(kicad_pcb (version 20171130) (host pcbnew 5.1.2)

  (general
    (thickness 1.6)
    (drawings 14)
    (tracks 0)
    (zones 0)
    (modules 8)
    (nets 32)
  )

  (page A4)
  (layers
    (0 F.Cu signal)
    (31 B.Cu signal)
    (32 B.Adhes user)
    (33 F.Adhes user)
    (34 B.Paste user)
    (35 F.Paste user)
    (36 B.SilkS user)
    (37 F.SilkS user)
    (38 B.Mask user)
    (39 F.Mask user)
    (40 Dwgs.User user)
    (41 Cmts.User user hide)
    (42 Eco1.User user)
    (43 Eco2.User user)
    (44 Edge.Cuts user)
    (45 Margin user)
    (46 B.CrtYd user)
    (47 F.CrtYd user)
    (48 B.Fab user)
    (49 F.Fab user)
  )

  (setup
    (last_trace_width 0.25)
    (trace_clearance 0.2)
    (zone_clearance 0.508)
    (zone_45_only no)
    (trace_min 0.2)
    (via_size 0.8)
    (via_drill 0.4)
    (via_min_size 0.4)
    (via_min_drill 0.3)
    (uvia_size 0.3)
    (uvia_drill 0.1)
    (uvias_allowed no)
    (uvia_min_size 0.2)
    (uvia_min_drill 0.1)
    (edge_width 0.05)
    (segment_width 0.2)
    (pcb_text_width 0.3)
    (pcb_text_size 1.5 1.5)
    (mod_edge_width 0.12)
    (mod_text_size 1 1)
    (mod_text_width 0.15)
    (pad_size 3.2 3.2)
    (pad_drill 2.5)
    (pad_to_mask_clearance 0.051)
    (solder_mask_min_width 0.25)
    (aux_axis_origin 0 0)
    (visible_elements FFFFF77F)
    (pcbplotparams
      (layerselection 0x010fc_ffffffff)
      (usegerberextensions false)
      (usegerberattributes false)
      (usegerberadvancedattributes false)
      (creategerberjobfile false)
      (excludeedgelayer true)
      (linewidth 0.100000)
      (plotframeref false)
      (viasonmask false)
      (mode 1)
      (useauxorigin false)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.000000)
      (psnegative false)
      (psa4output false)
      (plotreference true)
      (plotvalue true)
      (plotinvisibletext false)
      (padsonsilk false)
      (subtractmaskfromsilk false)
      (outputformat 1)
      (mirror false)
      (drillshape 1)
      (scaleselection 1)
      (outputdirectory ""))
  )

  (net 0 "")
  (net 1 "Net-(J2-Pad3)")
  (net 2 "Net-(J2-Pad4)")
  (net 3 "Net-(J2-Pad2)")
  (net 4 +BATT)
  (net 5 GND)
  (net 6 VBUS)
  (net 7 /MISC)
  (net 8 /TX)
  (net 9 /RX)
  (net 10 /MISO)
  (net 11 /MOSI)
  (net 12 /SCK)
  (net 13 /A5)
  (net 14 /A4)
  (net 15 /A3)
  (net 16 /A2)
  (net 17 /A1)
  (net 18 /A0)
  (net 19 /Aref)
  (net 20 +3V3)
  (net 21 /~RST~)
  (net 22 /SDA)
  (net 23 /SCL)
  (net 24 /GPIO05)
  (net 25 /GPIO06)
  (net 26 /GPIO09)
  (net 27 /GPIO10)
  (net 28 /GPIO11)
  (net 29 /GPIO12)
  (net 30 /GPIO13)
  (net 31 /EN)

  (net_class Default "This is the default net class."
    (clearance 0.2)
    (trace_width 0.25)
    (via_dia 0.8)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
    (add_net +3V3)
    (add_net +BATT)
    (add_net /A0)
    (add_net /A1)
    (add_net /A2)
    (add_net /A3)
    (add_net /A4)
    (add_net /A5)
    (add_net /Aref)
    (add_net /EN)
    (add_net /GPIO05)
    (add_net /GPIO06)
    (add_net /GPIO09)
    (add_net /GPIO10)
    (add_net /GPIO11)
    (add_net /GPIO12)
    (add_net /GPIO13)
    (add_net /MISC)
    (add_net /MISO)
    (add_net /MOSI)
    (add_net /RX)
    (add_net /SCK)
    (add_net /SCL)
    (add_net /SDA)
    (add_net /TX)
    (add_net /~RST~)
    (add_net GND)
    (add_net "Net-(J2-Pad2)")
    (add_net "Net-(J2-Pad3)")
    (add_net "Net-(J2-Pad4)")
    (add_net VBUS)
  )

  (module Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical (layer F.Cu) (tedit 5B78AD87) (tstamp 5D53D682)
    (at 137.795 86.106)
    (descr "JST PH series connector, B2B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator")
    (tags "connector JST PH side entry")
    (path /5D4DC9A5)
    (attr smd)
    (fp_text reference J1 (at 0 -5.45) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_Battery (at 0 4.45) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 -1) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -1 0.042893) (end -0.5 0.75) (layer F.Fab) (width 0.1))
    (fp_line (start -1.5 0.75) (end -1 0.042893) (layer F.Fab) (width 0.1))
    (fp_line (start 4.7 -4.75) (end -4.7 -4.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.7 3.75) (end 4.7 -4.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.7 3.75) (end 4.7 3.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.7 -4.75) (end -4.7 3.75) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.25 -2.75) (end 0.75 -2.75) (layer F.Fab) (width 0.1))
    (fp_line (start 1.25 -2.25) (end 1.25 -2.75) (layer F.Fab) (width 0.1))
    (fp_line (start 0.75 -2.25) (end 1.25 -2.25) (layer F.Fab) (width 0.1))
    (fp_line (start 0.75 -2.75) (end 0.75 -2.25) (layer F.Fab) (width 0.1))
    (fp_line (start -0.75 -2.75) (end -1.25 -2.75) (layer F.Fab) (width 0.1))
    (fp_line (start -0.75 -2.25) (end -0.75 -2.75) (layer F.Fab) (width 0.1))
    (fp_line (start -1.25 -2.25) (end -0.75 -2.25) (layer F.Fab) (width 0.1))
    (fp_line (start -1.25 -2.75) (end -1.25 -2.25) (layer F.Fab) (width 0.1))
    (fp_line (start 3.975 0.75) (end 3.975 -4.25) (layer F.Fab) (width 0.1))
    (fp_line (start -3.975 0.75) (end -3.975 -4.25) (layer F.Fab) (width 0.1))
    (fp_line (start -3.975 -4.25) (end 3.975 -4.25) (layer F.Fab) (width 0.1))
    (fp_line (start 4.085 -4.36) (end 4.085 -3.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.085 -4.36) (end 4.085 -4.36) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.085 -3.51) (end -4.085 -4.36) (layer F.SilkS) (width 0.12))
    (fp_line (start 4.085 0.86) (end 1.76 0.86) (layer F.SilkS) (width 0.12))
    (fp_line (start 4.085 0.01) (end 4.085 0.86) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.76 0.86) (end -1.76 3.25) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.085 0.86) (end -1.76 0.86) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.085 0.01) (end -4.085 0.86) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.975 0.75) (end 3.975 0.75) (layer F.Fab) (width 0.1))
    (pad MP smd roundrect (at 3.4 -1.75) (size 1.6 3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625))
    (pad MP smd roundrect (at -3.4 -1.75) (size 1.6 3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625))
    (pad 2 smd roundrect (at 1 0.5) (size 1 5.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 4 +BATT))
    (pad 1 smd roundrect (at -1 0.5) (size 1 5.5) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 5 GND))
    (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_USB:USB_Micro-B_Molex-105017-0001 locked (layer F.Cu) (tedit 5A1DC0BE) (tstamp 5D4E12BF)
    (at 129.794 92.71 270)
    (descr http://www.molex.com/pdm_docs/sd/1050170001_sd.pdf)
    (tags "Micro-USB SMD Typ-B")
    (path /5D4D715B)
    (attr smd)
    (fp_text reference J2 (at 0 -3.1125 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value USB_B_Micro (at 0.3 4.3375 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -1.1 -2.1225) (end -1.1 -1.9125) (layer F.Fab) (width 0.1))
    (fp_line (start -1.5 -2.1225) (end -1.5 -1.9125) (layer F.Fab) (width 0.1))
    (fp_line (start -1.5 -2.1225) (end -1.1 -2.1225) (layer F.Fab) (width 0.1))
    (fp_line (start -1.1 -1.9125) (end -1.3 -1.7125) (layer F.Fab) (width 0.1))
    (fp_line (start -1.3 -1.7125) (end -1.5 -1.9125) (layer F.Fab) (width 0.1))
    (fp_line (start -1.7 -2.3125) (end -1.7 -1.8625) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.7 -2.3125) (end -1.25 -2.3125) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.9 -1.7625) (end 3.45 -1.7625) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.9 0.0875) (end 3.9 -1.7625) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.9 2.6375) (end -3.9 2.3875) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.75 3.3875) (end -3.75 -1.6125) (layer F.Fab) (width 0.1))
    (fp_line (start -3.75 -1.6125) (end 3.75 -1.6125) (layer F.Fab) (width 0.1))
    (fp_line (start -3.75 3.389204) (end 3.75 3.389204) (layer F.Fab) (width 0.1))
    (fp_line (start -3 2.689204) (end 3 2.689204) (layer F.Fab) (width 0.1))
    (fp_line (start 3.75 3.3875) (end 3.75 -1.6125) (layer F.Fab) (width 0.1))
    (fp_line (start 3.9 2.6375) (end 3.9 2.3875) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.9 0.0875) (end -3.9 -1.7625) (layer F.SilkS) (width 0.12))
    (fp_line (start -3.9 -1.7625) (end -3.45 -1.7625) (layer F.SilkS) (width 0.12))
    (fp_line (start -4.4 3.64) (end -4.4 -2.46) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.4 -2.46) (end 4.4 -2.46) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.4 -2.46) (end 4.4 3.64) (layer F.CrtYd) (width 0.05))
    (fp_line (start -4.4 3.64) (end 4.4 3.64) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0.8875 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user "PCB Edge" (at 0 2.6875 90) (layer Dwgs.User)
      (effects (font (size 0.5 0.5) (thickness 0.08)))
    )
    (pad 6 smd rect (at -2.9 1.2375 270) (size 1.2 1.9) (layers F.Cu F.Mask)
      (net 5 GND))
    (pad 6 smd rect (at 2.9 1.2375 270) (size 1.2 1.9) (layers F.Cu F.Mask)
      (net 5 GND))
    (pad 6 thru_hole oval (at 3.5 1.2375 270) (size 1.2 1.9) (drill oval 0.6 1.3) (layers *.Cu *.Mask)
      (net 5 GND))
    (pad 6 thru_hole oval (at -3.5 1.2375 90) (size 1.2 1.9) (drill oval 0.6 1.3) (layers *.Cu *.Mask)
      (net 5 GND))
    (pad 6 smd rect (at -1 1.2375 270) (size 1.5 1.9) (layers F.Cu F.Paste F.Mask)
      (net 5 GND))
    (pad 6 thru_hole circle (at 2.5 -1.4625 270) (size 1.45 1.45) (drill 0.85) (layers *.Cu *.Mask)
      (net 5 GND))
    (pad 3 smd rect (at 0 -1.4625 270) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
      (net 1 "Net-(J2-Pad3)"))
    (pad 4 smd rect (at 0.65 -1.4625 270) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
      (net 2 "Net-(J2-Pad4)"))
    (pad 5 smd rect (at 1.3 -1.4625 270) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
      (net 5 GND))
    (pad 1 smd rect (at -1.3 -1.4625 270) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
      (net 6 VBUS))
    (pad 2 smd rect (at -0.65 -1.4625 270) (size 0.4 1.35) (layers F.Cu F.Paste F.Mask)
      (net 3 "Net-(J2-Pad2)"))
    (pad 6 thru_hole circle (at -2.5 -1.4625 270) (size 1.45 1.45) (drill 0.85) (layers *.Cu *.Mask)
      (net 5 GND))
    (pad 6 smd rect (at 1 1.2375 270) (size 1.5 1.9) (layers F.Cu F.Paste F.Mask)
      (net 5 GND))
    (model ${KISYS3DMOD}/Connector_USB.3dshapes/USB_Micro-B_Molex-105017-0001.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module MountingHole:MountingHole_2.5mm_Pad locked (layer F.Cu) (tedit 5D4D8656) (tstamp 5D4E0263)
    (at 129.54 83.82)
    (descr "Mounting Hole 2.5mm")
    (tags "mounting hole 2.5mm")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.5) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.5mm_Pad (at 0 3.5) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "" thru_hole circle (at 0 0) (size 3.2 3.2) (drill 2.5) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.5mm_Pad locked (layer F.Cu) (tedit 5D4D8651) (tstamp 5D4E00FA)
    (at 129.54 101.6)
    (descr "Mounting Hole 2.5mm")
    (tags "mounting hole 2.5mm")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.5) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.5mm_Pad (at 0 3.5) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad "" thru_hole circle (at 0 0) (size 3.2 3.2) (drill 2.5) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.2mm_M2 locked (layer F.Cu) (tedit 5D4D864B) (tstamp 5D4E0624)
    (at 175.26 102.235)
    (descr "Mounting Hole 2.2mm, no annular, M2")
    (tags "mounting hole 2.2mm no annular m2")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.2mm_M2 (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 2.2 2.2) (drill 2.2) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.2mm_M2 locked (layer F.Cu) (tedit 5D4D8641) (tstamp 5D4E05EF)
    (at 175.26 83.185)
    (descr "Mounting Hole 2.2mm, no annular, M2")
    (tags "mounting hole 2.2mm no annular m2")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.2mm_M2 (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 2.2 2.2) (drill 2.2) (layers *.Cu *.Mask))
  )

  (module Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical (layer F.Cu) (tedit 5D4D8634) (tstamp 5D4E07D8)
    (at 143.51 82.55 90)
    (descr "Through hole straight socket strip, 1x12, 2.54mm pitch, single row (from Kicad 4.0.7), script generated")
    (tags "Through hole socket strip THT 1x12 2.54mm single row")
    (path /5D4E69E8)
    (fp_text reference J4 (at 0 -2.77 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_Right (at 0 30.71 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 13.97 180) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -1.27 29.21) (end -1.27 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 29.21) (end -1.27 29.21) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 -0.635) (end 1.27 29.21) (layer F.Fab) (width 0.1))
    (fp_line (start 0.635 -1.27) (end 1.27 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end 0.635 -1.27) (layer F.Fab) (width 0.1))
    (pad 12 thru_hole oval (at 0 27.94 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 22 /SDA))
    (pad 11 thru_hole oval (at 0 25.4 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 23 /SCL))
    (pad 10 thru_hole oval (at 0 22.86 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 24 /GPIO05))
    (pad 9 thru_hole oval (at 0 20.32 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 25 /GPIO06))
    (pad 8 thru_hole oval (at 0 17.78 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 26 /GPIO09))
    (pad 7 thru_hole oval (at 0 15.24 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 27 /GPIO10))
    (pad 6 thru_hole oval (at 0 12.7 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 28 /GPIO11))
    (pad 5 thru_hole oval (at 0 10.16 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 29 /GPIO12))
    (pad 4 thru_hole oval (at 0 7.62 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 30 /GPIO13))
    (pad 3 thru_hole oval (at 0 5.08 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 6 VBUS))
    (pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 31 /EN))
    (pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 4 +BATT))
    (model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x12_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical (layer F.Cu) (tedit 5D4D85F8) (tstamp 5D4E07B8)
    (at 133.35 102.87 90)
    (descr "Through hole straight socket strip, 1x16, 2.54mm pitch, single row (from Kicad 4.0.7), script generated")
    (tags "Through hole socket strip THT 1x16 2.54mm single row")
    (path /5D4E7BAF)
    (fp_text reference J3 (at 0 -2.77 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_Left (at 0 40.87 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 19.05 180) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start -1.27 39.37) (end -1.27 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 39.37) (end -1.27 39.37) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 -0.635) (end 1.27 39.37) (layer F.Fab) (width 0.1))
    (fp_line (start 0.635 -1.27) (end 1.27 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end 0.635 -1.27) (layer F.Fab) (width 0.1))
    (pad 16 thru_hole oval (at 0 38.1 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 7 /MISC))
    (pad 15 thru_hole oval (at 0 35.56 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 8 /TX))
    (pad 14 thru_hole oval (at 0 33.02 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 9 /RX))
    (pad 13 thru_hole oval (at 0 30.48 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 10 /MISO))
    (pad 12 thru_hole oval (at 0 27.94 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 11 /MOSI))
    (pad 11 thru_hole oval (at 0 25.4 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 12 /SCK))
    (pad 10 thru_hole oval (at 0 22.86 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 13 /A5))
    (pad 9 thru_hole oval (at 0 20.32 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 14 /A4))
    (pad 8 thru_hole oval (at 0 17.78 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 15 /A3))
    (pad 7 thru_hole oval (at 0 15.24 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 16 /A2))
    (pad 6 thru_hole oval (at 0 12.7 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 17 /A1))
    (pad 5 thru_hole oval (at 0 10.16 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 18 /A0))
    (pad 4 thru_hole oval (at 0 7.62 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 5 GND))
    (pad 3 thru_hole oval (at 0 5.08 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 19 /Aref))
    (pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 20 +3V3))
    (pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 21 /~RST~))
    (model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x16_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (dimension 50.8 (width 0.15) (layer Dwgs.User)
    (gr_text "2.0000 in" (at 152.4 73.757) (layer Dwgs.User)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 177.8 78.74) (xy 177.8 74.470579)))
    (feature2 (pts (xy 127 78.74) (xy 127 74.470579)))
    (crossbar (pts (xy 127 75.057) (xy 177.8 75.057)))
    (arrow1a (pts (xy 177.8 75.057) (xy 176.673496 75.643421)))
    (arrow1b (pts (xy 177.8 75.057) (xy 176.673496 74.470579)))
    (arrow2a (pts (xy 127 75.057) (xy 128.126504 75.643421)))
    (arrow2b (pts (xy 127 75.057) (xy 128.126504 74.470579)))
  )
  (dimension 22.86 (width 0.15) (layer Dwgs.User)
    (gr_text "0.9000 in" (at 118.08 92.71 270) (layer Dwgs.User)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 124.46 104.14) (xy 118.793579 104.14)))
    (feature2 (pts (xy 124.46 81.28) (xy 118.793579 81.28)))
    (crossbar (pts (xy 119.38 81.28) (xy 119.38 104.14)))
    (arrow1a (pts (xy 119.38 104.14) (xy 118.793579 103.013496)))
    (arrow1b (pts (xy 119.38 104.14) (xy 119.966421 103.013496)))
    (arrow2a (pts (xy 119.38 81.28) (xy 118.793579 82.406504)))
    (arrow2b (pts (xy 119.38 81.28) (xy 119.966421 82.406504)))
  )
  (gr_arc (start 129.54 101.6) (end 127 101.6) (angle -90) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C62))
  (gr_line (start 127 95.25) (end 127 101.6) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C61))
  (gr_line (start 127.508 94.742) (end 127 95.25) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C60))
  (gr_line (start 127.508 90.678) (end 127.508 94.742) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C5F))
  (gr_line (start 127 90.17) (end 127.508 90.678) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C5E))
  (gr_line (start 127 83.82) (end 127 90.17) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C5D))
  (gr_arc (start 129.54 83.82) (end 129.54 81.28) (angle -90) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C58))
  (gr_arc (start 175.26 101.6) (end 175.26 104.14) (angle -90) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C57))
  (gr_line (start 175.26 81.28) (end 129.54 81.28) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C56))
  (gr_arc (start 175.26 83.82) (end 177.8 83.82) (angle -90) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C55))
  (gr_line (start 129.54 104.14) (end 175.26 104.14) (layer Edge.Cuts) (width 0.15) (tstamp 5D4D9C54))
  (gr_line (start 177.8 101.6) (end 177.8 83.82) (layer Edge.Cuts) (width 0.15) (tstamp 5D4DBB23))

)