(kicad_pcb
	(version 20260206)
	(generator "atmosmesh-room-generator")
	(generator_version "10.0")
	(general (thickness 1.6) (legacy_teardrops no))
	(paper "A4")
	(title_block
		(title "AtmosMesh Room protected carrier")
		(date "2026-08-28")
		(rev "PROVISIONAL A")
		(company "AtmosMesh")
		(comment 1 "PARKED - the build target is a 31x27 perfboard, not this board")
	)
	(layers
		(0 "F.Cu" signal)
		(2 "B.Cu" signal)
		(9 "F.Adhes" user "F.Adhesive")
		(11 "B.Adhes" user "B.Adhesive")
		(13 "F.Paste" user)
		(15 "B.Paste" user)
		(5 "F.SilkS" user "F.SilkS")
		(7 "B.SilkS" user "B.Silkscreen")
		(1 "F.Mask" user)
		(3 "B.Mask" user)
		(17 "Dwgs.User" user "Dwgs.User")
		(19 "Cmts.User" user "User.Comments")
		(21 "Eco1.User" user "User.Eco1")
		(23 "Eco2.User" user "User.Eco2")
		(25 "Edge.Cuts" user)
		(27 "Margin" user)
		(31 "F.CrtYd" user "F.Courtyard")
		(29 "B.CrtYd" user "B.Courtyard")
		(35 "F.Fab" user)
		(33 "B.Fab" user)
	)
	(setup (pad_to_mask_clearance 0) (allow_soldermask_bridges_in_footprints no))
	(net 1 "+3V3")
	(net 2 "+5V_DOMAIN")
	(net 3 "+5V_EXT")
	(net 4 "+5V_USB_CONFIRMED")
	(net 5 "BEEP_S")
	(net 6 "GND")
	(net 7 "GPIO16_SDS_RX")
	(net 8 "GPIO17_SDS_TX")
	(net 9 "GPIO21_SDA")
	(net 10 "GPIO22_SCL")
	(net 11 "GPIO25_BEEP")
	(net 12 "GPIO33_PIR_N")
	(net 13 "LED_3V3_A")
	(net 14 "LED_PIR_A")
	(net 15 "LED_SDS_A")
	(net 16 "PIR_5V_PROTECTED")
	(net 17 "PIR_5V_RAW")
	(net 18 "PIR_BASE")
	(net 19 "PIR_OUT")
	(net 20 "SCL_EXT")
	(net 21 "SDA_EXT")
	(net 22 "SDS_5V_PROTECTED")
	(net 23 "SDS_RXD")
	(net 24 "SDS_TXD")
	(net 25 "unconnected-(J_VEML-Pin_2-Pad2)")
	(net 26 "unconnected-(U1-EN-Pad15)")
	(net 27 "unconnected-(U1-GPIO1-Pad28)")
	(net 28 "unconnected-(U1-GPIO2-Pad19)")
	(net 29 "unconnected-(U1-GPIO3-Pad27)")
	(net 30 "unconnected-(U1-GPIO4-Pad20)")
	(net 31 "unconnected-(U1-GPIO5-Pad23)")
	(net 32 "unconnected-(U1-GPIO12-Pad4)")
	(net 33 "unconnected-(U1-GPIO13-Pad3)")
	(net 34 "unconnected-(U1-GPIO14-Pad5)")
	(net 35 "unconnected-(U1-GPIO15-Pad18)")
	(net 36 "unconnected-(U1-GPIO18-Pad24)")
	(net 37 "unconnected-(U1-GPIO19-Pad25)")
	(net 38 "unconnected-(U1-GPIO23-Pad30)")
	(net 39 "unconnected-(U1-GPIO26-Pad7)")
	(net 40 "unconnected-(U1-GPIO27-Pad6)")
	(net 41 "unconnected-(U1-GPIO32-Pad10)")
	(net 42 "unconnected-(U1-GPIO34-Pad12)")
	(net 43 "unconnected-(U1-GPIO35-Pad11)")
	(net 44 "unconnected-(U1-GPIO36-Pad14)")
	(net 45 "unconnected-(U1-GPIO39-Pad13)")
	(footprint "room:Ideaspark_30Pin_Provisional"
		(layer "F.Cu")
		(uuid "89ffd6c1-1c31-513b-a305-c9626f70c05e")
		(at 124.0 68.0)

		(property "Reference" "U1"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e2e806ec-977e-5890-9131-ccd8c828a2c3")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "IDEASPARK_ESP32_1V14_TFT_30PIN"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "74ed2370-afc3-5c84-96b1-83f0811b350f")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Ideaspark ESP32-WROOM-32 1.14 inch TFT board, 30-pin socket; pin names confirmed, row spacing still to measure"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "8c2f711f-fa7b-516c-9d4f-c812900bb9da")
			(effects (font (size 1 1)))
		)
		(path "/28eaccc9-bfc9-5967-9a04-738910ad48a5")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 26.650000000000006 36.81)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "ba4c9a50-895b-59d2-b99d-a5eff21e7676"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 4 "+5V_USB_CONFIRMED") (uuid "12f44686-f2ef-5ab4-ac2b-8b62e81baf3d") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "120c73f4-8914-565a-a016-f13fd1aa6b0c") )
		(pad "3" thru_hole circle (at 0.000 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 33 "unconnected-(U1-GPIO13-Pad3)") (uuid "869bfedf-34d2-550a-8b14-d2babddf6b97") )
		(pad "4" thru_hole circle (at 0.000 7.620) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 32 "unconnected-(U1-GPIO12-Pad4)") (uuid "8cbddcb3-f138-5fa3-ab90-b2be1f26f501") )
		(pad "5" thru_hole circle (at 0.000 10.160) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 34 "unconnected-(U1-GPIO14-Pad5)") (uuid "c9975e4e-b57e-5e8e-9507-1f28f6570e5b") )
		(pad "6" thru_hole circle (at 0.000 12.700) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 40 "unconnected-(U1-GPIO27-Pad6)") (uuid "9f8b809b-dd69-5a15-a677-31689560964f") )
		(pad "7" thru_hole circle (at 0.000 15.240) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 39 "unconnected-(U1-GPIO26-Pad7)") (uuid "1cd0f06d-dca2-5102-aeb2-70964fb8bd79") )
		(pad "8" thru_hole circle (at 0.000 17.780) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 11 "GPIO25_BEEP") (uuid "4de09d33-1851-5cc6-b340-c741139ea9d0") )
		(pad "9" thru_hole circle (at 0.000 20.320) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 12 "GPIO33_PIR_N") (uuid "0f2cddc1-5c53-5e6f-aa50-1bca30b4c509") )
		(pad "10" thru_hole circle (at 0.000 22.860) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 41 "unconnected-(U1-GPIO32-Pad10)") (uuid "10b569e2-49c6-5928-bdd3-ff23f17eef15") )
		(pad "11" thru_hole circle (at 0.000 25.400) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 43 "unconnected-(U1-GPIO35-Pad11)") (uuid "3044ea51-1e39-5ed2-8955-52096512a730") )
		(pad "12" thru_hole circle (at 0.000 27.940) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 42 "unconnected-(U1-GPIO34-Pad12)") (uuid "e5c25095-e0cd-5ecf-8248-d3f446156668") )
		(pad "13" thru_hole circle (at 0.000 30.480) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 45 "unconnected-(U1-GPIO39-Pad13)") (uuid "7f806b7a-c4ed-5bf4-9027-48018f4d56c5") )
		(pad "14" thru_hole circle (at 0.000 33.020) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 44 "unconnected-(U1-GPIO36-Pad14)") (uuid "e3e088ef-9012-5bed-a8b1-8784a862b5c2") )
		(pad "15" thru_hole circle (at 0.000 35.560) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 26 "unconnected-(U1-EN-Pad15)") (uuid "f35f34d7-2f98-5027-b4c2-cc635dd6e631") )
		(pad "16" thru_hole circle (at 25.400 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "cc1983cb-04df-5b75-bc98-27fb60c6eba0") )
		(pad "17" thru_hole circle (at 25.400 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "992cd67e-942a-57fc-aef9-1e8abe6d688b") )
		(pad "18" thru_hole circle (at 25.400 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 35 "unconnected-(U1-GPIO15-Pad18)") (uuid "a08145a4-4a2c-554d-b6ea-985b50e04c93") )
		(pad "19" thru_hole circle (at 25.400 7.620) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 28 "unconnected-(U1-GPIO2-Pad19)") (uuid "c96ed582-25d4-5fa2-8553-026c717e3fa6") )
		(pad "20" thru_hole circle (at 25.400 10.160) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 30 "unconnected-(U1-GPIO4-Pad20)") (uuid "4475a3cb-2b56-5597-a0c4-e7a0b61891bd") )
		(pad "21" thru_hole circle (at 25.400 12.700) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 7 "GPIO16_SDS_RX") (uuid "e166cba9-a4fe-52aa-b36b-6b93d35cf677") )
		(pad "22" thru_hole circle (at 25.400 15.240) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 8 "GPIO17_SDS_TX") (uuid "b59062fc-202f-54e5-a91d-d8a8809290bc") )
		(pad "23" thru_hole circle (at 25.400 17.780) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 31 "unconnected-(U1-GPIO5-Pad23)") (uuid "f9f15287-3777-5b40-8629-ac3fabf89a7a") )
		(pad "24" thru_hole circle (at 25.400 20.320) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 36 "unconnected-(U1-GPIO18-Pad24)") (uuid "5a35074a-4850-54d3-94a6-8a3a16081842") )
		(pad "25" thru_hole circle (at 25.400 22.860) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 37 "unconnected-(U1-GPIO19-Pad25)") (uuid "378414d4-8821-540c-9583-348eb0626eab") )
		(pad "26" thru_hole circle (at 25.400 25.400) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 9 "GPIO21_SDA") (uuid "40e59f70-a3a2-5383-a7fa-5dba5f46c39d") )
		(pad "27" thru_hole circle (at 25.400 27.940) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 29 "unconnected-(U1-GPIO3-Pad27)") (uuid "660c2114-f08d-5640-b53c-657d05d09103") )
		(pad "28" thru_hole circle (at 25.400 30.480) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 27 "unconnected-(U1-GPIO1-Pad28)") (uuid "65116ed4-64fe-5534-80f4-8218b0264122") )
		(pad "29" thru_hole circle (at 25.400 33.020) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 10 "GPIO22_SCL") (uuid "4df6e3d9-4ff5-54b1-9e5d-db14402cf9f4") )
		(pad "30" thru_hole circle (at 25.400 35.560) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 38 "unconnected-(U1-GPIO23-Pad30)") (uuid "cca31293-678b-5b7b-b397-eb3ad9927579") )
	)
	(footprint "room:PinHeader_1x05_P2.54mm"
		(layer "F.Cu")
		(uuid "fed4b357-9b49-541c-9fce-fec8ae5cb922")
		(at 103.5 70.0)

		(property "Reference" "J_VEML"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "f3a4a68d-637a-561f-8664-79875b9bbb47")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "VEML7700 VIN/3Vo/GND/SCL/SDA"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "7233e461-3c1f-5417-90b1-54d38ba9b5d9")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Operator-confirmed VEML7700 header: VIN, 3Vo NC, GND, SCL, SDA"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "fc8683e0-0fa9-5cb6-b81b-d3537c6473c6")
			(effects (font (size 1 1)))
		)
		(path "/f6549dd6-b016-5aa2-a883-68e92656613f")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 1.25 11.409999999999997)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "d217617c-7acd-504c-82b0-3337c09ed818"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "5b21d0a2-87f1-5b79-ada0-31a0bad7170b") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 25 "unconnected-(J_VEML-Pin_2-Pad2)") (uuid "c86c516d-8968-5c60-beb3-60b9e0af9da5") )
		(pad "3" thru_hole circle (at 0.000 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "7cd17533-973f-53f6-b5f2-53b31c83f617") )
		(pad "4" thru_hole circle (at 0.000 7.620) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 20 "SCL_EXT") (uuid "eb431a05-757b-5a83-bf62-38f8c02ffbcf") )
		(pad "5" thru_hole circle (at 0.000 10.160) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 21 "SDA_EXT") (uuid "5be895a7-ceaf-5c20-99fa-d213089dc76f") )
	)
	(footprint "room:PinHeader_1x04_P2.54mm"
		(layer "F.Cu")
		(uuid "ea0993b8-c55a-54c0-96e9-1dfb2de70853")
		(at 103.5 91.0)

		(property "Reference" "J_SHT"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "a37c6fa5-0ad1-546d-8cb4-722318868581")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "SHT41 VIN/GND/SCL/SDA"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "b15668ff-f8d7-5c04-a84e-393068292f9b")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Confirmed SHT41 header order: VIN, GND, SCL, SDA"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "5ea8b111-e1da-501f-abfe-c512f8f5eb73")
			(effects (font (size 1 1)))
		)
		(path "/db21a704-173a-5f49-9494-4dc637ca9cf1")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 1.25 8.870000000000005)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "da5f4588-39ff-5cda-bf66-a4c2388bb55f"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "46e2e339-03c4-517a-b300-ba407f272831") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "b5d435c9-365c-5fef-9a43-d472cc508a28") )
		(pad "3" thru_hole circle (at 0.000 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 20 "SCL_EXT") (uuid "4055f4dd-a2f5-5dc8-8970-7271a405bf87") )
		(pad "4" thru_hole circle (at 0.000 7.620) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 21 "SDA_EXT") (uuid "52aa3bf2-734a-5dee-a005-006d7185e21c") )
	)
	(footprint "room:PinHeader_1x03_P2.54mm"
		(layer "F.Cu")
		(uuid "c7021e03-d4a8-5c59-9c97-7d77ba5bb49e")
		(at 176.0 105.0)

		(property "Reference" "J_PIR"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "94b343ba-b65f-5f48-89e2-e9e5f634aac0")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "DSUN_PIR GND/OUT/VCC"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "964634d9-1c30-5d21-8d6d-bc69ec2ebbfa")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Confirmed D-SUN PIR header order: GND, OUT, protected 5V"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "f6ae3ff7-607b-5c28-82b2-7469e33febfc")
			(effects (font (size 1 1)))
		)
		(path "/eed9441c-da9e-5264-92b2-4ef886b312e1")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 1.25 6.329999999999998)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "913df958-3749-574c-97d6-3d13aed22034"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "184341a2-8b37-51b0-990d-960fd231b885") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 19 "PIR_OUT") (uuid "be1660a1-517d-544a-81f4-93f60d0b5d80") )
		(pad "3" thru_hole circle (at 0.000 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 16 "PIR_5V_PROTECTED") (uuid "906bdec9-9fda-5beb-9472-e8a07a35de18") )
	)
	(footprint "room:PinHeader_1x03_P2.54mm"
		(layer "F.Cu")
		(uuid "1c2f0a61-cad5-56e0-90eb-5e2961c474cd")
		(at 176.0 73.0)

		(property "Reference" "J_BEEP"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "b26703d4-ba00-500f-8e69-874c47baf01c")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "KEYES BUZZER S/VCC/-"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "94e2c3b0-2177-5bfc-817c-2720b131ec70")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Confirmed Keyes 3-pin buzzer header: S, VCC, minus"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "0db43744-8997-555e-ad0f-8f73604010bf")
			(effects (font (size 1 1)))
		)
		(path "/bbfe36dc-1c7c-5ab9-ae1f-e319673e7452")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 1.25 6.329999999999998)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "2cbdcf96-1b88-528a-b253-4bf1fd714b9e"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 5 "BEEP_S") (uuid "89a2662a-e6fa-5d0c-bd46-53411a18ab6a") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "117622a1-9b02-5954-8ed9-7fcc67e643ca") )
		(pad "3" thru_hole circle (at 0.000 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "c21c1f1a-e8bf-5de8-941f-62b455894cca") )
	)
	(footprint "room:PinHeader_1x02_P2.54mm"
		(layer "F.Cu")
		(uuid "877e214e-27ae-5a03-bc47-ecb47bb15040")
		(at 109.0 62.5)

		(property "Reference" "J_5V_EXT"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "f08003e9-4a7e-5d2e-a631-b9125c8a1a3f")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "EXT 5V IN / GND"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "26b0f808-3512-5679-bb57-e6af2bc29a7e")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "External 5V input from a current-limited bench supply; GND is common with the board"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "73b493e3-42f9-5373-83bb-3b22409e9e0f")
			(effects (font (size 1 1)))
		)
		(path "/317792dd-eb13-5782-a38a-722ed62005d0")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 1.25 3.7900000000000063)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "a816facb-b3a9-57e3-95b0-4cf0d6e2d604"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 3 "+5V_EXT") (uuid "27fd7478-5a36-58fd-aed7-c192c51a5693") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "630e4c59-29ef-5567-9ede-be1c48a06a50") )
	)
	(footprint "room:PinHeader_1x03_P2.54mm"
		(layer "F.Cu")
		(uuid "abc5df1f-d85a-5be5-a679-0712b72eaec2")
		(at 119.0 62.5)

		(property "Reference" "JP_5V_SRC"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "ed0f080c-50ae-508d-9bac-3724d0ebade3")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "SELECT: 1-2 USB / 2-3 EXT"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "f32f68a9-3d40-538c-bab4-cb9aa60dfd06")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "5V source select. Shunt on 1-2 takes the board VIN, on 2-3 the external supply. Exactly one shunt fits"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "7c501e61-97da-5d45-b086-7ee18813f0c8")
			(effects (font (size 1 1)))
		)
		(path "/b13f6957-4213-54d5-89fa-a8f595e47ed0")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 1.25 6.329999999999998)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "1677e0cf-7925-539f-8743-daebd808efa0"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 4 "+5V_USB_CONFIRMED") (uuid "c209a545-c624-5adf-9f61-26c7e632d53e") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 2 "+5V_DOMAIN") (uuid "96e3854e-3b82-5707-8d4e-55819221577f") )
		(pad "3" thru_hole circle (at 0.000 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 3 "+5V_EXT") (uuid "1b195a63-9b84-58a7-91a6-6c19da4426d2") )
	)
	(footprint "room:Jumper_2_Open_P2.54mm"
		(layer "F.Cu")
		(uuid "bd2dcd66-5bb9-5d21-8bfe-1d6c96469478")
		(at 158.0 108.0)

		(property "Reference" "JP_PIR_5V"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e8da97c1-66b8-5bc5-a32e-c57e72f582e4")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "DEFAULT_OPEN"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "a8d730c2-d619-5177-add2-a5a93ceb51e9")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Default-open PIR 5V enable jumper"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "cd9296d6-eb57-59a2-9c3f-1deb84943d1a")
			(effects (font (size 1 1)))
		)
		(path "/4ef69d07-b267-5bed-8acb-e3d1d8143910")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.789999999999992 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "bdcc4234-36a1-517b-bb44-e1fa3eb4ffff"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 2 "+5V_DOMAIN") (uuid "f0279636-0ef5-5fab-ae2c-e750ddfbc54b") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 17 "PIR_5V_RAW") (uuid "da7f858f-9c77-5e9e-9d07-a17e57c054a4") )
	)
	(footprint "room:D_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "03e2f98c-08c3-5de2-8d9b-ea8826fc2a93")
		(at 165.0 108.0)

		(property "Reference" "D_PIR"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e0624f9b-ba02-5e82-badd-edd160887c02")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "1N5819"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "54edc9dc-cd3f-5a73-af48-e3a93c65dd78")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "1N5819 PIR supply diode; pin 1 K to protected rail, pin 2 A to raw 5V"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "1a6158a2-2883-5762-b489-043bd6677c75")
			(effects (font (size 1 1)))
		)
		(path "/72fb18dd-681c-5d25-b978-30b75ffee936")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "999da777-3461-51e3-969c-9e733e3cb3c4"))
		(fp_text user "K" (at 0 -2.1) (layer "F.SilkS") (uuid "dd1f266a-fddc-5a51-8631-b71ed6c4e989")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_text user "A" (at 7.62 -2.1) (layer "F.SilkS") (uuid "893649d7-230f-51c8-b1e1-8f3b6cf8221c")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_line (start 1.4 -1.25) (end 1.4 1.25) (stroke (width 0.35) (type solid))
			(layer "F.SilkS") (uuid "060eae22-b350-5f0f-8d6d-cdcfa126e1ec"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 16 "PIR_5V_PROTECTED") (uuid "47421fde-4db6-5073-9eda-2ed0379976cc") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 17 "PIR_5V_RAW") (uuid "be3299e4-a7d4-58a8-8a0d-8479d7b4589a") )
	)
	(footprint "room:TO92_CBE"
		(layer "F.Cu")
		(uuid "1ac2efbb-489d-549c-b5c6-68bffc79b6c4")
		(at 160.0 99.0)

		(property "Reference" "Q_PIR"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "be74d605-af98-53c1-89fe-1d79201d0f61")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "2N3904 C/B/E"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "038cb1b5-42e5-5a4b-b40b-a3ec6acc2fb1")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "2N3904 active-low PIR interface; symbol and footprint pins 1/2/3 are C/B/E"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "d7a37406-2cd5-5aaa-9b2d-44d1d4282162")
			(effects (font (size 1 1)))
		)
		(path "/0d69eae8-be7c-5e2b-add6-c31746bf4161")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 6.3300000000000125 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "dc241c7f-150b-5acd-949a-86954f0d0227"))
		(fp_text user "C" (at 0 -2.1) (layer "F.SilkS") (uuid "8296865d-82de-5c23-b12c-1ebb926cb892")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_text user "B" (at 2.54 -2.1) (layer "F.SilkS") (uuid "e18b3a1a-2501-52db-82e7-8c03908b6e9a")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_text user "E" (at 5.08 -2.1) (layer "F.SilkS") (uuid "72dc4441-69a5-540a-aa9e-b13eea45f889")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 12 "GPIO33_PIR_N") (uuid "4455ae7f-35d3-5ac5-aa56-ab28c3c796cf") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 18 "PIR_BASE") (uuid "026cd687-42fc-5629-b61b-827a8112541c") )
		(pad "3" thru_hole circle (at 5.080 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "bc102adc-87f9-5400-9b9a-d447c057c15b") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "6431b91c-4d79-5261-a603-52738f55a9b2")
		(at 170.0 99.0)

		(property "Reference" "R_PIR_IN"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "135b2660-330e-5a5a-bf98-e1a06659cb1f")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "10k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "35323855-a550-52ef-a5cc-10e7e5ad4e28")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "10 kilohm PIR-output-to-NPN-base current limiter"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "5ae35077-0101-51dd-a2c6-0d5e71c4e474")
			(effects (font (size 1 1)))
		)
		(path "/988d33d7-33ad-5466-b108-3e7fd92efcaa")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "c9e06e51-cfb7-54fa-8e90-d39781a253b2"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 19 "PIR_OUT") (uuid "4c0cca7e-5260-5bbb-9009-fb3153c6d44e") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 18 "PIR_BASE") (uuid "60bda57b-0238-5f3d-b679-469c14867c58") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "2e60eb8d-54e2-5518-a171-166e5bf4fe3a")
		(at 160.0 115.0)

		(property "Reference" "R_PIR_PD"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "9cf2ed56-a171-524f-9939-58dcfe977dd7")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "19779a86-f983-5e61-86b3-4ee62672c774")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 kilohm PIR NPN base-emitter pulldown"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "5d7ef8f5-62b2-545f-8ca6-cea42bb74d29")
			(effects (font (size 1 1)))
		)
		(path "/1dc68f68-8482-501e-a176-843241defa66")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "9eda623a-145f-5b1a-b8fd-4514a5bd4f2c"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 18 "PIR_BASE") (uuid "18e32611-5b07-551d-8f7e-ecc4ec0bbd2e") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "414df631-f6af-5e04-8938-aa89055314d8") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "3cd8132a-d514-50fc-a591-da6c87e0eb28")
		(at 154.0 94.0)

		(property "Reference" "R_PIR_PU"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e123bde3-ce5b-53f5-99b4-80a711800d6d")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "10k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "0beb4077-503d-5aa5-ac53-64acdd3e9745")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "10 kilohm GPIO33 pullup to 3V3 for active-low PIR input"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "930d5710-decc-5cfd-a416-62888fb05e4d")
			(effects (font (size 1 1)))
		)
		(path "/8c9b6a8b-3a4c-50b3-862b-d9a1bab0e52c")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "fbaef7fc-8146-58ba-9110-27c77a1ca2ed"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "1dec5556-7bbe-540a-8f31-a60778196cd4") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 12 "GPIO33_PIR_N") (uuid "e0fa5dd2-c05b-5d18-be45-9f10db5d0fed") )
	)
	(footprint "room:C_Radial_P2.00mm"
		(layer "F.Cu")
		(uuid "a164e7d7-48df-5ab6-833f-69844fd15376")
		(at 172.0 113.0)

		(property "Reference" "C5"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "068600d0-38df-52df-ade5-95d7a58b9deb")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100uF"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "2c69f889-8cad-548c-94b8-57b58e86ecdd")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 uF protected PIR 5V bulk capacitor; observe polarity"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "a882dee1-4b9d-5284-9084-eb066cd4d05d")
			(effects (font (size 1 1)))
		)
		(path "/443ba27a-c589-5095-9f6c-5668906c39d3")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.25 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "6d7420c1-ab2f-50dc-be16-f789d2e9e0bf"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 16 "PIR_5V_PROTECTED") (uuid "62a6380a-a693-5971-9857-034399b44ea9") )
		(pad "2" thru_hole circle (at 2.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "a930df87-8958-51ea-b6c5-188431d37384") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "4ef4b49e-6925-5be8-8190-cc2e754fdc4c")
		(at 155.0 80.0)

		(property "Reference" "R_BEEP_S"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "2456d142-68d3-5aa7-b2d9-c300ccb8e47e")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100R"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "e05b5871-8ca9-5a85-93c3-949f13742cfb")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 ohm series protection between GPIO25 and the buzzer S input; see wiring.md if the buzzer stays silent"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "442b2bb2-ae60-5ba8-824a-341d762186c1")
			(effects (font (size 1 1)))
		)
		(path "/02f0b47e-bf0f-53f4-bdba-d93c89c37bab")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "ff98cf61-207c-5adf-b1cb-5c03cdb50b3d"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 11 "GPIO25_BEEP") (uuid "0dbf412d-de56-5b67-9a0c-15d358bd2af9") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 5 "BEEP_S") (uuid "2206c18a-e4cd-5a30-9518-fea327b6f120") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "0057aa46-0b48-54d6-95d9-f8f1d478da27")
		(at 111.0 83.0)

		(property "Reference" "R_SDA"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "bf5d6102-f68c-50a0-a08a-d91c859a0d04")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "330R"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "d722ec03-d7a2-50ab-95ea-bfbc8fbafe87")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "330 ohm external SDA fault-current limiter and edge damper"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "cf1254b8-5b2a-5df1-80d5-964c9c33913c")
			(effects (font (size 1 1)))
		)
		(path "/45c816c1-0844-53eb-a07a-924357b3448d")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "489602c0-6105-5df7-aa01-e74f061b5b3c"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 21 "SDA_EXT") (uuid "274d06f8-2aa6-58b2-851a-47c127af3b61") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 9 "GPIO21_SDA") (uuid "ea53a2c6-8155-53ae-8c5b-6d855427656a") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "c7fda6b5-a832-568b-8d0c-32abd7e345a3")
		(at 111.0 87.0)

		(property "Reference" "R_SCL"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e12dc06e-7720-54b8-8ba1-41b2691d43de")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "330R"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "98c4998c-335d-5321-8af1-c7af277e1037")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "330 ohm external SCL fault-current limiter and edge damper"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "f30bd3e5-cd82-577f-a78f-b14daba12cad")
			(effects (font (size 1 1)))
		)
		(path "/60d29236-1d8b-51ba-af39-54fc98b31f1a")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "eea540c7-07f4-5735-bc72-31e11aea557c"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 20 "SCL_EXT") (uuid "9d2aef8e-127c-5d2e-8f5c-0e3adefae23d") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 10 "GPIO22_SCL") (uuid "4f470349-d9c3-5ff7-9785-5082b5cb3b77") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "c85f8a18-d68e-5e77-b1d8-1aef1a0f26e0")
		(at 104.0 108.0)

		(property "Reference" "R_PU_SDA"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "d6966962-36d8-5c68-9e02-a3b8e78560fc")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "3.3k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "457c4bfb-6802-5618-8309-6ae2f67f5289")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "3.3 kilohm SDA_EXT pullup to 3V3; sized for perfboard wiring capacitance at 100 kHz"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "ff49d945-7d6e-5c16-93f5-361a5127da75")
			(effects (font (size 1 1)))
		)
		(path "/d3c15c8f-7f87-538e-a9ad-3037fd24ddb3")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "812aebb3-a650-5a8f-8b23-caaa47f8ea85"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 21 "SDA_EXT") (uuid "dd6781f5-1dc4-5a25-a693-9525e2f45fd3") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "2237716f-c1a1-58af-9eb2-76f88a1eb9d3") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "0bd85596-c7be-5484-aa37-70055b4a005d")
		(at 115.0 108.0)

		(property "Reference" "R_PU_SCL"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e30d79ed-0463-5b14-aab5-bd368a9432f9")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "3.3k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "f6f214bd-a284-5822-8342-6a368bcd8b17")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "3.3 kilohm SCL_EXT pullup to 3V3; sized for perfboard wiring capacitance at 100 kHz"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "524ffcd3-8439-51df-b349-b9d864c4dff7")
			(effects (font (size 1 1)))
		)
		(path "/c05d233c-3294-5aec-881f-bb70226c6e32")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "6cfd3c29-03df-5b06-bc96-3e860859f17f"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 20 "SCL_EXT") (uuid "b8de85e1-923f-55f7-af7e-048b4a826b00") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "dc9e8ca5-b521-56eb-8aef-34a701e1004b") )
	)
	(footprint "room:C_Disc_P5.00mm"
		(layer "F.Cu")
		(uuid "9bdeca0c-22bc-5992-b951-e8209c19d848")
		(at 108.0 73.0)

		(property "Reference" "C3"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "d6367d0a-a079-5964-910a-2473f12ed78d")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100nF"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "82b375af-db16-5d62-a070-c980b1a80a80")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 nF VEML7700 VIN input decoupling"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "dc47b199-f600-532b-8213-b9517aa78817")
			(effects (font (size 1 1)))
		)
		(path "/e84a1605-71ab-58ef-b64f-4ef8cbdcb5ed")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 6.25 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "0fdad347-f853-58ce-a04a-baefa04344f1"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "27754bee-97d2-58fe-ab5f-5c9f5381df80") )
		(pad "2" thru_hole circle (at 5.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "04865c97-9277-5321-859c-d512e6b35d52") )
	)
	(footprint "room:C_Disc_P5.00mm"
		(layer "F.Cu")
		(uuid "e41486c8-08b6-574b-a78b-5c1af25f72c6")
		(at 108.0 94.0)

		(property "Reference" "C4"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "238bb4df-a14a-531a-809c-46d16244c817")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100nF"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "5de3d53b-f020-5745-9f3d-8665f90bb88f")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 nF SHT41 3V3 local decoupling"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "a71de53c-de44-5ed5-8837-80d6a066a8ab")
			(effects (font (size 1 1)))
		)
		(path "/2818cb4c-ef99-59f8-bcc1-d1ba54a79f1f")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 6.25 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "27ec15fb-e611-5a42-8ba4-5d2b911059a2"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "e80afb50-9035-5ba6-b940-63d7165d20f5") )
		(pad "2" thru_hole circle (at 5.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "fbeb7430-cf75-565c-9ea6-d3773010aec2") )
	)
	(footprint "room:C_Radial_P2.00mm"
		(layer "F.Cu")
		(uuid "d95cb548-7839-583f-adf2-4c4b1924e454")
		(at 143.0 112.0)

		(property "Reference" "C2"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "95a09f21-5b4f-54b2-8567-1f7af40292c3")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100uF"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "74886c66-bfe2-54e3-9008-668ea0cd5521")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 uF controller 3V3 bulk capacitor; observe polarity"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "2cbc7a4c-cbc5-5834-82ea-c09daa7fb00c")
			(effects (font (size 1 1)))
		)
		(path "/13c498a2-ed53-5b48-9ed6-c276d7400163")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.25 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "e7c31a15-6143-59af-afeb-17acae32c1a5"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "95debbb5-a162-50ca-aaf5-ea4901d0ceb2") )
		(pad "2" thru_hole circle (at 2.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "3132e7bf-1579-5fae-b188-eafc84f69776") )
	)
	(footprint "room:C_Disc_P5.00mm"
		(layer "F.Cu")
		(uuid "b11badcb-59c0-5d7d-891c-e057805ac8b9")
		(at 149.0 112.0)

		(property "Reference" "C1"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "c99776f4-8448-5084-abea-57c0bc1d1fe9")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100nF"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "69c7b2fd-5568-52ce-a71e-d9b2aa6aa2ce")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 nF controller 3V3 local decoupling"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "0add5233-1e60-5597-b1c1-4eff2b1fc819")
			(effects (font (size 1 1)))
		)
		(path "/91a14b2a-5279-594f-b094-846a69a2a5e6")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 6.25 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "19d8c0f7-0741-5c11-bc20-5c30b9dfa3ec"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "5da08aad-d963-5da2-a8cc-86e5b4f03ebc") )
		(pad "2" thru_hole circle (at 5.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "262e0ac5-a14f-5328-b1a2-61b7a0a150e3") )
	)
	(footprint "room:PinHeader_1x04_P2.54mm"
		(layer "F.Cu")
		(uuid "6ef4d5c9-ea0d-5743-95c5-1d7965b1898d")
		(at 168.0 84.0)

		(property "Reference" "J_SDS"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e6dcc8df-e413-5caa-ad10-caa1c3dac1f2")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "SDS011 5V/GND/RXD/TXD"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "47c093c5-aaea-50b2-aa7d-c16591562708")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "SDS011 header: protected 5V, GND, sensor RXD, sensor TXD. VERIFY the module connector order"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "e5817d23-6eed-565d-943b-e8620c4fdb83")
			(effects (font (size 1 1)))
		)
		(path "/344ba24d-8ffe-5179-b3c6-a8afb531d416")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 1.25 8.870000000000005)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "537f78e9-9de6-5203-b7e2-a0255bf36037"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 22 "SDS_5V_PROTECTED") (uuid "fba6997a-33db-5ac1-8b81-e53f0433d0a4") )
		(pad "2" thru_hole circle (at 0.000 2.540) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "218b2211-cca9-53f8-978b-24a5b952749d") )
		(pad "3" thru_hole circle (at 0.000 5.080) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 23 "SDS_RXD") (uuid "627ce3d7-3b20-5640-8f78-18c7ff058891") )
		(pad "4" thru_hole circle (at 0.000 7.620) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 24 "SDS_TXD") (uuid "1783b0e4-8960-58a9-8b0d-694e5e3da0bd") )
	)
	(footprint "room:Jumper_2_Open_P2.54mm"
		(layer "F.Cu")
		(uuid "a334061c-9c66-59ab-95f2-ff13ad313949")
		(at 120.0 112.0)

		(property "Reference" "JP_SDS_5V"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "bb6ea093-cfe9-5c82-8c08-85a8bee6bf1d")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "DEFAULT_OPEN"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "e68bf921-cf31-591c-8c98-92a70af8f232")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Default-open SDS011 5V enable jumper; no series diode, see D-026"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "263a79c9-e4de-5ba8-b79f-7545549265d6")
			(effects (font (size 1 1)))
		)
		(path "/a9b5b779-f833-5c06-8ac9-b469df642e39")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.7900000000000063 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "f7f50fd2-03b8-5329-b856-14708c750714"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 2 "+5V_DOMAIN") (uuid "b17ac8ad-34a6-5b45-a956-1b4301abc8a0") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 22 "SDS_5V_PROTECTED") (uuid "30202935-b78e-5f28-921f-b6101419a146") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "7d07ad52-7dc9-5344-9a61-3931739bdd24")
		(at 108.0 100.0)

		(property "Reference" "R_SDS_RX"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "1e44c29c-9f60-5de7-8311-ed29c9426ecb")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "1k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "e221bf04-8754-5f21-b30e-73ec76f85a54")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "1 kilohm between the SDS011 TXD output and GPIO16/RX2; bounds a driver fight to about 3 mA"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "df85bad5-5b6d-5694-ad81-8bd26b1da8d4")
			(effects (font (size 1 1)))
		)
		(path "/e5f62b15-3e89-54e9-9ff1-37bf60f4e286")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "d1c3266d-d12c-5fda-946b-d86947ca1628"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 24 "SDS_TXD") (uuid "8ff74a17-b862-55b3-a2ab-c8d378e9374f") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 7 "GPIO16_SDS_RX") (uuid "95cd51bd-c092-5fac-837b-4ad9c5c74a52") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "5a3e1a71-bdf5-5e0e-be73-34a5b0924989")
		(at 108.0 103.0)

		(property "Reference" "R_SDS_TX"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "e33cd616-0670-55dc-979f-0ab095ce9745")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "1k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "2113343e-b723-562d-ab45-243a9a66bfb4")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "1 kilohm between GPIO17/TX2 and the SDS011 RXD input"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "51a15aa2-4af2-548b-ba43-bff40115d7ad")
			(effects (font (size 1 1)))
		)
		(path "/3427a3a5-9aaf-50d5-8ca0-236f3d3aeaa1")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "b36b85f0-deb3-5b2f-b89d-f290a940aa68"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 8 "GPIO17_SDS_TX") (uuid "5bf5220c-49e0-5bc7-8255-090560a8f87e") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 23 "SDS_RXD") (uuid "c5cc9cc0-9f3f-51f7-90dd-a00809b5348c") )
	)
	(footprint "room:C_Radial_P2.00mm"
		(layer "F.Cu")
		(uuid "0f7e371e-d7b1-5d8b-9e40-01a36933d8d9")
		(at 126.0 112.0)

		(property "Reference" "C6"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "684a63ca-7cc8-5e53-879c-008dad909561")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "470uF"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "c0f37fce-14e6-5184-ad76-b531b0b9c420")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "470 uF protected SDS011 5V bulk; sized for the fan against the 20 mV ripple limit; observe polarity"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "dd3669ba-8804-57d5-acde-f34d25a7aa48")
			(effects (font (size 1 1)))
		)
		(path "/4e3568f0-a64d-5823-906c-f1409095a32f")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.25 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "00d12634-fb5c-58d0-b9fe-4e4b49823c75"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 22 "SDS_5V_PROTECTED") (uuid "f11361e2-a2ae-5514-a96c-8b2bff6ea539") )
		(pad "2" thru_hole circle (at 2.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "77b2b79a-454f-505d-852a-62282a1e5042") )
	)
	(footprint "room:C_Disc_P5.00mm"
		(layer "F.Cu")
		(uuid "77c58306-337f-5f3f-a71d-aea13ca91493")
		(at 131.0 108.0)

		(property "Reference" "C7"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "07e5462d-d34c-55b2-9415-2785345cc173")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "100nF"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "bea95d95-da98-5a80-9b1a-993a3699ac35")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "100 nF SDS011 5V high-frequency decoupling"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "f53a004c-ae00-580e-9930-263f41f0e8df")
			(effects (font (size 1 1)))
		)
		(path "/e220ef3b-d7ef-5b8e-aabf-b753c318310e")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 6.25 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "5062b76b-2d90-5d28-9ec1-0c0057d65e7f"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 22 "SDS_5V_PROTECTED") (uuid "a1b30a21-b123-5ce0-b210-f4a1e51ee272") )
		(pad "2" thru_hole circle (at 5.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "53a2132d-8421-56b2-8672-c54ac773460b") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "e6e1a3e4-fd69-54f1-99cc-da0057625c0f")
		(at 110.0 117.0)

		(property "Reference" "R_LED_3V3"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "1fbf7f85-8393-581b-a90f-a1a9314f8a69")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "470R"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "ba627846-8c47-5baf-9589-17677ac1563b")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "470 ohm for the 3V3 live indicator; about 2.8 mA with a red LED"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "d38916f5-9b79-5f10-ab9f-5badb4d21b6c")
			(effects (font (size 1 1)))
		)
		(path "/a60c1ad6-e9d0-5dca-8eed-fdbaf76fb5f3")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "d1dceeb5-0aca-5a2e-a460-098e0de9c27d"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "85a7f6d1-60ae-57b8-b25b-a1ac20d5ba87") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 13 "LED_3V3_A") (uuid "f4212ba8-cb35-5381-bec6-d59103b8c302") )
	)
	(footprint "room:D_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "cb065a68-ae6d-59a2-9cfe-0e0076620637")
		(at 123.0 117.0)

		(property "Reference" "D_LED_3V3"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "0bc1f526-6f6c-5537-b354-d0db1478fd57")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "LED RED 3V3 LIVE"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "10bb1728-0eb2-5fb4-b1ea-fb633a9f2b53")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "3V3 live indicator; use RED or GREEN, never blue or white at this resistor value"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "d6dde8de-367f-55c3-ad26-8e69a38585b8")
			(effects (font (size 1 1)))
		)
		(path "/19dce44b-b628-50aa-8bb9-072e0a44fe7c")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "0610d67f-ac75-53c0-8bcc-deb4e5649fde"))
		(fp_text user "K" (at 0 -2.1) (layer "F.SilkS") (uuid "fe592bbc-0c73-5c74-b452-bea770b4cf8b")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_text user "A" (at 7.62 -2.1) (layer "F.SilkS") (uuid "b919393b-b27c-5992-8ae4-1f2ec4399643")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_line (start 1.4 -1.25) (end 1.4 1.25) (stroke (width 0.35) (type solid))
			(layer "F.SilkS") (uuid "61a656fa-96d2-5a70-a7f0-71d00cf5d98a"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "238f9447-70c7-5de3-a77f-f48f409db4c9") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 13 "LED_3V3_A") (uuid "f6689edf-ee8d-5adc-8244-8ee8d08b520b") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "f9c01a38-9b3b-5af4-a2d2-af1444773d0f")
		(at 154.0 88.0)

		(property "Reference" "R_LED_SDS"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "35c49357-6a73-5c4e-b589-3f1d732e16d7")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "1k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "256caf63-05ab-5bf2-a667-e746e809848c")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "1 kilohm for the SDS011 5V live indicator; about 3 mA. Draws through JP_SDS_5V"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "f70ef80f-007f-5d32-b830-9d01e3908b3f")
			(effects (font (size 1 1)))
		)
		(path "/c7f4c1c6-742e-53b6-a5de-48e3b3cf2c93")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "e9ad40a8-5d8b-525f-991a-1ea33c7c50c1"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 22 "SDS_5V_PROTECTED") (uuid "a4112237-e95b-550b-81aa-7f37e88e6404") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 15 "LED_SDS_A") (uuid "2e111b7a-dda6-5c08-b61c-936f70ab6faa") )
	)
	(footprint "room:D_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "81232182-7822-5137-b3fb-1e73fff0ce65")
		(at 154.0 92.0)

		(property "Reference" "D_LED_SDS"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "c6c89ee4-be24-5fe1-8074-be2cd02d6d3b")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "LED SDS 5V LIVE"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "34cf245d-de59-509f-abe8-e97efbded617")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "SDS011 5V domain live indicator; lit means the default-open jumper is closed"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "5344c306-cfa8-5740-91c2-428c1956aabc")
			(effects (font (size 1 1)))
		)
		(path "/16392ac5-362b-5d9d-ae45-e018873583c4")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "8d049277-14ce-581f-8c47-81350bb58d46"))
		(fp_text user "K" (at 0 -2.1) (layer "F.SilkS") (uuid "163f78ee-d4ef-5833-a953-17418b8e72e5")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_text user "A" (at 7.62 -2.1) (layer "F.SilkS") (uuid "e3d233c2-2c8f-5b33-b299-74e53129f406")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_line (start 1.4 -1.25) (end 1.4 1.25) (stroke (width 0.35) (type solid))
			(layer "F.SilkS") (uuid "e82a9681-775b-5a83-9ccc-efde5268a43e"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "4c924be9-adfa-587e-b3eb-b75f1d7e996f") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 15 "LED_SDS_A") (uuid "93349b4c-695f-539f-ba20-607e7b7a08f0") )
	)
	(footprint "room:R_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "bce06352-512b-5c0c-8b2a-2e51410bf2b2")
		(at 152.0 118.0)

		(property "Reference" "R_LED_PIR"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "da926809-5cd8-59ba-b6b4-4c80ff7d0aed")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "1k"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "f364387b-fdd4-52e3-b3bf-ccb20adb99dd")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "1 kilohm for the PIR 5V live indicator; about 3 mA. Draws through JP_PIR_5V"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "fead28ad-4b06-5881-a15d-61c79a90d698")
			(effects (font (size 1 1)))
		)
		(path "/d7d759cc-a983-5f41-9e77-ad01fd693047")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "2c5c6afa-fbd5-550d-937d-6c921d12359e"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 16 "PIR_5V_PROTECTED") (uuid "783e75c7-8cc1-53f0-afb0-b40837e6ce23") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 14 "LED_PIR_A") (uuid "57507b93-6895-59ca-81bb-ca60701c08db") )
	)
	(footprint "room:D_Axial_P7.62mm"
		(layer "F.Cu")
		(uuid "568c4713-56c1-5c70-b413-76f4779847c7")
		(at 162.0 118.0)

		(property "Reference" "D_LED_PIR"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "aca1450a-c68d-53ac-a780-36a55459b840")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "LED PIR 5V LIVE"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "f617ba83-47bf-5d2d-8805-9d8ed6441425")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "PIR 5V domain live indicator; lit means the default-open jumper is closed"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "dd6ff2f3-1cf7-59b5-93fe-42cda9f3ccd6")
			(effects (font (size 1 1)))
		)
		(path "/b4f9b13f-40ba-5332-a69b-519e4cfe6bbc")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 8.870000000000005 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "6cf691ce-542e-5562-9fb4-f6b28473be08"))
		(fp_text user "K" (at 0 -2.1) (layer "F.SilkS") (uuid "59f88d82-6f6c-5ef6-baed-892242a911e7")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_text user "A" (at 7.62 -2.1) (layer "F.SilkS") (uuid "89e53e10-c125-50fc-865b-c0fb1b3da94c")
			(effects (font (size 0.8 0.8) (thickness 0.14))) )
		(fp_line (start 1.4 -1.25) (end 1.4 1.25) (stroke (width 0.35) (type solid))
			(layer "F.SilkS") (uuid "c9ea1f26-550c-5565-bf3b-86b9a0df6afa"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "385e1795-dfc8-5888-a8d2-bcaf1bee417d") )
		(pad "2" thru_hole circle (at 7.620 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 14 "LED_PIR_A") (uuid "75ae5c82-cd83-5076-a83a-77660980e01f") )
	)
	(footprint "room:TestPoint_2Pin_THT"
		(layer "F.Cu")
		(uuid "f7abc72c-7ff3-50ff-b579-36e6cf459f63")
		(at 134.0 116.0)

		(property "Reference" "TP_3V3"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "6fad1a1b-ce25-533a-ad61-fd31146be953")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "3V3/GND"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "ad5c6aeb-0ba5-59cb-b597-21b0133294ed")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "3V3 and GND paired through-hole measurement points"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "2e06a95c-1c04-57e0-ac52-fb026bdf4694")
			(effects (font (size 1 1)))
		)
		(path "/d80d2cd1-2094-5df2-89c1-770033cbbc37")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.789999999999992 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "a682ece5-7b28-5f2d-a3ab-07fe701b36c2"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 1 "+3V3") (uuid "1e25a796-290f-539f-860a-205fd056a29b") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "7fc38e64-bb4e-5e1a-8fae-814592b294d1") )
	)
	(footprint "room:TestPoint_2Pin_THT"
		(layer "F.Cu")
		(uuid "88c8e263-bcdd-589f-8fa3-4bf18a8a65a5")
		(at 141.0 116.0)

		(property "Reference" "TP_5V"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "684c1f06-0485-5ca2-978d-e0fd285166c4")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "5V/GND"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "38fd0481-d7d5-5185-a6a6-1e36f69bce0b")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Selected 5V domain and GND paired measurement points; reads whichever source JP_5V_SRC selects"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "86739625-3e91-53d2-bac8-1d5d5f2bde8b")
			(effects (font (size 1 1)))
		)
		(path "/731a51d1-7333-5232-b3b1-b085c2ed35fe")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.789999999999992 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "a0cf84e1-004d-5b44-a847-7b149b496b0d"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 2 "+5V_DOMAIN") (uuid "ea6be83e-fec5-5071-b717-3cb5df15183c") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "c2410566-98a6-5862-87bc-24f133706fe5") )
	)
	(footprint "room:TestPoint_2Pin_THT"
		(layer "F.Cu")
		(uuid "61ddf0e6-90db-551a-b243-02e0a2994803")
		(at 148.0 116.0)

		(property "Reference" "TP_GND"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "0bc04f29-4bca-52a9-a943-3f303535ffb9")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "GND/GND"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "c5fc90f6-b882-5831-b9d4-22589992c67a")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "Paired GND through-hole continuity points"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "36220181-f780-58f5-be2f-bbf8d1d85596")
			(effects (font (size 1 1)))
		)
		(path "/3dba3bb3-4e34-5d1a-8441-64db579fbcaa")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.789999999999992 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "3823cdb5-2f00-5e48-bf92-05de7272c743"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "4bc6697e-2ebc-5495-958a-ed5852b2f747") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "031f3b54-e52b-5bc5-8120-4d1a8b731766") )
	)
	(footprint "room:TestPoint_2Pin_THT"
		(layer "F.Cu")
		(uuid "7350cbd3-e6e2-5690-b3de-1d854c37e2f9")
		(at 103.5 83.0)

		(property "Reference" "TP_SDA"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "6771781e-5710-5688-9a0b-d13bc7579cba")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "SDA/GND"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "fa06d6ff-5ccd-592f-bdff-e7c37180d04e")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "External SDA and GND paired through-hole measurement points"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "131e09c9-a34f-5183-b136-1b59289ebe51")
			(effects (font (size 1 1)))
		)
		(path "/dc3276df-d173-57dd-8e75-f2ec3a34cc53")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.7900000000000063 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "958e15eb-d658-57f9-a659-1ec7f05d23ff"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 21 "SDA_EXT") (uuid "2e925a72-23c5-5b80-be91-d979e83ab700") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "18222e94-8e05-56c7-ab8a-829e5c7e9eef") )
	)
	(footprint "room:TestPoint_2Pin_THT"
		(layer "F.Cu")
		(uuid "2427fb09-5d08-5aa7-b669-c1bb17a9a8ff")
		(at 118.0 93.0)

		(property "Reference" "TP_SCL"
			(at 0 -2 0)
			(layer "F.Fab") (hide yes)
			(uuid "0820824b-2dba-57de-b00b-e343cdce2327")
			(effects (font (size 0.9 0.9) (thickness 0.15)))
		)
		(property "Value" "SCL/GND"
			(at 0 2 0)
			(layer "F.Fab")
			(uuid "744768cc-a4c3-512e-aa79-ff0198ebf51f")
			(effects (font (size 0.8 0.8) (thickness 0.12)))
		)
		(property "Description" "External SCL and GND paired through-hole measurement points"
			(at 0 0 0) (layer "F.Fab") (hide yes)
			(uuid "193577ce-da3b-5e4d-bfab-f0eb4c056cdf")
			(effects (font (size 1 1)))
		)
		(path "/c008853d-6a4a-5086-9898-68e210004f1b")
		(sheetname "/")
		(sheetfile "atmosmesh-room.kicad_sch")
		(attr through_hole)
		(fp_rect (start -1.25 -1.25) (end 3.7900000000000063 1.25)
			(stroke (width 0.15) (type solid)) (fill no) (layer "F.Fab") (uuid "1b77151f-974e-5bea-a5d1-5e83861cd950"))
		(pad "1" thru_hole rect (at 0.000 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 20 "SCL_EXT") (uuid "71d8e4fa-4cf9-5efd-a942-9a97fe363cd7") )
		(pad "2" thru_hole circle (at 2.540 0.000) (size 1.7 1.7) (drill 0.8)
			(layers "*.Cu" "*.Mask") (net 6 "GND") (uuid "b5694707-d499-5ba1-b6dc-80b0c2f02df8") )
	)
	(footprint "room:MountingHole_3.2mm_M3" (layer "F.Cu") (uuid "10102cae-c7cd-519d-9e18-b4de2fd03841") (at 104 64)
		(property "Reference" "H1" (at 0 -4 0) (layer "F.Fab") (hide yes) (uuid "a7e4c631-ee35-5555-99c8-25409c201885") (effects (font (size 1 1))))
		(property "Value" "M3" (at 0 4 0) (layer "F.Fab") (uuid "72cfff10-b2f4-5cdd-aaa9-256d546f8db3") (effects (font (size 1 1))))
		(attr board_only through_hole exclude_from_pos_files exclude_from_bom)
		(fp_circle (center 0 0) (end 4 0) (stroke (width 0.25) (type solid)) (fill no) (layer "F.Fab") (uuid "8d3ec13f-7e3a-58fa-8792-e4404554ff30") )
		(pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers "*.Cu" "*.Mask") (uuid "78b0c9a2-feb9-57fb-abc8-e4ddada238b9") )
	)
	(footprint "room:MountingHole_3.2mm_M3" (layer "F.Cu") (uuid "3d35d2fb-3bd0-55c7-8597-2264fc3e750d") (at 176 64)
		(property "Reference" "H2" (at 0 -4 0) (layer "F.Fab") (hide yes) (uuid "d38f0d0a-6014-5428-8dd9-14724919a6fa") (effects (font (size 1 1))))
		(property "Value" "M3" (at 0 4 0) (layer "F.Fab") (uuid "b2748f74-1424-5fb9-a9d0-dba9841befd5") (effects (font (size 1 1))))
		(attr board_only through_hole exclude_from_pos_files exclude_from_bom)
		(fp_circle (center 0 0) (end 4 0) (stroke (width 0.25) (type solid)) (fill no) (layer "F.Fab") (uuid "7d668d54-41a5-59ca-b22b-eb7bec3f6dbd") )
		(pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers "*.Cu" "*.Mask") (uuid "256d816d-2b36-58cb-950f-b361f2f7053b") )
	)
	(footprint "room:MountingHole_3.2mm_M3" (layer "F.Cu") (uuid "2412fd4f-7e29-5ee8-b2d0-817480442524") (at 104 116)
		(property "Reference" "H3" (at 0 -4 0) (layer "F.Fab") (hide yes) (uuid "212b907d-926c-510d-8401-453080cde5ef") (effects (font (size 1 1))))
		(property "Value" "M3" (at 0 4 0) (layer "F.Fab") (uuid "a963c682-9965-5257-acef-8effcaf6ef61") (effects (font (size 1 1))))
		(attr board_only through_hole exclude_from_pos_files exclude_from_bom)
		(fp_circle (center 0 0) (end 4 0) (stroke (width 0.25) (type solid)) (fill no) (layer "F.Fab") (uuid "ab788b6c-366b-5d04-bb82-5f0e5d24a261") )
		(pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers "*.Cu" "*.Mask") (uuid "a498ef19-9973-511a-95eb-3b8737c40635") )
	)
	(footprint "room:MountingHole_3.2mm_M3" (layer "F.Cu") (uuid "11f3f7db-73ab-5782-9553-282171477b6d") (at 176 116)
		(property "Reference" "H4" (at 0 -4 0) (layer "F.Fab") (hide yes) (uuid "873968d7-e9e4-59e6-be1e-b828a9ad47ed") (effects (font (size 1 1))))
		(property "Value" "M3" (at 0 4 0) (layer "F.Fab") (uuid "ef37effe-f253-5bdc-aeba-b9393c1bba3e") (effects (font (size 1 1))))
		(attr board_only through_hole exclude_from_pos_files exclude_from_bom)
		(fp_circle (center 0 0) (end 4 0) (stroke (width 0.25) (type solid)) (fill no) (layer "F.Fab") (uuid "51908b9d-0ae8-52d8-9fb9-3be61d63d7ba") )
		(pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 3.2) (layers "*.Cu" "*.Mask") (uuid "8fdddda1-c290-559b-8c83-526c5f391906") )
	)
	(gr_text "IDEASPARK 1.14in TFT - VERIFY ROW SPACING" (at 142 61.5) (layer "F.SilkS") (uuid "316ce5b9-91a2-5677-8cb1-9a17debdae77")
		(effects (font (size 1.2 1.2) (thickness 0.16)) (justify)) )
	(gr_text "VERIFY 30-PIN / 25.4mm ROWS" (at 142 63.5) (layer "F.SilkS") (uuid "4b64cbf2-4b77-5046-b629-2cc5665b0bb5")
		(effects (font (size 1.0 1.0) (thickness 0.16)) (justify)) )
	(gr_text "PARKED - PERFBOARD BUILD - DO NOT ORDER" (at 142 65.5) (layer "F.SilkS") (uuid "c58a0b19-69f9-5535-9741-1c9ca685df27")
		(effects (font (size 1.0 1.0) (thickness 0.16)) (justify)) )
	(gr_text "NO COPPER / PARTS - ANTENNA" (at 136.5 66) (layer "Dwgs.User") (uuid "73f451d0-e703-5536-a7da-762d3b858b51")
		(effects (font (size 0.9 0.9) (thickness 0.16)) (justify)) )
	(gr_text "NEVER WIRE: 2 4 15 18 23 32 TFT / 12 STRAP / 1 3 UART" (at 140 107) (layer "Dwgs.User") (uuid "251f0b8d-ea2a-5aec-a9fa-cff54a87965b")
		(effects (font (size 0.8 0.8) (thickness 0.16)) (justify)) )
	(gr_text "5V DOMAIN" (at 169 102) (layer "Dwgs.User") (uuid "36e3d5c8-9f8f-5425-91ca-0dbe415a2c4d")
		(effects (font (size 1.0 1.0) (thickness 0.16)) (justify)) )
	(gr_text "5V SRC 1-2 USB 2-3 EXT" (at 113 71.5) (layer "Dwgs.User") (uuid "73dc9a1b-066e-5d7c-b87a-0405d258fa9f")
		(effects (font (size 0.8 0.8) (thickness 0.16)) (justify)) )
	(gr_text "LED LIT = THAT 5V DOMAIN IS LIVE" (at 140 110) (layer "Dwgs.User") (uuid "a0e4eade-7338-5c12-8812-177ad9d25056")
		(effects (font (size 0.8 0.8) (thickness 0.16)) (justify)) )
	(gr_text "SDS011 5V - NO DIODE - UART CROSSED" (at 120 118) (layer "Dwgs.User") (uuid "ec85393c-e980-532b-b24e-8f2f0d4d6aac")
		(effects (font (size 0.8 0.8) (thickness 0.16)) (justify)) )
	(gr_text "BUZZER S/VCC/-" (at 166 65) (layer "Dwgs.User") (uuid "fbdb157d-2a31-5551-bcf5-84a8f0b34fa7")
		(effects (font (size 0.8 0.8) (thickness 0.16)) (justify)) )
	(gr_text "SHT41 - KEEP FROM HEAT" (at 112 89) (layer "Dwgs.User") (uuid "51b040fc-b5b0-502b-992e-8fc38a2a7638")
		(effects (font (size 0.8 0.8) (thickness 0.16)) (justify)) )
	(gr_text "SHIELD FROM LCD" (at 109 67.5) (layer "Dwgs.User") (uuid "e82db40c-1591-59d4-bbde-96b03c4932f6")
		(effects (font (size 0.8 0.8) (thickness 0.16)) (justify)) )
	(gr_rect (start 119 60.5) (end 155 67) (stroke (width 0.3) (type dash)) (fill none)
		(layer "Dwgs.User") (uuid "883ed64c-f3a4-54bf-82ee-4d2389e3aefe") )
	(gr_line (start 100 60) (end 180 60) (stroke (width 0.2) (type solid))
		(layer "Edge.Cuts") (uuid "e550f61f-4610-5383-9a13-8d2e4ef72df4") )
	(gr_line (start 180 60) (end 180 120) (stroke (width 0.2) (type solid))
		(layer "Edge.Cuts") (uuid "22e193ef-75f0-5cb4-817d-2325779090b5") )
	(gr_line (start 180 120) (end 100 120) (stroke (width 0.2) (type solid))
		(layer "Edge.Cuts") (uuid "bee6a9b5-3ded-5080-8fc0-d59d2e6b3f79") )
	(gr_line (start 100 120) (end 100 60) (stroke (width 0.2) (type solid))
		(layer "Edge.Cuts") (uuid "cccd537f-d992-553b-8c4e-fe8c93a49c59") )
)