-- IBM AUTOMATION QUERY MIB Rev 0.1  
--      "Initial MIB release for IBM Automation Query"

-- Jose Miranda
-- IBM


IBM-AUTOMATION-QUERY-MIB
        DEFINITIONS ::= BEGIN

        IMPORTS
                OBJECT-TYPE
                        FROM RFC-1212
                enterprises
                        FROM RFC1155-SMI
                DisplayString
                        FROM SNMPv2-TC
                ;
-- Module identification.

-- Textual Conventions

UShortReal ::= INTEGER (0..'ffff'h)
-- This textual convention can be used to represent short
-- unsigned 'real' numbers.  Using this variable type,
-- a 3 digit number with 2 decimal places (xxx.xx)
-- can be represented.  For example, 321.45 would be
-- represented as "32145"

CimDateTime ::= OCTET STRING (SIZE (24))
-- This textual convention can be used to represent a date
-- and time using the CIM DateTime convention.  The bytes are
-- as follows:

--      octets  contents                range
--      ======  ========                =====
--      1-4     year                    0000-9999
--      5-6     month                   01-12
--      7-8     day                     01-31
--      9-10    hour                    00-23
--      11-12   minute                  00-59
--      13-14   second                  00-59
--      15-20   microseconds            000000-999999
--      21      sign                    '+' or '-'
--      22-24   UTC offset in minutes   000-839

-- For example, Monday, May 25, 1998, at 1:30:15 PM EST would be
-- represented as  19980525133015000000-300

-- Note that values must be zero-padded so that the entire
-- string is always the same 25-character length.  Fields that
-- are not significant can be replaced with asterisk characters

UINT64 ::= OCTET STRING (SIZE (8))
-- This textual convention can be used to represent 64-bit
-- numbers using the OCTET STRING type.  SNMPv2 supports a
-- Counter64 type, but there is no C-language mapping for a
-- 64-bit variable that's much better than an array of 8 bytes

-- Integer32 ::= INTEGER (0..'7fffffff'h)
-- UINT16 ::= INTEGER (0..'ffff'h)

-- MIB Fields


ibm OBJECT IDENTIFIER  ::= { enterprises 2 }

ibmProd OBJECT IDENTIFIER        ::= { ibm 6 }

ibmQueryConfig OBJECT IDENTIFIER        ::= { ibmProd 257 }


ibmQueryConfigRoot OBJECT IDENTIFIER ::= { ibmQueryConfig 1 }


ibmQueryConfigMibVersion   OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 4  ) ) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION
        "This string contains version information for the MIB file"
    ::=  {  ibmQueryConfigRoot  1  }
        
libraryconfigGroup    OBJECT IDENTIFIER
    ::=  {  ibmQueryConfigRoot  2  }  
 
Library-Configuration-Table  ::=  SEQUENCE {
    libraryConfiguration-NumberofChasis INTEGER,
    libraryConfiguration-NumOfLogLib   INTEGER,
    libraryConfiguration-NumOfStes  INTEGER,
    libraryConfiguration-NumOfDtes  INTEGER,
        libraryConfiguration-NumOfIEEs  INTEGER,
    libraryConfiguration-VIOEnabled  INTEGER,
    libraryConfiguration-LTOEncryptionLicensed  INTEGER,
    libraryConfiguration-PFLicensed  INTEGER,
    libraryConfiguration-SSLEnabled  INTEGER,
        libraryConfiguration-AutoClean  INTEGER,
    libraryConfiguration-LDAP  INTEGER,
    libraryConfiguration-LDAPPrimaryURI  DisplayString,
    libraryConfiguration-LDAPSecondaryURI  DisplayString,
    libraryConfiguration-LDAPGroupDN  DisplayString,
        libraryConfiguration-LDAPUserDN   DisplayString,
        libraryConfiguration-LDAPStartTLS INTEGER,
        libraryConfiguration-KerberosEnabled INTEGER,
        libraryConfiguration-KerberosRealm DisplayString,
        libraryConfiguration-KerberosDomainMap DisplayString,
        libraryConfiguration-KerberosKeyTab DisplayString,
        libraryConfiguration-TimeConfigured INTEGER,
        libraryConfiguration-TimeNTPEnabled INTEGER,
        libraryConfiguration-TimePrimaryNTPServer DisplayString,
        libraryConfiguration-TimeSecondaryNTPServer DisplayString,
        libraryConfiguration-TimeTimeZone DisplayString,
        libraryConfiguration-PwdRulesAutoLogout INTEGER,
        libraryConfiguration-PwdLockAttempts INTEGER,
        libraryConfiguration-PwdMinimumLength INTEGER,
        libraryConfiguration-PwdMinUpperCase INTEGER,
        libraryConfiguration-PwdMinLowerCase INTEGER,
        libraryConfiguration-PwdRulesMinNumericChars INTEGER,
        libraryConfiguration-PwdRulesMinSpecialChars INTEGER,
        libraryConfiguration-PwdRulesMaxSameChars INTEGER,
        libraryConfiguration-PwdRulesPwdMinAge INTEGER,
        libraryConfiguration-PwdRulesPwdMaxAge INTEGER,
        libraryConfiguration-SMTP INTEGER,
        libraryConfiguration-SMTPServerAddress DisplayString,
        libraryConfiguration-SMTPAuthentication INTEGER,
        libraryConfiguration-SNMP INTEGER,
        libraryConfiguration-CallHome INTEGER       
    }   
 
 
 
    
libraryconfigTable  OBJECT-TYPE
    SYNTAX      SEQUENCE  OF  Library-Configuration-Table
    ACCESS  not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "A MediaAccessDevice represents the ability to access one
        or more media and use this media to store and retrieve data."
    ::=  { libraryconfigGroup  1 }      
    
                        

libraryConfigEntry  OBJECT-TYPE
    SYNTAX      Library-Configuration-Table
    ACCESS  not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "Each entry in the table contains information about the configuration of the library."
    INDEX       {  libraryConfiguration-NumberofChasis  }
    ::=  { libraryconfigTable 1 }


libraryConfiguration-NumberofChasis    OBJECT-TYPE 
    SYNTAX           INTEGER (0..'7fffffff'h)
    ACCESS      read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number of Chasis in the Library."
    ::=  {  libraryConfigEntry  1  }
        
        
libraryConfiguration-NumOfLogLib    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS      read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number of Logical Libraries in the Library"
    ::=  {  libraryConfigEntry  2  }    
        
libraryConfiguration-NumOfStes    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS      read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number of Storage Element address in the Library"
    ::=  {  libraryConfigEntry  3  }

libraryConfiguration-NumOfDtes    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS      read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number of Data Transport Elements in the Library"
    ::=  {  libraryConfigEntry  4  }
        
libraryConfiguration-NumOfIEEs    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS         read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number of Import Export Element in the Library"
    ::=  {  libraryConfigEntry  5  }
        
libraryConfiguration-VIOEnabled    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Virtual I/O Enabled flag"
    ::=  {  libraryConfigEntry  6  }
        
libraryConfiguration-LTOEncryptionLicensed    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "LTO Encryption Licensed flag"
    ::=  {  libraryConfigEntry  7  }
        
libraryConfiguration-PFLicensed    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Path Failover Licensed flag"
    ::=  {  libraryConfigEntry  8  }
        
libraryConfiguration-SSLEnabled    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "WEB SSL Enabled flag"
    ::=  {  libraryConfigEntry  9  }
        
libraryConfiguration-AutoClean    OBJECT-TYPE 
   SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Auto Clean Enabled flag"
    ::=  {  libraryConfigEntry  10  }
        
libraryConfiguration-LDAP    OBJECT-TYPE 
   SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "LDAP Enabled flag"
    ::=  {  libraryConfigEntry  11  }
        
libraryConfiguration-LDAPPrimaryURI    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "LDAP Primary URI"
    ::=  {  libraryConfigEntry  12  }
        
libraryConfiguration-LDAPSecondaryURI    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "LDAP Secondary URI"
    ::=  {  libraryConfigEntry  13  }
        
libraryConfiguration-LDAPGroupDN    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "LDAP Group Domain Name"
    ::=  {  libraryConfigEntry  14  }

libraryConfiguration-LDAPUserDN    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "LDAP User Domain Name"
    ::=  {  libraryConfigEntry  15  }
        
libraryConfiguration-LDAPStartTLS    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "LDAP Start TLS flag."
    ::=  {  libraryConfigEntry  16  }

libraryConfiguration-KerberosEnabled    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Kerberos Enabled flag."
    ::=  {  libraryConfigEntry  17  }
        
libraryConfiguration-KerberosRealm   OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Kerberos Realm."
    ::=  {  libraryConfigEntry  18  }

libraryConfiguration-KerberosDomainMap    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Kerberos Domain Map."
    ::=  {  libraryConfigEntry  19  }   
        
libraryConfiguration-KerberosKeyTab    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Kerberos Key Tab."
    ::=  {  libraryConfigEntry  20  }   
        
libraryConfiguration-TimeConfigured    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Time Configured flag.This flag indicates if the time is configured manually."
    ::=  {  libraryConfigEntry  21  }
        
libraryConfiguration-TimeNTPEnabled    OBJECT-TYPE 
   SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "NTP enabled flag."
    ::=  {  libraryConfigEntry  22  }   
        
        
libraryConfiguration-TimePrimaryNTPServer    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Primary NTP Server."
    ::=  {  libraryConfigEntry  23  }   
        
libraryConfiguration-TimeSecondaryNTPServer    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Secondary NTP Server."
    ::=  {  libraryConfigEntry  24  }   
        
libraryConfiguration-TimeTimeZone    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "NTP Time Zone."
    ::=  {  libraryConfigEntry  25  }   
        
libraryConfiguration-PwdRulesAutoLogout    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "WEB Auto Log Out flag."
    ::=  {  libraryConfigEntry  26  }   

libraryConfiguration-PwdLockAttempts    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number of attempts before pasword is locked."
    ::=  {  libraryConfigEntry  27  }

libraryConfiguration-PwdMinimumLength    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Minimum Length."
    ::=  {  libraryConfigEntry  28  }


libraryConfiguration-PwdMinUpperCase    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Minimum Upper Case."
    ::=  {  libraryConfigEntry  29  }
        

libraryConfiguration-PwdMinLowerCase    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Minimum Upper Case."
    ::=  {  libraryConfigEntry  30  }   
        
        
libraryConfiguration-PwdRulesMinNumericChars    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Minimum Number of characters."
    ::=  {  libraryConfigEntry  31  }
        
libraryConfiguration-PwdRulesMinSpecialChars    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Minimum Number of Special characters."
    ::=  {  libraryConfigEntry  32  }

        
libraryConfiguration-PwdRulesMaxSameChars    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Maximum number of same identical charaters."
    ::=  {  libraryConfigEntry  33  }   
        
        
libraryConfiguration-PwdRulesPwdMinAge    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Minimum Age."
    ::=  {  libraryConfigEntry  34  }   
        
libraryConfiguration-PwdRulesPwdMaxAge    OBJECT-TYPE 
    SYNTAX           INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Password Maximum Age."
    ::=  {  libraryConfigEntry  35  }   
                        
libraryConfiguration-SMTP    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "SMTP Enabled flag."
    ::=  {  libraryConfigEntry  36  }           

libraryConfiguration-SMTPServerAddress    OBJECT-TYPE 
    SYNTAX           DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "SMTP Server Address."
    ::=  {  libraryConfigEntry  37  }

libraryConfiguration-SMTPAuthentication    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "SMTP Authentication flag."
    ::=  {  libraryConfigEntry  38  }

libraryConfiguration-SNMP   OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "SNMP Enabled flag."
    ::=  {  libraryConfigEntry  39  }   

libraryConfiguration-CallHome    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Call Home Enabled flag."
    ::=  {  libraryConfigEntry  40  }   
                
                
frameconfigGroup    OBJECT IDENTIFIER
    ::=  {  ibmQueryConfigRoot  3  }

numberOfPossibleChassis  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "This value specifies the number of Possible frames that could be present."
    ::=  {  frameconfigGroup  1  }
        
frameconfigTable  OBJECT-TYPE
    SYNTAX      SEQUENCE  OF  Chassis-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "A MediaAccessDevice represents the ability to access one
        or more media and use this media to store and retrieve data."
    ::=  { frameconfigGroup  2 }        
        
frameConfigEntry  OBJECT-TYPE
    SYNTAX      Chassis-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "Each entry in the table contains information about each
        Frame that is present in the library."
    INDEX       {  chassis-Index  }
    ::=  { frameconfigTable 1 }

Chassis-Configuration-Table  ::=  SEQUENCE {
    chassis-Index  INTEGER ,
    chassis-Type   INTEGER,
    chassis-PS1Status  INTEGER,
    chassis-PS2Status  INTEGER,       
    chassis-PSredundancy INTEGER,
    chassis-NumberofInstalledDrives  INTEGER,
    chassis-IOType  INTEGER,
    chassis-NumofIOLocations  INTEGER,
    chassis-LicensedCap  INTEGER,
        chassis-SerialNumber  DisplayString,
    chassis-GroupWWNN  DisplayString,
    chassis-MaxAvailCap  INTEGER,
    chassis-PortAEthernetEnabled  INTEGER,
    chassis-PortAEthernetIP  DisplayString,
        chassis-PortAGW DisplayString,
        chassis-PortANetmask DisplayString,
        chassis-PortAEthernetIPv6Enabled  INTEGER,
    chassis-PortAEthernetv6IP  DisplayString,
        chassis-PortAIPv6Netmask DisplayString,
        chassis-PortAIPv6GW DisplayString,
        chassis-PortBEthernetEnabled  INTEGER,
    chassis-PortBEthernetIP  DisplayString,
        chassis-PortBNetmask DisplayString,
        chassis-PortBGW DisplayString,
        chassis-PortBEthernetIPv6Enabled  INTEGER,
    chassis-PortBEthernetv6IP  DisplayString,
        chassis-PortBIPv6GW DisplayString,
        chassis-PortBIPv6Netmask DisplayString
    }   
        
chassis-Index    OBJECT-TYPE 
    SYNTAX           INTEGER (0..'7fffffff'h)
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Index to a Physical Frame"
    ::=  {  frameConfigEntry  1  }


chassis-Type  OBJECT-TYPE 
    SYNTAX          INTEGER {
                            lto (1),
                            jaguar (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Physical Frame Type."
    ::=  {  frameConfigEntry  2  }
        
chassis-PS1Status  OBJECT-TYPE 
      SYNTAX        INTEGER {
                            notinstalled (1),
                            installed (2)
                            }   
                            
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Status of the first Power Supply."
    ::=  {  frameConfigEntry  3  }
        
chassis-PS2Status  OBJECT-TYPE 
    SYNTAX        INTEGER {
                            notinstalled (1),   
                            installed (2)
                            }     
                                  
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Status of the second Power Supply."
    ::=  {  frameConfigEntry  4  }      
        
chassis-NumberofInstalledDrives  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number of Installed Drives"
    ::=  {  frameConfigEntry  5  }

        
chassis-IOType  OBJECT-TYPE 
     SYNTAX          INTEGER {
                            none (1),
                            small (2),
                            large (3),
                            fouriodoor (4),
                            magazine (5) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Type of IO Station"
    ::=  {  frameConfigEntry  6  }      
        
chassis-NumofIOLocations  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Number IO Locations in the chassis."
    ::=  {  frameConfigEntry  7  }      
                
chassis-LicensedCap  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Licensed Capacity"
    ::=  {  frameConfigEntry  8  }
        
chassis-SerialNumber  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Library Serial Number"
    ::=  {  frameConfigEntry  9  }      
        
chassis-GroupWWNN  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Library Group WWNN."
    ::=  {  frameConfigEntry  10  }             
        
chassis-MaxAvailCap  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Maximum Available Capacity."
    ::=  {  frameConfigEntry  11  }     

chassis-PortAEthernetEnabled  OBJECT-TYPE 
     SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port A Ethernet Enabled."
    ::=  {  frameConfigEntry  12  }     
        
chassis-PortAEthernetIP  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port A Ethernet Port IP Address."
    ::=  {  frameConfigEntry  13  }     
        
chassis-PortAGW  OBJECT-TYPE 
    SYNTAX          DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port A Ethernet Port IP Gateway."
    ::=  {  frameConfigEntry  14  }     

chassis-PortANetmask  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port A Ethernet Port IP Netmask."
    ::=  {  frameConfigEntry  15  }     
        
chassis-PortAEthernetIPv6Enabled  OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port A IPv6 Ethernet Enabled."
    ::=  {  frameConfigEntry  16  }     
        
chassis-PortAEthernetv6IP  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port A Ethernet Port IPv6 Address."
    ::=  {  frameConfigEntry  17  }     
        
chassis-PortAIPv6Netmask  OBJECT-TYPE 
    SYNTAX          DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port A Ethernet Port IPv6 Netmask."
    ::=  {  frameConfigEntry  18  }     

chassis-PortAIPv6GW  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port A Ethernet Port IPv6 Gateway."
    ::=  {  frameConfigEntry  19  }     
        
chassis-PortBEthernetEnabled  OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port B IPv4 Ethernet Enabled."
    ::=  {  frameConfigEntry  20  }     
        
chassis-PortBEthernetIP  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port B Ethernet Port IPv4 Address."
    ::=  {  frameConfigEntry  21  }     
        
chassis-PortBGW  OBJECT-TYPE 
    SYNTAX          DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port B Ethernet Port IPv4 Gateway."
    ::=  {  frameConfigEntry  22  }     

chassis-PortBNetmask  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port B Ethernet Port IPv4 Netmask."
    ::=  {  frameConfigEntry  23  }     
        
chassis-PortBEthernetIPv6Enabled  OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port B IPv6 Ethernet Enabled."
    ::=  {  frameConfigEntry  24  }     
        
chassis-PortBEthernetv6IP  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port B Ethernet Port IPv6 Address."
    ::=  {  frameConfigEntry  25  }     
        
chassis-PortBIPv6Netmask  OBJECT-TYPE 
    SYNTAX          DisplayString
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port B Ethernet Port IPv6 Netmask."
    ::=  {  frameConfigEntry  26  }     

chassis-PortBIPv6GW  OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Chassis Port B Ethernet Port IPv6 Gateway."
    ::=  {  frameConfigEntry  27  }   
            
chassis-PSredundancy  OBJECT-TYPE 
      SYNTAX        INTEGER {
                            ok (1),
                            notok (2),
                            notapplicable(3)
                            }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Power Supply Redundancy Status."
    ::=  {  frameConfigEntry  28  }
        
        
logicallibraryGroup    OBJECT IDENTIFIER
    ::=  {  ibmQueryConfigRoot  4  }
        
numberOfLogicalLibraries  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "This value specifies the number of logical libraries."
    ::=  {  logicallibraryGroup  1  }
        
logicalLibraryConfigTable  OBJECT-TYPE
    SYNTAX      SEQUENCE  OF  Logical-Library-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "A Logical Library represent a logical partition within the library."
    ::=  { logicallibraryGroup  2 }     
        
logicalLibraryConfigEntry  OBJECT-TYPE
    SYNTAX      Logical-Library-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "Each entry in the table contains information about each
        Logical Library in the library."
    INDEX       {  logicallibrary-LogLibIdx  }
    ::=  { logicalLibraryConfigTable 1 }

Logical-Library-Configuration-Table  ::=  SEQUENCE {
    logicallibrary-LogLibIdx  INTEGER ,
    logicallibrary-StartStEA  INTEGER,
    logicallibrary-EndStEA    INTEGER,
    logicallibrary-StartIEEA  INTEGER,
    logicallibrary-EndIEEA    INTEGER,
    logicallibrary-StartDTEA  INTEGER,
    logicallibrary-EndDTEA    INTEGER,
    logicallibrary-StartMTEA  INTEGER,
    logicallibrary-EndMTEA    INTEGER,
    logicallibrary-MediaType  INTEGER,
    logicallibrary-HideLogLibExportCart  INTEGER,
    logicallibrary-SixCharVolser  INTEGER,
    logicallibrary-Name  DisplayString,
        logicallibrary-EncryptionEnabled  INTEGER,
        logicallibrary-EncryptionSSLEnabled  INTEGER,
        logicallibrary-EncryptionMethod  DisplayString,
        logicallibrary-EncryptionEKMIP-1  DisplayString,
        logicallibrary-EncryptionEKMPort-1  INTEGER,
        logicallibrary-EncryptionEKMIP-2  DisplayString,
        logicallibrary-EncryptionEKMPort-2  INTEGER,
        logicallibrary-EncryptionEKMIP-3  DisplayString,
        logicallibrary-EncryptionEKMPort-3  INTEGER,
        logicallibrary-EncryptionEKMIP-4  DisplayString,
        logicallibrary-EncryptionEKMPort-4  INTEGER
    }
        
logicallibrary-LogLibIdx    OBJECT-TYPE 
    SYNTAX          INTEGER (0..'7fffffff'h) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Logical Library Index."
    ::=  {  logicalLibraryConfigEntry  1  }     
        

logicallibrary-StartStEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Starting Storage Element Address."
    ::=  {  logicalLibraryConfigEntry  2  }
        
logicallibrary-EndStEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Ending Storage Element Address."
    ::=  {  logicalLibraryConfigEntry  3  }
        
logicallibrary-StartIEEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Starting Import Export Element Address."
    ::=  {  logicalLibraryConfigEntry  4  }
        
logicallibrary-EndIEEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Ending Import Export Element Address."
    ::=  {  logicalLibraryConfigEntry  5  }
        
logicallibrary-StartDTEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Starting Data Transfer Element Address."
    ::=  {  logicalLibraryConfigEntry  6  }     
        
logicallibrary-EndDTEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Ending Data Transfer Element Address."
    ::=  {  logicalLibraryConfigEntry  7  }
        
logicallibrary-StartMTEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Starting Medium transport Element Address."
    ::=  {  logicalLibraryConfigEntry  8  }
        
logicallibrary-EndMTEA    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Ending Medium transport Element Address."
    ::=  {  logicalLibraryConfigEntry  9  }
        
logicallibrary-MediaType    OBJECT-TYPE 
     SYNTAX          INTEGER {
                            lto (1),
                            jaguar (2) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Logical Library Media Type."
    ::=  {  logicalLibraryConfigEntry  10  }
        
logicallibrary-HideLogLibExportCart    OBJECT-TYPE 
     SYNTAX          INTEGER {
                            true (1),
                            false (2) } 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Hide Logical Library Export Flag."
    ::=  {  logicalLibraryConfigEntry  11  }
        
logicallibrary-SixCharVolser    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) } 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Six Character Volser Flag"
    ::=  {  logicalLibraryConfigEntry  12  }
        
logicallibrary-Name    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )  
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Logical Library Name."
    ::=  {  logicalLibraryConfigEntry  13  }
        
logicallibrary-EncryptionEnabled    OBJECT-TYPE 
     SYNTAX          INTEGER {
                            true (1),
                            false (2) }   
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption Enabled flag."
    ::=  {  logicalLibraryConfigEntry  14  }    

logicallibrary-EncryptionSSLEnabled    OBJECT-TYPE 
     SYNTAX          INTEGER {
                            true (1),
                            false (2) } 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption SSL Enabled flag."
    ::=  {  logicalLibraryConfigEntry  15  }    

logicallibrary-EncryptionMethod    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption Method."
    ::=  {  logicalLibraryConfigEntry  16  }
        
logicallibrary-EncryptionEKMIP-1    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM IP for index 1."
    ::=  {  logicalLibraryConfigEntry  17  }

logicallibrary-EncryptionEKMPort-1    OBJECT-TYPE 
    SYNTAX          INTEGER    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM Port for index 1."
    ::=  {  logicalLibraryConfigEntry  18  }

logicallibrary-EncryptionEKMIP-2    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM IP for index 2."
    ::=  {  logicalLibraryConfigEntry  19  }

logicallibrary-EncryptionEKMPort-2    OBJECT-TYPE 
    SYNTAX          INTEGER    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM Port for index 2."
    ::=  {  logicalLibraryConfigEntry  20  }

logicallibrary-EncryptionEKMIP-3    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM IP for index 3."
    ::=  {  logicalLibraryConfigEntry  21  }

logicallibrary-EncryptionEKMPort-3    OBJECT-TYPE 
    SYNTAX          INTEGER    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM Port for index 3."
    ::=  {  logicalLibraryConfigEntry  22  }

logicallibrary-EncryptionEKMIP-4    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) )    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM IP for index 4."
    ::=  {  logicalLibraryConfigEntry  23  }

logicallibrary-EncryptionEKMPort-4    OBJECT-TYPE 
    SYNTAX          INTEGER    
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Encryption EKM Port index 4."
    ::=  {  logicalLibraryConfigEntry  24  }    
        

        
driveConfigurationGroup    OBJECT IDENTIFIER
    ::=  {  ibmQueryConfigRoot  5  }

numberOfPossibleDrives  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "This value specifies of possible drives."
    ::=  {  driveConfigurationGroup  1  }
        
driveConfigTable  OBJECT-TYPE
    SYNTAX      SEQUENCE  OF  Drive-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "A drive represent a data transfer device within a library."
    ::=  { driveConfigurationGroup  2 } 
        
driveConfigEntry  OBJECT-TYPE
    SYNTAX      Drive-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "Each entry in the table contains information about each
        drive in the library."
    INDEX       {  mediaAccessDevice-Index  }
    ::=  { driveConfigTable 1 }

Drive-Configuration-Table  ::=  SEQUENCE {
    mediaAccessDevice-Index                            INTEGER,
    mediaAccessDevice-FrameIdx                         INTEGER,
    mediaAccessDevice-ColumnIdx                        INTEGER,
    mediaAccessDevice-RowIdx                           INTEGER,
    mediaAccessDevice-LogLib                           INTEGER,
    mediaAccessDevice-VEA                              INTEGER,
    mediaAccessDevice-Installed                        INTEGER,
        mediaAccessDevice-IsControlPath                    INTEGER,
        mediaAccessDevice-DriveType                        INTEGER,
        mediaAccessDevice-DriveGeneration                  INTEGER,
        mediaAccessDevice-Port0ID                         INTEGER,
        mediaAccessDevice-Port1ID                         INTEGER,
        mediaAccessDevice-Port0State                      INTEGER,
        mediaAccessDevice-Port1State                      INTEGER,
        mediaAccessDevice-Port0Speed                      INTEGER,
        mediaAccessDevice-Port1Speed                      INTEGER,
        mediaAccessDevice-Port0Topology                   INTEGER,
        mediaAccessDevice-Port1Topology                   INTEGER,
        mediaAccessDevice-Port0SpeedActual               INTEGER,
        mediaAccessDevice-Port1SpeedActual               INTEGER,
        mediaAccessDevice-Port0TopologyActual            INTEGER,
        mediaAccessDevice-Port1TopologyActual            INTEGER,
        mediaAccessDevice-RevisionLevel                   DisplayString,
        mediaAccessDevice-Port0WWPN                        DisplayString,
        mediaAccessDevice-Port1WWPN                       DisplayString,
        mediaAccessDevice-AssignedWWN                      DisplayString
    }   
        
mediaAccessDevice-Index    OBJECT-TYPE 
    SYNTAX           INTEGER (0..'7fffffff'h)
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Table Index"
    ::=  {  driveConfigEntry  1  }      
        
mediaAccessDevice-FrameIdx    OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Frame Index."
    ::=  {  driveConfigEntry  2  }              
        
mediaAccessDevice-ColumnIdx    OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Column Index."
    ::=  {  driveConfigEntry  3  }              
        
mediaAccessDevice-RowIdx    OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Row Index."
    ::=  {  driveConfigEntry  4  }              
        
        
mediaAccessDevice-LogLib    OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Logical Library."
    ::=  {  driveConfigEntry  5  }      
        
mediaAccessDevice-VEA    OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Virtual Element Address."
    ::=  {  driveConfigEntry  6  }              
        

        
mediaAccessDevice-Installed    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) } 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Boolean set to true if the drive is installed."
    ::=  {  driveConfigEntry  7  }      

        
mediaAccessDevice-IsControlPath    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            true (1),
                            false (2) } 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Boolean set to TRUE if the drive is a control path drive."
    ::=  {  driveConfigEntry  8  }      

mediaAccessDevice-DriveType    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            lto (1),
                            jaguar (2) }  
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive type."
    ::=  {  driveConfigEntry  9  }

mediaAccessDevice-DriveGeneration    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Generation."
    ::=  {  driveConfigEntry  10  }     
        
        
        
mediaAccessDevice-Port0ID    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 0 ID."
    ::=  {  driveConfigEntry  11  }             
        
        
mediaAccessDevice-Port1ID    OBJECT-TYPE 
    SYNTAX          INTEGER 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 1 ID."
    ::=  {  driveConfigEntry  12  }             

mediaAccessDevice-Port0State    OBJECT-TYPE 
     SYNTAX          INTEGER {
                            nolight (1),
                            lightdetected (2),
                                                        unknown(3)      }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Port 0 Signal State."
    ::=  {  driveConfigEntry  13  }     

mediaAccessDevice-Port1State    OBJECT-TYPE 
   SYNTAX          INTEGER {
                            nolight (1),
                            lightdetected (2),
                                                        unknown(3) }
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Port 1 Signal State."
    ::=  {  driveConfigEntry  14  }             
        
mediaAccessDevice-Port0Speed    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            auto (1),
                            onegbsec (2),
                                                        onedotfive(3),
                                                        twogbbsec (4),
                                                        threegbsec(5),
                                                        fourgbsec (6),
                                                        sixgbsec (7),
                                                        eigthgbsec (8),
                                                        tengbsec(9),
                                                        twelvegbsec(10)
                                                        }  
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 0 Set Speed."
    ::=  {  driveConfigEntry  15  }
        

mediaAccessDevice-Port1Speed    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            auto (1),
                            onegbsec (2),
                                                        onedotfive(3),
                                                        twogbbsec (4),
                                                        threegbsec(5),
                                                        fourgbsec (6),
                                                        sixgbsec (7),
                                                        eigthgbsec (8),
                                                        tengbsec(9),
                                                        twelvegbsec(10)} 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 1 Set Speed."
    ::=  {  driveConfigEntry  16  }     
        
        
mediaAccessDevice-Port0Topology    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            auto-l (1),
                            l (2),
                                                        n (3),
                                                        auto-n (4),
                                                        notapplicable(5)}
                                                         
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 0 Set Topology"
    ::=  {  driveConfigEntry  17  }     
        
mediaAccessDevice-Port1Topology    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            auto-L (1),
                            l (2),
                                                        n (3),
                                                        auto-n (4),
                                                        notapplicable(5)}
                                                         
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 1 Set Topology"
    ::=  {  driveConfigEntry  18  }             
        

        
mediaAccessDevice-Port0SpeedActual    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            onegbsec (1),
                                                        onedotfive(2),
                                                        twogbbsec (3),
                                                        threegbsec(4),
                                                        fourgbsec (5),
                                                        sixgbsec (6),
                                                        eigthgbsec (7),
                                                        tengbsec(8),
                                                        twelvegbsec(9),
                                                        unknown(10)}  
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 0 Actual Speed."
    ::=  {  driveConfigEntry  19  }     

mediaAccessDevice-Port1SpeedActual    OBJECT-TYPE 
    SYNTAX          INTEGER {                         
                            onegbsec (1),
                                                        onedotfive(2),
                                                        twogbbsec (3),
                                                        threegbsec(4),
                                                        fourgbsec (5),
                                                        sixgbsec (6),
                                                        eigthgbsec (7),
                                                        tengbsec(8),
                                                        twelvegbsec(9),
                                                        unknown(10)}  
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 1 Actual Speed."
    ::=  {  driveConfigEntry  20  }     

mediaAccessDevice-Port0TopologyActual   OBJECT-TYPE 
    SYNTAX          INTEGER {
                            l (1),
                                                        n (2),
                                                        unknown(3),
                                                        notapplicable(4)}
                                                        
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 0 Actual Topology."
    ::=  {  driveConfigEntry  21  }     

mediaAccessDevice-Port1TopologyActual    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            l (1),
                                                        n (2),
                                                        unknown(3),
                                                        notapplicable(4)}
                                                        
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Port 2 Actual Topology."
    ::=  {  driveConfigEntry  22  }             



mediaAccessDevice-RevisionLevel    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 5  ) ) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Revision Level."
    ::=  {  driveConfigEntry  23  }             
        
        
mediaAccessDevice-Port0WWPN    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 9  ) ) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Port 0 World Wide Port Name."
    ::=  {  driveConfigEntry  24  }             

mediaAccessDevice-Port1WWPN    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 9  ) ) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Port 1 World Wide Port Name."
    ::=  {  driveConfigEntry  25  }                     
        
mediaAccessDevice-AssignedWWN    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 20  ) ) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "Drive Assigned World Wide Node Name."
    ::=  {  driveConfigEntry  26  }


userConfigurationGroup    OBJECT IDENTIFIER
    ::=  {  ibmQueryConfigRoot  6  }

numberOfUsers  OBJECT-TYPE 
    SYNTAX          INTEGER
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "This value specifies number of users."
    ::=  {  userConfigurationGroup  1  }
        
userConfigTable  OBJECT-TYPE
    SYNTAX      SEQUENCE  OF  User-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "User Configuration Table. "
    ::=  {  userConfigurationGroup  2  }        
        
userConfigEntry  OBJECT-TYPE
    SYNTAX      User-Configuration-Table
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION 
        "Each entry in the table contains information about each
        user in the library."
    INDEX       {  users-Index  }
    ::=  {  userConfigTable 1  }

User-Configuration-Table  ::=  SEQUENCE {
    users-Index                                        INTEGER,
    users-Username                                      DisplayString,
        users-UsernameRole                                  DisplayString,
        users-UsernameActive                                INTEGER  
    }   
        
users-Index    OBJECT-TYPE 
    SYNTAX           INTEGER (0..'7fffffff'h)
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "User Table Index"
    ::=  {  userConfigEntry  1  }       
        
users-Username    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) ) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "User Name"
    ::=  {  userConfigEntry  2  }       
        
users-UsernameRole    OBJECT-TYPE 
    SYNTAX          DisplayString  ( SIZE ( 0 .. 255  ) ) 
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "User Name Role"
    ::=  {  userConfigEntry  3  }
        
users-UsernameActive    OBJECT-TYPE 
    SYNTAX          INTEGER {
                            active (1),
                                                        inactive (2)}
    ACCESS          read-only
    STATUS          mandatory
    DESCRIPTION     
        "User Name Active flag."
    ::=  {  userConfigEntry  4  }       
        
        
endOfQueryConfigMib OBJECT-TYPE 
    SYNTAX          OBJECT IDENTIFIER
    ACCESS          not-accessible
    STATUS          mandatory
    DESCRIPTION     
        "Description here"
    ::=  {  ibmQueryConfigRoot  7  }
    
END