 114.5) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A24) (at 136.5 101) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A16) (at 145.5 101) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD5A08) (at 145.5 92) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B4B45C8) (tstamp 5DCBAC57) (at 177.75 83 315) (descr "Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags "diode handsolder") (path /5C41551E) (attr smd) (fp_text reference LED_W2 (at 0 -1.82 315) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED_W (at 0 1.82 315) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.6 -0.8) (end -1.2 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.2 -0.8) (end -1.6 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.4) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -1.135) (end -2.46 -1.135) (layer F.SilkS) (width 0.12)) (fp_line (start -2.46 -1.135) (end -2.46 1.135) (layer F.SilkS) (width 0.12)) (fp_line (start -2.46 1.135) (end 1.6 1.135) (layer F.SilkS) (width 0.12)) (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 315) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4875 0 315) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439) (net 29 "Net-(LED_W1-Pad1)")) (pad 2 smd roundrect (at 1.4875 0 315) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439) (net 30 "Net-(LED_W2-Pad2)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_1.27mm:PinHeader_2x06_P1.27mm_Vertical (layer F.Cu) (tedit 59FED6E3) (tstamp 5DCBABB3) (at 176.25 93.25) (descr "Through hole straight pin header, 2x06, 1.27mm pitch, double rows") (tags "Through hole pin header THT 2x06 1.27mm double row") (path /5DBC197D) (fp_text reference J2 (at -2.75 3.25) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_02x06_Row_Letter_Last (at 0.635 8.045) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.2175 -0.635) (end 2.34 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 2.34 -0.635) (end 2.34 6.985) (layer F.Fab) (width 0.1)) (fp_line (start 2.34 6.985) (end -1.07 6.985) (layer F.Fab) (width 0.1)) (fp_line (start -1.07 6.985) (end -1.07 0.2175) (layer F.Fab) (width 0.1)) (fp_line (start -1.07 0.2175) (end -0.2175 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.13 7.045) (end -0.30753 7.045) (layer F.SilkS) (width 0.12)) (fp_line (start 1.57753 7.045) (end 2.4 7.045) (layer F.SilkS) (width 0.12)) (fp_line (start 0.30753 7.045) (end 0.96247 7.045) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 0.76) (end -1.13 7.045) (layer F.SilkS) (width 0.12)) (fp_line (start 2.4 -0.695) (end 2.4 7.045) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 0.76) (end -0.563471 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 0.563471 0.76) (end 0.706529 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 0.706529) (end 0.76 0.563471) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 -0.563471) (end 0.76 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 -0.695) (end 0.96247 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start 1.57753 -0.695) (end 2.4 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 0) (end -1.13 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 -0.76) (end 0 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -1.15) (end -1.6 7.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.6 7.5) (end 2.85 7.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.85 7.5) (end 2.85 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.85 -1.15) (end -1.6 -1.15) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.635 3.175 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 48 "Net-(J2-Pad1)")) (pad 2 thru_hole oval (at 1.27 0) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 49 "Net-(J2-Pad2)")) (pad 3 thru_hole oval (at 0 1.27) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 48 "Net-(J2-Pad1)")) (pad 4 thru_hole oval (at 1.27 1.27) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 50 "Net-(J2-Pad4)")) (pad 5 thru_hole oval (at 0 2.54) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 48 "Net-(J2-Pad1)")) (pad 6 thru_hole oval (at 1.27 2.54) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 51 "Net-(J2-Pad6)")) (pad 7 thru_hole oval (at 0 3.81) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 52 "Net-(J2-Pad11)")) (pad 8 thru_hole oval (at 1.27 3.81) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 53 "Net-(J2-Pad8)")) (pad 9 thru_hole oval (at 0 5.08) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 52 "Net-(J2-Pad11)")) (pad 10 thru_hole oval (at 1.27 5.08) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 54 "Net-(J2-Pad10)")) (pad 11 thru_hole oval (at 0 6.35) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 52 "Net-(J2-Pad11)")) (pad 12 thru_hole oval (at 1.27 6.35) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 55 "Net-(J2-Pad12)")) (model ${KISYS3DMOD}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_2x06_P1.27mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DBDCDC4) (at 176 91) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5D895CF1) (attr smd) (fp_text reference RW2-1 (at 0 -1.82) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 49 "Net-(J2-Pad2)")) (pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SO-8_3.9x4.9mm_P1.27mm locked (layer F.Cu) (tedit 5DBCC40E) (tstamp 5DCBAE49) (at 168 101) (descr "SO, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SO SO") (path /5D82B2DF) (attr smd) (fp_text reference Q3 (at 0 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Q_DUAL_NMOS (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (pad 1 smd roundrect (at -2.575 -1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 "Net-(Q3-Pad1)")) (pad 2 smd roundrect (at -2.575 -0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -2.575 0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 41 "Net-(Q3-Pad3)")) (pad 4 smd roundrect (at -2.575 1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 22 "Net-(LED_B1-Pad1)")) (pad 5 smd roundrect (at 2.575 1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 6 smd roundrect (at 2.575 0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 52 "Net-(J2-Pad11)")) (pad 7 smd roundrect (at 2.575 -0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 8 smd roundrect (at 2.575 -1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (model ${KISYS3DMOD}/Package_SO.3dshapes/SO-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm (layer F.Cu) (tedit 5C13ED69) (tstamp 5DCBAA6C) (at 140 103.5 270) (descr "DFN, 6 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/(DCB6)%20DFN%2005-08-1715%20Rev%20A.pdf), generated with kicad-footprint-generator ipc_dfn_qfn_generator.py") (tags "DFN DFN_QFN") (path /5DBCB831) (attr smd) (fp_text reference BAT_U1 (at 0 -1.95 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LTC2942-1 (at 0 1.95 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0 -1.11) (end 1.5 -1.11) (layer F.SilkS) (width 0.12)) (fp_line (start -1.5 1.11) (end 1.5 1.11) (layer F.SilkS) (width 0.12)) (fp_line (start -1 -1) (end 1.5 -1) (layer F.Fab) (width 0.1)) (fp_line (start 1.5 -1) (end 1.5 1) (layer F.Fab) (width 0.1)) (fp_line (start 1.5 1) (end -1.5 1) (layer F.Fab) (width 0.1)) (fp_line (start -1.5 1) (end -1.5 -0.5) (layer F.Fab) (width 0.1)) (fp_line (start -1.5 -0.5) (end -1 -1) (layer F.Fab) (width 0.1)) (fp_line (start -2.1 -1.25) (end -2.1 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.1 1.25) (end 2.1 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.1 1.25) (end 2.1 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.1 -1.25) (end -2.1 -1.25) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.75 0.75) (thickness 0.11))) ) (pad 7 smd roundrect (at 0 0 270) (size 1.65 1.35) (layers F.Cu F.Mask) (roundrect_rratio 0.185185)) (pad "" smd roundrect (at -0.41 -0.34 270) (size 0.67 0.54) (layers F.Paste) (roundrect_rratio 0.25)) (pad "" smd roundrect (at -0.41 0.34 270) (size 0.67 0.54) (layers F.Paste) (roundrect_rratio 0.25)) (pad "" smd roundrect (at 0.41 -0.34 270) (size 0.67 0.54) (layers F.Paste) (roundrect_rratio 0.25)) (pad "" smd roundrect (at 0.41 0.34 270) (size 0.67 0.54) (layers F.Paste) (roundrect_rratio 0.25)) (pad 1 smd roundrect (at -1.4375 -0.5 270) (size 0.825 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 /VBAT)) (pad 2 smd roundrect (at -1.4375 0 270) (size 0.825 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -1.4375 0.5 270) (size 0.825 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 /SCL)) (pad 4 smd roundrect (at 1.4375 0.5 270) (size 0.825 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 /SDA)) (pad 5 smd roundrect (at 1.4375 0 270) (size 0.825 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 /PWR_CC)) (pad 6 smd roundrect (at 1.4375 -0.5 270) (size 0.825 0.25) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 "Net-(BAT_U1-Pad6)")) (model ${KISYS3DMOD}/Package_DFN_QFN.3dshapes/DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DBEEE0B) (at 126.25 110) (descr "5-pin SOT23 package") (tags SOT-23-5) (path /5D8283BA) (attr smd) (fp_text reference BAT_U2 (at 0 2.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MCP73831-2-OT (at 0 2.9) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (fp_line (start -0.9 1.61) (end 0.9 1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0.9 -1.61) (end -1.55 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -1.9 -1.8) (end 1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 -1.8) (end 1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 1.8) (end -1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.9 1.8) (end -1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.9 -0.9) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 -1.55) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 -0.9) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 1.55) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 -1.55) (end 0.9 1.55) (layer F.Fab) (width 0.1)) (pad 1 smd rect (at -1.1 -0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 6 "Net-(BAT_R2-Pad2)")) (pad 2 smd rect (at -1.1 0) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 3 smd rect (at -1.1 0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 3 /VBAT)) (pad 4 smd rect (at 1.1 0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 2 /VBUS)) (pad 5 smd rect (at 1.1 -0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 4 "Net-(BAT_R1-Pad1)")) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal (layer B.Cu) (tedit 5B7745C6) (tstamp 5DCBAAF4) (at 117.25 104.25) (descr "JST PH series connector, S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator") (tags "connector JST PH top entry") (path /5D8283C3) (fp_text reference CONN_BAT1 (at 1 2.55) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value CONN_BAT (at 1 -7.45) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -0.86 -0.14) (end -1.14 -0.14) (layer B.SilkS) (width 0.12)) (fp_line (start -1.14 -0.14) (end -1.14 1.46) (layer B.SilkS) (width 0.12)) (fp_line (start -1.14 1.46) (end -2.06 1.46) (layer B.SilkS) (width 0.12)) (fp_line (start -2.06 1.46) (end -2.06 -6.36) (layer B.SilkS) (width 0.12)) (fp_line (start -2.06 -6.36) (end 4.06 -6.36) (layer B.SilkS) (width 0.12)) (fp_line (start 4.06 -6.36) (end 4.06 1.46) (layer B.SilkS) (width 0.12)) (fp_line (start 4.06 1.46) (end 3.14 1.46) (layer B.SilkS) (width 0.12)) (fp_line (start 3.14 1.46) (end 3.14 -0.14) (layer B.SilkS) (width 0.12)) (fp_line (start 3.14 -0.14) (end 2.86 -0.14) (layer B.SilkS) (width 0.12)) (fp_line (start 0.5 -6.36) (end 0.5 -2) (layer B.SilkS) (width 0.12)) (fp_line (start 0.5 -2) (end 1.5 -2) (layer B.SilkS) (width 0.12)) (fp_line (start 1.5 -2) (end 1.5 -6.36) (layer B.SilkS) (width 0.12)) (fp_line (start -2.06 -0.14) (end -1.14 -0.14) (layer B.SilkS) (width 0.12)) (fp_line (start 4.06 -0.14) (end 3.14 -0.14) (layer B.SilkS) (width 0.12)) (fp_line (start -1.3 -2.5) (end -1.3 -4.1) (layer B.SilkS) (width 0.12)) (fp_line (start -1.3 -4.1) (end -0.3 -4.1) (layer B.SilkS) (width 0.12)) (fp_line (start -0.3 -4.1) (end -0.3 -2.5) (layer B.SilkS) (width 0.12)) (fp_line (start -0.3 -2.5) (end -1.3 -2.5) (layer B.SilkS) (width 0.12)) (fp_line (start 3.3 -2.5) (end 3.3 -4.1) (layer B.SilkS) (width 0.12)) (fp_line (start 3.3 -4.1) (end 2.3 -4.1) (layer B.SilkS) (width 0.12)) (fp_line (start 2.3 -4.1) (end 2.3 -2.5) (layer B.SilkS) (width 0.12)) (fp_line (start 2.3 -2.5) (end 3.3 -2.5) (layer B.SilkS) (width 0.12)) (fp_line (start -0.3 -4.1) (end -0.3 -6.36) (layer B.SilkS) (width 0.12)) (fp_line (start -0.8 -4.1) (end -0.8 -6.36) (layer B.SilkS) (width 0.12)) (fp_line (start -2.45 1.85) (end -2.45 -6.75) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.45 -6.75) (end 4.45 -6.75) (layer B.CrtYd) (width 0.05)) (fp_line (start 4.45 -6.75) (end 4.45 1.85) (layer B.CrtYd) (width 0.05)) (fp_line (start 4.45 1.85) (end -2.45 1.85) (layer B.CrtYd) (width 0.05)) (fp_line (start -1.25 -0.25) (end -1.25 1.35) (layer B.Fab) (width 0.1)) (fp_line (start -1.25 1.35) (end -1.95 1.35) (layer B.Fab) (width 0.1)) (fp_line (start -1.95 1.35) (end -1.95 -6.25) (layer B.Fab) (width 0.1)) (fp_line (start -1.95 -6.25) (end 3.95 -6.25) (layer B.Fab) (width 0.1)) (fp_line (start 3.95 -6.25) (end 3.95 1.35) (layer B.Fab) (width 0.1)) (fp_line (start 3.95 1.35) (end 3.25 1.35) (layer B.Fab) (width 0.1)) (fp_line (start 3.25 1.35) (end 3.25 -0.25) (layer B.Fab) (width 0.1)) (fp_line (start 3.25 -0.25) (end -1.25 -0.25) (layer B.Fab) (width 0.1)) (fp_line (start -0.86 -0.14) (end -0.86 1.075) (layer B.SilkS) (width 0.12)) (fp_line (start 0 -0.875) (end -0.5 -1.375) (layer B.Fab) (width 0.1)) (fp_line (start -0.5 -1.375) (end 0.5 -1.375) (layer B.Fab) (width 0.1)) (fp_line (start 0.5 -1.375) (end 0 -0.875) (layer B.Fab) (width 0.1)) (fp_text user %R (at 1 -2.5) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad 1 thru_hole roundrect (at 0 0) (size 1.2 1.75) (drill 0.75) (layers *.Cu *.Mask) (roundrect_rratio 0.208333) (net 10 "Net-(BAT_U1-Pad6)")) (pad 2 thru_hole oval (at 2 0) (size 1.2 1.75) (drill 0.75) (layers *.Cu *.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHoles (layer F.Cu) (tedit 5DBE038F) (tstamp 5DCD8C3D) (at 137.75 110.85 270) (descr "USB Micro-B receptacle, http://www.mouser.com/ds/2/445/629105150521-469306.pdf") (tags "usb micro receptacle") (path /5D828370) (attr smd) (fp_text reference CONN_USB1 (at 0 -3.5 270) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value USB (at 0 5.6 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -4 -2.25) (end -4 3.15) (layer F.Fab) (width 0.15)) (fp_line (start -4 3.15) (end -3.7 3.15) (layer F.Fab) (width 0.15)) (fp_line (start -3.7 3.15) (end -3.7 4.35) (layer F.Fab) (width 0.15)) (fp_line (start -3.7 4.35) (end 3.7 4.35) (layer F.Fab) (width 0.15)) (fp_line (start 3.7 4.35) (end 3.7 3.15) (layer F.Fab) (width 0.15)) (fp_line (start 3.7 3.15) (end 4 3.15) (layer F.Fab) (width 0.15)) (fp_line (start 4 3.15) (end 4 -2.25) (layer F.Fab) (width 0.15)) (fp_line (start 4 -2.25) (end -4 -2.25) (layer F.Fab) (width 0.15)) (fp_line (start -2.7 3.75) (end 2.7 3.75) (layer F.Fab) (width 0.15)) (fp_line (start -1.075 -2.725) (end -1.3 -2.55) (layer F.Fab) (width 0.15)) (fp_line (start -1.3 -2.55) (end -1.525 -2.725) (layer F.Fab) (width 0.15)) (fp_line (start -1.525 -2.725) (end -1.525 -2.95) (layer F.Fab) (width 0.15)) (fp_line (start -1.525 -2.95) (end -1.075 -2.95) (layer F.Fab) (width 0.15)) (fp_line (start -1.075 -2.95) (end -1.075 -2.725) (layer F.Fab) (width 0.15)) (fp_line (start -4.15 -0.65) (end -4.15 0.75) (layer F.SilkS) (width 0.15)) (fp_line (start -4.15 3.15) (end -4.15 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start -4.15 3.3) (end -3.85 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start -3.85 3.3) (end -3.85 3.75) (layer F.SilkS) (width 0.15)) (fp_line (start 3.85 3.75) (end 3.85 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start 3.85 3.3) (end 4.15 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start 4.15 3.3) (end 4.15 3.15) (layer F.SilkS) (width 0.15)) (fp_line (start 4.15 0.75) (end 4.15 -0.65) (layer F.SilkS) (width 0.15)) (fp_line (start -1.075 -2.825) (end -1.8 -2.825) (layer F.SilkS) (width 0.15)) (fp_line (start -1.8 -2.825) (end -1.8 -2.4) (layer F.SilkS) (width 0.15)) (fp_line (start -1.8 -2.4) (end -2.525 -2.4) (layer F.SilkS) (width 0.15)) (fp_line (start 1.8 -2.4) (end 2.525 -2.4) (layer F.SilkS) (width 0.15)) (fp_line (start -5.27 -3.34) (end -5.27 4.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.27 4.85) (end 5.28 4.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.28 4.85) (end 5.28 -3.34) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.28 -3.34) (end -5.27 -3.34) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 1.05 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user "PCB Edge" (at 0 3.75 270) (layer Dwgs.User) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd rect (at -1.3 -1.9 270) (size 0.45 1.3) (layers F.Cu F.Paste F.Mask) (net 13 "Net-(CONN_USB1-Pad1)")) (pad 2 smd rect (at -0.65 -1.9 270) (size 0.45 1.3) (layers F.Cu F.Paste F.Mask) (net 14 /D-)) (pad 3 smd rect (at 0 -1.9 270) (size 0.45 1.3) (layers F.Cu F.Paste F.Mask) (net 15 /D+)) (pad 4 smd rect (at 0.65 -1.9 270) (size 0.45 1.3) (layers F.Cu F.Paste F.Mask)) (pad 5 smd rect (at 1.3 -1.9 270) (size 0.45 1.3) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 6 thru_hole circle (at -3.725 -1.85 270) (size 2 2) (drill 1.4) (layers *.Cu *.Mask) (net 16 "Net-(CONN_USB1-Pad6)")) (pad 6 thru_hole circle (at 3.725 -1.85 270) (size 2 2) (drill 1.4) (layers *.Cu *.Mask) (net 16 "Net-(CONN_USB1-Pad6)")) (pad 6 thru_hole circle (at -3.875 1.95 270) (size 1.8 1.8) (drill 1.2) (layers *.Cu *.Mask) (net 16 "Net-(CONN_USB1-Pad6)")) (pad 6 thru_hole circle (at 3.875 1.95 270) (size 1.8 1.8) (drill 1.2) (layers *.Cu *.Mask) (net 16 "Net-(CONN_USB1-Pad6)")) (pad "" np_thru_hole circle (at -2.5 -0.8 270) (size 0.8 0.8) (drill 0.8) (layers *.Cu *.Mask)) (pad "" np_thru_hole circle (at 2.5 -0.8 270) (size 0.8 0.8) (drill 0.8) (layers *.Cu *.Mask)) (model ${KISYS3DMOD}/Connector_USB.3dshapes/USB_Micro-B_Wuerth_629105150521_CircularHoles.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module MountingHole:MountingHole_2.5mm (layer F.Cu) (tedit 5DBE008C) (tstamp 5DCBAB2B) (at 181.25 118.75) (descr "Mounting Hole 2.5mm, no annular") (tags "mounting hole 2.5mm no annular") (path /5C19B86B) (attr virtual) (fp_text reference H1 (at 0 -3.5) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.75 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.5 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 np_thru_hole circle (at 0 0) (size 2.5 2.5) (drill 2.5) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad (layer F.Cu) (tedit 5DBE009D) (tstamp 5DCBAB33) (at 136.5 74) (descr "Mounting Hole 2.7mm, M2.5, DIN965") (tags "mounting hole 2.7mm m2.5 din965") (path /5C19B6A7) (attr virtual) (fp_text reference H2 (at 0 -3.35) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole_Pad (at 0 3.35) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.35 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.6 0) (layer F.CrtYd) (width 0.05)) (pad 1 thru_hole circle (at 0 0) (size 4.7 4.7) (drill 2.7) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.5mm (layer F.Cu) (tedit 5DBE0092) (tstamp 5DCBAB3B) (at 181.25 74.25) (descr "Mounting Hole 2.5mm, no annular") (tags "mounting hole 2.5mm no annular") (path /5C19B97E) (attr virtual) (fp_text reference H3 (at 0 -3.5) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.5 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.75 0) (layer F.CrtYd) (width 0.05)) (pad 1 np_thru_hole circle (at 0 0) (size 2.5 2.5) (drill 2.5) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad (layer F.Cu) (tedit 5DBE00A1) (tstamp 5DCBAB43) (at 136.5 119) (descr "Mounting Hole 2.7mm, M2.5, DIN965") (tags "mounting hole 2.7mm m2.5 din965") (path /5C19B5BC) (attr virtual) (fp_text reference H4 (at 0 -3.35) (layer F.SilkS) hide (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole_Pad (at 0 3.35) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.6 0) (layer F.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.35 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole circle (at 0 0) (size 4.7 4.7) (drill 2.7) (layers *.Cu *.Mask)) ) (module Diode_SMD:D_0805_2012Metric_Castellated (layer F.Cu) (tedit 5B36C52B) (tstamp 5DCBAB56) (at 159.5 120) (descr "Diode SMD 0805 (2012 Metric), castellated end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "diode castellated") (path /5DE241F9) (attr smd) (fp_text reference HELLO_LED1 (at 0 -1.6) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value HELLO (at 0 1.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1 -0.6) (end -0.7 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.6) (end -1 -0.3) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.3) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.91) (end -1.885 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -1.885 -0.91) (end -1.885 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -1.885 0.91) (end 1 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -1.88 0.9) (end -1.88 -0.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 -0.9) (end 1.88 -0.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 -0.9) (end 1.88 0.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 0.9) (end -1.88 0.9) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9625 0) (size 1.325 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.192308) (net 1 GND)) (pad 2 smd roundrect (at 0.9625 0) (size 1.325 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.192308) (net 17 "Net-(HELLO_LED1-Pad2)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_0805_2012Metric_Castellated.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAB67) (at 159.25 118) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5DE2D4DB) (attr smd) (fp_text reference HELLO_R1 (at 0 -1.82) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 17 "Net-(HELLO_LED1-Pad2)")) (pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 18 /HELLO)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical (layer F.Cu) (tedit 59FED6E3) (tstamp 5DC6C214) (at 168.5 108) (descr "Through hole straight pin header, 2x05, 1.27mm pitch, double rows") (tags "Through hole pin header THT 2x05 1.27mm double row") (path /5DE6654F) (fp_text reference J1 (at 0.635 -1.695) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_02x05_Odd_Even (at 0.635 6.775) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.2175 -0.635) (end 2.34 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 2.34 -0.635) (end 2.34 5.715) (layer F.Fab) (width 0.1)) (fp_line (start 2.34 5.715) (end -1.07 5.715) (layer F.Fab) (width 0.1)) (fp_line (start -1.07 5.715) (end -1.07 0.2175) (layer F.Fab) (width 0.1)) (fp_line (start -1.07 0.2175) (end -0.2175 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.13 5.775) (end -0.30753 5.775) (layer F.SilkS) (width 0.12)) (fp_line (start 1.57753 5.775) (end 2.4 5.775) (layer F.SilkS) (width 0.12)) (fp_line (start 0.30753 5.775) (end 0.96247 5.775) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 0.76) (end -1.13 5.775) (layer F.SilkS) (width 0.12)) (fp_line (start 2.4 -0.695) (end 2.4 5.775) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 0.76) (end -0.563471 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 0.563471 0.76) (end 0.706529 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 0.706529) (end 0.76 0.563471) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 -0.563471) (end 0.76 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 -0.695) (end 0.96247 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start 1.57753 -0.695) (end 2.4 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 0) (end -1.13 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.13 -0.76) (end 0 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -1.15) (end -1.6 6.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.6 6.25) (end 2.85 6.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.85 6.25) (end 2.85 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.85 -1.15) (end -1.6 -1.15) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.635 2.54 -270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 11 /VDD)) (pad 2 thru_hole oval (at 1.27 0) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 19 /SWIO)) (pad 3 thru_hole oval (at 0 1.27) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 1 GND)) (pad 4 thru_hole oval (at 1.27 1.27) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 20 /SWCLK)) (pad 5 thru_hole oval (at 0 2.54) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 1 GND)) (pad 6 thru_hole oval (at 1.27 2.54) (size 1 1) (drill 0.65) (layers *.Cu *.Mask)) (pad 7 thru_hole oval (at 0 3.81) (size 1 1) (drill 0.65) (layers *.Cu *.Mask)) (pad 8 thru_hole oval (at 1.27 3.81) (size 1 1) (drill 0.65) (layers *.Cu *.Mask)) (pad 9 thru_hole oval (at 0 5.08) (size 1 1) (drill 0.65) (layers *.Cu *.Mask)) (pad 10 thru_hole oval (at 1.27 5.08) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 21 /RESET)) (model ${KISYS3DMOD}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_2x05_P1.27mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_THT:LED_D3.0mm (layer F.Cu) (tedit 587A3A7B) (tstamp 5DCBABF8) (at 163 103 180) (descr "LED, diameter 3.0mm, 2 pins") (tags "LED diameter 3.0mm 2 pins") (path /5C1465DD) (fp_text reference LED_B1 (at 1.27 -2.96 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED_B (at 1.27 2.96 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 1.27 0) (end -0.23 -1.16619) (angle 284.3) (layer F.Fab) (width 0.1)) (fp_arc (start 1.27 0) (end -0.29 -1.235516) (angle 108.8) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end -0.29 1.235516) (angle -108.8) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end 0.229039 -1.08) (angle 87.9) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end 0.229039 1.08) (angle -87.9) (layer F.SilkS) (width 0.12)) (fp_circle (center 1.27 0) (end 2.77 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.23 -1.16619) (end -0.23 1.16619) (layer F.Fab) (width 0.1)) (fp_line (start -0.29 -1.236) (end -0.29 -1.08) (layer F.SilkS) (width 0.12)) (fp_line (start -0.29 1.08) (end -0.29 1.236) (layer F.SilkS) (width 0.12)) (fp_line (start -1.15 -2.25) (end -1.15 2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.15 2.25) (end 3.7 2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.25) (end 3.7 -2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.25) (end -1.15 -2.25) (layer F.CrtYd) (width 0.05)) (pad 1 thru_hole rect (at 0 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 22 "Net-(LED_B1-Pad1)")) (pad 2 thru_hole circle (at 2.54 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 23 "Net-(LED_B1-Pad2)")) (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D3.0mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_THT:LED_D3.0mm (layer F.Cu) (tedit 587A3A7B) (tstamp 5DCBAC0B) (at 163 92.5 180) (descr "LED, diameter 3.0mm, 2 pins") (tags "LED diameter 3.0mm 2 pins") (path /5C146595) (fp_text reference LED_G1 (at 1.27 -2.96 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED_G (at 1.27 2.96 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 3.7 -2.25) (end -1.15 -2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.25) (end 3.7 -2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.15 2.25) (end 3.7 2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.15 -2.25) (end -1.15 2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.29 1.08) (end -0.29 1.236) (layer F.SilkS) (width 0.12)) (fp_line (start -0.29 -1.236) (end -0.29 -1.08) (layer F.SilkS) (width 0.12)) (fp_line (start -0.23 -1.16619) (end -0.23 1.16619) (layer F.Fab) (width 0.1)) (fp_circle (center 1.27 0) (end 2.77 0) (layer F.Fab) (width 0.1)) (fp_arc (start 1.27 0) (end 0.229039 1.08) (angle -87.9) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end 0.229039 -1.08) (angle 87.9) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end -0.29 1.235516) (angle -108.8) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end -0.29 -1.235516) (angle 108.8) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end -0.23 -1.16619) (angle 284.3) (layer F.Fab) (width 0.1)) (pad 2 thru_hole circle (at 2.54 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 24 "Net-(LED_G1-Pad2)")) (pad 1 thru_hole rect (at 0 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 25 "Net-(LED_G1-Pad1)")) (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D3.0mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0805_2012Metric_Castellated (layer F.Cu) (tedit 5B36C52C) (tstamp 5DCBAC1E) (at 128.35 105) (descr "LED SMD 0805 (2012 Metric), castellated end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "LED castellated") (path /5D9FC531) (attr smd) (fp_text reference LED_O1 (at 4.5 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED_O (at 0 1.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1 -0.6) (end -0.7 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.6) (end -1 -0.3) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.3) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.91) (end -1.885 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -1.885 -0.91) (end -1.885 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -1.885 0.91) (end 1 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -1.88 0.9) (end -1.88 -0.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 -0.9) (end 1.88 -0.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 -0.9) (end 1.88 0.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 0.9) (end -1.88 0.9) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9625 0) (size 1.325 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.192308) (net 5 "Net-(BAT_R2-Pad1)")) (pad 2 smd roundrect (at 0.9625 0) (size 1.325 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.192308) (net 2 /VBUS)) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0805_2012Metric_Castellated.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_THT:LED_D3.0mm (layer F.Cu) (tedit 587A3A7B) (tstamp 5DCBAC31) (at 163 85.5 180) (descr "LED, diameter 3.0mm, 2 pins") (tags "LED diameter 3.0mm 2 pins") (path /5C146308) (fp_text reference LED_R1 (at 1.27 -2.96 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED_R (at 1.27 2.96 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_arc (start 1.27 0) (end -0.23 -1.16619) (angle 284.3) (layer F.Fab) (width 0.1)) (fp_arc (start 1.27 0) (end -0.29 -1.235516) (angle 108.8) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end -0.29 1.235516) (angle -108.8) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end 0.229039 -1.08) (angle 87.9) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.27 0) (end 0.229039 1.08) (angle -87.9) (layer F.SilkS) (width 0.12)) (fp_circle (center 1.27 0) (end 2.77 0) (layer F.Fab) (width 0.1)) (fp_line (start -0.23 -1.16619) (end -0.23 1.16619) (layer F.Fab) (width 0.1)) (fp_line (start -0.29 -1.236) (end -0.29 -1.08) (layer F.SilkS) (width 0.12)) (fp_line (start -0.29 1.08) (end -0.29 1.236) (layer F.SilkS) (width 0.12)) (fp_line (start -1.15 -2.25) (end -1.15 2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.15 2.25) (end 3.7 2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.25) (end 3.7 -2.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.25) (end -1.15 -2.25) (layer F.CrtYd) (width 0.05)) (pad 1 thru_hole rect (at 0 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 26 "Net-(LED_R1-Pad1)")) (pad 2 thru_hole circle (at 2.54 0 180) (size 1.8 1.8) (drill 0.9) (layers *.Cu *.Mask) (net 27 "Net-(LED_R1-Pad2)")) (model ${KISYS3DMOD}/LED_THT.3dshapes/LED_D3.0mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B4B45C8) (tstamp 5DCBAC44) (at 141 96.25 270) (descr "Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags "diode handsolder") (path /5DCB6D37) (attr smd) (fp_text reference LED_W1 (at 0 2 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED_W (at 0 1.82 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.46 1.135) (end 1.6 1.135) (layer F.SilkS) (width 0.12)) (fp_line (start -2.46 -1.135) (end -2.46 1.135) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 -1.135) (end -2.46 -1.135) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.4) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.2 -0.8) (end -1.6 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.2 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4875 0 270) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439) (net 28 "Net-(LED_W1-Pad2)")) (pad 1 smd roundrect (at -1.4875 0 270) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439) (net 29 "Net-(LED_W1-Pad1)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5DBE0077) (tstamp 5DCBAC6A) (at 177.75 110 225) (descr "Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags "diode handsolder") (path /5C41558D) (attr smd) (fp_text reference LED_W3 (at 0 -2.12132 225) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED_W (at 0 1.82 225) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.6 -0.8) (end -1.2 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.2 -0.8) (end -1.6 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.4) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -1.135) (end -2.46 -1.135) (layer F.SilkS) (width 0.12)) (fp_line (start -2.46 -1.135) (end -2.46 1.135) (layer F.SilkS) (width 0.12)) (fp_line (start -2.46 1.135) (end 1.6 1.135) (layer F.SilkS) (width 0.12)) (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 225) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4875 0 225) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439) (net 29 "Net-(LED_W1-Pad1)")) (pad 2 smd roundrect (at 1.4875 0 225) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439) (net 31 "Net-(LED_W3-Pad2)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_THT:CP_Radial_D6.3mm_P2.50mm (layer F.Cu) (tedit 5AE50EF0) (tstamp 5DCBAD0F) (at 151.75 104 180) (descr "CP, Radial series, Radial, pin pitch=2.50mm, , diameter=6.3mm, Electrolytic Capacitor") (tags "CP Radial series Radial pin pitch 2.50mm diameter 6.3mm Electrolytic Capacitor") (path /5C1A207B) (fp_text reference PWR_C2 (at 1.25 -4.4 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 330uF (at 1.25 4.4 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 1.25 0) (end 4.4 0) (layer F.Fab) (width 0.1)) (fp_circle (center 1.25 0) (end 4.52 0) (layer F.SilkS) (width 0.12)) (fp_circle (center 1.25 0) (end 4.65 0) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.443972 -1.3735) (end -0.813972 -1.3735) (layer F.Fab) (width 0.1)) (fp_line (start -1.128972 -1.6885) (end -1.128972 -1.0585) (layer F.Fab) (width 0.1)) (fp_line (start 1.25 -3.23) (end 1.25 3.23) (layer F.SilkS) (width 0.12)) (fp_line (start 1.29 -3.23) (end 1.29 3.23) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 -3.23) (end 1.33 3.23) (layer F.SilkS) (width 0.12)) (fp_line (start 1.37 -3.228) (end 1.37 3.228) (layer F.SilkS) (width 0.12)) (fp_line (start 1.41 -3.227) (end 1.41 3.227) (layer F.SilkS) (width 0.12)) (fp_line (start 1.45 -3.224) (end 1.45 3.224) (layer F.SilkS) (width 0.12)) (fp_line (start 1.49 -3.222) (end 1.49 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.49 1.04) (end 1.49 3.222) (layer F.SilkS) (width 0.12)) (fp_line (start 1.53 -3.218) (end 1.53 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.53 1.04) (end 1.53 3.218) (layer F.SilkS) (width 0.12)) (fp_line (start 1.57 -3.215) (end 1.57 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.57 1.04) (end 1.57 3.215) (layer F.SilkS) (width 0.12)) (fp_line (start 1.61 -3.211) (end 1.61 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.61 1.04) (end 1.61 3.211) (layer F.SilkS) (width 0.12)) (fp_line (start 1.65 -3.206) (end 1.65 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.65 1.04) (end 1.65 3.206) (layer F.SilkS) (width 0.12)) (fp_line (start 1.69 -3.201) (end 1.69 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.69 1.04) (end 1.69 3.201) (layer F.SilkS) (width 0.12)) (fp_line (start 1.73 -3.195) (end 1.73 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.73 1.04) (end 1.73 3.195) (layer F.SilkS) (width 0.12)) (fp_line (start 1.77 -3.189) (end 1.77 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.77 1.04) (end 1.77 3.189) (layer F.SilkS) (width 0.12)) (fp_line (start 1.81 -3.182) (end 1.81 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.81 1.04) (end 1.81 3.182) (layer F.SilkS) (width 0.12)) (fp_line (start 1.85 -3.175) (end 1.85 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.85 1.04) (end 1.85 3.175) (layer F.SilkS) (width 0.12)) (fp_line (start 1.89 -3.167) (end 1.89 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.89 1.04) (end 1.89 3.167) (layer F.SilkS) (width 0.12)) (fp_line (start 1.93 -3.159) (end 1.93 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.93 1.04) (end 1.93 3.159) (layer F.SilkS) (width 0.12)) (fp_line (start 1.971 -3.15) (end 1.971 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 1.971 1.04) (end 1.971 3.15) (layer F.SilkS) (width 0.12)) (fp_line (start 2.011 -3.141) (end 2.011 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.011 1.04) (end 2.011 3.141) (layer F.SilkS) (width 0.12)) (fp_line (start 2.051 -3.131) (end 2.051 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.051 1.04) (end 2.051 3.131) (layer F.SilkS) (width 0.12)) (fp_line (start 2.091 -3.121) (end 2.091 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.091 1.04) (end 2.091 3.121) (layer F.SilkS) (width 0.12)) (fp_line (start 2.131 -3.11) (end 2.131 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.131 1.04) (end 2.131 3.11) (layer F.SilkS) (width 0.12)) (fp_line (start 2.171 -3.098) (end 2.171 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.171 1.04) (end 2.171 3.098) (layer F.SilkS) (width 0.12)) (fp_line (start 2.211 -3.086) (end 2.211 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.211 1.04) (end 2.211 3.086) (layer F.SilkS) (width 0.12)) (fp_line (start 2.251 -3.074) (end 2.251 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.251 1.04) (end 2.251 3.074) (layer F.SilkS) (width 0.12)) (fp_line (start 2.291 -3.061) (end 2.291 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.291 1.04) (end 2.291 3.061) (layer F.SilkS) (width 0.12)) (fp_line (start 2.331 -3.047) (end 2.331 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.331 1.04) (end 2.331 3.047) (layer F.SilkS) (width 0.12)) (fp_line (start 2.371 -3.033) (end 2.371 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.371 1.04) (end 2.371 3.033) (layer F.SilkS) (width 0.12)) (fp_line (start 2.411 -3.018) (end 2.411 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.411 1.04) (end 2.411 3.018) (layer F.SilkS) (width 0.12)) (fp_line (start 2.451 -3.002) (end 2.451 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.451 1.04) (end 2.451 3.002) (layer F.SilkS) (width 0.12)) (fp_line (start 2.491 -2.986) (end 2.491 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.491 1.04) (end 2.491 2.986) (layer F.SilkS) (width 0.12)) (fp_line (start 2.531 -2.97) (end 2.531 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.531 1.04) (end 2.531 2.97) (layer F.SilkS) (width 0.12)) (fp_line (start 2.571 -2.952) (end 2.571 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.571 1.04) (end 2.571 2.952) (layer F.SilkS) (width 0.12)) (fp_line (start 2.611 -2.934) (end 2.611 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.611 1.04) (end 2.611 2.934) (layer F.SilkS) (width 0.12)) (fp_line (start 2.651 -2.916) (end 2.651 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.651 1.04) (end 2.651 2.916) (layer F.SilkS) (width 0.12)) (fp_line (start 2.691 -2.896) (end 2.691 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.691 1.04) (end 2.691 2.896) (layer F.SilkS) (width 0.12)) (fp_line (start 2.731 -2.876) (end 2.731 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.731 1.04) (end 2.731 2.876) (layer F.SilkS) (width 0.12)) (fp_line (start 2.771 -2.856) (end 2.771 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.771 1.04) (end 2.771 2.856) (layer F.SilkS) (width 0.12)) (fp_line (start 2.811 -2.834) (end 2.811 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.811 1.04) (end 2.811 2.834) (layer F.SilkS) (width 0.12)) (fp_line (start 2.851 -2.812) (end 2.851 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.851 1.04) (end 2.851 2.812) (layer F.SilkS) (width 0.12)) (fp_line (start 2.891 -2.79) (end 2.891 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.891 1.04) (end 2.891 2.79) (layer F.SilkS) (width 0.12)) (fp_line (start 2.931 -2.766) (end 2.931 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.931 1.04) (end 2.931 2.766) (layer F.SilkS) (width 0.12)) (fp_line (start 2.971 -2.742) (end 2.971 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 2.971 1.04) (end 2.971 2.742) (layer F.SilkS) (width 0.12)) (fp_line (start 3.011 -2.716) (end 3.011 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.011 1.04) (end 3.011 2.716) (layer F.SilkS) (width 0.12)) (fp_line (start 3.051 -2.69) (end 3.051 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.051 1.04) (end 3.051 2.69) (layer F.SilkS) (width 0.12)) (fp_line (start 3.091 -2.664) (end 3.091 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.091 1.04) (end 3.091 2.664) (layer F.SilkS) (width 0.12)) (fp_line (start 3.131 -2.636) (end 3.131 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.131 1.04) (end 3.131 2.636) (layer F.SilkS) (width 0.12)) (fp_line (start 3.171 -2.607) (end 3.171 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.171 1.04) (end 3.171 2.607) (layer F.SilkS) (width 0.12)) (fp_line (start 3.211 -2.578) (end 3.211 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.211 1.04) (end 3.211 2.578) (layer F.SilkS) (width 0.12)) (fp_line (start 3.251 -2.548) (end 3.251 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.251 1.04) (end 3.251 2.548) (layer F.SilkS) (width 0.12)) (fp_line (start 3.291 -2.516) (end 3.291 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.291 1.04) (end 3.291 2.516) (layer F.SilkS) (width 0.12)) (fp_line (start 3.331 -2.484) (end 3.331 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.331 1.04) (end 3.331 2.484) (layer F.SilkS) (width 0.12)) (fp_line (start 3.371 -2.45) (end 3.371 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.371 1.04) (end 3.371 2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.411 -2.416) (end 3.411 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.411 1.04) (end 3.411 2.416) (layer F.SilkS) (width 0.12)) (fp_line (start 3.451 -2.38) (end 3.451 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.451 1.04) (end 3.451 2.38) (layer F.SilkS) (width 0.12)) (fp_line (start 3.491 -2.343) (end 3.491 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.491 1.04) (end 3.491 2.343) (layer F.SilkS) (width 0.12)) (fp_line (start 3.531 -2.305) (end 3.531 -1.04) (layer F.SilkS) (width 0.12)) (fp_line (start 3.531 1.04) (end 3.531 2.305) (layer F.SilkS) (width 0.12)) (fp_line (start 3.571 -2.265) (end 3.571 2.265) (layer F.SilkS) (width 0.12)) (fp_line (start 3.611 -2.224) (end 3.611 2.224) (layer F.SilkS) (width 0.12)) (fp_line (start 3.651 -2.182) (end 3.651 2.182) (layer F.SilkS) (width 0.12)) (fp_line (start 3.691 -2.137) (end 3.691 2.137) (layer F.SilkS) (width 0.12)) (fp_line (start 3.731 -2.092) (end 3.731 2.092) (layer F.SilkS) (width 0.12)) (fp_line (start 3.771 -2.044) (end 3.771 2.044) (layer F.SilkS) (width 0.12)) (fp_line (start 3.811 -1.995) (end 3.811 1.995) (layer F.SilkS) (width 0.12)) (fp_line (start 3.851 -1.944) (end 3.851 1.944) (layer F.SilkS) (width 0.12)) (fp_line (start 3.891 -1.89) (end 3.891 1.89) (layer F.SilkS) (width 0.12)) (fp_line (start 3.931 -1.834) (end 3.931 1.834) (layer F.SilkS) (width 0.12)) (fp_line (start 3.971 -1.776) (end 3.971 1.776) (layer F.SilkS) (width 0.12)) (fp_line (start 4.011 -1.714) (end 4.011 1.714) (layer F.SilkS) (width 0.12)) (fp_line (start 4.051 -1.65) (end 4.051 1.65) (layer F.SilkS) (width 0.12)) (fp_line (start 4.091 -1.581) (end 4.091 1.581) (layer F.SilkS) (width 0.12)) (fp_line (start 4.131 -1.509) (end 4.131 1.509) (layer F.SilkS) (width 0.12)) (fp_line (start 4.171 -1.432) (end 4.171 1.432) (layer F.SilkS) (width 0.12)) (fp_line (start 4.211 -1.35) (end 4.211 1.35) (layer F.SilkS) (width 0.12)) (fp_line (start 4.251 -1.262) (end 4.251 1.262) (layer F.SilkS) (width 0.12)) (fp_line (start 4.291 -1.165) (end 4.291 1.165) (layer F.SilkS) (width 0.12)) (fp_line (start 4.331 -1.059) (end 4.331 1.059) (layer F.SilkS) (width 0.12)) (fp_line (start 4.371 -0.94) (end 4.371 0.94) (layer F.SilkS) (width 0.12)) (fp_line (start 4.411 -0.802) (end 4.411 0.802) (layer F.SilkS) (width 0.12)) (fp_line (start 4.451 -0.633) (end 4.451 0.633) (layer F.SilkS) (width 0.12)) (fp_line (start 4.491 -0.402) (end 4.491 0.402) (layer F.SilkS) (width 0.12)) (fp_line (start -2.250241 -1.839) (end -1.620241 -1.839) (layer F.SilkS) (width 0.12)) (fp_line (start -1.935241 -2.154) (end -1.935241 -1.524) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 1.25 0 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0 180) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 32 /VCC)) (pad 2 thru_hole circle (at 2.5 0 180) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_THT.3dshapes/CP_Radial_D6.3mm_P2.50mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Diode_SMD:D_SOD-123F (layer F.Cu) (tedit 587F7769) (tstamp 5DCBAD95) (at 143.5 107.5 180) (descr D_SOD-123F) (tags D_SOD-123F) (path /5D828458) (attr smd) (fp_text reference PWR_D1 (at -0.127 2 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value D_Schottky (at 0 2.1 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at -0.127 -1.905 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.2 -1) (end -2.2 1) (layer F.SilkS) (width 0.12)) (fp_line (start 0.25 0) (end 0.75 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.25 0.4) (end -0.35 0) (layer F.Fab) (width 0.1)) (fp_line (start 0.25 -0.4) (end 0.25 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.35 0) (end 0.25 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.35 0) (end -0.35 0.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.35 0) (end -0.35 -0.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.75 0) (end -0.35 0) (layer F.Fab) (width 0.1)) (fp_line (start -1.4 0.9) (end -1.4 -0.9) (layer F.Fab) (width 0.1)) (fp_line (start 1.4 0.9) (end -1.4 0.9) (layer F.Fab) (width 0.1)) (fp_line (start 1.4 -0.9) (end 1.4 0.9) (layer F.Fab) (width 0.1)) (fp_line (start -1.4 -0.9) (end 1.4 -0.9) (layer F.Fab) (width 0.1)) (fp_line (start -2.2 -1.15) (end 2.2 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.2 -1.15) (end 2.2 1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.2 1.15) (end -2.2 1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.2 -1.15) (end -2.2 1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.2 1) (end 1.65 1) (layer F.SilkS) (width 0.12)) (fp_line (start -2.2 -1) (end 1.65 -1) (layer F.SilkS) (width 0.12)) (pad 1 smd rect (at -1.4 0 180) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask) (net 2 /VBUS)) (pad 2 smd rect (at 1.4 0 180) (size 1.1 1.1) (layers F.Cu F.Paste F.Mask) (net 13 "Net-(CONN_USB1-Pad1)")) (model ${KISYS3DMOD}/Diode_SMD.3dshapes/D_SOD-123F.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-553 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DCD8BE7) (at 142.25 110.85) (descr SOT553) (tags SOT-553) (path /5D828451) (attr smd) (fp_text reference PWR_U1 (at 0 4 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value TPD3E001DRLR (at 0 1.75) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.0625))) ) (fp_line (start -0.65 -0.5) (end -0.3 -0.85) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 0.9) (end -0.65 0.9) (layer F.SilkS) (width 0.12)) (fp_line (start -0.9 -0.9) (end 0.65 -0.9) (layer F.SilkS) (width 0.12)) (fp_line (start -0.65 -0.5) (end -0.65 0.85) (layer F.Fab) (width 0.1)) (fp_line (start -0.65 0.85) (end 0.65 0.85) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 0.85) (end 0.65 -0.85) (layer F.Fab) (width 0.1)) (fp_line (start 0.65 -0.85) (end -0.3 -0.85) (layer F.Fab) (width 0.1)) (fp_line (start -1.18 -1.1) (end 1.18 -1.1) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.18 -1.1) (end -1.18 1.1) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.18 1.1) (end 1.18 -1.1) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.18 1.1) (end -1.18 1.1) (layer F.CrtYd) (width 0.05)) (pad 1 smd rect (at -0.7 -0.5) (size 0.45 0.3) (layers F.Cu F.Paste F.Mask) (net 14 /D-)) (pad 3 smd rect (at -0.7 0.5) (size 0.45 0.3) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 5 smd rect (at 0.7 -0.5) (size 0.45 0.3) (layers F.Cu F.Paste F.Mask) (net 13 "Net-(CONN_USB1-Pad1)")) (pad 2 smd rect (at -0.7 0) (size 0.45 0.3) (layers F.Cu F.Paste F.Mask) (net 15 /D+)) (pad 4 smd rect (at 0.7 0.5) (size 0.45 0.3) (layers F.Cu F.Paste F.Mask)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-553.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23-5 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DCBADE5) (at 165.8 119.15) (descr "5-pin SOT23 package") (tags SOT-23-5) (path /5D828381) (attr smd) (fp_text reference PWR_U2 (at 0 2.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AP2112K-3.3 (at 0 2.9) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0.9 -1.55) (end 0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 1.55) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 -0.9) (end -0.9 1.55) (layer F.Fab) (width 0.1)) (fp_line (start 0.9 -1.55) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -0.9 -0.9) (end -0.25 -1.55) (layer F.Fab) (width 0.1)) (fp_line (start -1.9 1.8) (end -1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 1.8) (end -1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.9 -1.8) (end 1.9 1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.9 -1.8) (end 1.9 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.9 -1.61) (end -1.55 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -0.9 1.61) (end 0.9 1.61) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 5 smd rect (at 1.1 -0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 11 /VDD)) (pad 4 smd rect (at 1.1 0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask)) (pad 3 smd rect (at -1.1 0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 35 "Net-(PWR_R1-Pad1)")) (pad 2 smd rect (at -1.1 0) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 1 smd rect (at -1.1 -0.95) (size 1.06 0.65) (layers F.Cu F.Paste F.Mask) (net 32 /VCC)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23-5.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-223-3_TabPin2 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DCD9ED9) (at 145.75 85) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (path /5D8FDCBB) (attr smd) (fp_text reference PWR_U3 (at 0 -4.5) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LD1117S33TR_SOT223 (at 0 4.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -2.35) (end -0.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 -2.35) (end -1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -0.85 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (pad 2 smd rect (at 3.15 0) (size 2 3.8) (layers F.Cu F.Paste F.Mask) (net 33 /V_LED)) (pad 2 smd rect (at -3.15 0) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 33 /V_LED)) (pad 3 smd rect (at -3.15 2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 32 /VCC)) (pad 1 smd rect (at -3.15 -2.3) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SO-8_3.9x4.9mm_P1.27mm locked (layer F.Cu) (tedit 5DBCE361) (tstamp 5DCBAE15) (at 168 80) (descr "SO, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SO SO") (path /5D8A989A) (attr smd) (fp_text reference Q1 (at 0 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Q_DUAL_NMOS (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (pad 1 smd roundrect (at -2.575 -1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 36 "Net-(Q1-Pad1)")) (pad 2 smd roundrect (at -2.575 -0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -2.575 0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 "Net-(Q1-Pad3)")) (pad 4 smd roundrect (at -2.575 1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 26 "Net-(LED_R1-Pad1)")) (pad 5 smd roundrect (at 2.575 1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 6 smd roundrect (at 2.575 0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 "Net-(LED_W1-Pad1)")) (pad 7 smd roundrect (at 2.575 -0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 8 smd roundrect (at 2.575 -1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (model ${KISYS3DMOD}/Package_SO.3dshapes/SO-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_SO:SO-8_3.9x4.9mm_P1.27mm locked (layer F.Cu) (tedit 5DBCC409) (tstamp 5DCBAE2F) (at 168 90.5) (descr "SO, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "SO SO") (path /5D8A9C11) (attr smd) (fp_text reference Q2 (at 0 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Q_DUAL_NMOS (at 0 3.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.98 0.98) (thickness 0.15))) ) (fp_line (start 3.7 -2.7) (end -3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.7 2.7) (end 3.7 -2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 2.7) (end 3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.7 -2.7) (end -3.7 2.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.95 -1.475) (end -0.975 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 2.45) (end -1.95 -1.475) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 2.45) (end -1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -2.45) (end 1.95 2.45) (layer F.Fab) (width 0.1)) (fp_line (start -0.975 -2.45) (end 1.95 -2.45) (layer F.Fab) (width 0.1)) (fp_line (start 0 -2.56) (end -3.45 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -2.56) (end 1.95 -2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end -1.95 2.56) (layer F.SilkS) (width 0.12)) (fp_line (start 0 2.56) (end 1.95 2.56) (layer F.SilkS) (width 0.12)) (pad 8 smd roundrect (at 2.575 -1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 7 smd roundrect (at 2.575 -0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)) (pad 6 smd roundrect (at 2.575 0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 48 "Net-(J2-Pad1)")) (pad 5 smd roundrect (at 2.575 1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 4 smd roundrect (at -2.575 1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 25 "Net-(LED_G1-Pad1)")) (pad 3 smd roundrect (at -2.575 0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 38 "Net-(Q2-Pad3)")) (pad 2 smd roundrect (at -2.575 -0.635) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -2.575 -1.905) (size 1.75 0.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 "Net-(Q2-Pad1)")) (model ${KISYS3DMOD}/Package_SO.3dshapes/SO-8_3.9x4.9mm_P1.27mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAE8D) (at 158 103.05 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C146063) (attr smd) (fp_text reference RB1 (at 0 -2 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 470 (at 0 1.82 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 42 /LED_B)) (pad 1 smd roundrect (at -1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 41 "Net-(Q3-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DCBAE9E) (at 161.85 106.5) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C1463AA) (attr smd) (fp_text reference RB2 (at -3.75 0) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 6.8 (at 0 -1.82) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (fp_line (start 2.28 -1.12) (end -2.28 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end 2.28 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end 2.28 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end -2.28 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2) (net 23 "Net-(LED_B1-Pad2)")) (pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAEAF) (at 158 92.5 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C146028) (attr smd) (fp_text reference RG1 (at 0 -2 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 470 (at 0 1.82 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 38 "Net-(Q2-Pad3)")) (pad 2 smd roundrect (at 1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 43 /LED_G)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DCBAEC0) (at 161.75 96) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C14654A) (attr smd) (fp_text reference RG2 (at 0 2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10 (at 0 -1.82) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.28 -1.12) (end -2.28 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end 2.28 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end 2.28 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end -2.28 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2) (net 24 "Net-(LED_G1-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAED1) (at 159 80.75 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C145FE8) (attr smd) (fp_text reference RR1 (at -3.75 0 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 470 (at 0 1.82 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 44 /LED_R)) (pad 1 smd roundrect (at -1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 37 "Net-(Q1-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer B.Cu) (tedit 5B301BBD) (tstamp 5DCBAEE2) (at 158 85.5 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C14635A) (attr smd) (fp_text reference RR2 (at -3.75 0 270) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value 10 (at 0 -1.82 270) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -1.6 -0.8) (end -1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end 1.6 0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end 1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end -1.6 -0.8) (layer B.Fab) (width 0.1)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer B.SilkS) (width 0.12)) (fp_line (start -2.28 -1.12) (end -2.28 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end 2.28 1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end 2.28 -1.12) (layer B.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end -2.28 -1.12) (layer B.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer B.Fab) (effects (font (size 0.8 0.8) (thickness 0.12)) (justify mirror)) ) (pad 1 smd roundrect (at -1.4 0 270) (size 1.25 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (pad 2 smd roundrect (at 1.4 0 270) (size 1.25 1.75) (layers B.Cu B.Paste B.Mask) (roundrect_rratio 0.2) (net 27 "Net-(LED_R1-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAEF3) (at 161.75 78.25 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C13D48E) (attr smd) (fp_text reference RW1 (at 0 1.75 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 470 (at 0 1.82 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 45 /LED_W1)) (pad 1 smd roundrect (at -1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 36 "Net-(Q1-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAF04) (at 161.75 89 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5D8DBAE1) (attr smd) (fp_text reference RW2 (at 0 1.75 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 470 (at 0 1.82 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 39 "Net-(Q2-Pad1)")) (pad 2 smd roundrect (at 1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 46 /LED_W2)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5DBDB4C7) (tstamp 5DCBAF15) (at 161.75 99.5 180) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5D895CF9) (attr smd) (fp_text reference RW3 (at 0 1.75 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 470 (at 0 1.82 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 40 "Net-(Q3-Pad1)")) (pad 2 smd roundrect (at 1.4 0 180) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 47 /LED_W3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAF26) (at 143.5 96.25 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5DCB6E5D) (attr smd) (fp_text reference RW1-1 (at 0 -1.82 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (pad 2 smd roundrect (at 1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 28 "Net-(LED_W1-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAF37) (at 176 84.75 315) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C13B1B1) (attr smd) (fp_text reference RW1-2 (at 0 1.767767 315) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82 315) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 315) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.399999 0 315) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (pad 2 smd roundrect (at 1.399999 0 315) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 30 "Net-(LED_W2-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAF48) (at 176 108.25 225) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5C142AF5) (attr smd) (fp_text reference RW1-3 (at 0 -1.75 225) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82 225) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 225) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.399999 0 225) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (pad 2 smd roundrect (at 1.399999 0 225) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 31 "Net-(LED_W3-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAF6A) (at 177.75 88.75) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5D895D0A) (attr smd) (fp_text reference RW2-2 (at 0 -1.82) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 50 "Net-(J2-Pad4)")) (pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBF1DE) (at 180.25 94 270) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5DBD207A) (attr smd) (fp_text reference RW2-3 (at -0.5 -2 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (pad 2 smd roundrect (at 1.4 0 270) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 51 "Net-(J2-Pad6)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAF8C) (at 180.25 98.75 90) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5DBD20F1) (attr smd) (fp_text reference RW3-1 (at -0.25 2 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 53 "Net-(J2-Pad8)")) (pad 1 smd roundrect (at -1.4 0 90) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAF9D) (at 177.75 104.25) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5DBD2168) (attr smd) (fp_text reference RW3-2 (at -5 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 54 "Net-(J2-Pad10)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_1206_3216Metric (layer F.Cu) (tedit 5B301BBD) (tstamp 5DCBAFAE) (at 176 102) (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5DBD21DF) (attr smd) (fp_text reference RW3-3 (at 5 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 6.8 (at 0 1.82) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (fp_line (start 2.28 1.12) (end -2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.28 -1.12) (end 2.28 1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 -1.12) (end 2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.28 1.12) (end -2.28 -1.12) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12)) (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12)) (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 55 "Net-(J2-Pad12)")) (pad 1 smd roundrect (at -1.4 0) (size 1.25 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.2) (net 33 /V_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_QFP:TQFP-32_7x7mm_P0.8mm (layer F.Cu) (tedit 5DBDB55F) (tstamp 5DBE3A8D) (at 155.968919 111.055214 270) (descr "32-Lead Plastic Thin Quad Flatpack (PT) - 7x7x1.0 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf)") (tags "QFP 0.8") (path /5DD42904) (attr smd) (fp_text reference U1 (at 0 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ATSAML21E16B-AUT (at 0 6.05 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.5 -3.5) (end 3.5 -3.5) (layer F.Fab) (width 0.15)) (fp_line (start 3.5 -3.5) (end 3.5 3.5) (layer F.Fab) (width 0.15)) (fp_line (start 3.5 3.5) (end -3.5 3.5) (layer F.Fab) (width 0.15)) (fp_line (start -3.5 3.5) (end -3.5 -2.5) (layer F.Fab) (width 0.15)) (fp_line (start -3.5 -2.5) (end -2.5 -3.5) (layer F.Fab) (width 0.15)) (fp_line (start -5.3 -5.3) (end -5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.3 -5.3) (end 5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.3 -5.3) (end 5.3 -5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.3 5.3) (end 5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.625 -3.625) (end -3.625 -3.4) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 -3.625) (end 3.625 -3.3) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 3.625) (end 3.625 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 3.625) (end -3.625 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 -3.625) (end -3.3 -3.625) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 3.625) (end -3.3 3.625) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 3.625) (end 3.3 3.625) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 -3.625) (end 3.3 -3.625) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 -3.4) (end -5.05 -3.4) (layer F.SilkS) (width 0.15)) (pad 1 smd rect (at -4.25 -2.8 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 2 smd rect (at -4.25 -2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 3 smd rect (at -4.25 -1.2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 42 /LED_B)) (pad 4 smd rect (at -4.25 -0.4 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 47 /LED_W3)) (pad 5 smd rect (at -4.25 0.4 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 43 /LED_G)) (pad 6 smd rect (at -4.25 1.2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 46 /LED_W2)) (pad 7 smd rect (at -4.25 2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 44 /LED_R)) (pad 8 smd rect (at -4.25 2.8 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 45 /LED_W1)) (pad 9 smd rect (at -2.8 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 11 /VDD)) (pad 10 smd rect (at -2 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 11 smd rect (at -1.2 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 56 /IN1)) (pad 12 smd rect (at -0.4 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 57 /IN2)) (pad 13 smd rect (at 0.4 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 58 /IN3)) (pad 14 smd rect (at 1.2 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 15 smd rect (at 2 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 16 smd rect (at 2.8 4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 17 smd rect (at 4.25 2.8 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 8 /SDA)) (pad 18 smd rect (at 4.25 2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 7 /SCL)) (pad 19 smd rect (at 4.25 1.2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 20 smd rect (at 4.25 0.4 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 21 smd rect (at 4.25 -0.4 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 18 /HELLO)) (pad 22 smd rect (at 4.25 -1.2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 9 /PWR_CC)) (pad 23 smd rect (at 4.25 -2 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 14 /D-)) (pad 24 smd rect (at 4.25 -2.8 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 15 /D+)) (pad 25 smd rect (at 2.8 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 26 smd rect (at 2 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 21 /RESET)) (pad 27 smd rect (at 1.2 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 12 "Net-(C2-Pad2)")) (pad 28 smd rect (at 0.4 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 29 smd rect (at -0.4 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask)) (pad 30 smd rect (at -1.2 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 11 /VDD)) (pad 31 smd rect (at -2 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 20 /SWCLK)) (pad 32 smd rect (at -2.8 -4.25) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 19 /SWIO)) (model ${KISYS3DMOD}/Package_QFP.3dshapes/TQFP-32_7x7mm_P0.8mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Vertical (layer F.Cu) (tedit 5A19A421) (tstamp 5DCD578A) (at 124.195001 116.425001) (descr "Through hole straight socket strip, 2x03, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated") (tags "Through hole socket strip THT 2x03 1.27mm double row") (path /5DC7F548) (fp_text reference IN_J1 (at -0.635 -2.135) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_02x03_Odd_Even (at -0.635 4.675) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.16 -0.635) (end 0.1275 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 0.1275 -0.635) (end 0.89 0.1275) (layer F.Fab) (width 0.1)) (fp_line (start 0.89 0.1275) (end 0.89 3.175) (layer F.Fab) (width 0.1)) (fp_line (start 0.89 3.175) (end -2.16 3.175) (layer F.Fab) (width 0.1)) (fp_line (start -2.16 3.175) (end -2.16 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -2.22 -0.695) (end -1.57753 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start -0.96247 -0.695) (end -0.76 -0.695) (layer F.SilkS) (width 0.12)) (fp_line (start -2.22 -0.695) (end -2.22 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start 0.30753 3.235) (end 0.95 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start -2.22 3.235) (end -1.57753 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start -0.96247 3.235) (end -0.30753 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start 0.95 0.635) (end 0.95 3.235) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 0.635) (end 0.95 0.635) (layer F.SilkS) (width 0.12)) (fp_line (start 0.95 -0.76) (end 0.95 0) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -0.76) (end 0.95 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -2.67 -1.15) (end 1.38 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.38 -1.15) (end 1.38 3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.38 3.7) (end -2.67 3.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.67 3.7) (end -2.67 -1.15) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at -0.635 1.27 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0) (size 1 1) (drill 0.7) (layers *.Cu *.Mask) (net 59 "Net-(IN_J1-Pad1)")) (pad 2 thru_hole oval (at -1.27 0) (size 1 1) (drill 0.7) (layers *.Cu *.Mask) (net 1 GND)) (pad 3 thru_hole oval (at 0 1.27) (size 1 1) (drill 0.7) (layers *.Cu *.Mask) (net 60 "Net-(IN_J1-Pad3)")) (pad 4 thru_hole oval (at -1.27 1.27) (size 1 1) (drill 0.7) (layers *.Cu *.Mask) (net 1 GND)) (pad 5 thru_hole oval (at 0 2.54) (size 1 1) (drill 0.7) (layers *.Cu *.Mask) (net 61 "Net-(IN_J1-Pad5)")) (pad 6 thru_hole oval (at -1.27 2.54) (size 1 1) (drill 0.7) (layers *.Cu *.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Connector_PinSocket_1.27mm.3dshapes/PinSocket_2x03_P1.27mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module MountingHole:MountingHole_2.1mm (layer B.Cu) (tedit 5B924765) (tstamp 5DCD59BA) (at 136.5 92) (descr "Mounting Hole 2.1mm, no annular") (tags "mounting hole 2.1mm no annular") (attr virtual) (fp_text reference REF** (at 0 3.2) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value MountingHole_2.1mm (at 0 -3.2) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_circle (center 0 0) (end 2.35 0) (layer B.CrtYd) (width 0.05)) (fp_circle (center 0 0) (end 2.1 0) (layer Cmts.User) (width 0.15)) (fp_text user %R (at 0.3 0) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (pad "" np_thru_hole circle (at 0 0) (size 2.1 2.1) (drill 2.1) (layers *.Cu *.Mask)) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD042DA) (at 129.25 110 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D828444) (attr smd) (fp_text reference BAT_C1 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7u (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 /VBUS)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD042EA) (at 123.25 110 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D8283DF) (attr smd) (fp_text reference BAT_C2 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7u (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 /VBAT)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD042FA) (at 145.25 104.25 180) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DE1BDF0) (attr smd) (fp_text reference BAT_C3 (at 0 -1.65 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1u (at 0 1.65 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 /VBAT)) (pad 2 smd roundrect (at 0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0430A) (at 128.4 107) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5D8283D1) (attr smd) (fp_text reference BAT_R1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 5k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 "Net-(BAT_R1-Pad1)")) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0431A) (at 125.15 106.05 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5D8283CA) (attr smd) (fp_text reference BAT_R2 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 "Net-(BAT_R2-Pad2)")) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 "Net-(BAT_R2-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0432A) (at 149.75 108 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DF1DCDB) (attr smd) (fp_text reference C1 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /VDD)) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0433A) (at 163.218919 112.555214 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DF2F09F) (attr smd) (fp_text reference C2 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 "Net-(C2-Pad2)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0434A) (at 165.218919 112.555214 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DF2EAE4) (attr smd) (fp_text reference C3 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 "Net-(C2-Pad2)")) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0436A) (at 127.475001 116.225001) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DC9F91F) (attr smd) (fp_text reference IN_C1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 56 /IN1)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0437A) (at 127.475001 118.175001) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DC9F87F) (attr smd) (fp_text reference IN_C2 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 57 /IN2)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0438A) (at 131.225001 116.225001) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5DC9ED6A) (attr smd) (fp_text reference IN_C3 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 58 /IN3)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0439A) (at 127.475001 120.125001) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5DC8E275) (attr smd) (fp_text reference IN_R1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 59 "Net-(IN_J1-Pad1)")) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 56 /IN1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD043AA) (at 132.1 123.2 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5DC8E6EC) (attr smd) (fp_text reference IN_R2 (at 0 -1.65 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.65 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 57 /IN2)) (pad 1 smd roundrect (at -0.9375 0 180) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 60 "Net-(IN_J1-Pad3)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD043BA) (at 128.15 124.1) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5DC8E786) (attr smd) (fp_text reference IN_R3 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 61 "Net-(IN_J1-Pad5)")) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 58 /IN3)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD043CA) (at 145 110.5 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D828461) (attr smd) (fp_text reference PWR_C1 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 13 "Net-(CONN_USB1-Pad1)")) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD043DA) (at 140.25 88.25 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D9E838D) (attr smd) (fp_text reference PWR_C3 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 /VCC)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD043EA) (at 151.25 86 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D9E842A) (attr smd) (fp_text reference PWR_C4 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7u (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 /V_LED)) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD043FA) (at 168.8 119.15 270) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D828388) (attr smd) (fp_text reference PWR_C5 (at 0 -1.65 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 270) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /VDD)) (pad 2 smd roundrect (at 0.9375 0 270) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0440A) (at 169 116.25) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D82838F) (attr smd) (fp_text reference PWR_C6 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /VDD)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0441A) (at 165.5 116.25) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags capacitor) (path /5D828396) (attr smd) (fp_text reference PWR_C7 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 /VCC)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 5DD0442A) (at 147.75 107 90) (descr "SOT-23, Standard") (tags SOT-23) (path /5D82843D) (attr smd) (fp_text reference PWR_Q1 (at 0 -2.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value DMG2301L (at 0 2.5 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 180) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1)) (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1)) (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1)) (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12)) (pad 1 smd rect (at -1 -0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 2 /VBUS)) (pad 2 smd rect (at -1 0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 34 "Net-(PWR_CONN1-Pad2)")) (pad 3 smd rect (at 1 0 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 3 /VBAT)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0443E) (at 162.8 119.15 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5D82839D) (attr smd) (fp_text reference PWR_R1 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 /VCC)) (pad 1 smd roundrect (at -0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 35 "Net-(PWR_R1-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0444E) (at 169.164 105.664) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5DE9F11F) (attr smd) (fp_text reference R1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /VDD)) (pad 2 smd roundrect (at 0.9375 0) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 20 /SWCLK)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0445E) (at 153.56 124.134 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5DD12932) (attr smd) (fp_text reference R2 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7k (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 1 smd roundrect (at -0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /VDD)) (pad 2 smd roundrect (at 0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 /SDA)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric (layer F.Cu) (tedit 5B36C52B) (tstamp 5DD0446E) (at 151.56 124.134 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags resistor) (path /5DD21D85) (attr smd) (fp_text reference R3 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7k (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (fp_line (start 1.68 0.95) (end -1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.68 -0.95) (end 1.68 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 -0.95) (end 1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.68 0.95) (end -1.68 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.258578 0.71) (end 0.258578 0.71) (layer F.SilkS) (width 0.12)) (fp_line (start -0.258578 -0.71) (end 0.258578 -0.71) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.6) (end -1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.6) (end 1 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.6) (end 1 -0.6) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.6) (end -1 -0.6) (layer F.Fab) (width 0.1)) (pad 2 smd roundrect (at 0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 /SCL)) (pad 1 smd roundrect (at -0.9375 0 90) (size 0.975 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 /VDD)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical (layer F.Cu) (tedit 59FED6E3) (tstamp 5DEC60FB) (at 151.75 118.25 90) (descr "Through hole straight pin header, 1x04, 1.27mm pitch, single row") (tags "Through hole pin header THT 1x04 1.27mm single row") (path /5C73609E) (fp_text reference J_I2C1 (at 0 -1.695 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x04 (at 0 5.505 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.525 -0.635) (end 1.05 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.05 -0.635) (end 1.05 4.445) (layer F.Fab) (width 0.1)) (fp_line (start 1.05 4.445) (end -1.05 4.445) (layer F.Fab) (width 0.1)) (fp_line (start -1.05 4.445) (end -1.05 -0.11) (layer F.Fab) (width 0.1)) (fp_line (start -1.05 -0.11) (end -0.525 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.11 4.505) (end -0.30753 4.505) (layer F.SilkS) (width 0.12)) (fp_line (start 0.30753 4.505) (end 1.11 4.505) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0.76) (end -1.11 4.505) (layer F.SilkS) (width 0.12)) (fp_line (start 1.11 0.76) (end 1.11 4.505) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0.76) (end -0.563471 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 0.563471 0.76) (end 1.11 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0) (end -1.11 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -0.76) (end 0 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.55 -1.15) (end -1.55 4.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.55 4.95) (end 1.55 4.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.55 4.95) (end 1.55 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.55 -1.15) (end -1.55 -1.15) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 1.905 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0 90) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 8 /SDA)) (pad 2 thru_hole oval (at 0 1.27 90) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 7 /SCL)) (pad 3 thru_hole oval (at 0 2.54 90) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 11 /VDD)) (pad 4 thru_hole oval (at 0 3.81 90) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_1x04_P1.27mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical (layer F.Cu) (tedit 59FED6E3) (tstamp 5DEC6114) (at 160.02 124.206 270) (descr "Through hole straight pin header, 1x02, 1.27mm pitch, single row") (tags "Through hole pin header THT 1x02 1.27mm single row") (path /5C813C6C) (fp_text reference J_RESET1 (at 0 -1.695 270) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02 (at 0 2.965 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text user %R (at 0 0.635) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.55 -1.15) (end -1.55 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.55 2.45) (end 1.55 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.55 2.45) (end 1.55 2.45) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.55 -1.15) (end -1.55 2.45) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.11 -0.76) (end 0 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0) (end -1.11 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 0.563471 0.76) (end 1.11 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0.76) (end -0.563471 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 1.11 0.76) (end 1.11 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0.76) (end -1.11 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start 0.30753 1.965) (end 1.11 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 1.965) (end -0.30753 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start -1.05 -0.11) (end -0.525 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.05 1.905) (end -1.05 -0.11) (layer F.Fab) (width 0.1)) (fp_line (start 1.05 1.905) (end -1.05 1.905) (layer F.Fab) (width 0.1)) (fp_line (start 1.05 -0.635) (end 1.05 1.905) (layer F.Fab) (width 0.1)) (fp_line (start -0.525 -0.635) (end 1.05 -0.635) (layer F.Fab) (width 0.1)) (pad 2 thru_hole oval (at 0 1.27 270) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 1 GND)) (pad 1 thru_hole rect (at 0 0 270) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 21 /RESET)) (model ${KISYS3DMOD}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_1x02_P1.27mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical (layer F.Cu) (tedit 59FED6E3) (tstamp 5DEC612B) (at 147.75 111.25 180) (descr "Through hole straight pin header, 1x02, 1.27mm pitch, single row") (tags "Through hole pin header THT 1x02 1.27mm single row") (path /5D828407) (fp_text reference PWR_CONN1 (at 0 -1.695 180) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02 (at 0 2.965 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.525 -0.635) (end 1.05 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.05 -0.635) (end 1.05 1.905) (layer F.Fab) (width 0.1)) (fp_line (start 1.05 1.905) (end -1.05 1.905) (layer F.Fab) (width 0.1)) (fp_line (start -1.05 1.905) (end -1.05 -0.11) (layer F.Fab) (width 0.1)) (fp_line (start -1.05 -0.11) (end -0.525 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.11 1.965) (end -0.30753 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start 0.30753 1.965) (end 1.11 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0.76) (end -1.11 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start 1.11 0.76) (end 1.11 1.965) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0.76) (end -0.563471 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start 0.563471 0.76) (end 1.11 0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 0) (end -1.11 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.11 -0.76) (end 0 -0.76) (layer F.SilkS) (width 0.12)) (fp_line (start -1.55 -1.15) (end -1.55 2.45) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.55 2.45) (end 1.55 2.45) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.55 2.45) (end 1.55 -1.15) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.55 -1.15) (end -1.55 -1.15) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0.635 -90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole rect (at 0 0 180) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 32 /VCC)) (pad 2 thru_hole oval (at 0 1.27 180) (size 1 1) (drill 0.65) (layers *.Cu *.Mask) (net 34 "Net-(PWR_CONN1-Pad2)")) (model ${KISYS3DMOD}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_1x02_P1.27mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (gr_line (start 136.5 93) (end 136.5 100) (layer F.SilkS) (width 0.2) (tstamp 5DBE590E)) (gr_line (start 137.5 101) (end 144.5 101) (layer F.SilkS) (width 0.2) (tstamp 5DBE5926)) (gr_line (start 145.5 100) (end 145.5 93) (layer F.SilkS) (width 0.2) (tstamp 5DBE5929)) (gr_line (start 144.5 92) (end 137.5 92) (layer F.SilkS) (width 0.2) (tstamp 5DBE592C)) (gr_line (start 134 121.5) (end 134 71.5) (layer Edge.Cuts) (width 0.1)) (gr_line (start 184 121.5) (end 134 121.5) (layer Edge.Cuts) (width 0.1) (tstamp 5DBF2F18)) (gr_line (start 184 71.5) (end 184 121.5) (layer Edge.Cuts) (width 0.1)) (gr_line (start 134 71.5) (end 184 71.5) (layer Edge.Cuts) (width 0.1)) (gr_line (start 174.25 114.5) (end 181.25 114.5) (layer F.SilkS) (width 0.2) (tstamp 5DBDE8D1)) (gr_line (start 182.25 113.5) (end 182.25 106.5) (layer F.SilkS) (width 0.2) (tstamp 5DBDE8D0)) (gr_line (start 181.25 105.5) (end 174.25 105.5) (layer F.SilkS) (width 0.2) (tstamp 5DBDE8CF)) (gr_line (start 173.25 106.5) (end 173.25 113.5) (layer F.SilkS) (width 0.2) (tstamp 5DBDE8CE)) (gr_line (start 173.25 79.5) (end 173.25 86.5) (layer F.SilkS) (width 0.2)) (gr_line (start 181.25 78.5) (end 174.25 78.5) (layer F.SilkS) (width 0.2)) (gr_line (start 182.25 86.5) (end 182.25 79.5) (layer F.SilkS) (width 0.2)) (gr_line (start 174.25 87.5) (end 181.25 87.5) (layer F.SilkS) (width 0.2)) (gr_line (start 154 103.25) (end 154 90.75) (layer F.SilkS) (width 0.2)) (gr_line (start 147 103.25) (end 154 103.25) (layer F.SilkS) (width 0.2)) (gr_line (start 147 90.75) (end 147 103.25) (layer F.SilkS) (width 0.2)) (gr_line (start 154 90.75) (end 147 90.75) (layer F.SilkS) (width 0.2)) (segment (start 165.143919 111.455214) (end 165.218919 111.530214) (width 0.45) (layer F.Cu) (net 1) (status 30)) (via (at 164.218919 112.555214) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1) (tstamp 5DBE5663)) (via (at 166.718919 112.555214) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1) (tstamp 5DBE5665)) (via (at 166.718919 110.555214) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1) (tstamp 5DBE5667)) (segment (start 165.218919 109.580214) (end 165.243919 109.555214) (width 0.45) (layer F.Cu) (net 1) (status 30)) (segment (start 165.218919 111.530214) (end 165.218919 109.580214) (width 0.45) (layer F.Cu) (net 1) (status 30)) (via (at 164.218919 110.555214) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1) (tstamp 5DBF5431)) (via (at 166.718919 108.555214) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1) (tstamp 5DBF544F)) (via (at 164.218919 108.555214) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1) (tstamp 5DBF5451)) (segment (start 165.056419 111.455214) (end 165.218919 111.617714) (width 0.45) (layer F.Cu) (net 1)) (segment (start 160.218919 111.455214) (end 165.056419 111.455214) (width 0.45) (layer F.Cu) (net 1)) (segment (start 129.175 110.95) (end 129.25 111.025) (width 0.45) (layer F.Cu) (net 2) (status 30)) (segment (start 127.35 110.95) (end 129.175 110.95) (width 0.45) (layer F.Cu) (net 2) (status 30)) (segment (start 130.25 105) (end 129.3125 105) (width 0.45) (layer F.Cu) (net 2) (status 20)) (segment (start 130.75 110.25) (end 130.75 105.5) (width 0.45) (layer F.Cu) (net 2)) (segment (start 129.975 111.025) (end 130.75 110.25) (width 0.45) (layer F.Cu) (net 2)) (segment (start 130.75 105.5) (end 130.25 105) (width 0.45) (layer F.Cu) (net 2)) (segment (start 129.25 111.025) (end 129.975 111.025) (width 0.45) (layer F.Cu) (net 2) (status 10)) (segment (start 123.325 110.95) (end 123.25 111.025) (width 0.45) (layer F.Cu) (net 3) (status 30)) (segment (start 125.15 110.95) (end 123.325 110.95) (width 0.45) (layer F.Cu) (net 3) (status 30)) (segment (start 127.375 109.025) (end 127.35 109.05) (width 0.45) (layer F.Cu) (net 4) (status 30)) (segment (start 127.375 107) (end 127.375 109.025) (width 0.45) (layer F.Cu) (net 4) (status 30)) (segment (start 125.175 105) (end 125.15 105.025) (width 0.45) (layer F.Cu) (net 5) (status 30)) (segment (start 127.3875 105) (end 125.175 105) (width 0.45) (layer F.Cu) (net 5) (status 30)) (segment (start 125.15 107.075) (end 125.15 109.05) (width 0.45) (layer F.Cu) (net 6) (status 30)) (segment (start 162.981419 109.855214) (end 163.281419 109.555214) (width 0.45) (layer F.Cu) (net 11)) (segment (start 160.218919 109.855214) (end 162.981419 109.855214) (width 0.45) (layer F.Cu) (net 11)) (segment (start 163.218919 113.580214) (end 165.218919 113.580214) (width 0.45) (layer F.Cu) (net 12)) (segment (start 161.893919 112.255214) (end 163.218919 113.580214) (width 0.45) (layer F.Cu) (net 12)) (segment (start 160.218919 112.255214) (end 161.893919 112.255214) (width 0.45) (layer F.Cu) (net 12)) (segment (start 142.95 109.9) (end 142.95 110.35) (width 0.2) (layer F.Cu) (net 13) (tstamp 5DCD8CA6) (status 20)) (segment (start 142.6 109.55) (end 142.95 109.9) (width 0.2) (layer F.Cu) (net 13) (tstamp 5DCD8CA9)) (segment (start 139.65 109.55) (end 142.6 109.55) (width 0.2) (layer F.Cu) (net 13) (tstamp 5DCD8CA3) (status 10)) (via (at 143.75 112.75) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 14)) (segment (start 141.4 110.2) (end 139.65 110.2) (width 0.2) (layer F.Cu) (net 14) (tstamp 5DCD8C9D) (status 30)) (segment (start 141.55 110.35) (end 141.4 110.2) (width 0.2) (layer F.Cu) (net 14) (tstamp 5DCD8CA0) (status 30)) (via (at 158 112.25) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 14) (tstamp 5DC6DDED)) (segment (start 157.968919 112.281081) (end 158 112.25) (width 0.2) (layer F.Cu) (net 14)) (segment (start 157.968919 115.305214) (end 157.968919 112.281081) (width 0.2) (layer F.Cu) (net 14)) (segment (start 142.530701 110.85) (end 142.530701 110.830701) (width 0.2) (layer F.Cu) (net 14)) (segment (start 142.530701 110.830701) (end 142.05 110.35) (width 0.2) (layer F.Cu) (net 14)) (segment (start 142.05 110.35) (end 141.55 110.35) (width 0.2) (layer F.Cu) (net 14)) (segment (start 141.55 110.85) (end 139.65 110.85) (width 0.2) (layer F.Cu) (net 15) (tstamp 5DCD8C9A) (status 30)) (segment (start 141.55 110.85) (end 141.965002 110.85) (width 0.2) (layer F.Cu) (net 15)) (segment (start 141.965002 110.85) (end 142.25 111.134998) (width 0.2) (layer F.Cu) (net 15)) (via (at 158.75 113.25) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 15) (tstamp 5DC6DDE8)) (segment (start 158.768919 113.268919) (end 158.75 113.25) (width 0.2) (layer F.Cu) (net 15)) (segment (start 158.768919 115.305214) (end 158.768919 113.268919) (width 0.2) (layer F.Cu) (net 15)) (via (at 142.75 112.75) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 15)) (segment (start 142.25 111.565002) (end 142.484999 111.800001) (width 0.2) (layer F.Cu) (net 15)) (segment (start 142.25 111.134998) (end 142.25 111.565002) (width 0.2) (layer F.Cu) (net 15)) (segment (start 161.258921 113.055214) (end 161.75 113.546293) (width 0.45) (layer F.Cu) (net 21)) (segment (start 160.218919 113.055214) (end 161.258921 113.055214) (width 0.45) (layer F.Cu) (net 21)) (segment (start 161.75 113.546293) (end 161.75 114.5) (width 0.45) (layer F.Cu) (net 21)) (segment (start 163.095 102.905) (end 163 103) (width 0.45) (layer F.Cu) (net 22) (status 30)) (segment (start 165.425 102.905) (end 163.095 102.905) (width 0.45) (layer F.Cu) (net 22) (status 30)) (segment (start 165.425 92.405) (end 163.095 92.405) (width 0.45) (layer F.Cu) (net 25) (status 30)) (segment (start 163.345 81.905) (end 165.425 81.905) (width 0.45) (layer F.Cu) (net 26) (status 20)) (segment (start 163 82.25) (end 163.345 81.905) (width 0.45) (layer F.Cu) (net 26)) (segment (start 163 85.5) (end 163 82.25) (width 0.45) (layer F.Cu) (net 26) (status 10)) (segment (start 175.385 80.635) (end 176.698179 81.948179) (width 0.45) (layer F.Cu) (net 29) (status 20)) (segment (start 170.575 80.635) (end 175.385 80.635) (width 0.45) (layer F.Cu) (net 29) (status 10)) (segment (start 178.678077 84.051821) (end 176.989949 85.739949) (width 0.45) (layer F.Cu) (net 30) (status 30)) (segment (start 178.801821 84.051821) (end 178.678077 84.051821) (width 0.45) (layer F.Cu) (net 30) (status 30)) (segment (start 163.555 88.595) (end 163.15 89) (width 0.45) (layer F.Cu) (net 39) (status 30)) (segment (start 165.425 88.595) (end 163.555 88.595) (width 0.45) (layer F.Cu) (net 39) (status 30)) (segment (start 163.555 99.095) (end 163.15 99.5) (width 0.45) (layer F.Cu) (net 40) (status 30)) (segment (start 165.425 99.095) (end 163.555 99.095) (width 0.45) (layer F.Cu) (net 40) (status 30)) (segment (start 165.41 101.65) (end 165.425 101.635) (width 0.45) (layer F.Cu) (net 41) (status 30)) (segment (start 158 101.65) (end 165.41 101.65) (width 0.45) (layer F.Cu) (net 41) (status 30)) (segment (start 157.168919 105.281081) (end 158 104.45) (width 0.45) (layer F.Cu) (net 42) (status 20)) (segment (start 157.168919 106.805214) (end 157.168919 105.281081) (width 0.45) (layer F.Cu) (net 42) (status 10)) (segment (start 155.568919 96.331081) (end 158 93.9) (width 0.45) (layer F.Cu) (net 43) (status 20)) (segment (start 155.568919 106.805214) (end 155.568919 96.331081) (width 0.45) (layer F.Cu) (net 43) (status 10)) (segment (start 153.968919 84.381081) (end 157.6 80.75) (width 0.45) (layer F.Cu) (net 44) (status 20)) (segment (start 153.968919 106.805214) (end 153.968919 84.381081) (width 0.45) (layer F.Cu) (net 44)) (segment (start 155.837838 78.25) (end 160.35 78.25) (width 0.45) (layer F.Cu) (net 45) (status 20)) (segment (start 153.168919 80.918919) (end 155.837838 78.25) (width 0.45) (layer F.Cu) (net 45)) (segment (start 153.168919 106.805214) (end 153.168919 80.918919) (width 0.45) (layer F.Cu) (net 45)) (segment (start 154.768919 106.805214) (end 154.768919 90.768919) (width 0.45) (layer F.Cu) (net 46) (status 10)) (segment (start 156.537838 89) (end 160.35 89) (width 0.45) (layer F.Cu) (net 46) (status 20)) (segment (start 154.768919 90.768919) (end 156.537838 89) (width 0.45) (layer F.Cu) (net 46)) (segment (start 156.368919 106.805214) (end 156.368919 100.381081) (width 0.45) (layer F.Cu) (net 47) (status 10)) (segment (start 157.25 99.5) (end 160.35 99.5) (width 0.45) (layer F.Cu) (net 47) (status 20)) (segment (start 156.368919 100.381081) (end 157.25 99.5) (width 0.45) (layer F.Cu) (net 47)) (segment (start 176.25 94.52) (end 175.02 94.52) (width 0.45) (layer F.Cu) (net 48) (status 10)) (segment (start 176.25 95.79) (end 175 94.54) (width 0.45) (layer F.Cu) (net 48) (status 10)) (segment (start 176.25 93.25) (end 173.71 93.25) (width 0.45) (layer F.Cu) (net 48) (status 10)) (segment (start 175 94.54) (end 173.71 93.25) (width 0.45) (layer F.Cu) (net 48)) (segment (start 171.595 91.135) (end 170.575 91.135) (width 0.45) (layer F.Cu) (net 48) (status 20)) (segment (start 173.71 93.25) (end 171.595 91.135) (width 0.45) (layer F.Cu) (net 48)) (segment (start 177.52 90.87) (end 177.4 90.75) (width 0.45) (layer F.Cu) (net 49) (status 30)) (segment (start 177.52 91.12) (end 177.4 91) (width 0.45) (layer F.Cu) (net 49) (status 30)) (segment (start 177.52 93.25) (end 177.52 91.12) (width 0.45) (layer F.Cu) (net 49) (status 30)) (segment (start 178.227106 94.52) (end 177.52 94.52) (width 0.45) (layer F.Cu) (net 50) (status 20)) (segment (start 178.65 94.097106) (end 178.227106 94.52) (width 0.45) (layer F.Cu) (net 50)) (segment (start 178.65 90.225) (end 178.65 94.097106) (width 0.45) (layer F.Cu) (net 50)) (segment (start 179.15 89.725) (end 178.65 90.225) (width 0.45) (layer F.Cu) (net 50)) (segment (start 179.15 88.75) (end 179.15 89.725) (width 0.45) (layer F.Cu) (net 50) (status 10)) (segment (start 177.56 95.75) (end 177.52 95.79) (width 0.45) (layer F.Cu) (net 51) (status 30)) (segment (start 177.91 95.4) (end 177.52 95.79) (width 0.45) (layer F.Cu) (net 51) (status 30)) (segment (start 180.25 95.4) (end 177.91 95.4) (width 0.45) (layer F.Cu) (net 51) (status 30)) (segment (start 171.675 101.635) (end 170.575 101.635) (width 0.45) (layer F.Cu) (net 52) (status 20)) (segment (start 175.02 98.33) (end 176.25 98.33) (width 0.45) (layer F.Cu) (net 52) (status 20)) (segment (start 175 98.31) (end 175.02 98.33) (width 0.45) (layer F.Cu) (net 52)) (segment (start 176.25 97.06) (end 175 98.31) (width 0.45) (layer F.Cu) (net 52) (status 10)) (segment (start 175 98.31) (end 173.75 99.56) (width 0.45) (layer F.Cu) (net 52)) (segment (start 173.79 99.6) (end 176.25 99.6) (width 0.45) (layer F.Cu) (net 52) (status 20)) (segment (start 173.75 99.56) (end 171.675 101.635) (width 0.45) (layer F.Cu) (net 52)) (segment (start 177.81 97.35) (end 177.52 97.06) (width 0.45) (layer F.Cu) (net 53) (status 30)) (segment (start 180.25 97.35) (end 177.81 97.35) (width 0.45) (layer F.Cu) (net 53) (status 30)) (segment (start 177.54 98.35) (end 177.52 98.33) (width 0.45) (layer F.Cu) (net 54) (status 30)) (segment (start 178.227106 98.33) (end 177.52 98.33) (width 0.45) (layer F.Cu) (net 54) (status 20)) (segment (start 178.65 98.752894) (end 178.227106 98.33) (width 0.45) (layer F.Cu) (net 54)) (segment (start 179.15 103.275) (end 179.15 104.25) (width 0.45) (layer F.Cu) (net 54) (status 20)) (segment (start 178.65 102.775) (end 179.15 103.275) (width 0.45) (layer F.Cu) (net 54)) (segment (start 178.65 98.752894) (end 178.65 102.775) (width 0.45) (layer F.Cu) (net 54)) (segment (start 177.52 101.88) (end 177.4 102) (width 0.45) (layer F.Cu) (net 55) (status 30)) (segment (start 177.52 99.6) (end 177.52 101.88) (width 0.45) (layer F.Cu) (net 55) (status 30)) (zone (net 0) (net_name "") (layer F.Cu) (tstamp 0) (hatch edge 0.508) (connect_pads (clearance 0.508)) (min_thickness 0.254) (fill yes (arc_segments 16) (thermal_gap 0.508) (thermal_bridge_width 0.508)) (polygon (pts (xy 169.5 82.75) (xy 171.683721 82.75) (xy 171.683721 87.75) (xy 169.5 87.75) (xy 169.5 93.25) (xy 171.75 93.25) (xy 171.75 98.25) (xy 169.5 98.25) (xy 169.5 103.75) (xy 166.5 103.75) (xy 166.5 98.25) (xy 164.25 98.25) (xy 164.25 93.25) (xy 166.5 93.25) (xy 166.5 87.75) (xy 164.183721 87.75) (xy 164.183721 82.75) (xy 166.5 82.75) (xy 166.5 77.25) (xy 169.5 77.25) ) ) (filled_polygon (pts (xy 169.161673 77.435301) (xy 169.065 77.66869) (xy 169.065 77.80925) (xy 169.077146 77.821396) (xy 169.05256 77.945) (xy 169.05256 78.245) (xy 169.077146 78.368604) (xy 169.065 78.38075) (xy 169.065 78.52131) (xy 169.151442 78.73) (xy 169.065 78.93869) (xy 169.065 79.07925) (xy 169.077146 79.091396) (xy 169.05256 79.215) (xy 169.05256 79.515) (xy 169.077146 79.638604) (xy 169.065 79.65075) (xy 169.065 79.79131) (xy 169.161673 80.024699) (xy 169.194791 80.057817) (xy 169.113262 80.179833) (xy 169.05256 80.485) (xy 169.05256 80.785) (xy 169.113262 81.090167) (xy 169.233422 81.27) (xy 169.113262 81.449833) (xy 169.05256 81.755) (xy 169.05256 82.055) (xy 169.113262 82.360167) (xy 169.286125 82.618875) (xy 169.373 82.676923) (xy 169.373 82.75) (xy 169.382667 82.798601) (xy 169.410197 82.839803) (xy 169.451399 82.867333) (xy 169.5 82.877) (xy 171.556721 82.877) (xy 171.556721 87.217271) (xy 171.554381 87.223526) (xy 171.556721 87.290893) (xy 171.556721 87.623) (xy 169.5 87.623) (xy 169.451399 87.632667) (xy 169.410197 87.660197) (xy 169.382667 87.701399) (xy 169.374489 87.742512) (xy 169.340302 87.756673) (xy 169.161673 87.935301) (xy 169.065 88.16869) (xy 169.065 88.30925) (xy 169.077146 88.321396) (xy 169.05256 88.445) (xy 169.05256 88.745) (xy 169.077146 88.868604) (xy 169.065 88.88075) (xy 169.065 89.02131) (xy 169.151442 89.23) (xy 169.065 89.43869) (xy 169.065 89.57925) (xy 169.077146 89.591396) (xy 169.05256 89.715) (xy 169.05256 90.015) (xy 169.077146 90.138604) (xy 169.065 90.15075) (xy 169.065 90.29131) (xy 169.161673 90.524699) (xy 169.194791 90.557817) (xy 169.113262 90.679833) (xy 169.05256 90.985) (xy 169.05256 91.285) (xy 169.113262 91.590167) (xy 169.233422 91.77) (xy 169.113262 91.949833) (xy 169.05256 92.255) (xy 169.05256 92.555) (xy 169.113262 92.860167) (xy 169.286125 93.118875) (xy 169.373 93.176923) (xy 169.373 93.25) (xy 169.382667 93.298601) (xy 169.410197 93.339803) (xy 169.451399 93.367333) (xy 169.5 93.377) (xy 171.623 93.377) (xy 171.623 98.123) (xy 169.5 98.123) (xy 169.451399 98.132667) (xy 169.410197 98.160197) (xy 169.382667 98.201399) (xy 169.374489 98.242512) (xy 169.340302 98.256673) (xy 169.161673 98.435301) (xy 169.065 98.66869) (xy 169.065 98.80925) (xy 169.077146 98.821396) (xy 169.05256 98.945) (xy 169.05256 99.245) (xy 169.077146 99.368604) (xy 169.065 99.38075) (xy 169.065 99.52131) (xy 169.151442 99.73) (xy 169.065 99.93869) (xy 169.065 100.07925) (xy 169.077146 100.091396) (xy 169.05256 100.215) (xy 169.05256 100.515) (xy 169.077146 100.638604) (xy 169.065 100.65075) (xy 169.065 100.79131) (xy 169.161673 101.024699) (xy 169.194791 101.057817) (xy 169.113262 101.179833) (xy 169.05256 101.485) (xy 169.05256 101.785) (xy 169.113262 102.090167) (xy 169.233422 102.27) (xy 169.113262 102.449833) (xy 169.05256 102.755) (xy 169.05256 103.055) (xy 169.113262 103.360167) (xy 169.286125 103.618875) (xy 169.292299 103.623) (xy 166.707701 103.623) (xy 166.713875 103.618875) (xy 166.886738 103.360167) (xy 166.94744 103.055) (xy 166.94744 102.755) (xy 166.886738 102.449833) (xy 166.766578 102.27) (xy 166.886738 102.090167) (xy 166.94744 101.785) (xy 166.94744 101.485) (xy 166.886738 101.179833) (xy 166.766578 101) (xy 166.886738 100.820167) (xy 166.94744 100.515) (xy 166.94744 100.215) (xy 166.886738 99.909833) (xy 166.766578 99.73) (xy 166.886738 99.550167) (xy 166.94744 99.245) (xy 166.94744 98.945) (xy 166.886738 98.639833) (xy 166.713875 98.381125) (xy 166.627 98.323077) (xy 166.627 98.25) (xy 166.617333 98.201399) (xy 166.589803 98.160197) (xy 166.548601 98.132667) (xy 166.5 98.123) (xy 164.377 98.123) (xy 164.377 93.829088) (xy 164.498157 93.647765) (xy 164.54744 93.4) (xy 164.54744 93.377) (xy 166.5 93.377) (xy 166.548601 93.367333) (xy 166.589803 93.339803) (xy 166.617333 93.298601) (xy 166.627 93.25) (xy 166.627 93.176923) (xy 166.713875 93.118875) (xy 166.886738 92.860167) (xy 166.94744 92.555) (xy 166.94744 92.255) (xy 166.886738 91.949833) (xy 166.766578 91.77) (xy 166.886738 91.590167) (xy 166.94744 91.285) (xy 166.94744 90.985) (xy 166.886738 90.679833) (xy 166.766578 90.5) (xy 166.886738 90.320167) (xy 166.94744 90.015) (xy 166.94744 89.715) (xy 166.886738 89.409833) (xy 166.766578 89.23) (xy 166.886738 89.050167) (xy 166.94744 88.745) (xy 166.94744 88.445) (xy 166.886738 88.139833) (xy 166.713875 87.881125) (xy 166.627 87.823077) (xy 166.627 87.75) (xy 166.617333 87.701399) (xy 166.589803 87.660197) (xy 166.548601 87.632667) (xy 166.5 87.623) (xy 164.310721 87.623) (xy 164.310721 86.889272) (xy 164.357809 86.857809) (xy 164.498157 86.647765) (xy 164.54744 86.4) (xy 164.54744 84.6) (xy 164.498157 84.352235) (xy 164.357809 84.142191) (xy 164.310721 84.110728) (xy 164.310721 82.877) (xy 166.5 82.877) (xy 166.548601 82.867333) (xy 166.589803 82.839803) (xy 166.617333 82.798601) (xy 166.627 82.75) (xy 166.627 82.676923) (xy 166.713875 82.618875) (xy 166.886738 82.360167) (xy 166.94744 82.055) (xy 166.94744 81.755) (xy 166.886738 81.449833) (xy 166.766578 81.27) (xy 166.886738 81.090167) (xy 166.94744 80.785) (xy 166.94744 80.485) (xy 166.886738 80.179833) (xy 166.766578 80) (xy 166.886738 79.820167) (xy 166.94744 79.515) (xy 166.94744 79.215) (xy 166.886738 78.909833) (xy 166.766578 78.73) (xy 166.886738 78.550167) (xy 166.94744 78.245) (xy 166.94744 77.945) (xy 166.886738 77.639833) (xy 166.713875 77.381125) (xy 166.707701 77.377) (xy 169.219974 77.377) ) ) ) )