GlyphWiki does not have an article with this exact name.
To create a new glyph, please first fill in the text box below. When you do so, please note the copyright. その後、ページ下部の*** Please confirm the following before posting ***以下の注意事項をよく確認した上で “$BUTTON_ACCEPT_AND_SUBMIT” ボタンを押してください。そうすればすぐに見えるようになります。
GlyphWiki does not have an article with this exact name.
To create a new text, please first fill in the text box below. When you do so, please note the copyright. その際、著作権に注意してください。その後、ページ下部の*** Please confirm the following before posting ***以下の注意事項をよく確認した上で “$BUTTON_ACCEPT_AND_SUBMIT” ボタンを押してください。そうすればすぐに見えるようになります。
Someone else has changed this page since you started editing it. The left image contains the glyph as it currently exists. Your changes are shown in the right image. You will have to edit again. The content you edited will be saved when you press "save page".
Someone else has changed this page since you started editing it. The upper text box contains the page text as it currently exists. Your changes are shown in the lower text box. You will have to merge your changes into the existing text. Only the text in the upper text box will be saved when you press "save page".
Failed to write to the database. Many users are accessing simultaneously, or the server may be experiencing heavy load. Your changes are still not saved, so please save again. Your changes are saved when you click on "save page".
There is an error at glyph data or at related char and it wasn't registered yet. Please check the content and contribute again. The content you edited will be saved when you press "save page".
You are not currently logged in. If you continue to edit, your edits will be recorded in the history as having been done by an anonymous user. In addition, you must preview before saving. |;
:353
$buffer .= "匿名利用者は外部リンクを含むページを投稿することはできません。
";
$buffer .= "Anonymous users are not allowed to save pages that contain external links.
";
:362
$buffer .= qq|
プレビュー
これはプレビューです。まだ保存されていません!
|;
$buffer .= qq|
Preview
Remember that this is only a preview; any changes have not yet been saved!
The related character of a UCS glyph cannot be another character or undefined (〓). In order to add relationships to another character, please request the addition of a variant character relationship at $WORD_MUSTRELATE.
|;
:447
$buffer .= qq|
他のグリフがこのグリフ(あるいはこのグリフの古い版)を引用しているので実際には削除できません。
|;
$buffer .= qq|
>Other glyphs are quoting this glyph (or an older revision), so it cannot be deleted.<
Specific revisions cannot be specified as the target of an alias. You must remove the revision specification or copy that revision's data to this glyph's contents (divide the parts in the glyph editor).
|;
:461
$buffer .= "
存在しないグリフをエイリアスとして参照しています。実際には登録できません!
";
$buffer .= "
The target of this alias doesn't exist. The glyph can't be saved like this!
This glyph is specified as an alias (alternate name of another glyph). If you continue to edit, it will become an independent glyph (or an alias of a different glyph) , and the relationship to the current glyph will be eliminated. If you want to continue to edit the relationship to the glyph being referred to, please edit the original glyph.
*** Please confirm the following before saving ***
By submitting an article to GlyphWiki, you are assigning copyright to it, and you are granting permission for it to be modified or used in any form, and you agree not to claim or use moral rights in it thereafter.
Please do not reprint, copy, or trace glyphs from other fonts or printed items without authorization. If the contents of your edits are problematic regardless, they will be deleted according to the deletion policy. Also, GlyphWiki's administration policy will be determined from now on, but the administrator is the one who has the final say. You are deemed to have agreed to these things in advance.
GlyphWiki's glyph/article license differs from Wikipedia's article license (GFDL). For details please refer to License.
*** Please confirm the following before saving ***
By submitting an article to GlyphWiki, you are assigning copyright to it, and you are granting permission for it to be modified or used in any form, and you agree not to claim or use moral rights in it thereafter.
Please do not reprint, copy, or trace documents from other webpages or published items without authorization. If the contents of your edits are problematic regardless, they will be deleted according to the deletion policy. Also, GlyphWiki's administration policy will be determined from now on, but the administrator is the one who has the final say. You are deemed to have agreed to these things in advance.
GlyphWiki's glyph/article license differs from Wikipedia's article license (GFDL). For details please refer to License.
|;
:1420
$buffer .= qq|
あなたの更新内容
|;
$buffer .= qq|
Your changes
|;
!/home/kamichi/work/glyphwiki/script/page_right_others.pl
:26
$title = qq|古い部品を引用しているグリフ|;
$title = qq|Glyphs that quote old revisions of parts|;
:29
$buffer .= qq!
View a list of glyphs that need updating based on this old part";
:91
$mustrenew_list .= " (残りは省略されています)";
$mustrenew_list .= " (the rest has been hidden)";
:102
$buffer .= qq|該当するグリフはありません。|;
$buffer .= qq|There are no relevant glyphs|;
:119
$title = qq|古い部品を引用しているグリフの一括更新|;
$title = qq|Batch update of glyphs that quote old revisions of parts|;
:123
$buffer .= qq|
$name Current: vs using the newest part revisions: ";
:195
$mustrenew_list .= "";
$mustrenew_list .= "";
:207,363
部品の配置について
About the positioning of parts
:208,364
標準では、古い部品の大きさと位置に合わせて新しい部品を配置しますが、変形させたり、固定させることができます。
Normally, new parts are positioned matching the size of the old parts, but the position can be transformed or fixed.
:211,367
部品の大きさを新旧で合わせる
Adjust the new part's size to the old part's size
:212
これが標準です。古い部品の大きさと位置に合わせて新しい部品を配置します。テキストボックスには何も入力しないでください
This is the standard behavior. Position the new part matching the size of the old part. Don't input anything into the text box for this.
:213,369
縦横ともに部品の大きさを基準に変形
Transform both height and width based on the old part's size
:214
標準配置後の部品の領域を調節できます。「type1,左上X座標への増分値,Y座標への増分値,右下X座標への増分値,Y座標への増分値」と入力してください 例: type1,5,-4,10,-20 (配置領域の左上座標について左に5ドット、上に4ドット移動、右下座標について10ドット右に、20ドット上に移動する)
The region of the post-standard-positioning part can be adjusted further. Please input as "type1,increase in the upper left X coordinate,increase in the Y coordinate,increase in the lower right X coordinate,increase in the Y coordinate". For example: type1,5,-4,10,-20 (upper left coordinate is moved 5 pixels to the left and 4 pixels upwards; lower right coordinate is moved 10 pixels to the right and 20 pixels downwards)
:215,371
縦横ともに新たな配置領域座標を記述
Write new positioning region coordinates for both height and width
:216
部品を指定した領域に配置します。「type2,左上X座標,Y座標,右下X座標,Y座標」と入力してください。
Position according to the specified region. Please input as "type2,upper left X coordinate,Y coordinate,lower right X coordinate,Y coordinate".
:217,373
横は部品の大きさを基準に変形、縦は新たな配置領域座標を記述
Transform width based on the old part's size; write new positioning region coordinates for height
:218
「type3,左上X座標への増分値,右下X座標への増分値,左上Y座標,右下Y座標」と入力してください(順番に注意)。
Please input as "type3,increase in the upper left X coordinate,increase in the lower right X coordinate,upper left Y coordinate,lower right Y coordinate" (note the order).
:219,375
横は新たな配置領域座標を記述、縦は部品の大きさを基準に変形
Write new positioning region coordinates for width; transform height based on the old part's size
:220
「type4,左上X座標,右下X座標,左上Y座標への増分値,右下Y座標への増分値」と入力してください(順番に注意)。
Please input as "type4,upper left X coordinate,lower right X coordinate,increase in the upper left Y coordinate,increase in the lower right Y coordinate" (note the order).
:228
$buffer .= " 配置調整指定:";
$buffer .= " Position adjustment: ";
:229,386
$buffer .= " ";
$buffer .= " ";
:243
$buffer .= "
Click the button to update the checkmarked glyphs without previewing. If there is a high number of glyphs to be updated, your web browser may display an error due to timeout but the update process will be executed without a problem.
$name Current: vs after update: ";
:351
$mustrenew_list .= "";
$mustrenew_list .= "";
:368
これが標準です。古い部品の大きさと位置に合わせて新しい部品を配置します。テキストボックスには置き換え部品グリフ名を入力してください
This is the standard behavior. Position the new part matching the size of the old part. Input the name of the new part glyph into the text box.
:370
標準配置後の部品の領域を調節できます。「置き換え部品グリフ名,type1,左上X座標への増分値,Y座標への増分値,右下X座標への増分値,Y座標への増分値」と入力してください 例: u6c38,type1,5,-4,10,-20 (配置領域の左上座標について左に5ドット、上に4ドット移動、右下座標について10ドット右に、20ドット上に移動する)
The region of the post-standard-positioning part can be adjusted further. Please input as "Replacement part glyph,type1,increase in the upper left X coordinate,increase in the Y coordinate,increase in the lower right X coordinate,increase in the Y coordinate". For example: u6c38,type1,5,-4,10,-20 (upper left coordinate is moved 5 pixels to the left and 4 pixels upwards; lower right coordinate is moved 10 pixels to the right and 20 pixels downwards)
:372
部品を指定した領域に配置します。「置き換え部品グリフ名,type2,左上X座標,Y座標,右下X座標,Y座標」と入力してください。
Position according to the specified region. Please input as "Replacement part glyph,type2,upper left X coordinate,Y coordinate,lower right X coordinate,Y coordinate".
:374
「置き換え部品グリフ名,type3,左上X座標への増分値,右下X座標への増分値,左上Y座標,右下Y座標」と入力してください(順番に注意)。
Please input as "Replacement part glyph,type3,increase in the upper left X coordinate,increase in the lower right X coordinate,upper left Y coordinate,lower right Y coordinate" (note the order).
:376
「置き換え部品グリフ名,type4,左上X座標,右下X座標,左上Y座標への増分値,右下Y座標への増分値,」と入力してください(順番に注意)。
Please input as "Replacement part glyph,type4,upper left X coordinate,lower right X coordinate,increase in the upper left Y coordinate,increase in the lower right Y coordinate," (note the order).
:385
$buffer .= " 置き換え部品グリフ、配置調整指定:";
$buffer .= " Replacement part glyph, position adjustment: ";
:401,405
$buffer .= qq|
Click the button to update the checkmarked glyphs without previewing. If there is a high number of glyphs to be updated, your web browser may display an error due to timeout but the update process will be executed without a problem.