Communication problem between ESP and STM

Actions

Dashboard

Inverter messages

Command

» 

Firmware

Web Interface

Update

On this page you can apply software updates to your OpenInverter system. There are several distinct pieces of software which go to make up an OpenInverter system and each has a separate update mechanism.

OpenInverter Board Bootloader

Use the stm32_loader.bin file to update the bootloader on your OpenInverter board. You can find download links in the forum here.

OpenInverter Board Firmware

To install a new firmware on your OpenInverter board click on the 'Install firmware from file' button on the right. Use the stm32_sine.bin file to install the sine firmware or use the stm32_foc.bin file to install the FOC firmware. You can find information about the latest available releases, including download links, on the OpenInverter forum here.

Web Interface Firmware

The ESP8266 firmware can be upgraded with platformio via OTA i.e. directly via wifi without programming cable, see forum.
You can also program with a cable, see here for more details.

Web Interface Application

You can apply updates to this web interface by uploading individual files. More information about updating the web interface can be found in its github repository here.

Save & Load

Parameter Database

Misc

Parameters

I Name Value Unit Min Max Default

Spot Values

Name Value Unit

Actions

Configure Plot

Data points :
Burst length :

Plot

Copyright 2018 Johannes Huebner dev@johanneshuebner.com

Charting by chart.js

Gauges by Mykhailo Stadnyk

Actions

Configure Logger



Data Logger

Actions

CAN Mapping

On this page you can configure the CAN mapping settings for your OpenInverter board. CAN mapping allows you to send and receive data via CAN bus. You can specify spot values that you would like to transmit on the CAN bus. Additionally you can specify spot values that you would like to set based on data received on the CAN bus.

A maximum of 8 items per CAN message can be mapped.

Existing CAN Mappings

Spot Value Transmit or Receive ID Offset Length Gain Delete Mapping

Actions

Files

Filename Delete

Actions

Support

You can get support from the community on the OpenInverter Forum.

Paid support is also available. See details here.