message(STATUS "CMake version: ${CMAKE_VERSION}")
cmake_minimum_required(VERSION 3.16)

if (CMAKE_VERSION VERSION_GREATER_EQUAL 3.24.0)
  # We need the timestamps in the files to be the same as they are in the archive, otherwise the build starts
  # failing as automake thinks the files are out-of-date and need to be reconfigured.
  # https://cmake.org/cmake/help/latest/policy/CMP0135.html
  cmake_policy(SET CMP0135 OLD)
endif()

include(${CMAKE_SOURCE_DIR}/cmake/macros.cmake)
enable_testing()

# Packaging builds install to /usr and other builds to /usr/local
if(PACKAGE)
  set(CMAKE_INSTALL_PREFIX "/usr" CACHE PATH "Prefix prepended to install directories.")
endif()

# Set default values for cache entries and set the MaxScale version
include(cmake/defaults.cmake)

include(VERSION.cmake)
if (MAXSCALE_MATURITY EQUAL "Develop")
  add_definitions(-DMAXSCALE_DEVELOP=1)
endif()

include(ExternalProject)
include(FetchContent)

set(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING "Choose the type of build, options are: None(CMAKE_CXX_FLAGS or CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel.")
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake")

project(MaxScale)

# Set the installation layout
include(${CMAKE_SOURCE_DIR}/cmake/install_layout.cmake)

# Configure RPATH
# (it has to be before any executable generation)
include(cmake/rpath.cmake)

# Do the platform check
include(cmake/CheckPlatform.cmake)

check_dirs()
find_package(GSSAPI)
find_package(ZSTD REQUIRED)
find_package(OpenSSL REQUIRED)
find_package(Git REQUIRED)
find_package(LibUUID REQUIRED)
find_package(CURL REQUIRED)
find_package(PAM REQUIRED)
find_package(GnuTLS REQUIRED)
find_package(Libatomic REQUIRED)
find_package(Tclsh REQUIRED)
find_package(ODBC REQUIRED)

if (FORCE_BUNDLE)
  include(cmake/BuildMicroHttpd.cmake)
  include(cmake/BuildJansson.cmake)
  include(cmake/BuildPCRE2.cmake)
  include(cmake/BuildLibSSH.cmake)

  # Both of these modules require librdkafka
  if (BUILD_KAFKACDC OR BUILD_KAFKAIMPORTER OR BUILD_MIRROR OR BUILD_SYSTEM_TESTS)
    include(cmake/BuildRdkafka.cmake)
    include_directories(${RDKAFKA_INCLUDE_DIR})
  endif()

else()
  find_package(MicroHttpd REQUIRED)
  find_package(Jansson REQUIRED)
  find_package(PCRE2 REQUIRED)
  find_package(LibSSH REQUIRED)
  find_package(Rdkafka)
endif()

if (PCRE2_VERSION VERSION_LESS_EQUAL "10.32")
  message(STATUS "PCRE2 ${PCRE2_VERSION} is too old, disabling JIT compilation.")
  add_definitions(-DMXS_PCRE2_NO_JIT=1)
endif()

if (WITH_LTO)
  include(CheckIPOSupported)
  check_ipo_supported(RESULT ipo_res OUTPUT ipo_out)
  if(ipo_res)
    # IPO supported, enable it on all targets.
    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION_RELWITHDEBINFO TRUE)
    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION_RELEASE TRUE)
    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION_MINSIZEREL TRUE)
    message(STATUS "Using link-time optimization for release mode builds")
  else()
    message(FATAL_ERROR "Link-time optimization is not supported: ${ipo_out}")
  endif()
endif()

# Always build Connector-C from a known good commit
include(cmake/BuildMariaDBConnector.cmake)
include_directories(BEFORE ${MARIADB_CONNECTOR_INCLUDE_DIR})

# Include the directorories of the libraries. As these might be custom versions,
# we always include them before all other directories.
include_directories(BEFORE ${MICROHTTPD_INCLUDE_DIR})
include_directories(BEFORE ${JANSSON_INCLUDE_DIR})
include_directories(BEFORE ${PCRE2_INCLUDE_DIRS})

# Include jwt-cpp headers
include_directories(jwt-cpp/include)

if(NOT OPENSSL_FOUND AND NOT BUILD_SYSTEM_TESTS)
  message(FATAL_ERROR "Failed to locate dependency: OpenSSL")
else()
  if(OPENSSL_VERSION VERSION_LESS 1 AND NOT FORCE_OPENSSL100)
    add_definitions("-DOPENSSL_0_9")
  elseif(OPENSSL_VERSION VERSION_LESS 1.1)
    add_definitions("-DOPENSSL_1_0")
  else()
    add_definitions("-DOPENSSL_1_1")
  endif()
endif()

if(GIT_FOUND)
  message(STATUS "Found git ${GIT_VERSION_STRING}")
  execute_process(COMMAND ${GIT_EXECUTABLE} rev-list --max-count=1 HEAD
    WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
    OUTPUT_VARIABLE GIT_COMMIT
    ERROR_VARIABLE GIT_ERROR
    RESULT_VARIABLE GIT_RVAL)
  if(${GIT_RVAL} EQUAL 0)
    string(REPLACE "\n" "" MAXSCALE_COMMIT ${GIT_COMMIT})
    message(STATUS "Commit ID: ${MAXSCALE_COMMIT}")
  else()
    message(STATUS "Git exited with non-zero value: ${GIT_ERROR}")
    message(STATUS "Could not find repository in source folder, MaxScale commit ID will not be resolved. Will use 'source-build' for commit ID.")
    set(MAXSCALE_COMMIT "source-build")
  endif()
else()
  message(WARNING "Could not find git, MaxScale commit ID will not be resolved. Will use 'source-build' for commit ID.")
  set(MAXSCALE_COMMIT "source-build")
endif()

# Copy cmake_flags, JENKINS_BUILD_TAG, source and value evironmental variables
# into cmake variables. These are used by the build system to store information
# about the packages being built.
set(MAXSCALE_SOURCE "$ENV{source} $ENV{value}")
set(MAXSCALE_CMAKE_FLAGS "$ENV{cmake_flags}")
set(MAXSCALE_JENKINS_BUILD_TAG "$ENV{BUILD_TAG}")

# Options enabled only in debug builds (a literal multi-line string)
if (CMAKE_BUILD_TYPE STREQUAL "Debug")
  set(SERVICE_FILE_DEBUG_OPTIONS "LimitCORE=infinity")
endif()

file(MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/server/include)

add_compile_options(-fno-omit-frame-pointer -Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-variable -Wno-unused-function -Wno-unused-but-set-variable -Werror=format-security -Werror -fPIC)

# clang complains if a compile flag is not used
add_link_options(-rdynamic)

if(GCOV)
  add_compile_options(--coverage -O0 -g -fprofile-arcs -fprofile-abs-path -ftest-coverage)
  add_link_options(-lgcov -fprofile-arcs -fprofile-abs-path -ftest-coverage)
endif()

if(PROFILE)
  message(STATUS "Profiling executables")
  add_compile_options(-pg)
endif()

# The ASAN, TSAN and UBSAN flags are passed with both add_compile_options and
# add_link options so that they're visible to both the compiler and the
# linker. The old CMAKE_C_FLAGS approach automatically passed them to both but
# this is a bit more clear in that it's both a linker and a compiler flag and
# that it affects both C and C++.
if (WITH_ASAN)
  add_compile_options(-fsanitize=address)
  add_link_options(-fsanitize=address)
  # Only relevant when MaxScale is linked with -fsanitize=address
  set(SERVICE_FILE_ASAN_OPTIONS "Environment=ASAN_OPTIONS=disable_coredump=0:abort_on_error=1:unmap_shadow_on_exit=1")
  add_definitions(-DMXS_WITH_ASAN=1)
endif()
if (WITH_TSAN)
  add_compile_options(-fsanitize=thread)
  add_link_options(-fsanitize=thread)
endif()
if (WITH_UBSAN)
  add_compile_options(-fsanitize=undefined -fno-sanitize=vptr -fno-sanitize-recover)
  add_link_options(-fsanitize=undefined -fno-sanitize=vptr -fno-sanitize-recover)
  set(SERVICE_FILE_UBSAN_OPTIONS "Environment=UBSAN_OPTIONS=abort_on_error=1:print_stacktrace=1")
endif()

# disable warnings emanating from sqlite
if (CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
  add_compile_options(-Wno-tautological-constant-out-of-range-compare -Wno-implicit-const-int-float-conversion -Wno-unqualified-std-cast-call)
else() # GCC
  if (${CMAKE_CXX_COMPILER_VERSION} VERSION_GREATER 7.1.0)
    add_compile_options(-Wshadow=local)
  endif()
endif()

set(CMAKE_C_STANDARD 99)
set(CMAKE_CXX_STANDARD 17)

# CRTP in config2.hh subclasses redefining the base class virtual to_json()
# causes a warning. Calling the virtual version with such a subclass would
# be a compilation error, so the warning is not very important.
add_compile_options($<$<COMPILE_LANGUAGE:CXX>:-Wno-overloaded-virtual>)
add_compile_options($<$<COMPILE_LANGUAGE:CXX>:-Wsuggest-override>)

add_definitions(-D_GNU_SOURCE=1)
add_compile_options($<$<CONFIG:RELWITHDEBINFO>:-ggdb>)
add_compile_options($<$<CONFIG:DEBUG>:-ggdb>)
add_compile_options($<$<CONFIG:DEBUG>:-DSS_DEBUG>)
add_compile_options($<$<CONFIG:DEBUG>:-DLOG_ASSERT>)

include_directories(include)
include_directories(server/modules/include)
include_directories(${CMAKE_BINARY_DIR}/include)
include_directories(${CURL_INCLUDE_DIRS})
include_directories(maxutils/maxbase/include)
include_directories(maxutils/maxsql/include)
include_directories(maxutils/maxsimd/include)

add_subdirectory(maxutils)
add_subdirectory(server)
add_subdirectory(include/maxscale)
add_subdirectory(maxctrl)
add_subdirectory(maxgui)

if(BUILD_TESTS)
  add_subdirectory(examples)
endif()

if(BUILD_SYSTEM_TESTS)
  add_subdirectory(system-test)
endif()

install_file(etc/maxscale.cnf.template core)
install_script(script/maxscale_generate_support_info.py core)

# Install the template into /etc
if(WITH_MAXSCALE_CNF)
  install_custom_file(etc/maxscale.cnf.template ${MAXSCALE_CONFDIR} core)
endif()

install_file(${CMAKE_SOURCE_DIR}/COPYRIGHT core)
install_file(${CMAKE_SOURCE_DIR}/README.md core)
install(FILES ${CMAKE_SOURCE_DIR}/licenses/LICENSE2402.TXT RENAME LICENSE.TXT DESTINATION ${MAXSCALE_SHAREDIR} COMPONENT core)
install_file(${CMAKE_SOURCE_DIR}/LICENSE-THIRDPARTY.TXT core)
install_file(${CMAKE_SOURCE_DIR}/Documentation/Changelog.md core)
install_manual(Documentation/maxscale.1 1 core)
install_manual(Documentation/maxctrl.1 1 core)
install_manual(Documentation/maxkeys.1 1 core)
install_manual(Documentation/maxpasswd.1 1 core)
install_file(${CMAKE_SOURCE_DIR}/etc/logrotate.d/maxscale_logrotate core)
install_file(${CMAKE_BINARY_DIR}/maxscale.conf core)
install_file(${CMAKE_BINARY_DIR}/maxscale.service core)

if(PACKAGE)
  # Configure packaging
  include(cmake/package.cmake)

  # Generates a source tarball
  add_custom_target(dist
    COMMAND ${CMAKE_CPACK_COMMAND} -G TGZ --config ${CMAKE_BINARY_DIR}/CPackSourceConfig.cmake
    COMMENT "Building source tarball" VERBATIM)

  # If we're building a source package and the GUI or MaxCtrl are being built, bundle the
  # node_modules so that they don't need to be downloaded.
  set(CPACK_SOURCE_INSTALLED_DIRECTORIES "${CMAKE_SOURCE_DIR};.")

  set(CPACK_PACKAGE_CHECKSUM "SHA256")

  if (BUILD_GUI)
    set(CPACK_SOURCE_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES};${CMAKE_BINARY_DIR}/maxgui/node_modules;./maxgui/node_modules")
    add_dependencies(dist maxgui_node_modules)
  endif()

  if (BUILD_MAXCTRL)
    set(CPACK_SOURCE_INSTALLED_DIRECTORIES "${CPACK_SOURCE_INSTALLED_DIRECTORIES};${CMAKE_BINARY_DIR}/maxctrl/node_modules;./maxctrl/node_modules")
    add_dependencies(dist maxctrl_node_modules)
  endif()

  # Install the files copied by the postinst script into the share folder
  install_file(${CMAKE_BINARY_DIR}/maxscale.conf core)
  install_program(${CMAKE_BINARY_DIR}/postinst core)
  install_program(${CMAKE_BINARY_DIR}/prerm core)

  # The inclusion of CPack needs to be the last effective packaging related command. All
  # configurations to packaging done after the call will be ignored.
  include(CPack)
endif()

# Configure files that use CMake variables. Do this as the last step so that all modifications to the variables are done.
configure_file(${CMAKE_SOURCE_DIR}/server/test/maxscale_test.h.in ${CMAKE_BINARY_DIR}/include/maxscale/maxscale_test.h @ONLY)
configure_file(${CMAKE_SOURCE_DIR}/etc/postinst.in ${CMAKE_BINARY_DIR}/postinst @ONLY)
configure_file(${CMAKE_SOURCE_DIR}/etc/prerm.in ${CMAKE_BINARY_DIR}/prerm @ONLY)
configure_file(${CMAKE_SOURCE_DIR}/test/maxscale_test.cnf ${CMAKE_BINARY_DIR}/maxscale.cnf @ONLY)
configure_file(${CMAKE_SOURCE_DIR}/etc/maxscale.conf.in ${CMAKE_BINARY_DIR}/maxscale.conf @ONLY)

if (WITH_VALGRIND)
  # For builds that invoke valgrind automatically, use the custom service file.
  configure_file(${CMAKE_SOURCE_DIR}/etc/maxscale-valgrind.service.in ${CMAKE_BINARY_DIR}/maxscale.service @ONLY)
else()
  configure_file(${CMAKE_SOURCE_DIR}/etc/maxscale.service.in ${CMAKE_BINARY_DIR}/maxscale.service @ONLY)
endif()

#
# Custom targets for MaxScale
#

# uninstall target
# see http://www.cmake.org/Wiki/CMake_FAQ#Can_I_do_.22make_uninstall.22_with_CMake.3F
configure_file(
    "${CMAKE_CURRENT_SOURCE_DIR}/cmake/cmake_uninstall.cmake.in"
    "${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake"
    IMMEDIATE @ONLY)

add_custom_target(uninstall
    COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_BINARY_DIR}/cmake_uninstall.cmake)