LEFT Mounting Holes and Pads <author>Created by librarian@cadsoft.de</author> MOUNTING PAD 3.2 mm, round 3,2 MOUNTING PAD 3.2 mm, round Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE >NAME >VALUE RESISTOR type 0204, grid 7.5 mm >NAME >VALUE Double-row, 20-pin Receptacle Header (Female) Straight, 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 8.50 mm insulator length, 25.90 X 5.08 X 8.50 mm body Double-row (2X10), 20-pin Receptacle Header (Female) Straight package with 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 0.64 mm lead width, 3.00 mm tail length and 8.50 mm insulator length with overall size 25.90 X 5.08 X 8.50 mm, pin pattern - clockwise from top left >NAME >VALUE Single In Line >NAME >VALUE 1 20-DIP, 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span, 25.91 X 6.35 X 5.08 mm body 20-pin DIP package with 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span with body size 25.91 X 6.35 X 5.08 mm >NAME >VALUE Raspberry Pi board model B+, full outline with position of big connectors & drill holes 1 >NAME >VALUE RESISTOR type 0204, grid 7.5 mm Double-row, 20-pin Receptacle Header (Female) Straight, 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 8.50 mm insulator length, 25.90 X 5.08 X 8.50 mm body Double-row (2X10), 20-pin Receptacle Header (Female) Straight package with 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 0.64 mm lead width, 3.00 mm tail length and 8.50 mm insulator length with overall size 25.90 X 5.08 X 8.50 mm, pin pattern - clockwise from top left Single In Line 20-DIP, 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span, 25.91 X 6.35 X 5.08 mm body 20-pin DIP package with 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span with body size 25.91 X 6.35 X 5.08 mm <h3>SparkFun Electronics' preferred foot prints</h3> This library contains board components that are not electrical in nature, such as stand-offs, magnets, and Actobotics. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Standoff (#4 Screw)</h3> This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. <h4>Devices Using</h4> <ul><li>STAND-OFF</li></ul> >NAME >VALUE Standoff (#4 Screw) This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. Devices Using STAND-OFF EAGLE Design Rules Die Standard-Design-Rules sind so gewählt, dass sie für die meisten Anwendungen passen. Sollte ihre Platine besondere Anforderungen haben, treffen Sie die erforderlichen Einstellungen hier und speichern die Design Rules unter einem neuen Namen ab. EAGLE Design Rules The default Design Rules have been set to cover a wide range of applications. Your particular design may have different requirements, so please make the necessary adjustments and save your customized design rules under a new name. Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports Fusion synchronisation. This feature will not be available in this version and saving the document will break the link to the Fusion PCB feature. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.