(kicad_pcb (version 20240108) (generator "designgraph") (generator_version "0.1")

  (general
    (thickness 1.6)
    (legacy_teardrops no)
  )

  (layers
    (0 "F.Cu" signal)
    (1 "In1.Cu" power)
    (2 "In2.Cu" power)
    (31 "B.Cu" signal)
    (32 "B.Adhes" user)
    (33 "F.Adhes" user)
    (34 "B.Paste" user)
    (35 "F.Paste" user)
    (36 "B.SilkS" user)
    (37 "F.SilkS" user)
    (38 "B.Mask" user)
    (39 "F.Mask" user)
    (40 "Dwgs.User" user)
    (41 "Cmts.User" user)
    (42 "Eco1.User" user)
    (43 "Eco2.User" user)
    (44 "Edge.Cuts" user)
    (45 "Margin" user)
    (46 "B.CrtYd" user)
    (47 "F.CrtYd" user)
    (48 "B.Fab" user)
    (49 "F.Fab" user)
  )

  (setup
    (pad_to_mask_clearance 0)
  )

  (net 0 "")
  (net 1 "USB_CC1")
  (net 2 "USB_CC2")
  (net 3 "GND")
  (net 4 "/pwr/LED_ANODE")
  (net 5 "+5V")
  (net 6 "+3V3")
  (net 7 "+1V8")
  (net 8 "+1V2")
  (net 9 "+2V5")
  (net 10 "HDMID0P")
  (net 11 "HDMID0N")
  (net 12 "HDMID1P")
  (net 13 "HDMID1N")
  (net 14 "HDMID2P")
  (net 15 "HDMID2N")
  (net 16 "HDMICP")
  (net 17 "HDMICN")
  (net 18 "CSI_D0P")
  (net 19 "CSI_D0N")
  (net 20 "CSI_D1P")
  (net 21 "CSI_D1N")
  (net 22 "CSI_CKP")
  (net 23 "CSI_CKN")
  (net 24 "I2C_SCL")
  (net 25 "I2C_SDA")
  (net 26 "DDC_SCL")
  (net 27 "DDC_SDA")
  (net 28 "CEC")
  (net 29 "HDMI_HPD")
  (net 30 "TC358743_RESETN")
  (net 31 "/hdmi/REXT_PIN")
  (net 32 "/hdmi/XTAL_IN")
  (net 33 "/hdmi/XTAL_OUT")
  (net 34 "/hdmi/AVDD33_FILT")
  (net 35 "/hdmi/AVDD12_FILT")
  (net 36 "/hdmi/PCKIN_FILT")
  (net 37 "USB_UP_DP")
  (net 38 "USB_UP_DM")
  (net 39 "USB_DN1_DP")
  (net 40 "USB_DN1_DM")
  (net 41 "USB_DN2_DP")
  (net 42 "USB_DN2_DM")
  (net 43 "USB_HUB_RESET_N")
  (net 44 "/usb/XTAL_IN")
  (net 45 "/usb/XTAL_OUT")
  (net 46 "/usb/RBIAS_PIN")
  (net 47 "/usb/CRFILT")
  (net 48 "/usb/PLLFILT")
  (net 49 "DUOS_TO_ESP32")
  (net 50 "ESP32_TO_DUOS")
  (net 51 "ETH_TXP")
  (net 52 "ETH_TXN")
  (net 53 "ETH_RXP")
  (net 54 "ETH_RXN")
  (net 55 "/atx/PWR_BTN_DRIVE")
  (net 56 "PWR_BTN_L")
  (net 57 "/atx/RST_BTN_DRIVE")
  (net 58 "RST_BTN_L")
  (net 59 "PWR_LED_P")
  (net 60 "PWR_LED_N")
  (net 61 "PWR_LED_SENSE")
  (net 62 "HDD_LED_P")
  (net 63 "HDD_LED_N")
  (net 64 "HDD_LED_SENSE")

  (gr_line (start 88.5000 49.0000) (end 208.5000 49.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))
  (gr_line (start 208.5000 49.0000) (end 208.5000 141.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))
  (gr_line (start 208.5000 141.0000) (end 88.5000 141.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))
  (gr_line (start 88.5000 141.0000) (end 88.5000 49.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "pwr.R1"
			(at 133.3420 52.9943 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "5.1k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "pwr.R2"
			(at 121.8197 53.7892 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "5.1k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "pwr.R3"
			(at 129.5000 70.2640 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "1k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "LED_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "LED")
		(property "Reference" "pwr.D1"
			(at 127.0132 53.3464 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "PWR"
			(at 0 1.65 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -1.685 -0.96)
			(end -1.685 0.96)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.685 0.96)
			(end 1 0.96)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1 -0.96)
			(end -1.685 -0.96)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.68 -0.95)
			(end 1.68 0.95)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -1 -0.3)
			(end -1 0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 0.6)
			(end 1 0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.7 -0.6)
			(end -1 -0.3)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1 -0.6)
			(end -0.7 -0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1 0.6)
			(end 1 -0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.9375 0)
			(size 0.975 1.4)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.9375 0)
			(size 0.975 1.4)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_1206_3216Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C1"
			(at 139.5400 67.8589 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "47u"
			(at 0 1.85 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.711252 -0.91)
			(end 0.711252 -0.91)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.711252 0.91)
			(end 0.711252 0.91)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -2.3 -1.15)
			(end 2.3 1.15)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1.6 -0.8)
			(end 1.6 0.8)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.8 0.8)
					(thickness 0.12)
				)
			)
		)
		(pad "1" smd roundrect
			(at -1.475 0)
			(size 1.15 1.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.217391)
		)
		(pad "2" smd roundrect
			(at 1.475 0)
			(size 1.15 1.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.217391)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_1206_3216Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOT-223-3_TabPin2"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "module CMS SOT223 4 pins")
		(tags "CMS SOT")
		(property "Reference" "pwr.U1"
			(at 149.0200 72.2237 0)
			(layer "F.SilkS")
			(uuid "095b50a5-76ce-476b-aa10-37a37fa441f1")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "AMS1117-3.3"
			(at 0 4.5 0)
			(layer "F.Fab")
			(uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "0fecb949-4744-4c65-8091-70f595847ba4")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "7dd6192e-e612-428f-816e-6f28697542d5")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -1.85 -3.41)
			(end 1.91 -3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d")
		)
		(fp_line
			(start -1.85 3.41)
			(end 1.91 3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "6e43f798-7915-403c-b947-4851bde35045")
		)
		(fp_line
			(start 1.91 -3.41)
			(end 1.91 -2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "ddfc40c4-e33c-493e-b735-24282440d539")
		)
		(fp_line
			(start 1.91 3.41)
			(end 1.91 2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "79366377-6a9f-460a-b0d1-788467590954")
		)
		(fp_poly
			(pts
				(xy -3.13 -3.31) (xy -3.37 -3.64) (xy -2.89 -3.64) (xy -3.13 -3.31)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
			(uuid "27420593-f422-495a-9e17-88a99bcd8a3d")
		)
		(fp_line
			(start -4.4 -3.6)
			(end -4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")
		)
		(fp_line
			(start -4.4 3.6)
			(end 4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")
		)
		(fp_line
			(start 4.4 -3.6)
			(end -4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "d963e7fb-b321-4298-bcd6-9650f5938938")
		)
		(fp_line
			(start 4.4 3.6)
			(end 4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "18839f08-10e9-4a73-9312-8be172f09091")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -0.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "f393364a-2641-4746-ba4c-6509ea1de503")
		)
		(fp_line
			(start -1.85 3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "27db54e0-f4a8-4972-bcbc-256787416dcd")
		)
		(fp_line
			(start -0.85 -3.35)
			(end 1.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "be579ebe-38db-4860-98f0-9f530f704760")
		)
		(fp_line
			(start 1.85 -3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
			(uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b")
			(effects
				(font
					(size 0.8 0.8)
					(thickness 0.12)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.15 -2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448")
		)
		(pad "2" smd roundrect
			(at -3.15 0)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8")
		)
		(pad "2" smd roundrect
			(at 3.15 0)
			(size 2 3.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e")
		)
		(pad "3" smd roundrect
			(at -3.15 2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "5046df04-2b74-45a5-867e-e33a5e51e59c")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C2"
			(at 158.0234 72.0557 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C3"
			(at 174.9400 61.0000 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C4"
			(at 140.9531 72.1623 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOT-223-3_TabPin2"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "module CMS SOT223 4 pins")
		(tags "CMS SOT")
		(property "Reference" "pwr.U2"
			(at 167.3745 76.4343 0)
			(layer "F.SilkS")
			(uuid "095b50a5-76ce-476b-aa10-37a37fa441f1")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "AMS1117-1.8"
			(at 0 4.5 0)
			(layer "F.Fab")
			(uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "0fecb949-4744-4c65-8091-70f595847ba4")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "7dd6192e-e612-428f-816e-6f28697542d5")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -1.85 -3.41)
			(end 1.91 -3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d")
		)
		(fp_line
			(start -1.85 3.41)
			(end 1.91 3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "6e43f798-7915-403c-b947-4851bde35045")
		)
		(fp_line
			(start 1.91 -3.41)
			(end 1.91 -2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "ddfc40c4-e33c-493e-b735-24282440d539")
		)
		(fp_line
			(start 1.91 3.41)
			(end 1.91 2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "79366377-6a9f-460a-b0d1-788467590954")
		)
		(fp_poly
			(pts
				(xy -3.13 -3.31) (xy -3.37 -3.64) (xy -2.89 -3.64) (xy -3.13 -3.31)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
			(uuid "27420593-f422-495a-9e17-88a99bcd8a3d")
		)
		(fp_line
			(start -4.4 -3.6)
			(end -4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")
		)
		(fp_line
			(start -4.4 3.6)
			(end 4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")
		)
		(fp_line
			(start 4.4 -3.6)
			(end -4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "d963e7fb-b321-4298-bcd6-9650f5938938")
		)
		(fp_line
			(start 4.4 3.6)
			(end 4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "18839f08-10e9-4a73-9312-8be172f09091")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -0.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "f393364a-2641-4746-ba4c-6509ea1de503")
		)
		(fp_line
			(start -1.85 3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "27db54e0-f4a8-4972-bcbc-256787416dcd")
		)
		(fp_line
			(start -0.85 -3.35)
			(end 1.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "be579ebe-38db-4860-98f0-9f530f704760")
		)
		(fp_line
			(start 1.85 -3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
			(uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b")
			(effects
				(font
					(size 0.8 0.8)
					(thickness 0.12)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.15 -2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448")
		)
		(pad "2" smd roundrect
			(at -3.15 0)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8")
		)
		(pad "2" smd roundrect
			(at 3.15 0)
			(size 2 3.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e")
		)
		(pad "3" smd roundrect
			(at -3.15 2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "5046df04-2b74-45a5-867e-e33a5e51e59c")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C5"
			(at 175.4414 67.9531 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C6"
			(at 167.5505 83.5532 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C7"
			(at 174.2564 56.1607 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOT-223-3_TabPin2"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "module CMS SOT223 4 pins")
		(tags "CMS SOT")
		(property "Reference" "pwr.U3"
			(at 155.7812 81.5954 0)
			(layer "F.SilkS")
			(uuid "095b50a5-76ce-476b-aa10-37a37fa441f1")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "AMS1117-1.2"
			(at 0 4.5 0)
			(layer "F.Fab")
			(uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "0fecb949-4744-4c65-8091-70f595847ba4")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "7dd6192e-e612-428f-816e-6f28697542d5")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -1.85 -3.41)
			(end 1.91 -3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d")
		)
		(fp_line
			(start -1.85 3.41)
			(end 1.91 3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "6e43f798-7915-403c-b947-4851bde35045")
		)
		(fp_line
			(start 1.91 -3.41)
			(end 1.91 -2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "ddfc40c4-e33c-493e-b735-24282440d539")
		)
		(fp_line
			(start 1.91 3.41)
			(end 1.91 2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "79366377-6a9f-460a-b0d1-788467590954")
		)
		(fp_poly
			(pts
				(xy -3.13 -3.31) (xy -3.37 -3.64) (xy -2.89 -3.64) (xy -3.13 -3.31)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
			(uuid "27420593-f422-495a-9e17-88a99bcd8a3d")
		)
		(fp_line
			(start -4.4 -3.6)
			(end -4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")
		)
		(fp_line
			(start -4.4 3.6)
			(end 4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")
		)
		(fp_line
			(start 4.4 -3.6)
			(end -4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "d963e7fb-b321-4298-bcd6-9650f5938938")
		)
		(fp_line
			(start 4.4 3.6)
			(end 4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "18839f08-10e9-4a73-9312-8be172f09091")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -0.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "f393364a-2641-4746-ba4c-6509ea1de503")
		)
		(fp_line
			(start -1.85 3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "27db54e0-f4a8-4972-bcbc-256787416dcd")
		)
		(fp_line
			(start -0.85 -3.35)
			(end 1.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "be579ebe-38db-4860-98f0-9f530f704760")
		)
		(fp_line
			(start 1.85 -3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
			(uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b")
			(effects
				(font
					(size 0.8 0.8)
					(thickness 0.12)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.15 -2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448")
		)
		(pad "2" smd roundrect
			(at -3.15 0)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8")
		)
		(pad "2" smd roundrect
			(at 3.15 0)
			(size 2 3.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e")
		)
		(pad "3" smd roundrect
			(at -3.15 2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "5046df04-2b74-45a5-867e-e33a5e51e59c")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C8"
			(at 147.0682 79.6956 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C9"
			(at 146.8636 84.0581 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C10"
			(at 145.3090 66.1381 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOT-223-3_TabPin2"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "module CMS SOT223 4 pins")
		(tags "CMS SOT")
		(property "Reference" "pwr.U4"
			(at 178.2994 78.5891 0)
			(layer "F.SilkS")
			(uuid "095b50a5-76ce-476b-aa10-37a37fa441f1")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "AMS1117-2.5"
			(at 0 4.5 0)
			(layer "F.Fab")
			(uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "0fecb949-4744-4c65-8091-70f595847ba4")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "7dd6192e-e612-428f-816e-6f28697542d5")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -1.85 -3.41)
			(end 1.91 -3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d")
		)
		(fp_line
			(start -1.85 3.41)
			(end 1.91 3.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "6e43f798-7915-403c-b947-4851bde35045")
		)
		(fp_line
			(start 1.91 -3.41)
			(end 1.91 -2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "ddfc40c4-e33c-493e-b735-24282440d539")
		)
		(fp_line
			(start 1.91 3.41)
			(end 1.91 2.15)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "79366377-6a9f-460a-b0d1-788467590954")
		)
		(fp_poly
			(pts
				(xy -3.13 -3.31) (xy -3.37 -3.64) (xy -2.89 -3.64) (xy -3.13 -3.31)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
			(uuid "27420593-f422-495a-9e17-88a99bcd8a3d")
		)
		(fp_line
			(start -4.4 -3.6)
			(end -4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")
		)
		(fp_line
			(start -4.4 3.6)
			(end 4.4 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")
		)
		(fp_line
			(start 4.4 -3.6)
			(end -4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "d963e7fb-b321-4298-bcd6-9650f5938938")
		)
		(fp_line
			(start 4.4 3.6)
			(end 4.4 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "18839f08-10e9-4a73-9312-8be172f09091")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc")
		)
		(fp_line
			(start -1.85 -2.35)
			(end -0.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "f393364a-2641-4746-ba4c-6509ea1de503")
		)
		(fp_line
			(start -1.85 3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "27db54e0-f4a8-4972-bcbc-256787416dcd")
		)
		(fp_line
			(start -0.85 -3.35)
			(end 1.85 -3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "be579ebe-38db-4860-98f0-9f530f704760")
		)
		(fp_line
			(start 1.85 -3.35)
			(end 1.85 3.35)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
			(uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b")
			(effects
				(font
					(size 0.8 0.8)
					(thickness 0.12)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.15 -2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448")
		)
		(pad "2" smd roundrect
			(at -3.15 0)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8")
		)
		(pad "2" smd roundrect
			(at 3.15 0)
			(size 2 3.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e")
		)
		(pad "3" smd roundrect
			(at -3.15 2.3)
			(size 2 1.5)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(uuid "5046df04-2b74-45a5-867e-e33a5e51e59c")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C11"
			(at 176.4600 72.0000 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0805_2012Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C12"
			(at 166.8682 87.8460 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "pwr.C13"
			(at 149.7941 66.1605 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "csBGA-64_5x5mm_Layout8x8_P0.5mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "csBGA-64, 5x5mm, 64 Ball, 8x8 Layout, 0.5mm Pitch, generated with kicad-footprint-generator ipc_bga_generator.py, https://www.latticesemi.com/view_document?document_id=213")
		(tags "BGA 64 0.5")
		(solder_mask_margin -0.05)
		(solder_paste_margin -0.05)
		(property "Reference" "hdmi.U5"
			(at 117.8952 75.9178 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "TC358743XBG"
			(at 0 3.5 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -2.61 2.61)
			(end -2.61 -1.61)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.61 -2.61)
			(end 2.61 -2.61)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.61 -2.61)
			(end 2.61 2.61)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.61 2.61)
			(end -2.61 2.61)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_poly
			(pts
				(xy -2.61 -2.61)
				(xy -3.11 -2.61)
				(xy -2.61 -3.11)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -3.5 -3.5)
			(end 3.5 3.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.5 -1.5)
			(end -1.5 -2.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -2.5 2.5)
			(end -2.5 -1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -2.5)
			(end 2.5 -2.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 2.5 -2.5)
			(end 2.5 2.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 2.5 2.5)
			(end -2.5 2.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "A1" smd circle
			(at -1.75 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "A2" smd circle
			(at -1.25 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "A3" smd circle
			(at -0.75 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "A4" smd circle
			(at -0.25 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "A5" smd circle
			(at 0.25 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "A6" smd circle
			(at 0.75 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "A7" smd circle
			(at 1.25 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "A8" smd circle
			(at 1.75 -1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B1" smd circle
			(at -1.75 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B2" smd circle
			(at -1.25 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B3" smd circle
			(at -0.75 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B4" smd circle
			(at -0.25 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B5" smd circle
			(at 0.25 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B6" smd circle
			(at 0.75 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B7" smd circle
			(at 1.25 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "B8" smd circle
			(at 1.75 -1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C1" smd circle
			(at -1.75 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C2" smd circle
			(at -1.25 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C3" smd circle
			(at -0.75 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C4" smd circle
			(at -0.25 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C5" smd circle
			(at 0.25 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C6" smd circle
			(at 0.75 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C7" smd circle
			(at 1.25 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "C8" smd circle
			(at 1.75 -0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D1" smd circle
			(at -1.75 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D2" smd circle
			(at -1.25 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D3" smd circle
			(at -0.75 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D4" smd circle
			(at -0.25 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D5" smd circle
			(at 0.25 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D6" smd circle
			(at 0.75 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D7" smd circle
			(at 1.25 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "D8" smd circle
			(at 1.75 -0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E1" smd circle
			(at -1.75 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E2" smd circle
			(at -1.25 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E3" smd circle
			(at -0.75 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E4" smd circle
			(at -0.25 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E5" smd circle
			(at 0.25 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E6" smd circle
			(at 0.75 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E7" smd circle
			(at 1.25 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "E8" smd circle
			(at 1.75 0.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F1" smd circle
			(at -1.75 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F2" smd circle
			(at -1.25 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F3" smd circle
			(at -0.75 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F4" smd circle
			(at -0.25 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F5" smd circle
			(at 0.25 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F6" smd circle
			(at 0.75 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F7" smd circle
			(at 1.25 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "F8" smd circle
			(at 1.75 0.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G1" smd circle
			(at -1.75 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G2" smd circle
			(at -1.25 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G3" smd circle
			(at -0.75 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G4" smd circle
			(at -0.25 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G5" smd circle
			(at 0.25 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G6" smd circle
			(at 0.75 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G7" smd circle
			(at 1.25 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "G8" smd circle
			(at 1.75 1.25)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H1" smd circle
			(at -1.75 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H2" smd circle
			(at -1.25 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H3" smd circle
			(at -0.75 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H4" smd circle
			(at -0.25 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H5" smd circle
			(at 0.25 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H6" smd circle
			(at 0.75 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H7" smd circle
			(at 1.25 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "H8" smd circle
			(at 1.75 1.75)
			(size 0.35 0.35)
			(property pad_prop_bga)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_BGA.3dshapes/csBGA-64_5x5mm_Layout8x8_P0.5mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "Crystal_SMD_3225-4Pin_3.2x2.5mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SMD3225/4, Crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.txccrystal.com/images/pdf/7m-accuracy.pdf")
		(property "Reference" "hdmi.X1"
			(at 133.3165 87.0836 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "27MHz"
			(at 0 2.45 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -2.06 -1.71)
			(end -2.06 1.71)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.06 1.71)
			(end 2.06 1.71)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -2.1 -1.75)
			(end 2.1 1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_poly
			(pts
				(xy 1.6 -1.25)
				(xy 1.6 1.25)
				(xy -0.975 1.25)
				(xy -1.6 0.625)
				(xy -1.6 -1.25)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.8 0.8)
					(thickness 0.12)
				)
			)
		)
		(pad "1" smd roundrect
			(at -1.1 0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(pad "2" smd roundrect
			(at 1.1 0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(pad "3" smd roundrect
			(at 1.1 -0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(pad "4" smd roundrect
			(at -1.1 -0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Crystal.3dshapes/Crystal_SMD_3225-4Pin_3.2x2.5mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C26"
			(at 132.5716 91.4906 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10p"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C27"
			(at 130.9949 82.3525 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10p"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "L_0603_1608Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Inductor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
		(tags "inductor")
		(property "Reference" "hdmi.FB1"
			(at 117.9649 84.7056 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "600R"
			(at 0 1.43 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.162779 -0.51)
			(end 0.162779 -0.51)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.162779 0.51)
			(end 0.162779 0.51)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.48 -0.73)
			(end 1.48 0.73)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.8 -0.4)
			(end 0.8 0.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.4 0.4)
					(thickness 0.06)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.7875 0)
			(size 0.875 0.95)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.7875 0)
			(size 0.875 0.95)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0603_1608Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "L_0603_1608Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Inductor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
		(tags "inductor")
		(property "Reference" "hdmi.FB2"
			(at 117.9432 89.4721 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "600R"
			(at 0 1.43 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.162779 -0.51)
			(end 0.162779 -0.51)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.162779 0.51)
			(end 0.162779 0.51)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.48 -0.73)
			(end 1.48 0.73)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.8 -0.4)
			(end 0.8 0.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.4 0.4)
					(thickness 0.06)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.7875 0)
			(size 0.875 0.95)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.7875 0)
			(size 0.875 0.95)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_0603_1608Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "hdmi.R4"
			(at 146.4943 93.1580 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "4.7k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "hdmi.R5"
			(at 145.8388 89.7669 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "4.7k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "hdmi.R6"
			(at 124.4300 77.9509 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "hdmi.R7"
			(at 118.1668 93.4732 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "2k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C16"
			(at 125.1420 74.1998 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C17"
			(at 128.6834 77.3884 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C18"
			(at 117.7331 96.5044 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C19"
			(at 129.2512 74.3026 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C20"
			(at 132.9869 78.1545 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C21"
			(at 131.0421 94.9068 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C22"
			(at 124.7543 70.9035 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "hdmi.C24"
			(at 118.4188 99.7471 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "QFN, 36 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/36L_QFN_6x6_with_3_7x3_7_EP_Punch_Dimpled_4E_C04-0241A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py")
		(tags "QFN NoLead")
		(property "Reference" "usb.U6"
			(at 153.6370 92.8378 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "USB2514B"
			(at 0 4.3 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -3.11 -3.11)
			(end -2.385 -3.11)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -3.11 -2.385)
			(end -3.11 -3.11)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -3.11 3.11)
			(end -3.11 2.385)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.385 3.11)
			(end -3.11 3.11)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.385 -3.11)
			(end 3.11 -3.11)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.11 -3.11)
			(end 3.11 -2.385)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.11 2.385)
			(end 3.11 3.11)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.11 3.11)
			(end 2.385 3.11)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_poly
			(pts
				(xy -3.61 -2)
				(xy -3.94 -1.76)
				(xy -3.94 -2.24)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
		)
		(fp_line
			(start -3.6 -2.38)
			(end -3.25 -2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -3.6 2.38)
			(end -3.6 -2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -3.25 -3.25)
			(end -2.38 -3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -3.25 -2.38)
			(end -3.25 -3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -3.25 2.38)
			(end -3.6 2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -3.25 3.25)
			(end -3.25 2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.38 -3.6)
			(end 2.38 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.38 -3.25)
			(end -2.38 -3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.38 3.25)
			(end -3.25 3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.38 3.6)
			(end -2.38 3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.38 -3.6)
			(end 2.38 -3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.38 -3.25)
			(end 3.25 -3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.38 3.25)
			(end 2.38 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.38 3.6)
			(end -2.38 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 3.25 -3.25)
			(end 3.25 -2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 3.25 -2.38)
			(end 3.6 -2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 3.25 2.38)
			(end 3.25 3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 3.25 3.25)
			(end 2.38 3.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 3.6 -2.38)
			(end 3.6 2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 3.6 2.38)
			(end 3.25 2.38)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_poly
			(pts
				(xy -2 -3)
				(xy 3 -3)
				(xy 3 3)
				(xy -3 3)
				(xy -3 -2)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" smd roundrect
			(at -1.23 -1.23)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at -1.23 0)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at -1.23 1.23)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0 -1.23)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0 0)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0 1.23)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 1.23 -1.23)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 1.23 0)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 1.23 1.23)
			(size 0.99 0.99)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -2.9375 -2)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at -2.9375 -1.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "3" smd roundrect
			(at -2.9375 -1)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "4" smd roundrect
			(at -2.9375 -0.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "5" smd roundrect
			(at -2.9375 0)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "6" smd roundrect
			(at -2.9375 0.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "7" smd roundrect
			(at -2.9375 1)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "8" smd roundrect
			(at -2.9375 1.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "9" smd roundrect
			(at -2.9375 2)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "10" smd roundrect
			(at -2 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "11" smd roundrect
			(at -1.5 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "12" smd roundrect
			(at -1 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "13" smd roundrect
			(at -0.5 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "14" smd roundrect
			(at 0 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "15" smd roundrect
			(at 0.5 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "16" smd roundrect
			(at 1 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "17" smd roundrect
			(at 1.5 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "18" smd roundrect
			(at 2 2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "19" smd roundrect
			(at 2.9375 2)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "20" smd roundrect
			(at 2.9375 1.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "21" smd roundrect
			(at 2.9375 1)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "22" smd roundrect
			(at 2.9375 0.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "23" smd roundrect
			(at 2.9375 0)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "24" smd roundrect
			(at 2.9375 -0.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "25" smd roundrect
			(at 2.9375 -1)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "26" smd roundrect
			(at 2.9375 -1.5)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "27" smd roundrect
			(at 2.9375 -2)
			(size 0.825 0.25)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "28" smd roundrect
			(at 2 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "29" smd roundrect
			(at 1.5 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "30" smd roundrect
			(at 1 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "31" smd roundrect
			(at 0.5 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "32" smd roundrect
			(at 0 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "33" smd roundrect
			(at -0.5 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "34" smd roundrect
			(at -1 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "35" smd roundrect
			(at -1.5 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "36" smd roundrect
			(at -2 -2.9375)
			(size 0.25 0.825)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "37" smd rect
			(at 0 0)
			(size 3.7 3.7)
			(property pad_prop_heatsink)
			(layers "F.Cu" "F.Mask")
			(zone_connect 2)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "Crystal_SMD_3225-4Pin_3.2x2.5mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SMD3225/4, Crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.txccrystal.com/images/pdf/7m-accuracy.pdf")
		(property "Reference" "usb.X2"
			(at 153.4316 100.2330 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "24MHz"
			(at 0 2.45 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -2.06 -1.71)
			(end -2.06 1.71)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.06 1.71)
			(end 2.06 1.71)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -2.1 -1.75)
			(end 2.1 1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_poly
			(pts
				(xy 1.6 -1.25)
				(xy 1.6 1.25)
				(xy -0.975 1.25)
				(xy -1.6 0.625)
				(xy -1.6 -1.25)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.8 0.8)
					(thickness 0.12)
				)
			)
		)
		(pad "1" smd roundrect
			(at -1.1 0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(pad "2" smd roundrect
			(at 1.1 0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(pad "3" smd roundrect
			(at 1.1 -0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(pad "4" smd roundrect
			(at -1.1 -0.85)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Crystal.3dshapes/Crystal_SMD_3225-4Pin_3.2x2.5mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C38"
			(at 146.6238 97.0934 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "20p"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C39"
			(at 160.4795 89.0938 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "20p"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "usb.R8"
			(at 160.3305 92.7366 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "12k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "usb.R9"
			(at 160.6858 96.2537 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C23"
			(at 158.6211 99.2818 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C25"
			(at 148.0383 100.2834 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C31"
			(at 165.0795 93.0100 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C32"
			(at 162.8908 99.7460 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C40"
			(at 159.3495 102.9346 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C41"
			(at 153.4037 104.4433 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "C_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "usb.C42"
			(at 142.5046 96.5246 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "PinHeader_2x13_P2.54mm_Vertical"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 2x13, 2.54mm pitch, double rows")
		(tags "Through hole pin header THT 2x13 2.54mm double row")
		(property "Reference" "duos.J1"
			(at 199.0505 91.8335 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MilkV-DuoS-Header1"
			(at 1.27 32.86 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 31.86)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.27 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 31.86)
			(end 3.92 31.86)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 -1.38)
			(end 3.92 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 1.27)
			(end 1.27 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.92 -1.38)
			(end 3.92 31.86)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.77 -1.78)
			(end 4.32 32.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -1.27 0)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 31.75)
			(end -1.27 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0 -1.27)
			(end 3.81 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 -1.27)
			(end 3.81 31.75)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 31.75)
			(end -1.27 31.75)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 15.24 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "3" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "4" thru_hole circle
			(at 2.54 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "5" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "6" thru_hole circle
			(at 2.54 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "7" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "8" thru_hole circle
			(at 2.54 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "9" thru_hole circle
			(at 0 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "10" thru_hole circle
			(at 2.54 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "11" thru_hole circle
			(at 0 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "12" thru_hole circle
			(at 2.54 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "13" thru_hole circle
			(at 0 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "14" thru_hole circle
			(at 2.54 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "15" thru_hole circle
			(at 0 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "16" thru_hole circle
			(at 2.54 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "17" thru_hole circle
			(at 0 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "18" thru_hole circle
			(at 2.54 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "19" thru_hole circle
			(at 0 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "20" thru_hole circle
			(at 2.54 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "21" thru_hole circle
			(at 0 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "22" thru_hole circle
			(at 2.54 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "23" thru_hole circle
			(at 0 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "24" thru_hole circle
			(at 2.54 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "25" thru_hole circle
			(at 0 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "26" thru_hole circle
			(at 2.54 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x13_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "PinHeader_2x13_P2.54mm_Vertical"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 2x13, 2.54mm pitch, double rows")
		(tags "Through hole pin header THT 2x13 2.54mm double row")
		(property "Reference" "duos.J2"
			(at 185.7333 118.2817 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MilkV-DuoS-Header2"
			(at 1.27 32.86 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 31.86)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.27 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 31.86)
			(end 3.92 31.86)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 -1.38)
			(end 3.92 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 1.27)
			(end 1.27 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.92 -1.38)
			(end 3.92 31.86)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.77 -1.78)
			(end 4.32 32.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -1.27 0)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 31.75)
			(end -1.27 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0 -1.27)
			(end 3.81 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 -1.27)
			(end 3.81 31.75)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 31.75)
			(end -1.27 31.75)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 15.24 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "3" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "4" thru_hole circle
			(at 2.54 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "5" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "6" thru_hole circle
			(at 2.54 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "7" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "8" thru_hole circle
			(at 2.54 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "9" thru_hole circle
			(at 0 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "10" thru_hole circle
			(at 2.54 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "11" thru_hole circle
			(at 0 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "12" thru_hole circle
			(at 2.54 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "13" thru_hole circle
			(at 0 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "14" thru_hole circle
			(at 2.54 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "15" thru_hole circle
			(at 0 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "16" thru_hole circle
			(at 2.54 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "17" thru_hole circle
			(at 0 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "18" thru_hole circle
			(at 2.54 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "19" thru_hole circle
			(at 0 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "20" thru_hole circle
			(at 2.54 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "21" thru_hole circle
			(at 0 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "22" thru_hole circle
			(at 2.54 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "23" thru_hole circle
			(at 0 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "24" thru_hole circle
			(at 2.54 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "25" thru_hole circle
			(at 0 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "26" thru_hole circle
			(at 2.54 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x13_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "PinHeader_2x20_P2.54mm_Vertical"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 2x20, 2.54mm pitch, double rows")
		(tags "Through hole pin header THT 2x20 2.54mm double row")
		(property "Reference" "esp32.J3"
			(at 108.6880 82.5271 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "ESP32-S3-Header1"
			(at 1.27 50.64 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 49.64)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.27 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 49.64)
			(end 3.92 49.64)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 -1.38)
			(end 3.92 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 1.27)
			(end 1.27 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.92 -1.38)
			(end 3.92 49.64)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.77 -1.78)
			(end 4.32 50.03)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -1.27 0)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 49.53)
			(end -1.27 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0 -1.27)
			(end 3.81 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 -1.27)
			(end 3.81 49.53)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 49.53)
			(end -1.27 49.53)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 24.13 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "3" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "4" thru_hole circle
			(at 2.54 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "5" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "6" thru_hole circle
			(at 2.54 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "7" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "8" thru_hole circle
			(at 2.54 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "9" thru_hole circle
			(at 0 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "10" thru_hole circle
			(at 2.54 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "11" thru_hole circle
			(at 0 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "12" thru_hole circle
			(at 2.54 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "13" thru_hole circle
			(at 0 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "14" thru_hole circle
			(at 2.54 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "15" thru_hole circle
			(at 0 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "16" thru_hole circle
			(at 2.54 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "17" thru_hole circle
			(at 0 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "18" thru_hole circle
			(at 2.54 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "19" thru_hole circle
			(at 0 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "20" thru_hole circle
			(at 2.54 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "21" thru_hole circle
			(at 0 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "22" thru_hole circle
			(at 2.54 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "23" thru_hole circle
			(at 0 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "24" thru_hole circle
			(at 2.54 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "25" thru_hole circle
			(at 0 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "26" thru_hole circle
			(at 2.54 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "27" thru_hole circle
			(at 0 33.02)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "28" thru_hole circle
			(at 2.54 33.02)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "29" thru_hole circle
			(at 0 35.56)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "30" thru_hole circle
			(at 2.54 35.56)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "31" thru_hole circle
			(at 0 38.1)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "32" thru_hole circle
			(at 2.54 38.1)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "33" thru_hole circle
			(at 0 40.64)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "34" thru_hole circle
			(at 2.54 40.64)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "35" thru_hole circle
			(at 0 43.18)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "36" thru_hole circle
			(at 2.54 43.18)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "37" thru_hole circle
			(at 0 45.72)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "38" thru_hole circle
			(at 2.54 45.72)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "39" thru_hole circle
			(at 0 48.26)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "40" thru_hole circle
			(at 2.54 48.26)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x20_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "PinHeader_2x20_P2.54mm_Vertical"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 2x20, 2.54mm pitch, double rows")
		(tags "Through hole pin header THT 2x20 2.54mm double row")
		(property "Reference" "esp32.J4"
			(at 124.8310 107.5271 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "ESP32-S3-Header2"
			(at 1.27 50.64 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 49.64)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.27 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 49.64)
			(end 3.92 49.64)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 -1.38)
			(end 3.92 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 1.27)
			(end 1.27 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.92 -1.38)
			(end 3.92 49.64)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.77 -1.78)
			(end 4.32 50.03)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -1.27 0)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 49.53)
			(end -1.27 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0 -1.27)
			(end 3.81 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 -1.27)
			(end 3.81 49.53)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 49.53)
			(end -1.27 49.53)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 24.13 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "3" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "4" thru_hole circle
			(at 2.54 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "5" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "6" thru_hole circle
			(at 2.54 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "7" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "8" thru_hole circle
			(at 2.54 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "9" thru_hole circle
			(at 0 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "10" thru_hole circle
			(at 2.54 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "11" thru_hole circle
			(at 0 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "12" thru_hole circle
			(at 2.54 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "13" thru_hole circle
			(at 0 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "14" thru_hole circle
			(at 2.54 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "15" thru_hole circle
			(at 0 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "16" thru_hole circle
			(at 2.54 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "17" thru_hole circle
			(at 0 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "18" thru_hole circle
			(at 2.54 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "19" thru_hole circle
			(at 0 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "20" thru_hole circle
			(at 2.54 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "21" thru_hole circle
			(at 0 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "22" thru_hole circle
			(at 2.54 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "23" thru_hole circle
			(at 0 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "24" thru_hole circle
			(at 2.54 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "25" thru_hole circle
			(at 0 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "26" thru_hole circle
			(at 2.54 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "27" thru_hole circle
			(at 0 33.02)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "28" thru_hole circle
			(at 2.54 33.02)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "29" thru_hole circle
			(at 0 35.56)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "30" thru_hole circle
			(at 2.54 35.56)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "31" thru_hole circle
			(at 0 38.1)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "32" thru_hole circle
			(at 2.54 38.1)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "33" thru_hole circle
			(at 0 40.64)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "34" thru_hole circle
			(at 2.54 40.64)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "35" thru_hole circle
			(at 0 43.18)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "36" thru_hole circle
			(at 2.54 43.18)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "37" thru_hole circle
			(at 0 45.72)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "38" thru_hole circle
			(at 2.54 45.72)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "39" thru_hole circle
			(at 0 48.26)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "40" thru_hole circle
			(at 2.54 48.26)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x20_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOP-4_4.4x2.6mm_P1.27mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SOP, 4 Pin (http://www.vishay.com/docs/83510/tcmt1100.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
		(tags "SOP SO")
		(property "Reference" "atx.U7"
			(at 164.8077 118.2381 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "PC817"
			(at 0 2.25 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -2.31 -1.41)
			(end 2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 -1.195)
			(end -2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 1.41)
			(end -2.31 1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 -1.41)
			(end 2.31 -1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.195)
			(end 2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.41)
			(end -2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_poly
			(pts
				(xy -3.19 -1.2)
				(xy -3.43 -1.53)
				(xy -2.95 -1.53)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
		)
		(fp_line
			(start -4.25 -1.19)
			(end -2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -4.25 1.19)
			(end -4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.55)
			(end 2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.19)
			(end -2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.19)
			(end -4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.55)
			(end -2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.55)
			(end 2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.19)
			(end 4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.19)
			(end 2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.55)
			(end -2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 -1.19)
			(end 4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 1.19)
			(end 2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_poly
			(pts
				(xy -1.55 -1.3)
				(xy 2.2 -1.3)
				(xy 2.2 1.3)
				(xy -2.2 1.3)
				(xy -2.2 -0.65)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at -3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "3" smd roundrect
			(at 3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "4" smd roundrect
			(at 3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_SO.3dshapes/SOP-4_4.4x2.6mm_P1.27mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOP-4_4.4x2.6mm_P1.27mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SOP, 4 Pin (http://www.vishay.com/docs/83510/tcmt1100.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
		(tags "SOP SO")
		(property "Reference" "atx.U8"
			(at 164.6593 112.8066 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "PC817"
			(at 0 2.25 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -2.31 -1.41)
			(end 2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 -1.195)
			(end -2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 1.41)
			(end -2.31 1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 -1.41)
			(end 2.31 -1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.195)
			(end 2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.41)
			(end -2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_poly
			(pts
				(xy -3.19 -1.2)
				(xy -3.43 -1.53)
				(xy -2.95 -1.53)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
		)
		(fp_line
			(start -4.25 -1.19)
			(end -2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -4.25 1.19)
			(end -4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.55)
			(end 2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.19)
			(end -2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.19)
			(end -4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.55)
			(end -2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.55)
			(end 2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.19)
			(end 4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.19)
			(end 2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.55)
			(end -2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 -1.19)
			(end 4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 1.19)
			(end 2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_poly
			(pts
				(xy -1.55 -1.3)
				(xy 2.2 -1.3)
				(xy 2.2 1.3)
				(xy -2.2 1.3)
				(xy -2.2 -0.65)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at -3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "3" smd roundrect
			(at 3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "4" smd roundrect
			(at 3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_SO.3dshapes/SOP-4_4.4x2.6mm_P1.27mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOP-4_4.4x2.6mm_P1.27mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SOP, 4 Pin (http://www.vishay.com/docs/83510/tcmt1100.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
		(tags "SOP SO")
		(property "Reference" "atx.U9"
			(at 158.0042 136.2089 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "PC817"
			(at 0 2.25 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -2.31 -1.41)
			(end 2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 -1.195)
			(end -2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 1.41)
			(end -2.31 1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 -1.41)
			(end 2.31 -1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.195)
			(end 2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.41)
			(end -2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_poly
			(pts
				(xy -3.19 -1.2)
				(xy -3.43 -1.53)
				(xy -2.95 -1.53)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
		)
		(fp_line
			(start -4.25 -1.19)
			(end -2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -4.25 1.19)
			(end -4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.55)
			(end 2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.19)
			(end -2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.19)
			(end -4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.55)
			(end -2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.55)
			(end 2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.19)
			(end 4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.19)
			(end 2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.55)
			(end -2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 -1.19)
			(end 4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 1.19)
			(end 2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_poly
			(pts
				(xy -1.55 -1.3)
				(xy 2.2 -1.3)
				(xy 2.2 1.3)
				(xy -2.2 1.3)
				(xy -2.2 -0.65)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at -3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "3" smd roundrect
			(at 3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "4" smd roundrect
			(at 3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_SO.3dshapes/SOP-4_4.4x2.6mm_P1.27mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "SOP-4_4.4x2.6mm_P1.27mm"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SOP, 4 Pin (http://www.vishay.com/docs/83510/tcmt1100.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py")
		(tags "SOP SO")
		(property "Reference" "atx.U10"
			(at 175.7764 119.5620 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "PC817"
			(at 0 2.25 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -2.31 -1.41)
			(end 2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 -1.195)
			(end -2.31 -1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -2.31 1.41)
			(end -2.31 1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 -1.41)
			(end 2.31 -1.195)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.195)
			(end 2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 2.31 1.41)
			(end -2.31 1.41)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_poly
			(pts
				(xy -3.19 -1.2)
				(xy -3.43 -1.53)
				(xy -2.95 -1.53)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.SilkS")
		)
		(fp_line
			(start -4.25 -1.19)
			(end -2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -4.25 1.19)
			(end -4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.55)
			(end 2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 -1.19)
			(end -2.45 -1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.19)
			(end -4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -2.45 1.55)
			(end -2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.55)
			(end 2.45 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 -1.19)
			(end 4.25 -1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.19)
			(end 2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 2.45 1.55)
			(end -2.45 1.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 -1.19)
			(end 4.25 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_line
			(start 4.25 1.19)
			(end 2.45 1.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
		)
		(fp_poly
			(pts
				(xy -1.55 -1.3)
				(xy 2.2 -1.3)
				(xy 2.2 1.3)
				(xy -2.2 1.3)
				(xy -2.2 -0.65)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd roundrect
			(at -3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at -3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "3" smd roundrect
			(at 3.1875 0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "4" smd roundrect
			(at 3.1875 -0.635)
			(size 1.625 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_SO.3dshapes/SOP-4_4.4x2.6mm_P1.27mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "atx.R10"
			(at 161.9495 123.6516 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "330"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "atx.R11"
			(at 172.5267 115.2682 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "330"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "atx.R12"
			(at 174.6529 133.1370 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "R_0402_1005Metric"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "atx.R13"
			(at 175.0399 129.6220 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "PinHeader_2x05_P2.54mm_Vertical"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 2x05, 2.54mm pitch, double rows")
		(tags "Through hole pin header THT 2x05 2.54mm double row")
		(property "Reference" "atx.J5"
			(at 168.3057 130.7950 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "ATX_FP"
			(at 1.27 12.54 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 11.54)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.27 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -1.38 11.54)
			(end 3.92 11.54)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 -1.38)
			(end 3.92 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 1.27 1.27)
			(end 1.27 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.92 -1.38)
			(end 3.92 11.54)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -1.77 -1.77)
			(end 4.32 11.93)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -1.27 0)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 11.43)
			(end -1.27 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0 -1.27)
			(end 3.81 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 -1.27)
			(end 3.81 11.43)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.81 11.43)
			(end -1.27 11.43)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 5.08 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "3" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "4" thru_hole circle
			(at 2.54 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "5" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "6" thru_hole circle
			(at 2.54 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "7" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "8" thru_hole circle
			(at 2.54 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "9" thru_hole circle
			(at 0 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(pad "10" thru_hole circle
			(at 2.54 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x05_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "HDMI_A_Amphenol_10029449-x01xLF_Horizontal"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "HDMI Type A connector, Amphenol 10029449-001TLF 10029449-001RLF 10029449-101TLF 10029449-101RLF, Right Angle(https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10029449.pdf)")
		(tags "hdmi right angle")
		(property "Reference" "conn.J6"
			(at 125.9047 62.0353 0)
			(unlocked yes)
			(layer "F.SilkS")
			(uuid "b202e8d9-20d3-4551-b1d6-3d72e0309aa6")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "HDMI_A"
			(at 0 5.9 0)
			(unlocked yes)
			(layer "F.Fab")
			(uuid "78a93a75-ad6c-4ecc-b3d0-4f70d13594e8")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "2793f6c4-4b00-4503-8b85-268c76b288d2")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "f304070a-446b-4cd4-8590-d02d7fd10875")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -7.62 -0.2)
			(end -7.62 -2.9)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "dbe0769f-0644-4ad3-af2b-5d0b2c67d675")
		)
		(fp_line
			(start -6.15 -4.62)
			(end -4.6 -4.62)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "dd327b48-cc98-482d-b275-a010839d38db")
		)
		(fp_line
			(start 5.1 -5.95)
			(end 5.1 -4.62)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "220cd223-f57c-4924-a8d1-00dcbbd9fd6a")
		)
		(fp_line
			(start 5.1 -4.62)
			(end 6.15 -4.62)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "e94dccb2-5894-4bb5-828a-5f25b8ecd5f8")
		)
		(fp_line
			(start 7.62 -2.9)
			(end 7.62 -0.2)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "95d05d21-7b5d-4915-a9bb-d2d38b3e5203")
		)
		(fp_line
			(start -6.5 3.5)
			(end 6.5 3.5)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "Dwgs.User")
			(uuid "b645f1b5-c6ca-42b6-a4b9-6edbc3557a95")
		)
		(fp_line
			(start -9.25 -5.4)
			(end -4.9 -5.4)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "4425e3e4-bfde-49cd-b6d0-87896ea0174a")
		)
		(fp_line
			(start -9.25 5)
			(end -9.25 -5.4)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "bf245106-2887-49a9-af16-cd92fb99f638")
		)
		(fp_line
			(start -4.9 -6.45)
			(end 5.4 -6.45)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "02dea6ac-a36d-48d7-988a-c35a923aacc6")
		)
		(fp_line
			(start -4.9 -5.4)
			(end -4.9 -6.45)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "50603d47-6d27-4c8b-9d77-0efd2aebd9ac")
		)
		(fp_line
			(start 5.4 -6.45)
			(end 5.4 -5.4)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "90798c12-8dcc-4413-8189-85692ba8d4eb")
		)
		(fp_line
			(start 5.4 -5.4)
			(end 9.25 -5.4)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "afbdc899-cddb-45ca-b084-59ec6644f06d")
		)
		(fp_line
			(start 9.25 -5.4)
			(end 9.25 5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "05814da5-4fe8-4f61-9292-e5ce95615e0a")
		)
		(fp_line
			(start 9.25 5)
			(end -9.25 5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "c019331a-3bd2-4377-93ed-ab05f5da9699")
		)
		(fp_line
			(start -7.5 4.5)
			(end -7.5 -4.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "de878a15-5ffd-4c00-a930-bc8309656f8e")
		)
		(fp_line
			(start -7.5 4.5)
			(end 7.5 4.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "dc39ce2a-25c2-4ba6-8c7f-bd8ac6659ea6")
		)
		(fp_line
			(start 7.5 -4.5)
			(end -7.5 -4.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "6f414c36-e87d-471d-abad-2c0b1a7347a1")
		)
		(fp_line
			(start 7.5 4.5)
			(end 7.5 -4.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "a8f5e4f2-e043-44e8-9781-fd435f9836d1")
		)
		(fp_text user "PCB Edge"
			(at 0 3.5 0)
			(unlocked yes)
			(layer "Dwgs.User")
			(uuid "9b221fb0-4b4c-471a-8049-ba8a31e28125")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(fp_text user "${REFERENCE}"
			(at 0 0.9 0)
			(unlocked yes)
			(layer "F.Fab")
			(uuid "e212668c-4a63-4dab-8915-0d32a802ac46")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd rect
			(at 4.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "9c663b5a-8519-4e5e-a5da-db85f935191a")
		)
		(pad "2" smd rect
			(at 4.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "0585a89a-ebdd-4340-a01d-1802b2111c36")
		)
		(pad "3" smd rect
			(at 3.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "307f244c-b4dc-40a8-8cb2-40d3b8135092")
		)
		(pad "4" smd rect
			(at 3.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "ebb87f58-cb05-44f1-9c9a-c861af724cf8")
		)
		(pad "5" smd rect
			(at 2.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "a8e43cd7-6956-46e0-8e07-ddafe1b29158")
		)
		(pad "6" smd rect
			(at 2.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "6a48f071-408c-48fa-a31c-e9e6e8802c67")
		)
		(pad "7" smd rect
			(at 1.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "bccdcaa0-06f5-4682-936c-03fd8ffd287d")
		)
		(pad "8" smd rect
			(at 1.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "36023a53-3022-4b8e-b1b0-31c14e2654a9")
		)
		(pad "9" smd rect
			(at 0.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "91cffe2d-f9b3-4408-8c80-d98ba47e9984")
		)
		(pad "10" smd rect
			(at 0.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "7071a5ba-391a-4563-9076-6b41b906b436")
		)
		(pad "11" smd rect
			(at -0.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "2912eba5-70d9-4b3f-8181-5ca0b1df7a89")
		)
		(pad "12" smd rect
			(at -0.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "36ab4545-bfe3-4b13-9114-cc88bce4285e")
		)
		(pad "13" smd rect
			(at -1.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "fdedc8ea-cefb-4b64-a392-6f4e4d3e0481")
		)
		(pad "14" smd rect
			(at -1.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "acefb981-8e19-4968-95ce-47897ceece83")
		)
		(pad "15" smd rect
			(at -2.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "ddf5eaaa-2671-47ec-ae23-42240de2a528")
		)
		(pad "16" smd rect
			(at -2.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "7a9f0155-9505-45ff-8e4c-3863c101e945")
		)
		(pad "17" smd rect
			(at -3.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "bd5142a5-ad31-4341-9c27-d75a1333080d")
		)
		(pad "18" smd rect
			(at -3.75 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "0aa51eb5-4270-47c4-9e5c-2ef57ccd1425")
		)
		(pad "19" smd rect
			(at -4.25 -5)
			(size 0.3 1.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "38a51d01-4274-44c4-a236-8cac38840c9d")
		)
		(pad "SH" thru_hole circle
			(at -7.85 0.9)
			(size 1.8 1.8)
			(drill 1.3)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "46c65486-2335-424a-8df3-1be34819e9be")
		)
		(pad "SH" thru_hole circle
			(at -7.25 -4)
			(size 1.8 1.8)
			(drill 1.3)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "1d788139-411a-403e-99f8-25a8d98add9b")
		)
		(pad "SH" thru_hole circle
			(at 7.25 -4)
			(size 1.8 1.8)
			(drill 1.3)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "2e2f469e-4067-4db6-96ce-615ff2163e96")
		)
		(pad "SH" thru_hole circle
			(at 7.85 0.9)
			(size 1.8 1.8)
			(drill 1.3)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "ba14efe5-ed71-4fc4-a9d9-1a47007c3f89")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_Video.3dshapes/HDMI_A_Amphenol_10029449-x01xLF_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "USB_A_Molex_67643_Horizontal"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "USB type A, Horizontal, https://www.molex.com/pdm_docs/sd/676433910_sd.pdf")
		(tags "USB_A Female Connector receptacle")
		(property "Reference" "conn.J7"
			(at 163.2356 60.8690 0)
			(layer "F.SilkS")
			(uuid "54bb8604-84db-4bba-85f6-c96301b59880")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "USB_A"
			(at 3.5 14.5 0)
			(layer "F.Fab")
			(uuid "4945ad9a-46e8-48a3-89ed-7915b4fe32f2")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "772a7bfc-9b5f-4ac2-a54a-73bd22b0f9af")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "838c5c0e-5674-467a-b1c5-de1f19abe2bf")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(fp_line
			(start -3.81 12.58)
			(end -3.81 13.1)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "a793aa9d-14d1-4b06-803f-133a28ce5593")
		)
		(fp_line
			(start -3.81 13.1)
			(end 10.81 13.1)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "b064f63c-4828-4a91-b349-b3bf2eca4044")
		)
		(fp_line
			(start -3.16 -2.38)
			(end -3.16 0.95)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "f91fc83b-7088-4246-a35a-89f88d25e05a")
		)
		(fp_line
			(start -3.16 -2.38)
			(end 10.16 -2.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "4c784483-8c83-47f0-bfaf-4c6c19ede978")
		)
		(fp_line
			(start -3.16 12.58)
			(end -3.81 12.58)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "288db5c2-69b1-41b8-865f-7c85a7b716f9")
		)
		(fp_line
			(start -3.16 12.58)
			(end -3.16 4.47)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "070d01df-f3ca-4841-83c8-ebec6014f02f")
		)
		(fp_line
			(start -0.9 -2.6)
			(end 0.9 -2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "217aca3c-f000-4746-88bd-aa296dd7edd7")
		)
		(fp_line
			(start 10.16 -2.38)
			(end 10.16 0.95)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "02c36777-48f4-4c9d-8f98-92b208bfba68")
		)
		(fp_line
			(start 10.16 4.47)
			(end 10.16 12.58)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "ad2f3113-f40c-4239-8398-7147cded0ef3")
		)
		(fp_line
			(start 10.81 12.58)
			(end 10.16 12.58)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "938a787d-3f82-431b-a17d-82dfe3ae9a21")
		)
		(fp_line
			(start 10.81 13.1)
			(end 10.81 12.58)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "5e51cd6d-3473-447e-8f33-bd427ee1275b")
		)
		(fp_line
			(start -4.2 12.19)
			(end -3.55 12.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "18e5ce2d-caaa-4d3c-a542-7c3d18f97bf8")
		)
		(fp_line
			(start -4.2 13.49)
			(end -4.2 12.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "06829ac4-e295-406d-86d5-410547984fb4")
		)
		(fp_line
			(start -4.2 13.49)
			(end 11.2 13.49)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "d11095f3-dd4f-4781-98a4-dce90b4b2489")
		)
		(fp_line
			(start -3.55 -2.77)
			(end -3.55 0.76)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "ce2d28e6-1ba7-447c-8dd9-e734eaa7cf23")
		)
		(fp_line
			(start -3.55 -2.77)
			(end 10.55 -2.77)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "427be8c6-0c31-4f6f-a301-9e54c0789ae0")
		)
		(fp_line
			(start -3.55 12.19)
			(end -3.55 4.66)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "152139b9-acba-453c-aa70-fc4d6a36dfe6")
		)
		(fp_line
			(start 10.55 -2.77)
			(end 10.55 0.76)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "1f0421a0-14b3-4ffa-b57a-0c3d8df92509")
		)
		(fp_line
			(start 10.55 12.19)
			(end 10.55 4.66)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "54517dd9-a195-4151-945d-0106a68b8b8f")
		)
		(fp_line
			(start 11.2 12.19)
			(end 10.55 12.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "414472a4-9d2e-4e19-8ae7-eb31a0bf21f7")
		)
		(fp_line
			(start 11.2 13.49)
			(end 11.2 12.19)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "26c01cf3-bd9e-4da7-93f1-1f5ad1dbc225")
		)
		(fp_arc
			(start -3.55 4.66)
			(mid -5.078208 2.71)
			(end -3.55 0.76)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "c1f6c59f-e338-4485-a523-5ce7bd49d9a1")
		)
		(fp_arc
			(start 10.55 0.76)
			(mid 12.078208 2.71)
			(end 10.55 4.66)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "8bb4c650-5211-4bf9-a664-f9d7e227beba")
		)
		(fp_line
			(start -3.7 12.69)
			(end -3.7 12.99)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "52298c0b-6f17-44e9-b069-886decd39f9e")
		)
		(fp_line
			(start -3.7 12.99)
			(end 10.7 12.99)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "4509d9ac-36d5-46bf-9a6d-ddc13badd809")
		)
		(fp_line
			(start -3.05 -2.27)
			(end 10.05 -2.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "74d3a8db-6baa-4186-8cb6-d911e301e4ec")
		)
		(fp_line
			(start -3.05 9.27)
			(end 10.05 9.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "016afd6a-479c-4d73-b692-7fb299615b47")
		)
		(fp_line
			(start -3.05 12.69)
			(end -3.7 12.69)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "2e9d6e5e-7b40-4c0f-bcc2-52f4b106f1a5")
		)
		(fp_line
			(start -3.05 12.69)
			(end -3.05 -2.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "8d9ecb18-e0f8-42fc-a4af-5ef5f1eae488")
		)
		(fp_line
			(start -1 -2.27)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "aa17ced7-0a99-42d8-9b70-30803e46478b")
		)
		(fp_line
			(start 0 -1.27)
			(end 1 -2.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "88444d6a-9095-428c-97b4-6fb0a4f27907")
		)
		(fp_line
			(start 10.05 -2.27)
			(end 10.05 12.69)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "520befb7-a87f-433b-9bca-ff78de6e9391")
		)
		(fp_line
			(start 10.7 12.69)
			(end 10.05 12.69)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "a8fe9cd4-c50d-4756-bdbe-b03751ef0f5e")
		)
		(fp_line
			(start 10.7 12.99)
			(end 10.7 12.69)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "cdb0e725-3de8-4555-9c85-c7030b579933")
		)
		(fp_text user "${REFERENCE}"
			(at 3.5 3.7 0)
			(layer "F.Fab")
			(uuid "99fd78be-c468-47ed-a9d2-012ea8c5cd43")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.6 1.5)
			(drill 0.95)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "1cf45211-9e76-4573-8020-67898c7298e6")
		)
		(pad "2" thru_hole circle
			(at 2.5 0)
			(size 1.6 1.6)
			(drill 0.95)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "5530e3e2-6d46-4b0e-9e6a-9a7a34e80cf8")
		)
		(pad "3" thru_hole circle
			(at 4.5 0)
			(size 1.6 1.6)
			(drill 0.95)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "ea31539d-fceb-48a9-b853-2fded4bf6581")
		)
		(pad "4" thru_hole circle
			(at 7 0)
			(size 1.6 1.6)
			(drill 0.95)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "3ecb47da-e2e1-4eba-89b8-72b808fd4109")
		)
		(pad "5" thru_hole circle
			(at -3.07 2.71)
			(size 3 3)
			(drill 2.3)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "874cda19-d890-46f0-8904-6628ed118322")
		)
		(pad "5" thru_hole circle
			(at 10.07 2.71)
			(size 3 3)
			(drill 2.3)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "4116e289-901a-4ecf-a607-51921cceb415")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_USB.3dshapes/USB_A_Molex_67643_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "USB_C_Receptacle_HRO_TYPE-C-31-M-12"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "USB Type-C receptacle for USB 2.0 and PD, http://www.krhro.com/uploads/soft/180320/1-1P320120243.pdf")
		(tags "usb usb-c 2.0 pd")
		(property "Reference" "conn.J8"
			(at 145.1899 58.6008 0)
			(layer "F.SilkS")
			(uuid "a144ce76-cc23-44fb-8108-bf18e64a4c3d")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "USB_C"
			(at 0 5.1 0)
			(layer "F.Fab")
			(uuid "0ca5cf76-e951-4e58-a402-14dc42a864b3")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "2b954944-56ad-4032-bee5-bd7186324aef")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "9d55800b-f601-4afa-9fad-eee332310ae0")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -4.7 -1.9)
			(end -4.7 0.1)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "9513b845-7495-41b4-99da-c8a12a5f4b76")
		)
		(fp_line
			(start -4.7 2)
			(end -4.7 3.9)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "7abeef8d-db92-4e88-b3d6-7c7e4efa4938")
		)
		(fp_line
			(start -4.7 3.9)
			(end 4.7 3.9)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "f40329f5-4d09-479c-8f81-97fdcd13c5cd")
		)
		(fp_line
			(start 4.7 -1.9)
			(end 4.7 0.1)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "177e7db1-b916-4e65-ace8-532e6e1f85db")
		)
		(fp_line
			(start 4.7 2)
			(end 4.7 3.9)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "bd122681-67e3-4c23-b564-57e345c7c818")
		)
		(fp_line
			(start -5.32 -5.27)
			(end -5.32 4.15)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "d939342c-cab3-429e-ad71-738d34173267")
		)
		(fp_line
			(start -5.32 -5.27)
			(end 5.32 -5.27)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "3215d7dd-650e-4c6a-86e5-bc970c8d9c6c")
		)
		(fp_line
			(start -5.32 4.15)
			(end 5.32 4.15)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "c38cb6a1-740b-49d2-b49e-f8ce3382fe48")
		)
		(fp_line
			(start 5.32 -5.27)
			(end 5.32 4.15)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "3b610068-7f90-495b-a772-9a6b7e6a55c9")
		)
		(fp_line
			(start -4.47 -3.65)
			(end -4.47 3.65)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "47095738-bb75-4e91-802c-f92840c443b3")
		)
		(fp_line
			(start -4.47 -3.65)
			(end 4.47 -3.65)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "6142486d-ba8a-4b38-a6ca-d52b6a020ef2")
		)
		(fp_line
			(start -4.47 3.65)
			(end 4.47 3.65)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "84966fee-864e-4cdc-8345-c62bca33694f")
		)
		(fp_line
			(start 4.47 -3.65)
			(end 4.47 3.65)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "f6b3cf35-21be-4e1f-8c99-3404cfc41d3f")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(uuid "9189a13a-f353-4ddb-8257-370c54398cd0")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at -2.89 -2.6)
			(size 0.65 0.65)
			(drill 0.65)
			(layers "*.Cu" "*.Mask")
			(uuid "e13b4b37-788a-41d5-87ca-c66be43ee32d")
		)
		(pad "" np_thru_hole circle
			(at 2.89 -2.6)
			(size 0.65 0.65)
			(drill 0.65)
			(layers "*.Cu" "*.Mask")
			(uuid "4558f1f0-2fa3-46e1-a220-284fa2707bb5")
		)
		(pad "A1" smd rect
			(at -3.25 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "245fae56-8b58-4bd8-bbf1-36624dc3fa3e")
		)
		(pad "A4" smd rect
			(at -2.45 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "412cd3c1-0d89-4ca6-be0e-1b17d8471f5a")
		)
		(pad "A5" smd rect
			(at -1.25 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "93953890-acba-456b-bb6d-b1e79179ffa0")
		)
		(pad "A6" smd rect
			(at -0.25 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "6a642da3-3122-4031-a6e9-68498b0f5bb9")
		)
		(pad "A7" smd rect
			(at 0.25 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "01b9b129-063c-4bae-b620-9610006254cb")
		)
		(pad "A8" smd rect
			(at 1.25 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "46ecdf8a-0917-4257-a388-b77e7451dc23")
		)
		(pad "A9" smd rect
			(at 2.45 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "a35f3da7-7460-43f1-99b7-9ed521817778")
		)
		(pad "A12" smd rect
			(at 3.25 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "3795b0f1-50f9-473e-9d26-381fc08b3c2d")
		)
		(pad "B1" smd rect
			(at 3.25 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "c9e8a0db-2a60-41d9-b783-6c4e64a8fb5d")
		)
		(pad "B4" smd rect
			(at 2.45 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "51b193ee-c8c2-4ee6-8d8c-14b79a2c1520")
		)
		(pad "B5" smd rect
			(at 1.75 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "45f8f791-f545-4341-9848-fb81a03703a6")
		)
		(pad "B6" smd rect
			(at 0.75 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "efc27675-62a0-44de-8210-29c2190dd309")
		)
		(pad "B7" smd rect
			(at -0.75 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "96622dcb-c1cc-4b7d-8455-8cd0ce1e5c34")
		)
		(pad "B8" smd rect
			(at -1.75 -4.045)
			(size 0.3 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "09bb6e12-e7e5-4788-b43e-4cc6c50a557a")
		)
		(pad "B9" smd rect
			(at -2.45 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "70539c09-2020-4a42-a156-43d1513170d0")
		)
		(pad "B12" smd rect
			(at -3.25 -4.045)
			(size 0.6 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(uuid "eda87c04-3a59-4e2c-a9bd-f59ed31672aa")
		)
		(pad "S1" thru_hole oval
			(at -4.32 -3.13)
			(size 1 2.1)
			(drill oval 0.6 1.7)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "69c3dc88-a37e-49ef-ae4d-497d3191ad5b")
		)
		(pad "S1" thru_hole oval
			(at -4.32 1.05)
			(size 1 1.6)
			(drill oval 0.6 1.2)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "5991ca6f-c5c1-4692-8fe9-cf4b7ca50c4b")
		)
		(pad "S1" thru_hole oval
			(at 4.32 -3.13)
			(size 1 2.1)
			(drill oval 0.6 1.7)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "af5ae63f-ef36-487e-a6b8-831b84890f25")
		)
		(pad "S1" thru_hole oval
			(at 4.32 1.05)
			(size 1 1.6)
			(drill oval 0.6 1.2)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "e783dde5-f762-4528-9b55-9220820b0b1c")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_USB.3dshapes/USB_C_Receptacle_HRO_TYPE-C-31-M-12.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "RJ45_Amphenol_RJHSE538X"
		(version 20241229)
		(generator "pcbnew")
		(generator_version "9.0")
		(layer "F.Cu")
		(descr "Shielded, 2 LED, https://www.amphenolcanada.com/ProductSearch/drawings/AC/RJHSE538X.pdf")
		(tags "RJ45 8p8c ethernet cat5")
		(property "Reference" "conn.J9"
			(at 193.1099 61.6090 0)
			(layer "F.SilkS")
			(uuid "13c81d42-f262-40dc-9f85-1bb1b4b4f442")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "RJ45"
			(at 3.56 9.5 0)
			(layer "F.Fab")
			(uuid "59471766-49db-4528-9faa-6760d9facbf8")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "f1907e37-fd35-4877-90e5-6ffc7d1f140d")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "09f2a25d-4757-464e-965e-ad6e47cee71b")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(fp_line
			(start -5.5 -1.2)
			(end -5 -0.7)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "a708e541-9c13-4e2b-8f36-b943bb5d2e9b")
		)
		(fp_line
			(start -5.5 -0.2)
			(end -5.5 -1.2)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "d5389201-0dc7-4dbe-8080-6b240eb5d94e")
		)
		(fp_line
			(start -5 -0.7)
			(end -5.5 -0.2)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "b3ed8163-51d0-489c-bdc6-07fc2122a50c")
		)
		(fp_line
			(start -4.805 -8.11)
			(end -4.805 -0.5)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "f27403b6-27a7-46d7-827b-282c51ec8293")
		)
		(fp_line
			(start -4.805 -8.11)
			(end 11.925 -8.11)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "4d90ada0-9ea8-4e0c-86e2-3bbe9f0867ad")
		)
		(fp_line
			(start -4.805 7.86)
			(end -4.805 2.3)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "c25a911e-86d2-41ee-8337-f0d3e0f4a315")
		)
		(fp_line
			(start -4.805 7.86)
			(end 11.925 7.86)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "26a353e7-5229-4bef-8089-1d75ccf53a96")
		)
		(fp_line
			(start 11.925 -8.11)
			(end 11.925 -0.5)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "8c4e6aaf-6266-4a8c-bfcc-20afce175349")
		)
		(fp_line
			(start 11.925 7.86)
			(end 11.925 2.3)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "de76df82-608a-42ed-981b-71ec94761eb3")
		)
		(fp_line
			(start -6.22 -8.5)
			(end -6.22 8.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "46111364-95d9-4bcd-91c1-5f71575237af")
		)
		(fp_line
			(start -6.22 -8.5)
			(end 13.34 -8.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "5abd249d-97a4-4af7-b2af-919fa386d375")
		)
		(fp_line
			(start -6.22 8.25)
			(end 13.34 8.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "408b78a1-470e-49af-9801-12799cf3cbeb")
		)
		(fp_line
			(start 13.34 -8.5)
			(end 13.34 8.25)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "62d75584-17df-43ae-979c-b3626e4bec14")
		)
		(fp_line
			(start -4.695 -7)
			(end -4.695 7.75)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "9110cf1b-86cc-4700-b44c-b41a48836866")
		)
		(fp_line
			(start -4.695 -7)
			(end -3.695 -8)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "03521e42-96e4-430a-b77a-060597b1d551")
		)
		(fp_line
			(start -4.695 7.75)
			(end 11.815 7.75)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "3328fcd3-6c73-4fa7-8893-88cf6adccf40")
		)
		(fp_line
			(start -3.695 -8)
			(end 11.815 -8)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "c357f903-25cd-4bf8-b5a7-c15b95816f5b")
		)
		(fp_line
			(start 11.815 -8)
			(end 11.815 7.75)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "6d9ef0af-fe0e-40c7-998c-bce6b7c95ab9")
		)
		(fp_text user "${REFERENCE}"
			(at 3.56 -6 0)
			(layer "F.Fab")
			(uuid "10729996-7d90-434c-b57c-7876234c08f9")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at -2.79 -2.54)
			(size 3.25 3.25)
			(drill 3.25)
			(layers "*.Cu" "*.Mask")
			(uuid "3974a725-eddb-4831-b769-7e37de38e836")
		)
		(pad "" np_thru_hole circle
			(at 9.91 -2.54)
			(size 3.25 3.25)
			(drill 3.25)
			(layers "*.Cu" "*.Mask")
			(uuid "143ee3c9-5e78-4b6e-b8d0-5c9ea2eeecd5")
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "4cf6c3e4-f39c-4d78-98ac-4f76742cdd87")
		)
		(pad "2" thru_hole circle
			(at 1.016 1.78)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "e962525d-f8fe-4e0d-8720-570e38165a66")
		)
		(pad "3" thru_hole circle
			(at 2.032 0)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "6e1ca5a2-30cb-4c66-8ae3-2f8042a0adb2")
		)
		(pad "4" thru_hole circle
			(at 3.048 1.78)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "3e51b1ae-c9f4-46ba-8e3a-3fbc3347f364")
		)
		(pad "5" thru_hole circle
			(at 4.064 0)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "9b25d743-d864-44b9-becb-9d606a4d5833")
		)
		(pad "6" thru_hole circle
			(at 5.08 1.78)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "222a7cb1-a7aa-44d4-bc03-b867290fa966")
		)
		(pad "7" thru_hole circle
			(at 6.096 0)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "0e72bde1-33ed-42dc-93a0-9e3b156b9053")
		)
		(pad "8" thru_hole circle
			(at 7.112 1.78)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "83baf52f-5173-4db0-8b46-729fc67304bc")
		)
		(pad "9" thru_hole circle
			(at -3.3 6.6)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "d4755931-b170-4690-9641-07aa8b9cdb73")
		)
		(pad "10" thru_hole circle
			(at -1.01 6.6)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "6e5c169c-4e81-43e9-bea6-05e4cb3fb3af")
		)
		(pad "11" thru_hole circle
			(at 8.13 6.6)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "1edffe82-c9de-42bd-b9fc-b72571c28c81")
		)
		(pad "12" thru_hole circle
			(at 10.42 6.6)
			(size 1.5 1.5)
			(drill 0.89)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "814cc633-f443-4325-b00e-201d5ba933d9")
		)
		(pad "SH" thru_hole circle
			(at -4.57 0.89)
			(size 2.3 2.3)
			(drill 1.57)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "35ea5947-1971-4635-9136-e62252c7ec39")
		)
		(pad "SH" thru_hole circle
			(at 11.69 0.89)
			(size 2.3 2.3)
			(drill 1.57)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(uuid "552d06d5-8661-41df-a55c-7b8f1102c983")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_RJ.3dshapes/RJ45_Amphenol_RJHSE538X.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

	(footprint "Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal"
		(version 20241229)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Hirose FH12, FFC/FPC connector, FH12-15S-0.5SH, 15 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator")
		(tags "connector Hirose FH12 horizontal")
		(property "Reference" "conn.J10"
			(at 139.2691 127.0137 0)
			(layer "F.SilkS")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "CSI_FPC_15"
			(at 0 5.6 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(fp_line
			(start -5.4 -1.3)
			(end -5.4 0.04)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -5.4 2.76)
			(end -5.4 4.5)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -5.4 4.5)
			(end 5.4 4.5)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -3.91 -1.3)
			(end -5.4 -1.3)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start -3.91 -1.3)
			(end -3.91 -2.5)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 3.91 -1.3)
			(end 5.4 -1.3)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 5.4 -1.3)
			(end 5.4 0.04)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_line
			(start 5.4 4.5)
			(end 5.4 2.76)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
		)
		(fp_rect
			(start -6.81 -3)
			(end 6.81 4.9)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
		)
		(fp_line
			(start -5.3 -1.2)
			(end -5.3 3.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -5.3 3.4)
			(end -4.7 3.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -5.2 3.7)
			(end -5.2 4.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -5.2 4.4)
			(end 0 4.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -4.7 3.4)
			(end -4.7 3.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -4.7 3.7)
			(end -5.2 3.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -4 -1.2)
			(end -3.5 -0.492893)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -3.5 -0.492893)
			(end -3 -1.2)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0 -1.2)
			(end -5.3 -1.2)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0 -1.2)
			(end 5.3 -1.2)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.7 3.4)
			(end 4.7 3.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.7 3.7)
			(end 5.2 3.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.2 3.7)
			(end 5.2 4.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.2 4.4)
			(end 0 4.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.3 -1.2)
			(end 5.3 3.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.3 3.4)
			(end 4.7 3.4)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 3.7 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd rect
			(at -3.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "2" smd rect
			(at -3 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "3" smd rect
			(at -2.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "4" smd rect
			(at -2 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "5" smd rect
			(at -1.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "6" smd rect
			(at -1 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "7" smd rect
			(at -0.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "8" smd rect
			(at 0 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "9" smd rect
			(at 0.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "10" smd rect
			(at 1 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "11" smd rect
			(at 1.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "12" smd rect
			(at 2 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "13" smd rect
			(at 2.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "14" smd rect
			(at 3 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "15" smd rect
			(at 3.5 -1.85)
			(size 0.3 1.3)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "MP" smd rect
			(at -5.4 1.4)
			(size 1.8 2.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(pad "MP" smd rect
			(at 5.4 1.4)
			(size 1.8 2.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_FFC-FPC.3dshapes/Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

)