TIMETRA-MPLS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, IpAddress, Counter64, Counter32, Integer32, Gauge32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF RowStatus, RowPointer, TruthValue, TimeStamp, TimeInterval, TestAndIncr, TEXTUAL-CONVENTION FROM SNMPv2-TC InterfaceIndexOrZero FROM IF-MIB InetAddressIPv6 FROM INET-ADDRESS-MIB MplsLabel, MplsLSPID, mplsXCLspId, mplsInSegmentEntry, mplsOutSegmentEntry FROM MPLS-LSR-MIB mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, mplsTunnelARHopEntry, MplsTunnelIndex FROM MPLS-TE-MIB TmnxAdminState, TmnxOperState, TNamedItem, TNamedItemOrEmpty, TmnxActionType, TmnxVRtrMplsLspID, TmnxRsvpDSTEClassType, TLNamedItemOrEmpty, TmnxMplsTpGlobalID, TmnxMplsTpNodeID, TmnxEnabledDisabled, TmnxTimeInterval, TPolicyStatementNameOrEmpty, TLNamedItem, TmnxCBFClasses FROM TIMETRA-TC-MIB timetraSRMIBModules, tmnxSRObjs, tmnxSRNotifyPrefix, tmnxSRConfs FROM TIMETRA-GLOBAL-MIB vRtrID, vRtrIfIndex FROM TIMETRA-VRTR-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB ; timetraMplsMIBModule MODULE-IDENTITY LAST-UPDATED "201601010000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia SROS Support Web: http://www.nokia.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision the MPLS extensions for the Nokia SROS device. Copyright 2003-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "201601010000Z" DESCRIPTION "Rev 14.0 1 Jan 2016 00:00 14.0 release of the TIMETRA-MPLS-MIB." REVISION "201501010000Z" DESCRIPTION "Rev 13.0 1 Jan 2015 00:00 13.0 release of the TIMETRA-MPLS-MIB." REVISION "201401010000Z" DESCRIPTION "Rev 12.0 1 Jan 2014 00:00 12.0 release of the TIMETRA-MPLS-MIB." REVISION "201102010000Z" DESCRIPTION "Rev 9.0 1 Feb 2011 00:00 9.0 release of the TIMETRA-MPLS-MIB." REVISION "200902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-MPLS-MIB." REVISION "200807010000Z" DESCRIPTION "Rev 6.1 01 Jul 2008 00:00 6.1 release of the TIMETRA-MPLS-MIB." REVISION "200801010000Z" DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 6.0 release of the TIMETRA-MPLS-MIB." REVISION "200701010000Z" DESCRIPTION "Rev 5.0 01 Jan 2007 00:00 5.0 release of the TIMETRA-MPLS-MIB." REVISION "200603230000Z" DESCRIPTION "Rev 4.0 23 Mar 2006 00:00 4.0 release of the TIMETRA-MPLS-MIB." REVISION "200508310000Z" DESCRIPTION "Rev 3.0 31 Aug 2005 00:00 3.0 release of the TIMETRA-MPLS-MIB." REVISION "200501240000Z" DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 2.1 release of the TIMETRA-MPLS-MIB." REVISION "200401150000Z" DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 2.0 release of the TIMETRA-MPLS-MIB." REVISION "200308150000Z" DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 1.2 release of the TIMETRA-MPLS-MIB." REVISION "200009070000Z" DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 1.0 Release of the TIMETRA-MPLS-MIB." REVISION "200008140000Z" DESCRIPTION "Rev 0.1 14 Aug 2000 00:00 Initial version of the TIMETRA-MPLS-MIB." ::= { timetraSRMIBModules 6 } tmnxMplsObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 6 } tmnxMplsConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 6 } tmnxMplsNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 6 } tmnxMplsNotifications OBJECT IDENTIFIER ::= { tmnxMplsNotifyPrefix 0 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- MPLS extensions -- -- Textual Conventions TmnxMplsLspFailCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsLspFailCode is an enumerated integer that defines the reason for LSP Path and LSP Crossconnect failure." SYNTAX INTEGER { noError (0), admissionControlError (1), noRouteToDestination (2), trafficControlSystemError (3), routingError (4), noResourcesAvailable (5), badNode (6), routingLoop (7), labelAllocationError (8), badL3PID (9), tunnelLocallyRepaired (10), unknownObjectClass (11), unknownCType (12), noEgressMplsInterface (13), noEgressRsvpInterface (14), looseHopsInFRRLsp (15), unknown (16), retryExceeded (17), noCspfRouteOwner (18), noCspfRouteToDestination (19), hopLimitExceeded (20), looseHopsInManualBypassLsp (21), emptyPathInManualBypassLsp (22), lspFlowControlled (23), srlgSecondaryNotDisjoint (24), srlgPrimaryCspfDisabled (25), srlgPrimaryPathDown (26), localLinkMaintenance (27), unexpectedCtObject (28), unsupportedCt (29), invalidCt (30), invCtAndSetupPri (31), invCtAndHoldPri (32), invCtAndSetupAndHoldPri (33), localNodeMaintenance (34), softPreemption (35), p2mpNotSupported (36), badXro (37), localNodeInXro (38), routeBlockedByXro (39), xroTooComplex (40), rsvpNotSupported (41), conflictingAdminGroups (42), nodeInIgpOverload (43), srTunnelDown(44), fibAddFailed(45), labelStackExceeded(46), pccDown(47), pccError(48), pceDown(49), pceError(50) } TmnxMplsLabelOwner ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsLabelOwner is an enumerated integer that specifies the module that owns a particular MPLS label." SYNTAX INTEGER { none (0), rsvp (1), tldp (2), ildp (3), svcmgr (4), bgp (5), mirror (6), static (7), vprn (8), sr (9) } TmnxMplsOperDownReasonCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsOperDownReasonCode is an enumerated integer that specifies the reason that the MPLS instance is operationally down." SYNTAX INTEGER { operUp (0), -- Operationally up adminDown (1), -- Administratively down noResources (2), -- No resources available systemIpDown (3), -- System IP interface is -- operationally down iomFailure (4), -- Iom failure clearDown (5) -- Clear command in progress } TmnxMplsMBBType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsMBBType is an enumerated integer that specifies the type of make-before-break (MBB)." SYNTAX INTEGER { none (0), --no MBB in progress or no last MBB configChange (1), timerBasedResignal (2), manualResignal (3), globalRevert (4), delayedRetry (5), gracefulShutdown (6), softPreemption (7), pathChange (8), autoBandwidth (9), pceLspUpdate(10) } TmnxMplsP2mpInstFailCode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsP2mpInstFailCode is an enumerated integer that defines the reason for P2MP instance going down." SYNTAX INTEGER { noError (0), noS2LOperational (1) } TmnxMplsRouterId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The value of TmnxMplsRouterId provides a 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router." SYNTAX Unsigned32 (0..'FFFFFFFF'h) TmnxMplsLspAutoBWLastAdjCause ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsLspAutoBWLastAdjCause is an enumerated integer that specifies cause of auto-bandwidth last adjustment." SYNTAX INTEGER { none (0), manual (1), normal (2), overflow (3), vllCAC (4), underflow (5), activePathChange (6) } TmnxMplsLspBgpRSVPLSPTunState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsLspBgpRSVPLSPTunState is an enumerated integer that specifies whether an RSVP LSP is allowed or blocked in its usage as a transport LSP for BGP tunnel routes. In 'include(1)' mode, an RSVP LSPs is allowed to be used as transport LSP for BGP tunnel routes. In 'exclude(2)' mode, an RSVP LSP is not allowed to be used as a transport LSP for BGP tunnel routes." SYNTAX INTEGER { include (1), exclude (2) } TmnxMplsLspAddrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxMplsLspAddrType is an enumerated integer that specifies the address type for an MPLS LSP." SYNTAX INTEGER { ipv4 (1), nodeId (2) } -- -- The Virtual Router MPLS Labeled Switch Path (LSP) Table -- vRtrMplsLspTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system." ::= { tmnxMplsObjs 1 } vRtrMplsLspEntry OBJECT-TYPE SYNTAX VRtrMplsLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires vRtrMplsLspName to have been assigned a valid value." INDEX { vRtrID, vRtrMplsLspIndex } ::= { vRtrMplsLspTable 1 } VRtrMplsLspEntry ::= SEQUENCE { vRtrMplsLspIndex TmnxVRtrMplsLspID, vRtrMplsLspRowStatus RowStatus, vRtrMplsLspLastChange TimeStamp, vRtrMplsLspName TLNamedItemOrEmpty, vRtrMplsLspAdminState TmnxAdminState, vRtrMplsLspOperState TmnxOperState, vRtrMplsLspFromAddr IpAddress, vRtrMplsLspToAddr IpAddress, vRtrMplsLspType INTEGER, vRtrMplsLspOutSegIndx Integer32, vRtrMplsLspRetryTimer Unsigned32, vRtrMplsLspRetryLimit Unsigned32, vRtrMplsLspMetric Unsigned32, vRtrMplsLspDecrementTtl TruthValue, vRtrMplsLspCspf TruthValue, vRtrMplsLspFastReroute TruthValue, vRtrMplsLspFRHopLimit Unsigned32, vRtrMplsLspFRBandwidth Unsigned32, vRtrMplsLspClassOfService TNamedItemOrEmpty, vRtrMplsLspSetupPriority Unsigned32, vRtrMplsLspHoldPriority Unsigned32, vRtrMplsLspRecord TruthValue, vRtrMplsLspPreference Unsigned32, vRtrMplsLspBandwidth Integer32, vRtrMplsLspBwProtect TruthValue, vRtrMplsLspHopLimit Unsigned32, vRtrMplsLspNegotiatedMTU Unsigned32, vRtrMplsLspRsvpResvStyle INTEGER, vRtrMplsLspRsvpAdspec TruthValue, vRtrMplsLspFRMethod INTEGER, vRtrMplsLspFRNodeProtect TruthValue, vRtrMplsLspAdminGroupInclude Unsigned32, vRtrMplsLspAdminGroupExclude Unsigned32, vRtrMplsLspAdaptive TruthValue, vRtrMplsLspInheritance Unsigned32, vRtrMplsLspOptimizeTimer Unsigned32, vRtrMplsLspOperFastReroute TruthValue, vRtrMplsLspFRObject TruthValue, vRtrMplsLspHoldTimer Unsigned32, vRtrMplsLspCspfTeMetricEnabled TruthValue, vRtrMplsLspP2mpId Unsigned32, vRtrMplsLspClassType TmnxRsvpDSTEClassType, vRtrMplsLspOperMetric Unsigned32, vRtrMplsLspLdpOverRsvpInclude TruthValue, vRtrMplsLspLeastFill TruthValue, vRtrMplsLspVprnAutoBindInclude TruthValue, vRtrMplsLspMainCTRetryLimit Unsigned32, vRtrMplsLspIgpShortcut TruthValue, vRtrMplsLspOriginTemplate TNamedItemOrEmpty, vRtrMplsLspAutoBandwidth TruthValue, vRtrMplsLspCspfToFirstLoose TruthValue, vRtrMplsLspPropAdminGroup TruthValue, vRtrMplsLspBgpShortcut TruthValue, vRtrMplsLspBgpTransportTunnel TmnxMplsLspBgpRSVPLSPTunState, vRtrMplsLspSwitchStbyPath TmnxActionType, vRtrMplsLspSwitchStbyPathIndex MplsTunnelIndex, vRtrMplsLspSwitchStbyPathForce TruthValue, vRtrMplsLspExcludeNodeAddrType InetAddressType, vRtrMplsLspExcludeNodeAddr InetAddress, vRtrMplsLspIgpShortcutLfaType INTEGER, vRtrMplsLspToAddrType TmnxMplsLspAddrType, vRtrMplsLspFromAddrType TmnxMplsLspAddrType, vRtrMplsLspToNodeId TmnxMplsTpNodeID, vRtrMplsLspFromNodeId TmnxMplsTpNodeID, vRtrMplsLspDestGlobalId TmnxMplsTpGlobalID, vRtrMplsLspDestTunnelNum Unsigned32, vRtrMplsLspFRPropAdminGroup TruthValue, vRtrMplsLspIgpShortcutRelOffset Integer32, vRtrMplsLspRevertTimer Unsigned32, vRtrMplsLspRevertTimeRemain Unsigned32, vRtrMplsLspLoadBalancingWeight Unsigned32, vRtrMplsLspClassFwdingEnabled TruthValue, vRtrMplsLspFC TmnxCBFClasses, vRtrMplsLspBfdTemplateName TNamedItemOrEmpty, vRtrMplsLspBfdEnable TruthValue, vRtrMplsLspBfdPingIntvl Unsigned32 } vRtrMplsLspIndex OBJECT-TYPE SYNTAX TmnxVRtrMplsLspID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsLspIndex specifies the Labeled Switch Path (LSP) index for this virtual router in the Nokia SROS system. It is a unique value among entries with the same value of vRtrID." ::= { vRtrMplsLspEntry 1 } vRtrMplsLspRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation, deletion, or control of vRtrMplsLspTable entries. Before the row can be placed into the 'active' state vRtrMplsLspName must have been assigned a valid value." ::= { vRtrMplsLspEntry 2 } vRtrMplsLspLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUpTime when this row was last modified." ::= { vRtrMplsLspEntry 3 } vRtrMplsLspName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "Administrative name for this Labeled Switch Path. The vRtrMplsLspName must be unique within a virtual router instance. When the value of the object vRtrMplsLspType is 'p2mpAuto', LSPs are auto-created dynamically by the system using LSP template values configured in the associated row entry of vRtrMplsLspTemplateTable. For auto-created LSPs, vRtrMplsLspName can have a maximum of 64 characters which consists of vRtrMplsLspTemplateName, vRtrID and MTTM(Multicast Tunnel Table Manager)Identifier. If vRtrMplsLspType is not 'p2mpAuto', 'meshP2p' or 'oneHopP2p', vRtrMplsLspName can have a maximum of 32 characters. " ::= { vRtrMplsLspEntry 4 } vRtrMplsLspAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this LSP." DEFVAL { inService } ::= { vRtrMplsLspEntry 5 } vRtrMplsLspOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this LSP." ::= { vRtrMplsLspEntry 6 } vRtrMplsLspFromAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrMplsLspFromAddr specifies the source address of this LSP. When vRtrMplsLspFromAddrType is 'ipv4', vRtrMplsLspFromAddr should also be specified. If vRtrMplsLspFromAddr has not been explicitly set, the system IP address will be used." ::= { vRtrMplsLspEntry 7 } vRtrMplsLspToAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrMplsLspToAddr specifies the destination address of this LSP. When vRtrMplsLspToAddrType is 'ipv4', vRtrMplsLspToAddr should also be specified." ::= { vRtrMplsLspEntry 8 } vRtrMplsLspType OBJECT-TYPE SYNTAX INTEGER { unknown (1), dynamic (2), static (3), bypassOnly (4), p2mpLsp (5), p2mpAuto (6), mplsTp (7), meshP2p (8), oneHopP2p (9), srTe (10) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object vRtrMplsLspType specifies whether the label value is statically or dynamically assigned or whether the LSP will be used exclusively for bypass protection. The value 'p2mpLsp' will be used to indicate point to multipoint LSPs used for multicast traffic. When the value of the vRtrMplsLspType is 'p2mpAuto', it specifies that the LSP is auto-created dynamically by the system and the row entry is dynamically created by the system using LSP Template values configured in the associated row entry of vRtrMplsLspTemplateTable. The value 'mplsTp' specifies that the LSP is an MPLS-TP Static LSP. When the value of the vRtrMplsLspType is 'meshP2p', it specifies that the LSP is a mesh point-to-point created dynamically by the system and the row entry is dynamically created by the system using Mesh LSP Template values configured in the associated row entry of vRtrMplsLspTemplateTable. When the value of the vRtrMplsLspType is 'oneHopP2p', it specifies that the LSP is a one-hop point-to-point LSP created dynamically by the system and the row entry is dynamically created by the system using One-Hop LSP Template values configured in the associated row entry of vRtrMplsLspTemplateTable. When the value of vRtrMplsLspType is set to 'segmentRouting', it specifies that the LSP is used for segment routing and vRtrMplsLspType can only be set to 'segmentRouting' when the value of vRtrMplsLspIndex is greater than 65535. A 'wrongValue' error is returned if an attempt is made to set an object in the row entry where the value of vRtrMplsLspType is 'p2mpAuto'." DEFVAL { dynamic } ::= { vRtrMplsLspEntry 9 } vRtrMplsLspOutSegIndx OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrMplsLspOutSegIndx is the index value of the entry in the mplsOutSegmentTable associated with this vRtrMplsLspEntry when vRtrMplsLspType is 'static'. If vRtrMplsLspType is 'dynamic', the value of this object will be zero (0)." DEFVAL { 0 } ::= { vRtrMplsLspEntry 10 } vRtrMplsLspRetryTimer OBJECT-TYPE SYNTAX Unsigned32 (1..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspRetryTimer specifies the time in seconds the software will wait before attempting the establish the failed LSP." DEFVAL { 30 } ::= { vRtrMplsLspEntry 11 } vRtrMplsLspRetryLimit OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspRetryLimit specifies the number of attempts the software should make to reestablish a failed LSP before the LSP is disabled. A value of 0 indicates that an infinite number of retry attempts should be made." DEFVAL { 0 } ::= { vRtrMplsLspEntry 12 } vRtrMplsLspMetric OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspMetric specifies the metric for this LSP which is used to select an LSP among a set of LSPs which are destined to the same egress 7x50 router. The LSP with the lowest metric will be selected. In LDP-over-RSVP, LDP performs a lookup in the Routing Table Manager (RTM) which provides the next hop to the destination PE and the advertising router (ABR or destination PE itself). If the advertising router matches the targeted LDP peer, LDP then performs a second lookup for the advertising router in the Tunnel Table Manager (TTM). This lookup returns the best RSVP LSP to use to forward packets for an LDP FEC learned through the targeted LDP session. The lookup returns the LSP with the lowest metric. If multiple LSPs have the same metric, then the result of the lookup will be to select the first one available in the TTM. A value of '0' indicates metric is not to be used." DEFVAL { 0 } ::= { vRtrMplsLspEntry 13 } vRtrMplsLspDecrementTtl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When the value of vRtrMplsLspDecrementTtl is 'true', the ingress ESR writes the TTL of the IP packet into the label and each transit ESR decrements the TTL in the label. At the egress ESR the TTL value from the label is written into the IP packet. When the value of vRtrMplsLspDecrementTtl is 'false', the ingress ESR ignores the IP packet TTL and writes the value of 255 into the label; and the egress ESR does not write the label's TTL into the IP packet. This object was made obsolete in release 11.0." DEFVAL { true } ::= { vRtrMplsLspEntry 14 } vRtrMplsLspCspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrMplsLspCspf is 'true', CSPF computation for constrained-path LSP is enabled. When the value of vRtrMplsLspCspf is 'false' CSPF computation is disabled." DEFVAL { false } ::= { vRtrMplsLspEntry 15 } vRtrMplsLspFastReroute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrMplsLspFastReroute is 'true', fast reroute is enabled. A pre-computed detour LSP is created from each node in the primary path of this LSP. In case of a failure of a link or LSP between two nodes, traffic is immediately rerouted on the pre-computed detour LSP thus avoiding packet loss. Each node along the primary path of the LSP tries to establish a detour LSP as follows: Each upstream node will setup a detour LSP that avoids only the immediate downstream node and merges back onto the actual path of the LSP as soon as possible. The detour LSP may take one or more hops (up to the value of vRtrMplsLspFRHopLimit) before merging back onto the main LSP path. When the upstream node detects a downstream link or node failure, it immediately send traffic for that LSP on the detour path and at the same time signals back to the ingress ESR about the failure. Fast reroute applies only to the primary path of this LSP. No configuration is required on the transit hops of the LSP. The ingress ESR will signal all intermediate ESRs using RSVP to setup their detours. When the value of vRtrMplsLspFastReroute is 'false', fast rerouting is disabled." DEFVAL { false } ::= { vRtrMplsLspEntry 16 } vRtrMplsLspFRHopLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspFRHopLimit specifies the total number of hops a detour LSP can take before merging back onto the main LSP path." DEFVAL { 16 } ::= { vRtrMplsLspEntry 17 } vRtrMplsLspFRBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "mega-bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspFRBandwidth specified the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the detour LSP. A value of zero (0) indicates that no bandwidth is reserved." DEFVAL { 0 } ::= { vRtrMplsLspEntry 18 } vRtrMplsLspClassOfService OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspClassOfService. The EXP bits in the MPLS header are set based on the global mapping table that specified the mapping between the forwarding class and the EXP bits. When class of service is specified, all packets will be marked with the same EXP bits that match the vRtrMplsLspClassOfService name in the mapping table. An empty string, ''H, specifies no class of service. Packets are assigned EXP bits based on the same mapping table, however each packet is marked with EXP bits based on the forwarding class from which it is serviced. When the value of vRtrMplsLspPathCosSource is set to 'inherit', the value of vRtrMplsLspClassOfService is applied to that specific LSP/path. This object was made obsolete in release 11.0." DEFVAL { ''H } ::= { vRtrMplsLspEntry 19 } vRtrMplsLspSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the value of vRtrMplsLspPathSetupPriority is set to '-1', the value of vRtrMplsLspSetupPriority is applied to that specific LSP/path." DEFVAL { 7 } ::= { vRtrMplsLspEntry 20 } vRtrMplsLspHoldPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the value of vRtrMplsLspPathHoldPriority is set to '-1', the value of vRtrMplsLspHoldPriority is applied to that specific LSP/path." DEFVAL { 0 } ::= { vRtrMplsLspEntry 21 } vRtrMplsLspRecord OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrMplsLspRecord is 'true', recording of all the hops that a LSP traverses is enabled. When the value of vRtrMplsLspRecord is 'false, recording of all the hops that a LSP traverses is disabled." DEFVAL { true } ::= { vRtrMplsLspEntry 22 } vRtrMplsLspPreference OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMplsLspPreference specifies the preference for the LSP. This value is used for load balancing between multiple LSPs that exist between the same ingress and egress routers. By default, traffic is load balanced among the LSPs, since all LSPs have the same preference. To prefer one LSP over another, change the preference value for that LSP. The LSP with the lowest preference is used. This object was made obsolete in release 11.0." DEFVAL { 255 } ::= { vRtrMplsLspEntry 23 } vRtrMplsLspBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "mega-bits per second" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMplsLspBandwidth specifies the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the LSP. A value of zero (0) indicates that no bandwidth is reserved. When vRtrMplsLspPathBandwidth is set to -1, the value of vRtrMplsLspBandwidth is applied to that specific LSP/path." DEFVAL { 0 } ::= { vRtrMplsLspEntry 24 } vRtrMplsLspBwProtect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When vRtrMplsLspBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will be used for EF services where customers need guaranteed bandwidth. It is expected that multiple EF services will be assigned to a single LSP. When bandwidth protection is enabled on an LSP, each time this LSP is used for a certain service the bandwidth allocated on that service is deducted from the bandwidth reserved for the LSP. Once the bandwidth is exhausted on the LSP, the ESR will provide feedback to the provider indicating that this LSP has exhausted its resources. This object was made obsolete in release 11.0." DEFVAL { false } ::= { vRtrMplsLspEntry 25 } vRtrMplsLspHopLimit OBJECT-TYPE SYNTAX Unsigned32 (2..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egress ESRs. A LSP will not be setup if the hop limit is exceeded. When the value of vRtrMplsLspPathHopLimit is set to zero (0), the value of vRtrMplsLspHopLimit is applied to that specific LSP/path." DEFVAL { 255 } ::= { vRtrMplsLspEntry 26 } vRtrMplsLspNegotiatedMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during LSP establishment." DEFVAL { 0 } ::= { vRtrMplsLspEntry 27 } vRtrMplsLspRsvpResvStyle OBJECT-TYPE SYNTAX INTEGER { se (1), ff (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspRsvpResvStyle specifies the reservation style for RSVP. The reservation style can be set to 'Shared- Explicit' (se) or 'Fixed-Filter' (ff)." DEFVAL { se } ::= { vRtrMplsLspEntry 28 } vRtrMplsLspRsvpAdspec OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC object will be included in RSVP messages. When the value of vRtrMplsLspRsvpAdspec is 'false', the ADSPEC object will not be included in RSVP messages." DEFVAL { false } ::= { vRtrMplsLspEntry 29 } vRtrMplsLspFRMethod OBJECT-TYPE SYNTAX INTEGER { oneToOneBackup(1), facilityBackup(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspFRMethod specifies the fast reroute method used. In the 'One-to-one Backup' method, a backup LSP is established which will intersect the original LSP somewhere downstream of the point of link or node failure. For each LSP that is backed up, a separate backup LSP is established. In the 'Facility Backup' method, instead of creating a separate LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. Such an LSP tunnel is called a 'bypass tunnel'." DEFVAL { oneToOneBackup } ::= { vRtrMplsLspEntry 30 } vRtrMplsLspFRNodeProtect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables node protection i.e. protection against the failure of a node on the LSP. Setting the value to 'false' disables node protection." DEFVAL { true } ::= { vRtrMplsLspEntry 31 } vRtrMplsLspAdminGroupInclude OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when this LSP is setup. If bit 'n' is set, then the admin group with value 'n' is included for this LSP. This implies that each link that this LSP goes through must be associated with at least one of the admin groups in the include list. By default, all admin groups are in the include list." DEFVAL { '00000000'H } ::= { vRtrMplsLspEntry 32 } vRtrMplsLspAdminGroupExclude OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when this LSP is setup. If bit 'n' is set, then the admin group with value 'n' is excluded for this LSP. This implies that each link that this LSP goes through must not be associated with any of the admin groups in the exclude list. By default, no admin groups are in the exclude list." DEFVAL { '00000000'H } ::= { vRtrMplsLspEntry 33 } vRtrMplsLspAdaptive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of vRtrMplsLspAdaptive to 'true' enables make-before-break functionality for the LSP. When the attributes of an already established LSP are changed, either through manual configuration or due to a change in network topology, make-before-break functionality ensures that the resources of the existing LSP will not be released until a new path (with the same LSP Id) has been established and traffic flowing over the existing path is seamlessly transferred to the new path. Setting the value to 'false' disables make-before-break functionality." DEFVAL { true } ::= { vRtrMplsLspEntry 34 } vRtrMplsLspInheritance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrMplsGeneralTable, there is bit within vRtrMplsLspInheritance that controls whether to inherit the operational value of the object or use the administratively set value. Non mask bits will always have value of zero. This object is a bit-mask, with the following positions: vRtrMplsLspOptimizeTimer 0x1 vRtrMplsLspFRObject 0x2 vRtrMplsLspHoldTimer 0x4 vRtrMplsLspDestGlobalId 0x8 vRtrMplsLspDestTunnelNum 0x10 vRtrMplsLspFromNodeId 0x20 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsGeneralTable." DEFVAL { 0 } -- by default inherit everything from vRtrMplsGeneralTable ::= { vRtrMplsLspEntry 35 } vRtrMplsLspOptimizeTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSP. When CSPF is enabled, changes in the network topology may cause the existing path of a loose-hop LSP to become sub-optimal. Such LSPs can be re-optimized and re-routed through more optimal paths by recalculating the path for the LSP at periodic intervals. This interval is controlled by the optimize timer. A value of 0 indicates that optimization has been disabled. When the vRtrMplsLspOptimizeTimer bit in vRtrMplsLspInheritance is cleared (0), the value returned in the GET request is inherited from vRtrMplsGeneralOptimizeTimer." DEFVAL { 0 } ::= { vRtrMplsLspEntry 36 } vRtrMplsLspOperFastReroute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspOperFastReroute indicates whether the operational LSP has fast reroute enabled or disabled. When make-before-break functionality for the LSP is enabled and if the fast reroute setting is changed, the resources for the existing LSP will not be released until a new path with the new attribute settings has been established. While a new path is being signaled, the administrative value and the operational values of fast reroute setting for the LSP may differ. The value of vRtrMplsLspFastReroute specifies the setting used for the new LSP path trying to be established whereas the value of vRtrMplsLspOperFastReroute specifies the setting for the existing LSP path." ::= { vRtrMplsLspEntry 37 } vRtrMplsLspFRObject OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or without the fast reroute object. The value of vRtrMplsLspFRObject is ignored if fast reroute is disabled for the LSP or if the LSP is using 'One-to-one Backup'. When the vRtrMplsLspFRObject bit in vRtrMplsLspInheritance is cleared (0), the value returned in the GET request is inherited from vRtrMplsGeneralFRObject." DEFVAL { true } ::= { vRtrMplsLspEntry 38 } vRtrMplsLspHoldTimer OBJECT-TYPE SYNTAX Unsigned32 (0..10) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming its data plane and declaring the lsp up to the service module. The value of vRtrMplsLspHoldTimer is inherited from the value of vRtrMplsGeneralHoldTimer." DEFVAL { 1 } ::= { vRtrMplsLspEntry 39 } vRtrMplsLspCspfTeMetricEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE metric would be used for the purpose of the LSP path computation by CSPF. When the value of this object is 'false', the IGP metric is used to compute the path of the LSP by CSPF." DEFVAL { false } ::= { vRtrMplsLspEntry 40 } vRtrMplsLspP2mpId OBJECT-TYPE SYNTAX Unsigned32 (0|1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspP2mpId specifies a unique identifier known as point to multipoint (P2MP) identifier (ID)." DEFVAL { 0 } ::= { vRtrMplsLspEntry 41 } vRtrMplsLspClassType OBJECT-TYPE SYNTAX TmnxRsvpDSTEClassType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspClassType specifies the class type (CT) associated with this LSP." DEFVAL { 0 } ::= { vRtrMplsLspEntry 42 } vRtrMplsLspOperMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspOperMetric indicates the operational metric for the LSP." ::= { vRtrMplsLspEntry 43 } vRtrMplsLspLdpOverRsvpInclude OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspLdpOverRsvpInclude specifies that this LSP can be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS) will subsequently provide LDP with all ECMP IGP next-hops and tunnel endpoints that it considers to be the lowest cost path to the destination. If an IGP calculation and an LDP over RSVP produce the same cost then LDP will always prefer an LDP over RSVP tunnel over an IGP route. By default, static and dynamic LSPs will be included when they are created. The default value for p2mp and bypass-only LSPs will be 'false'." DEFVAL { true } ::= { vRtrMplsLspEntry 44 } vRtrMplsLspLeastFill OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspLeastFill specifies whether the use of the least-fill path selection method for the computation of the path of this LSP is enabled. By default, the path of an LSP is randomly chosen among a set of equal cost paths." DEFVAL { false } ::= { vRtrMplsLspEntry 45 } vRtrMplsLspVprnAutoBindInclude OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspVprnAutoBindInclude specifies whether the LSP can be used as part of the auto-bind feature for VPRN services. By default a LSP is available for inclusion to be used for the auto-bind feature. By default, static and dynamic LSPs will be included when they are created. The default value for p2mp and bypass-only LSPs will be 'false'." DEFVAL { true } ::= { vRtrMplsLspEntry 46 } vRtrMplsLspMainCTRetryLimit OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspMainCTRetryLimit specifies the number of attempts the software should make before it can start using the backup class type." DEFVAL { 0 } ::= { vRtrMplsLspEntry 47 } vRtrMplsLspIgpShortcut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspIgpShortcut specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving IGP routes. When the value of vRtrMplsLspIgpShortcut is set to 'true' the RSVP LSP is used as a shortcut while resolving IGP routes. When the value of vRtrMplsLspIgpShortcut is set to 'false' the RSVP LSP is not used as a shortcut while resolving IGP routes. When the value of vRtrMplsLspIgpShortcut is changed, the value of vRtrMplsLspIgpShortcutLfaType is reset to its default value." DEFVAL { true } ::= { vRtrMplsLspEntry 48 } vRtrMplsLspOriginTemplate OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "When the value of the vRtrMplsLspType is 'p2mpAuto', the value of vRtrMplsLspOriginTemplate indicates the LSP Template which was used to create this LSP. For all other types of LSPs, the value of vRtrMplsLspOriginTemplate is an empty string." ::= { vRtrMplsLspEntry 49 } vRtrMplsLspAutoBandwidth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the vRtrMplsLspAutoBandwidth specifies whether automatic bandwidth adjustment has been enabled or disabled for this LSP. A value of 'true' specifies that automatic bandwidth adjustment has been enabled for this LSP and a value of 'false' specifies that automatic bandwidth adjustment has been disabled for this LSP." DEFVAL { false } ::= { vRtrMplsLspEntry 50 } vRtrMplsLspCspfToFirstLoose OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of the vRtrMplsLspCspfToFirstLoose specifies whether the CSPF calculation till the first loose hop on ingress Label Edge Router (LER) is enabled or disabled for this Labeled Switched Path(LSP). By default, the value of vRtrMplsLspCspfToFirstLoose is 'false' which specifies that the CSPF calculation is done to the destination of LSP. This object was deprecated in the 11.0 release." DEFVAL { false } ::= { vRtrMplsLspEntry 51 } vRtrMplsLspPropAdminGroup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the vRtrMplsLspPropAdminGroup specifies whether the propagation of session attribute object with resource affinity (C-type 1) in PATH message is enabled. By default, the value of vRtrMplsLspPropAdminGroup is 'false' which specifies the session attribute object without resource affinity (C-Type 7) is propagated in PATH message and the admin-groups are ignored on Label Switched Router(LSR) while doing CSPF calculation." DEFVAL { false } ::= { vRtrMplsLspEntry 52 } vRtrMplsLspBgpShortcut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspBgpShortcut specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving BGP routes. When the value of vRtrMplsLspBgpShortcut is set to 'true' the RSVP LSP is used as a shortcut while resolving BGP routes. When the value of vRtrMplsLspBgpShortcut is set to 'false' the RSVP LSP is not used as a shortcut while resolving BGP routes." DEFVAL { true } ::= { vRtrMplsLspEntry 53 } vRtrMplsLspBgpTransportTunnel OBJECT-TYPE SYNTAX TmnxMplsLspBgpRSVPLSPTunState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspBgpTransportTunnel specifies whether an RSVP LSP is allowed or blocked in its usage as a transport LSP for BGP tunnel routes. When the value of vRtrMplsLspBgpTransportTunnel is set to 'include' an RSVP LSP is allowed to be used as a transport LSP for BGP tunnel routes. When the value of vRtrMplsLspBgpTransportTunnel is set to 'exclude' an RSVP LSP is not allowed to be used as a transport LSP for BGP tunnel routes." DEFVAL { include } ::= { vRtrMplsLspEntry 54 } vRtrMplsLspSwitchStbyPath OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspSwitchStbyPath specifies whether to trigger the switch from the current active standby LSP path to a new LSP path as specified by vRtrMplsLspSwitchStbyPathIndex. When SET to the value of 'doAction', if the LSP path is actively on a current standby path, signaling will be initiated to switch to the new path. If a signal is triggered while a re-signaling is already in progress, the old transient state will be destroyed and a new transaction will be triggered. This variable must be set along with vRtrMplsLspSwitchStbyPathIndex to indicate the specific path index to switch to. An SNMP GET request on this object should return 'notApplicable'." ::= { vRtrMplsLspEntry 55 } vRtrMplsLspSwitchStbyPathIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspSwitchStbyPathIndex specifies the index for the new standby LSP path in mplsTunnelTable. vRtrMplsLspSwitchStbyPath must also be set to 'doAction' for the new standby LSP path to be selected. A value of 0 specifies that the best active path will be selected." DEFVAL { 0 } ::= { vRtrMplsLspEntry 56 } vRtrMplsLspSwitchStbyPathForce OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspSwitchStbyPathForce specifies whether to force a switch from an active LSP path to a new standby path as specified by the values of vRtrMplsLspSwitchStbyPathIndex and vRtrMplsLspSwitchStbyPath. When vRtrMplsLspSwitchStbyPathForce variable is specified vRtrMplsLspSwitchStbyPathIndex and vRtrMplsLspSwitchStbyPath must be also be specified. A value of 'true' for vRtrMplsLspSwitchStbyPathForce specifies a forced switch. A value of 'false' specifies no forced switch." DEFVAL { false } ::= { vRtrMplsLspEntry 57 } vRtrMplsLspExcludeNodeAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspExcludeNodeAddrType specifies the type of vRtrMplsLspExcludeNodeAddr." ::= { vRtrMplsLspEntry 58 } vRtrMplsLspExcludeNodeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrMplsLspExcludeNodeAddr is set to non-zero value, XRO (Exclude Routers) object will be included in bypass path message with supplied IP address. SET the value to 0.0.0.0 to disable." ::= { vRtrMplsLspEntry 59 } vRtrMplsLspIgpShortcutLfaType OBJECT-TYPE SYNTAX INTEGER { none (0), lfaProtect (1), lfaOnly (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspIgpShortcutLfaType specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving IGP routes in LFA SPF or whether to exclude or include a RSVP LSP from being used as a LFA SPF. When the value of vRtrMplsLspIgpShortcutLfaType is set to 'lfaProtect' the RSVP LSP is used as a shortcut while resolving IGP routes in LFA SPF as well. When the value of vRtrMplsLspIgpShortcutLfaType is set to 'lfaOnly' the RSVP LSP is used as a LFA SPF and not used as igp-shortcut in regular SPF. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when the value of the object vRtrMplsLspIgpShortcut is not set to 'true'." DEFVAL { none } ::= { vRtrMplsLspEntry 60 } vRtrMplsLspToAddrType OBJECT-TYPE SYNTAX TmnxMplsLspAddrType MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrMplsLspToAddrType object is an enumerated value that specifies the destination address type of the LSP. The value of 'ipv4' specifies an IPv4 address and vRtrMplsLspToAddr should be configured. The value of 'nodeId' specifies an MPLS-TP node id and vRtrMplsLspToNodeId should be configured." DEFVAL { ipv4 } ::= { vRtrMplsLspEntry 61 } vRtrMplsLspFromAddrType OBJECT-TYPE SYNTAX TmnxMplsLspAddrType MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrMplsLspFromAddrType object is an enumerated value that specifies the source address type of the LSP. When the value of vRtrMplsLspFromAddrType is 'ipv4', it specifies an IPv4 address type and vRtrMplsLspFromAddr should be configured. When the value of vRtrMplsLspFromAddrType is 'nodeId', it specifies an MPLS-TP node id type." DEFVAL { ipv4 } ::= { vRtrMplsLspEntry 62 } vRtrMplsLspToNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspToNodeId specifies the destination node id of an MPLS-TP Static LSP. vRtrMplsLspToNodeId is configured when vRtrMplsLspToAddrType is set to 'nodeId'." DEFVAL { 0 } ::= { vRtrMplsLspEntry 63 } vRtrMplsLspFromNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspFromNodeId indicates the source node id of an MPLS-TP Static LSP." ::= { vRtrMplsLspEntry 64 } vRtrMplsLspDestGlobalId OBJECT-TYPE SYNTAX TmnxMplsTpGlobalID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspDestGlobalId specifies the global identifier for an MPLS-TP Static LSP. A value of 0 indicates that a locally configured global identifier is to be used." DEFVAL { 0 } ::= { vRtrMplsLspEntry 65 } vRtrMplsLspDestTunnelNum OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..61440) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspDestTunnelNum specifies the destination tunnel number of an MPLS-TP Static LSP." DEFVAL { 0 } ::= { vRtrMplsLspEntry 66 } vRtrMplsLspFRPropAdminGroup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspFRPropAdminGroup specifies whether or not the use of administrative group constraints on a FRR backup LSP is enabled. If vRtrMplsLspFastReroute is set to 'true', the value of vRtrMplsLspFRPropAdminGroup specifies whether or not the administrative group constraints are signaled in the vRtrMplsLspFastReroute object. If vRtrMplsLspFastReroute is set to 'false', the value of vRtrMplsLspFRPropAdminGroup is ignored." DEFVAL { false } ::= {vRtrMplsLspEntry 67 } vRtrMplsLspIgpShortcutRelOffset OBJECT-TYPE SYNTAX Integer32 (-10 .. 10 | 2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspIgpShortcutRelOffset specifies the the relative offset to the IGP metric on the SPF tree. The SPF tree is updated with the current IGP metric of the path between the endpoints of the LSP minus the value of vRtrMplsLspIgpShortcutRelOffset. The default value of 2147483647 indicates the relative metric offset is not to be considered." DEFVAL { 2147483647 } ::= { vRtrMplsLspEntry 68 } vRtrMplsLspRevertTimer OBJECT-TYPE SYNTAX Unsigned32 (0|1..4320) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspRevertTimer specifies a revert timer for a Labeled Switch Path (LSP). When the value of vRtrMplsLspRevertTimer is set to '0', it cancels any revert timer that is currently running and causes the Labeled Switch Path (LSP) to revert to the primary path immediately if it is up. When the value of vRtrMplsLspRevertTimer is set to any non-zero value of revert interval, the Labeled Switch Path (LSP) will be switched to the primary path only after the revert interval is over." DEFVAL { 0 } ::= { vRtrMplsLspEntry 69 } vRtrMplsLspRevertTimeRemain OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspRevertTimeRemain indicates the time remaining in minutes before the revert timer would expire causing an lsp revert to primary path." ::= { vRtrMplsLspEntry 70 } vRtrMplsLspLoadBalancingWeight OBJECT-TYPE SYNTAX Unsigned32 (0|1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspLoadBalancingWeight specifies the load balancing weight applied to this Labeled Switch Path(LSP). When a system level load-balancing command is enabled, packets forwarded to a set of ECMP tunnel next-hops will be sprayed using this weight configured for this LSP." DEFVAL { 0 } ::= { vRtrMplsLspEntry 71 } vRtrMplsLspClassFwdingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspClassFwdingEnabled specifies whether class based forwarding over this MPLS LSP is enabled or not." DEFVAL { false } ::= { vRtrMplsLspEntry 72 } vRtrMplsLspFC OBJECT-TYPE SYNTAX TmnxCBFClasses MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspFC specifies a set of forwarding classes configured for this LSP expressed as a bit map. If a bit from 0 through 7 is set, then the corresponding forwarding class has been configured for this LSP. If bit 8 is set, the LSP has been designated as the default forwarding LSP." DEFVAL { { } } ::= { vRtrMplsLspEntry 73 } vRtrMplsLspBfdTemplateName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspBfdTemplateName specifies the TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP." ::= { vRtrMplsLspEntry 74 } vRtrMplsLspBfdEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspBfdEnable specifies whether BFD is enabled or not for this LSP." DEFVAL { false } ::= { vRtrMplsLspEntry 75 } vRtrMplsLspBfdPingIntvl OBJECT-TYPE SYNTAX Unsigned32 (0|60..300) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspBfdPingIntvl specifies the time interval for periodic LSP ping for BFD bootstrapping. When the value of vRtrMplsLspBfdPingIntvl is set to '0', it disables LSP pings for BFD bootstrapping." DEFVAL { 60 } ::= { vRtrMplsLspEntry 76 } -- -- -- The Virtual Router MPLS Labeled Switch Path (LSP) Statistics Table -- -- Augmentation of the vRtrMplsLspTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsLspTable, and the augmenting table, -- vRtrMplsLspStatTable. This in effect extends the vRtrMplsLspTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsLspTable results in -- the same fate for the row in the vRtrMplsLspStatTable. -- vRtrMplsLspStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspStatTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system." ::= { tmnxMplsObjs 2 } vRtrMplsLspStatEntry OBJECT-TYPE SYNTAX VRtrMplsLspStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrMplsLspEntry } ::= { vRtrMplsLspStatTable 1 } VRtrMplsLspStatEntry ::= SEQUENCE { vRtrMplsLspOctets Counter64, vRtrMplsLspPackets Counter64, vRtrMplsLspAge TmnxTimeInterval, vRtrMplsLspTimeUp TmnxTimeInterval, vRtrMplsLspTimeDown TmnxTimeInterval, vRtrMplsLspPrimaryTimeUp TmnxTimeInterval, vRtrMplsLspTransitions Counter32, vRtrMplsLspLastTransition TmnxTimeInterval, vRtrMplsLspPathChanges Counter32, vRtrMplsLspLastPathChange TmnxTimeInterval, vRtrMplsLspConfiguredPaths Integer32, vRtrMplsLspStandbyPaths Integer32, vRtrMplsLspOperationalPaths Integer32, vRtrMplsLspConfP2mpInstances Gauge32, vRtrMplsLspStatsEgrIndexUnAvail TruthValue } vRtrMplsLspOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may be subject to several minutes delay. The delay is controllable by MPLS statistics gathering interval, which by default is once every 5 minutes. If MPLS statistics gathering is not enabled, this number will not increment." ::= { vRtrMplsLspStatEntry 1 } vRtrMplsLspPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may be subject to several minutes delay. The delay is controllable by MPLS statistics gathering interval, which by default is once every 5 minutes. If MPLS statistics gathering is not enabled, this number will not increment." ::= { vRtrMplsLspStatEntry 2 } vRtrMplsLspAge OBJECT-TYPE SYNTAX TmnxTimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The age (i.e., time from creation till now) of this LSP in 10-millisecond periods." ::= { vRtrMplsLspStatEntry 3 } vRtrMplsLspTimeUp OBJECT-TYPE SYNTAX TmnxTimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The total time in 10-millisecond units that this LSP has been been operational. For example, the percentage up time can be determined by computing (vRtrMplsLspTimeUp/vRtrMplsLspAge * 100 %)." ::= { vRtrMplsLspStatEntry 4 } vRtrMplsLspTimeDown OBJECT-TYPE SYNTAX TmnxTimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The total time in 10-millisecond units that this LSP has not been operational." ::= { vRtrMplsLspStatEntry 5 } vRtrMplsLspPrimaryTimeUp OBJECT-TYPE SYNTAX TmnxTimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The total time in 10-millisecond units that this LSP's primary path has been operational. For example, the percentage contribution of the primary path to the operational time is given by (vRtrMplsLspPrimaryTimeUp/vRtrMplsLspTimeUp * 100) %." ::= { vRtrMplsLspStatEntry 6 } vRtrMplsLspTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of state transitions (up -> down and down -> up) this LSP has undergone." ::= { vRtrMplsLspStatEntry 7 } vRtrMplsLspLastTransition OBJECT-TYPE SYNTAX TmnxTimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time in 10-millisecond units since the last transition occurred on this LSP." ::= { vRtrMplsLspStatEntry 8 } vRtrMplsLspPathChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it." ::= { vRtrMplsLspStatEntry 9 } vRtrMplsLspLastPathChange OBJECT-TYPE SYNTAX TmnxTimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The time in 10-millisecond units since the last change occurred on this LSP." ::= { vRtrMplsLspStatEntry 10 } vRtrMplsLspConfiguredPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of paths configured for this LSP." ::= { vRtrMplsLspStatEntry 11 } vRtrMplsLspStandbyPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of standby paths configured for this LSP." ::= { vRtrMplsLspStatEntry 12 } vRtrMplsLspOperationalPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of operational paths for this LSP. This includes the path currently active, as well as operational standby paths." ::= { vRtrMplsLspStatEntry 13 } vRtrMplsLspConfP2mpInstances OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspConfP2mpInstances indicates the number of p2mp instances configured for this LSP." ::= { vRtrMplsLspStatEntry 14 } vRtrMplsLspStatsEgrIndexUnAvail OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspStatsEgrIndexUnAvail indicates whether an MPLS LSP egress statistics index is available or not for the egress statistics." ::= { vRtrMplsLspStatEntry 15 } -- -- Virtual Router MPLS LSP to Path Mapping Table -- vRtrMplsLspPathTableSpinlock OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "voluntary serialization control for vRtrMplsLspPathTable. Primarily used by SNMP manager to coordinate changes to vRtrMplsLspPathInheritance." DEFVAL { 0 } ::= { tmnxMplsObjs 3 } vRtrMplsLspPathTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspPathTable provides an association between an LSP and a path. An LSP can have more than one path association, but only one of those paths can be specified as the primary path type. Paths are defined in as Tunnel entries in the mplsTunnelTable in the MPLS-TE-MIB." ::= { tmnxMplsObjs 4 } vRtrMplsLspPathEntry OBJECT-TYPE SYNTAX VRtrMplsLspPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable. Entries in this table can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires vRtrMplsLspPathType to have been assigned a valid value." INDEX { vRtrID, vRtrMplsLspIndex, mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId } ::= { vRtrMplsLspPathTable 1 } VRtrMplsLspPathEntry ::= SEQUENCE { vRtrMplsLspPathRowStatus RowStatus, vRtrMplsLspPathLastChange TimeStamp, vRtrMplsLspPathType INTEGER, vRtrMplsLspPathCos INTEGER, vRtrMplsLspPathProperties BITS, vRtrMplsLspPathBandwidth Integer32, vRtrMplsLspPathBwProtect TruthValue, vRtrMplsLspPathState INTEGER, vRtrMplsLspPathPreference INTEGER, vRtrMplsLspPathCosSource TruthValue, vRtrMplsLspPathClassOfService TNamedItemOrEmpty, vRtrMplsLspPathSetupPriority Unsigned32, vRtrMplsLspPathHoldPriority Unsigned32, vRtrMplsLspPathRecord INTEGER, vRtrMplsLspPathHopLimit Unsigned32, vRtrMplsLspPathSharing TruthValue, vRtrMplsLspPathAdminState TmnxAdminState, vRtrMplsLspPathOperState TmnxOperState, vRtrMplsLspPathInheritance Unsigned32, vRtrMplsLspPathLspId MplsLSPID, vRtrMplsLspPathRetryTimeRemaining Unsigned32, vRtrMplsLspPathTunnelARHopListIndex Integer32, vRtrMplsLspPathNegotiatedMTU Unsigned32, vRtrMplsLspPathFailCode TmnxMplsLspFailCode, vRtrMplsLspPathFailNodeAddr IpAddress, vRtrMplsLspPathAdminGroupInclude Unsigned32, vRtrMplsLspPathAdminGroupExclude Unsigned32, vRtrMplsLspPathAdaptive TruthValue, vRtrMplsLspPathOptimizeTimer Unsigned32, vRtrMplsLspPathNextOptimize Unsigned32, vRtrMplsLspPathOperBandwidth Integer32, vRtrMplsLspPathMBBState INTEGER, vRtrMplsLspPathResignal TmnxActionType, vRtrMplsLspPathTunnelCRHopListIndex Integer32, vRtrMplsLspPathOperMTU Unsigned32, vRtrMplsLspPathRecordLabel INTEGER, vRtrMplsLspPathSrlg TruthValue, vRtrMplsLspPathSrlgDisjoint TruthValue, vRtrMplsLspPathLastResigAttempt TimeStamp, vRtrMplsLspPathMetric Unsigned32, vRtrMplsLspPathLastMBBType TmnxMplsMBBType, vRtrMplsLspPathLastMBBEnd TimeStamp, vRtrMplsLspPathLastMBBMetric Unsigned32, vRtrMplsLspPathLastMBBState INTEGER, vRtrMplsLspPathMBBTypeInProg TmnxMplsMBBType, vRtrMplsLspPathMBBStarted TimeStamp, vRtrMplsLspPathMBBNextRetry Unsigned32, vRtrMplsLspPathMBBRetryAttempts Unsigned32, vRtrMplsLspPathMBBFailCode TmnxMplsLspFailCode, vRtrMplsLspPathMBBFailNodeArType InetAddressType, vRtrMplsLspPathMBBFailNodeAddr InetAddress, vRtrMplsLspPathClassType TmnxRsvpDSTEClassType, vRtrMplsLspPathOperMetric Unsigned32, vRtrMplsLspPathResignalEligible TruthValue, vRtrMplsLspPathIsFastRetry TruthValue, vRtrMplsLspPathBackupCT Integer32, vRtrMplsLspPathMainCTRetryRem Unsigned32, vRtrMplsLspPathOperCT Integer32, vRtrMplsLspPathNewPathIndex MplsTunnelIndex, vRtrMplsLspPathMBBMainCTRetryRem Unsigned32, vRtrMplsLspPathSigBWMBBInProg Unsigned32, vRtrMplsLspPathSigBWLastMBB Unsigned32, vRtrMplsLspPathActiveByManual INTEGER, vRtrMplsLspPathTimeoutIn Unsigned32, vRtrMplsLspPathMBBTimeoutIn Unsigned32, vRtrMplsLspPathBfdTemplateName TNamedItemOrEmpty, vRtrMplsLspPathBfdEnable TruthValue, vRtrMplsLspPathBfdPingIntvl Unsigned32, vRtrMplsLspPathLastUpdateTime TimeStamp, vRtrMplsLspPathLastUpdateId Unsigned32, vRtrMplsLspPathLastUpdateState INTEGER, vRtrMplsLspPathLastUpdFailCode TmnxMplsLspFailCode } vRtrMplsLspPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'active' state vRtrMplsLspPathType must have been assigned a valid value." ::= { vRtrMplsLspPathEntry 1 } vRtrMplsLspPathLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUpTime when this row was last modified." ::= { vRtrMplsLspPathEntry 2 } vRtrMplsLspPathType OBJECT-TYPE SYNTAX INTEGER { other (1), primary (2), standby (3), secondary (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This variable is an enum that represents the role this path is taking within this LSP." ::= { vRtrMplsLspPathEntry 3 } vRtrMplsLspPathCos OBJECT-TYPE SYNTAX INTEGER (0..7 | 255) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The configured Class Of Service (COS) for this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If the value is 255, the value in the COS field of the label will depend on other factors. This object was made obsolete in release 11.0." DEFVAL { 255 } ::= { vRtrMplsLspPathEntry 4 } vRtrMplsLspPathProperties OBJECT-TYPE SYNTAX BITS { record-route (0), adaptive (1), cspf (2), mergeable (3), fast-reroute (4), pce-reported (5), pce-controlled (6), pce-computed (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The set of configured properties for this path expressed as a bit map. For example, if the path is an adaptive path, the bit corresponding to bit value 1 is set." ::= { vRtrMplsLspPathEntry 5 } vRtrMplsLspPathBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "mega-bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) to be reserved for this LSP path. A value of zero (0) indicates that no bandwidth is reserved." DEFVAL { 0 } ::= { vRtrMplsLspPathEntry 6 } vRtrMplsLspPathBwProtect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth protection is enabled on a LSP. LSPs that reserve bandwidth will be used for EF services where customers need guaranteed bandwidth. It is expected that multiple EF services will be assigned to a single LSP. When bandwidth protection is enabled on an LSP, each time this LSP is used for a certain service the bandwidth allocated on that service is deducted from the bandwidth reserved for the LSP. Once the bandwidth is exhausted on the LSP, the ESR will provide feedback to the provider indicating that this LSP has exhausted its resources. This object was made obsolete in release 11.0." DEFVAL { false } ::= { vRtrMplsLspPathEntry 7 } vRtrMplsLspPathState OBJECT-TYPE SYNTAX INTEGER { unknown (1), active (2), inactive (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current working state of this path within this LSP." DEFVAL { unknown } ::= { vRtrMplsLspPathEntry 8 } vRtrMplsLspPathPreference OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "When there is no path in the LSP with vRtrMplsLspPathType value of 'primary', 'secondary' type paths of this LSP with the same value of vRtrMplsLspPathPreference are used for load sharing. When a 'primary' type path exists in the LSP, vRtrMplsLspPathPreference is used to denote at which priority one 'secondary' path will supersede another when the 'primary' fails. 1 indicates the highest priority value. For LSP with vRtrMplsLspPathType value of 'standby' type paths the value of vRtrMplsLspPathPreference is in the range of (1..255). For path type 'primary' the value of vRtrMplsLspPathPreference is set to 0. For path type 'secondary' the value of vRtrMplsLspPathPreference is set to 255." DEFVAL { 255 } ::= { vRtrMplsLspPathEntry 9 } vRtrMplsLspPathCosSource OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When vRtrMplsLspPathCosSource is set to 'true', the value of vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService. When 'false', the value of vRtrMplsLspClassOfService is used. This object was made obsolete in release 11.0." DEFVAL { false } ::= { vRtrMplsLspPathEntry 10 } vRtrMplsLspPathClassOfService OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The name of the class of service value to be assigned to all packets on the LSP is specified with vRtrMplsLspPathClassOfService. The EXP bits in the MPLS header are set based on the global mapping table that specified the mapping between the forwarding class and the EXP bits. When class of service is specified, all packets will be marked with the same EXP bits that match the vRtrMplsLspPathClassOfService name in the mapping table. An empty string, ''H, specifies no class of service. Packets are assigned EXP bits based on the same mapping table, however each packet is marked with EXP bits based on the forwarding class from which it is serviced. This object was made obsolete in release 11.0." DEFVAL { ''H } ::= { vRtrMplsLspPathEntry 11 } vRtrMplsLspPathSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority." DEFVAL { 7 } ::= { vRtrMplsLspPathEntry 12 } vRtrMplsLspPathHoldPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority." DEFVAL { 0 } ::= { vRtrMplsLspPathEntry 13 } vRtrMplsLspPathRecord OBJECT-TYPE SYNTAX INTEGER { record (1), noRecord (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrMplsLspPathRecord is 'record', recording of all the hops that a LSP traverses is enabled. When the value of vRtrMplsLspPathRecord is 'noRecord', recording of all the hops that a LSP traverses is disabled." DEFVAL { record } ::= { vRtrMplsLspPathEntry 14 } vRtrMplsLspPathHopLimit OBJECT-TYPE SYNTAX Unsigned32 (2..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathHopLimit specifies the maximum number of hops that a LSP will traverse including the ingress and egress ESRs. A LSP will not be setup if the hop limit is exceeded. When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit." DEFVAL { 255 } ::= { vRtrMplsLspPathEntry 15 } vRtrMplsLspPathSharing OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When vRtrMplsLspPathSharing has a value of 'true', path-sharing is enabled for the secondary path. Path-sharing is used to control the hops of the secondary path. When vRtrMplsLspPathSharing have a value of 'false', CSPF attempts to find a path for the secondary that does not include any node or link that is common to the active primary path. This variable is valid only if vRtrMplsLspPathType is set to 'secondary'. This object was made obsolete in release 11.0." DEFVAL { false } ::= { vRtrMplsLspPathEntry 16 } vRtrMplsLspPathAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this LSP path." DEFVAL { inService } ::= { vRtrMplsLspPathEntry 17 } vRtrMplsLspPathOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of this LSP path." ::= { vRtrMplsLspPathEntry 18 } vRtrMplsLspPathInheritance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "For each writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrMplsLspTable, controls whether to inherit the operational value of that object, or use the administratively set value. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. This object is a bit-mask, with the following positions: vRtrMplsLspPathHopLimit 0x2000 vRtrMplsLspPathAdminGroupInclude 0x20000 vRtrMplsLspPathAdminGroupExclude 0x40000 vRtrMplsLspPathAdaptive 0x80000 vRtrMplsLspPathOptimizeTimer 0x100000 vRtrMplsLspPathClassType 0x1000000 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. The corresponding mask bit will be changed to one when SNMP SET is performed on any of the inherited objects (vRtrMplsLspPathHopLimit, vRtrMplsLspPathAdminGroupInclude, etc). When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsLspTable." DEFVAL { 0 } -- by default inherit everything from vRtrMplsLspTable ::= { vRtrMplsLspPathEntry 19 } vRtrMplsLspPathLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "This value identifies the label switched path that is signaled for this entry." ::= { vRtrMplsLspPathEntry 20 } vRtrMplsLspPathRetryTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time in 10-millisecond units to signal this path." ::= { vRtrMplsLspPathEntry 21 } vRtrMplsLspPathTunnelARHopListIndex OBJECT-TYPE SYNTAX Integer32 (0|1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is no recorded hop list associated with this LSP path." ::= { vRtrMplsLspPathEntry 22 } vRtrMplsLspPathNegotiatedMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the Maximum transmission unit (MTU) that is negotiated during establishment of this LSP Path." DEFVAL { 0 } ::= { vRtrMplsLspPathEntry 23 } vRtrMplsLspPathFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathFailCode indicates the reason code for LSP Path failure. A value of 0 indicates that no failure has occurred." ::= { vRtrMplsLspPathEntry 24 } vRtrMplsLspPathFailNodeAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathFailNodeAddr indicates the IP address of the node in the LSP path at which the LSP path failed. When no failure has occurred, this value is 0." ::= { vRtrMplsLspPathEntry 25 } vRtrMplsLspPathAdminGroupInclude OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that specifies a list of admin groups that should be included when this LSP path is setup. If bit 'n' is set, then the admin group with value 'n' is included for this LSP path. This implies that each link that this LSP path goes through must be associated with at least one of the admin groups in the include list. When the vRtrMplsLspPathAdminGroupInclude bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspAdminGroupInclude." DEFVAL { '00000000'H } ::= { vRtrMplsLspPathEntry 26 } vRtrMplsLspPathAdminGroupExclude OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that specifies a list of admin groups that should be excluded when this LSP path is setup. If bit 'n' is set, then the admin group with value 'n' is excluded for this LSP path. This implies that each link that this LSP path goes through must not be associated with any of the admin groups in the exclude list. When the vRtrMplsLspPathAdminGroupExclude bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspAdminGroupExclude." DEFVAL { '00000000'H } ::= { vRtrMplsLspPathEntry 27 } vRtrMplsLspPathAdaptive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of vRtrMplsLspPathAdaptive to 'true', enables make-before-break functionality for the LSP path. Setting the value to 'false', disables make-before-break functionality for the path. When the vRtrMplsLspPathAdaptive bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspAdaptive." DEFVAL { true } ::= { vRtrMplsLspPathEntry 28 } vRtrMplsLspPathOptimizeTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSP path. When CSPF is enabled, changes in the network topology may cause the existing path of a loose-hop LSP to become sub-optimal. Such LSPs can be re-optimized and re-routed through more optimal paths by recalculating the path for the LSP at periodic intervals. This interval is controlled by the optimize timer. A value of 0 indicates that optimization has been disabled. When the vRtrMplsLspPathOptimizeTimer bit in vRtrMplsLspPathInheritance is cleared (0), the value returned in the GET request is inherited from vRtrMplsLspOptimizeTimer." DEFVAL { 0 } ::= { vRtrMplsLspPathEntry 29 } vRtrMplsLspPathNextOptimize OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathNextOptimize indicates the current value of the optimize timer. This is the time, in seconds, remaining till the optimize timer will expire and optimization will be started for the LSP path." ::= { vRtrMplsLspPathEntry 30 } vRtrMplsLspPathOperBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "mega-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperBandwidth indicates the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserved for the operational LSP path. When make-before-break functionality for the LSP is enabled and if the path bandwidth is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new bandwidth settings has been established. While a new path is being signaled, the administrative value and the operational values of the path bandwidth may differ. The value of vRtrMplsLspPathBandwidth specifies the bandwidth requirements for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperBandwidth specifies the bandwidth reserved for the existing LSP path." ::= { vRtrMplsLspPathEntry 31 } vRtrMplsLspPathMBBState OBJECT-TYPE SYNTAX INTEGER { none (1), success (2), inProgress (3), fail (4) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrMplsLspPathMBBState indicates the state of the most recent invocation of the make-before-break functionality. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful inProgress (3) - make-before-break in progress fail (4) - make-before-break failed. This object was made obsolete in release 6.0 R4 and replaced with vRtrMplsLspPathLastMBBState." ::= { vRtrMplsLspPathEntry 32 } vRtrMplsLspPathResignal OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers the re-signaling of the LSP path. If the LSP path is operationally down either due to network failure or due to the retry attempts count being exceeded, setting this variable to 'doAction' will initiate the signaling for the path. A make-before-break signaling for the path will be initiated if the LSP is operationally up but the make-before-break retry attempts count was exceeded. Make-before-break signaling will also be initiated for any LSP that is operationally up. This may be used to cause a loose-hop LSP to be optimized. If a re-signal is triggered while a re-signaling is already in progress, the old transient state will be destroyed and a new transaction being triggered. An SNMP GET request on this object should return 'notApplicable'." ::= { vRtrMplsLspPathEntry 33 } vRtrMplsLspPathTunnelCRHopListIndex OBJECT-TYPE SYNTAX Integer32 (0|1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there is no computed hop list associated with this LSP path." ::= { vRtrMplsLspPathEntry 34 } vRtrMplsLspPathOperMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperMTU indicates the size for the Maximum transmission unit (MTU) that is currently operation for this LSP Path." ::= { vRtrMplsLspPathEntry 35 } vRtrMplsLspPathRecordLabel OBJECT-TYPE SYNTAX INTEGER { record (1), noRecord (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrMplsLspPathRecordLabel is 'record', recording of labels at each node that a LSP traverses is enabled. When the value of vRtrMplsLspPathRecordLabel is 'noRecord', recording of labels at each node that a LSP traverses is disabled." DEFVAL { record } ::= { vRtrMplsLspPathEntry 36 } vRtrMplsLspPathSrlg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathSrlg specifies whether the use of SRLG constraint in the computation of a secondary path for an LSP at the head-end Label Edge Router (LER) is enabled. The value vRtrMplsLspPathSrlg is used only when the value of vRtrMplsLspPathType is 'secondary'. When the value of vRtrMplsLspPathSrlg is true, the use of SRLG constraint in the computation of a secondary path is enabled." DEFVAL { false } ::= { vRtrMplsLspPathEntry 37 } vRtrMplsLspPathSrlgDisjoint OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathSrlgDisjoint indicates whether the relevant standby lsp path is SRLG disjoint from the associated primary lsp path for an LSP at the head-end Label Edge Router (LER). The value vRtrMplsLspPathSrlgDisjoint is used only when the value of vRtrMplsLspPathType is 'standby'. When the value of vRtrMplsLspPathSrlgDisjoint is 'true', primary and standby lsp path do not have SRLG membership in common. When the value of vRtrMplsLspPathSrlgDisjoint is 'false', primary and standby lsp path have SRLG membership in common." ::= { vRtrMplsLspPathEntry 38 } vRtrMplsLspPathLastResigAttempt OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastResigAttempt indicates the sysUpTime when the last attempt to resignal this LSP was made." ::= { vRtrMplsLspPathEntry 39 } vRtrMplsLspPathMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMetric indicates the cost of the traffic engineered path returned by the IGP." ::= { vRtrMplsLspPathEntry 40 } vRtrMplsLspPathLastMBBType OBJECT-TYPE SYNTAX TmnxMplsMBBType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastMBBType indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted." ::= { vRtrMplsLspPathEntry 41 } vRtrMplsLspPathLastMBBEnd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastMBBEnd indicates the sysUpTime when the last MBB ended." ::= { vRtrMplsLspPathEntry 42 } vRtrMplsLspPathLastMBBMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastMBBMetric indicates the cost of the traffic engineered path for the LSP path prior to MBB." ::= { vRtrMplsLspPathEntry 43 } vRtrMplsLspPathLastMBBState OBJECT-TYPE SYNTAX INTEGER { none (1), success (2), fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastMBBState indicates whether the last Make-before-break was successful or failed. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful fail (3) - make-before-break failed." ::= { vRtrMplsLspPathEntry 44 } vRtrMplsLspPathMBBTypeInProg OBJECT-TYPE SYNTAX TmnxMplsMBBType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBTypeInProg indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is in progress." ::= { vRtrMplsLspPathEntry 45 } vRtrMplsLspPathMBBStarted OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBStarted indicates the sysUpTime when the in-progress MBB started." ::= { vRtrMplsLspPathEntry 46 } vRtrMplsLspPathMBBNextRetry OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBNextRetry indicates the amount of time remaining in seconds before the next attempt is made to retry the in-progress MBB." ::= { vRtrMplsLspPathEntry 47 } vRtrMplsLspPathMBBRetryAttempts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBRetryAttempts indicates 'n' where nth attempt for the MBB is in progress." ::= { vRtrMplsLspPathEntry 48 } vRtrMplsLspPathMBBFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBFailCode indicates the reason code for in-progress MBB failure. A value of 'none' indicates that no failure has occurred." ::= { vRtrMplsLspPathEntry 49 } vRtrMplsLspPathMBBFailNodeArType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBFailNodeArType indicates the type of vRtrMplsLspPathMBBFailNodeAddr. A value of 'unknown' indicates that no failure has occurred." ::= { vRtrMplsLspPathEntry 50 } vRtrMplsLspPathMBBFailNodeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBFailNodeAddr indicates the IP address of the node in the LSP path at which the in-progress MBB failed. A value of 'unknown' for vRtrMplsLspPathMBBFailNodeArType and empty string for vRtrMplsLspPathMBBFailNodeAddr indicates that no failure has occurred." ::= { vRtrMplsLspPathEntry 51 } vRtrMplsLspPathClassType OBJECT-TYPE SYNTAX TmnxRsvpDSTEClassType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathClassType specifies the class type (CT) associated with this LSP path. When the vRtrMplsLspPathClassType bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspClassType." DEFVAL { 0 } ::= { vRtrMplsLspPathEntry 52 } vRtrMplsLspPathOperMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperMetric indicates the operational metric for the LSP path." ::= { vRtrMplsLspPathEntry 53 } vRtrMplsLspPathResignalEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathResignalEligible indicates that the LSP path is eligible for re-signaling on the basis of available bandwidth." ::= { vRtrMplsLspPathEntry 54 } vRtrMplsLspPathIsFastRetry OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathIsFastRetry indicates which retry timer is being referred to by vRtrMplsLspPathRetryTimeRemaining. When the value of vRtrMplsLspPathIsFastRetry is set to 'true', vRtrMplsLspPathRetryTimeRemaining is referring to either the P2P active path fast timer, vRtrMplsGenP2pActPathFastRetry or the secondary fast retry timer, vRtrMplsGeneralSecFastRetryTimer. When the value of vRtrMplsLspPathIsFastRetry is set to 'false', vRtrMplsLspPathRetryTimeRemaining is referring to the LSP retry timer, vRtrMplsLspRetryTimer." ::= { vRtrMplsLspPathEntry 55 } vRtrMplsLspPathBackupCT OBJECT-TYPE SYNTAX Integer32 (-1|0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathBackupCT specifies the backup class type (CT) associated with the LSP. A value of -1 indicates that no backup class type has been configured for the LSP." DEFVAL { -1 } ::= { vRtrMplsLspPathEntry 56 } vRtrMplsLspPathMainCTRetryRem OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMainCTRetryRem indicates the number of remaining attempts the software should make before it can start using the backup class type for the LSP." ::= { vRtrMplsLspPathEntry 57 } vRtrMplsLspPathOperCT OBJECT-TYPE SYNTAX Integer32 (-1|0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperCT indicates operational class type (CT) associated with the LSP. A value of -1 indicates that no operational class type has been configured for the LSP" ::= { vRtrMplsLspPathEntry 58 } vRtrMplsLspPathNewPathIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathNewPathIndex specifies the index for the new path in mplsTunnelTable." DEFVAL { 0 } ::= { vRtrMplsLspPathEntry 59 } vRtrMplsLspPathMBBMainCTRetryRem OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBMainCTRetryRem indicates the number of remaining attempts the software should make before it can start using the backup class type for the LSP." ::= { vRtrMplsLspPathEntry 60 } vRtrMplsLspPathSigBWMBBInProg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathSigBWMBBInProg indicates the bandwidth used to signal the MBB currently in progress." ::= { vRtrMplsLspPathEntry 61 } vRtrMplsLspPathSigBWLastMBB OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathSigBWLastMBB indicates the bandwidth used to signal the last MBB that occurred." ::= { vRtrMplsLspPathEntry 62 } vRtrMplsLspPathActiveByManual OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), noForce (1), force (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathActiveByManual indicates whether a secondary standby path has become the active LSP path due to manual intervention. When vRtrMplsLspSwitchStbyPath is set to 'doAction' a manual switch is attempted. When vRtrMplsLspSwitchStbyPathForce is set to 'true' the manual switch is forced. When the value of vRtrMplsLspPathActiveByManual is set to 'notApplicable', the LSP path is active but not due to any manual intervention. When the value of vRtrMplsLspPathActiveByManual is set to 'noForce', the LSP path has become active by a manual switch specified by the user. When the value of vRtrMplsLspPathActiveByManual is set to 'force', the LSP path has become active by a forced manual switch executed by the user." ::= { vRtrMplsLspPathEntry 63 } vRtrMplsLspPathTimeoutIn OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathTimeoutIn indicates the amount of time remaining, in seconds, for the LSP path state to time out after the initial PATH message has been sent. If the timer expires and the LSP path has not become operationally up, the LSP path is torn down and the retry timer is started to schedule a new retry cycle." ::= { vRtrMplsLspPathEntry 64 } vRtrMplsLspPathMBBTimeoutIn OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathMBBTimeoutIn indicates the amount of time remaining, in seconds, for the in-progress MBB path state to time out after the initial PATH message has been sent. If the timer expires and the in-progress MBB path has not become operationally up, the MBB path is torn down and the retry timer is started to schedule a new retry cycle." ::= { vRtrMplsLspPathEntry 65 } vRtrMplsLspPathBfdTemplateName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathBfdTemplateName specifies the TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP path." ::= { vRtrMplsLspPathEntry 66 } vRtrMplsLspPathBfdEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathBfdEnable specifies whether BFD is enabled or not for this LSP path." DEFVAL { false } ::= { vRtrMplsLspPathEntry 67 } vRtrMplsLspPathBfdPingIntvl OBJECT-TYPE SYNTAX Unsigned32 (0|60..300) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathBfdPingIntvl specifies the time interval for periodic LSP ping for BFD bootstrapping. When the value of vRtrMplsLspPathBfdPingIntvl is set to '0', it disables LSP pings for BFD bootstrapping." DEFVAL { 60 } ::= { vRtrMplsLspPathEntry 68 } vRtrMplsLspPathLastUpdateTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastUpdateTime indicates the sysUpTime when the last update occurred" ::= { vRtrMplsLspPathEntry 69 } vRtrMplsLspPathLastUpdateId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastUpdateId indicates the last update ID which was processed." ::= { vRtrMplsLspPathEntry 70 } vRtrMplsLspPathLastUpdateState OBJECT-TYPE SYNTAX INTEGER { none (1), success (2), fail (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastUpdateState indicates whether the last update was successful or failed. Possible states are none (1) - no update invoked success (2) - update successful fail (3) - updated failed" ::= { vRtrMplsLspPathEntry 71 } vRtrMplsLspPathLastUpdFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathLastUpdFailCode indicates the reason code for in-progress update failure. A value of 'none' indicates that no failure has occurred." ::= { vRtrMplsLspPathEntry 72 } -- -- The Virtual Router MPLS LSP Path Statistics Table -- -- Augmentation of the vRtrMplsLspPathTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsLspPathTable, and the augmenting table, -- vRtrMplsLspPathStatTable. This in effect extends the vRtrMplsLspPathTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsLspPathTable results in -- the same fate for the row in the vRtrMplsLspPathStatTable. -- vRtrMplsLspPathStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspPathStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspPathStatTable has an entry for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable." ::= { tmnxMplsObjs 5 } vRtrMplsLspPathStatEntry OBJECT-TYPE SYNTAX VRtrMplsLspPathStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrMplsLspPathEntry } ::= { vRtrMplsLspPathStatTable 1 } VRtrMplsLspPathStatEntry ::= SEQUENCE { vRtrMplsLspPathTimeUp TimeInterval, vRtrMplsLspPathTimeDown TimeInterval, vRtrMplsLspPathRetryAttempts Unsigned32, vRtrMplsLspPathTransitionCount Counter32, vRtrMplsLspPathCspfQueries Counter32 } vRtrMplsLspPathTimeUp OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The total time in 10-millisecond units that this LSP path has been operational. For example, the percentage up time can be determined by computing (vRtrMplsLspPathTimeUp/vRtrMplsLspAge * 100 %)." ::= { vRtrMplsLspPathStatEntry 1 } vRtrMplsLspPathTimeDown OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The total time in 10-millisecond units that this LSP Path has not been operational." ::= { vRtrMplsLspPathStatEntry 2 } vRtrMplsLspPathRetryAttempts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unsuccessful attempts which have been made to signal this path. As soon as the path gets signalled, this is set to 0." ::= { vRtrMplsLspPathStatEntry 3 } vRtrMplsLspPathTransitionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object vRtrMplsLspPathTransitionCount maintains the number of transitions that have occurred for this LSP." ::= { vRtrMplsLspPathStatEntry 4 } vRtrMplsLspPathCspfQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathCspfQueries indicates the number of CSPF queries that have been made for this LSP path." ::= { vRtrMplsLspPathStatEntry 5 } -- -- Virtual Router MPLS LSP to Cross-connect Mapping Table -- vRtrMplsXCTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsXCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table has an entry for each mplsXCEntry in the mplsXCTable. It serves as an another indirect index to the mplsXCTable." ::= { tmnxMplsObjs 6 } vRtrMplsXCEntry OBJECT-TYPE SYNTAX VRtrMplsXCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents the indices to be used to search the mplsXCTable." INDEX { mplsXCLspId } ::= { vRtrMplsXCTable 1 } VRtrMplsXCEntry ::= SEQUENCE { vRtrMplsXCIndex Integer32, vRtrMplsInSegmentIfIndex InterfaceIndexOrZero, vRtrMplsInSegmentLabel MplsLabel, vRtrMplsOutSegmentIndex Integer32, vRtrMplsERHopTunnelIndex Integer32, vRtrMplsARHopTunnelIndex Integer32, vRtrMplsRsvpSessionIndex Unsigned32, vRtrMplsXCFailCode TmnxMplsLspFailCode, vRtrMplsXCCHopTableIndex Integer32 } vRtrMplsXCIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An index of the mplsXCTable. It represents mplsXCIndex, a field of the mplsXCTable." ::= { vRtrMplsXCEntry 1 } vRtrMplsInSegmentIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "An index of the mplsXCTable. It represents mplsInSegmentIfIndex of the mplsInSegmentTable." ::= { vRtrMplsXCEntry 2 } vRtrMplsInSegmentLabel OBJECT-TYPE SYNTAX MplsLabel MAX-ACCESS read-only STATUS current DESCRIPTION "An index of the mplsXCTable. It represents mplsInSegmentLabel of the mplsInSegmentTable." ::= { vRtrMplsXCEntry 3 } vRtrMplsOutSegmentIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "An index of the mplsXCTable. It represents mplsOutSegmentIndex of the mplsOutSegmentTable." ::= { vRtrMplsXCEntry 4 } vRtrMplsERHopTunnelIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index into the mplsTunnelHopTable identifying a particular recorded hop list (stores ERO in LSR)." ::= { vRtrMplsXCEntry 5 } vRtrMplsARHopTunnelIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list (stores RRO in LSR)." ::= { vRtrMplsXCEntry 6 } vRtrMplsRsvpSessionIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "An index into the TIMETRA-RSVP-MIB::vRtrRsvpSessionTable identifying a particular RSVP session." ::= { vRtrMplsXCEntry 7 } vRtrMplsXCFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsXCFailCode indicates the reason code for cross-connect failure. A value of 0 indicates that no failure occurred." ::= { vRtrMplsXCEntry 8 } vRtrMplsXCCHopTableIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the vRtrMplsTunnelCHopTable entries that specify the hops for the CSPF path for a detour LSP for this tunnel." ::= { vRtrMplsXCEntry 9 } -- -- Virtual Router MPLS General Table -- vRtrMplsGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsGeneralTable contains objects for general control and management of an MPLS protocol instance within a virtual router." ::= { tmnxMplsObjs 7 } vRtrMplsGeneralEntry OBJECT-TYPE SYNTAX VRtrMplsGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an instance of the MPLS protocol running within a virtual router. Entries in this table cannot be created and deleted via SNMP SET operations. An entry in this table is created by the agent when vRtrMplsStatus in the vRtrConfTable is set to 'create'. The entry is destroyed when vRtrMplsStatus is set to 'delete'" INDEX { vRtrID } ::= { vRtrMplsGeneralTable 1 } VRtrMplsGeneralEntry ::= SEQUENCE { vRtrMplsGeneralLastChange TimeStamp, vRtrMplsGeneralAdminState TmnxAdminState, vRtrMplsGeneralOperState TmnxOperState, vRtrMplsGeneralPropagateTtl TruthValue, vRtrMplsGeneralTE INTEGER, vRtrMplsGeneralNewLspIndex TestAndIncr, vRtrMplsGeneralOptimizeTimer Unsigned32, vRtrMplsGeneralFRObject TruthValue, vRtrMplsGeneralResignalTimer Unsigned32, vRtrMplsGeneralHoldTimer Unsigned32, vRtrMplsGeneralDynamicBypass TruthValue, vRtrMplsGeneralNextResignal Unsigned32, vRtrMplsGeneralOperDownReason TmnxMplsOperDownReasonCode, vRtrMplsGeneralSrlgFrr TruthValue, vRtrMplsGeneralSrlgFrrStrict TruthValue, vRtrMplsGeneralNewP2mpInstIndex TestAndIncr, vRtrMplsGeneralLeastFillMinThd Unsigned32, vRtrMplsGenLeastFillReoptiThd Unsigned32, vRtrMplsGeneralUseSrlgDB TruthValue, vRtrMplsGeneralP2mpResigTimer Unsigned32, vRtrMplsGeneralP2mpNextResignal Unsigned32, vRtrMplsGeneralSecFastRetryTimer Unsigned32, vRtrMplsGeneralShortTTLPropLocal TruthValue, vRtrMplsGeneralShortTTLPropTrans TruthValue, vRtrMplsGeneralStaticLspFRTimer Unsigned32, vRtrMplsGeneralAutoBWDefSampMul Unsigned32, vRtrMplsGeneralAutoBWDefAdjMul Unsigned32, vRtrMplsGeneralExpBackoffRetry TruthValue, vRtrMplsGeneralCspfOnLooseHop TruthValue, vRtrMplsGeneralP2PMaxByPassAssoc Unsigned32, vRtrMplsGenP2pActPathFastRetry Unsigned32, vRtrMplsGenP2mpS2lFastRetry Unsigned32, vRtrMplsGenLspInitRetryTimeout Unsigned32, vRtrMplsLoggerEventBundling TruthValue, vRtrMplsGenIssuMplsLockdown TruthValue, vRtrMplsGenFRAdminGroup TruthValue, vRtrMplsGenRetryOnIgpOverload TruthValue, vRtrMplsGenMbbPrefCurrentHops TruthValue, vRtrMplsGeneralBypassResigTimer Unsigned32, vRtrMplsGenBypassNextResignal Unsigned32, vRtrMplsGeneralNewLspSRIndex TestAndIncr, vRtrMplsGeneralPceReport BITS, vRtrMplsGeneralEntropyLblRsvpTe INTEGER } vRtrMplsGeneralLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUpTime when this row was last modified." ::= { vRtrMplsGeneralEntry 1 } vRtrMplsGeneralAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrMplsGeneralAdminState is set to 'inService', the agent attempts to enable the MPLS protocol instance on this router. When vRtrMplsGeneralAdminState is set to 'outOfService', the agent attempts to disable the MPLS protocol instance on this router." DEFVAL { inService } ::= { vRtrMplsGeneralEntry 2 } vRtrMplsGeneralOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrMplsGeneralOperState indicates the current operating state of this MPLS protocol instance on this router." ::= { vRtrMplsGeneralEntry 3 } vRtrMplsGeneralPropagateTtl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs, the ingress ESR writes the TTL of the IP packet in the label and each transit ESR decrements the TTL in the label. At the egress ESR the TTL value from the label is written into the IP packet. When vRtrMplsGeneralPropagateTtl is set to 'false', the ingress ESR ignores the IP packet TTl and writes the value of 255 into the label, while the egress ESR does not write the label TTL into the IP packet. This assumes that all ESRs have been configured to have vRtrMplsGeneralPropagateTtl set to 'false', or this may result in unpredictable behavior. This object was made obsolete in release 11.0." DEFVAL { true } ::= { vRtrMplsGeneralEntry 4 } vRtrMplsGeneralTE OBJECT-TYPE SYNTAX INTEGER { none (1), bgp (2), bgpigp (3) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMplsGeneralTE specifies the type of traffic engineering used with this MPLS instance. This object was made obsolete in release 11.0." DEFVAL { none } ::= { vRtrMplsGeneralEntry 5 } vRtrMplsGeneralNewLspIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to assign values to vRtrMplsLspIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrMplsLspEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions." ::= { vRtrMplsGeneralEntry 6 } vRtrMplsGeneralOptimizeTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSPs. When CSPF is enabled, changes in the network topology may cause the existing path of a loose-hop LSP to become sub-optimal. Such LSPs can be re-optimized and re-routed through more optimal paths by recalculating the path for the LSP at periodic intervals. This interval is controlled by the optimize timer. A value of 0 indicates that optimization has been disabled. The value for vRtrMplsGeneralOptimizeTimer is by default inherited by all LSPs and their paths." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 7 } vRtrMplsGeneralFRObject OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or without the fast reroute object. The value of vRtrMplsGeneralFRObject is ignored if fast reroute is disabled for the LSP or if the LSP is using 'One-to-one Backup'. The value for vRtrMplsGeneralFRObject is by default inherited by all LSPs." DEFVAL { true } ::= { vRtrMplsGeneralEntry 8 } vRtrMplsGeneralResignalTimer OBJECT-TYPE SYNTAX Unsigned32 (0|30..10080) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralResignalTimer specifies the value for the P2P (point-to-point) LSP resignal timer, that is the time, in minutes, the software will wait before attempting to resignal the P2P LSPs. When the resignal timer expires, if the new recorded hop list (RRO) for an P2P LSP has a better metric than the current recorded hop list, an attempt will be made to resignal that P2P LSP using the make-before-break mechanism. If the attempt to resignal an P2P LSP fails, the P2P LSP will continue to use the existing path and a resignal will be attempted the next time the timer expires. A value of 0 for the resignal timer indicates that timer-based P2P LSP resignalling has been disabled." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 9 } vRtrMplsGeneralHoldTimer OBJECT-TYPE SYNTAX Unsigned32 (0..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming its data plane and declaring the lsp up to the service module. A value of 0 indicates that the hold timer has been disabled." DEFVAL { 1 } ::= { vRtrMplsGeneralEntry 10 } vRtrMplsGeneralDynamicBypass OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic bypass tunnels are enabled. By default, dynamic bypass tunnels are enabled." DEFVAL { true } ::= { vRtrMplsGeneralEntry 11 } vRtrMplsGeneralNextResignal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire." ::= { vRtrMplsGeneralEntry 12 } vRtrMplsGeneralOperDownReason OBJECT-TYPE SYNTAX TmnxMplsOperDownReasonCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralOperDownReason indicates the reason due to which the MPLS instance is operationally down." ::= { vRtrMplsGeneralEntry 13 } vRtrMplsGeneralSrlgFrr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk Link Group (SRLG) constraint will be used in the computation of FRR bypass or detour to be associated with any primary LSP path on the system. When the value of vRtrMplsGeneralSrlgFrr is 'true' the use of SRLG constraint is enabled. By default, the use of SRLG constraint is disabled." DEFVAL { false } ::= { vRtrMplsGeneralEntry 14 } vRtrMplsGeneralSrlgFrrStrict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralSrlgFrrStrict specifies whether to associate the LSP with a bypass or signal a detour if a bypass or detour satisfies all other constraints except the SRLG constraints. When the value of vRtrMplsGeneralSrlgFrrStrict is 'true' and a path that meets SRLG constraints is not found, the bypass or detour is not setup. If this value is set to 'true' when vRtrMplsGeneralSrlgFrr is set to 'false', vRtrMplsGeneralSrlgFrr is set to 'true' also. By default, the value of vRtrMplsGeneralSrlgFrrStrict is 'false'." DEFVAL { false } ::= { vRtrMplsGeneralEntry 15 } vRtrMplsGeneralNewP2mpInstIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralNewP2mpInstIndex specifies the object that is used to assign values to vRtrMplsP2mpInstIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrMplsP2mpInstEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions." ::= { vRtrMplsGeneralEntry 16 } vRtrMplsGeneralLeastFillMinThd OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralLeastFillMinThd specifies in percentage the least minimum threshold parameter used in the least-fill path selection process. When comparing the percentage of least available link bandwidth across the sorted paths, whenever two percentages differ by less than the value configured as the vRtrMplsGeneralLeastFillMinThd, CSPF will consider them equal and will apply a random number generator to select the path among these paths. " DEFVAL { 5 } ::= { vRtrMplsGeneralEntry 17 } vRtrMplsGenLeastFillReoptiThd OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGenLeastFillReoptiThd specifies in percentage the least reoptimization threshold parameter used in the least-fill path selection process. During a timer-based re-signaling of an LSP path which has vRtrMplsLspLeastFill enabled, CSPF will first update the least-available bandwidth figure for the current path of this LSP. It then applies the least-fill path selection method to select a new path for this LSP. If the new computed path has the same cost as the current path, it will compare the least-available bandwidth figures of the two paths and if the difference exceeds vRtrMplsGenLeastFillReoptiThd, a trap will be generated to indicate that a better least-fill path is available for this LSP. " DEFVAL { 10 } ::= { vRtrMplsGeneralEntry 18 } vRtrMplsGeneralUseSrlgDB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralUseSrlgDB specifies whether the use of the user SRLG database by CSPF is enabled." DEFVAL { false } ::= { vRtrMplsGeneralEntry 19} vRtrMplsGeneralP2mpResigTimer OBJECT-TYPE SYNTAX Unsigned32 (0|60..10080) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralP2mpResigTimer specifies the value for the P2MP (point to multi point) LSP resignal timer, that is the time, in minutes, the software will wait before attempting to resignal the P2MP LSPs. When the resignal timer expires, an attempt to resignal the entire P2MP instance comprising all source to leaf (S2Ls) are done, the IGP or TE metric of the S2Ls are not taken into consideration. If the attempt to resignal an P2MP LSP fails, the P2MP LSP will continue to use the existing S2Ls and a resignal will be attempted the next time the timer expires. A value of 0 for the resignal timer indicates that timer-based P2MP LSP resignalling has been disabled." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 20 } vRtrMplsGeneralP2mpNextResignal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralP2mpNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralP2mpResigTimer to expire." ::= { vRtrMplsGeneralEntry 21 } vRtrMplsGeneralSecFastRetryTimer OBJECT-TYPE SYNTAX Unsigned32 (0..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralSecFastRetryTimer specifies the value, in seconds, used as fast retry timer for a secondary path. If the first attempt to setup a secondary path fails due to a path error, the fast retry timer will be started for the secondary path so that the path can be retried sooner. If the next attempt also fails, further retries for the path will use the configured value for LSP retry timer, vRtrMplsLspRetryTimer. If retry-timer for the LSP is configured to be less than the MPLS secondary-fast-retry-timer, all retries for the secondary path will use the LSP retry-timer. A value of 0 indicates that fast retry for secondary paths has been disabled." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 22 } vRtrMplsGeneralShortTTLPropLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralShortTTLPropLocal specifies whether or not to enable the propagation of time to live (TTL) from the IP packet header into the header of the resulting MPLS packet for all local packets forwarded over a LSP shortcut. When the value is 'true' TTL is propagated from the IP packet header into the header of the resulting MPLS packet." DEFVAL { true } ::= { vRtrMplsGeneralEntry 23 } vRtrMplsGeneralShortTTLPropTrans OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralShortTTLPropTrans specifies whether or not to enable the propagation of time to live (TTL) from the IP packet header into the header of the resulting MPLS packet for all transit packets forwarded over a LSP shortcut. When the value is 'true' TTL is propagated from the IP packet header into the header of the resulting MPLS packet." DEFVAL { true } ::= { vRtrMplsGeneralEntry 24 } vRtrMplsGeneralStaticLspFRTimer OBJECT-TYPE SYNTAX Unsigned32 (1..30) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralStaticLspFRTimer specifies the audit time for static LSPs which are not currently up." DEFVAL { 30 } ::= { vRtrMplsGeneralEntry 25 } vRtrMplsGeneralAutoBWDefSampMul OBJECT-TYPE SYNTAX Unsigned32 (1..511) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralAutoBWDefSampMul specifies the global default for collection intervals in a sample interval." DEFVAL { 1 } ::= { vRtrMplsGeneralEntry 26 } vRtrMplsGeneralAutoBWDefAdjMul OBJECT-TYPE SYNTAX Unsigned32 (1..16383) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralAutoBWDefAdjMul specifies the global default for collection intervals in an adjust interval." DEFVAL { 288 } ::= { vRtrMplsGeneralEntry 27 } vRtrMplsGeneralExpBackoffRetry OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralExpBackoffRetry specifies the state of Exponential Backoff Retry mechanism." DEFVAL { false } ::= { vRtrMplsGeneralEntry 28 } vRtrMplsGeneralCspfOnLooseHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralCspfOnLooseHop specifies whether the Constrained Shortest Path First (CSPF) calculation till the next loose hop is enabled or not." DEFVAL { false } ::= { vRtrMplsGeneralEntry 29 } vRtrMplsGeneralP2PMaxByPassAssoc OBJECT-TYPE SYNTAX Unsigned32 (100..131072) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralP2PMaxByPassAssoc specifies the maximum number of LSP primary paths that can associate with each manual or dynamic bypass point-to-point (P2P) LSP." DEFVAL { 1000 } ::= { vRtrMplsGeneralEntry 30 } vRtrMplsGenP2pActPathFastRetry OBJECT-TYPE SYNTAX Unsigned32 (0..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGenP2pActPathFastRetry specifies the time, in seconds, active path point-to-point (P2P) LSP waits before it attempts to re-establish itself. This timer is started after first attempt to setup active path P2P LSP fails. When vRtrMplsGenP2pActPathFastRetry is set to 0, fast retry timer for active path P2P LSP is disabled." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 31 } vRtrMplsGenP2mpS2lFastRetry OBJECT-TYPE SYNTAX Unsigned32 (0..10) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGenP2mpS2lFastRetry specifies the time, in seconds, active path point to multipoint (P2MP) source to leaf (S2L) LSP waits before it attempts to re-establish itself. This timer is started after first attempt to setup active path P2MP S2L LSP fails. When vRtrMplsGenP2mpS2lFastRetry is set to 0, fast retry timer for active path P2MP S2L LSP is disabled." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 32 } vRtrMplsGenLspInitRetryTimeout OBJECT-TYPE SYNTAX Unsigned32 (10..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGenLspInitRetryTimeout specifies the amount of time in seconds the software waits for an LSP path to come up after sending out the initial Path message. If the initial retry timeout period expires and the LSP path is not up, it is torn down and the LSP retry timer is started to schedule a new retry cycle using a new LSP-id." DEFVAL { 30 } ::= { vRtrMplsGeneralEntry 33 } vRtrMplsLoggerEventBundling OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLoggerEventBundling specifies whether or not the notification bundling mechanism is enabled. When the value of vRtrMplsLoggerEventBundling is set to 'true', all TIMETRA-SYSTEM-MIB::tmnxConfigCreate and TIMETRA-SYSTEM-MIB::tmnxConfigDelete notifications that are generated because of creation or deletion of entries in the vRtrMplsXCTable during quiet period of 2 minutes are bundled in a single notification. An entry is created or deleted in vRtrMplsXCTable when a RSVP session is created or deleted on this ingress, transit or egress router instance causing creation or deletion of an entry in TIMETRA-RSVP-MIB::vRtrRsvpSessionTable. A vRtrMplsXCBundleChange notification is generated after every quiet interval of 2 minutes if one or more RSVP session changed state and retained that state during the quiet interval. However if the state of the RSVP sessions does not remain stable for an entire quiet interval, the notification is generated after the maximum interval period of 10 minutes has elapsed." DEFVAL { false } ::= { vRtrMplsGeneralEntry 34 } vRtrMplsGenIssuMplsLockdown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenIssuMplsLockdown indicates if MPLS has entered the state of not accepting new requests for creation of LSP's(local/transit) during the minor ISSU(In Service Software Update) operation." ::= { vRtrMplsGeneralEntry 39 } vRtrMplsGenFRAdminGroup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGenFRAdminGroup specifies whether or not the use of administrative group constraints on a FRR backup LSP at a Point-of-Local Repair(PLR) node is enabled. When the value of vRtrMplsGenFRAdminGroup is set to 'true', each PLR node reads the admin group constraints in the FAST_REROUTE object in the Path message of the LSP primary path. If the FAST_REROUTE object is not included in the Path message, then the PLR will read the admin group constraints from the Session Attribute object in the Path message." DEFVAL { false } ::= { vRtrMplsGeneralEntry 40 } vRtrMplsGenRetryOnIgpOverload OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGenRetryOnIgpOverload specifies whether or not to teardown LSPs transiting through nodes that are in IGP overload state. When the value of vRtrMplsGenRetryOnIgpOverload is set to 'true' and a node is reporting that it is in IGP overload state, MPLS will tear- down and retry LSP paths that are transiting through the overloaded node. When the value of vRtrMplsGenRetryOnIgpOverload is set to 'false' and a node is reporting that it is in IGP overload state, MPLS will not tear down LSP paths that are transiting through the overloaded node." DEFVAL { false } ::= { vRtrMplsGeneralEntry 41 } vRtrMplsGenMbbPrefCurrentHops OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGenMbbPrefCurrentHops specifies whether or not Constrained Shortest Path First (CSPF) for a Make-before-break (MBB) path should give preference to hops/links used by the current Labeled Switch Path (LSP)." DEFVAL { false } ::= { vRtrMplsGeneralEntry 42 } vRtrMplsGeneralBypassResigTimer OBJECT-TYPE SYNTAX Unsigned32 (0|30..10080) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralBypassResigTimer specifies the value for the Bypass LSP resignal timer, that is the time, in minutes, the software will wait before attempting to resignal Bypass LSPs. When the resignal timer expires, if the new CSPF path for a Bypass LSP has a better metric than the current CSPF path, an attempt will be made to resignal that Bypass LSP. If the attempt to resignal the Bypass LSP fails, the FRR LSPs protected by that Bypass LSP will continue to use that Bypass LSP and a resignal will be attempted the next time the timer expires. A value of 0 for the resignal timer indicates that timer-based Bypass LSP resignalling has been disabled." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 43 } vRtrMplsGenBypassNextResignal OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenBypassNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralBypassResigTimer to expire." ::= { vRtrMplsGeneralEntry 44 } vRtrMplsGeneralNewLspSRIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralNewLspSRIndex is used to specify values assigned to vRtrMplsLspIndex for Segment Routing LSPs. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrMplsLspEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions. The range for Segment Routing LSPs is as specified in the textual convention for vRtrMplsLspIndex." ::= { vRtrMplsGeneralEntry 45 } vRtrMplsGeneralPceReport OBJECT-TYPE SYNTAX BITS { srTe(0) } MAX-ACCESS read-create STATUS current DESCRIPTION "The set of configured TE properties for this LSP expressed as a bit map." DEFVAL { {} } ::= { vRtrMplsGeneralEntry 46 } vRtrMplsGeneralEntropyLblRsvpTe OBJECT-TYPE SYNTAX INTEGER { forceDisable(1), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralEntropyLblRsvpTe specifies whether the application takes into account the value of Entropy Label and Entropy Label Capability in the label stack for RSVP-TE LSPs. When the value of vRtrMplsGeneralEntropyLblRsvpTe is set to 'enable', the application will account for EL/ELC in the label stack without taking into consideration the value of the enabled ELC. When the value of vRtrMplsGeneralEntropyLblRsvpTe is set to 'force-disable', the application will ignore the value of enabled ELC. When the value of vRtrMplsGeneralEntropyLblRsvpTe is modified, Entropy Label will become operational when this LSP is re-signaled. The default value of vRtrMplsGeneralEntropyLblRsvpTe is set to 'enable', when the system chassis mode is D. The default value of vRtrMplsGeneralEntropyLblRsvpTe is set to 'forceDisable', when the system chassis mode is less than D." DEFVAL { enable } ::= { vRtrMplsGeneralEntry 47 } -- -- Virtual Router MPLS General Statistics Table -- -- Augmentation of the vRtrMplsGeneralTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsGeneralTable, and the augmenting table, -- vRtrMplsGeneralStatTable. This in effect extends the vRtrMplsGeneralTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsGeneralTable results in -- the same fate for the row in the vRtrMplsGeneralStatTable. -- vRtrMplsGeneralStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsGeneralStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsGeneralStatTable contains statistics for an MPLS protocol instance within a virtual router." ::= { tmnxMplsObjs 8 } vRtrMplsGeneralStatEntry OBJECT-TYPE SYNTAX VRtrMplsGeneralStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for an instance of the MPLS protocol running within a virtual router. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrMplsGeneralEntry } ::= { vRtrMplsGeneralStatTable 1 } VRtrMplsGeneralStatEntry ::= SEQUENCE { vRtrMplsGeneralStaticLspOriginate Gauge32, vRtrMplsGeneralStaticLspTransit Gauge32, vRtrMplsGeneralStaticLspTerminate Gauge32, vRtrMplsGeneralDynamicLspOriginate Gauge32, vRtrMplsGeneralDynamicLspTransit Gauge32, vRtrMplsGeneralDynamicLspTerminate Gauge32, vRtrMplsGeneralDetourLspOriginate Gauge32, vRtrMplsGeneralDetourLspTransit Gauge32, vRtrMplsGeneralDetourLspTerminate Gauge32, vRtrMplsGeneralS2lOriginate Gauge32, vRtrMplsGeneralS2lTransit Gauge32, vRtrMplsGeneralS2lTerminate Gauge32, vRtrMplsGeneralLspEgrStatCount Counter32, vRtrMplsGeneralLspIgrStatCount Counter32, vRtrMplsGenMplsTpLspOriginate Gauge32, vRtrMplsGenMplsTpLspTransit Gauge32, vRtrMplsGenMplsTpLspTerminate Gauge32, vRtrMplsGenMplsTpOrigPathInst Gauge32, vRtrMplsGenMplsTpTranPathInst Gauge32, vRtrMplsGenMplsTpTermPathInst Gauge32, vRtrMplsGeneralMeshP2pOriginate Gauge32, vRtrMplsGeneralOneHopP2pOrigin Gauge32, vRtrMplsGeneralSrTeLspOriginate Gauge32 } vRtrMplsGeneralStaticLspOriginate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralStaticLspOriginate indicates the number of static LSPs that originate at this virtual router." ::= { vRtrMplsGeneralStatEntry 1 } vRtrMplsGeneralStaticLspTransit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralStaticLspTransit indicates the number of static LSPs that transit through this virtual router." ::= { vRtrMplsGeneralStatEntry 2 } vRtrMplsGeneralStaticLspTerminate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralStaticLspTerminate indicates the number of static LSPs that terminate at this virtual router." ::= { vRtrMplsGeneralStatEntry 3 } vRtrMplsGeneralDynamicLspOriginate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralDynamicLspOriginate indicates the number of dynamic LSPs that originate at this virtual router." ::= { vRtrMplsGeneralStatEntry 4 } vRtrMplsGeneralDynamicLspTransit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralDynamicLspTransit indicates the number of dynamic LSPs that transit through this virtual router." ::= { vRtrMplsGeneralStatEntry 5 } vRtrMplsGeneralDynamicLspTerminate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralDynamicLspTerminate indicates the number of dynamic LSPs that terminate at this virtual router." ::= { vRtrMplsGeneralStatEntry 6 } vRtrMplsGeneralDetourLspOriginate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralDetourLspOriginate indicates the number of detour LSPs that originate at this virtual router." ::= { vRtrMplsGeneralStatEntry 7 } vRtrMplsGeneralDetourLspTransit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralDetourLspTransit indicates the number of detour LSPs that transit through this virtual router." ::= { vRtrMplsGeneralStatEntry 8 } vRtrMplsGeneralDetourLspTerminate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralDetourLspTerminate indicates the number of detour LSPs that terminate at this virtual router." ::= { vRtrMplsGeneralStatEntry 9 } vRtrMplsGeneralS2lOriginate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralS2lOriginate indicates the number of source to leaf (S2L) sub LSP path called as S2L here that originate at this virtual router." ::= { vRtrMplsGeneralStatEntry 10 } vRtrMplsGeneralS2lTransit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralS2lTransit indicates the number of S2Ls that transit through this virtual router." ::= { vRtrMplsGeneralStatEntry 11 } vRtrMplsGeneralS2lTerminate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralS2lTerminate indicates the number of S2Ls that terminate at this virtual router." ::= { vRtrMplsGeneralStatEntry 12 } vRtrMplsGeneralLspEgrStatCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralLspEgrStatCount indicates the number of LSP egress statistics configured on this virtual router." ::= { vRtrMplsGeneralStatEntry 13 } vRtrMplsGeneralLspIgrStatCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralLspIgrStatCount indicates the number of LSP ingress statistics configured on this virtual router." ::= { vRtrMplsGeneralStatEntry 14 } vRtrMplsGenMplsTpLspOriginate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenMplsTpLspOriginate indicates the number of MPLS TP LSPs that originate at this virtual router." ::= { vRtrMplsGeneralStatEntry 15 } vRtrMplsGenMplsTpLspTransit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenMplsTpLspTransit indicates the number of MPLS TP LSPs that transit through this virtual router." ::= { vRtrMplsGeneralStatEntry 16 } vRtrMplsGenMplsTpLspTerminate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenMplsTpLspTerminate indicates the number of MPLS TP LSPs that terminate at this virtual router." ::= { vRtrMplsGeneralStatEntry 17 } vRtrMplsGenMplsTpOrigPathInst OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenMplsTpOrigPathInst indicates the number of MPLS TP LSPs originate path instances." ::= { vRtrMplsGeneralStatEntry 18 } vRtrMplsGenMplsTpTranPathInst OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenMplsTpTranPathInst indicates the number of MPLS TP LSPs transit path instances." ::= { vRtrMplsGeneralStatEntry 19 } vRtrMplsGenMplsTpTermPathInst OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGenMplsTpTermPathInst indicates the number of MPLS TP LSPs terminated path instances." ::= { vRtrMplsGeneralStatEntry 20 } vRtrMplsGeneralMeshP2pOriginate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralMeshP2pOriginate indicates the number of Mesh P2P LSPs originating at this virtual router." ::= { vRtrMplsGeneralStatEntry 21 } vRtrMplsGeneralOneHopP2pOrigin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralOneHopP2pOrigin indicates the number of One Hop P2P LSPs originating at this virtual router." ::= { vRtrMplsGeneralStatEntry 22 } vRtrMplsGeneralSrTeLspOriginate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsGeneralSrTeLspOriginate indicates the number of Segment Routing TE LSPs that are originating at this virtual router." ::= { vRtrMplsGeneralStatEntry 23 } -- -- -- -- Virtual Router MPLS Interface Table -- vRtrMplsIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsIfTable has an entry for each router interface configured for MPLS in the system." ::= { tmnxMplsObjs 9 } vRtrMplsIfEntry OBJECT-TYPE SYNTAX VRtrMplsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an interface on this virtual router that participates in the MPLS protocol. A row cannot be created or deleted via SNMP SET requests. A row with default attribute values is created by setting the vRtrIfEntry attribute, vRtrIfMplsStatus, to 'create'. A row is removed if vRtrIfMplsStatus is set to 'delete'. However, an attempt to destroy a row will fail if vRtrMplsIfAdminState has not first been set to 'outOfService'." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrMplsIfTable 1 } VRtrMplsIfEntry ::= SEQUENCE { vRtrMplsIfAdminState TmnxAdminState, vRtrMplsIfOperState TmnxOperState, vRtrMplsIfAdminGroup Unsigned32, vRtrMplsIfTeMetric Unsigned32 } vRtrMplsIfAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for the MPLS protocol running on this MPLS interface." DEFVAL { outOfService } ::= { vRtrMplsIfEntry 1 } vRtrMplsIfOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the current status of the MPLS protocol running on this MPLS interface. When the TIMETRA-VRTR-MIB::vRtrIfPortID object of this interface is set to a loopback port identifier, the operational state is not relevant and an SNMP GET request on this object will return 'unknown'." ::= { vRtrMplsIfEntry 2 } vRtrMplsIfAdminGroup OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsIfAdminGroup is a bit-map that identifies the admin groups to which the interface belongs. If bit 'n' is set, then the interface belongs to the admin group with value 'n'. By default, the interface does not belong to any admin groups." DEFVAL { '00000000'H } ::= { vRtrMplsIfEntry 3 } vRtrMplsIfTeMetric OBJECT-TYPE SYNTAX Unsigned32 (0|1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsIfTeMetric specifies the traffic engineering metric for this interface. The TE metric is exchanged in addition to the IGP metric by the IGPs. Depending on the value configured for vRtrMplsLspCspfTeMetricEnabled, either the TE metric or the native IGP metric is used in CSPF computations of the LSP paths. The maximum value that can be configured is a 24 bit value." DEFVAL { 0 } ::= { vRtrMplsIfEntry 4 } -- -- Virtual Router MPLS Interface Statistics Table -- -- Augmentation of the vRtrMplsIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsIfTable, and the augmenting table, -- vRtrMplsIfStatTable. This in effect extends the vRtrMplsIfTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsIfTable results in -- the same fate for the row in the vRtrMplsIfStatTable. -- vRtrMplsIfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsIfStatTable has an entry for each router interface configured for MPLS in the system." ::= { tmnxMplsObjs 10 } vRtrMplsIfStatEntry OBJECT-TYPE SYNTAX VRtrMplsIfStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for an interface on this virtual router that participates in the MPLS protocol. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrMplsIfEntry } ::= { vRtrMplsIfStatTable 1 } VRtrMplsIfStatEntry ::= SEQUENCE { vRtrMplsIfTxPktCount Counter64, vRtrMplsIfRxPktCount Counter64, vRtrMplsIfTxOctetCount Counter64, vRtrMplsIfRxOctetCount Counter64 } vRtrMplsIfTxPktCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MPLS labeled packets transmitted from this interface." ::= { vRtrMplsIfStatEntry 1 } vRtrMplsIfRxPktCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MPLS labeled packets received on this interface." ::= { vRtrMplsIfStatEntry 2 } vRtrMplsIfTxOctetCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes in MPLS labeled packets transmitted on this interface." ::= { vRtrMplsIfStatEntry 3 } vRtrMplsIfRxOctetCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes in MPLS labeled packets received on this interface." ::= { vRtrMplsIfStatEntry 4 } -- -- Virtual Router MPLS Tunnel AR Hop Table -- -- Augmentation of the mplsTunnelARHopEntry. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, mplsTunnelARHopEntry, and the augmenting table, -- vRtrMplsTunnelARHopTable. This in effect extends the mplsTunnelARHopEntry -- with additional columns. -- Creation (or deletion) of a row in the mplsTunnelARHopEntry results in -- the same fate for the row in the vRtrMplsTunnelARHopTable. -- vRtrMplsTunnelARHopTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTunnelARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTunnelARHopTable augments the mplsTunnelARHopEntry in the MPLS-TE-MIB." ::= { tmnxMplsObjs 11 } vRtrMplsTunnelARHopEntry OBJECT-TYPE SYNTAX VRtrMplsTunnelARHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry in this table corresponds to a row entry in the mplsTunnelARHopTable and adds to the information contained in that table" AUGMENTS { mplsTunnelARHopEntry } ::= { vRtrMplsTunnelARHopTable 1 } VRtrMplsTunnelARHopEntry ::= SEQUENCE { vRtrMplsTunnelARHopProtection BITS, vRtrMplsTunnelARHopRecordLabel MplsLabel, vRtrMplsTunnelARHopRouterId IpAddress, vRtrMplsTunnelARHopUnnumIfID Unsigned32 } vRtrMplsTunnelARHopProtection OBJECT-TYPE SYNTAX BITS { localAvailable (0), localInUse (1), bandwidthProtected (2), nodeProtected (3), preemptionPending (4), nodeId (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "If the 'localAvailable' bit is set, it indicates that the link downstream of this node has been protected by means of a local repair mechanism. This mechanism can be either the one-to-one backup method or the facility backup method. If the 'localInUse' bit is set, then it indicates that the local protection mechanism is being used to maintain this tunnel. If the 'bandwidthProtected' bit is set, then it indicates that the backup path is guaranteed to provide the desired bandwidth. If the 'nodeProtected' bit is set, then it indicates that the backup path provides protection against the failure of the next LSR along the LSP. If the 'nodeId' bit is set, it indicates that the address specified in the Record Route Object's IPv4 or IPv6 sub-object is a node-id address." ::= { vRtrMplsTunnelARHopEntry 1 } vRtrMplsTunnelARHopRecordLabel OBJECT-TYPE SYNTAX MplsLabel MAX-ACCESS read-only STATUS current DESCRIPTION "If label recording is enabled, vRtrMplsTunnelARHopRecordLabel specifies the label that is advertised to the previous hop in the hop list. If label recording is disabled, vRtrMplsTunnelARHopRecordLabel will have a value of 4294967295" ::= { vRtrMplsTunnelARHopEntry 2 } vRtrMplsTunnelARHopRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrMplsTunnelARHopRouterId indicates the router ID of the node corresponding to this hop." ::= { vRtrMplsTunnelARHopEntry 3 } vRtrMplsTunnelARHopUnnumIfID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTunnelARHopUnnumIfID indicates the unnumbered interface identifier of this hop. This object should be used in conjunction with vRtrMplsTunnelARHopRouterId which would contain the LSR Router ID for the unnumbered interface. If mplsTunnelARHopAddrType is set to unnum(100), then this entry is valid." ::= { vRtrMplsTunnelARHopEntry 4 } -- -- Virtual Router MPLS CSPF Tunnel Hop Table -- vRtrMplsTunnelCHopTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTunnelCHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTunnelCHopTable is used to hold the CSPF path for a detour LSP. Each entry indicates a single hop. Primary index is the vRtrMplsTunnelCHopListIndex which associates multiple entries (hops) in the vRtrMplsTunnelCHopTable to a single mplsTunnelEntry specified in the mplsTunnelTable. The first row in the table is the first hop after the origination point of the tunnel." ::= { tmnxMplsObjs 12 } vRtrMplsTunnelCHopEntry OBJECT-TYPE SYNTAX VRtrMplsTunnelCHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents a CSPF tunnel hop. Entries are created and deleted by the system." INDEX { vRtrMplsTunnelCHopListIndex, vRtrMplsTunnelCHopIndex } ::= { vRtrMplsTunnelCHopTable 1 } VRtrMplsTunnelCHopEntry ::= SEQUENCE { vRtrMplsTunnelCHopListIndex Integer32, vRtrMplsTunnelCHopIndex Integer32, vRtrMplsTunnelCHopAddrType INTEGER, vRtrMplsTunnelCHopIpv4Addr IpAddress, vRtrMplsTunnelCHopIpv4PrefixLen INTEGER, vRtrMplsTunnelCHopIpv6Addr InetAddressIPv6, vRtrMplsTunnelCHopIpv6PrefixLen INTEGER, vRtrMplsTunnelCHopAsNumber INTEGER, vRtrMplsTunnelCHopLspId MplsLSPID, vRtrMplsTunnelCHopStrictOrLoose INTEGER, vRtrMplsTunnelCHopEgressAdmGrp Unsigned32, vRtrMplsTunnelCHopUnnumIfID Unsigned32, vRtrMplsTunnelCHopRtrID IpAddress, vRtrMplsTunnelCHopIsABR TruthValue } vRtrMplsTunnelCHopListIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Primary index into this table identifying a particular explicit route object." ::= { vRtrMplsTunnelCHopEntry 1 } vRtrMplsTunnelCHopIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Secondary index into this table identifying a particular hop." ::= { vRtrMplsTunnelCHopEntry 2 } vRtrMplsTunnelCHopAddrType OBJECT-TYPE SYNTAX INTEGER { ipV4(1), ipV6(2), asNumber(3), lspid(4), unnum(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTunnelCHopAddrType specifies the address type of this tunnel hop. When the value of vRtrMplsTunnelCHopAddrType is 'ipv4', it specifies an IPv4 address type and vRtrMplsTunnelCHopIpv4Addr should be configured. When the value of vRtrMplsTunnelCHopAddrType is 'ipv6', it specifies an IPv6 address type and vRtrMplsTunnelCHopIpv6Addr should be configured. When the value of vRtrMplsTunnelCHopAddrType is 'asNumber', it specifies an AS number and vRtrMplsTunnelCHopAsNumber should be configured. When the value of vRtrMplsTunnelCHopAddrType is 'lspid', it specifies an LSP ID and vRtrMplsTunnelCHopLspId should be configured. When the value of vRtrMplsTunnelCHopAddrType is 'unnum', it specifies an unnumbered interface identifier and vRtrMplsTunnelCHopUnnumIfID should be configured." DEFVAL { ipV4 } ::= { vRtrMplsTunnelCHopEntry 3 } vRtrMplsTunnelCHopIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "If vRtrMplsTunnelCHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should contain a value of 0." ::= { vRtrMplsTunnelCHopEntry 4 } vRtrMplsTunnelCHopIpv4PrefixLen OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "If vRtrMplsTunnelCHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of 0." ::= { vRtrMplsTunnelCHopEntry 5 } vRtrMplsTunnelCHopIpv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "If the vRtrMplsTunnelCHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should contain a value of 0." ::= { vRtrMplsTunnelCHopEntry 6 } vRtrMplsTunnelCHopIpv6PrefixLen OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "If vRtrMplsTunnelCHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a value of 0." ::= { vRtrMplsTunnelCHopEntry 7 } vRtrMplsTunnelCHopAsNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "If vRtrMplsTunnelCHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { vRtrMplsTunnelCHopEntry 8 } vRtrMplsTunnelCHopLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "If vRtrMplsTunnelCHopAddrType is set to lspid(4), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { vRtrMplsTunnelCHopEntry 9 } vRtrMplsTunnelCHopStrictOrLoose OBJECT-TYPE SYNTAX INTEGER { strict(1), loose(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes whether this tunnel hop is routed in a strict or loose fashion." ::= { vRtrMplsTunnelCHopEntry 10 } vRtrMplsTunnelCHopEgressAdmGrp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTunnelCHopEgressAdmGrp indicates administrative groups on the egressing interface at the current hop." ::= { vRtrMplsTunnelCHopEntry 11 } vRtrMplsTunnelCHopUnnumIfID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTunnelCHopUnnumIfID indicates the unnumbered interface identifier of this hop. This object should be used in conjunction with vRtrMplsTunnelCHopRtrID which would contain the LSR Router ID for the unnumbered interface. If vRtrMplsTunnelCHopAddrType is set to unnum(5), then this entry is valid. This object is otherwise insignificant and should contain a value of 0 to indicate this fact." ::= { vRtrMplsTunnelCHopEntry 12 } vRtrMplsTunnelCHopRtrID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTunnelCHopRtrID indicates value of the Router ID for the node when vRtrMplsTunnelCHopAddrType is set to ipV4(1) or unnum(5)." ::= { vRtrMplsTunnelCHopEntry 13 } vRtrMplsTunnelCHopIsABR OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTunnelCHopIsABR indicates whether the current hop is an Area Border Router (ABR) or not." ::= { vRtrMplsTunnelCHopEntry 14 } -- -- Virtual Router MPLS Administrative Group Table -- vRtrMplsAdminGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsAdminGroupEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vRtrMplsAdminGroupTable has an entry for each administrative group configured for the virtual router in the system. Administrative groups are resource constructs that define a link color or resource class. They provide the ability to classify network resources (links) into groups or colors based on zones, geographic location, link location, etc. By doing so, network administrators are able to do more granular traffic engineering of LSPs." ::= { tmnxMplsObjs 13 } vRtrMplsAdminGroupEntry OBJECT-TYPE SYNTAX VRtrMplsAdminGroupEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry in the vRtrMplsAdminGroupTable represents an administrative group which is simply a mapping between a group name (an ASCII string) and a group value (a number in the range 0 to 31). Entries in this table are created and deleted via SNMP SET operations. An entry is created by setting the value of vRtrMplsAdminGroupRowStatus to 'createAndWait'. The row status for this entry can be set to active only once the value of vRtrMplsAdminGroupValue has been set to a valid number in the range 0 to 31. The entry is destroyed when vRtrMplsAdminGroupRowStatus is set to 'destroy'." INDEX { vRtrID, IMPLIED vRtrMplsAdminGroupName } ::= { vRtrMplsAdminGroupTable 1 } VRtrMplsAdminGroupEntry ::= SEQUENCE { vRtrMplsAdminGroupName TNamedItem, vRtrMplsAdminGroupRowStatus RowStatus, vRtrMplsAdminGroupValue Integer32 } vRtrMplsAdminGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrMplsAdminGroupName uniquely identifies the name of the administrative group within a virtual router instance." ::= { vRtrMplsAdminGroupEntry 1 } vRtrMplsAdminGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrMplsAdminGroupRowStatus is used to create, delete or control entries in the vRtrMplsAdminGroupTable. To create a row entry, the row status should be set to 'createAndWait'. Before the row can be placed into the 'active' state, vRtrMplsAdminGroupValue must be set to a value between 0 and 31. To delete a row entry, the row status should be set to 'destroy'" ::= { vRtrMplsAdminGroupEntry 2 } vRtrMplsAdminGroupValue OBJECT-TYPE SYNTAX Integer32 (-1|0..31) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMplsAdminGroupValue specifies the group value associated with this administrative group. This value is unique within a virtual router instance. A value of -1 indicates that the group value for this entry has not been set." ::= { vRtrMplsAdminGroupEntry 3 } -- -- Virtual Router MPLS Fate Sharing Group Table -- vRtrMplsFSGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsFSGroupEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vRtrMplsFSGroupTable has an entry for each group that is a part of the fate sharing database configured for the virtual router in the system. A fate sharing group is used to define a group of links and nodes in the network that share common risk attributes. To minimize a single point of failure, backup paths can be created that not only avoid the nodes and links of the primary path but also any other nodes and links that share risk with the nodes and links of the primary path." ::= { tmnxMplsObjs 14 } vRtrMplsFSGroupEntry OBJECT-TYPE SYNTAX VRtrMplsFSGroupEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry in the vRtrMplsFSGroupTable represents a fate sharing group which is a database of nodes and links that share common risk attributes. Entries in this table are created and deleted via SNMP SET operations. An entry is created by setting the value of vRtrMplsFSGroupRowStatus to 'createAndGo'. An entry can be deleted by setting vRtrMplsFSGroupRowStatus to 'destroy'." INDEX { vRtrID, vRtrMplsFSGroupName } ::= { vRtrMplsFSGroupTable 1 } VRtrMplsFSGroupEntry ::= SEQUENCE { vRtrMplsFSGroupName TNamedItem, vRtrMplsFSGroupRowStatus RowStatus, vRtrMplsFSGroupCost Unsigned32 } vRtrMplsFSGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrMplsFSGroupName uniquely identifies the name of the fate sharing group within a virtual router instance." ::= { vRtrMplsFSGroupEntry 1 } vRtrMplsFSGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrMplsFSGroupRowStatus is used to create, delete or control entries in the vRtrMplsFSGroupTable. To create a row entry, the row status should be set to 'createAndGo'. To delete a row entry, the row status should be set to 'destroy'" ::= { vRtrMplsFSGroupEntry 2 } vRtrMplsFSGroupCost OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMplsFSGroupCost specifies the cost assigned to the fate sharing group. This cost is applied to all nodes and links that are part of this group and used for CSPF calculations. The higher the cost of the node or link, the lesser its chance of being selected as part of the path." DEFVAL { 1 } ::= { vRtrMplsFSGroupEntry 3 } -- -- Virtual Router MPLS Fate Sharing Group Params Table -- vRtrMplsFSGroupParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsFSGroupParamsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vRtrMplsFSGroupParamsTable has an entry for each node or link that is part of a fate sharing group on this virtual router." ::= { tmnxMplsObjs 15 } vRtrMplsFSGroupParamsEntry OBJECT-TYPE SYNTAX VRtrMplsFSGroupParamsEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry in the vRtrMplsFSGroupParamsTable represents either a node or a link that is a part of a fate sharing group defined in the vRtrMplsFSGroupTable. Entries in this table are created and deleted via SNMP SET operations. An entry is created by setting the value of vRtrMplsFSGroupParamsRowStatus to 'createAndGo'. An entry can be deleted by setting vRtrMplsFSGroupParamsRowStatus to 'destroy'. To configure a node to be part of the group, create an entry in this table with vRtrMplsFSGroupParamsFromAddr set to a valid non-zero IP address and vRtrMplsFSGroupParamsToAddr set to 0. To configure a link to be part of the group, create an entry in this table with both vRtrMplsFSGroupParamsFromAddr and vRtrMplsFSGroupParamsToAddr set to valid non-zero IP addresses." INDEX { vRtrID, vRtrMplsFSGroupName, vRtrMplsFSGroupParamsFromAddr, vRtrMplsFSGroupParamsToAddr } ::= { vRtrMplsFSGroupParamsTable 1 } VRtrMplsFSGroupParamsEntry ::= SEQUENCE { vRtrMplsFSGroupParamsFromAddr IpAddress, vRtrMplsFSGroupParamsToAddr IpAddress, vRtrMplsFSGroupParamsRowStatus RowStatus } vRtrMplsFSGroupParamsFromAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrMplsFSGroupParamsFromAddr along with the value of vRtrMplsFSGroupParamsToAddr uniquely identifies a link or node within a fate sharing group. This value must be non-zero for all row entries whether it represents a node or a link." ::= { vRtrMplsFSGroupParamsEntry 1 } vRtrMplsFSGroupParamsToAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrMplsFSGroupParamsToAddr along with the value of vRtrMplsFSGroupParamsFromAddr uniquely identifies a link or node within a fate sharing group. This value must be 0 for row entries that represent a node and must be non-zero for row entries that represent a link." ::= { vRtrMplsFSGroupParamsEntry 2 } vRtrMplsFSGroupParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrMplsFSGroupParamsRowStatus is used to create, delete or control entries in the vRtrMplsFSGroupParamsTable. To create a row entry, the row status should be set to 'createAndGo'. To delete a row entry, the row status should be set to 'destroy'" ::= { vRtrMplsFSGroupParamsEntry 3 } -- -- MPLS Label Range Table -- vRtrMplsLabelRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLabelRangeTable has an entry for each type of label, the minimum and maximum value in the label range and information on total available and aging labels in each range. This is a read-only table." ::= { tmnxMplsObjs 17 } vRtrMplsLabelRangeEntry OBJECT-TYPE SYNTAX VRtrMplsLabelRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrMplsLabelRangeTable represents a type of label. Each entry contains the label range used by that label type and the number of aging and allocated labels in the range." INDEX { vRtrMplsLabelType } ::= { vRtrMplsLabelRangeTable 1 } VRtrMplsLabelRangeEntry ::= SEQUENCE { vRtrMplsLabelType INTEGER, vRtrMplsLabelRangeMin Unsigned32, vRtrMplsLabelRangeMax Unsigned32, vRtrMplsLabelRangeAging Unsigned32, vRtrMplsLabelRangeAvailable Unsigned32 } vRtrMplsLabelType OBJECT-TYPE SYNTAX INTEGER { staticLsp (1), staticSvc (2), dynamic (3), segmentRoute (4), static (5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLabelType specifies the type of label and is the index for this table." ::= { vRtrMplsLabelRangeEntry 1 } vRtrMplsLabelRangeMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLabelRangeMin indicates the minimum label value in the range for a particular label type." ::= { vRtrMplsLabelRangeEntry 2 } vRtrMplsLabelRangeMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLabelRangeMax indicates the maximum label value in the range for a particular label type." ::= { vRtrMplsLabelRangeEntry 3 } vRtrMplsLabelRangeAging OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLabelRangeAging represents the number of labels that are currently allocated and aging." ::= { vRtrMplsLabelRangeEntry 4 } vRtrMplsLabelRangeAvailable OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLabelRangeAvailable represents the number of labels that are currently available for each label type." ::= { vRtrMplsLabelRangeEntry 5 } -- -- MPLS Static LSP Label Table -- vRtrMplsStaticLSPLabelTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsStaticLSPLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsStaticLSPLabelTable has an entry for each allocated label that is part of the static LSP label range. This is a read-only table." ::= { tmnxMplsObjs 18 } vRtrMplsStaticLSPLabelEntry OBJECT-TYPE SYNTAX VRtrMplsStaticLSPLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrMplsStaticLSPLabelTable represents a label of type static LSP that is currently allocated. The entry includes information about the current owner for that label." INDEX { vRtrMplsStaticLSPLabel } ::= { vRtrMplsStaticLSPLabelTable 1 } VRtrMplsStaticLSPLabelEntry ::= SEQUENCE { vRtrMplsStaticLSPLabel MplsLabel, vRtrMplsStaticLSPLabelOwner TmnxMplsLabelOwner } vRtrMplsStaticLSPLabel OBJECT-TYPE SYNTAX MplsLabel (32..262112) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsStaticLSPLabel specifies the label value for a static LSP. The range of vRtrMplsStaticLSPLabel is dynamic and depends on the value of vRtrMplsLabelStaticLabelRange. The normal range of vRtrMplsStaticLSPLabel starts at 32 and ends at the value of vRtrMplsLabelStaticLabelRange + 32." ::= { vRtrMplsStaticLSPLabelEntry 1 } vRtrMplsStaticLSPLabelOwner OBJECT-TYPE SYNTAX TmnxMplsLabelOwner MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsStaticLSPLabelOwner indicates the owner for the label value vRtrMplsStaticLSPLabel." ::= { vRtrMplsStaticLSPLabelEntry 2 } -- -- MPLS Static Service Label Table -- vRtrMplsStaticSvcLabelTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsStaticSvcLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsStaticSvcLabelTable has an entry for each allocated label that is part of the static service label range. This is a read-only table." ::= { tmnxMplsObjs 19 } vRtrMplsStaticSvcLabelEntry OBJECT-TYPE SYNTAX VRtrMplsStaticSvcLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrMplsStaticSvcLabelTable represents a label of type static-svc that is currently allocated. The entry includes information about the current owner for that label." INDEX { vRtrMplsStaticSvcLabel } ::= { vRtrMplsStaticSvcLabelTable 1 } VRtrMplsStaticSvcLabelEntry ::= SEQUENCE { vRtrMplsStaticSvcLabel MplsLabel, vRtrMplsStaticSvcLabelOwner TmnxMplsLabelOwner } vRtrMplsStaticSvcLabel OBJECT-TYPE SYNTAX MplsLabel (32..262112) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsStaticSvcLabel specifies the label value for a static SVC. The range of vRtrMplsStaticSvcLabel is dynamic and depends on the value of vRtrMplsLabelStaticLabelRange. The range for vRtrMplsStaticSvcLabel starts at 32 and ends at 32 + vRtrMplsLabelStaticLabelRange." ::= { vRtrMplsStaticSvcLabelEntry 1 } vRtrMplsStaticSvcLabelOwner OBJECT-TYPE SYNTAX TmnxMplsLabelOwner MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsStaticSvcLabelOwner specifies the owner for the label value vRtrMplsStaticSvcLabel." DEFVAL { none } ::= { vRtrMplsStaticSvcLabelEntry 2 } -- -- Virtual Router MPLS SRLG group Table -- vRtrMplsSrlgGrpTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrMplsSrlgGrpTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsSrlgGrpTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 20 } vRtrMplsSrlgGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsSrlgGrpEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vRtrMplsSrlgGrpTable has an entry for each Shared Risk Link Groups (SRLG) group configured for MPLS in the system." ::= { tmnxMplsObjs 21 } vRtrMplsSrlgGrpEntry OBJECT-TYPE SYNTAX VRtrMplsSrlgGrpEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry represents a SRLG group on this virtual router that participates in the MPLS protocol. A row can be created or deleted via SNMP SET requests." INDEX { vRtrID, IMPLIED vRtrMplsSrlgGrpName } ::= { vRtrMplsSrlgGrpTable 1 } VRtrMplsSrlgGrpEntry ::= SEQUENCE { vRtrMplsSrlgGrpName TNamedItem, vRtrMplsSrlgGrpRowStatus RowStatus, vRtrMplsSrlgGrpLastChanged TimeStamp, vRtrMplsSrlgGrpValue Unsigned32 } vRtrMplsSrlgGrpName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrMplsSrlgGrpName indicates the SRLG group name." ::= { vRtrMplsSrlgGrpEntry 1 } vRtrMplsSrlgGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrMplsSrlgGrpRowStatus is used to create, delete or control entries in the vRtrMplsSrlgGrpTable. A value must also be set for vRtrMplsSrlgGrpValue before the row entry can transition to the 'active' state." ::= { vRtrMplsSrlgGrpEntry 2 } vRtrMplsSrlgGrpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrMplsSrlgGrpLastChanged indicates the timestamp of last change to this row in vRtrMplsSrlgGrpTable." ::= { vRtrMplsSrlgGrpEntry 3 } vRtrMplsSrlgGrpValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMplsSrlgGrpValue specifies the group value associated with vRtrMplsSrlgGrpName. This value is unique within a virtual router instance. At the time of row creation, a value for vRtrMplsSrlgGrpValue must be specified or else row creation would fail." ::= { vRtrMplsSrlgGrpEntry 4 } -- -- Virtual Router MPLS Interface SRLG Group Table -- vRtrMplsIfSrlgGrpTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsIfSrlgGrpTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsIfSrlgGrpTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 22 } vRtrMplsIfSrlgGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsIfSrlgGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsIfSrlgGrpTable has an entry for each Shared Risk Link Group (SRLG) groups associated with a router interface configured for MPLS in the system." ::= { tmnxMplsObjs 23 } vRtrMplsIfSrlgGrpEntry OBJECT-TYPE SYNTAX VRtrMplsIfSrlgGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an SRLG group associated with a interface on this virtual router that participates in the MPLS protocol. A row can be created or deleted via SNMP SET requests." INDEX { vRtrID, vRtrIfIndex, IMPLIED vRtrMplsIfSrlgGrpName } ::= { vRtrMplsIfSrlgGrpTable 1 } VRtrMplsIfSrlgGrpEntry ::= SEQUENCE { vRtrMplsIfSrlgGrpName TNamedItem, vRtrMplsIfSrlgGrpRowStatus RowStatus, vRtrMplsIfSrlgGrpLastChanged TimeStamp } vRtrMplsIfSrlgGrpName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsIfSrlgGrpName indicates the SRLG group name." ::= { vRtrMplsIfSrlgGrpEntry 1 } vRtrMplsIfSrlgGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrMplsIfSrlgGrpRowStatus is used to create, delete or control entries in the vRtrMplsIfSrlgGrpTable." ::= { vRtrMplsIfSrlgGrpEntry 2 } vRtrMplsIfSrlgGrpLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsIfSrlgGrpLastChanged indicates the timestamp of last change to this row in vRtrMplsIfSrlgGrpTable." ::= { vRtrMplsIfSrlgGrpEntry 3 } -- -- P2MP Instance Table -- vRtrMplsP2mpInstTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsP2mpInstTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 24 } vRtrMplsP2mpInstTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsP2mpInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsP2mpInstTable contains configuration information for the Mpls Point to Multipoint (P2MP) Instance on a virtual router." ::= { tmnxMplsObjs 25 } vRtrMplsP2mpInstEntry OBJECT-TYPE SYNTAX VRtrMplsP2mpInstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsP2mpInstEntry is an entry (conceptual row) in the vRtrMplsP2mpInstTable. Each entry represents the configuration for a Mpls Point to Multipoint (P2MP) Instance. Entries in this table can be created and deleted via SNMP SET operations. " INDEX { vRtrID, vRtrMplsLspIndex, vRtrMplsP2mpInstIndex } ::= { vRtrMplsP2mpInstTable 1 } VRtrMplsP2mpInstEntry ::= SEQUENCE { vRtrMplsP2mpInstIndex TmnxVRtrMplsLspID, vRtrMplsP2mpInstRowStatus RowStatus, vRtrMplsP2mpInstLastChange TimeStamp, vRtrMplsP2mpInstName TNamedItemOrEmpty, vRtrMplsP2mpInstType INTEGER, vRtrMplsP2mpInstProperties BITS, vRtrMplsP2mpInstBandwidth Unsigned32, vRtrMplsP2mpInstState INTEGER, vRtrMplsP2mpInstSetupPriority Unsigned32, vRtrMplsP2mpInstHoldPriority Unsigned32, vRtrMplsP2mpInstRecord TruthValue, vRtrMplsP2mpInstHopLimit Unsigned32, vRtrMplsP2mpInstAdminState TmnxAdminState, vRtrMplsP2mpInstOperState TmnxOperState, vRtrMplsP2mpInstInheritance Unsigned32, vRtrMplsP2mpInstLspId MplsLSPID, vRtrMplsP2mpInstNegotiatedMTU Unsigned32, vRtrMplsP2mpInstFailCode TmnxMplsLspFailCode, vRtrMplsP2mpInstFailNodeArType InetAddressType, vRtrMplsP2mpInstFailNodeAddr InetAddress, vRtrMplsP2mpInstAdminGrpInclude Unsigned32, vRtrMplsP2mpInstAdminGrpExclude Unsigned32, vRtrMplsP2mpInstAdaptive TruthValue, vRtrMplsP2mpInstOperBandwidth Integer32, vRtrMplsP2mpInstResignal TmnxActionType, vRtrMplsP2mpInstOperMTU Unsigned32, vRtrMplsP2mpInstRecordLabel INTEGER, vRtrMplsP2mpInstLastResigAttpt TimeStamp, vRtrMplsP2mpInstMetric Unsigned32, vRtrMplsP2mpInstLastMBBType TmnxMplsMBBType, vRtrMplsP2mpInstLastMBBEnd TimeStamp, vRtrMplsP2mpInstLastMBBMetric Unsigned32, vRtrMplsP2mpInstLastMBBState INTEGER, vRtrMplsP2mpInstMBBTypeInProg TmnxMplsMBBType, vRtrMplsP2mpInstMBBStarted TimeStamp, vRtrMplsP2mpInstMBBNextRetry Unsigned32, vRtrMplsP2mpInstMBBRetryAttpts Unsigned32, vRtrMplsP2mpInstMBBFailCode TmnxMplsLspFailCode, vRtrMplsP2mpInstMBBFailNodeType InetAddressType, vRtrMplsP2mpInstMBBFailNodeAddr InetAddress } vRtrMplsP2mpInstIndex OBJECT-TYPE SYNTAX TmnxVRtrMplsLspID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique value which identifies this Point to Multipoint Labeled Switch Path (P2MP LSP) for this virtual router in the Nokia SROS system. It is a unique value among entries with the same value of vRtrID." ::= { vRtrMplsP2mpInstEntry 1 } vRtrMplsP2mpInstRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrMplsP2mpInstRowStatus is used to create, delete or control entries in the vRtrMplsP2mpInstTable." ::= { vRtrMplsP2mpInstEntry 2 } vRtrMplsP2mpInstLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstLastChange indicates the timestamp of last change to this row in vRtrMplsP2mpInstTable." ::= { vRtrMplsP2mpInstEntry 3 } vRtrMplsP2mpInstName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstName specifies the administrative name for the P2MP instance which must be unique within a virtual router instance." ::= { vRtrMplsP2mpInstEntry 4 } vRtrMplsP2mpInstType OBJECT-TYPE SYNTAX INTEGER { other (1), primary (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstType specifies the type of P2MP LSP instance." DEFVAL { primary } ::= { vRtrMplsP2mpInstEntry 5 } vRtrMplsP2mpInstProperties OBJECT-TYPE SYNTAX BITS { recordRoute (0), adaptive (1), cspf (2), mergeable (3), fastReroute (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstProperties indicates the set of configured properties for this path expressed as a bit map. For example, if the path is an adaptive path, the bit corresponding to bit value 1 is set." ::= { vRtrMplsP2mpInstEntry 6 } vRtrMplsP2mpInstBandwidth OBJECT-TYPE SYNTAX Unsigned32 UNITS "mega-bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstBandwidth specifies the amount of bandwidth in mega-bits per second (Mbps) to be reserved for the P2MP LSP." DEFVAL { 0 } ::= { vRtrMplsP2mpInstEntry 7 } vRtrMplsP2mpInstState OBJECT-TYPE SYNTAX INTEGER { unknown (1), active (2), inactive (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstState indicates the current working state of this path within this P2MP LSP." ::= { vRtrMplsP2mpInstEntry 8 } vRtrMplsP2mpInstSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstSetupPriority indicates the setup priority to use when insufficient bandwidth is available to setup a P2MP LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this P2MP LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the vRtrMplsP2mpInstHopLimit bit in vRtrMplsP2mpInstInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit." ::= { vRtrMplsP2mpInstEntry 9 } vRtrMplsP2mpInstHoldPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstHoldPriority indicates the hold priority to use when insufficient bandwidth is available to setup a P2MP LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this P2MP LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority. When the vRtrMplsP2mpInstHopLimit bit in vRtrMplsP2mpInstInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit." ::= { vRtrMplsP2mpInstEntry 10 } vRtrMplsP2mpInstRecord OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstRecord specifies whether recording of all hops that a P2MP LSP traverses is enabled. When the value of vRtrMplsP2mpInstRecord is 'true', recording of all the hops that a P2MP LSP traverses is enabled. When the value of vRtrMplsP2mpInstRecord is 'false, recording of all the hops that a P2MP LSP traverses is disabled." DEFVAL { true } ::= { vRtrMplsP2mpInstEntry 11 } vRtrMplsP2mpInstHopLimit OBJECT-TYPE SYNTAX Unsigned32 (2..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstHopLimit specifies the maximum number of hops that a P2MP LSP will traverse including the ingress and egress ESRs. A P2MP LSP will not be setup if the hop limit is exceeded. When the vRtrMplsP2mpInstHopLimit bit in vRtrMplsP2mpInstInheritance is cleared (0), the value returned to a GET request is inherited from vRtrMplsLspHopLimit." DEFVAL { 255 } ::= { vRtrMplsP2mpInstEntry 12 } vRtrMplsP2mpInstAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstAdminState specifies desired administrative state for this P2MP LSP." DEFVAL { inService } ::= { vRtrMplsP2mpInstEntry 13 } vRtrMplsP2mpInstOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstOperState indicates the current operational state of this P2MP LSP." ::= { vRtrMplsP2mpInstEntry 14 } vRtrMplsP2mpInstInheritance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstInheritance specifies whether or not each writable object in this row inherits its value from its corresponding object in the vRtrMplsLspTable. This object controls whether to inherit the operational value of that associated object, or use the administrative value configured in this row. Non mask bits will always have value of zero, and any attempt to change the value will be silently discarded. This object is a bit-mask, with the following positions: vRtrMplsP2mpInstHopLimit 0x40 vRtrMplsP2mpInstAdminGrpInclude 0x200 vRtrMplsP2mpInstAdminGrpExclude 0x400 vRtrMplsP2mpInstAdaptive 0x800 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. The corresponding mask bit will be changed to one when SNMP SET is performed on any of the inherited objects (vRtrMplsP2mpInstHopLimit, vRtrMplsP2mpInstAdminGrpInclude, etc). When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsLspTable." DEFVAL { 0 } ::= { vRtrMplsP2mpInstEntry 15 } vRtrMplsP2mpInstLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstLspId indicates the value which identifies the label switched path that is signaled for this entry." ::= { vRtrMplsP2mpInstEntry 16 } vRtrMplsP2mpInstNegotiatedMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstNegotiatedMTU indicates the size for the Maximum transmission unit (MTU) that is negotiated during establishment of this P2MP LSP path." ::= { vRtrMplsP2mpInstEntry 17 } vRtrMplsP2mpInstFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstFailCode indicates the reason code for P2MP LSP Path failure. A value of 0 indicates that no failure has occurred." ::= { vRtrMplsP2mpInstEntry 18 } vRtrMplsP2mpInstFailNodeArType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstFailNodeArType indicates the type of vRtrMplsP2mpInstFailNodeAddr. When no failure has occurred, vRtrMplsP2mpInstFailNodeArType is 0." ::= { vRtrMplsP2mpInstEntry 19 } vRtrMplsP2mpInstFailNodeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstFailNodeAddr indicates the IP address of the node in the P2MP LSP path at which the P2MP LSP path failed." ::= { vRtrMplsP2mpInstEntry 20 } vRtrMplsP2mpInstAdminGrpInclude OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstAdminGrpInclude is a bit-map that specifies a list of admin groups that should be included when this P2MP LSP is setup. If bit 'n' is set, then the admin group with value 'n' is included for this P2MP LSP. This implies that each link that this P2MP LSP goes through must be associated with at least one of the admin groups in the include list. By default, all admin groups are in the include list." DEFVAL { '00000000'H } ::= { vRtrMplsP2mpInstEntry 21 } vRtrMplsP2mpInstAdminGrpExclude OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstAdminGrpExclude is a bit-map that specifies a list of admin groups that should be excluded when this P2MP LSP is setup. If bit 'n' is set, then the admin group with value 'n' is excluded for this P2MP LSP. This implies that each link that this P2MP LSP goes through must not be associated with any of the admin groups in the exclude list. By default, no admin groups are in the exclude list." DEFVAL { '00000000'H } ::= { vRtrMplsP2mpInstEntry 22 } vRtrMplsP2mpInstAdaptive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstAdaptive specifies whether make-before-break functionality is enabled. If the value of vRtrMplsP2mpInstAdaptive is set to 'true', it enables make-before-break functionality for the P2MP LSP. When the attributes of an already established P2MP LSP are changed, either through manual configuration or due to a change in network topology, make-before-break functionality ensures that the resources of the existing P2MP LSP will not be released until a new path (with the same P2MP LSP Id) has been established and traffic flowing over the existing path is seamlessly transferred to the new path. If the value of vRtrMplsP2mpInstAdaptive is set to 'false', it disables make-before-break functionality." DEFVAL { true } ::= { vRtrMplsP2mpInstEntry 23 } vRtrMplsP2mpInstOperBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "mega-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstOperBandwidth indicates the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserved for the operational P2MP LSP path. When make-before-break functionality for the P2MP LSP is enabled and if the path bandwidth is changed, the resources allocated to the existing P2MP LSP paths will not be released until a new path with the new bandwidth settings has been established. While a new path is being signaled, the administrative value and the operational values of the path bandwidth may differ. The value of vRtrMplsP2mpInstBandwidth specifies the bandwidth requirements for the new P2MP LSP path trying to be established whereas the value of vRtrMplsP2mpInstOperBandwidth specifies the bandwidth reserved for the existing P2MP LSP path." ::= { vRtrMplsP2mpInstEntry 24 } vRtrMplsP2mpInstResignal OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of vRtrMplsP2mpInstResignal to 'doAction' triggers the re-signaling of the P2MP LSP path. If the P2MP LSP path is operationally down either due to network failure or due to the retry attempts count being exceeded, setting this variable to 'doAction' will initiate the signaling for the path. A make-before-break signaling for the path will be initiated if the P2MP LSP is operationally up but the make-before-break retry attempts count was exceeded. Make-before-break signaling will also be initiated for any P2MP LSP that is operationally up. This may be used to cause a loose-hop P2MP LSP to be optimized. If a re-signal is triggered while a re-signaling is already in progress, the old transient state will be destroyed and a new transaction being triggered. An SNMP GET request on this object should return 'notApplicable'." DEFVAL { notApplicable } ::= { vRtrMplsP2mpInstEntry 25 } vRtrMplsP2mpInstOperMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstOperMTU indicates the size for the Maximum transmission unit (MTU) that is currently in operation for this P2MP LSP Path." ::= { vRtrMplsP2mpInstEntry 26 } vRtrMplsP2mpInstRecordLabel OBJECT-TYPE SYNTAX INTEGER { record (1), noRecord (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstRecordLabel specifies when the value of vRtrMplsP2mpInstRecordLabel is 'record', recording of labels at each node that a P2MP LSP traverses is enabled. When the value of vRtrMplsP2mpInstRecordLabel is 'noRecord', recording of labels at each node that a P2MP LSP traverses is disabled." DEFVAL { record } ::= { vRtrMplsP2mpInstEntry 27 } vRtrMplsP2mpInstLastResigAttpt OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstLastResigAttpt indicates the sysUpTime when the last attempt to resignal this P2MP LSP was made." ::= { vRtrMplsP2mpInstEntry 28 } vRtrMplsP2mpInstMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMetric indicates the cost of the traffic engineered path returned by the IGP." ::= { vRtrMplsP2mpInstEntry 29 } vRtrMplsP2mpInstLastMBBType OBJECT-TYPE SYNTAX TmnxMplsMBBType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstLastMBBType indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted." ::= { vRtrMplsP2mpInstEntry 30 } vRtrMplsP2mpInstLastMBBEnd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstLastMBBEnd indicates the sysUpTime when the last MBB ended." ::= { vRtrMplsP2mpInstEntry 31 } vRtrMplsP2mpInstLastMBBMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstLastMBBMetric indicates the cost of the traffic engineered path for the P2MP LSP path prior to MBB." ::= { vRtrMplsP2mpInstEntry 32 } vRtrMplsP2mpInstLastMBBState OBJECT-TYPE SYNTAX INTEGER { none (1), success (2), fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstLastMBBState indicates whether the last Make-before-break was successful or failed. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful fail (3) - make-before-break failed." ::= { vRtrMplsP2mpInstEntry 33 } vRtrMplsP2mpInstMBBTypeInProg OBJECT-TYPE SYNTAX TmnxMplsMBBType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMBBTypeInProg indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is in progress." ::= { vRtrMplsP2mpInstEntry 34 } vRtrMplsP2mpInstMBBStarted OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMBBStarted indicates the sysUpTime when the in-progress MBB started." ::= { vRtrMplsP2mpInstEntry 35 } vRtrMplsP2mpInstMBBNextRetry OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMBBNextRetry indicates the amount of time remaining in seconds before the next attempt is made to retry the in-progress MBB." ::= { vRtrMplsP2mpInstEntry 36 } vRtrMplsP2mpInstMBBRetryAttpts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMBBRetryAttpts indicates 'n' where nth attempt for the MBB is in progress." ::= { vRtrMplsP2mpInstEntry 37 } vRtrMplsP2mpInstMBBFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMBBFailCode indicates the reason code for in-progress MBB failure. A value of 'none' indicates that no failure has occurred." ::= { vRtrMplsP2mpInstEntry 38 } vRtrMplsP2mpInstMBBFailNodeType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMBBFailNodeType indicates the type of vRtrMplsP2mpInstMBBFailNodeAddr. A value of 'unknown' indicates that no failure has occurred." ::= { vRtrMplsP2mpInstEntry 39 } vRtrMplsP2mpInstMBBFailNodeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstMBBFailNodeAddr indicates the IP address of the node in the P2MP LSP path at which the in-progress MBB failed. A value of 'unknown' for vRtrMplsP2mpInstMBBFailNodeType and empty string for vRtrMplsP2mpInstMBBFailNodeAddr indicates that no failure has occurred." ::= { vRtrMplsP2mpInstEntry 40 } -- -- The Virtual Router MPLS P2MP Labeled Switch Path (LSP) Statistics Table -- -- Augmentation of the vRtrMplsP2mpInstTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsP2mpInstTable, and the augmenting table, -- vRtrMplsP2mpInstStatTable. This in effect extends the vRtrMplsP2mpInstTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsP2mpInstTable results in -- the same fate for the row in the vRtrMplsP2mpInstStatTable. -- vRtrMplsP2mpInstStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsP2mpInstStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsP2mpInstStatTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system." ::= { tmnxMplsObjs 26 } vRtrMplsP2mpInstStatEntry OBJECT-TYPE SYNTAX VRtrMplsP2mpInstStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a P2MP Labeled Switch Path (LSP) configured for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrMplsP2mpInstEntry } ::= { vRtrMplsP2mpInstStatTable 1 } VRtrMplsP2mpInstStatEntry ::= SEQUENCE { vRtrMplsP2mpInstStatS2lChanges Counter32, vRtrMplsP2mpInstStatLastS2lChange TimeInterval, vRtrMplsP2mpInstStatConfiguredS2ls Gauge32, vRtrMplsP2mpInstStatOperationalS2ls Gauge32, vRtrMplsP2mpInstStatLastS2lTimeUp TimeInterval, vRtrMplsP2mpInstStatLastS2lTimeDown TimeInterval, vRtrMplsP2mpInstStatTimeUp TimeInterval, vRtrMplsP2mpInstStatTimeDown TimeInterval, vRtrMplsP2mpInstStatTransitions Counter32, vRtrMplsP2mpInstStatLastTrans TimeInterval } vRtrMplsP2mpInstStatS2lChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatS2lChanges indicates the number of S2l changes this P2MP LSP has had. For every S2l change (S2l down, S2l up, S2l change), a corresponding syslog/trap (if enabled) is generated for it." ::= { vRtrMplsP2mpInstStatEntry 1 } vRtrMplsP2mpInstStatLastS2lChange OBJECT-TYPE SYNTAX TimeInterval UNITS "10-milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatLastS2lChange indicates the time since the last change occurred on this P2MP LSP." ::= { vRtrMplsP2mpInstStatEntry 2 } vRtrMplsP2mpInstStatConfiguredS2ls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatConfiguredS2ls indicates the number of S2ls configured for this P2MP LSP." ::= { vRtrMplsP2mpInstStatEntry 3 } vRtrMplsP2mpInstStatOperationalS2ls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatOperationalS2ls indicates the number of operational S2ls for this P2MP LSP. This includes the S2ls currently active." ::= { vRtrMplsP2mpInstStatEntry 4 } vRtrMplsP2mpInstStatLastS2lTimeUp OBJECT-TYPE SYNTAX TimeInterval UNITS "10-milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatLastS2lTimeUp indicates the total time that this S2l has been operational." ::= { vRtrMplsP2mpInstStatEntry 5 } vRtrMplsP2mpInstStatLastS2lTimeDown OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatLastS2lTimeDown indicates the total time that this S2l has not been operational." ::= { vRtrMplsP2mpInstStatEntry 6 } vRtrMplsP2mpInstStatTimeUp OBJECT-TYPE SYNTAX TimeInterval UNITS "10-milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatTimeUp indicates the total time that this P2MP instance has been operational." ::= { vRtrMplsP2mpInstStatEntry 7 } vRtrMplsP2mpInstStatTimeDown OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatTimeDown indicates the total time that this P2MP instance has not been operational." ::= { vRtrMplsP2mpInstStatEntry 8 } vRtrMplsP2mpInstStatTransitions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The The value of vRtrMplsP2mpInstStatTransitions indicates the number of state transitions (up -> down and down -> up) this P2mp instance has undergone." ::= { vRtrMplsP2mpInstStatEntry 9 } vRtrMplsP2mpInstStatLastTrans OBJECT-TYPE SYNTAX TimeInterval UNITS "ten-milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsP2mpInstStatLastTrans indicates the time since the last transition occurred on this P2mp instance." ::= { vRtrMplsP2mpInstStatEntry 10 } -- -- S2L SUB LSP Table -- vRtrMplsS2lSubLspTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsS2lSubLspTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 27 } vRtrMplsS2lSubLspTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsS2lSubLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsS2lSubLspTable provides an association between an P2MP LSP and a source to leaf (S2L) sub LSP path called as S2L here. A P2MP LSP can have more than one S2L sub LSP association." ::= { tmnxMplsObjs 28 } vRtrMplsS2lSubLspEntry OBJECT-TYPE SYNTAX VRtrMplsS2lSubLspEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an association between a Labeled Switch Path (P2MP LSP) in the vRtrMplsP2mpInstTable and a S2L sub LSP entry in the vRtrMplsS2lSubLspTable. Entries in this table can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires vRtrMplsS2lSubLspType to have been assigned a valid value." INDEX { vRtrID, vRtrMplsLspIndex, vRtrMplsP2mpInstIndex , mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, vRtrMplsS2lSubLspDstAddrType, vRtrMplsS2lSubLspDstAddr } ::= { vRtrMplsS2lSubLspTable 1 } VRtrMplsS2lSubLspEntry ::= SEQUENCE { vRtrMplsS2lSubLspDstAddrType InetAddressType, vRtrMplsS2lSubLspDstAddr InetAddress, vRtrMplsS2lSubLspRowStatus RowStatus, vRtrMplsS2lSubLspLastChange TimeStamp, vRtrMplsS2lSubLspType INTEGER, vRtrMplsS2lSubLspProperties BITS, vRtrMplsS2lSubLspState INTEGER, vRtrMplsS2lSubLspAdminState TmnxAdminState, vRtrMplsS2lSubLspOperState TmnxOperState, vRtrMplsS2lSubGroupId Unsigned32, vRtrMplsS2lSubLspId MplsLSPID, vRtrMplsS2lSubLspRetryTimeRemain Unsigned32, vRtrMplsS2lSubLspTunARHopLtIndex Integer32, vRtrMplsS2lSubLspNegotiatedMTU Unsigned32, vRtrMplsS2lSubLspFailCode TmnxMplsLspFailCode, vRtrMplsS2lSubLspFailNodeArType InetAddressType, vRtrMplsS2lSubLspFailNodeAddr InetAddress, vRtrMplsS2lSubLspOperBandwidth Integer32, vRtrMplsS2lSubLspTunCRHopLtIndex Integer32, vRtrMplsS2lSubLspOperMTU Unsigned32, vRtrMplsS2lSubLspLastResigAttpt TimeStamp, vRtrMplsS2lSubLspLastMBBType TmnxMplsMBBType, vRtrMplsS2lSubLspLastMBBEnd TimeStamp, vRtrMplsS2lSubLspLastMBBMetric Unsigned32, vRtrMplsS2lSubLspLastMBBState INTEGER, vRtrMplsS2lSubLspMBBTypeInProg TmnxMplsMBBType, vRtrMplsS2lSubLspMBBStarted TimeStamp, vRtrMplsS2lSubLspMBBNextRetry Unsigned32, vRtrMplsS2lSubLspMBBRetryAttpts Unsigned32, vRtrMplsS2lSubLspMBBFailCode TmnxMplsLspFailCode, vRtrMplsS2lSubLspMBBFailNodeType InetAddressType, vRtrMplsS2lSubLspMBBFailNodeAddr InetAddress, vRtrMplsS2lSubLspUpTime TimeStamp, vRtrMplsS2lSubLspDownTime TimeStamp, vRtrMplsS2lSubLspIsFastRetry TruthValue, vRtrMplsS2lSubLspTimeoutIn Unsigned32, vRtrMplsS2lSubLspMBBTimeoutIn Unsigned32, vRtrMplsS2lSubLspInterArea TruthValue } vRtrMplsS2lSubLspDstAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspDstAddrType indicates the type of vRtrMplsS2lSubLspDstAddr." ::= { vRtrMplsS2lSubLspEntry 1 } vRtrMplsS2lSubLspDstAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspDstAddr indicates the IP address of the destination address of the S2L sub LSP. " ::= { vRtrMplsS2lSubLspEntry 2 } vRtrMplsS2lSubLspRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspRowStatus specifies row status used for creation, deletion, or control of vRtrMplsLspPathTable entries. Before the row can be placed into the 'active' state vRtrMplsS2lSubLspType must have been assigned a valid value." ::= { vRtrMplsS2lSubLspEntry 3 } vRtrMplsS2lSubLspLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspLastChange indicates the sysUpTime when this row was last modified." ::= { vRtrMplsS2lSubLspEntry 4} vRtrMplsS2lSubLspType OBJECT-TYPE SYNTAX INTEGER { s2lPath (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspType indicates the value that represents the role this S2L sub LSP is taking within this P2MP LSP." ::= { vRtrMplsS2lSubLspEntry 5 } vRtrMplsS2lSubLspProperties OBJECT-TYPE SYNTAX BITS { recordRoute (0), adaptive (1), cspf (2), mergeable (3), fastReroute (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspProperties indicates the set of configured properties. For example, if the S2L sub LSP is an adaptive S2L sub LSP, the bit corresponding to bit value 1 is set." ::= { vRtrMplsS2lSubLspEntry 6 } vRtrMplsS2lSubLspState OBJECT-TYPE SYNTAX INTEGER { unknown (1), active (2), inactive (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspState indicates the current working state of this S2L sub LSP within this LSP." DEFVAL { unknown } ::= { vRtrMplsS2lSubLspEntry 7 } vRtrMplsS2lSubLspAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspAdminState specifies the desired administrative state for this P2MP S2L sub LSP." DEFVAL { inService } ::= { vRtrMplsS2lSubLspEntry 8 } vRtrMplsS2lSubLspOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspOperState indicates the current operational state of this P2MP S2L sub LSP." ::= { vRtrMplsS2lSubLspEntry 9 } vRtrMplsS2lSubGroupId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubGroupId indicates the value which identifies the group for this entry." ::= { vRtrMplsS2lSubLspEntry 10 } vRtrMplsS2lSubLspId OBJECT-TYPE SYNTAX MplsLSPID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspId indicates the value which identifies the label switched path that is signaled for this entry." ::= { vRtrMplsS2lSubLspEntry 11 } vRtrMplsS2lSubLspRetryTimeRemain OBJECT-TYPE SYNTAX Unsigned32 UNITS "10-milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspRetryTimeRemain indicates the time to signal this S2L sub LSP." ::= { vRtrMplsS2lSubLspEntry 12 } vRtrMplsS2lSubLspTunARHopLtIndex OBJECT-TYPE SYNTAX Integer32 (0|1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspTunARHopLtIndex indicates Primary index into the mplsTunnelARHopTable identifying a particular recorded hop list. A value of 0 implies that there is no recorded hop list associated with this P2MP LSP path." ::= { vRtrMplsS2lSubLspEntry 13 } vRtrMplsS2lSubLspNegotiatedMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspNegotiatedMTU indicates the size for the Maximum transmission unit (MTU) that is negotiated during establishment of this P2MP LSP Path." DEFVAL { 0 } ::= { vRtrMplsS2lSubLspEntry 14 } vRtrMplsS2lSubLspFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspFailCode indicates the reason code for P2MP LSP Path failure. A value of 0 indicates that no failure has occurred." ::= { vRtrMplsS2lSubLspEntry 15 } vRtrMplsS2lSubLspFailNodeArType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspFailNodeArType indicates type of vRtrMplsS2lSubLspFailNodeAddr. When no failure has occurred, this value is 0." ::= { vRtrMplsS2lSubLspEntry 16 } vRtrMplsS2lSubLspFailNodeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspFailNodeAddr indicates the IP address of the node in the P2MP S2L sub LSP at which the P2MP S2L sub LSP failed." ::= { vRtrMplsS2lSubLspEntry 17 } vRtrMplsS2lSubLspOperBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "mega-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspOperBandwidth indicates the amount of bandwidth in mega-bits per seconds (Mbps) that has been reserved for the operational P2MP S2L sub LSP. When make-before-break functionality for the P2MP LSP is enabled and if the S2L sub LSP bandwidth is changed, the resources allocated to the existing P2MP LSP paths will not be released until a new S2L sub LSP with the new bandwidth settings has been established. While a new S2L sub LSP is being signaled, the administrative value and the operational values of the S2L sub LSP bandwidth may differ. The value of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth requirements for the new P2MP S2L sub LSP trying to be established whereas the value of vRtrMplsS2lSubLspOperBandwidth specifies the bandwidth reserved for the existing P2MP S2L sub LSP." ::= { vRtrMplsS2lSubLspEntry 18 } vRtrMplsS2lSubLspTunCRHopLtIndex OBJECT-TYPE SYNTAX Integer32 (0|1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspTunCRHopLtIndex indicates primary index into the vRtrMplsTunnelCHopTable identifying a particular computed hop list. A value of 0 implies that there is no computed hop list associated with this LSP path." ::= { vRtrMplsS2lSubLspEntry 19 } vRtrMplsS2lSubLspOperMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspOperMTU indicates the size for the Maximum transmission unit (MTU) that is currently operation for this P2MP LSP Path." ::= { vRtrMplsS2lSubLspEntry 20 } vRtrMplsS2lSubLspLastResigAttpt OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspLastResigAttpt indicates the sysUpTime when the last attempt to resignal this LSP was made." ::= { vRtrMplsS2lSubLspEntry 21 } vRtrMplsS2lSubLspLastMBBType OBJECT-TYPE SYNTAX TmnxMplsMBBType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspLastMBBType indicates the type of last Make-before-break (MBB). If 'none', then no MBB has been attempted." ::= { vRtrMplsS2lSubLspEntry 22 } vRtrMplsS2lSubLspLastMBBEnd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspLastMBBEnd indicates the sysUpTime when the last MBB ended." ::= { vRtrMplsS2lSubLspEntry 23 } vRtrMplsS2lSubLspLastMBBMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspLastMBBMetric indicates the cost of the traffic engineered S2L sub LSP for the S2L sub LSP prior to MBB." ::= { vRtrMplsS2lSubLspEntry 24 } vRtrMplsS2lSubLspLastMBBState OBJECT-TYPE SYNTAX INTEGER { none (1), success (2), fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspLastMBBState indicates whether the last Make-before-break was successful or failed. Possible states are: none (1) - no make-before-break invoked success (2) - make-before-break successful fail (3) - make-before-break failed." ::= { vRtrMplsS2lSubLspEntry 25 } vRtrMplsS2lSubLspMBBTypeInProg OBJECT-TYPE SYNTAX TmnxMplsMBBType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBTypeInProg indicates the type of the Make-before-break (MBB) that is in progress. If 'none', then no MBB is in progress." ::= { vRtrMplsS2lSubLspEntry 26 } vRtrMplsS2lSubLspMBBStarted OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBStarted indicates the sysUpTime when the in-progress MBB started." ::= { vRtrMplsS2lSubLspEntry 27 } vRtrMplsS2lSubLspMBBNextRetry OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBNextRetry indicates the amount of time remaining in seconds before the next attempt is made to retry the in-progress MBB." ::= { vRtrMplsS2lSubLspEntry 28 } vRtrMplsS2lSubLspMBBRetryAttpts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBRetryAttpts indicates 'n' where nth attempt for the MBB is in progress." ::= { vRtrMplsS2lSubLspEntry 29 } vRtrMplsS2lSubLspMBBFailCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBFailCode indicates the reason code for in-progress MBB failure. A value of 'none' indicates that no failure has occurred." ::= { vRtrMplsS2lSubLspEntry 30 } vRtrMplsS2lSubLspMBBFailNodeType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBFailNodeType indicates the type of vRtrMplsS2lSubLspMBBFailNodeAddr. A value of 'unknown' indicates that no failure has occurred." ::= { vRtrMplsS2lSubLspEntry 31 } vRtrMplsS2lSubLspMBBFailNodeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBFailNodeAddr indicates the IP address of the node in the S2L sub LSP at which the in-progress MBB failed. A value of 'unknown' for vRtrMplsS2lSubLspMBBFailNodeType and empty string for vRtrMplsS2lSubLspMBBFailNodeAddr indicates that no failure has occurred." ::= { vRtrMplsS2lSubLspEntry 32 } vRtrMplsS2lSubLspUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspUpTime indicates the timestamp when the S2l came up." ::= { vRtrMplsS2lSubLspEntry 33 } vRtrMplsS2lSubLspDownTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspDownTime indicates the timestamp when the S2l went down." ::= { vRtrMplsS2lSubLspEntry 34 } vRtrMplsS2lSubLspIsFastRetry OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspIsFastRetry indicates which retry timer is being referred to by vRtrMplsS2lSubLspRetryTimeRemain. When the value of vRtrMplsLspPathIsFastRetry is set to 'true', vRtrMplsLspPathRetryTimeRemaining is referring to the P2MP S2L path fast timer, vRtrMplsGenP2mpS2lFastRetry. When the value of vRtrMplsLspPathIsFastRetry is set to 'false', vRtrMplsS2lSubLspRetryTimeRemain is referring to the LSP retry timer, vRtrMplsLspRetryTimer." ::= { vRtrMplsS2lSubLspEntry 35 } vRtrMplsS2lSubLspTimeoutIn OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspTimeoutIn indicates the amount of time remaining, in seconds, for the S2L path state to time out after the initial PATH message has been sent. If the timer expires and the S2L path has not become operationally up, the S2L path is torn down and the retry timer is started to schedule a new retry cycle." ::= { vRtrMplsS2lSubLspEntry 36 } vRtrMplsS2lSubLspMBBTimeoutIn OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspMBBTimeoutIn indicates the amount of time remaining, in seconds, for the in-progress S2L MBB path state to time out after the initial PATH message has been sent. If the timer expires and the in-progress S2L MBB path has not become operationally up, the S2L MBB path is torn down and the retry timer is started to schedule a new retry cycle." ::= { vRtrMplsS2lSubLspEntry 37 } vRtrMplsS2lSubLspInterArea OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspInterArea indicates whether the LSP path is either inter-area or intra-area." ::= { vRtrMplsS2lSubLspEntry 38 } -- -- The Virtual Router MPLS P2MP S2L SUB LSP Statistics Table -- -- Augmentation of the vRtrMplsS2lSubLspTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsS2lSubLspTable, and the augmenting table, -- vRtrMplsS2lSubLspStatTable. This in effect extends the vRtrMplsS2lSubLspTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsS2lSubLspTable results in -- the same fate for the row in the vRtrMplsS2lSubLspStatTable. -- vRtrMplsS2lSubLspStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsS2lSubLspStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsS2lSubLspStatTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system." ::= { tmnxMplsObjs 29 } vRtrMplsS2lSubLspStatEntry OBJECT-TYPE SYNTAX VRtrMplsS2lSubLspStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a P2MP Source to Leaf (S2L) Sub Labeled Switch Path (LSP) configured for a i virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrMplsS2lSubLspEntry } ::= { vRtrMplsS2lSubLspStatTable 1 } VRtrMplsS2lSubLspStatEntry ::= SEQUENCE { vRtrMplsS2lSubLspTimeUp TimeInterval, vRtrMplsS2lSubLspTimeDown TimeInterval, vRtrMplsS2lSubLspRetryAttempts Counter32, vRtrMplsS2lSubLspTransitionCount Counter32, vRtrMplsS2lSubLspCspfQueries Counter32 } vRtrMplsS2lSubLspTimeUp OBJECT-TYPE SYNTAX TimeInterval UNITS "10-milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspTimeUp indicates the total time that this LSP S2l has been operational. For example, the percentage up time can be determined by computing (vRtrMplsS2lSubLspTimeUp/vRtrMplsLspAge * 100 %)." ::= { vRtrMplsS2lSubLspStatEntry 1 } vRtrMplsS2lSubLspTimeDown OBJECT-TYPE SYNTAX TimeInterval UNITS "10-milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspTimeDown indicates the total time that this LSP S2l has not been operational." ::= { vRtrMplsS2lSubLspStatEntry 2 } vRtrMplsS2lSubLspRetryAttempts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspRetryAttempts indicates the number of unsuccessful attempts which have been made to signal this S2l. As soon as the S2l gets signalled, this is set to 0." ::= { vRtrMplsS2lSubLspStatEntry 3 } vRtrMplsS2lSubLspTransitionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspTransitionCount indicates the number of transitions that have occurred for this LSP." ::= { vRtrMplsS2lSubLspStatEntry 4 } vRtrMplsS2lSubLspCspfQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspCspfQueries indicates the number of CSPF queries that have been made for this LSP S2l." ::= { vRtrMplsS2lSubLspStatEntry 5 } -- -- SRLG Database RouterID Table -- vRtrMplsSrlgDBRtrIdTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBRtrIdTblLastChg indicates the sysUpTime at the time of the last modification to vRtrMplsSrlgDBRtrIdTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 30 } vRtrMplsSrlgDBRtrIdTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsSrlgDBRtrIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsSrlgDBRtrIdTable has an entry for each router-id configured under user Shared Risk Link Group (SRLG) database. The user manually enters the SRLG membership information for any link in the network, into the user SRLG database." ::= { tmnxMplsObjs 31 } vRtrMplsSrlgDBRtrIdEntry OBJECT-TYPE SYNTAX VRtrMplsSrlgDBRtrIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a router ID under which interface entries would be configured for the SRLG database table. A row can be created or deleted via SNMP SET requests." INDEX { vRtrID, vRtrMplsSrlgDBRtrIdRouterID } ::= { vRtrMplsSrlgDBRtrIdTable 1 } VRtrMplsSrlgDBRtrIdEntry ::= SEQUENCE { vRtrMplsSrlgDBRtrIdRouterID TmnxMplsRouterId, vRtrMplsSrlgDBRtrIdRowStatus RowStatus, vRtrMplsSrlgDBRtrIdAdminState TmnxAdminState, vRtrMplsSrlgDBRtrIdLastChanged TimeStamp } vRtrMplsSrlgDBRtrIdRouterID OBJECT-TYPE SYNTAX TmnxMplsRouterId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBRtrIdRouterID specifies a 32-bit integer uniquely identifying the router in the Autonomous System. By convention to ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router. The router-id can be either the local one or some remote router." ::= { vRtrMplsSrlgDBRtrIdEntry 1 } vRtrMplsSrlgDBRtrIdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrMplsSrlgDBRtrIdRowStatus is used to create, delete or control entries in the vRtrMplsSrlgDBRtrIdTable." ::= { vRtrMplsSrlgDBRtrIdEntry 2 } vRtrMplsSrlgDBRtrIdAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBRtrIdAdminState specifies the desired administrative state for the router-id entry in the vRtrMplsSrlgDBRtrIdTable." DEFVAL { outOfService } ::= { vRtrMplsSrlgDBRtrIdEntry 3 } vRtrMplsSrlgDBRtrIdLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBRtrIdLastChanged indicates the timestamp of last change to this row in vRtrMplsSrlgDBRtrIdTable." ::= { vRtrMplsSrlgDBRtrIdEntry 4 } -- -- SRLG Database Interface Table -- vRtrMplsSrlgDBIfTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBIfTblLastChanged indicates the sysUpTime at the time of the last modification to vRtrMplsSrlgDBIfTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 32 } vRtrMplsSrlgDBIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsSrlgDBIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsSrlgDBIfTable has an entry for each Shared Risk Link Group (SRLG) groups associated with a interface which is validated as part of a router ID in the routing table. The user manually enters the SRLG membership information for any link in the network, into the user SRLG database." ::= { tmnxMplsObjs 33 } vRtrMplsSrlgDBIfEntry OBJECT-TYPE SYNTAX VRtrMplsSrlgDBIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an SRLG group associated with a interface which is validated as part of a router ID in the routing table. A row can be created or deleted via SNMP SET requests." INDEX { vRtrID, vRtrMplsSrlgDBRtrIdRouterID, vRtrMplsSrlgDBIfIntIpAddrType, vRtrMplsSrlgDBIfIntIpAddr, IMPLIED vRtrMplsSrlgDBIfSrlgGroupName } ::= { vRtrMplsSrlgDBIfTable 1 } VRtrMplsSrlgDBIfEntry ::= SEQUENCE { vRtrMplsSrlgDBIfIntIpAddrType InetAddressType, vRtrMplsSrlgDBIfIntIpAddr InetAddress, vRtrMplsSrlgDBIfSrlgGroupName TNamedItem, vRtrMplsSrlgDBIfRowStatus RowStatus, vRtrMplsSrlgDBIfLastChanged TimeStamp } vRtrMplsSrlgDBIfIntIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBIfIntIpAddrType indicates the type of vRtrMplsSrlgDBIfIntIpAddr." ::= { vRtrMplsSrlgDBIfEntry 1 } vRtrMplsSrlgDBIfIntIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBIfIntIpAddr indicates the IP address of the interface." ::= { vRtrMplsSrlgDBIfEntry 2 } vRtrMplsSrlgDBIfSrlgGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBIfSrlgGroupName indicates the SRLG group name." ::= { vRtrMplsSrlgDBIfEntry 3 } vRtrMplsSrlgDBIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrMplsSrlgDBIfRowStatus is used to create, delete or control entries in the vRtrMplsSrlgDBIfTable." ::= { vRtrMplsSrlgDBIfEntry 4 } vRtrMplsSrlgDBIfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsSrlgDBIfLastChanged indicates the timestamp of last change to this row in vRtrMplsSrlgDBIfTable." ::= { vRtrMplsSrlgDBIfEntry 5 } -- -- Virtual Router MPLS InSegment Table -- -- Augmentation of the mplsInSegmentTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, mplsInSegmentTable, and the augmenting table, -- vRtrMplsInSegmentTable. This in effect extends the mplsInSegmentTable -- with additional columns. -- Creation (or deletion) of a row in the mplsInSegmentTable results in -- the same fate for the row in the vRtrMplsInSegmentTable. -- vRtrMplsInSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsInSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsInSegmentTable augments the mplsInSegmentTable in the MPLS-LSR-MIB." ::= { tmnxMplsObjs 34 } vRtrMplsInSegmentEntry OBJECT-TYPE SYNTAX VRtrMplsInSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry in this table corresponds to a row entry in the mplsInSegmentTable and adds to the information contained in that table." AUGMENTS { mplsInSegmentEntry } ::= { vRtrMplsInSegmentTable 1 } VRtrMplsInSegmentEntry ::= SEQUENCE { vRtrMplsInSegmentNumS2ls Unsigned32 } vRtrMplsInSegmentNumS2ls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInSegmentNumS2ls indicates number of S2Ls on the insegment." ::= { vRtrMplsInSegmentEntry 1 } -- -- Virtual Router MPLS OutSegment Table -- -- Augmentation of the mplsOutSegmentTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, mplsOutSegmentTable, and the augmenting table, -- vRtrMplsOutSegmentTable. This in effect extends the mplsOutSegmentTable -- with additional columns. -- Creation (or deletion) of a row in the mplsOutSegmentTable results in -- the same fate for the row in the vRtrMplsOutSegmentTable. -- vRtrMplsOutSegmentTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsOutSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsOutSegmentTable augments the mplsOutSegmentTable in the MPLS-LSR-MIB." ::= { tmnxMplsObjs 35 } vRtrMplsOutSegmentEntry OBJECT-TYPE SYNTAX VRtrMplsOutSegmentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row entry in this table corresponds to a row entry in the mplsOutSegmentTable and adds to the information contained in that table." AUGMENTS { mplsOutSegmentEntry } ::= { vRtrMplsOutSegmentTable 1 } VRtrMplsOutSegmentEntry ::= SEQUENCE { vRtrMplsOutSegmentNumS2ls Unsigned32 } vRtrMplsOutSegmentNumS2ls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutSegmentNumS2ls indicates number of S2Ls on the outsegment." ::= { vRtrMplsOutSegmentEntry 1 } -- -- The MPLS Label Switched Path (LSP) Egress/Ingress Statistics Table -- vRtrMplsLspStatsTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last change to the vRtrMplsLspStatsTable either from adding a row or removing a row." ::= { tmnxMplsObjs 37 } vRtrMplsLspStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsLspStatsTable controls Statsistics in the ess data-path at the ingress Label Switched Path (LSP) for an Mpls-Lsp FEC." ::= { tmnxMplsObjs 38 } vRtrMplsLspStatsEntry OBJECT-TYPE SYNTAX VRtrMplsLspStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information about the Statistics collection per MPLS LSP." INDEX { vRtrID, vRtrMplsLspStatsType, vRtrMplsLspStatsSenderAddrType, vRtrMplsLspStatsSenderAddr, vRtrMplsLspStatsLspName } ::= { vRtrMplsLspStatsTable 1 } VRtrMplsLspStatsEntry ::= SEQUENCE { vRtrMplsLspStatsType INTEGER, vRtrMplsLspStatsSenderAddrType InetAddressType, vRtrMplsLspStatsSenderAddr InetAddress, vRtrMplsLspStatsLspName TLNamedItem, vRtrMplsLspStatsRowStatus RowStatus, vRtrMplsLspStatsLastChanged TimeStamp, vRtrMplsLspStatsCollectStats TruthValue, vRtrMplsLspStatsAccntingPolicy Unsigned32, vRtrMplsLspStatsAdminState TmnxAdminState } vRtrMplsLspStatsType OBJECT-TYPE SYNTAX INTEGER { egress (0), ingress (1) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspStatsType indicates the type of statistics." ::= { vRtrMplsLspStatsEntry 1 } vRtrMplsLspStatsSenderAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspStatsSenderAddrType indicates address type of vRtrMplsLspStatsSenderAddr." ::= { vRtrMplsLspStatsEntry 2 } vRtrMplsLspStatsSenderAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspStatsSenderAddr indicates the sender address." ::= { vRtrMplsLspStatsEntry 3 } vRtrMplsLspStatsLspName OBJECT-TYPE SYNTAX TLNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspStatsLspName indicates the lsp name. If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p', vRtrMplsLspStatsLspName can have a maximum of 32 characters." ::= { vRtrMplsLspStatsEntry 4 } vRtrMplsLspStatsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrMplsLspStatsRowStatus is used for the creation or deletion of entries in the vRtrMplsLspStatsTable." ::= { vRtrMplsLspStatsEntry 5 } vRtrMplsLspStatsLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspStatsLastChanged indicates the time stamp of the last change to this row of this table." ::= { vRtrMplsLspStatsEntry 6 } vRtrMplsLspStatsCollectStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspStatsCollectStats specifies whether to collect statistics for this prefix." DEFVAL { false } ::= { vRtrMplsLspStatsEntry 7 } vRtrMplsLspStatsAccntingPolicy OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..99) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspStatsAccntingPolicy specifies the accounting policy to be used for this entry. A value of zero indicates that the default accounting policy should be used." DEFVAL { 0 } ::= { vRtrMplsLspStatsEntry 8 } vRtrMplsLspStatsAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspStatsAdminState specifies whether egress statistics are enabled for this lsp." DEFVAL { outOfService } ::= { vRtrMplsLspStatsEntry 9 } -- -- The MPLS Labeled Switch Path (LSP) Statistics Table -- -- Augmentation of the vRtrMplsLspStatsTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsLspStatsTable, and the augmenting table, -- vRtrMplsLspStatisticsTable. This in effect extends the vRtrMplsLspStatsTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsLspStatsTable results in -- the same fate for the row in the vRtrMplsLspStatisticsTable. -- vRtrMplsLspStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspStatisticsTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system." ::= { tmnxMplsObjs 39 } vRtrMplsLspStatisticsEntry OBJECT-TYPE SYNTAX VRtrMplsLspStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrMplsLspStatsEntry } ::= { vRtrMplsLspStatisticsTable 1 } VRtrMplsLspStatisticsEntry ::= SEQUENCE { vRtrMplsInProfilePktsFc0 Counter64, vRtrMplsInProfilePktsFc0Low32 Counter32, vRtrMplsInProfilePktsFc0High32 Counter32, vRtrMplsInProfilePktsFc1 Counter64, vRtrMplsInProfilePktsFc1Low32 Counter32, vRtrMplsInProfilePktsFc1High32 Counter32, vRtrMplsInProfilePktsFc2 Counter64, vRtrMplsInProfilePktsFc2Low32 Counter32, vRtrMplsInProfilePktsFc2High32 Counter32, vRtrMplsInProfilePktsFc3 Counter64, vRtrMplsInProfilePktsFc3Low32 Counter32, vRtrMplsInProfilePktsFc3High32 Counter32, vRtrMplsInProfilePktsFc4 Counter64, vRtrMplsInProfilePktsFc4Low32 Counter32, vRtrMplsInProfilePktsFc4High32 Counter32, vRtrMplsInProfilePktsFc5 Counter64, vRtrMplsInProfilePktsFc5Low32 Counter32, vRtrMplsInProfilePktsFc5High32 Counter32, vRtrMplsInProfilePktsFc6 Counter64, vRtrMplsInProfilePktsFc6Low32 Counter32, vRtrMplsInProfilePktsFc6High32 Counter32, vRtrMplsInProfilePktsFc7 Counter64, vRtrMplsInProfilePktsFc7Low32 Counter32, vRtrMplsInProfilePktsFc7High32 Counter32, vRtrMplsInProfileOctetsFc0 Counter64, vRtrMplsInProfileOctetsFc0Low32 Counter32, vRtrMplsInProfileOctetsFc0High32 Counter32, vRtrMplsInProfileOctetsFc1 Counter64, vRtrMplsInProfileOctetsFc1Low32 Counter32, vRtrMplsInProfileOctetsFc1High32 Counter32, vRtrMplsInProfileOctetsFc2 Counter64, vRtrMplsInProfileOctetsFc2Low32 Counter32, vRtrMplsInProfileOctetsFc2High32 Counter32, vRtrMplsInProfileOctetsFc3 Counter64, vRtrMplsInProfileOctetsFc3Low32 Counter32, vRtrMplsInProfileOctetsFc3High32 Counter32, vRtrMplsInProfileOctetsFc4 Counter64, vRtrMplsInProfileOctetsFc4Low32 Counter32, vRtrMplsInProfileOctetsFc4High32 Counter32, vRtrMplsInProfileOctetsFc5 Counter64, vRtrMplsInProfileOctetsFc5Low32 Counter32, vRtrMplsInProfileOctetsFc5High32 Counter32, vRtrMplsInProfileOctetsFc6 Counter64, vRtrMplsInProfileOctetsFc6Low32 Counter32, vRtrMplsInProfileOctetsFc6High32 Counter32, vRtrMplsInProfileOctetsFc7 Counter64, vRtrMplsInProfileOctetsFc7Low32 Counter32, vRtrMplsInProfileOctetsFc7High32 Counter32, vRtrMplsOutOfProfPktsFc0 Counter64, vRtrMplsOutOfProfPktsFc0Low32 Counter32, vRtrMplsOutOfProfPktsFc0High32 Counter32, vRtrMplsOutOfProfPktsFc1 Counter64, vRtrMplsOutOfProfPktsFc1Low32 Counter32, vRtrMplsOutOfProfPktsFc1High32 Counter32, vRtrMplsOutOfProfPktsFc2 Counter64, vRtrMplsOutOfProfPktsFc2Low32 Counter32, vRtrMplsOutOfProfPktsFc2High32 Counter32, vRtrMplsOutOfProfPktsFc3 Counter64, vRtrMplsOutOfProfPktsFc3Low32 Counter32, vRtrMplsOutOfProfPktsFc3High32 Counter32, vRtrMplsOutOfProfPktsFc4 Counter64, vRtrMplsOutOfProfPktsFc4Low32 Counter32, vRtrMplsOutOfProfPktsFc4High32 Counter32, vRtrMplsOutOfProfPktsFc5 Counter64, vRtrMplsOutOfProfPktsFc5Low32 Counter32, vRtrMplsOutOfProfPktsFc5High32 Counter32, vRtrMplsOutOfProfPktsFc6 Counter64, vRtrMplsOutOfProfPktsFc6Low32 Counter32, vRtrMplsOutOfProfPktsFc6High32 Counter32, vRtrMplsOutOfProfPktsFc7 Counter64, vRtrMplsOutOfProfPktsFc7Low32 Counter32, vRtrMplsOutOfProfPktsFc7High32 Counter32, vRtrMplsOutOfProfOctetsFc0 Counter64, vRtrMplsOutOfProfOctetsFc0Low32 Counter32, vRtrMplsOutOfProfOctetsFc0High32 Counter32, vRtrMplsOutOfProfOctetsFc1 Counter64, vRtrMplsOutOfProfOctetsFc1Low32 Counter32, vRtrMplsOutOfProfOctetsFc1High32 Counter32, vRtrMplsOutOfProfOctetsFc2 Counter64, vRtrMplsOutOfProfOctetsFc2Low32 Counter32, vRtrMplsOutOfProfOctetsFc2High32 Counter32, vRtrMplsOutOfProfOctetsFc3 Counter64, vRtrMplsOutOfProfOctetsFc3Low32 Counter32, vRtrMplsOutOfProfOctetsFc3High32 Counter32, vRtrMplsOutOfProfOctetsFc4 Counter64, vRtrMplsOutOfProfOctetsFc4Low32 Counter32, vRtrMplsOutOfProfOctetsFc4High32 Counter32, vRtrMplsOutOfProfOctetsFc5 Counter64, vRtrMplsOutOfProfOctetsFc5Low32 Counter32, vRtrMplsOutOfProfOctetsFc5High32 Counter32, vRtrMplsOutOfProfOctetsFc6 Counter64, vRtrMplsOutOfProfOctetsFc6Low32 Counter32, vRtrMplsOutOfProfOctetsFc6High32 Counter32, vRtrMplsOutOfProfOctetsFc7 Counter64, vRtrMplsOutOfProfOctetsFc7Low32 Counter32, vRtrMplsOutOfProfOctetsFc7High32 Counter32, vRtrMplsLspStatsPSBMatch TruthValue, vRtrMplsLspStatsTpOnly TruthValue, vRtrMplsLspStatsLspType INTEGER } vRtrMplsInProfilePktsFc0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc0 indicates the number of in profile packets received for Forwarding Class 0." ::= { vRtrMplsLspStatisticsEntry 1 } vRtrMplsInProfilePktsFc0Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc0Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc0." ::= { vRtrMplsLspStatisticsEntry 2 } vRtrMplsInProfilePktsFc0High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc0High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc0." ::= { vRtrMplsLspStatisticsEntry 3 } vRtrMplsInProfilePktsFc1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc1 indicates the number of in profile packets received for Forwarding Class 1." ::= { vRtrMplsLspStatisticsEntry 4 } vRtrMplsInProfilePktsFc1Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc1Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc1." ::= { vRtrMplsLspStatisticsEntry 5 } vRtrMplsInProfilePktsFc1High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc1High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc1." ::= { vRtrMplsLspStatisticsEntry 6 } vRtrMplsInProfilePktsFc2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc2 indicates the number of in profile packets received for Forwarding Class 2." ::= { vRtrMplsLspStatisticsEntry 7 } vRtrMplsInProfilePktsFc2Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc2Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc2." ::= { vRtrMplsLspStatisticsEntry 8 } vRtrMplsInProfilePktsFc2High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc2High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc2." ::= { vRtrMplsLspStatisticsEntry 9 } vRtrMplsInProfilePktsFc3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc3 indicates the number of in profile packets received for Forwarding Class 3." ::= { vRtrMplsLspStatisticsEntry 10 } vRtrMplsInProfilePktsFc3Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc3Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc3." ::= { vRtrMplsLspStatisticsEntry 11 } vRtrMplsInProfilePktsFc3High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc3High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc3." ::= { vRtrMplsLspStatisticsEntry 12 } vRtrMplsInProfilePktsFc4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc4 indicates the number of in profile packets received for Forwarding Class 4." ::= { vRtrMplsLspStatisticsEntry 13 } vRtrMplsInProfilePktsFc4Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc4Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc4." ::= { vRtrMplsLspStatisticsEntry 14 } vRtrMplsInProfilePktsFc4High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc4High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc4." ::= { vRtrMplsLspStatisticsEntry 15 } vRtrMplsInProfilePktsFc5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc5 indicates the number of in profile packets received for Forwarding Class 5." ::= { vRtrMplsLspStatisticsEntry 16 } vRtrMplsInProfilePktsFc5Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc5Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc5." ::= { vRtrMplsLspStatisticsEntry 17 } vRtrMplsInProfilePktsFc5High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc5High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc5." ::= { vRtrMplsLspStatisticsEntry 18 } vRtrMplsInProfilePktsFc6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc6 indicates the number of in profile packets received for Forwarding Class 6." ::= { vRtrMplsLspStatisticsEntry 19 } vRtrMplsInProfilePktsFc6Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc6Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc6." ::= { vRtrMplsLspStatisticsEntry 20 } vRtrMplsInProfilePktsFc6High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc6High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc6." ::= { vRtrMplsLspStatisticsEntry 21 } vRtrMplsInProfilePktsFc7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc7 indicates the number of in profile packets received for Forwarding Class 7." ::= { vRtrMplsLspStatisticsEntry 22 } vRtrMplsInProfilePktsFc7Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc7Low32 indicates the lower 32 bits of the value of vRtrMplsInProfilePktsFc7." ::= { vRtrMplsLspStatisticsEntry 23 } vRtrMplsInProfilePktsFc7High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfilePktsFc7High32 indicates the higher 32 bits of the value of vRtrMplsInProfilePktsFc7." ::= { vRtrMplsLspStatisticsEntry 24 } vRtrMplsInProfileOctetsFc0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc0 indicates the number of in profile octets received for Forwarding Class 0." ::= { vRtrMplsLspStatisticsEntry 25 } vRtrMplsInProfileOctetsFc0Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc0Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc0." ::= { vRtrMplsLspStatisticsEntry 26 } vRtrMplsInProfileOctetsFc0High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc0High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc0." ::= { vRtrMplsLspStatisticsEntry 27 } vRtrMplsInProfileOctetsFc1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc1 indicates the number of in profile octets received for Forwarding Class 1." ::= { vRtrMplsLspStatisticsEntry 28 } vRtrMplsInProfileOctetsFc1Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc1Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc1." ::= { vRtrMplsLspStatisticsEntry 29 } vRtrMplsInProfileOctetsFc1High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc1High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc1." ::= { vRtrMplsLspStatisticsEntry 30 } vRtrMplsInProfileOctetsFc2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc2 indicates the number of in profile octets received for Forwarding Class 2." ::= { vRtrMplsLspStatisticsEntry 31 } vRtrMplsInProfileOctetsFc2Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc2Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc2." ::= { vRtrMplsLspStatisticsEntry 32 } vRtrMplsInProfileOctetsFc2High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc2High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc2." ::= { vRtrMplsLspStatisticsEntry 33 } vRtrMplsInProfileOctetsFc3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc3 indicates the number of in profile octets received for Forwarding Class 3." ::= { vRtrMplsLspStatisticsEntry 34 } vRtrMplsInProfileOctetsFc3Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc3Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc3." ::= { vRtrMplsLspStatisticsEntry 35 } vRtrMplsInProfileOctetsFc3High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc3High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc3." ::= { vRtrMplsLspStatisticsEntry 36 } vRtrMplsInProfileOctetsFc4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc4 indicates the number of in profile octets received for Forwarding Class 4." ::= { vRtrMplsLspStatisticsEntry 37 } vRtrMplsInProfileOctetsFc4Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc4Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc4." ::= { vRtrMplsLspStatisticsEntry 38 } vRtrMplsInProfileOctetsFc4High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc4High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc4." ::= { vRtrMplsLspStatisticsEntry 39 } vRtrMplsInProfileOctetsFc5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc5 indicates the number of in profile octets received for Forwarding Class 5." ::= { vRtrMplsLspStatisticsEntry 40 } vRtrMplsInProfileOctetsFc5Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc5Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc5." ::= { vRtrMplsLspStatisticsEntry 41 } vRtrMplsInProfileOctetsFc5High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc5High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc5." ::= { vRtrMplsLspStatisticsEntry 42 } vRtrMplsInProfileOctetsFc6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc6 indicates the number of in profile octets received for Forwarding Class 6." ::= { vRtrMplsLspStatisticsEntry 43 } vRtrMplsInProfileOctetsFc6Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc6Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc6." ::= { vRtrMplsLspStatisticsEntry 44 } vRtrMplsInProfileOctetsFc6High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc6High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc6." ::= { vRtrMplsLspStatisticsEntry 45 } vRtrMplsInProfileOctetsFc7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc7 indicates the number of in profile octets received for Forwarding Class 7." ::= { vRtrMplsLspStatisticsEntry 46 } vRtrMplsInProfileOctetsFc7Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc7Low32 indicates the lower 32 bits of the value of vRtrMplsInProfileOctetsFc7." ::= { vRtrMplsLspStatisticsEntry 47 } vRtrMplsInProfileOctetsFc7High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsInProfileOctetsFc7High32 indicates the higher 32 bits of the value of vRtrMplsInProfileOctetsFc7." ::= { vRtrMplsLspStatisticsEntry 48 } vRtrMplsOutOfProfPktsFc0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc0 indicates the number of out of profile packets received for Forwarding Class 0." ::= { vRtrMplsLspStatisticsEntry 49 } vRtrMplsOutOfProfPktsFc0Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc0Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc0." ::= { vRtrMplsLspStatisticsEntry 50 } vRtrMplsOutOfProfPktsFc0High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc0High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc0." ::= { vRtrMplsLspStatisticsEntry 51 } vRtrMplsOutOfProfPktsFc1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc1 indicates the number of out of profile packets received for Forwarding Class 1." ::= { vRtrMplsLspStatisticsEntry 52 } vRtrMplsOutOfProfPktsFc1Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc1Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc1." ::= { vRtrMplsLspStatisticsEntry 53 } vRtrMplsOutOfProfPktsFc1High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc1High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc1." ::= { vRtrMplsLspStatisticsEntry 54 } vRtrMplsOutOfProfPktsFc2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc2 indicates the number of out of profile packets received for Forwarding Class 2." ::= { vRtrMplsLspStatisticsEntry 55 } vRtrMplsOutOfProfPktsFc2Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc2Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc2." ::= { vRtrMplsLspStatisticsEntry 56 } vRtrMplsOutOfProfPktsFc2High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc2High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc2." ::= { vRtrMplsLspStatisticsEntry 57 } vRtrMplsOutOfProfPktsFc3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc3 indicates the number of out of profile packets received for Forwarding Class 3." ::= { vRtrMplsLspStatisticsEntry 58 } vRtrMplsOutOfProfPktsFc3Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc3Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc3." ::= { vRtrMplsLspStatisticsEntry 59 } vRtrMplsOutOfProfPktsFc3High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc3High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc3." ::= { vRtrMplsLspStatisticsEntry 60 } vRtrMplsOutOfProfPktsFc4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc4 indicates the number of out of profile packets received for Forwarding Class 4." ::= { vRtrMplsLspStatisticsEntry 61 } vRtrMplsOutOfProfPktsFc4Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc4Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc4." ::= { vRtrMplsLspStatisticsEntry 62 } vRtrMplsOutOfProfPktsFc4High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc4High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc4." ::= { vRtrMplsLspStatisticsEntry 63 } vRtrMplsOutOfProfPktsFc5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc5 indicates the number of out of profile packets received for Forwarding Class 5." ::= { vRtrMplsLspStatisticsEntry 64 } vRtrMplsOutOfProfPktsFc5Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc5Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc5." ::= { vRtrMplsLspStatisticsEntry 65 } vRtrMplsOutOfProfPktsFc5High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc5High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc5." ::= { vRtrMplsLspStatisticsEntry 66 } vRtrMplsOutOfProfPktsFc6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc6 indicates the number of out of profile packets received for Forwarding Class 6." ::= { vRtrMplsLspStatisticsEntry 67 } vRtrMplsOutOfProfPktsFc6Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc6Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc6." ::= { vRtrMplsLspStatisticsEntry 68 } vRtrMplsOutOfProfPktsFc6High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc6High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc6." ::= { vRtrMplsLspStatisticsEntry 69 } vRtrMplsOutOfProfPktsFc7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc7 indicates the number of out of profile packets received for Forwarding Class 7." ::= { vRtrMplsLspStatisticsEntry 70 } vRtrMplsOutOfProfPktsFc7Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc7Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfPktsFc7." ::= { vRtrMplsLspStatisticsEntry 71 } vRtrMplsOutOfProfPktsFc7High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfPktsFc7High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfPktsFc7." ::= { vRtrMplsLspStatisticsEntry 72 } vRtrMplsOutOfProfOctetsFc0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc0 indicates the number of out of profile octets received for Forwarding Class 0." ::= { vRtrMplsLspStatisticsEntry 73 } vRtrMplsOutOfProfOctetsFc0Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc0Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc0." ::= { vRtrMplsLspStatisticsEntry 74 } vRtrMplsOutOfProfOctetsFc0High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc0High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc0." ::= { vRtrMplsLspStatisticsEntry 75 } vRtrMplsOutOfProfOctetsFc1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc1 indicates the number of out of profile octets received for Forwarding Class 1." ::= { vRtrMplsLspStatisticsEntry 76 } vRtrMplsOutOfProfOctetsFc1Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc1Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc1." ::= { vRtrMplsLspStatisticsEntry 77 } vRtrMplsOutOfProfOctetsFc1High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc1High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc1." ::= { vRtrMplsLspStatisticsEntry 78 } vRtrMplsOutOfProfOctetsFc2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc2 indicates the number of out of profile octets received for Forwarding Class 2." ::= { vRtrMplsLspStatisticsEntry 79 } vRtrMplsOutOfProfOctetsFc2Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc2Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc2." ::= { vRtrMplsLspStatisticsEntry 80 } vRtrMplsOutOfProfOctetsFc2High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc2High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc2." ::= { vRtrMplsLspStatisticsEntry 81 } vRtrMplsOutOfProfOctetsFc3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc3 indicates the number of out of profile octets received for Forwarding Class 3." ::= { vRtrMplsLspStatisticsEntry 82 } vRtrMplsOutOfProfOctetsFc3Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc3Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc3." ::= { vRtrMplsLspStatisticsEntry 83 } vRtrMplsOutOfProfOctetsFc3High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc3High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc3." ::= { vRtrMplsLspStatisticsEntry 84 } vRtrMplsOutOfProfOctetsFc4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc4 indicates the number of out of profile octets received for Forwarding Class 4." ::= { vRtrMplsLspStatisticsEntry 85 } vRtrMplsOutOfProfOctetsFc4Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc4Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc4." ::= { vRtrMplsLspStatisticsEntry 86 } vRtrMplsOutOfProfOctetsFc4High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc4High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc4." ::= { vRtrMplsLspStatisticsEntry 87 } vRtrMplsOutOfProfOctetsFc5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc5 indicates the number of out of profile octets received for Forwarding Class 5." ::= { vRtrMplsLspStatisticsEntry 88 } vRtrMplsOutOfProfOctetsFc5Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc5Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc5." ::= { vRtrMplsLspStatisticsEntry 89 } vRtrMplsOutOfProfOctetsFc5High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc5High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc5." ::= { vRtrMplsLspStatisticsEntry 90 } vRtrMplsOutOfProfOctetsFc6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc6 indicates the number of out of profile octets received for Forwarding Class 6." ::= { vRtrMplsLspStatisticsEntry 91 } vRtrMplsOutOfProfOctetsFc6Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc6Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc6." ::= { vRtrMplsLspStatisticsEntry 92 } vRtrMplsOutOfProfOctetsFc6High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc6High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc6." ::= { vRtrMplsLspStatisticsEntry 93 } vRtrMplsOutOfProfOctetsFc7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc7 indicates the number of out of profile octets received for Forwarding Class 7." ::= { vRtrMplsLspStatisticsEntry 94 } vRtrMplsOutOfProfOctetsFc7Low32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc7Low32 indicates the lower 32 bits of the value of vRtrMplsOutOfProfOctetsFc7." ::= { vRtrMplsLspStatisticsEntry 95 } vRtrMplsOutOfProfOctetsFc7High32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsOutOfProfOctetsFc7High32 indicates the higher 32 bits of the value of vRtrMplsOutOfProfOctetsFc7." ::= { vRtrMplsLspStatisticsEntry 96 } vRtrMplsLspStatsPSBMatch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspStatsPSBMatch indicates if a path state block (PSB) match was made against this LSP name." ::= { vRtrMplsLspStatisticsEntry 97 } vRtrMplsLspStatsTpOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspStatsTpOnly indicates whether the statistics apply to mpls-tp lsp or for regular rsvp-te signalled terminating LSP. The value of 'true' indicates the statistics apply to mpls-tp LSP only. The value of 'false' indicates the statistics apply for regular rsvp-te signalled terminating LSP." ::= { vRtrMplsLspStatisticsEntry 98 } vRtrMplsLspStatsLspType OBJECT-TYPE SYNTAX INTEGER { unknown (0), p2p (1), p2mp (2), autoP2p (3), autoP2mp (4), tpLsp (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspStatsLspType indicates whether the statistics apply to MPLS-TP, P2P, P2MP, Auto P2P or Auto P2MP LSP. When the value of vRtrMplsLspStatsTpOnly is 'true', the statistics apply for MPLS-TP LSP only and vRtrMplsLspStatsLspType is set to 'tpLsp'. When the value of vRtrMplsLspStatsTpOnly is 'false', the statistics apply for regular RSVP-TE signalled terminating LSP and the value of vRtrMplsLspStatsLspType can be set to either p2p, p2mp, autoP2p or autoP2mp." ::= { vRtrMplsLspStatisticsEntry 99 } ---- -- The Virtual Router MPLS Labeled Switch Path Template(Lsp-Template) Table ---- vRtrMplsLspTemplateTblLastChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateTblLastChgd indicates the sysUpTime at the time of the last modification of an entry in the vRtrMplsLspTemplateTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 40 } vRtrMplsLspTemplateTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspTemplateTable has an entry for each Labeled Switch Path Template(LSP Template) configured for a virtual router in the system. The table contains a list of LSP Templates that are referenced when dynamic LSP creation is required." ::= { tmnxMplsObjs 41 } vRtrMplsLspTemplateEntry OBJECT-TYPE SYNTAX VRtrMplsLspTemplateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Labeled Switch Path Template (LSP Template) configured for a virtual router in the system. Entries in this table can be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrMplsLspTemplateName } ::= { vRtrMplsLspTemplateTable 1 } VRtrMplsLspTemplateEntry ::= SEQUENCE { vRtrMplsLspTemplateName TNamedItem, vRtrMplsLspTemplateRowStatus RowStatus, vRtrMplsLspTemplateLastChanged TimeStamp, vRtrMplsLspTemplateAdminState TmnxAdminState, vRtrMplsLspTemplateType INTEGER, vRtrMplsLspTemplateAdaptive TruthValue, vRtrMplsLspTemplateBandwidth Integer32, vRtrMplsLspTemplateCspf TruthValue, vRtrMplsLspTemplateDefaultPath MplsTunnelIndex, vRtrMplsLspTemplateAdmGrpIncl Unsigned32, vRtrMplsLspTemplateAdmGrpExcl Unsigned32, vRtrMplsLspTemplateFastReroute TruthValue, vRtrMplsLspTemplateFRMethod INTEGER, vRtrMplsLspTemplateFRHopLimit Unsigned32, vRtrMplsLspTemplateHopLimit Unsigned32, vRtrMplsLspTemplateRecord INTEGER, vRtrMplsLspTemplateRecordLabel INTEGER, vRtrMplsLspTemplateRetryLimit Unsigned32, vRtrMplsLspTemplateRetryTimer Unsigned32, vRtrMplsLspTemplateCspfTeMetric TruthValue, vRtrMplsLspTemplateLspCount Gauge32, vRtrMplsLspTemplateMvpnRefCount Gauge32, vRtrMplsLspTemplateFRPropAdmGrp TruthValue, vRtrMplsLspTemplatePropAdmGrp TruthValue, vRtrMplsLspTemplateBgpShortcut TruthValue, vRtrMplsLspTemplateIgpShortcut TruthValue, vRtrMplsLspTemplateLdpOverRsvp TruthValue, vRtrMplsLspTemplateLeastFill TruthValue, vRtrMplsLspTemplateMetric Unsigned32, vRtrMplsLspTemplateSetupPriority Unsigned32, vRtrMplsLspTemplateHoldPriority Unsigned32, vRtrMplsLspTemplateVprnAutoBind TruthValue, vRtrMplsLspTempIgpSCutLfaType INTEGER, vRtrMplsLspTempIgpSCutRelOffset Integer32, vRtrMplsLspTempAutoBandwidth TruthValue, vRtrMplsLspTempFRNodeProtect TruthValue, vRtrMplsLspTemplateEgrStats TruthValue, vRtrMplsLspTempCollectStats TruthValue, vRtrMplsLspTempAccntingPolicy Unsigned32, vRtrMplsLspTemplateFromAddrType InetAddressType, vRtrMplsLspTemplateFromAddr InetAddress, vRtrMplsLspTemplateClassType TmnxRsvpDSTEClassType, vRtrMplsLspTempBkupClassType TmnxRsvpDSTEClassType, vRtrMplsLspTempBgpTransportTunn TmnxMplsLspBgpRSVPLSPTunState, vRtrMplsLspTempMainCTRetryLimit Unsigned32, vRtrMplsLspTemplateRsvpAdspec TruthValue, vRtrMplsLspTempLoadBalancingWt Unsigned32, vRtrMplsLspTempClassFwdEnabled TruthValue, vRtrMplsLspTempFC TmnxCBFClasses, vRtrMplsLspTempBfdTemplateName TNamedItemOrEmpty, vRtrMplsLspTempBfdEnable TruthValue, vRtrMplsLspTempBfdPingIntvl Unsigned32, vRtrMplsLspTempEntropyLabel INTEGER } vRtrMplsLspTemplateName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object vRtrMplsLspTemplateName specifies the name of the LSP Template which is used as a guideline to create and signal multiple LSP instances when dynamic LSP creation is required." ::= { vRtrMplsLspTemplateEntry 1 } vRtrMplsLspTemplateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateRowStatus specifies the Row Status for this entry." ::= { vRtrMplsLspTemplateEntry 2 } vRtrMplsLspTemplateLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateLastChanged indicates the timestamp of last change to this row in vRtrMplsLspTemplateTable." ::= { vRtrMplsLspTemplateEntry 3 } vRtrMplsLspTemplateAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateAdminState specifies the current administrative state of the LSP Template." DEFVAL { outOfService } ::= { vRtrMplsLspTemplateEntry 4 } vRtrMplsLspTemplateType OBJECT-TYPE SYNTAX INTEGER { unknown (0), p2mp (1), onehopP2P (2), meshP2P (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateType specifies the type of the LSP template. When the value of vRtrMplsLspTemplateType is set to 'p2mp', the template is used for auto creation of P2MP LSPs. When the value of vRtrMplsLspTemplateType is set to 'onehopP2P', the template is used for auto creation of one-Hop P2P LSPs. When the value of vRtrMplsLspTemplateType is set to 'meshP2P', the template is used for auto creation of mesh P2P LSPs." DEFVAL { unknown } ::= { vRtrMplsLspTemplateEntry 5 } vRtrMplsLspTemplateAdaptive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateAdaptive specifies whether the make-before-break functionality is enabled for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateAdaptive is set to 'true', make-before-break functionality is enabled. When the value is set to 'false' make-before-break functionality is disabled." DEFVAL { true } ::= { vRtrMplsLspTemplateEntry 6 } vRtrMplsLspTemplateBandwidth OBJECT-TYPE SYNTAX Integer32 (0..100000) UNITS "mega-bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateBandwidth specifies the amount of bandwidth in mega-bits per seconds (Mbps) to be reserved for the LSPs that are dynamically created using this LSP template. A value of zero (0) indicates that no bandwidth is reserved." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 7 } vRtrMplsLspTemplateCspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateCspf specifies whether the CSPF computation for constrained-path LSP is enabled for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateCspf is set to 'true', CSPF computation for constrained-path is enabled. When the value is set to 'false', CSPF computation for constrained-path is disabled." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 8 } vRtrMplsLspTemplateDefaultPath OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateDefaultPath specifies the default path used to signal LSPs that are dynamically created using this LSP template. If a corresponding index does not exist in MPLS-TE-MIB::mplsTunnelTable, an 'inconsistentValue' error will be returned. " DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 9 } vRtrMplsLspTemplateAdmGrpIncl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateAdmGrpIncl specifies a bit-map of admin groups that are included when the dynamically created LSPs using this template are setup . If bit 'n' is set, then the admin group with value 'n' is included. This implies that each link that the LSP goes through must be associated with at least one of the admin groups in the include list. By default, all admin groups are in the include list." DEFVAL { '00000000'H } ::= { vRtrMplsLspTemplateEntry 10 } vRtrMplsLspTemplateAdmGrpExcl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateAdmGrpExcl specifies a bit-map of admin groups that are excluded when the dynamically created LSPs using this template are setup. If bit 'n' is set, then the admin group with value 'n' is excluded. This implies that each link that the LSP goes through must not be associated with any of the admin groups in the exclude list. By default, no admin groups are in the exclude list." DEFVAL { '00000000'H } ::= { vRtrMplsLspTemplateEntry 11 } vRtrMplsLspTemplateFastReroute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateFastReroute specifies whether fast reroute is enabled for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateFastReroute is set to 'true', fast reroute is enabled for the LSP. When the value of vRtrMplsLspTemplateFastReroute is set to 'false', fast reroute is disabled." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 12 } vRtrMplsLspTemplateFRMethod OBJECT-TYPE SYNTAX INTEGER { oneToOneBackup(1), facilityBackup(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateFRMethod specifies the fast reroute method used for the LSPs that are dynamically created using this LSP template. When the value of vRtrMplsLspTemplateFRMethod is set to 'oneToOneBackup', a backup LSP is established which will intersect the original LSP somewhere downstream of the point of link or node failure. For each LSP that is backed up, a separate backup LSP is established. When the value of vRtrMplsLspTemplateFRMethod is set to 'facilityBackup', Instead of creating a separateLSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. For LSP templates of type P2MP, oneToOneBackup is not supported." DEFVAL { facilityBackup } ::= { vRtrMplsLspTemplateEntry 13 } vRtrMplsLspTemplateFRHopLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateFRHopLimit specifies the total number of hops a detour or backup LSP can take before merging back onto the main LSP path." DEFVAL { 16 } ::= { vRtrMplsLspTemplateEntry 14 } vRtrMplsLspTemplateHopLimit OBJECT-TYPE SYNTAX Unsigned32 (2..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateHopLimit specifies the maximum number of hops that a dynamically created LSP will traverse including the ingress and egress ESRs. A LSP will not be set up if the hop limit is exceeded." DEFVAL { 255 } ::= { vRtrMplsLspTemplateEntry 15 } vRtrMplsLspTemplateRecord OBJECT-TYPE SYNTAX INTEGER { record (1), noRecord (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateRecord specifies whether the recording of all the hops is enabled for LSPs that are dynamically created using this template. When the value of vRtrMplsLspTemplateRecord is set to 'record', recording of all the hops that a LSP traverses is enabled. When the value of vRtrMplsLspTemplateRecord is set to 'noRecord', recording of all the hops that a LSP traverses is disabled." DEFVAL { record } ::= { vRtrMplsLspTemplateEntry 16 } vRtrMplsLspTemplateRecordLabel OBJECT-TYPE SYNTAX INTEGER { record (1), noRecord (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateRecordLabel specifies whether the recording of labels is enabled for LSPs that are dynamically created using this LSP template . When the value of vRtrMplsLspTemplateRecordLabel is set to 'record', recording of labels at each node that a LSP traverses is enabled. When the value of vRtrMplsLspTemplateRecordLabel is set to 'noRecord', recording of labels at each node that a LSP traverses is disabled." DEFVAL { record } ::= { vRtrMplsLspTemplateEntry 17 } vRtrMplsLspTemplateRetryLimit OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateRetryLimit specifies the maximum number of attempts made to establish an LSP that is dynamically created using this template. A value of zero(0) specifies that an infinite number of retry attempts should be made." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 18 } vRtrMplsLspTemplateRetryTimer OBJECT-TYPE SYNTAX Unsigned32 (1..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateRetryTimer specifies the time in seconds a dynamically created Lsp waits before it attempts to re-establish itself." DEFVAL { 30 } ::= { vRtrMplsLspTemplateEntry 19 } vRtrMplsLspTemplateCspfTeMetric OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateCspfTeMetric specifies whether the TE metric is used for the purpose of the LSP path computation by CSPF (Constrained Shortest Path First). When the value of vRtrMplsLspTemplateCspfTeMetric is set to 'true', the TE metric is used to compute the path of the LSP by CSPF. When the value of vRtrMplsLspTemplateCspfTeMetric is set to 'false', IGP metric is used to compute the path of the LSP by CSPF." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 20 } vRtrMplsLspTemplateLspCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateLspCount indicates the number of LSPs of type 'p2mpAuto' that are created using this template." ::= { vRtrMplsLspTemplateEntry 21 } vRtrMplsLspTemplateMvpnRefCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateMvpnRefCount indicates the number of MVPNs as well as number of P2MP LSP users associated to this template." ::= { vRtrMplsLspTemplateEntry 22 } vRtrMplsLspTemplateFRPropAdmGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateFRPropAdmGrp specifies whether or not the use of administrative group constraints on a FRR backup LSP is enabled. If vRtrMplsLspTemplateFastReroute is set to 'true', the value of vRtrMplsLspTemplateFRPropAdmGrp specifies whether or not the administrative group constraints are signaled in the vRtrMplsLspTemplateFastReroute object. If vRtrMplsLspTemplateFastReroute is set to 'false', the value of vRtrMplsLspTemplateFRPropAdmGrp is insignificant." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 23 } vRtrMplsLspTemplatePropAdmGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplatePropAdmGrp specifies whether the propagation of session attribute object with resource affinity (C-type 1) in PATH message is enabled for the LSPs that are dynamically created using this LSP template. By default, the value of vRtrMplsLspTemplatePropAdmGrp is 'false' which specifies the session attribute object without resource affinity (C-Type 7) is propagated in PATH message and the admin-groups are ignored on Label Switched Router(LSR) while doing CSPF calculation." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 24 } vRtrMplsLspTemplateBgpShortcut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateBgpShortcut specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving BGP routes. When the value of vRtrMplsLspTemplateBgpShortcut is set to 'true' the RSVP LSP is used as a shortcut while resolving BGP routes. When the value of vRtrMplsLspTemplateBgpShortcut is set to 'false' the RSVP LSP is not used as a shortcut while resolving BGP routes." DEFVAL { true } ::= { vRtrMplsLspTemplateEntry 25 } vRtrMplsLspTemplateIgpShortcut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateIgpShortcut specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving IGP routes. When the value of vRtrMplsLspTemplateIgpShortcut is set to 'true' the RSVP LSP is used as a shortcut while resolving IGP routes. When the value of vRtrMplsLspTemplateIgpShortcut is set to 'false' the RSVP LSP is not used as a shortcut while resolving IGP routes." DEFVAL { true } ::= { vRtrMplsLspTemplateEntry 26 } vRtrMplsLspTemplateLdpOverRsvp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateLdpOverRsvp specifies that this LSP can be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS) will subsequently provide LDP with all ECMP IGP next-hops and tunnel endpoints that it considers to be the lowest cost path to the destination. If an IGP calculation and an LDP over RSVP produce the same cost then LDP will always prefer an LDP over RSVP tunnel over an IGP route. By default, static and dynamic LSPs will be included when they are created. The default value for p2mp and bypass-only LSPs will be 'false'." DEFVAL { true } ::= { vRtrMplsLspTemplateEntry 27 } vRtrMplsLspTemplateLeastFill OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateLeastFill specifies whether the use of the least-fill path selection method for the computation of the path of this LSP template is enabled. By default, the path of an LSP is randomly chosen among a set of equal cost paths." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 28 } vRtrMplsLspTemplateMetric OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateMetric specifies the metric for this LSP which is used to select an LSP among a set of LSPs which are destined to the same egress 7x50 router. The LSP with the lowest metric will be selected. In LDP-over-RSVP, LDP performs a lookup in the Routing Table Manager (RTM) which provides the next hop to the destination PE and the advertising router (ABR or destination PE itself). If the advertising router matches the targeted LDP peer, LDP then performs a second lookup for the advertising router in the Tunnel Table Manager (TTM). This lookup returns the best RSVP LSP to use to forward packets for an LDP FEC learned through the targeted LDP session. The lookup returns the LSP with the lowest metric. If multiple LSPs have the same metric, then the result of the lookup will be to select the first one available in the TTM. A value of '0' indicates metric is not to be used." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 29 } vRtrMplsLspTemplateSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateSetupPriority specifies the setup priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority." DEFVAL { 7 } ::= { vRtrMplsLspTemplateEntry 30 } vRtrMplsLspTemplateHoldPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateHoldPriority specifies the hold priority to use when insufficient bandwidth is available to setup a LSP. The setup priority is compared against the hold priority of existing LSPs. If the setup priority is higher than the hold priority of the established LSPs, this LSP may preempt the other LSPs. A value of zero (0) is the highest priority and a value of seven (7) is the lowest priority." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 31 } vRtrMplsLspTemplateVprnAutoBind OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateVprnAutoBind specifies whether the LSP can be used as part of the auto-bind feature for VPRN services. By default a LSP is available for inclusion to be used for the auto-bind feature. By default, static and dynamic LSPs will be included when they are created. The default value for p2mp and bypass-only LSPs will be 'false'." DEFVAL { true } ::= { vRtrMplsLspTemplateEntry 32 } vRtrMplsLspTempIgpSCutLfaType OBJECT-TYPE SYNTAX INTEGER { none (0), lfaProtect (1), lfaOnly (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempIgpSCutLfaType specifies whether to exclude or include a RSVP LSP from being used as a shortcut while resolving IGP routes in LFA SPF or whether to exclude or include a RSVP LSP from being used as a LFA SPF. When the value of vRtrMplsLspTempIgpSCutLfaType is set to 'lfaProtect' the RSVP LSP is used as a shortcut while resolving IGP routes in LFA SPF as well. When the value of vRtrMplsLspTempIgpSCutLfaType is set to 'lfaOnly' the RSVP LSP is used as a LFA SPF and not used as igp-shortcut in regular SPF. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when the value of the object vRtrMplsLspTemplateIgpShortcut is not set to 'true'." DEFVAL { none } ::= { vRtrMplsLspTemplateEntry 33 } vRtrMplsLspTempIgpSCutRelOffset OBJECT-TYPE SYNTAX Integer32 (-10 .. 10 | 2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempIgpSCutRelOffset specifies the the relative offset to the IGP metric on the SPF tree. The SPF tree is updated with the current IGP metric of the path between the endpoints of the LSP minus the value of vRtrMplsLspTempIgpSCutRelOffset. The default value of 2147483647 indicates the relative metric offset is not to be considered." DEFVAL { 2147483647 } ::= { vRtrMplsLspTemplateEntry 34 } vRtrMplsLspTempAutoBandwidth OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the vRtrMplsLspTempAutoBandwidth specifies whether automatic bandwidth adjustment has been enabled or disabled for this LSP template. A value of 'true' specifies that automatic bandwidth adjustment has been enabled for this LSP template and a value of 'false' specifies that automatic bandwidth adjustment has been disabled for this LSP template." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 35 } vRtrMplsLspTempFRNodeProtect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempFRNodeProtect specifies whether node protect has been enabled or disabled for this LSP template. A value of 'true' specifies that node protection i.e. protection against the failure of a node on the LSP template is enabled. A value of 'false' specifies that node protection is disabled." DEFVAL { true } ::= { vRtrMplsLspTemplateEntry 36 } vRtrMplsLspTemplateEgrStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateEgrStats specifies whether egress statistics has been enabled or disabled for this LSP template. A value of 'true' specifies egress statistics is enabled on this LSP template. A value of 'false' specifies that egress statistics is disabled on this LSP template." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 37 } vRtrMplsLspTempCollectStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempCollectStats specifies whether to collect statistics for this prefix." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 38 } vRtrMplsLspTempAccntingPolicy OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..99) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempAccntingPolicy specifies the accounting policy to be used for this entry. A value of zero indicates that the default accounting policy should be used." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 39 } vRtrMplsLspTemplateFromAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateFromAddrType specifies the IP address type of vRtrMplsLspTemplateFromAddr." DEFVAL { unknown } ::= { vRtrMplsLspTemplateEntry 40 } vRtrMplsLspTemplateFromAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrMplsLspTemplateFromAddr specifies the source address of this LSP template. The address type of vRtrMplsLspTemplateFromAddr is specified by vRtrMplsLspTemplateFromAddrType. When vRtrMplsLspTemplateFromAddr has not been explicitly set, the system IP address will be used." DEFVAL { ''H } ::= { vRtrMplsLspTemplateEntry 41 } vRtrMplsLspTemplateClassType OBJECT-TYPE SYNTAX TmnxRsvpDSTEClassType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateClassType specifies the class type (CT) associated with this LSP template." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 42 } vRtrMplsLspTempBkupClassType OBJECT-TYPE SYNTAX TmnxRsvpDSTEClassType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempBkupClassType specifies the backup class type (CT) associated with this LSP template." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 43 } vRtrMplsLspTempBgpTransportTunn OBJECT-TYPE SYNTAX TmnxMplsLspBgpRSVPLSPTunState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempBgpTransportTunn specifies whether an RSVP LSP is allowed or blocked in its usage as a transport LSP for BGP tunnel routes. When the value of vRtrMplsLspTempBgpTransportTunn is set to 'include' an RSVP LSP is allowed to be used as a transport LSP for BGP tunnel routes. When the value of vRtrMplsLspTempBgpTransportTunn is set to 'exclude' an RSVP LSP is not allowed to be used as a transport LSP for BGP tunnel routes." DEFVAL { include } ::= { vRtrMplsLspTemplateEntry 44 } vRtrMplsLspTempMainCTRetryLimit OBJECT-TYPE SYNTAX Unsigned32 (0..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempMainCTRetryLimit specifies the number of attempts the software should make before it can start using the backup class type." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 45 } vRtrMplsLspTemplateRsvpAdspec OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplateRsvpAdspec specifies whether or not the ADSPEC object will be included in RSVP messages. When the value of vRtrMplsLspTemplateRsvpAdspec is 'true', the ADSPEC object will be included in RSVP messages. When the value of vRtrMplsLspTemplateRsvpAdspec is 'false', the ADSPEC object will not be included in RSVP messages." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 46 } vRtrMplsLspTempLoadBalancingWt OBJECT-TYPE SYNTAX Unsigned32 (0|1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempLoadBalancingWt specifies the load balancing weight applied to this Labeled Switch Path(LSP) template. When a system level load-balancing command is enabled, packets forwarded to a set of ECMP tunnel next-hops will be sprayed using this weight configured for this LSP template." DEFVAL { 0 } ::= { vRtrMplsLspTemplateEntry 47 } vRtrMplsLspTempClassFwdEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempClassFwdEnabled specifies whether class based forwarding over this MPLS LSP template is enabled or not." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 48 } vRtrMplsLspTempFC OBJECT-TYPE SYNTAX TmnxCBFClasses MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempFC specifies a set of forwarding classes configured for this LSP template expressed as a bit map. If a bit from 0 through 7 is set, then the corresponding forwarding class has been configured for this LSP template. If bit 8 is set, this LSP template has been designated as the default forwarding LSP." DEFVAL { { } } ::= { vRtrMplsLspTemplateEntry 49 } vRtrMplsLspTempBfdTemplateName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempBfdTemplateName specifies the TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP template." ::= { vRtrMplsLspTemplateEntry 50 } vRtrMplsLspTempBfdEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempBfdEnable specifies whether BFD is enabled or not for this LSP template." DEFVAL { false } ::= { vRtrMplsLspTemplateEntry 51 } vRtrMplsLspTempBfdPingIntvl OBJECT-TYPE SYNTAX Unsigned32 (0|60..300) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempBfdPingIntvl specifies the time interval for periodic LSP ping for BFD bootstrapping. When the value of vRtrMplsLspTempBfdPingIntvl is set to '0', it disables LSP pings for BFD bootstrapping." DEFVAL { 60 } ::= { vRtrMplsLspTemplateEntry 52 } vRtrMplsLspTempEntropyLabel OBJECT-TYPE SYNTAX INTEGER { forceDisable(1), enable (2), inherit (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempEntropyLabel specifies whether the application takes into account the value of Entropy Label and Entropy Label Capability in the label stack for this LSP template. When the value of vRtrMplsLspTempEntropyLabel is set to 'enable', the application will account for EL/ELC in the label stack without taking into consideration the value of the enabled ELC. When the value of vRtrMplsLspTempEntropyLabel is set to 'force-disable' , the application will ignore the value of enabled ELC. When the value of vRtrMplsLspTempEntropyLabel is modified, Entropy Label will become operational when this LSP template is re-signaled. By default, this LSP template will inherit the behavior as set by vRtrMplsGeneralEntropyLblRsvpTe." DEFVAL { inherit } ::= { vRtrMplsLspTemplateEntry 53 } -- -- The Virtual Router MPLS Labeled Switch Path (LSP) Auto Bandwidth Table -- vRtrMplsLspAutoBWTableLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWTableLastChg indicates the sysUpTime at the time of the last modification to vRtrMplsLspAutoBandwidthTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 42 } vRtrMplsLspAutoBandwidthTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspAutoBandwidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspAutoBandwidthTable has an entry for auto bandwidth configuration for each Labeled Switch Path (LSP) configured for a virtual router in the system." ::= { tmnxMplsObjs 43 } vRtrMplsLspAutoBandwidthEntry OBJECT-TYPE SYNTAX VRtrMplsLspAutoBandwidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents auto bandwidth configuration for a Labeled Switch Path (LSP) configured for a virtual router in the system." INDEX { vRtrID, vRtrMplsLspAutoBWLspName } ::= { vRtrMplsLspAutoBandwidthTable 1 } VRtrMplsLspAutoBandwidthEntry ::= SEQUENCE { vRtrMplsLspAutoBWLspName TLNamedItem, vRtrMplsLspAutoBWLastChange TimeStamp, vRtrMplsLspAutoBWAdjDNPercent Unsigned32, vRtrMplsLspAutoBWAdjDNMbps Unsigned32, vRtrMplsLspAutoBWAdjMultiplier Unsigned32, vRtrMplsLspAutoBWAdjUPPercent Unsigned32, vRtrMplsLspAutoBWAdjUPMbps Unsigned32, vRtrMplsLspAutoBWMaxBW Unsigned32, vRtrMplsLspAutoBWMinBW Unsigned32, vRtrMplsLspAutoBWMonitorBW TruthValue, vRtrMplsLspAutoBWOverFlow Unsigned32, vRtrMplsLspAutoBWOvrFlwThreshold Unsigned32, vRtrMplsLspAutoBWOvrFlwBW Unsigned32, vRtrMplsLspAutoBWSampMultiplier Unsigned32, vRtrMplsLspAutoBWSampTime Unsigned32, vRtrMplsLspAutoBWLastAdj TimeStamp, vRtrMplsLspAutoBWLastAdjCause TmnxMplsLspAutoBWLastAdjCause, vRtrMplsLspAutoBWNextAdj Unsigned32, vRtrMplsLspAutoBWMaxAvgRate Unsigned32, vRtrMplsLspAutoBWLastAvgRate Unsigned32, vRtrMplsLspAutoBWInheritance Unsigned32, vRtrMplsLspAutoBWCurrentBW Unsigned32, vRtrMplsLspAutoBWAdjTime Unsigned32, vRtrMplsLspAutoBWOvrFlwCount Unsigned32, vRtrMplsLspAutoBWSampCount Unsigned32, vRtrMplsLspAutoBWAdjCount Unsigned32, vRtrMplsLspAutoBWOperState TmnxEnabledDisabled, vRtrMplsLspAutoBWSampInterval Unsigned32, vRtrMplsLspAutoBWBeWeight Unsigned32, vRtrMplsLspAutoBWL2Weight Unsigned32, vRtrMplsLspAutoBWAfWeight Unsigned32, vRtrMplsLspAutoBWL1Weight Unsigned32, vRtrMplsLspAutoBWH2Weight Unsigned32, vRtrMplsLspAutoBWEfWeight Unsigned32, vRtrMplsLspAutoBWH1Weight Unsigned32, vRtrMplsLspAutoBWNcWeight Unsigned32, vRtrMplsLspAutoBWUnderFlow Unsigned32, vRtrMplsLspAutoBWUndFlwThreshold Unsigned32, vRtrMplsLspAutoBWUndFlwBW Unsigned32, vRtrMplsLspAutoBWUndFlwCount Counter32, vRtrMplsLspAutoBWMaxUndFlwBw Unsigned32 } vRtrMplsLspAutoBWLspName OBJECT-TYPE SYNTAX TLNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWLspName uniquely identifies a row in the vRtrMplsLspAutoBandwidthTable. If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p', vRtrMplsLspAutoBWLspName can have a maximum of 32 characters." ::= { vRtrMplsLspAutoBandwidthEntry 1 } vRtrMplsLspAutoBWLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUpTime when this row was last modified." ::= { vRtrMplsLspAutoBandwidthEntry 2 } vRtrMplsLspAutoBWAdjDNPercent OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAdjDNPercent specifies minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for decreasing the bandwidth of the LSP. At the adjust interval expiry, if the measured bandwidth falls below the current bandwidth by the value of vRtrMplsLspAutoBWAdjDNPercent it can cause a re-signaling attempt for the LSP When the value of vRtrMplsLspAutoBWAdjDNPercent is 0 it means that this threshold check is always true for any measured bandwidth less than current bandwidth" DEFVAL { 5 } ::= { vRtrMplsLspAutoBandwidthEntry 3 } vRtrMplsLspAutoBWAdjDNMbps OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAdjDNMbps specifies the minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as an absolute bandwidth (Mbps), for decreasing the bandwidth of the LSP." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 4 } vRtrMplsLspAutoBWAdjMultiplier OBJECT-TYPE SYNTAX Unsigned32 (1..16383) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAdjMultiplier specifies the number of collection intervals in the adjust interval. The default value is derived from vRtrMplsGeneralAutoBWDefAdjMul and vRtrMplsLspAutoBWAdjCount." DEFVAL { 288 } ::= { vRtrMplsLspAutoBandwidthEntry 5 } vRtrMplsLspAutoBWAdjUPPercent OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAdjUPPercent specifies minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspAutoBWAdjUPPercent it can cause a re-signaling attempt for the LSP When the value of vRtrMplsLspAutoBWAdjUPPercent is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth" DEFVAL { 5 } ::= { vRtrMplsLspAutoBandwidthEntry 6 } vRtrMplsLspAutoBWAdjUPMbps OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAdjUPMbps specifies the minimum difference between the current bandwidth reservation of the LSP and the (measured) maximum average data rate, expressed as an absolute bandwidth (Mbps), for increasing the bandwidth of the LSP." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 7 } vRtrMplsLspAutoBWMaxBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWMaxBW specifies the maximum that auto-bandwidth allocation is allowed to request for a LSP." DEFVAL { 100000 } ::= { vRtrMplsLspAutoBandwidthEntry 8 } vRtrMplsLspAutoBWMinBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWMinBW specifies the minimum that auto-bandwidth allocation is allowed to request for a LSP." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 9 } vRtrMplsLspAutoBWMonitorBW OBJECT-TYPE SYNTAX TruthValue UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWMonitorBW specifies whether the collection and display of auto-bandwidth measurements is enabled or disabled for the LSP. When the value of vRtrMplsLspAutoBWMonitorBW is 'true' the collection and display of auto-bandwidth measurements is enabled and when the value is 'false' it is disabled." DEFVAL { false } ::= { vRtrMplsLspAutoBandwidthEntry 10 } vRtrMplsLspAutoBWOverFlow OBJECT-TYPE SYNTAX Unsigned32 (0|1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWOverFlow specifies number of overflow samples that triggers an overflow auto-bandwidth adjustment attempt." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 11 } vRtrMplsLspAutoBWOvrFlwThreshold OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWOvrFlwThreshold specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as a percentage of the current bandwidth, for counting an overflow sample." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 12 } vRtrMplsLspAutoBWOvrFlwBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWOvrFlwBW specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as an absolute bandwidth (Mbps), for counting an overflow sample." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 13 } vRtrMplsLspAutoBWSampMultiplier OBJECT-TYPE SYNTAX Unsigned32 (1..511) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWSampMultiplier specifies the multiplier for collection intervals in a sample interval." DEFVAL { 1 } ::= { vRtrMplsLspAutoBandwidthEntry 14 } vRtrMplsLspAutoBWSampTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWSampTime indicates the sample multipler times the collection interval." ::= { vRtrMplsLspAutoBandwidthEntry 15 } vRtrMplsLspAutoBWLastAdj OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWLastAdj indicates the system time for the last auto-bandwidth adjustment." ::= { vRtrMplsLspAutoBandwidthEntry 16 } vRtrMplsLspAutoBWLastAdjCause OBJECT-TYPE SYNTAX TmnxMplsLspAutoBWLastAdjCause MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWLastAdjCause indicates the cause for the last auto-bandwidth adjustment." ::= { vRtrMplsLspAutoBandwidthEntry 17 } vRtrMplsLspAutoBWNextAdj OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWNextAdj indicates the system time when then adjust-timer will expire." ::= { vRtrMplsLspAutoBandwidthEntry 18 } vRtrMplsLspAutoBWMaxAvgRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWMaxAvgRate indicates the maximum average data rate in any sample interval of the current adjust interval." ::= { vRtrMplsLspAutoBandwidthEntry 19 } vRtrMplsLspAutoBWLastAvgRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWLastAvgRate indicates the average data rate in the sample interval that ended most recently." ::= { vRtrMplsLspAutoBandwidthEntry 20 } vRtrMplsLspAutoBWInheritance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrMplsGeneralTable, there is bit within vRtrMplsLspAutoBWInheritance that controls whether to inherit the operational value of the object or use the administratively set value. This object is a bit-mask, with the following positions: vRtrMplsLspAutoBWAdjMultiplier 0x1 vRtrMplsLspAutoBWSampMultiplier 0x2 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsGeneralTable." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 21 } vRtrMplsLspAutoBWCurrentBW OBJECT-TYPE SYNTAX Unsigned32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWCurrentBW indicates the current bandwidth reserved along the primary path." ::= { vRtrMplsLspAutoBandwidthEntry 22 } vRtrMplsLspAutoBWAdjTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAdjTime indicates the adjust multipler times the collection interval." ::= { vRtrMplsLspAutoBandwidthEntry 23 } vRtrMplsLspAutoBWOvrFlwCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWOvrFlwCount indicates the number of overflow samples since the last reset." ::= { vRtrMplsLspAutoBandwidthEntry 24 } vRtrMplsLspAutoBWSampCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWSampCount indicates the count in the sample interval." ::= { vRtrMplsLspAutoBandwidthEntry 25 } vRtrMplsLspAutoBWAdjCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAdjCount indicates the count in the adjust interval." ::= { vRtrMplsLspAutoBandwidthEntry 26 } vRtrMplsLspAutoBWOperState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWOperState indicates the opertional status for the LSP." ::= { vRtrMplsLspAutoBandwidthEntry 27 } vRtrMplsLspAutoBWSampInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWSampInterval indicates the number of sample intervals." ::= { vRtrMplsLspAutoBandwidthEntry 28 } vRtrMplsLspAutoBWBeWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWBeWeight specifies the weight in percent for forwarding class 'BE' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 29 } vRtrMplsLspAutoBWL2Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWL2Weight specifies the weight in percent for forwarding class 'L2' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 30 } vRtrMplsLspAutoBWAfWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWAfWeight specifies the weight in percent for forwarding class 'AF' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 31 } vRtrMplsLspAutoBWL1Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWL1Weight specifies the weight in percent for forwarding class 'L1' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 32 } vRtrMplsLspAutoBWH2Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWH2Weight specifies the weight in percent for forwarding class 'H2' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 33 } vRtrMplsLspAutoBWEfWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWEfWeight specifies the weight in percent for forwarding class 'EF' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 34 } vRtrMplsLspAutoBWH1Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWH1Weight specifies the weight in percent for forwarding class 'H1' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 35 } vRtrMplsLspAutoBWNcWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWNcWeight specifies the weight in percent for forwarding class 'NC' for the LSP." DEFVAL { 100 } ::= { vRtrMplsLspAutoBandwidthEntry 36 } vRtrMplsLspAutoBWUnderFlow OBJECT-TYPE SYNTAX Unsigned32 (0|1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWUnderFlow specifies the number of underflow samples that triggers an underflow auto-bandwidth adjustment attempt." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 37 } vRtrMplsLspAutoBWUndFlwThreshold OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWUndFlwThreshold specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as a percentage of the current bandwidth, for counting an underflow sample." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 38 } vRtrMplsLspAutoBWUndFlwBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWUndFlwBW specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as an absolute bandwidth (Mbps), for counting an underflow sample." DEFVAL { 0 } ::= { vRtrMplsLspAutoBandwidthEntry 39 } vRtrMplsLspAutoBWUndFlwCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWUndFlwCount indicates the number of underflow samples since the last reset." ::= { vRtrMplsLspAutoBandwidthEntry 40 } vRtrMplsLspAutoBWMaxUndFlwBw OBJECT-TYPE SYNTAX Unsigned32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspAutoBWMaxUndFlwBw indicates the maximum sampled bandwidth in the most recent consecutive underflow samples." ::= { vRtrMplsLspAutoBandwidthEntry 41 } -- -- The Virtual Router MPLS LSP Path Operational Status Table -- -- Augmentation of the vRtrMplsLspPathTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsLspPathTable, and the augmenting table, -- vRtrMplsLspPathOperTable. This in effect extends the vRtrMplsLspPathTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsLspPathTable results in -- the same fate for the row in the vRtrMplsLspPathOperTable. -- vRtrMplsLspPathOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspPathOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspPathOperTable has an entry for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable." ::= { tmnxMplsObjs 44 } vRtrMplsLspPathOperEntry OBJECT-TYPE SYNTAX VRtrMplsLspPathOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an operational status for an association between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable. Entries cannot be created and deleted via SNMP SET operations. A row entry will have valid operational status info when vRtrMplsLspPathOperState is set to inService." AUGMENTS { vRtrMplsLspPathEntry } ::= { vRtrMplsLspPathOperTable 1 } VRtrMplsLspPathOperEntry ::= SEQUENCE { vRtrMplsLspPathOperSetupPriority Unsigned32, vRtrMplsLspPathOperHoldPriority Unsigned32, vRtrMplsLspPathOperRecord INTEGER, vRtrMplsLspPathOperRecordLabel INTEGER, vRtrMplsLspPathOperHopLimit Unsigned32, vRtrMplsLspPathOperAdminGrpIncl Unsigned32, vRtrMplsLspPathOperAdminGrExcld Unsigned32, vRtrMplsLspPathOperCspf TruthValue, vRtrMplsLspPathOperCspfToFrstLs TruthValue, vRtrMplsLspPathOperLeastFill TruthValue, vRtrMplsLspPathOperRsvpAdspec TruthValue, vRtrMplsLspPathOperFRNodeProtect TruthValue, vRtrMplsLspPathOperPropAdminGrp TruthValue, vRtrMplsLspPathOperFRHopLimit Unsigned32, vRtrMplsLspPathOperFRPropAdmGrp TruthValue, vRtrMplsLspPathOperInterArea TruthValue } vRtrMplsLspPathOperSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperSetupPriority indicates the setup priority used by the operational LSP path. When make-before-break functionality for the LSP is enabled and if the path setup priority is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new setup priority settings has been established. While a new path is being signaled, the administrative value and the operational values of the path setup priority may differ. The value of vRtrMplsLspPathSetupPriority specifies the setup priority for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperSetupPriority specifies the setup priority for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 1 } vRtrMplsLspPathOperHoldPriority OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperHoldPriority indicates the hold priority used by the operational LSP path. When make-before-break functionality for the LSP is enabled and if the path hold priority is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new hold priority settings has been established. While a new path is being signaled, the administrative value and the operational values of the path hold priority may differ. The value of vRtrMplsLspPathHoldPriority specifies the hold priority for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperHoldPriority specifies the hold priority for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 2 } vRtrMplsLspPathOperRecord OBJECT-TYPE SYNTAX INTEGER { record (1), noRecord (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperRecord indicates whether the operational LSP path is recording or not recording all the traversed hops. When make-before-break functionality for the LSP is enabled and if the path hops recording setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of hops recording setting of the path may differ. The value of vRtrMplsLspPathRecord specifies the hops recording setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperRecord specifies the hops recording setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 3 } vRtrMplsLspPathOperRecordLabel OBJECT-TYPE SYNTAX INTEGER { record (1), noRecord (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperRecordLabel indicates whether the currently operational LSP path is recording or not recording the label allocated at each traversed node. When make-before-break functionality for the LSP is enabled and if the path label recording setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of label recording setting of the path may differ. The value of vRtrMplsLspPathRecordLabel specifies the label recording setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperRecordLabel specifies the label recording setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 4 } vRtrMplsLspPathOperHopLimit OBJECT-TYPE SYNTAX Unsigned32 (2..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperHopLimit indicates the maximum hops limit used by the currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the hop limit is changed at either LSP or LSP path level, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path hop limit may differ. The value of either vRtrMplsLspHopLimit or vRtrMplsLspPathHopLimit specifies the hop limit for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperHopLimit specifies the hop limit for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 5 } vRtrMplsLspPathOperAdminGrpIncl OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperAdminGrpIncl is a bit-map which indicates a list of admin groups included by the currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the list of included admin groups is changed at either LSP or LSP path level, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of either vRtrMplsLspAdminGroupInclude or vRtrMplsLspPathAdminGroupInclude specifies the include admin groups bit-map for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperAdminGrpIncl specifies the include admin groups bit-map for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 6 } vRtrMplsLspPathOperAdminGrExcld OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperAdminGrExcld is a bit-map which indicates a list of admin groups excluded by the currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the list of excluded admin groups is changed at either LSP or LSP path level, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of either vRtrMplsLspAdminGroupExclude or vRtrMplsLspPathAdminGroupExclude specifies the exclude admin groups bit-map for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperAdminGrExcld specifies the exclude admin groups bit-map for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 7 } vRtrMplsLspPathOperCspf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperCspf indicates whether the currently operational LSP path has used CSPF computation for constrained-path enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP CSPF setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspCspf specifies the CSPF setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperCspf specifies the CSPF setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 8 } vRtrMplsLspPathOperCspfToFrstLs OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrMplsLspPathOperCspfToFrstLs indicates whether the currently operational LSP path had CSPF to first loose hop enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP CSPF to First Loose Hop setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspCspfToFirstLoose specifies the CSPF to First Loose Hop setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperCspfToFrstLs specifies the CSPF to First Loose Hop setting for the existing LSP path. This object was deprecated in the 11.0 release." ::= { vRtrMplsLspPathOperEntry 9 } vRtrMplsLspPathOperLeastFill OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperLeastFill indicates whether the currently operational LSP path was computed with the least-fill path selection method. When make-before-break functionality for the LSP is enabled and if the LSP least-fill setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspLeastFill specifies the least-fill setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperLeastFill specifies the least-fill setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 10 } vRtrMplsLspPathOperRsvpAdspec OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperRsvpAdspec indicates whether the currently operational LSP path has ADSPEC object included in RSVP messages or not. When make-before-break functionality for the LSP is enabled and if the LSP adspec setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspRsvpAdspec specifies the adspec setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperRsvpAdspec specifies the adspec setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 11 } vRtrMplsLspPathOperFRNodeProtect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperFRNodeProtect indicates whether the currently operational LSP path has node protection enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP node protection setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspFRNodeProtect specifies the node protection setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperFRNodeProtect specifies the node protection setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 12 } vRtrMplsLspPathOperPropAdminGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperPropAdminGrp indicates whether the currently operational LSP path has propagation admin-groups enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP propagate admin groups setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspPropAdminGroup specifies the propagate admin groups setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperPropAdminGrp specifies the propagate admin groups setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 13 } vRtrMplsLspPathOperFRHopLimit OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperFRHopLimit indicates the total number of hops to be used by detour LSP before merging to currently operational LSP path. When make-before-break functionality for the LSP is enabled and if the LSP FR Hop Limit setting is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspFRHopLimit specifies the FR Hop Limit setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperFRHopLimit specifies the FR Hop Limit setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 14 } vRtrMplsLspPathOperFRPropAdmGrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperFRPropAdmGrp indicates whether the currently operational LSP path has propagation of admin groups in the FAST_REROUTE object enabled or disabled. When make-before-break functionality for the LSP is enabled and if the LSP FR propagate admin groups is changed, the resources allocated to the existing LSP paths will not be released until a new path with the new settings has been established. While a new path is being signaled, the administrative value and the operational values of the path may differ. The value of vRtrMplsLspFRPropAdminGroup specifies the FR propagate admin group setting for the new LSP path trying to be established whereas the value of vRtrMplsLspPathOperFRPropAdmGrp specifies the FR propagate admin group setting for the existing LSP path." ::= { vRtrMplsLspPathOperEntry 15 } vRtrMplsLspPathOperInterArea OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspPathOperInterArea indicates whether the operational LSP path is either inter-area or intra-area." ::= { vRtrMplsLspPathOperEntry 16 } -- -- -- Mpls Label Information -- vRtrMplsLabelObjs OBJECT IDENTIFIER ::= { tmnxMplsObjs 45 } vRtrMplsLabelMaxStaticLspLabels OBJECT-TYPE SYNTAX Unsigned32 (0..262112) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrMplsLabelMaxStaticLspLabels specifies the maximum number of Static LSP labels available on the system. vRtrMplsLabelMaxStaticLspLabels must be set along with vRtrMplsLabelMaxStaticSvcLabels. The total of both values should equal the maximum value allowed of 131040 or 262112 depending on the system. The maximum value of vRtrMplsLabelMaxStaticLspLabels value for most systems is 113040 labels (128 * 1024 less 32 reserved labels). The maximum value of vRtrMplsLabelMaxStaticLspLabels value for chassis mode D systems is 262112 labels (256 * 1024 less 32 reserved labels). vRtrMplsLabelMaxStaticLspLabels is obsoleted in 13.0, replaced by vRtrMplsLabelStaticLabelRange." DEFVAL { 2016 } ::= { vRtrMplsLabelObjs 1 } vRtrMplsLabelMaxStaticSvcLabels OBJECT-TYPE SYNTAX Unsigned32 (0..262112) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrMplsLabelMaxStaticSvcLabels specifies the maximum number of Static SVC labels available on the system. vRtrMplsLabelMaxStaticSvcLabels must be set along with vRtrMplsLabelMaxStaticLspLabels. The total of both values should equal the maximum value allowed of 113040 or 262112 depending on the system. The maximum value of vRtrMplsLabelMaxStaticLspLabels value for most systems is 113040 labels (128 * 1024 less 32 reserved labels). The maximum value of vRtrMplsLabelMaxStaticLspLabels value for chassis mode D systems is 262112 labels (256 * 1024 less 32 reserved labels). vRtrMplsLabelMaxStaticSvcLabels is obsoleted in 13.0, replaced by vRtrMplsLabelStaticLabelRange." DEFVAL { 16384 } ::= { vRtrMplsLabelObjs 2 } vRtrMplsLabelBgpLabelsHoldTimer OBJECT-TYPE SYNTAX Unsigned32(0..255) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLabelBgpLabelsHoldTimer specifies the number of seconds to wait before deleting a BGP label entry based on the next-hop from IOM." DEFVAL { 0 } ::= { vRtrMplsLabelObjs 3 } vRtrMplsLabelSegRouteStartLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 32..524287) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLabelSegRouteStartLabel specifies the start value label available for Segment Routing on the system. vRtrMplsLabelSegRouteStartLabel must be set along with vRtrMplsLabelSegRouteEndLabel." DEFVAL { 0 } ::= { vRtrMplsLabelObjs 4 } vRtrMplsLabelSegRouteEndLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 32..524287) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLabelSegRouteEndLabel specifies the end value label available for Segment Routing on the system. vRtrMplsLabelSegRouteStartLabel must be set along with vRtrMplsLabelSegRouteEndLabel." DEFVAL { 0 } ::= { vRtrMplsLabelObjs 5 } vRtrMplsLabelStaticLabelRange OBJECT-TYPE SYNTAX Unsigned32 (0..262112) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLabelStaticLabelRange specifies the range of the Static labels available on the system. vRtrMplsLabelStaticLabelRange maximum value can be 131040 or 262112 depending on the system. The maximum value of vRtrMplsLabelStaticLabelRange for most systems is 131040 labels (128 * 1024 less 32 reserved labels). The maximum value of vRtrMplsLabelStaticLabelRange for chassis mode D systems is 262112 labels (256 * 1024 less 32 reserved labels)." DEFVAL { 18400 } ::= { vRtrMplsLabelObjs 6 } -- -- The Virtual Router MPLS Labeled Switch Path (LSP) Template Auto Bandwidth Table -- vRtrMplsLspTempAutoBWTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWTblLastChg indicates the sysUpTime at the time of the last modification to vRtrMplsLspTempAutoBWTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 46 } vRtrMplsLspTempAutoBWTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspTempAutoBWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspTempAutoBWTable has an entry for auto bandwidth configuration for each Labeled Switch Path (LSP) template configured for a virtual router in the system." ::= { tmnxMplsObjs 47 } vRtrMplsLspTempAutoBWEntry OBJECT-TYPE SYNTAX VRtrMplsLspTempAutoBWEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents auto bandwidth configuration for a Labeled Switch Path (LSP) Template configured for a virtual router in the system." INDEX { vRtrID, vRtrMplsLspTemplateName } ::= { vRtrMplsLspTempAutoBWTable 1 } VRtrMplsLspTempAutoBWEntry ::= SEQUENCE { vRtrMplsLspTempAutoBWLastChg TimeStamp, vRtrMplsLspTempAutoBWAdjDNPer Unsigned32, vRtrMplsLspTempAutoBWAdjDNMbps Unsigned32, vRtrMplsLspTempAutoBWAdjUPPer Unsigned32, vRtrMplsLspTempAutoBWAdjUPMbps Unsigned32, vRtrMplsLspTempAutoBWMaxBW Unsigned32, vRtrMplsLspTempAutoBWMinBW Unsigned32, vRtrMplsLspTempAutoBWMntrBW TruthValue, vRtrMplsLspTempAutoBWAdjMult Unsigned32, vRtrMplsLspTempAutoBWOverFlow Unsigned32, vRtrMplsLspTempAutoBWOvrFlwThr Unsigned32, vRtrMplsLspTempAutoBWOvrFlwBW Unsigned32, vRtrMplsLspTempAutoBWSampMult Unsigned32, vRtrMplsLspTempAutoBWSampTime Unsigned32, vRtrMplsLspTempAutoBWInherit Unsigned32, vRtrMplsLspTempAutoBWBeWeight Unsigned32, vRtrMplsLspTempAutoBWL2Weight Unsigned32, vRtrMplsLspTempAutoBWAfWeight Unsigned32, vRtrMplsLspTempAutoBWL1Weight Unsigned32, vRtrMplsLspTempAutoBWH2Weight Unsigned32, vRtrMplsLspTempAutoBWEfWeight Unsigned32, vRtrMplsLspTempAutoBWH1Weight Unsigned32, vRtrMplsLspTempAutoBWNcWeight Unsigned32, vRtrMplsLspTempAutoBWUnderFlow Unsigned32, vRtrMplsLspTempAutoBWUndFlwThr Unsigned32, vRtrMplsLspTempAutoBWUndFlwBW Unsigned32 } vRtrMplsLspTempAutoBWLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWLastChg indicates the sysUpTime when this row was last modified." ::= { vRtrMplsLspTempAutoBWEntry 1 } vRtrMplsLspTempAutoBWAdjDNPer OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWAdjDNPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for decreasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth falls below the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjDNPer it can cause a re-signaling attempt for the LSP template. A value of zero for this object indicates that the threshold check is always true for any measured bandwidth less than current bandwidth." DEFVAL { 5 } ::= { vRtrMplsLspTempAutoBWEntry 2 } vRtrMplsLspTempAutoBWAdjDNMbps OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWAdjDNMbps specifies the minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as an absolute bandwidth (Mbps), for decreasing the bandwidth of the LSP template." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 3 } vRtrMplsLspTempAutoBWAdjUPPer OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as a percentage of the current bandwidth, for increasing the bandwidth of the LSP template. At the adjust interval expiry, if the measured bandwidth exceeds the current bandwidth by the value of vRtrMplsLspTempAutoBWAdjUPPer it can cause a re-signaling attempt for the LSP template. When the value of vRtrMplsLspTempAutoBWAdjUPPer is 0 it means that this threshold check is always true for any measured bandwidth greater than current bandwidth" DEFVAL { 5 } ::= { vRtrMplsLspTempAutoBWEntry 4 } vRtrMplsLspTempAutoBWAdjUPMbps OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWAdjUPMbps specifies the minimum difference between the current bandwidth reservation of the LSP template and the (measured) maximum average data rate, expressed as an absolute bandwidth (Mbps), for increasing the bandwidth of the LSP template." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 5 } vRtrMplsLspTempAutoBWMaxBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWMaxBW specifies the maximum that auto-bandwidth allocation is allowed to request for a LSP template." DEFVAL { 100000 } ::= { vRtrMplsLspTempAutoBWEntry 6 } vRtrMplsLspTempAutoBWMinBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWMinBW specifies the minimum that auto-bandwidth allocation is allowed to request for a LSP template." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 7 } vRtrMplsLspTempAutoBWMntrBW OBJECT-TYPE SYNTAX TruthValue UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWMntrBW specifies whether the collection and display of auto-bandwidth measurements is enabled or disabled for the LSP template. When the value of vRtrMplsLspTempAutoBWMntrBW is 'true' the collection and display of auto-bandwidth measurements is enabled and when the value is 'false' it is disabled." DEFVAL { false } ::= { vRtrMplsLspTempAutoBWEntry 8 } vRtrMplsLspTempAutoBWAdjMult OBJECT-TYPE SYNTAX Unsigned32 (1..16383) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWAdjMult specifies the number of collection intervals in the adjust interval. The default value is derived from vRtrMplsGeneralAutoBWDefAdjMul and vRtrMplsLspAutoBWAdjCount." DEFVAL { 288 } ::= { vRtrMplsLspTempAutoBWEntry 9 } vRtrMplsLspTempAutoBWOverFlow OBJECT-TYPE SYNTAX Unsigned32 (0|1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWOverFlow specifies number of overflow samples that triggers an overflow auto-bandwidth adjustment attempt." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 10 } vRtrMplsLspTempAutoBWOvrFlwThr OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWOvrFlwThr specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as a percentage of the current bandwidth, for counting an overflow sample." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 11 } vRtrMplsLspTempAutoBWOvrFlwBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWOvrFlwBW specifies the minimum difference between the current bandwidth of the LSP template and the sampled data rate, expressed as an absolute bandwidth (Mbps), for counting an overflow sample." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 12 } vRtrMplsLspTempAutoBWSampMult OBJECT-TYPE SYNTAX Unsigned32 (1..511) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWSampMult specifies the multiplier for collection intervals in a sample interval." DEFVAL { 1 } ::= { vRtrMplsLspTempAutoBWEntry 13 } vRtrMplsLspTempAutoBWSampTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWSampTime indicates the sample multiplier times the collection interval." ::= { vRtrMplsLspTempAutoBWEntry 14 } vRtrMplsLspTempAutoBWInherit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrMplsGeneralTable, there is bit within vRtrMplsLspTempAutoBWInherit that controls whether to inherit the operational value of the object or use the administratively set value. This object is a bit-mask, with the following positions: vRtrMplsLspTempAutoBWAdjMult 0x1 vRtrMplsLspTempAutoBWSampMult 0x2 When the bit for an object is set to one, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is. When the bit for an object is set to zero, then the object's administrative and operational value are inherited from the corresponding object in vRtrMplsGeneralTable." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 15 } vRtrMplsLspTempAutoBWBeWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWBeWeight specifies the weight in percent for forwarding class 'BE' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 16 } vRtrMplsLspTempAutoBWL2Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWL2Weight specifies the weight in percent for forwarding class 'L2' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 17 } vRtrMplsLspTempAutoBWAfWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWAfWeight specifies the weight in percent for forwarding class 'AF' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 18 } vRtrMplsLspTempAutoBWL1Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWL1Weight specifies the weight in percent for forwarding class 'L1' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 19 } vRtrMplsLspTempAutoBWH2Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWH2Weight specifies the weight in percent for forwarding class 'H2' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 20 } vRtrMplsLspTempAutoBWEfWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWEfWeight specifies the weight in percent for forwarding class 'EF' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 21 } vRtrMplsLspTempAutoBWH1Weight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWH1Weight specifies the weight in percent for forwarding class 'H1' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 22 } vRtrMplsLspTempAutoBWNcWeight OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWNcWeight specifies the weight in percent for forwarding class 'NC' for the LSP template." DEFVAL { 100 } ::= { vRtrMplsLspTempAutoBWEntry 23 } vRtrMplsLspTempAutoBWUnderFlow OBJECT-TYPE SYNTAX Unsigned32 (0|1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWUnderFlow specifies the number of underflow samples that trigger an underflow auto-bandwidth adjustment attempt." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 24 } vRtrMplsLspTempAutoBWUndFlwThr OBJECT-TYPE SYNTAX Unsigned32 (0|1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWUndFlwThr specifies the minimum difference between the current bandwidth of the LSP and the sampled data rate, expressed as a percentage of the current bandwidth, for counting an underflow sample." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 25 } vRtrMplsLspTempAutoBWUndFlwBW OBJECT-TYPE SYNTAX Unsigned32 (0..100000) UNITS "Mbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrMplsLspTempAutoBWUndFlwBW specifies the minimum difference between the current bandwidth of the LSP template and the sampled data rate, expressed as an absolute bandwidth (Mbps), for counting an underflow sample." DEFVAL { 0 } ::= { vRtrMplsLspTempAutoBWEntry 26 } -- -- The Virtual Router MPLS Labeled Switch Path (LSP) Template Policy Bind Table -- vRtrMplsTemplPlcyBindTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTemplPlcyBindTblLastChg indicates the sysUpTime at the time of the last modification to vRtrMplsLspTemplPlcyBindTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxMplsObjs 48 } vRtrMplsLspTemplPlcyBindTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspTemplPlcyBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspTemplPlcyBindTable has an entry for each policy bound to each Labeled Switch Path (LSP) template configured for a virtual router in the system." ::= { tmnxMplsObjs 49 } vRtrMplsLspTemplPlcyBindEntry OBJECT-TYPE SYNTAX VRtrMplsLspTemplPlcyBindEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a policy bound to a Labeled Switch Path (LSP) Template configured for a virtual router in the system." INDEX { vRtrID, vRtrMplsLspTemplateName } ::= { vRtrMplsLspTemplPlcyBindTable 1 } VRtrMplsLspTemplPlcyBindEntry ::= SEQUENCE { vRtrMplsLspTemplPlcyBindLastChg TimeStamp, vRtrMplsLspTemplPlcyBindRowStat RowStatus, vRtrMplsLspTemplPlcyBind1 TPolicyStatementNameOrEmpty, vRtrMplsLspTemplPlcyBind2 TPolicyStatementNameOrEmpty, vRtrMplsLspTemplPlcyBind3 TPolicyStatementNameOrEmpty, vRtrMplsLspTemplPlcyBind4 TPolicyStatementNameOrEmpty, vRtrMplsLspTemplPlcyBind5 TPolicyStatementNameOrEmpty, vRtrMplsLspTemplPlcyBindOneHop TruthValue } vRtrMplsLspTemplPlcyBindLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrMplsLspTemplPlcyBindLastChg indicates the value of the sysUpTime when this entry was last modified." ::= { vRtrMplsLspTemplPlcyBindEntry 1 } vRtrMplsLspTemplPlcyBindRowStat OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrMplsLspTemplPlcyBindRowStat specifies the RowStatus for Policy bound entry." ::= { vRtrMplsLspTemplPlcyBindEntry 2 } vRtrMplsLspTemplPlcyBind1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplPlcyBind1 specifies the name of the first mpls lsp template policy. This object will be set to its default value when vRtrMplsLspTemplPlcyBindOneHop is set to true." DEFVAL { ''H } -- the empty string ::= { vRtrMplsLspTemplPlcyBindEntry 3 } vRtrMplsLspTemplPlcyBind2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplPlcyBind2 specifies the name of the second mpls lsp template policy. This object will be set to its default value when vRtrMplsLspTemplPlcyBindOneHop is set to true." DEFVAL { ''H } -- the empty string ::= { vRtrMplsLspTemplPlcyBindEntry 4 } vRtrMplsLspTemplPlcyBind3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplPlcyBind3 specifies the name of the third mpls lsp template policy. This object will be set to its default value when vRtrMplsLspTemplPlcyBindOneHop is set to true." DEFVAL { ''H } -- the empty string ::= { vRtrMplsLspTemplPlcyBindEntry 5 } vRtrMplsLspTemplPlcyBind4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplPlcyBind4 specifies the name of the fourth mpls lsp template policy. This object will be set to its default value when vRtrMplsLspTemplPlcyBindOneHop is set to true." DEFVAL { ''H } -- the empty string ::= { vRtrMplsLspTemplPlcyBindEntry 6 } vRtrMplsLspTemplPlcyBind5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplPlcyBind5 specifies the name of the fifth mpls lsp template policy. This object will be set to its default value when vRtrMplsLspTemplPlcyBindOneHop is set to true." DEFVAL { ''H } -- the empty string ::= { vRtrMplsLspTemplPlcyBindEntry 7 } vRtrMplsLspTemplPlcyBindOneHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTemplPlcyBindOneHop specifies whether the one-hop-p2p has been enabled for auto-lsp or not. This object will be set to false when any one of the policy for mpls lsp-template is set to its non-default value." DEFVAL { false } ::= { vRtrMplsLspTemplPlcyBindEntry 8 } -- -- The MPLS Ingress Statistics table for Template Based Label Switched Path -- (LSP) -- vRtrMplsLspTempInStatTblLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last change to the vRtrMplsLspTempInStatTblLstChg either from adding a row or removing a row." ::= { tmnxMplsObjs 50 } vRtrMplsLspTempInStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspTempInStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsLspTempInStatTable controls Ingress Statistics for Template based Label Switched Path (LSP)." ::= { tmnxMplsObjs 51 } vRtrMplsLspTempInStatEntry OBJECT-TYPE SYNTAX VRtrMplsLspTempInStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table represents information about the ingress statistics collection for Template based LSP." INDEX { vRtrID, vRtrMplsLspTempInStatType, vRtrMplsLspTempInStatSndrAddrTyp, vRtrMplsLspTempInStatSndrAddr, vRtrMplsLspTempInStatLspNamePref } ::= { vRtrMplsLspTempInStatTable 1 } VRtrMplsLspTempInStatEntry ::= SEQUENCE { vRtrMplsLspTempInStatType INTEGER, vRtrMplsLspTempInStatSndrAddrTyp InetAddressType, vRtrMplsLspTempInStatSndrAddr InetAddress, vRtrMplsLspTempInStatLspNamePref TLNamedItem, vRtrMplsLspTempInStatRowStatus RowStatus, vRtrMplsLspTempInStatLastChanged TimeStamp, vRtrMplsLspTempInStatCollectStat TruthValue, vRtrMplsLspTempInStatAccntPolicy Unsigned32, vRtrMplsLspTempInStatAdminState TmnxAdminState, vRtrMplsLspTempInStatMaxStats Unsigned32, vRtrMplsLspTempInStatTotlSession Unsigned32 } vRtrMplsLspTempInStatType OBJECT-TYPE SYNTAX INTEGER { unknown (0), p2p (1), p2mp (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatType indicates the type of template based Label Switched Path (LSP)." ::= { vRtrMplsLspTempInStatEntry 1 } vRtrMplsLspTempInStatSndrAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatSndrAddrTyp indicates address type of vRtrMplsLspTempInStatSndrAddr." ::= { vRtrMplsLspTempInStatEntry 2 } vRtrMplsLspTempInStatSndrAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatSndrAddr indicates the sender address." ::= { vRtrMplsLspTempInStatEntry 3 } vRtrMplsLspTempInStatLspNamePref OBJECT-TYPE SYNTAX TLNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatLspNamePref indicates the prefix against which to match the LSP name." ::= { vRtrMplsLspTempInStatEntry 4 } vRtrMplsLspTempInStatRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrMplsLspTempInStatRowStatus is used for the creation or deletion of entries in the vRtrMplsLspTempInStatTable." ::= { vRtrMplsLspTempInStatEntry 5 } vRtrMplsLspTempInStatLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatLastChanged indicates the time stamp of the last change to this row of this table." ::= { vRtrMplsLspTempInStatEntry 6 } vRtrMplsLspTempInStatCollectStat OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatCollectStat specifies whether to collect statistics for this prefix." DEFVAL { false } ::= { vRtrMplsLspTempInStatEntry 7 } vRtrMplsLspTempInStatAccntPolicy OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..99) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatAccntPolicy specifies the accounting policy to be used for this entry. A value of zero indicates that the default accounting policy should be used." DEFVAL { 0 } ::= { vRtrMplsLspTempInStatEntry 8 } vRtrMplsLspTempInStatAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatAdminState specifies whether ingress statistics is enabled for this Label Switched Path (LSP) template." DEFVAL { outOfService } ::= { vRtrMplsLspTempInStatEntry 9 } vRtrMplsLspTempInStatMaxStats OBJECT-TYPE SYNTAX Unsigned32 (1..8191) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatMaxStats specifies the maximum number of stat indices assigned to this Label Switched Path (LSP) template session." DEFVAL { 8191 } ::= { vRtrMplsLspTempInStatEntry 10 } vRtrMplsLspTempInStatTotlSession OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspTempInStatTotlSession indicates the total number of sessions associated with this Label Switched Path (LSP) template statistics." ::= { vRtrMplsLspTempInStatEntry 11 } -- -- -- The Virtual Router MPLS Labeled Switch Path (LSP) Extension Table -- -- Augmentation of the vRtrMplsLspTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrMplsLspTable, and the augmenting table, -- vRtrMplsLspStatTable. This in effect extends the vRtrMplsLspTable -- with additional columns. -- Creation (or deletion) of a row in the vRtrMplsLspTable results in -- the same fate for the row in the vRtrMplsLspExtTable. -- vRtrMplsLspExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system. This table augments the vRtrMplsLspTable." ::= { tmnxMplsObjs 52 } vRtrMplsLspExtEntry OBJECT-TYPE SYNTAX VRtrMplsLspExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Each row entry represents a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries can be created and deleted via SNMP SET operations using the vRtrMplsLspRowStatus variable." AUGMENTS { vRtrMplsLspEntry } ::= { vRtrMplsLspExtTable 1 } VRtrMplsLspExtEntry ::= SEQUENCE { vRtrMplsLspExtPceCompute TruthValue, vRtrMplsLspExtPceControl TruthValue, vRtrMplsLspExtPceReport INTEGER, vRtrMplsLspExtTtmTunnelId Unsigned32, vRtrMplsLspExtMaxSrLabels Unsigned32, vRtrMplsLspExtTunnelId Unsigned32, vRtrMplsLspExtEntropyLabel INTEGER, vRtrMplsLspExtOperEntropyLabel INTEGER, vRtrMplsLspExtFrrOverheadLabel Unsigned32, vRtrMplsLspExtNegEntropyLbl INTEGER } vRtrMplsLspExtPceCompute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspExtPceCompute specifies whether the LSP path computation request is sent to local CSPF or to PCE. When the value of this object is 'true', the LSP makes a request to PCE to compute the path. When the value of this object is 'false', the path for this LSP is computed locally using CSPF." DEFVAL { false } ::= { vRtrMplsLspExtEntry 1 } vRtrMplsLspExtPceControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspExtPceControl specifies whether the control of path (delegation) to Path Computation Engine (PCE). Path delegation can be done on locally computed paths and paths computed using PCE." DEFVAL { false } ::= { vRtrMplsLspExtEntry 2 } vRtrMplsLspExtPceReport OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2), inherit (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspExtPceReport specifies whether to override the global configuration of reporting of LSP to PCE. If the value of vRtrMplsLspExtPceReport is 'disabled' for an LSP either due to inheritance or due to LSP level configuration, the value of vRtrMplsLspExtPceControl has no affect. The default value for vRtrMplsLspExtPceReport is 'inherit'." DEFVAL { inherit } ::= { vRtrMplsLspExtEntry 3} vRtrMplsLspExtTtmTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspExtTtmTunnelId indicates the tunnel id sent to TTM for Segment Routing Tunnels on this SROS system." ::= { vRtrMplsLspExtEntry 4 } vRtrMplsLspExtMaxSrLabels OBJECT-TYPE SYNTAX Unsigned32 (1..11) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspExtMaxSrLabels specifies maximum segment routing label stack size for this LSP." DEFVAL { 6 } ::= { vRtrMplsLspExtEntry 5 } vRtrMplsLspExtTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspExtTunnelId indicates the tunnel id used to uniquely identify tunnels on this SROS system." ::= { vRtrMplsLspExtEntry 6 } vRtrMplsLspExtEntropyLabel OBJECT-TYPE SYNTAX INTEGER { forceDisable(1), enable (2), inherit (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspExtEntropyLabel specifies whether the application takes into account the value of Entropy Label and Entropy Label Capability in the label stack for this LSP. When the value of vRtrMplsLspExtEntropyLabel is set to 'enable', the application will account for EL/ELC in the label stack without taking into consideration the value of the enabled ELC. When the value of vRtrMplsLspExtEntropyLabel is set to 'force-disable', the application will ignore the value of enabled ELC. When the value of vRtrMplsLspExtEntropyLabel is modified, Entropy Label will become operational when this LSP is re-signaled. By default, this LSP will inherit the behavior as set by vRtrMplsGeneralEntropyLblRsvpTe." DEFVAL { inherit } ::= { vRtrMplsLspExtEntry 7 } vRtrMplsLspExtOperEntropyLabel OBJECT-TYPE SYNTAX INTEGER { forceDisable (1), enable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspExtOperEntropyLabel indicates the operational value of Entropy Label for this LSP. When the value of vRtrMplsLspExtOperEntropyLabel is modified, Entropy Label will become operational when this LSP is re-signaled. By default, this LSP will have Entropy Label set to 'force-disable'." ::= { vRtrMplsLspExtEntry 8 } vRtrMplsLspExtFrrOverheadLabel OBJECT-TYPE SYNTAX Unsigned32 (0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspExtFrrOverheadLabel specifies maximum additional overhead labels for this LSP." DEFVAL { 1 } ::= { vRtrMplsLspExtEntry 9 } vRtrMplsLspExtNegEntropyLbl OBJECT-TYPE SYNTAX INTEGER { forceDisable (1), enable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsLspExtNegEntropyLbl indicates the combination of Entropy Label configured at head end for this LSP and the Entropy Label Capability signalled from the far end." ::= { vRtrMplsLspExtEntry 10 } -- -- The Virtual Router MPLS Labeled Switch Path (LSP) Path Profile Table -- vRtrMplsLspPathProfTblLstChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last change to the vRtrMplsLspPathProfTblLstChg either from adding a row or removing a row." ::= { tmnxMplsObjs 53 } vRtrMplsLspPathProfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsLspPathProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsLspPathProfTable has an entry for each Labeled Switch Path (LSP) configured for a virtual router in the system." ::= { tmnxMplsObjs 54 } vRtrMplsLspPathProfEntry OBJECT-TYPE SYNTAX VRtrMplsLspPathProfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Labeled Switch Path (LSP) configured for a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires vRtrMplsLspPathProfId to have been assigned a valid value." INDEX { vRtrID, vRtrMplsLspIndex, vRtrMplsLspPathProfId } ::= { vRtrMplsLspPathProfTable 1 } VRtrMplsLspPathProfEntry ::= SEQUENCE { vRtrMplsLspPathProfId Unsigned32, vRtrMplsLspPathProfRowStatus RowStatus, vRtrMplsLspPathProfLastChange TimeStamp, vRtrMplsLspPathProfGroupId Unsigned32 } vRtrMplsLspPathProfId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsLspPathProfId specifies the profile id of for the specified LSP." DEFVAL {0} ::= { vRtrMplsLspPathProfEntry 1 } vRtrMplsLspPathProfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation, deletion, or control of vRtrMplsLspPathProfTable entries. Before the row can be placed into the 'active' state vRtrMplsLspName must have been assigned a valid value." ::= { vRtrMplsLspPathProfEntry 2 } vRtrMplsLspPathProfLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUpTime when this row was last modified." ::= { vRtrMplsLspPathProfEntry 3 } vRtrMplsLspPathProfGroupId OBJECT-TYPE SYNTAX Unsigned32 (0|1..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsLspPathProfGroupId specifies the group id used by the path profile for the specified LSP." DEFVAL {0} ::= { vRtrMplsLspPathProfEntry 4 } -- -- -- Notification Information -- tmnxMplsNotificationObjects OBJECT IDENTIFIER ::= { tmnxMplsObjs 16 } -- Trap control objects -- vRtrMplsLspNotificationReasonCode OBJECT-TYPE SYNTAX INTEGER { noError(0), noPathIsOperational(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used by vRtrMplsLspDown, the value indicates the reason for the LSP going down." ::= { tmnxMplsNotificationObjects 1 } vRtrMplsLspPathNotificationReasonCode OBJECT-TYPE SYNTAX TmnxMplsLspFailCode MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used by vRtrMplsLspPathDown, the value indicates the reason for the LSP path going down." ::= { tmnxMplsNotificationObjects 2 } vRtrMplsNotifyRow OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "used by Nokia SROS series MPLS Configuration change Notifications, the object ID indicates the MPLS table and entry." ::= { tmnxMplsNotificationObjects 3 } vRtrMplsP2mpInstNotifIndex OBJECT-TYPE SYNTAX TmnxVRtrMplsLspID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value which identifies this Point to Multipoint Labeled Switch Path (P2MP LSP) for this virtual router in the Nokia SROS system. It is a unique value among entries with the same value of vRtrID." ::= { tmnxMplsNotificationObjects 4 } vRtrMplsP2mpInstNotifReasonCode OBJECT-TYPE SYNTAX TmnxMplsP2mpInstFailCode MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used by vRtrMplsP2mpInstanceDown, the value indicates the reason for the P2MP instance going down." ::= { tmnxMplsNotificationObjects 5 } vRtrMplsS2lSubLspNtDstAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspNtDstAddrType indicates the type of vRtrMplsS2lSubLspNtDstAddr." ::= { tmnxMplsNotificationObjects 6 } vRtrMplsS2lSubLspNtDstAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsS2lSubLspNtDstAddr indicates the IP address of the destination address of the S2L sub LSP. " ::= { tmnxMplsNotificationObjects 7 } vRtrMplsLspPathCongChgPercent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsLspPathCongChgPercent indicates the percentage change in congestion. " ::= { tmnxMplsNotificationObjects 8 } vRtrMplsLspPathMbbStatus OBJECT-TYPE SYNTAX INTEGER { successful (0), failed (1), aborted (2), ignored (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsLspPathMbbStatus indicates the status of the make-before-break (MBB) operation for the LSP path." ::= { tmnxMplsNotificationObjects 9 } vRtrMplsLspPathMbbReasonCode OBJECT-TYPE SYNTAX INTEGER { none (0), mbbRetryExceeded (1), lspPathGoingDown (2), startingHighPriMbb (3), restartingMbb (4), mbbAlreadyInProg (5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsLspPathMbbReasonCode indicates the reason code for the make-before-break (MBB) operation of the LSP path. It indicates whether the operation is failed, aborted or ignored." ::= { tmnxMplsNotificationObjects 10 } vRtrMplsLspSwitchStbyReasonCode OBJECT-TYPE SYNTAX INTEGER { none (0), lspIsDown (1), lspIsNotDynamic (2), lspHasNoActivePath (3), lspActivePathIsNotStandby (4), pathSpecifiedIsNotLspPath (5), pathSpecifiedIsNotStandby (6), pathSpecifiedIsDown (7), pathHasDiffPrefThanActLspPath (8), lspHoldTimerIsRunning (9), currentLspPathActiveByForce (10), lspPathInPreemption (11), lspActivePathIsPrimary (12), currentActivePathIsBest (13), betterPathFound (14), currentActivePathWentDown (15) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsLspSwitchStbyReasonCode indicates the reason for the failure of switch to a new standby path from the current active standby path." ::= { tmnxMplsNotificationObjects 13 } vRtrMplsLspOldTunnelIndex OBJECT-TYPE SYNTAX MplsTunnelIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsLspOldTunnelIndex indicates the tunnel index of of the old LSP path." ::= { tmnxMplsNotificationObjects 14 } vRtrMplsXCNotifRednIndicesBitMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..1000)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsXCNotifRednIndicesBitMap indicates the RSVP sessions that either changed state and retained the changed state for the entire quiet interval of 2 minutes or the RSVP sessions that changed state during multiple intervals until a maximum interval of 10 minutes has elapsed. Each bit location in vRtrMplsXCNotifRednIndicesBitMap corresponds to a created or deleted row entry in vRtrMplsXCTable as identified by the value of vRtrMplsXCIndex. This index is same as the value of TIMETRA-RSVP-MIB::vRtrRsvpSessionIndex which corresponds to a created or deleted RSVP session entry in TIMETRA-RSVP-MIB::vRtrRsvpSessionTable. The value of vRtrMplsXCNotifyRednStartIndex indicates the index value of the first affected row entry represented by bit 0, the most significant bit. If the value of vRtrMplsXCNotifyRednBundlingType is set to 'create (2)', all the bits set in vRtrMplsXCNotifRednIndicesBitMap represent created RSVP sessions. If the value of vRtrMplsXCNotifyRednBundlingType is set to 'delete (1)', all the bits set in vRtrMplsXCNotifRednIndicesBitMap represent deleted RSVP sessions." ::= { tmnxMplsNotificationObjects 15} vRtrMplsXCNotifyRednBundlingType OBJECT-TYPE SYNTAX INTEGER { delete (1), create (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsXCNotifyRednBundlingType indicates whether this notification is generated for deletion or creation of RSVP sessions on this ingress, transit or egress router instance." ::= { tmnxMplsNotificationObjects 16 } vRtrMplsXCNotifyRednNumOfBitsSet OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsXCNotifyRednNumOfBitsSet indicates the total number of bits set in vRtrMplsXCNotifRednIndicesBitMap." ::= { tmnxMplsNotificationObjects 17 } vRtrMplsXCNotifyRednStartIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsXCNotifyRednStartIndex indicates which vRtrMplsXCIndex is represented by the first bit in vRtrMplsXCNotifRednIndicesBitMap." ::= { tmnxMplsNotificationObjects 18 } vRtrMplsXCNotifyRednEndIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsXCNotifyRednEndIndex indicates which vRtrMplsXCIndex is represented by the last bit in vRtrMplsXCNotifRednIndicesBitMap. The value vRtrMplsXCNotifyRednEndIndex can be useful for a sanity check of vRtrMplsXCNotifyRednNumOfBitsSet. vRtrMplsXCNotifyRednNumOfBitsSet. = (vRtrMplsXCNotifyRednEndIndex - vRtrMplsXCNotifyRednStartIndex + 1)." ::= { tmnxMplsNotificationObjects 19 } vRtrMplsIgpOverloadRtrAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsIgpOverloadRtrAddrType indicates the address type of vRtrMplsIgpOverloadRtrAddr." ::= { tmnxMplsNotificationObjects 20 } vRtrMplsIgpOverloadRtrAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsIgpOverloadRtrAddr indicates the IP address of the router that is in IGP overload state." ::= { tmnxMplsNotificationObjects 21 } vRtrMplsIgpOverloadIgpType OBJECT-TYPE SYNTAX INTEGER { isis (1), ospf (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsIgpOverloadIgpType indicates IGP which is notifying MPLS that a node is in the overload state." ::= { tmnxMplsNotificationObjects 22 } -- -- Notification Definitions -- vRtrMplsStateChange NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsGeneralAdminState, vRtrMplsGeneralOperState } STATUS current DESCRIPTION "This Notification is generated when the MPLS module changes state" ::= { tmnxMplsNotifications 1 } vRtrMplsIfStateChange NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrIfIndex, vRtrMplsIfAdminState, vRtrMplsIfOperState } STATUS current DESCRIPTION "This Notification is generated when the MPLS interface changes state" ::= { tmnxMplsNotifications 2 } vRtrMplsLspUp NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsLspAdminState, vRtrMplsLspOperState } STATUS current DESCRIPTION "This Notification is generated when a LSP transitions to the 'inService' state from any other state." ::= { tmnxMplsNotifications 3 } vRtrMplsLspDown NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsLspAdminState, vRtrMplsLspOperState, vRtrMplsLspNotificationReasonCode } STATUS current DESCRIPTION "This Notification is generated when an LSP transitions out of 'inService' state to any other state." ::= { tmnxMplsNotifications 4 } vRtrMplsLspPathUp NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState } STATUS current DESCRIPTION "This Notification is generated when a LSP Path transitions to the 'inService' state from any other state." ::= { tmnxMplsNotifications 5 } vRtrMplsLspPathDown NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState, vRtrMplsLspPathNotificationReasonCode} STATUS current DESCRIPTION "This Notification is generated when a LSP Path transitions out of 'inService' state to any other state." ::= { tmnxMplsNotifications 6 } vRtrMplsLspPathRerouted NOTIFICATION-TYPE OBJECTS { vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState } STATUS current DESCRIPTION "The vRtrMplsLspPathRerouted notification is generated when an LSP Path is rerouted." ::= { tmnxMplsNotifications 7 } vRtrMplsLspPathResignaled NOTIFICATION-TYPE OBJECTS { vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState, vRtrMplsLspPathLastMBBType } STATUS current DESCRIPTION "The vRtrMplsLspPathResignaled notification is generated when an LSP Path is resignaled. The vRtrMplsLspPathLastMBBType indicates the reason why the LSP Path was resignaled." ::= { tmnxMplsNotifications 8 } vRtrMplsP2mpInstanceUp NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsP2mpInstNotifIndex, vRtrMplsP2mpInstAdminState, vRtrMplsP2mpInstOperState } STATUS current DESCRIPTION "This Notification is generated when a P2MP instance transitions to the 'inService' state from any other state." ::= { tmnxMplsNotifications 9 } vRtrMplsP2mpInstanceDown NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsP2mpInstNotifIndex, vRtrMplsP2mpInstAdminState, vRtrMplsP2mpInstOperState, vRtrMplsP2mpInstNotifReasonCode } STATUS current DESCRIPTION "This Notification is generated when a P2MP instance transitions out of 'inService' state to any other state." ::= { tmnxMplsNotifications 10 } vRtrMplsS2lSubLspUp NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsP2mpInstNotifIndex, mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, vRtrMplsS2lSubLspNtDstAddrType, vRtrMplsS2lSubLspNtDstAddr, vRtrMplsS2lSubLspAdminState, vRtrMplsS2lSubLspOperState } STATUS current DESCRIPTION "This Notification is generated when a S2l sub LSP transitions to the 'inService' state from any other state." ::= { tmnxMplsNotifications 11 } vRtrMplsS2lSubLspDown NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsP2mpInstNotifIndex, mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, vRtrMplsS2lSubLspNtDstAddrType, vRtrMplsS2lSubLspNtDstAddr, vRtrMplsS2lSubLspAdminState, vRtrMplsS2lSubLspOperState, vRtrMplsP2mpInstNotifReasonCode } STATUS current DESCRIPTION "This Notification is generated when a S2l sub LSP transitions out of 'inService' state to any other state." ::= { tmnxMplsNotifications 12 } vRtrMplsS2lSubLspRerouted NOTIFICATION-TYPE OBJECTS { vRtrMplsS2lSubLspAdminState, vRtrMplsS2lSubLspOperState } STATUS current DESCRIPTION "The vRtrMplsS2lSubLspRerouted notification is generated when an S2l sub LSP is rerouted." ::= { tmnxMplsNotifications 13 } vRtrMplsS2lSubLspResignaled NOTIFICATION-TYPE OBJECTS { vRtrMplsS2lSubLspAdminState, vRtrMplsS2lSubLspOperState, vRtrMplsS2lSubLspLastMBBType } STATUS current DESCRIPTION "The vRtrMplsS2lSubLspResignaled notification is generated when an S2l sub LSP is resignaled. The vRtrMplsS2lSubLspLastMBBType indicates the reason why the S2l sub LSP was resignaled." ::= { tmnxMplsNotifications 14 } vRtrMplsLspPathSoftPreempted NOTIFICATION-TYPE OBJECTS { vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState } STATUS current DESCRIPTION "The vRtrMplsLspPathSoftPreempted notification is generated when an LSP Path is soft-preempted." ::= { tmnxMplsNotifications 15 } vRtrMplsLspPathLstFillReoptElig NOTIFICATION-TYPE OBJECTS { vRtrMplsLspPathResignalEligible, vRtrMplsLspPathCongChgPercent } STATUS current DESCRIPTION "The vRtrMplsLspPathLstFillReoptElig notification is set/reset based on when a timer based re-signal found/did not find a path with the same cost but which has a better least-fill metric." ::= { tmnxMplsNotifications 16 } vRtrMplsP2mpInstanceResignaled NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsP2mpInstNotifIndex, vRtrMplsP2mpInstAdminState, vRtrMplsP2mpInstOperState, vRtrMplsP2mpInstLastMBBType } STATUS current DESCRIPTION "This Notification is generated when a P2MP instance is resignaled. The vRtrMplsP2mpInstLastMBBType indicates the reason why the P2MP instance was resignaled." ::= { tmnxMplsNotifications 17 } vRtrMplsResignalTimerExpired NOTIFICATION-TYPE OBJECTS { vRtrMplsGeneralResignalTimer } STATUS current DESCRIPTION "The vRtrMplsResignalTimerExpired notification is generated when the resignal timer expires for a MPLS instance. Make before break (MBB) would be started only on those P2P LSP (Point to Point) paths that need to be resignaled. vRtrMplsGeneralResignalTimer would be reset once this notification is sent." ::= { tmnxMplsNotifications 18 } vRtrMplsLspPathMbbStatusEvent NOTIFICATION-TYPE OBJECTS { vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState, vRtrMplsLspPathLastMBBType, vRtrMplsLspPathMbbStatus, vRtrMplsLspPathMbbReasonCode } STATUS current DESCRIPTION "The vRtrMplsLspPathMbbStatusEvent notification is generated to report the status of the make-before-break(MBB) operation for the LSP path." ::= { tmnxMplsNotifications 19 } vRtrMplsLspSwitchStbyFailure NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrMplsLspIndex, vRtrMplsLspAdminState, vRtrMplsLspOperState, vRtrMplsLspSwitchStbyPathForce, vRtrMplsLspSwitchStbyPathIndex, vRtrMplsLspSwitchStbyReasonCode } STATUS current DESCRIPTION "[CAUSE] The vRtrMplsLspSwitchStbyFailure notification is generated to report an unsuccessful switchover from the current active secondary LSP path of an LSP to another secondary standby LSP path. The reason for the failure is specified by vRtrMplsLspSwitchStbyReasonCode. [EFFECT] The switchover to the new standby path failed for the LSP. [RECOVERY] The vRtrMplsLspSwitchStbyReasonCode will help the user troubleshoot the failure. The user can attempt to switchover to another standby LSP path again." ::= { tmnxMplsNotifications 20 } vRtrMplsLspActivePathChanged NOTIFICATION-TYPE OBJECTS { vRtrMplsLspPathState, vRtrMplsLspPathActiveByManual, vRtrMplsLspOldTunnelIndex} STATUS current DESCRIPTION "[CAUSE] The vRtrMplsLspActivePathChanged notification is generated when the active path of an LSP successfully switches to an new path. This notification will also be sent when the active LSP path does not change but only the switch method changes on the path. The old LSP path index is specified by vRtrMplsLspOldTunnelIndex. The state and switch method of the current active LSP path are specified by vRtrMplsLspPathState and vRtrMplsLspPathActiveByManual respectively. [EFFECT] The switchover to the new LSP path was successful and/or the switch method of the current active LSP path changed. [RECOVERY] There is no recovery required for this notification." ::= { tmnxMplsNotifications 21 } vRtrMplsXCBundleChange NOTIFICATION-TYPE OBJECTS {vRtrID, vRtrMplsXCNotifRednIndicesBitMap, vRtrMplsXCNotifyRednBundlingType, vRtrMplsXCNotifyRednNumOfBitsSet, vRtrMplsXCNotifyRednStartIndex, vRtrMplsXCNotifyRednEndIndex} STATUS current DESCRIPTION "[CAUSE] vRtrMplsXCBundleChange is generated when one or more RSVP sessions changed state and retained the changed state for an entire quiet interval of 2 minutes or the maximum interval of 10 minutes if the state of RSVP sessions kept on changing during this period of multiple quiet intervals. [EFFECT] RSVP sessions represented by bits in vRtrMplsXCNotifRednIndicesBitMap changed state on this router instance. [RECOVERY] There is no recovery required for this notification." ::= { tmnxMplsNotifications 22 } vRtrMplsLblRangeModify NOTIFICATION-TYPE OBJECTS { vRtrMplsLabelMaxStaticLspLabels, vRtrMplsLabelMaxStaticSvcLabels } STATUS obsolete DESCRIPTION "[CAUSE] vRtrMplsLblRangeModify is generated when the values of vRtrMplsLabelMaxStaticLspLabels or vRtrMplsLabelMaxStaticSvcLabels have been modified. [EFFECT] The maximum static labels are modified. [RECOVERY] There is no recovery required for this notification." ::= { tmnxMplsNotifications 23 } vRtrMplsNodeInIgpOverload NOTIFICATION-TYPE OBJECTS { vRtrMplsGenRetryOnIgpOverload, vRtrMplsIgpOverloadRtrAddrType, vRtrMplsIgpOverloadRtrAddr, vRtrMplsIgpOverloadIgpType } STATUS current DESCRIPTION "[CAUSE] The vRtrMplsNodeInIgpOverload notification is generated when MPLS gets a notification that a node is in IGP overload state. [EFFECT] The LSPs transiting through nodes that are in IGP overload state are teardown. [RECOVERY] There is no recovery required for this notification." ::= { tmnxMplsNotifications 24 } -- -- Conformance Information -- tmnxMplsCompliances OBJECT IDENTIFIER ::= { tmnxMplsConformance 1 } tmnxMplsGroups OBJECT IDENTIFIER ::= { tmnxMplsConformance 2 } -- compliance statements -- tmnxMplsCompliance MODULE-COMPLIANCE -- ::= { tmnxMplsCompliances 1 } -- tmnxMplsR2r1Compliance MODULE-COMPLIANCE -- ::= { tmnxMplsCompliances 2 } tmnxMplsV3v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 3.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalR2r1Group, tmnxMplsLspR2r1Group, tmnxMplsLspPathGroup, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup } ::= { tmnxMplsCompliances 3 } tmnxMplsV5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 5.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalV5v0Group, tmnxMplsLspV5v0Group, tmnxMplsLspPathGroup, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup } ::= { tmnxMplsCompliances 4 } tmnxMplsV6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 6.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalV6v0Group, tmnxMplsLspV5v0Group, tmnxMplsLspPathGroup, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsLspPathV6v0Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group } ::= { tmnxMplsCompliances 5 } tmnxMplsV6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 6.1 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalV6v0Group, tmnxMplsLspV5v0Group, tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsLspPathV6v1Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group } ::= { tmnxMplsCompliances 6 } tmnxMplsV7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 6.1 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalV6v0Group, tmnxMplsLspV5v0Group, tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsLspPathV6v1Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group } ::= { tmnxMplsCompliances 7 } tmnxMplsV8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 8.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalV6v0Group, tmnxMplsLspV5v0Group, tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsLspPathV6v1Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group, tmnxMplsLspV8v0Group, tmnxMplsLspPathV8v0Group, tmnxMplsNotifyObjsV8v0Group, tmnxMplsNotificationV8v0Group, tmnxMplsGlobalV8v0Group, tmnxMplsLspAutoBWV8v0Group, tmnxMplsLspTemplateV8v0Group } ::= { tmnxMplsCompliances 8 } tmnxMplsV9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 9.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalV6v0Group, tmnxMplsLspV5v0Group, tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsLspPathV6v1Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group, tmnxMplsLspV8v0Group, tmnxMplsLspPathV8v0Group, tmnxMplsNotifyObjsV8v0Group, tmnxMplsNotificationV8v0Group, tmnxMplsGlobalV8v0Group, tmnxMplsLspAutoBWV8v0Group, tmnxMplsLspTemplateV8v0Group, tmnxMplsGlobalV9v0Group, tmnxMplsLspV9v0Group, tmnxMplsLspV9v0R4Group, tmnxMplsNotifV9v0R4Group, tmnxMplsLspPathV9v0R4Group } ::= { tmnxMplsCompliances 9 } tmnxMplsV10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 10.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsGlobalV6v0Group, tmnxMplsLspV5v0Group, tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsLspPathV6v1Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group, tmnxMplsLspV8v0Group, tmnxMplsLspPathV8v0Group, tmnxMplsNotifyObjsV8v0Group, tmnxMplsNotificationV8v0Group, tmnxMplsGlobalV8v0Group, tmnxMplsLspAutoBWV8v0Group, tmnxMplsLspTemplateV8v0Group, tmnxMplsGlobalV9v0Group, tmnxMplsLspV9v0Group, tmnxMplsLspV9v0R4Group, tmnxMplsNotifV9v0R4Group, tmnxMplsLspPathV9v0R4Group, tmnxMplsGlobalV10v0Group } ::= { tmnxMplsCompliances 10 } tmnxMplsV11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 11.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group, tmnxMplsLspV8v0Group, tmnxMplsLspPathV8v0Group, tmnxMplsNotifyObjsV8v0Group, tmnxMplsNotificationV8v0Group, tmnxMplsGlobalV8v0Group, tmnxMplsLspAutoBWV8v0Group, tmnxMplsLspTemplateV8v0Group, tmnxMplsGlobalV9v0Group, tmnxMplsLspV9v0R4Group, tmnxMplsNotifV9v0R4Group, tmnxMplsLspPathV9v0R4Group, tmnxMplsTpGroup, tmnxMplsNotifyObjsV10v0Group, tmnxMplsNotifyV10v0Group, tmnxMplsFRAdminGroup, tmnxMplsGlobalV11v0Group, tmnxMplsLspTemplateGroup, tmnxMplsNotifyV11v0Group, tmnxMplsLspAutoBWFcWtGroup, tmnxMplsGlobalV11v0R4Group, tmnxMplsNotifyObjsIgpOverload, tmnxMplsIgpOverloadNotify } ::= { tmnxMplsCompliances 11 } tmnxMplsV12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 12.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group, tmnxMplsLspV8v0Group, tmnxMplsLspPathV8v0Group, tmnxMplsNotifyObjsV8v0Group, tmnxMplsNotificationV8v0Group, tmnxMplsGlobalV8v0Group, tmnxMplsLspAutoBWV8v0Group, tmnxMplsLspTemplateV8v0Group, tmnxMplsGlobalV9v0Group, tmnxMplsLspV9v0R4Group, tmnxMplsNotifV9v0R4Group, tmnxMplsLspPathV9v0R4Group, tmnxMplsTpGroup, tmnxMplsNotifyObjsV10v0Group, tmnxMplsNotifyV10v0Group, tmnxMplsFRAdminGroup, tmnxMplsLspTemplateGroup, tmnxMplsLspAutoBWFcWtGroup, tmnxMplsGlobalV11v0R4Group, tmnxMplsNotifyObjsIgpOverload, tmnxMplsIgpOverloadNotify, tmnxMplsLspTempInStatsGroup, tmnxMplsAutoBwUnderflowGroup, tmnxMplsBgpLabelRetentionGroup, tmnxMplsGlobalV12v0Group, tmnxMplsBypassOptGroup, tmnxMplsGlobalV12v0Group, tmnxMplsLSPPathV12v0Group, tmnxMplsGenV12v0Group, tmnxMplsLSPV12v0Group } ::= { tmnxMplsCompliances 12 } tmnxMplsV13v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 12.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsAdminGroupGroup, -- tmnxMplsFSGroupGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsSrlgV6v0Group, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group, tmnxMplsLspV8v0Group, tmnxMplsLspPathV8v0Group, tmnxMplsNotifyObjsV8v0Group, tmnxMplsNotificationV8v0Group, tmnxMplsGlobalV8v0Group, tmnxMplsLspAutoBWV8v0Group, tmnxMplsLspTemplateV8v0Group, tmnxMplsGlobalV9v0Group, tmnxMplsLspV9v0R4Group, tmnxMplsNotifV9v0R4Group, tmnxMplsLspPathV9v0R4Group, tmnxMplsTpGroup, tmnxMplsNotifyObjsV10v0Group, tmnxMplsNotifyV10v0Group, tmnxMplsFRAdminGroup, tmnxMplsLspTemplateGroup, tmnxMplsLspAutoBWFcWtGroup, tmnxMplsGlobalV11v0R4Group, tmnxMplsNotifyObjsIgpOverload, tmnxMplsIgpOverloadNotify, tmnxMplsLspTempInStatsGroup, tmnxMplsAutoBwUnderflowGroup, tmnxMplsBgpLabelRetentionGroup, tmnxMplsBypassOptGroup, tmnxMplsLSPPathV12v0Group, tmnxMplsGenV12v0Group, tmnxMplsLSPV12v0Group, tmnxMplsLoadBalanceWtV13v0Group, tmnxMplsLabelSegRouteV13v0Group, tmnxMplsLabelStaticRgeV13v0Group, tmnxMplsGlobalV13v0Group, tmnxMplsClassBasedFwdV13v0Group, tmnxMplsBfdOnLspV13v0Group } ::= { tmnxMplsCompliances 13 } tmnxMplsV14v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of extended MPLS on Nokia SROS series systems 14.0 Release." MODULE -- this module MANDATORY-GROUPS { tmnxMplsLspPathV6v0Group, tmnxMplsXCGroup, tmnxMplsIfGroup, tmnxMplsTunnelARHopGroup, tmnxMplsTunnelCHopGroup, tmnxMplsNotificationR2r1Group, tmnxMplsLabelRangeGroup, tmnxMplsIfV6v0Group, tmnxMplsLspV6v0Group, tmnxMplsLspV7v0Group, tmnxMplsGlobalV7v0Group, tmnxMplsP2mpInstanceGroup, tmnxMplsP2mpS2lGroup, tmnxMplsNotificationV7v0Group, tmnxMplsLspPathV7v0Group, tmnxMplsSrlgV7v0Group, tmnxMplsLspStatsV7v0Group, tmnxMplsLspV8v0Group, tmnxMplsLspPathV8v0Group, tmnxMplsNotifyObjsV8v0Group, tmnxMplsNotificationV8v0Group, tmnxMplsGlobalV8v0Group, tmnxMplsLspAutoBWV8v0Group, tmnxMplsLspTemplateV8v0Group, tmnxMplsGlobalV9v0Group, tmnxMplsLspV9v0R4Group, tmnxMplsNotifV9v0R4Group, tmnxMplsLspPathV9v0R4Group, tmnxMplsTpGroup, tmnxMplsNotifyObjsV10v0Group, tmnxMplsNotifyV10v0Group, tmnxMplsFRAdminGroup, tmnxMplsLspTemplateGroup, tmnxMplsLspAutoBWFcWtGroup, tmnxMplsGlobalV11v0R4Group, tmnxMplsNotifyObjsIgpOverload, tmnxMplsIgpOverloadNotify, tmnxMplsLspTempInStatsGroup, tmnxMplsAutoBwUnderflowGroup, tmnxMplsBgpLabelRetentionGroup, tmnxMplsBypassOptGroup, tmnxMplsLSPPathV12v0Group, tmnxMplsGenV12v0Group, tmnxMplsLSPV12v0Group, tmnxMplsLoadBalanceWtV13v0Group, tmnxMplsLabelSegRouteV13v0Group, tmnxMplsLabelStaticRgeV13v0Group, tmnxMplsGlobalV13v0Group, tmnxMplsClassBasedFwdV13v0Group, tmnxMplsIfSrlgV14v0Group, tmnxMplsBfdOnLspV13v0Group, tmnxMplsSegRouting14v0Group, tmnxMplsEntropyLabel14v0Group, tmnxMplsLspTemplEL14v4Group, tmnxMplsSRLfaOvrhd14v4Group } ::= { tmnxMplsCompliances 14 } -- units of conformance -- tmnxMplsGlobalGroup OBJECT-GROUP -- ::= { tmnxMplsGroups 1 } -- tmnxMplsLspGroup OBJECT-GROUP -- ::= { tmnxMplsGroups 2 } tmnxMplsLspPathGroup OBJECT-GROUP OBJECTS { vRtrMplsLspPathTableSpinlock, vRtrMplsLspPathRowStatus, vRtrMplsLspPathLastChange, vRtrMplsLspPathType, vRtrMplsLspPathCos, vRtrMplsLspPathProperties, vRtrMplsLspPathBandwidth, vRtrMplsLspPathBwProtect, vRtrMplsLspPathState, vRtrMplsLspPathPreference, vRtrMplsLspPathCosSource, vRtrMplsLspPathClassOfService, vRtrMplsLspPathSetupPriority, vRtrMplsLspPathHoldPriority, vRtrMplsLspPathRecord, vRtrMplsLspPathHopLimit, vRtrMplsLspPathSharing, vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState, vRtrMplsLspPathInheritance, vRtrMplsLspPathLspId, vRtrMplsLspPathRetryTimeRemaining, vRtrMplsLspPathTunnelARHopListIndex, vRtrMplsLspPathNegotiatedMTU, vRtrMplsLspPathFailCode, vRtrMplsLspPathFailNodeAddr, vRtrMplsLspPathAdminGroupInclude, vRtrMplsLspPathAdminGroupExclude, vRtrMplsLspPathAdaptive, vRtrMplsLspPathOptimizeTimer, vRtrMplsLspPathNextOptimize, vRtrMplsLspPathOperBandwidth, vRtrMplsLspPathMBBState, vRtrMplsLspPathResignal, vRtrMplsLspPathTunnelCRHopListIndex, vRtrMplsLspPathOperMTU, vRtrMplsLspPathRecordLabel, vRtrMplsLspPathTimeUp, vRtrMplsLspPathTimeDown, vRtrMplsLspPathRetryAttempts, vRtrMplsLspPathTransitionCount, vRtrMplsLspPathCspfQueries } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended MPLS LSP to path mapping on Nokia SROS series systems." ::= { tmnxMplsGroups 3 } tmnxMplsXCGroup OBJECT-GROUP OBJECTS { vRtrMplsXCIndex, vRtrMplsInSegmentIfIndex, vRtrMplsInSegmentLabel, vRtrMplsOutSegmentIndex, vRtrMplsERHopTunnelIndex, vRtrMplsARHopTunnelIndex, vRtrMplsRsvpSessionIndex, vRtrMplsXCFailCode, vRtrMplsXCCHopTableIndex } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS LSP to cross-connection mapping on Nokia SROS series systems." ::= { tmnxMplsGroups 4 } tmnxMplsIfGroup OBJECT-GROUP OBJECTS { vRtrMplsIfAdminState, vRtrMplsIfOperState, vRtrMplsIfAdminGroup, vRtrMplsIfTxPktCount, vRtrMplsIfRxPktCount, vRtrMplsIfTxOctetCount, vRtrMplsIfRxOctetCount } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS interfaces on Nokia SROS series systems." ::= { tmnxMplsGroups 5 } tmnxMplsTunnelARHopGroup OBJECT-GROUP OBJECTS { vRtrMplsTunnelARHopProtection, vRtrMplsTunnelARHopRecordLabel, vRtrMplsTunnelARHopRouterId } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS Tunnel AR hops on Nokia SROS series systems." ::= { tmnxMplsGroups 6 } tmnxMplsTunnelCHopGroup OBJECT-GROUP OBJECTS { vRtrMplsTunnelCHopAddrType, vRtrMplsTunnelCHopIpv4Addr, vRtrMplsTunnelCHopIpv4PrefixLen, vRtrMplsTunnelCHopIpv6Addr, vRtrMplsTunnelCHopIpv6PrefixLen, vRtrMplsTunnelCHopAsNumber, vRtrMplsTunnelCHopLspId, vRtrMplsTunnelCHopStrictOrLoose } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS CSPF Tunnel hops on Nokia SROS series systems." ::= { tmnxMplsGroups 7 } tmnxMplsAdminGroupGroup OBJECT-GROUP OBJECTS { vRtrMplsAdminGroupRowStatus, vRtrMplsAdminGroupValue } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended MPLS administrative groups on Nokia SROS series systems." ::= { tmnxMplsGroups 8 } tmnxMplsFSGroupGroup OBJECT-GROUP OBJECTS { vRtrMplsFSGroupRowStatus, vRtrMplsFSGroupCost, vRtrMplsFSGroupParamsRowStatus } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended MPLS fate sharing groups on Nokia SROS series systems." ::= { tmnxMplsGroups 9 } tmnxMplsNotifyObjsGroup OBJECT-GROUP OBJECTS { vRtrMplsLspNotificationReasonCode, vRtrMplsLspPathNotificationReasonCode, vRtrMplsNotifyRow, vRtrMplsLspIndex } STATUS current DESCRIPTION "The group of objects supporting extended MPLS notifications on Nokia SROS series systems." ::= { tmnxMplsGroups 10 } -- tmnxMplsNotificationGroup NOTIFICATION-GROUP -- ::= { tmnxMplsGroups 11 } tmnxMplsGlobalR2r1Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralLastChange, vRtrMplsGeneralAdminState, vRtrMplsGeneralOperState, vRtrMplsGeneralPropagateTtl, vRtrMplsGeneralTE, vRtrMplsGeneralNewLspIndex, vRtrMplsGeneralOptimizeTimer, vRtrMplsGeneralFRObject, vRtrMplsGeneralResignalTimer, vRtrMplsGeneralStaticLspOriginate, vRtrMplsGeneralStaticLspTransit, vRtrMplsGeneralStaticLspTerminate, vRtrMplsGeneralDynamicLspOriginate, vRtrMplsGeneralDynamicLspTransit, vRtrMplsGeneralDynamicLspTerminate, vRtrMplsGeneralDetourLspOriginate, vRtrMplsGeneralDetourLspTransit, vRtrMplsGeneralDetourLspTerminate } STATUS obsolete DESCRIPTION "The group of objects supporting general management of extended MPLS on Nokia SROS series systems 2.1 Release." ::= { tmnxMplsGroups 12 } tmnxMplsLspR2r1Group OBJECT-GROUP OBJECTS { vRtrMplsLspRowStatus, vRtrMplsLspLastChange, vRtrMplsLspName, vRtrMplsLspAdminState, vRtrMplsLspOperState, vRtrMplsLspFromAddr, vRtrMplsLspToAddr, vRtrMplsLspType, vRtrMplsLspOutSegIndx, vRtrMplsLspRetryTimer, vRtrMplsLspRetryLimit, vRtrMplsLspMetric, vRtrMplsLspDecrementTtl, vRtrMplsLspCspf, vRtrMplsLspFastReroute, vRtrMplsLspFRHopLimit, vRtrMplsLspFRBandwidth, vRtrMplsLspClassOfService, vRtrMplsLspSetupPriority, vRtrMplsLspHoldPriority, vRtrMplsLspRecord, vRtrMplsLspPreference, vRtrMplsLspBandwidth, vRtrMplsLspBwProtect, vRtrMplsLspHopLimit, vRtrMplsLspNegotiatedMTU, vRtrMplsLspRsvpResvStyle, vRtrMplsLspRsvpAdspec, vRtrMplsLspFRMethod, vRtrMplsLspFRNodeProtect, vRtrMplsLspAdminGroupInclude, vRtrMplsLspAdminGroupExclude, vRtrMplsLspAdaptive, vRtrMplsLspInheritance, vRtrMplsLspOptimizeTimer, vRtrMplsLspOperFastReroute, vRtrMplsLspFRObject, vRtrMplsLspOctets, vRtrMplsLspPackets, vRtrMplsLspAge, vRtrMplsLspTimeUp, vRtrMplsLspTimeDown, vRtrMplsLspPrimaryTimeUp, vRtrMplsLspTransitions, vRtrMplsLspLastTransition, vRtrMplsLspPathChanges, vRtrMplsLspLastPathChange, vRtrMplsLspConfiguredPaths, vRtrMplsLspStandbyPaths, vRtrMplsLspOperationalPaths } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended MPLS LSPs on Nokia SROS series systems 2.1 Release." ::= { tmnxMplsGroups 13 } tmnxMplsNotificationR2r1Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsStateChange, vRtrMplsIfStateChange, vRtrMplsLspUp, vRtrMplsLspDown, vRtrMplsLspPathUp, vRtrMplsLspPathDown, vRtrMplsLspPathRerouted, vRtrMplsLspPathResignaled } STATUS current DESCRIPTION "The group of notifications supporting the extended MPLS feature on Nokia SROS series systems 2.1 Release." ::= { tmnxMplsGroups 14 } tmnxMplsLabelRangeGroup OBJECT-GROUP OBJECTS { vRtrMplsLabelRangeMin, vRtrMplsLabelRangeMax, vRtrMplsLabelRangeAging, vRtrMplsLabelRangeAvailable, vRtrMplsStaticLSPLabelOwner, vRtrMplsStaticSvcLabelOwner } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS label ranges on Nokia SROS series systems." ::= { tmnxMplsGroups 15 } tmnxMplsGlobalV5v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralLastChange, vRtrMplsGeneralAdminState, vRtrMplsGeneralOperState, vRtrMplsGeneralPropagateTtl, vRtrMplsGeneralTE, vRtrMplsGeneralNewLspIndex, vRtrMplsGeneralOptimizeTimer, vRtrMplsGeneralFRObject, vRtrMplsGeneralResignalTimer, vRtrMplsGeneralStaticLspOriginate, vRtrMplsGeneralStaticLspTransit, vRtrMplsGeneralStaticLspTerminate, vRtrMplsGeneralDynamicLspOriginate, vRtrMplsGeneralDynamicLspTransit, vRtrMplsGeneralDynamicLspTerminate, vRtrMplsGeneralDetourLspOriginate, vRtrMplsGeneralDetourLspTransit, vRtrMplsGeneralDetourLspTerminate, vRtrMplsGeneralHoldTimer, vRtrMplsGeneralDynamicBypass } STATUS obsolete DESCRIPTION "The group of objects supporting general management of extended MPLS on Nokia SROS series systems 5.0 Release." ::= { tmnxMplsGroups 16 } tmnxMplsLspV5v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspRowStatus, vRtrMplsLspLastChange, vRtrMplsLspName, vRtrMplsLspAdminState, vRtrMplsLspOperState, vRtrMplsLspFromAddr, vRtrMplsLspToAddr, vRtrMplsLspType, vRtrMplsLspOutSegIndx, vRtrMplsLspRetryTimer, vRtrMplsLspRetryLimit, vRtrMplsLspMetric, vRtrMplsLspDecrementTtl, vRtrMplsLspCspf, vRtrMplsLspFastReroute, vRtrMplsLspFRHopLimit, vRtrMplsLspFRBandwidth, vRtrMplsLspClassOfService, vRtrMplsLspSetupPriority, vRtrMplsLspHoldPriority, vRtrMplsLspRecord, vRtrMplsLspPreference, vRtrMplsLspBandwidth, vRtrMplsLspBwProtect, vRtrMplsLspHopLimit, vRtrMplsLspNegotiatedMTU, vRtrMplsLspRsvpResvStyle, vRtrMplsLspRsvpAdspec, vRtrMplsLspFRMethod, vRtrMplsLspFRNodeProtect, vRtrMplsLspAdminGroupInclude, vRtrMplsLspAdminGroupExclude, vRtrMplsLspAdaptive, vRtrMplsLspInheritance, vRtrMplsLspOptimizeTimer, vRtrMplsLspOperFastReroute, vRtrMplsLspFRObject, vRtrMplsLspOctets, vRtrMplsLspPackets, vRtrMplsLspAge, vRtrMplsLspTimeUp, vRtrMplsLspTimeDown, vRtrMplsLspPrimaryTimeUp, vRtrMplsLspTransitions, vRtrMplsLspLastTransition, vRtrMplsLspPathChanges, vRtrMplsLspLastPathChange, vRtrMplsLspConfiguredPaths, vRtrMplsLspStandbyPaths, vRtrMplsLspOperationalPaths, vRtrMplsLspHoldTimer } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended MPLS LSPs on Nokia SROS series systems 5.0 Release." ::= { tmnxMplsGroups 17 } tmnxMplsGlobalV6v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralLastChange, vRtrMplsGeneralAdminState, vRtrMplsGeneralOperState, vRtrMplsGeneralPropagateTtl, vRtrMplsGeneralTE, vRtrMplsGeneralNewLspIndex, vRtrMplsGeneralOptimizeTimer, vRtrMplsGeneralFRObject, vRtrMplsGeneralResignalTimer, vRtrMplsGeneralStaticLspOriginate, vRtrMplsGeneralStaticLspTransit, vRtrMplsGeneralStaticLspTerminate, vRtrMplsGeneralDynamicLspOriginate, vRtrMplsGeneralDynamicLspTransit, vRtrMplsGeneralDynamicLspTerminate, vRtrMplsGeneralDetourLspOriginate, vRtrMplsGeneralDetourLspTransit, vRtrMplsGeneralDetourLspTerminate, vRtrMplsGeneralHoldTimer, vRtrMplsGeneralDynamicBypass, vRtrMplsGeneralNextResignal, vRtrMplsGeneralOperDownReason, vRtrMplsGeneralSrlgFrr, vRtrMplsGeneralSrlgFrrStrict } STATUS obsolete DESCRIPTION "The group of objects supporting general management of extended MPLS on Nokia SROS series systems 6.0 Release." ::= { tmnxMplsGroups 18 } tmnxMplsSrlgV6v0Group OBJECT-GROUP OBJECTS { vRtrMplsSrlgGrpTableLastChanged, vRtrMplsSrlgGrpRowStatus, vRtrMplsSrlgGrpLastChanged, vRtrMplsSrlgGrpValue, vRtrMplsIfSrlgGrpTblLastChanged, vRtrMplsIfSrlgGrpRowStatus, vRtrMplsIfSrlgGrpLastChanged } STATUS obsolete DESCRIPTION "The group of objects supporting management of SRLG on Nokia 7xxx SR series systems release 6.0." ::= { tmnxMplsGroups 19 } tmnxMplsLspPathV6v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathSrlg, vRtrMplsLspPathSrlgDisjoint } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS LSP to path mapping on Nokia SROS series systems." ::= { tmnxMplsGroups 20 } tmnxMplsIfV6v0Group OBJECT-GROUP OBJECTS { vRtrMplsIfTeMetric } STATUS current DESCRIPTION "The group of objects supporting management of Te metric feature on extended MPLS interfaces on 6.0 release Nokia SROS series systems." ::= { tmnxMplsGroups 21 } tmnxMplsLspV6v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspCspfTeMetricEnabled } STATUS current DESCRIPTION "The group of objects supporting management of Te metric feature extended MPLS LSPs on 6.0 release Nokia SROS series systems." ::= { tmnxMplsGroups 22 } tmnxMplsLspPathV6v1Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathTableSpinlock, vRtrMplsLspPathRowStatus, vRtrMplsLspPathLastChange, vRtrMplsLspPathType, vRtrMplsLspPathCos, vRtrMplsLspPathProperties, vRtrMplsLspPathBandwidth, vRtrMplsLspPathBwProtect, vRtrMplsLspPathState, vRtrMplsLspPathPreference, vRtrMplsLspPathCosSource, vRtrMplsLspPathClassOfService, vRtrMplsLspPathSetupPriority, vRtrMplsLspPathHoldPriority, vRtrMplsLspPathRecord, vRtrMplsLspPathHopLimit, vRtrMplsLspPathSharing, vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState, vRtrMplsLspPathInheritance, vRtrMplsLspPathLspId, vRtrMplsLspPathRetryTimeRemaining, vRtrMplsLspPathTunnelARHopListIndex, vRtrMplsLspPathNegotiatedMTU, vRtrMplsLspPathFailCode, vRtrMplsLspPathFailNodeAddr, vRtrMplsLspPathAdminGroupInclude, vRtrMplsLspPathAdminGroupExclude, vRtrMplsLspPathAdaptive, vRtrMplsLspPathOptimizeTimer, vRtrMplsLspPathNextOptimize, vRtrMplsLspPathOperBandwidth, vRtrMplsLspPathResignal, vRtrMplsLspPathTunnelCRHopListIndex, vRtrMplsLspPathOperMTU, vRtrMplsLspPathRecordLabel, vRtrMplsLspPathTimeUp, vRtrMplsLspPathTimeDown, vRtrMplsLspPathRetryAttempts, vRtrMplsLspPathTransitionCount, vRtrMplsLspPathCspfQueries, vRtrMplsLspPathLastResigAttempt, vRtrMplsLspPathMetric, vRtrMplsLspPathLastMBBType, vRtrMplsLspPathLastMBBEnd, vRtrMplsLspPathLastMBBMetric, vRtrMplsLspPathLastMBBState, vRtrMplsLspPathMBBTypeInProg, vRtrMplsLspPathMBBStarted, vRtrMplsLspPathMBBNextRetry, vRtrMplsLspPathMBBRetryAttempts, vRtrMplsLspPathMBBFailCode, vRtrMplsLspPathMBBFailNodeArType, vRtrMplsLspPathMBBFailNodeAddr } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended MPLS LSP to path mapping on Nokia SROS series systems." ::= { tmnxMplsGroups 23 } tmnxMplsObsoleteGroup OBJECT-GROUP OBJECTS { vRtrMplsLspPathMBBState, vRtrMplsFSGroupCost, vRtrMplsFSGroupParamsRowStatus, vRtrMplsFSGroupRowStatus } STATUS current DESCRIPTION "The group of obsolete objects which are no longer supported in MPLS on 6.0R4 release onwards on Nokia SROS series systems." ::= { tmnxMplsGroups 24 } tmnxMplsLspV7v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspP2mpId, vRtrMplsLspClassType, vRtrMplsLspOperMetric, vRtrMplsLspLdpOverRsvpInclude, vRtrMplsLspLeastFill, vRtrMplsLspVprnAutoBindInclude, vRtrMplsLspConfP2mpInstances } STATUS current DESCRIPTION "The group of objects supporting management of extended LSP in MPLS on on Nokia SROS series systems 7.0 release." ::= { tmnxMplsGroups 25 } tmnxMplsGlobalV7v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralNewP2mpInstIndex, vRtrMplsGeneralS2lOriginate, vRtrMplsGeneralS2lTransit, vRtrMplsGeneralS2lTerminate, vRtrMplsGeneralLeastFillMinThd, vRtrMplsGenLeastFillReoptiThd , vRtrMplsGeneralUseSrlgDB, vRtrMplsInSegmentNumS2ls, vRtrMplsOutSegmentNumS2ls, vRtrMplsGeneralP2mpResigTimer, vRtrMplsGeneralP2mpNextResignal, vRtrMplsGeneralSecFastRetryTimer, vRtrMplsGeneralStaticLspFRTimer } STATUS current DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 7.0 release." ::= { tmnxMplsGroups 26 } tmnxMplsP2mpInstanceGroup OBJECT-GROUP OBJECTS { vRtrMplsP2mpInstTblLastChanged, vRtrMplsP2mpInstRowStatus, vRtrMplsP2mpInstLastChange, vRtrMplsP2mpInstName, vRtrMplsP2mpInstType, vRtrMplsP2mpInstProperties, vRtrMplsP2mpInstBandwidth, vRtrMplsP2mpInstState, vRtrMplsP2mpInstSetupPriority, vRtrMplsP2mpInstHoldPriority, vRtrMplsP2mpInstRecord, vRtrMplsP2mpInstHopLimit , vRtrMplsP2mpInstAdminState, vRtrMplsP2mpInstOperState, vRtrMplsP2mpInstInheritance, vRtrMplsP2mpInstLspId, vRtrMplsP2mpInstNegotiatedMTU, vRtrMplsP2mpInstFailCode, vRtrMplsP2mpInstFailNodeArType, vRtrMplsP2mpInstFailNodeAddr, vRtrMplsP2mpInstAdminGrpInclude, vRtrMplsP2mpInstAdminGrpExclude, vRtrMplsP2mpInstAdaptive, vRtrMplsP2mpInstOperBandwidth, vRtrMplsP2mpInstResignal, vRtrMplsP2mpInstOperMTU, vRtrMplsP2mpInstRecordLabel, vRtrMplsP2mpInstLastResigAttpt, vRtrMplsP2mpInstMetric, vRtrMplsP2mpInstLastMBBType, vRtrMplsP2mpInstLastMBBEnd, vRtrMplsP2mpInstLastMBBMetric, vRtrMplsP2mpInstLastMBBState, vRtrMplsP2mpInstMBBTypeInProg , vRtrMplsP2mpInstMBBStarted , vRtrMplsP2mpInstMBBNextRetry, vRtrMplsP2mpInstMBBRetryAttpts, vRtrMplsP2mpInstMBBFailCode, vRtrMplsP2mpInstMBBFailNodeType, vRtrMplsP2mpInstMBBFailNodeAddr, vRtrMplsP2mpInstStatS2lChanges, vRtrMplsP2mpInstStatLastS2lChange, vRtrMplsP2mpInstStatConfiguredS2ls, vRtrMplsP2mpInstStatOperationalS2ls, vRtrMplsP2mpInstStatLastS2lTimeUp, vRtrMplsP2mpInstStatLastS2lTimeDown, vRtrMplsP2mpInstStatTimeUp, vRtrMplsP2mpInstStatTimeDown, vRtrMplsP2mpInstStatTransitions, vRtrMplsP2mpInstStatLastTrans } STATUS current DESCRIPTION "The group of all P2MP instance related objects supporting management of P2MP feature in MPLS on Nokia SROS series systems 7.0 release." ::= { tmnxMplsGroups 27 } tmnxMplsP2mpS2lGroup OBJECT-GROUP OBJECTS { vRtrMplsS2lSubLspTblLastChanged, vRtrMplsS2lSubLspRowStatus , vRtrMplsS2lSubLspLastChange, vRtrMplsS2lSubLspType, vRtrMplsS2lSubLspProperties, vRtrMplsS2lSubLspState, vRtrMplsS2lSubLspAdminState, vRtrMplsS2lSubLspOperState, vRtrMplsS2lSubGroupId, vRtrMplsS2lSubLspId, vRtrMplsS2lSubLspRetryTimeRemain, vRtrMplsS2lSubLspNegotiatedMTU, vRtrMplsS2lSubLspFailCode, vRtrMplsS2lSubLspFailNodeArType, vRtrMplsS2lSubLspFailNodeAddr, vRtrMplsS2lSubLspOperBandwidth, vRtrMplsS2lSubLspOperMTU, vRtrMplsS2lSubLspLastResigAttpt, vRtrMplsS2lSubLspLastMBBType, vRtrMplsS2lSubLspLastMBBEnd, vRtrMplsS2lSubLspLastMBBMetric, vRtrMplsS2lSubLspLastMBBState, vRtrMplsS2lSubLspMBBTypeInProg, vRtrMplsS2lSubLspMBBStarted , vRtrMplsS2lSubLspMBBNextRetry, vRtrMplsS2lSubLspMBBRetryAttpts, vRtrMplsS2lSubLspMBBFailCode, vRtrMplsS2lSubLspMBBFailNodeType, vRtrMplsS2lSubLspMBBFailNodeAddr, vRtrMplsS2lSubLspUpTime, vRtrMplsS2lSubLspDownTime, vRtrMplsS2lSubLspTimeUp, vRtrMplsS2lSubLspTimeDown, vRtrMplsS2lSubLspRetryAttempts, vRtrMplsS2lSubLspTransitionCount, vRtrMplsS2lSubLspCspfQueries, vRtrMplsS2lSubLspTunARHopLtIndex, vRtrMplsS2lSubLspTunCRHopLtIndex } STATUS current DESCRIPTION "The group of all S2L sub-LSP related objects supporting management of P2MP feature in MPLS on Nokia SROS series systems 7.0 release." ::= { tmnxMplsGroups 28} tmnxMplsNotifyObjsV7v0Group OBJECT-GROUP OBJECTS { vRtrMplsP2mpInstNotifIndex, vRtrMplsS2lSubLspNtDstAddrType, vRtrMplsS2lSubLspNtDstAddr, vRtrMplsP2mpInstNotifReasonCode, vRtrMplsLspPathCongChgPercent } STATUS current DESCRIPTION "The group of notification objects supporting extended MPLS notifications on Nokia SROS series systems 7.0 release." ::= { tmnxMplsGroups 29 } tmnxMplsNotificationV7v0Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsP2mpInstanceUp, vRtrMplsP2mpInstanceDown, vRtrMplsS2lSubLspUp, vRtrMplsS2lSubLspDown, vRtrMplsS2lSubLspRerouted, vRtrMplsS2lSubLspResignaled, vRtrMplsLspPathSoftPreempted, vRtrMplsLspPathLstFillReoptElig, vRtrMplsP2mpInstanceResignaled, vRtrMplsResignalTimerExpired } STATUS current DESCRIPTION "The group of notifications supporting the extended MPLS feature on Nokia SROS series systems 7.0 Release." ::= { tmnxMplsGroups 30 } tmnxMplsLspPathV7v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathClassType, vRtrMplsLspPathOperMetric, vRtrMplsLspPathResignalEligible, vRtrMplsLspPathIsFastRetry } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS LSP to path mapping on Nokia SROS series systems." ::= { tmnxMplsGroups 31 } tmnxMplsSrlgV7v0Group OBJECT-GROUP OBJECTS { vRtrMplsSrlgDBRtrIdRowStatus, vRtrMplsSrlgDBRtrIdAdminState, vRtrMplsSrlgDBRtrIdLastChanged, vRtrMplsSrlgDBRtrIdTblLastChg, vRtrMplsSrlgDBIfRowStatus, vRtrMplsSrlgDBIfLastChanged, vRtrMplsSrlgDBIfTblLastChanged } STATUS current DESCRIPTION "The group of objects supporting management of SRLG on Nokia SROS series systems release 7.0." ::= { tmnxMplsGroups 32 } tmnxMplsLspStatsV7v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspStatsAccntingPolicy, vRtrMplsLspStatsCollectStats, vRtrMplsLspStatsLastChanged, vRtrMplsLspStatsRowStatus, vRtrMplsLspStatsTblLastChgd, vRtrMplsLspStatsAdminState, vRtrMplsInProfileOctetsFc0, vRtrMplsInProfileOctetsFc0High32, vRtrMplsInProfileOctetsFc0Low32, vRtrMplsInProfileOctetsFc1, vRtrMplsInProfileOctetsFc1High32, vRtrMplsInProfileOctetsFc1Low32, vRtrMplsInProfileOctetsFc2, vRtrMplsInProfileOctetsFc2High32, vRtrMplsInProfileOctetsFc2Low32, vRtrMplsInProfileOctetsFc3, vRtrMplsInProfileOctetsFc3High32, vRtrMplsInProfileOctetsFc3Low32, vRtrMplsInProfileOctetsFc4, vRtrMplsInProfileOctetsFc4High32, vRtrMplsInProfileOctetsFc4Low32, vRtrMplsInProfileOctetsFc5, vRtrMplsInProfileOctetsFc5High32, vRtrMplsInProfileOctetsFc5Low32, vRtrMplsInProfileOctetsFc6, vRtrMplsInProfileOctetsFc6High32, vRtrMplsInProfileOctetsFc6Low32, vRtrMplsInProfileOctetsFc7, vRtrMplsInProfileOctetsFc7High32, vRtrMplsInProfileOctetsFc7Low32, vRtrMplsInProfilePktsFc0, vRtrMplsInProfilePktsFc0High32, vRtrMplsInProfilePktsFc0Low32, vRtrMplsInProfilePktsFc1, vRtrMplsInProfilePktsFc1High32, vRtrMplsInProfilePktsFc1Low32, vRtrMplsInProfilePktsFc2, vRtrMplsInProfilePktsFc2High32, vRtrMplsInProfilePktsFc2Low32, vRtrMplsInProfilePktsFc3, vRtrMplsInProfilePktsFc3High32, vRtrMplsInProfilePktsFc3Low32, vRtrMplsInProfilePktsFc4, vRtrMplsInProfilePktsFc4High32, vRtrMplsInProfilePktsFc4Low32, vRtrMplsInProfilePktsFc5, vRtrMplsInProfilePktsFc5High32, vRtrMplsInProfilePktsFc5Low32, vRtrMplsInProfilePktsFc6, vRtrMplsInProfilePktsFc6High32, vRtrMplsInProfilePktsFc6Low32, vRtrMplsInProfilePktsFc7, vRtrMplsInProfilePktsFc7High32, vRtrMplsInProfilePktsFc7Low32, vRtrMplsOutOfProfOctetsFc0, vRtrMplsOutOfProfOctetsFc0High32, vRtrMplsOutOfProfOctetsFc0Low32, vRtrMplsOutOfProfOctetsFc1, vRtrMplsOutOfProfOctetsFc1High32, vRtrMplsOutOfProfOctetsFc1Low32, vRtrMplsOutOfProfOctetsFc2, vRtrMplsOutOfProfOctetsFc2High32, vRtrMplsOutOfProfOctetsFc2Low32, vRtrMplsOutOfProfOctetsFc3, vRtrMplsOutOfProfOctetsFc3High32, vRtrMplsOutOfProfOctetsFc3Low32, vRtrMplsOutOfProfOctetsFc4, vRtrMplsOutOfProfOctetsFc4High32, vRtrMplsOutOfProfOctetsFc4Low32, vRtrMplsOutOfProfOctetsFc5, vRtrMplsOutOfProfOctetsFc5High32, vRtrMplsOutOfProfOctetsFc5Low32, vRtrMplsOutOfProfOctetsFc6, vRtrMplsOutOfProfOctetsFc6High32, vRtrMplsOutOfProfOctetsFc6Low32, vRtrMplsOutOfProfOctetsFc7, vRtrMplsOutOfProfOctetsFc7High32, vRtrMplsOutOfProfOctetsFc7Low32, vRtrMplsOutOfProfPktsFc0, vRtrMplsOutOfProfPktsFc0High32, vRtrMplsOutOfProfPktsFc0Low32, vRtrMplsOutOfProfPktsFc1, vRtrMplsOutOfProfPktsFc1High32, vRtrMplsOutOfProfPktsFc1Low32, vRtrMplsOutOfProfPktsFc2, vRtrMplsOutOfProfPktsFc2High32, vRtrMplsOutOfProfPktsFc2Low32, vRtrMplsOutOfProfPktsFc3, vRtrMplsOutOfProfPktsFc3High32, vRtrMplsOutOfProfPktsFc3Low32, vRtrMplsOutOfProfPktsFc4, vRtrMplsOutOfProfPktsFc4High32, vRtrMplsOutOfProfPktsFc4Low32, vRtrMplsOutOfProfPktsFc5, vRtrMplsOutOfProfPktsFc5High32, vRtrMplsOutOfProfPktsFc5Low32, vRtrMplsOutOfProfPktsFc6, vRtrMplsOutOfProfPktsFc6High32, vRtrMplsOutOfProfPktsFc6Low32, vRtrMplsOutOfProfPktsFc7, vRtrMplsOutOfProfPktsFc7High32, vRtrMplsOutOfProfPktsFc7Low32, vRtrMplsLspStatsPSBMatch, vRtrMplsGeneralLspEgrStatCount, vRtrMplsGeneralLspIgrStatCount } STATUS current DESCRIPTION "The group of objects supporting management of egress/ingress statistics on Nokia SROS series systems release 7.0." ::= { tmnxMplsGroups 33 } tmnxMplsLspV8v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspMainCTRetryLimit, vRtrMplsLspIgpShortcut } STATUS current DESCRIPTION "The group of objects supporting management of extended LSP in MPLS on Nokia SROS series systems 8.0 release." ::= { tmnxMplsGroups 34 } tmnxMplsLspPathV8v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathBackupCT, vRtrMplsLspPathMainCTRetryRem, vRtrMplsLspPathOperCT, vRtrMplsLspPathNewPathIndex, vRtrMplsLspPathMBBMainCTRetryRem } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS LSP to path mapping on Nokia SROS series systems 8.0 release." ::= { tmnxMplsGroups 35 } tmnxMplsNotifyObjsV8v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathMbbStatus, vRtrMplsLspPathMbbReasonCode } STATUS current DESCRIPTION "The group of notification objects supporting extended MPLS notifications on Nokia SROS series systems 8.0 release." ::= { tmnxMplsGroups 36 } tmnxMplsNotificationV8v0Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsLspPathMbbStatusEvent } STATUS current DESCRIPTION "The group of notifications supporting the extended MPLS feature on Nokia SROS series systems 8.0 Release." ::= { tmnxMplsGroups 37 } tmnxMplsGlobalV8v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralShortTTLPropLocal, vRtrMplsGeneralShortTTLPropTrans, vRtrMplsGeneralAutoBWDefSampMul, vRtrMplsGeneralAutoBWDefAdjMul, vRtrMplsGeneralExpBackoffRetry } STATUS current DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 8.0 release." ::= { tmnxMplsGroups 38 } tmnxMplsLspTemplateV8v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspTemplateTblLastChgd, vRtrMplsLspTemplateRowStatus, vRtrMplsLspTemplateLastChanged, vRtrMplsLspTemplateAdminState, vRtrMplsLspTemplateType, vRtrMplsLspTemplateAdaptive, vRtrMplsLspTemplateBandwidth, vRtrMplsLspTemplateCspf, vRtrMplsLspTemplateDefaultPath, vRtrMplsLspTemplateAdmGrpIncl, vRtrMplsLspTemplateAdmGrpExcl, vRtrMplsLspTemplateFastReroute, vRtrMplsLspTemplateFRMethod, vRtrMplsLspTemplateFRHopLimit, vRtrMplsLspTemplateHopLimit, vRtrMplsLspTemplateRecord, vRtrMplsLspTemplateRecordLabel, vRtrMplsLspTemplateRetryLimit, vRtrMplsLspTemplateRetryTimer, vRtrMplsLspTemplateCspfTeMetric, vRtrMplsLspOriginTemplate, vRtrMplsLspTemplateLspCount, vRtrMplsLspTemplateMvpnRefCount } STATUS current DESCRIPTION "The group of objects supporting management of LSP Templates in MPLS on Nokia SROS series systems 8.0 release." ::= { tmnxMplsGroups 39 } tmnxMplsLspAutoBWV8v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspAutoBandwidth, vRtrMplsLspAutoBWTableLastChg, vRtrMplsLspAutoBWLastChange, vRtrMplsLspAutoBWAdjDNPercent, vRtrMplsLspAutoBWAdjDNMbps, vRtrMplsLspAutoBWAdjMultiplier, vRtrMplsLspAutoBWAdjUPPercent, vRtrMplsLspAutoBWAdjUPMbps, vRtrMplsLspAutoBWMaxBW, vRtrMplsLspAutoBWMinBW, vRtrMplsLspAutoBWMonitorBW, vRtrMplsLspAutoBWOverFlow, vRtrMplsLspAutoBWOvrFlwThreshold, vRtrMplsLspAutoBWOvrFlwBW, vRtrMplsLspAutoBWSampMultiplier, vRtrMplsLspAutoBWSampTime, vRtrMplsLspAutoBWLastAdj, vRtrMplsLspAutoBWLastAdjCause, vRtrMplsLspAutoBWNextAdj, vRtrMplsLspAutoBWMaxAvgRate, vRtrMplsLspAutoBWLastAvgRate, vRtrMplsLspAutoBWInheritance, vRtrMplsLspAutoBWCurrentBW, vRtrMplsLspAutoBWAdjTime, vRtrMplsLspAutoBWOvrFlwCount, vRtrMplsLspAutoBWSampCount, vRtrMplsLspAutoBWAdjCount, vRtrMplsLspAutoBWOperState, vRtrMplsLspAutoBWSampInterval, vRtrMplsLspPathSigBWMBBInProg, vRtrMplsLspPathSigBWLastMBB } STATUS current DESCRIPTION "The group of all objects supporting management of Auto-Bandwidth in MPLS on Nokia SROS series systems 8.0 release." ::= { tmnxMplsGroups 40 } tmnxMplsGlobalV9v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralCspfOnLooseHop } STATUS current DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 9.0 release." ::= { tmnxMplsGroups 41 } tmnxMplsLspV9v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspCspfToFirstLoose, vRtrMplsLspPropAdminGroup } STATUS obsolete DESCRIPTION "The group of objects supporting management of extended LSP in MPLS on Nokia SROS series systems 9.0 release." ::= { tmnxMplsGroups 42 } tmnxMplsLspV9v0R4Group OBJECT-GROUP OBJECTS { vRtrMplsLspBgpShortcut, vRtrMplsLspBgpTransportTunnel, vRtrMplsLspSwitchStbyPath, vRtrMplsLspSwitchStbyPathIndex, vRtrMplsLspSwitchStbyPathForce, vRtrMplsGeneralP2PMaxByPassAssoc, vRtrMplsLspExcludeNodeAddr, vRtrMplsLspExcludeNodeAddrType } STATUS current DESCRIPTION "The group of objects supporting management of extended LSP in MPLS on Nokia SROS series systems 9.0R4 release." ::= { tmnxMplsGroups 43 } tmnxMplsNotifyObjsV9v0R4Group OBJECT-GROUP OBJECTS { vRtrMplsLspSwitchStbyReasonCode, vRtrMplsLspOldTunnelIndex } STATUS current DESCRIPTION "The group of notification objects supporting extended MPLS notifications on Nokia SROS series systems 9.0.R4 release." ::= { tmnxMplsGroups 44 } tmnxMplsNotifV9v0R4Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsLspSwitchStbyFailure, vRtrMplsLspActivePathChanged } STATUS current DESCRIPTION "The group of notifications supporting the extended MPLS feature on Nokia SROS series systems 9.0.R4 Release." ::= { tmnxMplsGroups 45 } tmnxMplsLspPathV9v0R4Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathActiveByManual } STATUS current DESCRIPTION "The group of objects supporting management of extended MPLS LSP to path mapping on Nokia SROS series systems 9.0.R4 release." ::= { tmnxMplsGroups 46 } tmnxMplsGlobalV10v0Group OBJECT-GROUP OBJECTS { vRtrMplsGenP2pActPathFastRetry, vRtrMplsGenP2mpS2lFastRetry, vRtrMplsS2lSubLspIsFastRetry, vRtrMplsLspPathTimeoutIn, vRtrMplsLspPathMBBTimeoutIn, vRtrMplsS2lSubLspTimeoutIn, vRtrMplsS2lSubLspMBBTimeoutIn, vRtrMplsLspPathOperSetupPriority, vRtrMplsLspPathOperHoldPriority, vRtrMplsLspPathOperRecord, vRtrMplsLspPathOperRecordLabel, vRtrMplsLspPathOperHopLimit, vRtrMplsLspPathOperAdminGrpIncl, vRtrMplsLspPathOperAdminGrExcld, vRtrMplsLspPathOperCspf, vRtrMplsLspPathOperCspfToFrstLs, vRtrMplsLspPathOperLeastFill, vRtrMplsLspPathOperRsvpAdspec, vRtrMplsLspPathOperFRNodeProtect, vRtrMplsLspPathOperPropAdminGrp, vRtrMplsLspPathOperFRHopLimit, vRtrMplsGenLspInitRetryTimeout, vRtrMplsLspIgpShortcutLfaType, vRtrMplsLoggerEventBundling, vRtrMplsGenIssuMplsLockdown } STATUS obsolete DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 10.0 release." ::= { tmnxMplsGroups 47 } tmnxMplsTpGroup OBJECT-GROUP OBJECTS { vRtrMplsLspToAddrType, vRtrMplsLspFromAddrType, vRtrMplsLspToNodeId, vRtrMplsLspFromNodeId, vRtrMplsLspDestGlobalId, vRtrMplsLspDestTunnelNum, vRtrMplsGenMplsTpLspOriginate, vRtrMplsGenMplsTpLspTransit, vRtrMplsGenMplsTpLspTerminate, vRtrMplsGenMplsTpOrigPathInst, vRtrMplsGenMplsTpTranPathInst, vRtrMplsGenMplsTpTermPathInst } STATUS current DESCRIPTION "The group of objects supporting management of the MPLS-TP feature on Nokia SROS series systems." ::= { tmnxMplsGroups 48 } tmnxMplsNotifyObjsV10v0Group OBJECT-GROUP OBJECTS { vRtrMplsXCNotifRednIndicesBitMap, vRtrMplsXCNotifyRednBundlingType, vRtrMplsXCNotifyRednNumOfBitsSet, vRtrMplsXCNotifyRednStartIndex, vRtrMplsXCNotifyRednEndIndex } STATUS current DESCRIPTION "The group of notification objects supporting extended MPLS notifications on Nokia SROS series systems 10.0 release." ::= { tmnxMplsGroups 49 } tmnxMplsNotifyV10v0Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsXCBundleChange } STATUS current DESCRIPTION "The group of notifications supporting the extended MPLS feature on Nokia SROS series systems 10.0 Release." ::= { tmnxMplsGroups 50 } tmnxMplsFRAdminGroup OBJECT-GROUP OBJECTS { vRtrMplsGenFRAdminGroup, vRtrMplsLspTemplateFRPropAdmGrp, vRtrMplsLspFRPropAdminGroup, vRtrMplsTunnelCHopEgressAdmGrp, vRtrMplsLspPathOperFRPropAdmGrp } STATUS current DESCRIPTION "The group of objects supporting administrative groups for Fast Reroute" ::= {tmnxMplsGroups 51 } tmnxMplsGlobalV11v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathOperInterArea, vRtrMplsTunnelCHopUnnumIfID, vRtrMplsTunnelCHopRtrID, vRtrMplsTunnelCHopIsABR, vRtrMplsTunnelARHopUnnumIfID, vRtrMplsLspRowStatus, vRtrMplsLspLastChange, vRtrMplsLspName, vRtrMplsLspAdminState, vRtrMplsLspOperState, vRtrMplsLspFromAddr, vRtrMplsLspToAddr, vRtrMplsLspType, vRtrMplsLspOutSegIndx, vRtrMplsLspRetryTimer, vRtrMplsLspRetryLimit, vRtrMplsLspMetric, vRtrMplsLspCspf, vRtrMplsLspFastReroute, vRtrMplsLspFRHopLimit, vRtrMplsLspFRBandwidth, vRtrMplsLspSetupPriority, vRtrMplsLspHoldPriority, vRtrMplsLspRecord, vRtrMplsLspBandwidth, vRtrMplsLspHopLimit, vRtrMplsLspNegotiatedMTU, vRtrMplsLspRsvpResvStyle, vRtrMplsLspRsvpAdspec, vRtrMplsLspFRMethod, vRtrMplsLspFRNodeProtect, vRtrMplsLspAdminGroupInclude, vRtrMplsLspAdminGroupExclude, vRtrMplsLspAdaptive, vRtrMplsLspInheritance, vRtrMplsLspOptimizeTimer, vRtrMplsLspOperFastReroute, vRtrMplsLspFRObject, vRtrMplsLspOctets, vRtrMplsLspPackets, vRtrMplsLspAge, vRtrMplsLspTimeUp, vRtrMplsLspTimeDown, vRtrMplsLspPrimaryTimeUp, vRtrMplsLspTransitions, vRtrMplsLspLastTransition, vRtrMplsLspPathChanges, vRtrMplsLspLastPathChange, vRtrMplsLspConfiguredPaths, vRtrMplsLspStandbyPaths, vRtrMplsLspOperationalPaths, vRtrMplsLspHoldTimer, vRtrMplsLspPathTableSpinlock, vRtrMplsLspPathRowStatus, vRtrMplsLspPathLastChange, vRtrMplsLspPathType, vRtrMplsLspPathProperties, vRtrMplsLspPathBandwidth, vRtrMplsLspPathState, vRtrMplsLspPathPreference, vRtrMplsLspPathSetupPriority, vRtrMplsLspPathHoldPriority, vRtrMplsLspPathRecord, vRtrMplsLspPathHopLimit, vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState, vRtrMplsLspPathInheritance, vRtrMplsLspPathLspId, vRtrMplsLspPathRetryTimeRemaining, vRtrMplsLspPathTunnelARHopListIndex, vRtrMplsLspPathNegotiatedMTU, vRtrMplsLspPathFailCode, vRtrMplsLspPathFailNodeAddr, vRtrMplsLspPathAdminGroupInclude, vRtrMplsLspPathAdminGroupExclude, vRtrMplsLspPathAdaptive, vRtrMplsLspPathOptimizeTimer, vRtrMplsLspPathNextOptimize, vRtrMplsLspPathOperBandwidth, vRtrMplsLspPathResignal, vRtrMplsLspPathTunnelCRHopListIndex, vRtrMplsLspPathOperMTU, vRtrMplsLspPathRecordLabel, vRtrMplsLspPathTimeUp, vRtrMplsLspPathTimeDown, vRtrMplsLspPathRetryAttempts, vRtrMplsLspPathTransitionCount, vRtrMplsLspPathCspfQueries, vRtrMplsLspPathLastResigAttempt, vRtrMplsLspPathMetric, vRtrMplsLspPathLastMBBType, vRtrMplsLspPathLastMBBEnd, vRtrMplsLspPathLastMBBMetric, vRtrMplsLspPathLastMBBState, vRtrMplsLspPathMBBTypeInProg, vRtrMplsLspPathMBBStarted, vRtrMplsLspPathMBBNextRetry, vRtrMplsLspPathMBBRetryAttempts, vRtrMplsLspPathMBBFailCode, vRtrMplsLspPathMBBFailNodeArType, vRtrMplsLspPathMBBFailNodeAddr, vRtrMplsGeneralLastChange, vRtrMplsGeneralAdminState, vRtrMplsGeneralOperState, vRtrMplsGeneralNewLspIndex, vRtrMplsGeneralOptimizeTimer, vRtrMplsGeneralFRObject, vRtrMplsGeneralResignalTimer, vRtrMplsGeneralStaticLspOriginate, vRtrMplsGeneralStaticLspTransit, vRtrMplsGeneralStaticLspTerminate, vRtrMplsGeneralDynamicLspOriginate, vRtrMplsGeneralDynamicLspTransit, vRtrMplsGeneralDynamicLspTerminate, vRtrMplsGeneralDetourLspOriginate, vRtrMplsGeneralDetourLspTransit, vRtrMplsGeneralDetourLspTerminate, vRtrMplsGeneralHoldTimer, vRtrMplsGeneralDynamicBypass, vRtrMplsGeneralNextResignal, vRtrMplsGeneralOperDownReason, vRtrMplsGeneralSrlgFrr, vRtrMplsGeneralSrlgFrrStrict, vRtrMplsLspTemplatePropAdmGrp, vRtrMplsLabelMaxStaticLspLabels, vRtrMplsLabelMaxStaticSvcLabels, vRtrMplsS2lSubLspInterArea, vRtrMplsGenP2pActPathFastRetry, vRtrMplsGenP2mpS2lFastRetry, vRtrMplsS2lSubLspIsFastRetry, vRtrMplsLspPathTimeoutIn, vRtrMplsLspPathMBBTimeoutIn, vRtrMplsS2lSubLspTimeoutIn, vRtrMplsS2lSubLspMBBTimeoutIn, vRtrMplsLspPathOperSetupPriority, vRtrMplsLspPathOperHoldPriority, vRtrMplsLspPathOperRecord, vRtrMplsLspPathOperRecordLabel, vRtrMplsLspPathOperHopLimit, vRtrMplsLspPathOperAdminGrpIncl, vRtrMplsLspPathOperAdminGrExcld, vRtrMplsLspPathOperCspf, vRtrMplsLspPathOperLeastFill, vRtrMplsLspPathOperRsvpAdspec, vRtrMplsLspPathOperFRNodeProtect, vRtrMplsLspPathOperPropAdminGrp, vRtrMplsLspPathOperFRHopLimit, vRtrMplsGenLspInitRetryTimeout, vRtrMplsLspIgpShortcutLfaType, vRtrMplsLoggerEventBundling, vRtrMplsGenIssuMplsLockdown, vRtrMplsLspPropAdminGroup, vRtrMplsLspIgpShortcutRelOffset } STATUS obsolete DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 11.0 release." ::= { tmnxMplsGroups 52 } tmnxMplsV11v0ObsoleteGroup OBJECT-GROUP OBJECTS { vRtrMplsLspDecrementTtl, vRtrMplsLspClassOfService, vRtrMplsLspPathCos, vRtrMplsLspPathCosSource, vRtrMplsLspPathClassOfService, vRtrMplsLspBwProtect, vRtrMplsLspPathBwProtect, vRtrMplsLspPreference, vRtrMplsLspPathSharing, vRtrMplsGeneralPropagateTtl, vRtrMplsGeneralTE, vRtrMplsLspPathOperCspfToFrstLs, vRtrMplsLspCspfToFirstLoose } STATUS current DESCRIPTION "The group of obsolete objects which are no longer supported in MPLS 11.0R1 release onwards on Nokia SROS series systems." ::= { tmnxMplsGroups 53 } tmnxMplsLspTemplateGroup OBJECT-GROUP OBJECTS { vRtrMplsLspTemplateBgpShortcut, vRtrMplsLspTemplateIgpShortcut, vRtrMplsLspTemplateLdpOverRsvp, vRtrMplsLspTemplateLeastFill, vRtrMplsLspTemplateMetric, vRtrMplsLspTemplateSetupPriority, vRtrMplsLspTemplateHoldPriority, vRtrMplsLspTemplateVprnAutoBind, vRtrMplsLspTempIgpSCutLfaType, vRtrMplsLspTempIgpSCutRelOffset, vRtrMplsLspTempAutoBandwidth, vRtrMplsLspTempFRNodeProtect, vRtrMplsLspTempAutoBWTblLastChg, vRtrMplsLspTempAutoBWLastChg, vRtrMplsLspTempAutoBWAdjDNPer, vRtrMplsLspTempAutoBWAdjDNMbps, vRtrMplsLspTempAutoBWAdjUPPer, vRtrMplsLspTempAutoBWAdjUPMbps, vRtrMplsLspTempAutoBWMaxBW, vRtrMplsLspTempAutoBWMinBW, vRtrMplsLspTempAutoBWMntrBW, vRtrMplsLspTempAutoBWAdjMult, vRtrMplsLspTempAutoBWOverFlow, vRtrMplsLspTempAutoBWOvrFlwThr, vRtrMplsLspTempAutoBWOvrFlwBW, vRtrMplsLspTempAutoBWSampMult, vRtrMplsLspTempAutoBWSampTime, vRtrMplsLspTempAutoBWInherit, vRtrMplsLspTemplateEgrStats, vRtrMplsLspTempCollectStats, vRtrMplsLspTempAccntingPolicy, vRtrMplsTemplPlcyBindTblLastChg, vRtrMplsLspTemplPlcyBindLastChg, vRtrMplsLspTemplPlcyBindRowStat, vRtrMplsLspTemplPlcyBind1, vRtrMplsLspTemplPlcyBind2, vRtrMplsLspTemplPlcyBind3, vRtrMplsLspTemplPlcyBind4, vRtrMplsLspTemplPlcyBind5, vRtrMplsLspTemplPlcyBindOneHop, vRtrMplsLspTempAutoBWBeWeight, vRtrMplsLspTempAutoBWL2Weight, vRtrMplsLspTempAutoBWAfWeight, vRtrMplsLspTempAutoBWL1Weight, vRtrMplsLspTempAutoBWH2Weight, vRtrMplsLspTempAutoBWEfWeight, vRtrMplsLspTempAutoBWH1Weight, vRtrMplsLspTempAutoBWNcWeight, vRtrMplsLspTemplateFromAddrType, vRtrMplsLspTemplateFromAddr, vRtrMplsLspTemplateClassType, vRtrMplsLspTempBkupClassType, vRtrMplsLspTempBgpTransportTunn, vRtrMplsLspTempMainCTRetryLimit, vRtrMplsLspTemplateRsvpAdspec } STATUS current DESCRIPTION "The group of objects in MPLS supporting management of Lsp Template." ::= {tmnxMplsGroups 54 } tmnxMplsNotifyV11v0Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsLblRangeModify } STATUS obsolete DESCRIPTION "The group of notifications supporting the extended MPLS feature on Nokia SROS series systems 11.0 Release." ::= { tmnxMplsGroups 55 } tmnxMplsLspAutoBWFcWtGroup OBJECT-GROUP OBJECTS { vRtrMplsLspAutoBWBeWeight, vRtrMplsLspAutoBWL2Weight, vRtrMplsLspAutoBWAfWeight, vRtrMplsLspAutoBWL1Weight, vRtrMplsLspAutoBWH2Weight, vRtrMplsLspAutoBWEfWeight, vRtrMplsLspAutoBWH1Weight, vRtrMplsLspAutoBWNcWeight } STATUS current DESCRIPTION "The group of objects in MPLS supporting management of Forwarding-class Weights for Lsp Auto Bandwidth on Nokia SROS series systems." ::= { tmnxMplsGroups 56 } tmnxMplsGlobalV11v0R4Group OBJECT-GROUP OBJECTS { vRtrMplsLspStatsTpOnly, vRtrMplsGeneralMeshP2pOriginate, vRtrMplsGeneralOneHopP2pOrigin, vRtrMplsGenRetryOnIgpOverload } STATUS current DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 11.0 R4 release." ::= { tmnxMplsGroups 57 } tmnxMplsV12v0ObsoleteGroup OBJECT-GROUP OBJECTS { vRtrMplsLspBandwidth } STATUS current DESCRIPTION "The group of obsolete objects which are no longer supported in MPLS 12.0R1 release onwards on Nokia SROS series systems." ::= { tmnxMplsGroups 58 } tmnxMplsNotifyObjsIgpOverload OBJECT-GROUP OBJECTS { vRtrMplsIgpOverloadRtrAddrType, vRtrMplsIgpOverloadRtrAddr, vRtrMplsIgpOverloadIgpType } STATUS current DESCRIPTION "The group of notification objects supporting IGP shortcut notification feature on Nokia SROS series systems 11.0 Release." ::= { tmnxMplsGroups 59 } tmnxMplsIgpOverloadNotify NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsNodeInIgpOverload } STATUS current DESCRIPTION "The group of notifications supporting IGP shortcut notification feature on Nokia SROS series systems 11.0 Release." ::= { tmnxMplsGroups 60 } tmnxMplsLspTempInStatsGroup OBJECT-GROUP OBJECTS { vRtrMplsLspTempInStatTblLstChg, vRtrMplsLspTempInStatRowStatus, vRtrMplsLspTempInStatLastChanged, vRtrMplsLspTempInStatCollectStat, vRtrMplsLspTempInStatAccntPolicy, vRtrMplsLspTempInStatAdminState, vRtrMplsLspTempInStatMaxStats, vRtrMplsLspStatsLspType, vRtrMplsLspTempInStatTotlSession, vRtrMplsLspStatsEgrIndexUnAvail } STATUS current DESCRIPTION "The group of notification supporting MPLS Ingress Statistics for Template Based Label Switched Path (LSP) on Nokia SROS series systems 12.0 Release." ::= { tmnxMplsGroups 61 } tmnxMplsAutoBwUnderflowGroup OBJECT-GROUP OBJECTS { vRtrMplsLspAutoBWUnderFlow, vRtrMplsLspAutoBWUndFlwThreshold, vRtrMplsLspAutoBWUndFlwBW, vRtrMplsLspAutoBWUndFlwCount, vRtrMplsLspAutoBWMaxUndFlwBw, vRtrMplsLspTempAutoBWUnderFlow, vRtrMplsLspTempAutoBWUndFlwThr, vRtrMplsLspTempAutoBWUndFlwBW } STATUS current DESCRIPTION "The group of notification supporting MPLS Auto-Bandwidth underflow on Nokia SROS series systems 12.0 Release." ::= { tmnxMplsGroups 62 } tmnxMplsBgpLabelRetentionGroup OBJECT-GROUP OBJECTS { vRtrMplsLabelBgpLabelsHoldTimer } STATUS current DESCRIPTION "The group of notification supporting MPLS BGP Label Retention on Nokia SROS series systems 12.0 Release." ::= { tmnxMplsGroups 63 } tmnxMplsGlobalV12v0Group OBJECT-GROUP OBJECTS { vRtrMplsTunnelCHopUnnumIfID, vRtrMplsTunnelCHopRtrID, vRtrMplsTunnelCHopIsABR, vRtrMplsTunnelARHopUnnumIfID, vRtrMplsLspTemplatePropAdmGrp, vRtrMplsLabelMaxStaticLspLabels, vRtrMplsLabelMaxStaticSvcLabels, vRtrMplsS2lSubLspInterArea, vRtrMplsS2lSubLspIsFastRetry, vRtrMplsS2lSubLspTimeoutIn, vRtrMplsS2lSubLspMBBTimeoutIn, vRtrMplsLoggerEventBundling, vRtrMplsLspIgpShortcutRelOffset } STATUS obsolete DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 12.0 release." ::= { tmnxMplsGroups 64 } tmnxMplsBypassOptGroup OBJECT-GROUP OBJECTS { vRtrMplsGeneralBypassResigTimer, vRtrMplsGenBypassNextResignal } STATUS current DESCRIPTION "The group of objects supporting MPLS Bypass Optimization on Nokia SROS series systems 12.0 Release." ::= { tmnxMplsGroups 65 } tmnxMplsGenV12v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralLastChange, vRtrMplsGeneralAdminState, vRtrMplsGeneralOperState, vRtrMplsGeneralNewLspIndex, vRtrMplsGeneralOptimizeTimer, vRtrMplsGeneralFRObject, vRtrMplsGeneralResignalTimer, vRtrMplsGeneralStaticLspOriginate, vRtrMplsGeneralStaticLspTransit, vRtrMplsGeneralStaticLspTerminate, vRtrMplsGeneralDynamicLspOriginate, vRtrMplsGeneralDynamicLspTransit, vRtrMplsGeneralDynamicLspTerminate, vRtrMplsGeneralDetourLspOriginate, vRtrMplsGeneralDetourLspTransit, vRtrMplsGeneralDetourLspTerminate, vRtrMplsGeneralHoldTimer, vRtrMplsGeneralDynamicBypass, vRtrMplsGeneralNextResignal, vRtrMplsGeneralOperDownReason, vRtrMplsGeneralSrlgFrr, vRtrMplsGeneralSrlgFrrStrict, vRtrMplsGenMbbPrefCurrentHops, vRtrMplsGenP2pActPathFastRetry, vRtrMplsGenP2mpS2lFastRetry, vRtrMplsGenLspInitRetryTimeout, vRtrMplsGenIssuMplsLockdown } STATUS current DESCRIPTION "The group of all general objects in MPLS supporting management of MPLS features on Nokia SROS series systems 12.0 release." ::= { tmnxMplsGroups 66 } tmnxMplsLSPPathV12v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspPathTableSpinlock, vRtrMplsLspPathRowStatus, vRtrMplsLspPathLastChange, vRtrMplsLspPathType, vRtrMplsLspPathProperties, vRtrMplsLspPathBandwidth, vRtrMplsLspPathState, vRtrMplsLspPathPreference, vRtrMplsLspPathSetupPriority, vRtrMplsLspPathHoldPriority, vRtrMplsLspPathRecord, vRtrMplsLspPathHopLimit, vRtrMplsLspPathAdminState, vRtrMplsLspPathOperState, vRtrMplsLspPathInheritance, vRtrMplsLspPathLspId, vRtrMplsLspPathRetryTimeRemaining, vRtrMplsLspPathTunnelARHopListIndex, vRtrMplsLspPathNegotiatedMTU, vRtrMplsLspPathFailCode, vRtrMplsLspPathFailNodeAddr, vRtrMplsLspPathAdminGroupInclude, vRtrMplsLspPathAdminGroupExclude, vRtrMplsLspPathAdaptive, vRtrMplsLspPathOptimizeTimer, vRtrMplsLspPathNextOptimize, vRtrMplsLspPathOperBandwidth, vRtrMplsLspPathResignal, vRtrMplsLspPathTunnelCRHopListIndex, vRtrMplsLspPathOperMTU, vRtrMplsLspPathRecordLabel, vRtrMplsLspPathTimeUp, vRtrMplsLspPathTimeDown, vRtrMplsLspPathRetryAttempts, vRtrMplsLspPathTransitionCount, vRtrMplsLspPathCspfQueries, vRtrMplsLspPathLastResigAttempt, vRtrMplsLspPathMetric, vRtrMplsLspPathLastMBBType, vRtrMplsLspPathLastMBBEnd, vRtrMplsLspPathLastMBBMetric, vRtrMplsLspPathLastMBBState, vRtrMplsLspPathMBBTypeInProg, vRtrMplsLspPathMBBStarted, vRtrMplsLspPathMBBNextRetry, vRtrMplsLspPathMBBRetryAttempts, vRtrMplsLspPathMBBFailCode, vRtrMplsLspPathMBBFailNodeArType, vRtrMplsLspPathMBBFailNodeAddr, vRtrMplsLspPathOperInterArea, vRtrMplsLspPathChanges, vRtrMplsLspPathTimeoutIn, vRtrMplsLspPathMBBTimeoutIn, vRtrMplsLspPathOperSetupPriority, vRtrMplsLspPathOperHoldPriority, vRtrMplsLspPathOperRecord, vRtrMplsLspPathOperRecordLabel, vRtrMplsLspPathOperHopLimit, vRtrMplsLspPathOperAdminGrpIncl, vRtrMplsLspPathOperAdminGrExcld, vRtrMplsLspPathOperCspf, vRtrMplsLspPathOperLeastFill, vRtrMplsLspPathOperRsvpAdspec, vRtrMplsLspPathOperFRNodeProtect, vRtrMplsLspPathOperPropAdminGrp, vRtrMplsLspPathOperFRHopLimit } STATUS current DESCRIPTION "The group of all LSP Path objects in MPLS supporting management of MPLS features on Nokia SROS series systems 12.0 release." ::= { tmnxMplsGroups 67 } tmnxMplsLSPV12v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspRowStatus, vRtrMplsLspLastChange, vRtrMplsLspName, vRtrMplsLspAdminState, vRtrMplsLspOperState, vRtrMplsLspFromAddr, vRtrMplsLspToAddr, vRtrMplsLspType, vRtrMplsLspOutSegIndx, vRtrMplsLspRetryTimer, vRtrMplsLspRetryLimit, vRtrMplsLspMetric, vRtrMplsLspCspf, vRtrMplsLspFastReroute, vRtrMplsLspFRHopLimit, vRtrMplsLspFRBandwidth, vRtrMplsLspSetupPriority, vRtrMplsLspHoldPriority, vRtrMplsLspRecord, vRtrMplsLspHopLimit, vRtrMplsLspNegotiatedMTU, vRtrMplsLspRsvpResvStyle, vRtrMplsLspRsvpAdspec, vRtrMplsLspFRMethod, vRtrMplsLspFRNodeProtect, vRtrMplsLspAdminGroupInclude, vRtrMplsLspAdminGroupExclude, vRtrMplsLspAdaptive, vRtrMplsLspInheritance, vRtrMplsLspOptimizeTimer, vRtrMplsLspOperFastReroute, vRtrMplsLspFRObject, vRtrMplsLspOctets, vRtrMplsLspPackets, vRtrMplsLspAge, vRtrMplsLspTimeUp, vRtrMplsLspTimeDown, vRtrMplsLspPrimaryTimeUp, vRtrMplsLspTransitions, vRtrMplsLspLastTransition, vRtrMplsLspLastPathChange, vRtrMplsLspConfiguredPaths, vRtrMplsLspStandbyPaths, vRtrMplsLspOperationalPaths, vRtrMplsLspHoldTimer, vRtrMplsLspIgpShortcutLfaType, vRtrMplsLspPropAdminGroup, vRtrMplsLspIgpShortcutRelOffset, vRtrMplsLspRevertTimer, vRtrMplsLspRevertTimeRemain } STATUS current DESCRIPTION "The group of all LSP objects in MPLS supporting management of MPLS features on Nokia SROS series systems 12.0 release." ::= { tmnxMplsGroups 68 } tmnxMplsObsoleteNotifyV12Group NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsLblRangeModify } STATUS current DESCRIPTION "The group of obsolete notifications supporting management of the MPLS operations on Nokia 7xxx SR series systems." ::= { tmnxMplsGroups 69 } tmnxMplsLoadBalanceWtV13v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspLoadBalancingWeight, vRtrMplsLspTempLoadBalancingWt } STATUS current DESCRIPTION "The group of all objects in MPLS supporting management of load balancing on Nokia SROS series systems 13.0 relase." ::= { tmnxMplsGroups 70 } tmnxMplsLabelSegRouteV13v0Group OBJECT-GROUP OBJECTS { vRtrMplsLabelSegRouteStartLabel, vRtrMplsLabelSegRouteEndLabel } STATUS current DESCRIPTION "The group of all objects in MPLS supporting management of segment routing labels on Nokia SROS series systems 13.0 relase." ::= { tmnxMplsGroups 71 } tmnxMplsLabelStaticRgeV13v0Group OBJECT-GROUP OBJECTS { vRtrMplsLabelStaticLabelRange } STATUS current DESCRIPTION "The group of all objects in MPLS supporting management of static label range on Nokia SROS series systems 13.0 relase." ::= { tmnxMplsGroups 72 } tmnxMpls13v0ObsoleteGroup OBJECT-GROUP OBJECTS { vRtrMplsLabelMaxStaticLspLabels, vRtrMplsLabelMaxStaticSvcLabels } STATUS current DESCRIPTION "The group of obsolete objects which are no longer supported in MPLS 13.0R1 release onwards on Nokia SROS series systems." ::= { tmnxMplsGroups 73 } tmnxMplsGlobalV13v0Group OBJECT-GROUP OBJECTS { vRtrMplsTunnelCHopUnnumIfID, vRtrMplsTunnelCHopRtrID, vRtrMplsTunnelCHopIsABR, vRtrMplsTunnelARHopUnnumIfID, vRtrMplsLspTemplatePropAdmGrp, vRtrMplsS2lSubLspInterArea, vRtrMplsS2lSubLspIsFastRetry, vRtrMplsS2lSubLspTimeoutIn, vRtrMplsS2lSubLspMBBTimeoutIn, vRtrMplsLoggerEventBundling, vRtrMplsLspIgpShortcutRelOffset } STATUS current DESCRIPTION "The group of all global objects in MPLS supporting management of MPLS features on Nokia SROS series systems 12.0 release." ::= { tmnxMplsGroups 74 } tmnxMplsClassBasedFwdV13v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspClassFwdingEnabled, vRtrMplsLspFC, vRtrMplsLspTempClassFwdEnabled, vRtrMplsLspTempFC } STATUS current DESCRIPTION "The group of all objects in MPLS supporting class based forwarding on Nokia SROS series systems 13.0 relase." ::= { tmnxMplsGroups 75 } tmnxMplsBfdOnLspV13v0Group OBJECT-GROUP OBJECTS { vRtrMplsLspBfdTemplateName, vRtrMplsLspBfdEnable, vRtrMplsLspBfdPingIntvl, vRtrMplsLspPathBfdTemplateName, vRtrMplsLspPathBfdEnable, vRtrMplsLspPathBfdPingIntvl, vRtrMplsLspTempBfdTemplateName, vRtrMplsLspTempBfdEnable, vRtrMplsLspTempBfdPingIntvl } STATUS current DESCRIPTION "The group of objects in MPLS supporting management of MPLS features on Nokia SROS series systems 13.0 release." ::= { tmnxMplsGroups 76 } tmnxMplsAdminGroupObsoleteGroup OBJECT-GROUP OBJECTS { vRtrMplsAdminGroupRowStatus, vRtrMplsAdminGroupValue } STATUS current DESCRIPTION "The group of obsolete objects which are no longer supported in MPLS 14.0R1 release onwards on Nokia SROS series systems." ::= { tmnxMplsGroups 77 } tmnxMplsIfSrlgV14v0Group OBJECT-GROUP OBJECTS { vRtrMplsIfSrlgGrpTblLastChanged, vRtrMplsIfSrlgGrpRowStatus, vRtrMplsIfSrlgGrpLastChanged } STATUS current DESCRIPTION "The group of objects supporting management of SRLG on Nokia 7xxx SR series systems release 6.0." ::= { tmnxMplsGroups 78 } tmnxMplsSrlgObsoleteGroup OBJECT-GROUP OBJECTS { vRtrMplsSrlgGrpTableLastChanged, vRtrMplsSrlgGrpRowStatus, vRtrMplsSrlgGrpLastChanged, vRtrMplsSrlgGrpValue } STATUS current DESCRIPTION "The group of objects supporting management of SRLG on Nokia 7xxx SR series systems release 6.0." ::= { tmnxMplsGroups 79 } tmnxMplsSegRouting14v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralNewLspSRIndex, vRtrMplsGeneralSrTeLspOriginate, vRtrMplsGeneralPceReport, vRtrMplsLspExtPceCompute, vRtrMplsLspExtPceControl, vRtrMplsLspExtPceReport, vRtrMplsLspExtTtmTunnelId, vRtrMplsLspExtMaxSrLabels, vRtrMplsLspExtTunnelId, vRtrMplsLspPathProfTblLstChg, vRtrMplsLspPathProfRowStatus, vRtrMplsLspPathProfLastChange, vRtrMplsLspPathProfGroupId, vRtrMplsLspPathLastUpdateTime, vRtrMplsLspPathLastUpdateId, vRtrMplsLspPathLastUpdateState, vRtrMplsLspPathLastUpdFailCode } STATUS current DESCRIPTION "The group of objects in MPLS supporting Segment Routing TE of MPLS features on Nokia SROS series systems 14.0 release." ::= { tmnxMplsGroups 80 } tmnxMplsEntropyLabel14v0Group OBJECT-GROUP OBJECTS { vRtrMplsGeneralEntropyLblRsvpTe, vRtrMplsLspExtEntropyLabel, vRtrMplsLspExtOperEntropyLabel, vRtrMplsLspExtNegEntropyLbl } STATUS current DESCRIPTION "The group of objects in MPLS supporting entropy label of MPLS features on Nokia SROS series systems 14.0 release." ::= { tmnxMplsGroups 81 } tmnxMplsLspTemplEL14v4Group OBJECT-GROUP OBJECTS { vRtrMplsLspTempEntropyLabel } STATUS current DESCRIPTION "The group of objects in MPLS supporting entropy label of MPLS features on Nokia SROS series systems 14.0 release." ::= { tmnxMplsGroups 82 } tmnxMplsSRLfaOvrhd14v4Group OBJECT-GROUP OBJECTS { vRtrMplsLspExtFrrOverheadLabel } STATUS current DESCRIPTION "The group of objects in MPLS supporting segment routing MPLS features on Nokia SROS series systems 14.0 release." ::= { tmnxMplsGroups 83 } END