/* groovylint-disable CompileStatic, DuplicateListLiteral, DuplicateNumberLiteral, DuplicateStringLiteral, NglParseError, ParameterCount, UnnecessaryGetter, UnusedImport */
/**
* Tuya Zigbee Switch - Device Driver for Hubitat Elevation
*
* https://community.hubitat.com/t/dynamic-capabilities-commands-and-attributes-for-drivers/98342
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*
* This driver is inspired by @w35l3y work on Tuya device driver (Edge project).
* For a big portions of code all credits go to Jonathan Bradshaw.
*
* ver. 2.0.4 2023-06-29 kkossev - Tuya Zigbee Switch;
* ver. 2.1.2 2023-07-23 kkossev - Switch library;
* ver. 2.1.3 2023-08-12 kkossev - ping() improvements; added ping OK, Fail, Min, Max, rolling average counters; added clearStatistics(); added updateTuyaVersion() updateAqaraVersion(); added HE hub model and platform version;
* ver. 3.0.0 2023-11-24 kkossev - use commonLib; added AlwaysOn option; added ignore duplcated on/off events option;
* ver. 3.0.1 2023-11-25 kkossev - added LEDVANCE Plug 03; added TS0101 _TZ3000_pnzfdr9y SilverCrest Outdoor Plug Model HG06619 manufactured by Lidl; added configuration for 0x0006 cluster reproting for all devices;
* ver. 3.0.2 2023-12-12 kkossev - added ZBMINIL2
* ver. 3.0.3 2024-02-24 kkossev - commonLib 3.0.3 allignment
* ver. 3.0.7 2024-04-18 kkossev - commonLib 3.0.7 and groupsLib allignment
* ver. 3.1.1 2024-05-15 kkossev - added SONOFF ZBMicro; commonLib 3.1.1 allignment; Groovy linting;
* ver. 3.2.1 2024-06-04 kkossev - commonLib 3.2.1 allignment; ZBMicro - do a refresh() after saving the preferences;
* ver. 3.2.2 2024-06-29 kkossev - added on/off control for SWITCH_GENERIC_EF00_TUYA 'switch' dp;
* ver. 3.3.0 2025-03-10 kkossev - healthCheck by pinging the device; added Sonoff ZBMINIR2; added 'ZBMINI-L' to a new SWITCH_SONOFF_GENERIC profile
* ver. 3.3.1 2025-03-13 kkossev - added activeEndpoints() command in test mode; sending ZCL Default Response in ZBMINIR2 Detach Relay Mode; added PushableButton capability for ZBMINIR2;
* ver. 3.3.2 2025-03-29 kkossev - fixed ZCL Default Response in ZBMINIR2 Detach Relay Mode; added updateFirmware() command; added toggle() command; added delayedPowerOnState and delayedPowerOnTime preferences
* ver. 3.4.0 2025-04-08 kkossev - urgent fix for java.lang.CloneNotSupportedException in HE platform update 2.4.1.155
*
* TODO: initialize 'switch' to unknown
* TODO: add 'allStatus' attribute
* TODO: add Info dummy preference w/ link to Hubitat forum page
*/
static String version() { '3.4.0' }
static String timeStamp() { '2025/04/08 8:52 PM' }
@Field static final Boolean _DEBUG = false
import groovy.transform.Field
import hubitat.device.HubMultiAction
import hubitat.device.Protocol
import hubitat.helper.HexUtils
import hubitat.zigbee.zcl.DataType
import java.util.concurrent.ConcurrentHashMap
import groovy.json.JsonOutput
deviceType = 'Switch'
@Field static final String DEVICE_TYPE = 'Switch'
// for the ZBMINIR2 Detach Relay Mode button
metadata {
definition(
name: 'Tuya Zigbee Switch',
importUrl: 'https://raw.githubusercontent.com/kkossev/Hubitat/development/Drivers/Tuya%20Zigbee%20Switch/Tuya_Zigbee_Switch_lib_included.groovy',
namespace: 'kkossev', author: 'Krassimir Kossev', singleThreaded: true)
{
// all the capabilities are already declared in the libraries
attribute 'powerOnBehavior', 'enum', ['Turn power Off', 'Turn power On', 'Restore previous state']
attribute 'turboMode', 'enum', ['Disabled', 'Enabled']
attribute 'networkIndicator', 'enum', ['Disabled', 'Enabled']
attribute 'detachRelayMode', 'enum', ['Disabled', 'Enabled']
attribute 'externalTriggerMode', 'enum', ['edge', 'pulse', 'following(off)', 'following(on)']
attribute 'backLight', 'enum', ['Disabled', 'Enabled']
attribute 'faultCode', 'number'
attribute 'delayedPowerOnState', 'enum', ['Disabled', 'Enabled']
attribute 'delayedPowerOnTime', 'number'
attribute 'switchActions', 'enum', ['On', 'Off', 'Toggle']
command 'toggle'
command 'updateFirmware'
command 'sendCommand', [
[name:'command', type: 'STRING', description: 'command name', constraints: ['STRING']],
[name:'val', type: 'STRING', description: 'command parameter value', constraints: ['STRING']]
]
command 'setPar', [
[name:'par', type: 'STRING', description: 'preference parameter name', constraints: ['STRING']],
[name:'val', type: 'STRING', description: 'preference parameter value', constraints: ['STRING']]
]
if (_DEBUG) {
command 'activeEndpoints', []
command 'testDetachRelayMode', ['simulate the detach relay mode button']
}
// itterate through all the figerprints and add them on the fly
deviceProfilesV3.each { profileName, profileMap ->
if (profileMap.fingerprints != null) {
if (profileMap.device?.isDepricated != true) {
profileMap.fingerprints.each {
fingerprint it
}
}
}
}
}
preferences {
input name: 'txtEnable', type: 'bool', title: 'Enable descriptionText logging', defaultValue: true, description: 'Enables command logging.'
input name: 'logEnable', type: 'bool', title: 'Enable debug logging', defaultValue: true, description: 'Turns on debug logging for 24 hours.'
//
//input(name: "deviceNetworkId", type: "enum", title: "Router Device", description: "Select a mains-powered device that you want to put in pairing mode.", options: [ "0000":"👑 Hubitat Hub" ] + getDevices(), required: true)
}
}
boolean isZBMINIL2() { return (device?.getDataValue('model') ?: 'n/a') in ['ZBMINIL2'] }
@Field static final Map deviceProfilesV3 = [
'SWITCH_GENERIC_ZCL' : [
description : 'Generic Zigbee Switch (ZCL)',
models : ['GenericModel'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true],
preferences : ['powerOnBehavior':'0x0006:0x4003'],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0001,0003,0004,0005,0006', outClusters:'000A,0019', model:'GenericModel', manufacturer:'GenericManufacturer', deviceJoinName: 'Generic Zigbee Switch (ZCL)']
],
commands : ['resetStats':'resetStats', 'refresh':'refresh', 'initialize':'initialize', 'updateAllPreferences': 'updateAllPreferences', 'resetPreferencesToDefaults':'resetPreferencesToDefaults', 'validateAndFixPreferences':'validateAndFixPreferences'],
//tuyaDPs : [:],
attributes : [
[at:'0x0006:0x4003', name:'powerOnBehavior', /*enum8*/ type:'enum', rw: 'rw', min:0, max:255, defVal:'255', scale:1, map:[0:'Turn power Off', 1:'Turn power On', 255:'Restore previous state'], title:'Power On Behavior', description:'Power On Behavior']
],
refresh : [ 'powerOnBehavior'],
configuration : ['0x0006':['onOffReporting':[1, 1800, 0]]], // also binds the cluster
deviceJoinName: 'Generic Zigbee Switch (ZCL)'
],
'SWITCH_GENERIC_EF00_TUYA' : [
description : 'Generic Tuya Switch (0xEF00)',
models : ['TS0601'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true],
preferences : ['powerOnBehavior':'0x0006:0x4003'],
fingerprints : [ // Tuya EF00 single gang switches
[profileId:'0104', endpointId:'01', inClusters:'EF00', outClusters:'000A,0019', model:'Tuya', manufacturer:'Tuya', deviceJoinName: 'MOES dimmer/switch for TESTS (0xEF00)'],
[profileId:'0104', model:'TS0601', manufacturer:'_TZE200_amp6tsvy', endpointId:'01', inClusters:'0000,0004,0005,EF00', outClusters:'0019,000A', application:'42', deviceJoinName: 'Moes 1-Gang Switch / ZTS-EU1'],
[profileId:'0104', model:'TS0601', manufacturer:'_TZE200_oisqyl4o', endpointId:'01', inClusters:'0000,0004,0005,EF00', outClusters:'0019,000A', application:'42', deviceJoinName: 'No Neutral Push Button Light Switch 1 Gang'],
[profileId:'0104', model:'TS0601', manufacturer:'_TZE200_wfxuhoea', endpointId:'01', inClusters:'0000,0004,0005,EF00', outClusters:'0019,000A', application:'42', deviceJoinName: 'No Neutral Push Button Light Switch 1 Gang'],
[profileId:'0104', model:'TS0601', manufacturer:'_TZE200_gbagoilo', endpointId:'01', inClusters:'0000,0004,0005,EF00', outClusters:'0019,000A', application:'46', deviceJoinName: 'OZ Smart Single Light Switch'],
],
commands : ['resetStats':'resetStats', 'refresh':'refresh', 'initialize':'initialize', 'updateAllPreferences': 'updateAllPreferences', 'resetPreferencesToDefaults':'resetPreferencesToDefaults', 'validateAndFixPreferences':'validateAndFixPreferences'],
tuyaDPs: [
[dp:1, name:'switch', type:'enum', dt:'01', rw: 'rw', min:0, max:1 , defVal:'0', scale:1, map:[0:'off', 1:'on'] , unit:'', description:'switch']
],
attributes : [
[at:'0x0006:0x4003', name:'powerOnBehavior', /*enum8*/ type:'enum', rw: 'rw', min:0, max:255, defVal:'255', scale:1, map:[0:'Turn power Off', 1:'Turn power On', 255:'Restore previous state'], title:'Power On Behavior', description:'Power On Behavior']
],
refresh : [ 'powerOnBehavior'],
configuration : [:],
deviceJoinName: 'Generic Tuya Switch (0xEF00)'
],
'SWITCH_SONOFF_GENERIC' : [
description : 'Sonoff Generic Switch',
models : ['ZBMINI-L', '01MINIZB', 'BASICZBR3'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true],
preferences : [powerOnBehavior:'0x0006:0x4003'],
commands : [resetStats:'resetStats', refresh:'refresh'],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0004,0005,0006,0007,0020,FC57,FCA0', outClusters:'0019', model:'ZBMINI-L', manufacturer:'SONOFF', deviceJoinName: 'SONOFF ZBMINI-L'], // https://community.hubitat.com/t/sonoff-zigbee-switch-with-no-neutral-wire-zbmini-l/88629/14?u=kkossev
[profileId:"0104", endpointId:"01", inClusters:"0000,0003,0004,0005,0006,1000", outClusters:"1000", model:"01MINIZB", manufacturer:"SONOFF", deviceJoinName: 'SONOFF 01MINIZB'],
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0004,0005,0006', outClusters:'0000', model:'BASICZBR3', manufacturer:'SONOFF', deviceJoinName: 'SONOFF Relay BASICBR3'],
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0004,0005,0006', outClusters:'0000', model:'SA-003-Zigbee', manufacturer:'eWeLink', deviceJoinName: 'eWeLink Relay SA-003-Zigbee'],
],
attributes : [
[at:'0x0006:0x4003', name:'powerOnBehavior', type:'enum', rw: 'rw', min:0, max:255, defVal:'255', scale:1, map:[0:'Turn power Off', 1:'Turn power On', 255:'Restore previous state'], title:'Power On Behavior', description:'Power On Behavior']
],
refresh : [ 'powerOnBehavior'],
configuration : ['0x0006':['onOffReporting':[1, 1800, 0]], '0x0020':['unbind':true]],
deviceJoinName: 'Sonoff Generic Switch'
],
'SWITCH_SONOFF_ZBMICRO' : [
description : 'Sonoff ZBMicro Zigbee USB Switch',
models : ['ZBMicro'],
device : [type: 'switch', powerSource: 'dc', isSleepy:false],
capabilities : ['Switch': true],
preferences : [powerOnBehavior:'0x0006:0x4003', turboMode:'0xFC11:0x0012'],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0006,FC57,FC11', outClusters:'0003,0019', model:'ZBMicro', manufacturer:'SONOFF', deviceJoinName: 'Sonoff ZBMicro Zigbee USB Switch']
],
commands : [resetStats:'resetStats', refresh:'refresh'],
attributes : [
[at:'0x0006:0x4003', name:'powerOnBehavior', /*enum8*/ type:'enum', rw: 'rw', min:0, max:255, defVal:'255', scale:1, map:[0:'Turn power Off', 1:'Turn power On', 255:'Restore previous state'], title:'Power On Behavior', description:'Power On Behavior'],
[at:'0xFC11:0x0012', name:'turboMode', dt:'0x29', mfgCode:'0x1286', /*int16*/ type:'enum', rw: 'rw', min:9, max:20, defVal:'9', scale:1, map:[9:'Disabled', 20:'Enabled'], title:'Zigbee Radio Power Turbo Mode.', description:'Enable/disable Zigbee radio power Turbo mode.']
],
refresh : [ 'powerOnBehavior', 'turboMode'],
//configuration : ["0x0406":"bind"] // TODO !!
configuration : [
'0x0006':['onOffReporting':[1, 1800, 0]], // also binds the cluster
'0xFC11':['read':['onOffRefresh','turboMode']] // onOffRefresh is a method in onOffLib!
],
deviceJoinName: 'Sonoff ZBMicro Zigbee USB Switch'
],
'SWITCH_SONOFF_ZBMINIL2' : [
description : 'Sonoff ZBMini L2 Switch',
models : ['ZBMINIL2'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true, 'Button': true], // for testing only - TOBEDEL !
preferences : [powerOnBehavior:'0x0006:0x4003'/*, switchActions:'0x0007:0x0010'*/],
commands : [resetStats:'', refresh:'', customInitEvents:''],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0001,0003,0006,0007,0B05,FC57', outClusters:'0019', model:'ZBMINIL2', manufacturer:'SONOFF', deviceJoinName: 'SONOFF ZBMINIL2']
],
attributes : [
[at:'0x0006:0x4003', name:'powerOnBehavior', type:'enum', rw: 'rw', min:0, max:255, defVal:'255', scale:1, map:[0:'Turn power Off', 1:'Turn power On', 255:'Restore previous state'], title:'Power On Behavior', description:'Power On Behavior'],
[at:'0x0007:0x0000', name:'switchType', type:'enum', dt:'0x20', rw: 'ro', map:[0:'Toggle', 1:'Momentary', 2:'Multifunction'], description:'Switch Type: '], // unusable
[at:'0x0007:0x0010', name:'switchActions', type:'enum', dt:'0x30', rw: 'rw', map:[0:'On', 1:'Off', 2:'Toggle'], title:'Switch Actions', description:'Select Switch Actions '] // unusable
],
refresh : [ 'powerOnBehavior', 'switchType', 'switchActions'],
configuration : ['0x0006':['onOffReporting':[1, 1800, 0]], '0x0020':['unbind':true]],
deviceJoinName: 'Sonoff ZBMini L2 Switch'
],
'SWITCH_SONOFF_ZBMINIR2' : [ // https://github.com/Koenkk/zigbee-herdsman-converters/blob/master/src/devices/sonoff.ts#L1495-L1558
description : 'Sonoff ZBMINI R2 Switch',
models : ['ZBMINIR2'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true, 'Button': true],
preferences : [powerOnBehavior:'0x0006:0x4003', turboMode:'0xFC11:0x0012', networkIndicator:'0xFC11:0x0001', delayedPowerOnState:'0xFC11:0x0014', delayedPowerOnTime:'0xFC11:0x0015', externalTriggerMode: '0xFC11:0x0016', detachRelayMode:'0xFC11:0x0017'],
commands : [resetStats:'', refresh:'', initialize:'', updateAllPreferences: '',resetPreferencesToDefaults:'', validateAndFixPreferences:''],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0004,0006,0B05,FC57,FC11', outClusters:'0003,0006,0019', model:'ZBMINIR2', manufacturer:'SONOFF', application:"10", deviceJoinName: 'SONOFF ZBMINI R2']
],
attributes : [ // defaults are : number: DataType.INT16 (0x29) // decimal: DataType.INT16 (0x29) // enum: DataType.ENUM8 (0x30) . BOOLEAN is 0x10 // DataType.UNT16 is 0x21 // UINT8 is 0x20
[at:'0x0006:0x4003', name:'powerOnBehavior', type:'enum', rw: 'rw', min:0, max:255, defVal:'255', map:[0:'Turn power Off', 1:'Turn power On', 255:'Restore previous state'], title:'Power On Behavior', description:'Power On Behavior'],
[at:'0xFC11:0x0001', name:'networkIndicator', type:'enum', dt:'0x10', rw: 'rw', defVal:'0', map:[0:'Disabled', 1:'Enabled'], title:'Network Indicator.', description:'Enable/disable network indicator.'], // BOOLEAN
//[at:'0xFC11:0x0002', name:'backLight', type:'enum', dt:'0x10', rw: 'rw', defVal:'0', map:[0:'Disabled', 1:'Enabled'], title:'Backlight.', description:'Enable/disable Backlight.'], // BOOLEAN
[at:'0xFC11:0x0010', name:'faultCode', type:'number', rw: 'ro', title:'Fault Code' ], // INT32
[at:'0xFC11:0x0012', name:'turboMode', type:'enum', dt:'0x29', rw: 'rw', min:9, max:20, defVal:'9', map:[9:'Disabled', 20:'Enabled'], title:'Zigbee Radio Power Turbo Mode.', description:'Enable/disable Zigbee radio power Turbo mode.'], // INT16
[at:'0xFC11:0x0014', name:'delayedPowerOnState', type:'enum', dt:'0x10', advanced:true, rw: 'rw', defVal:'0', map:[0:'Disabled', 1:'Enabled'], title:'Delayed Power On State.', description:'Enable/disable Delayed Power On State.'], // BOOLEAN
[at:'0xFC11:0x0015', name:'delayedPowerOnTime', type:'number', dt:'0x23', advanced:true, rw: 'rw', title:'Delayed Power On Time', description: 'Delayed Power On Time' ], // UINT16
[at:'0xFC11:0x0016', name:'externalTriggerMode', type:'enum', dt:'0x20', advanced:true, rw: 'rw', defVal:'0', map:[0:'edge', 1:'pulse', 2:'following(off)', 130:'following(on)'], title:'External Trigger Mode', description: 'Select the External Trigger Mode' ], // UINT8 // externalTriggerMode: {ID: 0x0016, type: Zcl.DataType.UINT8},
[at:'0xFC11:0x0017', name:'detachRelayMode', type:'enum', dt:'0x10', /*advanced:true, */rw: 'rw', defVal:'0', map:[0:'Disabled', 1:'Enabled'], title:'Detach Relay Mode', description: 'Enable/Disable detach relay mode' ], // BOOLEAN //detachRelayMode: {ID: 0x0017, type: Zcl.DataType.BOOLEAN},
// ZBM5
// [at:'0xFC11:0x0018', name:'deviceWorkMode', type:'number', rw: 'rw', title:'Device Work Mode', description: 'Device Work Mode' ], // UINT8 //deviceWorkMode: {ID: 0x0018, type: Zcl.DataType.UINT8},
//[at:'0xFC11:0x0019', name:'detachRelayMode2', type:'number', rw: 'rw', title:'Detach Relay Mode 2', description: 'Detach Relay Mode 2' ], // BITMAP8 //detachRelayMode2: {ID: 0x0019, type: Zcl.DataType.BITMAP8},
],
refresh : [ 'powerOnBehavior', 'turboMode', 'networkIndicator', 'delayedPowerOnState', 'delayedPowerOnTime', 'detachRelayMode', 'externalTriggerMode'],
configuration : ['0x0006':['onOffReporting':[1, 1800, 0]]], // also binds the cluster
deviceJoinName: 'Sonoff ZBMINI R2 Switch'
],
'SWITCH_IKEA_TRADFRI' : [
description : 'Ikea Tradfri control outlet',
models : ['TRADFRI control outlet'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true],
preferences : [powerOnBehavior:'0x0006:0x4003'],
commands : [resetStats:'resetStats', refresh:'refresh'],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0004,0005,0006,0008,1000,FC7C', outClusters:'0005,0019,0020,1000', model:'TRADFRI control outlet', manufacturer:'IKEA of Sweden', deviceJoinName: 'TRADFRI control outlet'],
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0004,0005,0006,0008,1000,FC7C', outClusters:'0019,0020,1000', model:'TRADFRI control outlet', manufacturer:'IKEA of Sweden', deviceJoinName: 'TRADFRI control outlet']
],
attributes : [
[at:'0x0006:0x4003', name:'powerOnBehavior', type:'enum', rw: 'rw', min:0, max:255, defVal:'255', scale:1, map:[0:'Turn power Off', 1:'Turn power On', 255:'Restore previous state'], title:'Power On Behavior', description:'Power On Behavior']
],
refresh : [ 'powerOnBehavior'],
configuration : ['0x0006':['onOffReporting':[1, 1800, 0]]], // also binds the cluster
deviceJoinName: 'Ikea Tradfri control outlet'
],
'PLUG_LIDL' : [
description : 'Lidl outlet',
models : ['TS0101'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true],
preferences : [:],
commands : [resetStats:'resetStats', refresh:'refresh'],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0003,0004,0005,0006', outClusters:'0019,000A', model:'TS0101', manufacturer:'_TZ3000_pnzfdr9y', deviceJoinName: 'Lidl outlet']
],
attributes : [:],
refresh : [ ],
configuration : ['0x0006':['onOffReporting':[1, 1800, 0]]], // also binds the cluster
deviceJoinName: 'Lidl outlet'
],
'PLUG_LEDVANCE' : [
description : 'LEDVANCE outlet',
models : ['Plug Z3'],
device : [type: 'switch', powerSource: 'mains', isSleepy:false],
capabilities : ['Switch': true],
preferences : [:],
commands : [resetStats:'resetStats', refresh:'refresh'],
fingerprints : [
[profileId:'0104', endpointId:'01', inClusters:'0000,0001,0003,0006,0B05,FC0F', outClusters:'0019', model:'Plug Z3', manufacturer:'LEDVANCE', deviceJoinName: 'Plug Z3']
],
attributes : [:],
refresh : [ ],
configuration : ['0x0006':['onOffReporting':[1, 1800, 0]]], // also binds the cluster
deviceJoinName: 'LEDVANCE outlet'
],
]
void customUpdated() {
logDebug "customUpdated()"
List cmds = []
if (settings?.forcedProfile != null) {
if (this.respondsTo('getProfileKey') == false) {
logWarn "getProfileKey() is not defined in the driver"
}
else {
logDebug "current state.deviceProfile=${state.deviceProfile}, settings.forcedProfile=${settings?.forcedProfile}, getProfileKey()=${getProfileKey(settings?.forcedProfile)}"
if (getProfileKey(settings?.forcedProfile) != state.deviceProfile) {
logInfo "changing the device profile from ${state.deviceProfile} to ${getProfileKey(settings?.forcedProfile)}"
state.deviceProfile = getProfileKey(settings?.forcedProfile)
initializeVars(fullInit = false)
resetPreferencesToDefaults(debug = true)
logInfo 'press F5 to refresh the page'
}
}
}
/* groovylint-disable-next-line EmptyElseBlock */
else {
logDebug "forcedProfile is not set"
}
// Itterates through all settings
cmds += updateAllPreferences() // defined in deviceProfileLib
sendZigbeeCommands(cmds)
runIn(2, 'refresh')
}
List customRefresh() {
List cmds = []
cmds += onOffRefresh() // in onOffLib
//cmds += groupsRefresh() // in groupsLib
List devProfCmds = refreshFromDeviceProfileList()
if (devProfCmds != null && !devProfCmds.isEmpty()) {
cmds += devProfCmds
}
logDebug "customRefresh() : ${cmds}"
return cmds
}
void customPush() { //pushableButton capability
Integer buttonNumber = 1
logDebug "push button $buttonNumber"
sendButtonEvent(buttonNumber as int, 'pushed', isDigital = false) // defined in buttonLib
}
void customInitializeVars(final boolean fullInit=false) {
logDebug "customInitializeVars(${fullInit})"
if (state.deviceProfile == null) {
setDeviceNameAndProfile() // in deviceProfileiLib.groovy
}
if (fullInit == true) {
resetPreferencesToDefaults()
}
if (fullInit || settings?.turboMode == null) { device.updateSetting('turboMode', [value: '9', type: 'enum']) }
}
void customInitEvents(boolean fullInit=false) {
if (DEVICE?.capabilities?.Button == true) {
logDebug "customInitEvents() : Button capability is enabled (fullInit=${fullInit})"
sendNumberOfButtonsEvent(1)
sendSupportedButtonValuesEvent(['pushed']) // defined in buttonLib
}
else {
logTrace "customInitEvents() : Button capability is disabled (fullInit=${fullInit})"
}
}
List parseMinMaxDelta(String cluster, String attribute) {
List result = [1, 7200, 0]
if (DEVICE?.configuration == null || DEVICE?.configuration.isEmpty()) {
logDebug 'No custom configuration found'
return result
}
if (cluster in DEVICE?.configuration) {
if (DEVICE?.configuration[cluster][attribute] != null) {
result[0] = safeToInt(DEVICE?.configuration[cluster][attribute][0])
result[1] = safeToInt(DEVICE?.configuration[cluster][attribute][1])
result[2] = safeToInt(DEVICE?.configuration[cluster][attribute][2])
}
}
return result
}
List customConfigureDevice() {
List cmds = []
if (DEVICE?.device?.isDepricated == true) {
logWarn 'The use of this driver with this device is depricated. Please update to the new driver!'
return cmds
}
if (DEVICE?.configuration == null || DEVICE?.configuration.isEmpty()) {
logDebug 'No custom configuration found'
return cmds
}
int intMinTime = safeToInt(1)
int intMaxTime = safeToInt(7200)
if ('0x0006' in DEVICE?.configuration) {
if (DEVICE?.configuration['0x0006']['bind'] == true) {
cmds += ["zdo bind 0x${device.deviceNetworkId} 0x01 0x01 0x0006 {${device.zigbeeId}} {}", 'delay 229', ]
logDebug "binding the device to the OnOff cluster"
}
// '0x0006':['onOffReporting':[1, 1800, 0]],
if (DEVICE?.configuration['0x0006']['onOffReporting'] != null) {
(intMinTime, intMaxTime, delta) = parseMinMaxDelta('0x0006', 'onOffReporting')
cmds += configureReportingInt('Write', ONOFF, intMinTime, intMaxTime, delta, sendNow = false) // defined in reportingLib
logDebug "reporting for cluster 0x0006 set to ${intMinTime} - ${intMaxTime}"
}
}
if ('0x0020' in DEVICE?.configuration) {
if (DEVICE?.configuration['0x0020']['unbind'] != null) {
logDebug 'customConfigureDevice() : unbind ZBMINIL2 poll control cluster'
// Unbind genPollCtrl (0x0020) to prevent device from sending checkin message. // Zigbee-herdsmans responds to the checkin message which causes the device to poll slower.
// https://github.com/Koenkk/zigbee2mqtt/issues/11676 // https://github.com/Koenkk/zigbee2mqtt/issues/10282 // https://github.com/zigpy/zha-device-handlers/issues/1519
cmds += ["zdo unbind 0x${device.deviceNetworkId} 0x${device.endpointId} 0x01 0x0020 {${device.zigbeeId}} {}",'delay 229',]
}
}
//'0xFC11':['read':['turboMode']]
if ('0xFC11' in DEVICE?.configuration) {
if (DEVICE?.configuration['0xFC11']['read'] != null) {
cmds += refreshFromConfigureReadList(DEVICE?.configuration['0xFC11']['read']) // defined in deviceProfileLib
logDebug "reading attributes ${DEVICE?.configuration['0xFC11']['read']} from cluster 0xFC11"
}
}
logDebug "customConfigureDevice() : ${cmds}"
return cmds
}
void customParseOnOffCluster(final Map descMap) {
final Integer value = safeToInt(hexStrToUnsignedInt(descMap.value))
logTrace "customParseOnOffCluster: zigbee received cluster 0x0006 command ${descMap.command} attribute 0x${descMap.attrId} value ${value} (raw ${descMap.value})"
boolean result = processClusterAttributeFromDeviceProfile(descMap) // deviceProfileLib
if (result == false) {
logTrace "customParseOnOffCluster: cluster 0x0006 command ${descMap.command} attribute 0x${descMap.attrId} (value ${descMap.value})"
if (descMap.attrId == null) {
logTrace 'null attribute id'
if (descMap.command == '02' && descMap.data?.isEmpty())
{
// !!! When ZBMINIR2 reports the OnOff Client Toggle command - expects a ZCL Default Response !!!
// https://community.hubitat.com/t/zigbee-zcl-default-response-0x0b/11151/10?u=kkossev
// "he raw ${device.deviceNetworkId} 1 1 0x0006 {08 01 0B 0A 00}"
logDebug ' => Detach Relay Mode - contact open or closed ...'
//sendZigbeeCommands(["he raw ${device.deviceNetworkId} 1 1 0x0006 {08 01 0B 0A 00}"])
sendZigbeeCommands(["he raw ${device.deviceNetworkId} 1 1 0x0006 {08 01 0B 02 00}"])
customPush()
}
else {
logTrace "customParseOnOffCluster: unprocessed 0x0006 command ${descMap.command} attribute 0x${descMap.attrId} (value ${descMap.value})"
}
}
else {
standardParseOnOffCluster(descMap)
}
}
}
public void standardParseonOffConfigurationCluster (final Map descMap) {
final Integer value = safeToInt(hexStrToUnsignedInt(descMap.value))
logTrace "standardParseonOffConfigurationCluster: zigbee received cluster 0x0007 command ${descMap.command} attribute 0x${descMap.attrId} value ${value} (raw ${descMap.value})"
boolean result = processClusterAttributeFromDeviceProfile(descMap) // deviceProfileLib
if (result == false) {
logTrace "standardParseonOffConfigurationCluster: unprocessed 0x0007 command ${descMap.command} attribute 0x${descMap.attrId} (value ${descMap.value})"
}
}
void customParseElectricalMeasureCluster(final Map descMap) {
if (descMap.value == null || descMap.value == 'FFFF') { return } // invalid or unknown value
int value = hexStrToUnsignedInt(descMap.value)
logDebug "customParseElectricalMeasureCluster: (0x0B04) attribute 0x${descMap.attrId} descMap.value=${descMap.value} value=${value}"
}
void customParseMeteringCluster(final Map descMap) {
if (descMap.value == null || descMap.value == 'FFFF') { return } // invalid or unknown value
int value = hexStrToUnsignedInt(descMap.value)
logDebug "customParseMeteringCluster: (0x0702) attribute 0x${descMap.attrId} descMap.value=${descMap.value} value=${value}"
}
void customParseFC11Cluster(final Map descMap) {
final Integer value = safeToInt(hexStrToUnsignedInt(descMap.value))
logTrace "customParseFC11Cluster: zigbee received cluster 0xFC11 attribute 0x${descMap.attrId} value ${value} (raw ${descMap.value})"
boolean result = processClusterAttributeFromDeviceProfile(descMap) // deviceProfileLib
if (result == false) {
logWarn "customParseFC11Cluster: received unknown 0xFC11 attribute 0x${descMap.attrId} (value ${descMap.value})"
}
}
void activeEndpoints() {
logInfo "sending activeEndpoints() request..."
List cmds = []
cmds += ["he raw ${device.deviceNetworkId} 0 0 0x0005 {00 ${zigbee.swapOctets(device.deviceNetworkId)}} {0x0000}"] //get all the endpoints...
String endpointIdTemp = device.endpointId ?: '01'
cmds += ["he raw ${device.deviceNetworkId} 0 0 0x0004 {00 ${zigbee.swapOctets(device.deviceNetworkId)} $endpointIdTemp} {0x0000}"]
sendZigbeeCommands(cmds)
}
void parseSimpleDescriptorResponse(Map descMap) {
logDebug "${device.displayName} Received simple descriptor response, data=${descMap.data} (Sequence Number:${descMap.data[0]}, status:${descMap.data[1]}, length:${hubitat.helper.HexUtils.hexStringToInt(descMap.data[4])}"
if (logEnable == true) { log.info "${device.displayName} Endpoint: ${descMap.data[5]} Application Device:${descMap.data[9]}${descMap.data[8]}, Application Version:${descMap.data[10]}" }
int inputClusterCount = hubitat.helper.HexUtils.hexStringToInt(descMap.data[11])
String inputClusterList = ''
for (int i in 1..inputClusterCount) {
inputClusterList += descMap.data[13 + (i - 1) * 2] + descMap.data[12 + (i - 1) * 2 ] + ','
}
inputClusterList = inputClusterList.substring(0, inputClusterList.length() - 1)
if (logEnable == true) { log.info "${device.displayName} Input Cluster Count: ${inputClusterCount} Input Cluster List : ${inputClusterList}" }
if (getDataValue('inClusters') != inputClusterList) {
if (logEnable == true) { log.warn "${device.displayName} inClusters=${getDataValue('inClusters')} differs from inputClusterList:${inputClusterList} - will be updated!" }
updateDataValue('inClusters', inputClusterList)
}
int outputClusterCount = hubitat.helper.HexUtils.hexStringToInt(descMap.data[12 + inputClusterCount * 2])
String outputClusterList = ''
if (outputClusterCount >= 1) {
for (int i in 1..outputClusterCount) {
outputClusterList += descMap.data[14 + inputClusterCount * 2 + (i - 1) * 2] + descMap.data[13 + inputClusterCount * 2 + (i - 1) * 2] + ','
}
outputClusterList = outputClusterList.substring(0, outputClusterList.length() - 1)
}
if (logEnable == true) { log.info "${device.displayName} Output Cluster Count: ${outputClusterCount} Output Cluster List : ${outputClusterList}" }
if (getDataValue('outClusters') != outputClusterList) {
if (logEnable == true) { log.warn "${device.displayName} outClusters=${getDataValue('outClusters')} differs from outputClusterList:${outputClusterList} - will be updated!" }
updateDataValue('outClusters', outputClusterList)
}
}
void updateFirmware() {
sendInfoEvent("updateFirmware: check 'Hub' live logs...")
sendZigbeeCommands(zigbee.updateFirmware())
}
void toggle() {
logDebug "toggling switch.."
if (device.getDataValue('model') != "TS0601") {
sendZigbeeCommands(zigbee.command(0x0006,0x02))
}
else {
if ((device.currentState('switch')?.value ?: 'n/a') == 'off') {
on()
}
else {
off()
}
}
}
void testDetachRelayMode() {
logDebug "testDetachRelayMode()"
List cmds = []
// cmds += ["he raw ${device.deviceNetworkId} 1 1 0xFC11 {0A 01 0B 0A 00}"] // ZCL Default Response
parse('catchall: 0104 0006 01 01 0040 00 464B 01 00 0000 02 00')
}
// /////////////////////////////////////////////////////////////////// Libraries //////////////////////////////////////////////////////////////////////
// ~~~~~ start include (144) kkossev.commonLib ~~~~~
/* groovylint-disable CompileStatic, DuplicateListLiteral, DuplicateMapLiteral, DuplicateNumberLiteral, DuplicateStringLiteral, ImplicitClosureParameter, ImplicitReturnStatement, InsecureRandom, LineLength, MethodCount, MethodReturnTypeRequired, MethodSize, NglParseError, NoDouble, ParameterName, PublicMethodsBeforeNonPublicMethods, StaticMethodsBeforeInstanceMethods, UnnecessaryGetter, UnnecessaryGroovyImport, UnnecessaryObjectReferences, UnnecessaryPackageReference, UnnecessaryPublicModifier, UnnecessarySetter, UnusedImport, UnusedPrivateMethod, VariableName */ // library marker kkossev.commonLib, line 1
library( // library marker kkossev.commonLib, line 2
base: 'driver', author: 'Krassimir Kossev', category: 'zigbee', description: 'Common ZCL Library', name: 'commonLib', namespace: 'kkossev', // library marker kkossev.commonLib, line 3
importUrl: 'https://raw.githubusercontent.com/kkossev/Hubitat/refs/heads/development/Libraries/commonLib.groovy', documentationLink: 'https://github.com/kkossev/Hubitat/wiki/libraries-commonLib', // library marker kkossev.commonLib, line 4
version: '3.4.0' // library marker kkossev.commonLib, line 5
) // library marker kkossev.commonLib, line 6
/* // library marker kkossev.commonLib, line 7
* Common ZCL Library // library marker kkossev.commonLib, line 8
* // library marker kkossev.commonLib, line 9
* Licensed Virtual the Apache License, Version 2.0 (the "License"); you may not use this file except // library marker kkossev.commonLib, line 10
* in compliance with the License. You may obtain a copy of the License at: // library marker kkossev.commonLib, line 11
* // library marker kkossev.commonLib, line 12
* http://www.apache.org/licenses/LICENSE-2.0 // library marker kkossev.commonLib, line 13
* // library marker kkossev.commonLib, line 14
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed // library marker kkossev.commonLib, line 15
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License // library marker kkossev.commonLib, line 16
* for the specific language governing permissions and limitations under the License. // library marker kkossev.commonLib, line 17
* // library marker kkossev.commonLib, line 18
* This library is inspired by @w35l3y work on Tuya device driver (Edge project). // library marker kkossev.commonLib, line 19
* For a big portions of code all credits go to Jonathan Bradshaw. // library marker kkossev.commonLib, line 20
* // library marker kkossev.commonLib, line 21
* // library marker kkossev.commonLib, line 22
* ver. 1.0.0 2022-06-18 kkossev - first beta version // library marker kkossev.commonLib, line 23
* ver. 2.0.0 2023-05-08 kkossev - first published version 2.x.x // library marker kkossev.commonLib, line 24
* ver. 2.1.6 2023-11-06 kkossev - last update on version 2.x.x // library marker kkossev.commonLib, line 25
* ver. 3.0.0 2023-11-16 kkossev - first version 3.x.x // library marker kkossev.commonLib, line 26
* ver. 3.0.1 2023-12-06 kkossev - info event renamed to Status; txtEnable and logEnable moved to the custom driver settings; 0xFC11 cluster; logEnable is false by default; checkDriverVersion is called on updated() and on healthCheck(); // library marker kkossev.commonLib, line 27
* ver. 3.0.2 2023-12-17 kkossev - configure() changes; Groovy Lint, Format and Fix v3.0.0 // library marker kkossev.commonLib, line 28
* ver. 3.0.3 2024-03-17 kkossev - more groovy lint; support for deviceType Plug; ignore repeated temperature readings; cleaned thermostat specifics; cleaned AirQuality specifics; removed IRBlaster type; removed 'radar' type; threeStateEnable initlilization // library marker kkossev.commonLib, line 29
* ver. 3.0.4 2024-04-02 kkossev - removed Button, buttonDimmer and Fingerbot specifics; batteryVoltage bug fix; inverceSwitch bug fix; parseE002Cluster; // library marker kkossev.commonLib, line 30
* ver. 3.0.5 2024-04-05 kkossev - button methods bug fix; configure() bug fix; handlePm25Event bug fix; // library marker kkossev.commonLib, line 31
* ver. 3.0.6 2024-04-08 kkossev - removed isZigUSB() dependency; removed aqaraCube() dependency; removed button code; removed lightSensor code; moved zigbeeGroups and level and battery methods to dedicated libs + setLevel bug fix; // library marker kkossev.commonLib, line 32
* ver. 3.0.7 2024-04-23 kkossev - tuyaMagic() for Tuya devices only; added stats cfgCtr, instCtr rejoinCtr, matchDescCtr, activeEpRqCtr; trace ZDO commands; added 0x0406 OccupancyCluster; reduced debug for chatty devices; // library marker kkossev.commonLib, line 33
* ver. 3.1.0 2024-04-28 kkossev - unnecesery unschedule() speed optimization; added syncTuyaDateTime(); tuyaBlackMagic() initialization bug fix. // library marker kkossev.commonLib, line 34
* ver. 3.1.1 2024-05-05 kkossev - getTuyaAttributeValue bug fix; added customCustomParseIlluminanceCluster method // library marker kkossev.commonLib, line 35
* ver. 3.2.0 2024-05-23 kkossev - standardParse____Cluster and customParse___Cluster methods; moved onOff methods to a new library; rename all custom handlers in the libs to statdndardParseXXX // library marker kkossev.commonLib, line 36
* ver. 3.2.1 2024-06-05 kkossev - 4 in 1 V3 compatibility; added IAS cluster; setDeviceNameAndProfile() fix; // library marker kkossev.commonLib, line 37
* ver. 3.2.2 2024-06-12 kkossev - removed isAqaraTRV_OLD() and isAqaraTVOC_OLD() dependencies from the lib; added timeToHMS(); metering and electricalMeasure clusters swapped bug fix; added cluster 0x0204; // library marker kkossev.commonLib, line 38
* ver. 3.3.0 2024-06-25 kkossev - fixed exception for unknown clusters; added cluster 0xE001; added powerSource - if 5 minutes after initialize() the powerSource is still unknown, query the device for the powerSource // library marker kkossev.commonLib, line 39
* ver. 3.3.1 2024-07-06 kkossev - removed isFingerbot() dependancy; added FC03 cluster (Frient); removed noDef from the linter; added customParseIasMessage and standardParseIasMessage; powerSource set to unknown on initialize(); add 0x0007 onOffConfiguration cluster'; // library marker kkossev.commonLib, line 40
* ver. 3.3.2 2024-07-12 kkossev - added PollControl (0x0020) cluster; ping for SONOFF // library marker kkossev.commonLib, line 41
* ver. 3.3.3 2024-09-15 kkossev - added queryAllTuyaDP(); 2 minutes healthCheck option; // library marker kkossev.commonLib, line 42
* ver. 3.3.4 2025-01-29 kkossev - 'LOAD ALL DEFAULTS' is the default Configure command. // library marker kkossev.commonLib, line 43
* ver. 3.3.5 2025-03-05 kkossev - getTuyaAttributeValue made public; fixed checkDriverVersion bug on hub reboot. // library marker kkossev.commonLib, line 44
* ver. 3.4.0 2025-03-23 kkossev - healthCheck by pinging the device; updateRxStats() replaced with inline code; added state.lastRx.timeStamp; added activeEndpoints() handler call; documentation improvements // library marker kkossev.commonLib, line 45
* ver. 3.5.0 2025-04-08 kkossev - urgent fix for java.lang.CloneNotSupportedException // library marker kkossev.commonLib, line 46
* // library marker kkossev.commonLib, line 47
* TODO: add GetInfo (endpoints list) command (in the 'Tuya Device' driver?) // library marker kkossev.commonLib, line 48
* TODO: make the configure() without parameter smart - analyze the State variables and call delete states.... call ActiveAndpoints() or/amd initialize() or/and configure() // library marker kkossev.commonLib, line 49
* TODO: check - offlineCtr is not increasing? (ZBMicro); // library marker kkossev.commonLib, line 50
* TODO: check deviceCommandTimeout() // library marker kkossev.commonLib, line 51
* TODO: when device rejoins the network, read the battery percentage again (probably in custom handler, not for all devices) // library marker kkossev.commonLib, line 52
* TODO: refresh() to include updating the softwareBuild data version // library marker kkossev.commonLib, line 53
* TODO: map the ZCL powerSource options to Hubitat powerSource options // library marker kkossev.commonLib, line 54
* TODO: MOVE ZDO counters to health state? // library marker kkossev.commonLib, line 55
* TODO: refresh() to bypass the duplicated events and minimim delta time between events checks // library marker kkossev.commonLib, line 56
* TODO: Versions of the main module + included libraries (in the 'Tuya Device' driver?) // library marker kkossev.commonLib, line 57
* TODO: disableDefaultResponse for Tuya commands // library marker kkossev.commonLib, line 58
* // library marker kkossev.commonLib, line 59
*/ // library marker kkossev.commonLib, line 60
String commonLibVersion() { '3.5.0' } // library marker kkossev.commonLib, line 62
String commonLibStamp() { '2025/04/08 8:36 PM' } // library marker kkossev.commonLib, line 63
import groovy.transform.Field // library marker kkossev.commonLib, line 65
import hubitat.device.HubMultiAction // library marker kkossev.commonLib, line 66
import hubitat.device.Protocol // library marker kkossev.commonLib, line 67
import hubitat.helper.HexUtils // library marker kkossev.commonLib, line 68
import hubitat.zigbee.zcl.DataType // library marker kkossev.commonLib, line 69
import java.util.concurrent.ConcurrentHashMap // library marker kkossev.commonLib, line 70
import groovy.json.JsonOutput // library marker kkossev.commonLib, line 71
import groovy.transform.CompileStatic // library marker kkossev.commonLib, line 72
import java.math.BigDecimal // library marker kkossev.commonLib, line 73
metadata { // library marker kkossev.commonLib, line 75
if (_DEBUG) { // library marker kkossev.commonLib, line 76
command 'test', [[name: 'test', type: 'STRING', description: 'test', defaultValue : '']] // library marker kkossev.commonLib, line 77
command 'testParse', [[name: 'testParse', type: 'STRING', description: 'testParse', defaultValue : '']] // library marker kkossev.commonLib, line 78
command 'tuyaTest', [ // library marker kkossev.commonLib, line 79
[name:'dpCommand', type: 'STRING', description: 'Tuya DP Command', constraints: ['STRING']], // library marker kkossev.commonLib, line 80
[name:'dpValue', type: 'STRING', description: 'Tuya DP value', constraints: ['STRING']], // library marker kkossev.commonLib, line 81
[name:'dpType', type: 'ENUM', constraints: ['DP_TYPE_VALUE', 'DP_TYPE_BOOL', 'DP_TYPE_ENUM'], description: 'DP data type'] // library marker kkossev.commonLib, line 82
] // library marker kkossev.commonLib, line 83
} // library marker kkossev.commonLib, line 84
// common capabilities for all device types // library marker kkossev.commonLib, line 86
capability 'Configuration' // library marker kkossev.commonLib, line 87
capability 'Refresh' // library marker kkossev.commonLib, line 88
capability 'HealthCheck' // library marker kkossev.commonLib, line 89
capability 'PowerSource' // powerSource - ENUM ["battery", "dc", "mains", "unknown"] // library marker kkossev.commonLib, line 90
// common attributes for all device types // library marker kkossev.commonLib, line 92
attribute 'healthStatus', 'enum', ['unknown', 'offline', 'online'] // library marker kkossev.commonLib, line 93
attribute 'rtt', 'number' // library marker kkossev.commonLib, line 94
attribute 'Status', 'string' // library marker kkossev.commonLib, line 95
// common commands for all device types // library marker kkossev.commonLib, line 97
command 'configure', [[name:'normally it is not needed to configure anything', type: 'ENUM', constraints: ConfigureOpts.keySet() as List]] // library marker kkossev.commonLib, line 98
// trap for Hubitat F2 bug // library marker kkossev.commonLib, line 100
fingerprint profileId:'0104', endpointId:'F2', inClusters:'', outClusters:'', model:'unknown', manufacturer:'unknown', deviceJoinName: 'Zigbee device affected by Hubitat F2 bug' // library marker kkossev.commonLib, line 101
preferences { // library marker kkossev.commonLib, line 103
// txtEnable and logEnable moved to the custom driver settings - copy& paste there ... // library marker kkossev.commonLib, line 104
//input name: 'txtEnable', type: 'bool', title: 'Enable descriptionText logging', defaultValue: true, description: 'Enables command logging.' // library marker kkossev.commonLib, line 105
//input name: 'logEnable', type: 'bool', title: 'Enable debug logging', defaultValue: true, description: 'Turns on debug logging for 24 hours.' // library marker kkossev.commonLib, line 106
if (device) { // library marker kkossev.commonLib, line 108
input name: 'advancedOptions', type: 'bool', title: 'Advanced Options', description: 'These advanced options should be already automatically set in an optimal way for your device...', defaultValue: false // library marker kkossev.commonLib, line 109
if (advancedOptions == true) { // library marker kkossev.commonLib, line 110
input name: 'healthCheckMethod', type: 'enum', title: 'Healthcheck Method', options: HealthcheckMethodOpts.options, defaultValue: HealthcheckMethodOpts.defaultValue, required: true, description: 'Method to check device online/offline status.' // library marker kkossev.commonLib, line 111
input name: 'healthCheckInterval', type: 'enum', title: 'Healthcheck Interval', options: HealthcheckIntervalOpts.options, defaultValue: HealthcheckIntervalOpts.defaultValue, required: true, description: 'How often the hub will check the device health.
3 consecutive failures will result in status "offline"' // library marker kkossev.commonLib, line 112
input name: 'traceEnable', type: 'bool', title: 'Enable trace logging', defaultValue: false, description: 'Turns on detailed extra trace logging for 30 minutes.' // library marker kkossev.commonLib, line 113
} // library marker kkossev.commonLib, line 114
} // library marker kkossev.commonLib, line 115
} // library marker kkossev.commonLib, line 116
} // library marker kkossev.commonLib, line 117
@Field static final Integer DIGITAL_TIMER = 1000 // command was sent by this driver // library marker kkossev.commonLib, line 119
@Field static final Integer REFRESH_TIMER = 6000 // refresh time in miliseconds // library marker kkossev.commonLib, line 120
@Field static final Integer DEBOUNCING_TIMER = 300 // ignore switch events // library marker kkossev.commonLib, line 121
@Field static final Integer COMMAND_TIMEOUT = 10 // timeout time in seconds // library marker kkossev.commonLib, line 122
@Field static final Integer MAX_PING_MILISECONDS = 10000 // rtt more than 10 seconds will be ignored // library marker kkossev.commonLib, line 123
@Field static final String UNKNOWN = 'UNKNOWN' // library marker kkossev.commonLib, line 124
@Field static final Integer DEFAULT_MIN_REPORTING_TIME = 10 // send the report event no more often than 10 seconds by default // library marker kkossev.commonLib, line 125
@Field static final Integer DEFAULT_MAX_REPORTING_TIME = 3600 // library marker kkossev.commonLib, line 126
@Field static final Integer PRESENCE_COUNT_THRESHOLD = 3 // missing 3 checks will set the device healthStatus to offline // library marker kkossev.commonLib, line 127
@Field static final int DELAY_MS = 200 // Delay in between zigbee commands // library marker kkossev.commonLib, line 128
@Field static final Integer INFO_AUTO_CLEAR_PERIOD = 60 // automatically clear the Info attribute after 60 seconds // library marker kkossev.commonLib, line 129
@Field static final Map HealthcheckMethodOpts = [ // used by healthCheckMethod // library marker kkossev.commonLib, line 131
defaultValue: 1, options: [0: 'Disabled', 1: 'Activity check', 2: 'Periodic polling'] // library marker kkossev.commonLib, line 132
] // library marker kkossev.commonLib, line 133
@Field static final Map HealthcheckIntervalOpts = [ // used by healthCheckInterval // library marker kkossev.commonLib, line 134
defaultValue: 240, options: [2: 'Every 2 Mins', 10: 'Every 10 Mins', 30: 'Every 30 Mins', 60: 'Every 1 Hour', 240: 'Every 4 Hours', 720: 'Every 12 Hours'] // library marker kkossev.commonLib, line 135
] // library marker kkossev.commonLib, line 136
@Field static final Map ConfigureOpts = [ // library marker kkossev.commonLib, line 138
'*** LOAD ALL DEFAULTS ***' : [key:0, function: 'loadAllDefaults'], // library marker kkossev.commonLib, line 139
'Configure the device' : [key:2, function: 'configureNow'], // library marker kkossev.commonLib, line 140
'Reset Statistics' : [key:9, function: 'resetStatistics'], // library marker kkossev.commonLib, line 141
' -- ' : [key:3, function: 'configureHelp'], // library marker kkossev.commonLib, line 142
'Delete All Preferences' : [key:4, function: 'deleteAllSettings'], // library marker kkossev.commonLib, line 143
'Delete All Current States' : [key:5, function: 'deleteAllCurrentStates'], // library marker kkossev.commonLib, line 144
'Delete All Scheduled Jobs' : [key:6, function: 'deleteAllScheduledJobs'], // library marker kkossev.commonLib, line 145
'Delete All State Variables' : [key:7, function: 'deleteAllStates'], // library marker kkossev.commonLib, line 146
'Delete All Child Devices' : [key:8, function: 'deleteAllChildDevices'], // library marker kkossev.commonLib, line 147
' - ' : [key:1, function: 'configureHelp'] // library marker kkossev.commonLib, line 148
] // library marker kkossev.commonLib, line 149
public boolean isVirtual() { device.controllerType == null || device.controllerType == '' } // library marker kkossev.commonLib, line 151
/** // library marker kkossev.commonLib, line 153
* Parse Zigbee message // library marker kkossev.commonLib, line 154
* @param description Zigbee message in hex format // library marker kkossev.commonLib, line 155
*/ // library marker kkossev.commonLib, line 156
public void parse(final String description) { // library marker kkossev.commonLib, line 157
Map stateCopy = state // .clone() throws java.lang.CloneNotSupportedException in HE platform version 2.4.1.155 ! // library marker kkossev.commonLib, line 158
checkDriverVersion(stateCopy) // +1 ms // library marker kkossev.commonLib, line 159
if (state.stats != null) { state.stats?.rxCtr= (state.stats?.rxCtr ?: 0) + 1 } else { state.stats = [:] } // updateRxStats(state) // +1 ms // library marker kkossev.commonLib, line 160
if (state.lastRx != null) { state.lastRx?.timeStamp = unix2formattedDate(now()) } else { state.lastRx = [:] } // library marker kkossev.commonLib, line 161
unscheduleCommandTimeoutCheck(state) // library marker kkossev.commonLib, line 162
setHealthStatusOnline(state) // +2 ms // library marker kkossev.commonLib, line 163
if (description?.startsWith('zone status') || description?.startsWith('zone report')) { // library marker kkossev.commonLib, line 165
logDebug "parse: zone status: $description" // library marker kkossev.commonLib, line 166
if (this.respondsTo('customParseIasMessage')) { customParseIasMessage(description) } // library marker kkossev.commonLib, line 167
else if (this.respondsTo('standardParseIasMessage')) { standardParseIasMessage(description) } // library marker kkossev.commonLib, line 168
else if (this.respondsTo('parseIasMessage')) { parseIasMessage(description) } // library marker kkossev.commonLib, line 169
else { logDebug "ignored IAS zone status (no IAS parser) description: $description" } // library marker kkossev.commonLib, line 170
return // library marker kkossev.commonLib, line 171
} // library marker kkossev.commonLib, line 172
else if (description?.startsWith('enroll request')) { // library marker kkossev.commonLib, line 173
logDebug "parse: enroll request: $description" // library marker kkossev.commonLib, line 174
/* The Zone Enroll Request command is generated when a device embodying the Zone server cluster wishes to be enrolled as an active alarm device. It must do this immediately it has joined the network (during commissioning). */ // library marker kkossev.commonLib, line 175
if (settings?.logEnable) { logInfo 'Sending IAS enroll response...' } // library marker kkossev.commonLib, line 176
List cmds = zigbee.enrollResponse() + zigbee.readAttribute(0x0500, 0x0000) // library marker kkossev.commonLib, line 177
logDebug "enroll response: ${cmds}" // library marker kkossev.commonLib, line 178
sendZigbeeCommands(cmds) // library marker kkossev.commonLib, line 179
return // library marker kkossev.commonLib, line 180
} // library marker kkossev.commonLib, line 181
if (isTuyaE00xCluster(description) == true || otherTuyaOddities(description) == true) { // +15 ms // library marker kkossev.commonLib, line 183
return // library marker kkossev.commonLib, line 184
} // library marker kkossev.commonLib, line 185
final Map descMap = myParseDescriptionAsMap(description) // +5 ms // library marker kkossev.commonLib, line 186
if (!isChattyDeviceReport(descMap)) { logDebug "parse: descMap = ${descMap} description=${description }" } // library marker kkossev.commonLib, line 188
if (isSpammyDeviceReport(descMap)) { return } // +20 mS (both) // library marker kkossev.commonLib, line 189
if (descMap.profileId == '0000') { // library marker kkossev.commonLib, line 191
parseZdoClusters(descMap) // library marker kkossev.commonLib, line 192
return // library marker kkossev.commonLib, line 193
} // library marker kkossev.commonLib, line 194
if (descMap.isClusterSpecific == false) { // library marker kkossev.commonLib, line 195
parseGeneralCommandResponse(descMap) // library marker kkossev.commonLib, line 196
return // library marker kkossev.commonLib, line 197
} // library marker kkossev.commonLib, line 198
// // library marker kkossev.commonLib, line 199
if (standardAndCustomParseCluster(descMap, description)) { return } // library marker kkossev.commonLib, line 200
// // library marker kkossev.commonLib, line 201
switch (descMap.clusterInt as Integer) { // library marker kkossev.commonLib, line 202
case 0x000C : // special case : ZigUSB // Aqara TVOC Air Monitor; Aqara Cube T1 Pro; // library marker kkossev.commonLib, line 203
if (this.respondsTo('customParseAnalogInputClusterDescription')) { // library marker kkossev.commonLib, line 204
customParseAnalogInputClusterDescription(descMap, description) // ZigUSB // library marker kkossev.commonLib, line 205
descMap.remove('additionalAttrs')?.each { final Map map -> customParseAnalogInputClusterDescription(descMap + map, description) } // library marker kkossev.commonLib, line 206
} // library marker kkossev.commonLib, line 207
break // library marker kkossev.commonLib, line 208
case 0x0300 : // Patch - need refactoring of the standardParseColorControlCluster ! // library marker kkossev.commonLib, line 209
if (this.respondsTo('standardParseColorControlCluster')) { // library marker kkossev.commonLib, line 210
standardParseColorControlCluster(descMap, description) // library marker kkossev.commonLib, line 211
descMap.remove('additionalAttrs')?.each { final Map map -> standardParseColorControlCluster(descMap + map, description) } // library marker kkossev.commonLib, line 212
} // library marker kkossev.commonLib, line 213
break // library marker kkossev.commonLib, line 214
default: // library marker kkossev.commonLib, line 215
if (settings.logEnable) { // library marker kkossev.commonLib, line 216
logWarn "parse: zigbee received unknown cluster:${descMap.cluster} (${descMap.clusterInt}) message (${descMap})" // library marker kkossev.commonLib, line 217
} // library marker kkossev.commonLib, line 218
break // library marker kkossev.commonLib, line 219
} // library marker kkossev.commonLib, line 220
} // library marker kkossev.commonLib, line 221
@Field static final Map ClustersMap = [ // library marker kkossev.commonLib, line 223
0x0000: 'Basic', 0x0001: 'Power', 0x0003: 'Identify', 0x0004: 'Groups', 0x0005: 'Scenes', 0x0006: 'OnOff', 0x0007:'onOffConfiguration', 0x0008: 'LevelControl', // library marker kkossev.commonLib, line 224
0x000C: 'AnalogInput', 0x0012: 'MultistateInput', 0x0020: 'PollControl', 0x0102: 'WindowCovering', 0x0201: 'Thermostat', 0x0204: 'ThermostatConfig',/*0x0300: 'ColorControl',*/ // library marker kkossev.commonLib, line 225
0x0400: 'Illuminance', 0x0402: 'Temperature', 0x0405: 'Humidity', 0x0406: 'Occupancy', 0x042A: 'Pm25', 0x0500: 'IAS', 0x0702: 'Metering', // library marker kkossev.commonLib, line 226
0x0B04: 'ElectricalMeasure', 0xE001: 'E0001', 0xE002: 'E002', 0xEC03: 'EC03', 0xEF00: 'Tuya', 0xFC03: 'FC03', 0xFC11: 'FC11', 0xFC7E: 'AirQualityIndex', // Sensirion VOC index // library marker kkossev.commonLib, line 227
0xFCC0: 'XiaomiFCC0', // library marker kkossev.commonLib, line 228
] // library marker kkossev.commonLib, line 229
// first try calling the custom parser, if not found, call the standard parser // library marker kkossev.commonLib, line 231
/* groovylint-disable-next-line UnusedMethodParameter */ // library marker kkossev.commonLib, line 232
boolean standardAndCustomParseCluster(Map descMap, final String description) { // library marker kkossev.commonLib, line 233
Integer clusterInt = descMap.clusterInt as Integer // library marker kkossev.commonLib, line 234
String clusterName = ClustersMap[clusterInt] ?: UNKNOWN // library marker kkossev.commonLib, line 235
if (clusterName == null || clusterName == UNKNOWN) { // library marker kkossev.commonLib, line 236
logWarn "standardAndCustomParseCluster: zigbee received unknown cluster:0x${descMap.cluster} (${descMap.clusterInt}) message (${descMap})" // library marker kkossev.commonLib, line 237
return false // library marker kkossev.commonLib, line 238
} // library marker kkossev.commonLib, line 239
String customParser = "customParse${clusterName}Cluster" // library marker kkossev.commonLib, line 240
// check if a custom parser is defined in the custom driver. If found there, the standard parser should be called within that custom parser, if needed // library marker kkossev.commonLib, line 241
if (this.respondsTo(customParser)) { // library marker kkossev.commonLib, line 242
this."${customParser}"(descMap) // library marker kkossev.commonLib, line 243
descMap.remove('additionalAttrs')?.each { final Map map -> this."${customParser}"(descMap + map) } // library marker kkossev.commonLib, line 244
return true // library marker kkossev.commonLib, line 245
} // library marker kkossev.commonLib, line 246
String standardParser = "standardParse${clusterName}Cluster" // library marker kkossev.commonLib, line 247
// if no custom parser is defined, try the standard parser (if exists), eventually defined in the included library file // library marker kkossev.commonLib, line 248
if (this.respondsTo(standardParser)) { // library marker kkossev.commonLib, line 249
this."${standardParser}"(descMap) // library marker kkossev.commonLib, line 250
descMap.remove('additionalAttrs')?.each { final Map map -> this."${standardParser}"(descMap + map) } // library marker kkossev.commonLib, line 251
return true // library marker kkossev.commonLib, line 252
} // library marker kkossev.commonLib, line 253
if (device?.getDataValue('model') != 'ZigUSB' && descMap.cluster != '0300') { // patch! // library marker kkossev.commonLib, line 254
logWarn "standardAndCustomParseCluster: Missing ${standardParser} or ${customParser} handler for cluster:0x${descMap.cluster} (${descMap.clusterInt}) message (${descMap})" // library marker kkossev.commonLib, line 255
} // library marker kkossev.commonLib, line 256
return false // library marker kkossev.commonLib, line 257
} // library marker kkossev.commonLib, line 258
// not used - throws exception : error groovy.lang.MissingPropertyException: No such property: rxCtr for class: java.lang.String on line 1568 (method parse) // library marker kkossev.commonLib, line 260
private static void updateRxStats(final Map state) { // library marker kkossev.commonLib, line 261
if (state.stats != null) { state.stats['rxCtr'] = (state.stats['rxCtr'] ?: 0) + 1 } else { state.stats = [:] } // +5ms // library marker kkossev.commonLib, line 262
} // library marker kkossev.commonLib, line 263
public boolean isChattyDeviceReport(final Map descMap) { // when @CompileStatis is slower? // library marker kkossev.commonLib, line 265
if (_TRACE_ALL == true) { return false } // library marker kkossev.commonLib, line 266
if (this.respondsTo('isSpammyDPsToNotTrace')) { // defined in deviceProfileLib // library marker kkossev.commonLib, line 267
return isSpammyDPsToNotTrace(descMap) // library marker kkossev.commonLib, line 268
} // library marker kkossev.commonLib, line 269
return false // library marker kkossev.commonLib, line 270
} // library marker kkossev.commonLib, line 271
public boolean isSpammyDeviceReport(final Map descMap) { // library marker kkossev.commonLib, line 273
if (_TRACE_ALL == true) { return false } // library marker kkossev.commonLib, line 274
if (this.respondsTo('isSpammyDPsToIgnore')) { // defined in deviceProfileLib // library marker kkossev.commonLib, line 275
return isSpammyDPsToIgnore(descMap) // library marker kkossev.commonLib, line 276
} // library marker kkossev.commonLib, line 277
return false // library marker kkossev.commonLib, line 278
} // library marker kkossev.commonLib, line 279
// not used? // library marker kkossev.commonLib, line 281
public boolean isSpammyTuyaRadar() { // library marker kkossev.commonLib, line 282
if (_TRACE_ALL == true) { return false } // library marker kkossev.commonLib, line 283
if (this.respondsTo('isSpammyDeviceProfile'())) { // defined in deviceProfileLib // library marker kkossev.commonLib, line 284
return isSpammyDeviceProfile() // library marker kkossev.commonLib, line 285
} // library marker kkossev.commonLib, line 286
return false // library marker kkossev.commonLib, line 287
} // library marker kkossev.commonLib, line 288
@Field static final Map ZdoClusterEnum = [ // library marker kkossev.commonLib, line 290
0x0002: 'Node Descriptor Request', 0x0005: 'Active Endpoints Request', 0x0006: 'Match Descriptor Request', 0x0022: 'Unbind Request', 0x0013: 'Device announce', 0x0034: 'Management Leave Request', // library marker kkossev.commonLib, line 291
0x8002: 'Node Descriptor Response', 0x8004: 'Simple Descriptor Response', 0x8005: 'Active Endpoints Response', 0x801D: 'Extended Simple Descriptor Response', 0x801E: 'Extended Active Endpoint Response', // library marker kkossev.commonLib, line 292
0x8021: 'Bind Response', 0x8022: 'Unbind Response', 0x8023: 'Bind Register Response', 0x8034: 'Management Leave Response' // library marker kkossev.commonLib, line 293
] // library marker kkossev.commonLib, line 294
// ZDO (Zigbee Data Object) Clusters Parsing // library marker kkossev.commonLib, line 296
private void parseZdoClusters(final Map descMap) { // library marker kkossev.commonLib, line 297
if (state.stats == null) { state.stats = [:] } // library marker kkossev.commonLib, line 298
final Integer clusterId = descMap.clusterInt as Integer // library marker kkossev.commonLib, line 299
final String clusterName = ZdoClusterEnum[clusterId] ?: "UNKNOWN_CLUSTER (0x${descMap.clusterId})" // library marker kkossev.commonLib, line 300
final String statusHex = ((List)descMap.data)[1] // library marker kkossev.commonLib, line 301
final Integer statusCode = hexStrToUnsignedInt(statusHex) // library marker kkossev.commonLib, line 302
final String statusName = ZigbeeStatusEnum[statusCode] ?: "0x${statusHex}" // library marker kkossev.commonLib, line 303
final String clusterInfo = "${device.displayName} Received ZDO ${clusterName} (0x${descMap.clusterId}) status ${statusName}" // library marker kkossev.commonLib, line 304
List cmds = [] // library marker kkossev.commonLib, line 305
switch (clusterId) { // library marker kkossev.commonLib, line 306
case 0x0005 : // library marker kkossev.commonLib, line 307
state.stats['activeEpRqCtr'] = (state.stats['activeEpRqCtr'] ?: 0) + 1 // library marker kkossev.commonLib, line 308
if (settings?.logEnable) { log.debug "${clusterInfo}, data=${descMap.data} (Sequence Number:${descMap.data[0]}, data:${descMap.data})" } // library marker kkossev.commonLib, line 309
// send the active endpoint response // library marker kkossev.commonLib, line 310
cmds += ["he raw ${device.deviceNetworkId} 0 0 0x8005 {00 00 00 00 01 01} {0x0000}"] // library marker kkossev.commonLib, line 311
sendZigbeeCommands(cmds) // library marker kkossev.commonLib, line 312
break // library marker kkossev.commonLib, line 313
case 0x0006 : // library marker kkossev.commonLib, line 314
state.stats['matchDescCtr'] = (state.stats['matchDescCtr'] ?: 0) + 1 // library marker kkossev.commonLib, line 315
if (settings?.logEnable) { log.debug "${clusterInfo}, data=${descMap.data} (Sequence Number:${descMap.data[0]}, Input cluster count:${descMap.data[5]} Input cluster: 0x${descMap.data[7] + descMap.data[6]})" } // library marker kkossev.commonLib, line 316
cmds += ["he raw ${device.deviceNetworkId} 0 0 0x8006 {00 00 00 00 00} {0x0000}"] // library marker kkossev.commonLib, line 317
sendZigbeeCommands(cmds) // library marker kkossev.commonLib, line 318
break // library marker kkossev.commonLib, line 319
case 0x0013 : // device announcement // library marker kkossev.commonLib, line 320
state.stats['rejoinCtr'] = (state.stats['rejoinCtr'] ?: 0) + 1 // library marker kkossev.commonLib, line 321
if (settings?.logEnable) { log.debug "${clusterInfo}, rejoinCtr= ${state.stats['rejoinCtr']}, data=${descMap.data} (Sequence Number:${descMap.data[0]}, Device network ID: ${descMap.data[2] + descMap.data[1]}, Capability Information: ${descMap.data[11]})" } // library marker kkossev.commonLib, line 322
break // library marker kkossev.commonLib, line 323
case 0x8004 : // simple descriptor response // library marker kkossev.commonLib, line 324
if (settings?.logEnable) { log.debug "${clusterInfo}, data=${descMap.data} (Sequence Number:${descMap.data[0]}, status:${descMap.data[1]}, lenght:${hubitat.helper.HexUtils.hexStringToInt(descMap.data[4])}" } // library marker kkossev.commonLib, line 325
if (this.respondsTo('parseSimpleDescriptorResponse')) { parseSimpleDescriptorResponse(descMap) } // library marker kkossev.commonLib, line 326
break // library marker kkossev.commonLib, line 327
case 0x8005 : // endpoint response // library marker kkossev.commonLib, line 328
String endpointCount = descMap.data[4] // library marker kkossev.commonLib, line 329
String endpointList = descMap.data[5] // library marker kkossev.commonLib, line 330
if (settings?.logEnable) { log.debug "${clusterInfo}, (endpoint response) endpointCount = ${endpointCount} endpointList = ${endpointList}" } // library marker kkossev.commonLib, line 331
break // library marker kkossev.commonLib, line 332
case 0x8021 : // bind response // library marker kkossev.commonLib, line 333
if (settings?.logEnable) { log.debug "${clusterInfo}, data=${descMap.data} (Sequence Number:${descMap.data[0]}, Status: ${descMap.data[1] == '00' ? 'Success' : 'Failure'})" } // library marker kkossev.commonLib, line 334
break // library marker kkossev.commonLib, line 335
case 0x0002 : // Node Descriptor Request // library marker kkossev.commonLib, line 336
case 0x0036 : // Permit Joining Request // library marker kkossev.commonLib, line 337
case 0x8022 : // unbind request // library marker kkossev.commonLib, line 338
case 0x8034 : // leave response // library marker kkossev.commonLib, line 339
if (settings?.logEnable) { log.debug "${device.displayName} Unprocessed ZDO command: cluster=${descMap.clusterId} command=${descMap.command} attrId=${descMap.attrId} value=${descMap.value} data=${descMap.data}" } // library marker kkossev.commonLib, line 340
break // library marker kkossev.commonLib, line 341
default : // library marker kkossev.commonLib, line 342
if (settings?.logEnable) { log.warn "${device.displayName} Unprocessed ZDO command: cluster=${descMap.clusterId} command=${descMap.command} attrId=${descMap.attrId} value=${descMap.value} data=${descMap.data}" } // library marker kkossev.commonLib, line 343
break // library marker kkossev.commonLib, line 344
} // library marker kkossev.commonLib, line 345
if (this.respondsTo('customParseZdoClusters')) { customParseZdoClusters(descMap) } // library marker kkossev.commonLib, line 346
} // library marker kkossev.commonLib, line 347
// Zigbee General Command Parsing // library marker kkossev.commonLib, line 349
private void parseGeneralCommandResponse(final Map descMap) { // library marker kkossev.commonLib, line 350
final int commandId = hexStrToUnsignedInt(descMap.command) // library marker kkossev.commonLib, line 351
switch (commandId) { // library marker kkossev.commonLib, line 352
case 0x01: parseReadAttributeResponse(descMap); break // library marker kkossev.commonLib, line 353
case 0x04: parseWriteAttributeResponse(descMap); break // library marker kkossev.commonLib, line 354
case 0x07: parseConfigureResponse(descMap); break // library marker kkossev.commonLib, line 355
case 0x09: parseReadReportingConfigResponse(descMap); break // library marker kkossev.commonLib, line 356
case 0x0B: parseDefaultCommandResponse(descMap); break // library marker kkossev.commonLib, line 357
default: // library marker kkossev.commonLib, line 358
final String commandName = ZigbeeGeneralCommandEnum[commandId] ?: "UNKNOWN_COMMAND (0x${descMap.command})" // library marker kkossev.commonLib, line 359
final String clusterName = clusterLookup(descMap.clusterInt) // library marker kkossev.commonLib, line 360
final String status = descMap.data in List ? ((List)descMap.data).last() : descMap.data // library marker kkossev.commonLib, line 361
final int statusCode = hexStrToUnsignedInt(status) // library marker kkossev.commonLib, line 362
final String statusName = ZigbeeStatusEnum[statusCode] ?: "0x${status}" // library marker kkossev.commonLib, line 363
if (statusCode > 0x00) { // library marker kkossev.commonLib, line 364
log.warn "zigbee ${commandName} ${clusterName} error: ${statusName}" // library marker kkossev.commonLib, line 365
} else if (settings.logEnable) { // library marker kkossev.commonLib, line 366
log.trace "zigbee ${commandName} ${clusterName}: ${descMap.data}" // library marker kkossev.commonLib, line 367
} // library marker kkossev.commonLib, line 368
break // library marker kkossev.commonLib, line 369
} // library marker kkossev.commonLib, line 370
} // library marker kkossev.commonLib, line 371
// Zigbee Read Attribute Response Parsing // library marker kkossev.commonLib, line 373
private void parseReadAttributeResponse(final Map descMap) { // library marker kkossev.commonLib, line 374
final List data = descMap.data as List // library marker kkossev.commonLib, line 375
final String attribute = data[1] + data[0] // library marker kkossev.commonLib, line 376
final int statusCode = hexStrToUnsignedInt(data[2]) // library marker kkossev.commonLib, line 377
final String status = ZigbeeStatusEnum[statusCode] ?: "0x${data}" // library marker kkossev.commonLib, line 378
if (statusCode > 0x00) { // library marker kkossev.commonLib, line 379
logWarn "zigbee read ${clusterLookup(descMap.clusterInt)} attribute 0x${attribute} error: ${status}" // library marker kkossev.commonLib, line 380
} // library marker kkossev.commonLib, line 381
else { // library marker kkossev.commonLib, line 382
logDebug "zigbee read ${clusterLookup(descMap.clusterInt)} attribute 0x${attribute} response: ${status} ${data}" // library marker kkossev.commonLib, line 383
} // library marker kkossev.commonLib, line 384
} // library marker kkossev.commonLib, line 385
// Zigbee Write Attribute Response Parsing // library marker kkossev.commonLib, line 387
private void parseWriteAttributeResponse(final Map descMap) { // library marker kkossev.commonLib, line 388
final String data = descMap.data in List ? ((List)descMap.data).first() : descMap.data // library marker kkossev.commonLib, line 389
final int statusCode = hexStrToUnsignedInt(data) // library marker kkossev.commonLib, line 390
final String statusName = ZigbeeStatusEnum[statusCode] ?: "0x${data}" // library marker kkossev.commonLib, line 391
if (statusCode > 0x00) { // library marker kkossev.commonLib, line 392
logWarn "zigbee response write ${clusterLookup(descMap.clusterInt)} attribute error: ${statusName}" // library marker kkossev.commonLib, line 393
} // library marker kkossev.commonLib, line 394
else { // library marker kkossev.commonLib, line 395
logDebug "zigbee response write ${clusterLookup(descMap.clusterInt)} attribute response: ${statusName}" // library marker kkossev.commonLib, line 396
} // library marker kkossev.commonLib, line 397
} // library marker kkossev.commonLib, line 398
// Zigbee Configure Reporting Response Parsing - command 0x07 // library marker kkossev.commonLib, line 400
private void parseConfigureResponse(final Map descMap) { // library marker kkossev.commonLib, line 401
// TODO - parse the details of the configuration respose - cluster, min, max, delta ... // library marker kkossev.commonLib, line 402
final String status = ((List)descMap.data).first() // library marker kkossev.commonLib, line 403
final int statusCode = hexStrToUnsignedInt(status) // library marker kkossev.commonLib, line 404
if (statusCode == 0x00 && settings.enableReporting != false) { // library marker kkossev.commonLib, line 405
state.reportingEnabled = true // library marker kkossev.commonLib, line 406
} // library marker kkossev.commonLib, line 407
final String statusName = ZigbeeStatusEnum[statusCode] ?: "0x${status}" // library marker kkossev.commonLib, line 408
if (statusCode > 0x00) { // library marker kkossev.commonLib, line 409
log.warn "zigbee configure reporting error: ${statusName} ${descMap.data}" // library marker kkossev.commonLib, line 410
} else { // library marker kkossev.commonLib, line 411
logDebug "zigbee configure reporting response: ${statusName} ${descMap.data}" // library marker kkossev.commonLib, line 412
} // library marker kkossev.commonLib, line 413
} // library marker kkossev.commonLib, line 414
// Parses the response of reading reporting configuration - command 0x09 // library marker kkossev.commonLib, line 416
private void parseReadReportingConfigResponse(final Map descMap) { // library marker kkossev.commonLib, line 417
int status = zigbee.convertHexToInt(descMap.data[0]) // Status: Success (0x00) // library marker kkossev.commonLib, line 418
//def attr = zigbee.convertHexToInt(descMap.data[3])*256 + zigbee.convertHexToInt(descMap.data[2]) // Attribute: OnOff (0x0000) // library marker kkossev.commonLib, line 419
if (status == 0) { // library marker kkossev.commonLib, line 420
//def dataType = zigbee.convertHexToInt(descMap.data[4]) // Data Type: Boolean (0x10) // library marker kkossev.commonLib, line 421
int min = zigbee.convertHexToInt(descMap.data[6]) * 256 + zigbee.convertHexToInt(descMap.data[5]) // library marker kkossev.commonLib, line 422
int max = zigbee.convertHexToInt(descMap.data[8] + descMap.data[7]) // library marker kkossev.commonLib, line 423
int delta = 0 // library marker kkossev.commonLib, line 424
if (descMap.data.size() >= 10) { // library marker kkossev.commonLib, line 425
delta = zigbee.convertHexToInt(descMap.data[10] + descMap.data[9]) // library marker kkossev.commonLib, line 426
} // library marker kkossev.commonLib, line 427
else { // library marker kkossev.commonLib, line 428
logTrace "descMap.data.size = ${descMap.data.size()}" // library marker kkossev.commonLib, line 429
} // library marker kkossev.commonLib, line 430
logDebug "Received Read Reporting Configuration Response (0x09) for cluster:${descMap.clusterId} attribute:${descMap.data[3] + descMap.data[2]}, data=${descMap.data} (Status: ${descMap.data[0] == '00' ? 'Success' : 'Failure'}) min=${min} max=${max} delta=${delta}" // library marker kkossev.commonLib, line 431
} // library marker kkossev.commonLib, line 432
else { // library marker kkossev.commonLib, line 433
logWarn "Not Found (0x8b) Read Reporting Configuration Response for cluster:${descMap.clusterId} attribute:${descMap.data[3] + descMap.data[2]}, data=${descMap.data} (Status: ${descMap.data[0] == '00' ? 'Success' : 'Failure'})" // library marker kkossev.commonLib, line 434
} // library marker kkossev.commonLib, line 435
} // library marker kkossev.commonLib, line 436
private Boolean executeCustomHandler(String handlerName, Object handlerArgs) { // library marker kkossev.commonLib, line 438
if (!this.respondsTo(handlerName)) { // library marker kkossev.commonLib, line 439
logTrace "executeCustomHandler: function ${handlerName} not found" // library marker kkossev.commonLib, line 440
return false // library marker kkossev.commonLib, line 441
} // library marker kkossev.commonLib, line 442
// execute the customHandler function // library marker kkossev.commonLib, line 443
Boolean result = false // library marker kkossev.commonLib, line 444
try { // library marker kkossev.commonLib, line 445
result = "$handlerName"(handlerArgs) // library marker kkossev.commonLib, line 446
} // library marker kkossev.commonLib, line 447
catch (e) { // library marker kkossev.commonLib, line 448
logWarn "executeCustomHandler: Exception '${e}'caught while processing $handlerName($handlerArgs) (val=${fncmd}))" // library marker kkossev.commonLib, line 449
return false // library marker kkossev.commonLib, line 450
} // library marker kkossev.commonLib, line 451
//logDebug "customSetFunction result is ${fncmd}" // library marker kkossev.commonLib, line 452
return result // library marker kkossev.commonLib, line 453
} // library marker kkossev.commonLib, line 454
// Zigbee Default Command Response Parsing // library marker kkossev.commonLib, line 456
private void parseDefaultCommandResponse(final Map descMap) { // library marker kkossev.commonLib, line 457
final List data = descMap.data as List // library marker kkossev.commonLib, line 458
final String commandId = data[0] // library marker kkossev.commonLib, line 459
final int statusCode = hexStrToUnsignedInt(data[1]) // library marker kkossev.commonLib, line 460
final String status = ZigbeeStatusEnum[statusCode] ?: "0x${data[1]}" // library marker kkossev.commonLib, line 461
if (statusCode > 0x00) { // library marker kkossev.commonLib, line 462
logWarn "zigbee ${clusterLookup(descMap.clusterInt)} command 0x${commandId} error: ${status}" // library marker kkossev.commonLib, line 463
} else { // library marker kkossev.commonLib, line 464
logDebug "zigbee ${clusterLookup(descMap.clusterInt)} command 0x${commandId} response: ${status}" // library marker kkossev.commonLib, line 465
// ZigUSB has its own interpretation of the Zigbee standards ... :( // library marker kkossev.commonLib, line 466
if (this.respondsTo('customParseDefaultCommandResponse')) { // library marker kkossev.commonLib, line 467
customParseDefaultCommandResponse(descMap) // library marker kkossev.commonLib, line 468
} // library marker kkossev.commonLib, line 469
} // library marker kkossev.commonLib, line 470
} // library marker kkossev.commonLib, line 471
// Zigbee Attribute IDs // library marker kkossev.commonLib, line 473
@Field static final int ATTRIBUTE_READING_INFO_SET = 0x0000 // library marker kkossev.commonLib, line 474
@Field static final int FIRMWARE_VERSION_ID = 0x4000 // library marker kkossev.commonLib, line 475
@Field static final int PING_ATTR_ID = 0x01 // library marker kkossev.commonLib, line 476
@Field static final Map ZigbeeStatusEnum = [ // library marker kkossev.commonLib, line 478
0x00: 'Success', 0x01: 'Failure', 0x02: 'Not Authorized', 0x80: 'Malformed Command', 0x81: 'Unsupported COMMAND', 0x85: 'Invalid Field', 0x86: 'Unsupported Attribute', 0x87: 'Invalid Value', 0x88: 'Read Only', // library marker kkossev.commonLib, line 479
0x89: 'Insufficient Space', 0x8A: 'Duplicate Exists', 0x8B: 'Not Found', 0x8C: 'Unreportable Attribute', 0x8D: 'Invalid Data Type', 0x8E: 'Invalid Selector', 0x94: 'Time out', 0x9A: 'Notification Pending', 0xC3: 'Unsupported Cluster' // library marker kkossev.commonLib, line 480
] // library marker kkossev.commonLib, line 481
@Field static final Map ZigbeeGeneralCommandEnum = [ // library marker kkossev.commonLib, line 483
0x00: 'Read Attributes', 0x01: 'Read Attributes Response', 0x02: 'Write Attributes', 0x03: 'Write Attributes Undivided', 0x04: 'Write Attributes Response', 0x05: 'Write Attributes No Response', 0x06: 'Configure Reporting', // library marker kkossev.commonLib, line 484
0x07: 'Configure Reporting Response', 0x08: 'Read Reporting Configuration', 0x09: 'Read Reporting Configuration Response', 0x0A: 'Report Attributes', 0x0B: 'Default Response', 0x0C: 'Discover Attributes', 0x0D: 'Discover Attributes Response', // library marker kkossev.commonLib, line 485
0x0E: 'Read Attributes Structured', 0x0F: 'Write Attributes Structured', 0x10: 'Write Attributes Structured Response', 0x11: 'Discover Commands Received', 0x12: 'Discover Commands Received Response', 0x13: 'Discover Commands Generated', // library marker kkossev.commonLib, line 486
0x14: 'Discover Commands Generated Response', 0x15: 'Discover Attributes Extended', 0x16: 'Discover Attributes Extended Response' // library marker kkossev.commonLib, line 487
] // library marker kkossev.commonLib, line 488
@Field static final int ROLLING_AVERAGE_N = 10 // library marker kkossev.commonLib, line 490
private BigDecimal approxRollingAverage(BigDecimal avgPar, BigDecimal newSample) { // library marker kkossev.commonLib, line 491
BigDecimal avg = avgPar // library marker kkossev.commonLib, line 492
if (avg == null || avg == 0) { avg = newSample } // library marker kkossev.commonLib, line 493
avg -= avg / ROLLING_AVERAGE_N // library marker kkossev.commonLib, line 494
avg += newSample / ROLLING_AVERAGE_N // library marker kkossev.commonLib, line 495
return avg // library marker kkossev.commonLib, line 496
} // library marker kkossev.commonLib, line 497
private void handlePingResponse() { // library marker kkossev.commonLib, line 499
Long now = new Date().getTime() // library marker kkossev.commonLib, line 500
if (state.lastRx == null) { state.lastRx = [:] } // library marker kkossev.commonLib, line 501
state.lastRx['checkInTime'] = now // library marker kkossev.commonLib, line 502
int timeRunning = now.toInteger() - (state.lastTx['pingTime'] ?: '0').toInteger() // library marker kkossev.commonLib, line 504
if (timeRunning > 0 && timeRunning < MAX_PING_MILISECONDS) { // library marker kkossev.commonLib, line 505
state.stats['pingsOK'] = (state.stats['pingsOK'] ?: 0) + 1 // library marker kkossev.commonLib, line 506
if (timeRunning < safeToInt((state.stats['pingsMin'] ?: '999'))) { state.stats['pingsMin'] = timeRunning } // library marker kkossev.commonLib, line 507
if (timeRunning > safeToInt((state.stats['pingsMax'] ?: '0'))) { state.stats['pingsMax'] = timeRunning } // library marker kkossev.commonLib, line 508
state.stats['pingsAvg'] = approxRollingAverage(safeToDouble(state.stats['pingsAvg']), safeToDouble(timeRunning)) as int // library marker kkossev.commonLib, line 509
sendRttEvent() // library marker kkossev.commonLib, line 510
} // library marker kkossev.commonLib, line 511
else { // library marker kkossev.commonLib, line 512
logWarn "unexpected ping timeRunning=${timeRunning} " // library marker kkossev.commonLib, line 513
} // library marker kkossev.commonLib, line 514
state.states['isPing'] = false // library marker kkossev.commonLib, line 515
} // library marker kkossev.commonLib, line 516
/* // library marker kkossev.commonLib, line 518
* ----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 519
* Standard clusters reporting handlers // library marker kkossev.commonLib, line 520
* ----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 521
*/ // library marker kkossev.commonLib, line 522
@Field static final Map powerSourceOpts = [ defaultValue: 0, options: [0: 'unknown', 1: 'mains', 2: 'mains', 3: 'battery', 4: 'dc', 5: 'emergency mains', 6: 'emergency mains']] // library marker kkossev.commonLib, line 523
// Zigbee Basic Cluster Parsing 0x0000 - called from the main parse method // library marker kkossev.commonLib, line 525
private void standardParseBasicCluster(final Map descMap) { // library marker kkossev.commonLib, line 526
Long now = new Date().getTime() // library marker kkossev.commonLib, line 527
if (state.lastRx == null) { state.lastRx = [:] } // library marker kkossev.commonLib, line 528
state.lastRx['checkInTime'] = now // library marker kkossev.commonLib, line 529
boolean isPing = state.states?.isPing ?: false // library marker kkossev.commonLib, line 530
switch (descMap.attrInt as Integer) { // library marker kkossev.commonLib, line 531
case 0x0000: // library marker kkossev.commonLib, line 532
logDebug "Basic cluster: ZCLVersion = ${descMap?.value}" // library marker kkossev.commonLib, line 533
break // library marker kkossev.commonLib, line 534
case PING_ATTR_ID: // 0x01 - Using 0x01 read as a simple ping/pong mechanism // library marker kkossev.commonLib, line 535
if (isPing) { // library marker kkossev.commonLib, line 536
handlePingResponse() // library marker kkossev.commonLib, line 537
} // library marker kkossev.commonLib, line 538
else { // library marker kkossev.commonLib, line 539
logTrace "Tuya check-in message (attribute ${descMap.attrId} reported: ${descMap.value})" // library marker kkossev.commonLib, line 540
} // library marker kkossev.commonLib, line 541
break // library marker kkossev.commonLib, line 542
case 0x0004: // library marker kkossev.commonLib, line 543
logDebug "received device manufacturer ${descMap?.value}" // library marker kkossev.commonLib, line 544
// received device manufacturer IKEA of Sweden // library marker kkossev.commonLib, line 545
String manufacturer = device.getDataValue('manufacturer') // library marker kkossev.commonLib, line 546
if ((manufacturer == null || manufacturer == 'unknown') && (descMap?.value != null)) { // library marker kkossev.commonLib, line 547
logWarn "updating device manufacturer from ${manufacturer} to ${descMap?.value}" // library marker kkossev.commonLib, line 548
device.updateDataValue('manufacturer', descMap?.value) // library marker kkossev.commonLib, line 549
} // library marker kkossev.commonLib, line 550
break // library marker kkossev.commonLib, line 551
case 0x0005: // library marker kkossev.commonLib, line 552
if (isPing) { // library marker kkossev.commonLib, line 553
handlePingResponse() // library marker kkossev.commonLib, line 554
} // library marker kkossev.commonLib, line 555
else { // library marker kkossev.commonLib, line 556
logDebug "received device model ${descMap?.value}" // library marker kkossev.commonLib, line 557
// received device model Remote Control N2 // library marker kkossev.commonLib, line 558
String model = device.getDataValue('model') // library marker kkossev.commonLib, line 559
if ((model == null || model == 'unknown') && (descMap?.value != null)) { // library marker kkossev.commonLib, line 560
logWarn "updating device model from ${model} to ${descMap?.value}" // library marker kkossev.commonLib, line 561
device.updateDataValue('model', descMap?.value) // library marker kkossev.commonLib, line 562
} // library marker kkossev.commonLib, line 563
} // library marker kkossev.commonLib, line 564
break // library marker kkossev.commonLib, line 565
case 0x0007: // library marker kkossev.commonLib, line 566
String powerSourceReported = powerSourceOpts.options[descMap?.value as int] // library marker kkossev.commonLib, line 567
logDebug "received Power source ${powerSourceReported} (${descMap?.value})" // library marker kkossev.commonLib, line 568
String currentPowerSource = device.getDataValue('powerSource') // library marker kkossev.commonLib, line 569
if (currentPowerSource == null || currentPowerSource == 'unknown') { // library marker kkossev.commonLib, line 570
logInfo "updating device powerSource from ${currentPowerSource} to ${powerSourceReported}" // library marker kkossev.commonLib, line 571
sendEvent(name: 'powerSource', value: powerSourceReported, type: 'physical') // library marker kkossev.commonLib, line 572
} // library marker kkossev.commonLib, line 573
break // library marker kkossev.commonLib, line 574
case 0xFFDF: // library marker kkossev.commonLib, line 575
logDebug "Tuya check-in (Cluster Revision=${descMap?.value})" // library marker kkossev.commonLib, line 576
break // library marker kkossev.commonLib, line 577
case 0xFFE2: // library marker kkossev.commonLib, line 578
logDebug "Tuya check-in (AppVersion=${descMap?.value})" // library marker kkossev.commonLib, line 579
break // library marker kkossev.commonLib, line 580
case [0xFFE0, 0xFFE1, 0xFFE3, 0xFFE4] : // library marker kkossev.commonLib, line 581
logTrace "Tuya attribute ${descMap?.attrId} value=${descMap?.value}" // library marker kkossev.commonLib, line 582
break // library marker kkossev.commonLib, line 583
case 0xFFFE: // library marker kkossev.commonLib, line 584
logTrace "Tuya attributeReportingStatus (attribute FFFE) value=${descMap?.value}" // library marker kkossev.commonLib, line 585
break // library marker kkossev.commonLib, line 586
case FIRMWARE_VERSION_ID: // 0x4000 // library marker kkossev.commonLib, line 587
final String version = descMap.value ?: 'unknown' // library marker kkossev.commonLib, line 588
log.info "device firmware version is ${version}" // library marker kkossev.commonLib, line 589
updateDataValue('softwareBuild', version) // library marker kkossev.commonLib, line 590
break // library marker kkossev.commonLib, line 591
default: // library marker kkossev.commonLib, line 592
logWarn "zigbee received unknown Basic cluster attribute 0x${descMap.attrId} (value ${descMap.value})" // library marker kkossev.commonLib, line 593
break // library marker kkossev.commonLib, line 594
} // library marker kkossev.commonLib, line 595
} // library marker kkossev.commonLib, line 596
private void standardParsePollControlCluster(final Map descMap) { // library marker kkossev.commonLib, line 598
switch (descMap.attrInt as Integer) { // library marker kkossev.commonLib, line 599
case 0x0000: logDebug "PollControl cluster: CheckInInterval = ${descMap?.value}" ; break // library marker kkossev.commonLib, line 600
case 0x0001: logDebug "PollControl cluster: LongPollInterval = ${descMap?.value}" ; break // library marker kkossev.commonLib, line 601
case 0x0002: logDebug "PollControl cluster: ShortPollInterval = ${descMap?.value}" ; break // library marker kkossev.commonLib, line 602
case 0x0003: logDebug "PollControl cluster: FastPollTimeout = ${descMap?.value}" ; break // library marker kkossev.commonLib, line 603
case 0x0004: logDebug "PollControl cluster: CheckInIntervalMin = ${descMap?.value}" ; break // library marker kkossev.commonLib, line 604
case 0x0005: logDebug "PollControl cluster: LongPollIntervalMin = ${descMap?.value}" ; break // library marker kkossev.commonLib, line 605
case 0x0006: logDebug "PollControl cluster: FastPollTimeoutMax = ${descMap?.value}" ; break // library marker kkossev.commonLib, line 606
default: logWarn "zigbee received unknown PollControl cluster attribute 0x${descMap.attrId} (value ${descMap.value})" ; break // library marker kkossev.commonLib, line 607
} // library marker kkossev.commonLib, line 608
} // library marker kkossev.commonLib, line 609
public void clearIsDigital() { state.states['isDigital'] = false } // library marker kkossev.commonLib, line 611
void switchDebouncingClear() { state.states['debounce'] = false } // library marker kkossev.commonLib, line 612
void isRefreshRequestClear() { state.states['isRefresh'] = false } // library marker kkossev.commonLib, line 613
Map myParseDescriptionAsMap(String description) { // library marker kkossev.commonLib, line 615
Map descMap = [:] // library marker kkossev.commonLib, line 616
try { // library marker kkossev.commonLib, line 617
descMap = zigbee.parseDescriptionAsMap(description) // library marker kkossev.commonLib, line 618
} // library marker kkossev.commonLib, line 619
catch (e1) { // library marker kkossev.commonLib, line 620
logWarn "exception ${e1} caught while parseDescriptionAsMap myParseDescriptionAsMap description: ${description}" // library marker kkossev.commonLib, line 621
// try alternative custom parsing // library marker kkossev.commonLib, line 622
descMap = [:] // library marker kkossev.commonLib, line 623
try { // library marker kkossev.commonLib, line 624
descMap += description.replaceAll('\\[|\\]', '').split(',').collectEntries { entry -> // library marker kkossev.commonLib, line 625
List pair = entry.split(':') // library marker kkossev.commonLib, line 626
[(pair.first().trim()): pair.last().trim()] // library marker kkossev.commonLib, line 627
} // library marker kkossev.commonLib, line 628
} // library marker kkossev.commonLib, line 629
catch (e2) { // library marker kkossev.commonLib, line 630
logWarn "exception ${e2} caught while parsing using an alternative method myParseDescriptionAsMap description: ${description}" // library marker kkossev.commonLib, line 631
return [:] // library marker kkossev.commonLib, line 632
} // library marker kkossev.commonLib, line 633
logDebug "alternative method parsing success: descMap=${descMap}" // library marker kkossev.commonLib, line 634
} // library marker kkossev.commonLib, line 635
return descMap // library marker kkossev.commonLib, line 636
} // library marker kkossev.commonLib, line 637
// return true if the messages is processed here, and further processing in the main parse method should be cancelled ! // library marker kkossev.commonLib, line 639
// return false if the cluster is not a Tuya cluster // library marker kkossev.commonLib, line 640
private boolean isTuyaE00xCluster(String description) { // library marker kkossev.commonLib, line 641
if (description == null || !(description.indexOf('cluster: E000') >= 0 || description.indexOf('cluster: E001') >= 0)) { // library marker kkossev.commonLib, line 642
return false // library marker kkossev.commonLib, line 643
} // library marker kkossev.commonLib, line 644
// try to parse ... // library marker kkossev.commonLib, line 645
//logDebug "Tuya cluster: E000 or E001 - try to parse it..." // library marker kkossev.commonLib, line 646
Map descMap = [:] // library marker kkossev.commonLib, line 647
try { // library marker kkossev.commonLib, line 648
descMap = zigbee.parseDescriptionAsMap(description) // library marker kkossev.commonLib, line 649
logDebug "TuyaE00xCluster Desc Map: ${descMap}" // library marker kkossev.commonLib, line 650
} // library marker kkossev.commonLib, line 651
catch (e) { // library marker kkossev.commonLib, line 652
logDebug "exception caught while parsing description: ${description}" // library marker kkossev.commonLib, line 653
logDebug "TuyaE00xCluster Desc Map: ${descMap}" // library marker kkossev.commonLib, line 654
// cluster E001 is the one that is generating exceptions... // library marker kkossev.commonLib, line 655
return true // library marker kkossev.commonLib, line 656
} // library marker kkossev.commonLib, line 657
if (descMap.cluster == 'E000' && descMap.attrId in ['D001', 'D002', 'D003']) { // library marker kkossev.commonLib, line 659
logDebug "Tuya Specific cluster ${descMap.cluster} attribute ${descMap.attrId} value is ${descMap.value}" // library marker kkossev.commonLib, line 660
} // library marker kkossev.commonLib, line 661
else if (descMap.cluster == 'E001' && descMap.attrId == 'D010') { // library marker kkossev.commonLib, line 662
if (settings?.logEnable) { logInfo "power on behavior is ${powerOnBehaviourOptions[safeToInt(descMap.value).toString()]} (${descMap.value})" } // library marker kkossev.commonLib, line 663
} // library marker kkossev.commonLib, line 664
else if (descMap.cluster == 'E001' && descMap.attrId == 'D030') { // library marker kkossev.commonLib, line 665
if (settings?.logEnable) { logInfo "swith type is ${switchTypeOptions[safeToInt(descMap.value).toString()]} (${descMap.value})" } // library marker kkossev.commonLib, line 666
} // library marker kkossev.commonLib, line 667
else { // library marker kkossev.commonLib, line 668
logDebug "unprocessed TuyaE00xCluster Desc Map: $descMap" // library marker kkossev.commonLib, line 669
return false // library marker kkossev.commonLib, line 670
} // library marker kkossev.commonLib, line 671
return true // processed // library marker kkossev.commonLib, line 672
} // library marker kkossev.commonLib, line 673
// return true if processed here, and further processing in the main parse method should be cancelled ! // library marker kkossev.commonLib, line 675
private boolean otherTuyaOddities(final String description) { // library marker kkossev.commonLib, line 676
/* // library marker kkossev.commonLib, line 677
if (description.indexOf('cluster: 0000') >= 0 && description.indexOf('attrId: 0004') >= 0) { // library marker kkossev.commonLib, line 678
if (logEnable) log.debug "${device.displayName} skipping Tuya parse of cluster 0 attrId 4" // parseDescriptionAsMap throws exception when processing Tuya cluster 0 attrId 4 // library marker kkossev.commonLib, line 679
return true // library marker kkossev.commonLib, line 680
} // library marker kkossev.commonLib, line 681
*/ // library marker kkossev.commonLib, line 682
Map descMap = [:] // library marker kkossev.commonLib, line 683
try { // library marker kkossev.commonLib, line 684
descMap = zigbee.parseDescriptionAsMap(description) // library marker kkossev.commonLib, line 685
} // library marker kkossev.commonLib, line 686
catch (e1) { // library marker kkossev.commonLib, line 687
logWarn "exception ${e1} caught while parseDescriptionAsMap otherTuyaOddities description: ${description}" // library marker kkossev.commonLib, line 688
// try alternative custom parsing // library marker kkossev.commonLib, line 689
descMap = [:] // library marker kkossev.commonLib, line 690
try { // library marker kkossev.commonLib, line 691
descMap += description.replaceAll('\\[|\\]', '').split(',').collectEntries { entry -> // library marker kkossev.commonLib, line 692
List pair = entry.split(':') // library marker kkossev.commonLib, line 693
[(pair.first().trim()): pair.last().trim()] // library marker kkossev.commonLib, line 694
} // library marker kkossev.commonLib, line 695
} // library marker kkossev.commonLib, line 696
catch (e2) { // library marker kkossev.commonLib, line 697
logWarn "exception ${e2} caught while parsing using an alternative method otherTuyaOddities description: ${description}" // library marker kkossev.commonLib, line 698
return true // library marker kkossev.commonLib, line 699
} // library marker kkossev.commonLib, line 700
logDebug "alternative method parsing success: descMap=${descMap}" // library marker kkossev.commonLib, line 701
} // library marker kkossev.commonLib, line 702
//if (logEnable) {log.trace "${device.displayName} Checking Tuya Oddities Desc Map: $descMap"} // library marker kkossev.commonLib, line 703
if (descMap.attrId == null) { // library marker kkossev.commonLib, line 704
//logDebug "otherTuyaOddities: descMap = ${descMap}" // library marker kkossev.commonLib, line 705
//if (logEnable) log.trace "${device.displayName} otherTuyaOddities - Cluster ${descMap.clusterId} NO ATTRIBUTE, skipping" // library marker kkossev.commonLib, line 706
return false // library marker kkossev.commonLib, line 707
} // library marker kkossev.commonLib, line 708
boolean bWasAtLeastOneAttributeProcessed = false // library marker kkossev.commonLib, line 709
boolean bWasThereAnyStandardAttribite = false // library marker kkossev.commonLib, line 710
// attribute report received // library marker kkossev.commonLib, line 711
List attrData = [[cluster: descMap.cluster ,attrId: descMap.attrId, value: descMap.value, status: descMap.status]] // library marker kkossev.commonLib, line 712
descMap.additionalAttrs.each { // library marker kkossev.commonLib, line 713
attrData << [cluster: descMap.cluster, attrId: it.attrId, value: it.value, status: it.status] // library marker kkossev.commonLib, line 714
} // library marker kkossev.commonLib, line 715
attrData.each { // library marker kkossev.commonLib, line 716
if (it.status == '86') { // library marker kkossev.commonLib, line 717
logWarn "Tuya Cluster ${descMap.cluster} unsupported attrId ${it.attrId}" // library marker kkossev.commonLib, line 718
// TODO - skip parsing? // library marker kkossev.commonLib, line 719
} // library marker kkossev.commonLib, line 720
switch (it.cluster) { // library marker kkossev.commonLib, line 721
case '0000' : // library marker kkossev.commonLib, line 722
if (it.attrId in ['FFE0', 'FFE1', 'FFE2', 'FFE4']) { // library marker kkossev.commonLib, line 723
logTrace "Cluster ${descMap.cluster} Tuya specific attrId ${it.attrId} value ${it.value})" // library marker kkossev.commonLib, line 724
bWasAtLeastOneAttributeProcessed = true // library marker kkossev.commonLib, line 725
} // library marker kkossev.commonLib, line 726
else if (it.attrId in ['FFFE', 'FFDF']) { // library marker kkossev.commonLib, line 727
logTrace "Cluster ${descMap.cluster} Tuya specific attrId ${it.attrId} value ${it.value})" // library marker kkossev.commonLib, line 728
bWasAtLeastOneAttributeProcessed = true // library marker kkossev.commonLib, line 729
} // library marker kkossev.commonLib, line 730
else { // library marker kkossev.commonLib, line 731
//logDebug "otherTuyaOddities? - Cluster ${descMap.cluster} attrId ${it.attrId} value ${it.value}) N/A, skipping" // library marker kkossev.commonLib, line 732
bWasThereAnyStandardAttribite = true // library marker kkossev.commonLib, line 733
} // library marker kkossev.commonLib, line 734
break // library marker kkossev.commonLib, line 735
default : // library marker kkossev.commonLib, line 736
//if (logEnable) log.trace "${device.displayName} otherTuyaOddities - Cluster ${it.cluster} N/A, skipping" // library marker kkossev.commonLib, line 737
break // library marker kkossev.commonLib, line 738
} // switch // library marker kkossev.commonLib, line 739
} // for each attribute // library marker kkossev.commonLib, line 740
return bWasAtLeastOneAttributeProcessed && !bWasThereAnyStandardAttribite // library marker kkossev.commonLib, line 741
} // library marker kkossev.commonLib, line 742
public String intTo16bitUnsignedHex(int value) { // library marker kkossev.commonLib, line 744
String hexStr = zigbee.convertToHexString(value.toInteger(), 4) // library marker kkossev.commonLib, line 745
return new String(hexStr.substring(2, 4) + hexStr.substring(0, 2)) // library marker kkossev.commonLib, line 746
} // library marker kkossev.commonLib, line 747
public String intTo8bitUnsignedHex(int value) { // library marker kkossev.commonLib, line 749
return zigbee.convertToHexString(value.toInteger(), 2) // library marker kkossev.commonLib, line 750
} // library marker kkossev.commonLib, line 751
/* // library marker kkossev.commonLib, line 753
* ----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 754
* Tuya cluster EF00 specific code // library marker kkossev.commonLib, line 755
* ----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 756
*/ // library marker kkossev.commonLib, line 757
private static int getCLUSTER_TUYA() { 0xEF00 } // library marker kkossev.commonLib, line 758
private static int getSETDATA() { 0x00 } // library marker kkossev.commonLib, line 759
private static int getSETTIME() { 0x24 } // library marker kkossev.commonLib, line 760
// Tuya Commands // library marker kkossev.commonLib, line 762
private static int getTUYA_REQUEST() { 0x00 } // library marker kkossev.commonLib, line 763
private static int getTUYA_REPORTING() { 0x01 } // library marker kkossev.commonLib, line 764
private static int getTUYA_QUERY() { 0x02 } // library marker kkossev.commonLib, line 765
private static int getTUYA_STATUS_SEARCH() { 0x06 } // library marker kkossev.commonLib, line 766
private static int getTUYA_TIME_SYNCHRONISATION() { 0x24 } // library marker kkossev.commonLib, line 767
// tuya DP type // library marker kkossev.commonLib, line 769
private static String getDP_TYPE_RAW() { '01' } // [ bytes ] // library marker kkossev.commonLib, line 770
private static String getDP_TYPE_BOOL() { '01' } // [ 0/1 ] // library marker kkossev.commonLib, line 771
private static String getDP_TYPE_VALUE() { '02' } // [ 4 byte value ] // library marker kkossev.commonLib, line 772
private static String getDP_TYPE_STRING() { '03' } // [ N byte string ] // library marker kkossev.commonLib, line 773
private static String getDP_TYPE_ENUM() { '04' } // [ 0-255 ] // library marker kkossev.commonLib, line 774
private static String getDP_TYPE_BITMAP() { '05' } // [ 1,2,4 bytes ] as bits // library marker kkossev.commonLib, line 775
private void syncTuyaDateTime() { // library marker kkossev.commonLib, line 777
// The data format for time synchronization, including standard timestamps and local timestamps. Standard timestamp (4 bytes) local timestamp (4 bytes) Time synchronization data format: The standard timestamp is the total number of seconds from 00:00:00 on January 01, 1970 GMT to the present. // library marker kkossev.commonLib, line 778
// For example, local timestamp = standard timestamp + number of seconds between standard time and local time (including time zone and daylight saving time). // Y2K = 946684800 // library marker kkossev.commonLib, line 779
long offset = 0 // library marker kkossev.commonLib, line 780
int offsetHours = 0 // library marker kkossev.commonLib, line 781
Calendar cal = Calendar.getInstance() //it return same time as new Date() // library marker kkossev.commonLib, line 782
int hour = cal.get(Calendar.HOUR_OF_DAY) // library marker kkossev.commonLib, line 783
try { // library marker kkossev.commonLib, line 784
offset = location.getTimeZone().getOffset(new Date().getTime()) // library marker kkossev.commonLib, line 785
offsetHours = (offset / 3600000) as int // library marker kkossev.commonLib, line 786
logDebug "timezone offset of current location is ${offset} (${offsetHours} hours), current hour is ${hour} h" // library marker kkossev.commonLib, line 787
} catch (e) { // library marker kkossev.commonLib, line 788
log.error "${device.displayName} cannot resolve current location. please set location in Hubitat location setting. Setting timezone offset to zero" // library marker kkossev.commonLib, line 789
} // library marker kkossev.commonLib, line 790
// // library marker kkossev.commonLib, line 791
List cmds = zigbee.command(CLUSTER_TUYA, SETTIME, '0008' + zigbee.convertToHexString((int)(now() / 1000), 8) + zigbee.convertToHexString((int)((now() + offset) / 1000), 8)) // library marker kkossev.commonLib, line 792
sendZigbeeCommands(cmds) // library marker kkossev.commonLib, line 793
logDebug "Tuya device time synchronized to ${unix2formattedDate(now())} (${cmds})" // library marker kkossev.commonLib, line 794
} // library marker kkossev.commonLib, line 795
// called from the main parse method when the cluster is 0xEF00 and no custom handler is defined // library marker kkossev.commonLib, line 797
public void standardParseTuyaCluster(final Map descMap) { // library marker kkossev.commonLib, line 798
if (descMap?.clusterInt == CLUSTER_TUYA && descMap?.command == '24') { //getSETTIME // library marker kkossev.commonLib, line 799
syncTuyaDateTime() // library marker kkossev.commonLib, line 800
} // library marker kkossev.commonLib, line 801
else if (descMap?.clusterInt == CLUSTER_TUYA && descMap?.command == '0B') { // ZCL Command Default Response // library marker kkossev.commonLib, line 802
String clusterCmd = descMap?.data[0] // library marker kkossev.commonLib, line 803
String status = descMap?.data[1] // library marker kkossev.commonLib, line 804
logDebug "device has received Tuya cluster ZCL command 0x${clusterCmd} response 0x${status} data = ${descMap?.data}" // library marker kkossev.commonLib, line 805
if (status != '00') { // library marker kkossev.commonLib, line 806
logWarn "ATTENTION! manufacturer = ${device.getDataValue('manufacturer')} unsupported Tuya cluster ZCL command 0x${clusterCmd} response 0x${status} data = ${descMap?.data} !!!" // library marker kkossev.commonLib, line 807
} // library marker kkossev.commonLib, line 808
} // library marker kkossev.commonLib, line 809
else if ((descMap?.clusterInt == CLUSTER_TUYA) && (descMap?.command == '01' || descMap?.command == '02' || descMap?.command == '05' || descMap?.command == '06')) { // library marker kkossev.commonLib, line 810
int dataLen = descMap?.data.size() // library marker kkossev.commonLib, line 811
//log.warn "dataLen=${dataLen}" // library marker kkossev.commonLib, line 812
//def transid = zigbee.convertHexToInt(descMap?.data[1]) // "transid" is just a "counter", a response will have the same transid as the command // library marker kkossev.commonLib, line 813
if (dataLen <= 5) { // library marker kkossev.commonLib, line 814
logWarn "unprocessed short Tuya command response: dp_id=${descMap?.data[3]} dp=${descMap?.data[2]} fncmd_len=${fncmd_len} data=${descMap?.data})" // library marker kkossev.commonLib, line 815
return // library marker kkossev.commonLib, line 816
} // library marker kkossev.commonLib, line 817
boolean isSpammyDeviceProfileDefined = this.respondsTo('isSpammyDeviceProfile') // check if the method exists 05/21/2024 // library marker kkossev.commonLib, line 818
for (int i = 0; i < (dataLen - 4); ) { // library marker kkossev.commonLib, line 819
int dp = zigbee.convertHexToInt(descMap?.data[2 + i]) // "dp" field describes the action/message of a command frame // library marker kkossev.commonLib, line 820
int dp_id = zigbee.convertHexToInt(descMap?.data[3 + i]) // "dp_identifier" is device dependant // library marker kkossev.commonLib, line 821
int fncmd_len = zigbee.convertHexToInt(descMap?.data[5 + i]) // library marker kkossev.commonLib, line 822
int fncmd = getTuyaAttributeValue(descMap?.data, i) // // library marker kkossev.commonLib, line 823
if (!isChattyDeviceReport(descMap) && isSpammyDeviceProfileDefined && !isSpammyDeviceProfile()) { // library marker kkossev.commonLib, line 824
logDebug "standardParseTuyaCluster: command=${descMap?.command} dp_id=${dp_id} dp=${dp} (0x${descMap?.data[2 + i]}) fncmd=${fncmd} fncmd_len=${fncmd_len} (index=${i})" // library marker kkossev.commonLib, line 825
} // library marker kkossev.commonLib, line 826
standardProcessTuyaDP(descMap, dp, dp_id, fncmd) // library marker kkossev.commonLib, line 827
i = i + fncmd_len + 4 // library marker kkossev.commonLib, line 828
} // library marker kkossev.commonLib, line 829
} // library marker kkossev.commonLib, line 830
else { // library marker kkossev.commonLib, line 831
logWarn "standardParseTuyaCluster: unprocessed Tuya cluster command ${descMap?.command} data=${descMap?.data}" // library marker kkossev.commonLib, line 832
} // library marker kkossev.commonLib, line 833
} // library marker kkossev.commonLib, line 834
// called from the standardParseTuyaCluster method for each DP chunk in the messages (usually one, but could be multiple DPs in one message) // library marker kkossev.commonLib, line 836
void standardProcessTuyaDP(final Map descMap, final int dp, final int dp_id, final int fncmd, final int dp_len=0) { // library marker kkossev.commonLib, line 837
logTrace "standardProcessTuyaDP: checking customProcessTuyaDp dp=${dp} dp_id=${dp_id} fncmd=${fncmd} dp_len=${dp_len}" // library marker kkossev.commonLib, line 838
if (this.respondsTo('customProcessTuyaDp')) { // library marker kkossev.commonLib, line 839
logTrace 'standardProcessTuyaDP: customProcessTuyaDp exists, calling it...' // library marker kkossev.commonLib, line 840
if (customProcessTuyaDp(descMap, dp, dp_id, fncmd, dp_len) == true) { // library marker kkossev.commonLib, line 841
return // EF00 DP has been processed in the custom handler - we are done! // library marker kkossev.commonLib, line 842
} // library marker kkossev.commonLib, line 843
} // library marker kkossev.commonLib, line 844
// check if DeviceProfile processing method exists (deviceProfieLib should be included in the main driver) // library marker kkossev.commonLib, line 845
if (this.respondsTo(processTuyaDPfromDeviceProfile)) { // library marker kkossev.commonLib, line 846
if (processTuyaDPfromDeviceProfile(descMap, dp, dp_id, fncmd, dp_len) == true) { // library marker kkossev.commonLib, line 847
return // sucessfuly processed the new way - we are done. (version 3.0) // library marker kkossev.commonLib, line 848
} // library marker kkossev.commonLib, line 849
} // library marker kkossev.commonLib, line 850
logWarn "NOT PROCESSED Tuya cmd: dp=${dp} value=${fncmd} descMap.data = ${descMap?.data}" // library marker kkossev.commonLib, line 851
} // library marker kkossev.commonLib, line 852
public int getTuyaAttributeValue(final List _data, final int index) { // library marker kkossev.commonLib, line 854
int retValue = 0 // library marker kkossev.commonLib, line 855
if (_data.size() >= 6) { // library marker kkossev.commonLib, line 856
int dataLength = zigbee.convertHexToInt(_data[5 + index]) // library marker kkossev.commonLib, line 857
if (dataLength == 0) { return 0 } // library marker kkossev.commonLib, line 858
int power = 1 // library marker kkossev.commonLib, line 859
for (i in dataLength..1) { // library marker kkossev.commonLib, line 860
retValue = retValue + power * zigbee.convertHexToInt(_data[index + i + 5]) // library marker kkossev.commonLib, line 861
power = power * 256 // library marker kkossev.commonLib, line 862
} // library marker kkossev.commonLib, line 863
} // library marker kkossev.commonLib, line 864
return retValue // library marker kkossev.commonLib, line 865
} // library marker kkossev.commonLib, line 866
public List getTuyaCommand(String dp, String dp_type, String fncmd, int tuyaCmdDefault = SETDATA) { return sendTuyaCommand(dp, dp_type, fncmd, tuyaCmdDefault) } // library marker kkossev.commonLib, line 868
public List sendTuyaCommand(String dp, String dp_type, String fncmd, int tuyaCmdDefault = SETDATA) { // library marker kkossev.commonLib, line 870
List cmds = [] // library marker kkossev.commonLib, line 871
int ep = safeToInt(state.destinationEP) // library marker kkossev.commonLib, line 872
if (ep == null || ep == 0) { ep = 1 } // library marker kkossev.commonLib, line 873
int tuyaCmd // library marker kkossev.commonLib, line 874
// added 07/01/2024 - deviceProfilesV3 device key tuyaCmd:04 : owerwrite all sendTuyaCommand calls for a specfic device profile, if specified! // library marker kkossev.commonLib, line 875
if (this.respondsTo('getDEVICE') && DEVICE?.device?.tuyaCmd != null) { // library marker kkossev.commonLib, line 876
tuyaCmd = DEVICE?.device?.tuyaCmd // library marker kkossev.commonLib, line 877
} // library marker kkossev.commonLib, line 878
else { // library marker kkossev.commonLib, line 879
tuyaCmd = tuyaCmdDefault // 0x00 is the default command for most of the Tuya devices, except some .. // library marker kkossev.commonLib, line 880
} // library marker kkossev.commonLib, line 881
cmds = zigbee.command(CLUSTER_TUYA, tuyaCmd, [destEndpoint :ep], delay = 201, PACKET_ID + dp + dp_type + zigbee.convertToHexString((int)(fncmd.length() / 2), 4) + fncmd ) // library marker kkossev.commonLib, line 882
logDebug "${device.displayName} getTuyaCommand (dp=$dp fncmd=$fncmd dp_type=$dp_type) = ${cmds}" // library marker kkossev.commonLib, line 883
return cmds // library marker kkossev.commonLib, line 884
} // library marker kkossev.commonLib, line 885
private String getPACKET_ID() { return zigbee.convertToHexString(new Random().nextInt(65536), 4) } // library marker kkossev.commonLib, line 887
public void tuyaTest(String dpCommand, String dpValue, String dpTypeString ) { // library marker kkossev.commonLib, line 889
String dpType = dpTypeString == 'DP_TYPE_VALUE' ? DP_TYPE_VALUE : dpTypeString == 'DP_TYPE_BOOL' ? DP_TYPE_BOOL : dpTypeString == 'DP_TYPE_ENUM' ? DP_TYPE_ENUM : null // library marker kkossev.commonLib, line 890
String dpValHex = dpTypeString == 'DP_TYPE_VALUE' ? zigbee.convertToHexString(dpValue as int, 8) : dpValue // library marker kkossev.commonLib, line 891
if (settings?.logEnable) { log.warn "${device.displayName} sending TEST command=${dpCommand} value=${dpValue} ($dpValHex) type=${dpType}" } // library marker kkossev.commonLib, line 892
sendZigbeeCommands( sendTuyaCommand(dpCommand, dpType, dpValHex) ) // library marker kkossev.commonLib, line 893
} // library marker kkossev.commonLib, line 894
public List tuyaBlackMagic() { // library marker kkossev.commonLib, line 897
int ep = safeToInt(state.destinationEP ?: 01) // library marker kkossev.commonLib, line 898
if (ep == null || ep == 0) { ep = 1 } // library marker kkossev.commonLib, line 899
logInfo 'tuyaBlackMagic()...' // library marker kkossev.commonLib, line 900
return zigbee.readAttribute(0x0000, [0x0004, 0x000, 0x0001, 0x0005, 0x0007, 0xfffe], [destEndpoint :ep], delay = 200) // library marker kkossev.commonLib, line 901
} // library marker kkossev.commonLib, line 902
public List queryAllTuyaDP() { // library marker kkossev.commonLib, line 904
logTrace 'queryAllTuyaDP()' // library marker kkossev.commonLib, line 905
List cmds = zigbee.command(0xEF00, 0x03) // library marker kkossev.commonLib, line 906
return cmds // library marker kkossev.commonLib, line 907
} // library marker kkossev.commonLib, line 908
public void aqaraBlackMagic() { // library marker kkossev.commonLib, line 910
List cmds = [] // library marker kkossev.commonLib, line 911
if (this.respondsTo('customAqaraBlackMagic')) { // library marker kkossev.commonLib, line 912
cmds = customAqaraBlackMagic() // library marker kkossev.commonLib, line 913
} // library marker kkossev.commonLib, line 914
if (cmds != null && !cmds.isEmpty()) { // library marker kkossev.commonLib, line 915
logDebug 'sending aqaraBlackMagic()' // library marker kkossev.commonLib, line 916
sendZigbeeCommands(cmds) // library marker kkossev.commonLib, line 917
return // library marker kkossev.commonLib, line 918
} // library marker kkossev.commonLib, line 919
logDebug 'aqaraBlackMagic() was SKIPPED' // library marker kkossev.commonLib, line 920
} // library marker kkossev.commonLib, line 921
// Invoked from configure() // library marker kkossev.commonLib, line 923
public List initializeDevice() { // library marker kkossev.commonLib, line 924
List cmds = [] // library marker kkossev.commonLib, line 925
logInfo 'initializeDevice...' // library marker kkossev.commonLib, line 926
if (this.respondsTo('customInitializeDevice')) { // library marker kkossev.commonLib, line 927
List customCmds = customInitializeDevice() // library marker kkossev.commonLib, line 928
if (customCmds != null && !customCmds.isEmpty()) { cmds += customCmds } // library marker kkossev.commonLib, line 929
} // library marker kkossev.commonLib, line 930
else { logDebug 'no customInitializeDevice method defined' } // library marker kkossev.commonLib, line 931
logDebug "initializeDevice(): cmds=${cmds}" // library marker kkossev.commonLib, line 932
return cmds // library marker kkossev.commonLib, line 933
} // library marker kkossev.commonLib, line 934
// Invoked from configure() // library marker kkossev.commonLib, line 936
public List configureDevice() { // library marker kkossev.commonLib, line 937
List cmds = [] // library marker kkossev.commonLib, line 938
logInfo 'configureDevice...' // library marker kkossev.commonLib, line 939
if (this.respondsTo('customConfigureDevice')) { // library marker kkossev.commonLib, line 940
List customCmds = customConfigureDevice() // library marker kkossev.commonLib, line 941
if (customCmds != null && !customCmds.isEmpty()) { cmds += customCmds } // library marker kkossev.commonLib, line 942
} // library marker kkossev.commonLib, line 943
else { logDebug 'no customConfigureDevice method defined' } // library marker kkossev.commonLib, line 944
// sendZigbeeCommands(cmds) changed 03/04/2024 // library marker kkossev.commonLib, line 945
logDebug "configureDevice(): cmds=${cmds}" // library marker kkossev.commonLib, line 946
return cmds // library marker kkossev.commonLib, line 947
} // library marker kkossev.commonLib, line 948
/* // library marker kkossev.commonLib, line 950
* ----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 951
* Hubitat default handlers methods // library marker kkossev.commonLib, line 952
* ----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 953
*/ // library marker kkossev.commonLib, line 954
List customHandlers(final List customHandlersList) { // library marker kkossev.commonLib, line 956
List cmds = [] // library marker kkossev.commonLib, line 957
if (customHandlersList != null && !customHandlersList.isEmpty()) { // library marker kkossev.commonLib, line 958
customHandlersList.each { handler -> // library marker kkossev.commonLib, line 959
if (this.respondsTo(handler)) { // library marker kkossev.commonLib, line 960
List customCmds = this."${handler}"() // library marker kkossev.commonLib, line 961
if (customCmds != null && !customCmds.isEmpty()) { cmds += customCmds } // library marker kkossev.commonLib, line 962
} // library marker kkossev.commonLib, line 963
} // library marker kkossev.commonLib, line 964
} // library marker kkossev.commonLib, line 965
return cmds // library marker kkossev.commonLib, line 966
} // library marker kkossev.commonLib, line 967
public void refresh() { // library marker kkossev.commonLib, line 969
logDebug "refresh()... DEVICE_TYPE is ${DEVICE_TYPE} model=${device.getDataValue('model')} manufacturer=${device.getDataValue('manufacturer')}" // library marker kkossev.commonLib, line 970
checkDriverVersion(state) // library marker kkossev.commonLib, line 971
List cmds = [], customCmds = [] // library marker kkossev.commonLib, line 972
if (this.respondsTo('customRefresh')) { // if there is a customRefresh() method defined in the main driver, call it // library marker kkossev.commonLib, line 973
customCmds = customRefresh() // library marker kkossev.commonLib, line 974
if (customCmds != null && !customCmds.isEmpty()) { cmds += customCmds } else { logDebug 'no customRefresh method defined' } // library marker kkossev.commonLib, line 975
} // library marker kkossev.commonLib, line 976
else { // call all known libraryRefresh methods // library marker kkossev.commonLib, line 977
customCmds = customHandlers(['onOffRefresh', 'groupsRefresh', 'batteryRefresh', 'levelRefresh', 'temperatureRefresh', 'humidityRefresh', 'illuminanceRefresh']) // library marker kkossev.commonLib, line 978
if (customCmds != null && !customCmds.isEmpty()) { cmds += customCmds } else { logDebug 'no libraries refresh() defined' } // library marker kkossev.commonLib, line 979
} // library marker kkossev.commonLib, line 980
if (cmds != null && !cmds.isEmpty()) { // library marker kkossev.commonLib, line 981
logDebug "refresh() cmds=${cmds}" // library marker kkossev.commonLib, line 982
setRefreshRequest() // 3 seconds // library marker kkossev.commonLib, line 983
sendZigbeeCommands(cmds) // library marker kkossev.commonLib, line 984
} // library marker kkossev.commonLib, line 985
else { // library marker kkossev.commonLib, line 986
logDebug "no refresh() commands defined for device type ${DEVICE_TYPE}" // library marker kkossev.commonLib, line 987
} // library marker kkossev.commonLib, line 988
} // library marker kkossev.commonLib, line 989
public void setRefreshRequest() { if (state.states == null) { state.states = [:] } ; state.states['isRefresh'] = true; runInMillis(REFRESH_TIMER, 'clearRefreshRequest', [overwrite: true]) } // library marker kkossev.commonLib, line 991
public void clearRefreshRequest() { if (state.states == null) { state.states = [:] } ; state.states['isRefresh'] = false } // library marker kkossev.commonLib, line 992
public void clearInfoEvent() { sendInfoEvent('clear') } // library marker kkossev.commonLib, line 993
public void sendInfoEvent(String info=null) { // library marker kkossev.commonLib, line 995
if (info == null || info == 'clear') { // library marker kkossev.commonLib, line 996
logDebug 'clearing the Status event' // library marker kkossev.commonLib, line 997
sendEvent(name: 'Status', value: 'clear', type: 'digital') // library marker kkossev.commonLib, line 998
} // library marker kkossev.commonLib, line 999
else { // library marker kkossev.commonLib, line 1000
logInfo "${info}" // library marker kkossev.commonLib, line 1001
sendEvent(name: 'Status', value: info, type: 'digital') // library marker kkossev.commonLib, line 1002
runIn(INFO_AUTO_CLEAR_PERIOD, 'clearInfoEvent') // automatically clear the Info attribute after 1 minute // library marker kkossev.commonLib, line 1003
} // library marker kkossev.commonLib, line 1004
} // library marker kkossev.commonLib, line 1005
public void ping() { // library marker kkossev.commonLib, line 1007
if (state.lastTx == null ) { state.lastTx = [:] } ; state.lastTx['pingTime'] = new Date().getTime() // library marker kkossev.commonLib, line 1008
if (state.states == null ) { state.states = [:] } ; state.states['isPing'] = true // library marker kkossev.commonLib, line 1009
scheduleCommandTimeoutCheck() // library marker kkossev.commonLib, line 1010
int pingAttr = (device.getDataValue('manufacturer') == 'SONOFF') ? 0x05 : PING_ATTR_ID // library marker kkossev.commonLib, line 1011
if (isVirtual()) { runInMillis(10, 'virtualPong') } // library marker kkossev.commonLib, line 1012
else { sendZigbeeCommands(zigbee.readAttribute(zigbee.BASIC_CLUSTER, pingAttr, [:], 0) ) } // library marker kkossev.commonLib, line 1013
logDebug 'ping...' // library marker kkossev.commonLib, line 1014
} // library marker kkossev.commonLib, line 1015
private void virtualPong() { // library marker kkossev.commonLib, line 1017
logDebug 'virtualPing: pong!' // library marker kkossev.commonLib, line 1018
Long now = new Date().getTime() // library marker kkossev.commonLib, line 1019
int timeRunning = now.toInteger() - (state.lastTx['pingTime'] ?: '0').toInteger() // library marker kkossev.commonLib, line 1020
if (timeRunning > 0 && timeRunning < MAX_PING_MILISECONDS) { // library marker kkossev.commonLib, line 1021
state.stats['pingsOK'] = (state.stats['pingsOK'] ?: 0) + 1 // library marker kkossev.commonLib, line 1022
if (timeRunning < safeToInt((state.stats['pingsMin'] ?: '9999'))) { state.stats['pingsMin'] = timeRunning } // library marker kkossev.commonLib, line 1023
if (timeRunning > safeToInt((state.stats['pingsMax'] ?: '0'))) { state.stats['pingsMax'] = timeRunning } // library marker kkossev.commonLib, line 1024
state.stats['pingsAvg'] = approxRollingAverage(safeToDouble(state.stats['pingsAvg']), safeToDouble(timeRunning)) as int // library marker kkossev.commonLib, line 1025
sendRttEvent() // library marker kkossev.commonLib, line 1026
} // library marker kkossev.commonLib, line 1027
else { // library marker kkossev.commonLib, line 1028
logWarn "unexpected ping timeRunning=${timeRunning} " // library marker kkossev.commonLib, line 1029
} // library marker kkossev.commonLib, line 1030
state.states['isPing'] = false // library marker kkossev.commonLib, line 1031
unscheduleCommandTimeoutCheck(state) // library marker kkossev.commonLib, line 1032
} // library marker kkossev.commonLib, line 1033
public void sendRttEvent( String value=null) { // library marker kkossev.commonLib, line 1035
Long now = new Date().getTime() // library marker kkossev.commonLib, line 1036
if (state.lastTx == null ) { state.lastTx = [:] } // library marker kkossev.commonLib, line 1037
int timeRunning = now.toInteger() - (state.lastTx['pingTime'] ?: now).toInteger() // library marker kkossev.commonLib, line 1038
String descriptionText = "Round-trip time is ${timeRunning} ms (min=${state.stats['pingsMin']} max=${state.stats['pingsMax']} average=${state.stats['pingsAvg']})" // library marker kkossev.commonLib, line 1039
if (value == null) { // library marker kkossev.commonLib, line 1040
logInfo "${descriptionText}" // library marker kkossev.commonLib, line 1041
sendEvent(name: 'rtt', value: timeRunning, descriptionText: descriptionText, unit: 'ms', type: 'physical') // library marker kkossev.commonLib, line 1042
} // library marker kkossev.commonLib, line 1043
else { // library marker kkossev.commonLib, line 1044
descriptionText = "Round-trip time : ${value}" // library marker kkossev.commonLib, line 1045
logInfo "${descriptionText}" // library marker kkossev.commonLib, line 1046
sendEvent(name: 'rtt', value: value, descriptionText: descriptionText, type: 'physical') // library marker kkossev.commonLib, line 1047
} // library marker kkossev.commonLib, line 1048
} // library marker kkossev.commonLib, line 1049
private String clusterLookup(final Object cluster) { // library marker kkossev.commonLib, line 1051
if (cluster != null) { // library marker kkossev.commonLib, line 1052
return zigbee.clusterLookup(cluster.toInteger()) ?: "private cluster 0x${intToHexStr(cluster.toInteger())}" // library marker kkossev.commonLib, line 1053
} // library marker kkossev.commonLib, line 1054
logWarn 'cluster is NULL!' // library marker kkossev.commonLib, line 1055
return 'NULL' // library marker kkossev.commonLib, line 1056
} // library marker kkossev.commonLib, line 1057
private void scheduleCommandTimeoutCheck(int delay = COMMAND_TIMEOUT) { // library marker kkossev.commonLib, line 1059
if (state.states == null) { state.states = [:] } // library marker kkossev.commonLib, line 1060
state.states['isTimeoutCheck'] = true // library marker kkossev.commonLib, line 1061
runIn(delay, 'deviceCommandTimeout') // library marker kkossev.commonLib, line 1062
} // library marker kkossev.commonLib, line 1063
// unschedule() is a very time consuming operation : ~ 5 milliseconds per call ! // library marker kkossev.commonLib, line 1065
void unscheduleCommandTimeoutCheck(final Map state) { // can not be static :( // library marker kkossev.commonLib, line 1066
if (state.states == null) { state.states = [:] } // library marker kkossev.commonLib, line 1067
if (state.states['isTimeoutCheck'] == true) { // library marker kkossev.commonLib, line 1068
state.states['isTimeoutCheck'] = false // library marker kkossev.commonLib, line 1069
unschedule('deviceCommandTimeout') // library marker kkossev.commonLib, line 1070
} // library marker kkossev.commonLib, line 1071
} // library marker kkossev.commonLib, line 1072
void deviceCommandTimeout() { // library marker kkossev.commonLib, line 1074
logWarn 'no response received (sleepy device or offline?)' // library marker kkossev.commonLib, line 1075
sendRttEvent('timeout') // library marker kkossev.commonLib, line 1076
state.stats['pingsFail'] = (state.stats['pingsFail'] ?: 0) + 1 // library marker kkossev.commonLib, line 1077
if (state.health?.isHealthCheck == true) { // library marker kkossev.commonLib, line 1078
logWarn 'device health check failed!' // library marker kkossev.commonLib, line 1079
state.health?.checkCtr3 = (state.health?.checkCtr3 ?: 0 ) + 1 // library marker kkossev.commonLib, line 1080
if (state.health?.checkCtr3 >= PRESENCE_COUNT_THRESHOLD) { // library marker kkossev.commonLib, line 1081
if ((device.currentValue('healthStatus') ?: 'unknown') != 'offline' ) { // library marker kkossev.commonLib, line 1082
sendHealthStatusEvent('offline') // library marker kkossev.commonLib, line 1083
} // library marker kkossev.commonLib, line 1084
} // library marker kkossev.commonLib, line 1085
state.health['isHealthCheck'] = false // library marker kkossev.commonLib, line 1086
} // library marker kkossev.commonLib, line 1087
} // library marker kkossev.commonLib, line 1088
private void scheduleDeviceHealthCheck(final int intervalMins, final int healthMethod) { // library marker kkossev.commonLib, line 1090
if (healthMethod == 1 || healthMethod == 2) { // library marker kkossev.commonLib, line 1091
String cron = getCron( intervalMins * 60 ) // library marker kkossev.commonLib, line 1092
schedule(cron, 'deviceHealthCheck') // library marker kkossev.commonLib, line 1093
logDebug "deviceHealthCheck is scheduled every ${intervalMins} minutes" // library marker kkossev.commonLib, line 1094
} // library marker kkossev.commonLib, line 1095
else { // library marker kkossev.commonLib, line 1096
logWarn 'deviceHealthCheck is not scheduled!' // library marker kkossev.commonLib, line 1097
unschedule('deviceHealthCheck') // library marker kkossev.commonLib, line 1098
} // library marker kkossev.commonLib, line 1099
} // library marker kkossev.commonLib, line 1100
private void unScheduleDeviceHealthCheck() { // library marker kkossev.commonLib, line 1102
unschedule('deviceHealthCheck') // library marker kkossev.commonLib, line 1103
device.deleteCurrentState('healthStatus') // library marker kkossev.commonLib, line 1104
logWarn 'device health check is disabled!' // library marker kkossev.commonLib, line 1105
} // library marker kkossev.commonLib, line 1106
// called when any event was received from the Zigbee device in the parse() method. // library marker kkossev.commonLib, line 1108
private void setHealthStatusOnline(Map state) { // library marker kkossev.commonLib, line 1109
if (state.health == null) { state.health = [:] } // library marker kkossev.commonLib, line 1110
state.health['checkCtr3'] = 0 // library marker kkossev.commonLib, line 1111
if (!((device.currentValue('healthStatus') ?: 'unknown') in ['online'])) { // library marker kkossev.commonLib, line 1112
sendHealthStatusEvent('online') // library marker kkossev.commonLib, line 1113
logInfo 'is now online!' // library marker kkossev.commonLib, line 1114
} // library marker kkossev.commonLib, line 1115
} // library marker kkossev.commonLib, line 1116
private void deviceHealthCheck() { // library marker kkossev.commonLib, line 1118
checkDriverVersion(state) // library marker kkossev.commonLib, line 1119
if (state.health == null) { state.health = [:] } // library marker kkossev.commonLib, line 1120
int ctr = state.health['checkCtr3'] ?: 0 // library marker kkossev.commonLib, line 1121
if (ctr >= PRESENCE_COUNT_THRESHOLD) { // library marker kkossev.commonLib, line 1122
if ((device.currentValue('healthStatus') ?: 'unknown') != 'offline' ) { // library marker kkossev.commonLib, line 1123
logWarn 'not present!' // library marker kkossev.commonLib, line 1124
sendHealthStatusEvent('offline') // library marker kkossev.commonLib, line 1125
} // library marker kkossev.commonLib, line 1126
} // library marker kkossev.commonLib, line 1127
else { // library marker kkossev.commonLib, line 1128
logDebug "deviceHealthCheck - online (notPresentCounter=${(ctr + 1)})" // library marker kkossev.commonLib, line 1129
} // library marker kkossev.commonLib, line 1130
state.health['checkCtr3'] = ctr + 1 // library marker kkossev.commonLib, line 1131
// added 03/06/2025 // library marker kkossev.commonLib, line 1132
if (settings?.healthCheckMethod as int == 2) { // library marker kkossev.commonLib, line 1133
state.health['isHealthCheck'] = true // library marker kkossev.commonLib, line 1134
ping() // proactively ping the device... // library marker kkossev.commonLib, line 1135
} // library marker kkossev.commonLib, line 1136
} // library marker kkossev.commonLib, line 1137
private void sendHealthStatusEvent(final String value) { // library marker kkossev.commonLib, line 1139
String descriptionText = "healthStatus changed to ${value}" // library marker kkossev.commonLib, line 1140
sendEvent(name: 'healthStatus', value: value, descriptionText: descriptionText, isStateChange: true, type: 'digital') // library marker kkossev.commonLib, line 1141
if (value == 'online') { // library marker kkossev.commonLib, line 1142
logInfo "${descriptionText}" // library marker kkossev.commonLib, line 1143
} // library marker kkossev.commonLib, line 1144
else { // library marker kkossev.commonLib, line 1145
if (settings?.txtEnable) { log.warn "${device.displayName}} ${descriptionText}" } // library marker kkossev.commonLib, line 1146
} // library marker kkossev.commonLib, line 1147
} // library marker kkossev.commonLib, line 1148
// Invoked by Hubitat when the driver configuration is updated // library marker kkossev.commonLib, line 1150
void updated() { // library marker kkossev.commonLib, line 1151
logInfo 'updated()...' // library marker kkossev.commonLib, line 1152
checkDriverVersion(state) // library marker kkossev.commonLib, line 1153
logInfo"driver version ${driverVersionAndTimeStamp()}" // library marker kkossev.commonLib, line 1154
unschedule() // library marker kkossev.commonLib, line 1155
if (settings.logEnable) { // library marker kkossev.commonLib, line 1157
logTrace(settings.toString()) // library marker kkossev.commonLib, line 1158
runIn(86400, 'logsOff') // library marker kkossev.commonLib, line 1159
} // library marker kkossev.commonLib, line 1160
if (settings.traceEnable) { // library marker kkossev.commonLib, line 1161
logTrace(settings.toString()) // library marker kkossev.commonLib, line 1162
runIn(1800, 'traceOff') // library marker kkossev.commonLib, line 1163
} // library marker kkossev.commonLib, line 1164
final int healthMethod = (settings.healthCheckMethod as Integer) ?: 0 // library marker kkossev.commonLib, line 1166
if (healthMethod == 1 || healthMethod == 2) { // [0: 'Disabled', 1: 'Activity check', 2: 'Periodic polling'] // library marker kkossev.commonLib, line 1167
// schedule the periodic timer // library marker kkossev.commonLib, line 1168
final int interval = (settings.healthCheckInterval as Integer) ?: 0 // library marker kkossev.commonLib, line 1169
if (interval > 0) { // library marker kkossev.commonLib, line 1170
//log.trace "healthMethod=${healthMethod} interval=${interval}" // library marker kkossev.commonLib, line 1171
log.info "scheduling health check every ${interval} minutes by ${HealthcheckMethodOpts.options[healthCheckMethod as int]} method" // library marker kkossev.commonLib, line 1172
scheduleDeviceHealthCheck(interval, healthMethod) // library marker kkossev.commonLib, line 1173
} // library marker kkossev.commonLib, line 1174
} // library marker kkossev.commonLib, line 1175
else { // library marker kkossev.commonLib, line 1176
unScheduleDeviceHealthCheck() // unschedule the periodic job, depending on the healthMethod // library marker kkossev.commonLib, line 1177
log.info 'Health Check is disabled!' // library marker kkossev.commonLib, line 1178
} // library marker kkossev.commonLib, line 1179
if (this.respondsTo('customUpdated')) { // library marker kkossev.commonLib, line 1180
customUpdated() // library marker kkossev.commonLib, line 1181
} // library marker kkossev.commonLib, line 1182
sendInfoEvent('updated') // library marker kkossev.commonLib, line 1184
} // library marker kkossev.commonLib, line 1185
private void logsOff() { // library marker kkossev.commonLib, line 1187
logInfo 'debug logging disabled...' // library marker kkossev.commonLib, line 1188
device.updateSetting('logEnable', [value: 'false', type: 'bool']) // library marker kkossev.commonLib, line 1189
} // library marker kkossev.commonLib, line 1190
private void traceOff() { // library marker kkossev.commonLib, line 1191
logInfo 'trace logging disabled...' // library marker kkossev.commonLib, line 1192
device.updateSetting('traceEnable', [value: 'false', type: 'bool']) // library marker kkossev.commonLib, line 1193
} // library marker kkossev.commonLib, line 1194
public void configure(String command) { // library marker kkossev.commonLib, line 1196
logInfo "configure(${command})..." // library marker kkossev.commonLib, line 1197
if (!(command in (ConfigureOpts.keySet() as List))) { // library marker kkossev.commonLib, line 1198
logWarn "configure: command ${command} must be one of these : ${ConfigureOpts.keySet() as List}" // library marker kkossev.commonLib, line 1199
return // library marker kkossev.commonLib, line 1200
} // library marker kkossev.commonLib, line 1201
// // library marker kkossev.commonLib, line 1202
String func // library marker kkossev.commonLib, line 1203
try { // library marker kkossev.commonLib, line 1204
func = ConfigureOpts[command]?.function // library marker kkossev.commonLib, line 1205
"$func"() // library marker kkossev.commonLib, line 1206
} // library marker kkossev.commonLib, line 1207
catch (e) { // library marker kkossev.commonLib, line 1208
logWarn "Exception ${e} caught while processing $func($value)" // library marker kkossev.commonLib, line 1209
return // library marker kkossev.commonLib, line 1210
} // library marker kkossev.commonLib, line 1211
logInfo "executed '${func}'" // library marker kkossev.commonLib, line 1212
} // library marker kkossev.commonLib, line 1213
/* groovylint-disable-next-line UnusedMethodParameter */ // library marker kkossev.commonLib, line 1215
void configureHelp(final String val) { // library marker kkossev.commonLib, line 1216
if (settings?.txtEnable) { log.warn "${device.displayName} configureHelp: select one of the commands in this list!" } // library marker kkossev.commonLib, line 1217
} // library marker kkossev.commonLib, line 1218
public void loadAllDefaults() { // library marker kkossev.commonLib, line 1220
logDebug 'loadAllDefaults() !!!' // library marker kkossev.commonLib, line 1221
deleteAllSettings() // library marker kkossev.commonLib, line 1222
deleteAllCurrentStates() // library marker kkossev.commonLib, line 1223
deleteAllScheduledJobs() // library marker kkossev.commonLib, line 1224
deleteAllStates() // library marker kkossev.commonLib, line 1225
deleteAllChildDevices() // library marker kkossev.commonLib, line 1226
initialize() // library marker kkossev.commonLib, line 1228
configureNow() // calls also configureDevice() // bug fixed 04/03/2024 // library marker kkossev.commonLib, line 1229
updated() // library marker kkossev.commonLib, line 1230
sendInfoEvent('All Defaults Loaded! F5 to refresh') // library marker kkossev.commonLib, line 1231
} // library marker kkossev.commonLib, line 1232
private void configureNow() { // library marker kkossev.commonLib, line 1234
configure() // library marker kkossev.commonLib, line 1235
} // library marker kkossev.commonLib, line 1236
/** // library marker kkossev.commonLib, line 1238
* Send configuration parameters to the device // library marker kkossev.commonLib, line 1239
* Invoked when device is first installed and when the user updates the configuration TODO // library marker kkossev.commonLib, line 1240
* @return sends zigbee commands // library marker kkossev.commonLib, line 1241
*/ // library marker kkossev.commonLib, line 1242
void configure() { // library marker kkossev.commonLib, line 1243
List cmds = [] // library marker kkossev.commonLib, line 1244
if (state.stats == null) { state.stats = [:] } ; state.stats.cfgCtr = (state.stats.cfgCtr ?: 0) + 1 // library marker kkossev.commonLib, line 1245
logInfo "configure()... cfgCtr=${state.stats.cfgCtr}" // library marker kkossev.commonLib, line 1246
logDebug "configure(): settings: $settings" // library marker kkossev.commonLib, line 1247
if (isTuya()) { // library marker kkossev.commonLib, line 1248
cmds += tuyaBlackMagic() // library marker kkossev.commonLib, line 1249
} // library marker kkossev.commonLib, line 1250
aqaraBlackMagic() // zigbee commands are sent here! // library marker kkossev.commonLib, line 1251
List initCmds = initializeDevice() // library marker kkossev.commonLib, line 1252
if (initCmds != null && !initCmds.isEmpty()) { cmds += initCmds } // library marker kkossev.commonLib, line 1253
List cfgCmds = configureDevice() // library marker kkossev.commonLib, line 1254
if (cfgCmds != null && !cfgCmds.isEmpty()) { cmds += cfgCmds } // library marker kkossev.commonLib, line 1255
if (cmds != null && !cmds.isEmpty()) { // library marker kkossev.commonLib, line 1256
sendZigbeeCommands(cmds) // library marker kkossev.commonLib, line 1257
logDebug "configure(): sent cmds = ${cmds}" // library marker kkossev.commonLib, line 1258
sendInfoEvent('sent device configuration') // library marker kkossev.commonLib, line 1259
} // library marker kkossev.commonLib, line 1260
else { // library marker kkossev.commonLib, line 1261
logDebug "configure(): no commands defined for device type ${DEVICE_TYPE}" // library marker kkossev.commonLib, line 1262
} // library marker kkossev.commonLib, line 1263
} // library marker kkossev.commonLib, line 1264
// Invoked when the device is installed with this driver automatically selected. // library marker kkossev.commonLib, line 1266
void installed() { // library marker kkossev.commonLib, line 1267
if (state.stats == null) { state.stats = [:] } ; state.stats.instCtr = (state.stats.instCtr ?: 0) + 1 // library marker kkossev.commonLib, line 1268
logInfo "installed()... instCtr=${state.stats.instCtr}" // library marker kkossev.commonLib, line 1269
// populate some default values for attributes // library marker kkossev.commonLib, line 1270
sendEvent(name: 'healthStatus', value: 'unknown', descriptionText: 'device was installed', type: 'digital') // library marker kkossev.commonLib, line 1271
sendEvent(name: 'powerSource', value: 'unknown', descriptionText: 'device was installed', type: 'digital') // library marker kkossev.commonLib, line 1272
sendInfoEvent('installed') // library marker kkossev.commonLib, line 1273
runIn(3, 'updated') // library marker kkossev.commonLib, line 1274
runIn(5, 'queryPowerSource') // library marker kkossev.commonLib, line 1275
} // library marker kkossev.commonLib, line 1276
private void queryPowerSource() { // library marker kkossev.commonLib, line 1278
sendZigbeeCommands(zigbee.readAttribute(zigbee.BASIC_CLUSTER, 0x0007, [:], 0)) // library marker kkossev.commonLib, line 1279
} // library marker kkossev.commonLib, line 1280
// Invoked from 'LoadAllDefaults' // library marker kkossev.commonLib, line 1282
private void initialize() { // library marker kkossev.commonLib, line 1283
if (state.stats == null) { state.stats = [:] } ; state.stats.initCtr = (state.stats.initCtr ?: 0) + 1 // library marker kkossev.commonLib, line 1284
logInfo "initialize()... initCtr=${state.stats.initCtr}" // library marker kkossev.commonLib, line 1285
if (device.getDataValue('powerSource') == null) { // library marker kkossev.commonLib, line 1286
logInfo "initializing device powerSource 'unknown'" // library marker kkossev.commonLib, line 1287
sendEvent(name: 'powerSource', value: 'unknown', type: 'digital') // library marker kkossev.commonLib, line 1288
} // library marker kkossev.commonLib, line 1289
initializeVars(fullInit = true) // library marker kkossev.commonLib, line 1290
updateTuyaVersion() // library marker kkossev.commonLib, line 1291
updateAqaraVersion() // library marker kkossev.commonLib, line 1292
} // library marker kkossev.commonLib, line 1293
/* // library marker kkossev.commonLib, line 1295
*----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 1296
* kkossev drivers commonly used functions // library marker kkossev.commonLib, line 1297
*----------------------------------------------------------------------------- // library marker kkossev.commonLib, line 1298
*/ // library marker kkossev.commonLib, line 1299
static Integer safeToInt(Object val, Integer defaultVal=0) { // library marker kkossev.commonLib, line 1301
return "${val}"?.isInteger() ? "${val}".toInteger() : defaultVal // library marker kkossev.commonLib, line 1302
} // library marker kkossev.commonLib, line 1303
static Double safeToDouble(Object val, Double defaultVal=0.0) { // library marker kkossev.commonLib, line 1305
return "${val}"?.isDouble() ? "${val}".toDouble() : defaultVal // library marker kkossev.commonLib, line 1306
} // library marker kkossev.commonLib, line 1307
static BigDecimal safeToBigDecimal(Object val, BigDecimal defaultVal=0.0) { // library marker kkossev.commonLib, line 1309
return "${val}"?.isBigDecimal() ? "${val}".toBigDecimal() : defaultVal // library marker kkossev.commonLib, line 1310
} // library marker kkossev.commonLib, line 1311
public void sendZigbeeCommands(List cmd) { // library marker kkossev.commonLib, line 1313
if (cmd == null || cmd.isEmpty()) { // library marker kkossev.commonLib, line 1314
logWarn "sendZigbeeCommands: list is empty! cmd=${cmd}" // library marker kkossev.commonLib, line 1315
return // library marker kkossev.commonLib, line 1316
} // library marker kkossev.commonLib, line 1317
hubitat.device.HubMultiAction allActions = new hubitat.device.HubMultiAction() // library marker kkossev.commonLib, line 1318
cmd.each { // library marker kkossev.commonLib, line 1319
if (it == null || it.isEmpty() || it == 'null') { // library marker kkossev.commonLib, line 1320
logWarn "sendZigbeeCommands it: no commands to send! it=${it} (cmd=${cmd})" // library marker kkossev.commonLib, line 1321
return // library marker kkossev.commonLib, line 1322
} // library marker kkossev.commonLib, line 1323
allActions.add(new hubitat.device.HubAction(it, hubitat.device.Protocol.ZIGBEE)) // library marker kkossev.commonLib, line 1324
if (state.stats != null) { state.stats['txCtr'] = (state.stats['txCtr'] ?: 0) + 1 } else { state.stats = [:] } // library marker kkossev.commonLib, line 1325
} // library marker kkossev.commonLib, line 1326
if (state.lastTx != null) { state.lastTx['cmdTime'] = now() } else { state.lastTx = [:] } // library marker kkossev.commonLib, line 1327
sendHubCommand(allActions) // library marker kkossev.commonLib, line 1328
logDebug "sendZigbeeCommands: sent cmd=${cmd}" // library marker kkossev.commonLib, line 1329
} // library marker kkossev.commonLib, line 1330
private String driverVersionAndTimeStamp() { version() + ' ' + timeStamp() + ((_DEBUG) ? ' (debug version!) ' : ' ') + "(${device.getDataValue('model')} ${device.getDataValue('manufacturer')}) (${getModel()} ${location.hub.firmwareVersionString})" } // library marker kkossev.commonLib, line 1332
private String getDeviceInfo() { // library marker kkossev.commonLib, line 1334
return "model=${device.getDataValue('model')} manufacturer=${device.getDataValue('manufacturer')} destinationEP=${state.destinationEP ?: UNKNOWN} deviceProfile=${state.deviceProfile ?: UNKNOWN}" // library marker kkossev.commonLib, line 1335
} // library marker kkossev.commonLib, line 1336
public String getDestinationEP() { // [destEndpoint:safeToInt(getDestinationEP())] // library marker kkossev.commonLib, line 1338
return state.destinationEP ?: device.endpointId ?: '01' // library marker kkossev.commonLib, line 1339
} // library marker kkossev.commonLib, line 1340
//@CompileStatic // library marker kkossev.commonLib, line 1342
public void checkDriverVersion(final Map stateCopy) { // library marker kkossev.commonLib, line 1343
if (stateCopy.driverVersion == null || driverVersionAndTimeStamp() != stateCopy.driverVersion) { // library marker kkossev.commonLib, line 1344
logDebug "checkDriverVersion: updating the settings from the current driver version ${stateCopy.driverVersion} to the new version ${driverVersionAndTimeStamp()}" // library marker kkossev.commonLib, line 1345
sendInfoEvent("Updated to version ${driverVersionAndTimeStamp()}") // library marker kkossev.commonLib, line 1346
state.driverVersion = driverVersionAndTimeStamp() // library marker kkossev.commonLib, line 1347
initializeVars(false) // library marker kkossev.commonLib, line 1348
updateTuyaVersion() // library marker kkossev.commonLib, line 1349
updateAqaraVersion() // library marker kkossev.commonLib, line 1350
} // library marker kkossev.commonLib, line 1351
if (state.states == null) { state.states = [:] } ; if (state.lastRx == null) { state.lastRx = [:] } ; if (state.lastTx == null) { state.lastTx = [:] } ; if (state.stats == null) { state.stats = [:] } // library marker kkossev.commonLib, line 1352
} // library marker kkossev.commonLib, line 1353
// credits @thebearmay // library marker kkossev.commonLib, line 1355
String getModel() { // library marker kkossev.commonLib, line 1356
try { // library marker kkossev.commonLib, line 1357
/* groovylint-disable-next-line UnnecessaryGetter, UnusedVariable */ // library marker kkossev.commonLib, line 1358
String model = getHubVersion() // requires >=2.2.8.141 // library marker kkossev.commonLib, line 1359
} catch (ignore) { // library marker kkossev.commonLib, line 1360
try { // library marker kkossev.commonLib, line 1361
httpGet("http://${location.hub.localIP}:8080/api/hubitat.xml") { res -> // library marker kkossev.commonLib, line 1362
model = res.data.device.modelName // library marker kkossev.commonLib, line 1363
return model // library marker kkossev.commonLib, line 1364
} // library marker kkossev.commonLib, line 1365
} catch (ignore_again) { // library marker kkossev.commonLib, line 1366
return '' // library marker kkossev.commonLib, line 1367
} // library marker kkossev.commonLib, line 1368
} // library marker kkossev.commonLib, line 1369
} // library marker kkossev.commonLib, line 1370
// credits @thebearmay // library marker kkossev.commonLib, line 1372
boolean isCompatible(Integer minLevel) { //check to see if the hub version meets the minimum requirement ( 7 or 8 ) // library marker kkossev.commonLib, line 1373
String model = getModel() // Rev C-7 // library marker kkossev.commonLib, line 1374
String[] tokens = model.split('-') // library marker kkossev.commonLib, line 1375
String revision = tokens.last() // library marker kkossev.commonLib, line 1376
return (Integer.parseInt(revision) >= minLevel) // library marker kkossev.commonLib, line 1377
} // library marker kkossev.commonLib, line 1378
void deleteAllStatesAndJobs() { // library marker kkossev.commonLib, line 1380
state.clear() // clear all states // library marker kkossev.commonLib, line 1381
unschedule() // library marker kkossev.commonLib, line 1382
device.deleteCurrentState('*') // library marker kkossev.commonLib, line 1383
device.deleteCurrentState('') // library marker kkossev.commonLib, line 1384
log.info "${device.displayName} jobs and states cleared. HE hub is ${getHubVersion()}, version is ${location.hub.firmwareVersionString}" // library marker kkossev.commonLib, line 1386
} // library marker kkossev.commonLib, line 1387
void resetStatistics() { // library marker kkossev.commonLib, line 1389
runIn(1, 'resetStats') // library marker kkossev.commonLib, line 1390
sendInfoEvent('Statistics are reset. Refresh the web page') // library marker kkossev.commonLib, line 1391
} // library marker kkossev.commonLib, line 1392
// called from initializeVars(true) and resetStatistics() // library marker kkossev.commonLib, line 1394
void resetStats() { // library marker kkossev.commonLib, line 1395
logDebug 'resetStats...' // library marker kkossev.commonLib, line 1396
state.stats = [:] ; state.states = [:] ; state.lastRx = [:] ; state.lastTx = [:] ; state.health = [:] // library marker kkossev.commonLib, line 1397
if (this.respondsTo('groupsLibVersion')) { state.zigbeeGroups = [:] } // library marker kkossev.commonLib, line 1398
state.stats.rxCtr = 0 ; state.stats.txCtr = 0 // library marker kkossev.commonLib, line 1399
state.states['isDigital'] = false ; state.states['isRefresh'] = false ; state.states['isPing'] = false // library marker kkossev.commonLib, line 1400
state.health['offlineCtr'] = 0 ; state.health['checkCtr3'] = 0 // library marker kkossev.commonLib, line 1401
} // library marker kkossev.commonLib, line 1402
void initializeVars( boolean fullInit = false ) { // library marker kkossev.commonLib, line 1404
logDebug "InitializeVars()... fullInit = ${fullInit}" // library marker kkossev.commonLib, line 1405
if (fullInit == true ) { // library marker kkossev.commonLib, line 1406
state.clear() // library marker kkossev.commonLib, line 1407
unschedule() // library marker kkossev.commonLib, line 1408
resetStats() // library marker kkossev.commonLib, line 1409
if (deviceProfilesV3 != null && this.respondsTo('setDeviceNameAndProfile')) { setDeviceNameAndProfile() } // library marker kkossev.commonLib, line 1410
//state.comment = 'Works with Tuya Zigbee Devices' // library marker kkossev.commonLib, line 1411
logInfo 'all states and scheduled jobs cleared!' // library marker kkossev.commonLib, line 1412
state.driverVersion = driverVersionAndTimeStamp() // library marker kkossev.commonLib, line 1413
logInfo "DEVICE_TYPE = ${DEVICE_TYPE}" // library marker kkossev.commonLib, line 1414
state.deviceType = DEVICE_TYPE // library marker kkossev.commonLib, line 1415
sendInfoEvent('Initialized') // library marker kkossev.commonLib, line 1416
} // library marker kkossev.commonLib, line 1417
if (state.stats == null) { state.stats = [:] } // library marker kkossev.commonLib, line 1419
if (state.states == null) { state.states = [:] } // library marker kkossev.commonLib, line 1420
if (state.lastRx == null) { state.lastRx = [:] } // library marker kkossev.commonLib, line 1421
if (state.lastTx == null) { state.lastTx = [:] } // library marker kkossev.commonLib, line 1422
if (state.health == null) { state.health = [:] } // library marker kkossev.commonLib, line 1423
if (fullInit || settings?.txtEnable == null) { device.updateSetting('txtEnable', true) } // library marker kkossev.commonLib, line 1425
if (fullInit || settings?.logEnable == null) { device.updateSetting('logEnable', DEFAULT_DEBUG_LOGGING ?: false) } // library marker kkossev.commonLib, line 1426
if (fullInit || settings?.traceEnable == null) { device.updateSetting('traceEnable', false) } // library marker kkossev.commonLib, line 1427
if (fullInit || settings?.advancedOptions == null) { device.updateSetting('advancedOptions', [value:false, type:'bool']) } // library marker kkossev.commonLib, line 1428
if (fullInit || settings?.healthCheckMethod == null) { device.updateSetting('healthCheckMethod', [value: HealthcheckMethodOpts.defaultValue.toString(), type: 'enum']) } // library marker kkossev.commonLib, line 1429
if (fullInit || settings?.healthCheckInterval == null) { device.updateSetting('healthCheckInterval', [value: HealthcheckIntervalOpts.defaultValue.toString(), type: 'enum']) } // library marker kkossev.commonLib, line 1430
if (fullInit || settings?.voltageToPercent == null) { device.updateSetting('voltageToPercent', false) } // library marker kkossev.commonLib, line 1431
if (device.currentValue('healthStatus') == null) { sendHealthStatusEvent('unknown') } // library marker kkossev.commonLib, line 1433
// common libraries initialization // library marker kkossev.commonLib, line 1435
executeCustomHandler('batteryInitializeVars', fullInit) // added 07/06/2024 // library marker kkossev.commonLib, line 1436
executeCustomHandler('motionInitializeVars', fullInit) // added 07/06/2024 // library marker kkossev.commonLib, line 1437
executeCustomHandler('groupsInitializeVars', fullInit) // library marker kkossev.commonLib, line 1438
executeCustomHandler('illuminanceInitializeVars', fullInit) // library marker kkossev.commonLib, line 1439
executeCustomHandler('onOfInitializeVars', fullInit) // library marker kkossev.commonLib, line 1440
executeCustomHandler('energyInitializeVars', fullInit) // library marker kkossev.commonLib, line 1441
// // library marker kkossev.commonLib, line 1442
executeCustomHandler('deviceProfileInitializeVars', fullInit) // must be before the other deviceProfile initialization handlers! // library marker kkossev.commonLib, line 1443
executeCustomHandler('initEventsDeviceProfile', fullInit) // added 07/06/2024 // library marker kkossev.commonLib, line 1444
// // library marker kkossev.commonLib, line 1445
// custom device driver specific initialization should be at the end // library marker kkossev.commonLib, line 1446
executeCustomHandler('customInitializeVars', fullInit) // library marker kkossev.commonLib, line 1447
executeCustomHandler('customCreateChildDevices', fullInit) // library marker kkossev.commonLib, line 1448
executeCustomHandler('customInitEvents', fullInit) // library marker kkossev.commonLib, line 1449
final String mm = device.getDataValue('model') // library marker kkossev.commonLib, line 1451
if (mm != null) { logTrace " model = ${mm}" } // library marker kkossev.commonLib, line 1452
else { logWarn ' Model not found, please re-pair the device!' } // library marker kkossev.commonLib, line 1453
final String ep = device.getEndpointId() // library marker kkossev.commonLib, line 1454
if ( ep != null) { // library marker kkossev.commonLib, line 1455
//state.destinationEP = ep // library marker kkossev.commonLib, line 1456
logTrace " destinationEP = ${ep}" // library marker kkossev.commonLib, line 1457
} // library marker kkossev.commonLib, line 1458
else { // library marker kkossev.commonLib, line 1459
logWarn ' Destination End Point not found, please re-pair the device!' // library marker kkossev.commonLib, line 1460
//state.destinationEP = "01" // fallback // library marker kkossev.commonLib, line 1461
} // library marker kkossev.commonLib, line 1462
} // library marker kkossev.commonLib, line 1463
// not used!? // library marker kkossev.commonLib, line 1465
void setDestinationEP() { // library marker kkossev.commonLib, line 1466
String ep = device.getEndpointId() // library marker kkossev.commonLib, line 1467
if (ep != null && ep != 'F2') { state.destinationEP = ep ; logDebug "setDestinationEP() destinationEP = ${state.destinationEP}" } // library marker kkossev.commonLib, line 1468
else { logWarn "setDestinationEP() Destination End Point not found or invalid(${ep}), activating the F2 bug patch!" ; state.destinationEP = '01' } // fallback EP // library marker kkossev.commonLib, line 1469
} // library marker kkossev.commonLib, line 1470
void logDebug(final String msg) { if (settings?.logEnable) { log.debug "${device.displayName} " + msg } } // library marker kkossev.commonLib, line 1472
void logInfo(final String msg) { if (settings?.txtEnable) { log.info "${device.displayName} " + msg } } // library marker kkossev.commonLib, line 1473
void logWarn(final String msg) { if (settings?.logEnable) { log.warn "${device.displayName} " + msg } } // library marker kkossev.commonLib, line 1474
void logTrace(final String msg) { if (settings?.traceEnable) { log.trace "${device.displayName} " + msg } } // library marker kkossev.commonLib, line 1475
// _DEBUG mode only // library marker kkossev.commonLib, line 1477
void getAllProperties() { // library marker kkossev.commonLib, line 1478
log.trace 'Properties:' ; device.properties.each { it -> log.debug it } // library marker kkossev.commonLib, line 1479
log.trace 'Settings:' ; settings.each { it -> log.debug "${it.key} = ${it.value}" } // https://community.hubitat.com/t/how-do-i-get-the-datatype-for-an-app-setting/104228/6?u=kkossev // library marker kkossev.commonLib, line 1480
} // library marker kkossev.commonLib, line 1481
// delete all Preferences // library marker kkossev.commonLib, line 1483
void deleteAllSettings() { // library marker kkossev.commonLib, line 1484
String preferencesDeleted = '' // library marker kkossev.commonLib, line 1485
settings.each { it -> preferencesDeleted += "${it.key} (${it.value}), " ; device.removeSetting("${it.key}") } // library marker kkossev.commonLib, line 1486
logDebug "Deleted settings: ${preferencesDeleted}" // library marker kkossev.commonLib, line 1487
logInfo 'All settings (preferences) DELETED' // library marker kkossev.commonLib, line 1488
} // library marker kkossev.commonLib, line 1489
// delete all attributes // library marker kkossev.commonLib, line 1491
void deleteAllCurrentStates() { // library marker kkossev.commonLib, line 1492
String attributesDeleted = '' // library marker kkossev.commonLib, line 1493
device.properties.supportedAttributes.each { it -> attributesDeleted += "${it}, " ; device.deleteCurrentState("$it") } // library marker kkossev.commonLib, line 1494
logDebug "Deleted attributes: ${attributesDeleted}" ; logInfo 'All current states (attributes) DELETED' // library marker kkossev.commonLib, line 1495
} // library marker kkossev.commonLib, line 1496
// delete all State Variables // library marker kkossev.commonLib, line 1498
void deleteAllStates() { // library marker kkossev.commonLib, line 1499
String stateDeleted = '' // library marker kkossev.commonLib, line 1500
state.each { it -> stateDeleted += "${it.key}, " } // library marker kkossev.commonLib, line 1501
state.clear() // library marker kkossev.commonLib, line 1502
logDebug "Deleted states: ${stateDeleted}" ; logInfo 'All States DELETED' // library marker kkossev.commonLib, line 1503
} // library marker kkossev.commonLib, line 1504
void deleteAllScheduledJobs() { // library marker kkossev.commonLib, line 1506
unschedule() ; logInfo 'All scheduled jobs DELETED' // library marker kkossev.commonLib, line 1507
} // library marker kkossev.commonLib, line 1508
void deleteAllChildDevices() { // library marker kkossev.commonLib, line 1510
getChildDevices().each { child -> log.info "${device.displayName} Deleting ${child.deviceNetworkId}" ; deleteChildDevice(child.deviceNetworkId) } // library marker kkossev.commonLib, line 1511
sendInfoEvent 'All child devices DELETED' // library marker kkossev.commonLib, line 1512
} // library marker kkossev.commonLib, line 1513
void testParse(String par) { // library marker kkossev.commonLib, line 1515
//read attr - raw: DF8D0104020A000029280A, dni: DF8D, endpoint: 01, cluster: 0402, size: 0A, attrId: 0000, encoding: 29, command: 0A, value: 280A // library marker kkossev.commonLib, line 1516
log.trace '------------------------------------------------------' // library marker kkossev.commonLib, line 1517
log.warn "testParse - START (${par})" // library marker kkossev.commonLib, line 1518
parse(par) // library marker kkossev.commonLib, line 1519
log.warn "testParse - END (${par})" // library marker kkossev.commonLib, line 1520
log.trace '------------------------------------------------------' // library marker kkossev.commonLib, line 1521
} // library marker kkossev.commonLib, line 1522
Object testJob() { // library marker kkossev.commonLib, line 1524
log.warn 'test job executed' // library marker kkossev.commonLib, line 1525
} // library marker kkossev.commonLib, line 1526
/** // library marker kkossev.commonLib, line 1528
* Calculates and returns the cron expression // library marker kkossev.commonLib, line 1529
* @param timeInSeconds interval in seconds // library marker kkossev.commonLib, line 1530
*/ // library marker kkossev.commonLib, line 1531
String getCron(int timeInSeconds) { // library marker kkossev.commonLib, line 1532
//schedule("${rnd.nextInt(59)} ${rnd.nextInt(9)}/${intervalMins} * ? * * *", 'ping') // library marker kkossev.commonLib, line 1533
// TODO: runEvery1Minute runEvery5Minutes runEvery10Minutes runEvery15Minutes runEvery30Minutes runEvery1Hour runEvery3Hours // library marker kkossev.commonLib, line 1534
final Random rnd = new Random() // library marker kkossev.commonLib, line 1535
int minutes = (timeInSeconds / 60 ) as int // library marker kkossev.commonLib, line 1536
int hours = (minutes / 60 ) as int // library marker kkossev.commonLib, line 1537
if (hours > 23) { hours = 23 } // library marker kkossev.commonLib, line 1538
String cron // library marker kkossev.commonLib, line 1539
if (timeInSeconds < 60) { cron = "*/$timeInSeconds * * * * ? *" } // library marker kkossev.commonLib, line 1540
else { // library marker kkossev.commonLib, line 1541
if (minutes < 60) { cron = "${rnd.nextInt(59)} ${rnd.nextInt(9)}/$minutes * ? * *" } // library marker kkossev.commonLib, line 1542
else { cron = "${rnd.nextInt(59)} ${rnd.nextInt(59)} */$hours ? * *" } // library marker kkossev.commonLib, line 1543
} // library marker kkossev.commonLib, line 1544
return cron // library marker kkossev.commonLib, line 1545
} // library marker kkossev.commonLib, line 1546
// credits @thebearmay // library marker kkossev.commonLib, line 1548
String formatUptime() { // library marker kkossev.commonLib, line 1549
return formatTime(location.hub.uptime) // library marker kkossev.commonLib, line 1550
} // library marker kkossev.commonLib, line 1551
String formatTime(int timeInSeconds) { // library marker kkossev.commonLib, line 1553
if (timeInSeconds == null) { return UNKNOWN } // library marker kkossev.commonLib, line 1554
int days = (timeInSeconds / 86400).toInteger() // library marker kkossev.commonLib, line 1555
int hours = ((timeInSeconds % 86400) / 3600).toInteger() // library marker kkossev.commonLib, line 1556
int minutes = ((timeInSeconds % 3600) / 60).toInteger() // library marker kkossev.commonLib, line 1557
int seconds = (timeInSeconds % 60).toInteger() // library marker kkossev.commonLib, line 1558
return "${days}d ${hours}h ${minutes}m ${seconds}s" // library marker kkossev.commonLib, line 1559
} // library marker kkossev.commonLib, line 1560
boolean isTuya() { // library marker kkossev.commonLib, line 1562
if (!device) { return true } // fallback - added 04/03/2024 // library marker kkossev.commonLib, line 1563
String model = device.getDataValue('model') // library marker kkossev.commonLib, line 1564
String manufacturer = device.getDataValue('manufacturer') // library marker kkossev.commonLib, line 1565
/* groovylint-disable-next-line UnnecessaryTernaryExpression */ // library marker kkossev.commonLib, line 1566
return (model?.startsWith('TS') && manufacturer?.startsWith('_T')) ? true : false // library marker kkossev.commonLib, line 1567
} // library marker kkossev.commonLib, line 1568
void updateTuyaVersion() { // library marker kkossev.commonLib, line 1570
if (!isTuya()) { logTrace 'not Tuya' ; return } // library marker kkossev.commonLib, line 1571
final String application = device.getDataValue('application') // library marker kkossev.commonLib, line 1572
if (application != null) { // library marker kkossev.commonLib, line 1573
Integer ver // library marker kkossev.commonLib, line 1574
try { ver = zigbee.convertHexToInt(application) } // library marker kkossev.commonLib, line 1575
catch (e) { logWarn "exception caught while converting application version ${application} to tuyaVersion"; return } // library marker kkossev.commonLib, line 1576
final String str = ((ver & 0xC0) >> 6).toString() + '.' + ((ver & 0x30) >> 4).toString() + '.' + (ver & 0x0F).toString() // library marker kkossev.commonLib, line 1577
if (device.getDataValue('tuyaVersion') != str) { // library marker kkossev.commonLib, line 1578
device.updateDataValue('tuyaVersion', str) // library marker kkossev.commonLib, line 1579
logInfo "tuyaVersion set to $str" // library marker kkossev.commonLib, line 1580
} // library marker kkossev.commonLib, line 1581
} // library marker kkossev.commonLib, line 1582
} // library marker kkossev.commonLib, line 1583
boolean isAqara() { return device.getDataValue('model')?.startsWith('lumi') ?: false } // library marker kkossev.commonLib, line 1585
void updateAqaraVersion() { // library marker kkossev.commonLib, line 1587
if (!isAqara()) { logTrace 'not Aqara' ; return } // library marker kkossev.commonLib, line 1588
String application = device.getDataValue('application') // library marker kkossev.commonLib, line 1589
if (application != null) { // library marker kkossev.commonLib, line 1590
String str = '0.0.0_' + String.format('%04d', zigbee.convertHexToInt(application.take(2))) // library marker kkossev.commonLib, line 1591
if (device.getDataValue('aqaraVersion') != str) { // library marker kkossev.commonLib, line 1592
device.updateDataValue('aqaraVersion', str) // library marker kkossev.commonLib, line 1593
logInfo "aqaraVersion set to $str" // library marker kkossev.commonLib, line 1594
} // library marker kkossev.commonLib, line 1595
} // library marker kkossev.commonLib, line 1596
} // library marker kkossev.commonLib, line 1597
String unix2formattedDate(Long unixTime) { // library marker kkossev.commonLib, line 1599
try { // library marker kkossev.commonLib, line 1600
if (unixTime == null) { return null } // library marker kkossev.commonLib, line 1601
/* groovylint-disable-next-line NoJavaUtilDate */ // library marker kkossev.commonLib, line 1602
Date date = new Date(unixTime.toLong()) // library marker kkossev.commonLib, line 1603
return date.format('yyyy-MM-dd HH:mm:ss.SSS', location.timeZone) // library marker kkossev.commonLib, line 1604
} catch (e) { // library marker kkossev.commonLib, line 1605
logDebug "Error formatting date: ${e.message}. Returning current time instead." // library marker kkossev.commonLib, line 1606
return new Date().format('yyyy-MM-dd HH:mm:ss.SSS', location.timeZone) // library marker kkossev.commonLib, line 1607
} // library marker kkossev.commonLib, line 1608
} // library marker kkossev.commonLib, line 1609
Long formattedDate2unix(String formattedDate) { // library marker kkossev.commonLib, line 1611
try { // library marker kkossev.commonLib, line 1612
if (formattedDate == null) { return null } // library marker kkossev.commonLib, line 1613
Date date = Date.parse('yyyy-MM-dd HH:mm:ss.SSS', formattedDate) // library marker kkossev.commonLib, line 1614
return date.getTime() // library marker kkossev.commonLib, line 1615
} catch (e) { // library marker kkossev.commonLib, line 1616
logDebug "Error parsing formatted date: ${formattedDate}. Returning current time instead." // library marker kkossev.commonLib, line 1617
return now() // library marker kkossev.commonLib, line 1618
} // library marker kkossev.commonLib, line 1619
} // library marker kkossev.commonLib, line 1620
static String timeToHMS(final int time) { // library marker kkossev.commonLib, line 1622
int hours = (time / 3600) as int // library marker kkossev.commonLib, line 1623
int minutes = ((time % 3600) / 60) as int // library marker kkossev.commonLib, line 1624
int seconds = time % 60 // library marker kkossev.commonLib, line 1625
return "${hours}h ${minutes}m ${seconds}s" // library marker kkossev.commonLib, line 1626
} // library marker kkossev.commonLib, line 1627
// ~~~~~ end include (144) kkossev.commonLib ~~~~~
// ~~~~~ start include (176) kkossev.onOffLib ~~~~~
/* groovylint-disable CompileStatic, CouldBeSwitchStatement, DuplicateListLiteral, DuplicateMapLiteral, DuplicateNumberLiteral, DuplicateStringLiteral, ImplicitClosureParameter, ImplicitReturnStatement, Instanceof, LineLength, MethodCount, MethodSize, NoDouble, NoFloat, NoWildcardImports, ParameterCount, ParameterName, PublicMethodsBeforeNonPublicMethods, UnnecessaryElseStatement, UnnecessaryGetter, UnnecessaryObjectReferences, UnnecessaryPublicModifier, UnnecessarySetter, UnusedImport */ // library marker kkossev.onOffLib, line 1
library( // library marker kkossev.onOffLib, line 2
base: 'driver', author: 'Krassimir Kossev', category: 'zigbee', description: 'Zigbee OnOff Cluster Library', name: 'onOffLib', namespace: 'kkossev', // library marker kkossev.onOffLib, line 3
importUrl: 'https://raw.githubusercontent.com/kkossev/hubitat/development/libraries/onOffLib.groovy', documentationLink: '', // library marker kkossev.onOffLib, line 4
version: '3.2.2' // library marker kkossev.onOffLib, line 5
) // library marker kkossev.onOffLib, line 6
/* // library marker kkossev.onOffLib, line 7
* Zigbee OnOff Cluster Library // library marker kkossev.onOffLib, line 8
* // library marker kkossev.onOffLib, line 9
* Licensed Virtual the Apache License, Version 2.0 (the "License"); you may not use this file except // library marker kkossev.onOffLib, line 10
* in compliance with the License. You may obtain a copy of the License at: // library marker kkossev.onOffLib, line 11
* // library marker kkossev.onOffLib, line 12
* http://www.apache.org/licenses/LICENSE-2.0 // library marker kkossev.onOffLib, line 13
* // library marker kkossev.onOffLib, line 14
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed // library marker kkossev.onOffLib, line 15
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License // library marker kkossev.onOffLib, line 16
* for the specific language governing permissions and limitations under the License. // library marker kkossev.onOffLib, line 17
* // library marker kkossev.onOffLib, line 18
* ver. 3.2.0 2024-06-04 kkossev - commonLib 3.2.1 allignment; if isRefresh then sendEvent with isStateChange = true // library marker kkossev.onOffLib, line 19
* ver. 3.2.1 2024-06-07 kkossev - the advanced options are excpluded for DEVICE_TYPE Thermostat // library marker kkossev.onOffLib, line 20
* ver. 3.2.2 2024-06-29 kkossev - added on/off control for Tuya device profiles with 'switch' dp; // library marker kkossev.onOffLib, line 21
* // library marker kkossev.onOffLib, line 22
* TODO: // library marker kkossev.onOffLib, line 23
*/ // library marker kkossev.onOffLib, line 24
static String onOffLibVersion() { '3.2.2' } // library marker kkossev.onOffLib, line 26
static String onOffLibStamp() { '2024/06/29 12:27 PM' } // library marker kkossev.onOffLib, line 27
@Field static final Boolean _THREE_STATE = true // library marker kkossev.onOffLib, line 29
metadata { // library marker kkossev.onOffLib, line 31
capability 'Actuator' // library marker kkossev.onOffLib, line 32
capability 'Switch' // library marker kkossev.onOffLib, line 33
if (_THREE_STATE == true) { // library marker kkossev.onOffLib, line 34
attribute 'switch', 'enum', SwitchThreeStateOpts.options.values() as List // library marker kkossev.onOffLib, line 35
} // library marker kkossev.onOffLib, line 36
// no commands // library marker kkossev.onOffLib, line 37
preferences { // library marker kkossev.onOffLib, line 38
if (settings?.advancedOptions == true && device != null && !(DEVICE_TYPE in ['Device', 'Thermostat'])) { // library marker kkossev.onOffLib, line 39
input(name: 'ignoreDuplicated', type: 'bool', title: 'Ignore Duplicated Switch Events', description: 'Some switches and plugs send periodically the switch status as a heart-beet ', defaultValue: true) // library marker kkossev.onOffLib, line 40
input(name: 'alwaysOn', type: 'bool', title: 'Always On', description: 'Disable switching off plugs and switches that must stay always On', defaultValue: false) // library marker kkossev.onOffLib, line 41
if (_THREE_STATE == true) { // library marker kkossev.onOffLib, line 42
input name: 'threeStateEnable', type: 'bool', title: 'Enable three-states events', description: 'Experimental multi-state switch events', defaultValue: false // library marker kkossev.onOffLib, line 43
} // library marker kkossev.onOffLib, line 44
} // library marker kkossev.onOffLib, line 45
} // library marker kkossev.onOffLib, line 46
} // library marker kkossev.onOffLib, line 47
@Field static final Map SwitchThreeStateOpts = [ // library marker kkossev.onOffLib, line 49
defaultValue: 0, options: [0: 'off', 1: 'on', 2: 'switching_off', 3: 'switching_on', 4: 'switch_failure'] // library marker kkossev.onOffLib, line 50
] // library marker kkossev.onOffLib, line 51
@Field static final Map powerOnBehaviourOptions = [ // library marker kkossev.onOffLib, line 53
'0': 'switch off', '1': 'switch on', '2': 'switch last state' // library marker kkossev.onOffLib, line 54
] // library marker kkossev.onOffLib, line 55
@Field static final Map switchTypeOptions = [ // library marker kkossev.onOffLib, line 57
'0': 'toggle', '1': 'state', '2': 'momentary' // library marker kkossev.onOffLib, line 58
] // library marker kkossev.onOffLib, line 59
private boolean isCircuitBreaker() { device.getDataValue('manufacturer') in ['_TZ3000_ky0fq4ho'] } // library marker kkossev.onOffLib, line 61
/* // library marker kkossev.onOffLib, line 63
* ----------------------------------------------------------------------------- // library marker kkossev.onOffLib, line 64
* on/off cluster 0x0006 TODO - move to a library !!!!!!!!!!!!!!! // library marker kkossev.onOffLib, line 65
* ----------------------------------------------------------------------------- // library marker kkossev.onOffLib, line 66
*/ // library marker kkossev.onOffLib, line 67
void standardParseOnOffCluster(final Map descMap) { // library marker kkossev.onOffLib, line 68
/* // library marker kkossev.onOffLib, line 69
if (this.respondsTo('customParseOnOffCluster')) { // library marker kkossev.onOffLib, line 70
customParseOnOffCluster(descMap) // library marker kkossev.onOffLib, line 71
} // library marker kkossev.onOffLib, line 72
else */ // library marker kkossev.onOffLib, line 73
if (descMap.attrId == '0000') { // library marker kkossev.onOffLib, line 74
if (descMap.value == null || descMap.value == 'FFFF') { logDebug "parseOnOffCluster: invalid value: ${descMap.value}"; return } // invalid or unknown value // library marker kkossev.onOffLib, line 75
int rawValue = hexStrToUnsignedInt(descMap.value) // library marker kkossev.onOffLib, line 76
sendSwitchEvent(rawValue) // library marker kkossev.onOffLib, line 77
} // library marker kkossev.onOffLib, line 78
else if (descMap.attrId in ['4000', '4001', '4002', '4004', '8000', '8001', '8002', '8003']) { // library marker kkossev.onOffLib, line 79
parseOnOffAttributes(descMap) // library marker kkossev.onOffLib, line 80
} // library marker kkossev.onOffLib, line 81
else { // library marker kkossev.onOffLib, line 82
if (descMap.attrId != null) { logWarn "standardParseOnOffCluster: unprocessed attrId ${descMap.attrId}" } // library marker kkossev.onOffLib, line 83
else { logDebug "standardParseOnOffCluster: skipped processing OnOff cluster (attrId is ${descMap.attrId})" } // ZigUSB has its own interpretation of the Zigbee standards ... :( // library marker kkossev.onOffLib, line 84
} // library marker kkossev.onOffLib, line 85
} // library marker kkossev.onOffLib, line 86
void toggleX() { // library marker kkossev.onOffLib, line 88
String descriptionText = 'central button switch is ' // library marker kkossev.onOffLib, line 89
String state = '' // library marker kkossev.onOffLib, line 90
if ((device.currentState('switch')?.value ?: 'n/a') == 'off') { // library marker kkossev.onOffLib, line 91
state = 'on' // library marker kkossev.onOffLib, line 92
} // library marker kkossev.onOffLib, line 93
else { // library marker kkossev.onOffLib, line 94
state = 'off' // library marker kkossev.onOffLib, line 95
} // library marker kkossev.onOffLib, line 96
descriptionText += state // library marker kkossev.onOffLib, line 97
sendEvent(name: 'switch', value: state, descriptionText: descriptionText, type: 'physical', isStateChange: true) // library marker kkossev.onOffLib, line 98
logInfo "${descriptionText}" // library marker kkossev.onOffLib, line 99
} // library marker kkossev.onOffLib, line 100
void off() { // library marker kkossev.onOffLib, line 102
if (this.respondsTo('customOff')) { customOff() ; return } // library marker kkossev.onOffLib, line 103
if ((settings?.alwaysOn ?: false) == true) { logWarn "AlwaysOn option for ${device.displayName} is enabled , the command to switch it OFF is ignored!" ; return } // library marker kkossev.onOffLib, line 104
List cmds = [] // library marker kkossev.onOffLib, line 105
// added 06/29/2024 - control Tuya 0xEF00 switch // library marker kkossev.onOffLib, line 106
if (this.respondsTo(getDEVICE)) { // defined in deviceProfileLib // library marker kkossev.onOffLib, line 107
Map switchMap = getAttributesMap('switch') // library marker kkossev.onOffLib, line 108
int onOffValue = (settings?.inverceSwitch == null || settings?.inverceSwitch == false) ? 0 : 1 // library marker kkossev.onOffLib, line 109
if (switchMap != null && switchMap != [:]) { // library marker kkossev.onOffLib, line 110
cmds = sendTuyaParameter(switchMap, 'switch', onOffValue) // library marker kkossev.onOffLib, line 111
logTrace "off() Tuya cmds=${cmds}" // library marker kkossev.onOffLib, line 112
} // library marker kkossev.onOffLib, line 113
} // library marker kkossev.onOffLib, line 114
if (cmds.size() == 0) { // if not Tuya 0xEF00 switch // library marker kkossev.onOffLib, line 115
cmds = (settings?.inverceSwitch == null || settings?.inverceSwitch == false) ? zigbee.off() : zigbee.on() // library marker kkossev.onOffLib, line 116
} // library marker kkossev.onOffLib, line 117
String currentState = device.currentState('switch')?.value ?: 'n/a' // library marker kkossev.onOffLib, line 119
logDebug "off() currentState=${currentState}" // library marker kkossev.onOffLib, line 120
if (_THREE_STATE == true && settings?.threeStateEnable == true) { // library marker kkossev.onOffLib, line 121
if (currentState == 'off') { // library marker kkossev.onOffLib, line 122
runIn(1, 'refresh', [overwrite: true]) // library marker kkossev.onOffLib, line 123
} // library marker kkossev.onOffLib, line 124
String value = SwitchThreeStateOpts.options[2] // 'switching_on' // library marker kkossev.onOffLib, line 125
String descriptionText = "${value}" // library marker kkossev.onOffLib, line 126
if (logEnable) { descriptionText += ' (2)' } // library marker kkossev.onOffLib, line 127
sendEvent(name: 'switch', value: value, descriptionText: descriptionText, type: 'digital', isStateChange: true) // library marker kkossev.onOffLib, line 128
logInfo "${descriptionText}" // library marker kkossev.onOffLib, line 129
} // library marker kkossev.onOffLib, line 130
state.states['isDigital'] = true // library marker kkossev.onOffLib, line 131
runInMillis(DIGITAL_TIMER, clearIsDigital, [overwrite: true]) // library marker kkossev.onOffLib, line 132
sendZigbeeCommands(cmds) // library marker kkossev.onOffLib, line 133
} // library marker kkossev.onOffLib, line 134
void on() { // library marker kkossev.onOffLib, line 136
if (this.respondsTo('customOn')) { customOn() ; return } // library marker kkossev.onOffLib, line 137
List cmds = [] // library marker kkossev.onOffLib, line 138
// added 06/29/2024 - control Tuya 0xEF00 switch // library marker kkossev.onOffLib, line 139
if (this.respondsTo(getDEVICE)) { // defined in deviceProfileLib // library marker kkossev.onOffLib, line 140
Map switchMap = getAttributesMap('switch') // library marker kkossev.onOffLib, line 141
int onOffValue = (settings?.inverceSwitch == null || settings?.inverceSwitch == false) ? 1 : 0 // library marker kkossev.onOffLib, line 142
if (switchMap != null && switchMap != [:]) { // library marker kkossev.onOffLib, line 143
cmds = sendTuyaParameter(switchMap, 'switch', onOffValue) // library marker kkossev.onOffLib, line 144
logTrace "on() Tuya cmds=${cmds}" // library marker kkossev.onOffLib, line 145
} // library marker kkossev.onOffLib, line 146
} // library marker kkossev.onOffLib, line 147
if (cmds.size() == 0) { // if not Tuya 0xEF00 switch // library marker kkossev.onOffLib, line 148
cmds = (settings?.inverceSwitch == null || settings?.inverceSwitch == false) ? zigbee.on() : zigbee.off() // library marker kkossev.onOffLib, line 149
} // library marker kkossev.onOffLib, line 150
String currentState = device.currentState('switch')?.value ?: 'n/a' // library marker kkossev.onOffLib, line 151
logDebug "on() currentState=${currentState}" // library marker kkossev.onOffLib, line 152
if (_THREE_STATE == true && settings?.threeStateEnable == true) { // library marker kkossev.onOffLib, line 153
if ((device.currentState('switch')?.value ?: 'n/a') == 'on') { // library marker kkossev.onOffLib, line 154
runIn(1, 'refresh', [overwrite: true]) // library marker kkossev.onOffLib, line 155
} // library marker kkossev.onOffLib, line 156
String value = SwitchThreeStateOpts.options[3] // 'switching_on' // library marker kkossev.onOffLib, line 157
String descriptionText = "${value}" // library marker kkossev.onOffLib, line 158
if (logEnable) { descriptionText += ' (2)' } // library marker kkossev.onOffLib, line 159
sendEvent(name: 'switch', value: value, descriptionText: descriptionText, type: 'digital', isStateChange: true) // library marker kkossev.onOffLib, line 160
logInfo "${descriptionText}" // library marker kkossev.onOffLib, line 161
} // library marker kkossev.onOffLib, line 162
state.states['isDigital'] = true // library marker kkossev.onOffLib, line 163
runInMillis(DIGITAL_TIMER, clearIsDigital, [overwrite: true]) // library marker kkossev.onOffLib, line 164
sendZigbeeCommands(cmds) // library marker kkossev.onOffLib, line 165
} // library marker kkossev.onOffLib, line 166
void sendSwitchEvent(int switchValuePar) { // library marker kkossev.onOffLib, line 168
int switchValue = safeToInt(switchValuePar) // library marker kkossev.onOffLib, line 169
if (settings?.inverceSwitch != null && settings?.inverceSwitch == true) { // library marker kkossev.onOffLib, line 170
switchValue = (switchValue == 0x00) ? 0x01 : 0x00 // library marker kkossev.onOffLib, line 171
} // library marker kkossev.onOffLib, line 172
String value = (switchValue == null) ? 'unknown' : (switchValue == 0x00) ? 'off' : (switchValue == 0x01) ? 'on' : 'unknown' // library marker kkossev.onOffLib, line 173
Map map = [:] // library marker kkossev.onOffLib, line 174
boolean isRefresh = state.states['isRefresh'] ?: false // library marker kkossev.onOffLib, line 175
boolean debounce = state.states['debounce'] ?: false // library marker kkossev.onOffLib, line 176
String lastSwitch = state.states['lastSwitch'] ?: 'unknown' // library marker kkossev.onOffLib, line 177
if (value == lastSwitch && (debounce || (settings.ignoreDuplicated ?: false)) && !isRefresh) { // library marker kkossev.onOffLib, line 178
logDebug "Ignored duplicated switch event ${value}" // library marker kkossev.onOffLib, line 179
runInMillis(DEBOUNCING_TIMER, switchDebouncingClear, [overwrite: true]) // library marker kkossev.onOffLib, line 180
return // library marker kkossev.onOffLib, line 181
} // library marker kkossev.onOffLib, line 182
logTrace "value=${value} lastSwitch=${state.states['lastSwitch']}" // library marker kkossev.onOffLib, line 183
boolean isDigital = state.states['isDigital'] ?: false // library marker kkossev.onOffLib, line 184
map.type = isDigital ? 'digital' : 'physical' // library marker kkossev.onOffLib, line 185
if (lastSwitch != value) { // library marker kkossev.onOffLib, line 186
logDebug "switch state changed from ${lastSwitch} to ${value}" // library marker kkossev.onOffLib, line 187
state.states['debounce'] = true // library marker kkossev.onOffLib, line 188
state.states['lastSwitch'] = value // library marker kkossev.onOffLib, line 189
runInMillis(DEBOUNCING_TIMER, switchDebouncingClear, [overwrite: true]) // library marker kkossev.onOffLib, line 190
} else { // library marker kkossev.onOffLib, line 191
state.states['debounce'] = true // library marker kkossev.onOffLib, line 192
runInMillis(DEBOUNCING_TIMER, switchDebouncingClear, [overwrite: true]) // library marker kkossev.onOffLib, line 193
} // library marker kkossev.onOffLib, line 194
map.name = 'switch' // library marker kkossev.onOffLib, line 195
map.value = value // library marker kkossev.onOffLib, line 196
if (isRefresh) { // library marker kkossev.onOffLib, line 197
map.descriptionText = "${device.displayName} is ${value} [Refresh]" // library marker kkossev.onOffLib, line 198
map.isStateChange = true // library marker kkossev.onOffLib, line 199
} else { // library marker kkossev.onOffLib, line 200
map.descriptionText = "${device.displayName} is ${value} [${map.type}]" // library marker kkossev.onOffLib, line 201
} // library marker kkossev.onOffLib, line 202
logInfo "${map.descriptionText}" // library marker kkossev.onOffLib, line 203
sendEvent(map) // library marker kkossev.onOffLib, line 204
clearIsDigital() // library marker kkossev.onOffLib, line 205
if (this.respondsTo('customSwitchEventPostProcesing')) { // library marker kkossev.onOffLib, line 206
customSwitchEventPostProcesing(map) // library marker kkossev.onOffLib, line 207
} // library marker kkossev.onOffLib, line 208
} // library marker kkossev.onOffLib, line 209
void parseOnOffAttributes(final Map it) { // library marker kkossev.onOffLib, line 211
logDebug "OnOff attribute ${it.attrId} cluster ${it.cluster } reported: value=${it.value}" // library marker kkossev.onOffLib, line 212
/* groovylint-disable-next-line VariableTypeRequired */ // library marker kkossev.onOffLib, line 213
String mode // library marker kkossev.onOffLib, line 214
String attrName // library marker kkossev.onOffLib, line 215
if (it.value == null) { // library marker kkossev.onOffLib, line 216
logDebug "OnOff attribute ${it.attrId} cluster ${it.cluster } skipping NULL value status=${it.status}" // library marker kkossev.onOffLib, line 217
return // library marker kkossev.onOffLib, line 218
} // library marker kkossev.onOffLib, line 219
int value = zigbee.convertHexToInt(it.value) // library marker kkossev.onOffLib, line 220
switch (it.attrId) { // library marker kkossev.onOffLib, line 221
case '4000' : // non-Tuya GlobalSceneControl (bool), read-only // library marker kkossev.onOffLib, line 222
attrName = 'Global Scene Control' // library marker kkossev.onOffLib, line 223
mode = value == 0 ? 'off' : value == 1 ? 'on' : null // library marker kkossev.onOffLib, line 224
break // library marker kkossev.onOffLib, line 225
case '4001' : // non-Tuya OnTime (UINT16), read-only // library marker kkossev.onOffLib, line 226
attrName = 'On Time' // library marker kkossev.onOffLib, line 227
mode = value // library marker kkossev.onOffLib, line 228
break // library marker kkossev.onOffLib, line 229
case '4002' : // non-Tuya OffWaitTime (UINT16), read-only // library marker kkossev.onOffLib, line 230
attrName = 'Off Wait Time' // library marker kkossev.onOffLib, line 231
mode = value // library marker kkossev.onOffLib, line 232
break // library marker kkossev.onOffLib, line 233
case '4003' : // non-Tuya "powerOnState" (ENUM8), read-write, default=1 // library marker kkossev.onOffLib, line 234
attrName = 'Power On State' // library marker kkossev.onOffLib, line 235
mode = value == 0 ? 'off' : value == 1 ? 'on' : value == 2 ? 'Last state' : 'UNKNOWN' // library marker kkossev.onOffLib, line 236
break // library marker kkossev.onOffLib, line 237
case '8000' : // command "childLock", [[name:"Child Lock", type: "ENUM", description: "Select Child Lock mode", constraints: ["off", "on"]]] // library marker kkossev.onOffLib, line 238
attrName = 'Child Lock' // library marker kkossev.onOffLib, line 239
mode = value == 0 ? 'off' : 'on' // library marker kkossev.onOffLib, line 240
break // library marker kkossev.onOffLib, line 241
case '8001' : // command "ledMode", [[name:"LED mode", type: "ENUM", description: "Select LED mode", constraints: ["Disabled", "Lit when On", "Lit when Off", "Always Green", "Red when On; Green when Off", "Green when On; Red when Off", "Always Red" ]]] // library marker kkossev.onOffLib, line 242
attrName = 'LED mode' // library marker kkossev.onOffLib, line 243
if (isCircuitBreaker()) { // library marker kkossev.onOffLib, line 244
mode = value == 0 ? 'Always Green' : value == 1 ? 'Red when On; Green when Off' : value == 2 ? 'Green when On; Red when Off' : value == 3 ? 'Always Red' : null // library marker kkossev.onOffLib, line 245
} // library marker kkossev.onOffLib, line 246
else { // library marker kkossev.onOffLib, line 247
mode = value == 0 ? 'Disabled' : value == 1 ? 'Lit when On' : value == 2 ? 'Lit when Off' : value == 3 ? 'Freeze' : null // library marker kkossev.onOffLib, line 248
} // library marker kkossev.onOffLib, line 249
break // library marker kkossev.onOffLib, line 250
case '8002' : // command "powerOnState", [[name:"Power On State", type: "ENUM", description: "Select Power On State", constraints: ["off","on", "Last state"]]] // library marker kkossev.onOffLib, line 251
attrName = 'Power On State' // library marker kkossev.onOffLib, line 252
mode = value == 0 ? 'off' : value == 1 ? 'on' : value == 2 ? 'Last state' : null // library marker kkossev.onOffLib, line 253
break // library marker kkossev.onOffLib, line 254
case '8003' : // Over current alarm // library marker kkossev.onOffLib, line 255
attrName = 'Over current alarm' // library marker kkossev.onOffLib, line 256
mode = value == 0 ? 'Over Current OK' : value == 1 ? 'Over Current Alarm' : null // library marker kkossev.onOffLib, line 257
break // library marker kkossev.onOffLib, line 258
default : // library marker kkossev.onOffLib, line 259
logWarn "Unprocessed Tuya OnOff attribute ${it.attrId} cluster ${it.cluster } reported: value=${it.value}" // library marker kkossev.onOffLib, line 260
return // library marker kkossev.onOffLib, line 261
} // library marker kkossev.onOffLib, line 262
if (settings?.logEnable) { logInfo "${attrName} is ${mode}" } // library marker kkossev.onOffLib, line 263
} // library marker kkossev.onOffLib, line 264
List onOffRefresh() { // library marker kkossev.onOffLib, line 266
logDebug 'onOffRefresh()' // library marker kkossev.onOffLib, line 267
List cmds = zigbee.readAttribute(0x0006, 0x0000, [:], delay = 100) // library marker kkossev.onOffLib, line 268
return cmds // library marker kkossev.onOffLib, line 269
} // library marker kkossev.onOffLib, line 270
void onOfInitializeVars( boolean fullInit = false ) { // library marker kkossev.onOffLib, line 272
logDebug "onOfInitializeVars()... fullInit = ${fullInit}" // library marker kkossev.onOffLib, line 273
if (fullInit || settings?.ignoreDuplicated == null) { device.updateSetting('ignoreDuplicated', true) } // library marker kkossev.onOffLib, line 274
if (fullInit || settings?.alwaysOn == null) { device.updateSetting('alwaysOn', false) } // library marker kkossev.onOffLib, line 275
if ((fullInit || settings?.threeStateEnable == null) && _THREE_STATE == true) { device.updateSetting('threeStateEnable', false) } // library marker kkossev.onOffLib, line 276
} // library marker kkossev.onOffLib, line 277
// ~~~~~ end include (176) kkossev.onOffLib ~~~~~
// ~~~~~ start include (142) kkossev.deviceProfileLib ~~~~~
/* groovylint-disable CompileStatic, CouldBeSwitchStatement, DuplicateListLiteral, DuplicateNumberLiteral, DuplicateStringLiteral, ImplicitClosureParameter, ImplicitReturnStatement, Instanceof, LineLength, MethodCount, MethodSize, NestedBlockDepth, NoDouble, NoFloat, NoWildcardImports, ParameterName, PublicMethodsBeforeNonPublicMethods, UnnecessaryElseStatement, UnnecessaryGetter, UnnecessaryPublicModifier, UnnecessarySetter, UnusedImport */ // library marker kkossev.deviceProfileLib, line 1
library( // library marker kkossev.deviceProfileLib, line 2
base: 'driver', author: 'Krassimir Kossev', category: 'zigbee', description: 'Device Profile Library', name: 'deviceProfileLib', namespace: 'kkossev', // library marker kkossev.deviceProfileLib, line 3
importUrl: 'https://raw.githubusercontent.com/kkossev/Hubitat/refs/heads/development/Libraries/deviceProfileLib.groovy', documentationLink: 'https://github.com/kkossev/Hubitat/wiki/libraries-deviceProfileLib', // library marker kkossev.deviceProfileLib, line 4
version: '3.4.2' // library marker kkossev.deviceProfileLib, line 5
) // library marker kkossev.deviceProfileLib, line 6
/* // library marker kkossev.deviceProfileLib, line 7
* Device Profile Library // library marker kkossev.deviceProfileLib, line 8
* // library marker kkossev.deviceProfileLib, line 9
* Licensed Virtual the Apache License, Version 2.0 (the "License"); you may not use this file except // library marker kkossev.deviceProfileLib, line 10
* in compliance with the License. You may obtain a copy of the License at: // library marker kkossev.deviceProfileLib, line 11
* // library marker kkossev.deviceProfileLib, line 12
* http://www.apache.org/licenses/LICENSE-2.0 // library marker kkossev.deviceProfileLib, line 13
* // library marker kkossev.deviceProfileLib, line 14
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed // library marker kkossev.deviceProfileLib, line 15
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License // library marker kkossev.deviceProfileLib, line 16
* for the specific language governing permissions and limitations under the License. // library marker kkossev.deviceProfileLib, line 17
* // library marker kkossev.deviceProfileLib, line 18
* ver. 1.0.0 2023-11-04 kkossev - added deviceProfileLib (based on Tuya 4 In 1 driver) // library marker kkossev.deviceProfileLib, line 19
* ver. 3.0.0 2023-11-27 kkossev - fixes for use with commonLib; added processClusterAttributeFromDeviceProfile() method; added validateAndFixPreferences() method; inputIt bug fix; signedInt Preproc method; // library marker kkossev.deviceProfileLib, line 20
* ver. 3.0.1 2023-12-02 kkossev - release candidate // library marker kkossev.deviceProfileLib, line 21
* ver. 3.0.2 2023-12-17 kkossev - inputIt moved to the preferences section; setfunction replaced by customSetFunction; Groovy Linting; // library marker kkossev.deviceProfileLib, line 22
* ver. 3.0.4 2024-03-30 kkossev - more Groovy Linting; processClusterAttributeFromDeviceProfile exception fix; // library marker kkossev.deviceProfileLib, line 23
* ver. 3.1.0 2024-04-03 kkossev - more Groovy Linting; deviceProfilesV3, enum pars bug fix; // library marker kkossev.deviceProfileLib, line 24
* ver. 3.1.1 2024-04-21 kkossev - deviceProfilesV3 bug fix; tuyaDPs list of maps bug fix; resetPreferencesToDefaults bug fix; // library marker kkossev.deviceProfileLib, line 25
* ver. 3.1.2 2024-05-05 kkossev - added isSpammyDeviceProfile() // library marker kkossev.deviceProfileLib, line 26
* ver. 3.1.3 2024-05-21 kkossev - skip processClusterAttributeFromDeviceProfile if cluster or attribute or value is missing // library marker kkossev.deviceProfileLib, line 27
* ver. 3.2.0 2024-05-25 kkossev - commonLib 3.2.0 allignment; // library marker kkossev.deviceProfileLib, line 28
* ver. 3.2.1 2024-06-06 kkossev - Tuya Multi Sensor 4 In 1 (V3) driver allignment (customProcessDeviceProfileEvent); getDeviceProfilesMap bug fix; forcedProfile is always shown in preferences; // library marker kkossev.deviceProfileLib, line 29
* ver. 3.3.0 2024-06-29 kkossev - empty preferences bug fix; zclWriteAttribute delay 50 ms; added advanced check in inputIt(); fixed 'Cannot get property 'rw' on null object' bug; fixed enum attributes first event numeric value bug; // library marker kkossev.deviceProfileLib, line 30
* ver. 3.3.1 2024-07-06 kkossev - added powerSource event in the initEventsDeviceProfile // library marker kkossev.deviceProfileLib, line 31
* ver. 3.3.2 2024-08-18 kkossev - release 3.3.2 // library marker kkossev.deviceProfileLib, line 32
* ver. 3.3.3 2024-08-18 kkossev - sendCommand and setPar commands commented out; must be declared in the main driver where really needed // library marker kkossev.deviceProfileLib, line 33
* ver. 3.3.4 2024-09-28 kkossev - fixed exceptions in resetPreferencesToDefaults() and initEventsDeviceProfile() // library marker kkossev.deviceProfileLib, line 34
* ver. 3.4.0 2025-02-02 kkossev - deviceProfilesV3 optimizations (defaultFingerprint); is2in1() mod // library marker kkossev.deviceProfileLib, line 35
* ver. 3.4.1 2025-02-02 kkossev - setPar help improvements; // library marker kkossev.deviceProfileLib, line 36
* ver. 3.4.2 2025-03-24 kkossev - (dev. branch) added refreshFromConfigureReadList() method; documentation update; getDeviceNameAndProfile uses DEVICE.description instead of deviceJoinName // library marker kkossev.deviceProfileLib, line 37
* // library marker kkossev.deviceProfileLib, line 38
* TODO - remove the 2-in-1 patch ! // library marker kkossev.deviceProfileLib, line 39
* TODO - add updateStateUnknownDPs (from the 4-in-1 driver) // library marker kkossev.deviceProfileLib, line 40
* TODO - when [refresh], send Info logs for parameters that are not events or preferences // library marker kkossev.deviceProfileLib, line 41
* TODO: refactor sendAttribute ! sendAttribute exception bug fix for virtual devices; check if String getObjectClassName(Object o) is in 2.3.3.137, can be used? // library marker kkossev.deviceProfileLib, line 42
* TODO: add _DEBUG command (for temporary switching the debug logs on/off) // library marker kkossev.deviceProfileLib, line 43
* TODO: allow NULL parameters default values in the device profiles // library marker kkossev.deviceProfileLib, line 44
* TODO: handle preferences of a type TEXT // library marker kkossev.deviceProfileLib, line 45
* // library marker kkossev.deviceProfileLib, line 46
*/ // library marker kkossev.deviceProfileLib, line 47
static String deviceProfileLibVersion() { '3.4.2' } // library marker kkossev.deviceProfileLib, line 49
static String deviceProfileLibStamp() { '2025/03/24 1:31 PM' } // library marker kkossev.deviceProfileLib, line 50
import groovy.json.* // library marker kkossev.deviceProfileLib, line 51
import groovy.transform.Field // library marker kkossev.deviceProfileLib, line 52
import hubitat.zigbee.clusters.iaszone.ZoneStatus // library marker kkossev.deviceProfileLib, line 53
import hubitat.zigbee.zcl.DataType // library marker kkossev.deviceProfileLib, line 54
import java.util.concurrent.ConcurrentHashMap // library marker kkossev.deviceProfileLib, line 55
import groovy.transform.CompileStatic // library marker kkossev.deviceProfileLib, line 57
metadata { // library marker kkossev.deviceProfileLib, line 59
// no capabilities // library marker kkossev.deviceProfileLib, line 60
// no attributes // library marker kkossev.deviceProfileLib, line 61
/* // library marker kkossev.deviceProfileLib, line 62
// copy the following commands to the main driver, if needed // library marker kkossev.deviceProfileLib, line 63
command 'sendCommand', [ // library marker kkossev.deviceProfileLib, line 64
[name:'command', type: 'STRING', description: 'command name', constraints: ['STRING']], // library marker kkossev.deviceProfileLib, line 65
[name:'val', type: 'STRING', description: 'command parameter value', constraints: ['STRING']] // library marker kkossev.deviceProfileLib, line 66
] // library marker kkossev.deviceProfileLib, line 67
command 'setPar', [ // library marker kkossev.deviceProfileLib, line 68
[name:'par', type: 'STRING', description: 'preference parameter name', constraints: ['STRING']], // library marker kkossev.deviceProfileLib, line 69
[name:'val', type: 'STRING', description: 'preference parameter value', constraints: ['STRING']] // library marker kkossev.deviceProfileLib, line 70
] // library marker kkossev.deviceProfileLib, line 71
*/ // library marker kkossev.deviceProfileLib, line 72
preferences { // library marker kkossev.deviceProfileLib, line 73
if (device) { // library marker kkossev.deviceProfileLib, line 74
input(name: 'forcedProfile', type: 'enum', title: 'Device Profile', description: 'Manually change the Device Profile, if the model/manufacturer was not recognized automatically.
Warning! Manually setting a device profile may not always work!', options: getDeviceProfilesMap()) // library marker kkossev.deviceProfileLib, line 75
// itterate over DEVICE.preferences map and inputIt all // library marker kkossev.deviceProfileLib, line 76
if (DEVICE != null && DEVICE?.preferences != null && DEVICE?.preferences != [:] && DEVICE?.device?.isDepricated != true) { // library marker kkossev.deviceProfileLib, line 77
(DEVICE?.preferences).each { key, value -> // library marker kkossev.deviceProfileLib, line 78
Map inputMap = inputIt(key) // library marker kkossev.deviceProfileLib, line 79
if (inputMap != null && inputMap != [:]) { // library marker kkossev.deviceProfileLib, line 80
input inputMap // library marker kkossev.deviceProfileLib, line 81
} // library marker kkossev.deviceProfileLib, line 82
} // library marker kkossev.deviceProfileLib, line 83
} // library marker kkossev.deviceProfileLib, line 84
} // library marker kkossev.deviceProfileLib, line 85
} // library marker kkossev.deviceProfileLib, line 86
} // library marker kkossev.deviceProfileLib, line 87
private boolean is2in1() { return getDeviceProfile().startsWith('TS0601_2IN1') } // patch! // library marker kkossev.deviceProfileLib, line 89
public String getDeviceProfile() { state?.deviceProfile ?: 'UNKNOWN' } // library marker kkossev.deviceProfileLib, line 91
public Map getDEVICE() { deviceProfilesV3 != null ? deviceProfilesV3[getDeviceProfile()] : deviceProfilesV2 != null ? deviceProfilesV2[getDeviceProfile()] : [:] } // library marker kkossev.deviceProfileLib, line 92
public Set getDeviceProfiles() { deviceProfilesV3 != null ? deviceProfilesV3?.keySet() : deviceProfilesV2 != null ? deviceProfilesV2?.keySet() : [] } // library marker kkossev.deviceProfileLib, line 93
public List getDeviceProfilesMap() { // library marker kkossev.deviceProfileLib, line 95
if (deviceProfilesV3 == null) { // library marker kkossev.deviceProfileLib, line 96
if (deviceProfilesV2 == null) { return [] } // library marker kkossev.deviceProfileLib, line 97
return deviceProfilesV2.values().description as List // library marker kkossev.deviceProfileLib, line 98
} // library marker kkossev.deviceProfileLib, line 99
List activeProfiles = [] // library marker kkossev.deviceProfileLib, line 100
deviceProfilesV3.each { profileName, profileMap -> // library marker kkossev.deviceProfileLib, line 101
if ((profileMap.device?.isDepricated ?: false) != true) { // library marker kkossev.deviceProfileLib, line 102
activeProfiles.add(profileMap.description ?: '---') // library marker kkossev.deviceProfileLib, line 103
} // library marker kkossev.deviceProfileLib, line 104
} // library marker kkossev.deviceProfileLib, line 105
return activeProfiles // library marker kkossev.deviceProfileLib, line 106
} // library marker kkossev.deviceProfileLib, line 107
// ---------------------------------- deviceProfilesV3 helper functions -------------------------------------------- // library marker kkossev.deviceProfileLib, line 109
/** // library marker kkossev.deviceProfileLib, line 111
* Returns the profile key for a given profile description. // library marker kkossev.deviceProfileLib, line 112
* @param valueStr The profile description to search for. // library marker kkossev.deviceProfileLib, line 113
* @return The profile key if found, otherwise null. // library marker kkossev.deviceProfileLib, line 114
*/ // library marker kkossev.deviceProfileLib, line 115
public String getProfileKey(final String valueStr) { // library marker kkossev.deviceProfileLib, line 116
if (deviceProfilesV3 != null) { return deviceProfilesV3.find { _, profileMap -> profileMap.description == valueStr }?.key } // library marker kkossev.deviceProfileLib, line 117
else if (deviceProfilesV2 != null) { return deviceProfilesV2.find { _, profileMap -> profileMap.description == valueStr }?.key } // library marker kkossev.deviceProfileLib, line 118
else { return null } // library marker kkossev.deviceProfileLib, line 119
} // library marker kkossev.deviceProfileLib, line 120
/** // library marker kkossev.deviceProfileLib, line 122
* Finds the preferences map for the given parameter. // library marker kkossev.deviceProfileLib, line 123
* @param param The parameter to find the preferences map for. // library marker kkossev.deviceProfileLib, line 124
* @param debug Whether or not to output debug logs. // library marker kkossev.deviceProfileLib, line 125
* @return returns either tuyaDPs or attributes map, depending on where the preference (param) is found // library marker kkossev.deviceProfileLib, line 126
* @return empty map [:] if param is not defined for this device. // library marker kkossev.deviceProfileLib, line 127
*/ // library marker kkossev.deviceProfileLib, line 128
private Map getPreferencesMapByName(final String param, boolean debug=false) { // library marker kkossev.deviceProfileLib, line 129
Map foundMap = [:] // library marker kkossev.deviceProfileLib, line 130
if (!(param in DEVICE?.preferences)) { if (debug) { log.warn "getPreferencesMapByName: preference ${param} not defined for this device!" } ; return [:] } // library marker kkossev.deviceProfileLib, line 131
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 132
def preference // library marker kkossev.deviceProfileLib, line 133
try { // library marker kkossev.deviceProfileLib, line 134
preference = DEVICE?.preferences["$param"] // library marker kkossev.deviceProfileLib, line 135
if (debug) { log.debug "getPreferencesMapByName: preference ${param} found. value is ${preference}" } // library marker kkossev.deviceProfileLib, line 136
if (preference in [true, false]) { // library marker kkossev.deviceProfileLib, line 137
// find the preference in the tuyaDPs map // library marker kkossev.deviceProfileLib, line 138
logDebug "getPreferencesMapByName: preference ${param} is boolean" // library marker kkossev.deviceProfileLib, line 139
return [:] // no maps for predefined preferences ! // library marker kkossev.deviceProfileLib, line 140
} // library marker kkossev.deviceProfileLib, line 141
if (safeToInt(preference, -1) > 0) { //if (preference instanceof Number) { // library marker kkossev.deviceProfileLib, line 142
int dp = safeToInt(preference) // library marker kkossev.deviceProfileLib, line 143
//if (debug) log.trace "getPreferencesMapByName: param ${param} preference ${preference} is number (${dp})" // library marker kkossev.deviceProfileLib, line 144
foundMap = DEVICE?.tuyaDPs.find { it.dp == dp } // library marker kkossev.deviceProfileLib, line 145
} // library marker kkossev.deviceProfileLib, line 146
else { // cluster:attribute // library marker kkossev.deviceProfileLib, line 147
//if (debug) { log.trace "${DEVICE?.attributes}" } // library marker kkossev.deviceProfileLib, line 148
foundMap = DEVICE?.attributes.find { it.at == preference } // library marker kkossev.deviceProfileLib, line 149
} // library marker kkossev.deviceProfileLib, line 150
// TODO - could be also 'true' or 'false' ... // library marker kkossev.deviceProfileLib, line 151
} catch (e) { // library marker kkossev.deviceProfileLib, line 152
if (debug) { log.warn "getPreferencesMapByName: exception ${e} caught when getting preference ${param} !" } // library marker kkossev.deviceProfileLib, line 153
return [:] // library marker kkossev.deviceProfileLib, line 154
} // library marker kkossev.deviceProfileLib, line 155
if (debug) { log.debug "getPreferencesMapByName: foundMap = ${foundMap}" } // library marker kkossev.deviceProfileLib, line 156
return foundMap // library marker kkossev.deviceProfileLib, line 157
} // library marker kkossev.deviceProfileLib, line 158
public Map getAttributesMap(String attribName, boolean debug=false) { // library marker kkossev.deviceProfileLib, line 160
Map foundMap = [:] // library marker kkossev.deviceProfileLib, line 161
List'], // library marker kkossev.deviceProfileLib, line 203
if (parMap?.defVal == null) { logDebug "no default value for preference ${parName} !" ; return } // continue // library marker kkossev.deviceProfileLib, line 204
if (debug) { log.info "setting par ${parMap.name} defVal = ${parMap.defVal} (type:${parMap.type})" } // library marker kkossev.deviceProfileLib, line 205
String str = parMap.name // library marker kkossev.deviceProfileLib, line 206
device.updateSetting("$str", [value:parMap.defVal as String, type:parMap.type]) // library marker kkossev.deviceProfileLib, line 207
} // library marker kkossev.deviceProfileLib, line 208
logInfo 'Preferences reset to default values' // library marker kkossev.deviceProfileLib, line 209
} // library marker kkossev.deviceProfileLib, line 210
/** // library marker kkossev.deviceProfileLib, line 212
* Returns a list of valid parameters per model based on the device preferences. // library marker kkossev.deviceProfileLib, line 213
* // library marker kkossev.deviceProfileLib, line 214
* @return List of valid parameters. // library marker kkossev.deviceProfileLib, line 215
*/ // library marker kkossev.deviceProfileLib, line 216
private List getValidParsPerModel() { // library marker kkossev.deviceProfileLib, line 217
List validPars = [] // library marker kkossev.deviceProfileLib, line 218
if (DEVICE?.preferences != null && DEVICE?.preferences != [:]) { // library marker kkossev.deviceProfileLib, line 219
// use the preferences to validate the parameters // library marker kkossev.deviceProfileLib, line 220
validPars = DEVICE?.preferences.keySet().toList() // library marker kkossev.deviceProfileLib, line 221
} // library marker kkossev.deviceProfileLib, line 222
return validPars // library marker kkossev.deviceProfileLib, line 223
} // library marker kkossev.deviceProfileLib, line 224
/* groovylint-disable-next-line MethodReturnTypeRequired, NoDef */ // library marker kkossev.deviceProfileLib, line 226
private def getScaledPreferenceValue(String preference, Map dpMap) { // TODO - not used ??? // library marker kkossev.deviceProfileLib, line 227
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 228
def value = settings."${preference}" // library marker kkossev.deviceProfileLib, line 229
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 230
def scaledValue // library marker kkossev.deviceProfileLib, line 231
if (value == null) { // library marker kkossev.deviceProfileLib, line 232
logDebug "getScaledPreferenceValue: preference ${preference} not found!" // library marker kkossev.deviceProfileLib, line 233
return null // library marker kkossev.deviceProfileLib, line 234
} // library marker kkossev.deviceProfileLib, line 235
switch (dpMap.type) { // library marker kkossev.deviceProfileLib, line 236
case 'number' : // library marker kkossev.deviceProfileLib, line 237
scaledValue = safeToInt(value) // library marker kkossev.deviceProfileLib, line 238
break // library marker kkossev.deviceProfileLib, line 239
case 'decimal' : // library marker kkossev.deviceProfileLib, line 240
scaledValue = safeToDouble(value) // library marker kkossev.deviceProfileLib, line 241
if (dpMap.scale != null && dpMap.scale != 1) { // library marker kkossev.deviceProfileLib, line 242
scaledValue = Math.round(scaledValue * dpMap.scale) // library marker kkossev.deviceProfileLib, line 243
} // library marker kkossev.deviceProfileLib, line 244
break // library marker kkossev.deviceProfileLib, line 245
case 'bool' : // library marker kkossev.deviceProfileLib, line 246
scaledValue = value == 'true' ? 1 : 0 // library marker kkossev.deviceProfileLib, line 247
break // library marker kkossev.deviceProfileLib, line 248
case 'enum' : // library marker kkossev.deviceProfileLib, line 249
//logWarn "getScaledPreferenceValue: ENUM preference ${preference} type:${dpMap.type} value = ${value} dpMap.scale=${dpMap.scale}" // library marker kkossev.deviceProfileLib, line 250
if (dpMap.map == null) { // library marker kkossev.deviceProfileLib, line 251
logDebug "getScaledPreferenceValue: preference ${preference} has no map defined!" // library marker kkossev.deviceProfileLib, line 252
return null // library marker kkossev.deviceProfileLib, line 253
} // library marker kkossev.deviceProfileLib, line 254
scaledValue = value // library marker kkossev.deviceProfileLib, line 255
if (dpMap.scale != null && safeToInt(dpMap.scale) != 1) { // library marker kkossev.deviceProfileLib, line 256
scaledValue = Math.round(safeToDouble(scaledValue ) * safeToInt(dpMap.scale)) // library marker kkossev.deviceProfileLib, line 257
} // library marker kkossev.deviceProfileLib, line 258
break // library marker kkossev.deviceProfileLib, line 259
default : // library marker kkossev.deviceProfileLib, line 260
logDebug "getScaledPreferenceValue: preference ${preference} has unsupported type ${dpMap.type}!" // library marker kkossev.deviceProfileLib, line 261
return null // library marker kkossev.deviceProfileLib, line 262
} // library marker kkossev.deviceProfileLib, line 263
//logDebug "getScaledPreferenceValue: preference ${preference} value = ${value} scaledValue = ${scaledValue} (scale=${dpMap.scale})" // library marker kkossev.deviceProfileLib, line 264
return scaledValue // library marker kkossev.deviceProfileLib, line 265
} // library marker kkossev.deviceProfileLib, line 266
// called from customUpdated() method in the custom driver // library marker kkossev.deviceProfileLib, line 268
// TODO !!!!!!!!!! - refactor it !!! IAS settings do not use Tuya DPs !!! // library marker kkossev.deviceProfileLib, line 269
public void updateAllPreferences() { // library marker kkossev.deviceProfileLib, line 270
logDebug "updateAllPreferences: preferences=${DEVICE?.preferences}" // library marker kkossev.deviceProfileLib, line 271
if (DEVICE?.preferences == null || DEVICE?.preferences == [:]) { // library marker kkossev.deviceProfileLib, line 272
logDebug "updateAllPreferences: no preferences defined for device profile ${getDeviceProfile()}" // library marker kkossev.deviceProfileLib, line 273
return // library marker kkossev.deviceProfileLib, line 274
} // library marker kkossev.deviceProfileLib, line 275
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 276
def preferenceValue // int or String for enums // library marker kkossev.deviceProfileLib, line 277
// itterate over the preferences map and update the device settings // library marker kkossev.deviceProfileLib, line 278
(DEVICE?.preferences).each { name, dp -> // library marker kkossev.deviceProfileLib, line 279
Map foundMap = getPreferencesMapByName(name, false) // library marker kkossev.deviceProfileLib, line 280
logDebug "updateAllPreferences: foundMap = ${foundMap}" // library marker kkossev.deviceProfileLib, line 281
if (foundMap != null && foundMap != [:]) { // library marker kkossev.deviceProfileLib, line 282
// preferenceValue = getScaledPreferenceValue(name, foundMap) // library marker kkossev.deviceProfileLib, line 283
preferenceValue = settings."${name}" // library marker kkossev.deviceProfileLib, line 284
logTrace"preferenceValue = ${preferenceValue}" // library marker kkossev.deviceProfileLib, line 285
if (foundMap.type == 'enum' && foundMap.scale != null && foundMap.scale != 1 && foundMap.scale != 0) { // library marker kkossev.deviceProfileLib, line 286
// scale the value // library marker kkossev.deviceProfileLib, line 287
preferenceValue = (safeToDouble(preferenceValue) / safeToInt(foundMap.scale)) as double // library marker kkossev.deviceProfileLib, line 288
} // library marker kkossev.deviceProfileLib, line 289
if (preferenceValue != null) { // library marker kkossev.deviceProfileLib, line 290
setPar(name, preferenceValue.toString()) // library marker kkossev.deviceProfileLib, line 291
} // library marker kkossev.deviceProfileLib, line 292
else { logDebug "updateAllPreferences: preference ${name} is not set (preferenceValue was null)" ; return } // library marker kkossev.deviceProfileLib, line 293
} // library marker kkossev.deviceProfileLib, line 294
else { logDebug "warning: couldn't find map for preference ${name}" ; return } // TODO - supress the warning if the preference was boolean true/false // library marker kkossev.deviceProfileLib, line 295
} // library marker kkossev.deviceProfileLib, line 296
return // library marker kkossev.deviceProfileLib, line 297
} // library marker kkossev.deviceProfileLib, line 298
/* groovylint-disable-next-line MethodReturnTypeRequired, NoDef */ // library marker kkossev.deviceProfileLib, line 300
def divideBy100(int val) { return (val as int) / 100 } // library marker kkossev.deviceProfileLib, line 301
int multiplyBy100(int val) { return (val as int) * 100 } // library marker kkossev.deviceProfileLib, line 302
int divideBy10(int val) { // library marker kkossev.deviceProfileLib, line 303
if (val > 10) { return (val as int) / 10 } // library marker kkossev.deviceProfileLib, line 304
else { return (val as int) } // library marker kkossev.deviceProfileLib, line 305
} // library marker kkossev.deviceProfileLib, line 306
int multiplyBy10(int val) { return (val as int) * 10 } // library marker kkossev.deviceProfileLib, line 307
int divideBy1(int val) { return (val as int) / 1 } //tests // library marker kkossev.deviceProfileLib, line 308
int signedInt(int val) { // library marker kkossev.deviceProfileLib, line 309
if (val > 127) { return (val as int) - 256 } // library marker kkossev.deviceProfileLib, line 310
else { return (val as int) } // library marker kkossev.deviceProfileLib, line 311
} // library marker kkossev.deviceProfileLib, line 312
int invert(int val) { // library marker kkossev.deviceProfileLib, line 313
if (settings.invertMotion == true) { return val == 0 ? 1 : 0 } // library marker kkossev.deviceProfileLib, line 314
else { return val } // library marker kkossev.deviceProfileLib, line 315
} // library marker kkossev.deviceProfileLib, line 316
// called from setPar and sendAttribite methods for non-Tuya DPs // library marker kkossev.deviceProfileLib, line 318
private List zclWriteAttribute(Map attributesMap, int scaledValue) { // library marker kkossev.deviceProfileLib, line 319
if (attributesMap == null || attributesMap == [:]) { logWarn "attributesMap=${attributesMap}" ; return [] } // library marker kkossev.deviceProfileLib, line 320
List cmds = [] // library marker kkossev.deviceProfileLib, line 321
Map map = [:] // library marker kkossev.deviceProfileLib, line 322
// cluster:attribute // library marker kkossev.deviceProfileLib, line 323
try { // library marker kkossev.deviceProfileLib, line 324
map['cluster'] = hubitat.helper.HexUtils.hexStringToInt((attributesMap.at).split(':')[0]) as Integer // library marker kkossev.deviceProfileLib, line 325
map['attribute'] = hubitat.helper.HexUtils.hexStringToInt((attributesMap.at).split(':')[1]) as Integer // library marker kkossev.deviceProfileLib, line 326
map['dt'] = (attributesMap.dt != null && attributesMap.dt != '') ? hubitat.helper.HexUtils.hexStringToInt(attributesMap.dt) as Integer : null // library marker kkossev.deviceProfileLib, line 327
map['mfgCode'] = attributesMap.mfgCode ? attributesMap.mfgCode as String : null // library marker kkossev.deviceProfileLib, line 328
} // library marker kkossev.deviceProfileLib, line 329
catch (e) { logWarn "setPar: Exception caught while splitting cluser and attribute $customSetFunction($scaledValue) (val=${val})) : '${e}' " ; return [] } // library marker kkossev.deviceProfileLib, line 330
// dt (data type) is obligatory when writing to a cluster... // library marker kkossev.deviceProfileLib, line 331
if (attributesMap.rw != null && attributesMap.rw == 'rw' && map.dt == null) { // library marker kkossev.deviceProfileLib, line 332
map.dt = attributesMap.type in ['number', 'decimal'] ? DataType.INT16 : DataType.ENUM8 // library marker kkossev.deviceProfileLib, line 333
logDebug "cluster:attribute ${attributesMap.at} is read-write, but no data type (dt) is defined! Assuming 0x${zigbee.convertToHexString(map.dt, 2)}" // library marker kkossev.deviceProfileLib, line 334
} // library marker kkossev.deviceProfileLib, line 335
if (map.mfgCode != null && map.mfgCode != '') { // library marker kkossev.deviceProfileLib, line 336
Map mfgCode = map.mfgCode != null ? ['mfgCode':map.mfgCode] : [:] // library marker kkossev.deviceProfileLib, line 337
cmds = zigbee.writeAttribute(map.cluster as int, map.attribute as int, map.dt as int, scaledValue, mfgCode, delay = 50) // library marker kkossev.deviceProfileLib, line 338
} // library marker kkossev.deviceProfileLib, line 339
else { // library marker kkossev.deviceProfileLib, line 340
cmds = zigbee.writeAttribute(map.cluster as int, map.attribute as int, map.dt as int, scaledValue, [:], delay = 50) // library marker kkossev.deviceProfileLib, line 341
} // library marker kkossev.deviceProfileLib, line 342
return cmds // library marker kkossev.deviceProfileLib, line 343
} // library marker kkossev.deviceProfileLib, line 344
/** // library marker kkossev.deviceProfileLib, line 346
* Called from setPar() method only! // library marker kkossev.deviceProfileLib, line 347
* Validates the parameter value based on the given dpMap type and scales it if needed. // library marker kkossev.deviceProfileLib, line 348
* // library marker kkossev.deviceProfileLib, line 349
* @param dpMap The map containing the parameter type, minimum and maximum values. // library marker kkossev.deviceProfileLib, line 350
* @param val The value to be validated and scaled. // library marker kkossev.deviceProfileLib, line 351
* @return The validated and scaled value if it is within the specified range, null otherwise. // library marker kkossev.deviceProfileLib, line 352
*/ // library marker kkossev.deviceProfileLib, line 353
/* groovylint-disable-next-line MethodReturnTypeRequired, NoDef */ // library marker kkossev.deviceProfileLib, line 354
private def validateAndScaleParameterValue(Map dpMap, String val) { // library marker kkossev.deviceProfileLib, line 355
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 356
def value // validated value - integer, floar // library marker kkossev.deviceProfileLib, line 357
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 358
def scaledValue // // library marker kkossev.deviceProfileLib, line 359
//logDebug "validateAndScaleParameterValue: dpMap=${dpMap} val=${val}" // library marker kkossev.deviceProfileLib, line 360
switch (dpMap.type) { // library marker kkossev.deviceProfileLib, line 361
case 'number' : // library marker kkossev.deviceProfileLib, line 362
// TODO - negative values ! // library marker kkossev.deviceProfileLib, line 363
// TODO - better conversion to integer! // library marker kkossev.deviceProfileLib, line 364
value = safeToInt(val, 0) // library marker kkossev.deviceProfileLib, line 365
//scaledValue = value // library marker kkossev.deviceProfileLib, line 366
// scale the value - added 10/26/2023 also for integer values ! // library marker kkossev.deviceProfileLib, line 367
if (dpMap.scale != null) { // library marker kkossev.deviceProfileLib, line 368
scaledValue = (value * dpMap.scale) as Integer // library marker kkossev.deviceProfileLib, line 369
} // library marker kkossev.deviceProfileLib, line 370
else { // library marker kkossev.deviceProfileLib, line 371
scaledValue = value // library marker kkossev.deviceProfileLib, line 372
} // library marker kkossev.deviceProfileLib, line 373
break // library marker kkossev.deviceProfileLib, line 374
case 'decimal' : // library marker kkossev.deviceProfileLib, line 376
value = safeToDouble(val, 0.0) // library marker kkossev.deviceProfileLib, line 377
// scale the value // library marker kkossev.deviceProfileLib, line 378
if (dpMap.scale != null) { // library marker kkossev.deviceProfileLib, line 379
scaledValue = (value * dpMap.scale) as Integer // library marker kkossev.deviceProfileLib, line 380
} // library marker kkossev.deviceProfileLib, line 381
else { // library marker kkossev.deviceProfileLib, line 382
scaledValue = value // library marker kkossev.deviceProfileLib, line 383
} // library marker kkossev.deviceProfileLib, line 384
break // library marker kkossev.deviceProfileLib, line 385
case 'bool' : // library marker kkossev.deviceProfileLib, line 387
if (val == '0' || val == 'false') { value = scaledValue = 0 } // library marker kkossev.deviceProfileLib, line 388
else if (val == '1' || val == 'true') { value = scaledValue = 1 } // library marker kkossev.deviceProfileLib, line 389
else { // library marker kkossev.deviceProfileLib, line 390
logInfo "bool parameter ${val}. value must be one of 0 1 false true" // library marker kkossev.deviceProfileLib, line 391
return null // library marker kkossev.deviceProfileLib, line 392
} // library marker kkossev.deviceProfileLib, line 393
break // library marker kkossev.deviceProfileLib, line 394
case 'enum' : // library marker kkossev.deviceProfileLib, line 395
// enums are always integer values // library marker kkossev.deviceProfileLib, line 396
// check if the scaling is different than 1 in dpMap // library marker kkossev.deviceProfileLib, line 397
logTrace "validateAndScaleParameterValue: enum parameter ${val}. dpMap=${dpMap}" // library marker kkossev.deviceProfileLib, line 398
Integer scale = safeToInt(dpMap.scale) // library marker kkossev.deviceProfileLib, line 399
if (scale != null && scale != 0 && scale != 1) { // library marker kkossev.deviceProfileLib, line 400
// we have a float parameter input - convert it to int // library marker kkossev.deviceProfileLib, line 401
value = safeToDouble(val, -1.0) // library marker kkossev.deviceProfileLib, line 402
scaledValue = (value * safeToInt(dpMap.scale)) as Integer // library marker kkossev.deviceProfileLib, line 403
} // library marker kkossev.deviceProfileLib, line 404
else { // library marker kkossev.deviceProfileLib, line 405
value = scaledValue = safeToInt(val, -1) // library marker kkossev.deviceProfileLib, line 406
} // library marker kkossev.deviceProfileLib, line 407
if (scaledValue == null || scaledValue < 0) { // library marker kkossev.deviceProfileLib, line 408
// get the keys of dpMap.map as a List // library marker kkossev.deviceProfileLib, line 409
//List keys = dpMap.map.keySet().toList() // library marker kkossev.deviceProfileLib, line 410
//logDebug "${device.displayName} validateAndScaleParameterValue: enum parameter ${val}. value must be one of ${keys}" // library marker kkossev.deviceProfileLib, line 411
// find the key for the value // library marker kkossev.deviceProfileLib, line 412
String key = dpMap.map.find { it.value == val }?.key // library marker kkossev.deviceProfileLib, line 413
logTrace "validateAndScaleParameterValue: enum parameter ${val}. key=${key}" // library marker kkossev.deviceProfileLib, line 414
if (key == null) { // library marker kkossev.deviceProfileLib, line 415
logInfo "invalid enum parameter ${val}. value must be one of ${dpMap.map}" // library marker kkossev.deviceProfileLib, line 416
return null // library marker kkossev.deviceProfileLib, line 417
} // library marker kkossev.deviceProfileLib, line 418
value = scaledValue = key as Integer // library marker kkossev.deviceProfileLib, line 419
//return null // library marker kkossev.deviceProfileLib, line 420
} // library marker kkossev.deviceProfileLib, line 421
break // library marker kkossev.deviceProfileLib, line 422
default : // library marker kkossev.deviceProfileLib, line 423
logWarn "validateAndScaleParameterValue: unsupported dpMap type ${parType}" // library marker kkossev.deviceProfileLib, line 424
return null // library marker kkossev.deviceProfileLib, line 425
} // library marker kkossev.deviceProfileLib, line 426
//logTrace "validateAndScaleParameterValue before checking scaledValue=${scaledValue}" // library marker kkossev.deviceProfileLib, line 427
// check if the value is within the specified range // library marker kkossev.deviceProfileLib, line 428
if ((dpMap.min != null && value < dpMap.min) || (dpMap.max != null && value > dpMap.max)) { // library marker kkossev.deviceProfileLib, line 429
logWarn "${device.displayName} validateAndScaleParameterValue: invalid ${dpMap.name} parameter value ${value} (scaled ${scaledValue}). Value must be within ${dpMap.min} and ${dpMap.max}" // library marker kkossev.deviceProfileLib, line 430
return null // library marker kkossev.deviceProfileLib, line 431
} // library marker kkossev.deviceProfileLib, line 432
//logTrace "validateAndScaleParameterValue returning scaledValue=${scaledValue}" // library marker kkossev.deviceProfileLib, line 433
return scaledValue // library marker kkossev.deviceProfileLib, line 434
} // library marker kkossev.deviceProfileLib, line 435
/** // library marker kkossev.deviceProfileLib, line 437
* Sets the value of a parameter for a device. // library marker kkossev.deviceProfileLib, line 438
* // library marker kkossev.deviceProfileLib, line 439
* @param par The parameter name. // library marker kkossev.deviceProfileLib, line 440
* @param val The parameter value. // library marker kkossev.deviceProfileLib, line 441
* @return true if the parameter was successfully set, false otherwise. // library marker kkossev.deviceProfileLib, line 442
*/ // library marker kkossev.deviceProfileLib, line 443
public boolean setPar(final String parPar=null, final String val=null ) { // library marker kkossev.deviceProfileLib, line 444
List cmds = [] // library marker kkossev.deviceProfileLib, line 445
//Boolean validated = false // library marker kkossev.deviceProfileLib, line 446
logDebug "setPar(${parPar}, ${val})" // library marker kkossev.deviceProfileLib, line 447
if (DEVICE?.preferences == null || DEVICE?.preferences == [:]) { return false } // library marker kkossev.deviceProfileLib, line 448
if (parPar == null /*|| !(par in getValidParsPerModel())*/) { logInfo "setPar: 'parameter' must be one of these : ${getValidParsPerModel()}"; return false } // library marker kkossev.deviceProfileLib, line 449
String par = parPar.trim() // library marker kkossev.deviceProfileLib, line 450
Map dpMap = getPreferencesMapByName(par, false) // get the map for the parameter // library marker kkossev.deviceProfileLib, line 451
if ( dpMap == null || dpMap == [:]) { logInfo "setPar: tuyaDPs map not found for parameter ${par}"; return false } // library marker kkossev.deviceProfileLib, line 452
if (val == null) { logInfo "setPar: 'value' must be specified for parameter ${par} in the range ${dpMap.min} to ${dpMap.max}"; return false } // library marker kkossev.deviceProfileLib, line 453
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 454
def scaledValue = validateAndScaleParameterValue(dpMap, val as String) // convert the val to the correct type and scale it if needed // library marker kkossev.deviceProfileLib, line 455
if (scaledValue == null) { // library marker kkossev.deviceProfileLib, line 456
log.trace "$dpMap ${dpMap.map}" // library marker kkossev.deviceProfileLib, line 457
String helpTxt = "setPar: invalid parameter ${par} value ${val}." // library marker kkossev.deviceProfileLib, line 458
if (dpMap.min != null && dpMap.max != null) { helpTxt += " Must be in the range ${dpMap.min} to ${dpMap.max}" } // library marker kkossev.deviceProfileLib, line 459
if (dpMap.map != null) { helpTxt += " Must be one of ${dpMap.map}" } // library marker kkossev.deviceProfileLib, line 460
logInfo helpTxt // library marker kkossev.deviceProfileLib, line 461
return false // library marker kkossev.deviceProfileLib, line 462
} // library marker kkossev.deviceProfileLib, line 463
// if there is a dedicated set function, use it // library marker kkossev.deviceProfileLib, line 465
String capitalizedFirstChar = par[0].toUpperCase() + par[1..-1] // library marker kkossev.deviceProfileLib, line 466
String customSetFunction = "customSet${capitalizedFirstChar}" // library marker kkossev.deviceProfileLib, line 467
if (this.respondsTo(customSetFunction)) { // library marker kkossev.deviceProfileLib, line 468
logDebug "setPar: found customSetFunction=${setFunction}, scaledValue=${scaledValue} (val=${val})" // library marker kkossev.deviceProfileLib, line 469
// execute the customSetFunction // library marker kkossev.deviceProfileLib, line 470
try { cmds = "$customSetFunction"(scaledValue) } // library marker kkossev.deviceProfileLib, line 471
catch (e) { logWarn "setPar: Exception caught while processing $customSetFunction($scaledValue) (val=${val})) : '${e}'" ; return false } // library marker kkossev.deviceProfileLib, line 472
logDebug "customSetFunction result is ${cmds}" // library marker kkossev.deviceProfileLib, line 473
if (cmds != null && cmds != []) { // library marker kkossev.deviceProfileLib, line 474
logInfo "setPar: (1) successfluly executed setPar $customSetFunction($scaledValue)" // library marker kkossev.deviceProfileLib, line 475
sendZigbeeCommands( cmds ) // library marker kkossev.deviceProfileLib, line 476
return true // library marker kkossev.deviceProfileLib, line 477
} // library marker kkossev.deviceProfileLib, line 478
else { // library marker kkossev.deviceProfileLib, line 479
logWarn "setPar: customSetFunction $customSetFunction($scaledValue) returned null or empty list" // library marker kkossev.deviceProfileLib, line 480
// continue with the default processing // library marker kkossev.deviceProfileLib, line 481
} // library marker kkossev.deviceProfileLib, line 482
} // library marker kkossev.deviceProfileLib, line 483
if (isVirtual()) { // library marker kkossev.deviceProfileLib, line 484
// set a virtual attribute // library marker kkossev.deviceProfileLib, line 485
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 486
def valMiscType // library marker kkossev.deviceProfileLib, line 487
logDebug "setPar: found virtual attribute ${par} value ${val}" // library marker kkossev.deviceProfileLib, line 488
if (dpMap.type == 'enum') { // library marker kkossev.deviceProfileLib, line 489
// find the key for the value // library marker kkossev.deviceProfileLib, line 490
String key = dpMap.map.find { it.value == val }?.key // library marker kkossev.deviceProfileLib, line 491
logTrace "setPar: enum parameter ${val}. key=${key}" // library marker kkossev.deviceProfileLib, line 492
if (key == null) { // library marker kkossev.deviceProfileLib, line 493
logInfo "setPar: invalid virtual enum parameter ${val}. value must be one of ${dpMap.map}" // library marker kkossev.deviceProfileLib, line 494
return false // library marker kkossev.deviceProfileLib, line 495
} // library marker kkossev.deviceProfileLib, line 496
valMiscType = dpMap.map[key as int] // library marker kkossev.deviceProfileLib, line 497
logTrace "setPar: enum parameter ${val}. key=${key} valMiscType=${valMiscType} dpMap.map=${dpMap.map}" // library marker kkossev.deviceProfileLib, line 498
device.updateSetting("$par", [value:key as String, type:dpMap.type]) // library marker kkossev.deviceProfileLib, line 499
} // library marker kkossev.deviceProfileLib, line 500
else { // library marker kkossev.deviceProfileLib, line 501
valMiscType = val // library marker kkossev.deviceProfileLib, line 502
device.updateSetting("$par", [value:valMiscType, type:dpMap.type]) // library marker kkossev.deviceProfileLib, line 503
} // library marker kkossev.deviceProfileLib, line 504
String descriptionText = "${par} set to ${valMiscType}${dpMap.unit ?: ''} [virtual]" // library marker kkossev.deviceProfileLib, line 505
sendEvent(name:par, value:valMiscType, unit:dpMap.unit ?: '', isDigital: true) // library marker kkossev.deviceProfileLib, line 506
logInfo descriptionText // library marker kkossev.deviceProfileLib, line 507
return true // library marker kkossev.deviceProfileLib, line 508
} // library marker kkossev.deviceProfileLib, line 509
// check whether this is a tuya DP or a cluster:attribute parameter // library marker kkossev.deviceProfileLib, line 511
boolean isTuyaDP // library marker kkossev.deviceProfileLib, line 512
/* groovylint-disable-next-line Instanceof */ // library marker kkossev.deviceProfileLib, line 514
try { isTuyaDP = dpMap.dp instanceof Number } // library marker kkossev.deviceProfileLib, line 515
catch (e) { logWarn"setPar: (1) exception ${e} caught while checking isNumber() preference ${preference}" ; isTuyaDP = false } // library marker kkossev.deviceProfileLib, line 516
if (dpMap.dp != null && isTuyaDP) { // library marker kkossev.deviceProfileLib, line 517
// Tuya DP // library marker kkossev.deviceProfileLib, line 518
cmds = sendTuyaParameter(dpMap, par, scaledValue) // library marker kkossev.deviceProfileLib, line 519
if (cmds == null || cmds == []) { // library marker kkossev.deviceProfileLib, line 520
logWarn "setPar: sendTuyaParameter par ${par} scaledValue ${scaledValue} returned null or empty list" // library marker kkossev.deviceProfileLib, line 521
return false // library marker kkossev.deviceProfileLib, line 522
} // library marker kkossev.deviceProfileLib, line 523
else { // library marker kkossev.deviceProfileLib, line 524
logInfo "setPar: (2) sending parameter $par ($val (scaledValue=${scaledValue}))" // library marker kkossev.deviceProfileLib, line 525
sendZigbeeCommands(cmds) // library marker kkossev.deviceProfileLib, line 526
return false // library marker kkossev.deviceProfileLib, line 527
} // library marker kkossev.deviceProfileLib, line 528
} // library marker kkossev.deviceProfileLib, line 529
else if (dpMap.at != null) { // library marker kkossev.deviceProfileLib, line 530
// cluster:attribute // library marker kkossev.deviceProfileLib, line 531
logDebug "setPar: found at=${dpMap.at} dt=${dpMap.dt} mfgCode=${dpMap.mfgCode} scaledValue=${scaledValue} (val=${val})" // library marker kkossev.deviceProfileLib, line 532
int signedIntScaled = convertSignedInts(scaledValue, dpMap) // library marker kkossev.deviceProfileLib, line 533
cmds = zclWriteAttribute(dpMap, signedIntScaled) // library marker kkossev.deviceProfileLib, line 534
if (cmds == null || cmds == []) { // library marker kkossev.deviceProfileLib, line 535
logWarn "setPar: failed to write cluster:attribute ${dpMap.at} value ${scaledValue}" // library marker kkossev.deviceProfileLib, line 536
return false // library marker kkossev.deviceProfileLib, line 537
} // library marker kkossev.deviceProfileLib, line 538
} // library marker kkossev.deviceProfileLib, line 539
else { logWarn "setPar: invalid dp or at value ${dpMap.dp} for parameter ${par}" ; return false } // library marker kkossev.deviceProfileLib, line 540
logInfo "setPar: (3) successfluly executed setPar $customSetFunction($scaledValue)" // library marker kkossev.deviceProfileLib, line 541
sendZigbeeCommands( cmds ) // library marker kkossev.deviceProfileLib, line 542
return true // library marker kkossev.deviceProfileLib, line 543
} // library marker kkossev.deviceProfileLib, line 544
// function to send a Tuya command to data point taken from dpMap with value tuyaValue and type taken from dpMap // library marker kkossev.deviceProfileLib, line 546
// TODO - reuse it !!! // library marker kkossev.deviceProfileLib, line 547
/* groovylint-disable-next-line MethodParameterTypeRequired, NoDef */ // library marker kkossev.deviceProfileLib, line 548
public List sendTuyaParameter( Map dpMap, String par, tuyaValue) { // library marker kkossev.deviceProfileLib, line 549
//logDebug "sendTuyaParameter: trying to send parameter ${par} value ${tuyaValue}" // library marker kkossev.deviceProfileLib, line 550
List cmds = [] // library marker kkossev.deviceProfileLib, line 551
if (dpMap == null) { logWarn "sendTuyaParameter: tuyaDPs map not found for parameter ${par}" ; return [] } // library marker kkossev.deviceProfileLib, line 552
String dp = zigbee.convertToHexString(dpMap.dp, 2) // library marker kkossev.deviceProfileLib, line 553
if (dpMap.dp <= 0 || dpMap.dp >= 256) { // library marker kkossev.deviceProfileLib, line 554
logWarn "sendTuyaParameter: invalid dp ${dpMap.dp} for parameter ${par}" // library marker kkossev.deviceProfileLib, line 555
return [] // library marker kkossev.deviceProfileLib, line 556
} // library marker kkossev.deviceProfileLib, line 557
String dpType // library marker kkossev.deviceProfileLib, line 558
if (dpMap.dt == null) { // library marker kkossev.deviceProfileLib, line 559
dpType = dpMap.type == 'bool' ? DP_TYPE_BOOL : dpMap.type == 'enum' ? DP_TYPE_ENUM : (dpMap.type in ['value', 'number', 'decimal']) ? DP_TYPE_VALUE : null // library marker kkossev.deviceProfileLib, line 560
} // library marker kkossev.deviceProfileLib, line 561
else { // library marker kkossev.deviceProfileLib, line 562
dpType = dpMap.dt // "01" - bool, "02" - enum, "03" - value // library marker kkossev.deviceProfileLib, line 563
} // library marker kkossev.deviceProfileLib, line 564
if (dpType == null) { // library marker kkossev.deviceProfileLib, line 565
logWarn "sendTuyaParameter: invalid dpType ${dpMap.type} for parameter ${par}" // library marker kkossev.deviceProfileLib, line 566
return [] // library marker kkossev.deviceProfileLib, line 567
} // library marker kkossev.deviceProfileLib, line 568
// sendTuyaCommand // library marker kkossev.deviceProfileLib, line 569
String dpValHex = dpType == DP_TYPE_VALUE ? zigbee.convertToHexString(tuyaValue as int, 8) : zigbee.convertToHexString(tuyaValue as int, 2) // library marker kkossev.deviceProfileLib, line 570
logDebug "sendTuyaParameter: sending parameter ${par} dpValHex ${dpValHex} (raw=${tuyaValue}) Tuya dp=${dp} dpType=${dpType} " // library marker kkossev.deviceProfileLib, line 571
if (dpMap.tuyaCmd != null ) { // library marker kkossev.deviceProfileLib, line 572
cmds = sendTuyaCommand( dp, dpType, dpValHex, dpMap.tuyaCmd as int) // library marker kkossev.deviceProfileLib, line 573
} // library marker kkossev.deviceProfileLib, line 574
else { // library marker kkossev.deviceProfileLib, line 575
cmds = sendTuyaCommand( dp, dpType, dpValHex) // library marker kkossev.deviceProfileLib, line 576
} // library marker kkossev.deviceProfileLib, line 577
return cmds // library marker kkossev.deviceProfileLib, line 578
} // library marker kkossev.deviceProfileLib, line 579
private int convertSignedInts(int val, Map dpMap) { // library marker kkossev.deviceProfileLib, line 581
if (dpMap.dt == '0x28') { // library marker kkossev.deviceProfileLib, line 582
if (val > 127) { return (val as int) - 256 } // library marker kkossev.deviceProfileLib, line 583
else { return (val as int) } // library marker kkossev.deviceProfileLib, line 584
} // library marker kkossev.deviceProfileLib, line 585
else if (dpMap.dt == '0x29') { // library marker kkossev.deviceProfileLib, line 586
if (val > 32767) { return (val as int) - 65536 } // library marker kkossev.deviceProfileLib, line 587
else { return (val as int) } // library marker kkossev.deviceProfileLib, line 588
} // library marker kkossev.deviceProfileLib, line 589
else { return (val as int) } // library marker kkossev.deviceProfileLib, line 590
} // library marker kkossev.deviceProfileLib, line 591
/* groovylint-disable-next-line MethodParameterTypeRequired, NoDef */ // library marker kkossev.deviceProfileLib, line 593
public boolean sendAttribute(String par=null, val=null ) { // library marker kkossev.deviceProfileLib, line 594
List cmds = [] // library marker kkossev.deviceProfileLib, line 595
//Boolean validated = false // library marker kkossev.deviceProfileLib, line 596
logDebug "sendAttribute(${par}, ${val})" // library marker kkossev.deviceProfileLib, line 597
if (par == null || DEVICE?.preferences == null || DEVICE?.preferences == [:]) { logDebug 'DEVICE.preferences is empty!' ; return false } // library marker kkossev.deviceProfileLib, line 598
Map dpMap = getAttributesMap(par, false) // get the map for the attribute // library marker kkossev.deviceProfileLib, line 600
l//log.trace "sendAttribute: dpMap=${dpMap}" // library marker kkossev.deviceProfileLib, line 601
if (dpMap == null || dpMap?.isEmpty()) { logWarn "sendAttribute: map not found for parameter ${par}"; return false } // library marker kkossev.deviceProfileLib, line 602
if (val == null) { logWarn "sendAttribute: 'value' must be specified for parameter ${par} in the range ${dpMap.min} to ${dpMap.max}"; return false } // library marker kkossev.deviceProfileLib, line 603
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 604
def scaledValue = validateAndScaleParameterValue(dpMap, val as String) // convert the val to the correct type and scale it if needed // library marker kkossev.deviceProfileLib, line 605
if (scaledValue == null) { logWarn "sendAttribute: invalid parameter value ${val}. Must be in the range ${dpMap.min} to ${dpMap.max}"; return false } // library marker kkossev.deviceProfileLib, line 606
logDebug "sendAttribute: parameter ${par} value ${val}, type ${dpMap.type} validated and scaled to ${scaledValue} type=${dpMap.type}" // library marker kkossev.deviceProfileLib, line 607
// if there is a dedicated set function, use it // library marker kkossev.deviceProfileLib, line 608
String capitalizedFirstChar = par[0].toUpperCase() + par[1..-1] // library marker kkossev.deviceProfileLib, line 609
String customSetFunction = "customSet${capitalizedFirstChar}" // library marker kkossev.deviceProfileLib, line 610
if (this.respondsTo(customSetFunction) /*&& !(customSetFunction in ["setHeatingSetpoint", "setCoolingSetpoint", "setThermostatMode"])*/) { // library marker kkossev.deviceProfileLib, line 611
logDebug "sendAttribute: found customSetFunction=${customSetFunction}, scaledValue=${scaledValue} (val=${val})" // library marker kkossev.deviceProfileLib, line 612
// execute the customSetFunction // library marker kkossev.deviceProfileLib, line 613
try { // library marker kkossev.deviceProfileLib, line 614
cmds = "$customSetFunction"(scaledValue) // library marker kkossev.deviceProfileLib, line 615
} // library marker kkossev.deviceProfileLib, line 616
catch (e) { // library marker kkossev.deviceProfileLib, line 617
logWarn "sendAttribute: Exception '${e}'caught while processing $customSetFunction($scaledValue) (val=${val}))" // library marker kkossev.deviceProfileLib, line 618
return false // library marker kkossev.deviceProfileLib, line 619
} // library marker kkossev.deviceProfileLib, line 620
logDebug "customSetFunction result is ${cmds}" // library marker kkossev.deviceProfileLib, line 621
if (cmds != null && cmds != []) { // library marker kkossev.deviceProfileLib, line 622
logDebug "sendAttribute: successfluly executed sendAttribute $customSetFunction($scaledValue)" // library marker kkossev.deviceProfileLib, line 623
sendZigbeeCommands( cmds ) // library marker kkossev.deviceProfileLib, line 624
return true // library marker kkossev.deviceProfileLib, line 625
} // library marker kkossev.deviceProfileLib, line 626
else { // library marker kkossev.deviceProfileLib, line 627
logWarn "sendAttribute: customSetFunction $customSetFunction($scaledValue) returned null or empty list, continue with the default processing" // library marker kkossev.deviceProfileLib, line 628
// continue with the default processing // library marker kkossev.deviceProfileLib, line 629
} // library marker kkossev.deviceProfileLib, line 630
} // library marker kkossev.deviceProfileLib, line 631
else { // library marker kkossev.deviceProfileLib, line 632
logDebug "sendAttribute: SKIPPED customSetFunction ${customSetFunction}, continue with the default processing" // library marker kkossev.deviceProfileLib, line 633
} // library marker kkossev.deviceProfileLib, line 634
// check whether this is a tuya DP or a cluster:attribute parameter or a virtual device // library marker kkossev.deviceProfileLib, line 635
if (isVirtual()) { // library marker kkossev.deviceProfileLib, line 636
// send a virtual attribute // library marker kkossev.deviceProfileLib, line 637
logDebug "sendAttribute: found virtual attribute ${par} value ${val}" // library marker kkossev.deviceProfileLib, line 638
// patch !! // library marker kkossev.deviceProfileLib, line 639
if (par == 'heatingSetpoint') { // library marker kkossev.deviceProfileLib, line 640
sendHeatingSetpointEvent(val) // library marker kkossev.deviceProfileLib, line 641
} // library marker kkossev.deviceProfileLib, line 642
else { // library marker kkossev.deviceProfileLib, line 643
String descriptionText = "${par} is ${val} [virtual]" // library marker kkossev.deviceProfileLib, line 644
sendEvent(name:par, value:val, isDigital: true) // library marker kkossev.deviceProfileLib, line 645
logInfo descriptionText // library marker kkossev.deviceProfileLib, line 646
} // library marker kkossev.deviceProfileLib, line 647
return true // library marker kkossev.deviceProfileLib, line 648
} // library marker kkossev.deviceProfileLib, line 649
else { // library marker kkossev.deviceProfileLib, line 650
logDebug "sendAttribute: not a virtual device (device.controllerType = ${device.controllerType}), continue " // library marker kkossev.deviceProfileLib, line 651
} // library marker kkossev.deviceProfileLib, line 652
boolean isTuyaDP // library marker kkossev.deviceProfileLib, line 653
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 654
def preference = dpMap.dp // TODO - remove it? // library marker kkossev.deviceProfileLib, line 655
try { // library marker kkossev.deviceProfileLib, line 656
isTuyaDP = dpMap.dp instanceof Number // check if dpMap.dp is a number // library marker kkossev.deviceProfileLib, line 657
} // library marker kkossev.deviceProfileLib, line 658
catch (e) { // library marker kkossev.deviceProfileLib, line 659
if (debug) { log.warn "sendAttribute: exception ${e} caught while checking isNumber() preference ${preference}" } // library marker kkossev.deviceProfileLib, line 660
return false // library marker kkossev.deviceProfileLib, line 661
} // library marker kkossev.deviceProfileLib, line 662
if (dpMap.dp != null && isTuyaDP) { // library marker kkossev.deviceProfileLib, line 663
// Tuya DP // library marker kkossev.deviceProfileLib, line 664
cmds = sendTuyaParameter(dpMap, par, scaledValue) // library marker kkossev.deviceProfileLib, line 665
if (cmds == null || cmds == []) { // library marker kkossev.deviceProfileLib, line 666
logWarn "sendAttribute: sendTuyaParameter par ${par} scaledValue ${scaledValue} returned null or empty list" // library marker kkossev.deviceProfileLib, line 667
return false // library marker kkossev.deviceProfileLib, line 668
} // library marker kkossev.deviceProfileLib, line 669
else { // library marker kkossev.deviceProfileLib, line 670
logDebug "sendAttribute: successfluly executed sendAttribute $customSetFunction($val (scaledValue=${scaledValue}))" // library marker kkossev.deviceProfileLib, line 671
sendZigbeeCommands( cmds ) // library marker kkossev.deviceProfileLib, line 672
return true // library marker kkossev.deviceProfileLib, line 673
} // library marker kkossev.deviceProfileLib, line 674
} // library marker kkossev.deviceProfileLib, line 675
/* groovylint-disable-next-line EmptyIfStatement */ // library marker kkossev.deviceProfileLib, line 676
else if (dpMap.at != null && dpMap.at == 'virtual') { // library marker kkossev.deviceProfileLib, line 677
// send a virtual attribute // library marker kkossev.deviceProfileLib, line 678
} // library marker kkossev.deviceProfileLib, line 679
else if (dpMap.at != null) { // library marker kkossev.deviceProfileLib, line 680
// cluster:attribute // library marker kkossev.deviceProfileLib, line 681
cmds = zclWriteAttribute(dpMap, scaledValue) // library marker kkossev.deviceProfileLib, line 682
if (cmds == null || cmds == []) { // library marker kkossev.deviceProfileLib, line 683
logWarn "sendAttribute: failed to write cluster:attribute ${dpMap.at} value ${scaledValue}" // library marker kkossev.deviceProfileLib, line 684
return false // library marker kkossev.deviceProfileLib, line 685
} // library marker kkossev.deviceProfileLib, line 686
} // library marker kkossev.deviceProfileLib, line 687
else { // library marker kkossev.deviceProfileLib, line 688
logWarn "sendAttribute: invalid dp or at value ${dpMap.dp} for parameter ${par}" // library marker kkossev.deviceProfileLib, line 689
return false // library marker kkossev.deviceProfileLib, line 690
} // library marker kkossev.deviceProfileLib, line 691
logDebug "sendAttribute: successfluly executed sendAttribute $customSetFunction($scaledValue)" // library marker kkossev.deviceProfileLib, line 692
sendZigbeeCommands( cmds ) // library marker kkossev.deviceProfileLib, line 693
return true // library marker kkossev.deviceProfileLib, line 694
} // library marker kkossev.deviceProfileLib, line 695
/** // library marker kkossev.deviceProfileLib, line 697
* SENDS a list of Zigbee commands to be sent to the device. // library marker kkossev.deviceProfileLib, line 698
* @param command - The command to send. Must be one of the commands defined in the DEVICE.commands map. // library marker kkossev.deviceProfileLib, line 699
* @param val - The value to send with the command, can be null. // library marker kkossev.deviceProfileLib, line 700
* @return true on success, false otherwise. // library marker kkossev.deviceProfileLib, line 701
*/ // library marker kkossev.deviceProfileLib, line 702
public boolean sendCommand(final String command_orig=null, final String val_orig=null) { // library marker kkossev.deviceProfileLib, line 703
//logDebug "sending command ${command}(${val}))" // library marker kkossev.deviceProfileLib, line 704
final String command = command_orig?.trim() // library marker kkossev.deviceProfileLib, line 705
final String val = val_orig?.trim() // library marker kkossev.deviceProfileLib, line 706
List cmds = [] // library marker kkossev.deviceProfileLib, line 707
Map supportedCommandsMap = DEVICE?.commands as Map // library marker kkossev.deviceProfileLib, line 708
if (supportedCommandsMap == null || supportedCommandsMap?.isEmpty()) { // library marker kkossev.deviceProfileLib, line 709
logInfo "sendCommand: no commands defined for device profile ${getDeviceProfile()} !" // library marker kkossev.deviceProfileLib, line 710
return false // library marker kkossev.deviceProfileLib, line 711
} // library marker kkossev.deviceProfileLib, line 712
// TODO: compare ignoring the upper/lower case of the command. // library marker kkossev.deviceProfileLib, line 713
List supportedCommandsList = DEVICE?.commands?.keySet() as List // library marker kkossev.deviceProfileLib, line 714
// check if the command is defined in the DEVICE commands map // library marker kkossev.deviceProfileLib, line 715
if (command == null || !(command in supportedCommandsList)) { // library marker kkossev.deviceProfileLib, line 716
logInfo "sendCommand: the command ${(command ?: '')} for device profile '${DEVICE?.description}' must be one of these : ${supportedCommandsList}" // library marker kkossev.deviceProfileLib, line 717
return false // library marker kkossev.deviceProfileLib, line 718
} // library marker kkossev.deviceProfileLib, line 719
/* groovylint-disable-next-line NoDef, VariableTypeRequired */ // library marker kkossev.deviceProfileLib, line 720
def func, funcResult // library marker kkossev.deviceProfileLib, line 721
try { // library marker kkossev.deviceProfileLib, line 722
func = DEVICE?.commands.find { it.key == command }.value // library marker kkossev.deviceProfileLib, line 723
// added 01/25/2025 : the commands now can be shorted : instead of a map kay and value 'printFingerprints':'printFingerprints' we can skip the value when it is the same: 'printFingerprints:' - the value is the same as the key // library marker kkossev.deviceProfileLib, line 724
if (func == null || func == '') { // library marker kkossev.deviceProfileLib, line 725
func = command // library marker kkossev.deviceProfileLib, line 726
} // library marker kkossev.deviceProfileLib, line 727
if (val != null && val != '') { // library marker kkossev.deviceProfileLib, line 728
logInfo "executed $func($val)" // library marker kkossev.deviceProfileLib, line 729
funcResult = "${func}"(val) // library marker kkossev.deviceProfileLib, line 730
} // library marker kkossev.deviceProfileLib, line 731
else { // library marker kkossev.deviceProfileLib, line 732
logInfo "executed $func()" // library marker kkossev.deviceProfileLib, line 733
funcResult = "${func}"() // library marker kkossev.deviceProfileLib, line 734
} // library marker kkossev.deviceProfileLib, line 735
} // library marker kkossev.deviceProfileLib, line 736
catch (e) { // library marker kkossev.deviceProfileLib, line 737
logWarn "sendCommand: Exception '${e}' caught while processing $func(${val})" // library marker kkossev.deviceProfileLib, line 738
return false // library marker kkossev.deviceProfileLib, line 739
} // library marker kkossev.deviceProfileLib, line 740
// funcResult is expected to be list of commands to be sent to the device, but can also return boolean or null // library marker kkossev.deviceProfileLib, line 741
// check if the result is a list of commands // library marker kkossev.deviceProfileLib, line 742
/* groovylint-disable-next-line Instanceof */ // library marker kkossev.deviceProfileLib, line 743
if (funcResult instanceof List) { // library marker kkossev.deviceProfileLib, line 744
cmds = funcResult // library marker kkossev.deviceProfileLib, line 745
if (cmds != null && cmds != []) { // library marker kkossev.deviceProfileLib, line 746
sendZigbeeCommands( cmds ) // library marker kkossev.deviceProfileLib, line 747
} // library marker kkossev.deviceProfileLib, line 748
} // library marker kkossev.deviceProfileLib, line 749
else if (funcResult == null) { // library marker kkossev.deviceProfileLib, line 750
return false // library marker kkossev.deviceProfileLib, line 751
} // library marker kkossev.deviceProfileLib, line 752
else { // library marker kkossev.deviceProfileLib, line 753
logDebug "sendCommand: $func(${val}) returned ${funcResult} instead of a list of commands!" // library marker kkossev.deviceProfileLib, line 754
return false // library marker kkossev.deviceProfileLib, line 755
} // library marker kkossev.deviceProfileLib, line 756
return true // library marker kkossev.deviceProfileLib, line 757
} // library marker kkossev.deviceProfileLib, line 758
/** // library marker kkossev.deviceProfileLib, line 760
* This method takes a string parameter and a boolean debug flag as input and returns a map containing the input details. // library marker kkossev.deviceProfileLib, line 761
* The method checks if the input parameter is defined in the device preferences and returns null if it is not. // library marker kkossev.deviceProfileLib, line 762
* It then checks if the input parameter is a boolean value and skips it if it is. // library marker kkossev.deviceProfileLib, line 763
* The method also checks if the input parameter is a number and sets the isTuyaDP flag accordingly. // library marker kkossev.deviceProfileLib, line 764
* If the input parameter is read-only, the method returns null. // library marker kkossev.deviceProfileLib, line 765
* The method then populates the input map with the name, type, title, description, range, options, and default value of the input parameter. // library marker kkossev.deviceProfileLib, line 766
* If the input parameter type is not supported, the method returns null. // library marker kkossev.deviceProfileLib, line 767
* @param param The input parameter to be checked. // library marker kkossev.deviceProfileLib, line 768
* @param debug A boolean flag indicating whether to log debug messages or not. // library marker kkossev.deviceProfileLib, line 769
* @return A map containing the input details. // library marker kkossev.deviceProfileLib, line 770
*/ // library marker kkossev.deviceProfileLib, line 771
public Map inputIt(String paramPar, boolean debug = false) { // library marker kkossev.deviceProfileLib, line 772
String param = paramPar.trim() // library marker kkossev.deviceProfileLib, line 773
Map input = [:] // library marker kkossev.deviceProfileLib, line 774
Map foundMap = [:] // library marker kkossev.deviceProfileLib, line 775
if (!(param in DEVICE?.preferences)) { if (debug) { log.warn "inputIt: preference ${param} not defined for this device!" } ; return [:] } // library marker kkossev.deviceProfileLib, line 776
Object preference // library marker kkossev.deviceProfileLib, line 777
try { preference = DEVICE?.preferences["$param"] } // library marker kkossev.deviceProfileLib, line 778
catch (e) { if (debug) { log.warn "inputIt: exception ${e} caught while parsing preference ${param} value ${preference}" } ; return [:] } // library marker kkossev.deviceProfileLib, line 779
// check for boolean values // library marker kkossev.deviceProfileLib, line 780
try { if (preference in [true, false]) { if (debug) { log.warn "inputIt: preference ${param} is boolean value ${preference} - skipping it for now!" } ; return [:] } } // library marker kkossev.deviceProfileLib, line 781
catch (e) { if (debug) { log.warn "inputIt: exception ${e} caught while checking for boolean values preference ${param} value ${preference}" } ; return [:] } // library marker kkossev.deviceProfileLib, line 782
/* // library marker kkossev.deviceProfileLib, line 783
// TODO - check if this is neccessary? isTuyaDP is not defined! // library marker kkossev.deviceProfileLib, line 784
try { isTuyaDP = preference.isNumber() } // library marker kkossev.deviceProfileLib, line 785
catch (e) { if (debug) { log.warn "inputIt: exception ${e} caught while checking isNumber() preference ${param} value ${preference}" } ; return [:] } // library marker kkossev.deviceProfileLib, line 786
*/ // library marker kkossev.deviceProfileLib, line 787
//if (debug) log.debug "inputIt: preference ${param} found. value is ${preference} isTuyaDP=${isTuyaDP}" // library marker kkossev.deviceProfileLib, line 788
foundMap = getPreferencesMapByName(param) // library marker kkossev.deviceProfileLib, line 789
//if (debug) log.debug "foundMap = ${foundMap}" // library marker kkossev.deviceProfileLib, line 790
if (foundMap == null || foundMap?.isEmpty()) { if (debug) { log.warn "inputIt: map not found for param '${param}'!" } ; return [:] } // library marker kkossev.deviceProfileLib, line 791
if (foundMap.rw != 'rw') { if (debug) { log.warn "inputIt: param '${param}' is read only!" } ; return [:] } // library marker kkossev.deviceProfileLib, line 792
if (foundMap.advanced != null && foundMap.advanced == true && settings.advancedOptions != true) { // library marker kkossev.deviceProfileLib, line 793
if (debug) { log.debug "inputIt: param '${param}' is advanced!" } // library marker kkossev.deviceProfileLib, line 794
return [:] // library marker kkossev.deviceProfileLib, line 795
} // library marker kkossev.deviceProfileLib, line 796
input.name = foundMap.name // library marker kkossev.deviceProfileLib, line 797
input.type = foundMap.type // bool, enum, number, decimal // library marker kkossev.deviceProfileLib, line 798
input.title = foundMap.title // library marker kkossev.deviceProfileLib, line 799
//input.description = (foundMap.description ?: foundMap.title)?.replaceAll(/<\/?b>/, '') // if description is not defined, use the title // library marker kkossev.deviceProfileLib, line 800
input.description = foundMap.description ?: '' // if description is not defined, skip it // library marker kkossev.deviceProfileLib, line 801
if (input.type in ['number', 'decimal']) { // library marker kkossev.deviceProfileLib, line 802
if (foundMap.min != null && foundMap.max != null) { // library marker kkossev.deviceProfileLib, line 803
input.range = "${foundMap.min}..${foundMap.max}" // library marker kkossev.deviceProfileLib, line 804
} // library marker kkossev.deviceProfileLib, line 805
if (input.range != null && input.description != null) { // library marker kkossev.deviceProfileLib, line 806
if (input.description != '') { input.description += '
' } // library marker kkossev.deviceProfileLib, line 807
input.description += "Range: ${input.range}" // library marker kkossev.deviceProfileLib, line 808
if (foundMap.unit != null && foundMap.unit != '') { // library marker kkossev.deviceProfileLib, line 809
input.description += " (${foundMap.unit})" // library marker kkossev.deviceProfileLib, line 810
} // library marker kkossev.deviceProfileLib, line 811
} // library marker kkossev.deviceProfileLib, line 812
} // library marker kkossev.deviceProfileLib, line 813
/* groovylint-disable-next-line SpaceAfterClosingBrace */ // library marker kkossev.deviceProfileLib, line 814
else if (input.type == 'enum') { // library marker kkossev.deviceProfileLib, line 815
input.options = foundMap.map // library marker kkossev.deviceProfileLib, line 816
}/* // library marker kkossev.deviceProfileLib, line 817
else if (input.type == "bool") { // library marker kkossev.deviceProfileLib, line 818
input.options = ["true", "false"] // library marker kkossev.deviceProfileLib, line 819
}*/ // library marker kkossev.deviceProfileLib, line 820
else { // library marker kkossev.deviceProfileLib, line 821
if (debug) { log.warn "inputIt: unsupported type ${input.type} for param '${param}'!" } // library marker kkossev.deviceProfileLib, line 822
return [:] // library marker kkossev.deviceProfileLib, line 823
} // library marker kkossev.deviceProfileLib, line 824
if (input.defVal != null) { // library marker kkossev.deviceProfileLib, line 825
input.defVal = foundMap.defVal // library marker kkossev.deviceProfileLib, line 826
} // library marker kkossev.deviceProfileLib, line 827
return input // library marker kkossev.deviceProfileLib, line 828
} // library marker kkossev.deviceProfileLib, line 829
/** // library marker kkossev.deviceProfileLib, line 831
* Returns the device name and profile based on the device model and manufacturer. // library marker kkossev.deviceProfileLib, line 832
* @param model The device model (optional). If not provided, it will be retrieved from the device data value. // library marker kkossev.deviceProfileLib, line 833
* @param manufacturer The device manufacturer (optional). If not provided, it will be retrieved from the device data value. // library marker kkossev.deviceProfileLib, line 834
* @return A list containing the device name and profile. // library marker kkossev.deviceProfileLib, line 835
*/ // library marker kkossev.deviceProfileLib, line 836
public List getDeviceNameAndProfile(String model=null, String manufacturer=null) { // library marker kkossev.deviceProfileLib, line 837
String deviceName = UNKNOWN, deviceProfile = UNKNOWN // library marker kkossev.deviceProfileLib, line 838
String deviceModel = model != null ? model : device.getDataValue('model') ?: UNKNOWN // library marker kkossev.deviceProfileLib, line 839
String deviceManufacturer = manufacturer != null ? manufacturer : device.getDataValue('manufacturer') ?: UNKNOWN // library marker kkossev.deviceProfileLib, line 840
deviceProfilesV3.each { profileName, profileMap -> // library marker kkossev.deviceProfileLib, line 841
profileMap.fingerprints.each { fingerprint -> // library marker kkossev.deviceProfileLib, line 842
if (fingerprint.model == deviceModel && fingerprint.manufacturer == deviceManufacturer) { // library marker kkossev.deviceProfileLib, line 843
deviceProfile = profileName // library marker kkossev.deviceProfileLib, line 844
deviceName = fingerprint.deviceJoinName ?: deviceProfilesV3[deviceProfile].description ?: UNKNOWN // library marker kkossev.deviceProfileLib, line 845
logDebug "found exact match for model ${deviceModel} manufacturer ${deviceManufacturer} : profileName=${deviceProfile} deviceName =${deviceName}" // library marker kkossev.deviceProfileLib, line 846
return [deviceName, deviceProfile] // library marker kkossev.deviceProfileLib, line 847
} // library marker kkossev.deviceProfileLib, line 848
} // library marker kkossev.deviceProfileLib, line 849
} // library marker kkossev.deviceProfileLib, line 850
if (deviceProfile == UNKNOWN) { // library marker kkossev.deviceProfileLib, line 851
logWarn "getDeviceNameAndProfile: NOT FOUND! deviceName =${deviceName} profileName=${deviceProfile} for model ${deviceModel} manufacturer ${deviceManufacturer}" // library marker kkossev.deviceProfileLib, line 852
} // library marker kkossev.deviceProfileLib, line 853
return [deviceName, deviceProfile] // library marker kkossev.deviceProfileLib, line 854
} // library marker kkossev.deviceProfileLib, line 855
// called from initializeVars( fullInit = true) // library marker kkossev.deviceProfileLib, line 857
public void setDeviceNameAndProfile(String model=null, String manufacturer=null) { // library marker kkossev.deviceProfileLib, line 858
def (String deviceName, String deviceProfile) = getDeviceNameAndProfile(model, manufacturer) // library marker kkossev.deviceProfileLib, line 859
if (deviceProfile == null || deviceProfile == UNKNOWN) { // library marker kkossev.deviceProfileLib, line 860
logInfo "unknown model ${deviceModel} manufacturer ${deviceManufacturer}" // library marker kkossev.deviceProfileLib, line 861
// don't change the device name when unknown // library marker kkossev.deviceProfileLib, line 862
state.deviceProfile = UNKNOWN // library marker kkossev.deviceProfileLib, line 863
} // library marker kkossev.deviceProfileLib, line 864
String dataValueModel = model != null ? model : device.getDataValue('model') ?: UNKNOWN // library marker kkossev.deviceProfileLib, line 865
String dataValueManufacturer = manufacturer != null ? manufacturer : device.getDataValue('manufacturer') ?: UNKNOWN // library marker kkossev.deviceProfileLib, line 866
if (deviceName != NULL && deviceName != UNKNOWN) { // library marker kkossev.deviceProfileLib, line 867
device.setName(deviceName) // library marker kkossev.deviceProfileLib, line 868
state.deviceProfile = deviceProfile // library marker kkossev.deviceProfileLib, line 869
device.updateSetting('forcedProfile', [value:deviceProfilesV3[deviceProfile]?.description, type:'enum']) // library marker kkossev.deviceProfileLib, line 870
logInfo "device model ${dataValueModel} manufacturer ${dataValueManufacturer} was set to : deviceProfile=${deviceProfile} : deviceName=${deviceName}" // library marker kkossev.deviceProfileLib, line 871
} else { // library marker kkossev.deviceProfileLib, line 872
logInfo "device model ${dataValueModel} manufacturer ${dataValueManufacturer} was not found!" // library marker kkossev.deviceProfileLib, line 873
} // library marker kkossev.deviceProfileLib, line 874
} // library marker kkossev.deviceProfileLib, line 875
public List refreshFromConfigureReadList(List refreshList) { // library marker kkossev.deviceProfileLib, line 877
logDebug "refreshFromConfigureReadList(${refreshList})" // library marker kkossev.deviceProfileLib, line 878
List cmds = [] // library marker kkossev.deviceProfileLib, line 879
if (refreshList != null && !refreshList.isEmpty()) { // library marker kkossev.deviceProfileLib, line 880
//List refreshList = DEVICE.refresh // library marker kkossev.deviceProfileLib, line 881
for (String k : refreshList) { // library marker kkossev.deviceProfileLib, line 882
k = k.replaceAll('\\[|\\]', '') // library marker kkossev.deviceProfileLib, line 883
if (k != null) { // library marker kkossev.deviceProfileLib, line 884
// check whether the string in the refreshList matches an attribute name in the DEVICE.attributes list // library marker kkossev.deviceProfileLib, line 885
Map map = DEVICE.attributes.find { it.name == k } // library marker kkossev.deviceProfileLib, line 886
if (map != null) { // library marker kkossev.deviceProfileLib, line 887
Map mfgCode = map.mfgCode != null ? ['mfgCode':map.mfgCode] : [:] // library marker kkossev.deviceProfileLib, line 888
cmds += zigbee.readAttribute(hubitat.helper.HexUtils.hexStringToInt((map.at).split(':')[0]), hubitat.helper.HexUtils.hexStringToInt((map.at).split(':')[1]), mfgCode, delay = 100) // library marker kkossev.deviceProfileLib, line 889
} // library marker kkossev.deviceProfileLib, line 890
// check whether the string in the refreshList matches a method defined somewhere in the code // library marker kkossev.deviceProfileLib, line 891
if (this.respondsTo(k)) { // library marker kkossev.deviceProfileLib, line 892
cmds += this."${k}"() // library marker kkossev.deviceProfileLib, line 893
} // library marker kkossev.deviceProfileLib, line 894
} // library marker kkossev.deviceProfileLib, line 895
} // library marker kkossev.deviceProfileLib, line 896
} // library marker kkossev.deviceProfileLib, line 897
return cmds // library marker kkossev.deviceProfileLib, line 898
} // library marker kkossev.deviceProfileLib, line 899
// called from customRefresh() in the device drivers // library marker kkossev.deviceProfileLib, line 901
public List refreshFromDeviceProfileList() { // library marker kkossev.deviceProfileLib, line 902
logDebug 'refreshFromDeviceProfileList()' // library marker kkossev.deviceProfileLib, line 903
List cmds = [] // library marker kkossev.deviceProfileLib, line 904
if (DEVICE?.refresh != null) { // library marker kkossev.deviceProfileLib, line 905
List refreshList = DEVICE.refresh // library marker kkossev.deviceProfileLib, line 906
for (String k : refreshList) { // library marker kkossev.deviceProfileLib, line 907
k = k.replaceAll('\\[|\\]', '') // library marker kkossev.deviceProfileLib, line 908
if (k != null) { // library marker kkossev.deviceProfileLib, line 909
// check whether the string in the refreshList matches an attribute name in the DEVICE.attributes list // library marker kkossev.deviceProfileLib, line 910
Map map = DEVICE.attributes.find { it.name == k } // library marker kkossev.deviceProfileLib, line 911
if (map != null) { // library marker kkossev.deviceProfileLib, line 912
Map mfgCode = map.mfgCode != null ? ['mfgCode':map.mfgCode] : [:] // library marker kkossev.deviceProfileLib, line 913
cmds += zigbee.readAttribute(hubitat.helper.HexUtils.hexStringToInt((map.at).split(':')[0]), hubitat.helper.HexUtils.hexStringToInt((map.at).split(':')[1]), mfgCode, delay = 100) // library marker kkossev.deviceProfileLib, line 914
} // library marker kkossev.deviceProfileLib, line 915
// check whether the string in the refreshList matches a method defined somewhere in the code // library marker kkossev.deviceProfileLib, line 916
if (this.respondsTo(k)) { // library marker kkossev.deviceProfileLib, line 917
cmds += this."${k}"() // library marker kkossev.deviceProfileLib, line 918
} // library marker kkossev.deviceProfileLib, line 919
} // library marker kkossev.deviceProfileLib, line 920
} // library marker kkossev.deviceProfileLib, line 921
} // library marker kkossev.deviceProfileLib, line 922
return cmds // library marker kkossev.deviceProfileLib, line 923
} // library marker kkossev.deviceProfileLib, line 924
// TODO! - remove? // library marker kkossev.deviceProfileLib, line 926
List refreshDeviceProfile() { // library marker kkossev.deviceProfileLib, line 927
List cmds = [] // library marker kkossev.deviceProfileLib, line 928
if (cmds == []) { cmds = ['delay 299'] } // library marker kkossev.deviceProfileLib, line 929
logDebug "refreshDeviceProfile() : ${cmds}" // library marker kkossev.deviceProfileLib, line 930
return cmds // library marker kkossev.deviceProfileLib, line 931
} // library marker kkossev.deviceProfileLib, line 932
// TODO ! - remove? // library marker kkossev.deviceProfileLib, line 934
List configureDeviceProfile() { // library marker kkossev.deviceProfileLib, line 935
List cmds = [] // library marker kkossev.deviceProfileLib, line 936
logDebug "configureDeviceProfile() : ${cmds}" // library marker kkossev.deviceProfileLib, line 937
if (cmds == []) { cmds = ['delay 299'] } // library marker kkossev.deviceProfileLib, line 938
return cmds // library marker kkossev.deviceProfileLib, line 939
} // library marker kkossev.deviceProfileLib, line 940
// TODO! - remove? // library marker kkossev.deviceProfileLib, line 942
List initializeDeviceProfile() { // library marker kkossev.deviceProfileLib, line 943
List cmds = [] // library marker kkossev.deviceProfileLib, line 944
logDebug "initializeDeviceProfile() : ${cmds}" // library marker kkossev.deviceProfileLib, line 945
if (cmds == []) { cmds = ['delay 299',] } // library marker kkossev.deviceProfileLib, line 946
return cmds // library marker kkossev.deviceProfileLib, line 947
} // library marker kkossev.deviceProfileLib, line 948
public void deviceProfileInitializeVars(boolean fullInit=false) { // library marker kkossev.deviceProfileLib, line 950
logDebug "deviceProfileInitializeVars(${fullInit})" // library marker kkossev.deviceProfileLib, line 951
if (state.deviceProfile == null) { // library marker kkossev.deviceProfileLib, line 952
setDeviceNameAndProfile() // library marker kkossev.deviceProfileLib, line 953
} // library marker kkossev.deviceProfileLib, line 954
} // library marker kkossev.deviceProfileLib, line 955
public void initEventsDeviceProfile(boolean fullInit=false) { // library marker kkossev.deviceProfileLib, line 957
String ps = DEVICE?.device?.powerSource // library marker kkossev.deviceProfileLib, line 958
logDebug "initEventsDeviceProfile(${fullInit}) for deviceProfile=${state.deviceProfile} DEVICE?.device?.powerSource=${ps} ps.isEmpty()=${ps?.isEmpty()}" // library marker kkossev.deviceProfileLib, line 959
if (ps != null && !ps.isEmpty()) { // library marker kkossev.deviceProfileLib, line 960
sendEvent(name: 'powerSource', value: ps, descriptionText: "Power Source set to '${ps}'", type: 'digital') // library marker kkossev.deviceProfileLib, line 961
} // library marker kkossev.deviceProfileLib, line 962
} // library marker kkossev.deviceProfileLib, line 963
///////////////////////////// Tuya DPs ///////////////////////////////// // library marker kkossev.deviceProfileLib, line 965
// // library marker kkossev.deviceProfileLib, line 967
// called from parse() // library marker kkossev.deviceProfileLib, line 968
// returns: true - do not process this message if the spammy DP is defined in the spammyDPsToIgnore element of the active Device Profile // library marker kkossev.deviceProfileLib, line 969
// false - the processing can continue // library marker kkossev.deviceProfileLib, line 970
// // library marker kkossev.deviceProfileLib, line 971
public boolean isSpammyDPsToIgnore(Map descMap) { // library marker kkossev.deviceProfileLib, line 972
//log.trace "isSpammyDPsToIgnore: ${state.deviceProfile == 'TS0225_LINPTECH_RADAR'} ${descMap.cluster == 'E002'} ${descMap.attrId == 'E00A'} ${settings?.ignoreDistance == true}" // library marker kkossev.deviceProfileLib, line 973
if (state.deviceProfile == 'TS0225_LINPTECH_RADAR' && descMap.cluster == 'E002' && descMap.attrId == 'E00A' && settings?.ignoreDistance == true) { return true } // library marker kkossev.deviceProfileLib, line 974
if (!(descMap?.clusterId == 'EF00' && (descMap?.command in ['01', '02']))) { return false } // library marker kkossev.deviceProfileLib, line 975
if (descMap?.data?.size <= 2) { return false } // library marker kkossev.deviceProfileLib, line 976
int dp = zigbee.convertHexToInt(descMap.data[2]) // library marker kkossev.deviceProfileLib, line 977
List spammyList = deviceProfilesV3[getDeviceProfile()]?.spammyDPsToIgnore as List // library marker kkossev.deviceProfileLib, line 978
return (spammyList != null && (dp in spammyList) && ((settings?.ignoreDistance ?: false) == true)) // library marker kkossev.deviceProfileLib, line 979
} // library marker kkossev.deviceProfileLib, line 980
// // library marker kkossev.deviceProfileLib, line 982
// called from processTuyaDP(), processTuyaDPfromDeviceProfile(), isChattyDeviceReport() // library marker kkossev.deviceProfileLib, line 983
// returns: true - do not generate Debug log messages if the chatty DP is defined in the spammyDPsToNotTrace element of the active Device Profile // library marker kkossev.deviceProfileLib, line 984
// false - debug logs can be generated // library marker kkossev.deviceProfileLib, line 985
// // library marker kkossev.deviceProfileLib, line 986
public boolean isSpammyDPsToNotTrace(Map descMap) { // library marker kkossev.deviceProfileLib, line 987
//log.trace "isSpammyDPsToNotTrace: ${state.deviceProfile == 'TS0225_LINPTECH_RADAR'} ${descMap.cluster == 'E002'} ${descMap.attrId == 'E00A'} ${settings?.ignoreDistance == true}" // library marker kkossev.deviceProfileLib, line 988
if (state.deviceProfile == 'TS0225_LINPTECH_RADAR' && descMap.cluster == 'E002' && descMap.attrId == 'E00A' && settings?.ignoreDistance == true) { return true } // library marker kkossev.deviceProfileLib, line 989
if (!(descMap?.clusterId == 'EF00' && (descMap?.command in ['01', '02']))) { return false } // library marker kkossev.deviceProfileLib, line 990
if (descMap?.data?.size <= 2) { return false } // library marker kkossev.deviceProfileLib, line 991
int dp = zigbee.convertHexToInt(descMap.data[2]) // library marker kkossev.deviceProfileLib, line 992
List spammyList = deviceProfilesV3[getDeviceProfile()]?.spammyDPsToNotTrace as List // library marker kkossev.deviceProfileLib, line 993
return (spammyList != null && (dp in spammyList)) // library marker kkossev.deviceProfileLib, line 994
} // library marker kkossev.deviceProfileLib, line 995
// all DPs are spammy - sent periodically! // library marker kkossev.deviceProfileLib, line 997
public boolean isSpammyDeviceProfile() { // library marker kkossev.deviceProfileLib, line 998
if (deviceProfilesV3 == null || deviceProfilesV3[getDeviceProfile()] == null) { return false } // library marker kkossev.deviceProfileLib, line 999
Boolean isSpammy = deviceProfilesV3[getDeviceProfile()]?.device?.isSpammy ?: false // library marker kkossev.deviceProfileLib, line 1000
return isSpammy // library marker kkossev.deviceProfileLib, line 1001
} // library marker kkossev.deviceProfileLib, line 1002
/* groovylint-disable-next-line UnusedMethodParameter */ // library marker kkossev.deviceProfileLib, line 1004
private List