Mounting Holes and Pads <author>Created by librarian@cadsoft.de</author> MOUNTING PAD 2.8 mm, round MOUNTING PAD 3.0 mm, round 3,0 MOUNTING PAD 3.2 mm, round 3,2 MOUNTING PAD 3.3 mm, round MOUNTING PAD 3.6 mm, round MOUNTING PAD 4.1 mm, round MOUNTING PAD 4.3 mm, round MOUNTING PAD 4.5 mm, round MOUNTING PAD 5.0 mm, round MOUNTING PAD 5.5 mm, round MOUNTING PAD 2.8 mm, round MOUNTING PAD 3.0 mm, round MOUNTING PAD 3.2 mm, round MOUNTING PAD 3.3 mm, round MOUNTING PAD 3.6 mm, round MOUNTING PAD 4.1 mm, round MOUNTING PAD 4.3 mm, round MOUNTING PAD 4.5 mm, round MOUNTING PAD 5.0 mm, round MOUNTING PAD 5.5 mm, round >NAME >VALUE MOUNTING PAD, round Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL SUPPLY SYMBOL Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER PIN HEADER >NAME >VALUE PIN HEADER Frames for Sheet and Layout Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: Document Number: >DRAWING_NAME FRAME C Size , 17 x 22 INCH, Landscape >NAME >VALUE >NAME >VALUE RESISTOR type 0204, grid 7.5 mm >NAME >VALUE Double-row, 20-pin Receptacle Header (Female) Straight, 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 8.50 mm insulator length, 25.90 X 5.08 X 8.50 mm body Double-row (2X10), 20-pin Receptacle Header (Female) Straight package with 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 0.64 mm lead width, 3.00 mm tail length and 8.50 mm insulator length with overall size 25.90 X 5.08 X 8.50 mm, pin pattern - clockwise from top left >NAME >VALUE Single In Line >NAME >VALUE 1 20-DIP, 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span, 25.91 X 6.35 X 5.08 mm body 20-pin DIP package with 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span with body size 25.91 X 6.35 X 5.08 mm >NAME >VALUE Single-row, 9-pin Pin Header (Male) Straight, 2.54 mm (0.10 in) col pitch, 5.84 mm mating length, 22.61 X 2.49 X 8.38 mm body Single-row (1X9), 9-pin Pin Header (Male) Straight package with 2.54 mm (0.10 in) col pitch, 0.64 mm lead width, 3.00 mm tail length and 5.84 mm mating length with overall size 22.61 X 2.49 X 8.38 mm, pin pattern - clockwise from top left >NAME >VALUE Raspberry Pi board model B+, full outline with position of big connectors & drill holes 1 >NAME >VALUE RESISTOR type 0204, grid 7.5 mm Double-row, 20-pin Receptacle Header (Female) Straight, 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 8.50 mm insulator length, 25.90 X 5.08 X 8.50 mm body Double-row (2X10), 20-pin Receptacle Header (Female) Straight package with 2.54 mm (0.10 in) row pitch, 2.54 mm (0.10 in) col pitch, 0.64 mm lead width, 3.00 mm tail length and 8.50 mm insulator length with overall size 25.90 X 5.08 X 8.50 mm, pin pattern - clockwise from top left Single In Line 20-DIP, 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span, 25.91 X 6.35 X 5.08 mm body 20-pin DIP package with 2.54 mm (0.10 in) pitch, 7.62 mm (0.30 in) span with body size 25.91 X 6.35 X 5.08 mm Single-row, 9-pin Pin Header (Male) Straight, 2.54 mm (0.10 in) col pitch, 5.84 mm mating length, 22.61 X 2.49 X 8.38 mm body Single-row (1X9), 9-pin Pin Header (Male) Straight package with 2.54 mm (0.10 in) col pitch, 0.64 mm lead width, 3.00 mm tail length and 5.84 mm mating length with overall size 22.61 X 2.49 X 8.38 mm, pin pattern - clockwise from top left >NAME >VALUE <h3>WS28X1 RGB LED - I2C Control</h3> 4 pin RGB LED with I2C Controller built-in >NAME >VALUE RGB WS28x1 >NAME >VALUE <h3> 20 Pin Connection</h3> 10x2 pin layout >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE SJ1 Series 3.5 mm 12 V Right Angle Through Hole Isolated Stereo Audio Jack <h3>WS2812B PTH addressable RGB LED</h3> 5mm PTH LED with built-in controller IC. <li>Color: Red/Green/Blue</li> <li>mC Rating: RGB: 390, 660, 180 mcd</li> <li>Forward Voltage: RGB: 2.0, 3.0, 3.0 V</li> SparkFun Products: <ul> <li><a href = https://www.sparkfun.com/products/12986>LED - RGB Addressable, PTH, 5mm Diffused (5 Pack)</a></li> <li><a href = https://www.sparkfun.com/products/12999>LED - RGB Addressable, PTH, 5mm Clear (5 Pack)</a></li> </ul> Datasheet referenced for footprint: <a href="https://cdn.sparkfun.com/datasheets/Components/LED/COM-12877.pdf">WS2812B-PTH</a> <h3>SparkFun Electronics' preferred foot prints</h3> This library contains board components that are not electrical in nature, such as stand-offs, magnets, and Actobotics. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Standoff (#4 Screw)</h3> This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. <h4>Devices Using</h4> <ul><li>STAND-OFF</li></ul> >NAME >VALUE <h3>Standoff (#4 Screw) - Tight fit around screw body</h3> This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. <h4>Devices Using</h4> <ul><li>STAND-OFF</li></ul> >NAME >VALUE Standoff (#4 Screw) This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. Devices Using STAND-OFF Standoff (#4 Screw) - Tight fit around screw body This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. Devices Using STAND-OFF <h3>Stand-Off Drill Hole</h3> <h3>Stand Off</h3> Drill holes for mechanically mounting via screws, standoffs, etc. Note: Use the keepout ring to avoid running the screw head into surrounding components. <h4>Variant Overviews</h4> <ul> <li>STAND-OFF - Mechanical footprint for a #4 phillips button head screw.</li> <li>STAND-OFF-TIGHT - Mechanical footprint for a #4 phillips button head screw, </li> </ul> <h4>Example SparkFun Products</h4> <ul> <li><a href="https://www.sparkfun.com/products/10453">Screw - Phillips Head (1/4", 4-40, 10 pack)</a> (PRT-10453)</li> <li><a href="https://www.sparkfun.com/products/10452">Screw - Phillips Head (1/2", 4-40, 10 pack)</a> (PRT-10452)</li> <li><a href="https://www.sparkfun.com/products/10451">Screw - Phillips Head (3/4", 4-40, 10 pack)</a> (PRT-10451)</li> <li><a href="https://www.sparkfun.com/products/10450">Screw - Phillips Head (1", 4-40, 10 pack)</a> (PRT-10450)</li> https://github.com/milador/Open-GCI 1.0 Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.