#!/usr/bin/perl
# -*- perl -*-
# vim: ft=perl

=head1 NAME

snmp__netapp_cifs -  Munin plugin to retrieve cpu information from NetApp storage appliances.

=head1 APPLICABLE SYSTEMS

cpu should be reported by any NetApp storage appliance
with SNMP agent daemon activated. See na_snmp(8) for details.

=head1 CONFIGURATION

Unfortunately, SNMPv3 is not fully supported on all NetApp equipment.
For this reason, this plugin will use SNMPv2 by default, which is
insecure because it doesn't encrypt the community string.

The following parameters will help you get this plugin working :

 [snmp_*]
 env.community MyCommunity

If your community name is 'public', you should really worry about
security and immediately reconfigure your appliance.

Please see 'perldoc Munin::Plugin::SNMP' for further configuration.

=head1 INTERPRETATION

The plugin reports various cpu busy and idle.

=head1 MIB INFORMATION

This plugin requires support for the NETWORK-APPLIANCE-MIB issued by
Network Appliance. It reports the content of the cpu OID.

=head1 MAGIC MARKERS

 #%# family=snmpauto
 #%# capabilities=snmpconf

=head1 BUGS

This plugin wasn't tested on many hardware and only on Ontap 7.3.x.

=head1 AUTHOR

2013, Claudius Herder

NetApp is a registered trademark and Network Appliance is a trademark
of Network Appliance, Inc. in the U.S. and other countries.

=head1 LICENSE

GPLv2.

=cut

use strict;
use warnings;
use Munin::Plugin::SNMP;

my %oids =
(
#   cpuUpTime                => 'CPU_UPTIME',
#   cpuBusyTime              => 'CPU_BUSYTIME',
    cpuBusyTimePerCent       => 'Busy',
#   cpuIdleTime              => 'CPU_IDLETIME',
    cpuIdleTimePerCent       => 'Idle',
#   cpuCount                 => 'CPU_COUNT',
#   cpuSwitchInvocations     => 'CPU_SWTICHINVOCATIONS',
#   cpuContextSwitches       => 'CPU_CONTEXTSWITCHES',
#   cpuInterrupts            => 'CPU_INTERRUPTS',
#   cpuNonCPInterrupts       => 'CPU_NONCPINTERRUPTS',
#   cpuCPInterruptPercent    => 'CPU_CPINTERRUPTPERCENT',
#   cpuNonCPInterruptPercent => 'CPU_NONCPINTERRUPTPERCENT',
#   cpuTotalDomainSwitches   => 'CPU_TOTALDOMAINSWITCHES',
);

if (defined $ARGV[0] and $ARGV[0] eq 'snmpconf')
{
    print "require 1.3.6.1.4.1.789.1.2.1. [0-9]\n";
    exit 0;
}

my $session = Munin::Plugin::SNMP->session();

if (defined $ARGV[0] and $ARGV[0] eq "config")
{
    my ($host, undef, undef, undef) = Munin::Plugin::SNMP->config_session();
    print "host_name $host\n" unless $host eq 'localhost';
    print "graph_title $host CPU \n";
    print "graph_args --base 1000 -r --lower-limit 0 --upper-limit 100\n";
    print "graph_vlabel CPU \n";
    print "graph_category cpu\n";
    print "graph_info This graph shows cpu busy value for the $host in percent.\n";
    print "graph_order ";
    foreach (sort keys %oids)
    {
        print "$_ ";
    }
    print "\n";
    foreach my $k (sort keys %oids)
    {
        print "$k.info The cpu $oids{$k} value in percent\n";
        print "$k.label $oids{$k}\n";
        print "$k.min 0\n";
        print "$k.draw AREASTACK\n";
        print "$k.type GAUGE\n";
    }
    exit 0;
}

my $values = $session->get_hash
(
    -baseoid => '1.3.6.1.4.1.789.1.2.1',
    -cols =>
    {
#       1  => 'cpuUpTime',
#       2  => 'cpuBusyTime',
        3  => 'cpuBusyTimePerCent',
#       4  => 'cpuIdleTime',
        5  => 'cpuIdleTimePerCent',
#       6  => 'cpuCount',
#       7  => 'cpuSwitchInvocations',
#       8  => 'cpuContextSwitches',
#       9  => 'cpuInterrupts',
#       10 => 'cpuNonCPInterrupts',
#       11 => 'cpuCPInterruptPercent',
#       12 => 'cpuNonCPInterruptPercent',
#       13 => 'cpuTotalDomainSwitches',
    },
);

foreach my $k (keys %oids)
{
    my $v = 'U';
    $v = $values->{0}->{$k} if (defined $values);
    print "$k.value $v\n";
}

exit 0;

__END__