/* ============================================================================= Hubitat Elevation Driver for Tuya Zigbee dimmer modules (1-Gang and 2-Gang) https://github.com/matt-hammond-001/hubitat-code ----------------------------------------------------------------------------- This code is licensed as follows: BSD 3-Clause License Copyright (c) 2020, Matt Hammond All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ----------------------------------------------------------------------------- ver 0.2.0 11/12/2021 Matt Hammond - added _TZ3000_7ysdnebc ver 0.2.1 2021/12/29 kkossev - added cluster 0003 to the fingerprint, model _TZ3000_7ysdnebc ver 0.2.2 2022/05/28 kkossev - moved model and inClusters to modelConfigs, added _TZE200_vm1gyrso 3-Gang Dimmer module ver 0.2.3 2022/08/30 kkossev - added TS110E _TZ3210_ngqk6jia fingerprint ver 0.2.4 2022/09/19 kkossev - added TS0601 _TZE200_w4cryh2i fingerprint ver 0.2.5 2022/10/19 kkossev - TS0601 level control; infoLogging ver 0.2.6 2022/10/22 kkossev - importURL to dev. branch; toggle() for TS0601; 'autoOn' for TS0601; level scaling for TS0601; minLevel and maxLevel receive/send for TS0601; bugfixes for TS0601 single EP devices ver 0.2.7 2022/11/11 kkossev - added _TZE200_ip2akl4w _TZE200_1agwnems _TZE200_la2c2uo9 _TZE200_579lguh2 _TZE200_fjjbhx9d _TZE200_drs6j6m5; secure the while loops coode when deleting and creating child devices; ver 0.2.8 2022/11/13 kkossev - _TZE200_ip2akl4w fingerprint hardcoded ver 0.2.9 2022/12/10 kkossev - deleting child devices bug fix; added _TZE200_fvldku9h Tuya Fan Switch; unscheduling old periodic jobs; Tuya Time Sync'; ver 0.2.10 2023/01/02 kkossev - added _TZE200_e3oitdyu ver 0.2.11 2023/02/19 kkossev - added TS110E _TZ3210_k1msuvg6; TS0601 _TZE200_r32ctezx fan controller; changed importURL to dev. branch; dp=4 - type of light source?; added GLEDOPTO GL-SD-001; 1-gang modles bug fixes; ver 0.2.12 2023/03/12 kkossev - more debug logging; fixed incorrect on/off status reporting bug for the standard ZCL dimmers; added autoRefresh option for GLEDOPTO ver 0.3.0 2023/03/12 kkossev - bugfix: TS110E/F configiration for the automatic level reporting was not working. ver 0.4.0 2023/03/25 kkossev - added TS110E _TZ3210_pagajpog; added advancedOptions; added forcedProfile; added deviceProfilesV2; added initialize() command; sendZigbeeCommands() in all Command handlers; configure() and updated() do not re-initialize the device!; setDeviceNameAndProfile(); destEP here and there ver 0.4.1 2023/03/31 kkossev - added new TS110E_GIRIER_DIMMER product profile (Girier _TZ3210_k1msuvg6 support @jshimota); installed() initialization and configuration sequence changed'; fixed GIRIER Toggle command not working; added _TZ3210_4ubylghk ver 0.4.2 2023/04/10 kkossev - added TS110E_LONSONHO_DIMMER; decode correction level/10; fixed exception for non-existent child device; all Current States are cleared on Initialize; Lonsonho brightness control; Hubitat 'F2 bug' patched; Lonsonho change level uses cluster 0x0008 ver 0.4.3 2023/04/12 kkossev - numEps bug fix; generic ZCL dimmer support; patch for Girier firmware bug on Refresh command 01 reporting off state; DeviceWrapper fixes; added TS0505B_TUYA_BULB; bugfix when endpointId is different than 01 ver 0.4.4 2023/04/23 kkossev - added capability 'Health Check'; Lonsonho dimmers setLevel working now (parent device) ! ver 0.4.5 2023/05/17 kkossev - removed obsolete deviceSimulation options; added _TZ3210_ngqk6jia fingerprint1-gang ver 0.4.6 2023/06/11 kkossev - child devices creation critical bug fix. ver 0.5.0 2023/06/14 kkossev - added trace logging; fixed healthStatus offline for TS0601 and Lonsonho 2nd gang; temporary disabled the initialize() command; changed _TZ3210_ngqk6jia to Lonsonho TS011E group; fixed TS0601 1st gang not working ver 0.5.1 2023/06/15 kkossev - added TS110E _TZ3210_3mpwqzuu 2 gang; fixed minLevel bug scaling; added RTT measurement in the ping command; added rxCtr, txCtr, switchCtr, leveCtr; _TZ3210_4ubylghk inClusters correction; TS110E_LONSONHO_DIMMER group model bug fix; ver 0.5.2 2023/06/19 kkossev - added digital/physical; checkDriverVersion fix; _TZ3210_ngqk6jia ping fix; ver 0.6.0 2023/07/30 kkossev - child devices ping(), toggle(), physical/digital, healthStatus offline bug fixes; added [refresh] event info; ver 0.6.1 2023/08/23 kkossev - bugfix: _TZE200_e3oitdyu model changed to TS0601; initialize button re-enabled (loads all defaults!); cmdTime state secured; ver 0.6.2 2023/09/09 kkossev - added TS0601 _TZE204_zenj4lxv Moes ZigBee 2-Gang Dimmer; _TZE204_1v1dxkck (3-gang); _TZE204_hlx9tnzb (1-gang); stopping dimmer countdowns; ver 0.6.3 2023/10/15 kkossev - setting ledMode, powerOnMode lightType for TS0601 dimmers ver 0.6.4 2024/07/22 hhorigian - added new version of: TS110E _TZ3210_pagajpog 2 gang Dimmer, with Application id= (44). New inClusters:0005,0004,0006,0008,E001,1000,0003,0000 ver 0.7.0 2024/07/24 kkossev - TS0601 _TZE200_r32ctezx moved to new TS0601_LERLINK_FAN group; resolved merge conflicts; ver 0.7.1 2024/07/29 hhorigian - added new version of: TS110E _TZ3210_tkkb1ym8 2 gang Dimmer ver 0.7.2 2024/09/02 kkossev - _TZE200_1agwnems MG-ZD01W 1-Gang Dimmer - inClusters fingerprint correction; ver 0.7.3 2024/09/27 kkossev - (dev.branch) ignoring the min and max brightness for OzSmartThings (_TZE200_1agwnems) dimmer; added TS0601 _TZE204_o9gyszw2 Avatto ZigBee 2-Gang Dimmer; TS0601 _TZE200_p0gzbqct; TS0601 _TZE204_vevc4c6g; TS110E _TZ3210_wdexaypg * * TODO: LED configuration settings * TODO: Lonsonho _TZ3210_4ubylghk : bulb type : https://github.com/zigpy/zha-device-handlers/issues/1415#issuecomment-1062843118 * TODO: Lonsonho _TZ3210_pagajpog : when momentarily push switch 1. It is like it doesn't recognize it as pressing the switch, but pressing it again can cause it to go into pairing mode. @user3633 * TODO: Girier _TZ3210_3mpwqzuu: physical switch not reflected in the driver @user5386 * TODO: Girier _TZ3210_3mpwqzuu: Every change in intensity through the dashboard, the lamp reaches the desired level and then lowers intensity until it is turned off, (for both channels) @user5386 * TODO: TS0601 3 gangs - check whether toggle() is working for the 2nd and the 3rd gang * TODO: Enable the Initialize() button w/ Yes/No selection * TODO: TS110E_GIRIER_DIMMER TS011E power_on_behavior_1, TS110E_switch_type ['toggle', 'state', 'momentary']) (TS110E_options - needsMagic()) * TODO: Tuya Fan Switch support * TODO: add TS110E 'light_type', 'switch_type' * TODO: add startLevelChange/stopLevelChange (Gledopto) * */ def version() { "0.7.3" } def timeStamp() {"2024/09/27 7:44 AM"} @Field static final Boolean _DEBUG = false import groovy.transform.Field import hubitat.device.HubAction import hubitat.device.Protocol import com.hubitat.app.DeviceWrapper import com.hubitat.app.ChildDeviceWrapper import com.hubitat.app.ParentDeviceWrapper metadata { definition ( name: "Tuya Zigbee dimmer module", namespace: "matthammonddotorg", author: "Matt Hammond", description: "Driver for Tuya zigbee dimmer modules", documentationLink: "https://github.com/matt-hammond-001/hubitat-code/blob/master/drivers/tuya-zigbee-dimmer-module.README.md", importUrl: "https://raw.githubusercontent.com/kkossev/hubitat-matt-hammond-fork/development/drivers/tuya-zigbee-dimmer-module.groovy" ) { capability "Configuration" capability "Refresh" capability "Light" capability "Switch" capability "SwitchLevel" capability 'Health Check' attribute 'healthStatus', 'enum', [ 'unknown', 'offline', 'online' ] attribute "rtt", "number" attribute 'ledMode', 'enum', TS0601LEDOptions.options.values() as List attribute 'powerOnMode', 'enum', TS0601PowerOnOptions.options.values() as List attribute 'lightType', 'enum', TS110ELightTypeOptions.options.values() as List command "toggle" command "initialize", [[name: "Initialize the sensor after switching drivers. \n\r ***** Will load device default values! *****" ]] if (_DEBUG == true) { command "init" command "tuyaTest", [ [name:"dpCommand", type: "STRING", description: "Tuya DP Command", constraints: ["STRING"]], [name:"dpValue", type: "STRING", description: "Tuya DP value", constraints: ["STRING"]], [name:"dpType", type: "ENUM", constraints: ["DP_TYPE_VALUE", "DP_TYPE_BOOL", "DP_TYPE_ENUM"], description: "DP data type"] ] command "testRefresh", [[name: "see the live logs" ]] command "testParse", [[name: "test", type: "STRING", description: "test", constraints: ["STRING"]]] command "testX", [[name: "testX", type: "STRING", description: "testX", constraints: ["STRING"]]] } modelConfigs.each{ data -> fingerprint profileId: "0104", inClusters: data.value.inClusters, outClusters:"0019,000A", model: data.value.model, manufacturer: data.key, deviceJoinName: data.value.joinName } } preferences { input "infoEnable", "bool", title: "Enable info logging", required: false, defaultValue: true input "debugEnable", "bool", title: "Enable debug logging", required: false, defaultValue: DEFAULT_DEBUG_OPT input "autoOn", "bool", title: "Turn on when level adjusted", description: "Switch turns on automatically when dimmer level is adjusted.", required: true, multiple: false, defaultValue: true input "autoRefresh", "bool", title: "Auto refresh when level adjusted", description: "Automatically send an Refresh command when dimmer level is adjusted.", required: true, multiple: false, defaultValue: false input "minLevel", "number", title: "Minimum level", description: "Minimum brightness level (%). 0% on the dimmer level is mapped to this.", required: true, multiple: false, defaultValue: DEFAULT_MIN_LEVEL if (minLevel < 0) { minLevel = 0 } else if (minLevel > 99) { minLevel = 99 } input "maxLevel", "number", title: "Maximum level", description: "Maximum brightness level (%). 100% on the dimmer level is mapped to this.", required: true, multiple: false, defaultValue: DEFAULT_MAX_LEVEL if (maxLevel < minLevel) { maxLevel = DEFAULT_MAX_LEVEL } else if (maxLevel > DEFAULT_MAX_LEVEL) { maxLevel = DEFAULT_MAX_LEVEL } /* if (isLonsonho()) { input name: 'lightType', type: 'enum', title: 'Light Type', options: TS110ELightTypeOptions.options, description: 'Configures the lights type.' input name: 'switchType', type: 'enum', title: 'Switch Type', options: TS110ESwitchTypeOptions.options, defaultValue: TS110ESwitchTypeOptions.defaultValue, description: 'Configures the switch type.' } */ if (isTS0601()) { input name: 'ledMode', type: 'enum', title: 'LED mode', options: TS0601LEDOptions.options, description: 'Configures the LED mode.' input name: 'powerOnMode', type: 'enum', title: 'Power-On mode', options: TS0601PowerOnOptions.options, description: 'Configures the Power-On mode.' input name: 'lightType', type: 'enum', title: 'Light type', options: TS110ELightTypeOptions.options, description: 'Configures the light type.' } input (name: "advancedOptions", type: "bool", title: "Advanced Options", description: " ", defaultValue: false) if (advancedOptions == true) { input "traceEnable", "bool", title: "Enable trace logging", description: "Even more detailed logging. Toggle it on if asked by the developer...", required: false, defaultValue: false input (name: "forcedProfile", type: "enum", title: "Device Profile", description: "Forcely change the Device Profile, if the model/manufacturer was not recognized automatically.
Warning! Manually setting a device profile may not always work!", options: getDeviceProfilesMap() /*getDeviceProfiles()*/) input name: 'healthCheckInterval', type: 'enum', title: 'Healthcheck Interval', options: HealthcheckIntervalOpts.options, defaultValue: HealthcheckIntervalOpts.defaultValue, required: true, description:\ 'Changes how often the hub pings the bulb to check health.' } } } @Field static final Boolean DEFAULT_DEBUG_OPT = true @Field static final int COMMAND_TIMEOUT = 10 // Command timeout before setting healthState to offline @Field static final Integer MAX_PING_MILISECONDS = 10000 // rtt more than 10 seconds will be ignored @Field static final Integer REFRESH_TIMER = 5000 // refresh time in miliseconds @Field static final String UNKNOWN = 'UNKNOWN' @Field static final int DEFAULT_MIN_LEVEL = 0 @Field static final int DEFAULT_MAX_LEVEL = 100 @Field static final int TS110E_LONSONHO_LEVEL_ATTR = 0xF000 // (61440) @Field static final int TS110E_LONSONHO_BULB_TYPE_ATTR = 0xFC02 @Field static final int TS110E_LONSONHO_MIN_LEVEL_ATTR = 0xFC03 @Field static final int TS110E_LONSONHO_MAX_LEVEL_ATTR = 0xFC04 @Field static final int TS110E_LONSONHO_CUSTOM_LEVEL_CMD = 0x00F0 boolean isOzSmartThings() { device.getDataValue("manufacturer") == "_TZE200_1agwnems" } @Field static Map HealthcheckIntervalOpts = [ defaultValue: 10, options: [ 10: 'Every 10 Mins', 15: 'Every 15 Mins', 30: 'Every 30 Mins', 45: 'Every 45 Mins', '59': 'Every Hour', '00': 'Disabled' ] ] @Field static final Map TS110ESwitchTypeOptions = [ // 0xFC00 (64512) defaultValue: 0, options : [0: 'momentary', 1: 'toggle', 2: 'state'] ] @Field static final Map TS110ELightTypeOptions = [ // 0xFC02 (64514), type: 0x20 defaultValue: 0, options : [0: 'LED', 1: 'incandescent', 2: 'halogen'] ] @Field static final Map TS0601LEDOptions = [ // ledMode - Moes Dimmers defaultValue: 0, options : [0: 'always off', 1: 'lit when on', 2: 'lit when off'] ] @Field static final Map TS0601PowerOnOptions = [ // ledMode - Moes Dimmers defaultValue: 0, options : [0: 'off', 1: 'on', 2: 'last state'] ] @Field static final int TS110E_MIN_BRIGHTNESS = 0xFC03 // (64515) // TODO: 0, 1000 -> 1, 255, type: 0x21 Check !!! @Field static final int TS110E_MAX_BRIGHTNESS = 0xFC04 // (64516) // TODO: 0, 1000 -> 1, 255, type: 0x21 - Check !!! // Girier TS110E may not support power-on-behavour? https://github.com/Koenkk/zigbee2mqtt/issues/15902#issuecomment-1382848150 https://github.com/Koenkk/zigbee2mqtt/issues/16804 @Field static def modelConfigs = [ "_TYZB01_v8gtiaed": [ numEps: 2, model: "TS110F", inClusters: "0000,0004,0005,0006,0008", joinName: "Tuya Zigbee 2-Gang Dimmer module" ], // '2 gang smart dimmer switch module with neutral' "_TYZB01_qezuin6k": [ numEps: 1, model: "TS110F", inClusters: "0000,0004,0005,0006,0008", joinName: "Tuya Zigbee 1-Gang Dimmer module" ], // '1 gang smart dimmer switch module with neutral' "_TZ3000_ktuoyvt5": [ numEps: 1, model: "TS110F", inClusters: "0000,0004,0005,0006,0008", joinName: "Tuya Zigbee 1-Gang Switch module" ], // '1 gang smart switch module without neutral' "_TZ3000_92chsky7": [ numEps: 2, model: "TS110F", inClusters: "0000,0004,0005,0006,0008", joinName: "Tuya Zigbee 2-Gang Dimmer module (no-neutral)" ], // '2 gang smart dimmer switch module without neutral' "_TZ3000_7ysdnebc": [ numEps: 2, model: "TS110F", inClusters: "0000,0004,0005,0003,0006,0008",joinName: "Tuya 2CH Zigbee dimmer module" ], "_TZE200_vm1gyrso": [ numEps: 3, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Tuya Zigbee 3-Gang Dimmer module" ], "_TZE200_whpb9yts": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Tuya Zigbee 1-Gang Dimmer module" ], // 'Zigbee smart dimmer' Larkkey "_TZE200_ebwgzdqq": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Tuya Zigbee 1-Gang Dimmer module" ], // Larkkey "_TZE200_9i9dt8is": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Tuya Zigbee 1-Gang Dimmer module" ], // Earda/Tuya (dimmer) EDM-1ZAA-EU "_TZE200_dfxkcots": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Tuya Zigbee 1-Gang Dimmer module" ], // Earda/Tuya (dimmer) EDM-1ZAA-EU "gq8b1uv": [ numEps: 1, model: "gq8b1uv", inClusters: "0000,0004,0005,0006,0008", joinName: "TUYATEC Zigbee smart dimmer" ], // TUYATEC Zigbee smart dimmer // "_TZ3210_ngqk6jia": [ numEps: 2, model: "TS110E", inClusters: "0005,0004,0006,0008,EF00,0000", joinName: "Lonsonho 2-gang Dimmer module"], // https://www.aliexpress.com/item/4001279149071.html "_TZ3210_zxbtub8r": [ numEps: 1, model: "TS110E", inClusters: "0004,0005,0003,0006,0008,EF00,0000", joinName: "GIRIER Dimmer module 1 ch."], // not tested "_TZ3210_lfbz816s": [ numEps: 1, model: "TS110F", inClusters: "0004,0005,0003,0006,0008,EF00,0000", joinName: "Fantem Dimmer module 1 ch."], // not tested Model ZB006-X manufactured by Fantem "_TZ3210_ebbfkvoy": [ numEps: 1, model: "TS110F", inClusters: "0004,0005,0003,0006,0008,EF00,0000", joinName: "Fantem Dimmer module 1 ch."], // not tested Model ZB006-X manufactured by Fantem "_TZE200_w4cryh2i": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee Rotary/Touch Light Dimmer" ], // https://community.hubitat.com/t/moes-zigbee-dimmer-touch/101195 "_TZE200_ip2akl4w": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee 1-Gang Dimmer module" ], // https://community.hubitat.com/t/tuya-moes-1-2-3-gang-dimmer/104596/5?u=kkossev "_TZE200_1agwnems": [ numEps: 1, model: "TS0601", inClusters: "0000,0004,0005,EF00", joinName: "MG-ZD01W 1-Gang Dimmer" ], // https://community.hubitat.com/t/zigbee-dimmer-pairing-issues/142460/5?u=kkossev OzSmartThings "_TZE200_la2c2uo9": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee 1-Gang Dimmer module" ], // not tested "_TZE200_579lguh2": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee 1-Gang Dimmer module" ], // not tested "_TZE200_fjjbhx9d": [ numEps: 2, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee 2-Gang Dimmer module" ], // https://community.hubitat.com/t/tuya-moes-1-2-3-gang-dimmer/104596/5?u=kkossev "_TZE200_drs6j6m5": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Lifud Model LF-AAZ030-0750-42" ], // https://community.hubitat.com/t/tuya-moes-1-2-3-gang-dimmer/104596/25?u=kkossev "_TZE200_fvldku9h": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Tuya Fan Switch" ] , // https://www.aliexpress.com/item/4001242513879.html "_TZE200_r32ctezx": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Lerlink T2-Z67/T2-W67 Fan Switch" ], // https://github.com/isakharov/zigbee-herdsman-converters/blob/0bffc49faf69244711677a5735f54d8dd8ea8f7c/devices/tuya.js#L4117-L4143 // https://www.aliexpress.us/item/3256804518783061.html https://github.com/Koenkk/zigbee2mqtt/issues/12793 "_TZE200_3p5ydos3": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "BSEED Zigbee Dimmer" ], // https://www.bseed.com/collections/zigbee-series/products/bseed-eu-russia-new-zigbee-touch-wifi-light-dimmer-smart-switch "_TZE200_e3oitdyu": [ numEps: 2, model: "TS0601", inClusters: "0000,0004,0005,EF00", joinName: "Moes ZigBee Dimmer Switch 2CH"], // https://community.hubitat.com/t/moes-dimmer-module-2ch/110512 "_TZ3210_k1msuvg6": [ numEps: 1, model: "TS110E", inClusters: "0004,0005,0003,0006,0008,EF00,0000", joinName: "Girier Zigbee 1-Gang Dimmer module"], // https://community.hubitat.com/t/girier-tuya-zigbee-3-0-light-switch-module-smart-diy-breaker-1-2-3-4-gang-supports-2-way-control/104546/36?u=kkossev "GLEDOPTO": [ numEps: 1, model: "GL-SD-001", inClusters: "0000,0003,0004,0005,0006,0008,1000", joinName: "Gledopto Triac Dimmer"], // "_TZ3210_pagajpog": [ numEps: 2, model: "TS110E", inClusters: "0005,0004,0006,0008,E001,0000", joinName: "Lonsonho Tuya Smart Zigbee Dimmer"], // https://community.hubitat.com/t/release-tuya-lonsonho-1-gang-and-2-gang-zigbee-dimmer-module-driver/60372/76?u=kkossev "_TZ3210_4ubylghk": [ numEps: 2, model: "TS110E", inClusters: "0004,0005,0006,0008,0300,EF00,0000", joinName: "Lonsonho Tuya Smart Zigbee Dimmer"], // https://community.hubitat.com/t/driver-support-for-tuya-dimmer-module-model-ts110e-manufacturer-tz3210-4ubylghk/116077?u=kkossev "_TZ3210_ngqk6jia": [ numEps: 1, model: "TS110E", inClusters: "0003,0005,0004,0006,0008,E001,1000,0000", joinName: "Lonsonho Smart Zigbee Dimmer"], // KK "_TZ3210_tkkb1ym8": [ numEps: 2, model: "TS110E", inClusters: "0004,0005,0003,0006,0008,EF00,0000", joinName: "Smart Zigbee Dimmer 2-gang"], // QA - Vartan - BR "_TZ3210_3mpwqzuu": [ numEps: 2, model: "TS110E", inClusters: "0005,0004,0006,0008,E001,0000", joinName: "Tuya Smart Zigbee Dimmer"], // https://community.hubitat.com/t/driver-support-for-tuya-dimmer-module-model-ts110e-manufacturer-tz3210-4ubylghk/116077/26?u=kkossev "_TZE204_hlx9tnzb": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee 1-Gang Switch Dimmer"], // "_TZE204_zenj4lxv": [ numEps: 2, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee 2-Gang Switch Dimmer"], // https://www.aliexpress.com/item/1005005870551288.html "_TZE204_1v1dxkck": [ numEps: 3, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Moes Zigbee 3-Gang Switch Dimmer"], // "_TZ3210_pagajpog": [ numEps: 2, model: "TS110E", inClusters: "0005,0004,0006,0008,E001,1000,0003,0000", joinName: "Smart Zigbee Dimmer 2-gang"], // Vartan - BR "_TZE204_o9gyszw2": [ numEps: 2, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Avatto Zigbee 2-Gang Switch Dimmer"], // https://s.click.aliexpress.com/e/_DdmDzJx https://community.hubitat.com/t/ts0601-toggle-not-working/143432?u=kkossev "_TZE200_p0gzbqct": [ numEps: 1, model: "TS0601", inClusters: "0000,0004,0005,EF00", joinName: "Moes Zigbee Rotary Dimmer"], // https://s.click.aliexpress.com/e/_DEZTclF https://community.hubitat.com/t/re-release-tuya-zigbee-dimmer-module-w-healthstatus/120180/16?u=kkossev "_TZE204_vevc4c6g": [ numEps: 1, model: "TS0601", inClusters: "0004,0005,EF00,0000", joinName: "Tuya Touch Dimmer"], // https://www.rtx24.pl/sciemniacz-dotykowy-1obw-bi-zigbee-tuya-rtx-sh-p-766.html "_TZ3210_wdexaypg": [ numEps: 2, model: "TS110E", inClusters: "0004,0005,0003,0006,0008,EF00", joinName: "Tuya Zigbee 2-Gang Dimmer"], // https://community.hubitat.com/t/driver-support-for-zigbee-model-ts110e-zigbee-manufacturer-tz3210-ngqk6jia/99817/17?u=kkossev ] def getNumEps() {return config()?.numEps ?: 1} def isParent() {return getParent() == null } def isChild() {return getParent() != null } def config() { return modelConfigs[device.getDataValue("manufacturer")] } @Field static final Map deviceProfilesV2 = [ "TS110F_DIMMER" : [ description : "TS110F Tuya Dimmers", models : ["TS110F"], fingerprints : [ [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0000,0004,0005,0006,0008", outClusters:"0019,000A", model:"TS110F", manufacturer:"_TYZB01_v8gtiaed", deviceJoinName: "Tuya Zigbee 2-Gang Dimmer module"], // '2 gang smart dimmer switch module with neutral' [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0000,0004,0005,0006,0008", outClusters:"0019,000A", model:"TS110F", manufacturer:"_TYZB01_qezuin6k", deviceJoinName: "Tuya Zigbee 1-Gang Dimmer module"], // '1 gang smart dimmer switch module with neutral' [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0000,0004,0005,0006,0008", outClusters:"0019,000A", model:"TS110F", manufacturer:"_TZ3000_ktuoyvt5", deviceJoinName: "Tuya Zigbee 1-Gang Dimmer module"], // '1 gang smart switch module without neutral' [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0000,0004,0005,0006,0008", outClusters:"0019,000A", model:"TS110F", manufacturer:"_TZ3000_92chsky7", deviceJoinName: "Tuya Zigbee 2-Gang Dimmer module (no-neutral)"], // '2 gang smart dimmer switch module without neutral' - Lonsonho ??? [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0000,0004,0005,0003,0006,0008", outClusters:"0019,000A", model:"TS110F", manufacturer:"_TZ3000_7ysdnebc", deviceJoinName: "Tuya 2CH Zigbee dimmer module"] ], deviceJoinName: "TS110F Tuya Dimmer", capabilities : ["SwitchLevel": true], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "TS110E_DIMMER" : [ description : "TS110E Tuya Dimmers", models : ["TS110E"], fingerprints : [ [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0005,0004,0006,0008,EF00,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_3mpwqzuu", deviceJoinName: "Tuya 2-gang Dimmer module"] // https://community.hubitat.com/t/driver-support-for-tuya-dimmer-module-model-ts110e-manufacturer-tz3210-4ubylghk/116077/26?u=kkossev ], deviceJoinName: "TS110E Tuya Dimmer", capabilities : ["SwitchLevel": true], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "TS110E_GIRIER_DIMMER" : [ description : "TS110E Girier Dimmers", models : ["TS110F"], fingerprints : [ [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,0003,0006,0008,EF00,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_zxbtub8r", deviceJoinName: "GIRIER Dimmer module 1 ch."], // not tested [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,0003,0006,0008,EF00,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_k1msuvg6", deviceJoinName: "Girier Zigbee 1-Gang Dimmer module"], // https://community.hubitat.com/t/girier-tuya-zigbee-3-0-light-switch-module-smart-diy-breaker-1-2-3-4-gang-supports-2-way-control/104546/36?u=kkossev ], deviceJoinName: "TS110E Girier Dimmer", capabilities : ["SwitchLevel": true], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "TS110E_LONSONHO_DIMMER" : [ // uses 0xF000 (cluster 8) for brightness control // TODO: 0, 1000 -> 1, 254 (don't go to 255!!) // (uint16) # 0xF000 reported values are 10-1000, must be converted to 0-254 => value = (value + 4 - 10) * 254 // (1000 - 10) description : "TS110E Lonsonho Dimmers", // https://github.com/zigpy/zha-device-handlers/blob/5bbe4e0c668d826baeed178e4085b98d2a5d1740/zhaquirks/tuya/ts110e.py models : ["TS110E"], fingerprints : [ [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0005,0004,0006,0008,E001,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_pagajpog", deviceJoinName: "Lonsonho Tuya Smart Zigbee Dimmer"], // https://community.hubitat.com/t/release-tuya-lonsonho-1-gang-and-2-gang-zigbee-dimmer-module-driver/60372/76?u=kkossev [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0005,0004,0006,0008,E001,1000,0003,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_pagajpog", deviceJoinName: "Smart Zigbee Dimmer 2-gang"], // Vartan - BR [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0004,0005,0003,0006,0008,EF00,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_tkkb1ym8", deviceJoinName: "Smart Zigbee Dimmer 2-gang"], // Vartan - BR - QA [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0004,0005,0006,0008,0300,EF00,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_4ubylghk", deviceJoinName: "Lonsonho Tuya Smart Zigbee Dimmer"], // https://community.hubitat.com/t/driver-support-for-tuya-dimmer-module-model-ts110e-manufacturer-tz3210-4ubylghk/116077?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0003,0005,0004,0006,0008,E001,1000,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_ngqk6jia",joinName: "Lonsonho Smart Zigbee Dimmer"], // KK [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0004,0005,0003,0006,0008,EF00,0000", outClusters:"0019,000A", model:"TS110E", manufacturer:"_TZ3210_wdexaypg", deviceJoinName: "Smart Zigbee Dimmer 2-gang"], // https://community.hubitat.com/t/driver-support-for-zigbee-model-ts110e-zigbee-manufacturer-tz3210-ngqk6jia/99817/17?u=kkossev ], deviceJoinName: "TS110E Lonsonho Dimmer", capabilities : ["SwitchLevel": true], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "TS0601_DIMMER" : [ description : "TS0601 Tuya Dimmers", models : ["TS0601"], fingerprints : [ [numEps: 3, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_vm1gyrso", deviceJoinName: "Tuya Zigbee 3-Gang Dimmer module"], [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_whpb9yts", deviceJoinName: "Tuya Zigbee 1-Gang Dimmer module"], // 'Zigbee smart dimmer' [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_ebwgzdqq", deviceJoinName: "Tuya Zigbee 1-Gang Dimmer module"], [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_9i9dt8is", deviceJoinName: "Tuya Zigbee 1-Gang Dimmer module"], [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_dfxkcots", deviceJoinName: "Tuya Zigbee 1-Gang Dimmer module"], [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_w4cryh2i", deviceJoinName: "Moes Zigbee Rotary/Touch Light Dimmer"], // https://community.hubitat.com/t/moes-zigbee-dimmer-touch/101195 [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_ip2akl4w", deviceJoinName: "Moes Zigbee 1-Gang Dimmer module"], // https://community.hubitat.com/t/tuya-moes-1-2-3-gang-dimmer/104596/5?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_1agwnems", deviceJoinName: "MG-ZD01W 1-Gang Dimmer"], // https://community.hubitat.com/t/zigbee-dimmer-pairing-issues/142460/5?u=kkossev OzSmartThings [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_la2c2uo9", deviceJoinName: "Moes Zigbee 1-Gang Dimmer module"], // not tested [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_579lguh2", deviceJoinName: "Moes Zigbee 1-Gang Dimmer module"], // not tested [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_fjjbhx9d", deviceJoinName: "Moes Zigbee 2-Gang Dimmer module"], // https://community.hubitat.com/t/tuya-moes-1-2-3-gang-dimmer/104596/5?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_drs6j6m5", deviceJoinName: "Lifud Model LF-AAZ030-0750-42"], // https://community.hubitat.com/t/tuya-moes-1-2-3-gang-dimmer/104596/25?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_3p5ydos3", deviceJoinName: "BSEED Zigbee 1-Gang Dimmer module"], // not tested [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0000,0004,0005,EF00", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_e3oitdyu", deviceJoinName: "Moes ZigBee Dimmer Switch 2CH"], // https://community.hubitat.com/t/moes-dimmer-module-2ch/110512 [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE204_hlx9tnzb", deviceJoinName: "Moes ZigBee 1-Gang Dimmer"], // https://github.com/Koenkk/zigbee-herdsman-converters/blob/23bee5ddfca1f62fc0a03d40fbf788b0b7fe2fc3/src/devices/tuya.ts#L1265 [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE204_zenj4lxv", deviceJoinName: "Moes ZigBee 2-Gang Dimmer"], // https://community.hubitat.com/t/moes-dimmer-module-2ch/110512 [numEps: 3, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE204_1v1dxkck", deviceJoinName: "Moes ZigBee 3-Gang Dimmer"], // https://github.com/Koenkk/zigbee-herdsman-converters/blob/23bee5ddfca1f62fc0a03d40fbf788b0b7fe2fc3/src/devices/tuya.ts#L1265 [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_w4cryh2i", deviceJoinName: "Moes Zigbee Rotary/Touch Light Dimmer"], // https://community.hubitat.com/t/re-release-beta-tuya-zigbee-dimmer-module-w-healthstatus/120180/16?u=kkossev [numEps: 2, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE204_o9gyszw2", deviceJoinName: "Avatto ZigBee 2-Gang Dimmer"], // https://github.com/Koenkk/zigbee2mqtt/issues/22175 [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0000,0004,0005,EF00", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_p0gzbqct", deviceJoinName: "Moes Zigbee Rotary Dimmer"], // [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE204_vevc4c6g", deviceJoinName: "Tuya touch dimmer"], // https://github.com/Koenkk/zigbee2mqtt/issues/21980 ], deviceJoinName: "TS0601 Tuya Dimmer", capabilities : ["SwitchLevel": true], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "TS0601_FAN" : [ description : "TS0601 Fan Switch", models : ["TS0601"], fingerprints : [ [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_fvldku9h", deviceJoinName: "Tuya Fan Switch"] // https://www.aliexpress.com/item/4001242513879.html ], deviceJoinName: "TS0601 Fan Switch", capabilities : ["SwitchLevel": false], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "TS0601_LERLINK_FAN" : [ description : "TS0601 LERLINK Fan Switch", models : ["TS0601"], fingerprints : [ [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"TS0601", manufacturer:"_TZE200_r32ctezx", deviceJoinName: "Lerlink T2-Z67/T2-W67 Fan Switch"] // https://www.aliexpress.us/item/3256804518783061.html https://github.com/Koenkk/zigbee2mqtt/issues/12793 https://github.com/isakharov/zigbee-herdsman-converters/blob/0bffc49faf69244711677a5735f54d8dd8ea8f7c/devices/tuya.js#L4117-L4143 ], deviceJoinName: "TS0601 LERLINK Fan Switch", capabilities : ["SwitchLevel": false], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "TS0505B_TUYA_BULB" : [ description : "TS0505B Tuya Bulb", models : ["TS0601"], fingerprints : [ [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0003,0004,0005,0006,1000,0008,0300,EF00,0000", outClusters:"0019,000A", model:"TS0505B", manufacturer:"_TZ3210_wxa85bwk", deviceJoinName: "Tuya Bulb"], // KK [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0003,0004,0005,0006,1000,0008,0300,EF00,0000", outClusters:"0019,000A", model:"TS0505B", manufacturer:"_TZ3210_r5afgmkl", deviceJoinName: "Tuya Bulb"], // https://community.hubitat.com/t/tuya-zigbee-bulb/115563?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0003,0004,0005,0006,1000,0008,0300,EF00,0000", outClusters:"0019,000A", model:"TS0505B", manufacturer:"_TZ3210_eejm8dcr", deviceJoinName: "Tuya LED Strip"], // https://community.hubitat.com/t/c8-gledopto-light-strip-controllers/114775/9?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0003,0004,0005,0006,1000,0008,0300,EF00,0000", outClusters:"0019,000A", model:"TS0505B", manufacturer:"_TZ3000_qqjaziws", deviceJoinName: "Tuya LED Strip"], // https://community.hubitat.com/t/anyone-used-this-tuya-led-strip-controller-with-success/55593/21?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0000,0003,0004,0005,0006,1000,0008,0300,EF00", outClusters:"0019,000A", model:"TS0505B", manufacturer:"_TZ3210_zexrfbzd", deviceJoinName: "Tuya Bulb"], // https://community.hubitat.com/t/zigbee-bulb-paired-as-device/107530/3?u=kkossev [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0000,0003,0004,0005,0006,1000,0008,0300,EF00", outClusters:"0019,000A", model:"TS0505B", manufacturer:"_TZ3000_cmaky9gq", deviceJoinName: "Ikuu LED Strip"] // https://community.hubitat.com/t/mercator-ikuu/70404/191?u=kkossev ], deviceJoinName: "Tuya Bulb", capabilities : ["SwitchLevel": true], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ], "OTHER_OEM_DIMMER" : [ description : "Other OEM Dimmer", models : ["gq8b1uv", "GL-SD-001"], fingerprints : [ [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"gq8b1uv", manufacturer:"gq8b1uv", deviceJoinName: "TUYATEC Zigbee smart dimmer"], // https://www.aliexpress.com/item/4001242513879.html [numEps: 1, profileId:"0104", endpointId:"01", inClusters:"0004,0005,EF00,0000", outClusters:"0019,000A", model:"GL-SD-001", manufacturer:"GLEDOPTO", deviceJoinName: "Gledopto Triac Dimmer"] // https://www.aliexpress.us/item/3256804518783061.html https://github.com/Koenkk/zigbee2mqtt/issues/12793 ], deviceJoinName: "Other OEM Dimmer", capabilities : ["SwitchLevel": false], attributes : ["healthStatus": "unknown", "powerSource": "mains"], configuration : [], preferences : [] ] ] def getDW() { return isParent() ? this : getParent() } def getModelGroup() { return getDW().state.deviceProfile ?:"UNKNOWN" } def getDeviceProfilesMap() {deviceProfilesV2.values().description as List} def isTS0601() { return getDW().getModelGroup().contains("TS0601") } def isFanController() { return getDW().getModelGroup().contains("TS0601_FAN") } def isLerlinkFanController() { return getDW().getModelGroup().contains("TS0601_LERLINK_FAN") } def isTS110E() { return getDW().getModelGroup().contains("TS110E_DIMMER") } def isGirier() { return getDW().getModelGroup().contains("TS110E_GIRIER_DIMMER") } def isLonsonho() { return getDW().getModelGroup().contains("TS110E_LONSONHO_DIMMER") } def isTuyaBulb() { return getDW().getModelGroup().contains("TS0505B_TUYA_BULB") } def isUnknown() { return getDW().getModelGroup().contains("UNKNOWN") } void parse(String description) { checkDriverVersion() if (state.stats != null) state.stats['rxCtr'] = (state.stats['rxCtr'] ?: 0) + 1 else state.stats=[:] logDebug "parse: received raw description: ${description}" if (isParent()) { def descMap = [:] try { descMap = zigbee.parseDescriptionAsMap(description) } catch (e) { logWarn "exception ${e} caught while parsing description: ${description}" } logTrace "parse: received descMap: ${descMap}" if (description.startsWith("catchall")) { logTrace "parse: catchall clusterId=${descMap?.clusterId} command=${descMap?.command} data=${descMap?.data}" if (descMap?.command == "0B") { logDebug "parse: catchall received confirmation from clusterId=${descMap?.clusterId} for command=${descMap?.command} data=${descMap?.data}" return } else if (descMap?.clusterId == "EF00") { parseTuyaCluster(descMap) } else if(descMap?.clusterId == "0000") { parseBasicCluster(descMap) descMap.remove('additionalAttrs')?.each { final Map map -> parseBasicCluster(descMap + map) } } else { logWarn "unprocessed catchall: ${description}" } sendHealthStatusEventAll('online') unschedule('deviceCommandTimeout') return } // Integer value = 0 if (descMap?.value != null && descMap?.encoding != "42") { try { value = Integer.parseInt(descMap.value, 16) } catch (e) { logWarn "exception ${e} caught while converting ${descMap?.value} to integer, encoding is ${descMap?.encoding}" } } def child = this def isFirst = true if (descMap?.endpoint != null) { child = getChildByEndpointId(descMap.endpoint) isFirst = (endpointIdToIndex(descMap.endpoint) == 0) } // sendHealthStatusEventAll('online') unschedule('deviceCommandTimeout') // if (descMap.data != null && descMap.data?.size()>=3 && descMap.data[2] == "86" && descMap.command == "01") { logDebug "Read attribute response: unsupported Attributte ${descMap.data[1] + descMap.data[0]} cluster ${descMap.clusterId}" return } switch (descMap.clusterInt) { case 0x0000: // basic cluster parseBasicCluster( descMap ) break case 0x0006: // switch state logTrace "parse: on/off cluster 0x0006 command ${descMap?.command} attribute ${descMap?.attrId} value ${value}" if (descMap?.command == "07" && descMap?.data.size() >= 1) { logDebug "parse: received Configure Reporting Response for cluster:${descMap.clusterInt} attribute ${escMap?.attrId}, data=${descMap.data} (Status: ${descMap.data[0]=="00" ? 'Success' : 'Failure'})" break } if (descMap?.command == "0B" && descMap?.data.size() >= 2) { String clusterCmd = descMap.data[0] def status = descMap.data[1] logTrace "parse: received ZCL Command Response for cluster ${descMap.clusterInt} command ${descMap?.command} attribute ${descMap?.attrId}, data=${descMap.data} (Status: ${descMap.data[1]=="00" ? 'Success' : 'Failure'})" break } if (descMap?.attrId == "0000") { if (isGirier() && descMap?.command == "01") { logDebug "parse: IGNORING command Response for cluster ${descMap.clusterInt} command ${descMap?.command} attribute ${escMap?.attrId}" } else { logTrace "on/off endpoint=${descMap?.endpoint} isFirst=${isFirst} this=${this} child=${child} value=${value}" child?.onSwitchState(value) if (isFirst && child != this) { logTrace "parse: replicating switchState in parent" onSwitchState(value) } else { logTrace "parse: isFirst=${isFirst} this=${this} child=${child} value=${value}" } } } else if (descMap?.attrId == "4001") { logDebug "On Time is ${value}" } else if (descMap?.attrId == "4002") { logDebug "Off Wait Time is ${value}" } else { logDebug "parse: unsupported attribute ${descMap?.attrId} cluster ${descMap.clusterId} command ${descMap?.command}, data=${descMap.data}" } break case 0x0008: // switch level state if (descMap?.command == "07" && descMap?.data.size() >= 1) { logDebug "parse: received Configure Reporting Response for cluster:${descMap.clusterId} , data=${descMap.data} (Status: ${descMap.data[0]=="00" ? 'Success' : 'Failure'})" break } if (descMap?.command == "0B" && descMap?.data.size() >= 2) { String clusterCmd = descMap.data[0] def status = descMap.data[1] logDebug "parse: received ZCL Command Response for cluster ${descMap.clusterId} command ${descMap?.command}, data=${descMap.data} (Status: ${descMap.data[1]=="00" ? 'Success' : 'Failure'})" break } logDebug "parse: switch level cluster 0x0008 endpoint ${descMap?.endpoint} command ${descMap?.command} attrId ${descMap?.attrId} value raw ${value})" if (descMap?.attrId == "0000" || descMap?.attrId == "F000") { if (isTuyaBulb() && descMap?.attrId == "0000") { logDebug "parse: Tuya Bulb: child.onSwitchLevel value=${value} child=${child}" } else if (isLonsonho() && descMap?.attrId == "F000") { value = (value / 10) as int } else if (descMap?.attrId == "0000") { logDebug "parse: Tuya/Girier/OEM: child.onSwitchLevel value=${value} child=${child}" } else { logDebug "parse: SKIPPING attrId ${descMap?.attrId} value raw ${value} !" // TODO !! break } if (child != null) { child?.onSwitchLevel((value) as int) } if (isFirst && child != this) { logDebug "parse: replicating switchLevel in parent" onSwitchLevel(value) } } else if (descMap?.attrId == "000F") { logInfo "Tuya options are (0x${descMap.value})" } else if (descMap?.attrId == "FC02") { //value = hexStrToUnsignedInt(descMap.value) logInfo "light type is '${TS110ELightTypeOptions.options[value]}' (0x${descMap.value})" //device.updateSetting('lightType', [value: value.toString(), type: 'enum']) } else if (descMap?.attrId == "FC03") { logInfo "minLevel is ${value} (0x${descMap.value})" //device.updateSetting('minLevel', [value: value, type: 'number']) } else if (descMap?.attrId == "FC04") { logInfo "maxLevel is ${value} (0x${descMap.value})" //device.updateSetting('maxLevel', [value: value, type: 'number']) } else { logDebug "parse: UNPROCESSED attrubute ${descMap?.attrId} switch level cluster 0x0008 command ${descMap?.command} value raw: (${value})" } break case 0x8021: logDebug "parse: received bind response, data=${descMap.data} (Sequence Number:${descMap.data[0]}, Status: ${descMap.data[1]=="00" ? 'Success' : 'Failure'})" break default : logWarn "parse: UNPROCESSED endpoint=${descMap?.endpoint} cluster=${descMap?.cluster} command=${descMap?.command} attrInt = ${descMap?.attrInt} value= ${descMap?.value} data=${descMap?.data}" break } } else { throw new Exception("parse() called incorrectly by child") } } /** * Zigbee Basic Cluster Parsing * @param descMap Zigbee message in parsed map format */ void parseBasicCluster(final Map descMap) { switch (descMap.attrInt as Integer) { case PING_ATTR_ID: // Using 0x01 read as a simple ping/pong mechanism logTrace "Tuya check-in message (attribute ${descMap.attrId} reported: ${descMap.value})" def now = new Date().getTime() if (this.state.lastTx == null) this.state.lastTx = [:] def timeRunning = now.toInteger() - (this.state.lastTx["pingTime"] ?: '0').toInteger() if (timeRunning < MAX_PING_MILISECONDS) { sendRttEvent() } else { logDebug "Tuya check-in (0x01)" } break case FIRMWARE_VERSION_ID: final String version = descMap.value ?: 'unknown' log.info "device firmware version is ${version}" updateDataValue('softwareBuild', version) break default: logDebug "zigbee received unknown Basic cluster attribute 0x${descMap.attrId} (value ${descMap.value})" break } } @Field static final int FIRMWARE_VERSION_ID = 0x4000 @Field static final int PING_ATTR_ID = 0x01 /* ----------------------------------------------------------------------------- Setting up child devices ----------------------------------------------------------------------------- */ def createChildDevices() { def numEps = getNumEps() if (numEps == 1) { numEps = 0 logDebug "createChildDevices: single channel dimmer, no child devices are needed" } else { logDebug "createChildDevices: about to delete any existing child devices: ${numEps} expected , found ${getChildDevices().size()}" } def index = getChildDevices().size() if (index == null || index == 0) { logDebug "createChildDevices: no child devices to be deleted" } else { for (int i=0; i cmds = [] if (isTS0601()) { return null } logTrace "listenChildDevices: getChildEndpointIds() = ${getChildEndpointIds()} size=${getChildEndpointIds().size()}" getChildEndpointIds().each{ endpointId -> //log.trace "endpointId = ${endpointId}" if (endpointId != null && endpointId != 0 && endpointId != 0xF2) { cmds += [ //bindings "zdo bind 0x${device.deviceNetworkId} 0x${endpointId} 0x01 0x0006 {${device.zigbeeId}} {}", "delay 200", "zdo bind 0x${device.deviceNetworkId} 0x${endpointId} 0x01 0x0008 {${device.zigbeeId}} {}", "delay 200", //reporting "he cr 0x${device.deviceNetworkId} 0x${endpointId} 0x0006 0 0x10 1 0xFFFE {}","delay 200", "he cr 0x${device.deviceNetworkId} 0x${endpointId} 0x0008 0 0x20 1 0xFFFE {}", "delay 200", ] + cmdRefresh(endpointIdToChildDni(endpointId)) } } logTrace "listenChildDevices: returning binding and reporting configuration commands: ${cmds}" return cmds } /* ----------------------------------------------------------------------------- Propagate settings changes both ways between Parent and First Child ----------------------------------------------------------------------------- */ def onChildSettingsChange(childDni, childSettings) { def i = endpointIdToIndex(childDniToEndpointId(childDni)) logInfo "updating settings for child device #${i+1} ... ${childSettings}" if (i==0) { device.updateSetting("minLevel",childSettings.minLevel) device.updateSetting("maxLevel",childSettings.maxLevel) device.updateSetting("autoOn",childSettings.autoOn) } else { logWarn "onChildSettingsChange: skipped onChildSettingsChange() for child device #${i+1}" } } def onParentSettingsChange(parentSettings) { logInfo "updating settings for the parent device ... ${parentSettings}" device.updateSetting("minLevel",parentSettings.minLevel) device.updateSetting("maxLevel",parentSettings.maxLevel) device.updateSetting("autoOn",parentSettings.autoOn) /* if (isTS0601()) { logWarn "Min/Max levels NOT changed on the parent device" } */ } /* ----------------------------------------------------------------------------- Command handlers - send Zigbee commands to the device if child, then ask parent to act on its behalf if parent, then act on endpoint 1 ----------------------------------------------------------------------------- */ // sends Zigbee commands to refresh the switch and the level def refresh() { getDW().scheduleCommandTimeoutCheck() if (state.states == null) state.states = [:] state.states["isRefresh"] = true runInMillis( REFRESH_TIMER, clearRefreshRequest, [overwrite: true]) // 3 seconds if (isParent()) { logDebug "refresh: parent ${indexToChildDni(0)}" ArrayList cmds = cmdRefresh(indexToChildDni(0)) sendZigbeeCommands(cmds) } else { logDebug "refresh: child ${device.deviceNetworkId}" parent?.doActions( parent?.cmdRefresh(device.deviceNetworkId) ) } } // sends Zigbee commands to turn the switch on def on() { getDW().scheduleCommandTimeoutCheck() setCmdTimeNow() if (isParent()) { sendZigbeeCommands(cmdSwitch(indexToChildDni(0), 1)) } else { parent?.doActions( parent?.cmdSwitch(device.deviceNetworkId, 1) ) } } // sends Zigbee commands to turn the switch off def off() { setCmdTimeNow() getDW().scheduleCommandTimeoutCheck() if (isParent()) { sendZigbeeCommands(cmdSwitch(indexToChildDni(0), 0)) } else { parent?.doActions( parent?.cmdSwitch(device.deviceNetworkId, 0) ) } } // sends Zigbee commands to toggle the switch def toggle() { setCmdTimeNow() getDW().scheduleCommandTimeoutCheck() logTrace "toggle: ... getParent()=${getParent()}" if (isParent()) { sendZigbeeCommands(cmdSwitchToggle(indexToChildDni(0))) } else { parent?.doActions( parent.cmdSwitchToggle(device.deviceNetworkId)) } } // sends Zigbee commands to set level def setLevel(level, duration=0) { setCmdTimeNow() getDW().scheduleCommandTimeoutCheck() if (settings.autoRefresh == true) { runIn(1, 'refresh') } if (isParent()) { def value = levelToValue(level) sendZigbeeCommands(cmdSetLevel(indexToChildDni(0), value, duration)) } else { def value = levelToValue(level) parent?.doActions( parent?.cmdSetLevel(device.deviceNetworkId, value, duration) ) } } // sends Zigbee commands to ping the device def ping() { ArrayList cmds getDW().scheduleCommandTimeoutCheck() // temporary disable it getDW().scheduleCommandTimeoutCheck() if (state.lastTx == null) { state.lastTx = [:] } def now = new Date().getTime() logTrace "isParent() = ${isParent()} isChild() = ${isChild()}" if (isParent()) { // parent device state.lastTx["pingTime"] = now cmds = ["he rattr 0x${device.deviceNetworkId} 0x${device.endpointId} 0x0000 0x0001 {}", "delay 200",] logDebug "ping parent: pingTime = ${state.lastTx}" } else { // child device ParentDeviceWrapper pp = getParent() state.lastTx["pingTime"] = now // set parent device states also parent.setPingTime(now) parent.setCmdTime(now) cmds = ["he rattr 0x${pp.device.deviceNetworkId} 0x${pp.device.endpointId} 0x0000 0x0001 {}", "delay 200",] logDebug "ping child: pingTime = ${state.lastTx}" } setCmdTimeNow() sendZigbeeCommands(cmds) } void setPingTime(val){ state.lastTx["pingTime"] = val } void setCmdTime(val){ state.lastTx["cmdTime"] = val } void setCmdTimeNow(){ def now = new Date().getTime() if (state.lastTx == null) { state.lastTx = [:] } state.lastTx["cmdTime"] = now if (isChild()) { parent.setCmdTime(now) } } // TODO - not working! void setState(st, index, val) { logTrace "setState ($st, $index, $val)" def str = "$st[\"$index\"]" logTrace "str=${str}" state.$str = val } def clearRefreshRequest() { if (state.states == null) {state.states = [:] }; state.states["isRefresh"] = false } def clearIsDigital() { if (state.states == null) {state.states = [:] }; state.states["isDigital"] = false } def switchDebouncingClear() { if (state.states == null) {state.states = [:] }; state.states["debounce"] = false } /* --------------------------------------------------------------------------------------------------- Hub Action (cmd) generators - only return ArrayList Zigbee commands to the calling function --------------------------------------------------------------------------------------------------- */ // returns Zigbee commands to refresh the switch and the level def cmdRefresh(String childDni) { def endpointId = childDniToEndpointId(childDni) logDebug "cmdRefresh: (childDni=${childDni} endpointId=${endpointId}) isParent()=${isParent()}" setCmdTimeNow() if (isLonsonho() || isTuyaBulb()) { return [ "he rattr 0x${device.deviceNetworkId} 0x${endpointId} 0x0006 0 {}", "delay 100", "he rattr 0x${device.deviceNetworkId} 0x${endpointId} 0x0008 0xF000 {}", "delay 100" ] } else { return [ "he rattr 0x${device.deviceNetworkId} 0x${endpointId} 0x0006 0 {}", "delay 100", "he rattr 0x${device.deviceNetworkId} 0x${endpointId} 0x0008 0 {}", "delay 100" ] } } // returns Zigbee commands to togle the switch def cmdSwitchToggle(String childDni) { def endpointId = childDniToEndpointId(childDni) def child = getChildByEndpointId(endpointId) String currentState = child.device.currentState('switch', true).value if (currentState == 'on') { return cmdSwitch(childDni, 0) + cmdRefresh(childDni) } else { return cmdSwitch(childDni, 1) + cmdRefresh(childDni) } } // returns Zigbee commands for on or off def cmdSwitch(String childDni, onOff) { ArrayList cmds = [] def endpointId = childDniToEndpointId(childDni) logTrace "cmdSwitch: childDni=${childDni} onOff=${onOff} endpointId=${endpointId}" setCmdTimeNow() onOff = onOff ? "1" : "0" if (isTS0601()) { def dpValHex = zigbee.convertToHexString(onOff as int, 2) def cmd = childDni[-2..-1] def dpCommand = cmd == "01" ? "01" : cmd == "02" ? "07" : cmd == "03" ? "0F" : null cmds = sendTuyaCommand(dpCommand, DP_TYPE_BOOL, dpValHex) logTrace "cmdSwitch: sending cmdSwitch command=${dpCommand} value=${onOff} ($dpValHex) cmds=${cmds}" } else { cmds = ["he cmd 0x${device.deviceNetworkId} 0x${endpointId} 0x0006 ${onOff} {}"] logTrace "cmdSwitch: sending cmdSwitch endpointId=${endpointId} value=${onOff} cmds=${cmds}" } return cmds } // returns Zigbee commands for level control, depending on the device profile, as per the already scaled value def cmdSetLevel(String childDni, value, duration) { def endpointId = childDniToEndpointId(childDni) value = value.toInteger() value = value < 1 ? 0 : value duration = (duration * 10).toInteger() def child = getChildByEndpointId(endpointId) logTrace "cmdSetLevel: child=${child} childDni=${childDni} value=${value} duration=${duration}" setCmdTimeNow() ArrayList cmdsTuya = [] ArrayList cmdTS011 = [] if (isTS0601()) { value = (value*10) as int def dpValHex = zigbee.convertToHexString(value as int, 8) def cmd = childDni[-2..-1] def dpCommand = cmd == "01" ? "02" : cmd == "02" ? "08" : cmd == "03" ? "10" : null if (isFanController()) { dpCommand = "04" dpValHex = zigbee.convertToHexString((value/10) as int, 8) } else if (isLerlinkFanController()) { dpCommand = "03" dpValHex = zigbee.convertToHexString((value/10) as int, 8) // TODO - check if the dpType is VALUE or ENUM? } logDebug "cmdSetLevel: TS0601: sending cmdSetLevel command=${dpCommand} value=${value} ($dpValHex)" cmdsTuya = sendTuyaCommand(dpCommand, DP_TYPE_VALUE, dpValHex) if (child?.isAutoOn() && (device.currentState('switch', true)?.value ?: "") != 'on') { logDebug "cmdSetLevel: AutoOn: sending cmdSwitch on for switch #${endpointId}" cmdsTuya += cmdSwitch(childDni, 1) } logDebug "cmdSetLevel: TS0601: sending cmdsTuya=${cmdsTuya}" return cmdsTuya } else if (isLonsonho()) { // Lonsonho brightness values are * 10 // unsigned 16 bit int value = value * 10 cmdTS011 = [ "he cmd 0x${device.deviceNetworkId} 0x${endpointId} 0x0008 0xF0 { 0x${intTo16bitUnsignedHex(value)} 0x${intTo16bitUnsignedHex(duration)} }", ] logDebug "LONSONHO: cmdSetLevel: sending value ${value} cmdTS011=${cmdTS011}" } else if ( isTuyaBulb()) { cmdTS011 = [ "he cmd 0x${device.deviceNetworkId} 0x${endpointId} 0x0008 4 { 0x${intTo8bitUnsignedHex(value)} 0x${intTo16bitUnsignedHex(duration)} }", ] logDebug "LONSONHO: cmdSetLevel: sending value ${value} cmdTS011=${cmdTS011}" } else { // all other dimmers, different that EF00 and Lonsonho cmdTS011 = [ "he cmd 0x${device.deviceNetworkId} 0x${endpointId} 0x0008 4 { 0x${intTo8bitUnsignedHex(value)} 0x${intTo16bitUnsignedHex(duration)} }", ] logDebug "GIRIER/others: cmdSetLevel: sending value ${value} cmdTS011=${cmdTS011}" } if (child?.isAutoOn()) { cmdTS011 += "he cmd 0x${device.deviceNetworkId} 0x${endpointId} 0x0006 1 {}" } logDebug "cmdSetLevel: sending cmdTS011=${cmdTS011}" return cmdTS011 } /* ----------------------------------------------------------------------------- Parent only code ----------------------------------------------------------------------------- */ // replaced with sendZigbeeCommands def doActions(List cmds) { if (isParent()) { sendZigbeeCommands( cmds ) logDebug "doActions: Sending actions: ${cmds}" } else { throw new Exception("doActions() called incorrectly by child") } } /* ----------------------------------------------------------------------------- Tuya cluster EF00 specific code ----------------------------------------------------------------------------- */ def tuyaBlackMagic() { def ep = safeToInt(state.destinationEP ?: 01) if (ep==null || ep==0) ep = 1 return zigbee.readAttribute(0x0000, [0x0004, 0x000, 0x0001, 0x0005, 0x0007, 0xfffe], [destEndpoint :ep], delay=200) } def parseTuyaCluster( descMap ) { if (descMap.clusterId != "EF00") { return null } if (descMap.command == "0B") { logDebug "parseTuyaCluster: Tuya command 0x0B data=${descMap.data}" return null } if (descMap.command == "24") { logDebug "parseTuyaCluster: Tuya Time Sync request data=${descMap.data}" def offset = 0 try { offset = location.getTimeZone().getOffset(new Date().getTime()) } catch(e) { logWarn "Cannot resolve current location. please set location in Hubitat location setting. Setting timezone offset to zero" } def cmds = zigbee.command(0xEF00, 0x24, "0008" +zigbee.convertToHexString((int)(now()/1000),8) + zigbee.convertToHexString((int)((now()+offset)/1000), 8)) logDebug "parseTuyaCluster: sending time data : ${cmds}" cmds.each{ sendHubCommand(new hubitat.device.HubAction(it, hubitat.device.Protocol.ZIGBEE)) } return null } def cmd = descMap.data[2] def value = getAttributeValue(descMap.data) switch (cmd) { case "01" : // Switch1 handleTuyaClusterSwitchCmd(cmd, value) break case "02" : // Brightness1 (switch level state) or countdown for LerlinkFanController if (isLerlinkFanController()) { logDebug "parseTuyaCluster: received: LerlinkFanController countdown cmd=${cmd} value=${value}" if (value != 0 ) { stopCountdown(cmd, value) } } else { logDebug "parseTuyaCluster: received: Tuya brighntness(level) cmd=${cmd} value=${value}" handleTuyaClusterBrightnessCmd(cmd, value/10 as int) } break case "03" : // Minimum brightness1 or fan speed for LerlinkFanController if (isLerlinkFanController()) { logDebug "parseTuyaCluster: received: LerlinkFanController cmd=${cmd} value=${value}" handleTuyaClusterBrightnessCmd(cmd, value as int) } else { def switchNumber = "01" logDebug "parseTuyaCluster: received: minimum brightness switch#${switchNumber} is ${value/10 as int} (raw=${value})" handleTuyaClusterMinBrightnessCmd(cmd, value/10 as int) } break case "04" : // (04) level for _TZE200_fvldku9h ; Tuya type of light source for all others? if (isFanController()) { handleTuyaClusterBrightnessCmd(cmd, value as int) } else { //logDebug "parseTuyaCluster: received: Tuya type of light source cmd=${cmd} value=${value}" // (LED, halogen, incandescent) String modeName = TS110ELightTypeOptions.options[value as int] String description = "Light type is $modeName" device.updateSetting('lightType', [value: value.toString(), type: 'enum']) sendEvent(name:'lightType', value: modeName, descriptionText: description, type: 'physical') logInfo "$description" } break case "05" : // Maximum brightness1 def switchNumber = "01" logDebug "parseTuyaCluster: received: maximum brightness switch#${switchNumber} is ${value/10 as int} (raw=${value})" handleTuyaClusterMaxBrightnessCmd(cmd, value/10 as int) break case "06" : // Countdown1 def switchNumber = "01" logDebug "Countdown ${switchNumber} is ${value}s" if (value != 0 ) { stopCountdown(cmd, value) } break case "07" : // Switch2 handleTuyaClusterSwitchCmd(cmd, value) break case "08" : // Brightness2 logDebug "parseTuyaCluster: received: Tuya brighntness(level) cmd=${cmd} value=${value}" handleTuyaClusterBrightnessCmd(cmd, value/10 as int) break case "09" : // Minimum brightness2 def switchNumber = "02" logDebug "parseTuyaCluster: received: minimum brightness switch#${switchNumber} is ${value/10 as int} (raw=${value})" handleTuyaClusterMinBrightnessCmd(cmd, value/10 as int) break case "0A" : // (10) // TS0601 Moes dimmer logDebug "parseTuyaCluster: Unknown Tuya dp= ${cmd} fn=${value}" break case "0B" : // (11) Maximum brightness2 or power-on status for LerlinkFanController if (isLerlinkFanController()) { logDebug "parseTuyaCluster: received: LerlinkFanController power-on status cmd=${cmd} value=${value}" String modeName = TS0601PowerOnOptions.options[value as int] String description = "Power-On mode is $modeName" device.updateSetting('powerOnMode', [value: value.toString(), type: 'enum']) sendEvent(name:'powerOnMode', value: modeName, descriptionText: description, type: 'physical') logInfo "$description" } else { def switchNumber = "02" logDebug "parseTuyaCluster: received: maximum brightness switch#${switchNumber} is ${value/10 as int} (raw=${value})" handleTuyaClusterMaxBrightnessCmd(cmd, value/10 as int) } break case "0C" : // (12) Countdown2 def switchNumber = "02" logDebug "Countdown ${switchNumber} is ${value}s" if (value != 0 ) { stopCountdown(cmd, value) } break case "0E" : // (14) //logInfo "Power-on Status Setting is ${value}" String modeName = TS0601PowerOnOptions.options[value as int] String description = "Power-On mode is $modeName" device.updateSetting('powerOnMode', [value: value.toString(), type: 'enum']) sendEvent(name:'powerOnMode', value: modeName, descriptionText: description, type: 'physical') logInfo "$description" break case "0F" : // (15) Switch3 handleTuyaClusterSwitchCmd(cmd, value) break case "10" : // (16) Brightness3 logDebug "parseTuyaCluster: received: Tuya brighntness(level) cmd=${cmd} value=${value}" handleTuyaClusterBrightnessCmd(cmd, value/10 as int) break case "11" : // (17) Minimum brightness3 def switchNumber = "03" logDebug "parseTuyaCluster: received: minimum brightness switch#${switchNumber} is ${value/10 as int} (raw=${value})" handleTuyaClusterMinBrightnessCmd(cmd, value/10 as int) break case "12" : // (18) logDebug "parseTuyaCluster: Unknown Tuya dp= ${cmd} fn=${value}" break case "13" : // (19) Maximum brightness3 def switchNumber = "03" logDebug "parseTuyaCluster: received: maximum brightness switch#${switchNumber} is ${value/10 as int} (raw=${value})" handleTuyaClusterMaxBrightnessCmd(cmd, value/10 as int) break case "14" : // (20) Countdown3 def switchNumber = "03" logDebug "Countdown ${switchNumber} is ${value}s" if (value != 0 ) { stopCountdown(cmd, value) } break case "15" : // (21) String modeName = TS0601LEDOptions.options[value as int] String description = "LED mode is $modeName" device.updateSetting('ledMode', [value: value.toString(), type: 'enum']) sendEvent(name:'ledMode', value: modeName, descriptionText: description, type: 'physical') logInfo "$description" break case "1A" : // (26) logInfo "Switch backlight ${value}" break case "28" : // (40) // TS0601 Moes dimmer logDebug "parseTuyaCluster: Unknown Tuya dp= ${cmd} fn=${value}" break case "40" : // (64) logDebug "parseTuyaCluster: Unknown Tuya dp= ${cmd} fn=${value}" break default : logWarn "parseTuyaCluster: UNHANDLED Tuya cmd=${cmd} value=${value}" break } } void stopCountdown(cmd, value) { logWarn "stopping Countdown cmd=${cmd} value=${value}" def dpValHex = zigbee.convertToHexString(0, 8) sendZigbeeCommands(sendTuyaCommand(cmd, DP_TYPE_VALUE, dpValHex)) } def parseBasicCluster( descMap ) { switch (descMap.attrId) { case "0001" : logDebug "parseBasicCluster: Tuya check-in ${descMap.attrId} (${descMap.value})" break case "0004" : // attrInt = 4 value= _TZE200_vm1gyrso data=null logDebug "parseBasicCluster: Tuya check-in ${descMap.attrId} (${descMap.value})" break default : logWarn "parseBasicCluster: unprocessed Basic cluster endpoint=${descMap?.endpoint} cluster=${descMap?.cluster} command=${descMap?.command} attrInt = ${descMap?.attrInt} value= ${descMap?.value} data=${descMap?.data}" break } } def handleTuyaClusterSwitchCmd(cmd,value) { def switchNumber = cmd == "01" ? "01" : cmd == "07" ? "02" : cmd == "0F" ? "03" : null logInfo "Switch ${switchNumber} is ${value==0 ? "off" : "on"}" if (getNumEps() == 1) { onSwitchState(value) } else { def child = getChildByEndpointId(switchNumber) def isFirst = 0 == endpointIdToIndex(switchNumber) child?.onSwitchState(value) if (isFirst && child != this) { logTrace "handleTuyaClusterSwitchCmd: Replicating switchState in parent" onSwitchState(value) } } } def handleTuyaClusterBrightnessCmd(cmd, value) { def switchNumber = cmd == "02" ? "01" : cmd == "08" ? "02" : cmd == "10" ? "03" : "01" scaledValue = valueToLevel(value) logInfo "Brightness ${switchNumber} is ${scaledValue}% (${value})" if (getNumEps() == 1) { onSwitchLevel(value) } else { def child = getChildByEndpointId(switchNumber) def isFirst = 0 == endpointIdToIndex(switchNumber) child?.onSwitchLevel(value) if (isFirst && child != this) { logTrace "handleTuyaClusterBrightnessCmd: Replicating switchLevel in parent" onSwitchLevel(value) } } } def handleTuyaClusterMinBrightnessCmd(cmd, value) { if (isOzSmartThings()) { logDebug "handleTuyaClusterMinBrightnessCmd: Ignoring minBrightness ${value} for OzSmartThings" return } def switchNumber = cmd == "03" ? "01" : cmd == "09" ? "02" : cmd == "11" ? "03" : null if (getNumEps() == 1) { device.updateSetting("minLevel", [value: value , type:"number"]) logInfo "minLevel parameter was updated to ${value}%" } else { def child = getChildByEndpointId(switchNumber) logDebug "handleTuyaClusterMinBrightnessCmd: cmd=${cmd} switchNumber=${switchNumber} child = ${child}" def isFirst = 0 == endpointIdToIndex(switchNumber) child?.updateSetting("minLevel", [value: value , type:"number"]) logInfo "minLevel parameter for switch #${switchNumber} was updated to ${value}%" if (isFirst && child != this) { logDebug "handleTuyaClusterMinBrightnessCmd: Replicating minBrightness in parent" device.updateSetting("minLevel", [value: value , type:"number"]) } } } def handleTuyaClusterMaxBrightnessCmd(cmd, value) { if (isOzSmartThings()) { logDebug "handleTuyaClusterMaxBrightnessCmd: Ignoring maxBrightness ${value} for OzSmartThings" return } def switchNumber = cmd == "05" ? "01" : cmd == "0B" ? "02" : cmd == "13" ? "03" : null if (getNumEps() == 1) { device.updateSetting("maxLevel", [value: value , type:"number"]) logInfo "maxLevel parameter was updated to ${value}%" } else { def child = getChildByEndpointId(switchNumber) logDebug "handleTuyaClusterMaxBrightnessCmd: child = ${child}" def isFirst = 0 == endpointIdToIndex(switchNumber) child?.updateSetting("maxLevel", [value: value , type:"number"]) logInfo "maxLevel parameter for switch #${switchNumber} was updated to ${value}%" if (isFirst && child != this) { logDebug "handleTuyaClusterMaxBrightnessCmd: Replicating maxBrightness in parent" device.updateSetting("maxLevel", [value: value , type:"number"]) } } } private int getAttributeValue(ArrayList _data) { int retValue = 0 try { if (_data.size() >= 6) { int dataLength = zigbee.convertHexToInt(_data[5]) as Integer int power = 1; for (i in dataLength..1) { retValue = retValue + power * zigbee.convertHexToInt(_data[i+5]) power = power * 256 } } } catch ( e ) { logWarn "Exception caught while parsing Tuya data : ${_data}" } return retValue } private sendTuyaCommand(int dp, int dpType, int fnCmd, int fnCmdLength) { def ep = safeToInt(state.destinationEP) if (ep==null || ep==0) ep = 1 def dpHex = zigbee.convertToHexString(dp, 2) def dpTypeHex = zigbee.convertToHexString(dpType, 2) def fnCmdHex = zigbee.convertToHexString(fnCmd, fnCmdLength) logDebug("sendTuyaCommand: dp=0x${dpHex}, dpType=0x${dpTypeHex}, fnCmd=0x${fnCmdHex}, fnCmdLength=${fnCmdLength}") def message = (randomPacketId().toString() + dpHex + dpTypeHex + zigbee.convertToHexString((fnCmdLength / 2) as int, 4) + fnCmdHex) logTrace("sendTuyaCommand: message=${message}") zigbee.command(CLUSTER_TUYA, ZIGBEE_COMMAND_SET_DATA, [destEndpoint :ep], message) } private randomPacketId() { return zigbee.convertToHexString(new Random().nextInt(65536), 4) } String getEventType() { if (state.lastTx == null) state.lastTx = [:] def timeElapsed = now().toInteger() - (state.lastTx["cmdTime"] ?: '0').toInteger() return (timeElapsed <= MAX_PING_MILISECONDS) ? "digital" : "physical" } /* ----------------------------------------------------------------------------- Child only code ----------------------------------------------------------------------------- */ def onSwitchState(value) { def map = [:] if (state.stats != null) state.stats['switchCtr'] = (state.stats['switchCtr'] ?: 0) + 1 else state.stats=[:] def valueText = value == 0 ? "off" : "on" map.name = "switch" map.value = valueText map.type = getEventType() if (state.states == null) { state.states = [:] } boolean isRefresh = state.states["isRefresh"] ?: false if (isRefresh == true) { map.descriptionText = "${device.displayName} is ${map.value} [Refresh]" map.isStateChange = true } else { map.descriptionText = "${device.displayName} was turned ${map.value} [${map.type}]" } logInfo "${map.descriptionText}" //logInfo "was turned ${valueText} [${getEventType()}]" sendEvent(map) //sendEvent(name: map.name, value: valueText, descriptionText: "${device.displayName} was turned ${valueText}", type: getEventType(), unit: null) } def onSwitchLevel(value) { def map = [:] if (state.stats != null) state.stats['levelCtr'] = (state.stats['levelCtr'] ?: 0) + 1 else state.stats=[:] def level = valueToLevel(safeToInt(value)) map.name = "level" map.value = level map.unit = "%" map.type = getEventType() if (state.states == null) { state.states = [:] } boolean isRefresh = state.states["isRefresh"] ?: false if (isRefresh == true) { map.descriptionText = "${device.displayName} level is ${map.value} [Refresh]" map.isStateChange = true } else { map.descriptionText = "${device.displayName} level was set to ${map.value} [${map.type}]" } logTrace "onSwitchLevel: Value=${value} level=${level} (value=${value})" logInfo "${map.descriptionText}" //logInfo "was set to ${level}% [${getEventType()}]" sendEvent(map) //sendEvent(name:"level", value: level, descriptionText:"${device.displayName} was set ${level}%", type: getEventType(), unit: "%") } /* ----------------------------------------------------------------------------- Parent only helper functions ----------------------------------------------------------------------------- */ @Field static def childDniPattern = ~/^([0-9A-Za-z]+)-([0-9A-Za-z]+)$/ // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - // mappings between index, endpointId and childDni // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - def indexToEndpointId(i) { return intTo8bitUnsignedHex(i+1) } def endpointIdToIndex(i) { //log.trace "endpointIdToIndex i=${i}" return Integer.parseInt(i,16) - 1 } def endpointIdToChildDni(endpointId) { //log.trace "endpointIdToChildDni ${endpointId} = ${device.deviceNetworkId} - ${endpointId}" //def childDni = "${device.deviceNetworkId}-${endpointId}" //log.trace "childDni = ${childDni}" return "${device.deviceNetworkId}-${endpointId}" } def indexToChildDni(i) { //log.trace "indexToChildDni(${i}): ${endpointIdToChildDni(indexToEndpointId(i))}" return endpointIdToChildDni(indexToEndpointId(i)) } def childDniToEndpointId(childDni) { def match = childDni =~ childDniPattern logTrace "childDniToEndpointId: childDni=${childDni} childDniPattern=${childDniPattern} match[0][1]=${match[0][1]} match[0][2]=${match[0][2]} device.deviceNetworkId=${device.deviceNetworkId} match=${match}" if (match) { // if (match[0][1] == device.deviceNetworkId) { return match[0][2] // } } logTrace "childDniToEndpointId: childDni=${childDni} childDniPattern=${childDniPattern} match[0][1]=${match[0][1]} match[0][2]=${match[0][2]} device.deviceNetworkId=${device.deviceNetworkId} match=${match}" //return null match[0][2] } def childDnisToEndpointIds(List childDnis) { return childDnis.collect{cDni -> childDniToEndpointId(cDni)} } // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - // retrieving children, or retrieving parent if no children and endpointId // is first index // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - def getChildByEndpointId(endpointId) { logTrace "getChildByEndpointId endpointId=${endpointId}" if (endpointId == null) return this if (endpointIdToIndex(endpointId) == 0 && getChildDevices().size() == 0) { logTrace "getChildByEndpointId returning this: ${this}" return this } else { def cd = getChildDevice(endpointIdToChildDni(endpointId)) logTrace "getChildByEndpointId(${endpointId}) returning getChildDevice: ${cd} (childDNI=${endpointIdToChildDni(endpointId)})" if (cd == null) { // try obtaining the child device from the list ... in case the parent DNI was changed! cd = getChildDevices()[(endpointId as int) -1] logTrace "parent DNI was changed... cd=${cd}" } return cd } } def getChildEndpointIds() { if (getChildDevices().size() == 0) { //logDebug "getChildEndpointIds() : no childs" return [getDestinationEP()/*device.endpointId*/] } else { //logDebug "getChildEndpointIds() : size = ${getChildDevices().size()}" return getChildDevices().collect{childDniToEndpointId(it.getDni())} } } private String getChildId(childDevice) { return childDevice.deviceNetworkId.substring(childDevice.deviceNetworkId.length() - 2) } /* ----------------------------------------------------------------------------- Child only helper functions ----------------------------------------------------------------------------- */ def getDni() { return device.deviceNetworkId } def isAutoOn() { return settings.autoOn } def levelToValue(BigDecimal level) { return levelToValue(level.toInteger()) } // converts Hubitat level 0..100 to device brightness level ( 0..255, 0..100 depending on the device profile) def levelToValue(Integer level) { if (level == 0) { return 0 // skip the scaling to enable auto off! } def mult = 1.0F if (isTS0601()) {// ? 1.0 : 2.55 mult = 1.0 } else if (isLonsonho()) { mult = 1.0 } else { // including isTuyaBulb() mult = 2.55 } Integer minLevel100 = Math.round((settings.minLevel ?: DEFAULT_MIN_LEVEL) * mult) Integer maxLevel100 = Math.round((settings.maxLevel ?: DEFAULT_MAX_LEVEL) * mult) def reScaled = scaleBetween(level,minLevel100, maxLevel100, 0, 100) logTrace "levelToValue: level=${level} reScaled=${reScaled} (mult=${mult}, minLevel100=${minLevel100}, maxLevel100=${maxLevel100})" return reScaled } def valueToLevel(BigDecimal value) { return valueToLevel(value.toInteger()) } // converts device brightness value 0..255 to Hubitat re-scaled level 0..100 // # 0xF000 reported values are 10-1000 -> divided by 10 = 1-100 def valueToLevel(Integer value) { def mult = 1.0F if (isTS0601()) {// ? 1.0 : 2.55 mult = 1.0 } else if (isLonsonho()) { mult = 1.0 } else { // including isTuyaBulb() mult = 2.55 } Integer minValue255 = Math.round((settings.minLevel ?: DEFAULT_MIN_LEVEL) * mult) Integer maxValue255 = Math.round((settings.maxLevel ?: DEFAULT_MAX_LEVEL) * mult) //log.trace "mult=${mult}, minValue255=${minValue255}, maxValue255=${maxValue255}" if (value < minValue255) value = minValue255 if (value > maxValue255) value = maxValue255 def reScaled = rescale(value, minValue255, maxValue255, 0, 100) logTrace "valueToLevel: raw value:${value} reScaled=${reScaled} (isParent=${isParent()}, isTS0601=${isTS0601()})" return reScaled } /* ----------------------------------------------------------------------------- Standard handlers ----------------------------------------------------------------------------- */ def getDeviceInfo() { return "model=${getDW().device.getDataValue('model')} manufacturer=${getDW().device.getDataValue('manufacturer')} destinationEP=${state.destinationEP ?: UNKNOWN} deviceProfile=${state.deviceProfile ?: UNKNOWN}" } // will be the first function called just once when paired as a new device. Not called again on consequent re-pairings ! def installed() { logDebug "installed() ... model=${device.getDataValue('model')} manufacturer=${device.getDataValue('manufacturer')}" sendEvent(name: 'level', value: 0, unit: '%') sendEvent(name: 'switch', value: 'off') sendEvent(name: 'healthStatus', value: 'unknown') initializeVars( fullInit = true ) // TuyaBlackMagic + create child devices initialized() } def init() { installed() } // called every time the device is paired to the HUB (both as new or as an existing device) def configure() { logDebug "configure() ..." setDestinationEP() checkDriverVersion() if (state.deviceProfile == null) { setDeviceNameAndProfile() } else { logInfo "the selected ${state.deviceProfile} device profile was not changed!" } updated() } void getAllProperties() { log.trace 'Properties:' device.properties.each { it-> log.debug it } log.trace 'Settings:' settings.each { it-> log.debug "${it.key} = ${it.value}" // https://community.hubitat.com/t/how-do-i-get-the-datatype-for-an-app-setting/104228/6?u=kkossev } log.trace 'Done' } // delete all Preferences void deleteAllSettings() { settings.each { it-> log.debug "deleting ${it.key}" //this.removeSetting("${it.key}") device.removeSetting("${it.key}") } logInfo "All settings (preferences) DELETED" } // delete all attributes void deleteAllCurrentStates() { device.properties.supportedAttributes.each { it-> log.debug "deleting $it" device.deleteCurrentState("$it") } logInfo "All current states (attributes) DELETED" } // delete all State Variables void deleteAllStates() { state.each { it-> log.debug "deleting state ${it.key}" } state.clear() logInfo "All States DELETED" } void deleteAllScheduledJobs() { unschedule() logInfo "All scheduled jobs DELETED" } def loadAllDefaults() { logWarn "loadAllDefaults() !!!" deleteAllSettings() deleteAllCurrentStates() deleteAllScheduledJobs() deleteAllStates() } // called on hub startup if driver specifies capability "Initialize" (otherwise is not required or automatically called if present) def initialize() { log.info "initialize() ... ${getDeviceInfo()}" loadAllDefaults() initializeVars( fullInit = true ) // TuyaBlackMagic + create child devices initialized() configure() } // called from configure() def setDestinationEP() { def ep = device.getEndpointId() if (ep != null && ep != 'F2') { this.state.destinationEP = ep logDebug "setDestinationEP() destinationEP = ${state.destinationEP}" } else { logWarn "setDestinationEP() Destination End Point not found or invalid(${ep}), activating the F2 bug patch!" this.state.destinationEP = "01" // fallback EP } } def getDestinationEP() { return state.destinationEP ?: device.endpointId ?: "01" } def resetStats() { state.stats = [:] state.states = [:] state.lastRx = [:] state.lastTx = [:] // state.health = [:] state.stats["rxCtr"] = 0 state.stats["txCtr"] = 0 // state.states["isDigital"] = false state.states["isRefresh"] = false // state.health["offlineCtr"] = 0 // state.health["checkCtr3"] = 0 } void initializeVars( boolean fullInit = false ) { log.info "InitializeVars( fullInit = ${fullInit} )..." if (fullInit == true) { /* settings = [:] */ // exception when copying settings to the child devices! // use clearSetting(key) unschedule() state.clear() resetStats() device.deleteCurrentState() state.driverVersion = driverVersionAndTimeStamp() } if (state.stats == null) { state.stats = [:] } // if (state.states == null) { state.states = [:] } if (state.lastRx == null) { state.lastRx = [:] } if (state.lastTx == null) { state.lastTx = [:] } if (state.lastTx["cmdTime"] == null) state.lastTx["cmdTime"] = now() if (this.state.lastTx["pingTime"] == null) this.state.lastTx["pingTime"] = now() // if (state.health == null) { state.health = [:] } if (fullInit == true || state.deviceProfile == null) { setDeviceNameAndProfile() } if (fullInit == true || settings.logEnable == null) device.updateSetting("logEnable", [value: DEFAULT_DEBUG_OPT, type: 'bool'] ) if (fullInit == true || settings.traceEnable == null) device.updateSetting("traceEnable", [value: false, type: 'bool']) if (fullInit == true || settings.txtEnable == null) device.updateSetting("txtEnable", [value: true, type: 'bool']) if (fullInit == true || settings?.minLevel == null) device.updateSetting("minLevel", [value:DEFAULT_MIN_LEVEL, type:"number"]) if (fullInit == true || settings?.maxLevel == null) device.updateSetting("maxLevel", [value:DEFAULT_MAX_LEVEL, type:"number"]) if (fullInit == true || settings?.healthCheckInterval == null) device.updateSetting('healthCheckInterval', [value: HealthcheckIntervalOpts.defaultValue.toString(), type: 'enum']) if (fullInit == true) { device.updateSetting('ledMode', [value: null, type: 'enum'])} // no ledMode by default! if (fullInit == true) { device.updateSetting('powerOnMode', [value: null, type: 'enum'])} // no powerOnMode by default! if (fullInit == true) { device.updateSetting('lightType', [value: null, type: 'enum'])} // no lightType by default! } // will be called when user selects Save Preferences def updated() { logDebug "updated() ... ${getDeviceInfo()}" unschedule() checkDriverVersion() if (settings?.logEnable) { logTrace settings runIn(86400, logsOff) } if (isParent()) { int interval = (settings.healthCheckInterval as Integer) ?: 0 if (interval > 0) { log.info "scheduling health check every ${interval} minutes" scheduleDeviceHealthCheck(interval) } } else { logDebug "skipping the health check for a child device" } // version 0.3.1 if (settings?.forcedProfile != null) { logDebug "state.deviceProfile=${state.deviceProfile}, settings.forcedProfile=${settings?.forcedProfile}, getProfileKey()=${getProfileKey(settings?.forcedProfile)}" if (getProfileKey(settings?.forcedProfile) != state.deviceProfile) { logWarn "changing the device profile from ${state.deviceProfile} to ${getProfileKey(settings?.forcedProfile)}" state.deviceProfile = getProfileKey(settings?.forcedProfile) logInfo "press F5 to refresh the page" } } else { logDebug "forcedProfile is not set" } // if (isTS0601()) { ArrayList cmdsTuya = [] def cmd = "01" def eps = getNumEps() logDebug "config().numEps = ${eps}" if (eps > 1) { if (isParent()) { cmd = "01" logInfo "### updating the settings for the ${eps} gangs device - ${device.getDataValue("manufacturer")} - FIRST CHANNEL ONLY" } else { logTrace "this.device.getData() = ${this.device.getData()}" cmd = this.device.getData().componentName[-2..-1] logInfo "### updating settings for child device ${this.device.getData().componentName} ... device #${cmd}" } } else { // single EP device logInfo "### updating settings for device ${device.getDataValue("manufacturer")}" } // minLevel Integer value = Math.round(this.minLevel * 10) def dpValHex = zigbee.convertToHexString(value as int, 8) logDebug "updated() minLevel value = ${this.minLevel} (raw=$value)" def dpCommand = cmd == "01" ? "03" : cmd == "02" ? "09" : cmd == "03" ? "11" : null logDebug "sending minLevel command=${dpCommand} value=${value} ($dpValHex)" if (isParent()) cmdsTuya += sendTuyaCommand(dpCommand, DP_TYPE_VALUE, dpValHex) else cmdsTuya += parent?.sendTuyaCommand(dpCommand, DP_TYPE_VALUE, dpValHex) // maxLevel value = Math.round(this.maxLevel * 10) dpValHex = zigbee.convertToHexString(value as int, 8) logDebug "updated() maxLevel value = ${this.maxLevel} (raw=$value)" dpCommand = cmd == "01" ? "05" : cmd == "02" ? "0B" : cmd == "03" ? "13" : null logDebug "sending maxLevel command=${dpCommand} value=${value} ($dpValHex)" if (isParent()) cmdsTuya += sendTuyaCommand(dpCommand, DP_TYPE_VALUE, dpValHex) else cmdsTuya += parent?.sendTuyaCommand(dpCommand, DP_TYPE_VALUE, dpValHex) // lightType if (settings.lightType != null) { value = settings.lightType as int dpValHex = zigbee.convertToHexString(value as int, 2) logDebug "updated() sending lightType value ${value} (TS110ELightTypeOptions.options[value as int])" dpCommand = "04" if (isParent()) cmdsTuya += sendTuyaCommand(dpCommand, DP_TYPE_ENUM, dpValHex) else cmdsTuya += parent?.sendTuyaCommand(dpCommand, DP_TYPE_ENUM, dpValHex) } // powerOnMode if (settings.powerOnMode != null) { value = settings.powerOnMode as int dpValHex = zigbee.convertToHexString(value as int, 2) logDebug "updated() sending powerOnMode value ${value} (TS0601PowerOnOptions.options[value as int])" if (isLerlinkFanController()) { dpCommand = "0B" } else { dpCommand = "0E" } if (isParent()) cmdsTuya += sendTuyaCommand(dpCommand, DP_TYPE_ENUM, dpValHex) else cmdsTuya += parent?.sendTuyaCommand(dpCommand, DP_TYPE_ENUM, dpValHex) } // ledMode if (settings.ledMode != null) { value = settings.ledMode as int dpValHex = zigbee.convertToHexString(value as int, 2) logDebug "updated() sending ledMode value ${value} (TS0601LEDOptions.options[value as int])" dpCommand = "15" if (isParent()) cmdsTuya += sendTuyaCommand(dpCommand, DP_TYPE_ENUM, dpValHex) else cmdsTuya += parent?.sendTuyaCommand(dpCommand, DP_TYPE_ENUM, dpValHex) } // hubitat.device.HubMultiAction allActions = new hubitat.device.HubMultiAction() cmdsTuya.each { allActions.add(new hubitat.device.HubAction(it, hubitat.device.Protocol.ZIGBEE)) } sendHubCommand(allActions) } // TS0601 only if (isParent()) { logDebug "updated parent->child" getChildByEndpointId(indexToEndpointId(0))?.onParentSettingsChange(settings) } else { logDebug "updated child->parent" parent?.onChildSettingsChange(device.deviceNetworkId, settings) } // ver 1.3.1 03/25/2023 commented out //return initialized() } // custom initialization method, called from installed() def initialized() { logDebug "initialized() ... ${getDeviceInfo()}" ArrayList cmds = [] unschedule() // added 12/10/2022 logDebug "initialized() device.getData() = ${device.getData()}" if (isParent()) { createChildDevices() if (true /*device.getDataValue("model") == "TS0601"*/) { // TODO !! must be called for TS0011E also! TODO: isTuya() ! logDebug "spelling tuyaBlackMagic()" cmds += tuyaBlackMagic() } else { logDebug "tuyaBlackMagic() was skipped for model ${device.getDataValue('model')}" } ArrayList configCmds = listenChildDevices() if (configCmds != null) { cmds += configCmds } // sendZigbeeCommands(cmds) } else { logDebug "skipping initialized() for child device" } } /* ----------------------------------------------------------------------------- Shared helper functions ----------------------------------------------------------------------------- */ import java.lang.Math; def rescale(value, fromLo, fromHi, toLo, toHi) { return Math.round((((value-fromLo)*(toHi-toLo))/(fromHi-fromLo)+toLo)) } def scaleBetween(unscaledNum, minAllowed, maxAllowed, min, max) { return Math.round( (maxAllowed - minAllowed) * (unscaledNum - min) / (max - min) + minAllowed ) } def intTo16bitUnsignedHex(value) { def hexStr = zigbee.convertToHexString(value.toInteger(),4) return new String(hexStr.substring(2, 4) + hexStr.substring(0, 2)) } def intTo8bitUnsignedHex(value) { return zigbee.convertToHexString(value.toInteger(), 2) } /* ----------------------------------------------------------------------------- Logging output ----------------------------------------------------------------------------- */ def logTrace(msg) { if (settings.traceEnable) { log.trace "${device.displayName} " + msg } } def logDebug(msg) { if (settings.debugEnable) { log.debug "${device.displayName} " + msg } } def logInfo(msg) { if (settings.infoEnable) { log.info "${device.displayName} " + msg } } def logWarn(msg) { if (settings.debugEnable) { log.warn "${device.displayName} " + msg } } ////////////////////////////////////////////////////////////////////////////// private getCLUSTER_TUYA() { 0xEF00 } private getSETDATA() { 0x00 } private getSETTIME() { 0x24 } // Tuya Commands private getTUYA_REQUEST() { 0x00 } private getTUYA_REPORTING() { 0x01 } private getTUYA_QUERY() { 0x02 } private getTUYA_STATUS_SEARCH() { 0x06 } private getTUYA_TIME_SYNCHRONISATION() { 0x24 } // tuya DP type private getDP_TYPE_RAW() { "01" } // [ bytes ] private getDP_TYPE_BOOL() { "01" } // [ 0/1 ] private getDP_TYPE_VALUE() { "02" } // [ 4 byte value ] private getDP_TYPE_STRING() { "03" } // [ N byte string ] private getDP_TYPE_ENUM() { "04" } // [ 0-255 ] private getDP_TYPE_BITMAP() { "05" } // [ 1,2,4 bytes ] as bits private sendTuyaCommand(dp, dp_type, fncmd) { ArrayList cmds = [] def ep = safeToInt(state.destinationEP) if (ep==null || ep==0) ep = 1 cmds += zigbee.command(CLUSTER_TUYA, SETDATA, [destEndpoint :ep], PACKET_ID + dp + dp_type + zigbee.convertToHexString((int)(fncmd.length()/2), 4) + fncmd ) logDebug "${device.displayName} sendTuyaCommand = ${cmds}" return cmds } private getPACKET_ID() { return randomPacketId() } Integer safeToInt(val, Integer defaultVal=0) { return "${val}"?.isInteger() ? "${val}".toInteger() : defaultVal } Double safeToDouble(val, Double defaultVal=0.0) { return "${val}"?.isDouble() ? "${val}".toDouble() : defaultVal } void sendZigbeeCommands(ArrayList cmd) { logDebug "sendZigbeeCommands: ${cmd}" hubitat.device.HubMultiAction allActions = new hubitat.device.HubMultiAction() cmd.each { allActions.add(new hubitat.device.HubAction(it, hubitat.device.Protocol.ZIGBEE)) if (state.stats != null) state.stats['txCtr'] = (state.stats['txCtr'] ?: 0) + 1 else state.stats=[:] } sendHubCommand(allActions) } def driverVersionAndTimeStamp() {version() + ' ' + timeStamp() + ((_DEBUG==true) ? " debug version!" : " ")} def checkDriverVersion() { if (state.driverVersion == null || driverVersionAndTimeStamp() != state.driverVersion) { logInfo "updating the settings from the current driver version ${state.driverVersion} to the new version ${driverVersionAndTimeStamp()}" initializeVars(fullInit = false) if (state.lastRx == null || state.stats == null || state.lastTx == null) { resetStats() } scheduleDeviceHealthCheck() state.driverVersion = driverVersionAndTimeStamp() } } def updateTuyaVersion() { def application = device.getDataValue("application") if (application != null) { def ver = zigbee.convertHexToInt(application) def str = ((ver&0xC0)>>6).toString() + "." + ((ver&0x30)>>4).toString() + "." + (ver&0x0F).toString() if (device.getDataValue("tuyaVersion") != str) { device.updateDataValue("tuyaVersion", str) logInfo "tuyaVersion set to $str" } } else { return null } } def getProfileKey(String valueStr) { def key = null deviceProfilesV2.each { profileName, profileMap -> if (profileMap.description.equals(valueStr)) { key = profileName } } return key } def getDeviceNameAndProfile( model=null, manufacturer=null) { def deviceName = UNKNOWN def deviceProfile = UNKNOWN String deviceModel = model != null ? model : device.getDataValue('model') ?: UNKNOWN String deviceManufacturer = manufacturer != null ? manufacturer : device.getDataValue('manufacturer') ?: UNKNOWN deviceProfilesV2.each { profileName, profileMap -> profileMap.fingerprints.each { fingerprint -> if (fingerprint.model == deviceModel && fingerprint.manufacturer == deviceManufacturer) { deviceProfile = profileName deviceName = fingerprint.deviceJoinName ?: deviceProfilesV2[deviceProfile].deviceJoinName ?: UNKNOWN logDebug "found exact match for model ${deviceModel} manufacturer ${deviceManufacturer} : profileName=${deviceProfile} deviceName =${deviceName}" return [deviceName, deviceProfile] } } } if (deviceProfile == UNKNOWN) { logWarn "model ${deviceModel} manufacturer ${deviceManufacturer} NOT FOUND! deviceName=${deviceName} profileName=${deviceProfile}" } return [deviceName, deviceProfile] } // called from TODO def setDeviceNameAndProfile( model=null, manufacturer=null) { def (String deviceName, String deviceProfile) = getDeviceNameAndProfile(model, manufacturer) if (deviceProfile == null) { logWarn "unknown model ${deviceModel} manufacturer ${deviceManufacturer}" // don't change the device name when unknown state.deviceProfile = UNKNOWN } def dataValueModel = model != null ? model : device.getDataValue('model') ?: UNKNOWN def dataValueManufacturer = manufacturer != null ? manufacturer : device.getDataValue('manufacturer') ?: UNKNOWN if (deviceName != NULL && deviceName != UNKNOWN ) { device.setName(deviceName) state.deviceProfile = deviceProfile //logDebug "before: forcedProfile = ${settings.forcedProfile} to be set to ${deviceProfilesV2[deviceProfile].description}" device.updateSetting("forcedProfile", [value:deviceProfilesV2[deviceProfile].description, type:"enum"]) //pause(1) //logDebug "after : forcedProfile = ${settings.forcedProfile}" logInfo "device model ${dataValueModel} manufacturer ${dataValueManufacturer} was set to : deviceProfile=${deviceProfile} : deviceName=${deviceName}" } else { logWarn "device model ${dataValueModel} manufacturer ${dataValueManufacturer} was not found!" } } //---------------------------- /** * sends 'rtt'event (after a ping() command) * @param null: calculate the RTT in ms * value: send the text instead ('timeout', 'n/a', etc..) * @return none */ void sendRttEvent( String value=null) { def now = new Date().getTime() def timeRunning = now.toInteger() - (this.state.lastTx["pingTime"] ?: now()).toInteger() if (timeRunning <= 0) return def descriptionText = "Round-trip time is ${timeRunning} (ms)" if (value == null) { def cd = getChildDevices() cd.each { child -> logTrace "child=${child}" child?.sendEvent(name: 'rtt', value: timeRunning, descriptionText: descriptionText, unit: "ms", type: "physical") child?.logInfo "${descriptionText}" } this.logInfo "${descriptionText}" this.sendEvent(name: "rtt", value: timeRunning, descriptionText: descriptionText, unit: "ms", type: "physical") } else { def cd = getChildDevices() cd.each { child -> logTrace "child=${child}" child?.sendEvent(name: 'rtt', value: value, descriptionText: descriptionText, unit: "ms", type: "physical") child?.logInfo "${descriptionText}" } descriptionText = "Round-trip time is ${value}" this.logInfo "${descriptionText}" this.sendEvent(name: "rtt", value: value, descriptionText: descriptionText, unit: "ms",type: "physical") } } private void sendHealthStatusEventAll(String status) { logTrace "sendHealthStatusEventAll: ${status} DW=${getDW()} size = ${getChildDevices().size()}" if (device.currentValue('healthStatus') != status) { String descriptionText = "healthStatus was set to ${status}" def cd = getChildDevices() cd.each { child -> logTrace"child=${child}" child?.sendEvent(name: 'healthStatus', value: status, descriptionText: descriptionText) child?.logInfo "${descriptionText}" } this.sendEvent(name: 'healthStatus', value: status, descriptionText: descriptionText) this.logInfo "${descriptionText}" } } private void scheduleCommandTimeoutCheck(int delay = COMMAND_TIMEOUT) { logTrace "scheduleCommandTimeoutCheck: delay=${delay} isParent=${isParent()}" runIn(delay, 'deviceCommandTimeout', [overwrite: true, misfire: "ignore"]) } void deviceCommandTimeout() { logWarn 'no response received (device offline?)' sendHealthStatusEventAll('offline') } private void scheduleDeviceHealthCheck() { int interval = (settings.healthCheckInterval as Integer) ?: HealthcheckIntervalOpts.defaultValue if (interval > 0) { log.info "scheduling health check every ${interval} minutes" scheduleDeviceHealthCheck(interval) } } private void scheduleDeviceHealthCheck(int intervalMins) { Random rnd = new Random() getDW().schedule("${rnd.nextInt(59)} ${rnd.nextInt(9)}/${intervalMins} * ? * * *", 'ping') } void logsOff() { logInfo 'debug logging disabled...' device.updateSetting('debugEnable', [value: 'false', type: 'bool']) device.updateSetting('traceEnable', [value: 'false', type: 'bool']) } //---------------------------- def tuyaTest( dpCommand, dpValue, dpTypeString ) { ArrayList cmds = [] def dpType = dpTypeString=="DP_TYPE_VALUE" ? DP_TYPE_VALUE : dpTypeString=="DP_TYPE_BOOL" ? DP_TYPE_BOOL : dpTypeString=="DP_TYPE_ENUM" ? DP_TYPE_ENUM : null def dpValHex = dpTypeString=="DP_TYPE_VALUE" ? zigbee.convertToHexString(dpValue as int, 8) : dpValue logWarn "${device.displayName} sending TEST command=${dpCommand} value=${dpValue} ($dpValHex) type=${dpType}" sendZigbeeCommands( sendTuyaCommand(dpCommand, dpType, dpValHex) ) } def testParse(String description) { log.warn "test parsing : ${description}" parse( description) log.warn "--- end ---" } def moveToLevelTuya( level, delay) { /* moveToLevelTuya: { ID: 240, 0xF0 parameters: [ {name: 'level', type: DataType.uint16}, {name: 'transtime', type: DataType.uint16}, ], }, */ } def testRefresh() { logWarn "testRefresh: see the live logs" ArrayList cmds = [] if (state.states == null) state.states = [:] state.states["isRefresh"] = true def ep = safeToInt(getDestinationEP()) cmds = zigbee.readAttribute(0x0000, [0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006], [destEndpoint:ep], delay=200) // commands : off:0 on:1 toggle:2 cmds += zigbee.readAttribute(0x0006, 0x0000, [destEndpoint:ep], delay = 200) // On/Off cmds += zigbee.readAttribute(0x0006, 0x4000, [destEndpoint:ep], delay = 200) // globalSceneCtrl, boolean cmds += zigbee.readAttribute(0x0006, 0x4001, [destEndpoint:ep], delay = 200) // OnTime, uint16 cmds += zigbee.readAttribute(0x0006, 0x4002, [destEndpoint:ep], delay = 200) // OffWaitTime, uint16 cmds += zigbee.readAttribute(0x0006, 0x4003, [destEndpoint:ep], delay = 200) // startUpOnOff, enum8 cmds += zigbee.readAttribute(0x0006, 0x5000, [destEndpoint:ep], delay = 200) // tuyaBacklightSwitch, enum8 cmds += zigbee.readAttribute(0x0006, 0x8001, [destEndpoint:ep], delay = 200) // IndicatorMode: 1 (backlight), enum8 cmds += zigbee.readAttribute(0x0006, 0x8002, [destEndpoint:ep], delay = 200) // RestartStatus: 2 , enum8 cmds += zigbee.readAttribute(0x0006, 0x8004, [destEndpoint:ep], delay = 200) // OperationMode, enum8 // commands: moveToLevel:0 (level:uint8, transtime:uint16) move:1 (movemode:uint8, rate:uint8) step:2 (stepmode:uint8, stepsize:uint8, transtime:uint16 ) stop:3 () // commands: moveToLevelWithOnOff:4 (level:uint8, transtime:uint16) moveWithOnOff:5 (movemode:uint8, rate:uint8) stepWithOnOff:6 (stepmode:uint8, stepsize:uint8, transtime:uint16 ) // commands: stopWithOnOff:7 () moveToLevelTuya:0xF0 (level:uint16, transtime:uint16) // commands: cmds += zigbee.readAttribute(0x0008, 0x0000, [destEndpoint:ep], delay = 200) // current level, uint8 cmds += zigbee.readAttribute(0x0008, 0x0001, [destEndpoint:ep], delay = 200) // remainingTime, uint16 - GLEDOPTO, Philips Hue cmds += zigbee.readAttribute(0x0008, 0x0002, [destEndpoint:ep], delay = 200) // minLevel, uint8 cmds += zigbee.readAttribute(0x0008, 0x0003, [destEndpoint:ep], delay = 200) // maxLevel, uint8 cmds += zigbee.readAttribute(0x0008, 0x000F, [destEndpoint:ep], delay = 200) // options, bitmap8 - Philips Hue cmds += zigbee.readAttribute(0x0008, 0x0010, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0x0011, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0x0012, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0x0013, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0x0014, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0xF000, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0x00F0, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0xFC02, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0xFC03, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0x0008, 0xFC04, [destEndpoint:ep], delay = 200) // cmds += zigbee.readAttribute(0xE000, 0xD001, [destEndpoint:ep], delay = 200) // encoding:42, value:AAAA; attrId: D001, encoding: 48, value: 020006 cmds += zigbee.readAttribute(0xE000, 0xD002, [destEndpoint:ep], delay = 200) // encoding: 48, value: 02000A cmds += zigbee.readAttribute(0xE000, 0xD003, [destEndpoint:ep], delay = 200) cmds += zigbee.readAttribute(0xE001, 0xD010, [destEndpoint:ep], delay = 200) // powerOnBehavior: {ID: 0xD010, type: DataType.enum8}, cmds += zigbee.readAttribute(0xE001, 0xD030, [destEndpoint:ep], delay = 200) // switchType: {ID: 0xD030, type: DataType.enum8}, sendZigbeeCommands(cmds) } def getParentDNI() { if (isParent()) { logTrace "Parent device DNI: ${device.deviceNetworkId}" return device.deviceNetworkId } else { def parentDeviceId = parent?.deviceNetworkId?.split("-")[0] if (parentDeviceId) { logTrace "Parent device DNI: ${parentDeviceId}" return parentDeviceId } else { logWarn "No parent device found." return null } } } def setState( st, val ) { logTrace "setState ($st, $val)" state."$st" = val } def testX( var ) { /* def cd = getChildDevices() log.warn "cd=${cd}" cd.each { child -> child.setState("test", "test") logTrace "child=${child} child.getState() = ${child.getState()}" } */ parent.setState("parentState", "parentTest") } // https://developer.tuya.com/en/docs/iot/tuya-smart-dimmer-switch-single-phrase-input-without-neutral-line?id=K9ik6zvokodvn#subtitle-10-Private%20cluster // https://github.com/Koenkk/zigbee2mqtt/discussions/7608#discussioncomment-1614827 /* ID Name Data type Range Defualt value 0xFC00 Level control max min uint16 -0x21 0x0000 - 0xffff 0x01ff 0xFC02 Level control bulb type uint8 -0x20 0x00–0xFF 0x00 0xFC03 Level control scr state uint8 -0x20 0x00–0xFF 0x01 0xFC04 Level control current percentage uint8 -0x20 0x00–0xFF 0x01 0xFC05 Level control min percentage uint8 -0x20 0x00–0xFF 0x01 */ /* // https://github.com/jonnylangefeld/home-assistant/blob/0a947da5d38421947b9945420ac96d467b6c3392/deps/zhaquirks/tuya/ts110e.py TUYA_LEVEL_ATTRIBUTE = 0xF000 // (uint16) # 0xF000 reported values are 10-1000, must be converted to 0-254 => value = (value + 4 - 10) * 254 // (1000 - 10) // # convert dim values to 10-1000 => brightness = args[0] * (1000 - 10) // 254 + 10 TUYA_BULB_TYPE_ATTRIBUTE = 0xFC02 // (enum8) LED = 0x00 INCANDESCENT = 0x01 HALOGEN = 0x02 TUYA_MIN_LEVEL_ATTRIBUTE = 0xFC03 // (uint16) TUYA_MAX_LEVEL_ATTRIBUTE = 0xFC04 // (uint16) TUYA_CUSTOM_LEVEL_COMMAND = 0x00F0 // */ /* https://developer.tuya.com/en/docs/iot/tuya-zigbee-lighting-access-standard?id=K9ik6zvod83fi https://developer.tuya.com/en/docs/iot/tuya-zigbee-lighting-dimmer-swith-access-standard?id=K9ik6zvlvbqyw _TZE200_1agwnems -> check https://gist.github.com/Koenkk/9c36da807c3768a85aaed9a352c74e96 !!! https://community.hubitat.com/t/zigbee-dimmer-pairing-issues/142460/5?u=kkossev https://github.com/Koenkk/zigbee2mqtt/issues/13800#issuecomment-1247578685 https://github.com/Koenkk/zigbee2mqtt/issues/20098 https://github.com/Koenkk/zigbee2mqtt/issues/21791 https://github.com/zigpy/zha-device-handlers/issues/2278#issuecomment-1472866621 SmartThings : https://drive.google.com/file/d/1eqLByV3P_9wEDrZV9bQvIWGg2MIT5ySB/view */