*nvim-tree-lua.txt*       A File Explorer For Nvim        *nvim_tree*  *nvim-tree*

Author: Yazdani Kiyan
                                       Type |gO| to see the table of contents.
Help tag prefixes:
• `nvim-tree-`  Help Sections e.g.
  • |nvim-tree-mappings|
  • |nvim-tree-config|
• `nvim_tree.`  API and classes e.g.
  • |nvim_tree.api.node.navigate.parent()|
  • |nvim_tree.config.filesystem_watchers|

==============================================================================
Introduction                                          *nvim-tree-introduction*

Features

    - Automatic updates
    - File type icons
    - Git integration
    - Diagnostics integration: LSP and COC
    - (Live) filtering
    - Cut, copy, paste, rename, delete, create
    - Highly customisable

File Icons

    https://github.com/nvim-tree/nvim-web-devicons is optional and used to display file icons.
    It requires a patched font: https://www.nerdfonts.com
    Your terminal emulator must be configured to use that font, usually "Hack Nerd Font"

     should look like an open folder.

    Disable the display of icons with |nvim_tree.config.renderer.icons.show|

Colours

    Syntax highlighting uses g:terminal_color_ from colorschemes, falls back to
    ugly colors otherwise.

Git Integration

    One or two icons for git status. When two are shown, the left is staged.

      ✗  unstaged
      ✓  staged
        unmerged
      ➜  renamed
      ★  untracked
        deleted
      ◌  ignored

Requirements

    Nvim >= 0.9

==============================================================================
Quickstart                                              *nvim-tree-quickstart*

Install the plugins via your package manager:
  `"nvim-tree/nvim-tree.lua"`
  `"nvim-tree/nvim-web-devicons"`

Disabling |netrw| is strongly advised, see |nvim-tree-netrw|

==============================================================================
Quickstart: Setup                                 *nvim-tree-quickstart-setup*

Setup the plugin in your `init.lua`.

See |nvim-tree-setup| and |nvim-tree-config-default| >lua

  -- disable netrw at the very start of your init.lua
  vim.g.loaded_netrw = 1
  vim.g.loaded_netrwPlugin = 1

  -- optionally enable 24-bit colour
  vim.opt.termguicolors = true

  -- empty setup using defaults
  require("nvim-tree").setup()

  -- OR setup with a config

  ---@type nvim_tree.config
  local config = {
    sort = {
      sorter = "case_sensitive",
    },
    view = {
      width = 30,
    },
    renderer = {
      group_empty = true,
    },
    filters = {
      dotfiles = true,
    },
  }
  require("nvim-tree").setup(config)
<
==============================================================================
Quickstart: Help                                   *nvim-tree-quickstart-help*

Open the tree:  `:NvimTreeOpen`

Show the mappings:  `g?`

`<C-]>`           CD                         |nvim_tree.api.tree.change_root_to_node()|
`<C-e>`           Open: In Place             |nvim_tree.api.node.open.replace_tree_buffer()|
`<C-k>`           Info                       |nvim_tree.api.node.show_info_popup()|
`<C-r>`           Rename: Omit Filename      |nvim_tree.api.fs.rename_sub()|
`<C-t>`           Open: New Tab              |nvim_tree.api.node.open.tab()|
`<C-v>`           Open: Vertical Split       |nvim_tree.api.node.open.vertical()|
`<C-x>`           Open: Horizontal Split     |nvim_tree.api.node.open.horizontal()|
`<BS>`            Close Directory            |nvim_tree.api.node.navigate.parent_close()|
`<CR>`            Open                       |nvim_tree.api.node.open.edit()|
`<Del>`           Delete                     |nvim_tree.api.fs.remove()|
`<Tab>`           Open Preview               |nvim_tree.api.node.open.preview()|
`>`               Next Sibling               |nvim_tree.api.node.navigate.sibling.next()|
`<`               Previous Sibling           |nvim_tree.api.node.navigate.sibling.prev()|
`.`               Run Command                |nvim_tree.api.node.run.cmd()|
`-`               Up                         |nvim_tree.api.tree.change_root_to_parent()|
`a`               Create File Or Directory   |nvim_tree.api.fs.create()|
`bd`              Delete Bookmarked          |nvim_tree.api.marks.bulk.delete()|
`bt`              Trash Bookmarked           |nvim_tree.api.marks.bulk.trash()|
`bmv`             Move Bookmarked            |nvim_tree.api.marks.bulk.move()|
`B`               Toggle Filter: No Buffer   |nvim_tree.api.filter.no_buffer.toggle()|
`c`               Copy                       |nvim_tree.api.fs.copy.node()|
`C`               Toggle Filter: Git Clean   |nvim_tree.api.filter.git.clean.toggle()|
`[c`              Prev Git                   |nvim_tree.api.node.navigate.git.prev()|
`]c`              Next Git                   |nvim_tree.api.node.navigate.git.next()|
`d`               Delete                     |nvim_tree.api.fs.remove()|
`D`               Trash                      |nvim_tree.api.fs.trash()|
`E`               Expand All                 |nvim_tree.api.tree.expand_all()|
`e`               Rename: Basename           |nvim_tree.api.fs.rename_basename()|
`]e`              Next Diagnostic            |nvim_tree.api.node.navigate.diagnostics.next()|
`[e`              Prev Diagnostic            |nvim_tree.api.node.navigate.diagnostics.prev()|
`F`               Live Filter: Clear         |nvim_tree.api.filter.live.clear()|
`f`               Live Filter: Start         |nvim_tree.api.filter.live.start()|
`g?`              Help                       |nvim_tree.api.tree.toggle_help()|
`gy`              Copy Absolute Path         |nvim_tree.api.fs.copy.absolute_path()|
`ge`              Copy Basename              |nvim_tree.api.fs.copy.basename()|
`H`               Toggle Filter: Dotfiles    |nvim_tree.api.filter.dotfiles.toggle()|
`I`               Toggle Filter: Git Ignored |nvim_tree.api.filter.git.ignored.toggle()|
`J`               Last Sibling               |nvim_tree.api.node.navigate.sibling.last()|
`K`               First Sibling              |nvim_tree.api.node.navigate.sibling.first()|
`L`               Toggle Group Empty         |nvim_tree.api.node.open.toggle_group_empty()|
`M`               Toggle Filter: No Bookmark |nvim_tree.api.filter.no_bookmark.toggle()|
`m`               Toggle Bookmark            |nvim_tree.api.marks.toggle()|
`o`               Open                       |nvim_tree.api.node.open.edit()|
`O`               Open: No Window Picker     |nvim_tree.api.node.open.no_window_picker()|
`p`               Paste                      |nvim_tree.api.fs.paste()|
`P`               Parent Directory           |nvim_tree.api.node.navigate.parent()|
`q`               Close                      |nvim_tree.api.tree.close()|
`r`               Rename                     |nvim_tree.api.fs.rename()|
`R`               Refresh                    |nvim_tree.api.tree.reload()|
`s`               Run System                 |nvim_tree.api.node.run.system()|
`S`               Search                     |nvim_tree.api.tree.search_node()|
`u`               Rename: Full Path          |nvim_tree.api.fs.rename_full()|
`U`               Toggle Filter: Custom      |nvim_tree.api.filter.custom.toggle()|
`W`               Collapse All               |nvim_tree.api.tree.collapse_all()|
`x`               Cut                        |nvim_tree.api.fs.cut()|
`y`               Copy Name                  |nvim_tree.api.fs.copy.filename()|
`Y`               Copy Relative Path         |nvim_tree.api.fs.copy.relative_path()|
`<2-LeftMouse>`   Open                       |nvim_tree.api.node.open.edit()|
`<2-RightMouse>`  CD                         |nvim_tree.api.tree.change_root_to_node()|

==============================================================================
Quickstart: Custom Mappings             *nvim-tree-quickstart-custom-mappings*

|nvim-tree-mappings-default| are applied by default however you may customise
via |nvim_tree.config| {on_attach} e.g. >lua

  local function my_on_attach(bufnr)
    local api = require "nvim-tree.api"

    local function opts(desc)
      return { desc = "nvim-tree: " .. desc, buffer = bufnr, noremap = true, silent = true, nowait = true }
    end

    -- default mappings
    api.map.on_attach.default(bufnr)

    -- custom mappings
    vim.keymap.set("n", "<C-t>", api.tree.change_root_to_parent,        opts("Up"))
    vim.keymap.set("n", "?",     api.tree.toggle_help,                  opts("Help"))
  end

  -- pass to setup along with your other config
  require("nvim-tree").setup({
    ---
    on_attach = my_on_attach,
    ---
  })
<
==============================================================================
Quickstart: Highlight Groups                  *nvim-tree-quickstart-highlight*

Run |:NvimTreeHiTest| to show all the highlights that nvim-tree uses.

They can be customised before or after setup is called and will be immediately
applied at runtime. e.g. >lua

  vim.cmd([[
      :hi      NvimTreeExecFile    guifg=#ffa0a0
      :hi      NvimTreeSpecialFile guifg=#ff80ff gui=underline
      :hi      NvimTreeSymlink     guifg=Yellow  gui=italic
      :hi link NvimTreeImageFile   Title
  ]])
<
See |nvim-tree-highlight-groups| for details.

==============================================================================
Commands                                                  *nvim-tree-commands*

Some commands may be executed with a |<bang>| `!` or take a `path` string argument.

All commands execute public API.

*:NvimTreeOpen*                            |nvim_tree.api.tree.open()| >lua

  require("nvim-tree.api").tree.open({
    path = "<args>"
  })
<
*:NvimTreeClose*                           |nvim_tree.api.tree.close()| >lua

  require("nvim-tree.api").tree.close()
<
*:NvimTreeToggle*                          |nvim_tree.api.tree.toggle()| >lua

  require("nvim-tree.api").tree.toggle({
    path = "<args>",
    find_file = false,
    update_root = false,
    focus = true,
  })
<
*:NvimTreeFocus*                           |nvim_tree.api.tree.open()| >lua

  require("nvim-tree.api").tree.open()
<
*:NvimTreeRefresh*                         |nvim_tree.api.tree.reload()| >lua

  require("nvim-tree.api").tree.reload()
<
*:NvimTreeFindFile*                        |nvim_tree.api.tree.find_file()| >lua

  require("nvim-tree.api").tree.find_file({
    open = true,
    update_root = "<bang>",
    focus = true,
  })
<
*:NvimTreeFindFileToggle*                  |nvim_tree.api.tree.toggle()| >lua

  require("nvim-tree.api").tree.toggle({
    path = "<args>",
    find_file = true,
    update_root = "<bang>",
    focus = true,
  })
<
*:NvimTreeClipboard*                       |nvim_tree.api.fs.print_clipboard()| >lua

  require("nvim-tree.api").fs.print_clipboard()
<
*:NvimTreeCollapse*                        |nvim_tree.api.tree.collapse_all()| >lua

  require("nvim-tree.api").tree.collapse_all({
    keep_buffers = false
  })
<
*:NvimTreeCollapseKeepBuffers*             |nvim_tree.api.tree.collapse_all()| >lua

  require("nvim-tree.api").tree.collapse_all({
    keep_buffers = true
  })
<
*:NvimTreeHiTest*                         |nvim_tree.api.appearance.hi_test()| >lua

  require("nvim-tree.api").appearance.hi_test()
<
*:NvimTreeResize*                          |nvim_tree.api.tree.resize()| >lua

  local sign = c.args:sub(1, 1)
  if sign == "+" or sign == "-" then
    require("nvim-tree.api").tree.resize({ relative = tonumber(c.args) })
  else
    require("nvim-tree.api").tree.resize({ absolute = tonumber(c.args) })
  end
<

==============================================================================
Setup                                                        *nvim-tree-setup*

You must run the `setup()` function once to initialise nvim-tree. It may be
called again to apply a change in configuration without restarting Nvim.

The `setup()` function takes one optional argument: |nvim_tree.config|. If
omitted nvim-tree will be initialised with default configuration:
|nvim-tree-config-default|.

Config can be validated with |lsp| when passed directly e.g. >lua

  require("nvim-tree").setup({
    hijack_cursor = true,
  })
<
or as a typed variable e.g. >lua

  ---@type nvim_tree.config
  local config = {
    hijack_cursor = true,
  }
  require("nvim-tree").setup(config)
<
The first `setup()` call is cheap: it does nothing more than validate / apply
the configuration. Nothing happens until the tree is first opened.

Subsequent `setup()` calls are expensive as they tear down the world before
applying configuration.

==============================================================================
Mappings                                                  *nvim-tree-mappings*

Mappings are set via the |nvim_tree.config| {on_attach} function, which is run upon
creating the nvim-tree buffer. Mappings are usually |nvim-tree-api| functions
however may be your own.

When {on_attach} is not a function, |nvim-tree-mappings-default| will be used.

Active mappings may be viewed via HELP, default `g?`. The mapping's description
is used when displaying HELP.

The `on_attach` function is passed the `bufnr` of nvim-tree. Use
|vim.keymap.set()| or |nvim_set_keymap()| to define mappings as usual. e.g. >lua

  local function my_on_attach(bufnr)
    local api = require("nvim-tree.api")

    local function opts(desc)
      return { desc = "nvim-tree: " .. desc, buffer = bufnr, noremap = true, silent = true, nowait = true }
    end

    -- copy default mappings here from defaults in next section
    vim.keymap.set("n", "<C-]>", api.tree.change_root_to_node,          opts("CD"))
    vim.keymap.set("n", "<C-e>", api.node.open.replace_tree_buffer,     opts("Open: In Place"))
    ---
    -- OR use all default mappings
    api.map.on_attach.default(bufnr)

    -- remove a default
    vim.keymap.del("n", "<C-]>", { buffer = bufnr })

    -- override a default
    vim.keymap.set("n", "<C-e>", api.tree.reload,                       opts("Refresh"))

    -- add your mappings
    vim.keymap.set("n", "?",     api.tree.toggle_help,                  opts("Help"))
    ---
  end

  require("nvim-tree").setup({
    ---
    on_attach = my_on_attach,
    ---
  })
<
Single left mouse mappings can be achieved via `<LeftRelease>`.

Single right / middle mouse mappings will require changes to |'mousemodel'| or |'mouse'|.

|vim.keymap.set()| {rhs} is a `(function|string)` thus it may be necessary to
define your own function to map complex functionality e.g. >lua

  local function print_node_path()
    local api = require("nvim-tree.api")
    local node = api.tree.get_node_under_cursor()
    print(node.absolute_path)
  end

  -- on_attach
  vim.keymap.set("n", "<C-P>", print_node_path, opts("Print Path"))
<
==============================================================================
Mappings: Default                                 *nvim-tree-mappings-default*

In the absence of an |nvim_tree.config| {on_attach} function, the following
defaults will be applied.

You are encouraged to copy these to your {on_attach} function. >lua

  local api = require("nvim-tree.api")

  local function opts(desc)
    return { desc = "nvim-tree: " .. desc, buffer = bufnr, noremap = true, silent = true, nowait = true }
  end

  -- BEGIN_ON_ATTACH_DEFAULT
  vim.keymap.set("n", "<C-]>",          api.tree.change_root_to_node,       opts("CD"))
  vim.keymap.set("n", "<C-e>",          api.node.open.replace_tree_buffer,  opts("Open: In Place"))
  vim.keymap.set("n", "<C-k>",          api.node.show_info_popup,           opts("Info"))
  vim.keymap.set("n", "<C-r>",          api.fs.rename_sub,                  opts("Rename: Omit Filename"))
  vim.keymap.set("n", "<C-t>",          api.node.open.tab,                  opts("Open: New Tab"))
  vim.keymap.set("n", "<C-v>",          api.node.open.vertical,             opts("Open: Vertical Split"))
  vim.keymap.set("n", "<C-x>",          api.node.open.horizontal,           opts("Open: Horizontal Split"))
  vim.keymap.set("n", "<BS>",           api.node.navigate.parent_close,     opts("Close Directory"))
  vim.keymap.set("n", "<CR>",           api.node.open.edit,                 opts("Open"))
  vim.keymap.set("n", "<Del>",          api.fs.remove,                      opts("Delete"))
  vim.keymap.set("n", "<Tab>",          api.node.open.preview,              opts("Open Preview"))
  vim.keymap.set("n", ">",              api.node.navigate.sibling.next,     opts("Next Sibling"))
  vim.keymap.set("n", "<",              api.node.navigate.sibling.prev,     opts("Previous Sibling"))
  vim.keymap.set("n", ".",              api.node.run.cmd,                   opts("Run Command"))
  vim.keymap.set("n", "-",              api.tree.change_root_to_parent,     opts("Up"))
  vim.keymap.set("n", "a",              api.fs.create,                      opts("Create File Or Directory"))
  vim.keymap.set("n", "bd",             api.marks.bulk.delete,              opts("Delete Bookmarked"))
  vim.keymap.set("n", "bt",             api.marks.bulk.trash,               opts("Trash Bookmarked"))
  vim.keymap.set("n", "bmv",            api.marks.bulk.move,                opts("Move Bookmarked"))
  vim.keymap.set("n", "B",              api.filter.no_buffer.toggle,        opts("Toggle Filter: No Buffer"))
  vim.keymap.set("n", "c",              api.fs.copy.node,                   opts("Copy"))
  vim.keymap.set("n", "C",              api.filter.git.clean.toggle,        opts("Toggle Filter: Git Clean"))
  vim.keymap.set("n", "[c",             api.node.navigate.git.prev,         opts("Prev Git"))
  vim.keymap.set("n", "]c",             api.node.navigate.git.next,         opts("Next Git"))
  vim.keymap.set("n", "d",              api.fs.remove,                      opts("Delete"))
  vim.keymap.set("n", "D",              api.fs.trash,                       opts("Trash"))
  vim.keymap.set("n", "E",              api.tree.expand_all,                opts("Expand All"))
  vim.keymap.set("n", "e",              api.fs.rename_basename,             opts("Rename: Basename"))
  vim.keymap.set("n", "]e",             api.node.navigate.diagnostics.next, opts("Next Diagnostic"))
  vim.keymap.set("n", "[e",             api.node.navigate.diagnostics.prev, opts("Prev Diagnostic"))
  vim.keymap.set("n", "F",              api.filter.live.clear,              opts("Live Filter: Clear"))
  vim.keymap.set("n", "f",              api.filter.live.start,              opts("Live Filter: Start"))
  vim.keymap.set("n", "g?",             api.tree.toggle_help,               opts("Help"))
  vim.keymap.set("n", "gy",             api.fs.copy.absolute_path,          opts("Copy Absolute Path"))
  vim.keymap.set("n", "ge",             api.fs.copy.basename,               opts("Copy Basename"))
  vim.keymap.set("n", "H",              api.filter.dotfiles.toggle,         opts("Toggle Filter: Dotfiles"))
  vim.keymap.set("n", "I",              api.filter.git.ignored.toggle,      opts("Toggle Filter: Git Ignored"))
  vim.keymap.set("n", "J",              api.node.navigate.sibling.last,     opts("Last Sibling"))
  vim.keymap.set("n", "K",              api.node.navigate.sibling.first,    opts("First Sibling"))
  vim.keymap.set("n", "L",              api.node.open.toggle_group_empty,   opts("Toggle Group Empty"))
  vim.keymap.set("n", "M",              api.filter.no_bookmark.toggle,      opts("Toggle Filter: No Bookmark"))
  vim.keymap.set("n", "m",              api.marks.toggle,                   opts("Toggle Bookmark"))
  vim.keymap.set("n", "o",              api.node.open.edit,                 opts("Open"))
  vim.keymap.set("n", "O",              api.node.open.no_window_picker,     opts("Open: No Window Picker"))
  vim.keymap.set("n", "p",              api.fs.paste,                       opts("Paste"))
  vim.keymap.set("n", "P",              api.node.navigate.parent,           opts("Parent Directory"))
  vim.keymap.set("n", "q",              api.tree.close,                     opts("Close"))
  vim.keymap.set("n", "r",              api.fs.rename,                      opts("Rename"))
  vim.keymap.set("n", "R",              api.tree.reload,                    opts("Refresh"))
  vim.keymap.set("n", "s",              api.node.run.system,                opts("Run System"))
  vim.keymap.set("n", "S",              api.tree.search_node,               opts("Search"))
  vim.keymap.set("n", "u",              api.fs.rename_full,                 opts("Rename: Full Path"))
  vim.keymap.set("n", "U",              api.filter.custom.toggle,           opts("Toggle Filter: Custom"))
  vim.keymap.set("n", "W",              api.tree.collapse_all,              opts("Collapse All"))
  vim.keymap.set("n", "x",              api.fs.cut,                         opts("Cut"))
  vim.keymap.set("n", "y",              api.fs.copy.filename,               opts("Copy Name"))
  vim.keymap.set("n", "Y",              api.fs.copy.relative_path,          opts("Copy Relative Path"))
  vim.keymap.set("n", "<2-LeftMouse>",  api.node.open.edit,                 opts("Open"))
  vim.keymap.set("n", "<2-RightMouse>", api.tree.change_root_to_node,       opts("CD"))
  -- END_ON_ATTACH_DEFAULT
<
Alternatively, you may apply these default mappings from your
|nvim_tree.config| {on_attach} via |nvim_tree.api.map.on_attach.default()| e.g. >lua

  local function my_on_attach(bufnr)
    local api = require("nvim-tree.api")

    local function opts(desc)
      return { desc = "nvim-tree: " .. desc, buffer = bufnr, noremap = true, silent = true, nowait = true }
    end

    api.map.on_attach.default(bufnr)

    -- your removals and mappings go here
  end
<

==============================================================================
Icons And Highlighting                          *nvim-tree-icons-highlighting*

Icons may be displayed before files and directories.

Additional icons and highlighting may be displayed to indicate various states
for files and and directories. Highlighting is additive.

Decorators are responsible for providing the icons and highlighting. They
apply additively in order of precedence.

`DECORATOR`
  See |nvim_tree.config.renderer.decorator| for available decorators and their
  default precedence.

`ICON?`
  Enable via |nvim_tree.config.renderer.icons.show

`REQUIRES`
  Features that must be enabled to show icons and highlighting.

`PLACEMENT`
  Where to place icons: |nvim_tree.config.renderer.icons.placement|

`HIGHLIGHT`
  What should be highlighted: |nvim_tree.config.renderer.highlight|

`DEVICONS?`
  Glyphs and their colors will be overridden by optional plugin:
  `nvim-tree/nvim-web-devicons`
  See |nvim_tree.config.renderer.icons.web_devicons|

`GLYPHS`
  Icon glyphs definitions.

`GROUPS`
  Applicable highlight groups: |nvim-tree-highlight-groups|

Some defaults noted. In ascending order of default decorator additive
precedence:

`WHAT          DECORATOR     ICON?            REQUIRES                      PLACEMENT                             HIGHLIGHT                        GLYPHS                                              DEVICONS?  GROUPS`
File Icon      -            {file}       Y    -                             -                                     -                               |nvim_tree.config.renderer.icons.glyphs| {default}    Y          `NvimTreeNormal`, `NvimTreeFileIcon`
Folder Icon    -            {folder}     Y    -                             -                                     -                               |nvim_tree.config.renderer.icons.glyphs.folder|       Y          `NvimTree*FolderName`, `NvimTree*FolderIcon`
Git Status    `"Git"`         {git}        Y   |nvim_tree.config.git|          {git_placement}        `"before"`       {highlight_git}         `"none"`   |nvim_tree.config.renderer.icons.glyphs.git|          N          `NvimTreeGit*`
|bufloaded()|   `"Open"`         -                -                             -                                    {highlight_opened_files}`"none"`    -                                                  N         ` NvimTreeOpened*`
Dotfiles      `"Hidden"`      {hidden}     N    -                            {hidden_placement}     `"after"`        {highlight_hidden}      `"none"`   |nvim_tree.config.renderer.icons.glyphs| {hidden}     N          `NvimTreeHidden*`
|'modified'|    `"Modified"`    {modified}   Y   |nvim_tree.config.modified|     {modified_placement}   `"after"`        {highlight_modified}    `"none"`   |nvim_tree.config.renderer.icons.glyphs| {modified}   N          `NvimTreeModified*`
Bookmarked    `"Bookmark"`    {bookmarks}  Y    -                            {bookmarks_placement}  `"signcolumn"`   {highlight_bookmarks}   `"none"`   |nvim_tree.config.renderer.icons.glyphs| {bookmark}   N          `NvimTreeBookmark*`
Diag Status  ` "Diagnostics"` {diagnostics}Y   |nvim_tree.config.diagnostics|  {diagnostics_placement}`"signcolumn"`   {highlight_diagnostics} `"none" `  |nvim_tree.config.diagnostics.icons|                  N          `NvimTreeDiagnostic*`
Copied        `"Copied"`       -                -                             -                                    {highlight_clipboard}   `"name"`    -                                                  N          `NvimTreeCopiedHL`
Cut           `"Cut"`          -                -                             -                                    {highlight_clipboard}   `"name"`    -                                                  N          `NvimTreeCutHL`


==============================================================================
Highlight Groups                                  *nvim-tree-highlight-groups*

All the following highlight groups can be configured by hand. Aside from
`NvimTreeWindowPicker`, it is not advised to colorize the background of these
groups.

Example |:highlight| >vim
    :hi NvimTreeSymlink guifg=blue gui=bold,underline
<
It is recommended to enable |'termguicolors'| for the more pleasant 24-bit
colours.

To view the nvim-tree highlight groups run |:NvimTreeHiTest|

To view all active highlight groups run `:so $VIMRUNTIME/syntax/hitest.vim`
as per |:highlight|

The `*HL` groups are additive, following |nvim_tree.config.renderer.decorator|
precedence.
Only present attributes will clobber each other.
In this example a modified, opened file will have magenta text, with cyan
undercurl: >vim
    :hi NvimTreeOpenedHL       guifg=magenta guisp=red  gui=underline
    :hi NvimTreeModifiedFileHL               guisp=cyan gui=undercurl
<
To prevent usage of a highlight:

- Before setup: link the group to `Normal` e.g. >vim
    :hi NvimTreeExecFile Normal
<
- After setup: link it to `NONE`, to override the default link e.g. >lua
    :hi! link NvimTreeExecFile NONE
<
==============================================================================
Highlight Groups: Default                 *nvim-tree-highlight-groups-default*

|:highlight-link| `default` or |:highlight-default| define the groups on setup:

Standard: >
    NvimTreeNormal              Normal
    NvimTreeNormalFloat         NormalFloat
    NvimTreeNormalNC            NormalFloat

    NvimTreeLineNr              LineNr
    NvimTreeWinSeparator        WinSeparator
    NvimTreeEndOfBuffer         EndOfBuffer
    NvimTreePopup               Normal
    NvimTreeSignColumn          NvimTreeNormal

    NvimTreeCursorColumn        CursorColumn
    NvimTreeCursorLine          CursorLine
    NvimTreeCursorLineNr        CursorLineNr

    NvimTreeStatusLine          StatusLine
    NvimTreeStatusLineNC        StatusLineNC
<
File Text: >
    NvimTreeExecFile            SpellCap
    NvimTreeImageFile           SpellCap
    NvimTreeSpecialFile         SpellCap
    NvimTreeSymlink             SpellCap
<
Folder Text: >
    NvimTreeRootFolder          Title
    NvimTreeFolderName          Directory
    NvimTreeEmptyFolderName     Directory
    NvimTreeOpenedFolderName    Directory
    NvimTreeSymlinkFolderName   Directory
<
File Icons: >
    NvimTreeFileIcon            NvimTreeNormal
    NvimTreeSymlinkIcon         NvimTreeNormal
<
Folder Icons: >
    NvimTreeFolderIcon          guifg=#8094b4 ctermfg=Blue
    NvimTreeOpenedFolderIcon    NvimTreeFolderIcon
    NvimTreeClosedFolderIcon    NvimTreeFolderIcon
    NvimTreeFolderArrowClosed   NvimTreeIndentMarker
    NvimTreeFolderArrowOpen     NvimTreeIndentMarker
<
Indent: >
    NvimTreeIndentMarker        NvimTreeFileIcon
<
Picker: >
    NvimTreeWindowPicker        guifg=#ededed guibg=#4493c8 gui=bold ctermfg=White ctermbg=Cyan
<
Live Filter: >
    NvimTreeLiveFilterPrefix    PreProc
    NvimTreeLiveFilterValue     ModeMsg
<
Clipboard: >
    NvimTreeCopiedHL            SpellRare
    NvimTreeCutHL               SpellBad
<
Bookmarks: >
    NvimTreeBookmarkIcon        NvimTreeFolderIcon
    NvimTreeBookmarkHL          SpellLocal
<
Modified: >
    NvimTreeModifiedIcon        Type
    NvimTreeModifiedFileHL      NvimTreeModifiedIcon
    NvimTreeModifiedFolderHL    NvimTreeModifiedIcon

Hidden: >
    NvimTreeModifiedIcon        Conceal
    NvimTreeModifiedFileHL      NvimTreeHiddenIcon
    NvimTreeModifiedFolderHL    NvimTreeHiddenFileHL
<
Hidden Display: >
    NvimTreeHiddenDisplay       Conceal
<
Opened: >
    NvimTreeOpenedHL            Special
<
Git Icon: >
    NvimTreeGitDeletedIcon      Statement
    NvimTreeGitDirtyIcon        Statement
    NvimTreeGitIgnoredIcon      Comment
    NvimTreeGitMergeIcon        Constant
    NvimTreeGitNewIcon          PreProc
    NvimTreeGitRenamedIcon      PreProc
    NvimTreeGitStagedIcon       Constant
<
Git File File Highlight: >
    NvimTreeGitFileDeletedHL    NvimTreeGitDeletedIcon
    NvimTreeGitFileDirtyHL      NvimTreeGitDirtyIcon
    NvimTreeGitFileIgnoredHL    NvimTreeGitIgnoredIcon
    NvimTreeGitFileMergeHL      NvimTreeGitMergeIcon
    NvimTreeGitFileNewHL        NvimTreeGitNewIcon
    NvimTreeGitFileRenamedHL    NvimTreeGitRenamedIcon
    NvimTreeGitFileStagedHL     NvimTreeGitStagedIcon
<
Git Folder Folder Highlight: >
    NvimTreeGitFolderDeletedHL  NvimTreeGitFileDeletedHL
    NvimTreeGitFolderDirtyHL    NvimTreeGitFileDirtyHL
    NvimTreeGitFolderIgnoredHL  NvimTreeGitFileIgnoredHL
    NvimTreeGitFolderMergeHL    NvimTreeGitFileMergeHL
    NvimTreeGitFolderNewHL      NvimTreeGitFileNewHL
    NvimTreeGitFolderRenamedHL  NvimTreeGitFileRenamedHL
    NvimTreeGitFolderStagedHL   NvimTreeGitFileStagedHL
<
Diagnostics Icon: >
    NvimTreeDiagnosticErrorIcon         DiagnosticError
    NvimTreeDiagnosticWarnIcon          DiagnosticWarn
    NvimTreeDiagnosticInfoIcon          DiagnosticInfo
    NvimTreeDiagnosticHintIcon          DiagnosticHint
<
Diagnostics File Highlight: >
    NvimTreeDiagnosticErrorFileHL       DiagnosticUnderlineError
    NvimTreeDiagnosticWarnFileHL        DiagnosticUnderlineWarn
    NvimTreeDiagnosticInfoFileHL        DiagnosticUnderlineInfo
    NvimTreeDiagnosticHintFileHL        DiagnosticUnderlineHint
<
Diagnostics Folder Highlight: >
    NvimTreeDiagnosticErrorFolderHL     NvimTreeDiagnosticErrorFileHL
    NvimTreeDiagnosticWarnFolderHL      NvimTreeDiagnosticWarnFileHL
    NvimTreeDiagnosticInfoFolderHL      NvimTreeDiagnosticInfoFileHL
    NvimTreeDiagnosticHintFolderHL      NvimTreeDiagnosticHintFileHL
<
==============================================================================
Events                                                      *nvim-tree-events*

nvim-tree will dispatch events whenever an action is made. These events can be
subscribed to through handler functions. This allows for even further
customization of nvim-tree.

A handler for an event is just a function which receives one argument, the
payload of the event. The payload is different for each event type. Refer
to |nvim_tree_registering_handlers| for more information.

*nvim_tree_registering_handlers*

Handlers are registered by calling |nvim_tree.api.events.subscribe()| function
with an |nvim_tree_events_kind|.

e.g. handler for node renamed: >lua

    local api = require("nvim-tree.api")
    local Event = api.events.Event

    api.events.subscribe(Event.NodeRenamed, function(data)
      print("Node renamed from " .. data.old_name .. " to " ..  data.new_name)
    end)
<
*nvim_tree_events_kind*

- Event.Ready
                When NvimTree has been initialized.
                • Note: Handler takes no parameter.

- Event.TreePreOpen
                Invoked before the window and buffer for NvimTree are created
                or opened. Before `Event.TreeOpen`
                • Note: Handler takes no parameter.

- Event.TreeOpen
                Invoked after the NvimTree is opened.
                • Note: Handler takes no parameter.

- Event.TreeClose
                Invoked after the NvimTree is closed, but before the window is
                closed. Dispatched on |WinClosed| event for NvimTree window.
                • Note: Handler takes no parameter.

- Event.Resize - When NvimTree is resized.
                handler parameters: ~
                    size:        `number` size of the view in columns.

- Event.WillRenameNode
                • Note: A node can either be a file or a directory.
                handler parameters: ~
                  {old_name}     `{string}` Absolute path to the old node location.
                  {new_name}     `{string}` Absolute path to the new node location.

- Event.NodeRenamed
                • Note: A node can either be a file or a directory.
                handler parameters: ~
                  {old_name}     `{string}` Absolute path to the old node location.
                  {new_name}     `{string}` Absolute path to the new node location.

- Event.FileCreated
                handler parameters: ~
                  {fname}        `{string}` Absolute path to the created file

- Event.WillCreateFile
                handler parameters: ~
                  {fname}        `{string}` Absolute path to the file to be
                  created

- Event.FileRemoved
                handler parameters: ~
                  {fname}        `{string}` Absolute path to the removed file.

- Event.WillRemoveFile
                handler parameters: ~
                  {fname}        `{string}` Absolute path to the file to be
                  removed

- Event.FolderCreated
                handler parameters: ~
                  {folder_name}  `{string}` Absolute path to the created folder.

- Event.FolderRemoved
                handler parameters: ~
                  {folder_name}  `{string}` Absolute path to the removed folder.

- Event.TreeAttachedPost
                Invoked after the tree's buffer has been created and mappings
                have been applied: |nvim-tree-mappings| or |nvim_tree.config| {on_attach}
                handler parameters: ~
                  {buf}          `{number} `API buffer handle (buffer number)

- Event.TreeRendered
                Invoked every time the tree is redrawn. Normally this event
                happens after `Event.TreeOpen` except that handlers of this
                one will have access to the tree buffer populated with the
                final content.
                handler parameters: ~
                  {bufnr}          `{number} `API buffer handle (buffer number)
                  {winnr}          `{number} `API window handle (window number)

*nvim_tree_events_startup*

There are two special startup events in the form of User autocommands:

`NvimTreeRequired`      first `require("nvim-tree")`
`NvimTreeSetup`         `setup({})` completed

Immediately before firing: a global variable of the same name will be set to a
value of 1.

Example subscription: >lua

  vim.api.nvim_create_autocmd("User", {
    pattern = "NvimTreeRequired",
    callback = function(data)
      ---
    end,
  })
<
==============================================================================
Prompts                                                    *nvim-tree-prompts*

Some NvimTree actions use the builtin |vim.ui.select()| prompt API for
confirmations when the |nvim_tree.config| {select_prompts} option is set.

The API accepts the optional `kind` key as part of the {opts} parameter, which
can can be used to identify the type of prompt, to allow user side
configurations for different types of prompts.

- `nvimtree_overwrite_rename`
    overwrite or rename during |nvim_tree.api.fs.paste()|

- `nvimtree_remove`
    delete during |nvim_tree.api.fs.remove()|

- `nvimtree_trash`
    send to trash during |nvim_tree.api.fs.trash()|

- `nvimtree_bulk_delete`
    delete all bookmarked during |nvim_tree.api.marks.bulk.delete()|

- `nvimtree_bulk_trash`
    send all bookmarked to trash during |nvim_tree.api.marks.bulk.trash()|

==============================================================================
OS Specific Restrictions                               *nvim-tree-os-specific*

Windows WSL and PowerShell
- Trash is synchronized
- Executable file detection is disabled as this is non-performant and can
  freeze Nvim
- Some filesystem watcher error related to permissions will not be reported

Powershell
- Observed Nvim hanging after a runaway (infinite) number of events on a
  single directory. See |nvim_tree.config.filesystem_watchers| {max_events}

==============================================================================
netrw                                                        *nvim-tree-netrw*

|netrw| is a standard Nvim plugin that is enabled by default. It provides,
amongst other functionality, a file/directory browser.

It interferes with nvim-tree and the intended user experience is nvim-tree
replacing the |netrw| browser.

It is strongly recommended to disable |netrw|. As it is a bundled plugin it
must be disabled manually at the start of your `init.lua` as per |netrw-noload|: >lua

  vim.g.loaded_netrw       = 1
  vim.g.loaded_netrwPlugin = 1
<
There are many |netrw| features beyond the file browser. If you want to
keep using |netrw| without its browser features please ensure:

|nvim_tree.config| {disable_netrw}` = false`
|nvim_tree.config| {hijack_netrw}`  = true`

==============================================================================
Legacy                                                      *nvim-tree-legacy*

Backwards compatible, silent refactors have been done.

==============================================================================
Legacy: Config                                       *nvim-tree-legacy-config*

Legacy config is translated to the current, making type and value changes as
needed.

`update_cwd`                         |nvim_tree.config| {sync_root_with_cwd}
`update_focused_file.update_cwd`     |nvim_tree.config.update_focused_file| {update_root}
`open_on_tab`                        |nvim_tree.config.tab.sync| {open}
`ignore_buf_on_tab_change`           |nvim_tree.config.tab.sync| {ignore}
`renderer.root_folder_modifier`      |nvim_tree.config.renderer| {root_folder_label}
`update_focused_file.debounce_delay` |nvim_tree.config.view| {debounce_delay}
`trash.require_confirm`              |nvim_tree.config.ui.confirm| {trash}
`view.adaptive_size`                 |nvim_tree.config.view| {width}
`sort_by`                            |nvim_tree.config.sort| {sorter}
`git.ignore`                         |nvim_tree.config.filters| {git_ignored}
`renderer.icons.webdev_colors`       |nvim_tree.config.renderer.icons.web_devicons.file| {color}
`renderer.icons.padding`             |nvim_tree.config.renderer.icons.padding| {icon}

==============================================================================
Legacy: API                                             *nvim-tree-legacy-api*

Deprecated API with unchanged function signature:

`api.config.mappings.get_keymap`         |nvim_tree.api.map.keymap.current()|
`api.config.mappings.get_keymap_default` |nvim_tree.api.map.keymap.default()|
`api.config.mappings.default_on_attach`  |nvim_tree.api.map.on_attach.default()|

`api.diagnostics.hi_test`                |nvim_tree.api.appearance.hi_test()|

`api.live_filter.start`                  |nvim_tree.api.filter.live.start()|
`api.live_filter.clear`                  |nvim_tree.api.filter.live.clear()|

`api.tree.toggle_enable_filters`         |nvim_tree.api.filter.toggle()|
`api.tree.toggle_gitignore_filter`       |nvim_tree.api.filter.git.ignored.toggle()|
`api.tree.toggle_git_clean_filter`       |nvim_tree.api.filter.git.clean.toggle()|
`api.tree.toggle_no_buffer_filter`       |nvim_tree.api.filter.no_buffer.toggle()|
`api.tree.toggle_custom_filter`          |nvim_tree.api.filter.custom.toggle()|
`api.tree.toggle_hidden_filter`          |nvim_tree.api.filter.dotfiles.toggle()|
`api.tree.toggle_no_bookmark_filter`     |nvim_tree.api.filter.no_bookmark.toggle()|

==============================================================================
Legacy: Highlight                                 *nvim-tree-legacy-highlight*

Legacy highlight group are still obeyed when they are defined and the current
highlight group is not, hard linking as follows: >

    NvimTreeModifiedIcon        NvimTreeModifiedFile
    NvimTreeOpenedHL            NvimTreeOpenedFile
    NvimTreeBookmarkIcon        NvimTreeBookmark

    NvimTreeGitDeletedIcon      NvimTreeGitDeleted
    NvimTreeGitDirtyIcon        NvimTreeGitDirty
    NvimTreeGitIgnoredIcon      NvimTreeGitIgnored
    NvimTreeGitMergeIcon        NvimTreeGitMerge
    NvimTreeGitNewIcon          NvimTreeGitNew
    NvimTreeGitRenamedIcon      NvimTreeGitRenamed
    NvimTreeGitStagedIcon       NvimTreeGitStaged

    NvimTreeGitFileDeletedHL    NvimTreeFileDeleted
    NvimTreeGitFileDirtyHL      NvimTreeFileDirty
    NvimTreeGitFileIgnoredHL    NvimTreeFileIgnored
    NvimTreeGitFileMergeHL      NvimTreeFileMerge
    NvimTreeGitFileNewHL        NvimTreeFileNew
    NvimTreeGitFileRenamedHL    NvimTreeFileRenamed
    NvimTreeGitFileStagedHL     NvimTreeFileStaged

    NvimTreeGitFolderDeletedHL  NvimTreeFolderDeleted
    NvimTreeGitFolderDirtyHL    NvimTreeFolderDirty
    NvimTreeGitFolderIgnoredHL  NvimTreeFolderIgnored
    NvimTreeGitFolderMergeHL    NvimTreeFolderMerge
    NvimTreeGitFolderNewHL      NvimTreeFolderNew
    NvimTreeGitFolderRenamedHL  NvimTreeFolderRenamed
    NvimTreeGitFolderStagedHL   NvimTreeFolderStaged

    NvimTreeLspDiagnosticsError                 NvimTreeDiagnosticErrorIcon
    NvimTreeLspDiagnosticsWarning               NvimTreeDiagnosticWarnIcon
    NvimTreeLspDiagnosticsInformation           NvimTreeDiagnosticInfoIcon
    NvimTreeLspDiagnosticsHint                  NvimTreeDiagnosticHintIcon

    NvimTreeLspDiagnosticsErrorText             NvimTreeDiagnosticErrorFileHL
    NvimTreeLspDiagnosticsWarningText           NvimTreeDiagnosticWarnFileHL
    NvimTreeLspDiagnosticsInformationText       NvimTreeDiagnosticInfoFileHL
    NvimTreeLspDiagnosticsHintText              NvimTreeDiagnosticHintFileHL

    NvimTreeLspDiagnosticsErrorFolderText       NvimTreeDiagnosticErrorFolderHL
    NvimTreeLspDiagnosticsWarningFolderText     NvimTreeDiagnosticWarnFolderHL
    NvimTreeLspDiagnosticsInformationFolderText NvimTreeDiagnosticInfoFolderHL
    NvimTreeLspDiagnosticsHintFolderText        NvimTreeDiagnosticHintFolderHL
<


==============================================================================
Config                                                      *nvim-tree-config*

*nvim_tree.config*
    Arguments to pass to |nvim-tree-setup|.

    When a value is not present/nil, the default will be used.

    {on_attach} Runs when creating the nvim-tree buffer. Use this to set your
    |nvim-tree-mappings|. When not a function, |nvim-tree-mappings-default|
    will be used.

    {hijack_cursor} keep the cursor on the first letter of the filename when
    moving in the tree.

    {auto_reload_on_write} reload the explorer every time a buffer is written
    to.

    {disable_netrw} completely disables |netrw|, see |nvim-tree-netrw| for
    details. It is strongly advised to eagerly disable netrw, due to race
    conditions at vim startup.

    {hijack_netrw} hijacks netrw windows, ignored when {disable_netrw}.

    {hijack_unnamed_buffer_when_opening} opens in place of the unnamed buffer
    if it's empty.

    {root_dirs} preferred root directories, requires
    |nvim_tree.config.update_focused_file.update_root|.

    {prefer_startup_root} prefer startup root directory when updating root
    directory of the tree. Requires
    |nvim_tree.config.update_focused_file.update_root|.

    {sync_root_with_cwd} changes the tree root directory on |DirChanged| and
    refreshes the tree.

    {reload_on_bufenter} automatically reloads the tree on |BufEnter|
    nvim-tree.

    {respect_buf_cwd} changes the |current-directory| of nvim-tree to that of
    new buffer's when opening nvim-tree.

    {select_prompts} uses |vim.ui.select()| style prompts. Necessary when
    using a UI prompt decorator such as dressing.nvim or
    telescope-ui-select.nvim

    Fields: ~
      • {on_attach}?                           (`"default"|(fun(bufnr: integer))`)
                                               (default: `default`)
      • {hijack_cursor}?                       (`boolean`) (default: `false`)
      • {auto_reload_on_write}?                (`boolean`) (default: `true`)
      • {disable_netrw}?                       (`boolean`) (default: `false`)
      • {hijack_netrw}?                        (`boolean`) (default: `true`)
      • {hijack_unnamed_buffer_when_opening}?  (`boolean`) (default: `false`)
      • {root_dirs}?                           (`string[]`) (default: `{}`)
      • {prefer_startup_root}?                 (`boolean`) (default: `false`)
      • {sync_root_with_cwd}?                  (`boolean`) (default: `false`)
      • {reload_on_bufenter}?                  (`boolean`) (default: `false`)
      • {respect_buf_cwd}?                     (`boolean`) (default: `false`)
      • {select_prompts}?                      (`boolean`) (default: `false`)
      • {sort}?                                (`nvim_tree.config.sort`)
                                               |nvim_tree.config.sort|
      • {view}?                                (`nvim_tree.config.view`)
                                               |nvim_tree.config.view|
      • {renderer}?                            (`nvim_tree.config.renderer`)
                                               |nvim_tree.config.renderer|
      • {hijack_directories}?                  (`nvim_tree.config.hijack_directories`)
                                               |nvim_tree.config.hijack_directories|
      • {update_focused_file}?                 (`nvim_tree.config.update_focused_file`)
                                               |nvim_tree.config.update_focused_file|
      • {system_open}?                         (`nvim_tree.config.system_open`)
                                               |nvim_tree.config.system_open|
      • {git}?                                 (`nvim_tree.config.git`)
                                               |nvim_tree.config.git|
      • {diagnostics}?                         (`nvim_tree.config.diagnostics`)
                                               |nvim_tree.config.diagnostics|
      • {modified}?                            (`nvim_tree.config.modified`)
                                               |nvim_tree.config.modified|
      • {filters}?                             (`nvim_tree.config.filters`)
                                               |nvim_tree.config.filters|
      • {live_filter}?                         (`nvim_tree.config.live_filter`)
                                               |nvim_tree.config.live_filter|
      • {filesystem_watchers}?                 (`nvim_tree.config.filesystem_watchers`)
                                               |nvim_tree.config.filesystem_watchers|
      • {actions}?                             (`nvim_tree.config.actions`)
                                               |nvim_tree.config.actions|
      • {trash}?                               (`nvim_tree.config.trash`)
                                               |nvim_tree.config.trash|
      • {tab}?                                 (`nvim_tree.config.tab`)
                                               |nvim_tree.config.tab|
      • {bookmarks}?                           (`nvim_tree.config.bookmarks`)
                                               |nvim_tree.config.bookmarks|
      • {notify}?                              (`nvim_tree.config.notify`)
                                               |nvim_tree.config.notify|
      • {help}?                                (`nvim_tree.config.help`)
                                               |nvim_tree.config.help|
      • {ui}?                                  (`nvim_tree.config.ui`)
                                               |nvim_tree.config.ui|
      • {experimental}?                        (`nvim_tree.config.experimental`)
                                               |nvim_tree.config.experimental|
      • {log}?                                 (`nvim_tree.config.log`)
                                               |nvim_tree.config.log|



==============================================================================
Config: sort                                           *nvim-tree-config-sort*

*nvim_tree.config.sort*
    Sort files within a directory.

    {sorter} presets                            *nvim_tree.config.sort.Sorter*
    • `"name"`
    • `"case_sensitive"` name
    • `"modification_time"`
    • `"extension"` uses all suffixes e.g. `foo.tar.gz` -> `.tar.gz`
    • `"suffix"` uses the last e.g. `foo.tar.gz` -> `.gz`
    • `"filetype"` |filetype|

    {sorter} may be a function that is passed a list of `nvim_tree.api.Node`
    to be sorted in place e.g. >lua

        ---Sort by name length
        ---@param nodes nvim_tree.api.Node[]
        ---@return nvim_tree.config.sort.Sorter?
        local sorter = function(nodes)
          table.sort(nodes, function(a, b)
            return #a.name < #b.name
          end)
        end
<

    {sorter} may be a function that returns a |nvim_tree.config.sort.Sorter|

    Fields: ~
      • {sorter}?         (`nvim_tree.config.sort.Sorter|(fun(nodes: nvim_tree.api.Node[]): nvim_tree.config.sort.Sorter?)`)
                          (default: `"name"`)
      • {folders_first}?  (`boolean`, default: `true`) Sort folders before
                          files. Has no effect when {sorter} is a function.
      • {files_first}?    (`boolean`, default: `false`) Sort files before
                          folders. Has no effect when {sorter} is a function.
                          Overrides {folders_first}.



==============================================================================
Config: view                                           *nvim-tree-config-view*

*nvim_tree.config.view*
    Configures the dimensions and appearance of the nvim-tree window.

    The window is "docked" at the left by default, however may be configured
    to float: |nvim_tree.config.view.float|

    {width} can be a |nvim_tree.config.view.width.spec| for static control or
    a |nvim_tree.config.view.width| for fully dynamic control based on longest
    line.

                                            *nvim_tree.config.view.width.spec*
    • `string`: `x%` string e.g. `30%`
    • `integer`: number of columns
    • `function`: returns one of the above

    Fields: ~
      • {centralize_selection}?         (`boolean`, default: `false`) When
                                        entering nvim-tree, reposition the
                                        view so that the current node is
                                        initially centralized, see |zz|.
      • {cursorline}?                   (`boolean`, default: `true`)
                                        |'cursorline'|
      • {cursorlineopt}?                (`string`, default: `both`)
                                        |'cursorlineopt'|
      • {debounce_delay}?               (`integer`, default: `15`) Idle
                                        milliseconds before some reload /
                                        refresh operations. Increase if you
                                        experience performance issues around
                                        screen refresh.
      • {side}?                         (`"left"|"right"`) (default: `"left"`)
      • {preserve_window_proportions}?  (`boolean`, default: `false`)
                                        Preserves window proportions when
                                        opening a file. If `false`, the height
                                        and width of windows other than
                                        nvim-tree will be equalized.
      • {number}?                       (`boolean`, default: `false`)
                                        |'number'|
      • {relativenumber}?               (`boolean`, default: `false`)
                                        |'relativenumber'|
      • {signcolumn}?                   (`"yes"|"auto"|"no"`, default:
                                        `"yes"`) |'signcolumn'|
      • {width}?                        (`nvim_tree.config.view.width.spec|nvim_tree.config.view.width`)
                                        (default: `30`)
      • {float}?                        (`nvim_tree.config.view.float`)
                                        |nvim_tree.config.view.float|

*nvim_tree.config.view.float*
    Configure floating window behaviour

    {open_win_config} is passed to |nvim_open_win()|, default: >lua
        {
          relative = "editor",
          border = "rounded",
          width = 30,
          height = 30,
          row = 1,
          col = 1,
        }
<

    Fields: ~
      • {enable}?              (`boolean`) (default: `false`)
      • {quit_on_focus_loss}?  (`boolean`, default: `true`) Close the floating
                               window when it loses focus.
      • {open_win_config}?     (`vim.api.keyset.win_config|(fun(): vim.api.keyset.win_config)`)
                               (default:
                               `{ relative = "editor", border = "rounded", width = 30, height = 30, row = 1, col = 1, }`)

*nvim_tree.config.view.width*
    Configure dynamic width based on longest line.

    Fields: ~
      • {min}?             (`nvim_tree.config.view.width.spec`) (default:
                           `30`)
      • {max}?             (`nvim_tree.config.view.width.spec`, default: `-1`)
                           -1 for unbounded.
      • {lines_excluded}?  (`("root")[]`, default: `{ "root" }`) Exclude these
                           lines when computing width.
      • {padding}?         (`nvim_tree.config.view.width.spec`, default: `1`)
                           Extra padding to the right.



==============================================================================
Config: renderer                                   *nvim-tree-config-renderer*

*nvim_tree.config.renderer*
    Controls the appearance of the tree.

    {highlight_}                         *nvim_tree.config.renderer.highlight*

    See |nvim-tree-icons-highlighting|
    • `"none"`: no highlighting
    • `"icon"`: icon only
    • `"name"`: name only
    • `"all"`: icon and name

    {decorators}                         *nvim_tree.config.renderer.decorator*

    See |nvim-tree-icons-highlighting|

    A builtin decorator name `string` or |nvim_tree.api.Decorator| class.

    Builtin decorators in their default order:
    • `"Git"`
    • `"Open"`
    • `"Hidden"`
    • `"Modified"`
    • `"Bookmark"`
    • `"Diagnostics"`
    • `"Copied"`
    • `"Cut"`

    Specify {decorators} is a list e.g. `{ "Git", MyDecorator, "Cut" }`

    {root_folder_label}          *nvim_tree.config.renderer.root_folder_label*

    Controls the root folder name and visibility:
    • `string`: |filename-modifiers| format string, default `":~:s?$?/..?"`
    • `false`: to disable
    • `fun(root_cwd: string): string`: return a literal string from root's
      absolute path e.g. >lua
        my_root_folder_label = function(path)
          return ".../" .. vim.fn.fnamemodify(path, ":t")
        end
<

    {hidden_display}                *nvim_tree.config.renderer.hidden_display*

    Summary of hidden nodes, below the last node in the directory, highlighted
    with `NvimTreeHiddenDisplay`.
    • `"none"`: disabled, default
    • `"simple"`: total number of hidden files e.g.
      • (3 hidden)
    • `"all"`: total and by reason: the filter that hid the node e.g.
      • (14 total git: 5, dotfile: 9)
    • `(fun(hidden_stats: nvim_tree.config.renderer.hidden_stats): string)`

    See |nvim_tree.config.renderer.hidden_stats| for details and example.

    Fields: ~
      • {add_trailing}?            (`boolean`, default: `false`) Appends a
                                   trailing slash to folder and symlink folder
                                   target names.
      • {group_empty}?             (`boolean|(fun(relative_path: string): string)`, default: `false`)
                                   Compact folders that only contain a single
                                   folder into one node. Function variant
                                   takes the relative path of grouped folders
                                   and returns a string to be displayed.
      • {full_name}?               (`boolean`, default: `false`) Display nodes
                                   whose name length is wider than the width
                                   of nvim-tree window in floating window.
      • {root_folder_label}?       (`nvim_tree.config.renderer.root_folder_label`, default: `":~:s?$?/..?"`)
                                   |nvim_tree.config.renderer.root_folder_label|
      • {indent_width}?            (`integer`, default: `2`) Number of spaces
                                   for each tree nesting level. Minimum 1.
      • {hidden_display}?          (`nvim_tree.config.renderer.hidden_display`, default: `none`)
                                   |nvim_tree.config.renderer.hidden_display|
      • {symlink_destination}?     (`boolean`, default: `true`) Appends an
                                   arrow followed by the target of the
                                   symlink.
      • {decorators}?              (`nvim_tree.config.renderer.decorator[]`, default: `{ "Git", "Open", "Hidden", "Modified", "Bookmark", "Diagnostics", "Copied", "Cut", }`)
                                   List in order of additive precedence.
      • {highlight_git}?           (`nvim_tree.config.renderer.highlight`)
                                   (default: `"none"`)
      • {highlight_opened_files}?  (`nvim_tree.config.renderer.highlight`)
                                   (default: `"none"`)
      • {highlight_hidden}?        (`nvim_tree.config.renderer.highlight`)
                                   (default: `"none"`)
      • {highlight_modified}?      (`nvim_tree.config.renderer.highlight`)
                                   (default: `"none"`)
      • {highlight_bookmarks}?     (`nvim_tree.config.renderer.highlight`)
                                   (default: `"none"`)
      • {highlight_diagnostics}?   (`nvim_tree.config.renderer.highlight`)
                                   (default: `"none"`)
      • {highlight_clipboard}?     (`nvim_tree.config.renderer.highlight`)
                                   (default: `"name"`)
      • {special_files}?           (`string[]`, default: `{ "Cargo.toml", "Makefile", "README.md", "readme.md", }`)
                                   Highlight special files and directories
                                   with `NvimTreeSpecial*`.
      • {indent_markers}?          (`nvim_tree.config.renderer.indent_markers`)
                                   |nvim_tree.config.renderer.indent_markers|
      • {icons}?                   (`nvim_tree.config.renderer.icons`)
                                   |nvim_tree.config.renderer.icons|

*nvim_tree.config.renderer.hidden_stats*
    Number of hidden nodes in a directory by reason: the filter that hid the
    node.

    Passed to your |nvim_tree.config.renderer.hidden_display| function e.g. >lua

        ---@param hidden_stats nvim_tree.config.renderer.hidden_stats
        ---@return string? summary
        local my_hidden_display = function(hidden_stats)
          local total_count = 0
          for reason, count in pairs(hidden_stats) do
            total_count = total_count + count
          end

          if total_count > 0 then
            return "(" .. tostring(total_count) .. " hidden)"
          end
          return nil
        end
<

    Fields: ~
      • {bookmark}     (`integer`)
      • {buf}          (`integer`)
      • {custom}       (`integer`)
      • {dotfile}      (`integer`)
      • {git}          (`integer`)
      • {live_filter}  (`integer`)

*nvim_tree.config.renderer.icons*
    Icons and separators

    {_placement}                   *nvim_tree.config.renderer.icons.placement*
    • `"before"`: before file/folder, after the file/folders icons
    • `"after"`: after file/folder
    • `"signcolumn"`: far left, requires |nvim_tree.config.view| {signcolumn}.
    • `"right_align"`: far right

    Fields: ~
      • {git_placement}?          (`nvim_tree.config.renderer.icons.placement`)
                                  (default: `before`)
      • {hidden_placement}?       (`nvim_tree.config.renderer.icons.placement`)
                                  (default: `after`)
      • {modified_placement}?     (`nvim_tree.config.renderer.icons.placement`)
                                  (default: `after`)
      • {bookmarks_placement}?    (`nvim_tree.config.renderer.icons.placement`)
                                  (default: `signcolumn`)
      • {diagnostics_placement}?  (`nvim_tree.config.renderer.icons.placement`)
                                  (default: `signcolumn`)
      • {padding}?                (`table`)
                                     *nvim_tree.config.renderer.icons.padding*
                                  • {icon}? (`string`, default: `" "`) Between
                                    icon and filename.
                                  • {folder_arrow}? (`string`, default: `" "`)
                                    Between folder arrow icon and file/folder
                                    icon.
      • {symlink_arrow}?          (`string`, default: `" ➛ "`) Separator
                                  between symlink source and target.
      • {show}?                   (`nvim_tree.config.renderer.icons.show`)
                                  |nvim_tree.config.renderer.icons.show|
      • {glyphs}?                 (`nvim_tree.config.renderer.icons.glyphs`)
                                  |nvim_tree.config.renderer.icons.glyphs|
      • {web_devicons}?           (`nvim_tree.config.renderer.icons.web_devicons`)
                                  |nvim_tree.config.renderer.icons.web_devicons|

*nvim_tree.config.renderer.icons.glyphs*
    See |nvim-tree-icons-highlighting|.

    Glyphs that appear in the sign column must have length <= 2

    Fields: ~
      • {default}?   (`string`, default: `""`) Files
      • {symlink}?   (`string`) (default: `""`)
      • {bookmark}?  (`string`) (default: `"󰆤"`)
      • {modified}?  (`string`) (default: `"●"`)
      • {hidden}?    (`string`) (default: `"󰜌"`)
      • {folder}?    (`table`)                     *nvim_tree.config.renderer.icons.glyphs.folder*
                     • {arrow_closed}? (`string`) (default: left arrow)
                     • {arrow_open}? (`string`) (default: down arrow)
                     • {default}? (`string`) (default: `""`)
                     • {open}? (`string`) (default: `""`)
                     • {empty}? (`string`) (default: `""`)
                     • {empty_open}? (`string`) (default: `""`)
                     • {symlink}? (`string`) (default: `""`)
                     • {symlink_open}? (`string`) (default: `""`)
      • {git}?       (`table`)                        *nvim_tree.config.renderer.icons.glyphs.git*
                     • {unstaged}? (`string`) (default: `"✗"`)
                     • {staged}? (`string`) (default: `"✓"`)
                     • {unmerged}? (`string`) (default: `""`)
                     • {renamed}? (`string`) (default: `"➜"`)
                     • {untracked}? (`string`) (default: `"★"`)
                     • {deleted}? (`string`) (default: `""`)
                     • {ignored}? (`string`) (default: `"◌"`)

*nvim_tree.config.renderer.icons.show*
    See |nvim-tree-icons-highlighting|.

    Fields: ~
      • {file}?          (`boolean`) (default: `true`)
      • {folder}?        (`boolean`) (default: `true`)
      • {git}?           (`boolean`) (default: `true`)
      • {modified}?      (`boolean`) (default: `true`)
      • {hidden}?        (`boolean`) (default: `false`)
      • {diagnostics}?   (`boolean`) (default: `true`)
      • {bookmarks}?     (`boolean`) (default: `true`)
      • {folder_arrow}?  (`boolean`, default: `true`) Show a small arrow
                         before the folder node. Arrow will be a part of the
                         node when using
                         |nvim_tree.config.renderer.indent_markers|.

*nvim_tree.config.renderer.icons.web_devicons*
    Configure optional plugin `nvim-tree/nvim-web-devicons`, see
    |nvim-tree-icons-highlighting|.

    Fields: ~
      • {file}?    (`table`)
                           *nvim_tree.config.renderer.icons.web_devicons.file*
                   • {enable}? (`boolean`) (default: `true`)
                   • {color}? (`boolean`) (default: `true`)
      • {folder}?  (`table`)
                         *nvim_tree.config.renderer.icons.web_devicons.folder*
                   • {enable}? (`boolean`) (default: `false`)
                   • {color}? (`boolean`) (default: `true`)

*nvim_tree.config.renderer.indent_markers*

    Fields: ~
      • {enable}?         (`boolean`, default: `false`) Display indent markers
                          when folders are open.
      • {inline_arrows}?  (`boolean`, default: `true`) Display folder arrows
                          in the same column as indent marker when using
                          |nvim_tree.config.renderer.icons.padding|
                          {folder_arrow}
      • {icons}?          (`table`)
                              *nvim_tree.config.renderer.indent_markers.icons*
                          Before the file/directory, length 1.
                          • {corner}? (`string`) (default: `"└"`)
                          • {edge}? (`string`) (default: `"│"`)
                          • {item}? (`string`) (default: `"│"`)
                          • {bottom}? (`string`) (default: `"─"`)
                          • {none}? (`string`) (default: `" "`)



==============================================================================
Config: hijack_directories               *nvim-tree-config-hijack-directories*

*nvim_tree.config.hijack_directories*
    Hijack directory buffers by replacing the directory buffer with the tree.

    Disable this option if you use vim-dirvish or dirbuf.nvim.

    If |nvim_tree.config| {hijack_netrw} and {disable_netrw} are `false` this
    feature will be disabled.

    Fields: ~
      • {enable}?     (`boolean`) (default: `true`)
      • {auto_open}?  (`boolean`, default: `true`) Open if the tree was
                      previously closed.



==============================================================================
Config: update_focused_file             *nvim-tree-config-update-focused-file*

*nvim_tree.config.update_focused_file*
    Update the focused file on |BufEnter|, uncollapsing folders recursively.

    Fields: ~
      • {enable}?       (`boolean`) (default: `false`)
      • {update_root}?  (`nvim_tree.config.update_focused_file.update_root`)
                        |nvim_tree.config.update_focused_file.update_root|
      • {exclude}?      (`boolean|(fun(args: vim.api.keyset.create_autocmd.callback_args): boolean)`, default: `false`)
                        A function called on |BufEnter| that returns true if
                        the file should not be focused when opening.

*nvim_tree.config.update_focused_file.update_root*
    Update the root directory of the tree if the file is not under the current
    root directory.

    Prefers vim's cwd and |nvim_tree.config| {root_dirs}, falling back to the
    directory containing the file.

    Requires |nvim_tree.config.update_focused_file|

    Fields: ~
      • {enable}?       (`boolean`) (default: `false`)
      • {ignore_list}?  (`string[]`, default: `{}`) List of buffer names and
                        filetypes that will not update the root dir of the
                        tree if the file isn't found under the current root
                        directory.



==============================================================================
Config: system_open                             *nvim-tree-config-system-open*

*nvim_tree.config.system_open*
    Open files or directories via the OS.

    Nvim:
    • `>=` 0.10 uses |vim.ui.open()| unless {cmd} is specified
    • `<` 0.10 calls external {cmd}:
      • UNIX: `xdg-open`
      • macOS: `open`
      • Windows: `cmd`

    Once nvim-tree minimum Nvim version is updated to 0.10, this configuration
    will no longer be necessary and will be removed.

    Fields: ~
      • {cmd}?   (`string`) The open command itself
      • {args}?  (`string[]`, default: `{}` or `{ "/c", "start", '""' }` on
                 windows) Optional argument list. Leave empty for OS specific
                 default.



==============================================================================
Config: git                                             *nvim-tree-config-git*

*nvim_tree.config.git*
    Git operations are run in the background thus status may not immediately
    appear.

    Processes will be killed if they exceed {timeout} ms. Git integration will
    be disabled following 5 timeouts and you will be notified.

    Git integration may be disabled for git top-level directories via
    {disable_for_dirs}:
    • A list of relative paths evaluated with |fnamemodify()| `:p` OR
    • A function that is passed an absolute path and returns `true` to disable

    See |nvim-tree-icons-highlighting|.

    Fields: ~
      • {enable}?             (`boolean`) (default: `true`)
      • {show_on_dirs}?       (`boolean`, default: `true`) Show status icons
                              of children when directory itself has no status
                              icon
      • {show_on_open_dirs}?  (`boolean`, default: `true`) Show status icons
                              of children on directories that are open.
                              Requires {show_on_dirs}.
      • {disable_for_dirs}?   (`string[]|(fun(path: string): boolean)`,
                              default: `{}`) Disable for top level paths.
      • {timeout}?            (`integer`, default: `400`) `git` processes
                              timeout milliseconds.
      • {cygwin_support}?     (`boolean`, default: `false`) Use `cygpath` if
                              available to resolve paths for git.



==============================================================================
Config: diagnostics                             *nvim-tree-config-diagnostics*

*nvim_tree.config.diagnostics*
    Integrate with |lsp| or COC diagnostics.

    See |nvim-tree-icons-highlighting|.

    Fields: ~
      • {enable}?             (`boolean`) (default: `false`)
      • {debounce_delay}?     (`integer`, default: `500`) Idle milliseconds
                              between diagnostic event and tree update.
      • {show_on_dirs}?       (`boolean`, default: `false`) Show diagnostic
                              icons on parent directories.
      • {show_on_open_dirs}?  (`boolean`, default: `true`) Show diagnostics
                              icons on directories that are open. Requires
                              {show_on_dirs}.
      • {diagnostic_opts}?    (`boolean`, default: `false`) Global
                              |vim.diagnostic.Opts| overrides {severity} and
                              {icons}
      • {severity}?           (`table`)
                                       *nvim_tree.config.diagnostics.severity*
                              • {min}? (`vim.diagnostic.Severity`, default:
                                HINT) |vim.diagnostic.severity|
                              • {max}? (`vim.diagnostic.Severity`, default:
                                ERROR) |vim.diagnostic.severity|
      • {icons}?              (`table`)                                *nvim_tree.config.diagnostics.icons*
                              • {hint}? (`string`) (default: `""` )
                              • {info}? (`string`) (default: `""` )
                              • {warning}? (`string`) (default: `""` )
                              • {error}? (`string`) (default: `""` )



==============================================================================
Config: modified                                   *nvim-tree-config-modified*

*nvim_tree.config.modified*
    Indicate which files have unsaved modification. To see modified status in
    the tree you will need:
    • |nvim_tree.config.renderer.icons.show| {modified} OR
    • |nvim_tree.config.renderer| {highlight_modified}

    See |nvim-tree-icons-highlighting|.

    Fields: ~
      • {enable}?             (`boolean`) (default: `false`)
      • {show_on_dirs}?       (`boolean`, default: `true`) Show modified
                              indication on directory whose children are
                              modified.
      • {show_on_open_dirs}?  (`boolean`, default: `false`) Show modified
                              indication on open directories. Requires
                              {show_on_dirs}.



==============================================================================
Config: filters                                     *nvim-tree-config-filters*

*nvim_tree.config.filters*
    Filters may be applied to the tree to exlude the display of
    file/directories.

    Multiple filters may be applied at once.

    Filters can be set at startup or toggled live via API with default
    mappings.

    `I     `{git_ignored}`         `|nvim_tree.api.filter.git.ignored.toggle()|
    Ignore files based on `.gitignore`. Requires |nvim_tree.config.git|

    `H     `{dotfiles}`            `|nvim_tree.api.filter.dotfiles.toggle()|
    Filter dotfiles: files/directories starting with a `.`

    `C     `{git_clean}`           `|nvim_tree.api.filter.git.clean.toggle()|
    Filter files with no git status. `.gitignore` files will not be filtered
    when {git_ignored}, as they are effectively dirty.

    `B     `{no_buffer}`           `|nvim_tree.api.filter.no_buffer.toggle()|
    Filter files that have no |buflisted()| buffer. For performance reasons
    buffer delete/wipe may not be immediately shown. A reload or filesystem
    event will always result in an update.

    `M     `{no_bookmark}`         `|nvim_tree.api.filter.no_bookmark.toggle()|
    Filter files that are not bookmarked. Enabling this is not useful as there
    is no means yet to persist bookmarks.

    `U     `{custom}`              `|nvim_tree.api.filter.custom.toggle()|
    Disable specific file/directory names via:
    • a list of backslash escaped |regular-expression| e.g. `"^\\.git""`
    • a function passed the absolute path of the directory.

    All filters including live filter may be disabled via {enable} and toggled
    with |nvim_tree.api.filter.toggle()|

    Files/directories may be {exclude}d from filtering: they will always be
    shown, overriding {git_ignored}, {dotfiles} and {custom}.

    Fields: ~
      • {enable}?       (`boolean`, default: `true`) Enable all filters.
      • {git_ignored}?  (`boolean`) (default: `true`)
      • {dotfiles}?     (`boolean`) (default: `false`)
      • {git_clean}?    (`boolean`) (default: `false`)
      • {no_buffer}?    (`boolean`) (default: `false`)
      • {no_bookmark}?  (`boolean`) (default: `false`)
      • {custom}?       (`string[]|(fun(absolute_path: string): boolean)`)
                        (default: `{}`)
      • {exclude}?      (`string[]`) (default: `{}`)



==============================================================================
Config: live_filter                             *nvim-tree-config-live-filter*

*nvim_tree.config.live_filter*
    Live filter allows you to filter the tree nodes dynamically using
    |regular-expression| matching.

    This feature is bound to the `f` key by default. The filter can be cleared
    with the `F` key by default.

    Fields: ~
      • {prefix}?               (`string`, default: `"[FILTER]: "`) Prefix of
                                the filter displayed in the buffer.
      • {always_show_folders}?  (`boolean`, default: `true`) Whether to filter
                                folders or not.



==============================================================================
Config: filesystem_watchers             *nvim-tree-config-filesystem-watchers*

*nvim_tree.config.filesystem_watchers*
    Use file system watchers (libuv `uv_fs_event_t`) to monitor the filesystem
    for changes and update the tree.

    With this feature, the tree will be partially updated on specific
    directory changes, resulting in better performance.

    Watchers may be disabled for absolute directory paths via {ignore_dirs}.
    • A list of |regular-expression| to match a path, backslash escaped e.g.
      `"my-proj/\\.build$"` OR
    • A function that is passed an absolute path and returns `true` to disable
      This may be useful when a path is not in `.gitignore` or git integration
      is disabled.

    After {max_events} consecutive filesystem events on a single directory
    with an interval < {debounce_delay}:
    • The filesystem watcher will be disabled for that directory.
    • A warning notification will be shown.
    • Consider adding this directory to {ignore_dirs}

    Fields: ~
      • {enable}?          (`boolean`) (default: `true`)
      • {debounce_delay}?  (`integer`, default: `50`) Idle milliseconds
                           between filesystem change and tree update.
      • {ignore_dirs}?     (`string[]|(fun(path: string): boolean)`, default: `{ "/.ccls-cache", "/build", "/node_modules", "/target", "/.zig-cache"}`)
                           Disable for specific directories.
      • {max_events}?      (`integer`, default: `0` or `1000` on windows)
                           Disable for a single directory after {max_events}
                           consecutive events with an interval <
                           {debounce_delay}. Set to 0 to allow unlimited
                           consecutive events.



==============================================================================
Config: actions                                     *nvim-tree-config-actions*

*nvim_tree.config.actions*

    Fields: ~
      • {use_system_clipboard}?  (`boolean`, default: `true`) Use the system
                                 clipboard for copy/paste. Copied text will be
                                 stored in registers `+` (system), otherwise,
                                 it will be stored in `1` and `"`
      • {change_dir}?            (`nvim_tree.config.actions.change_dir`)
                                 |nvim_tree.config.actions.change_dir|
      • {expand_all}?            (`nvim_tree.config.actions.expand_all`)
                                 |nvim_tree.config.actions.expand_all|
      • {file_popup}?            (`nvim_tree.config.actions.file_popup`)
                                 |nvim_tree.config.actions.file_popup|
      • {open_file}?             (`nvim_tree.config.actions.open_file`)
                                 |nvim_tree.config.actions.open_file|
      • {remove_file}?           (`nvim_tree.config.actions.remove_file`)
                                 |nvim_tree.config.actions.remove_file|

*nvim_tree.config.actions.change_dir*
    vim |current-directory| behaviour

    Fields: ~
      • {enable}?              (`boolean`, default: `true`) Change the working
                               directory when changing directories in the tree
      • {global}?              (`boolean`, default: `false`) Use `:cd` instead
                               of `:lcd` when changing directories.
      • {restrict_above_cwd}?  (`boolean`, default: `false`) Restrict changing
                               to a directory above the global cwd.

*nvim_tree.config.actions.expand_all*
    Configure |nvim_tree.api.tree.expand_all()| and
    |nvim_tree.api.node.expand()|

    Fields: ~
      • {max_folder_discovery}?  (`integer`, default: `300`) Limit the number
                                 of folders being explored when expanding
                                 every folder. Avoids hanging Nvim when
                                 running this action on very large folders.
      • {exclude}?               (`string[]`, default: `{}`) A list of
                                 directories that should not be expanded
                                 automatically e.g
                                 `{ ".git", "target", "build" }`

*nvim_tree.config.actions.file_popup*
    {file_popup} floating window.

    {open_win_config} is passed to |nvim_open_win()|, default: >lua
        {
          col = 1,
          row = 1,
          relative = "cursor",
          border = "shadow",
          style = "minimal",
        }
<

    You shouldn't define {width} and {height} values here. They will be
    overridden to fit the file_popup content.

    Fields: ~
      • {open_win_config}?  (`vim.api.keyset.win_config`) (default:
                            `{ col = 1, row = 1, relative = "cursor", border = "shadow", style = "minimal", }`)

*nvim_tree.config.actions.open_file*
    Opening files.

    Fields: ~
      • {quit_on_open}?   (`boolean`, default: `false`) Closes the explorer
                          when opening a file
      • {eject}?          (`boolean`, default: `true`) Prevent new opened file
                          from opening in the same window as the tree.
      • {resize_window}?  (`boolean`, default: `true`) Resizes the tree when
                          opening a file
      • {window_picker}?  (`nvim_tree.config.actions.open_file.window_picker`)
                          |nvim_tree.config.actions.open_file.window_picker|

*nvim_tree.config.actions.open_file.window_picker*
    A window picker will be shown when there are multiple windows available to
    open a file. It will show a single character identifier in each window's
    status line.

    When it is not enabled the file will open in the window from which you
    last opened the tree, obeying {exclude}

    You may define a {picker} function that should return the window id that
    will open the node, or `nil` if an invalid window is picked or user
    cancelled the action. The picker may create a new window.

    Fields: ~
      • {enable}?   (`boolean`) (default: `true`)
      • {picker}?   (`"default"|(fun(): integer)`, default: `"default"`)
                    Change the default window picker or define your own.
      • {chars}?    (`string`, default:
                    `"ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890"`) Identifier
                    characters to use.
      • {exclude}?  (`nvim_tree.config.actions.open_file.window_picker.exclude`)
                    |nvim_tree.config.actions.open_file.window_picker.exclude|

*nvim_tree.config.actions.open_file.window_picker.exclude*
    Tables of buffer option names mapped to a list of option values. Windows
    containing matching buffers will not be:
    • available when using a window picker
    • selected when not using a window picker

    Fields: ~
      • {filetype}?  (`string[]`) (default:
                     `{ "notify", "lazy", "qf", "diff", "fugitive", "fugitiveblame", }`)
      • {buftype}?   (`string[]`) (default:
                     `{ "nofile", "terminal", "help", }`)

*nvim_tree.config.actions.remove_file*
    Removing files.

    Fields: ~
      • {close_window}?  (`boolean`, default: `true`) Close any window that
                         displays a file when removing that file from the
                         tree.



==============================================================================
Config: trash                                         *nvim-tree-config-trash*

*nvim_tree.config.trash*
    Files may be trashed via an external command that must be installed on
    your system.
    • linux: `gio trash`, from linux package `glib2`
    • macOS: `trash`, from homebrew package `trash`
    • windows: `trash`, requires `trash-cli` or similar

    Fields: ~
      • {cmd}?  (`string`) (default: `"gio trash"` or `"trash"`)



==============================================================================
Config: tab                                             *nvim-tree-config-tab*

*nvim_tree.config.tab*

    Fields: ~
      • {sync}?  (`nvim_tree.config.tab.sync`) |nvim_tree.config.tab.sync|

*nvim_tree.config.tab.sync*

    Fields: ~
      • {open}?    (`boolean`, default: `false`) Opens the tree automatically
                   when switching tabpage or opening a new tabpage if the tree
                   was previously open.
      • {close}?   (`boolean`, default: `false`) Closes the tree across all
                   tabpages when the tree is closed.
      • {ignore}?  (`string[]`, default: `{}`) List of filetypes or buffer
                   names on new tab that will prevent `open` and `close`



==============================================================================
Config: notify                                       *nvim-tree-config-notify*

*nvim_tree.config.notify*
    nvim-tree |vim.log.levels|
    • `ERROR`: hard errors e.g. failure to read from the file system.
    • `WARN`: non-fatal errors e.g. unable to system open a file.
    • `INFO`: information only e.g. file copy path confirmation.
    • `DEBUG`: information for troubleshooting, e.g. failures in some window
      closing operations.

    Fields: ~
      • {threshold}?      (`vim.log.levels`, default: `vim.log.levels.INFO`)
                          Specify minimum notification |vim.log.levels|
      • {absolute_path}?  (`boolean`, default: `true`) Use absolute paths in
                          FS action notifications, otherwise item names.



==============================================================================
Config: bookmarks                                 *nvim-tree-config-bookmarks*

*nvim_tree.config.bookmarks*
    Optionally {persist} bookmarks to a json file:
    • `true` use default: `stdpath("data") .. "/nvim-tree-bookmarks.json"`
    • `false` do not persist
    • `string` absolute path of your choice

    Fields: ~
      • {persist}?  (`boolean|string`) (default: `false`)



==============================================================================
Config: help                                           *nvim-tree-config-help*

*nvim_tree.config.help*

    Fields: ~
      • {sort_by}?  (`"key"|"desc"`, default: `"key"`) Alphabetically.



==============================================================================
Config: ui                                               *nvim-tree-config-ui*

*nvim_tree.config.ui*

    Fields: ~
      • {confirm}?  (`nvim_tree.config.ui.confirm`)
                    |nvim_tree.config.ui.confirm|

*nvim_tree.config.ui.confirm*
    Confirmation prompts.

    Fields: ~
      • {remove}?       (`boolean`, default: `true`) Prompt before removing.
      • {trash}?        (`boolean`, default: `true`) Prompt before trashing.
      • {default_yes}?  (`boolean`, default: `false`) If `true` the prompt
                        will be `Y/n`, otherwise `y/N`



==============================================================================
Config: experimental                           *nvim-tree-config-experimental*

*nvim_tree.config.experimental*
    Experimental features that may become default or optional functionality.

    In the event of a problem please disable the experiment and raise an
    issue.



==============================================================================
Config: log                                             *nvim-tree-config-log*

*nvim_tree.config.log*
    Log to a file `nvim-tree.log` in |stdpath()| `log`, usually
    `${XDG_STATE_HOME}/nvim`

    Fields: ~
      • {enable}?    (`boolean`) (default: `false`)
      • {truncate}?  (`boolean`, default: `false`) Remove existing log file at
                     startup.
      • {types}?     (`nvim_tree.config.log.types`)
                     |nvim_tree.config.log.types|

*nvim_tree.config.log.types*
    Specify which information to log.

    Fields: ~
      • {all}?          (`boolean`, default: `false`) Everything.
      • {profile}?      (`boolean`, default: `false`) Timing of some
                        operations.
      • {config}?       (`boolean`, default: `false`) Config and mappings, at
                        startup.
      • {copy_paste}?   (`boolean`, default: `false`) File copy and paste
                        actions.
      • {dev}?          (`boolean`, default: `false`) Used for local
                        development only. Not useful for users.
      • {diagnostics}?  (`boolean`, default: `false`) LSP and COC processing,
                        verbose.
      • {git}?          (`boolean`, default: `false`) Git processing, verbose.
      • {watcher}?      (`boolean`, default: `false`)
                        |nvim_tree.config.filesystem_watchers| processing,
                        verbose.



==============================================================================
Config: Default                                     *nvim-tree-config-default*

Following is the default configuration, see |nvim_tree.config| for details. >lua

    ---@type nvim_tree.config
    local config = {
      on_attach = "default",
      hijack_cursor = false,
      auto_reload_on_write = true,
      disable_netrw = false,
      hijack_netrw = true,
      hijack_unnamed_buffer_when_opening = false,
      root_dirs = {},
      prefer_startup_root = false,
      sync_root_with_cwd = false,
      reload_on_bufenter = false,
      respect_buf_cwd = false,
      select_prompts = false,
      sort = {
        sorter = "name",
        folders_first = true,
        files_first = false,
      },
      view = {
        centralize_selection = false,
        cursorline = true,
        cursorlineopt = "both",
        debounce_delay = 15,
        side = "left",
        preserve_window_proportions = false,
        number = false,
        relativenumber = false,
        signcolumn = "yes",
        width = 30,
        float = {
          enable = false,
          quit_on_focus_loss = true,
          open_win_config = {
            relative = "editor",
            border = "rounded",
            width = 30,
            height = 30,
            row = 1,
            col = 1,
          },
        },
      },
      renderer = {
        add_trailing = false,
        group_empty = false,
        full_name = false,
        root_folder_label = ":~:s?$?/..?",
        indent_width = 2,
        special_files = { "Cargo.toml", "Makefile", "README.md", "readme.md" },
        hidden_display = "none",
        symlink_destination = true,
        decorators = { "Git", "Open", "Hidden", "Modified", "Bookmark", "Diagnostics", "Copied", "Cut", },
        highlight_git = "none",
        highlight_diagnostics = "none",
        highlight_opened_files = "none",
        highlight_modified = "none",
        highlight_hidden = "none",
        highlight_bookmarks = "none",
        highlight_clipboard = "name",
        indent_markers = {
          enable = false,
          inline_arrows = true,
          icons = {
            corner = "└",
            edge = "│",
            item = "│",
            bottom = "─",
            none = " ",
          },
        },
        icons = {
          web_devicons = {
            file = {
              enable = true,
              color = true,
            },
            folder = {
              enable = false,
              color = true,
            },
          },
          git_placement = "before",
          modified_placement = "after",
          hidden_placement = "after",
          diagnostics_placement = "signcolumn",
          bookmarks_placement = "signcolumn",
          padding = {
            icon = " ",
            folder_arrow = " ",
          },
          symlink_arrow = " ➛ ",
          show = {
            file = true,
            folder = true,
            folder_arrow = true,
            git = true,
            modified = true,
            hidden = false,
            diagnostics = true,
            bookmarks = true,
          },
          glyphs = {
            default = "",
            symlink = "",
            bookmark = "󰆤",
            modified = "●",
            hidden = "󰜌",
            folder = {
              arrow_closed = "",
              arrow_open = "",
              default = "",
              open = "",
              empty = "",
              empty_open = "",
              symlink = "",
              symlink_open = "",
            },
            git = {
              unstaged = "✗",
              staged = "✓",
              unmerged = "",
              renamed = "➜",
              untracked = "★",
              deleted = "",
              ignored = "◌",
            },
          },
        },
      },
      hijack_directories = {
        enable = true,
        auto_open = true,
      },
      update_focused_file = {
        enable = false,
        update_root = {
          enable = false,
          ignore_list = {},
        },
        exclude = false,
      },
      system_open = {
        cmd = "",
        args = {},
      },
      git = {
        enable = true,
        show_on_dirs = true,
        show_on_open_dirs = true,
        disable_for_dirs = {},
        timeout = 400,
        cygwin_support = false,
      },
      diagnostics = {
        enable = false,
        show_on_dirs = false,
        show_on_open_dirs = true,
        debounce_delay = 500,
        severity = {
          min = vim.diagnostic.severity.HINT,
          max = vim.diagnostic.severity.ERROR,
        },
        icons = {
          hint = "",
          info = "",
          warning = "",
          error = "",
        },
        diagnostic_opts = false,
      },
      modified = {
        enable = false,
        show_on_dirs = true,
        show_on_open_dirs = true,
      },
      filters = {
        enable = true,
        git_ignored = true,
        dotfiles = false,
        git_clean = false,
        no_buffer = false,
        no_bookmark = false,
        custom = {},
        exclude = {},
      },
      live_filter = {
        prefix = "[FILTER]: ",
        always_show_folders = true,
      },
      filesystem_watchers = {
        enable = true,
        debounce_delay = 50,
        max_events = 0,
        ignore_dirs = {
          "/.ccls-cache",
          "/build",
          "/node_modules",
          "/target",
          "/.zig-cache",
        },
      },
      actions = {
        use_system_clipboard = true,
        change_dir = {
          enable = true,
          global = false,
          restrict_above_cwd = false,
        },
        expand_all = {
          max_folder_discovery = 300,
          exclude = {},
        },
        file_popup = {
          open_win_config = {
            col = 1,
            row = 1,
            relative = "cursor",
            border = "shadow",
            style = "minimal",
          },
        },
        open_file = {
          quit_on_open = false,
          eject = true,
          resize_window = true,
          relative_path = true,
          window_picker = {
            enable = true,
            picker = "default",
            chars = "ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890",
            exclude = {
              filetype = { "notify", "packer", "qf", "diff", "fugitive", "fugitiveblame" },
              buftype = { "nofile", "terminal", "help" },
            },
          },
        },
        remove_file = {
          close_window = true,
        },
      },
      trash = {
        cmd = "gio trash",
      },
      tab = {
        sync = {
          open = false,
          close = false,
          ignore = {},
        },
      },
      notify = {
        threshold = vim.log.levels.INFO,
        absolute_path = true,
      },
      help = {
        sort_by = "key",
      },
      ui = {
        confirm = {
          remove = true,
          trash = true,
          default_yes = false,
        },
      },
      bookmarks = {
        persist = false,
      },
      experimental = {
      },
      log = {
        enable = false,
        truncate = false,
        types = {
          all = false,
          config = false,
          copy_paste = false,
          dev = false,
          diagnostics = false,
          git = false,
          profile = false,
          watcher = false,
        },
      },
    }
<



==============================================================================
API                                                            *nvim-tree-api*

nvim-tree exposes a public API. This is non breaking, with additions made as
necessary.

Please do not require or use modules other than `nvim-tree.api`, as internal
modules will change without notice.

The API is separated into multiple modules:
• |nvim-tree-api-appearance|
• |nvim-tree-api-commands|
• |nvim-tree-api-events|
• |nvim-tree-api-filter|
• |nvim-tree-api-fs|
• |nvim-tree-api-git|
• |nvim-tree-api-map|
• |nvim-tree-api-marks|
• |nvim-tree-api-node|
• |nvim-tree-api-tree|

Modules are accessed via `api.<module>.<function>`

Example invocation of the `reload` function in the `tree` module: >lua

    local api = require("nvim-tree.api")
    api.tree.reload()
<

Generally, functions accepting a |nvim_tree.api.Node| as their first argument
will use the node under the cursor when that argument is not present or nil.
e.g. the following are functionally identical: >lua

    api.node.open.edit(nil, { focus = true })

    api.node.open.edit(api.tree.get_node_under_cursor(), { focus = true })
<


*nvim_tree.api.Node*
    The Node class is a data class. Instances may be provided by API functions
    for use as a:
    • handle to pass back to API functions e.g. |nvim_tree.api.node.run.cmd()|
    • reference in callbacks e.g. |nvim_tree.config.sort.Sorter| {sorter}

    Please do not mutate the contents of any Node object.

    Fields: ~
      • {absolute_path}   (`string`) of the file or directory
      • {name}            (`string`) file or directory name
      • {parent}?         (`nvim_tree.api.DirectoryNode`) parent directory,
                          nil for root
      • {type}            (`"file"|"directory"|"link"`) |uv.fs_stat()| {type}
      • {executable}      (`boolean`) file is executable
      • {fs_stat}?        (`uv.fs_stat.result`) at time of last tree display,
                          see |uv.fs_stat()|
      • {git_status}      (`nvim_tree.git.Status?`) for files and directories
      • {diag_severity}?  (`lsp.DiagnosticSeverity`) diagnostic status
      • {hidden}          (`boolean`) node is not visible in the tree

*nvim_tree.git.Status*
    Git statuses for a single node.

    `nvim_tree.git.XY`: 2 character string, see `man 1 git-status` "Short
    Format"

    {dir} status is derived from its contents:
    • `direct`: inherited from child files
    • `indirect`: inherited from child directories

    Fields: ~
      • {file}?  (`nvim_tree.git.XY`) status of a file node
      • {dir}?   (`table<"direct"|"indirect", nvim_tree.git.XY[]>`) direct
                 inclusive-or indirect status



==============================================================================
API: appearance                                     *nvim-tree-api-appearance*

hi_test()                                 *nvim_tree.api.appearance.hi_test()*
    Open a new buffer displaying all nvim-tree highlight groups, their link
    chain and concrete definition.

    Similar to `:so $VIMRUNTIME/syntax/hitest.vim` as per |:highlight|


==============================================================================
API: commands                                         *nvim-tree-api-commands*

get()                                           *nvim_tree.api.commands.get()*
    Retrieve all |nvim-tree-commands|

    They have been created via |nvim_create_user_command()|, see also
    |lua-guide-commands-create|

    Return: ~
        (`table[]`)
        • {name} (`string`) name of the `:NvimTree*` command
        • {command}
          (`fun(args: vim.api.keyset.create_user_command.command_args)`)
          function that the command will execute
        • {opts} (`vim.api.keyset.user_command`) |command-attributes|


==============================================================================
API: config                                             *nvim-tree-api-config*

default()                                     *nvim_tree.api.config.default()*
    Default nvim-tree config.

    Return: ~
        (`nvim_tree.config`) immutable deep clone

global()                                       *nvim_tree.api.config.global()*
    Global current nvim-tree config.

    Return: ~
        (`nvim_tree.config`) immutable deep clone

user()                                           *nvim_tree.api.config.user()*
    Reference to config passed to |nvim-tree-setup|

    Return: ~
        (`nvim_tree.config?`) nil when no config passed to setup


==============================================================================
API: events                                             *nvim-tree-api-events*

subscribe({event_type}, {callback})         *nvim_tree.api.events.subscribe()*
    Register a handler for an event, see |nvim-tree-events|.

    Parameters: ~
      • {event_type}  (`string`) |nvim_tree_events_kind|
      • {callback}    (`fun(payload: table?)`)


==============================================================================
API: filter                                             *nvim-tree-api-filter*

custom.toggle()                         *nvim_tree.api.filter.custom.toggle()*
    Toggle |nvim_tree.config.filters| {custom} filter.

dotfiles.toggle()                     *nvim_tree.api.filter.dotfiles.toggle()*
    Toggle |nvim_tree.config.filters| {dotfiles} filter.

git.clean.toggle()                   *nvim_tree.api.filter.git.clean.toggle()*
    Toggle |nvim_tree.config.filters| {git_clean} filter.

git.ignored.toggle()               *nvim_tree.api.filter.git.ignored.toggle()*
    Toggle |nvim_tree.config.filters| {git_ignored} filter.

live.clear()                               *nvim_tree.api.filter.live.clear()*
    Exit live filter mode.

live.start()                               *nvim_tree.api.filter.live.start()*
    Enter live filter mode. Opens an input window with |filetype|
    `NvimTreeFilter`

no_bookmark.toggle()               *nvim_tree.api.filter.no_bookmark.toggle()*
    Toggle |nvim_tree.config.filters| {no_bookmark} filter.

no_buffer.toggle()                   *nvim_tree.api.filter.no_buffer.toggle()*
    Toggle |nvim_tree.config.filters| {no_buffer} filter.

toggle()                                       *nvim_tree.api.filter.toggle()*
    Toggle |nvim_tree.config.filters| {enable} which applies to ALL filters.


==============================================================================
API: fs                                                     *nvim-tree-api-fs*

clear_clipboard()                         *nvim_tree.api.fs.clear_clipboard()*
    Clear the nvim-tree clipboard.

copy.absolute_path({node})             *nvim_tree.api.fs.copy.absolute_path()*
    Copy the absolute path to the system clipboard.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

copy.basename({node})                       *nvim_tree.api.fs.copy.basename()*
    Copy the name with extension omitted to the system clipboard.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

copy.filename({node})                       *nvim_tree.api.fs.copy.filename()*
    Copy the name to the system clipboard.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

copy.node({node})                               *nvim_tree.api.fs.copy.node()*
    Copy to the nvim-tree clipboard.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

copy.relative_path({node})             *nvim_tree.api.fs.copy.relative_path()*
    Copy the path relative to the tree root to the system clipboard.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

create({node})                                     *nvim_tree.api.fs.create()*
    Prompt to create a file or directory.

    When {node} is a file it will be created in the parent directory.

    Use a trailing `"/"` to create a directory e.g. `"foo/"`

    Multiple directories/files may be created e.g. `"foo/bar/baz"`

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

cut({node})                                           *nvim_tree.api.fs.cut()*
    Cut to the nvim-tree clipboard.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

paste({node})                                       *nvim_tree.api.fs.paste()*
    Paste from the nvim-tree clipboard.

    If {node} is a file it will pasted in the parent directory.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

print_clipboard()                         *nvim_tree.api.fs.print_clipboard()*
    Print the contents of the nvim-tree clipboard.

remove({node})                                     *nvim_tree.api.fs.remove()*
    Delete from the file system.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

rename({node})                                     *nvim_tree.api.fs.rename()*
    Prompt to rename by name.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

rename_basename({node})                   *nvim_tree.api.fs.rename_basename()*
    Prompt to rename by name with extension omitted.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

rename_full({node})                           *nvim_tree.api.fs.rename_full()*
    Prompt to rename by absolute path.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

rename_node({node})                           *nvim_tree.api.fs.rename_node()*
    Prompt to rename.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

rename_sub({node})                             *nvim_tree.api.fs.rename_sub()*
    Prompt to rename by absolute path with name omitted.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)

trash({node})                                       *nvim_tree.api.fs.trash()*
    Trash as per |nvim_tree.config.trash|

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`)


==============================================================================
API: git                                                   *nvim-tree-api-git*

reload()                                          *nvim_tree.api.git.reload()*
    Update the git status of the entire tree.


==============================================================================
API: map                                                   *nvim-tree-api-map*

keymap.current()                          *nvim_tree.api.map.keymap.current()*
    Retrieve all buffer local mappings for nvim-tree. These are the mappings
    that are applied by |nvim_tree.config| {on_attach}, which may include
    default mappings.

    Return: ~
        (`vim.api.keyset.get_keymap[]`)

keymap.default()                          *nvim_tree.api.map.keymap.default()*
    Retrieves the buffer local mappings for nvim-tree that are applied by
    |nvim_tree.api.map.on_attach.default()|

    Return: ~
        (`vim.api.keyset.get_keymap[]`)

on_attach.default({bufnr})             *nvim_tree.api.map.on_attach.default()*
    Apply all |nvim-tree-mappings-default|. Call from your |nvim_tree.config|
    {on_attach}.

    Parameters: ~
      • {bufnr}  (`integer`) use the `bufnr` passed to {on_attach}


==============================================================================
API: marks                                               *nvim-tree-api-marks*

bulk.delete()                              *nvim_tree.api.marks.bulk.delete()*
    Delete all marked, prompting if |nvim_tree.config.ui.confirm| {remove}

bulk.move()                                  *nvim_tree.api.marks.bulk.move()*
    Prompts for a directory to move all marked nodes into.

bulk.trash()                                *nvim_tree.api.marks.bulk.trash()*
    Delete all marked, prompting if |nvim_tree.config.ui.confirm| {trash}

clear()                                          *nvim_tree.api.marks.clear()*
    Clear all marks.

get()                                              *nvim_tree.api.marks.get()*
    Return the node if it is marked.

    Return: ~
        (`nvim_tree.api.Node?`)

list()                                            *nvim_tree.api.marks.list()*
    Retrieve all marked nodes.

    Return: ~
        (`nvim_tree.api.Node[]`)

navigate.next()                          *nvim_tree.api.marks.navigate.next()*
    Navigate to the next marked node, wraps.

navigate.prev()                          *nvim_tree.api.marks.navigate.prev()*
    Navigate to the previous marked node, wraps.

navigate.select()                      *nvim_tree.api.marks.navigate.select()*
    Prompts for selection of a marked node, sorted by absolute paths. A folder
    will be focused, a file will be opened.

toggle({node})                                  *nvim_tree.api.marks.toggle()*
    Toggle mark.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file or directory


==============================================================================
API: node                                                 *nvim-tree-api-node*

buffer.delete({node}, {opts})             *nvim_tree.api.node.buffer.delete()*
    Deletes node's related buffer, if one exists. Executes |:bdelete| or
    |:bdelete|!

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file
      • {opts}  (`table?`)
                • {force}? (`boolean`, default: false) Proceed even if the
                  buffer is modified.

buffer.wipe({node}, {opts})                 *nvim_tree.api.node.buffer.wipe()*
    Wipes node's related buffer, if one exists. Executes |:bwipe| or |:bwipe|!

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file
      • {opts}  (`table?`) optional
                • {force}? (`boolean`, default: false) Proceed even if the
                  buffer is modified.

collapse({node}, {opts})                       *nvim_tree.api.node.collapse()*
    Collapse the tree under a directory or a file's parent directory.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file
      • {opts}  (`table?`) optional
                • {keep_buffers}? (`boolean`, default: false) Do not collapse
                  nodes with open buffers.

expand({node}, {opts})                           *nvim_tree.api.node.expand()*
    Recursively expand all nodes under a directory or a file's parent
    directory.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file
      • {opts}  (`table?`) optional
                • {expand_until}?
                  (`fun(expansion_count: integer, node: Node): boolean`)
                  Return `true` if `node` should be expanded.
                  `expansion_count` is the total number of folders expanded.

                              *nvim_tree.api.node.navigate.diagnostics.next()*
navigate.diagnostics.next({node})
    Navigate to the next item showing diagnostic status.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                    *nvim_tree.api.node.navigate.diagnostics.next_recursive()*
navigate.diagnostics.next_recursive({node})
    Navigate to the next item showing diagnostic status, recursively. Needs
    |nvim_tree.config.diagnostics| {show_on_dirs}

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                              *nvim_tree.api.node.navigate.diagnostics.prev()*
navigate.diagnostics.prev({node})
    Navigate to the previous item showing diagnostic status.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                    *nvim_tree.api.node.navigate.diagnostics.prev_recursive()*
navigate.diagnostics.prev_recursive({node})
    Navigate to the previous item showing diagnostic status, recursively.
    Needs |nvim_tree.config.diagnostics| {show_on_dirs}

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

navigate.git.next({node})             *nvim_tree.api.node.navigate.git.next()*
    Navigate to the next item showing git status.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                            *nvim_tree.api.node.navigate.git.next_recursive()*
navigate.git.next_recursive({node})
    Navigate to the next item showing git status, recursively. Needs
    |nvim_tree.config.git| {show_on_dirs}

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                      *nvim_tree.api.node.navigate.git.next_skip_gitignored()*
navigate.git.next_skip_gitignored({node})
    Navigate to the next item showing git status, skipping `.gitignore`

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

navigate.git.prev({node})             *nvim_tree.api.node.navigate.git.prev()*
    Navigate to the previous item showing git status.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                            *nvim_tree.api.node.navigate.git.prev_recursive()*
navigate.git.prev_recursive({node})
    Navigate to the previous item showing git status, recursively. Needs
    |nvim_tree.config.git| {show_on_dirs}

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                      *nvim_tree.api.node.navigate.git.prev_skip_gitignored()*
navigate.git.prev_skip_gitignored({node})
    Navigate to the previous item showing git status, skipping `.gitignore`

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                   *nvim_tree.api.node.navigate.opened.next()*
navigate.opened.next({node})
    Navigate to the next |bufloaded()| file.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                   *nvim_tree.api.node.navigate.opened.prev()*
navigate.opened.prev({node})
    Navigate to the previous |bufloaded()| file.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

navigate.parent({node})                 *nvim_tree.api.node.navigate.parent()*
    Navigate to the parent directory of the node.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                  *nvim_tree.api.node.navigate.parent_close()*
navigate.parent_close({node})
    Navigate to the parent directory of the node, closing it.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                 *nvim_tree.api.node.navigate.sibling.first()*
navigate.sibling.first({node})
    Navigate to the first node in the current node's folder.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                  *nvim_tree.api.node.navigate.sibling.last()*
navigate.sibling.last({node})
    Navigate to the last node in the current node's folder.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                  *nvim_tree.api.node.navigate.sibling.next()*
navigate.sibling.next({node})
    Navigate to the next node in the current node's folder, wraps.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                  *nvim_tree.api.node.navigate.sibling.prev()*
navigate.sibling.prev({node})
    Navigate to the previous node in the current node's folder, wraps.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

open.edit({node}, {opts})                     *nvim_tree.api.node.open.edit()*
    • file: open as per |nvim_tree.config.actions.open_file|
    • directory: expand or collapse
    • root: change directory up

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

open.horizontal({node}, {opts})         *nvim_tree.api.node.open.horizontal()*
    Open file in a new horizontal split.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

                              *nvim_tree.api.node.open.horizontal_no_picker()*
open.horizontal_no_picker({node}, {opts})
    Open file in a new horizontal split without using the window picker.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

                                  *nvim_tree.api.node.open.no_window_picker()*
open.no_window_picker({node}, {opts})
    Open file without using the window picker.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

open.preview({node}, {opts})               *nvim_tree.api.node.open.preview()*
    Open file with |'bufhidden'| set to `delete`.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

                                 *nvim_tree.api.node.open.preview_no_picker()*
open.preview_no_picker({node}, {opts})
    Open file with |'bufhidden'| set to `delete` without using the window
    picker.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

                               *nvim_tree.api.node.open.replace_tree_buffer()*
open.replace_tree_buffer({node})
    Open file in place: in the nvim-tree window.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file

open.tab({node}, {opts})                       *nvim_tree.api.node.open.tab()*
    Open file in a new tab.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

open.tab_drop({node})                     *nvim_tree.api.node.open.tab_drop()*
    Switch to tab containing window with selected file if it exists. Open file
    in new tab otherwise.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                *nvim_tree.api.node.open.toggle_group_empty()*
open.toggle_group_empty({node}, {opts})
    Toggle |nvim_tree.config.renderer| {group_empty} for a directory. Needs
    {group_empty} set.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

open.vertical({node}, {opts})             *nvim_tree.api.node.open.vertical()*
    Open file in a new vertical split.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

                                *nvim_tree.api.node.open.vertical_no_picker()*
open.vertical_no_picker({node}, {opts})
    Open file in a new vertical split without using the window picker.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) file
      • {opts}  (`table?`) optional
                • {quit_on_open}? (`boolean`, default: false) Quits the tree
                  when opening the file.
                • {focus}? (`boolean`, default: false) Keep focus in the tree
                  when opening the file.

run.cmd({node})                                 *nvim_tree.api.node.run.cmd()*
    Enter |cmdline| with the full path of the node and the cursor at the start
    of the line.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

run.system({node})                           *nvim_tree.api.node.run.system()*
    Execute |nvim_tree.config.system_open|.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

show_info_popup({node})                 *nvim_tree.api.node.show_info_popup()*
    Open a popup window showing: fullpath, size, accessed, modified, created.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file


==============================================================================
API: tree                                                 *nvim-tree-api-tree*

change_root({path})                         *nvim_tree.api.tree.change_root()*
    Change the tree's root to a path.

    Parameters: ~
      • {path}  (`string?`) absolute or relative path.

change_root_to_node({node})         *nvim_tree.api.tree.change_root_to_node()*
    Change the tree's root to a folder node or the parent of a file node.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

                                  *nvim_tree.api.tree.change_root_to_parent()*
change_root_to_parent({node})
    Change the tree's root to the parent of a node.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory or file

close()                                           *nvim_tree.api.tree.close()*
    Close the tree, affecting all tabs as per |nvim_tree.config.tab.sync|
    {close}

close_in_all_tabs()                   *nvim_tree.api.tree.close_in_all_tabs()*
    Close the tree in all tabs.

close_in_this_tab()                   *nvim_tree.api.tree.close_in_this_tab()*
    Close the tree in this tab only.

collapse_all({opts})                       *nvim_tree.api.tree.collapse_all()*
    Collapse the tree.

    Parameters: ~
      • {opts}  (`table?`) optional
                • {keep_buffers}? (`boolean`, default: false) Do not collapse
                  nodes with open buffers.

expand_all({node}, {opts})                   *nvim_tree.api.tree.expand_all()*
    Recursively expand all nodes under the tree root or specified folder.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node?`) directory
      • {opts}  (`table?`) optional
                • {expand_until}?
                  (`fun(expansion_count: integer, node: Node): boolean`)
                  Return `true` if `node` should be expanded.
                  `expansion_count` is the total number of folders expanded.

find_file({opts})                             *nvim_tree.api.tree.find_file()*
    Find and focus a file or folder in the tree. Finds current buffer unless
    otherwise specified.

    Parameters: ~
      • {opts}  (`table?`) optional
                • {buf}? (`string|integer`) Absolute/relative path OR `bufnr`
                  to find.
                • {open}? (`boolean`, default: false) Open the tree if
                  necessary.
                • {current_window}? (`boolean`, default: false) Requires
                  {open}: open in the current window.
                • {winid}? (`integer`) Open the tree in the specified
                  |window-ID|, overrides {current_window}
                • {update_root}? (`boolean`, default: false) Update root after
                  find, see |nvim_tree.config.update_focused_file|
                  {update_root}
                • {focus}? (`boolean`, default: false) Focus the tree window.

focus()                                           *nvim_tree.api.tree.focus()*
    Focus the tree, opening it if necessary. Retained for compatibility, use
    |nvim_tree.api.tree.open()| with no arguments instead.

get_node_under_cursor()           *nvim_tree.api.tree.get_node_under_cursor()*
    Retrieve the currently focused node.

    Return: ~
        (`nvim_tree.api.Node?`) nil if tree is not visible.

get_nodes()                                   *nvim_tree.api.tree.get_nodes()*
    Retrieve a hierarchical list of all the nodes.

    Return: ~
        (`nvim_tree.api.Node[]`)

is_tree_buf({bufnr})                        *nvim_tree.api.tree.is_tree_buf()*
    Checks if a buffer is an nvim-tree.

    Parameters: ~
      • {bufnr}  (`integer?`) 0 or nil for current buffer.

    Return: ~
        (`boolean`)

is_visible({opts})                           *nvim_tree.api.tree.is_visible()*
    Checks if nvim-tree is visible on the current, specified or any tab.

    Parameters: ~
      • {opts}  (`table?`) optional
                • {tabpage}? (`integer`) |tab-ID| 0 or nil for current.
                • {any_tabpage}? (`boolean`, default: false) Visible on any
                  tab.

    Return: ~
        (`boolean`)

open({opts})                                       *nvim_tree.api.tree.open()*
    Open the tree, focusing it if already open.

    Parameters: ~
      • {opts}  (`table?`) optional
                • {path}? (`string`) Root directory for the tree
                • {current_window}? (`boolean`, default: false) Open the tree
                  in the current window
                • {winid}? (`integer`) Open the tree in the specified
                  |window-ID|, overrides {current_window}
                • {find_file}? (`boolean`, default: false) Find the current
                  buffer.
                • {update_root}? (`boolean`, default: false) Update root
                  following {find_file}, see
                  |nvim_tree.config.update_focused_file| {update_root}

reload()                                         *nvim_tree.api.tree.reload()*
    Refresh the tree. Does nothing if closed.

resize({opts})                                   *nvim_tree.api.tree.resize()*
    Resize the tree, persisting the new size. Resets to
    |nvim_tree.config.view| {width} when no {opts} provided.

    Only one option is supported, priority order: {width}, {absolute},
    {relative}.

    {absolute} and {relative} do nothing when |nvim_tree.config.view| {width}
    is a function.

    Parameters: ~
      • {opts}  (`table?`) optional
                • {width}?
                  (`nvim_tree.config.view.width.spec|nvim_tree.config.view.width`)
                  New |nvim_tree.config.view| {width} value.
                • {absolute}? (`integer`) Set the width.
                • {relative}? (`integer`) Increase or decrease the width.

search_node()                               *nvim_tree.api.tree.search_node()*
    Open the search dialogue.

toggle({opts})                                   *nvim_tree.api.tree.toggle()*
    Open or close the tree.

    Parameters: ~
      • {opts}  (`table?`) optional
                • {path}? (`string`) Root directory for the tree
                • {current_window}? (`boolean`, default: false) Open the tree
                  in the current window
                • {winid}? (`integer`) Open the tree in the specified
                  |window-ID|, overrides {current_window}
                • {find_file}? (`boolean`, default: false) Find the current
                  buffer.
                • {update_root}? (`boolean`, default: false) Update root
                  following {find_file}, see
                  |nvim_tree.config.update_focused_file| {update_root}
                • {focus}? (`boolean`, default: true) Focus the tree when
                  opening.

toggle_help()                               *nvim_tree.api.tree.toggle_help()*
    Toggle help view.

winid({opts})                                     *nvim_tree.api.tree.winid()*
    Retrieve the window of the open tree.

    Parameters: ~
      • {opts}  (`table?`) optional
                • {tabpage}? (`integer`) |tab-ID| 0 or nil for current.

    Return: ~
        (`integer?`) |window-ID|, nil if tree is not visible.


==============================================================================
Class: Class                                                 *nvim-tree-class*

nvim-tree uses the https://github.com/rxi/classic class framework adding safe
casts, instanceof mixin and conventional destructors.

The key differences between classic and ordinary Lua classes:
• The constructor |nvim_tree.Class:new()| is not responsible for allocation:
  `self` is available when the constructor is called.
• Instances are constructed via the `__call` meta method: `SomeClass(args)`

Classes are conventionally named using camel case e.g. `MyClass`

Classes are created by extending another class: >lua

    local Class = require("nvim-tree.classic")

    ---@class (exact) Fruit: nvim_tree.Class
    ---@field ...
    local Fruit = Class:extend()

    ---@class (exact) Apple: Fruit
    ---@field ...
    local Apple = Fruit:extend()
<

Implementing a constructor |nvim_tree.Class:new()| is optional, however it
must call the `super` constructor: >lua

    ---@protected
    ---@param args AppleArgs
    function Apple:new(args)

      ---@type FruitArgs
      local fruit_args = ...

      Apple.super.new(self, fruit_args)
      ---
<

Create an instance of a class using the `__call` meta method that will invoke
the constructor: >lua

    ---@type AppleArgs
    local args = ...

    local an_apple = Apple(args)
    -- above will call `Apple:new(args)`
<

In order to strongly type instantiation, the following pattern is used to type
the meta method `__call` with arguments and return: >lua

    ---@class (exact) Fruit: nvim_tree.Class
    ---@field ...
    local Fruit = Class:extend()

    ---@class (exact) FruitArgs
    ---@field ...

    ---@class Fruit
    ---@overload fun(args: FruitArgs): Fruit

    ---@protected
    ---@param args FruitArgs
    function Fruit:new(args)
<


*nvim_tree.Class*

    Fields: ~
      • {super}      (`nvim_tree.Class`) Parent class, `Class` for base
                     classes.
      • {new}        (`fun(self: nvim_tree.Class, ...: any)`) See
                     |nvim_tree.Class:new()|.
      • {destroy}    (`fun(self: nvim_tree.Class)`) See
                     |nvim_tree.Class:destroy()|.
      • {extend}     (`fun(self: nvim_tree.Class): [nvim_tree.Class]`) See
                     |nvim_tree.Class:extend()|.
      • {implement}  (`fun(self: nvim_tree.Class, mixin: nvim_tree.Class)`)
                     See |nvim_tree.Class:implement()|.
      • {is}         (`fun(self: nvim_tree.Class, class: T): boolean`) See
                     |nvim_tree.Class:is()|.
      • {as}         (`fun(self: nvim_tree.Class, class: T): T?`) See
                     |nvim_tree.Class:as()|.
      • {nop}        (`fun(self: nvim_tree.Class, ...: any)`) See
                     |nvim_tree.Class:nop()|.


Class:as({class})                                       *nvim_tree.Class:as()*
    Type safe cast.

    If instance |nvim_tree.Class:is()|, cast to {class} and return it,
    otherwise nil.

    Parameters: ~
      • {class}  (`any`) `<T>`

    Return: ~
        (`any?`) `<T>`

Class:destroy()                                    *nvim_tree.Class:destroy()*
    Conventional destructor, optional, must be called by the owner.

    Parent destructor must be invoked using the form `Parent.destroy(self)`

Class:extend()                                      *nvim_tree.Class:extend()*
    Create a new class by extending another class.

    Base classes extend `Class`

    Return: ~
        (`[nvim_tree.Class]`) child class

Class:implement({mixin})                         *nvim_tree.Class:implement()*
    Add the methods and fields of a mixin using the form
    `SomeClass:implement(MixinClass)`

    If the mixin has fields, it must implement a constructor.

    Parameters: ~
      • {mixin}  (`nvim_tree.Class`)

Class:is({class})                                       *nvim_tree.Class:is()*
    Instance of.

    Test whether an object is {class}, inherits {class} or implements mixin
    {class}.

    Parameters: ~
      • {class}  (`any`) `<T>`

    Return: ~
        (`boolean`)

Class:new({...})                                       *nvim_tree.Class:new()*
    Constructor: `self` has been allocated and is available.

    Super constructor must be called using the form
    `Child.super.new(self, parent_args)`

    Parameters: ~
      • {...}  (`any`) constructor arguments

Class:nop({...})                                       *nvim_tree.Class:nop()*
    Utility method to bypass unused param warnings in abstract methods.

    Parameters: ~
      • {...}  (`any`)


==============================================================================
Class: Decorator                                   *nvim-tree-class-decorator*

Highlighting and icons for nodes are provided by Decorators, see
|nvim-tree-icons-highlighting| for an overview.

Decorators are rendered in |nvim_tree.config.renderer| {decorators} order of
additive precedence, with later decorators applying additively over earlier.

You may provide your own in addition to the builtin decorators, see
|nvim-tree-class-decorator-example|.

Decorators may:
• Add icons
• Set a highlight group name for the name or icons
• Override node icon

To register your decorator:
• Create a class that extends |nvim_tree.api.Decorator|
• Register it by adding the class to |nvim_tree.config.renderer| {decorators}

Your decorator will be constructed and executed each time the tree is
rendered.

Your class must:
• |nvim_tree.Class:extend()| the interface |nvim_tree.api.Decorator|
• Provide a no-arguments constructor |nvim_tree.Class:new()| that sets the
  mandatory fields:
  • {enabled}
  • {highlight_range}
  • {icon_placement}
• Call |nvim_tree.api.Decorator:define_sign()| in your constructor when
  {icon_placement} is `"signcolumn"`

Your class may:
• Implement methods to provide decorations:
  • |nvim_tree.api.Decorator:highlight_group()|
  • |nvim_tree.api.Decorator:icon_node()|
  • |nvim_tree.api.Decorator:icons()|


*nvim_tree.api.Decorator*
    Extends: |nvim_tree.Class|

    Decorator interface

    Fields: ~
      • {enabled}          (`boolean`) Enable this decorator.
      • {highlight_range}  (`nvim_tree.config.renderer.highlight`) What to
                           highlight: |nvim_tree.config.renderer.highlight|
      • {icon_placement}   (`"none"|nvim_tree.config.renderer.icons.placement`)
                           Where to place the icons:
                           |nvim_tree.config.renderer.icons.placement|
      • {icon_node}        (`fun(self: nvim_tree.api.Decorator, node: nvim_tree.api.Node): nvim_tree.api.highlighted_string?`)
                           See |nvim_tree.api.Decorator:icon_node()|.
      • {icons}            (`fun(self: nvim_tree.api.Decorator, node: nvim_tree.api.Node): nvim_tree.api.highlighted_string[]?`)
                           See |nvim_tree.api.Decorator:icons()|.
      • {highlight_group}  (`fun(self: nvim_tree.api.Decorator, node: nvim_tree.api.Node): string?`)
                           See |nvim_tree.api.Decorator:highlight_group()|.
      • {define_sign}      (`fun(self: nvim_tree.api.Decorator, icon: nvim_tree.api.highlighted_string?)`)
                           See |nvim_tree.api.Decorator:define_sign()|.

*nvim_tree.api.highlighted_string*
    Text or glyphs with optional highlight group names to apply to it.

    Fields: ~
      • {str}  (`string`) One or many glyphs/characters.
      • {hl}   (`string[]`) Highlight group names to apply in order. Empty
               table for no highlighting.


Decorator:define_sign({icon})          *nvim_tree.api.Decorator:define_sign()*
    Defines a sign for an icon. This is mandatory and necessary only when
    {icon_placement} is `"signcolumn"`

    This must be called during your constructor for all icons that you will
    return from |nvim_tree.api.Decorator:icons()|

    Parameters: ~
      • {icon}  (`nvim_tree.api.highlighted_string?`) does nothing if nil

                                   *nvim_tree.api.Decorator:highlight_group()*
Decorator:highlight_group({node})
    One highlight group that applies additively to the {node} name for
    {highlight_range}.

    Abstract, optional to implement.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node`)

    Return: ~
        (`string?`) highlight group name `nil` when no highlighting to apply
        to the node

Decorator:icon_node({node})              *nvim_tree.api.Decorator:icon_node()*
    Icon to override for the node.

    Abstract, optional to implement.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node`)

    Return: ~
        (`nvim_tree.api.highlighted_string?`) icon `nil` for no override

Decorator:icons({node})                      *nvim_tree.api.Decorator:icons()*
    Icons to add to the node as per {icon_placement}

    Abstract, optional to implement.

    Parameters: ~
      • {node}  (`nvim_tree.api.Node`)

    Return: ~
        (`nvim_tree.api.highlighted_string[]?`) icons `nil` or empty table for
        no icons. Only the first glyph of {str} is used when {icon_placement}
        is `"signcolumn"`


==============================================================================
Class: Decorator example                   *nvim-tree-class-decorator-example*

A decorator class for nodes named "example", overriding all builtin decorators
except for Cut.
• Highlights node name with `IncSearch`
• Creates two icons `"1"` and `"2"` placed after the node name, highlighted
  with `DiffAdd` and `DiffText`
• Replaces the node icon with `"N"`, highlighted with `Error `

Create a class file `~/.config/nvim/lua/my-decorator.lua`

Require and register it during |nvim-tree-setup|: >lua

    local MyDecorator = require("my-decorator")

    require("nvim-tree").setup({
      renderer = {
        decorators = {
          "Git",
          "Open",
          "Hidden",
          "Modified",
          "Bookmark",
          "Diagnostics",
          "Copied",
          MyDecorator,
          "Cut",
        },
      },
    })
<

Contents of `my-decorator.lua`: >lua

    ---@class (exact) MyDecorator: nvim_tree.api.Decorator
    ---@field private my_icon1 nvim_tree.api.highlighted_string
    ---@field private my_icon2 nvim_tree.api.highlighted_string
    ---@field private my_icon_node nvim_tree.api.highlighted_string
    ---@field private my_highlight_group string
    local MyDecorator = require("nvim-tree.api").Decorator:extend()

    ---Mandatory constructor  :new()  will be called once per tree render, with no arguments.
    function MyDecorator:new()
      self.enabled            = true
      self.highlight_range    = "name"
      self.icon_placement     = "after"

      -- create your icons and highlights once, applied to every node
      self.my_icon1           = { str = "1", hl = { "DiffAdd" } }
      self.my_icon2           = { str = "2", hl = { "DiffText" } }
      self.my_icon_node       = { str = "N", hl = { "Error" } }
      self.my_highlight_group = "IncSearch"

      -- Define the icon signs only once
      -- Only needed if you are using icon_placement = "signcolumn"
      -- self:define_sign(self.my_icon1)
      -- self:define_sign(self.my_icon2)
    end

    ---Override node icon
    ---@param node nvim_tree.api.Node
    ---@return nvim_tree.api.highlighted_string? icon_node
    function MyDecorator:icon_node(node)
      if node.name == "example" then
        return self.my_icon_node
      else
        return nil
      end
    end

    ---Return two icons for DecoratorIconPlacement "after"
    ---@param node nvim_tree.api.Node
    ---@return nvim_tree.api.highlighted_string[]? icons
    function MyDecorator:icons(node)
      if node.name == "example" then
        return { self.my_icon1, self.my_icon2, }
      else
        return nil
      end
    end

    ---Exactly one highlight group for DecoratorHighlightRange "name"
    ---@param node nvim_tree.api.Node
    ---@return string? highlight_group
    function MyDecorator:highlight_group(node)
      if node.name == "example" then
        return self.my_highlight_group
      else
        return nil
      end
    end

    return MyDecorator
<



 vim:tw=78:ts=8:sw=4:sts=4:et:ft=help:norl: