===== > export PAGER=cat SYSTEMD_PAGER=cat; readlink -f /run/current-system; cat /proc/cmdline; ls /proc/device-tree/chosen/canaan,stage1-splash; ls /dev/fb0; systemctl is-active shell k230-drm-splash seatd firewall; dmesg | grep -E "stage 1|canaan_panel_prepare|PHY_STATUS"; cat /sys/kernel/debug/dri/0/clients; modetest -h; echo FIRST_MODE_IDLE_INSPECTED =====
export PAGER=cat SYSTEMD_PAGER=cat; readlink -f /run/current-system; cat /proc/cmdline; ls /proc/device-tree/chosen/canaan,stage1-splash; ls /dev/fb0; systemctl is-active shell k230-drm-splash seatd firewall; dmesg | grep -E "stage 1|canaan_panel_prepare|PHY_STATUS"; cat /sys/kernel/debug/dri/0/clients; modetest -h; echo FIRST_MODE_IDLE_INSPECTED
[?2004l
/nix/store/24h4sb1msncgbasnwl3ckdlxqf9v2g6r-nixos-system-nixos-26.11.20260919.20b1ddd
consoleblank=0 console=ttyS0,115200n8 root=fstab loglevel=4 lsm=landlock,yama,bpf loglevel=7 init=/nix/store/24h4sb1msncgbasnwl3ckdlxqf9v2g6r-nixos-system-nixos-26.11.20260919.20b1ddd/init systemd.mask=shell.service systemd.mask=k230-drm-splash.service
/proc/device-tree/chosen/canaan,stage1-splash
ls: cannot access '/dev/fb0': No such file or directory
inactive
inactive
active
active
[    2.807108] canaan-drm soc:display-subsystem: [drm:canaan_drm_bind] stage 1 splash: leaving fbdev unset
             command  tgid dev master a   uid      magic
usage: modetest [-acDdefMoPpsCvrw]

 Query options:

	-c	list connectors
	-e	list encoders
	-f	list framebuffers
	-p	list CRTCs and planes (pipes)

 Test options:

	-P <plane_id>@<crtc_id>:<w>x<h>[+<x>+<y>][*<scale>][@<format>]	set a plane, see 'plane-topology'
	-s <connector_id>[,<connector_id>][@<crtc_id>]:mode[@<format>]	set a mode, see 'mode-topology'
		where mode can be specified as:
		<hdisp>x<vdisp>[-<vrefresh>]
		<hdisp>,<hss>,<hse>,<htot>,<vdisp>,<vss>,<vse>,<vtot>-<vrefresh>
		#<mode index>
	-C	test hw cursor
	-v	test vsynced page flipping
	-r	set the preferred mode for all connectors
	-w <obj_id>:<prop_name>:<value>	set property, see 'property'
	-a 	use atomic API
	-F pattern1,pattern2	specify fill patterns
	-S <random seed>	specify seed of noise patterns
	-o <desired file path> 	 Dump writeback output buffer to file

 Generic options:

	-d	drop master after mode set
	-M module	use the given driver
	-D device	use the given device

	Default is to dump all info.

Plane Topology is defined as:
	plane-topology	::= plane-id '@' crtc-id ':' width 'x' height ( <plane-offsets> )? ;
	plane-offsets	::= '+' x-offset '+' y-offset ( <plane-scale> )? ;
	plane-scale	::= '*' scale ( <plane-format> )? ;
	plane-format	::= '@' format ;

Mode Topology is defined as:
	mode-topology	::= connector-id ( ',' connector-id )* ( '@' crtc-id )? ':' <mode-selection> ( '@' format )? ;
	mode-selection	::=  <indexed-mode> | <named-mode> | <custom-mode> ;
	indexed-mode	::=  '#' mode-index ;
	named-mode	::=  width 'x' height ( '-' vrefresh )? ;
	custom-mode	::=  hdisplay ',' hsyncstart ',' hsyncend ',' htotal ',' vdisplay ',' vsyncstart ',' vsyncend ',' vtotal '-' vrefresh ;

Property is defined as:
	property	::= object-id ':' property-name ':' value ;
FIRST_MODE_IDLE_INSPECTED
[?2004h

[]0;root@nixos: ~root@nixos:~]# 
[?2004l
[?2004h

[]0;root@nixos: ~root@nixos:~]#