PACKETFLUX-SENSORS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    packetfluxFeatureSpecific
        FROM PACKETFLUX-SMI
    Fixed2DecimalDigits, Fixed6DecimalDigits
        FROM PACKETFLUX-TC
    OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI
    DisplayString, TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    ;

packetfluxSensors MODULE-IDENTITY
    LAST-UPDATED  "202004120559Z" -- April 12, 2020
    ORGANIZATION
        "PacketFlux Technologies"
    CONTACT-INFO
        "custsvc@packetflux.com http://www.packetflux.com"
    DESCRIPTION
        "MIB for generic sensor types found throughout a system"
    REVISION      "202004120559Z" -- April 12, 2020
    DESCRIPTION
        "Added additional functions implemented initially in the
         SiteMonitor Base 3, including a separate Sensor Function column
         on each Sensor Type, and addition of the resistanceSensor
         sensor type"
    REVISION      "201807081126Z" -- July 08, 2018
    DESCRIPTION
        "Initial version of the mib"
    ::= { packetfluxFeatureSpecific 2 }

voltageSensorTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF VoltageSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Sensors which read voltage with units of 'volts'."
    ::= { packetfluxSensors 1 }

voltageSensorEntry OBJECT-TYPE
    SYNTAX        VoltageSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A single entry of the voltageSensor table."
    INDEX
        { voltageSensorSlot, voltageSensorIndex }
    ::= { voltageSensorTable 1 }

VoltageSensorEntry ::= SEQUENCE
{
    voltageSensorSlot        Unsigned32,
    voltageSensorIndex       Unsigned32,
    voltageSensorDescription DisplayString,
    voltageSensorValue       Fixed6DecimalDigits,
    voltageSensorFunction    DisplayString
}


voltageSensorSlot OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The slot which contains the sensor."
    ::= { voltageSensorEntry 1 }

voltageSensorIndex OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The number of the sensor within the slot. This field
         distinguishes between multiple sensors of the same type in the
         same slot, and is used as an index for this table."
    ::= { voltageSensorEntry 2 }

voltageSensorDescription OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Contains a brief description for this sensor.  This
         description may be able to be changed by the user."
    ::= { voltageSensorEntry 3 }

voltageSensorValue OBJECT-TYPE
    SYNTAX        Fixed6DecimalDigits
    UNITS         "V"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of the sensor in volts. Note that this is reported
         from the controller with 6 fixed decimal digits which is enough
         to correctly represent mV and uV ranges. Some SNMP tools will
         automatically put the decimal in the right spot. If not, you
         will need to divide this value by 1,000,000 to get the value in
         Volts."
    ::= { voltageSensorEntry 4 }

voltageSensorFunction OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A human readable description of the function of this sensor."
    ::= { voltageSensorEntry 5 }

currentSensorTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF CurrentSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Sensors which read current with units of 'amps'."
    ::= { packetfluxSensors 2 }

currentSensorEntry OBJECT-TYPE
    SYNTAX        CurrentSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A single entry of the currentSensor table."
    INDEX
        { currentSensorSlot, currentSensorIndex }
    ::= { currentSensorTable 1 }

CurrentSensorEntry ::= SEQUENCE
{
    currentSensorSlot        Unsigned32,
    currentSensorIndex       Unsigned32,
    currentSensorDescription DisplayString,
    currentSensorValue       Fixed6DecimalDigits,
    currentSensorFunction    DisplayString
}


currentSensorSlot OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The slot which contains the sensor."
    ::= { currentSensorEntry 1 }

currentSensorIndex OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The number of the sensor within the slot. This field
         distinguishes between multiple sensors of the same type in the
         same slot, and is used as an index for this table."
    ::= { currentSensorEntry 2 }

currentSensorDescription OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Contains a brief description for this sensor. This may be able
         to be set by the user."
    ::= { currentSensorEntry 3 }

currentSensorValue OBJECT-TYPE
    SYNTAX        Fixed6DecimalDigits
    UNITS         "A"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of the sensor in anps. Note that this is reported
         from the controller with 6 fixed decimal digits which is enough
         to correctly represent mA and uA ranges. Some SNMP tools will
         automatically put the decimal in the right spot. If not, you
         will need to divide this value by 1,000,000 to get the value in
         Amps."
    ::= { currentSensorEntry 4 }

currentSensorFunction OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A human readable description of the function of this sensor."
    ::= { currentSensorEntry 5 }

temperatureSensorTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF TemperatureSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Sensors which read temperature with units of degrees
         Celsius."
    ::= { packetfluxSensors 3 }

temperatureSensorEntry OBJECT-TYPE
    SYNTAX        TemperatureSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A single entry of the temperatureSensor table."
    INDEX
        { temperatureSensorSlot, temperatureSensorIndex }
    ::= { temperatureSensorTable 1 }

TemperatureSensorEntry ::= SEQUENCE
{
    temperatureSensorSlot        Unsigned32,
    temperatureSensorIndex       Unsigned32,
    temperatureSensorDescription DisplayString,
    temperatureSensorValue       Fixed2DecimalDigits,
    temperatureSensorFunction    DisplayString
}


temperatureSensorSlot OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The slot which contains the sensor."
    ::= { temperatureSensorEntry 1 }

temperatureSensorIndex OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The number of the sensor within the slot. This field
         distinguishes between multiple sensors of the same type in the
         same slot, and is used as an index for this table."
    ::= { temperatureSensorEntry 2 }

temperatureSensorDescription OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Contains a brief description for this sensor. This may be able
         to be set by the user."
    ::= { temperatureSensorEntry 3 }

temperatureSensorValue OBJECT-TYPE
    SYNTAX        Fixed2DecimalDigits
    UNITS         "C"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of the sensor in degrees Celsius. Note that this is
         reported from the controller with 2 decimal digits. Some SNMP
         tools will automatically put the decimal in the right spot. If
         not, you will need to divide this value by 100 to get the value
         in Degrees.   If you're needing Fahrenheit, multiply this value
         by 1.8 then add 32 - or alternatively multiply by 9, divide by
         5, then add 32 to the result."
    ::= { temperatureSensorEntry 4 }

temperatureSensorFunction OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A human readable description of the function of this sensor."
    ::= { temperatureSensorEntry 5 }

resistanceSensorTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF ResistanceSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Sensors which read resistance with units of ohms"
    ::= { packetfluxSensors 4 }

resistanceSensorEntry OBJECT-TYPE
    SYNTAX        ResistanceSensorEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A single entry of the resistanceSensor table."
    INDEX
        { resistanceSensorSlot, resistanceSensorIndex }
    ::= { resistanceSensorTable 1 }

ResistanceSensorEntry ::= SEQUENCE
{
    resistanceSensorSlot        Unsigned32,
    resistanceSensorIndex       Unsigned32,
    resistanceSensorDescription DisplayString,
    resistanceSensorValue       Fixed2DecimalDigits,
    resistanceSensorFunction    DisplayString
}


resistanceSensorSlot OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The slot which contains the sensor."
    ::= { resistanceSensorEntry 1 }

resistanceSensorIndex OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The number of the sensor within the slot. This field
         distinguishes between multiple sensors of the same type in the
         same slot, and is used as an index for this table."
    ::= { resistanceSensorEntry 2 }

resistanceSensorDescription OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Contains a brief description for this sensor. This may be able
         to be set by the user."
    ::= { resistanceSensorEntry 3 }

resistanceSensorValue OBJECT-TYPE
    SYNTAX        Fixed2DecimalDigits
    UNITS         "C"
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of the sensor in ohms. Note that this is reported
         from the controller with 2 decimal digits. Some SNMP tools will
         automatically put the decimal in the right spot. If not, you
         will need to divide this value by 100 to get the correct
         value."
    ::= { resistanceSensorEntry 4 }

resistanceSensorFunction OBJECT-TYPE
    SYNTAX        DisplayString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "A human readable description of the function of this sensor."
    ::= { resistanceSensorEntry 5 }

packetfluxSensorsConformance OBJECT IDENTIFIER ::= { packetfluxSensors 128 }

packetfluxSensorsGroups OBJECT IDENTIFIER ::= { packetfluxSensorsConformance 1 }

packetfluxSensorsMibAllObjects OBJECT-GROUP
    OBJECTS
        { currentSensorDescription, currentSensorFunction,
        currentSensorValue, temperatureSensorDescription,
        temperatureSensorFunction, temperatureSensorValue,
        resistanceSensorDescription, resistanceSensorFunction,
        resistanceSensorValue, voltageSensorDescription,
        voltageSensorFunction, voltageSensorValue }
    STATUS        current
    DESCRIPTION
        "This automatically created object group contains all those
         objects that do not belong to any other OBJECT-GROUP"
    ::= { packetfluxSensorsGroups 1 }

END