-- -- whisp-box-mib.mib -- GENERATED FROM ui_db.xml -- -- **************************************************************************************************** -- Copyright 2005 - 2015 (c), Cambium Networks -- Cambium Networks Confidential Proprietary -- **************************************************************************************************** -- -- Canopy Box Level(AP,SM and Backhaul) MIB definitions. -- -- *************************************************************************************************** WHISP-BOX-MIBV2-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, MacAddress FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF WhispLUID, WhispMACAddress, EventString FROM WHISP-TCV2-MIB whispModules, whispBox FROM WHISP-GLOBAL-REG-MIB ; whispBoxLevelMibModule MODULE-IDENTITY LAST-UPDATED "200304150000Z" ORGANIZATION "Cambium Networks" CONTACT-INFO "Cambium Networks Support email: support@cambiumnetworks.com" DESCRIPTION "This module contains generic Box-Level MIB definitions for Canopy Radios." ::= {whispModules 8} -- ------------------------------------------------------------------------- -- Top Level Registrations whispBoxStatus OBJECT IDENTIFIER ::= {whispBox 1} whispBoxMACAddressFiltering OBJECT IDENTIFIER ::= {whispBox 23} whispMACAddressFilterConfig OBJECT IDENTIFIER ::= {whispBoxMACAddressFiltering 1} whispBoxConfig OBJECT IDENTIFIER ::= {whispBox 2} whispAfcStatus OBJECT IDENTIFIER ::= {whispBox 24} whispBoxControls OBJECT IDENTIFIER ::= {whispBox 3} whispBoxEventLog OBJECT IDENTIFIER ::= {whispBox 5} whispBoxConf OBJECT IDENTIFIER ::= {whispBox 6} whispBoxGroups OBJECT IDENTIFIER ::= {whispBoxConf 1} whispBoxBridgeVar OBJECT IDENTIFIER ::= {whispBox 7} whispBoxCPVar OBJECT IDENTIFIER ::= {whispBox 9} whispBoxEvent OBJECT IDENTIFIER ::= {whispBox 12} whispBoxDHCPClientEvent OBJECT IDENTIFIER ::= {whispBoxEvent 1} whispBoxPoEEvent OBJECT IDENTIFIER ::= {whispBoxEvent 2} whispBoxRadioAlarmEvent OBJECT IDENTIFIER ::= {whispBoxEvent 3} whispBoxMinModRateEvent OBJECT IDENTIFIER ::= {whispBoxEvent 4} whispBoxDNS OBJECT IDENTIFIER ::= {whispBox 13} whispBoxSNMPv3 OBJECT IDENTIFIER ::= {whispBox 14} whispBoxLink OBJECT IDENTIFIER ::= {whispBox 18} whispBoxLinkTestConfig OBJECT IDENTIFIER ::= {whispBoxLink 1} whispBoxLinkTestResult OBJECT IDENTIFIER ::= {whispBoxLink 2} whispBoxLinkTestMVCResult OBJECT IDENTIFIER ::= {whispBoxLink 5} whispUserAuthSecurity OBJECT IDENTIFIER ::= {whispBox 19} whispBoxRFPhysical OBJECT IDENTIFIER ::= {whispBox 15} whispBoxRFConfig OBJECT IDENTIFIER ::= {whispBox 16} whispBoxCbrsConfig OBJECT IDENTIFIER ::= {whispBox 21} whispBoxGPS OBJECT IDENTIFIER ::= {whispBox 22} -- ------------------------------------------------------------------------- -- Canopy radio status page whispBoxSoftwareVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of software. Should be noted in the event customer has technical difficulties and need to contact technical support." ::={whispBoxStatus 1} whispBoxFPGAVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of FPGA." ::={whispBoxStatus 2} whispBoxEsn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Electronic serial number(MAC address) assigned to Radio." ::={whispBoxStatus 3} whispBoxBoot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software boot version." ::={whispBoxStatus 4} boxTemperature OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Radio temperature." ::={whispBoxStatus 5} boxDeviceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the device." ::={whispBoxStatus 6} boxDeviceTypeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type ID." ::={whispBoxStatus 7} boxEncryption OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disclaimer: This OID remains current for backwards compatibility with external tools. Please use boxEncryptionDetailed for more accurate info. Pre-15.2 software - Returns device encryption configuration as follows: AES when configured to AES. DES when configured to DES or when encryption is not enabled. Note that as of 15.2, DES encryption is no longer supported. 15.2 software and newer - Returns device encryption configuration as follows for AP: AES when configured to AES. DES when encryption is not enabled or if not capable of encryption. 15.2 software and newer - Returns device encryption capabilities as follows for SM: Note that this only indicates encryption capabilities but it does not indicate if the device has encryption enabled. AES if device is capable AES encryption. DES if device is not capable of encryption." ::={whispBoxStatus 8} etherLinkStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link status." ::={whispBoxStatus 9} boxFrequency OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency band of the device." ::={whispBoxStatus 10} platformVer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware platform version. For internal use." ::={whispBoxStatus 11} platformType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage, Advantage, Russian, Russian - Advantage." ::={whispBoxStatus 12} dhcpLanIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN interface IP obtained through DHCP." ::={whispBoxStatus 13} dhcpLanSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN interface Subnet Mask obtained through DHCP." ::={whispBoxStatus 14} dhcpLanGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN interface Gateway obtained through DHCP." ::={whispBoxStatus 15} dhcpRfPublicIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RF Public interface IP obtained through DHCP." ::={whispBoxStatus 16} dhcpRfPublicSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RF Public interface Subnet Mask obtained through DHCP." ::={whispBoxStatus 17} dhcpRfPublicGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RF Public interface Gateway obtained through DHCP." ::={whispBoxStatus 18} lanDhcpStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display LAN interface current DHPC status." ::={whispBoxStatus 19} rfPublicDhcpStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display RF Public interface current DHPC status." ::={whispBoxStatus 20} inSyncCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of In Synchronization." ::={whispBoxStatus 21} outSyncCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of Out of Synchronization." ::={whispBoxStatus 22} pllOutLockCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Counter for number of PLL out of Lock." ::={whispBoxStatus 23} txCalFailure OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of TX Calibration failure." ::={whispBoxStatus 24} swVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software version information." ::={whispBoxStatus 25} pldVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PLD version information. Only applicable on P10 and P12 platforms." ::={whispBoxStatus 26} platformInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Platform information." ::={whispBoxStatus 27} antPolarization OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna polarization for FSK radios." ::={whispBoxStatus 28} packetOverloadCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packet overload count." ::={whispBoxStatus 29} whispBoxP11Personality OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Board Personality Configuration" ::={whispBoxStatus 30} whispBoxP11FPGAType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Type" ::={whispBoxStatus 31} whispBoxP11BstrapFPGAVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "P11 Bootstrap FPGA Version." ::={whispBoxStatus 32} numDFSDetections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DFS Detections since last boot." ::={whispBoxStatus 33} rxOverrunPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of received overrun packets error." ::={whispBoxStatus 34} boxTemperatureC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Radio temperature in Celsius." ::={whispBoxStatus 35} boxTemperatureF OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Radio temperature in Fahrenheit." ::={whispBoxStatus 36} bridgeCbFecStatbin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats bin" ::={whispBoxStatus 37} bridgeCbFecStatbout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats bout" ::={whispBoxStatus 38} bridgeCbFecStatbtoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats btoss" ::={whispBoxStatus 39} bridgeCbFecStatbtosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats btosscap" ::={whispBoxStatus 40} bridgeCbFecStatuin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats uin" ::={whispBoxStatus 41} bridgeCbFecStatuout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats uout" ::={whispBoxStatus 42} bridgeCbFecStatutoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats utoss" ::={whispBoxStatus 43} bridgeCbFecStatutosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats utosscap" ::={whispBoxStatus 44} bridgeCbRFStatbin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats bin" ::={whispBoxStatus 45} bridgeCbRFStatbout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats bout" ::={whispBoxStatus 46} bridgeCbRFStatbtoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats btoss" ::={whispBoxStatus 47} bridgeCbRFStatbtosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats btosscap" ::={whispBoxStatus 48} bridgeCbRFStatuin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats uin" ::={whispBoxStatus 49} bridgeCbRFStatuout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats uout" ::={whispBoxStatus 50} bridgeCbRFStatutoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats utoss" ::={whispBoxStatus 51} bridgeCbRFStatutosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats utosscap" ::={whispBoxStatus 52} bridgeCbErrStatNI1QSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats ErrNI1QSend" ::={whispBoxStatus 53} bridgeCbErrStatNI2QSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats ErrNI2QSend" ::={whispBoxStatus 54} bridgeCbErrStatBridgeFull OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats BridgeFull" ::={whispBoxStatus 55} bridgeCbErrStatSendMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats SendMsg" ::={whispBoxStatus 56} bridgeCbErrStatAPFecQSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats APFecQSend" ::={whispBoxStatus 57} bridgeCbErrStatApRfQSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats ApRfQSend" ::={whispBoxStatus 58} rfStatXmtUDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Unicast Data Count" ::={whispBoxStatus 59} rfStatXmtBDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Broadcast Data Count" ::={whispBoxStatus 60} rfStatRcvUDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Unicast Data Count" ::={whispBoxStatus 61} rfStatRcvBDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Broadcast Data Count" ::={whispBoxStatus 62} rfStatXmtCntlCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Control Count" ::={whispBoxStatus 63} rfStatRcvCntlCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Control Count" ::={whispBoxStatus 64} rfStatInSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats In Sync Count" ::={whispBoxStatus 65} rfStatOutSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Out Sync Count" ::={whispBoxStatus 66} rfStatOverrunCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Overrun Count" ::={whispBoxStatus 67} rfStatUnderrunCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Underrun Count" ::={whispBoxStatus 68} rfStatRcvCorruptDataCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Corrupt Data Count" ::={whispBoxStatus 69} rfStatBadBcastCtlCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Bad Broadcast Control Count" ::={whispBoxStatus 70} rfStatPLLOutOfLockCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF Scheduler Stats PLL Out of Lock Count" ::={whispBoxStatus 71} rfStatBeaconVerMismatchCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Beacon version mismatch count Count of the beacons where the version in the beacon mismatched and prevented registration." ::={whispBoxStatus 72} rfStatBadFreqBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Wrong Frequency Beacon Received Count Count of beacons that was reported on a different frequency than was received." ::={whispBoxStatus 73} rfStatnonLiteBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF Scheduler Stats Non Lite Beacon Received Count This stat is not applicable on the 450 platform." ::={whispBoxStatus 74} rfStatUnsupFeatBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Unsupported Feature Beacon Received Count Count of beacons that the SM has received that is from a beacon that is running a feature this radio does not support, which will prevent registration. If this stat is encountered, upgrade the device to the latest supported software version." ::={whispBoxStatus 75} rfStatUnkwnFeatBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Unknown Feature Beacon Received Count Count of beacons that the SM has received that is from a beacon that is running a feature that is unknown, which will prevent registration. If this stat is encountered, upgrade the device to the latest supported software version." ::={whispBoxStatus 76} rfStatTxCalFailCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF Scheduler Stats TX Calibration Failures Count" ::={whispBoxStatus 77} rfStatBadInSyncIDRcv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Bad In Sync ID Received Count" ::={whispBoxStatus 78} rfStatTempOutOfRange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF Scheduler Stats Temperature Out of Range Count" ::={whispBoxStatus 79} rfStatRSSIOutOfRange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF Scheduler Stats RSSI Out of Range Count" ::={whispBoxStatus 80} rfStatRangeCapEnf OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF Scheduler Stats Range Cap Enforced Count" ::={whispBoxStatus 81} rfStatRcvLTStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Rcv LT Start Count" ::={whispBoxStatus 82} rfStatRcvLTStartHS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Rcv LT Start HS Count" ::={whispBoxStatus 83} rfStatRcvLTResult OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Rcv LT Result Count" ::={whispBoxStatus 84} rfStatXmtLTResult OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Xmt LT Result Count" ::={whispBoxStatus 85} whispFeatureKeyOrigin OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)" ::={whispBoxStatus 86} radioMSN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MSN of the radio." ::={whispBoxStatus 87} updateStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Status of Device Update" ::={whispBoxStatus 88} syslogStatTxSuccesses OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The count of Syslog messages sent to UDP layer." ::={whispBoxStatus 89} syslogStatDropped OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped syslog messages due to device overload and/or resource limitations." ::={whispBoxStatus 90} fecStatLinkLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link lost count" ::={whispBoxStatus 91} fecStatLinkDetected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link detected count" ::={whispBoxStatus 92} natDhcpStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display NAT Public interface current DHPC status." ::={whispBoxStatus 93} fecInDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet in discards count." ::={whispBoxStatus 94} fecInErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet in errors count." ::={whispBoxStatus 95} fecOutDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet out discards count." ::={whispBoxStatus 96} fecOutErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet out errors count." ::={whispBoxStatus 97} rfInDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF in discards count. This attribute is deprecated. Use rfInDiscardsCountExt instead." ::={whispBoxStatus 98} rfInErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF in errors count. This attribute is deprecated. Use rfInErrorsCountExt instead." ::={whispBoxStatus 99} rfOutDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF out discards count. This attribute is deprecated. Use rfOutDiscardsCountExt instead." ::={whispBoxStatus 100} rfOutErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "RF out errors count. This attribute is deprecated. Use rfOutErrorsCountExt instead." ::={whispBoxStatus 101} fecInDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet in discards overload." ::={whispBoxStatus 102} fecOutDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet out discards overload." ::={whispBoxStatus 103} rfInDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rf in discards overload." ::={whispBoxStatus 104} rfOutDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rf out discards overload." ::={whispBoxStatus 105} fpgaCompileInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display the fpga compiled attributes. (Engineering Only)" ::={whispBoxStatus 106} fpgaBuildDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display the entire fpga build date string. (Engineering Only)" ::={whispBoxStatus 107} aggregateBandwidthCap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum aggregate (uplink + downlink) the radio is capable of." ::={whispBoxStatus 108} calibrationStatusBool OBJECT-TYPE SYNTAX INTEGER { notCalibrated(0), calibrated(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean OID to show if device is calibrated. Applicable to FSK and MIMO radios only." ::={whispBoxStatus 109} calibrationStatusBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "String to show if radio is calibrated. Applicable to FSK and MIMO radios only." ::={whispBoxStatus 110} radioEngKeyed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied." ::={whispBoxStatus 111} bridgeCbFecStatfloods OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats Floods (Multipoint AP only)" ::={whispBoxStatus 112} bridgeCbRFStatfloods OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats Floods (Multipoint AP only)" ::={whispBoxStatus 113} catalinaGainRxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Rcv Gain on Catalina Rx CH1. Engineering use only." ::={whispBoxStatus 114} catalinaGainRxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Rcv Gain on Catalina Rx CH2. Engineering use only." ::={whispBoxStatus 115} antType OBJECT-TYPE SYNTAX INTEGER { integrated(0), external(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the antenna is integrated or external (connectorized)." ::={whispBoxStatus 116} rfStatRcvCorruptControlCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Corrupt Control Data Count" ::={whispBoxStatus 117} numLBTDetections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LBT Detections since last boot." ::={whispBoxStatus 118} bridgeCbEthAuxStatbin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats bin" ::={whispBoxStatus 119} bridgeCbEthAuxStatbout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats bout" ::={whispBoxStatus 120} catalinaAttenTxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation on Catalina Tx CH1. Engineering Use Only." ::={whispBoxStatus 121} catalinaAttenTxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Attenuation on Catalina Tx CH2. Engineering use only." ::={whispBoxStatus 122} catalinaCurrDetSetpointTxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Detector Setpoint on Catalina Tx CH1. Engineering Use Only." ::={whispBoxStatus 123} catalinaCurrDetSetpointTxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Detector Setpoint on Catalina Tx CH2. Engineering use only." ::={whispBoxStatus 124} catalinaCurrDetReadRefTxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Detector Reference on Catalina Tx CH1. Engineering Use Only." ::={whispBoxStatus 125} catalinaCurrDetReadRefTxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Detector Reference on Catalina Tx CH2. Engineering use only." ::={whispBoxStatus 126} catalinaCurrDetReadPowerOnTxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Detector PowerOn on Catalina Tx CH1. Engineering Use Only." ::={whispBoxStatus 127} catalinaCurrDetReadPowerOnTxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Detector PowerOn on Catalina Tx CH2. Engineering use only." ::={whispBoxStatus 128} catalinaOpenLoopAttenTxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Open Loop Attenuation on Catalina Tx CH1. Engineering Use Only." ::={whispBoxStatus 129} catalinaOpenLoopAttenTxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Open Loop Attenuation on Catalina Tx CH2. Engineering use only." ::={whispBoxStatus 130} catalinaTargetDetSetpointTxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Target Detector Setpoint on Catalina Tx CH1. Engineering Use Only." ::={whispBoxStatus 131} catalinaTargetDetSetpointTxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Target Detector Setpoint on Catalina Tx CH2. Engineering use only." ::={whispBoxStatus 132} catalinaGainReductionRxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Gain Reduction on Catalina Rx CH1. Engineering Use Only." ::={whispBoxStatus 133} catalinaGainReductionRxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Gain Reduction on Catalina Rx CH2. Engineering use only." ::={whispBoxStatus 134} catalinaLoAttenRxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Lo Attenuation on Catalina Rx CH1. Engineering Use Only." ::={whispBoxStatus 135} catalinaLoAttenRxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Lo Attenuation on Catalina Rx CH2. Engineering use only." ::={whispBoxStatus 136} catalinaTargetGainRxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Target Gain on Catalina Rx CH1. Engineering Use Only." ::={whispBoxStatus 137} catalinaTargetGainRxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Target Gain on Catalina Rx CH2. Engineering use only." ::={whispBoxStatus 138} bridgeCbEthAuxStatfloods OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats Floods (Multipoint AP only)" ::={whispBoxStatus 139} bridgeCbEthAuxStatbtoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats btoss" ::={whispBoxStatus 141} bridgeCbEthAuxStatbtosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats btosscap" ::={whispBoxStatus 142} bridgeCbEthAuxStatuin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats uin" ::={whispBoxStatus 143} bridgeCbEthAuxStatuout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats uout" ::={whispBoxStatus 144} bridgeCbEthAuxStatutoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats utoss" ::={whispBoxStatus 145} bridgeCbEthAuxStatutosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth Aux Stats utosscap" ::={whispBoxStatus 146} radioWatchDogLogged OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This will be set either as 0 if there is no watchdog event logged or 1 if there is." ::={whispBoxStatus 147} radioFatalErrorLogged OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This will be set either as 0 if there is no fatalerror event logged or 1 if there is." ::={whispBoxStatus 148} fecStatLinkUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Uptime of Main Ethernet link in seconds" ::={whispBoxStatus 149} fecAuxStatLinkUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Uptime of 450i/450m Aux Ethernet link in seconds" ::={whispBoxStatus 150} rfStatXmtMDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Multicast Data Count" ::={whispBoxStatus 217} rfStatRcvMDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Multicast Data Count" ::={whispBoxStatus 218} fecStatUnderSizedToss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Undersized Toss Count" ::={whispBoxStatus 219} fecRxBabErr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Error count in Babble Receiver. Applies only to P9 radios and earlier." ::={whispBoxStatus 220} fecTxHbErr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets having Transmit heartbeat error. Applies only to P9 radios and earlier." ::={whispBoxStatus 221} fecEthBusErr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet Busy Error Count Applies only to P9 radios and earlier." ::={whispBoxStatus 222} fecCRCError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets having CRC Error." ::={whispBoxStatus 223} fecRxFifoNoBuf OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times could not get a buffer from Rx Fifo." ::={whispBoxStatus 224} fecRxOverrun OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times Rx Fifo Overrun. Applies only to P9, P13, P15 and P16 radios." ::={whispBoxStatus 225} fecLateCollision OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets having late collision." ::={whispBoxStatus 226} fecRetransLimitExp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets whose retransmision limit expired." ::={whispBoxStatus 227} fecTxUnderrun OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times Tx queue underrun." ::={whispBoxStatus 228} fecCarSenseLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Carrier Sense Lost count." ::={whispBoxStatus 229} fecNoCarrier OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "No carrier asserted by external transceiver during transmission." ::={whispBoxStatus 230} framePeriodCurrent OBJECT-TYPE SYNTAX INTEGER { twoPointFiveMs(0), fiveMs(1), scanning(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "Current frame period of the radio." ::={whispBoxStatus 231} activeTxPowerStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current transmit power level, including potential power backoff information. Not applicable to PMP 450m." ::={whispBoxStatus 232} activeTxPowerHdths OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current transmit power level, in hundredths of dBm. Not appliable on PMP 450m." ::={whispBoxStatus 233} poeT2Status OBJECT-TYPE SYNTAX INTEGER { error(0), notPresent(1), notPresentAndIgnored(2), present(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the 802.3at Type 2 Classification status. This is only available on the 450i." ::={whispBoxStatus 234} fecAuxStatLinkDetected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet link detected count" ::={whispBoxStatus 235} fecAuxStatLinkLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet ink lost count" ::={whispBoxStatus 236} fecAuxInDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet in discards count." ::={whispBoxStatus 237} fecAuxInErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet in errors count." ::={whispBoxStatus 238} fecAuxOutDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet out discards count." ::={whispBoxStatus 239} fecAuxOutErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet out errors count." ::={whispBoxStatus 240} fecAuxCRCError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Number of packets having CRC Error." ::={whispBoxStatus 241} fecAuxRxOverrun OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Number of times Rx Fifo Overrun." ::={whispBoxStatus 242} fecAuxLateCollision OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Number of packets having late collision." ::={whispBoxStatus 243} fecAuxRetransLimitExp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Number of packets whose retransmision limit expired." ::={whispBoxStatus 244} fecAuxTxUnderrun OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Number of times Tx queue underrun." ::={whispBoxStatus 245} fecAuxCarSenseLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Carrier Sense Lost count." ::={whispBoxStatus 246} fecAuxNoCarrier OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet No carrier asserted by external transceiver during transmission." ::={whispBoxStatus 247} fecAuxLargeFrame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Large Frame Error." ::={whispBoxStatus 248} fecAuxRuntFrame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i/450m Aux Ethernet Runt Frame Error." ::={whispBoxStatus 249} fecLargeFrame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Large Frame Error." ::={whispBoxStatus 250} fecRuntFrame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Runt Frame Error." ::={whispBoxStatus 251} camAccID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "CnMaestro Account to which Radio is onboarded." ::={whispBoxStatus 259} cnMaestroStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "CnMaestro connection status." ::={whispBoxStatus 260} daVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device Agent Version number." ::={whispBoxStatus 261} radioStatusOverTemperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Radio operation exceeds max operating temperature - Transmit disabled PMP 450m only." ::={whispBoxStatus 264} hardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Read directly from the resistors on the board is the form Major.Minor (cnMedusa-specific, Engineering Only)" ::={whispBoxStatus 265} productTypeName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Basic product type, based on board type and factory programming." ::={whispBoxStatus 266} radioStatusTransmitControlOverridden OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit mode control is overridden in config PMP 450m only." ::={whispBoxStatus 267} radioStatusTrackingFailure OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Feedback tracking loop is out of tolerance - Transmit disabled PMP 450m only." ::={whispBoxStatus 268} radioStatusSectorWeightsOff OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Sector mode weights disabled PMP 450m only." ::={whispBoxStatus 269} radioStatusRxBeamFormingOff OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Rx beamforming disabled PMP 450m only." ::={whispBoxStatus 270} radioStatusPowerDetectorInactive OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Power detector control not active PMP 450m only." ::={whispBoxStatus 271} radioStatusCatQuadCalFail OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Catalina Tx quadrature calibration failure 450 platform only. Engineering use only." ::={whispBoxStatus 272} nearFieldOperationActive OBJECT-TYPE SYNTAX INTEGER { true(1), false(0)} MAX-ACCESS read-only STATUS current DESCRIPTION "When true(1) near field operation is enabled and near field range correction is being applied. PMP 450m only." ::={whispBoxStatus 273} radioStatusAlarmReason OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Reason code associated with the cause of a Radio Status Alarm being triggered. Provide this code to Cambium Networks Support. PMP 450m only." ::={whispBoxStatus 274} radioStatusAlarm OBJECT-TYPE SYNTAX INTEGER { true(1), false(0)} MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Status Alarm. PMP 450m only." ::={whispBoxStatus 275} forceReassessmentActive OBJECT-TYPE SYNTAX INTEGER { true(1), false(0)} MAX-ACCESS read-only STATUS current DESCRIPTION "When true(1) forced channel assessment is enabled. MU-MIMO only." ::={whispBoxStatus 276} fecExcessiveDeferrals OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Excessive Deferrals." ::={whispBoxStatus 277} rfInDiscardsCountExt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Extended RF in discards count with 64 bit counters." ::={whispBoxStatus 278} rfInErrorsCountExt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Extended RF in errors count with 64 bit counters." ::={whispBoxStatus 279} rfOutDiscardsCountExt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Extended RF out discards count with 64 bit counters." ::={whispBoxStatus 280} rfOutErrorsCountExt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Extended RF out errors count with 64 bit counters." ::={whispBoxStatus 281} minModRateSatisfied OBJECT-TYPE SYNTAX INTEGER { minModRateNotSatisfied(0), minModRateSatisfied(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the minimum modulation rate was satisfied by both devices of the PTP link." ::={whispBoxStatus 282} ethernetPortDisableCounter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the nubmer of times the ethernet port has been disabled due to minimum modulation rate not being satisfied." ::={whispBoxStatus 283} boardModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns Board model of the device." ::={whispBoxStatus 284} txTempPowerCompensation OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Temperature Power Adjustment. Return path B in upper portion and A in lower portion Engineering use only." ::={whispBoxStatus 285} rxTempPowerOffset OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Temperature Power Adjustment in hundredths of dB for RF Path A. Not supported on PMP 450m. Engineering use only." ::={whispBoxStatus 286} boxEncryptionDetailed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device encryption type." ::={whispBoxStatus 287} currentCpuUsage OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the current CPU usage as a percentage." ::={whispBoxStatus 288} fccId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FCC ID" ::={whispBoxStatus 289} fecJabbers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Jabber TO. Indicates tried to send a packet > 2048 bytes. Only valid on 450i and 450b devices." ::={whispBoxStatus 290} fecAuxExcessiveDeferrals OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i Aux Ethernet Excessive Deferrals." ::={whispBoxStatus 291} fecAuxJabbers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i Aux Ethernet Port Transmit Jabber Error. Indicates tried to send a packet > 2048 bytes." ::={whispBoxStatus 292} radioStatusFeedbackRssi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Feedback RSSI. PMP 450m only." ::={whispBoxStatus 293} radioStatusFeedbackOvrg OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Feedback OverRange status flags PMP 450m only." ::={whispBoxStatus 294} txCatAttenChA OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Catalina Attenuation Channel A. Engineering use only." ::={whispBoxStatus 295} txCatAttenChB OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Catalina Attenuation Channel B. Engineering use only." ::={whispBoxStatus 296} fecRxPauseFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet RX Pause Frames Discarded." ::={whispBoxStatus 297} fecAuxRxPauseFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "450i Aux Ethernet RX Pause Frames Discarded." ::={whispBoxStatus 298} fecRxEthernetBounce OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet RX Bounced." ::={whispBoxStatus 299} fecTxEthernetBounce OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet TX Bounced." ::={whispBoxStatus 300} applyConfigStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current Status of Configuration file applied" ::={whispBoxStatus 301} warningText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns the current warning text that is being displayed on the GUI." ::={whispBoxStatus 302} activeEirp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "EIRP in dBm that is currently active on radio. Not supported by 450v." ::={whispBoxStatus 303} primaryDnsCurrentIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current Primary DNS IP" ::={whispBoxStatus 304} secondaryDnsCurrentIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Current Secondary DNS IP" ::={whispBoxStatus 305} activeEirpStr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "EIRP in dBm that is currently active on radio per carrier." ::={whispBoxStatus 306} boxSystemTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Box System Time." ::={whispBoxStatus 307} fecL3L4ChecksumErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets detected with L3/L4 checksum errors. Only valid on 450v, 450b, and 450i devices." ::={whispBoxStatus 308} fecAuxL3L4ChecksumErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Aux Ethernet Number of packets detected with L3/L4 checksum errors. Only valid on 450v and 450i devices." ::={whispBoxStatus 309} rfStatPARspOosCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Power Adjust Response OOS Count" ::={whispBoxStatus 310} rfStatPAReqAsync OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Asynchronous Power Adjust Requests" ::={whispBoxStatus 311} rfStatFrameTooBig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Frame Too Big Count" ::={whispBoxStatus 312} rfStatBadRcvAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Bad Receive Ack Count" ::={whispBoxStatus 313} rfStatBadRcvFragNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Bad Receive Frag Count" ::={whispBoxStatus 314} rfStatRfSYncQMsgsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats RF Sync Q Messages Dropped" ::={whispBoxStatus 315} rfStatBadRcvFragLen OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Bad Receive Frag Length" ::={whispBoxStatus 316} rfStatSchedulerErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Scheduler Error Count" ::={whispBoxStatus 317} rfStatEVMSamples OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats EVM Samples" ::={whispBoxStatus 318} rfStatEVMErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats EVM Errors" ::={whispBoxStatus 319} rfStatTxRingError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats TX Ring Errors" ::={whispBoxStatus 320} rfStatRxRingError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats RX Ring Errors" ::={whispBoxStatus 321} rfStatUnexpectedNonzeroBitmap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Unexpected Nonzero Bitmaps" ::={whispBoxStatus 322} rfStatTDDSlips OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats TDD Slips" ::={whispBoxStatus 324} rfStatVCClearErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats VC Clear Errors" ::={whispBoxStatus 325} rfStatRxNoBuffer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats RX No Buffer Count" ::={whispBoxStatus 326} rfStatOTARCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats OTAR Count" ::={whispBoxStatus 327} rfStatOTARErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats OTAR Errors" ::={whispBoxStatus 328} rfStatWMACFDISRcvOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats WMAC FDIS Receive Overruns" ::={whispBoxStatus 329} rfStatWMACDLCRcvOverruns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats WMAC DLC Receive Overruns" ::={whispBoxStatus 330} rfStatWMACDLCRInfoUnknowns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats WMAC DLC RInfo Unknowns" ::={whispBoxStatus 331} rfStatWMACDLCRinfoSheds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats DLS RInfo Sheds" ::={whispBoxStatus 332} rfStatWPHYChokeCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Choke Count" ::={whispBoxStatus 333} rfStatInvalidVCRFeceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Invalid VC Received" ::={whispBoxStatus 334} bridgeCbEthSfpStatbin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats bin" ::={whispBoxStatus 3000} bridgeCbEthSfpStatbout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats bout" ::={whispBoxStatus 3001} bridgeCbEthSfpStatbtoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats btoss" ::={whispBoxStatus 3002} bridgeCbEthSfpStatbtosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats btosscap" ::={whispBoxStatus 3003} bridgeCbEthSfpStatuin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats uin" ::={whispBoxStatus 3004} bridgeCbEthSfpStatuout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats uout" ::={whispBoxStatus 3005} bridgeCbEthSfpStatutoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats utoss" ::={whispBoxStatus 3006} bridgeCbEthSfpStatutosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats utosscap" ::={whispBoxStatus 3007} bridgeCbEthSfpStatfloods OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Eth SFP Stats Floods (Multipoint AP only)" ::={whispBoxStatus 3010} boxVcDepth OBJECT-TYPE SYNTAX INTEGER { notAvailable(0)} MAX-ACCESS read-only STATUS current DESCRIPTION "The current VC Depth on this device. SM value is only valid when in session." ::={whispBoxStatus 3011} enableMACAddressFilter OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable (1) or Disable(0) MAC Access filtering." ::={whispMACAddressFilterConfig 1} defaultMACAddressFilterAction OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow (1) or Deny(0) unlisted MAC Addresses by default." ::={whispMACAddressFilterConfig 2} addModifyMACAddressFilterAction OBJECT-TYPE SYNTAX INTEGER { deny(0), allow(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow (1) or Deny (0) Access for MAC address." ::={whispMACAddressFilterConfig 3} addModifyMACAddressFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Add MAC address for address filters, MAC can be specified in any of the following formats aa:bb:cc:dd:ee:ff, aa-bb-cc-dd-ee-ff, aabbccddeeff. For allowing all MAC addresses of a particular OUI use aa:bb:cc:* or aa-bb-cc-* or aabbcc* format." ::={whispMACAddressFilterConfig 4} rmMACAddressFilter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Remove MAC address for address filters, MAC can be specified in any of the following formats aa:bb:cc:dd:ee:ff, aa-bb-cc-dd-ee-ff, aabbccddeeff. For removing OUI MAC use aa:bb:cc:* or aa-bb-cc-* or aabbcc* format." ::={whispMACAddressFilterConfig 5} whispMacAddressFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispMacAddressFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of MAC Address filters." ::= {whispBoxMACAddressFiltering 2} whispMacAddressFilterEntry OBJECT-TYPE SYNTAX WhispMacAddressFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of configured Mac Address filtering." INDEX {filterMacAddressEntry} ::= {whispMacAddressFilterTable 1} WhispMacAddressFilterEntry ::= SEQUENCE{ filterMacAddressEntry DisplayString, filterMacAddressAction DisplayString } filterMacAddressEntry OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Configured MAC Access filter" ::={whispMacAddressFilterEntry 1} filterMacAddressAction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Configured MAC Address filter action (allow/deny)" ::={whispMacAddressFilterEntry 2} colorCode OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "Color code." ::={whispBoxConfig 2} fullAccess OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Full access password." ::={whispBoxConfig 4} webAutoUpdate OBJECT-TYPE SYNTAX INTEGER UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Web page auto update in seconds. 0 means disabled." ::={whispBoxConfig 5} pass1Status OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Password 1(display only) status." ::={whispBoxConfig 6} pass2Status OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Password 2(full access) status." ::={whispBoxConfig 7} bridgeEntryTimeout OBJECT-TYPE SYNTAX INTEGER (25..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge table time out Range : 25 -- 1440 Minutes." ::={whispBoxConfig 8} snmpMibPerm OBJECT-TYPE SYNTAX INTEGER { readWrite(0), readOnly(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Read/Write permission for MIB groups." ::={whispBoxConfig 9} bhTimingMode OBJECT-TYPE SYNTAX INTEGER { timingMaster(1), timeingSlave(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to switch between Timing Master and Timing Slave. For Backhaul units only." ::={whispBoxConfig 10} powerControl OBJECT-TYPE SYNTAX INTEGER { low(0), normal(1)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Power control. FSK Only." ::={whispBoxConfig 12} antennaGain OBJECT-TYPE SYNTAX INTEGER UNITS "dBi" MAX-ACCESS read-write STATUS current DESCRIPTION "External Antenna Gain. For radios that uses an external antenna or the DFS feature. Not applicable to PMP 450m." ::={whispBoxConfig 14} eirp OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit EIRP of radio. PMP 450m only." ::={whispBoxConfig 15} dynamicLearning OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable VLAN dynamic learning." ::={whispBoxConfig 16} managementVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Management VLAN VID." ::={whispBoxConfig 17} agingTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Aging timeout." ::={whispBoxConfig 18} frameType OBJECT-TYPE SYNTAX INTEGER { allframes(0), taggedonly(1), untaggedonly(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow only tagged frame." ::={whispBoxConfig 19} addVlanMember OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Write-Only OID,Add VLAN number which needs to be added." ::={whispBoxConfig 20} removeVlanMember OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Write-only OID,Enter VLAN ID which needs to deleted. If Vlan doesnot exist an error will be returned." ::={whispBoxConfig 21} transmitterOP OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitter output power. This is not available on OFDM SMs. Not applicable for PMP 450m. See EIRP OID. Not applicable for 450v, see carrierTxPower." ::={whispBoxConfig 23} bridgeEnable OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Disable or enable bridging functionality for a BH unit." ::={whispBoxConfig 24} fecEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Disable or enable FEC error correction functionality for multipoint units. This OID has no effect since 14.0 and is deprecated." ::={whispBoxConfig 25} commStringRWrite OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Read/Write Community string. This is a write-only OID." ::={whispBoxConfig 36} subnetMask OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 1." ::={whispBoxConfig 37} mngtIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 1." ::={whispBoxConfig 38} allowVIDAccess OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow or disallow local SM management VID access." ::={whispBoxConfig 39} setDefaultPlug OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "If enabled parameters are set to Factory Defaults upon default plug mode detection." ::={whispBoxConfig 40} gpsInput OBJECT-TYPE SYNTAX INTEGER { generateSyncSignal(0), syncToReceivedSignalTimingPort(1), syncToReceivedSignalPowerPort(2), syncToiGPS(3), autoSync(4), autoSyncFreeRun(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Values 1, 2, 3 have been deprecated. (0) Generate AP sync signal. (1) Deprecated. Sync AP to received signal (Timing Port (UGPS/cnPulse)). It will set AutoSync. (2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run. (3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run. (4) AutoSync. (5) AutoSync plus Free Run." ::={whispBoxConfig 42} ism OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable ISM on 5.7GHz frequency band radios." ::={whispBoxConfig 43} userName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User name.To create read-only user set userMode OID first. First set userChangePassword OID for user must change password. Maximum of 4 users can exist in system." ::={whispBoxConfig 45} userPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User password.To create read-only user set userMode OID first. Set userChangePassword OID to make user change password at first login.." ::={whispBoxConfig 46} userAccessLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "User access level.To create read-only user set userMode OID first. Set userChangePassword OID to make user change password at first login. 1=TECH 2=INSTALL 3=ADMIN" ::={whispBoxConfig 47} deleteUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User name to remove." ::={whispBoxConfig 48} lanDhcpState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable LAN Interface DHCP feature." ::={whispBoxConfig 50} sessionTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Timer for Telnet, Web and FTP sessions." ::={whispBoxConfig 51} vlanMemberSource OBJECT-TYPE SYNTAX INTEGER { configured(0), active(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specified the VLAN member source to display. 0=configured, 1=active configuration. Note that this OID is internal to SNMP and is not available at the Web Interface." ::={whispBoxConfig 52} addCustomFreqList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Add Custom Frequencies. The frequencies can be in a variety of units up to kHz. Frequencies can be added in a list separated by commas. Example: 3550, 356000, 3450001. A get will return the current custom frequency list. Max string length entered cannot exceed 128 character. Note if there is not enough room for all the frequencies none will be added. Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz." ::={whispBoxConfig 53} removeCustomFreqList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Remove Custom Frequencies. The frequencies can be in a variety of units up to kHz. Frequencies can be removed in a list separated by commas. Example: 3550, 356000, 3450001. A get will return the current custom frequencies. Only valid for use on 3.5/3.6 GHz MIMO OFDM Radios, or 450i in 4.9 GHz." ::={whispBoxConfig 54} changeUsrPwd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Allow to change the password of a given user of a given user. Usage: userName,password." ::={whispBoxConfig 56} -- The following definitions deal with the allowed SNMP IP & subnet masks mngtIP2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 2." ::={whispBoxConfig 57} subnetMask2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 2." ::={whispBoxConfig 58} mngtIP3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 3." ::={whispBoxConfig 59} subnetMask3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 3." ::={whispBoxConfig 60} mngtIP4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 4." ::={whispBoxConfig 61} subnetMask4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 4." ::={whispBoxConfig 62} mngtIP5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 5." ::={whispBoxConfig 63} subnetMask5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 5." ::={whispBoxConfig 64} mngtIP6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 6." ::={whispBoxConfig 65} subnetMask6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 6." ::={whispBoxConfig 66} mngtIP7 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 7." ::={whispBoxConfig 67} subnetMask7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 7." ::={whispBoxConfig 68} mngtIP8 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 8." ::={whispBoxConfig 69} subnetMask8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 8." ::={whispBoxConfig 70} mngtIP9 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 9." ::={whispBoxConfig 71} subnetMask9 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 9." ::={whispBoxConfig 72} mngtIP10 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 10." ::={whispBoxConfig 73} subnetMask10 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 10." ::={whispBoxConfig 74} bhvlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable VLAN for Backhaul Master/Slave." ::={whispBoxConfig 75} lldpBroadcastEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable Broadcast of LLDP message, if disabled LLDP uses multicast" ::={whispBoxConfig 76} regionCode OBJECT-TYPE SYNTAX INTEGER { none(0), australia(6), brazil(5), canada(3), india(8), indonesia(10), ireland(11), russia(7), spain(9), us(2), other(1), europe(4)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set Region Code for the Unit. Used the individual region[Region] OIDs instead." ::={whispBoxConfig 77} russiaRegion OBJECT-TYPE SYNTAX INTEGER { category1(1), category2(2), category3(3), category4(4)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now." ::={whispBoxConfig 78} commStringROnly OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set Read Only commnunity string." ::={whispBoxConfig 79} ethernetLinkSpeed OBJECT-TYPE SYNTAX INTEGER { forced10H(1), forced10F(2), forced100H(4), forced100F(8), auto10F-10H(3), auto100H-10H(5), auto100H-10F-10H(7), auto100F-100H(12), auto100F-100H-10H(13), auto100F-100H-10F-10H(15), auto1000F-100F-100H-10F-10H(63)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds." ::={whispBoxConfig 80} cyclicPrefix OBJECT-TYPE SYNTAX INTEGER { one-quarter(0), one-eighth(1), one-sixteenth(2), one-quarter-one-eighth(3), one-quarter-one-sixteenth(4), one-eighth-one-sixteenth(5), one-quarter-one-eighth-one-sixteenth(6)} MAX-ACCESS read-write STATUS current DESCRIPTION "Cyclic Prefix value, for OFDM Radios only. Deprecated for MIMO SMs. For PMP 430 SMs, this value is only used while in PMP 430 mode (1/16 is forced in PMP 450 mode)." ::={whispBoxConfig 81} numberCustomFreq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of custom frequencies added. There is a maximum of 100. For use on 3.5 GHz OFDM Radios only." ::={whispBoxConfig 82} channelBandwidth OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current channel bandwidth in MHz. For use on OFDM Radios only. Obsoleted for MIMO SMs." ::={whispBoxConfig 83} setDefaults OBJECT-TYPE SYNTAX INTEGER { noChangeOrUndoFactoryDefaults(0), setToFactoryDefaults(1), factoryDefaultsSet-AwaitingReboot(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0 will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting. Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID prior to reboot. As a security measure, this OID is only valid when the radio was booted in default plug mode. If the radio is not currently in default plug mode, then attempting to set this OID will fail." ::={whispBoxConfig 84} radioRateAdapt OBJECT-TYPE SYNTAX INTEGER { onex(0), twox(1), threex(2), fourx(3), fivex(6), sixx(4), sevenx(7), eightx(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Downlink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdaptUL for setting uplink rate adapt." ::={whispBoxConfig 85} siteInfoViewable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable non login users the ability to view Site Information" ::={whispBoxConfig 86} largeVCQ OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed." ::={whispBoxConfig 87} latitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The latitude setting of this unit in decimal degrees." ::={whispBoxConfig 88} longitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The longitude setting of this unit in decimal degrees." ::={whispBoxConfig 89} height OBJECT-TYPE SYNTAX INTEGER (-2147483647..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The height setting of this unit in meters." ::={whispBoxConfig 90} bandwidth OBJECT-TYPE SYNTAX INTEGER { bandwidth5mhz(1), bandwidth7mhz(2), bandwidth10mhz(3), bandwidth15mhz(4), bandwidth20mhz(5), bandwidth30mhz(6), bandwidth40mhz(7)} MAX-ACCESS read-write STATUS current DESCRIPTION "Radio bandwidth setting. Obsoleted for MIMO SMs. Instead for MIMO SMs use OID bandwidthScan. As of Release 16.1, reboot is not required to change, except on PMP 450m." ::={whispBoxConfig 91} portVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Backhaul Port VID (PVID)." ::={whispBoxConfig 93} radioRateAdaptUL OBJECT-TYPE SYNTAX INTEGER { onex(0), twox(1), threex(2), fourx(3), fivex(6), sixx(4), sevenx(7), eightx(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Uplink Maximum Modulation Rate 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, and MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) Use radioRateAdapt for setting downlink rate adapt." ::={whispBoxConfig 94} providerVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Provider VID for QinQ VLAN." ::={whispBoxConfig 95} mac1VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 1 in MAC Address VID Mapping Table." ::={whispBoxConfig 96} mac1VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 1 in MAC Address VID Mapping Table." ::={whispBoxConfig 97} mac2VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 2 in MAC Address VID Mapping Table." ::={whispBoxConfig 98} mac2VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 2 in MAC Address VID Mapping Table." ::={whispBoxConfig 99} mac3VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 3 in MAC Address VID Mapping Table." ::={whispBoxConfig 100} mac3VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 3 in MAC Address VID Mapping Table." ::={whispBoxConfig 101} mac4VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 4 in MAC Address VID Mapping Table." ::={whispBoxConfig 102} mac4VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 4 in MAC Address VID Mapping Table." ::={whispBoxConfig 103} mac5VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 5 in MAC Address VID Mapping Table." ::={whispBoxConfig 104} mac5VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 5 in MAC Address VID Mapping Table." ::={whispBoxConfig 105} mac6VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 6 in MAC Address VID Mapping Table." ::={whispBoxConfig 106} mac6VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 6 in MAC Address VID Mapping Table." ::={whispBoxConfig 107} mac7VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 7 in MAC Address VID Mapping Table." ::={whispBoxConfig 108} mac7VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 7 in MAC Address VID Mapping Table." ::={whispBoxConfig 109} mac8VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 8 in MAC Address VID Mapping Table." ::={whispBoxConfig 110} mac8VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 8 in MAC Address VID Mapping Table." ::={whispBoxConfig 111} mac9VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 9 in MAC Address VID Mapping Table." ::={whispBoxConfig 112} mac9VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 9 in MAC Address VID Mapping Table." ::={whispBoxConfig 113} mac10VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 10 in MAC Address VID Mapping Table." ::={whispBoxConfig 114} mac10VIDMapVid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 10 in MAC Address VID Mapping Table." ::={whispBoxConfig 115} vlanPortType OBJECT-TYPE SYNTAX INTEGER { q(0), qinq(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN Port Type for VLAN interface. Default is Q." ::={whispBoxConfig 116} vlanAcceptQinQFrames OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP." ::={whispBoxConfig 117} whispWebUserAccessMode OBJECT-TYPE SYNTAX INTEGER { local(0), remote(1), remotethenlocal(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable selects if web page users for the radio should be authenticated locally or via a centralised remote Radius server" ::={whispBoxConfig 118} usrAccountEnableAccounting OBJECT-TYPE SYNTAX INTEGER { disable(0), deviceAccess(1), dataUsage(2), all(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select the level of accounting information to be reported to the server" ::={whispBoxConfig 119} allowRejectThenLocal OBJECT-TYPE SYNTAX INTEGER { doNotAllowLocalAuthifAAAReject(0), allowLocalAuthIfAAAReject(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Control for allowing local authenication if the AAA remote server" ::={whispBoxConfig 120} snrCalculation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance." ::={whispBoxConfig 121} priorityPrecedence OBJECT-TYPE SYNTAX INTEGER { eight021pThenDiffServ(0), diffservThenEight021p(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions." ::={whispBoxConfig 122} installationColorCode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled in order to facilitate remote provisioning." ::={whispBoxConfig 123} apSmMode OBJECT-TYPE SYNTAX INTEGER { sm(1), ap(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP. Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP." ::={whispBoxConfig 124} pppoeFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set PPPoE packet filter when NAT is disabled." ::={whispBoxConfig 125} smbFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set SMB packet filter when NAT is disabled." ::={whispBoxConfig 126} snmpFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set SNMP packet filter when NAT is disabled." ::={whispBoxConfig 127} userP1Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 1 packet filter." ::={whispBoxConfig 128} userP2Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 2 packet filter." ::={whispBoxConfig 129} userP3Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 3 packet filter." ::={whispBoxConfig 130} allOtherIpFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all other IPv4 packet filter when NAT is disabled." ::={whispBoxConfig 131} allIpv4Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all IPv4 packet filter when NAT is disabled. Enabling this will automatically enable all of the known IPv4 filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All Other IPv4)." ::={whispBoxConfig 132} arpFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set ARP packet filter when NAT is disabled." ::={whispBoxConfig 133} allOthersFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all other packet filter when NAT is disabled." ::={whispBoxConfig 134} -- User Defined Port Filtering Configuration userDefinedPort1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An integer value of number one user defined port. Range:0-65535" ::={whispBoxConfig 135} port1TCPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 1 TCP traffic filter." ::={whispBoxConfig 136} port1UDPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 1 UDP traffic filter." ::={whispBoxConfig 137} userDefinedPort2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An integer value of number two user defined port. Range:0-65535" ::={whispBoxConfig 138} port2TCPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 2 TCP traffic filter." ::={whispBoxConfig 139} port2UDPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 2 UDP traffic filter." ::={whispBoxConfig 140} userDefinedPort3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An integer value of number three user defined port. Range:0-65535" ::={whispBoxConfig 141} port3TCPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 3 TCP traffic filter." ::={whispBoxConfig 142} port3UDPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 3 UDP traffic filter." ::={whispBoxConfig 143} bootpcFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set bootp client sourced packets filter when NAT is disabled." ::={whispBoxConfig 144} bootpsFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set bootp server sourced packets filter when NAT is disabled." ::={whispBoxConfig 145} ip4MultFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set IPv4 MultiCast packets filter when NAT is disabled." ::={whispBoxConfig 146} packetFilterDirection OBJECT-TYPE SYNTAX INTEGER { upstream(1), downstream(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set packet filter direction. Upstream is default." ::={whispBoxConfig 147} encryptionConfig OBJECT-TYPE SYNTAX INTEGER { des(0), aes(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set the encryption algorithm to use. Applicable only on radios that support encryption configuration. Prior to 20.3, cannot be set on AP if encryption is disabled (enabled via encryptionMode OID). Only able to set to DES on pre 15.2 radios. Post 15.2, only AES is supported. Not applicable to SM/BHS running 15.2 or newer." ::={whispBoxConfig 148} pppoeCtlPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Prioritization of PPPoE Control packets." ::={whispBoxConfig 149} ftpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for FTP. Default is 21." ::={whispBoxConfig 150} httpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for HTTP. Default is 80." ::={whispBoxConfig 151} httpsPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for HTTPs. Default is 443." ::={whispBoxConfig 152} snmpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for SNMP. Default is 161." ::={whispBoxConfig 153} snmpTrapPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for SNMP Traps. Default is 162." ::={whispBoxConfig 154} webAccess OBJECT-TYPE SYNTAX INTEGER { http(0), https(1), http-and-https(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable determines if only HTTP or HTTPs connection are allowed. 0: HTTP Only 1: HTTPs Only 2: HTTP and HTTPs Both" ::={whispBoxConfig 155} syslogDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select whether to append the configured management domain name to the Syslog server name. For example, if dnsMgmtDomainName is set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'." ::={whispBoxConfig 156} syslogServerAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name" ::={whispBoxConfig 157} syslogServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Listening port on the Syslog server. Default is 514." ::={whispBoxConfig 158} syslogMinLevel OBJECT-TYPE SYNTAX INTEGER { fatal(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)} MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted." ::={whispBoxConfig 159} allIpv6Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all IPv6 packet filter when NAT is disabled. Enabling this will automatically enable all of the known IPv6 filters (SMB, SNMP, Bootp, IPv6 Mcast, User Defined Ports, and All Other IPv6)." ::={whispBoxConfig 160} ipv6smbFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set IPv6 SMB packet filter when NAT is disabled." ::={whispBoxConfig 161} ipv6snmpFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set IPv6 SNMP packet filter when NAT is disabled." ::={whispBoxConfig 162} ipv6bootpcFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set IPv6 bootp client sourced packets filter when NAT is disabled." ::={whispBoxConfig 163} ipv6bootpsFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set IPv6 bootp server sourced packets filter when NAT is disabled." ::={whispBoxConfig 164} ipv6MultFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set IPv6 MultiCast packets filter when NAT is disabled." ::={whispBoxConfig 165} allOtherIpv6Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all other IPv6 packet filter when NAT is disabled." ::={whispBoxConfig 166} snmpStatus OBJECT-TYPE SYNTAX INTEGER { snmpDisable(0), snmpv2only(1), snmpv3only(2), snmpv2-and-snmpv3(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable determines SNMP operation mode. 0: Disable SNMP 1: Enable SNMPv2c only (default) 2: Enable SNMPv3 only 3: Enable SNMPv2c and SNMPv3" ::={whispBoxConfig 167} telnetStatus OBJECT-TYPE SYNTAX INTEGER { disabletelnet(0), enabletelnet(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable determines if Telnet to enabled or not. 0: Disable Telnet 1: Enable Telnet" ::={whispBoxConfig 168} ftpStatus OBJECT-TYPE SYNTAX INTEGER { disableftp(0), enableftp(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable determines if FTP to enabled or not. 0: Disable FTP 1: Enable FTP" ::={whispBoxConfig 169} tftpStatus OBJECT-TYPE SYNTAX INTEGER { disabletftp(0), enabletftp(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable determines if TFTP is enabled or not. 0: Disable TFTP 1: Enable TFTP" ::={whispBoxConfig 170} userMode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "User Mode 1=Read-Only 0=Read-Write(default)." ::={whispBoxConfig 171} tcpAckPriority OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Prioritize TCP ACK that are 64 bytes or less." ::={whispBoxConfig 172} codePointSelect OBJECT-TYPE SYNTAX INTEGER { cp1(1), cp2(2), cp3(3), cp4(4), cp5(5), cp6(6), cp7(7), cp9(9), cp10(10), cp11(11), cp12(12), cp13(13), cp14(14), cp15(15), cp17(17), cp18(18), cp19(19), cp20(20), cp21(21), cp22(22), cp23(23), cp25(25), cp26(26), cp27(27), cp28(28), cp29(29), cp30(30), cp31(31), cp33(33), cp34(34), cp35(35), cp36(36), cp37(37), cp38(38), cp39(39), cp41(41), cp42(42), cp43(43), cp44(44), cp45(45), cp46(46), cp47(47), cp49(49), cp50(50), cp51(51), cp52(52), cp53(53), cp54(54), cp55(55), cp57(57), cp58(58), cp59(59), cp60(60), cp61(61), cp62(62), cp63(63)} MAX-ACCESS read-write STATUS current DESCRIPTION "Codepoint Select.This represents the CodePoint Selection to be modified via Priority Select" ::={whispBoxConfig 173} prioritySelect OBJECT-TYPE SYNTAX INTEGER { p0(0), p1(1), p2(2), p3(3), p4(4), p5(5), p6(6), p7(7)} MAX-ACCESS read-write STATUS current DESCRIPTION "Priority Select.The priority setting input for the CodePoint selected in CodePoint Select." ::={whispBoxConfig 174} auxPortEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable(1) or Disable(0) aux ethernet port on 450i or 450m radio Enabling the Aux Ethernet port will disrupt the Aux Power to UGPS" ::={whispBoxConfig 175} poeAuxEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable(1) or Disable(0) Aux Ethernet port PoE on 450i or 450m radio" ::={whispBoxConfig 176} whispUsrAuth OBJECT-TYPE SYNTAX INTEGER { md5(0), peap-mschapv2(1), pap(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select method for User Authentication." ::={whispBoxConfig 177} ipv6State OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable IPv6 protocol for management on radio. For SMs, cannot be enabled with NAT enabled. To enable IPv6, NAT must first be disabled." ::={whispBoxConfig 178} dhcpv6State OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable stateful DHCPv6." ::={whispBoxConfig 179} lan1Dhcpv6Release OBJECT-TYPE SYNTAX INTEGER { releaseIPv6(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will release LAN1's IPv6 address and send a DHCPv6 Release Message to the DHCPv6 server. Applicable only when NAT is disabled." ::={whispBoxConfig 180} lan1Dhcpv6Renew OBJECT-TYPE SYNTAX INTEGER { renewIPv6(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will renew LAN1's lease time for its current IPv6 address. Applicable only when NAT is disabled." ::={whispBoxConfig 181} lan1DhcpRelease OBJECT-TYPE SYNTAX INTEGER { releaseIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will release LAN1's IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is disabled." ::={whispBoxConfig 201} lan1DhcpRenew OBJECT-TYPE SYNTAX INTEGER { renewIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will renew LAN1's lease time for its current IP address. Applicable only when NAT is disabled." ::={whispBoxConfig 202} lan3DhcpRelease OBJECT-TYPE SYNTAX INTEGER { releaseIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will release LAN3's (RF Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled." ::={whispBoxConfig 203} lan3DhcpRenew OBJECT-TYPE SYNTAX INTEGER { renewIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will renew LAN3's (RF Public) lease time for its current IP address. Applicable only when NAT is enabled." ::={whispBoxConfig 204} natDhcpRelease OBJECT-TYPE SYNTAX INTEGER { releaseIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will release WAN's (NAT Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled." ::={whispBoxConfig 205} natDhcpRenew OBJECT-TYPE SYNTAX INTEGER { renewIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will renew WAN's (NAT Public) lease time for its current IP address. Applicable only when NAT is enabled." ::={whispBoxConfig 206} region OBJECT-TYPE SYNTAX INTEGER { none(0), otherRegulatory(1), asia(6), europe(3), northAmerica(2), oceania (5), southAmerica(4), africa(7)} MAX-ACCESS read-only STATUS current DESCRIPTION "Set Region Code for the Unit." ::={whispBoxConfig 207} regionAsia OBJECT-TYPE SYNTAX INTEGER { none(0), india(2), indonesia(3), russiacategory1(4), russiacategory2(5), russiacategory3(6), russiacategory4(7), vietnam(8), malaysia(10), pakistan(11)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Asia." ::={whispBoxConfig 208} regionEurope OBJECT-TYPE SYNTAX INTEGER { none(0), spain(2), ireland(3), denmark(4), finland(5), germany(6), greece(7), iceland(8), liechtenstein(9), norway(10), portugal(11), switzerland(12), serbia(13), unitedkingdom(14), france(15), italy(16), austria(17), czechrepublic(18), bulgaria(19), turkey(20), netherlands(21), latvia(22), croatia(23), luxembourg(24), cyprus(25), poland(26), hungary(27), other(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Europe. Other is only available for units with EU Region Lock." ::={whispBoxConfig 209} regionNorthAmerica OBJECT-TYPE SYNTAX INTEGER { none(0), canada(3), unitedStates(2), mexico(4), puertoRico(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for North America." ::={whispBoxConfig 210} regionOceania OBJECT-TYPE SYNTAX INTEGER { none(0), australia(2), newZealand(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Oceania." ::={whispBoxConfig 211} regionSouthAmerica OBJECT-TYPE SYNTAX INTEGER { none(0), brazil(2), ecuador(3), colombia(4), venezuela(5), panama(6)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for South America." ::={whispBoxConfig 212} regionOtherRegulatory OBJECT-TYPE SYNTAX INTEGER { none(0), other(1), fcc(2), fccNoAFC(5), etsi(3), etsilbt(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Regulatory setting for governing regulatory body." ::={whispBoxConfig 213} interleave OBJECT-TYPE SYNTAX INTEGER { default(0), disabled(1), enabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Engineering use only." ::={whispBoxConfig 214} receiveQualityDebug OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable receive quality calculations for every packet. Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH. Default to disabled for all radios. Only applicable to GenII OFDM products and up." ::={whispBoxConfig 215} apType OBJECT-TYPE SYNTAX INTEGER { standard(0), remote(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "In standard mode, all possible sync sources will be made availble and usedfor autoSync operation. In remote mode, sync over power port will not be available as a sync source. Remote Device mode is where the AP or BHM timing port is connected to an SM or BHS timing port via a sync cable. In this mode, GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other sync over power device is in use, then select standard mode. On 450b PTP BHM, this mode cannot be enabled while Sync Aux Port Config is set to Output or Alignment Tone, because these signals share a physical pin with the sync input signal. On MicroPoP, this feature does not have hardware support." ::={whispBoxConfig 216} regionAfrica OBJECT-TYPE SYNTAX INTEGER { none(0), algeria(2), nigeria(3), egypt(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Africa." ::={whispBoxConfig 217} addCustomFreqMimo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency input ie) 3700.50. Deprecated, please use 'addCustomFreqList'." ::={whispBoxConfig 218} removeCustomFreqMimo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Frequency input ie) 3700.50. Deprecated, please use 'removeCustomFreqList'." ::={whispBoxConfig 219} timedSpectrumAnalysisDurationBox OBJECT-TYPE SYNTAX INTEGER (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds. Note that this represents the minimum scan duration. The current scan will still be allowed to complete when this duration is elapsed, so actual scan time could be longer." ::={whispBoxConfig 220} spectrumAnalysisActionBox OBJECT-TYPE SYNTAX INTEGER { stopSpectrumAnalysis(0), startTimedSpectrumAnalysis(1), startContinuousSpectrumAnalysis(2), idleNoSpectrumAnalysis(3), idleCompleteSpectrumAnalysis(4), inProgressTimedSpectrumAnalysis(5), inProgressContinuousSpectrumAnalysis(6), notReady(7), setToFullScan(8)} MAX-ACCESS read-write STATUS current DESCRIPTION "Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis Note: AP/BHM will run Spectrum Analysis for the sector. (2) - Start Continuous Spectrum Analysis (3) - Idle, no Spectrum Analysis results. (4) - Idle, Spectrum Analysis results available. (5) - Timed or Remote Spectrum Analysis in progress. (6) - Continuous Spectrum Analysis in progress. Note: Continuous mode has a max of 24 hours. (7) - Spectrum Analyzer not ready. (8) - Set minimum and maximum frequencies to full scan." ::={whispBoxConfig 221} mac1VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 1 in MAC Address VID Mapping Table." ::={whispBoxConfig 222} mac1VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 1 in MAC Address VID Mapping Table." ::={whispBoxConfig 223} mac2VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 2 in MAC Address VID Mapping Table." ::={whispBoxConfig 224} mac2VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 2 in MAC Address VID Mapping Table." ::={whispBoxConfig 225} mac3VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 3 in MAC Address VID Mapping Table." ::={whispBoxConfig 226} mac3VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 3 in MAC Address VID Mapping Table." ::={whispBoxConfig 227} mac4VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 4 in MAC Address VID Mapping Table." ::={whispBoxConfig 228} mac4VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 4 in MAC Address VID Mapping Table." ::={whispBoxConfig 229} mac5VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 5 in MAC Address VID Mapping Table." ::={whispBoxConfig 230} mac5VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 5 in MAC Address VID Mapping Table." ::={whispBoxConfig 231} mac6VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 6 in MAC Address VID Mapping Table." ::={whispBoxConfig 232} mac6VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 6 in MAC Address VID Mapping Table." ::={whispBoxConfig 233} mac7VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 7 in MAC Address VID Mapping Table." ::={whispBoxConfig 234} mac7VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 7 in MAC Address VID Mapping Table." ::={whispBoxConfig 235} mac8VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 8 in MAC Address VID Mapping Table." ::={whispBoxConfig 236} mac8VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 8 in MAC Address VID Mapping Table." ::={whispBoxConfig 237} mac9VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 9 in MAC Address VID Mapping Table." ::={whispBoxConfig 238} mac9VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 9 in MAC Address VID Mapping Table." ::={whispBoxConfig 239} mac10VIDMapPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority for Entry 10 in MAC Address VID Mapping Table." ::={whispBoxConfig 240} mac10VIDMapPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VID priority Mode for Entry 10 in MAC Address VID Mapping Table." ::={whispBoxConfig 241} managementVIDPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "management VID VID VLAN Priority." ::={whispBoxConfig 242} managementVIDPriorityMode OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "management VID VLAN Priority Mode." ::={whispBoxConfig 243} remarkSrcVID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Source VID to apply remarking on." ::={whispBoxConfig 244} addRemarkVID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Add VLAN ID re-marking entry." ::={whispBoxConfig 245} addRemarkPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Add 802.1p re-mark entry." ::={whispBoxConfig 246} deleteRemarkVID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Remove the VID re-marking for this source VID." ::={whispBoxConfig 247} deleteRemarkPriority OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Remove the priority re-marking for this source VID." ::={whispBoxConfig 248} mimoRateAdaptAlgorithm OBJECT-TYPE SYNTAX INTEGER { mimobmimoa(0), mimobonly(1), mimoaonly(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Control MIMO Rate Adapt Algorithm 0 = MIMO-A/B This chooses MIMO-A or MIMO-B dynamically to maximize throughput 1 = MIMO-B only 2 = MIMO-A only" ::={whispBoxConfig 249} controlMessages OBJECT-TYPE SYNTAX INTEGER { siso(1), mimoa(0)} MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Control Messages (Beacon/Scheduling Map/Acknowledgements/Broadcast) 0 = MIMO-A 1 = SISO MIMO-A Control Messages is the recommended and default setting. However, SISO Control Messages can be helpful in talking to subscribers on releases previous to 13.2, which operated in this mode. Not applicable to PMP 450m. As of 16.1, PMP 430 SMs are no longer supported on the 450 platform. On that release and forward, this OID is read-only and returns MIMO-A." ::={whispBoxConfig 250} enableSecurityBanner OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Shows Security Banner at the time of login" ::={whispBoxConfig 251} vcDepthDownlink OBJECT-TYPE SYNTAX INTEGER { default(0), default128(1), default256(2), default512(3), sixty-four(64), one-two-eight(128), two-five-six(256), five-one-two(512)} MAX-ACCESS read-write STATUS current DESCRIPTION "VC Depth in the downlink Not currently supported with 450m." ::={whispBoxConfig 252} textSecurityBanner OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Security Banner to be dispalyed on login page. Length should be maximum 1200 characters.Configuration from web UI can enter upto 1499 characters. Only ASCII characters(0-9a-zA-Z,CR,LF) supported." ::={whispBoxConfig 253} acceptSecurityBanner OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: User must accept and acknowledge security banner before login. 0: Accepting security banner is not mandatory and user can login without it." ::={whispBoxConfig 254} poeT2Classification OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "When disabled, the radio will ignore the 802.3at Type 2 classification. When enabled, if 802.3at Type 2 PoE is not present, the board will start and log the problem but the transmitter and PoE out will not be enabled due to the low input power. This is only available on the 450i." ::={whispBoxConfig 255} simulatedAirDelay OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Simulated Air Delay. Engineering use only." ::={whispBoxConfig 256} cnMaestroEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable Remote management using cnMaestro." ::={whispBoxConfig 257} cnMaestroUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "cnMaestro Server URL." ::={whispBoxConfig 258} camID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Cambium Id for cnMaestro onboarding." ::={whispBoxConfig 259} camOnboardKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Onboarding key for cnMaestro onboarding." ::={whispBoxConfig 260} atexHazlocPowerLimit OBJECT-TYPE SYNTAX INTEGER { gasGroupA(0), gasGroupB(1), gasGroupC(2), gasGroupD(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "If radio is keyed for ATEX/HazLoc operation, these settings can be used to limit maximum power output, per Gas Group specs." ::={whispBoxConfig 261} nearFieldRange OBJECT-TYPE SYNTAX INTEGER (6..3000) UNITS "feet" MAX-ACCESS read-write STATUS current DESCRIPTION "Range in feet for near field operation. This is applied only when nearFieldOperation is set to enable(1) and eirp is 22dBm or below or when Engineering keyed. The maximum range of 3000ft applies negligible correction. PMP 450m only." ::={whispBoxConfig 262} nearFieldOperation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enables operation in the near field. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. PMP 450m only." ::={whispBoxConfig 263} defaultIPAccessEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable(1) or Disable(0) Default alternative LAN1 IP address" ::={whispBoxConfig 264} pingWdogEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "enable(1) or disable(0) ping watchdog." ::={whispBoxConfig 265} pingWdogIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 address to ping in dotted decimal notation." ::={whispBoxConfig 266} pingWdogInterval OBJECT-TYPE SYNTAX INTEGER (30..86400) UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Intervals in seconds at which ping should be initiated." ::={whispBoxConfig 267} pingWdogRbtCnt OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Ping Failures count at which reboot should be initiated." ::={whispBoxConfig 268} disableAes128 OBJECT-TYPE SYNTAX INTEGER { enableaes128(0), disableaes128(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Disables the availability of AES-128 bit authentication and encryption 0 - AES-128 algorithm is available. 1 - AES-128 algorithm is disabled. This value becomes read-only when a reboot is required. Pending reboots should be completed before making changes to this parameter. Caution 1: Setting this attribute may result in previously working links no longer forming. Caution 2: A change of value to this attribute has immediate effect - no reboot required." ::={whispBoxConfig 269} forceReassessment OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Forces channel reassessment for all registered SMs. This is effective only when an EIRP of 22 dBm or lower is selected or when Engineering keyed. MU-MIMO only." ::={whispBoxConfig 275} enable8023linkBox OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable 802.3 link." ::={whispBoxConfig 276} ethernetBounceTimeout OBJECT-TYPE SYNTAX INTEGER (0..60) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet Bounce time out Range : 0 -- 60 Minutes, zero for disabling the feature." ::={whispBoxConfig 277} ethernetPortSelection OBJECT-TYPE SYNTAX INTEGER { mainPort(0), sfpPort(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set/Get the Ethernet port used to bridge traffic. PMP 450m only." ::={whispBoxConfig 278} ethernetLinkSpeedSfp OBJECT-TYPE SYNTAX INTEGER { auto1000FX(32), auto1000F-100F(40), forced1000FX(64), auto2500F-1000F-100F(168)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set/Get Ethernet link speed and duplex settings of the SFP port. PMP 450m only. Please note that the Radio Recovery Console only supports auto1000F for the SFP." ::={whispBoxConfig 279} idleTrafficEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Idle Traffic Enable Config 0: Disabled 1: Enabled Engineering use only." ::={whispBoxConfig 280} idleTrafficSize OBJECT-TYPE SYNTAX INTEGER (64..1518) MAX-ACCESS read-write STATUS current DESCRIPTION "Idle Traffic Packet Size Engineering use only." ::={whispBoxConfig 281} customSpecAnalyzerMinFreqSnmp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum custom frequency value in kHz." ::={whispBoxConfig 282} customSpecAnalyzerMaxFreqSnmp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum custom frequency value in kHz." ::={whispBoxConfig 283} minModRate OBJECT-TYPE SYNTAX INTEGER { onex(0), twox(1), threex(2), fourx(3), fivex(6), sixx(4), sevenx(7), eightx(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum Modulation Rate parameter 0: 1x (MIMO-A QPSK) 1: 2x (MIMO-A QPSK 16-QAM, MIMO-B QPSK) 2: 3x (MIMO-A 64-QAM, and MIMO-B 8-QAM) 3: 4x (MIMO-A 256-QAM, and MIMO-B 16-QAM) 4: 6x (MIMO-B 64-QAM) 5: 8x (MIMO-B 256-QAM) 6: 5x (MIMO-B 32-QAM) 7: 7x (MIMO-B 128-QAM) PTP 450 platform only. Enabling this will prevent the link from bridging traffic when the transmit modulation rate is below this level. This option can be used for redundant PTP links with spanning tree. When the rate drops below this minimum modulation rate, the Ethernet link will be disabled for half a second. This is to alert spanning tree protocols that the link is not up. Enabling this option will also add a small amount of continuous low priority traffic when the link is idle. This is done to ensure the modulation rate is current over the RF link. Use with caution." ::={whispBoxConfig 284} rateAdaptPerLuid OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling this (default) sets Rate Adapt per LUID mode. Disabling this sets Rate Adapt per VC mode. Engineering Key only." ::={whispBoxConfig 285} spectrumAnalysisOnBoot OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable Spectrum Analysis on boot up for one scan through the band. (0) - Disabled (1) - Enabled" ::={whispBoxConfig 286} qosGroupingLevel OBJECT-TYPE SYNTAX INTEGER { lowpriority(0), medpriority(1), highpriority(2), ultrapriority(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "PMP 450m only. 0 = Group Low Priority Data Channels 1 = Group Low and Medium Priority Data Channels 2 = Group Low, Medium and High Priority Data Channels 3 = Group All Data Channels" ::={whispBoxConfig 287} endPointMode OBJECT-TYPE SYNTAX INTEGER { multipoint(0), backhaul(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Endpoint mode: Point-To-Multipoint or Point-to-Point(Backhaul). 450i and 450b PTP keyed models only. This OID can switch a PTP into PMP SM mode (and vice versa) Reboot is required after this change. Setting to Factory Defaults, does not change this parameter." ::={whispBoxConfig 288} remoteDeviceType OBJECT-TYPE SYNTAX INTEGER { other(0), pmpptp100(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "If this radio is being used to give sync to a remote device, then this option must indicate what type that device is, PMP/PTP 100 or all other types. This is currently not implemented on 450m, APs, and BHMs. 1 = PMP/PTP 100 0 = Other" ::={whispBoxConfig 289} gpsOutputEn OBJECT-TYPE SYNTAX INTEGER { off(0), on(1), input(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Controls what the AUX port will be configured to do. On all AP/BHM's except for 450b and 450v, there are two options: 0(off) Sync Input (default value) or 1(on) Sync Output. On 450v AP, there are two options: 1(on) Sync Output or 2(input) Sync Input (default value). On 450b or 450v BHM, there are three options: 0(off) Alignment Tone (default value), 1(on) Sync Output, or 2(input) Sync Input. On 450b or 450v SM/BHS, there are three options: 0(off) Alignment Tone (default value), 1(on) Sync Output, or 2(input) GPS Data." ::={whispBoxConfig 290} vlanSM8021pSupport OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Support for 802.1p VLAN ID Zero." ::={whispBoxConfig 291} sshStatus OBJECT-TYPE SYNTAX INTEGER { disablessh(0), enablessh(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable determines if ssh server is enabled or not. 0: Disable SSH server 1: Enable SSH server" ::={whispBoxConfig 292} microPoPGPSSyncSearchMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set the GNSS search mode. This is a + separate string of possible names GPS, GLONASS, Galileo, and Beidou. For example, setting to GPS+GLONASS+Galileo will enable GPS GLONASS, and Galileo systems while GPS will only enable GPS system. Note that some of these may be rejected if they are not allowed due to regulatory reasons." ::={whispBoxConfig 293} lldpVlanTagging OBJECT-TYPE SYNTAX INTEGER { alwaysUntagged(0), followVlanMvidConfiguration(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configures LLDP to be always untagged or follow VLAN MVID Configuration." ::={whispBoxConfig 294} bpduFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set BPDU packets filter when NAT is disabled." ::={whispBoxConfig 295} ingressVIDBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Untagged ingress VID." ::={whispBoxConfig 296} ingressVIDPriorityBox OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "ingress VID VLAN Priority." ::={whispBoxConfig 297} ingressVIDPriorityModeBox OBJECT-TYPE SYNTAX INTEGER { promote-IP-priority(0), define-priority(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "ingress VID VLAN Priority Mode." ::={whispBoxConfig 298} nomadic OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This enables or disables nomadic mode, which allows SMs to move at a slow speed and maintain the session with the AP. Feature Key required to enable on AP. Needs to be enabled on both SM and AP to function. PMP only. Not currently supported on 450m." ::={whispBoxConfig 300} cnMaestroCertValidation OBJECT-TYPE SYNTAX INTEGER { cloud(1), cloud-On-Premises(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "cnMaestro server certficate validation. 1. Only cnMaestro cloud server certificate will be validated, this is the default setting. 2. Both cnMaestro cloud and On-Premises server certificates will be validated." ::={whispBoxConfig 304} fccStaFrequencies OBJECT-TYPE SYNTAX INTEGER { unsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Returns 1 if AP/BHM is allowed to run the FCC Special Temporary Authority UNII-3 Band Extension 5850 - 5895 MHz. Note: In order to access the FCC STA frequencies, the operator must have an STA license. Using these frequencies without an STA license is a violation of the FCC rules. Please contact support@cambiumnetworks.com for more information. Setting to a 1 will enable the STA frequencies, setting to a 0 will disable the STA frequencies. Only valid for 5 GHz FCC AP/BHM radios." ::={whispBoxConfig 305} csrfSetting OBJECT-TYPE SYNTAX INTEGER { default(0), disable(1), enable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: Default Cross-site Request Forgery(CSRF) protection (currently disabled, in future software version the default CSRF setting will be treated as enabled). 1: Disable Cross-site Request Forgery(CSRF) protection. 2: Enable Cross-site Request Forgery(CSRF) protection." ::={whispBoxConfig 306} horizontalUncertainty OBJECT-TYPE SYNTAX INTEGER (0..450) MAX-ACCESS read-write STATUS current DESCRIPTION "Horizontal distance between the GPS receiver antenna and the device in meters. This is required only if the radio detects an external GPS source." ::={whispBoxConfig 307} verticalUncertainty OBJECT-TYPE SYNTAX INTEGER (0..250) MAX-ACCESS read-write STATUS current DESCRIPTION "Vertical distance between the GPS receiver antenna and the device in meters. This is required only if the radio detects an external GPS source." ::={whispBoxConfig 308} afcOcspStapling OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enables OCSP Stapling while communicating with AFC system. Engineering use only." ::={whispBoxConfig 311} bridgeUpstreamInterface OBJECT-TYPE SYNTAX INTEGER { mainEthernet(260), auxEthernet(265), sfp(266), rf(257)} MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Upstream Interface. Devices seen incoming frmo this interface are not kept in the bridge. When the device cannot find an entry in the bridge, the device will forward the packet to this default interface. Default for PMP is Main Ethernet for AP and RF for SM. Default for PTP is RF for both sides. Options are Main Ethernet (260), Aux Ethernet (265), SFP+ (266), RF (257)." ::={whispBoxConfig 312} lldpAdminMode OBJECT-TYPE SYNTAX INTEGER { tx-rx(3), tx-only(1), rx-only(2), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configures LLDP to be on, transmit only, receive only, or disabled." ::={whispBoxConfig 313} lldpPassthrough OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enables bridging of LLDP packets" ::={whispBoxConfig 314} passwdMinimumLengthRule OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: No minimum password length validation. 1: Password must be at least 8 characters long." ::={whispBoxConfig 315} passwdCharacterTypes OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: No mandatory character validation for password. 1: Password must contain at least one lowercase letter, one uppercase letter, one digit and one special character." ::={whispBoxConfig 316} passwdUsernameInclusion OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: Enable the password can contain the username. 1: Disable the password must not contain the username." ::={whispBoxConfig 317} historyRule OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: Disable the password history validation. 1: Password cannot be one of the last 3 used passwords." ::={whispBoxConfig 318} passwdMustChange OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: The user need not change the password immediately. 1: Force the user to change password if the rules are not fulfilled." ::={whispBoxConfig 319} remoteUserLoginRules OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: No validation on remote login user password upon login. 1: validate remote login user password upon login." ::={whispBoxConfig 320} userChangePassword OBJECT-TYPE SYNTAX INTEGER { noNeedTochangePassword(0), mustChangePassword(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "1 = User must change password at first login. 0 = (default) no need to change the password." ::={whispBoxConfig 321} vcDepthUplink OBJECT-TYPE SYNTAX INTEGER { default(0), default128(1), default256(2), default512(3), sixty-four(64), one-two-eight(128), two-five-six(256), five-one-two(512)} MAX-ACCESS read-write STATUS current DESCRIPTION "VC Depth in the uplink Not currently supported with 450m." ::={whispBoxConfig 322} insecureProtocols OBJECT-TYPE SYNTAX INTEGER { default(0), allow(1), deny(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable determines if insecure protocols namely HTTP, Telnet, FTP, SSH, NTP, TFTP, SNMPv2 are allowed. 0: Default 1: Allow 2: Deny" ::={whispBoxConfig 323} passwordMaxFailedAttempts OBJECT-TYPE SYNTAX INTEGER (0..10) UNITS "Range: 3-10, 0 = Disable" MAX-ACCESS read-write STATUS current DESCRIPTION "Max successive failed attempts to qualify for a password lock out" ::={whispBoxConfig 324} passwordFailedAttemptTraceDuration OBJECT-TYPE SYNTAX INTEGER (60..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Duration to monitor successive password failed attempts" ::={whispBoxConfig 325} passwordLockoutDuration OBJECT-TYPE SYNTAX INTEGER (60..300) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Duration for the password lockout" ::={whispBoxConfig 326} icmpArpRateLoggingThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the threshold rate (packets per minute) for ICMP/ARP traffic monitoring. A syslog alert is generated if the packet rate exceeds this value." ::={whispBoxConfig 327} icmpArpRateLoggingDuration OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the monitoring duration (in minutes) for ICMP/ARP traffic. A syslog alert is generated if the packet rate exceeds the configured threshold during this period." ::={whispBoxConfig 328} strictTransportSecurityExpiryTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Expiry time for Strict Transport Security (RFC 6797) in seconds, 0 to disable" ::={whispBoxConfig 333} afcSpectrumAvailListInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This gives the spectrum availability information received from Automated Frequency Coordination server" ::={whispAfcStatus 1} afcSpectrumExpiry OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This gives the spectrum availability information received from Automated Frequency Coordination server" ::={whispAfcStatus 2} afcServerVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Automated Frequency Coordination server version" ::={whispAfcStatus 3} afcState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of Automated Frequency Coordination" ::={whispAfcStatus 4} afcLatitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device latitude which is reported to the Automated Frequency Coordination server" ::={whispAfcStatus 5} afcLongitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device longitude which is reported to the Automated Frequency Coordination server" ::={whispAfcStatus 6} afcDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current state description of Automated Frequency Coordination" ::={whispAfcStatus 7} afcAuthTokenStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of Automated Frequency Coordination Authorization token" ::={whispAfcStatus 8} -- Box level control. saveFlash OBJECT-TYPE SYNTAX INTEGER { doNotSaveToFlash(0), saveToFlash(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This variable is currently deprecated." ::={whispBoxControls 1} reboot OBJECT-TYPE SYNTAX INTEGER { finishedReboot(0), reboot(1), fullReboot(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. Setting the variable to 2 will perform a full reboot of a 450i radio, while performing a normal reboot on other radios." ::={whispBoxControls 2} clearEventLog OBJECT-TYPE SYNTAX INTEGER { notClear(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to 1 will clear the event log." ::={whispBoxControls 3} rebootIfRequired OBJECT-TYPE SYNTAX INTEGER { rebootNotRequired(0), rebootRequired(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to 1 will reboot the unit if reboot is required." ::={whispBoxControls 4} clearBERStats OBJECT-TYPE SYNTAX INTEGER { doNotClearBERStats(0), clearBERStats(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats' When action is complete." ::={whispBoxControls 5} updateDevice OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Use to update the software on the device" ::={whispBoxControls 6} importConfigFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set to URL to immediately download and apply configuration file" ::={whispBoxControls 7} exportConfigFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set to URL to immediately export and upload configuration file" ::={whispBoxControls 8} undoUnitWideSavedChanges OBJECT-TYPE SYNTAX INTEGER { undoUnitWideSavedChanges(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting to 1 will undo unit wide saved changes" ::={whispBoxControls 9} resetPoEAux OBJECT-TYPE SYNTAX INTEGER { reset(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting to 1 will reset Aux Ethernet port PoE on 450i or 450m radio. Port will be powered off for 2 seconds during the set call, which will delay the SNMP response." ::={whispBoxControls 10} clearEthernetStats OBJECT-TYPE SYNTAX INTEGER { clearEthernetStats(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting to 1 will clear Ethernet stats." ::={whispBoxControls 11} clearRadioStats OBJECT-TYPE SYNTAX INTEGER { clearRadioStats(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting to 1 will clear Radio stats." ::={whispBoxControls 12} ethernetPortAction OBJECT-TYPE SYNTAX INTEGER { bounceMainEthernetPort(1), bounceAuxEthernetPort(2), bounceSfpEthernetPort(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting: 1 - This will bounce the Main Ethernet Port. A 5 minute lockout period will follow a successful port bounce. A port bounce attempt during lockout period will result in Error response. If port is not supported or disabled this will also result in Error response. 2 - This will bounce the Aux Ethernet Port. A 5 minute lockout period will follow a successful port bounce. A port bounce attempt during lockout period will result in Error response. If port is not supported or disabled this will also result in Error response. Applicable only to select platforms that support this interface. 4 - This will bounce the SFP Ethernet Port. A 5 minute lockout period will follow a successful port bounce. A port bounce attempt during lockout period will result in Error response. If port is not supported or disabled this will also result in Error response. Applicable only to select platforms that support this interface. Getting: Bit position 1: 0 - Initiating this action is permitted. 1 - Currently in lockout or Main Ethernet Port is not available - initiating this action will return an Error. Bit position 2: 0 - Initiating this action is permitted. 1 - Currently in lockout or Aux Ethernet Port is not available - initiating this action will return an Error. Bit position 3: 0 - Initiating this action is permitted. 1 - Currently in lockout or SFP Ethernet Port is not available - initiating this action will return an Error." ::={whispBoxControls 13} txpowertemperatureupdate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Force an update to the transmit power based upon the current temperature. AP or BH only. Engineering use only." ::={whispBoxControls 14} whispBoxEvntLog OBJECT-TYPE SYNTAX EventString MAX-ACCESS read-only STATUS current DESCRIPTION "Event log for AP and SM." ::={whispBoxEventLog 1} whispBoxAttributesGroup OBJECT-GROUP OBJECTS { vlanAcceptQinQFrames, disableAes128, ingressVIDBox, ingressVIDPriorityBox, ingressVIDPriorityModeBox, providerVID, vlanSM8021pSupport, mac1VIDMapAddr, mac1VIDMapVid, mac1VIDMapPriority, mac1VIDMapPriorityMode, mac2VIDMapAddr, mac2VIDMapVid, mac2VIDMapPriority, mac2VIDMapPriorityMode, mac3VIDMapAddr, mac3VIDMapVid, mac3VIDMapPriority, mac3VIDMapPriorityMode, mac4VIDMapAddr, mac4VIDMapVid, mac4VIDMapPriority, mac4VIDMapPriorityMode, mac5VIDMapAddr, mac5VIDMapVid, mac5VIDMapPriority, mac5VIDMapPriorityMode, mac6VIDMapAddr, mac6VIDMapVid, mac6VIDMapPriority, mac6VIDMapPriorityMode, mac7VIDMapAddr, mac7VIDMapVid, mac7VIDMapPriority, mac7VIDMapPriorityMode, mac8VIDMapAddr, mac8VIDMapVid, mac8VIDMapPriority, mac8VIDMapPriorityMode, mac9VIDMapAddr, mac9VIDMapVid, mac9VIDMapPriority, mac9VIDMapPriorityMode, mac10VIDMapAddr, mac10VIDMapVid, mac10VIDMapPriority, mac10VIDMapPriorityMode, vlanPortType, portVID, customSpecAnalyzerMinFreqSnmp, customSpecAnalyzerMaxFreqSnmp, timedSpectrumAnalysisDurationBox, spectrumAnalysisOnBoot, spectrumAnalysisActionBox, calibrationStatusBox, calibrationStatusBool, catalinaGainRxCH1, catalinaGainRxCH2, catalinaAttenTxCH1, catalinaAttenTxCH2, catalinaCurrDetSetpointTxCH1, catalinaCurrDetSetpointTxCH2, catalinaCurrDetReadRefTxCH1, catalinaCurrDetReadRefTxCH2, catalinaCurrDetReadPowerOnTxCH1, catalinaCurrDetReadPowerOnTxCH2, catalinaOpenLoopAttenTxCH1, catalinaOpenLoopAttenTxCH2, catalinaTargetDetSetpointTxCH1, catalinaTargetDetSetpointTxCH2, catalinaGainReductionRxCH1, catalinaGainReductionRxCH2, catalinaLoAttenRxCH1, catalinaLoAttenRxCH2, catalinaTargetGainRxCH1, catalinaTargetGainRxCH2, whispBoxSoftwareVer, whispBoxFPGAVer, whispBoxEsn, whispBoxBoot, boxTemperature, boxDeviceType, boxDeviceTypeID, boxEncryption, boxEncryptionDetailed, etherLinkStatus, boxFrequency, platformVer, platformType, dhcpLanIp, dhcpLanSubnetMask, dhcpLanGateway, dhcpRfPublicIp, dhcpRfPublicSubnetMask, dhcpRfPublicGateway, lanDhcpStatus, rfPublicDhcpStatus, natDhcpStatus, inSyncCount, outSyncCount, pllOutLockCount, txCalFailure, swVersion, pldVersion, platformInfo, antType, antPolarization, whispBoxP11Personality, whispBoxP11FPGAType, whispBoxP11BstrapFPGAVer, numDFSDetections, numLBTDetections, rxOverrunPkts, boxTemperatureC, boxTemperatureF, installationColorCode, colorCode, fullAccess, webAutoUpdate, pass1Status, pass2Status, bridgeUpstreamInterface, bridgeEntryTimeout, cnMaestroEnable, cnMaestroUrl, camID, camOnboardKey, camAccID, cnMaestroStatus, daVersion, cnMaestroCertValidation, afcOcspStapling, snmpMibPerm, bhTimingMode, powerControl, antennaGain, eirp, activeEirp, activeEirpStr, boxSystemTime, dynamicLearning, managementVID, managementVIDPriority, managementVIDPriorityMode, agingTimeout, remarkSrcVID, addRemarkVID, addRemarkPriority, deleteRemarkVID, deleteRemarkPriority, frameType, addVlanMember, removeVlanMember, transmitterOP, bridgeEnable, fecEnable, commStringRWrite, subnetMask, mngtIP, allowVIDAccess, setDefaultPlug, gpsInput, ism, userName, userPassword, userAccessLevel, userMode, deleteUser, lanDhcpState, dnsIpState, sessionTimeout, vlanMemberSource, addCustomFreqList, removeCustomFreqList, changeUsrPwd, mngtIP2, subnetMask2, mngtIP3, subnetMask3, mngtIP4, subnetMask4, mngtIP5, subnetMask5, mngtIP6, subnetMask6, mngtIP7, subnetMask7, mngtIP8, subnetMask8, mngtIP9, subnetMask9, mngtIP10, subnetMask10, bhvlanEnable, lldpBroadcastEnable, warningText, boardModel, currentCpuUsage, fccId, productTypeName, fpgaBuildDate, fpgaCompileInfo, txTempPowerCompensation, rxTempPowerOffset, txCatAttenChA, txCatAttenChB, nomadic, syslogDomainNameAppend, syslogServerAddr, syslogServerPort, syslogMinLevel, pingWdogEnable, pingWdogIP, pingWdogInterval, pingWdogRbtCnt, syslogStatTxSuccesses, syslogStatDropped, primaryDnsCurrentIp, secondaryDnsCurrentIp, apType, remoteDeviceType, apSmMode, endPointMode, microPoPGPSSyncSearchMode, gpsOutputEn, region, regionCode, regionAsia, regionEurope, regionNorthAmerica, regionOceania, regionSouthAmerica, regionAfrica, regionOtherRegulatory, mimoRateAdaptAlgorithm, radioRateAdapt, radioRateAdaptUL, minModRate, rateAdaptPerLuid, tcpAckPriority, qosGroupingLevel, lldpVlanTagging, lldpAdminMode, lldpPassthrough, dnsPrimaryMgmtIP, dnsAlternateMgmtIP, dnsMgmtDomainName, auxPortEnable, defaultIPAccessEnable, poeAuxEnable, addCustomFreqMimo, removeCustomFreqMimo, snmpv2cEnable, nearFieldRange, nearFieldOperation, nearFieldOperationActive, forceReassessment, forceReassessmentActive, ftpPort, httpPort, httpsPort, snmpPort, snmpTrapPort, icmpArpRateLoggingThreshold, icmpArpRateLoggingDuration, insecureProtocols, strictTransportSecurityExpiryTime, webAccess, snmpStatus, telnetStatus, ftpStatus, tftpStatus, sshStatus, lan1DhcpRelease, lan1DhcpRenew, lan1Dhcpv6Release, lan1Dhcpv6Renew, lan3DhcpRelease, lan3DhcpRenew, natDhcpRelease, natDhcpRenew, radioEngKeyed, radioWatchDogLogged, radioFatalErrorLogged, codePointSelect, prioritySelect, priorityPrecedence, pppoeCtlPriority, rfStatXmtUDataCnt, rfStatXmtBDataCnt, rfStatXmtMDataCnt, rfStatRcvUDataCnt, rfStatRcvBDataCnt, rfStatRcvMDataCnt, rfStatXmtCntlCnt, rfStatRcvCntlCnt, rfStatInSyncCount, rfStatOutSyncCount, rfStatOverrunCount, rfStatUnderrunCount, rfStatRcvCorruptDataCount, rfStatRcvCorruptControlCount, rfStatBadBcastCtlCnt, rfStatPLLOutOfLockCnt, rfStatBeaconVerMismatchCnt, rfStatBadFreqBcnRcvCnt, rfStatnonLiteBcnRcvCnt, rfStatUnsupFeatBcnRcvCnt, rfStatUnkwnFeatBcnRcvCnt, rfStatTxCalFailCnt, rfStatBadInSyncIDRcv, rfStatTempOutOfRange, rfStatRSSIOutOfRange, rfStatRangeCapEnf, rfStatRcvLTStart, rfStatRcvLTStartHS, rfStatRcvLTResult, rfStatXmtLTResult, rfStatPARspOosCount, rfStatPAReqAsync, rfStatFrameTooBig, rfStatBadRcvAck, rfStatBadRcvFragNum, rfStatRfSYncQMsgsDropped, rfStatBadRcvFragLen, rfStatSchedulerErrors, rfStatEVMSamples, rfStatEVMErrors, rfStatTxRingError, rfStatRxRingError, rfStatUnexpectedNonzeroBitmap, rfStatInvalidVCRFeceived, rfStatWMACFDISRcvOverruns, rfStatWMACDLCRcvOverruns, rfStatWMACDLCRInfoUnknowns, rfStatWMACDLCRinfoSheds, rfStatWPHYChokeCount, rfStatTDDSlips, rfStatVCClearErrors, rfStatRxNoBuffer, rfStatOTARCount, rfStatOTARErrors, whispFeatureKeyOrigin, poeT2Status, updateStatus, applyConfigStatus, bridgeCbFecStatbin, bridgeCbFecStatbout, bridgeCbFecStatbtoss, bridgeCbFecStatbtosscap, bridgeCbFecStatuin, bridgeCbFecStatuout, bridgeCbFecStatutoss, bridgeCbFecStatutosscap, bridgeCbEthAuxStatbin, bridgeCbEthAuxStatbout, bridgeCbEthAuxStatbtoss, bridgeCbEthAuxStatbtosscap, bridgeCbEthAuxStatuin, bridgeCbEthAuxStatuout, bridgeCbEthAuxStatutoss, bridgeCbEthAuxStatutosscap, bridgeCbEthSfpStatbin, bridgeCbEthSfpStatbout, bridgeCbEthSfpStatbtoss, bridgeCbEthSfpStatbtosscap, bridgeCbEthSfpStatuin, bridgeCbEthSfpStatuout, bridgeCbEthSfpStatutoss, bridgeCbEthSfpStatutosscap, bridgeCbFecStatfloods, bridgeCbEthAuxStatfloods, bridgeCbRFStatfloods, bridgeCbEthSfpStatfloods, bridgeCbRFStatbin, bridgeCbRFStatbout, bridgeCbRFStatbtoss, bridgeCbRFStatbtosscap, bridgeCbRFStatuin, bridgeCbRFStatuout, bridgeCbRFStatutoss, bridgeCbRFStatutosscap, bridgeCbErrStatNI1QSend, bridgeCbErrStatNI2QSend, bridgeCbErrStatBridgeFull, bridgeCbErrStatSendMsg, bridgeCbErrStatAPFecQSend, bridgeCbErrStatApRfQSend, fecStatLinkDetected, fecStatLinkUptime, fecStatLinkLost, fecStatUnderSizedToss, fecInDiscardsCount, fecInErrorsCount, fecOutDiscardsCount, fecOutErrorsCount, fecRxBabErr, fecTxHbErr, fecEthBusErr, fecCRCError, fecL3L4ChecksumErrs, fecRxFifoNoBuf, fecRxOverrun, fecLateCollision, fecRetransLimitExp, fecTxUnderrun, fecCarSenseLost, fecNoCarrier, fecLargeFrame, fecRuntFrame, fecExcessiveDeferrals, fecJabbers, fecRxPauseFrames, fecRxEthernetBounce, fecTxEthernetBounce, fecAuxStatLinkDetected, fecAuxStatLinkUptime, fecAuxStatLinkLost, fecAuxInDiscardsCount, fecAuxInErrorsCount, fecAuxOutDiscardsCount, fecAuxOutErrorsCount, fecAuxCRCError, fecAuxL3L4ChecksumErrs, fecAuxRxOverrun, fecAuxLateCollision, fecAuxRetransLimitExp, fecAuxTxUnderrun, fecAuxCarSenseLost, fecAuxNoCarrier, fecAuxLargeFrame, fecAuxRuntFrame, fecAuxExcessiveDeferrals, fecAuxJabbers, fecAuxRxPauseFrames, rfInDiscardsCountExt, rfInErrorsCountExt, rfOutDiscardsCountExt, rfOutErrorsCountExt, minModRateSatisfied, ethernetPortDisableCounter, rfInDiscardsCount, rfInErrorsCount, rfOutDiscardsCount, rfOutErrorsCount, packetOverloadCounter, fecInDiscardsOverloadCount, fecOutDiscardsOverloadCount, rfInDiscardsOverloadCount, rfOutDiscardsOverloadCount, framePeriodCurrent, hardwareVersion, radioStatusTransmitControlOverridden, radioStatusTrackingFailure, radioStatusOverTemperature, radioStatusSectorWeightsOff, radioStatusRxBeamFormingOff, radioStatusPowerDetectorInactive, radioStatusCatQuadCalFail, radioStatusAlarmReason, radioStatusAlarm, radioStatusFeedbackRssi, radioStatusFeedbackOvrg, atexHazlocPowerLimit, boxVcDepth, interleave, controlMessages, radioMSN, simulatedAirDelay, latitude, longitude, height, horizontalUncertainty, verticalUncertainty, bandwidth, whispWebUserAccessMode, whispUsrAuth, usrAccountEnableAccounting, userChangePassword, passwordMaxFailedAttempts, passwordFailedAttemptTraceDuration, passwordLockoutDuration, allowRejectThenLocal, pppoeFilter, smbFilter, ipv6smbFilter, snmpFilter, ipv6snmpFilter, userP1Filter, userP2Filter, userP3Filter, allOtherIpFilter, allOtherIpv6Filter, allIpv4Filter, allIpv6Filter, arpFilter, allOthersFilter, userDefinedPort1, port1TCPFilter, port1UDPFilter, userDefinedPort2, port2TCPFilter, port2UDPFilter, userDefinedPort3, port3TCPFilter, port3UDPFilter, bootpcFilter, ipv6bootpcFilter, bootpsFilter, ipv6bootpsFilter, ip4MultFilter, ipv6MultFilter, bpduFilter, packetFilterDirection, encryptionConfig, fccStaFrequencies, activeTxPowerStr, activeTxPowerHdths, ipv6State, dhcpv6State} STATUS current DESCRIPTION "Canopy Box Level Attributes group." ::= {whispBoxGroups 1} whispBoxControlGroup OBJECT-GROUP OBJECTS { enable8023linkBox, saveFlash, reboot, clearEventLog, rebootIfRequired, clearBERStats, updateDevice, undoUnitWideSavedChanges, clearEthernetStats, clearRadioStats, ethernetPortAction, txpowertemperatureupdate, ethernetBounceTimeout, resetPoEAux, siteInfoViewable, largeVCQ, snrCalculation, receiveQualityDebug, csrfSetting, poeT2Classification, idleTrafficEnable, idleTrafficSize, vcDepthDownlink, vcDepthUplink, enableSecurityBanner, textSecurityBanner, acceptSecurityBanner, passwdMinimumLengthRule, passwdCharacterTypes, passwdUsernameInclusion, historyRule, passwdMustChange, remoteUserLoginRules, importConfigFile, exportConfigFile} STATUS current DESCRIPTION "Canopy Box Level control group." ::= {whispBoxGroups 2} whispBoxBTGroup OBJECT-GROUP OBJECTS { whispBridgeMacAddr, whispBridgeDesLuid, whispBridgeAge, whispBridgeExt, whispBridgeHash, whispBridge802OneXStatus, whispBridgeCAM} STATUS current DESCRIPTION "Canopy Box Bridging Table group." ::= {whispBoxGroups 3} whispBoxVLANTableGroup OBJECT-GROUP OBJECTS { whispVID, whispVType, whispVAge} STATUS current DESCRIPTION "Canopy Box VLAN member Table group." ::= {whispBoxGroups 4} whispBoxCPTableGroup OBJECT-GROUP OBJECTS { codePoint0, codePoint1, codePoint2, codePoint3, codePoint4, codePoint5, codePoint6, codePoint7, codePoint8, codePoint9, codePoint10, codePoint11, codePoint12, codePoint13, codePoint14, codePoint15, codePoint16, codePoint17, codePoint18, codePoint19, codePoint20, codePoint21, codePoint22, codePoint23, codePoint24, codePoint25, codePoint26, codePoint27, codePoint28, codePoint29, codePoint30, codePoint31, codePoint32, codePoint33, codePoint34, codePoint35, codePoint36, codePoint37, codePoint38, codePoint39, codePoint40, codePoint41, codePoint42, codePoint43, codePoint44, codePoint45, codePoint46, codePoint47, codePoint48, codePoint49, codePoint50, codePoint51, codePoint52, codePoint53, codePoint54, codePoint55, codePoint56, codePoint57, codePoint58, codePoint59, codePoint60, codePoint61, codePoint62, codePoint63} STATUS current DESCRIPTION "Code Point Table group." ::= {whispBoxGroups 5} whispBoxUserTableGroup OBJECT-GROUP OBJECTS { entryIndex, userLoginName, userPswd, accessLevel, loginStatus, loginMethod, sessionTime} STATUS current DESCRIPTION "Canopy Box User Information Table group." ::= {whispBoxGroups 6} whispLayer2NeighborTableGroup OBJECT-GROUP OBJECTS { entryL2Index, neighborMAC, neighborIP, neighborSiteName} STATUS current DESCRIPTION "Canopy Box Layer 2 Neighbor information." ::= {whispBoxGroups 7} whispBoxNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { boxLan1DHCPClientEvent, boxPoEType2PowerNotPresent, radioStatusAlarmEvent, minModRateEvent} STATUS current DESCRIPTION "Canopy Box Notification Group." ::= {whispBoxGroups 8} whispBoxVLANRemarkTableGroup OBJECT-GROUP OBJECTS { sourceVID, remarkVIDState, remarkVID, remarkPriorityState, remarkPriority} STATUS current DESCRIPTION "Canopy Box VLAN Remarking Table group." ::= {whispBoxGroups 9} whispBoxSNMPv3Group OBJECT-GROUP OBJECTS { snmpv3EngineId, snmpv3SecLvl, snmpv3AuthProt, snmpv3PrivProt, roUserName, roAuthPassword, roPrivPassword, rwUserEnable, rwUserName, rwAuthPassword, rwPrivPassword, userName1, user1Enable, user1AuthPassword, user1PrivPassword, userGroup1, userName2, user2Enable, user2AuthPassword, user2PrivPassword, user2Group, userName3, user3Enable, user3AuthPassword, user3PrivPassword, user3Group, snmpv3TrapEnable} STATUS current DESCRIPTION "Canopy Box SNMPv3 Group." ::= {whispBoxGroups 10} whispBoxLinkTestGroup OBJECT-GROUP OBJECTS { linkTestLUIDBox, linkTestDurationBox, linkTestRAProgCntOverrideBox, linkTestActionBox, linkTestPktLengthBox, linkTestModeBox, linkTestSNRCalculationBox, linkTestWithDualPathBox, linkTestNumPktBox, linkTestForceModulationBox, linkTestDirectionBox, testLUIDBox, linkTestStatusBox, linkTestErrorBox, testDurationBox, downLinkRateBox, upLinkRateBox, downLinkRateExtrapolatedBox, upLinkRateExtrapolatedBox, downLinkEffBox, maxDwnLinkIndexBox, actDwnLinkIndexBox, expDwnFragCountBox, actDwnFragCountBox, upLinkEffBox, expUpFragCountBox, actUpFragCountBox, maxUpLinkIndexBox, actUpLinkIndexBox, fragments1xDwnLinkVerticalBox, fragments2xDwnLinkVerticalBox, fragments3xDwnLinkVerticalBox, fragments4xDwnLinkVerticalBox, fragments1xUpLinkVerticalBox, fragments2xUpLinkVerticalBox, fragments3xUpLinkVerticalBox, fragments4xUpLinkVerticalBox, fragments1xDwnLinkHorizontalBox, fragments2xDwnLinkHorizontalBox, fragments3xDwnLinkHorizontalBox, fragments4xDwnLinkHorizontalBox, fragments1xUpLinkHorizontalBox, fragments2xUpLinkHorizontalBox, fragments3xUpLinkHorizontalBox, fragments4xUpLinkHorizontalBox, bitErrorsCorrected1xDwnLinkVerticalBox, bitErrorsCorrected2xDwnLinkVerticalBox, bitErrorsCorrected3xDwnLinkVerticalBox, bitErrorsCorrected4xDwnLinkVerticalBox, bitErrorsCorrected1xUpLinkVerticalBox, bitErrorsCorrected2xUpLinkVerticalBox, bitErrorsCorrected3xUpLinkVerticalBox, bitErrorsCorrected4xUpLinkVerticalBox, signalToNoiseRatioDownLinkVerticalBox, signalToNoiseRatioUpLinkVerticalBox, bitErrorsCorrected1xDwnLinkHorizontalBox, bitErrorsCorrected2xDwnLinkHorizontalBox, bitErrorsCorrected3xDwnLinkHorizontalBox, bitErrorsCorrected4xDwnLinkHorizontalBox, bitErrorsCorrected1xUpLinkHorizontalBox, bitErrorsCorrected2xUpLinkHorizontalBox, bitErrorsCorrected3xUpLinkHorizontalBox, bitErrorsCorrected4xUpLinkHorizontalBox, signalToNoiseRatioDownLinkHorizontalBox, signalToNoiseRatioUpLinkHorizontalBox, linkTestLastRunTime, linkTestMissedFragDwnLink, linkTestMissedFragUpLink, linkTestNumPktTxActCnt, linkTestNumPktTxExpCnt, linkTestNumPktRxActCnt, linkTestNumPktRxExpCnt, linkTestNumInProgCnt, linkTestMVCVC, linkTestMVCLuid, linkTestMVCPriority, linkTestMVCXmtFragsDL, linkTestMVCRcvFragsDL, linkTestMVCThroughputDL, linkTestMVCEfficiencyDL, linkTestMVCSumimoModRateDL, linkTestMVCSumimoXmtModeDL, linkTestMVCMumimoModRateDL, linkTestMVCMumimoXmtModeDL, linkTestMVCGroupingRatioDL, linkTestMVCXmtFragsUL, linkTestMVCRcvFragsUL, linkTestMVCThroughputUL, linkTestMVCEfficiencyUL, linkTestMVCSumimoModRateUL, linkTestMVCSumimoXmtModeUL, linkTestMVCMumimoModRateUL, linkTestMVCMumimoXmtModeUL, linkTestMVCGroupingRatioUL, linkTestMVCAverageRateDL, linkTestMVCAverageRateUL, linkTestMVCXmtFragsTotalDL, linkTestMVCRcvFragsTotalDL, linkTestMVCThroughputTotalDL, linkTestMVCThroughputTotalUntestedVCsDL, linkTestMVCThroughputTotalUntestedDataChannelsDL, linkTestMVCEfficiencyTotalDL, linkTestMVCSlotDistributionDL, linkTestMVCXmtFragsTotalUL, linkTestMVCRcvFragsTotalUL, linkTestMVCThroughputTotalUL, linkTestMVCThroughputTotalUntestedDataChannelsUL, linkTestMVCEfficiencyTotalUL, linkTestMVCSlotDistributionUL, linkTestMVCAverageGroupSizeDL, linkTestMVCAverageGroupSizeUL, linkTestMVCGroupSize, linkTestMVCDistributionPercent, linkTestMVCAvgSlotCount, linkTestMVCDistributionPercentUL, linkTestMVCAvgSlotCountUL, linkTestPriorityLevelBox, linkTestFloodModeBox, linkTestMumimoBox, linkTestVCListBox, linkTestLUIDListBox, linkTestSMRestriction, linkTestDisplayUntestedPriorityChannelsBox, linkTestBlockUserTrafficBox, linkTestIgnoreCIRBox} STATUS current DESCRIPTION "Canopy Box Link Test group." ::= {whispBoxGroups 11} whispBoxL3PVIDMapTableGroup OBJECT-GROUP OBJECTS { l3PVIDMapKey, l3PVIDIpAddress, l3PVIDNetmask, l3PVIDMapVlan, l3PVIDPriorityMode, l3PVIDPriority} STATUS current DESCRIPTION "Canopy Box L3 PVID Mapping Table group." ::= {whispBoxGroups 12} whispBoxCBRSGroup OBJECT-GROUP OBJECTS { cbsdCpiEncodedData, cbsdLatitude, cbsdLongitude, cbsdHeight, cbsdHeightType, cbsdHorizontalAccuracy, cbsdVerticalAccuracy, cbsdAntennaAzimuth, cbsdAntennaDownTilt, cbsdAntennaGain, cbsdAntennaBeamwidth, cbsdEirpCapability, cbsdCpiInstallerId, cbsdCpiInstallerName, cbsdCpiInstallCertTime} STATUS current DESCRIPTION "Canopy Box Citizens Broadband Radio Service (CBRS) group." ::= {whispBoxGroups 13} whispMACAddressFilterGroup OBJECT-GROUP OBJECTS { addModifyMACAddressFilter, rmMACAddressFilter, enableMACAddressFilter, defaultMACAddressFilterAction, addModifyMACAddressFilterAction} STATUS current DESCRIPTION "Canopy MAC Address Filtering config group." ::= {whispBoxGroups 14} whispBridgeTbUsed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of used entries in bridging table." ::={whispBoxBridgeVar 1} whispBridgeTbFree OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of free entries in bridging table." ::={whispBoxBridgeVar 2} whispBridgeTbErr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Bridging table errors." ::={whispBoxBridgeVar 3} codePoint0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 0. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 1} codePoint1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 1." ::={whispBoxCPVar 2} codePoint2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 2." ::={whispBoxCPVar 3} codePoint3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 3." ::={whispBoxCPVar 4} codePoint4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 4." ::={whispBoxCPVar 5} codePoint5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 5." ::={whispBoxCPVar 6} codePoint6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 6." ::={whispBoxCPVar 7} codePoint7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 7." ::={whispBoxCPVar 8} codePoint8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 8. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 9} codePoint9 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 9." ::={whispBoxCPVar 10} codePoint10 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 10." ::={whispBoxCPVar 11} codePoint11 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 11." ::={whispBoxCPVar 12} codePoint12 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 12." ::={whispBoxCPVar 13} codePoint13 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 13." ::={whispBoxCPVar 14} codePoint14 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 14." ::={whispBoxCPVar 15} codePoint15 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 15." ::={whispBoxCPVar 16} codePoint16 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 16. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 17} codePoint17 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 17." ::={whispBoxCPVar 18} codePoint18 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 18." ::={whispBoxCPVar 19} codePoint19 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 19." ::={whispBoxCPVar 20} codePoint20 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 20." ::={whispBoxCPVar 21} codePoint21 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 21." ::={whispBoxCPVar 22} codePoint22 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 22." ::={whispBoxCPVar 23} codePoint23 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 23." ::={whispBoxCPVar 24} codePoint24 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 24. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 25} codePoint25 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 25." ::={whispBoxCPVar 26} codePoint26 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 26." ::={whispBoxCPVar 27} codePoint27 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 27." ::={whispBoxCPVar 28} codePoint28 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 28." ::={whispBoxCPVar 29} codePoint29 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 29." ::={whispBoxCPVar 30} codePoint30 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 30." ::={whispBoxCPVar 31} codePoint31 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 31." ::={whispBoxCPVar 32} codePoint32 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 32. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 33} codePoint33 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 33." ::={whispBoxCPVar 34} codePoint34 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 34." ::={whispBoxCPVar 35} codePoint35 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 35." ::={whispBoxCPVar 36} codePoint36 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 36." ::={whispBoxCPVar 37} codePoint37 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 37." ::={whispBoxCPVar 38} codePoint38 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 38." ::={whispBoxCPVar 39} codePoint39 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 39." ::={whispBoxCPVar 40} codePoint40 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 40. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 41} codePoint41 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 41." ::={whispBoxCPVar 42} codePoint42 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 42." ::={whispBoxCPVar 43} codePoint43 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 43." ::={whispBoxCPVar 44} codePoint44 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 44." ::={whispBoxCPVar 45} codePoint45 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 45." ::={whispBoxCPVar 46} codePoint46 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 46." ::={whispBoxCPVar 47} codePoint47 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 47." ::={whispBoxCPVar 48} codePoint48 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 48. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 49} codePoint49 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 49." ::={whispBoxCPVar 50} codePoint50 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 50." ::={whispBoxCPVar 51} codePoint51 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 51." ::={whispBoxCPVar 52} codePoint52 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 52." ::={whispBoxCPVar 53} codePoint53 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 53." ::={whispBoxCPVar 54} codePoint54 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 54." ::={whispBoxCPVar 55} codePoint55 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 55." ::={whispBoxCPVar 56} codePoint56 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 56. Read-only to maintain backward compatibility with IPv4 header's TOS byte." ::={whispBoxCPVar 57} codePoint57 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 57." ::={whispBoxCPVar 58} codePoint58 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 58." ::={whispBoxCPVar 59} codePoint59 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 59." ::={whispBoxCPVar 60} codePoint60 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 60." ::={whispBoxCPVar 61} codePoint61 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 61." ::={whispBoxCPVar 62} codePoint62 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 62." ::={whispBoxCPVar 63} codePoint63 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 63." ::={whispBoxCPVar 64} -- Lan1 DHCP Client Event on AP or SM (with NAT disabled) boxLan1DHCPClientEvent NOTIFICATION-TYPE OBJECTS { dhcpLanIp, whispBoxEsn} STATUS current DESCRIPTION "Lan1 DHCP Client has received a new address via DHCP" ::={whispBoxDHCPClientEvent 1} -- Transmit disabled due to PoE 802.3at Type 2 not present and not being ignored. boxPoEType2PowerNotPresent NOTIFICATION-TYPE OBJECTS { whispBoxEsn} STATUS current DESCRIPTION "802.3at Type 2 PoE not present, transmit and PoE out disabled" ::={whispBoxPoEEvent 1} -- Radio Status Alarm. radioStatusAlarmEvent NOTIFICATION-TYPE OBJECTS { radioStatusAlarmReason, whispBoxEsn} STATUS current DESCRIPTION "Radio Alarm Event notification." ::={whispBoxRadioAlarmEvent 1} -- Minimum Modulation Rate Event Notification. minModRateEvent NOTIFICATION-TYPE OBJECTS { minModRateSatisfied, whispBoxEsn} STATUS current DESCRIPTION "Minimum Modulation Rate Event Notification. Value indicates whether or not minimum modulation rate requirement has been satisfied. PTP only." ::={whispBoxMinModRateEvent 1} dnsIpState OBJECT-TYPE SYNTAX INTEGER { manual(0), automatic(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration for DNS server IP addresses of the management interface are learned: 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP 1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface" ::={whispBoxDNS 1} dnsPrimaryMgmtIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Primary DNS IP address for the management interface." ::={whispBoxDNS 2} dnsAlternateMgmtIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary DNS IP address for the management interface." ::={whispBoxDNS 3} dnsMgmtDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Domain Name to use for management DNS configuration. This domain name may be concatonated to DNS names used configured for the management interface." ::={whispBoxDNS 4} trapDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend is set to appendDomain, the trap1 name used would be 'trap1.example.com'." ::={whispBoxDNS 5} trap1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 1. Format is either an IP address or DNS name." ::={whispBoxDNS 6} trap2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 2. Format is either an IP address or DNS name." ::={whispBoxDNS 7} trap3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 3. Format is either an IP address or DNS name." ::={whispBoxDNS 8} trap4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 4. Format is either an IP address or DNS name." ::={whispBoxDNS 9} trap5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 5. Format is either an IP address or DNS name." ::={whispBoxDNS 10} trap6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 6. Format is either an IP address or DNS name." ::={whispBoxDNS 11} trap7 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 7. Format is either an IP address or DNS name." ::={whispBoxDNS 12} trap8 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 8. Format is either an IP address or DNS name." ::={whispBoxDNS 13} trap9 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 9. Format is either an IP address or DNS name." ::={whispBoxDNS 14} trap10 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 10. Format is either an IP address or DNS name." ::={whispBoxDNS 15} snmpv2cEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This variable is deprecated, please use snmpStatus." ::={whispBoxSNMPv3 1} snmpv3EngineId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (10..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMPv3 engine administratively-unique identifier. Length of the identifier should be 5-32 octets which is 10-64 hexadecimal characters and even." ::={whispBoxSNMPv3 2} snmpv3SecLvl OBJECT-TYPE SYNTAX INTEGER { noAuth-noPriv(0), auth-noPriv(1), auth-priv(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The security level of the SNMPv3 Engine." ::={whispBoxSNMPv3 3} snmpv3AuthProt OBJECT-TYPE SYNTAX INTEGER { md5(0), sha(1), sha256(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMPv3 message authentication protocol to use. Currently MD5, SHA1 and SHA256 are supported." ::={whispBoxSNMPv3 4} snmpv3PrivProt OBJECT-TYPE SYNTAX INTEGER { cbc-des(0), cfb-aes(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "The SNMPv3 message privacy/encryption protocol to use. Currently CBC-DES and CFB-AES are supported." ::={whispBoxSNMPv3 5} roUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Only username." ::={whispBoxSNMPv3 6} roAuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Only message authentication password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 7} roPrivPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Only message privacy/encryption password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 8} rwUserEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write User Enable." ::={whispBoxSNMPv3 9} rwUserName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write Username." ::={whispBoxSNMPv3 10} rwAuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 11} rwPrivPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 12} snmpv3TrapEnable OBJECT-TYPE SYNTAX INTEGER { disabled(0), roUserTrapEnable(1), rwUserTrapEnable(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Trap enable option: (0) Disable - No SNMPv3 Traps Sent (1) Enable Traps to be sent for SNMPv3 Read-Only User (2) Enable Traps to be sent for SNMPv3 Read-Write User NOTE: When disabled SNMPv2c Trap configuration is used." ::={whispBoxSNMPv3 13} user1Enable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Additional User1 Enable." ::={whispBoxSNMPv3 14} userName1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Additional SNMPv3 Username1." ::={whispBoxSNMPv3 15} user1AuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 16} user1PrivPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 17} userGroup1 OBJECT-TYPE SYNTAX INTEGER { readwrite(1), readonly(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 User1 Group (ReadWrite/ReadOnly)." ::={whispBoxSNMPv3 18} userName2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Additional SNMPv3 Username2." ::={whispBoxSNMPv3 19} user2Enable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Additional User2 Enable." ::={whispBoxSNMPv3 20} user2AuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 21} user2PrivPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 22} user2Group OBJECT-TYPE SYNTAX INTEGER { readwrite(1), readonly(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 User1 Group (ReadWrite/ReadOnly)." ::={whispBoxSNMPv3 23} userName3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Additional SNMPv3 Username1." ::={whispBoxSNMPv3 24} user3Enable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Additional User3 Enable." ::={whispBoxSNMPv3 25} user3AuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message authentication password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 26} user3PrivPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 Read-Write message privacy/encryption password.Minimum 8 and maximum 32 characters long." ::={whispBoxSNMPv3 27} user3Group OBJECT-TYPE SYNTAX INTEGER { readwrite(1), readonly(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "SNMPv3 User3 Group (ReadWrite/ReadOnly)." ::={whispBoxSNMPv3 28} whispRegStatusBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This shows the registration status of a link." ::={whispBoxLink 4} -- Link test configuration linkTestLUIDBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "LUID selection for Link Test. Valid range: 2-255. Read-Only for SM or Backhaul slave, Read/Write for AP." ::={whispBoxLinkTestConfig 1} linkTestDurationBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Duration for the Link Test. Valid range: 2-10 seconds" ::={whispBoxLinkTestConfig 2} -- Link test action linkTestActionBox OBJECT-TYPE SYNTAX INTEGER { stopped(0), start(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicates the idle state meaning no test is running or the current test is done. That's why the word stopped is used and not the action verb stop." ::={whispBoxLinkTestConfig 3} linkTestPktLengthBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Packet length for Link Test. Valid range: 64-1714 bytes" ::={whispBoxLinkTestConfig 4} linkTestModeBox OBJECT-TYPE SYNTAX INTEGER { linktestwithmultipleVCs(4), linktestwithoutbridging(0), linktestwithbridging(1), linktestwithbridgingandmir(2), extrapolatedlinktest(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Link Test Mode 0 = Link Test without Bridging 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR 3 = Extrapolated Link Test (send only a few packets measuring their quality and extrapolate out the throughput) This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector. Extrapolated Link Test is not available for FSK radios. 4 = Link Test with Multiple LUIDs (traffic sent to all registered LUIDs, or specified LUIDs) - PMP 450m only Note: Link Test must NOT be running when attempting to set this or an SNMP error will occur." ::={whispBoxLinkTestConfig 5} linkTestSNRCalculationBox OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will slightly degrade packet per second capabilities. Only applicable to GenII OFDM products and up." ::={whispBoxLinkTestConfig 6} linkTestWithDualPathBox OBJECT-TYPE SYNTAX INTEGER { lowpriorityvconly(0), highandlowpriorityvcs(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Link Test with: 0 = Low Priority Data Channel only 1 = All Available Data Channels" ::={whispBoxLinkTestConfig 7} -- Link test configuration linkTestNumPktBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Number of packets to send. Valid range: 0-64 where 0 will flood the link for the duration of the test." ::={whispBoxLinkTestConfig 8} linkTestForceModulationBox OBJECT-TYPE SYNTAX INTEGER { normalRateAdapt(0), forceMaxModulation(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Engineering use only. Link Test with: 0 = Normal Rate Adapt algorithm 1 = Force to max modultion - No Rate Adapt Algorithm" ::={whispBoxLinkTestConfig 9} linkTestDirectionBox OBJECT-TYPE SYNTAX INTEGER { bidirectional(0), uplinkonly(1), downlinkonly(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Link Test Direction - Engineering Use Only 0 = default (will do bidirectional) 1 = Uplink Only 2 = Downlink Only 3 = Bi-Directional (same as 0, setting to 3 will result in setting it to 0)" ::={whispBoxLinkTestConfig 10} linkTestFloodModeBox OBJECT-TYPE SYNTAX INTEGER { external(0), internal(1)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This OID has been deprecated." ::={whispBoxLinkTestConfig 11} linkTestMumimoBox OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "PMP 450m only. Link Test usage: 0 = MU-MIMO disabled (legacy or sector mode) 1 = MU-MIMO enabled" ::={whispBoxLinkTestConfig 12} linkTestVCListBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This OID is now obsolete. Please use linkTestLUIDListBox instead." ::={whispBoxLinkTestConfig 13} linkTestSMRestriction OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Control access to SM initiated Link Tests. Disabling will permit all Link Tests initiated at the SM. Enabling will only permit Link Tests that allow user traffic to pass. PMP only." ::={whispBoxLinkTestConfig 14} linkTestPriorityLevelBox OBJECT-TYPE SYNTAX INTEGER { lowpriority(0), medpriority(1), highpriority(2), ultrapriority(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "PMP 450m only. Link Test with: 0 = Link Test Low Priority Data Channels 1 = Link Test Low and Medium Priority Data Channels 2 = Link Test Low, Medium and High Priority Data Channels 3 = Link Test All Data Channels" ::={whispBoxLinkTestConfig 15} linkTestDisplayUntestedPriorityChannelsBox OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This OID has been deprecated. All untested Data Channels with traffic are now marked as such by the 'Tested' column and always displayed." ::={whispBoxLinkTestConfig 16} linkTestIgnoreCIRBox OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "PMP 450m only. Ignore configured CIR when performing Link Test with Multiple LUIDs 0 - Use CIR 1 - Ignore CIR" ::={whispBoxLinkTestConfig 17} linkTestLUIDListBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "PMP 450m only. Link Test usage: Enter LUIDs to be tested (eg. 2 - 22,24,32) Empty field or 0 will flood all registered LUIDs for duration of test Note: Link Test must NOT be running when attempting to set this or an SNMP error will occur." ::={whispBoxLinkTestConfig 18} linkTestBlockUserTrafficBox OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "PMP 450m only. Choose whether or not to block user traffic during a Link Test With Mulitple LUIDs. When blocking is enabled, only link test packets will be allowed to get through for the duration of the test. When blocking is disbaled, user data is allowed through, and link test fills any remaining slots. 0 = Allow User Traffic (default) 1 = Block User Traffic" ::={whispBoxLinkTestConfig 19} linkTestRAProgCntOverrideBox OBJECT-TYPE SYNTAX INTEGER (0..2047) MAX-ACCESS read-write STATUS current DESCRIPTION "Engineering use only. Override value for rate adapt progressive count (if being applied): range 0 - 2047" ::={whispBoxLinkTestConfig 20} -- Link test results testLUIDBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "LUID number of selected unit." ::={whispBoxLinkTestResult 1} linkTestStatusBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Status for Link Test." ::={whispBoxLinkTestResult 2} linkTestErrorBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Error status of Link Test: (1) Failed to recieve handshake from remote device (2) No session with selected LUID. Please try again after session established. (3) Received a bad transaction ID. Please try again. (4) We werent able to send the test request to the remote device. (5) We didnt receive any results from the remote device." ::={whispBoxLinkTestResult 3} testDurationBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of link test." ::={whispBoxLinkTestResult 4} downLinkRateBox OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Rate." ::={whispBoxLinkTestResult 5} upLinkRateBox OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Rate." ::={whispBoxLinkTestResult 6} downLinkEffBox OBJECT-TYPE SYNTAX INTEGER UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Efficiency." ::={whispBoxLinkTestResult 7} maxDwnLinkIndexBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "For link test results, the maximum possible downlink efficiency percentage (always 100%)." ::={whispBoxLinkTestResult 8} actDwnLinkIndexBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Actual downlink index." ::={whispBoxLinkTestResult 9} expDwnFragCountBox OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expected Fragment Count." ::={whispBoxLinkTestResult 10} actDwnFragCountBox OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Fragment Count" ::={whispBoxLinkTestResult 11} upLinkEffBox OBJECT-TYPE SYNTAX INTEGER UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink efficiency." ::={whispBoxLinkTestResult 12} expUpFragCountBox OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink expected Fragment Count." ::={whispBoxLinkTestResult 13} actUpFragCountBox OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual uplink Fragment Count." ::={whispBoxLinkTestResult 14} maxUpLinkIndexBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "For link test results, the maximum possible uplink efficiency percentage (always 100%)." ::={whispBoxLinkTestResult 15} actUpLinkIndexBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Uplink index." ::={whispBoxLinkTestResult 16} fragments1xDwnLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 17} fragments2xDwnLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 18} fragments3xDwnLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 19} fragments4xDwnLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 20} fragments1xUpLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 21} fragments2xUpLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 22} fragments3xUpLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 23} fragments4xUpLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 24} bitErrorsCorrected1xDwnLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 25} bitErrorsCorrected2xDwnLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 26} bitErrorsCorrected3xDwnLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 27} bitErrorsCorrected4xDwnLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 28} bitErrorsCorrected1xUpLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on uplink at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 29} bitErrorsCorrected2xUpLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on uplink at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 30} bitErrorsCorrected3xUpLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on uplink at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 31} bitErrorsCorrected4xUpLinkVerticalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on uplink at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 32} signalToNoiseRatioDownLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the downlink. For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 33} signalToNoiseRatioUpLinkVerticalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the uplink. For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispBoxLinkTestResult 34} fragments1xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 35} fragments2xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 36} fragments3xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 37} fragments4xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on downlink at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 38} fragments1xUpLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 39} fragments2xUpLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 40} fragments3xUpLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 41} fragments4xUpLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on uplink at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 42} bitErrorsCorrected1xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 43} bitErrorsCorrected2xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 44} bitErrorsCorrected3xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 45} bitErrorsCorrected4xDwnLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on downlink at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 46} bitErrorsCorrected1xUpLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on uplink at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 47} bitErrorsCorrected2xUpLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on uplink at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 48} bitErrorsCorrected3xUpLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of bit errors corrected on average per fragment on uplink at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 49} bitErrorsCorrected4xUpLinkHorizontalBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on uplink at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path. Fragments received in MIMO-A will only be counted on vertical." ::={whispBoxLinkTestResult 50} signalToNoiseRatioDownLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the downlink. For MIMO and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0." ::={whispBoxLinkTestResult 51} signalToNoiseRatioUpLinkHorizontalBox OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the uplink. For Gen II OFDM and forward. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0." ::={whispBoxLinkTestResult 52} downLinkRateExtrapolatedBox OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Extrapolated Downlink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector." ::={whispBoxLinkTestResult 53} upLinkRateExtrapolatedBox OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Extrapolated Uplink Rate from an extrapolated link test. Extrapolated Link Test sends only a few packets over the link and extrapolates this out to what would happen on a full link test. This is an estimation of the throughput based upon the modulation, efficiency, and data slots available. It intended to provide a basic link test test without impacting service for the sector." ::={whispBoxLinkTestResult 54} linkTestLastRunTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Time and Date when last link test ran." ::={whispBoxLinkTestResult 55} linkTestMissedFragDwnLink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of missed fragments during link test in the downlink. Only supported on 450 and 450i." ::={whispBoxLinkTestResult 56} linkTestMissedFragUpLink OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of missed fragments during link test in the uplink. Only supported on 450 and 450i." ::={whispBoxLinkTestResult 57} linkTestNumPktTxActCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of actual packets transmitted during link test." ::={whispBoxLinkTestResult 58} linkTestNumPktTxExpCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of expected packets to be transmitted during link test." ::={whispBoxLinkTestResult 59} linkTestNumPktRxActCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of actual packets received during link test." ::={whispBoxLinkTestResult 60} linkTestNumPktRxExpCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets expected to be received during link test." ::={whispBoxLinkTestResult 61} linkTestNumInProgCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Link Test Initiations ignored because we were actively executing a link test." ::={whispBoxLinkTestResult 62} linkTestMVCXmtFragsTotalDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Downlink Fragments Transmitted" ::={whispBoxLinkTestMVCResult 1} linkTestMVCRcvFragsTotalDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Downlink Fragments Received" ::={whispBoxLinkTestMVCResult 2} linkTestMVCThroughputTotalDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Downlink Throughput for Tested Data Channels" ::={whispBoxLinkTestMVCResult 3} linkTestMVCThroughputTotalUntestedVCsDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Total Downlink Throughput for Untested VCs. This is the amount of user traffic that was transmitted to VCs during the test that were not part of the Link Test. This OID is now deprecated. Please use linkTestMVCThroughputTotalUntestedDataChannelsDL instead." ::={whispBoxLinkTestMVCResult 4} linkTestMVCEfficiencyTotalDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Downlink Efficiency" ::={whispBoxLinkTestMVCResult 5} linkTestMVCSlotDistributionDL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Slot Distribution. Average group size per slot per frame represented as a percentage. 450m only." ::={whispBoxLinkTestMVCResult 6} linkTestMVCThroughputTotalUntestedDataChannelsDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Downlink Throughput for Untested Data Channels. This is the amount of user traffic that was transmitted to Data Channels during the test that were not part of the Link Test." ::={whispBoxLinkTestMVCResult 7} linkTestMVCXmtFragsTotalUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Uplink Fragments Transmitted" ::={whispBoxLinkTestMVCResult 8} linkTestMVCRcvFragsTotalUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Uplink Fragments Received" ::={whispBoxLinkTestMVCResult 9} linkTestMVCThroughputTotalUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Uplink Throughput for Tested Data Channels" ::={whispBoxLinkTestMVCResult 10} linkTestMVCThroughputTotalUntestedDataChannelsUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Uplink Throughput for Untested Data Channels. This is the amount of user traffic that was transmitted to Data Channels during the test that were not part of the Link Test." ::={whispBoxLinkTestMVCResult 11} linkTestMVCEfficiencyTotalUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Total Uplink Efficiency" ::={whispBoxLinkTestMVCResult 12} linkTestMVCSlotDistributionUL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Slot Distribution. Average group size per slot per frame represented as a percentage. 450m only." ::={whispBoxLinkTestMVCResult 13} linkTestMVCAverageGroupSizeDL OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Average Downlink aggregate group size. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 26 = 2.6). MU-MIMO Only" ::={whispBoxLinkTestMVCResult 14} linkTestMVCAverageGroupSizeUL OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Average Uplink aggregate group size. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 26 = 2.6). MU-MIMO Only" ::={whispBoxLinkTestMVCResult 15} whispBoxLinkTestMVCTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxLinkTestMVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Test with Multiple VC results." ::= {whispBoxLink 6} whispBoxLinkTestMVCEntry OBJECT-TYPE SYNTAX WhispBoxLinkTestMVCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Test with Multiple VC results." INDEX {linkTestMVCVC} ::= {whispBoxLinkTestMVCTable 1} WhispBoxLinkTestMVCEntry ::= SEQUENCE{ linkTestMVCVC INTEGER, linkTestMVCPriority INTEGER, linkTestMVCXmtFragsDL INTEGER, linkTestMVCRcvFragsDL INTEGER, linkTestMVCThroughputDL INTEGER, linkTestMVCEfficiencyDL INTEGER, linkTestMVCSumimoModRateDL INTEGER, linkTestMVCSumimoXmtModeDL INTEGER, linkTestMVCMumimoModRateDL INTEGER, linkTestMVCMumimoXmtModeDL INTEGER, linkTestMVCGroupingRatioDL INTEGER, linkTestMVCLuid INTEGER, linkTestMVCXmtFragsUL INTEGER, linkTestMVCRcvFragsUL INTEGER, linkTestMVCThroughputUL INTEGER, linkTestMVCEfficiencyUL INTEGER, linkTestMVCSumimoModRateUL INTEGER, linkTestMVCSumimoXmtModeUL INTEGER, linkTestMVCMumimoModRateUL INTEGER, linkTestMVCMumimoXmtModeUL INTEGER, linkTestMVCGroupingRatioUL INTEGER, linkTestMVCAverageRateDL INTEGER, linkTestMVCAverageRateUL INTEGER } linkTestMVCVC OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "VC" ::={whispBoxLinkTestMVCEntry 1} linkTestMVCPriority OBJECT-TYPE SYNTAX INTEGER { low(0), medium(1), high(2), ultraHigh(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Data Channel Priority" ::={whispBoxLinkTestMVCEntry 2} linkTestMVCXmtFragsDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Fragments Transmitted" ::={whispBoxLinkTestMVCEntry 3} linkTestMVCRcvFragsDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Fragments Received" ::={whispBoxLinkTestMVCEntry 4} linkTestMVCThroughputDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Throughput" ::={whispBoxLinkTestMVCEntry 5} linkTestMVCEfficiencyDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Efficiency" ::={whispBoxLinkTestMVCEntry 6} linkTestMVCSumimoModRateDL OBJECT-TYPE SYNTAX INTEGER { noSession(0), rate1X(1), rate2X(2), rate3X(3), rate4X(4), rate5X(5), rate6X(6), rate7X(7), rate8X(8)} MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink SU-MIMO Modulation Transmit Rate. 0 : No session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B" ::={whispBoxLinkTestMVCEntry 7} linkTestMVCSumimoXmtModeDL OBJECT-TYPE SYNTAX INTEGER { mimo-b(0), mimo-a(1), noSession(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink SU-MIMO Transmit Mode. 0 : MIMO-B 1 : MIMO-A 3 : No session" ::={whispBoxLinkTestMVCEntry 8} linkTestMVCMumimoModRateDL OBJECT-TYPE SYNTAX INTEGER { invalid(0), rate1X(1), rate2X(2), rate3X(3), rate4X(4), rate5X(5), rate6X(6), rate7X(7), rate8X(8)} MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink MU-MIMO Modulation Transmit Rate. 450m only. 0 : Invalid 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B" ::={whispBoxLinkTestMVCEntry 9} linkTestMVCMumimoXmtModeDL OBJECT-TYPE SYNTAX INTEGER { mimo-b(0), mimo-a(1), invalid(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink MU-MIMO Transmit Mode. 450m only. 0 : MIMO-B 1 : MIMO-A 3 : Invalid" ::={whispBoxLinkTestMVCEntry 10} linkTestMVCGroupingRatioDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Grouping Ratio. The percentage of time that a Data Channel is grouped with other Data Channels to make a MU-MIMO group. 450m only." ::={whispBoxLinkTestMVCEntry 11} linkTestMVCLuid OBJECT-TYPE SYNTAX INTEGER (2..239) MAX-ACCESS read-only STATUS current DESCRIPTION "Luid" ::={whispBoxLinkTestMVCEntry 12} linkTestMVCXmtFragsUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Fragments Transmitted" ::={whispBoxLinkTestMVCEntry 13} linkTestMVCRcvFragsUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Fragments Received" ::={whispBoxLinkTestMVCEntry 14} linkTestMVCThroughputUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Throughput" ::={whispBoxLinkTestMVCEntry 15} linkTestMVCEfficiencyUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Efficiency" ::={whispBoxLinkTestMVCEntry 16} linkTestMVCSumimoModRateUL OBJECT-TYPE SYNTAX INTEGER { noSession(0), rate1X(1), rate2X(2), rate3X(3), rate4X(4), rate5X(5), rate6X(6), rate7X(7), rate8X(8)} MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink SU-MIMO Modulation Transmit Rate. 0 : No session 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B" ::={whispBoxLinkTestMVCEntry 17} linkTestMVCSumimoXmtModeUL OBJECT-TYPE SYNTAX INTEGER { mimo-b(0), mimo-a(1), noSession(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink SU-MIMO Transmit Mode. 0 : MIMO-B 1 : MIMO-A 3 : No session" ::={whispBoxLinkTestMVCEntry 18} linkTestMVCMumimoModRateUL OBJECT-TYPE SYNTAX INTEGER { invalid(0), rate1X(1), rate2X(2), rate3X(3), rate4X(4), rate5X(5), rate6X(6), rate7X(7), rate8X(8)} MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink MU-MIMO Modulation Transmit Rate. 450m only. 0 : Invalid 1 : 1X QPSK MIMO-A 2 : 2X 16-QAM MIMO-A or QPSK MIMO-B 3 : 3X 64-QAM MIMO-A or 8-QAM MIMO-B 4 : 4X 256-QAM MIMO-A or 16-QAM MIMO-B 5 : 5X 32-QAM MIMO-B 6 : 6X 64-QAM MIMO-B 7 : 7X 128-QAM MIMO-B 8 : 8X 256-QAM MIMO-B" ::={whispBoxLinkTestMVCEntry 19} linkTestMVCMumimoXmtModeUL OBJECT-TYPE SYNTAX INTEGER { mimo-b(0), mimo-a(1), invalid(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink MU-MIMO Transmit Mode. 450m only. 0 : MIMO-B 1 : MIMO-A 3 : Invalid" ::={whispBoxLinkTestMVCEntry 20} linkTestMVCGroupingRatioUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Grouping Ratio. The percentage of time that a Data Channel is grouped with other Data Channels to make a MU-MIMO group. 450m only." ::={whispBoxLinkTestMVCEntry 21} linkTestMVCAverageRateDL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink Average Rate. The average Downlink modulation rate during the link test (SU-MIMO and MU-MIMO combined). This value is scaled up by 10 (ie. 69 = 6.9X average rate) 450m only." ::={whispBoxLinkTestMVCEntry 22} linkTestMVCAverageRateUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink Average Rate. The average Uplink modulation rate during the link test (SU-MIMO and MU-MIMO combined). This value is scaled up by 10 (ie. 69 = 6.9X average rate) 450m only." ::={whispBoxLinkTestMVCEntry 23} whispBoxLinkTestMVCSlotGroupingTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxLinkTestMVCSlotGroupingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Test with Multiple VC Slot Grouping results." ::= {whispBoxLink 7} whispBoxLinkTestMVCSlotGroupingEntry OBJECT-TYPE SYNTAX WhispBoxLinkTestMVCSlotGroupingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Link Test with Multiple VC Slot Grouping results. Only Valid after Link Test with Multiple VC has been run MU-MIMO Only" INDEX {linkTestMVCGroupSize} ::= {whispBoxLinkTestMVCSlotGroupingTable 1} WhispBoxLinkTestMVCSlotGroupingEntry ::= SEQUENCE{ linkTestMVCGroupSize INTEGER, linkTestMVCDistributionPercent INTEGER, linkTestMVCAvgSlotCount INTEGER, linkTestMVCDistributionPercentUL INTEGER, linkTestMVCAvgSlotCountUL INTEGER } linkTestMVCGroupSize OBJECT-TYPE SYNTAX INTEGER (1..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Group Size Only Valid after Link Test with Multiple LUIDs has been run. MU-MIMO Only" ::={whispBoxLinkTestMVCSlotGroupingEntry 1} linkTestMVCDistributionPercent OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Average Downlink group size per slot per frame represented as a percentage. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 169 = 16.9%). MU-MIMO Only" ::={whispBoxLinkTestMVCSlotGroupingEntry 2} linkTestMVCAvgSlotCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Average Downlink Slot Count Only Valid after Link Test with Multiple LUIDs has been run. MU-MIMO Only" ::={whispBoxLinkTestMVCSlotGroupingEntry 3} linkTestMVCDistributionPercentUL OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Average Uplink group size per slot per frame represented as a percentage. Only Valid after Link Test with Multiple LUIDs has been run. This value is scaled up by 10 (ie. 169 = 16.9%). MU-MIMO Only" ::={whispBoxLinkTestMVCSlotGroupingEntry 4} linkTestMVCAvgSlotCountUL OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Average Uplink Slot Count Only Valid after Link Test with Multiple LUIDs has been run. MU-MIMO Only" ::={whispBoxLinkTestMVCSlotGroupingEntry 5} certTableUserAuth OBJECT-TYPE SYNTAX SEQUENCE OF CertEntryUserAuth MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of CA Certificates for User Auth on radio." ::= {whispUserAuthSecurity 1} certEntryUserAuth OBJECT-TYPE SYNTAX CertEntryUserAuth MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of Certifcates." INDEX {certIdx} ::= {certTableUserAuth 1} CertEntryUserAuth ::= SEQUENCE{ certIdx INTEGER, certStatus INTEGER, certAction INTEGER, certDN DisplayString } certIdx OBJECT-TYPE SYNTAX INTEGER (3..4) MAX-ACCESS read-only STATUS current DESCRIPTION "User information table index." ::={certEntryUserAuth 1} certStatus OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "0: Inactive 1: Active" ::={certEntryUserAuth 2} certAction OBJECT-TYPE SYNTAX INTEGER { noop(0), delete(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "0: No Operation 1: Delete Certificate" ::={certEntryUserAuth 3} certDN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Distinguished Name of Certificate" ::={certEntryUserAuth 4} whispBoxRFPhysicalRadios OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio information table." ::= {whispBoxRFPhysical 1} whispBoxRFPhysicalRadioEntry OBJECT-TYPE SYNTAX WhispBoxRFPhysicalRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio information table entry." INDEX {radioIndex} ::= {whispBoxRFPhysicalRadios 1} WhispBoxRFPhysicalRadioEntry ::= SEQUENCE{ radioIndex INTEGER, radioType INTEGER, radioPaths INTEGER } radioIndex OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Index." ::={whispBoxRFPhysicalRadioEntry 1} radioType OBJECT-TYPE SYNTAX INTEGER { fsk(0), ofdm(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the radio is FSK or OFDM." ::={whispBoxRFPhysicalRadioEntry 2} radioPaths OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1. For MIMO, it can be greater (with a current maximum of 2)." ::={whispBoxRFPhysicalRadioEntry 3} whispBoxRFPhysicalRadioPaths OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio path information table." ::= {whispBoxRFPhysical 2} whispBoxRFPhysicalRadioPathEntry OBJECT-TYPE SYNTAX WhispBoxRFPhysicalRadioPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio path table entry." INDEX {radioIndex,pathIndex} ::= {whispBoxRFPhysicalRadioPaths 1} WhispBoxRFPhysicalRadioPathEntry ::= SEQUENCE{ pathIndex INTEGER } pathIndex OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Path Index." ::={whispBoxRFPhysicalRadioPathEntry 1} whispBoxRFPhysicalRadioFrequencies OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioFrequencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Available frequency information table." ::= {whispBoxRFPhysical 3} whispBoxRFPhysicalRadioFrequencyEntry OBJECT-TYPE SYNTAX WhispBoxRFPhysicalRadioFrequencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Available frequency table entry." INDEX {radioIndex,frequency} ::= {whispBoxRFPhysicalRadioFrequencies 1} WhispBoxRFPhysicalRadioFrequencyEntry ::= SEQUENCE{ frequency INTEGER } frequency OBJECT-TYPE SYNTAX INTEGER (0..9000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency." ::={whispBoxRFPhysicalRadioFrequencyEntry 1} carrierCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the enabled carriers. Read only. Canopy V only." ::={whispBoxRFConfig 4} componentCarrierCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Count of active component carriers. Read only. Canopy V only." ::={whispBoxRFConfig 5} whispBoxRFConfigRadios OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFConfigRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio configuration table." ::= {whispBoxRFConfig 1} whispBoxRFConfigRadioEntry OBJECT-TYPE SYNTAX WhispBoxRFConfigRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio config table entry." INDEX {radioConfigIndex} ::= {whispBoxRFConfigRadios 1} WhispBoxRFConfigRadioEntry ::= SEQUENCE{ radioConfigIndex INTEGER, radioFrequencyBand INTEGER } radioConfigIndex OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Config Index." ::={whispBoxRFConfigRadioEntry 1} radioFrequencyBand OBJECT-TYPE SYNTAX INTEGER { band700(0), band900(1), band2400(2), band3500(3), band3700(4), band4900(5), band5100(6), band5200(7), band5400(8), band5700(9), band5800(10), band5900(11), band6050(12), band3600(13), band4959(14), band3(15), band5170(16), band65(17), band67(18), band5763(19), band66(20)} MAX-ACCESS read-write STATUS current DESCRIPTION "Currently configured radio band. Set is Engineering use only." ::={whispBoxRFConfigRadioEntry 2} carrierConfig OBJECT-TYPE SYNTAX SEQUENCE OF CarrierConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Canopy V carrier configuration table" ::= {whispBoxRFConfig 2} carrierConfigEntry OBJECT-TYPE SYNTAX CarrierConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Canopy V carrier configuration table entry" INDEX {carrierTableIndex} ::= {carrierConfig 1} CarrierConfigEntry ::= SEQUENCE{ carrierTableIndex INTEGER, carrierBand INTEGER, carrierTxPower INTEGER, carrierRxPowerTarget INTEGER } carrierTableIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the Canopy V carrier config table" ::={carrierConfigEntry 1} carrierBand OBJECT-TYPE SYNTAX INTEGER { band700(0), band900(1), band2400(2), band3500(3), band3700(4), band4900(5), band5100(6), band5200(7), band5400(8), band5700(9), band5800(10), band5900(11), band6050(12), band3600(13), band4959(14), band3(15), band5170(16), band65(17), band67(18)} MAX-ACCESS read-write STATUS current DESCRIPTION "Currently configured radio band" ::={carrierConfigEntry 2} carrierTxPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Transmit power for the carrier in dBm" ::={carrierConfigEntry 3} carrierRxPowerTarget OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Desired receive power level in dBm. For point to point links bhsTxPowerControl must be enabled on the BHM for this level to be targetted." ::={carrierConfigEntry 4} componentCarrierConfig OBJECT-TYPE SYNTAX SEQUENCE OF ComponentCarrierConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Canopy V component carrier configuration table" ::= {whispBoxRFConfig 3} componentCarrierConfigEntry OBJECT-TYPE SYNTAX ComponentCarrierConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Canopy V component carrier configuration table entry" INDEX {componentCarrierTableIndex} ::= {componentCarrierConfig 1} ComponentCarrierConfigEntry ::= SEQUENCE{ componentCarrierTableIndex INTEGER, componentCarrierAssignment INTEGER, componentCarrierFrequency INTEGER } componentCarrierTableIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the Canopy V component carrier config table" ::={componentCarrierConfigEntry 1} componentCarrierAssignment OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The carrier assignment of the component carrier. Assign the component carrier to a carrier before setting the component carrier frequency. Canopy V only. SM read only." ::={componentCarrierConfigEntry 2} componentCarrierFrequency OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency of component carrier in kHz. Canopy V only. SM read only." ::={componentCarrierConfigEntry 3} cbsdCpiEncodedData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The CPI installation data encoded and signed using JOSE JSON web signature. JOSE compact serialization should be used by concatenating the protectedHeader, encodedCpiSignedData and digitalSignature fields with '.'" ::={whispBoxCbrsConfig 1} cbsdLatitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Latitude of the CBSD in decimal degrees." ::={whispBoxCbrsConfig 2} cbsdLongitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Longitude of the CBSD in decimal degrees." ::={whispBoxCbrsConfig 3} cbsdHeight OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The Height of the CBSD in Meters." ::={whispBoxCbrsConfig 4} cbsdHeightType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "AGL or AMSL. AGL height is measured relative to the ground level and AMSL height is measured relative to the mean sea level." ::={whispBoxCbrsConfig 5} cbsdHorizontalAccuracy OBJECT-TYPE SYNTAX INTEGER UNITS "Meters" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the accuracy of the CBSD antenna horizontal location. As per FCC requirement it should be less than 50 meters." ::={whispBoxCbrsConfig 6} cbsdVerticalAccuracy OBJECT-TYPE SYNTAX INTEGER UNITS "Meters" MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the accuracy of the CBSD antenna vertical location. As per FCC requirement it should be less than 3 meters." ::={whispBoxCbrsConfig 7} cbsdAntennaAzimuth OBJECT-TYPE SYNTAX INTEGER UNITS "Degree" MAX-ACCESS read-only STATUS current DESCRIPTION "Boresight direction of the horizontal plane of the antenna in degrees with respect to true north. A value of 0 degrees means true north; a value of 90 degrees means east." ::={whispBoxCbrsConfig 8} cbsdAntennaDownTilt OBJECT-TYPE SYNTAX INTEGER UNITS "Degree" MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna downtilt in degrees. A negative value means the antenna is tilted up (above horizontal)." ::={whispBoxCbrsConfig 9} cbsdAntennaGain OBJECT-TYPE SYNTAX INTEGER UNITS "dBi" MAX-ACCESS read-only STATUS current DESCRIPTION "Peak antenna gain in dBi." ::={whispBoxCbrsConfig 10} cbsdAntennaBeamwidth OBJECT-TYPE SYNTAX INTEGER UNITS "Degree" MAX-ACCESS read-only STATUS current DESCRIPTION "3 dB antenna beamwidth of the antenna in the horizontal-plane in degrees. This can be specified only if an external antenna is used. Note: A value of 360 (degrees) means the antenna has an omnidirectional radiation pattern in the horizontal plane." ::={whispBoxCbrsConfig 11} cbsdEirpCapability OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum EIRP the radio is capable of." ::={whispBoxCbrsConfig 12} cbsdCpiInstallerId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ID of the Certified Professional Installer who installed the radio." ::={whispBoxCbrsConfig 13} cbsdCpiInstallerName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the Certified Professional Installer who installed the radio." ::={whispBoxCbrsConfig 14} cbsdCpiInstallCertTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Time at which the Certified Professional Installer certified the radio installation parameters" ::={whispBoxCbrsConfig 15} gpsTrackingMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS tracking mode. Available for AP and MicroPop as SM" ::={whispBoxGPS 1} gpsTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS time. Available for AP and MicroPop as SM" ::={whispBoxGPS 2} gpsDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS date. Available for AP and MicroPop as SM" ::={whispBoxGPS 3} gpsSatellitesTracked OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns Current number of satellites GPS is tracking in string format. Use gpsSatellitesTrackedInt to get the value in integer. Available for AP and MicroPop as SM" ::={whispBoxGPS 4} gpsSatellitesTrackedInt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of satellites GPS is tracking in integer format. Available for AP and MicroPop as SM" ::={whispBoxGPS 5} gpsSatellitesVisible OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Return Number of satellites GPS is seeing in string format. Use gpsSatellitesVisibleInt to get value in integer. Available for AP and MicroPop as SM" ::={whispBoxGPS 6} gpsSatellitesVisibleInt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of satellites the GPS sees in integer format. Available for AP and MicroPop as SM" ::={whispBoxGPS 7} gpsHeight OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS height. Available for AP and MicroPop as SM" ::={whispBoxGPS 8} gpsLatitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Latitude. Available for AP and MicroPop as SM" ::={whispBoxGPS 9} gpsLongitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Longitude. Available for AP and MicroPop as SM" ::={whispBoxGPS 10} gpsInvalidMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of invalid messages. Available for AP and MicroPop as SM" ::={whispBoxGPS 11} gpsReceiverInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string contains information on GPS receiver. Available for AP and MicroPop as SM" ::={whispBoxGPS 12} uGPSPower OBJECT-TYPE SYNTAX INTEGER { off(0), on(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable aux port power to Universal GPS module (UGPS capable radios only, when GPS_output_enable is NOT set)." ::={whispBoxGPS 13} gnssSearchMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set the GNSS search mode on applicable platforms. This is a + separate string of possible names GPS, GLONASS, Galileo, and Beidou. For example, setting to GPS+GLONASS+Galileo will enable GPS GLONASS, and Galileo systems while GPS will only enable GPS system. Note that some of these may be rejected if they are not allowed due to regulatory reasons." ::={whispBoxGPS 14} gnssDataSourceOverride OBJECT-TYPE SYNTAX INTEGER { auto(0), igps(1), ugps(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set the default GNSS Data source for this device. 0 = Automatic: let radio algorithm choose the data source 1 = iGPS: use only internal GPS data source 2 = UGPS: use only external UGPS or cnPulse source" ::={whispBoxGPS 15} gpsSatellitesUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Returns Current number of satellites GPS is used for fix in string format. Use gpsSatellitesUsedInt to get the value in integer. Available for AP and MicroPop as SM" ::={whispBoxGPS 16} gpsSatellitesUsedInt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of satellites GPS is used for fix in integer format. Available for AP and MicroPop as SM" ::={whispBoxGPS 17} whispBoxBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge table." ::= {whispBox 4} whispBoxBridgeEntry OBJECT-TYPE SYNTAX WhispBoxBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge entry." INDEX {whispBridgeMacAddr} ::= {whispBoxBridgeTable 1} WhispBoxBridgeEntry ::= SEQUENCE{ whispBridgeMacAddr MacAddress, whispBridgeDesLuid WhispLUID, whispBridgeAge INTEGER, whispBridgeExt INTEGER, whispBridgeHash INTEGER, whispBridgeCAM INTEGER, whispBridge802OneXStatus DisplayString } whispBridgeMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address of the registered entity." ::={whispBoxBridgeEntry 1} whispBridgeDesLuid OBJECT-TYPE SYNTAX WhispLUID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Local Unit Identifier assigned to Subscriber Modems." ::={whispBoxBridgeEntry 2} whispBridgeAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Table entry last access age in minutes." ::={whispBoxBridgeEntry 3} whispBridgeExt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Timeout extension flag for entries which also reside in the PNA APR cache." ::={whispBoxBridgeEntry 4} whispBridgeHash OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Hash table array index." ::={whispBoxBridgeEntry 5} whispBridge802OneXStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "802.1x Authentication Status" ::={whispBoxBridgeEntry 6} whispBridgeCAM OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This entry is deprecated." ::={whispBoxBridgeEntry 7} whispVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN member table." ::= {whispBox 8} whispVLANEntry OBJECT-TYPE SYNTAX WhispVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN entry." INDEX {whispVID} ::= {whispVLANTable 1} WhispVLANEntry ::= SEQUENCE{ whispVID INTEGER, whispVType DisplayString, whispVAge INTEGER } whispVID OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN member ID." ::={whispVLANEntry 1} whispVType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN member type." ::={whispVLANEntry 2} whispVAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN member age." ::={whispVLANEntry 3} whispVLANRemarkTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispVLANRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Active VLAN Remarking table." ::= {whispBox 17} whispVLANRemarkEntry OBJECT-TYPE SYNTAX WhispVLANRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Remarking VLAN entry." INDEX {sourceVID} ::= {whispVLANRemarkTable 1} WhispVLANRemarkEntry ::= SEQUENCE{ sourceVID INTEGER, remarkVIDState DisplayString, remarkVID INTEGER, remarkPriorityState DisplayString, remarkPriority INTEGER } sourceVID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Source VLAN ID." ::={whispVLANRemarkEntry 1} remarkVIDState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Remark VID State." ::={whispVLANRemarkEntry 2} remarkVID OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "Remark VID." ::={whispVLANRemarkEntry 3} remarkPriorityState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Remark Priority State." ::={whispVLANRemarkEntry 4} remarkPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Remark Priority." ::={whispVLANRemarkEntry 5} whispL3PVIDMapTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispL3PVIDMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Active VLAN L3 port VID Mapping table." ::= {whispBox 20} whispL3PVIDMapEntry OBJECT-TYPE SYNTAX WhispL3PVIDMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "L3 Port VID Mapping entry." INDEX {l3PVIDIpAddress} ::= {whispL3PVIDMapTable 1} WhispL3PVIDMapEntry ::= SEQUENCE{ l3PVIDIpAddress IpAddress, l3PVIDMapKey INTEGER, l3PVIDNetmask IpAddress, l3PVIDMapVlan INTEGER, l3PVIDPriorityMode INTEGER, l3PVIDPriority INTEGER } l3PVIDMapKey OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "L3 PVID Mapping Key." ::={whispL3PVIDMapEntry 1} l3PVIDIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "L3 PVID IP Address." ::={whispL3PVIDMapEntry 2} l3PVIDNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "L3 PVID IP Netmask." ::={whispL3PVIDMapEntry 3} l3PVIDMapVlan OBJECT-TYPE SYNTAX INTEGER (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "L3 PVID Mapping VLAN." ::={whispL3PVIDMapEntry 4} l3PVIDPriorityMode OBJECT-TYPE SYNTAX INTEGER (0..1) MAX-ACCESS read-only STATUS current DESCRIPTION "L3 PVID Mapping Priority mode." ::={whispL3PVIDMapEntry 5} l3PVIDPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "L3 PVID Mapping Priority." ::={whispL3PVIDMapEntry 6} whispUserTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User information table." ::= {whispBox 10} whispUserEntry OBJECT-TYPE SYNTAX WhispUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User entry." INDEX {entryIndex} ::= {whispUserTable 1} WhispUserEntry ::= SEQUENCE{ entryIndex INTEGER, userLoginName DisplayString, userPswd DisplayString, accessLevel INTEGER, loginStatus INTEGER, loginMethod INTEGER, sessionTime INTEGER } entryIndex OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "User information table index." ::={whispUserEntry 1} userLoginName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User name." ::={whispUserEntry 2} userPswd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User password." ::={whispUserEntry 3} accessLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "User access level." ::={whispUserEntry 4} loginStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "User current status." ::={whispUserEntry 5} loginMethod OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "User login method." ::={whispUserEntry 6} sessionTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Users logged in session time." ::={whispUserEntry 7} whispLayer2NeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispLayer2NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Neighbor information table." ::= {whispBox 11} whispLayer2NeighborEntry OBJECT-TYPE SYNTAX WhispLayer2NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Neighbor Entry." INDEX {entryL2Index} ::= {whispLayer2NeighborTable 1} WhispLayer2NeighborEntry ::= SEQUENCE{ entryL2Index INTEGER, neighborMAC DisplayString, neighborIP DisplayString, neighborSiteName DisplayString } entryL2Index OBJECT-TYPE SYNTAX INTEGER (1..20) MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor information table index." ::={whispLayer2NeighborEntry 1} neighborMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor MAC." ::={whispLayer2NeighborEntry 2} neighborIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor IP." ::={whispLayer2NeighborEntry 3} neighborSiteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor Site Name." ::={whispLayer2NeighborEntry 4} END