(kicad_pcb (version 20260206) (generator "pcbnew") (generator_version "10.0")

  (general
    (thickness 1.6)
    (legacy_teardrops no)
  )

  (paper "User" 210 148)

  (layers
    (0 "F.Cu" signal)
    (31 "B.Cu" signal)
    (32 "B.Adhes" user "B.Adhesive")
    (33 "F.Adhes" user "F.Adhesive")
    (34 "B.Paste" user)
    (35 "F.Paste" user)
    (36 "B.SilkS" user "B.Silkscreen")
    (37 "F.SilkS" user "F.Silkscreen")
    (38 "B.Mask" user)
    (39 "F.Mask" user)
    (40 "Dwgs.User" user "User.Drawings")
    (41 "Cmts.User" user "User.Comments")
    (42 "Eco1.User" user "User.Eco1")
    (43 "Eco2.User" user "User.Eco2")
    (44 "Edge.Cuts" user)
    (45 "Margin" user)
    (46 "B.CrtYd" user "B.Courtyard")
    (47 "F.CrtYd" user "F.Courtyard")
    (48 "B.Fab" user "B.Fabrication")
    (49 "F.Fab" user "F.Fabrication")
    (50 "User.1" user)
    (51 "User.2" user)
    (52 "User.3" user)
    (53 "User.4" user)
    (54 "User.5" user)
    (55 "User.6" user)
    (56 "User.7" user)
    (57 "User.8" user)
    (58 "User.9" user)
  )

  (setup
    (pad_to_mask_clearance 0.1)
    (solder_mask_min_width 0.05)
    (allow_soldermask_bridges_in_footprints no)
    (pcbplotparams
      (layerselection 0x00010fc_ffffffff)
      (plot_on_all_layers_selection 0x0000000_00000000)
      (disableapertmacros no)
      (usegerberextensions no)
      (usegerberattributes yes)
      (usegerberadvancedattributes yes)
      (creategerberjobfile yes)
      (dashed_line_gap_ratio 0.5)
      (svguseinch no)
      (svgprecision 6)
      (excludeedgelayer yes)
      (plotframeref no)
      (viasonmask no)
      (mode 1)
      (useauxorigin no)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.0)
      (dxfpolygonmode yes)
      (dxfimperialunits yes)
      (dxfusepcbnewfont yes)
      (psnegative no)
      (psa4output no)
      (plotreference yes)
      (plotvalue yes)
      (plotinvisibletext no)
      (sketchpadsonfab no)
      (subtractmaskfromsilk yes)
      (outputformat 1)
      (mirror no)
      (drillshape 1)
      (scaleselection 1)
      (outputdirectory "gerbers/")
    )
  )

  (net 0 "")
  (net 1 "GND")
  (net 2 "+3V3")
  (net 3 "VBAT")
  (net 4 "VUSB")
  (net 5 "VUSB_IN")
  (net 6 "VSOLAR")
  (net 7 "VSOLAR_IN")
  (net 8 "ADC_CH0")
  (net 9 "ADC_CH1")
  (net 10 "ADC_CH2")
  (net 11 "1WIRE")
  (net 12 "I2C_SDA")
  (net 13 "I2C_SCL")
  (net 14 "GPIO13_LED")
  (net 15 "UART_TX")
  (net 16 "UART_RX")
  (net 17 "EN")
  (net 18 "BOOT")
  (net 19 "MPPT_REF")
  (net 20 "/CHRG_USB")
  (net 21 "/DONE_USB")
  (net 22 "/CHRG_SOLAR")
  (net 23 "/DONE_SOLAR")
  (net 24 "VLOOP")
  (net 25 "VBOOST_EN")
  (net 26 "CHRG_USB_DIS")
  (net 27 "SOLAR_DET")
  (net 28 "BATT_DIV_EN")
  (net 29 "ADS_DRDY")
  (net 30 "MAX_ALRT")
  (net 31 "LOOP_TERM_CH1")
  (net 32 "LOOP_TERM_CH2")
  (net 33 "+3V3_ADS")
  (net 34 "VBAT_RAW")

  (gr_line (start 65.000 46.500) (end 165.000 46.500)
    (stroke (width 0.05) (type solid)) (layer "Edge.Cuts")
    (uuid "d3a0145c-57cd-4436-9e36-323fafd41eae")
  )
  (gr_line (start 165.000 46.500) (end 165.000 101.500)
    (stroke (width 0.05) (type solid)) (layer "Edge.Cuts")
    (uuid "4fdb02b1-8c02-457c-9c78-b462568ff5e9")
  )
  (gr_line (start 165.000 101.500) (end 65.000 101.500)
    (stroke (width 0.05) (type solid)) (layer "Edge.Cuts")
    (uuid "b1f4a5fa-9e5f-4385-aec7-65658b879c09")
  )
  (gr_line (start 65.000 101.500) (end 65.000 46.500)
    (stroke (width 0.05) (type solid)) (layer "Edge.Cuts")
    (uuid "5cb17150-feda-47dd-a5fa-4275a4671901")
  )


  (gr_text "WellD  ESP32-C6 Well Monitor" (at 105.0 100.0 0) (layer "F.SilkS")
    (uuid "f3f797d0-ac5b-4c58-ada0-772bfc1aa693")
    (effects (font (size 0.8 0.8) (thickness 0.12)))
  )


  (footprint "MountingHole:MountingHole_3.2mm_M3" (layer "F.Cu") (at 68.500 50.000 0)
    (uuid "47209de7-740e-415a-b5b2-1a7a6a85018d")
    (property "Reference" "MH" (at 0 -3 0) (layer "F.SilkS")
      (uuid "7de999de-2914-4f1d-bcb5-580dc6b883a9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "MountingHole_3.2mm_M3" (at 0 3 0) (layer "F.Fab")
      (uuid "d64fed32-deb0-46ef-9d98-63f3b112b961")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2)
      (layers "*.Cu" "*.Mask")
      (uuid "2581e125-2332-416a-826f-cb7ffaeea733")
    )
  )
  (footprint "MountingHole:MountingHole_3.2mm_M3" (layer "F.Cu") (at 161.500 50.000 0)
    (uuid "90559a66-79e9-42dd-b38b-4e887f9b1ff8")
    (property "Reference" "MH" (at 0 -3 0) (layer "F.SilkS")
      (uuid "ff52def1-6751-4caa-8147-0b3aad2b6f82")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "MountingHole_3.2mm_M3" (at 0 3 0) (layer "F.Fab")
      (uuid "acb3a646-5292-41c5-91c3-eb686593302e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2)
      (layers "*.Cu" "*.Mask")
      (uuid "876b1e8e-aae8-49c4-9244-23e680c50a5a")
    )
  )
  (footprint "MountingHole:MountingHole_3.2mm_M3" (layer "F.Cu") (at 68.500 98.000 0)
    (uuid "184ec22a-3fef-4ce5-85e1-3479bb242da8")
    (property "Reference" "MH" (at 0 -3 0) (layer "F.SilkS")
      (uuid "5f7a008a-f215-4377-be70-eb4a5bbb450a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "MountingHole_3.2mm_M3" (at 0 3 0) (layer "F.Fab")
      (uuid "878665fa-e7cc-4a52-9d5f-e7f07f6d2474")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2)
      (layers "*.Cu" "*.Mask")
      (uuid "9289e6c7-9ad4-4d37-9806-c810cb7c6ab7")
    )
  )
  (footprint "MountingHole:MountingHole_3.2mm_M3" (layer "F.Cu") (at 161.500 98.000 0)
    (uuid "3099a4f5-89e1-4acd-9055-7bb702920208")
    (property "Reference" "MH" (at 0 -3 0) (layer "F.SilkS")
      (uuid "ad062c3d-de54-4b5c-ae06-060bc86c7593")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "MountingHole_3.2mm_M3" (at 0 3 0) (layer "F.Fab")
      (uuid "0a449be1-8b97-466f-bbbd-a67acd6b3887")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2)
      (layers "*.Cu" "*.Mask")
      (uuid "a237446c-9bff-4f5a-85b0-5357e71da826")
    )
  )


  (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (at 75.000 54.500 0.0)
    (uuid "73493490-04c5-5d6e-b228-3605a04c6e81")
    (property "Reference" "U7" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "d83ee114-b159-43f2-ad18-44124abcf4ee")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "CN3722" (at 0 1.5 0) (layer "F.Fab")
      (uuid "41f09723-2fa2-43d1-b39e-eb7133a2380a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/73493490-04c5-5d6e-b228-3605a04c6e81")
	(layer "F.Cu")
	(descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf)")
	(tags "SOIC SO")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.06 -2.56)
		(end 2.06 -2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 -2.465)
		(end -2.06 -2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 2.56)
		(end -2.06 2.465)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 -2.56)
		(end 2.06 -2.465)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 2.465)
		(end 2.06 2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 2.56)
		(end -2.06 2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -2.6 -2.47)
			(xy -2.84 -2.8)
			(xy -2.36 -2.8)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.7 -2.46)
		(end -2.2 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -3.7 2.46)
		(end -3.7 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 -2.7)
		(end 2.2 -2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 -2.46)
		(end -2.2 -2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 2.46)
		(end -3.7 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 2.7)
		(end -2.2 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 -2.7)
		(end 2.2 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 -2.46)
		(end 3.7 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 2.46)
		(end 2.2 2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 2.7)
		(end -2.2 2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.7 -2.46)
		(end 3.7 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.7 2.46)
		(end 2.2 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.975 -2.45)
			(xy 1.95 -2.45)
			(xy 1.95 2.45)
			(xy -1.95 2.45)
			(xy -1.95 -1.475)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "0b4a9791-2ab3-46a7-9249-bc1f597aa524")
    )
    (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "29c7b9a5-06d2-4501-99cb-248d254d4bfe")
    )
    (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "af3bfe10-59ee-4d0f-824f-2037bfd533a1")
    )
    (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e6f9e172-e4aa-4e46-8f6e-818bb3758a7b")
    )
    (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "24dd6457-229b-4aa4-9b52-4cb47f9dc979")
    )
    (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "3efbc3ce-415a-411d-94d9-ad8f356a1215")
    )
    (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "c50f6be4-5379-4c94-a74a-c1695c27bc97")
    )
    (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "4d0be928-1bb1-47dc-876e-ed418f38e0b8")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 83.000 52.500 0.0)
    (uuid "b72e2bc8-a5ba-51dd-85c2-6b3e5fc393e8")
    (property "Reference" "C17" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "60bc2210-c2fd-45dd-8c73-c72067b245e3")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "192a0298-80e7-4c5c-b655-a0f376a16f40")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/b72e2bc8-a5ba-51dd-85c2-6b3e5fc393e8")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5ce447cb-3b3c-436a-90bf-583cb2c5809d")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "eb0d8f68-104c-4d8c-96ed-ae32e39c3648")
    )
  )
  (footprint "Diode_SMD:D_SOD-123" (layer "F.Cu") (at 89.000 52.500 0.0)
    (uuid "6a97e027-d1c8-588a-b6be-490e00974784")
    (property "Reference" "D6" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "8883ce91-d798-4a1c-8c31-f025412aedec")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "MBRS140" (at 0 1.5 0) (layer "F.Fab")
      (uuid "5dc396c0-cebc-42a1-a13b-dd9f2abce57b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/6a97e027-d1c8-588a-b6be-490e00974784")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SOD-123")
	(tags "SOD-123")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.36 -1)
		(end -2.36 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "de699020-a29a-4525-a22d-28ad5ded289c")
	)
	(fp_line
		(start -2.36 -1)
		(end 1.65 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e1b647a2-f10b-41c9-a10d-290cc557cf1b")
	)
	(fp_line
		(start -2.36 1)
		(end 1.65 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bb8e1113-3a33-4b8a-8d4d-dc28453c23b3")
	)
	(fp_line
		(start -2.35 -1.15)
		(end -2.35 1.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f234f584-a276-4f4c-b983-7f290a1e5747")
	)
	(fp_line
		(start -2.35 -1.15)
		(end 2.35 -1.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4aacff46-a0e4-4a7e-adc9-4cb9bcd268bd")
	)
	(fp_line
		(start 2.35 -1.15)
		(end 2.35 1.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f57b8828-8e33-4d6a-ba4b-817e53acd1da")
	)
	(fp_line
		(start 2.35 1.15)
		(end -2.35 1.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "277b3168-086d-4feb-9ab8-026e88452a58")
	)
	(fp_line
		(start -1.4 -0.9)
		(end 1.4 -0.9)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "4ad4e92b-9b64-4eed-8c4b-d96097a88e61")
	)
	(fp_line
		(start -1.4 0.9)
		(end -1.4 -0.9)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1ac565ca-970b-44d3-9087-59b04ab60eae")
	)
	(fp_line
		(start -0.75 0)
		(end -0.35 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "46dc275b-0899-4d0d-8713-b622e0c22f0e")
	)
	(fp_line
		(start -0.35 0)
		(end -0.35 -0.55)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "9b27c55d-1944-4b36-b982-eb719a46d948")
	)
	(fp_line
		(start -0.35 0)
		(end -0.35 0.55)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "68f6cd3c-fdce-44a9-af86-78cf47501eda")
	)
	(fp_line
		(start -0.35 0)
		(end 0.25 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "e7535fdf-c98f-460e-b3e7-c5c3c78dc09f")
	)
	(fp_line
		(start 0.25 -0.4)
		(end 0.25 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "00b1df15-efaf-4389-b1a8-f9ec8af76c39")
	)
	(fp_line
		(start 0.25 0)
		(end 0.75 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "44d78e10-5c1c-4284-ba9c-163e5208ec30")
	)
	(fp_line
		(start 0.25 0.4)
		(end -0.35 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "c82b3165-5533-40f3-a703-e13e1a64873f")
	)
	(fp_line
		(start 1.4 -0.9)
		(end 1.4 0.9)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "c36e9a65-0388-45d7-9b3b-1648a22d40d4")
	)
	(fp_line
		(start 1.4 0.9)
		(end -1.4 0.9)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "3ea8d381-2884-4493-a631-0d00c072c3e5")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -2 0)
		(layer "F.Fab")
		(uuid "4ef1dce9-e176-4a2e-8fb0-c36ec2740b29")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-123.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -1.65 0.0) (size 0.9 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a9359e17-ee68-4464-ba2e-2bab56721974")
    )
    (pad "2" smd roundrect (at 1.65 0.0) (size 0.9 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "09b95316-dcc5-4d93-b8c6-f53a3a47fe35")
    )
  )
  (footprint "Diode_SMD:D_SMA" (layer "F.Cu") (at 89.000 56.500 0.0)
    (uuid "a96dd495-0946-57d3-972e-afcacfece3ac")
    (property "Reference" "D8" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "db6e0964-61d5-4706-bbcd-fb94aa0bfed2")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SMAJ28CA" (at 0 1.5 0) (layer "F.Fab")
      (uuid "29b918d3-3a02-41c5-b1b9-eff947b134a8")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/a96dd495-0946-57d3-972e-afcacfece3ac")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Diode SMA (DO-214AC)")
	(tags "Diode SMA (DO-214AC)")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.51 -1.65)
		(end -3.51 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412")
	)
	(fp_line
		(start -3.51 -1.65)
		(end 2 -1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307")
	)
	(fp_line
		(start -3.51 1.65)
		(end 2 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "dff34e10-67ca-4b77-95c8-838244782165")
	)
	(fp_line
		(start -3.5 -1.75)
		(end 3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837")
	)
	(fp_line
		(start -3.5 1.75)
		(end -3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2dd2626e-6f74-400d-9266-48b047137055")
	)
	(fp_line
		(start 3.5 -1.75)
		(end 3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4ca79e24-2e7b-47bd-871d-fec997d695df")
	)
	(fp_line
		(start 3.5 1.75)
		(end -3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d08df98a-2ea9-4491-a654-062a8028f290")
	)
	(fp_line
		(start -2.3 1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5")
	)
	(fp_line
		(start -0.64944 -0.79908)
		(end -0.64944 0.80112)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "0f99da12-e271-4d4a-8797-6ea6343d195d")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end -1.55114 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 0.75032)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d55225e2-3236-4507-bfd9-80a48f293c40")
	)
	(fp_line
		(start 0.50118 0.00102)
		(end 1.4994 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "46fe74cf-81ca-444c-a727-666d0e34a994")
	)
	(fp_line
		(start 0.50118 0.75032)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7c1208d5-7637-4920-8943-369f975b8a74")
	)
	(fp_line
		(start 2.3 -1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032")
	)
	(fp_line
		(start 2.3 -1.5)
		(end 2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d13e07f1-e4fe-4d02-b51c-871844057f50")
	)
	(fp_line
		(start 2.3 1.5)
		(end -2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f849bb85-eee3-44d9-b881-7f1627d4304a")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -2.5 0)
		(layer "F.Fab")
		(uuid "84118230-d2f4-4bb3-819b-e1cb088384b6")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "46f68357-2f7d-45f6-b010-03eeacdd7508")
    )
    (pad "2" smd roundrect (at 2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "4490a7ae-360a-450c-8765-61b6d11b7b1f")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 83.000 58.500 0.0)
    (uuid "46ec3349-ff6e-5e8a-bac7-557a645ac091")
    (property "Reference" "C18" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "262c0023-be2a-4b29-8553-f6e1dcc9e6f6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "a3e04a5e-14b1-4187-917f-4997c5a72461")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/46ec3349-ff6e-5e8a-bac7-557a645ac091")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "03142c35-7b0b-4167-bfe7-342ce46122ef")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "3713097c-2a40-4825-9929-4f32fc142463")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 75.000 60.500 0.0)
    (uuid "93473cca-9b2c-5d28-870d-718d83a1dedd")
    (property "Reference" "R19" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "53df0f12-45fb-4a74-ae32-d972e00ea921")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "2k0" (at 0 1.5 0) (layer "F.Fab")
      (uuid "26c92b61-5ab7-4f20-a6a3-58cda02ffd4e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/93473cca-9b2c-5d28-870d-718d83a1dedd")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "f70eaebb-2362-4a79-b218-d2f3368f6923")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1cc1045a-b4a7-47e0-841b-3f6597439c10")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 79.000 60.500 0.0)
    (uuid "2ef73eba-98f0-5668-b0d2-f03a7b9df714")
    (property "Reference" "R20" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "39650c11-6f22-4076-9f7f-f1f58e46deb7")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "36k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "5c708780-ba65-4e92-8ccf-1a599d7cb7d4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/2ef73eba-98f0-5668-b0d2-f03a7b9df714")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "fe332782-69bf-4657-992a-b433f85f36ac")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "19b52128-96c1-4aea-81bd-dbd8b1919cba")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 83.000 60.500 0.0)
    (uuid "77ec1e02-7131-5e50-ad0b-14189c457ee2")
    (property "Reference" "R21" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "32f9e9b6-0691-426a-9845-15877480784f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ab9ffef5-a22c-42d1-b9fc-5cf9fd2ca593")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/77ec1e02-7131-5e50-ad0b-14189c457ee2")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b202b0ea-e7cf-46c4-8725-edfd880dae74")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1239091a-ea5c-4d24-8346-be96f6c1182c")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 87.000 60.500 0.0)
    (uuid "8022fd8d-3fee-56c6-9585-eb93538b47f2")
    (property "Reference" "R33" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "c9663af7-e46e-4de7-b215-73020b5ec6b6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "604k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "e8ed6de9-298e-4597-90a1-97a4412fcb2f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/8022fd8d-3fee-56c6-9585-eb93538b47f2")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "6ecc7602-e8c4-4eeb-b88b-71fc7bd0a611")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "96f6de8c-0fcb-4373-abe0-04192593434a")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 87.000 64.500 0.0)
    (uuid "06eabbb6-4c03-5de2-ba3e-519f73a92fc2")
    (property "Reference" "R34" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "3cb367b4-92d0-4a5b-b8f8-cb8d0ff44f51")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "89f1f602-282b-4638-a032-49c88566e764")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/06eabbb6-4c03-5de2-ba3e-519f73a92fc2")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "c92e5b9f-af19-42fb-8c83-bf52f41b19af")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e83a353c-abdb-4663-a0cd-e21190d3a5d6")
    )
  )
  (footprint "LED_SMD:LED_0603_1608Metric" (layer "F.Cu") (at 71.000 56.500 0.0)
    (uuid "9e56f1a7-b936-5a3b-b50e-2c8ae3a51048")
    (property "Reference" "D7" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "33c30f1a-a4ac-438b-8c76-1a174f760eaf")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "LED" (at 0 1.5 0) (layer "F.Fab")
      (uuid "3251f5ff-da7a-4d66-83b4-818f142c3128")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/9e56f1a7-b936-5a3b-b50e-2c8ae3a51048")
	(layer "F.Cu")
	(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf)")
	(tags "LED")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.485 -0.735)
		(end -1.485 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.485 0.735)
		(end 0.8 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.8 -0.735)
		(end -1.485 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.8 -0.1)
		(end -0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.8 0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.5 -0.4)
		(end -0.8 -0.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 -0.4)
		(end -0.5 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 0.4)
		(end 0.8 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.7875 0.0) (size 0.875 0.95)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "d43461af-0275-417f-9dd2-51e0f49abb00")
    )
    (pad "2" smd roundrect (at 0.7875 0.0) (size 0.875 0.95)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "90e38770-d004-4258-ba3f-71eadd57d87f")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 71.000 60.500 0.0)
    (uuid "ab4baae5-2f14-543d-95b0-7ad380a0d672")
    (property "Reference" "R22" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "62fb2551-172e-4af7-9bb4-47e87dfb0ff4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1k DNF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "be2231ff-ea0b-4add-8b80-1893986f2d62")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/ab4baae5-2f14-543d-95b0-7ad380a0d672")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5cc12c53-3194-4f35-b8bd-5467bdfb55d1")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "217a55f5-8a1a-417c-8eac-b3444fe93e85")
    )
  )
  (footprint "Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal" (layer "F.Cu") (at 69.000 72.500 180.0)
    (uuid "dbd46cd5-2ef9-5138-b757-dd14e9f87605")
    (property "Reference" "J13" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "b87f9f0c-bb7c-4827-ae45-7c186ae234ba")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "USB-C" (at 0 1.5 0) (layer "F.Fab")
      (uuid "669cbf47-dba9-4e8f-835d-cf823a9474bc")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/dbd46cd5-2ef9-5138-b757-dd14e9f87605")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "USB Type C Receptacle, GCT, power-only, 6P, top mounted, horizontal, 3A: https://gct.co/files/drawings/usb4135.pdf")
	(tags "USB C Type-C Receptacle SMD USB Power-only Charging-only 6P 6C USB4135-GF-A")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -4.6 -2.04)
		(end -4.6 -0.41)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "f8491470-cd56-44f1-9907-526385bab548")
	)
	(fp_line
		(start 4.6 -2.04)
		(end 4.6 -0.41)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "7b2bcab6-d2e4-44c3-8ef7-856da736ae33")
	)
	(fp_line
		(start -4.75 3.4525)
		(end 4.75 3.4525)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "Dwgs.User")
		(uuid "ac3706a5-d00f-4a2b-b553-845537f84ef0")
	)
	(fp_line
		(start -6.55 -4.2)
		(end -6.55 -1.8)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "35aa38c2-e04b-48a5-ac2b-72d96bfa6e86")
	)
	(fp_line
		(start -6.55 -1.8)
		(end -5 -1.8)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "1b875ae7-423e-440e-be16-bad792537f6d")
	)
	(fp_line
		(start -6.55 -0.65)
		(end -6.55 1.9)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "3d520551-40c0-48a6-9654-96699a1baf60")
	)
	(fp_line
		(start -5 -1.8)
		(end -5 -0.65)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "7b477b16-392d-4fa6-8ffe-9adf0f7df555")
	)
	(fp_line
		(start -5 -0.65)
		(end -6.55 -0.65)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "e0ae7aa5-f4cd-45b9-957c-8922f0f24474")
	)
	(fp_line
		(start -5 1.9)
		(end -6.55 1.9)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "127a5d55-b9b7-4901-a3b9-1725cfb763c5")
	)
	(fp_line
		(start -5 1.9)
		(end -5 4)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "72aca6a1-d261-4283-9e68-826e5d3bb681")
	)
	(fp_line
		(start -5 4)
		(end 5 4)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "1b0a0972-4aeb-4fcc-a920-9183a747bdbe")
	)
	(fp_line
		(start 5 -1.8)
		(end 5 -0.65)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d481d6db-4ed6-40b1-8bf9-b3b0071f4243")
	)
	(fp_line
		(start 5 -1.8)
		(end 6.55 -1.8)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "a3853817-13c1-41f3-bfda-0e4ae522d98c")
	)
	(fp_line
		(start 5 1.9)
		(end 5 4)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "fad20376-1883-4dbc-89c7-e305dbb3fd62")
	)
	(fp_line
		(start 6.55 -4.2)
		(end -6.55 -4.2)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "0316b420-503b-48ad-816d-d8f3f8fafda7")
	)
	(fp_line
		(start 6.55 -4.2)
		(end 6.55 -1.8)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "efcdbd4b-542f-43f1-beff-fd9d12dc71e7")
	)
	(fp_line
		(start 6.55 -0.65)
		(end 5 -0.65)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "6f8d0900-1bc2-48be-bd3d-0220ded59198")
	)
	(fp_line
		(start 6.55 -0.65)
		(end 6.55 1.9)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "8914e587-1375-4d90-86bf-e5edf429e332")
	)
	(fp_line
		(start 6.55 1.9)
		(end 5 1.9)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "975e8ec2-965d-4dc9-897c-818fc4af7a29")
	)
	(fp_rect
		(start -4.47 -3.4525)
		(end 4.47 3.4525)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
		(uuid "82ddcd73-4545-43a2-846d-a184cb19430a")
	)
	(fp_text user "PCB Edge"
		(at 0 2.9 0)
		(unlocked yes)
		(layer "Dwgs.User")
		(uuid "8cf83ac4-a58d-4cf8-92c0-9644e0e97e9d")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.1)
			)
		)
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(uuid "30ded676-1509-4238-8e47-7ba002d943c0")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_USB.3dshapes/USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "A5" smd roundrect (at -0.5 -3.0325) (size 0.7 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5f34fcf1-3623-4ef5-994c-bdbf876d0720")
    )
    (pad "A9" smd roundrect (at 1.52 -3.0325 180.0) (size 0.76 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ae2799e2-8d8d-41f6-9a35-1bb4685209dc")
    )
    (pad "A12" smd roundrect (at 2.75 -3.0325 180.0) (size 0.8 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b85e3ef3-6f41-465e-b821-1fb0d2a39b36")
    )
    (pad "B5" smd roundrect (at 0.5 -3.0325 180.0) (size 0.7 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "781f1842-e0ba-4e6c-a84f-fd496332d080")
    )
    (pad "B9" smd roundrect (at -1.52 -3.0325) (size 0.76 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ed205258-7226-455c-afef-400840cee999")
    )
    (pad "B12" smd roundrect (at -2.75 -3.0325) (size 0.8 1.2)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "07d21893-554f-4316-8cf6-0cc9edaa63ad")
    )
    (pad "SH" smd roundrect (at -5.125 -2.9775) (size 1.8 1.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "c279b903-6ef0-4901-888f-dae90318ad5c")
    )
    (pad "SH" smd roundrect (at -5.125 0.6025) (size 1.8 1.5)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5142faad-a34c-4b05-a5b0-c0e0134da72c")
    )
    (pad "SH" smd roundrect (at 5.125 -2.9775) (size 1.8 1.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b9edf25b-9304-4b4a-b990-7e44773fee9f")
    )
    (pad "SH" smd roundrect (at 5.125 0.6025) (size 1.8 1.5)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "43a9c0f1-6e0d-4363-9479-f85c3c304bad")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 79.000 70.500 0.0)
    (uuid "55c341cf-e7b8-5c0d-a747-31270a995297")
    (property "Reference" "R50" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "84dc6e55-e3e2-4180-8eac-abd940c19c6b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "5k1" (at 0 1.5 0) (layer "F.Fab")
      (uuid "47ea8490-ddac-48b2-8240-3959f2a7dfd9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/55c341cf-e7b8-5c0d-a747-31270a995297")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "308fe2d9-1684-4226-88cf-2460a201bc04")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5fb2d1c7-7c71-4c38-8c56-96ebf8824600")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 79.000 74.500 0.0)
    (uuid "504e72ab-9c47-58bd-a526-4c6fdf9a2b43")
    (property "Reference" "R51" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "84d01ee5-1306-41da-a1a5-bd5284b74200")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "5k1" (at 0 1.5 0) (layer "F.Fab")
      (uuid "4d24889b-a6ab-4a09-bba1-3083129c8183")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/504e72ab-9c47-58bd-a526-4c6fdf9a2b43")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "809b82d4-58c7-4439-92cd-5446a3d86872")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a62930de-8858-4467-881e-ba950c0c9b94")
    )
  )
  (footprint "Package_TO_SOT_SMD:SOT-23-6" (layer "F.Cu") (at 85.000 70.500 0.0)
    (uuid "59b492ef-5394-5b67-8368-4b1041d3aee0")
    (property "Reference" "U11" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "a5bec5e1-8101-45c1-9fa5-0da7aa7edc5a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "USBLC6" (at 0 1.5 0) (layer "F.Fab")
      (uuid "43cfc652-1f26-424e-a759-66d1df160833")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/59b492ef-5394-5b67-8368-4b1041d3aee0")
	(layer "F.Cu")
	(descr "SOT, 6 Pin (JEDEC MO-178 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-178)")
	(tags "SOT TO_SOT_SMD")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.91 -1.56)
		(end 0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 -1.51)
		(end -0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 1.56)
		(end -0.91 1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 -1.56)
		(end 0.91 -1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.51)
		(end 0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.56)
		(end -0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.45 -1.51)
			(xy -1.69 -1.84)
			(xy -1.21 -1.84)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.05 -1.5)
		(end -1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.05 1.5)
		(end -2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.7)
		(end 1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.5)
		(end -1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.5)
		(end -2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.7)
		(end -1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.7)
		(end 1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.5)
		(end 2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.5)
		(end 1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.7)
		(end -1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 -1.5)
		(end 2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 1.5)
		(end 1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.4 -1.45)
			(xy 0.8 -1.45)
			(xy 0.8 1.45)
			(xy -0.8 1.45)
			(xy -0.8 -1.05)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.72 0.72)
				(thickness 0.11)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -1.1375 -0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b33ba3c3-e5e2-4c37-bb7d-ee427c0d96b2")
    )
    (pad "2" smd roundrect (at -1.1375 0.0) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "4a0a1253-d7f2-47b9-a6a3-3bd9c2fb1eaf")
    )
    (pad "3" smd roundrect (at -1.1375 0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "f0223dfe-d581-431d-ae85-509915aa74cc")
    )
    (pad "4" smd roundrect (at 1.1375 0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "09fa6ee8-26cc-4591-b127-4ba1b3b45e95")
    )
    (pad "5" smd roundrect (at 1.1375 0.0) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "726ea627-5de9-4508-9849-ed396c91be76")
    )
    (pad "6" smd roundrect (at 1.1375 -0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7617acba-6a10-414f-a378-9424072efa3f")
    )
  )
  (footprint "Fuse:Fuse_1206_3216Metric" (layer "F.Cu") (at 91.000 70.500 0.0)
    (uuid "511ab892-c57e-5c25-bf70-795179fbd722")
    (property "Reference" "F2" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "37ede6ed-6fb2-4ca0-86ba-6bdab47d88c6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "Polyfuse" (at 0 1.5 0) (layer "F.Fab")
      (uuid "449a6bd9-6203-445f-90ab-b3c2ef0e8dd6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/511ab892-c57e-5c25-bf70-795179fbd722")
	(layer "F.Cu")
	(descr "Fuse SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf)")
	(tags "fuse")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.602064 -0.91)
		(end 0.602064 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.602064 0.91)
		(end 0.602064 0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.28 -1.13)
		(end 2.28 1.13)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1.6 -0.8)
		(end 1.6 0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.8 0.8)
				(thickness 0.12)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Fuse.3dshapes/Fuse_1206_3216Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -1.4 0.0) (size 1.25 1.75)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a2188477-84ed-40b8-b900-2f25eff3c94a")
    )
    (pad "2" smd roundrect (at 1.4 0.0) (size 1.25 1.75)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "54e57b90-9537-4ae2-b6fd-60a3a3fe81c5")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 91.000 66.500 0.0)
    (uuid "b5061750-66b8-5da8-99ac-a3128fe10897")
    (property "Reference" "C27" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "c7cb33ac-ae62-426c-a31b-bcfc35d2939d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4.7uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ed78430d-5bfd-4623-9adf-cbb7c5af46dd")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/b5061750-66b8-5da8-99ac-a3128fe10897")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ecfed41e-e5a2-4c70-aaeb-983775c02bbd")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a7644d07-a511-43b5-b401-4b4e8c83f910")
    )
  )
  (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") (at 85.000 86.500 0.0)
    (uuid "81020c9e-7f39-5e31-82f7-ca1e86083962")
    (property "Reference" "U12" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "5dd6837b-86a6-481e-992b-eee8263293da")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "TP5100" (at 0 1.5 0) (layer "F.Fab")
      (uuid "45c6c064-f82a-4490-9f15-f37b217e5769")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/81020c9e-7f39-5e31-82f7-ca1e86083962")
	(layer "F.Cu")
	(descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf)")
	(tags "SOIC SO")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2.06 -2.56)
		(end 2.06 -2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 -2.465)
		(end -2.06 -2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.06 2.56)
		(end -2.06 2.465)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 -2.56)
		(end 2.06 -2.465)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 2.465)
		(end 2.06 2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 2.06 2.56)
		(end -2.06 2.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -2.6 -2.47)
			(xy -2.84 -2.8)
			(xy -2.36 -2.8)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.7 -2.46)
		(end -2.2 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -3.7 2.46)
		(end -3.7 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 -2.7)
		(end 2.2 -2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 -2.46)
		(end -2.2 -2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 2.46)
		(end -3.7 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.2 2.7)
		(end -2.2 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 -2.7)
		(end 2.2 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 -2.46)
		(end 3.7 -2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 2.46)
		(end 2.2 2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.2 2.7)
		(end -2.2 2.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.7 -2.46)
		(end 3.7 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.7 2.46)
		(end 2.2 2.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.975 -2.45)
			(xy 1.95 -2.45)
			(xy 1.95 2.45)
			(xy -1.95 2.45)
			(xy -1.95 -1.475)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.475 -1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "eda1b00e-eed3-4aca-a5b1-19818819df69")
    )
    (pad "2" smd roundrect (at -2.475 -0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "2d11fd06-b31b-4c0e-ad87-9cfbe50115e8")
    )
    (pad "3" smd roundrect (at -2.475 0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "50b035ac-cd34-4e52-b2be-afb6acd0e1b9")
    )
    (pad "4" smd roundrect (at -2.475 1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8c541e47-6f22-43ba-b3c6-fbc63e0e3170")
    )
    (pad "5" smd roundrect (at 2.475 1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a1c40efa-a278-43ef-a799-6355c4d2b84f")
    )
    (pad "6" smd roundrect (at 2.475 0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e7bda14a-e564-4b34-b44d-561266c1ce0d")
    )
    (pad "7" smd roundrect (at 2.475 -0.635) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b2d2b7c2-ce8a-4b16-a397-7b3913342a84")
    )
    (pad "8" smd roundrect (at 2.475 -1.905) (size 1.95 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "580e4dd7-5f3b-40f9-8a56-50aa365f8a79")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 93.000 84.500 0.0)
    (uuid "10f4acef-d8e5-5941-8d76-8b652cae9c95")
    (property "Reference" "C28" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "545aa6c5-861e-440d-80c9-adf6e47a1500")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "077ad5f2-6b3a-49b0-9396-2d2e3562fbe0")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/10f4acef-d8e5-5941-8d76-8b652cae9c95")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e13cb313-312e-40ca-b107-79c508cc06f1")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7d1bb426-e256-41ca-8451-c2b912bd85bc")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 93.000 88.500 0.0)
    (uuid "6eff6794-d97e-5bbf-8953-b5975528d124")
    (property "Reference" "C29" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "9732ed0c-de68-4e8a-be8f-e584453663f9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "d10e93fa-4cfe-49cb-bed9-62d37db78df1")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/6eff6794-d97e-5bbf-8953-b5975528d124")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "abf548fe-6e1e-4ca2-ae4c-073cfeda7f5c")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "f3e359d4-922b-4807-b068-5dd1f33fd7c2")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 79.000 80.500 0.0)
    (uuid "4625b7db-8865-55e6-85ce-2bfa79612573")
    (property "Reference" "R35" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "e91b87c8-e89e-4aad-8e6e-bab9e5e86b30")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1k2" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f03f503d-437e-4743-8901-a14d402b7862")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/4625b7db-8865-55e6-85ce-2bfa79612573")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a2b1d519-da1d-4b44-9ed3-95b3c9bf8c8c")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5c1b3e41-ff1b-48ca-91b4-5b7f1018847e")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 79.000 82.500 0.0)
    (uuid "5fcff6cc-bbb6-584a-a6ff-2242efbe225b")
    (property "Reference" "R36" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "ce02a5d5-b70c-4b5a-bb1d-c2f6e235e12e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "eb2b778d-8ec3-4717-900f-89075ed61f66")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/5fcff6cc-bbb6-584a-a6ff-2242efbe225b")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "db8fbc37-3d07-46c0-91ff-5e1011c1b372")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "fe7fe11b-bf85-4dcf-a977-2788fd5a0c73")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 79.000 84.500 0.0)
    (uuid "ee722f2f-115d-5c28-9005-01389c96be92")
    (property "Reference" "R37" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "4d4d2f1a-c5ef-4904-9afd-d1e67fe3347c")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4k7" (at 0 1.5 0) (layer "F.Fab")
      (uuid "e9f680a6-bd83-4aac-bd40-18c1a4e05095")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/ee722f2f-115d-5c28-9005-01389c96be92")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a14b072c-edbb-4d12-9184-5aa0c21c2e22")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "02014497-a2ab-46ce-a74e-c8a5a0dc21a9")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 87.000 82.500 0.0)
    (uuid "14e217c4-d9e6-5638-aa1e-628d8e9df946")
    (property "Reference" "R38" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "7bd0dd85-6e3c-4de9-a028-13dc46a0c3c8")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4k7" (at 0 1.5 0) (layer "F.Fab")
      (uuid "56d72b7a-af8b-4681-a729-01d544bcb11f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/14e217c4-d9e6-5638-aa1e-628d8e9df946")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "41a4e56c-6da3-491f-9014-e5d70382cfea")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "bec001e9-3e8a-48f0-8fa3-d45158942b54")
    )
  )
  (footprint "Diode_SMD:D_SMA" (layer "F.Cu") (at 73.000 84.500 0.0)
    (uuid "a583a4fd-7728-5cf3-a545-b7e606e32109")
    (property "Reference" "D13" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "276200f8-198d-40c2-b1ee-36a6eac71c11")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SMAJ10CA" (at 0 1.5 0) (layer "F.Fab")
      (uuid "9ed33ab0-af20-4828-bf61-67269e872fab")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/a583a4fd-7728-5cf3-a545-b7e606e32109")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Diode SMA (DO-214AC)")
	(tags "Diode SMA (DO-214AC)")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.51 -1.65)
		(end -3.51 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412")
	)
	(fp_line
		(start -3.51 -1.65)
		(end 2 -1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307")
	)
	(fp_line
		(start -3.51 1.65)
		(end 2 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "dff34e10-67ca-4b77-95c8-838244782165")
	)
	(fp_line
		(start -3.5 -1.75)
		(end 3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837")
	)
	(fp_line
		(start -3.5 1.75)
		(end -3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2dd2626e-6f74-400d-9266-48b047137055")
	)
	(fp_line
		(start 3.5 -1.75)
		(end 3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4ca79e24-2e7b-47bd-871d-fec997d695df")
	)
	(fp_line
		(start 3.5 1.75)
		(end -3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d08df98a-2ea9-4491-a654-062a8028f290")
	)
	(fp_line
		(start -2.3 1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5")
	)
	(fp_line
		(start -0.64944 -0.79908)
		(end -0.64944 0.80112)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "0f99da12-e271-4d4a-8797-6ea6343d195d")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end -1.55114 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 0.75032)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d55225e2-3236-4507-bfd9-80a48f293c40")
	)
	(fp_line
		(start 0.50118 0.00102)
		(end 1.4994 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "46fe74cf-81ca-444c-a727-666d0e34a994")
	)
	(fp_line
		(start 0.50118 0.75032)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7c1208d5-7637-4920-8943-369f975b8a74")
	)
	(fp_line
		(start 2.3 -1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032")
	)
	(fp_line
		(start 2.3 -1.5)
		(end 2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d13e07f1-e4fe-4d02-b51c-871844057f50")
	)
	(fp_line
		(start 2.3 1.5)
		(end -2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f849bb85-eee3-44d9-b881-7f1627d4304a")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -2.5 0)
		(layer "F.Fab")
		(uuid "84118230-d2f4-4bb3-819b-e1cb088384b6")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "cf1ac5ab-bd07-45db-b839-562073fbab04")
    )
    (pad "2" smd roundrect (at 2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ec12c31a-2146-4f06-8f1a-0eceef73acef")
    )
  )
  (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (at 69.000 80.500 0.0)
    (uuid "7512c78a-fe19-5c85-a27c-d8f927ac698a")
    (property "Reference" "D5" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "0b56ed16-339b-4203-96d9-658a775e2611")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "AO3407" (at 0 1.5 0) (layer "F.Fab")
      (uuid "9091ef87-e03d-4e4b-8622-1684a3372ad5")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/7512c78a-fe19-5c85-a27c-d8f927ac698a")
	(layer "F.Cu")
	(descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236)")
	(tags "SOT TO_SOT_SMD")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.76 -1.56)
		(end 0.76 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.76 -1.51)
		(end -0.76 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.76 0.39)
		(end -0.76 -0.39)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.76 1.56)
		(end -0.76 1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.76 -1.56)
		(end 0.76 -0.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.76 0.56)
		(end 0.76 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.76 1.56)
		(end -0.76 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.3 -0.38)
			(xy -1.06 -0.05)
			(xy -1.54 -0.05)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.93 -1.5)
		(end -0.9 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.93 -0.39)
		(end -1.93 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.93 0.39)
		(end -0.9 0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.93 1.5)
		(end -1.93 0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 -1.7)
		(end 0.9 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 -1.5)
		(end -0.9 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 -0.39)
		(end -1.93 -0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 0.39)
		(end -0.9 -0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 1.5)
		(end -1.93 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 1.7)
		(end -0.9 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 -1.7)
		(end 0.9 -0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 -0.55)
		(end 1.93 -0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 0.55)
		(end 0.9 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 1.7)
		(end -0.9 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.93 -0.55)
		(end 1.93 0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.93 0.55)
		(end 0.9 0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.325 -1.45)
			(xy 0.65 -1.45)
			(xy 0.65 1.45)
			(xy -0.65 1.45)
			(xy -0.65 -1.125)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.72 0.72)
				(thickness 0.11)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "0fc668ce-9a61-460c-87a7-a6708a08bcc3")
    )
    (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "aa6ec512-d773-4a63-a21b-148592c9ce97")
    )
    (pad "3" smd roundrect (at 0.9375 0.0) (size 1.475 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1d62e9b0-014d-4b02-bac7-8c50b6f658b2")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 69.000 84.500 0.0)
    (uuid "6b88bd5e-f8be-5d92-b0fa-fdfd085243d9")
    (property "Reference" "R31" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "caf80c3c-a017-418a-95f5-fc0ccddb8312")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "eb7cd287-0fae-44ac-b511-baad857041ef")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/6b88bd5e-f8be-5d92-b0fa-fdfd085243d9")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "2732a8ff-1d7b-45e5-84fa-6ec243891887")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "63d14461-7beb-4b5d-97f4-d2e7bcd64ccd")
    )
  )
  (footprint "Package_TO_SOT_SMD:SOT-23-6" (layer "F.Cu") (at 79.000 76.500 0.0)
    (uuid "543061d9-871c-5a7f-8f9f-83060d7c7a6a")
    (property "Reference" "U1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "5a287039-2de5-486f-8977-c3696115aa15")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "AP63205" (at 0 1.5 0) (layer "F.Fab")
      (uuid "c2acdcbd-d927-4049-b372-ff80a5a9b474")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/543061d9-871c-5a7f-8f9f-83060d7c7a6a")
	(layer "F.Cu")
	(descr "SOT, 6 Pin (JEDEC MO-178 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-178)")
	(tags "SOT TO_SOT_SMD")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.91 -1.56)
		(end 0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 -1.51)
		(end -0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 1.56)
		(end -0.91 1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 -1.56)
		(end 0.91 -1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.51)
		(end 0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.56)
		(end -0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.45 -1.51)
			(xy -1.69 -1.84)
			(xy -1.21 -1.84)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.05 -1.5)
		(end -1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.05 1.5)
		(end -2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.7)
		(end 1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.5)
		(end -1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.5)
		(end -2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.7)
		(end -1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.7)
		(end 1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.5)
		(end 2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.5)
		(end 1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.7)
		(end -1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 -1.5)
		(end 2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 1.5)
		(end 1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.4 -1.45)
			(xy 0.8 -1.45)
			(xy 0.8 1.45)
			(xy -0.8 1.45)
			(xy -0.8 -1.05)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.72 0.72)
				(thickness 0.11)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -1.1375 -0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "2d032085-5b25-41e0-a43f-3141acbb3531")
    )
    (pad "2" smd roundrect (at -1.1375 0.0) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "fe750211-d094-44c0-8549-f30055fa38b7")
    )
    (pad "3" smd roundrect (at -1.1375 0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "067b6d0c-2fcd-4b02-9329-7901b12a2c97")
    )
    (pad "4" smd roundrect (at 1.1375 0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "19a425eb-6e4c-4ed5-937c-58b8432ac365")
    )
    (pad "5" smd roundrect (at 1.1375 0.0) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "19726bd8-0e00-4fea-b4aa-c4eca3bff016")
    )
    (pad "6" smd roundrect (at 1.1375 -0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7b378304-4c1c-46d8-9d1c-b0a88424427e")
    )
  )
  (footprint "Inductor_SMD:L_Vishay_IFSC-1515AH_4x4x1.8mm" (layer "F.Cu") (at 87.000 76.500 0.0)
    (uuid "01e05bac-58d0-5d9c-a916-d7f33cdf93d8")
    (property "Reference" "L2" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "88a7e45e-8a5a-4ee4-8518-5c34bf212bd4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4.7uH" (at 0 1.5 0) (layer "F.Fab")
      (uuid "cb90c113-fd76-4651-9c27-c8bd8b343aa8")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/01e05bac-58d0-5d9c-a916-d7f33cdf93d8")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Low Profile, High Current Inductors (https://www.vishay.com/docs/34295/sc15ah01.pdf)")
	(tags "SMD Vishay Inductor Low Profile")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2 -2.11)
		(end 2 -2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "3641bd9d-7052-4933-ba16-f7829994b97c")
	)
	(fp_line
		(start 2 2.11)
		(end -2 2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e67a83b1-c647-4e1c-866c-8945e1f18e79")
	)
	(fp_line
		(start -2.3 -2.25)
		(end 2.3 -2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4e5e5174-143b-4c40-bdb7-f45f296081cc")
	)
	(fp_line
		(start -2.3 2.25)
		(end -2.3 -2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "ab0a312a-050c-4a06-b493-354f1b4b0c81")
	)
	(fp_line
		(start 2.3 -2.25)
		(end 2.3 2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "fa46bf01-6a9a-4eda-a72d-aeb511326cce")
	)
	(fp_line
		(start 2.3 2.25)
		(end -2.3 2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "ad97d90e-999e-4e0f-bd58-ad5103fa727f")
	)
	(fp_line
		(start -2 -2)
		(end 2 -2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "351df620-9e2c-46fc-a4ad-3ebbd3efdbad")
	)
	(fp_line
		(start -2 -1.115)
		(end -1.115 -2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "a2585e62-ebd1-4337-88f9-fb40204e8bef")
	)
	(fp_line
		(start -2 2)
		(end -2 -2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "b28cf22f-7d98-47b9-a0ef-cb03c68fc1c7")
	)
	(fp_line
		(start -1.115 2)
		(end -2 1.115)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "5e4635e0-defc-4101-8c2a-55c53010a913")
	)
	(fp_line
		(start 1.115 -2)
		(end 2 -1.115)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1b219655-b0cd-4354-a81c-bf24d2b65dcc")
	)
	(fp_line
		(start 2 -2)
		(end 2 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "ef406bd3-f1a5-4ce0-9156-c8260da74438")
	)
	(fp_line
		(start 2 1.115)
		(end 1.115 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "da55b495-73e7-40f2-b0fa-8c6ff2d9e4f2")
	)
	(fp_line
		(start 2 2)
		(end -2 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "6f63711e-4ac7-4269-9110-ec6510063c7b")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "4c5bca5f-c8a7-4598-a817-c9e28462ef5a")
		(effects
			(font
				(size 0.8 0.8)
				(thickness 0.12)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_Vishay_IFSC-1515AH_4x4x1.8mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd rect (at -1.475 0.0) (size 1.15 3.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ca3c4b92-c6d7-4827-9220-f6b910b79cb1")
    )
    (pad "2" smd rect (at 1.475 0.0) (size 1.15 3.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "3c9d9e58-f92e-468f-83c3-d2eccd23b80c")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 75.000 78.500 0.0)
    (uuid "a7a941f9-97b1-5a85-90e6-fb4dc8a51237")
    (property "Reference" "C9" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "b1850683-acc7-47cd-a5d9-08928ba0e718")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "fb4d43a1-a73c-4d07-8811-169ecc66f248")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/a7a941f9-97b1-5a85-90e6-fb4dc8a51237")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "3141a927-cddc-43c8-9d89-c17413494428")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "81bc6dd5-0daa-4df3-9b0b-9fff6c8aee4a")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 79.000 78.500 0.0)
    (uuid "87c7b90c-7958-5fb5-9dde-c0d4dfaa235c")
    (property "Reference" "C10" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "1ebfb2c0-878e-44c8-9d23-2c9635ef2b75")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "313caa9f-2695-4ddf-81ae-28f201ae45a7")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/87c7b90c-7958-5fb5-9dde-c0d4dfaa235c")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "2f4085db-1b88-4c10-aa6e-620f62c75540")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "69e9eeb1-8609-410c-979b-229b9e87aee7")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 87.000 78.500 0.0)
    (uuid "8a759d57-9b49-5e64-a560-e83d0a3113fc")
    (property "Reference" "C11" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "ee7f90cb-a076-4151-aff5-e7a90d306cf5")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "6e9397dc-aeb4-4b38-8733-1f0234056272")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/8a759d57-9b49-5e64-a560-e83d0a3113fc")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "397f3acd-15d6-4a4e-b23f-bba9f63a1109")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "0c3349c8-608c-4702-acc6-e250fcf4a61c")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 91.000 78.500 0.0)
    (uuid "37252d2a-4697-54e9-bddb-cfaa98f22112")
    (property "Reference" "C12" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "2e55962a-17b2-481f-b040-acefb141e8ed")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "881adab6-c792-4b70-8813-c280c596761d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/37252d2a-4697-54e9-bddb-cfaa98f22112")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "92f1d056-61f6-48b2-a531-d22ad5443ff2")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ac8ae641-6938-4b24-8a17-0c66abf59455")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 91.000 74.500 0.0)
    (uuid "1477eeeb-b6ed-59a8-a57b-11544753c713")
    (property "Reference" "C16" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "68962310-9758-4a67-b396-d2e1326b6ac6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "33aba6ba-f3f1-404a-927e-7692f9153b5a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/1477eeeb-b6ed-59a8-a57b-11544753c713")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "428b05d1-7772-4ce9-8b52-5c12e3d6ecdc")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "841a5d21-4155-419b-b813-72cabe86e0a2")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 83.000 78.500 0.0)
    (uuid "c2aaf93b-91f6-56a9-914a-888cac332fff")
    (property "Reference" "R11" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "4c05f75d-4dd9-49ea-88a5-1b95a0d36a00")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "e4c230f3-3342-4ee9-a34f-0f7231a9a15c")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/c2aaf93b-91f6-56a9-914a-888cac332fff")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e4d72e9b-86fd-4222-a96d-755b66eb8abb")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "73e6e32b-344e-434f-be46-affc446e158b")
    )
  )
  (footprint "WellD:XT30PW-F_RightAngle" (layer "F.Cu") (at 69.000 92.500 270.0)
    (uuid "c61e43f0-7b2b-5f13-9b1b-9802fe7da0fb")
    (property "Reference" "J1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "adcc7aca-f143-4e84-9243-c1241dce0510")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "XT30PW-F" (at 0 1.5 0) (layer "F.Fab")
      (uuid "7da4ed43-7519-4c66-a339-ef501f8371ac")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/c61e43f0-7b2b-5f13-9b1b-9802fe7da0fb")

    (pad "1" thru_hole rect (at -2.5 10.0) (size 2.55 2.55) (drill 1.8)
      (layers "*.Cu" "*.Mask")
      (uuid "6822d9a6-a00f-4468-9c51-5a53fc0ac4a7")
    )
    (pad "2" thru_hole circle (at 2.5 10.0) (size 2.55 2.55) (drill 1.8)
      (layers "*.Cu" "*.Mask")
      (uuid "6401f543-7f8d-419f-b66f-281e894de598")
    )
    (pad "S1" thru_hole circle (at 5.5 0.0) (size 1.508 1.508) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "adb69488-2768-4e93-b16d-98a3d94fea17")
    )
    (pad "S2" thru_hole circle (at -5.5 0.0) (size 1.508 1.508) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "896f0fbf-44ad-4b2a-ad21-1b379bb10a0d")
    )
  )
  (footprint "Espressif:ESP32-C6-MINI-1U" (layer "F.Cu") (at 113.000 62.500 0.0)
    (uuid "283b7a6d-c4d6-5f5b-9a1e-e5c64504da60")
    (property "Reference" "U6" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "2bda30cd-0ac0-4482-9e2f-e6a5637dbcc0")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "ESP32-C6" (at 0 1.5 0) (layer "F.Fab")
      (uuid "9e8dd2f1-43c1-48bc-b85d-3072271a8e36")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/283b7a6d-c4d6-5f5b-9a1e-e5c64504da60")
  (layer "F.Cu")
  (descr "ESP32-C6-MINI-1U: https://www.espressif.com/sites/default/files/documentation/esp32-c6-mini-1_datasheet_en.pdf")
  (tags "ESP32-C6")
  (attr smd)
  (fp_text reference "REF**" (at 0 -5.1) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.15)))
    (tstamp 4c5af0f2-7fc3-4677-bcf0-475348ea289e)
  )
  (fp_text value "ESP32-C6-MINI-1U" (at 0 9.85) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
    (tstamp 52790a6a-7ba1-4e85-ad9f-2aaea68a8829)
  )
  (fp_text user "${REFERENCE}" (at 0 2.7) (layer "F.Fab")
      (effects (font (size 1 1) (thickness 0.15)))
    (tstamp acb413d0-4ad8-4a42-abc7-30a25a2bfe60)
  )
  (fp_line (start -6.8 7.7) (end -6.8 8.5)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 341059b3-16ac-4fe8-bbe2-921988ba1654))
  (fp_line (start -6.8 8.5) (end -6 8.5)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ead511cf-663a-4357-938d-081298c43105))
  (fp_line (start -6.6 -4.2) (end 6.6 -4.2)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d32cc096-740c-442c-84ac-39c08c94919c))
  (fp_line (start -6.6 8.3) (end -6.6 -4.2)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ac3e7469-dad1-4aeb-afc7-66de12c1386f))
  (fp_line (start -5.925 -4.4) (end -6.775 -4.4)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 01eb9bdd-a337-4673-a2b0-d209aebe8932))
  (fp_line (start 6.025 -4.4) (end 6.775 -4.4)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e79c0d1b-dd57-46f8-829a-f7a4352235f8))
  (fp_line (start 6.6 -4.2) (end 6.6 8.3)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp c8dca1a6-f09a-4305-804d-2295b5448f55))
  (fp_line (start 6.6 8.3) (end -6.6 8.3)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp fa75329b-3cd9-4e19-b5e0-98e35d8ab95d))
  (fp_line (start 6.8 -4.4) (end 6.8 -3.8)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 66154fb2-7455-4e42-b0a7-e0fdebb40a4a))
  (fp_line (start 6.8 7.7) (end 6.8 8.5)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 34577da5-8540-4885-bbc3-ada672c1ed01))
  (fp_line (start 6.8 8.5) (end 6 8.5)
    (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e08202b4-b54c-47dc-abd9-41790b010f3d))
  (fp_line (start -6.8 -4.4) (end 6.8 -4.4)
    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4dec140a-3f2f-4b17-b6f0-89a0fc1cf30b))
  (fp_line (start -6.8 8.5) (end -6.8 -4.4)
    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2fea9376-e64b-4ea0-a2be-bfafcd0c9189))
  (fp_line (start 6.8 -4.4) (end 6.8 8.5)
    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a3887266-68b0-4dd7-9a5c-d536fac04d37))
  (fp_line (start 6.8 8.5) (end -6.8 8.5)
    (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 43971745-6f64-41b9-8a4b-ceb1b9580218))
  (fp_line (start -6.6 8.3) (end -6.6 -4.2)
    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9e12aa45-f15b-4c29-be3e-fcc92d0c89a6))
  (fp_line (start -6.6 8.3) (end 6.6 8.3)
    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7c840cf2-18c2-4b5e-9d18-7773de25b900))
  (fp_line (start -5.8 -4.2) (end -6.6 -3.4)
    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a403151e-e6cf-4db5-b24f-78cb4c9d3648))
  (fp_line (start 6.6 -4.2) (end -6.6 -4.2)
    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0ff62544-fbff-4de2-bbd5-b3049afe4eaa))
  (fp_line (start 6.6 8.3) (end 6.6 -4.2)
    (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 90dc646b-1260-4819-b979-749c6156871c))
    (pad "1" smd rect (at -5.9 -1.3 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "0ae5506f-ad10-4cd6-9fa4-d73260fdc244")
    )
    (pad "2" smd rect (at -5.9 -0.5 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "f742068e-4559-473b-b459-b45fde13a990")
    )
    (pad "3" smd rect (at -5.9 0.3 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "713e6bd5-8c5b-4497-b1d3-a7c5d717fdf7")
    )
    (pad "4" smd rect (at -5.9 1.1 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "7447bb46-36c9-4cd4-9873-6484613a6bb1")
    )
    (pad "5" smd rect (at -5.9 1.9 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "544df6a8-8ae7-434c-a560-c264a0dcc293")
    )
    (pad "6" smd rect (at -5.9 2.7 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "0b4876ac-b484-4bc7-934f-4e5eea5ac1f0")
    )
    (pad "7" smd rect (at -5.9 3.5 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "8f6eba60-75af-4ed4-a384-f808c15bed3c")
    )
    (pad "8" smd rect (at -5.9 4.3 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "b8f99d02-7b5a-4703-8d0e-c721309f7020")
    )
    (pad "9" smd rect (at -5.9 5.1 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "7348e821-d7ad-4d96-a286-44c25b7e5a0c")
    )
    (pad "10" smd rect (at -5.9 5.9 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "86980ebf-29d9-4fb7-aa22-d7a5d6cab978")
    )
    (pad "11" smd rect (at -5.9 6.7 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "bb4190dd-9aeb-47f9-8317-2ab4729fd37e")
    )
    (pad "12" smd rect (at -4.8 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "9c1ce754-c534-4848-869c-9935fc64cb8c")
    )
    (pad "13" smd rect (at -4.0 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "cc7d9536-b227-48c3-8a23-050a1d9b1c04")
    )
    (pad "14" smd rect (at -3.2 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "7c51887d-7113-4656-8799-78527ca4e144")
    )
    (pad "15" smd rect (at -2.4 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "44bff1eb-f50d-41c3-a2bc-dc662b1cec95")
    )
    (pad "16" smd rect (at -1.6 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "091ed603-59fd-4be0-a9a9-47ce481d04ec")
    )
    (pad "17" smd rect (at -0.8 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "8f22d023-9e14-446a-882c-3197917c09eb")
    )
    (pad "18" smd rect (at 0.0 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "e722daa4-882f-4d8b-b28c-8a1b86e6d4b8")
    )
    (pad "19" smd rect (at 0.8 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "a086734a-9698-4740-8935-4d23c2cea875")
    )
    (pad "20" smd rect (at 1.6 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "c816af16-21b1-46c3-b65a-7d2db543cb36")
    )
    (pad "21" smd rect (at 2.4 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "7153418a-c11c-4303-a2e5-86313800e34b")
    )
    (pad "22" smd rect (at 3.2 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "7bda8351-8570-49e0-a80b-f514b0a8dbdd")
    )
    (pad "23" smd rect (at 4.0 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "31ea7db6-dd77-47ad-9ead-603fdc24e92f")
    )
    (pad "24" smd rect (at 4.8 7.6) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "dc2ada79-69ea-4e3e-91ce-2a088948f8f9")
    )
    (pad "25" smd rect (at 5.9 6.7 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "102d4e34-7320-4230-863d-2352ccbc8ffa")
    )
    (pad "26" smd rect (at 5.9 5.9 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "570a3e54-e140-406f-a498-bdf4c9dea570")
    )
    (pad "27" smd rect (at 5.9 5.1 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "37fd06fe-3ee6-43aa-ad2d-0d832582484d")
    )
    (pad "28" smd rect (at 5.9 4.3 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "2391f81d-3dd2-4a64-99ed-9cc53f9210ca")
    )
    (pad "29" smd rect (at 5.9 3.5 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "d78aaf9f-6f94-4df8-9943-bd79fe0caa23")
    )
    (pad "30" smd rect (at 5.9 2.7 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "58afc4c2-0f49-4af8-863d-67092f28b92a")
    )
    (pad "31" smd rect (at 5.9 1.9 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "59abb5b6-3109-464c-bfce-fe35640df7df")
    )
    (pad "32" smd rect (at 5.9 1.1 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "f36e6d1a-7558-47c5-bbf3-12c37065bad0")
    )
    (pad "33" smd rect (at 5.9 0.3 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "ad050b1e-9f21-47da-acb0-433510e0a2cf")
    )
    (pad "34" smd rect (at 5.9 -0.5 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "1d99a32b-751a-41a5-8b41-2a6c1338e1e7")
    )
    (pad "35" smd rect (at 5.9 -1.3 90.0) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "0a2ebe38-bee5-4155-986e-f702e57606f0")
    )
    (pad "36" smd rect (at 4.8 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "5145f05c-4b83-41e7-b9dc-b195f7db5ba6")
    )
    (pad "37" smd rect (at 4.0 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "4af32a07-fa3e-40e6-b5a0-e98132f38165")
    )
    (pad "38" smd rect (at 3.2 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "4b5e0c22-00ef-4546-9fb0-67f6691e24c5")
    )
    (pad "39" smd rect (at 2.4 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "dced9807-6f07-47f5-b399-8c1c363aba24")
    )
    (pad "40" smd rect (at 1.6 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "6e7446ba-1c55-4d73-8a4a-2cc055d18345")
    )
    (pad "41" smd rect (at 0.8 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "6b0644e5-b800-4762-a7e3-437b59c376d9")
    )
    (pad "42" smd rect (at 0.0 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "14e3ab63-bf3b-4fe1-9301-ac82eb89ae88")
    )
    (pad "43" smd rect (at -0.8 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "4946b85c-2183-4fb5-99c3-1142cec0a024")
    )
    (pad "44" smd rect (at -1.6 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "ce0a1594-f116-4720-aeaa-60a8d0e8a29f")
    )
    (pad "45" smd rect (at -2.4 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "1b93c7f7-0c07-49bb-8eb2-2aba9455174f")
    )
    (pad "46" smd rect (at -3.2 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "42fbb717-db37-4198-a8f5-4b17fdb0e0b2")
    )
    (pad "47" smd rect (at -4.0 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "c1dab290-c122-40c2-bb56-11235e6fb240")
    )
    (pad "48" smd rect (at -4.8 -2.2) (size 0.4 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "bffd6ee9-7908-4689-8396-3ceb5b67917e")
    )
    (pad "49" smd custom (at -1.975 0.725) (size 0.8 0.8)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "b831b130-bd58-4445-9fec-f0a146ad3c68")
    )
    (pad "49" smd rect (at -1.975 2.7 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "6d8d540e-68e9-43a0-b7ac-99e389bbc064")
    )
    (pad "49" smd rect (at -1.975 4.675 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "a2d537c7-c419-4b52-8d17-b2882b614c1c")
    )
    (pad "49" smd rect (at 0.0 0.725 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "e46365fa-5dd0-4981-a3b2-e391b789a5cb")
    )
    (pad "49" smd rect (at 0.0 2.7 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "562a0c5b-3412-4559-a08a-a0c622c7b64d")
    )
    (pad "49" smd rect (at 0.0 4.675 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "7d0f3ec7-08d6-4e8a-b662-a9654bea45a6")
    )
    (pad "49" smd rect (at 1.975 0.725 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "f32f4162-a136-4ed3-b04b-8f6642f00b12")
    )
    (pad "49" smd rect (at 1.975 2.7 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "3e8bc65c-d17b-4c08-8d0a-05d1e07095ce")
    )
    (pad "49" smd rect (at 1.975 4.675 90.0) (size 1.45 1.45)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "2caa4f21-cd69-4d97-a5f9-c8da73d97350")
    )
    (pad "50" smd rect (at 5.95 -2.25 90.0) (size 0.7 0.7)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "b25d3194-df48-490a-9450-e7c945659fde")
    )
    (pad "51" smd rect (at 5.95 7.65 90.0) (size 0.7 0.7)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "76b1a43d-a6a8-4839-8c64-90f368d8e4fc")
    )
    (pad "52" smd rect (at -5.95 7.65 90.0) (size 0.7 0.7)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "253b991a-a22b-4d0a-8f8d-f8394cbad111")
    )
    (pad "53" smd rect (at -5.95 -2.25 90.0) (size 0.7 0.7)
      (layers "F.Cu" "F.Paste" "F.Mask")
      (uuid "a04ccbae-c0fc-49c0-9745-f6c20f3b14b5")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 103.000 52.500 0.0)
    (uuid "c5f8cff6-3c0f-53a6-bf54-c64cbc0e19b6")
    (property "Reference" "C30" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "0bb301c6-ee81-4ef6-94f0-79dfa0edb372")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "1a9378fb-e0ee-4a54-96dd-672dd32b90a6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/c5f8cff6-3c0f-53a6-bf54-c64cbc0e19b6")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9b664b27-dfd0-4a0a-bf9e-cea800ea2fca")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ded3efc9-1a00-41dd-82d2-108da62fa9a8")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 107.000 52.500 0.0)
    (uuid "4e33c4e1-7235-537c-82ba-72e2fc2b2eb1")
    (property "Reference" "C31" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "999aa786-c4a9-4945-9db2-c08b3243b018")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "0d84651e-aa81-4c65-89ad-7168a5a2d149")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/4e33c4e1-7235-537c-82ba-72e2fc2b2eb1")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8b630ad7-6ce0-4e97-a5a0-fb0b0646c232")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "2b6864e2-7abc-4590-b041-59863cfda769")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 103.000 56.500 0.0)
    (uuid "aec9fb18-3d0c-544c-8f12-55d1ea82d99b")
    (property "Reference" "C32" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "798291ee-502d-4ca1-b4a2-6177f294657f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f17c9bd1-3621-4f88-b018-84255cf672c4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/aec9fb18-3d0c-544c-8f12-55d1ea82d99b")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "af7ed523-48c4-42e9-9861-adcd7085c285")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "189bfac2-2f8a-4772-a95b-da27119e8658")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 107.000 56.500 0.0)
    (uuid "ea48cbeb-6537-58a5-a120-922106013bbd")
    (property "Reference" "C33" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "afdee64a-6073-42f7-a80c-80483bf4c67d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "8db325d4-a825-4b19-9b48-f86ba2b43f53")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/ea48cbeb-6537-58a5-a120-922106013bbd")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "4cc7dd81-329d-4afe-937a-db7c56385630")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "73f51376-fafa-425b-8215-77fbb62f43e6")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 111.000 52.500 0.0)
    (uuid "fa9f6cc6-9a7a-5723-b00e-2cb79d3f8998")
    (property "Reference" "C15" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "6ad68788-29d6-44fb-a5bb-3ddc3212b596")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "723ec5b7-e05c-446a-81c7-f29cc74fe7da")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/fa9f6cc6-9a7a-5723-b00e-2cb79d3f8998")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9abdc596-2169-4e72-9e77-bed1d5fa96f3")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a108db92-508b-4d00-aab9-6d7de4824369")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 103.000 60.500 0.0)
    (uuid "8725e5bc-a05a-53dd-b607-e2123156cc85")
    (property "Reference" "R12" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "13e71030-1b2d-4227-9dc8-7c8c580d1684")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "6848da64-74a0-4416-96e1-cb3636cafdd7")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/8725e5bc-a05a-53dd-b607-e2123156cc85")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "06f24d6c-5134-4dd1-bed0-52813f21711d")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "15fc0e56-fd45-4060-8af6-1c66ab7b6866")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 107.000 60.500 0.0)
    (uuid "ecc743b9-96df-5e77-bd0f-b9d871125bda")
    (property "Reference" "R13" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "29a76fd6-bca1-4f72-851e-0dd65da1fc87")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "3671cdc0-7945-4b1b-bf8e-2214af524fda")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/ecc743b9-96df-5e77-bd0f-b9d871125bda")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "286810de-df09-413e-ac33-b1843573f068")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "bb3b1697-7827-486c-9e0d-17d73120334b")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 111.000 60.500 0.0)
    (uuid "505acda6-4458-5b9e-a652-1a048abfe46f")
    (property "Reference" "C13" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "e6c3cf83-0667-47a0-b41a-defd323b5f12")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "d921f2b3-c0d5-4c1e-bf09-039c74683768")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/505acda6-4458-5b9e-a652-1a048abfe46f")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "27588066-940e-4749-a878-abadce166a37")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "75107ff4-6077-436b-a34a-1d175be00336")
    )
  )
  (footprint "Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxG" (layer "F.Cu") (at 105.000 50.500 0.0)
    (uuid "fd0a3d75-2904-560f-bce1-191aa81c90b9")
    (property "Reference" "SW1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "6d244a9c-54f4-4555-8ecb-a8e680293f2a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "RESET" (at 0 1.5 0) (layer "F.Fab")
      (uuid "0f1392e7-2a69-4f23-9798-171266b17273")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/fd0a3d75-2904-560f-bce1-191aa81c90b9")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Tactile switch, 6.2x6.25 mm, H7.7 mm, gullwing leads, https://www.ckswitches.com/media/1972/ksc6.pdf")
	(tags "CK C&K SPST")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.21 -3.235)
		(end -3.21 -2.8)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "48d781ee-486e-42d3-8f96-85589ac81e8a")
	)
	(fp_line
		(start -3.21 -1.2)
		(end -3.21 1.2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "36946ff0-e832-4946-8993-1e01808fb45c")
	)
	(fp_line
		(start -3.21 2.8)
		(end -3.21 3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "fd3a409a-65ea-4662-8a09-dfd1aa9a2fbb")
	)
	(fp_line
		(start -3.21 3.235)
		(end 3.21 3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "d842b985-0462-4a48-8f61-edbb1fd418d0")
	)
	(fp_line
		(start 3.21 -3.235)
		(end -3.21 -3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "61e65515-f7c2-4d3c-8e1e-a3cf202ef285")
	)
	(fp_line
		(start 3.21 -2.8)
		(end 3.21 -3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "87c6dd89-1c02-40df-bd15-68cf6a8e6c8c")
	)
	(fp_line
		(start 3.21 1.2)
		(end 3.21 -1.2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e33a857d-7015-4d2b-ab54-0e0a5291f686")
	)
	(fp_line
		(start 3.21 3.235)
		(end 3.21 2.93)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "7d32279f-71f4-4220-8f4c-c577499207aa")
	)
	(fp_rect
		(start -6.25 -3.38)
		(end 6.25 3.38)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
		(uuid "3c7c46a5-228e-4e36-8084-ccab847b4455")
	)
	(fp_rect
		(start -3.1 -3.125)
		(end 3.1 3.125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
		(uuid "1913d34c-3865-42aa-86eb-b117faab3952")
	)
	(fp_circle
		(center 0 0)
		(end 1.475 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
		(uuid "552de40f-c054-4d97-92da-c7dacf926f68")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "3d272031-4790-4f93-ba29-aed4b9a9820b")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_Push_1P1T_NO_CK_KSC6xxG.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -4.45 -2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "67b54655-ff29-4e2b-9cfa-e21d9c10ded1")
    )
    (pad "1" smd roundrect (at 4.45 -2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7931ee2a-67f2-4e38-8ed7-06440c376dcc")
    )
    (pad "2" smd roundrect (at -4.45 2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "6949443b-0f80-4e7f-8d73-b2db34a383d7")
    )
    (pad "2" smd roundrect (at 4.45 2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a5917b1c-4ef1-4fa4-8bb1-bdf5fe61a5e9")
    )
  )
  (footprint "Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxG" (layer "F.Cu") (at 113.000 50.500 0.0)
    (uuid "f721ef27-6948-5e12-8b92-5518b9997cb8")
    (property "Reference" "SW2" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "331f390c-649e-490f-ba32-cf110af53ef0")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "BOOT" (at 0 1.5 0) (layer "F.Fab")
      (uuid "00476562-febd-4cc4-ae75-4fa86fba9d3b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/f721ef27-6948-5e12-8b92-5518b9997cb8")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Tactile switch, 6.2x6.25 mm, H7.7 mm, gullwing leads, https://www.ckswitches.com/media/1972/ksc6.pdf")
	(tags "CK C&K SPST")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.21 -3.235)
		(end -3.21 -2.8)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "48d781ee-486e-42d3-8f96-85589ac81e8a")
	)
	(fp_line
		(start -3.21 -1.2)
		(end -3.21 1.2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "36946ff0-e832-4946-8993-1e01808fb45c")
	)
	(fp_line
		(start -3.21 2.8)
		(end -3.21 3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "fd3a409a-65ea-4662-8a09-dfd1aa9a2fbb")
	)
	(fp_line
		(start -3.21 3.235)
		(end 3.21 3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "d842b985-0462-4a48-8f61-edbb1fd418d0")
	)
	(fp_line
		(start 3.21 -3.235)
		(end -3.21 -3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "61e65515-f7c2-4d3c-8e1e-a3cf202ef285")
	)
	(fp_line
		(start 3.21 -2.8)
		(end 3.21 -3.235)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "87c6dd89-1c02-40df-bd15-68cf6a8e6c8c")
	)
	(fp_line
		(start 3.21 1.2)
		(end 3.21 -1.2)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e33a857d-7015-4d2b-ab54-0e0a5291f686")
	)
	(fp_line
		(start 3.21 3.235)
		(end 3.21 2.93)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "7d32279f-71f4-4220-8f4c-c577499207aa")
	)
	(fp_rect
		(start -6.25 -3.38)
		(end 6.25 3.38)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
		(uuid "3c7c46a5-228e-4e36-8084-ccab847b4455")
	)
	(fp_rect
		(start -3.1 -3.125)
		(end 3.1 3.125)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
		(uuid "1913d34c-3865-42aa-86eb-b117faab3952")
	)
	(fp_circle
		(center 0 0)
		(end 1.475 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
		(uuid "552de40f-c054-4d97-92da-c7dacf926f68")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "3d272031-4790-4f93-ba29-aed4b9a9820b")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_Push_1P1T_NO_CK_KSC6xxG.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -4.45 -2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "dd60c9a6-9887-45c1-a530-d81dee115630")
    )
    (pad "1" smd roundrect (at 4.45 -2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "fdf2f78f-79b1-41cc-bc33-9e8205064b82")
    )
    (pad "2" smd roundrect (at -4.45 2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "04e31bb7-6911-4e12-9e83-f3d6d788e8c2")
    )
    (pad "2" smd roundrect (at 4.45 2.0) (size 3.1 1.0)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "32d38ceb-48d0-4a63-bab3-9240e8e227ab")
    )
  )
  (footprint "LED_SMD:LED_0603_1608Metric" (layer "F.Cu") (at 123.000 72.500 0.0)
    (uuid "0e35cef9-fd3f-5115-bf72-53650d2ccebb")
    (property "Reference" "D4" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "6ebcb7ae-2e60-4fa7-b7bb-57dd06929cbd")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "Status" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f3428254-e604-4e39-bf39-8759e010ff21")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/0e35cef9-fd3f-5115-bf72-53650d2ccebb")
	(layer "F.Cu")
	(descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf)")
	(tags "LED")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.485 -0.735)
		(end -1.485 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.485 0.735)
		(end 0.8 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.8 -0.735)
		(end -1.485 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.48 -0.73)
		(end 1.48 0.73)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.8 -0.1)
		(end -0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.8 0.4)
		(end 0.8 0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.5 -0.4)
		(end -0.8 -0.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 -0.4)
		(end -0.5 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.8 0.4)
		(end 0.8 -0.4)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.4 0.4)
				(thickness 0.06)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0603_1608Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.7875 0.0) (size 0.875 0.95)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a8f4fad0-e2b0-4a01-afb1-70c4ad12e6b5")
    )
    (pad "2" smd roundrect (at 0.7875 0.0) (size 0.875 0.95)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "842452f4-26ef-4745-93f1-d05379bfb33f")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 119.000 72.500 0.0)
    (uuid "07496cca-6951-529f-ae7b-8ed1cda3916a")
    (property "Reference" "R14" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "455d88b8-c7e6-4aa3-a4be-bf28377784e4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "6ac15d53-a0fa-41fb-afaf-a05a38fdd740")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/2b6726ca-47e0-5ff0-b8ba-45087cce0cf4/07496cca-6951-529f-ae7b-8ed1cda3916a")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9d560e18-8dbc-4551-97b5-fd9aa73f0c36")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "243f8cc1-f88f-408f-b1bd-3fe89a5ac90e")
    )
  )
  (footprint "Package_SO:MSOP-10_3x3mm_P0.5mm" (layer "F.Cu") (at 141.000 60.500 0.0)
    (uuid "3ac69d24-0c03-558c-ab71-e8baa4746964")
    (property "Reference" "U9" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "adc3a0cb-ca8f-4833-81d7-4b61833df050")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "ADS1115" (at 0 1.5 0) (layer "F.Fab")
      (uuid "83f48acc-a21d-49d6-9969-fd933cb4acbc")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/3ac69d24-0c03-558c-ab71-e8baa4746964")
	(layer "F.Cu")
	(descr "MSOP, 10 Pin (JEDEC MO-187 variation BA, 0.85mm body thickness, https://www.jedec.org/system/files/docs/mo-187F.pdf)")
	(tags "MSOP SO TSSOP-10_3x3mm_P0.5mm")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.61 -1.61)
		(end 1.61 -1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.61 -1.435)
		(end -1.61 -1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.61 1.61)
		(end -1.61 1.435)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.61 -1.61)
		(end 1.61 -1.435)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.61 1.435)
		(end 1.61 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.61 1.61)
		(end -1.61 1.61)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -2.16 -1.44)
			(xy -2.4 -1.77)
			(xy -1.92 -1.77)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -3.1 -1.43)
		(end -1.75 -1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -3.1 1.43)
		(end -3.1 -1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -1.75)
		(end 1.75 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -1.43)
		(end -1.75 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 1.43)
		(end -3.1 1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 1.75)
		(end -1.75 1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 -1.75)
		(end 1.75 -1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 -1.43)
		(end 3.1 -1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 1.43)
		(end 1.75 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.75 1.75)
		(end -1.75 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.1 -1.43)
		(end 3.1 1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 3.1 1.43)
		(end 1.75 1.43)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.75 -1.5)
			(xy 1.5 -1.5)
			(xy 1.5 1.5)
			(xy -1.5 1.5)
			(xy -1.5 -0.75)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.75 0.75)
				(thickness 0.11)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/MSOP-10_3x3mm_P0.5mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.1 -1.0) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "4b8ca1de-84f6-4eb0-a128-9284ee075ea9")
    )
    (pad "2" smd roundrect (at -2.1 -0.5) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "cd8a641f-5dba-4dab-bd99-49f186217d5a")
    )
    (pad "3" smd roundrect (at -2.1 0.0) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "dcc9d745-24f7-4a44-b90c-42493ed0ef7f")
    )
    (pad "4" smd roundrect (at -2.1 0.5) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "96fdc3cc-73d9-4cd7-9a71-dd59aed9c483")
    )
    (pad "5" smd roundrect (at -2.1 1.0) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7dda8f3f-9dc8-4933-9a7d-7a205d20c0d1")
    )
    (pad "6" smd roundrect (at 2.1 1.0) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ab315704-1679-4e8d-a72a-d06bbc05bff7")
    )
    (pad "7" smd roundrect (at 2.1 0.5) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "2b93987d-cdb8-47da-be8f-7d05e0017025")
    )
    (pad "8" smd roundrect (at 2.1 0.0) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "159d76eb-8320-41c6-bc08-5c62052f5308")
    )
    (pad "9" smd roundrect (at 2.1 -0.5) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7dea8bf5-a97c-407a-9fb9-60d72e023aa5")
    )
    (pad "10" smd roundrect (at 2.1 -1.0) (size 1.5 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5e30877c-62e8-4b8c-a732-e7b3292f706d")
    )
  )
  (footprint "Inductor_SMD:L_0402_1005Metric" (layer "F.Cu") (at 135.000 56.500 0.0)
    (uuid "dd345a3b-612a-55d4-9a7a-03e66e6326e1")
    (property "Reference" "FB1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "256807e8-df49-4605-91c5-65283123b1fa")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "Ferrite" (at 0 1.5 0) (layer "F.Fab")
      (uuid "9be686ca-30a9-4e85-b0ae-07633e441dc1")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/dd345a3b-612a-55d4-9a7a-03e66e6326e1")
	(layer "F.Cu")
	(descr "Inductor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf)")
	(tags "inductor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.485 0.0) (size 0.59 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "efc56d6e-a73d-411b-81ec-a1927c9cb84d")
    )
    (pad "2" smd roundrect (at 0.485 0.0) (size 0.59 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ea476b83-f13b-403e-91ac-bb9e1b908c59")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 135.000 60.500 0.0)
    (uuid "6368dbd6-e127-5d05-93f4-f243d457232e")
    (property "Reference" "C23" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "477647f7-a7c1-4881-97d7-57304a77073b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "fbec7795-0638-40f4-be9a-6825f70642c5")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/6368dbd6-e127-5d05-93f4-f243d457232e")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "c39ae596-26dd-4224-857a-2d281019b909")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "03d88078-d8e5-4be4-b98b-6cd5d14d7c3f")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 135.000 64.500 0.0)
    (uuid "430bdda8-381d-5662-82f5-6771d13bcf5a")
    (property "Reference" "C24" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "549efe8a-77f6-4d6c-a49c-c2798dc91216")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "58044f1e-8b2e-4ce0-98a8-3adf19519e12")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/430bdda8-381d-5662-82f5-6771d13bcf5a")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8f135186-9c21-438f-abfb-0e2f2062d19f")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "baef8226-8958-48f6-aa3b-b58440742492")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 141.000 66.500 0.0)
    (uuid "a51a9487-bcfd-516e-a69e-a45d8f3a0db6")
    (property "Reference" "R28" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "b7c1250a-1713-4ef1-ab44-2db76de8cdb1")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100R" (at 0 1.5 0) (layer "F.Fab")
      (uuid "cdfa4450-2328-4013-8395-fc8d474c9a3f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/a51a9487-bcfd-516e-a69e-a45d8f3a0db6")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "37209e7d-d10b-41cc-9071-44d44777b493")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1faf870a-d080-45c8-bfaa-61c7641eb513")
    )
  )
  (footprint "Package_TO_SOT_SMD:SOT-23" (layer "F.Cu") (at 135.000 52.500 0.0)
    (uuid "612ec188-0353-53c1-b423-4e50bb30ec0b")
    (property "Reference" "Q2" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "4e017158-3c5b-42e1-a28e-74690ca6be5a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "BSS123" (at 0 1.5 0) (layer "F.Fab")
      (uuid "78205d7c-150f-45d4-9c82-701b63ecb00f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/612ec188-0353-53c1-b423-4e50bb30ec0b")
	(layer "F.Cu")
	(descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236)")
	(tags "SOT TO_SOT_SMD")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.76 -1.56)
		(end 0.76 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.76 -1.51)
		(end -0.76 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.76 0.39)
		(end -0.76 -0.39)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.76 1.56)
		(end -0.76 1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.76 -1.56)
		(end 0.76 -0.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.76 0.56)
		(end 0.76 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.76 1.56)
		(end -0.76 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.3 -0.38)
			(xy -1.06 -0.05)
			(xy -1.54 -0.05)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.93 -1.5)
		(end -0.9 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.93 -0.39)
		(end -1.93 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.93 0.39)
		(end -0.9 0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.93 1.5)
		(end -1.93 0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 -1.7)
		(end 0.9 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 -1.5)
		(end -0.9 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 -0.39)
		(end -1.93 -0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 0.39)
		(end -0.9 -0.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 1.5)
		(end -1.93 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.9 1.7)
		(end -0.9 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 -1.7)
		(end 0.9 -0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 -0.55)
		(end 1.93 -0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 0.55)
		(end 0.9 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.9 1.7)
		(end -0.9 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.93 -0.55)
		(end 1.93 0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.93 0.55)
		(end 0.9 0.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.325 -1.45)
			(xy 0.65 -1.45)
			(xy 0.65 1.45)
			(xy -0.65 1.45)
			(xy -0.65 -1.125)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.72 0.72)
				(thickness 0.11)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.9375 -0.95) (size 1.475 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1682d950-732b-4b7a-b697-a24f059e40d5")
    )
    (pad "2" smd roundrect (at -0.9375 0.95) (size 1.475 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "d6a6f742-8896-486f-87cb-1f727611bb7c")
    )
    (pad "3" smd roundrect (at 0.9375 0.0) (size 1.475 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "ffdfc7f4-7a95-4bde-9367-8c46a73e45f3")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 141.000 50.500 0.0)
    (uuid "40d042c0-80b6-5a39-98a6-5198edbdc93b")
    (property "Reference" "R7" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "1c2e7d6b-228c-4184-8932-023026960a17")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "330k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "04d61954-a224-4368-9812-8cbf01f680d1")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/40d042c0-80b6-5a39-98a6-5198edbdc93b")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8165d14a-504e-496d-a72a-b281fe516ddf")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9a261526-2285-4a01-a810-62dfdf36afda")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 141.000 54.500 0.0)
    (uuid "774a0f87-9333-59d2-91d2-e1a970f82c67")
    (property "Reference" "R8" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "32cb5666-5183-4583-ad6b-baaff3c94a4f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "87ffb640-a78d-47e5-a603-b3f0bf8a49f5")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/774a0f87-9333-59d2-91d2-e1a970f82c67")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "d156a084-994c-4198-b49c-3f8fdf6e2149")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "eb70b4df-3810-4d4b-815c-7f12e74ad0a0")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 139.000 56.500 0.0)
    (uuid "86d0e82c-a3c8-5c7a-b009-8679045d44dd")
    (property "Reference" "C8" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "d11aa204-a540-41d9-a31d-b42f7e78685f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "40e2c135-a046-46aa-87e6-1598835ebcae")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/86d0e82c-a3c8-5c7a-b009-8679045d44dd")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7218a16a-a951-4572-8a79-291fca4502fa")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "22d0abe8-ed81-4d0d-9b07-4d82fa3e9938")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 141.000 56.500 0.0)
    (uuid "a615e2e0-a6f1-5607-accc-0cf4ce691bc6")
    (property "Reference" "R26" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "52ad9042-516c-4fce-85a2-4185e9f85459")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4k7" (at 0 1.5 0) (layer "F.Fab")
      (uuid "d8e61d66-664a-4914-a059-8d1e38b2e884")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/a615e2e0-a6f1-5607-accc-0cf4ce691bc6")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8754cc69-ade8-4248-a310-ac62bde6b47a")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7868df66-35f4-4365-a5f6-0bb6a23eee1d")
    )
  )
  (footprint "Diode_SMD:D_SMA" (layer "F.Cu") (at 137.000 74.500 0.0)
    (uuid "45bf4248-04e7-57b1-9eec-a5758f041ece")
    (property "Reference" "D9" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "ec45dff1-9387-4d54-8321-94e9441fe879")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SMAJ3.3" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ed5c7203-e769-42e2-bc8e-b1ad3d801f0c")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/45bf4248-04e7-57b1-9eec-a5758f041ece")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Diode SMA (DO-214AC)")
	(tags "Diode SMA (DO-214AC)")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.51 -1.65)
		(end -3.51 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412")
	)
	(fp_line
		(start -3.51 -1.65)
		(end 2 -1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307")
	)
	(fp_line
		(start -3.51 1.65)
		(end 2 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "dff34e10-67ca-4b77-95c8-838244782165")
	)
	(fp_line
		(start -3.5 -1.75)
		(end 3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837")
	)
	(fp_line
		(start -3.5 1.75)
		(end -3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2dd2626e-6f74-400d-9266-48b047137055")
	)
	(fp_line
		(start 3.5 -1.75)
		(end 3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4ca79e24-2e7b-47bd-871d-fec997d695df")
	)
	(fp_line
		(start 3.5 1.75)
		(end -3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d08df98a-2ea9-4491-a654-062a8028f290")
	)
	(fp_line
		(start -2.3 1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5")
	)
	(fp_line
		(start -0.64944 -0.79908)
		(end -0.64944 0.80112)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "0f99da12-e271-4d4a-8797-6ea6343d195d")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end -1.55114 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 0.75032)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d55225e2-3236-4507-bfd9-80a48f293c40")
	)
	(fp_line
		(start 0.50118 0.00102)
		(end 1.4994 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "46fe74cf-81ca-444c-a727-666d0e34a994")
	)
	(fp_line
		(start 0.50118 0.75032)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7c1208d5-7637-4920-8943-369f975b8a74")
	)
	(fp_line
		(start 2.3 -1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032")
	)
	(fp_line
		(start 2.3 -1.5)
		(end 2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d13e07f1-e4fe-4d02-b51c-871844057f50")
	)
	(fp_line
		(start 2.3 1.5)
		(end -2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f849bb85-eee3-44d9-b881-7f1627d4304a")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -2.5 0)
		(layer "F.Fab")
		(uuid "84118230-d2f4-4bb3-819b-e1cb088384b6")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9caf66e3-d36e-4e8f-866c-e24659f67a17")
    )
    (pad "2" smd roundrect (at 2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7950298a-55c7-4f4c-9afa-aeacfee413b9")
    )
  )
  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") (at 143.000 78.500 0.0)
    (uuid "ff145230-0cf7-56ff-883e-6c0a705e5308")
    (property "Reference" "R2" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "38389e14-1afd-4eaf-884d-73f86be3625c")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100R" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ad158b47-a9d8-4395-b12f-db65eb726c6d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/ff145230-0cf7-56ff-883e-6c0a705e5308")
	(layer "F.Cu")
	(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.227064 -0.735)
		(end 0.227064 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.227064 0.735)
		(end 0.227064 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.68 -0.95)
		(end 1.68 0.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.9125 0.0) (size 1.025 1.4)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "aebbf44d-11b3-40cf-8471-95a24ba4cbc4")
    )
    (pad "2" smd roundrect (at 0.9125 0.0) (size 1.025 1.4)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8c9e9a56-a60d-4166-a2b2-3366d78cf3a4")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 137.000 78.500 0.0)
    (uuid "e8d4d42a-e778-5c4f-8d45-ea1b096e248a")
    (property "Reference" "R3" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "4e84706a-e4c8-4f4d-98ad-929dffb31fec")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100R" (at 0 1.5 0) (layer "F.Fab")
      (uuid "45463381-ce21-4e04-b333-b74b078d7f90")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/e8d4d42a-e778-5c4f-8d45-ea1b096e248a")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a7847271-2d31-44ff-82e2-8169f1930fb6")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "6a6cbb14-c8f6-4ba2-bb0f-cd38f9ac4037")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 139.000 82.500 0.0)
    (uuid "1e9a55b1-65b7-5554-8693-b678ba858cb2")
    (property "Reference" "C3" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "6eaaea57-d8c9-4436-858a-22f545fa5664")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "d4c718a8-400d-4610-acb8-b4d8ddb55cff")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/1e9a55b1-65b7-5554-8693-b678ba858cb2")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e053c552-ba34-46cc-a53e-eb59f4568509")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "abb08c83-cd4f-4e10-8a87-3c13083fa906")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 143.000 82.500 0.0)
    (uuid "a859cef0-5f43-5743-b803-8abdab943992")
    (property "Reference" "C4" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "bf92d373-36a1-4fd4-a3ae-9979d2364262")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "9a5096bc-5660-46b0-bc0a-6a0c4ed4d5ef")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/a859cef0-5f43-5743-b803-8abdab943992")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "85604f45-eaaf-452c-90c7-59c40926ec54")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b7f26c4e-a512-43ba-bd24-31f9f8905945")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 143.000 74.500 0.0)
    (uuid "ccc9fe68-3bb0-53ed-94aa-2dd36c5b33df")
    (property "Reference" "C34" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "392320dc-c1e5-4213-ac1d-ba8f3d3d4646")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "2d01af44-deb8-419d-8b78-983ab6e730b9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/ccc9fe68-3bb0-53ed-94aa-2dd36c5b33df")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7f0d1cc7-3356-4db0-8bdb-4d40c6fd3c22")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8be46da1-c749-48ed-80a7-30da871138db")
    )
  )
  (footprint "Diode_SMD:D_SMA" (layer "F.Cu") (at 151.000 74.500 0.0)
    (uuid "13c1c990-e188-5543-97ec-33bb4f3ca7bc")
    (property "Reference" "D10" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "a8c6513a-e0bd-463f-998d-ff50ec48018d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SMAJ3.3" (at 0 1.5 0) (layer "F.Fab")
      (uuid "e02fe8cd-9cd1-4ef9-9da6-8ff73fc80149")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/13c1c990-e188-5543-97ec-33bb4f3ca7bc")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Diode SMA (DO-214AC)")
	(tags "Diode SMA (DO-214AC)")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.51 -1.65)
		(end -3.51 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412")
	)
	(fp_line
		(start -3.51 -1.65)
		(end 2 -1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307")
	)
	(fp_line
		(start -3.51 1.65)
		(end 2 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "dff34e10-67ca-4b77-95c8-838244782165")
	)
	(fp_line
		(start -3.5 -1.75)
		(end 3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837")
	)
	(fp_line
		(start -3.5 1.75)
		(end -3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2dd2626e-6f74-400d-9266-48b047137055")
	)
	(fp_line
		(start 3.5 -1.75)
		(end 3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4ca79e24-2e7b-47bd-871d-fec997d695df")
	)
	(fp_line
		(start 3.5 1.75)
		(end -3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d08df98a-2ea9-4491-a654-062a8028f290")
	)
	(fp_line
		(start -2.3 1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5")
	)
	(fp_line
		(start -0.64944 -0.79908)
		(end -0.64944 0.80112)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "0f99da12-e271-4d4a-8797-6ea6343d195d")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end -1.55114 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 0.75032)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d55225e2-3236-4507-bfd9-80a48f293c40")
	)
	(fp_line
		(start 0.50118 0.00102)
		(end 1.4994 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "46fe74cf-81ca-444c-a727-666d0e34a994")
	)
	(fp_line
		(start 0.50118 0.75032)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7c1208d5-7637-4920-8943-369f975b8a74")
	)
	(fp_line
		(start 2.3 -1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032")
	)
	(fp_line
		(start 2.3 -1.5)
		(end 2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d13e07f1-e4fe-4d02-b51c-871844057f50")
	)
	(fp_line
		(start 2.3 1.5)
		(end -2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f849bb85-eee3-44d9-b881-7f1627d4304a")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -2.5 0)
		(layer "F.Fab")
		(uuid "84118230-d2f4-4bb3-819b-e1cb088384b6")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a5e932e9-5b55-4837-9a01-4844a2a7dabc")
    )
    (pad "2" smd roundrect (at 2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "d4defe95-c9e2-4c01-bed4-ad6f947781d9")
    )
  )
  (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") (at 157.000 78.500 0.0)
    (uuid "6ac18c8f-4599-52ac-a65a-3d6ff48da809")
    (property "Reference" "R4" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "47a4da9b-9031-48a6-b89b-2bb88aca3199")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100R" (at 0 1.5 0) (layer "F.Fab")
      (uuid "c29593e6-f58f-4946-a5e2-1af5224a91bb")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/6ac18c8f-4599-52ac-a65a-3d6ff48da809")
	(layer "F.Cu")
	(descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.227064 -0.735)
		(end 0.227064 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.227064 0.735)
		(end 0.227064 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.68 -0.95)
		(end 1.68 0.95)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.9125 0.0) (size 1.025 1.4)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "d6db454d-1144-41b0-b3f8-1a925755c94c")
    )
    (pad "2" smd roundrect (at 0.9125 0.0) (size 1.025 1.4)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "f878eabe-3529-4d0e-b1ca-8869b22f25ac")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 151.000 78.500 0.0)
    (uuid "51113e94-1f67-532f-8950-470efa09ad32")
    (property "Reference" "R5" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "b0d95f4d-7a5d-4882-9cb5-54a93852b10d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100R" (at 0 1.5 0) (layer "F.Fab")
      (uuid "5ac4a2e1-41f9-4926-b2a7-686f3c58e15e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/51113e94-1f67-532f-8950-470efa09ad32")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5ce8a8e3-009f-4b8c-9e3d-25ca2bb524ab")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e9b1e0f3-2c87-44af-ba6e-1473713552ad")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 153.000 82.500 0.0)
    (uuid "542de640-3996-57c8-aec2-d46dcac3cbad")
    (property "Reference" "C5" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "71467d06-fa9a-421e-b7f5-e5e43fd3ff27")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "b25cfca2-ba17-45f1-ab55-82e06663d15e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/542de640-3996-57c8-aec2-d46dcac3cbad")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "d07fd5eb-fdff-4f14-b692-5f39682d77bb")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "8ce0d032-4885-4259-ba20-ab11f63e9746")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 157.000 82.500 0.0)
    (uuid "17300d88-0e9d-5af3-b84d-30e1813ca9b6")
    (property "Reference" "C6" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "1d86b226-254b-4f83-9887-bc40b763be22")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "2016bbb0-d364-4b2c-84bc-a38525ca2720")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/17300d88-0e9d-5af3-b84d-30e1813ca9b6")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1fd84845-8de2-4ab9-ac03-5f088aafbbec")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "0c8152ac-60f0-4108-aea8-a37cbd83cc4e")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 157.000 74.500 0.0)
    (uuid "72f9bbc9-5f71-5261-9670-c69bdaf0c149")
    (property "Reference" "C35" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "0f71c5f4-7213-4338-8401-73be70835c3c")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ddedb9a0-9048-4ff4-9ce7-31c7b29c188c")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/72f9bbc9-5f71-5261-9670-c69bdaf0c149")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "abdb4f87-d8b2-40e2-b094-a20ccd102144")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "85999bc2-4bd7-4d9a-9dfc-ec51943c48c9")
    )
  )
  (footprint "Package_TO_SOT_SMD:SOT-363_SC-70-6" (layer "F.Cu") (at 133.000 72.500 0.0)
    (uuid "75f4acf2-4804-59b9-acb9-891656b1f68f")
    (property "Reference" "D1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "67bea455-ad14-4c04-9b80-e4a878d8e23b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "PRTR5V" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ab9022af-575b-4ea0-8d3a-7f9c8f1f89d7")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/75f4acf2-4804-59b9-acb9-891656b1f68f")
	(layer "F.Cu")
	(descr "SOT, 6 Pin (https://home.jeita.or.jp/tsc/std-pdf/ED-7500A.pdf#page=170, JEDEC MO-203, variant AB, https://www.jedec.org/document_search?search_api_views_fulltext=MO-203)")
	(tags "SOT TO_SOT_SMD SC-88 SOT-363 SC-70-6 US6 UMT6 S-Mini6 TSSOP6")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.735 -1.11)
		(end 0.735 -1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.735 -1.085)
		(end -0.735 -1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.735 1.11)
		(end -0.735 1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.735 -1.11)
		(end 0.735 -1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.735 1.085)
		(end 0.735 1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.735 1.11)
		(end -0.735 1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.18 -1.09)
			(xy -1.32 -1.28)
			(xy -1.04 -1.28)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.45 -0.93)
		(end -0.73 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.45 0.93)
		(end -1.45 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 -1.1)
		(end 0.73 -1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 -0.93)
		(end -0.73 -1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 0.93)
		(end -1.45 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 1.1)
		(end -0.73 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 -1.1)
		(end 0.73 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 -0.93)
		(end 1.45 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 0.93)
		(end 0.73 1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 1.1)
		(end -0.73 1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.45 -0.93)
		(end 1.45 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.45 0.93)
		(end 0.73 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.3125 -1)
			(xy 0.625 -1)
			(xy 0.625 1)
			(xy -0.625 1)
			(xy -0.625 -0.6875)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-363_SC-70-6.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.8375 -0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9cf7935c-11c4-4fcb-bf04-46a5f8ef49ad")
    )
    (pad "2" smd roundrect (at -0.8375 0.0) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "77dff8c5-c4cf-43bb-b5ab-811af2bb19ed")
    )
    (pad "3" smd roundrect (at -0.8375 0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1b6ce375-c7f7-4588-8dd6-8eb91d485a2b")
    )
    (pad "4" smd roundrect (at 0.8375 0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "86d04fa7-4bd1-443e-92a9-25e15f0301c8")
    )
    (pad "5" smd roundrect (at 0.8375 0.0) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "14a372fe-b9c7-4132-90f7-84ddcc95bbbd")
    )
    (pad "6" smd roundrect (at 0.8375 -0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "296dfa12-a575-4ff8-a3fe-e95d4ba717c9")
    )
  )
  (footprint "Package_TO_SOT_SMD:SOT-363_SC-70-6" (layer "F.Cu") (at 147.000 80.500 0.0)
    (uuid "f292b6b0-8ca1-5b91-a002-6e38e160fed6")
    (property "Reference" "D12" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "1fe8a331-75b1-4bb5-bc6b-955ecad6e8e5")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "PRTR5V" (at 0 1.5 0) (layer "F.Fab")
      (uuid "566a8741-75e7-4b28-aeb9-3f026970b7a4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/f292b6b0-8ca1-5b91-a002-6e38e160fed6")
	(layer "F.Cu")
	(descr "SOT, 6 Pin (https://home.jeita.or.jp/tsc/std-pdf/ED-7500A.pdf#page=170, JEDEC MO-203, variant AB, https://www.jedec.org/document_search?search_api_views_fulltext=MO-203)")
	(tags "SOT TO_SOT_SMD SC-88 SOT-363 SC-70-6 US6 UMT6 S-Mini6 TSSOP6")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.735 -1.11)
		(end 0.735 -1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.735 -1.085)
		(end -0.735 -1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.735 1.11)
		(end -0.735 1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.735 -1.11)
		(end 0.735 -1.085)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.735 1.085)
		(end 0.735 1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.735 1.11)
		(end -0.735 1.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.18 -1.09)
			(xy -1.32 -1.28)
			(xy -1.04 -1.28)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.45 -0.93)
		(end -0.73 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.45 0.93)
		(end -1.45 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 -1.1)
		(end 0.73 -1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 -0.93)
		(end -0.73 -1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 0.93)
		(end -1.45 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -0.73 1.1)
		(end -0.73 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 -1.1)
		(end 0.73 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 -0.93)
		(end 1.45 -0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 0.93)
		(end 0.73 1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 0.73 1.1)
		(end -0.73 1.1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.45 -0.93)
		(end 1.45 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.45 0.93)
		(end 0.73 0.93)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.3125 -1)
			(xy 0.625 -1)
			(xy 0.625 1)
			(xy -0.625 1)
			(xy -0.625 -0.6875)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-363_SC-70-6.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.8375 -0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a9c2fba9-65fc-415e-a382-bc7ccbd635d6")
    )
    (pad "2" smd roundrect (at -0.8375 0.0) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "c92ce61b-00aa-400a-a57f-1f5dacd20744")
    )
    (pad "3" smd roundrect (at -0.8375 0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "03741a4b-ecdb-434a-85d7-06881f2dddf4")
    )
    (pad "4" smd roundrect (at 0.8375 0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9e59ac7c-c25c-43b1-8df5-95c5b0f71d4c")
    )
    (pad "5" smd roundrect (at 0.8375 0.0) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "850b6ca3-e4a1-4c5a-986d-42b9024c2353")
    )
    (pad "6" smd roundrect (at 0.8375 -0.65) (size 1.025 0.35)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "d3d69243-27dd-4b5b-b236-1769f5f0001b")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 147.000 82.500 0.0)
    (uuid "02c0bbda-89a9-58d1-b22c-2c2748fa12d0")
    (property "Reference" "C7" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "75bd5bfc-361a-4796-8f94-cecd9dda2e65")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "e570a4c4-c3f5-4091-ad1d-8b93ee76a04c")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/02c0bbda-89a9-58d1-b22c-2c2748fa12d0")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "e05c9d45-e301-4ae5-b6fa-4e064c40fae7")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5853f345-bccb-4ae4-98f9-322c70820041")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 147.000 78.500 0.0)
    (uuid "92a0f295-cb0b-5b79-bf1a-5d2dff204e4a")
    (property "Reference" "R6" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "b45e78b9-e38c-4d64-b0be-42c098d60d82")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4k7" (at 0 1.5 0) (layer "F.Fab")
      (uuid "119e4ad7-f06c-487c-8e08-c906fed1ac5d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/92a0f295-cb0b-5b79-bf1a-5d2dff204e4a")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "52a49747-62f8-4d18-beb2-ec060a0fec0d")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "393844c9-12c9-4072-8e94-d28d703e84e2")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 153.000 78.500 0.0)
    (uuid "6b64bde1-7d03-51af-8680-95b6189e03a9")
    (property "Reference" "R32" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "da3bff08-a6f4-42aa-8991-49f3d7dfb341")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "33R" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f6f2c8a2-432d-459b-b53c-70fe35e3111e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/6b64bde1-7d03-51af-8680-95b6189e03a9")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "a6009523-dd0b-4ee8-859f-fe5ac94dbf52")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "61dade70-234d-43de-bff7-c59e85808b21")
    )
  )
  (footprint "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal" (layer "F.Cu") (at 85.000 92.500 0.0)
    (uuid "b16ffbb1-7a97-50e4-8db8-14a275c0eec3")
    (property "Reference" "J12" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "0121ec6e-a183-4f55-a1bd-6606a0e171f0")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "Solar" (at 0 1.5 0) (layer "F.Fab")
      (uuid "bb012463-c9ff-4292-afb8-fe1bc0ebc288")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/b16ffbb1-7a97-50e4-8db8-14a275c0eec3")
	(layer "F.Cu")
	(descr "Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, pitch 3.5mm, size 7x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, ")
	(tags "THT Terminal Block Phoenix PT-1,5-2-3.5-H pitch 3.5mm size 7x7.6mm drill 1.2mm pad 2.4mm")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.87 -3.22)
		(end 5.37 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 3)
		(end 5.37 3)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.1)
		(end 5.37 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.62)
		(end -1.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.3 4.62)
		(end -1.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.37 -3.22)
		(end 5.37 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 5.37 4.62)
		(end 0.3 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy 0 4.62)
			(xy 0.44 5.23)
			(xy -0.44 5.23)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.25 -3.6)
		(end 5.75 5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -3.1)
		(end 5.25 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 3)
		(end 5.25 3)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end -1.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end 5.25 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.35 4.5)
		(end -1.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.955 -1.138)
		(end -1.138 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.138 -0.955)
		(end -0.955 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.455 -1.138)
		(end 2.362 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.638 -0.955)
		(end 2.545 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.25 -3.1)
		(end 5.25 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 5.25 4.5)
		(end -1.35 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_circle
		(center 0 0)
		(end 1.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 3.5 0)
		(end 5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 1.75 2.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole roundrect (at 0.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "f5d85280-ed87-4ba3-aed6-a493153031f5")
    )
    (pad "2" thru_hole circle (at 3.5 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "23f238ae-e761-439b-9ad5-8ce31c4a6d01")
    )
  )
  (footprint "Diode_SMD:D_SMA" (layer "F.Cu") (at 82.000 88.500 0.0)
    (uuid "cbe68adf-f8df-502d-b4e5-55250cce8699")
    (property "Reference" "D14" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "1d03c902-4f79-4f7a-ae81-fc271d72909f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SMAJ28CA" (at 0 1.5 0) (layer "F.Fab")
      (uuid "769345ae-6b6f-458a-bdfb-f01ffbd00cf6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/cbe68adf-f8df-502d-b4e5-55250cce8699")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Diode SMA (DO-214AC)")
	(tags "Diode SMA (DO-214AC)")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.51 -1.65)
		(end -3.51 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412")
	)
	(fp_line
		(start -3.51 -1.65)
		(end 2 -1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307")
	)
	(fp_line
		(start -3.51 1.65)
		(end 2 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "dff34e10-67ca-4b77-95c8-838244782165")
	)
	(fp_line
		(start -3.5 -1.75)
		(end 3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837")
	)
	(fp_line
		(start -3.5 1.75)
		(end -3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2dd2626e-6f74-400d-9266-48b047137055")
	)
	(fp_line
		(start 3.5 -1.75)
		(end 3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4ca79e24-2e7b-47bd-871d-fec997d695df")
	)
	(fp_line
		(start 3.5 1.75)
		(end -3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d08df98a-2ea9-4491-a654-062a8028f290")
	)
	(fp_line
		(start -2.3 1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5")
	)
	(fp_line
		(start -0.64944 -0.79908)
		(end -0.64944 0.80112)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "0f99da12-e271-4d4a-8797-6ea6343d195d")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end -1.55114 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 0.75032)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d55225e2-3236-4507-bfd9-80a48f293c40")
	)
	(fp_line
		(start 0.50118 0.00102)
		(end 1.4994 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "46fe74cf-81ca-444c-a727-666d0e34a994")
	)
	(fp_line
		(start 0.50118 0.75032)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7c1208d5-7637-4920-8943-369f975b8a74")
	)
	(fp_line
		(start 2.3 -1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032")
	)
	(fp_line
		(start 2.3 -1.5)
		(end 2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d13e07f1-e4fe-4d02-b51c-871844057f50")
	)
	(fp_line
		(start 2.3 1.5)
		(end -2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f849bb85-eee3-44d9-b881-7f1627d4304a")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -2.5 0)
		(layer "F.Fab")
		(uuid "84118230-d2f4-4bb3-819b-e1cb088384b6")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "47b6190f-97e1-4113-b6a1-e2ba357a43f1")
    )
    (pad "2" smd roundrect (at 2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b8a0e755-e7bb-43f3-9410-2480cb56000a")
    )
  )
  (footprint "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal" (layer "F.Cu") (at 99.000 92.500 0.0)
    (uuid "173368be-9bab-5b26-bad9-7ab6cf265f6c")
    (property "Reference" "J4" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "4db57521-61f6-4803-bef2-6b81875c0050")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4-20mA_1" (at 0 1.5 0) (layer "F.Fab")
      (uuid "201fafa8-f0e1-4977-aa9d-837ce18385d6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/173368be-9bab-5b26-bad9-7ab6cf265f6c")
	(layer "F.Cu")
	(descr "Terminal Block Phoenix PT-1,5-3-3.5-H, 3 pins, pitch 3.5mm, size 10.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, ")
	(tags "THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 10.5x7.6mm drill 1.2mm pad 2.4mm")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.87 -3.22)
		(end 8.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 3)
		(end 8.87 3)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.1)
		(end 8.87 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.62)
		(end -1.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.3 4.62)
		(end -1.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 -3.22)
		(end 8.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 4.62)
		(end 0.3 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy 0 4.62)
			(xy 0.44 5.23)
			(xy -0.44 5.23)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.25 -3.6)
		(end 9.25 5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -3.1)
		(end 8.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 3)
		(end 8.75 3)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end -1.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end 8.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.35 4.5)
		(end -1.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.955 -1.138)
		(end -1.138 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.138 -0.955)
		(end -0.955 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.455 -1.138)
		(end 2.362 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.638 -0.955)
		(end 2.545 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 7.955 -1.138)
		(end 5.862 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.138 -0.955)
		(end 6.045 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 -3.1)
		(end 8.75 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 4.5)
		(end -1.35 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_circle
		(center 0 0)
		(end 1.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 3.5 0)
		(end 5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 7 0)
		(end 8.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 3.5 2.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole roundrect (at 0.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "4d274ec1-4b08-40fd-bbe8-6308a63a3d68")
    )
    (pad "2" thru_hole circle (at 3.5 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "bcc74610-f60f-4884-a686-66664542c8d3")
    )
    (pad "3" thru_hole circle (at 7.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "de8f8839-7d7f-4494-9380-d2f14abe8d6a")
    )
  )
  (footprint "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal" (layer "F.Cu") (at 115.000 92.500 0.0)
    (uuid "d7e14510-467e-5783-829c-dc92f1d26627")
    (property "Reference" "J5" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "a082e3bd-ffd7-46ea-868f-c5e470fe0135")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4-20mA_2" (at 0 1.5 0) (layer "F.Fab")
      (uuid "878478a0-7ad5-4dc3-ab61-32e61a254d29")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/d7e14510-467e-5783-829c-dc92f1d26627")
	(layer "F.Cu")
	(descr "Terminal Block Phoenix PT-1,5-3-3.5-H, 3 pins, pitch 3.5mm, size 10.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, ")
	(tags "THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 10.5x7.6mm drill 1.2mm pad 2.4mm")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.87 -3.22)
		(end 8.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 3)
		(end 8.87 3)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.1)
		(end 8.87 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.62)
		(end -1.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.3 4.62)
		(end -1.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 -3.22)
		(end 8.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 4.62)
		(end 0.3 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy 0 4.62)
			(xy 0.44 5.23)
			(xy -0.44 5.23)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.25 -3.6)
		(end 9.25 5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -3.1)
		(end 8.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 3)
		(end 8.75 3)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end -1.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end 8.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.35 4.5)
		(end -1.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.955 -1.138)
		(end -1.138 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.138 -0.955)
		(end -0.955 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.455 -1.138)
		(end 2.362 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.638 -0.955)
		(end 2.545 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 7.955 -1.138)
		(end 5.862 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.138 -0.955)
		(end 6.045 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 -3.1)
		(end 8.75 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 4.5)
		(end -1.35 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_circle
		(center 0 0)
		(end 1.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 3.5 0)
		(end 5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 7 0)
		(end 8.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 3.5 2.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole roundrect (at 0.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "ce1fd5bf-621f-44a8-a261-3babb293e9b3")
    )
    (pad "2" thru_hole circle (at 3.5 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "1e36c8c0-1231-4caa-9f1d-26c41723e3d8")
    )
    (pad "3" thru_hole circle (at 7.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "7bd98c69-8aa2-4efd-a65d-5dcceffe7b43")
    )
  )
  (footprint "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal" (layer "F.Cu") (at 131.000 92.500 0.0)
    (uuid "c6a1ae8a-c217-5c59-b7cc-fa5bb7f7cdfa")
    (property "Reference" "J6" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "7a6acc9d-0a01-4e73-b614-a1553de9f918")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "DS18B20" (at 0 1.5 0) (layer "F.Fab")
      (uuid "85550ffe-ea97-4176-b179-b036b27963e7")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/c6a1ae8a-c217-5c59-b7cc-fa5bb7f7cdfa")
	(layer "F.Cu")
	(descr "Terminal Block Phoenix PT-1,5-3-3.5-H, 3 pins, pitch 3.5mm, size 10.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, ")
	(tags "THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 10.5x7.6mm drill 1.2mm pad 2.4mm")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.87 -3.22)
		(end 8.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 3)
		(end 8.87 3)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.1)
		(end 8.87 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.62)
		(end -1.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.3 4.62)
		(end -1.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 -3.22)
		(end 8.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 4.62)
		(end 0.3 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy 0 4.62)
			(xy 0.44 5.23)
			(xy -0.44 5.23)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.25 -3.6)
		(end 9.25 5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -3.1)
		(end 8.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 3)
		(end 8.75 3)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end -1.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end 8.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.35 4.5)
		(end -1.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.955 -1.138)
		(end -1.138 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.138 -0.955)
		(end -0.955 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.455 -1.138)
		(end 2.362 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.638 -0.955)
		(end 2.545 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 7.955 -1.138)
		(end 5.862 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.138 -0.955)
		(end 6.045 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 -3.1)
		(end 8.75 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 4.5)
		(end -1.35 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_circle
		(center 0 0)
		(end 1.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 3.5 0)
		(end 5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 7 0)
		(end 8.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 3.5 2.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole roundrect (at 0.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "433a7101-4ebd-4d23-832d-6601f17fb410")
    )
    (pad "2" thru_hole circle (at 3.5 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "bc27729f-ed99-48ea-9f11-882870bc95cc")
    )
    (pad "3" thru_hole circle (at 7.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "99c5aba9-ef52-475b-9256-a714a0ce67ba")
    )
  )
  (footprint "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal" (layer "F.Cu") (at 147.000 92.500 0.0)
    (uuid "2d91eb9e-7754-5ee0-bbaa-78b8e7cfdeae")
    (property "Reference" "J7" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "865e7faf-c7df-4faa-8d63-bbfcbe10bfbf")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "Spare" (at 0 1.5 0) (layer "F.Fab")
      (uuid "41d3488d-ebe3-402c-95a9-4145cd12f684")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/0c45da4f-3a65-5906-aac7-f973a0770f80/2d91eb9e-7754-5ee0-bbaa-78b8e7cfdeae")
	(layer "F.Cu")
	(descr "Terminal Block Phoenix PT-1,5-3-3.5-H, 3 pins, pitch 3.5mm, size 10.5x7.6mm, drill diameter 1.2mm, pad diameter 2.4mm, ")
	(tags "THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 10.5x7.6mm drill 1.2mm pad 2.4mm")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.87 -3.22)
		(end 8.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 3)
		(end 8.87 3)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.1)
		(end 8.87 4.1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.87 4.62)
		(end -1.87 -3.22)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.3 4.62)
		(end -1.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 -3.22)
		(end 8.87 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 8.87 4.62)
		(end 0.3 4.62)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy 0 4.62)
			(xy 0.44 5.23)
			(xy -0.44 5.23)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.25 -3.6)
		(end 9.25 5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.75 -3.1)
		(end 8.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 3)
		(end 8.75 3)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end -1.75 -3.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.75 4.1)
		(end 8.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.35 4.5)
		(end -1.75 4.1)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 0.955 -1.138)
		(end -1.138 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.138 -0.955)
		(end -0.955 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.455 -1.138)
		(end 2.362 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 4.638 -0.955)
		(end 2.545 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 7.955 -1.138)
		(end 5.862 0.955)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.138 -0.955)
		(end 6.045 1.138)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 -3.1)
		(end 8.75 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 8.75 4.5)
		(end -1.35 4.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_circle
		(center 0 0)
		(end 1.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 3.5 0)
		(end 5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_circle
		(center 7 0)
		(end 8.5 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 3.5 2.4 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole roundrect (at 0.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "9a2d89c9-4ab1-41c2-81cb-f572bbe9a6f2")
    )
    (pad "2" thru_hole circle (at 3.5 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "a3c4fd0e-5834-4971-8a82-be635d8298b7")
    )
    (pad "3" thru_hole circle (at 7.0 0.0) (size 2.4 2.4) (drill 1.2)
      (layers "*.Cu" "*.Mask")
      (uuid "7b97fcae-b54e-4d1a-9fd0-9d686e900b33")
    )
  )
  (footprint "Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical" (layer "F.Cu") (at 159.000 92.500 0.0)
    (uuid "3ed63cd2-35b1-5028-b7d3-34dfe8bc3ad8")
    (property "Reference" "J10" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "8987e1fe-678c-494c-83c6-d019fc2b583e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "PROG" (at 0 1.5 0) (layer "F.Fab")
      (uuid "0c49bd87-141d-45f5-856b-917f721a61e4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/3ed63cd2-35b1-5028-b7d3-34dfe8bc3ad8")
	(layer "F.Cu")
	(descr "Through hole straight pin header, 1x06, 1.27mm pitch, single row")
	(tags "Through hole pin header THT 1x06 1.27mm single row")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.16 -0.81)
		(end 0 -0.81)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.16 0)
		(end -1.16 -0.81)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.16 0.81)
		(end -1.16 7.095)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.16 0.81)
		(end -0.666708 0.81)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.16 7.095)
		(end -0.317923 7.095)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.317923 7.095)
		(end 1.16 7.095)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.666708 0.81)
		(end 1.16 0.81)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.16 0.81)
		(end 1.16 7.095)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.55 -1.14)
		(end 1.55 7.49)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -0.11)
		(end -0.525 -0.635)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.05 6.985)
		(end -1.05 -0.11)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.525 -0.635)
		(end 1.05 -0.635)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.05 -0.635)
		(end 1.05 6.985)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.05 6.985)
		(end -1.05 6.985)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 3.175 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_PinHeader_1.27mm.3dshapes/PinHeader_1x06_P1.27mm_Vertical.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole rect (at 0.0 0.0) (size 1.0 1.0) (drill 0.65)
      (layers "*.Cu" "*.Mask")
      (uuid "beca6526-a499-42f6-9658-aa8133a4d1d0")
    )
    (pad "2" thru_hole circle (at 0.0 1.27) (size 1.0 1.0) (drill 0.65)
      (layers "*.Cu" "*.Mask")
      (uuid "a8c1e4f1-1e09-4199-a92e-e657d60856ec")
    )
    (pad "3" thru_hole circle (at 0.0 2.54) (size 1.0 1.0) (drill 0.65)
      (layers "*.Cu" "*.Mask")
      (uuid "e1c597b4-e070-49d3-bf8e-9247852393e9")
    )
    (pad "4" thru_hole circle (at 0.0 3.81) (size 1.0 1.0) (drill 0.65)
      (layers "*.Cu" "*.Mask")
      (uuid "45d52a96-e7a3-4ed5-a709-8aa7d33f571d")
    )
    (pad "5" thru_hole circle (at 0.0 5.08) (size 1.0 1.0) (drill 0.65)
      (layers "*.Cu" "*.Mask")
      (uuid "6b5fc6b2-0fd5-4709-be5c-bd8392f4e6da")
    )
    (pad "6" thru_hole circle (at 0.0 6.35) (size 1.0 1.0) (drill 0.65)
      (layers "*.Cu" "*.Mask")
      (uuid "713c0d96-763b-4f2f-b988-0071aa097788")
    )
  )
  (footprint "Package_TO_SOT_SMD:SOT-23-6" (layer "F.Cu") (at 99.000 80.500 0.0)
    (uuid "25b7e4b5-43bd-51b2-8e36-b535ae957f52")
    (property "Reference" "U8" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "3aac45c2-4ec3-4447-bac9-3e476e6dd1de")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "MT3608B" (at 0 1.5 0) (layer "F.Fab")
      (uuid "785fc65c-604b-43ad-acfb-cc5de7f213d9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/25b7e4b5-43bd-51b2-8e36-b535ae957f52")
	(layer "F.Cu")
	(descr "SOT, 6 Pin (JEDEC MO-178 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-178)")
	(tags "SOT TO_SOT_SMD")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.91 -1.56)
		(end 0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 -1.51)
		(end -0.91 -1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.91 1.56)
		(end -0.91 1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 -1.56)
		(end 0.91 -1.51)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.51)
		(end 0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 0.91 1.56)
		(end -0.91 1.56)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_poly
		(pts
			(xy -1.45 -1.51)
			(xy -1.69 -1.84)
			(xy -1.21 -1.84)
		)
		(stroke
			(width 0.12)
			(type solid)
		)
		(fill yes)
		(layer "F.SilkS")
	)
	(fp_line
		(start -2.05 -1.5)
		(end -1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -2.05 1.5)
		(end -2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.7)
		(end 1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 -1.5)
		(end -1.05 -1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.5)
		(end -2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.05 1.7)
		(end -1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.7)
		(end 1.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 -1.5)
		(end 2.05 -1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.5)
		(end 1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 1.05 1.7)
		(end -1.05 1.7)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 -1.5)
		(end 2.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_line
		(start 2.05 1.5)
		(end 1.05 1.5)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
	)
	(fp_poly
		(pts
			(xy -0.4 -1.45)
			(xy 0.8 -1.45)
			(xy 0.8 1.45)
			(xy -0.8 1.45)
			(xy -0.8 -1.05)
		)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 90)
		(layer "F.Fab")
		(effects
			(font
				(size 0.72 0.72)
				(thickness 0.11)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23-6.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -1.1375 -0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "c6659001-fb7d-4008-ade0-aa5af0ea7b20")
    )
    (pad "2" smd roundrect (at -1.1375 0.0) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7517ea03-5c96-477c-8202-3e6d375eca98")
    )
    (pad "3" smd roundrect (at -1.1375 0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5a71a95e-04f4-4e52-b766-4c4e405e9854")
    )
    (pad "4" smd roundrect (at 1.1375 0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "89c36239-9c15-497f-a729-db6fd3773001")
    )
    (pad "5" smd roundrect (at 1.1375 0.0) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "cfbb9ea4-2976-4087-b633-799dfe799b44")
    )
    (pad "6" smd roundrect (at 1.1375 -0.95) (size 1.325 0.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "52a0edc1-d034-477c-ae30-a7e2ab54cba9")
    )
  )
  (footprint "Inductor_SMD:L_Vishay_IFSC-1515AH_4x4x1.8mm" (layer "F.Cu") (at 99.000 72.500 0.0)
    (uuid "317f31df-1848-5529-be08-5f26ac51e510")
    (property "Reference" "L1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "fae82999-ed16-4df5-83f7-dc2705245b1e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4.7uH" (at 0 1.5 0) (layer "F.Fab")
      (uuid "bd8da7ff-2dcd-4a2f-adbf-ac15ced82f77")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/317f31df-1848-5529-be08-5f26ac51e510")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Low Profile, High Current Inductors (https://www.vishay.com/docs/34295/sc15ah01.pdf)")
	(tags "SMD Vishay Inductor Low Profile")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -2 -2.11)
		(end 2 -2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "3641bd9d-7052-4933-ba16-f7829994b97c")
	)
	(fp_line
		(start 2 2.11)
		(end -2 2.11)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e67a83b1-c647-4e1c-866c-8945e1f18e79")
	)
	(fp_line
		(start -2.3 -2.25)
		(end 2.3 -2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4e5e5174-143b-4c40-bdb7-f45f296081cc")
	)
	(fp_line
		(start -2.3 2.25)
		(end -2.3 -2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "ab0a312a-050c-4a06-b493-354f1b4b0c81")
	)
	(fp_line
		(start 2.3 -2.25)
		(end 2.3 2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "fa46bf01-6a9a-4eda-a72d-aeb511326cce")
	)
	(fp_line
		(start 2.3 2.25)
		(end -2.3 2.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "ad97d90e-999e-4e0f-bd58-ad5103fa727f")
	)
	(fp_line
		(start -2 -2)
		(end 2 -2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "351df620-9e2c-46fc-a4ad-3ebbd3efdbad")
	)
	(fp_line
		(start -2 -1.115)
		(end -1.115 -2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "a2585e62-ebd1-4337-88f9-fb40204e8bef")
	)
	(fp_line
		(start -2 2)
		(end -2 -2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "b28cf22f-7d98-47b9-a0ef-cb03c68fc1c7")
	)
	(fp_line
		(start -1.115 2)
		(end -2 1.115)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "5e4635e0-defc-4101-8c2a-55c53010a913")
	)
	(fp_line
		(start 1.115 -2)
		(end 2 -1.115)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1b219655-b0cd-4354-a81c-bf24d2b65dcc")
	)
	(fp_line
		(start 2 -2)
		(end 2 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "ef406bd3-f1a5-4ce0-9156-c8260da74438")
	)
	(fp_line
		(start 2 1.115)
		(end 1.115 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "da55b495-73e7-40f2-b0fa-8c6ff2d9e4f2")
	)
	(fp_line
		(start 2 2)
		(end -2 2)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "6f63711e-4ac7-4269-9110-ec6510063c7b")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(uuid "4c5bca5f-c8a7-4598-a817-c9e28462ef5a")
		(effects
			(font
				(size 0.8 0.8)
				(thickness 0.12)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_Vishay_IFSC-1515AH_4x4x1.8mm.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd rect (at -1.475 0.0) (size 1.15 3.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "87b9b2d7-e99b-476f-a8c2-d1a80da8b486")
    )
    (pad "2" smd rect (at 1.475 0.0) (size 1.15 3.6)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "b2e8bab3-9fe0-4f76-ac76-ff140b2bac0d")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 103.000 76.500 0.0)
    (uuid "0ab162ba-e49c-5e89-8571-5a4794668fb8")
    (property "Reference" "C25" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "2f85db85-0d79-4937-af4a-abffe9fbe30b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "84fceb70-fba0-45b3-bbc3-5415aacb860e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/0ab162ba-e49c-5e89-8571-5a4794668fb8")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "cecc1780-4f69-4524-b6f2-f9d85853cfb8")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "4e98ee5f-99b8-4f3f-bac9-430fda94bd06")
    )
  )
  (footprint "Capacitor_SMD:C_1206_3216Metric" (layer "F.Cu") (at 105.000 80.500 0.0)
    (uuid "62a70714-5fb9-5783-86a6-ba6c8d0c7794")
    (property "Reference" "C20" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "bdc2a98a-6b6d-4046-9ff4-591b55966a7b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "22uF 25V" (at 0 1.5 0) (layer "F.Fab")
      (uuid "53773eab-9374-4503-bcba-d8aa0b0f23a9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/62a70714-5fb9-5783-86a6-ba6c8d0c7794")
	(layer "F.Cu")
	(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.711252 -0.91)
		(end 0.711252 -0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.711252 0.91)
		(end 0.711252 0.91)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -2.3 -1.15)
		(end 2.3 1.15)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1.6 -0.8)
		(end 1.6 0.8)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.8 0.8)
				(thickness 0.12)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -1.475 0.0) (size 1.15 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "9d3106ca-e8d2-48df-875f-2c10f4f2758d")
    )
    (pad "2" smd roundrect (at 1.475 0.0) (size 1.15 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "c21c1617-3822-4f2a-b6ba-33067d5f7f99")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 109.000 80.500 0.0)
    (uuid "6b17f829-9cc5-5cb6-a43e-88230c3ce353")
    (property "Reference" "C22" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "aecefbf7-32ea-4419-bda9-120a00214076")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF 25V" (at 0 1.5 0) (layer "F.Fab")
      (uuid "31278d47-34ba-4283-9c7e-5281576530b4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/6b17f829-9cc5-5cb6-a43e-88230c3ce353")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "cf322324-f78d-4964-8ca2-7ce3d3b279c1")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "5682c47e-2482-4c03-be34-a5d43d251da3")
    )
  )
  (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (at 103.000 74.500 0.0)
    (uuid "73af681e-8e14-58de-8822-3df3f6c45724")
    (property "Reference" "C19" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "a6af6a29-6102-4472-ad82-4d7b93eb9147")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "10uF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "9aeb702b-9345-42b3-a40e-c8454561faa5")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/73af681e-8e14-58de-8822-3df3f6c45724")
	(layer "F.Cu")
	(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.261252 -0.735)
		(end 0.261252 -0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.261252 0.735)
		(end 0.261252 0.735)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.7 -0.98)
		(end 1.7 0.98)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -1 -0.625)
		(end 1 0.625)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.5 0.5)
				(thickness 0.08)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7e77a831-f9d9-4972-a2a0-9e2340a4acb9")
    )
    (pad "2" smd roundrect (at 0.95 0.0) (size 1.0 1.45)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "106e9860-8037-402f-93c7-813cdfed28fb")
    )
  )
  (footprint "Diode_SMD:D_SMA" (layer "F.Cu") (at 109.000 76.500 0.0)
    (uuid "7a9f5922-3b3e-5099-ac8f-84673a6f857c")
    (property "Reference" "D11" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "55746506-2dc2-4b20-bca4-7178c28e5593")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SMAJ13" (at 0 1.5 0) (layer "F.Fab")
      (uuid "8b467b1b-69c6-4cf1-b260-93395f7f2941")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/7a9f5922-3b3e-5099-ac8f-84673a6f857c")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "Diode SMA (DO-214AC)")
	(tags "Diode SMA (DO-214AC)")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.51 -1.65)
		(end -3.51 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "da16a37e-07f2-4567-a6c8-ff0f60acb412")
	)
	(fp_line
		(start -3.51 -1.65)
		(end 2 -1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "53fd5ede-59c7-4c1a-a238-96e9dddba307")
	)
	(fp_line
		(start -3.51 1.65)
		(end 2 1.65)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "dff34e10-67ca-4b77-95c8-838244782165")
	)
	(fp_line
		(start -3.5 -1.75)
		(end 3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "dbd4b25f-4fcb-4744-84be-c5e4a4e42837")
	)
	(fp_line
		(start -3.5 1.75)
		(end -3.5 -1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "2dd2626e-6f74-400d-9266-48b047137055")
	)
	(fp_line
		(start 3.5 -1.75)
		(end 3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "4ca79e24-2e7b-47bd-871d-fec997d695df")
	)
	(fp_line
		(start 3.5 1.75)
		(end -3.5 1.75)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "d08df98a-2ea9-4491-a654-062a8028f290")
	)
	(fp_line
		(start -2.3 1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1431ae02-b3a1-4485-9ca0-26bc320a78c5")
	)
	(fp_line
		(start -0.64944 -0.79908)
		(end -0.64944 0.80112)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "0f99da12-e271-4d4a-8797-6ea6343d195d")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end -1.55114 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f7a8c838-49b4-4488-a08e-d89eb3dc4361")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d558df36-f3a4-4fcf-8ea7-9ca3c5a228aa")
	)
	(fp_line
		(start -0.64944 0.00102)
		(end 0.50118 0.75032)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d55225e2-3236-4507-bfd9-80a48f293c40")
	)
	(fp_line
		(start 0.50118 0.00102)
		(end 1.4994 0.00102)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "46fe74cf-81ca-444c-a727-666d0e34a994")
	)
	(fp_line
		(start 0.50118 0.75032)
		(end 0.50118 -0.79908)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7c1208d5-7637-4920-8943-369f975b8a74")
	)
	(fp_line
		(start 2.3 -1.5)
		(end -2.3 -1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "657b2a01-37ca-4d3c-8004-a75e08aa2032")
	)
	(fp_line
		(start 2.3 -1.5)
		(end 2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "d13e07f1-e4fe-4d02-b51c-871844057f50")
	)
	(fp_line
		(start 2.3 1.5)
		(end -2.3 1.5)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "f849bb85-eee3-44d9-b881-7f1627d4304a")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -2.5 0)
		(layer "F.Fab")
		(uuid "84118230-d2f4-4bb3-819b-e1cb088384b6")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "f7c7b353-9ab8-4c6c-a5b0-92a5d213eb4f")
    )
    (pad "2" smd roundrect (at 2.0 0.0) (size 2.5 1.8)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1b8152d7-5939-4c7d-b059-6caf66526054")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 99.000 76.500 0.0)
    (uuid "c235980f-e3c8-58a5-95b7-91c63def1beb")
    (property "Reference" "R23" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "f1f607d4-20e9-4b5a-86e8-d117b98e5d85")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1.91M" (at 0 1.5 0) (layer "F.Fab")
      (uuid "617d6c28-28fe-4785-a9b0-fcddc4d07c43")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/c235980f-e3c8-58a5-95b7-91c63def1beb")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "20f57314-6bba-4605-a84d-d6e51d70a49f")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7a80332d-9791-4685-850d-ccc0534dc1f8")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 105.000 76.500 0.0)
    (uuid "0872ae9d-a6fa-5563-89b1-e97278e4472e")
    (property "Reference" "R24" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "e83fb0f3-19db-4184-961c-a48227c39465")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100k" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f05ba8f4-935a-4640-9e90-2ae3e676ebad")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/0872ae9d-a6fa-5563-89b1-e97278e4472e")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "7781646b-cf13-46a4-8405-293653dfcede")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "30270c0e-47b6-474c-8d26-f9613e9c5b1c")
    )
  )
  (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (at 111.000 78.500 0.0)
    (uuid "cedfcc6e-ed32-5582-b9f5-566c0a951132")
    (property "Reference" "C21" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "9204a79e-7fe7-4e99-9c3c-05a92e999459")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "100nF" (at 0 1.5 0) (layer "F.Fab")
      (uuid "8c65f60e-715e-4d9b-ad93-af114eac3e68")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/64fba67a-e021-5c3c-b6fb-14c5c55ee35f/cedfcc6e-ed32-5582-b9f5-566c0a951132")
	(layer "F.Cu")
	(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "capacitor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.107836 -0.36)
		(end 0.107836 -0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.107836 0.36)
		(end 0.107836 0.36)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.91 -0.46)
		(end 0.91 0.46)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.5 -0.25)
		(end 0.5 0.25)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.25 0.25)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "1047d918-2a2d-4177-a6e0-f955de35d60c")
    )
    (pad "2" smd roundrect (at 0.48 0.0) (size 0.56 0.62)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "0ee8a005-f7eb-402c-b498-42f7960207bb")
    )
  )
  (footprint "Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm" (layer "F.Cu") (at 123.000 84.500 0.0)
    (uuid "5a0bedfa-693f-5398-9fbc-dd5495bd822c")
    (property "Reference" "SJ1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "50d868d8-bc8a-4814-a1d6-a26fcd297673")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "VBOOST" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f37b2447-b76c-4c1c-9e55-7146f689ec67")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/5a0bedfa-693f-5398-9fbc-dd5495bd822c")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open")
	(tags "solder jumper open")
	(zone_connect 1)
	(attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_rect
		(start -0.15 -0.75)
		(end 0.15 0.75)
		(stroke
			(width 0)
			(type default)
		)
		(fill yes)
		(layer "F.Mask")
		(uuid "3b5e2732-2a4c-4917-b09e-a67ffc4435d7")
	)
	(fp_line
		(start -1.4 -1)
		(end 1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "8836b64e-369e-4f15-96a2-8a1544e9b710")
	)
	(fp_line
		(start -1.4 1)
		(end -1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2b78501f-9740-4fac-a533-e8eeb064d3d8")
	)
	(fp_line
		(start 1.4 -1)
		(end 1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bef3ac59-f4df-486e-ae42-6082ded2534b")
	)
	(fp_line
		(start 1.4 1)
		(end -1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "0afca7c1-a1da-4c94-baed-c05f52325e81")
	)
	(fp_line
		(start -1.65 -1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "cd488bed-8cd4-4cfb-b5d4-35466b1cd694")
	)
	(fp_line
		(start -1.65 -1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e522d62-2040-4627-b73c-ae2bc7b5c9a4")
	)
	(fp_line
		(start 1.65 1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "80727963-3592-4046-a0ca-c28e2e012625")
	)
	(fp_line
		(start 1.65 1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e939036-bb28-43e0-a5a9-2b1fa0e13751")
	)
	(embedded_fonts no)
    (pad "1" smd rect (at -0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "f5d1ed40-4389-4b2f-8b12-4d04a3f90dca")
    )
    (pad "2" smd rect (at 0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "4f692e30-9213-4d6a-9dc5-97272e749ec2")
    )
  )
  (footprint "Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm" (layer "F.Cu") (at 127.000 84.500 0.0)
    (uuid "998c751a-d428-5ed6-87cb-836cec5d3b90")
    (property "Reference" "SJ2" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "12850102-3559-4e91-9db2-6f830089b01e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "VLOOP" (at 0 1.5 0) (layer "F.Fab")
      (uuid "5b4e877e-1646-4476-8652-40961ee6bdf4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/998c751a-d428-5ed6-87cb-836cec5d3b90")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open")
	(tags "solder jumper open")
	(zone_connect 1)
	(attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_rect
		(start -0.15 -0.75)
		(end 0.15 0.75)
		(stroke
			(width 0)
			(type default)
		)
		(fill yes)
		(layer "F.Mask")
		(uuid "3b5e2732-2a4c-4917-b09e-a67ffc4435d7")
	)
	(fp_line
		(start -1.4 -1)
		(end 1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "8836b64e-369e-4f15-96a2-8a1544e9b710")
	)
	(fp_line
		(start -1.4 1)
		(end -1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2b78501f-9740-4fac-a533-e8eeb064d3d8")
	)
	(fp_line
		(start 1.4 -1)
		(end 1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bef3ac59-f4df-486e-ae42-6082ded2534b")
	)
	(fp_line
		(start 1.4 1)
		(end -1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "0afca7c1-a1da-4c94-baed-c05f52325e81")
	)
	(fp_line
		(start -1.65 -1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "cd488bed-8cd4-4cfb-b5d4-35466b1cd694")
	)
	(fp_line
		(start -1.65 -1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e522d62-2040-4627-b73c-ae2bc7b5c9a4")
	)
	(fp_line
		(start 1.65 1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "80727963-3592-4046-a0ca-c28e2e012625")
	)
	(fp_line
		(start 1.65 1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e939036-bb28-43e0-a5a9-2b1fa0e13751")
	)
	(embedded_fonts no)
    (pad "1" smd rect (at -0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "ada36d34-1a2a-48f1-8d5e-56da50f3203c")
    )
    (pad "2" smd rect (at 0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "68c201e0-02f9-49b8-9496-6289955e0872")
    )
  )
  (footprint "Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm" (layer "F.Cu") (at 131.000 84.500 0.0)
    (uuid "9b1dbc13-4d9b-510b-9a63-d0a618984478")
    (property "Reference" "SJ3" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "bc3a8296-2869-47f5-8d05-586f574d24f6")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "LED_DIS" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f9dd2a31-dbe2-4add-b29c-7dce48ac53e9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/9b1dbc13-4d9b-510b-9a63-d0a618984478")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open")
	(tags "solder jumper open")
	(zone_connect 1)
	(attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_rect
		(start -0.15 -0.75)
		(end 0.15 0.75)
		(stroke
			(width 0)
			(type default)
		)
		(fill yes)
		(layer "F.Mask")
		(uuid "3b5e2732-2a4c-4917-b09e-a67ffc4435d7")
	)
	(fp_line
		(start -1.4 -1)
		(end 1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "8836b64e-369e-4f15-96a2-8a1544e9b710")
	)
	(fp_line
		(start -1.4 1)
		(end -1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2b78501f-9740-4fac-a533-e8eeb064d3d8")
	)
	(fp_line
		(start 1.4 -1)
		(end 1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bef3ac59-f4df-486e-ae42-6082ded2534b")
	)
	(fp_line
		(start 1.4 1)
		(end -1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "0afca7c1-a1da-4c94-baed-c05f52325e81")
	)
	(fp_line
		(start -1.65 -1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "cd488bed-8cd4-4cfb-b5d4-35466b1cd694")
	)
	(fp_line
		(start -1.65 -1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e522d62-2040-4627-b73c-ae2bc7b5c9a4")
	)
	(fp_line
		(start 1.65 1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "80727963-3592-4046-a0ca-c28e2e012625")
	)
	(fp_line
		(start 1.65 1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e939036-bb28-43e0-a5a9-2b1fa0e13751")
	)
	(embedded_fonts no)
    (pad "1" smd rect (at -0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "5e67d240-bcde-4179-bb83-bc666030ebd4")
    )
    (pad "2" smd rect (at 0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "a6273a81-20d1-4cdd-8e73-c7b7f16811f6")
    )
  )
  (footprint "Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm" (layer "F.Cu") (at 123.000 80.500 0.0)
    (uuid "2a36a959-27a0-55ce-9ee2-811dba60018d")
    (property "Reference" "SJ4" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "edece0a9-b786-482f-b7bd-4f1748230259")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "UART_TX" (at 0 1.5 0) (layer "F.Fab")
      (uuid "1a8f0ed3-832f-4c79-9c55-dd110d5e1bfb")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/2a36a959-27a0-55ce-9ee2-811dba60018d")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open")
	(tags "solder jumper open")
	(zone_connect 1)
	(attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_rect
		(start -0.15 -0.75)
		(end 0.15 0.75)
		(stroke
			(width 0)
			(type default)
		)
		(fill yes)
		(layer "F.Mask")
		(uuid "3b5e2732-2a4c-4917-b09e-a67ffc4435d7")
	)
	(fp_line
		(start -1.4 -1)
		(end 1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "8836b64e-369e-4f15-96a2-8a1544e9b710")
	)
	(fp_line
		(start -1.4 1)
		(end -1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2b78501f-9740-4fac-a533-e8eeb064d3d8")
	)
	(fp_line
		(start 1.4 -1)
		(end 1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bef3ac59-f4df-486e-ae42-6082ded2534b")
	)
	(fp_line
		(start 1.4 1)
		(end -1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "0afca7c1-a1da-4c94-baed-c05f52325e81")
	)
	(fp_line
		(start -1.65 -1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "cd488bed-8cd4-4cfb-b5d4-35466b1cd694")
	)
	(fp_line
		(start -1.65 -1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e522d62-2040-4627-b73c-ae2bc7b5c9a4")
	)
	(fp_line
		(start 1.65 1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "80727963-3592-4046-a0ca-c28e2e012625")
	)
	(fp_line
		(start 1.65 1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e939036-bb28-43e0-a5a9-2b1fa0e13751")
	)
	(embedded_fonts no)
    (pad "1" smd rect (at -0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "76d66cdc-df6b-46d2-b10b-9ac1ae31591c")
    )
    (pad "2" smd rect (at 0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "d7066987-88f7-47f2-bbf6-3631a0885c70")
    )
  )
  (footprint "Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm" (layer "F.Cu") (at 127.000 80.500 0.0)
    (uuid "1eb46d8f-19a1-53f7-a846-b72b89bfb2e6")
    (property "Reference" "SJ5" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "4029fc38-a56c-41ed-ae74-69fb1803a729")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "UART_RX" (at 0 1.5 0) (layer "F.Fab")
      (uuid "14decc00-bf48-4934-ad98-adccfcfeca1b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/1eb46d8f-19a1-53f7-a846-b72b89bfb2e6")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open")
	(tags "solder jumper open")
	(zone_connect 1)
	(attr exclude_from_pos_files exclude_from_bom allow_soldermask_bridges)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_rect
		(start -0.15 -0.75)
		(end 0.15 0.75)
		(stroke
			(width 0)
			(type default)
		)
		(fill yes)
		(layer "F.Mask")
		(uuid "3b5e2732-2a4c-4917-b09e-a67ffc4435d7")
	)
	(fp_line
		(start -1.4 -1)
		(end 1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "8836b64e-369e-4f15-96a2-8a1544e9b710")
	)
	(fp_line
		(start -1.4 1)
		(end -1.4 -1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "2b78501f-9740-4fac-a533-e8eeb064d3d8")
	)
	(fp_line
		(start 1.4 -1)
		(end 1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "bef3ac59-f4df-486e-ae42-6082ded2534b")
	)
	(fp_line
		(start 1.4 1)
		(end -1.4 1)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "0afca7c1-a1da-4c94-baed-c05f52325e81")
	)
	(fp_line
		(start -1.65 -1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "cd488bed-8cd4-4cfb-b5d4-35466b1cd694")
	)
	(fp_line
		(start -1.65 -1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e522d62-2040-4627-b73c-ae2bc7b5c9a4")
	)
	(fp_line
		(start 1.65 1.25)
		(end -1.65 1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "80727963-3592-4046-a0ca-c28e2e012625")
	)
	(fp_line
		(start 1.65 1.25)
		(end 1.65 -1.25)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "5e939036-bb28-43e0-a5a9-2b1fa0e13751")
	)
	(embedded_fonts no)
    (pad "1" smd rect (at -0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "a0a42a98-b37b-45eb-9700-04095beb10dd")
    )
    (pad "2" smd rect (at 0.65 0.0) (size 1.0 1.5)
      (layers "F.Cu" "F.Mask")
      (uuid "ecbfcb31-fed8-4090-a5c9-e46592c770b8")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 119.000 82.500 0.0)
    (uuid "8831fd34-e9e3-5d9e-9ffd-98feed6b8c0a")
    (property "Reference" "R9" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "1d4d5387-bd59-46f4-9ccc-3988b0d469ab")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4k7" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ea85eb90-f5c1-417f-b896-136a1b835335")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/8831fd34-e9e3-5d9e-9ffd-98feed6b8c0a")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "177411b0-4464-4413-b8b5-7bb2a10b3b6d")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "2fd04093-0d7d-46aa-b14e-53ed8b493ea5")
    )
  )
  (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (at 119.000 78.500 0.0)
    (uuid "cc2f3bc0-23d2-5d49-8e65-bf5827c1df04")
    (property "Reference" "R10" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "9e6c3fdb-1a0c-419a-9850-c3882e9f2c3a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "4k7" (at 0 1.5 0) (layer "F.Fab")
      (uuid "816eb0de-3242-43d9-8da1-03ba00901e8d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/cc2f3bc0-23d2-5d49-8e65-bf5827c1df04")
	(layer "F.Cu")
	(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
	(tags "resistor")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.153641 -0.38)
		(end 0.153641 -0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -0.153641 0.38)
		(end 0.153641 0.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -0.93 -0.47)
		(end 0.93 0.47)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_rect
		(start -0.525 -0.27)
		(end 0.525 0.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(fill no)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 0)
		(layer "F.Fab")
		(effects
			(font
				(size 0.26 0.26)
				(thickness 0.04)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd roundrect (at -0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "182a49c4-5057-4a69-a377-846219f3b703")
    )
    (pad "2" smd roundrect (at 0.51 0.0) (size 0.54 0.64)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "3004c395-4876-4dd0-9e28-0e6684ac8cde")
    )
  )
  (footprint "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" (layer "F.Cu") (at 265.000 246.500 0.0)
    (uuid "ef0ac8b9-2f7d-5de6-ac49-54ffb925d99a")
    (property "Reference" "J8" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "a34f9ef3-d503-4a70-b900-82d727a85aff")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "I2C" (at 0 1.5 0) (layer "F.Fab")
      (uuid "241a9dfb-419b-4c05-a657-1d370f6312a9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/ef0ac8b9-2f7d-5de6-ac49-54ffb925d99a")
	(layer "F.Cu")
	(descr "Through hole straight pin header, 1x04, 2.54mm pitch, single row")
	(tags "Through hole pin header THT 1x04 2.54mm single row")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.38 -1.38)
		(end 0 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 0)
		(end -1.38 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end -1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end 1.38 1.27)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 9)
		(end 1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.38 1.27)
		(end 1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.77 -1.77)
		(end 1.77 9.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.27 -0.635)
		(end -0.635 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.27 8.89)
		(end -1.27 -0.635)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.635 -1.27)
		(end 1.27 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 -1.27)
		(end 1.27 8.89)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 8.89)
		(end -1.27 8.89)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 3.81 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x04_P2.54mm_Vertical.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole rect (at 0.0 0.0) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "8d53009a-1869-41a9-b8e4-1f6b397acdaa")
    )
    (pad "2" thru_hole circle (at 0.0 2.54) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "8fb3cb2d-e394-4a7f-8b4c-d610a2c62ec1")
    )
    (pad "3" thru_hole circle (at 0.0 5.08) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "7adb8e63-b876-4e2e-a0b0-8537a8bba6a9")
    )
    (pad "4" thru_hole circle (at 0.0 7.62) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "ccfba30f-2a57-41b1-8b7c-b8b1a3c60956")
    )
  )
  (footprint "Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical" (layer "F.Cu") (at 265.000 256.500 0.0)
    (uuid "ecfff79c-808c-51b2-afa3-0714fae96e6a")
    (property "Reference" "J9" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "107566b9-6bbc-4e72-b46b-d9589adde0b9")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "GPIO" (at 0 1.5 0) (layer "F.Fab")
      (uuid "43e4da0b-fdeb-4cab-b77e-b5bc4a5bf506")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/ecfff79c-808c-51b2-afa3-0714fae96e6a")
	(layer "F.Cu")
	(descr "Through hole straight pin header, 1x08, 2.54mm pitch, single row")
	(tags "Through hole pin header THT 1x08 2.54mm single row")
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.38 -1.38)
		(end 0 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 0)
		(end -1.38 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end -1.38 19.16)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end 1.38 1.27)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 19.16)
		(end 1.38 19.16)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.38 1.27)
		(end 1.38 19.16)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.77 -1.77)
		(end 1.77 19.55)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.27 -0.635)
		(end -0.635 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.27 19.05)
		(end -1.27 -0.635)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.635 -1.27)
		(end 1.27 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 -1.27)
		(end 1.27 19.05)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 19.05)
		(end -1.27 19.05)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 8.89 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x08_P2.54mm_Vertical.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" thru_hole rect (at 0.0 0.0) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "9ae9ea85-56c9-4741-951c-bfb4bb9d539d")
    )
    (pad "2" thru_hole circle (at 0.0 2.54) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "e74e685a-078d-4986-8787-40ddc27275af")
    )
    (pad "3" thru_hole circle (at 0.0 5.08) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "2b6f03f0-e1e6-4924-b0c8-3bce3c2ce83c")
    )
    (pad "4" thru_hole circle (at 0.0 7.62) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "3cb0b768-394f-4968-bebc-975136bf7098")
    )
    (pad "5" thru_hole circle (at 0.0 10.16) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "03f96181-afee-45f5-bf48-5b90d638d11a")
    )
    (pad "6" thru_hole circle (at 0.0 12.7) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "19305c54-e48d-46bc-8a1b-ef512a6a770f")
    )
    (pad "7" thru_hole circle (at 0.0 15.24) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "42c251ea-3144-4577-9602-1ca69a519855")
    )
    (pad "8" thru_hole circle (at 0.0 17.78) (size 1.7 1.7) (drill 1.0)
      (layers "*.Cu" "*.Mask")
      (uuid "bfcae9d1-3d4d-42a3-a93e-cee54559b76d")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 81.000 72.500 0.0)
    (uuid "87303134-bb22-5fd0-9e2d-72ce37dd0ed8")
    (property "Reference" "TP1" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "1d535414-2b98-4b0f-a633-2f723b33039f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "VBAT" (at 0 1.5 0) (layer "F.Fab")
      (uuid "19000b7d-2bd4-4fdc-a544-72daaf5240a8")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/87303134-bb22-5fd0-9e2d-72ce37dd0ed8")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "8003974c-fccb-4592-a1a5-0e15f9a9d20b")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 95.000 70.500 0.0)
    (uuid "4129a6b2-2611-5726-a688-44919036792e")
    (property "Reference" "TP2" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "7520667f-9324-40b3-9139-95dc52036eab")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "VLOOP" (at 0 1.5 0) (layer "F.Fab")
      (uuid "2456e0fc-5027-4638-a119-c80eb942551f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/4129a6b2-2611-5726-a688-44919036792e")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "72624574-3a38-4926-95be-5bfaaa976269")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 85.000 72.500 0.0)
    (uuid "8adeca66-b46c-58ea-be4f-278f849b4408")
    (property "Reference" "TP3" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "0942a81e-aefe-4e5e-ae6f-d10ef5645cc3")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "+3V3" (at 0 1.5 0) (layer "F.Fab")
      (uuid "a37f0aad-cedd-44c0-b672-08211bc2b5ac")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/8adeca66-b46c-58ea-be4f-278f849b4408")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "e6e31480-a287-4c85-b863-49e79391dd01")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 89.000 72.500 0.0)
    (uuid "b3a43193-220a-5278-9e71-26ff65b69617")
    (property "Reference" "TP4" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "120208a2-f813-480e-a142-f215dc363ede")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "GND" (at 0 1.5 0) (layer "F.Fab")
      (uuid "56e28121-0691-4787-a9da-8e25bb290155")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/b3a43193-220a-5278-9e71-26ff65b69617")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "e20c3735-b0c9-4989-ba75-9cd26de91ae9")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 149.000 78.500 0.0)
    (uuid "c71a4a16-44da-5f09-aa83-b2b60b21d1d3")
    (property "Reference" "TP5" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "c63275c2-8ee1-4f71-88dd-f22b8147593e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "LOOP1" (at 0 1.5 0) (layer "F.Fab")
      (uuid "baa3e489-bc49-417b-baac-a1a4b82a1a07")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/c71a4a16-44da-5f09-aa83-b2b60b21d1d3")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "3a0c0be3-f782-4bd1-84af-96b014f6c507")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 161.000 78.500 0.0)
    (uuid "aa1fc3f0-99aa-5a4d-bc85-73c3aa90cd0f")
    (property "Reference" "TP6" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "a22fafbf-15a4-433c-8a21-d394b396c8ff")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "LOOP2" (at 0 1.5 0) (layer "F.Fab")
      (uuid "ae16a219-bb55-4156-9800-6c874473d397")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/aa1fc3f0-99aa-5a4d-bc85-73c3aa90cd0f")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "4b130700-94bc-4cb3-87bf-c8b7fd4c3e11")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 137.000 96.500 0.0)
    (uuid "dfd0b73c-7c08-51fe-97a6-0104c5515e58")
    (property "Reference" "TP7" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "20d5e690-009d-4892-b533-d3ad3c15472f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "1WIRE" (at 0 1.5 0) (layer "F.Fab")
      (uuid "834590b0-1a32-4926-b185-a737852888bb")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/dfd0b73c-7c08-51fe-97a6-0104c5515e58")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "83615a03-8d08-4896-8ac8-7e9ee60bda77")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 119.000 66.500 0.0)
    (uuid "94f91907-7a9f-5c25-b7f0-726617481b5f")
    (property "Reference" "TP8" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "24ffaa56-c403-4b6f-9179-a34e22fd1547")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SDA" (at 0 1.5 0) (layer "F.Fab")
      (uuid "eae01ba6-80ea-4f05-8af0-a40b45d49557")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/94f91907-7a9f-5c25-b7f0-726617481b5f")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "aa55809d-8bf4-4cde-a5be-f207279d822f")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 123.000 66.500 0.0)
    (uuid "4d787b79-b348-5ad7-8942-8de1d7d62d6d")
    (property "Reference" "TP9" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "5f472635-1aa9-4a52-b417-43670bc9f361")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "SCL" (at 0 1.5 0) (layer "F.Fab")
      (uuid "f7be77fa-6c90-44c7-9e9b-7301b2640173")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/4d787b79-b348-5ad7-8942-8de1d7d62d6d")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "aa28b384-4982-47f0-9dbd-4944e21af669")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 87.000 96.500 0.0)
    (uuid "0680bd0a-f95c-5c4b-ba01-80569c971ad7")
    (property "Reference" "TP10" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "3ee9a137-3073-408d-8350-c9a41919bc36")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "VSOLAR" (at 0 1.5 0) (layer "F.Fab")
      (uuid "e5561992-fc2d-4229-9428-20f142cf061f")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/0680bd0a-f95c-5c4b-ba01-80569c971ad7")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "7847ae81-51ab-49b7-990a-7352fc0dee37")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 71.000 96.500 0.0)
    (uuid "4481f1e4-5681-5af8-bc30-ef7cc6a1866b")
    (property "Reference" "TP11" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "4ea636e3-76d5-41b2-a53e-2f96aa385fbf")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "VBAT_RAW" (at 0 1.5 0) (layer "F.Fab")
      (uuid "c5138db4-6b0e-4fc2-8cc5-39d3e1e2a75d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/4481f1e4-5681-5af8-bc30-ef7cc6a1866b")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "766fde5f-fdc8-419d-ab7a-78c6ce6ef0f1")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 121.000 64.500 0.0)
    (uuid "08d4bc62-bc26-5622-8fae-7553cf57e1a7")
    (property "Reference" "TP12" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "51f84d74-3e62-449c-832c-98ede93f1d8e")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "ADS_DRDY" (at 0 1.5 0) (layer "F.Fab")
      (uuid "a508bf0e-00c1-471e-8381-ca7d5286dd3d")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/08d4bc62-bc26-5622-8fae-7553cf57e1a7")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "38a26819-55ec-4c6b-abd1-7bc7d5a5fcd1")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 73.000 66.500 0.0)
    (uuid "7fc6ad76-2f8f-5c46-897e-a2ae89aeae56")
    (property "Reference" "TP14" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "2f8aeeeb-438c-4fa3-8d67-d44a4271b3af")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "CHRG_SOL" (at 0 1.5 0) (layer "F.Fab")
      (uuid "8c7166e7-585c-41c5-bfda-f9c8f118be6a")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/7fc6ad76-2f8f-5c46-897e-a2ae89aeae56")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "cd58053c-1a5f-435c-a08e-d09a73e3730d")
    )
  )
  (footprint "TestPoint:TestPoint_Pad_1.0x1.0mm" (layer "F.Cu") (at 101.000 96.500 0.0)
    (uuid "97c24f72-af40-5fc7-be2a-b95f7b614f7a")
    (property "Reference" "TP15" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "79735c99-ee7b-4a75-8072-b67bae05aa54")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "CHRG_USB" (at 0 1.5 0) (layer "F.Fab")
      (uuid "112265e7-f47e-471e-a3ed-51c067053a91")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/97c24f72-af40-5fc7-be2a-b95f7b614f7a")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "SMD rectangular pad as test Point, square 1.0mm side length")
	(tags "test point SMD pad rectangle square")
	(attr exclude_from_pos_files exclude_from_bom)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -0.7 -0.7)
		(end 0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "b46a75bc-6fc3-4af9-9151-20c53a6eb936")
	)
	(fp_line
		(start -0.7 0.7)
		(end -0.7 -0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "56469ec3-4260-4bfd-be6e-801e1a3f2762")
	)
	(fp_line
		(start 0.7 -0.7)
		(end 0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "82dd0b2d-a4ef-4d5e-b165-e033c969fa3d")
	)
	(fp_line
		(start 0.7 0.7)
		(end -0.7 0.7)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "e39484a4-5cbf-4adf-b271-2168d7e0f645")
	)
	(fp_line
		(start -1 -1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "f5ce72f9-16a2-44eb-9fb0-dd6b06181714")
	)
	(fp_line
		(start -1 -1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "763e2beb-ec05-429e-97a1-9f865cc85d06")
	)
	(fp_line
		(start 1 1)
		(end -1 1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "17be16ce-9017-475b-9240-12e70665b829")
	)
	(fp_line
		(start 1 1)
		(end 1 -1)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "64318e0f-09d7-4b24-aa3d-4735d2d01289")
	)
	(fp_text user "${REFERENCE}"
		(at 0 -1.45 0)
		(layer "F.Fab")
		(uuid "2db9ed6b-9c42-4990-8b32-fddeb89b4566")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
    (pad "1" smd rect (at 0.0 0.0) (size 1.0 1.0)
      (layers "F.Cu" "F.Mask")
      (uuid "501cb61c-0b98-42da-93e8-391f2f5216de")
    )
  )
  (footprint "Connector_Coaxial:SMA_Amphenol_132289_EdgeMount" (layer "F.Cu") (at 115.000 46.500 90.0)
    (uuid "0b0bc11a-50d1-592e-9a41-94ae0170eca7")
    (property "Reference" "J3" (at 0 -1.5 0) (layer "F.SilkS")
      (uuid "6964408b-cfca-41ae-86e4-be6440496bd4")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (property "Value" "132289" (at 0 1.5 0) (layer "F.Fab")
      (uuid "9a366781-15f9-4ed2-9d27-85755d47c23b")
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (path "/605e54e1-9b70-5889-bd12-97a0469e9e42/0b0bc11a-50d1-592e-9a41-94ae0170eca7")
	(generator_version "10.0")
	(layer "F.Cu")
	(descr "https://www.amphenolrf.com/library/download/link/link_id/595984/parent/132289/")
	(tags "SMA")
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -3.71 -0.25)
		(end -3.71 0.25)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "a8a5de4f-3967-4d32-9150-3e9539a04827")
	)
	(fp_line
		(start -3.71 0.25)
		(end -3.21 0)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "ff4857a2-2967-4b13-83af-8608532d1892")
	)
	(fp_line
		(start -3.21 0)
		(end -3.71 -0.25)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
		(uuid "429bd226-2466-4387-abea-8a6984eabf89")
	)
	(fp_line
		(start -3.04 5.58)
		(end -3.04 -5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "B.CrtYd")
		(uuid "596bec7f-7747-45d4-920c-c0bcb7cc73b6")
	)
	(fp_line
		(start 14.47 -5.58)
		(end -3.04 -5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "B.CrtYd")
		(uuid "0ba54b7c-3488-4f16-a739-bbcd34f297b7")
	)
	(fp_line
		(start 14.47 -5.58)
		(end 14.47 5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "B.CrtYd")
		(uuid "49f1d1aa-c97a-44e9-a265-b0c42a14a888")
	)
	(fp_line
		(start 14.47 5.58)
		(end -3.04 5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "B.CrtYd")
		(uuid "96ca2972-f3bf-4738-94a6-9d16427b4c79")
	)
	(fp_line
		(start -3.04 5.58)
		(end -3.04 -5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "173a018c-b727-4a84-985e-a43622b25c79")
	)
	(fp_line
		(start 14.47 -5.58)
		(end -3.04 -5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "85ae53a7-e6b4-4e2c-bf75-98842d3844d1")
	)
	(fp_line
		(start 14.47 -5.58)
		(end 14.47 5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "9aa39683-a858-4dfa-b58d-6a3faa0f26cb")
	)
	(fp_line
		(start 14.47 5.58)
		(end -3.04 5.58)
		(stroke
			(width 0.05)
			(type solid)
		)
		(layer "F.CrtYd")
		(uuid "aca9db6d-2ca4-4418-8034-14c5db5d2163")
	)
	(fp_line
		(start -1.91 -5.08)
		(end -1.91 -3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "82f554d8-67cd-404c-a4ec-3b7e5ab54aaa")
	)
	(fp_line
		(start -1.91 -5.08)
		(end 4.445 -5.08)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "9f2e0967-b586-4a69-9e6b-1dc5af271e65")
	)
	(fp_line
		(start -1.91 -3.81)
		(end 2.54 -3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "0a1c6cb2-8f82-4ae4-9456-c799bcc1b950")
	)
	(fp_line
		(start -1.91 3.81)
		(end -1.91 5.08)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1d0abd41-ccd2-4891-8446-b0d628958563")
	)
	(fp_line
		(start -1.91 5.08)
		(end 4.445 5.08)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "87e2c783-de39-4ce9-aebe-d21ab94cb7fb")
	)
	(fp_line
		(start 2.54 -3.81)
		(end 2.54 3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "be4666ce-00fd-4b54-87a1-d84be309896c")
	)
	(fp_line
		(start 2.54 -0.75)
		(end 3.54 0)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "6f7f0d08-50ad-4054-971f-19b5f639d1b7")
	)
	(fp_line
		(start 2.54 3.81)
		(end -1.91 3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "1f419d1f-81fe-4b99-a36b-ac3277caee8f")
	)
	(fp_line
		(start 3.54 0)
		(end 2.54 0.75)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "ae2eba48-7c4e-4f34-a074-450b3f163f43")
	)
	(fp_line
		(start 4.445 -3.81)
		(end 4.445 -5.08)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "fd3f31d3-00b8-442e-a9bc-c4bf6e606909")
	)
	(fp_line
		(start 4.445 -3.81)
		(end 13.97 -3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "79b81378-9713-4a35-9213-93c4bfeeda52")
	)
	(fp_line
		(start 4.445 5.08)
		(end 4.445 3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "a51a2b09-e434-4187-98cb-e9750d54bb99")
	)
	(fp_line
		(start 13.97 -3.81)
		(end 13.97 3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "7cbb162c-eb35-48a0-a634-b52f84b3c667")
	)
	(fp_line
		(start 13.97 3.81)
		(end 4.445 3.81)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
		(uuid "560e44c4-3b08-4160-8962-c9c3a6669bd4")
	)
	(fp_text user "${REFERENCE}"
		(at 4.79 0 270)
		(layer "F.Fab")
		(uuid "8279bbc4-aa56-4a30-9a3c-ddc691d67891")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Connector_Coaxial.3dshapes/SMA_Amphenol_132289_EdgeMount.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
    (pad "1" smd rect (at 0.0 0.0 90.0) (size 1.5 5.08)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "459772fc-f070-4a14-bcb5-686dbde56f39")
    )
    (pad "2" smd rect (at 0.0 -4.25 90.0) (size 1.5 5.08)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "01051651-835e-43ad-9678-b359bae43c08")
    )
    (pad "2" smd rect (at 0.0 -4.25 90.0) (size 1.5 5.08)
      (layers "B.Cu" "B.Mask" "B.Paste")
      (uuid "79c80cf0-a0a0-4b5b-890e-62413b7c2aaa")
    )
    (pad "2" smd rect (at 0.0 4.25 90.0) (size 1.5 5.08)
      (layers "F.Cu" "F.Mask" "F.Paste")
      (uuid "be1aaf75-ec1f-4926-9774-b6afe0ae9f7b")
    )
    (pad "2" smd rect (at 0.0 4.25 90.0) (size 1.5 5.08)
      (layers "B.Cu" "B.Mask" "B.Paste")
      (uuid "b4e28427-51da-44c1-8cee-40ce3d1f5a0c")
    )
  )


  (zone (net 1) (net_name "GND") (layer "F.Cu") (uuid "a8e432e6-3d05-4531-9fb7-d0d1681b0640")
    (name "GND_THERMAL_U7")
    (hatch edge 0.508)
    (connect_pads thru_hole_only (clearance 0.2))
    (min_thickness 0.25)
    (fill yes (thermal_gap 0.3) (thermal_bridge_width 0.3))
    (polygon
      (pts (xy 70.0 49.5) (xy 80.0 49.5) (xy 80.0 59.5) (xy 70.0 59.5))
    )
  )
  (zone (net 1) (net_name "GND") (layer "B.Cu") (uuid "c2f8cd10-bc3a-4872-ae51-7558323a7cc3")
    (name "GND_THERMAL_U7_B")
    (hatch edge 0.508)
    (connect_pads thru_hole_only (clearance 0.2))
    (min_thickness 0.25)
    (fill yes (thermal_gap 0.3) (thermal_bridge_width 0.3))
    (polygon
      (pts (xy 70.0 49.5) (xy 80.0 49.5) (xy 80.0 59.5) (xy 70.0 59.5))
    )
  )
  (via (at 73.000 52.500) (size 1.0) (drill 0.6)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "03d86f2f-3b9b-478b-9b94-ca610a6d597b")
  )
  (via (at 77.000 52.500) (size 1.0) (drill 0.6)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "71ad83fc-0767-4cd5-9684-308dfaf83021")
  )
  (via (at 73.000 56.500) (size 1.0) (drill 0.6)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "e46acd65-6665-498f-ab7f-3d228e808dfd")
  )
  (via (at 77.000 56.500) (size 1.0) (drill 0.6)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "d8c0217e-97eb-4107-a495-f1f600808845")
  )
  (gr_text "GND_THERMAL_U7" (at 75.0 61.0 0) (layer "F.SilkS")
    (uuid "b7de666d-d910-4251-819a-8a93e806e33e")
    (effects (font (size 0.6 0.6) (thickness 0.1)))
  )


  (via (at 93.000 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "3b9ae02c-5621-4724-83b8-633e66c41ecc")
  )
  (via (at 95.500 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "e0c5d0cd-1464-42e0-a38d-4441792c386f")
  )
  (via (at 98.000 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "e544150e-57f4-4ae8-b5e2-5c53fa98c384")
  )
  (via (at 100.500 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "dece28f6-3580-44aa-b8af-6eca308257c4")
  )
  (via (at 103.000 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "c1f7c96d-3ecf-4d36-8ad7-3642be5a47ff")
  )
  (via (at 105.500 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "f3120e29-3946-4c81-8069-6c822e5f6b34")
  )
  (via (at 108.000 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "2b5b357e-7bab-4191-a750-c49500c0227e")
  )
  (via (at 110.500 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "c36e9a14-c8eb-4099-b630-c520c8b00e5d")
  )
  (via (at 113.000 68.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "54b54bcf-e445-4203-b92c-69ebf6bdbcce")
  )
  (via (at 113.000 71.000) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "a1d36be5-f67a-42fb-8d09-137813b7a31f")
  )
  (via (at 113.000 73.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "5d579e47-cf90-4b0d-838b-1f71aca9df2b")
  )
  (via (at 113.000 76.000) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "67156663-6804-4cea-a024-fe2f9858e945")
  )
  (via (at 113.000 78.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "abf96e8e-4afe-46a9-8424-9c71c2fab47c")
  )
  (via (at 113.000 81.000) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "642fa9d9-30df-437c-84d0-e44d54d3e947")
  )
  (via (at 113.000 83.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "5759eb52-85d5-4e00-a610-7cceab7b1905")
  )
  (via (at 110.500 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "f952993d-058d-4b19-8456-f573cbfd8274")
  )
  (via (at 108.000 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "fcca56ea-86d7-44a0-bd9f-b8d152e42ec7")
  )
  (via (at 105.500 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "56a25159-87fa-4922-b360-18a9a0490a84")
  )
  (via (at 103.000 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "9ca5b074-3e46-47c8-aae1-ccc4e042df17")
  )
  (via (at 100.500 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "0e14ec71-4394-4cdd-99be-3ede5ce91e0d")
  )
  (via (at 98.000 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "7bf8fe5b-ed98-4c61-bd57-8f5c2da775b9")
  )
  (via (at 95.500 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "44681d10-1dc4-4ccb-9955-48da8407d3cf")
  )
  (via (at 93.000 84.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "5f0e4757-b0fa-4af1-9c8d-240d82f24073")
  )
  (via (at 93.000 82.000) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "afefd3ce-876e-4d39-936b-b59a1a1dcc02")
  )
  (via (at 93.000 79.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "6f4f5dd9-45fb-4ff9-93a8-d9b0865be458")
  )
  (via (at 93.000 77.000) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "fc59ce53-f49e-422b-8a70-b7bf3350bbf7")
  )
  (via (at 93.000 74.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "9f7bc4d0-3206-493b-9fd5-955b05ff91fe")
  )
  (via (at 93.000 72.000) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "f4f816a3-87e3-4c0c-a540-0219d9bbc346")
  )
  (via (at 93.000 69.500) (size 0.8) (drill 0.4)
    (layers "F.Cu" "B.Cu")
    (net 1)
    (uuid "e8d29ff6-0cb8-4db0-9a87-09f1697301d2")
  )


  (zone (net 1) (net_name "GND") (layer "B.Cu") (uuid "352688af-9cb3-473b-860d-07645d06429f")
    (hatch edge 0.508)
    (connect_pads thru_hole_only (clearance 0.3))
    (min_thickness 0.2)
    (filled_areas_thickness no)
    (fill yes (thermal_gap 0.5) (thermal_bridge_width 0.5))
    (polygon
      (pts
        (xy 64.500 46.000) (xy 165.500 46.000)
        (xy 165.500 102.000) (xy 64.500 102.000)
      )
    )
  )

)