// THIS FILE IS AUTOGENERATED.
// Any changes to this file will be overwritten.
// For more information about how codegen works, see font-codegen/README.md

#[allow(unused_imports)]
use crate::codegen_prelude::*;

impl<'a> MinByteRange<'a> for TupleVariationHeader<'a> {
    fn min_byte_range(&self) -> Range<usize> {
        0..self.intermediate_end_tuple_byte_range().end
    }
    fn min_table_bytes(&self) -> &'a [u8] {
        let range = self.min_byte_range();
        self.data.as_bytes().get(range).unwrap_or_default()
    }
}

impl ReadArgs for TupleVariationHeader<'_> {
    type Args = u16;
}

impl<'a> FontReadWithArgs<'a> for TupleVariationHeader<'a> {
    fn read_with_args(data: FontData<'a>, args: &u16) -> Result<Self, ReadError> {
        let axis_count = *args;

        #[allow(clippy::absurd_extreme_comparisons)]
        if data.len() < Self::MIN_SIZE {
            return Err(ReadError::OutOfBounds);
        }
        Ok(Self { data, axis_count })
    }
}

impl<'a> TupleVariationHeader<'a> {
    /// A constructor that requires additional arguments.
    ///
    /// This type requires some external state in order to be
    /// parsed.
    pub fn read(data: FontData<'a>, axis_count: u16) -> Result<Self, ReadError> {
        let args = axis_count;
        Self::read_with_args(data, &args)
    }
}

/// [TupleVariationHeader](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#tuplevariationheader)
#[derive(Clone)]
pub struct TupleVariationHeader<'a> {
    data: FontData<'a>,
    axis_count: u16,
}

#[allow(clippy::needless_lifetimes)]
impl<'a> TupleVariationHeader<'a> {
    pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + TupleIndex::RAW_BYTE_LEN);
    basic_table_impls!(impl_the_methods);

    /// The size in bytes of the serialized data for this tuple
    /// variation table.
    pub fn variation_data_size(&self) -> u16 {
        let range = self.variation_data_size_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// A packed field. The high 4 bits are flags (see below). The low
    /// 12 bits are an index into a shared tuple records array.
    pub fn tuple_index(&self) -> TupleIndex {
        let range = self.tuple_index_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    pub(crate) fn axis_count(&self) -> u16 {
        self.axis_count
    }

    pub fn variation_data_size_byte_range(&self) -> Range<usize> {
        let start = 0;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn tuple_index_byte_range(&self) -> Range<usize> {
        let start = self.variation_data_size_byte_range().end;
        let end = start + TupleIndex::RAW_BYTE_LEN;
        start..end
    }

    pub fn peak_tuple_byte_range(&self) -> Range<usize> {
        let tuple_index = self.tuple_index();
        let axis_count = self.axis_count();
        let start = self.tuple_index_byte_range().end;
        let end = start
            + (TupleIndex::tuple_len(tuple_index, axis_count, 0_usize))
                .saturating_mul(F2Dot14::RAW_BYTE_LEN);
        start..end
    }

    pub fn intermediate_start_tuple_byte_range(&self) -> Range<usize> {
        let tuple_index = self.tuple_index();
        let axis_count = self.axis_count();
        let start = self.peak_tuple_byte_range().end;
        let end = start
            + (TupleIndex::tuple_len(tuple_index, axis_count, 1_usize))
                .saturating_mul(F2Dot14::RAW_BYTE_LEN);
        start..end
    }

    pub fn intermediate_end_tuple_byte_range(&self) -> Range<usize> {
        let tuple_index = self.tuple_index();
        let axis_count = self.axis_count();
        let start = self.intermediate_start_tuple_byte_range().end;
        let end = start
            + (TupleIndex::tuple_len(tuple_index, axis_count, 1_usize))
                .saturating_mul(F2Dot14::RAW_BYTE_LEN);
        start..end
    }
}

const _: () = assert!(FontData::default_data_long_enough(
    TupleVariationHeader::MIN_SIZE
));

impl Default for TupleVariationHeader<'_> {
    fn default() -> Self {
        Self {
            data: FontData::default_table_data(),
            axis_count: Default::default(),
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for TupleVariationHeader<'a> {
    fn type_name(&self) -> &str {
        "TupleVariationHeader"
    }
    fn get_field(&self, idx: usize) -> Option<Field<'a>> {
        match idx {
            0usize => Some(Field::new(
                "variation_data_size",
                self.variation_data_size(),
            )),
            1usize => Some(Field::new("tuple_index", self.traverse_tuple_index())),
            _ => None,
        }
    }
}

#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for TupleVariationHeader<'a> {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        (self as &dyn SomeTable<'a>).fmt(f)
    }
}

/// A [Tuple Record](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#tuple-records)
///
/// The tuple variation store formats reference regions within the font’s
/// variation space using tuple records. A tuple record identifies a position
/// in terms of normalized coordinates, which use F2DOT14 values.
#[derive(Clone, Debug, PartialEq, Eq, PartialOrd, Ord, Hash)]
pub struct Tuple<'a> {
    /// Coordinate array specifying a position within the font’s variation space.
    ///
    /// The number of elements must match the axisCount specified in the
    /// 'fvar' table.
    pub values: &'a [BigEndian<F2Dot14>],
}

impl<'a> Tuple<'a> {
    /// Coordinate array specifying a position within the font’s variation space.
    ///
    /// The number of elements must match the axisCount specified in the
    /// 'fvar' table.
    pub fn values(&self) -> &'a [BigEndian<F2Dot14>] {
        self.values
    }
}

impl ReadArgs for Tuple<'_> {
    type Args = u16;
}

impl ComputeSize for Tuple<'_> {
    #[allow(clippy::needless_question_mark)]
    fn compute_size(args: &u16) -> Result<usize, ReadError> {
        let axis_count = *args;
        Ok((transforms::to_usize(axis_count)).saturating_mul(F2Dot14::RAW_BYTE_LEN))
    }
}

impl<'a> FontReadWithArgs<'a> for Tuple<'a> {
    fn read_with_args(data: FontData<'a>, args: &u16) -> Result<Self, ReadError> {
        let mut cursor = data.cursor();
        let axis_count = *args;
        Ok(Self {
            values: cursor.read_array(transforms::to_usize(axis_count))?,
        })
    }
}

#[allow(clippy::needless_lifetimes)]
impl<'a> Tuple<'a> {
    /// A constructor that requires additional arguments.
    ///
    /// This type requires some external state in order to be
    /// parsed.
    pub fn read(data: FontData<'a>, axis_count: u16) -> Result<Self, ReadError> {
        let args = axis_count;
        Self::read_with_args(data, &args)
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeRecord<'a> for Tuple<'a> {
    fn traverse(self, data: FontData<'a>) -> RecordResolver<'a> {
        RecordResolver {
            name: "Tuple",
            get_field: Box::new(move |idx, _data| match idx {
                0usize => Some(Field::new("values", self.values())),
                _ => None,
            }),
            data,
        }
    }
}

impl Format<u8> for DeltaSetIndexMapFormat0<'_> {
    const FORMAT: u8 = 0;
}

impl<'a> MinByteRange<'a> for DeltaSetIndexMapFormat0<'a> {
    fn min_byte_range(&self) -> Range<usize> {
        0..self.map_data_byte_range().end
    }
    fn min_table_bytes(&self) -> &'a [u8] {
        let range = self.min_byte_range();
        self.data.as_bytes().get(range).unwrap_or_default()
    }
}

impl<'a> FontRead<'a> for DeltaSetIndexMapFormat0<'a> {
    fn read(data: FontData<'a>) -> Result<Self, ReadError> {
        #[allow(clippy::absurd_extreme_comparisons)]
        if data.len() < Self::MIN_SIZE {
            return Err(ReadError::OutOfBounds);
        }
        Ok(Self { data })
    }
}

/// The [DeltaSetIndexMap](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#associating-target-items-to-variation-data) table format 0
#[derive(Clone)]
pub struct DeltaSetIndexMapFormat0<'a> {
    data: FontData<'a>,
}

#[allow(clippy::needless_lifetimes)]
impl<'a> DeltaSetIndexMapFormat0<'a> {
    pub const MIN_SIZE: usize = (u8::RAW_BYTE_LEN + EntryFormat::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
    basic_table_impls!(impl_the_methods);

    /// DeltaSetIndexMap format: set to 0.
    pub fn format(&self) -> u8 {
        let range = self.format_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// A packed field that describes the compressed representation of
    /// delta-set indices. See details below.
    pub fn entry_format(&self) -> EntryFormat {
        let range = self.entry_format_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// The number of mapping entries.
    pub fn map_count(&self) -> u16 {
        let range = self.map_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// The delta-set index mapping data. See details below.
    pub fn map_data(&self) -> &'a [u8] {
        let range = self.map_data_byte_range();
        self.data.read_array(range).ok().unwrap_or_default()
    }

    pub fn format_byte_range(&self) -> Range<usize> {
        let start = 0;
        let end = start + u8::RAW_BYTE_LEN;
        start..end
    }

    pub fn entry_format_byte_range(&self) -> Range<usize> {
        let start = self.format_byte_range().end;
        let end = start + EntryFormat::RAW_BYTE_LEN;
        start..end
    }

    pub fn map_count_byte_range(&self) -> Range<usize> {
        let start = self.entry_format_byte_range().end;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn map_data_byte_range(&self) -> Range<usize> {
        let entry_format = self.entry_format();
        let map_count = self.map_count();
        let start = self.map_count_byte_range().end;
        let end = start
            + (EntryFormat::map_size(entry_format, map_count)).saturating_mul(u8::RAW_BYTE_LEN);
        start..end
    }
}

const _: () = assert!(FontData::default_data_long_enough(
    DeltaSetIndexMapFormat0::MIN_SIZE
));

impl Default for DeltaSetIndexMapFormat0<'_> {
    fn default() -> Self {
        Self {
            data: FontData::default_table_data(),
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for DeltaSetIndexMapFormat0<'a> {
    fn type_name(&self) -> &str {
        "DeltaSetIndexMapFormat0"
    }
    fn get_field(&self, idx: usize) -> Option<Field<'a>> {
        match idx {
            0usize => Some(Field::new("format", self.format())),
            1usize => Some(Field::new("entry_format", self.entry_format())),
            2usize => Some(Field::new("map_count", self.map_count())),
            3usize => Some(Field::new("map_data", self.map_data())),
            _ => None,
        }
    }
}

#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for DeltaSetIndexMapFormat0<'a> {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        (self as &dyn SomeTable<'a>).fmt(f)
    }
}

impl Format<u8> for DeltaSetIndexMapFormat1<'_> {
    const FORMAT: u8 = 1;
}

impl<'a> MinByteRange<'a> for DeltaSetIndexMapFormat1<'a> {
    fn min_byte_range(&self) -> Range<usize> {
        0..self.map_data_byte_range().end
    }
    fn min_table_bytes(&self) -> &'a [u8] {
        let range = self.min_byte_range();
        self.data.as_bytes().get(range).unwrap_or_default()
    }
}

impl<'a> FontRead<'a> for DeltaSetIndexMapFormat1<'a> {
    fn read(data: FontData<'a>) -> Result<Self, ReadError> {
        #[allow(clippy::absurd_extreme_comparisons)]
        if data.len() < Self::MIN_SIZE {
            return Err(ReadError::OutOfBounds);
        }
        Ok(Self { data })
    }
}

/// The [DeltaSetIndexMap](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#associating-target-items-to-variation-data) table format 1
#[derive(Clone)]
pub struct DeltaSetIndexMapFormat1<'a> {
    data: FontData<'a>,
}

#[allow(clippy::needless_lifetimes)]
impl<'a> DeltaSetIndexMapFormat1<'a> {
    pub const MIN_SIZE: usize = (u8::RAW_BYTE_LEN + EntryFormat::RAW_BYTE_LEN + u32::RAW_BYTE_LEN);
    basic_table_impls!(impl_the_methods);

    /// DeltaSetIndexMap format: set to 1.
    pub fn format(&self) -> u8 {
        let range = self.format_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// A packed field that describes the compressed representation of
    /// delta-set indices. See details below.
    pub fn entry_format(&self) -> EntryFormat {
        let range = self.entry_format_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// The number of mapping entries.
    pub fn map_count(&self) -> u32 {
        let range = self.map_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// The delta-set index mapping data. See details below.
    pub fn map_data(&self) -> &'a [u8] {
        let range = self.map_data_byte_range();
        self.data.read_array(range).ok().unwrap_or_default()
    }

    pub fn format_byte_range(&self) -> Range<usize> {
        let start = 0;
        let end = start + u8::RAW_BYTE_LEN;
        start..end
    }

    pub fn entry_format_byte_range(&self) -> Range<usize> {
        let start = self.format_byte_range().end;
        let end = start + EntryFormat::RAW_BYTE_LEN;
        start..end
    }

    pub fn map_count_byte_range(&self) -> Range<usize> {
        let start = self.entry_format_byte_range().end;
        let end = start + u32::RAW_BYTE_LEN;
        start..end
    }

    pub fn map_data_byte_range(&self) -> Range<usize> {
        let entry_format = self.entry_format();
        let map_count = self.map_count();
        let start = self.map_count_byte_range().end;
        let end = start
            + (EntryFormat::map_size(entry_format, map_count)).saturating_mul(u8::RAW_BYTE_LEN);
        start..end
    }
}

const _: () = assert!(FontData::default_data_long_enough(
    DeltaSetIndexMapFormat1::MIN_SIZE
));

impl Default for DeltaSetIndexMapFormat1<'_> {
    fn default() -> Self {
        Self {
            data: FontData::default_format_1_u8_table_data(),
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for DeltaSetIndexMapFormat1<'a> {
    fn type_name(&self) -> &str {
        "DeltaSetIndexMapFormat1"
    }
    fn get_field(&self, idx: usize) -> Option<Field<'a>> {
        match idx {
            0usize => Some(Field::new("format", self.format())),
            1usize => Some(Field::new("entry_format", self.entry_format())),
            2usize => Some(Field::new("map_count", self.map_count())),
            3usize => Some(Field::new("map_data", self.map_data())),
            _ => None,
        }
    }
}

#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for DeltaSetIndexMapFormat1<'a> {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        (self as &dyn SomeTable<'a>).fmt(f)
    }
}

/// The [DeltaSetIndexMap](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#associating-target-items-to-variation-data) table
#[derive(Clone)]
pub enum DeltaSetIndexMap<'a> {
    Format0(DeltaSetIndexMapFormat0<'a>),
    Format1(DeltaSetIndexMapFormat1<'a>),
}

impl Default for DeltaSetIndexMap<'_> {
    fn default() -> Self {
        Self::Format0(Default::default())
    }
}

impl<'a> DeltaSetIndexMap<'a> {
    ///Return the `FontData` used to resolve offsets for this table.
    pub fn offset_data(&self) -> FontData<'a> {
        match self {
            Self::Format0(item) => item.offset_data(),
            Self::Format1(item) => item.offset_data(),
        }
    }

    /// DeltaSetIndexMap format: set to 0.
    pub fn format(&self) -> u8 {
        match self {
            Self::Format0(item) => item.format(),
            Self::Format1(item) => item.format(),
        }
    }

    /// A packed field that describes the compressed representation of
    /// delta-set indices. See details below.
    pub fn entry_format(&self) -> EntryFormat {
        match self {
            Self::Format0(item) => item.entry_format(),
            Self::Format1(item) => item.entry_format(),
        }
    }

    /// The delta-set index mapping data. See details below.
    pub fn map_data(&self) -> &'a [u8] {
        match self {
            Self::Format0(item) => item.map_data(),
            Self::Format1(item) => item.map_data(),
        }
    }
}

impl<'a> FontRead<'a> for DeltaSetIndexMap<'a> {
    fn read(data: FontData<'a>) -> Result<Self, ReadError> {
        let format: u8 = data.read_at(0usize)?;
        match format {
            DeltaSetIndexMapFormat0::FORMAT => Ok(Self::Format0(FontRead::read(data)?)),
            DeltaSetIndexMapFormat1::FORMAT => Ok(Self::Format1(FontRead::read(data)?)),
            other => Err(ReadError::InvalidFormat(other.into())),
        }
    }
}

impl<'a> MinByteRange<'a> for DeltaSetIndexMap<'a> {
    fn min_byte_range(&self) -> Range<usize> {
        match self {
            Self::Format0(item) => item.min_byte_range(),
            Self::Format1(item) => item.min_byte_range(),
        }
    }
    fn min_table_bytes(&self) -> &'a [u8] {
        match self {
            Self::Format0(item) => item.min_table_bytes(),
            Self::Format1(item) => item.min_table_bytes(),
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> DeltaSetIndexMap<'a> {
    fn dyn_inner<'b>(&'b self) -> &'b dyn SomeTable<'a> {
        match self {
            Self::Format0(table) => table,
            Self::Format1(table) => table,
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl std::fmt::Debug for DeltaSetIndexMap<'_> {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        self.dyn_inner().fmt(f)
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for DeltaSetIndexMap<'a> {
    fn type_name(&self) -> &str {
        self.dyn_inner().type_name()
    }
    fn get_field(&self, idx: usize) -> Option<Field<'a>> {
        self.dyn_inner().get_field(idx)
    }
}

/// Entry format for a [DeltaSetIndexMap].
#[derive(Clone, Copy, Default, PartialEq, Eq, PartialOrd, Ord, Hash, bytemuck :: AnyBitPattern)]
#[cfg_attr(feature = "serde", derive(serde::Serialize, serde::Deserialize))]
#[repr(transparent)]
pub struct EntryFormat {
    bits: u8,
}

impl EntryFormat {
    /// Mask for the low 4 bits, which give the count of bits minus one that are used in each entry for the inner-level index.
    pub const INNER_INDEX_BIT_COUNT_MASK: Self = Self { bits: 0x0F };

    /// Mask for bits that indicate the size in bytes minus one of each entry.
    pub const MAP_ENTRY_SIZE_MASK: Self = Self { bits: 0x30 };
}

impl EntryFormat {
    ///  Returns an empty set of flags.
    #[inline]
    pub const fn empty() -> Self {
        Self { bits: 0 }
    }

    /// Returns the set containing all flags.
    #[inline]
    pub const fn all() -> Self {
        Self {
            bits: Self::INNER_INDEX_BIT_COUNT_MASK.bits | Self::MAP_ENTRY_SIZE_MASK.bits,
        }
    }

    /// Returns the raw value of the flags currently stored.
    #[inline]
    pub const fn bits(&self) -> u8 {
        self.bits
    }

    /// Convert from underlying bit representation, unless that
    /// representation contains bits that do not correspond to a flag.
    #[inline]
    pub const fn from_bits(bits: u8) -> Option<Self> {
        if (bits & !Self::all().bits()) == 0 {
            Some(Self { bits })
        } else {
            None
        }
    }

    /// Convert from underlying bit representation, dropping any bits
    /// that do not correspond to flags.
    #[inline]
    pub const fn from_bits_truncate(bits: u8) -> Self {
        Self {
            bits: bits & Self::all().bits,
        }
    }

    /// Returns `true` if no flags are currently stored.
    #[inline]
    pub const fn is_empty(&self) -> bool {
        self.bits() == Self::empty().bits()
    }

    /// Returns `true` if there are flags common to both `self` and `other`.
    #[inline]
    pub const fn intersects(&self, other: Self) -> bool {
        !(Self {
            bits: self.bits & other.bits,
        })
        .is_empty()
    }

    /// Returns `true` if all of the flags in `other` are contained within `self`.
    #[inline]
    pub const fn contains(&self, other: Self) -> bool {
        (self.bits & other.bits) == other.bits
    }

    /// Inserts the specified flags in-place.
    #[inline]
    pub fn insert(&mut self, other: Self) {
        self.bits |= other.bits;
    }

    /// Removes the specified flags in-place.
    #[inline]
    pub fn remove(&mut self, other: Self) {
        self.bits &= !other.bits;
    }

    /// Toggles the specified flags in-place.
    #[inline]
    pub fn toggle(&mut self, other: Self) {
        self.bits ^= other.bits;
    }

    /// Returns the intersection between the flags in `self` and
    /// `other`.
    ///
    /// Specifically, the returned set contains only the flags which are
    /// present in *both* `self` *and* `other`.
    ///
    /// This is equivalent to using the `&` operator (e.g.
    /// [`ops::BitAnd`]), as in `flags & other`.
    ///
    /// [`ops::BitAnd`]: https://doc.rust-lang.org/std/ops/trait.BitAnd.html
    #[inline]
    #[must_use]
    pub const fn intersection(self, other: Self) -> Self {
        Self {
            bits: self.bits & other.bits,
        }
    }

    /// Returns the union of between the flags in `self` and `other`.
    ///
    /// Specifically, the returned set contains all flags which are
    /// present in *either* `self` *or* `other`, including any which are
    /// present in both.
    ///
    /// This is equivalent to using the `|` operator (e.g.
    /// [`ops::BitOr`]), as in `flags | other`.
    ///
    /// [`ops::BitOr`]: https://doc.rust-lang.org/std/ops/trait.BitOr.html
    #[inline]
    #[must_use]
    pub const fn union(self, other: Self) -> Self {
        Self {
            bits: self.bits | other.bits,
        }
    }

    /// Returns the difference between the flags in `self` and `other`.
    ///
    /// Specifically, the returned set contains all flags present in
    /// `self`, except for the ones present in `other`.
    ///
    /// It is also conceptually equivalent to the "bit-clear" operation:
    /// `flags & !other` (and this syntax is also supported).
    ///
    /// This is equivalent to using the `-` operator (e.g.
    /// [`ops::Sub`]), as in `flags - other`.
    ///
    /// [`ops::Sub`]: https://doc.rust-lang.org/std/ops/trait.Sub.html
    #[inline]
    #[must_use]
    pub const fn difference(self, other: Self) -> Self {
        Self {
            bits: self.bits & !other.bits,
        }
    }
}

impl std::ops::BitOr for EntryFormat {
    type Output = Self;

    /// Returns the union of the two sets of flags.
    #[inline]
    fn bitor(self, other: EntryFormat) -> Self {
        Self {
            bits: self.bits | other.bits,
        }
    }
}

impl std::ops::BitOrAssign for EntryFormat {
    /// Adds the set of flags.
    #[inline]
    fn bitor_assign(&mut self, other: Self) {
        self.bits |= other.bits;
    }
}

impl std::ops::BitXor for EntryFormat {
    type Output = Self;

    /// Returns the left flags, but with all the right flags toggled.
    #[inline]
    fn bitxor(self, other: Self) -> Self {
        Self {
            bits: self.bits ^ other.bits,
        }
    }
}

impl std::ops::BitXorAssign for EntryFormat {
    /// Toggles the set of flags.
    #[inline]
    fn bitxor_assign(&mut self, other: Self) {
        self.bits ^= other.bits;
    }
}

impl std::ops::BitAnd for EntryFormat {
    type Output = Self;

    /// Returns the intersection between the two sets of flags.
    #[inline]
    fn bitand(self, other: Self) -> Self {
        Self {
            bits: self.bits & other.bits,
        }
    }
}

impl std::ops::BitAndAssign for EntryFormat {
    /// Disables all flags disabled in the set.
    #[inline]
    fn bitand_assign(&mut self, other: Self) {
        self.bits &= other.bits;
    }
}

impl std::ops::Sub for EntryFormat {
    type Output = Self;

    /// Returns the set difference of the two sets of flags.
    #[inline]
    fn sub(self, other: Self) -> Self {
        Self {
            bits: self.bits & !other.bits,
        }
    }
}

impl std::ops::SubAssign for EntryFormat {
    /// Disables all flags enabled in the set.
    #[inline]
    fn sub_assign(&mut self, other: Self) {
        self.bits &= !other.bits;
    }
}

impl std::ops::Not for EntryFormat {
    type Output = Self;

    /// Returns the complement of this set of flags.
    #[inline]
    fn not(self) -> Self {
        Self { bits: !self.bits } & Self::all()
    }
}

impl std::fmt::Debug for EntryFormat {
    fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
        let members: &[(&str, Self)] = &[
            (
                "INNER_INDEX_BIT_COUNT_MASK",
                Self::INNER_INDEX_BIT_COUNT_MASK,
            ),
            ("MAP_ENTRY_SIZE_MASK", Self::MAP_ENTRY_SIZE_MASK),
        ];
        let mut first = true;
        for (name, value) in members {
            if self.contains(*value) {
                if !first {
                    f.write_str(" | ")?;
                }
                first = false;
                f.write_str(name)?;
            }
        }
        if first {
            f.write_str("(empty)")?;
        }
        Ok(())
    }
}

impl std::fmt::Binary for EntryFormat {
    fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
        std::fmt::Binary::fmt(&self.bits, f)
    }
}

impl std::fmt::Octal for EntryFormat {
    fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
        std::fmt::Octal::fmt(&self.bits, f)
    }
}

impl std::fmt::LowerHex for EntryFormat {
    fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
        std::fmt::LowerHex::fmt(&self.bits, f)
    }
}

impl std::fmt::UpperHex for EntryFormat {
    fn fmt(&self, f: &mut std::fmt::Formatter) -> std::fmt::Result {
        std::fmt::UpperHex::fmt(&self.bits, f)
    }
}

impl font_types::Scalar for EntryFormat {
    type Raw = <u8 as font_types::Scalar>::Raw;
    fn to_raw(self) -> Self::Raw {
        self.bits().to_raw()
    }
    fn from_raw(raw: Self::Raw) -> Self {
        let t = <u8>::from_raw(raw);
        Self::from_bits_truncate(t)
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> From<EntryFormat> for FieldType<'a> {
    fn from(src: EntryFormat) -> FieldType<'a> {
        src.bits().into()
    }
}

impl<'a> MinByteRange<'a> for VariationRegionList<'a> {
    fn min_byte_range(&self) -> Range<usize> {
        0..self.variation_regions_byte_range().end
    }
    fn min_table_bytes(&self) -> &'a [u8] {
        let range = self.min_byte_range();
        self.data.as_bytes().get(range).unwrap_or_default()
    }
}

impl<'a> FontRead<'a> for VariationRegionList<'a> {
    fn read(data: FontData<'a>) -> Result<Self, ReadError> {
        #[allow(clippy::absurd_extreme_comparisons)]
        if data.len() < Self::MIN_SIZE {
            return Err(ReadError::OutOfBounds);
        }
        Ok(Self { data })
    }
}

/// The [VariationRegionList](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#variation-regions) table
#[derive(Clone)]
pub struct VariationRegionList<'a> {
    data: FontData<'a>,
}

#[allow(clippy::needless_lifetimes)]
impl<'a> VariationRegionList<'a> {
    pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
    basic_table_impls!(impl_the_methods);

    /// The number of variation axes for this font. This must be the
    /// same number as axisCount in the 'fvar' table.
    pub fn axis_count(&self) -> u16 {
        let range = self.axis_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// The number of variation region tables in the variation region
    /// list. Must be less than 32,768.
    pub fn region_count(&self) -> u16 {
        let range = self.region_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// Array of variation regions.
    pub fn variation_regions(&self) -> ComputedArray<'a, VariationRegion<'a>> {
        let range = self.variation_regions_byte_range();
        self.data
            .read_with_args(range, &self.axis_count())
            .unwrap_or_default()
    }

    pub fn axis_count_byte_range(&self) -> Range<usize> {
        let start = 0;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn region_count_byte_range(&self) -> Range<usize> {
        let start = self.axis_count_byte_range().end;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn variation_regions_byte_range(&self) -> Range<usize> {
        let region_count = self.region_count();
        let start = self.region_count_byte_range().end;
        let end = start
            + (transforms::to_usize(region_count)).saturating_mul(
                <VariationRegion as ComputeSize>::compute_size(&self.axis_count()).unwrap_or(0),
            );
        start..end
    }
}

const _: () = assert!(FontData::default_data_long_enough(
    VariationRegionList::MIN_SIZE
));

impl Default for VariationRegionList<'_> {
    fn default() -> Self {
        Self {
            data: FontData::default_table_data(),
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for VariationRegionList<'a> {
    fn type_name(&self) -> &str {
        "VariationRegionList"
    }
    fn get_field(&self, idx: usize) -> Option<Field<'a>> {
        match idx {
            0usize => Some(Field::new("axis_count", self.axis_count())),
            1usize => Some(Field::new("region_count", self.region_count())),
            2usize => Some(Field::new(
                "variation_regions",
                traversal::FieldType::computed_array(
                    "VariationRegion",
                    self.variation_regions(),
                    self.offset_data(),
                ),
            )),
            _ => None,
        }
    }
}

#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for VariationRegionList<'a> {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        (self as &dyn SomeTable<'a>).fmt(f)
    }
}

/// The [VariationRegion](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#variation-regions) record
#[derive(Clone, Debug, PartialEq, Eq, PartialOrd, Ord, Hash)]
pub struct VariationRegion<'a> {
    /// Array of region axis coordinates records, in the order of axes
    /// given in the 'fvar' table.
    pub region_axes: &'a [RegionAxisCoordinates],
}

impl<'a> VariationRegion<'a> {
    /// Array of region axis coordinates records, in the order of axes
    /// given in the 'fvar' table.
    pub fn region_axes(&self) -> &'a [RegionAxisCoordinates] {
        self.region_axes
    }
}

impl ReadArgs for VariationRegion<'_> {
    type Args = u16;
}

impl ComputeSize for VariationRegion<'_> {
    #[allow(clippy::needless_question_mark)]
    fn compute_size(args: &u16) -> Result<usize, ReadError> {
        let axis_count = *args;
        Ok((transforms::to_usize(axis_count)).saturating_mul(RegionAxisCoordinates::RAW_BYTE_LEN))
    }
}

impl<'a> FontReadWithArgs<'a> for VariationRegion<'a> {
    fn read_with_args(data: FontData<'a>, args: &u16) -> Result<Self, ReadError> {
        let mut cursor = data.cursor();
        let axis_count = *args;
        Ok(Self {
            region_axes: cursor.read_array(transforms::to_usize(axis_count))?,
        })
    }
}

#[allow(clippy::needless_lifetimes)]
impl<'a> VariationRegion<'a> {
    /// A constructor that requires additional arguments.
    ///
    /// This type requires some external state in order to be
    /// parsed.
    pub fn read(data: FontData<'a>, axis_count: u16) -> Result<Self, ReadError> {
        let args = axis_count;
        Self::read_with_args(data, &args)
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeRecord<'a> for VariationRegion<'a> {
    fn traverse(self, data: FontData<'a>) -> RecordResolver<'a> {
        RecordResolver {
            name: "VariationRegion",
            get_field: Box::new(move |idx, _data| match idx {
                0usize => Some(Field::new(
                    "region_axes",
                    traversal::FieldType::array_of_records(
                        stringify!(RegionAxisCoordinates),
                        self.region_axes(),
                        _data,
                    ),
                )),
                _ => None,
            }),
            data,
        }
    }
}

/// The [RegionAxisCoordinates](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#variation-regions) record
#[derive(Clone, Debug, PartialEq, Eq, PartialOrd, Ord, Hash, Copy, bytemuck :: AnyBitPattern)]
#[repr(C)]
#[repr(packed)]
pub struct RegionAxisCoordinates {
    /// The region start coordinate value for the current axis.
    pub start_coord: BigEndian<F2Dot14>,
    /// The region peak coordinate value for the current axis.
    pub peak_coord: BigEndian<F2Dot14>,
    /// The region end coordinate value for the current axis.
    pub end_coord: BigEndian<F2Dot14>,
}

impl RegionAxisCoordinates {
    /// The region start coordinate value for the current axis.
    pub fn start_coord(&self) -> F2Dot14 {
        self.start_coord.get()
    }

    /// The region peak coordinate value for the current axis.
    pub fn peak_coord(&self) -> F2Dot14 {
        self.peak_coord.get()
    }

    /// The region end coordinate value for the current axis.
    pub fn end_coord(&self) -> F2Dot14 {
        self.end_coord.get()
    }
}

impl FixedSize for RegionAxisCoordinates {
    const RAW_BYTE_LEN: usize =
        F2Dot14::RAW_BYTE_LEN + F2Dot14::RAW_BYTE_LEN + F2Dot14::RAW_BYTE_LEN;
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeRecord<'a> for RegionAxisCoordinates {
    fn traverse(self, data: FontData<'a>) -> RecordResolver<'a> {
        RecordResolver {
            name: "RegionAxisCoordinates",
            get_field: Box::new(move |idx, _data| match idx {
                0usize => Some(Field::new("start_coord", self.start_coord())),
                1usize => Some(Field::new("peak_coord", self.peak_coord())),
                2usize => Some(Field::new("end_coord", self.end_coord())),
                _ => None,
            }),
            data,
        }
    }
}

impl<'a> MinByteRange<'a> for ItemVariationStore<'a> {
    fn min_byte_range(&self) -> Range<usize> {
        0..self.item_variation_data_offsets_byte_range().end
    }
    fn min_table_bytes(&self) -> &'a [u8] {
        let range = self.min_byte_range();
        self.data.as_bytes().get(range).unwrap_or_default()
    }
}

impl<'a> FontRead<'a> for ItemVariationStore<'a> {
    fn read(data: FontData<'a>) -> Result<Self, ReadError> {
        #[allow(clippy::absurd_extreme_comparisons)]
        if data.len() < Self::MIN_SIZE {
            return Err(ReadError::OutOfBounds);
        }
        Ok(Self { data })
    }
}

/// The [ItemVariationStore](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#item-variation-store-header-and-item-variation-data-subtables) table
#[derive(Clone)]
pub struct ItemVariationStore<'a> {
    data: FontData<'a>,
}

#[allow(clippy::needless_lifetimes)]
impl<'a> ItemVariationStore<'a> {
    pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + Offset32::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
    basic_table_impls!(impl_the_methods);

    /// Format— set to 1
    pub fn format(&self) -> u16 {
        let range = self.format_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// Offset in bytes from the start of the item variation store to
    /// the variation region list.
    pub fn variation_region_list_offset(&self) -> Offset32 {
        let range = self.variation_region_list_offset_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// Attempt to resolve [`variation_region_list_offset`][Self::variation_region_list_offset].
    pub fn variation_region_list(&self) -> Result<VariationRegionList<'a>, ReadError> {
        let data = self.data;
        self.variation_region_list_offset().resolve(data)
    }

    /// The number of item variation data subtables.
    pub fn item_variation_data_count(&self) -> u16 {
        let range = self.item_variation_data_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// Offsets in bytes from the start of the item variation store to
    /// each item variation data subtable.
    pub fn item_variation_data_offsets(&self) -> &'a [BigEndian<Nullable<Offset32>>] {
        let range = self.item_variation_data_offsets_byte_range();
        self.data.read_array(range).ok().unwrap_or_default()
    }

    /// A dynamically resolving wrapper for [`item_variation_data_offsets`][Self::item_variation_data_offsets].
    pub fn item_variation_data(
        &self,
    ) -> ArrayOfNullableOffsets<'a, ItemVariationData<'a>, Offset32> {
        let data = self.data;
        let offsets = self.item_variation_data_offsets();
        ArrayOfNullableOffsets::new(offsets, data, ())
    }

    pub fn format_byte_range(&self) -> Range<usize> {
        let start = 0;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn variation_region_list_offset_byte_range(&self) -> Range<usize> {
        let start = self.format_byte_range().end;
        let end = start + Offset32::RAW_BYTE_LEN;
        start..end
    }

    pub fn item_variation_data_count_byte_range(&self) -> Range<usize> {
        let start = self.variation_region_list_offset_byte_range().end;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn item_variation_data_offsets_byte_range(&self) -> Range<usize> {
        let item_variation_data_count = self.item_variation_data_count();
        let start = self.item_variation_data_count_byte_range().end;
        let end = start
            + (transforms::to_usize(item_variation_data_count))
                .saturating_mul(Offset32::RAW_BYTE_LEN);
        start..end
    }
}

const _: () = assert!(FontData::default_data_long_enough(
    ItemVariationStore::MIN_SIZE
));

impl Default for ItemVariationStore<'_> {
    fn default() -> Self {
        Self {
            data: FontData::default_table_data(),
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for ItemVariationStore<'a> {
    fn type_name(&self) -> &str {
        "ItemVariationStore"
    }
    fn get_field(&self, idx: usize) -> Option<Field<'a>> {
        match idx {
            0usize => Some(Field::new("format", self.format())),
            1usize => Some(Field::new(
                "variation_region_list_offset",
                FieldType::offset(
                    self.variation_region_list_offset(),
                    self.variation_region_list(),
                ),
            )),
            2usize => Some(Field::new(
                "item_variation_data_count",
                self.item_variation_data_count(),
            )),
            3usize => Some(Field::new(
                "item_variation_data_offsets",
                FieldType::from(self.item_variation_data()),
            )),
            _ => None,
        }
    }
}

#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for ItemVariationStore<'a> {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        (self as &dyn SomeTable<'a>).fmt(f)
    }
}

impl<'a> MinByteRange<'a> for ItemVariationData<'a> {
    fn min_byte_range(&self) -> Range<usize> {
        0..self.delta_sets_byte_range().end
    }
    fn min_table_bytes(&self) -> &'a [u8] {
        let range = self.min_byte_range();
        self.data.as_bytes().get(range).unwrap_or_default()
    }
}

impl<'a> FontRead<'a> for ItemVariationData<'a> {
    fn read(data: FontData<'a>) -> Result<Self, ReadError> {
        #[allow(clippy::absurd_extreme_comparisons)]
        if data.len() < Self::MIN_SIZE {
            return Err(ReadError::OutOfBounds);
        }
        Ok(Self { data })
    }
}

/// The [ItemVariationData](https://learn.microsoft.com/en-us/typography/opentype/spec/otvarcommonformats#item-variation-store-header-and-item-variation-data-subtables) subtable
#[derive(Clone)]
pub struct ItemVariationData<'a> {
    data: FontData<'a>,
}

#[allow(clippy::needless_lifetimes)]
impl<'a> ItemVariationData<'a> {
    pub const MIN_SIZE: usize = (u16::RAW_BYTE_LEN + u16::RAW_BYTE_LEN + u16::RAW_BYTE_LEN);
    basic_table_impls!(impl_the_methods);

    /// The number of delta sets for distinct items.
    pub fn item_count(&self) -> u16 {
        let range = self.item_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// A packed field: the high bit is a flag—see details below.
    pub fn word_delta_count(&self) -> u16 {
        let range = self.word_delta_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// The number of variation regions referenced.
    pub fn region_index_count(&self) -> u16 {
        let range = self.region_index_count_byte_range();
        self.data.read_at(range.start).ok().unwrap()
    }

    /// Array of indices into the variation region list for the regions
    /// referenced by this item variation data table.
    pub fn region_indexes(&self) -> &'a [BigEndian<u16>] {
        let range = self.region_indexes_byte_range();
        self.data.read_array(range).ok().unwrap_or_default()
    }

    /// Delta-set rows.
    pub fn delta_sets(&self) -> &'a [u8] {
        let range = self.delta_sets_byte_range();
        self.data.read_array(range).ok().unwrap_or_default()
    }

    pub fn item_count_byte_range(&self) -> Range<usize> {
        let start = 0;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn word_delta_count_byte_range(&self) -> Range<usize> {
        let start = self.item_count_byte_range().end;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn region_index_count_byte_range(&self) -> Range<usize> {
        let start = self.word_delta_count_byte_range().end;
        let end = start + u16::RAW_BYTE_LEN;
        start..end
    }

    pub fn region_indexes_byte_range(&self) -> Range<usize> {
        let region_index_count = self.region_index_count();
        let start = self.region_index_count_byte_range().end;
        let end =
            start + (transforms::to_usize(region_index_count)).saturating_mul(u16::RAW_BYTE_LEN);
        start..end
    }

    pub fn delta_sets_byte_range(&self) -> Range<usize> {
        let item_count = self.item_count();
        let word_delta_count = self.word_delta_count();
        let region_index_count = self.region_index_count();
        let start = self.region_indexes_byte_range().end;
        let end = start
            + (ItemVariationData::delta_sets_len(item_count, word_delta_count, region_index_count))
                .saturating_mul(u8::RAW_BYTE_LEN);
        start..end
    }
}

const _: () = assert!(FontData::default_data_long_enough(
    ItemVariationData::MIN_SIZE
));

impl Default for ItemVariationData<'_> {
    fn default() -> Self {
        Self {
            data: FontData::default_table_data(),
        }
    }
}

#[cfg(feature = "experimental_traverse")]
impl<'a> SomeTable<'a> for ItemVariationData<'a> {
    fn type_name(&self) -> &str {
        "ItemVariationData"
    }
    fn get_field(&self, idx: usize) -> Option<Field<'a>> {
        match idx {
            0usize => Some(Field::new("item_count", self.item_count())),
            1usize => Some(Field::new("word_delta_count", self.word_delta_count())),
            2usize => Some(Field::new("region_index_count", self.region_index_count())),
            3usize => Some(Field::new("region_indexes", self.region_indexes())),
            4usize => Some(Field::new("delta_sets", self.delta_sets())),
            _ => None,
        }
    }
}

#[cfg(feature = "experimental_traverse")]
#[allow(clippy::needless_lifetimes)]
impl<'a> std::fmt::Debug for ItemVariationData<'a> {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        (self as &dyn SomeTable<'a>).fmt(f)
    }
}