-- This file was included in WWP MIB release 04-10-01-0027 -- -- CIENA-CES-LDP-MIB.my -- CIENA-CES-LDP-MIB DEFINITIONS ::= BEGIN IMPORTS TimeTicks, Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, IpAddress FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus, TruthValue FROM SNMPv2-TC MplsLdpIdentifier FROM MPLS-TC-STD-MIB CienaGlobalState FROM CIENA-TC cienaCesConfig,cienaCesNotifications FROM CIENA-SMI; cienaCesLdpMIB MODULE-IDENTITY LAST-UPDATED "201102020000Z" ORGANIZATION "Ciena, Inc" CONTACT-INFO " Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com" DESCRIPTION "This MIB module is for the Extension of the LDP MIB for CIENA Products" REVISION "201102020000Z" DESCRIPTION "Initial version." ::= { cienaCesConfig 17 } -- -- Node definitions -- cienaCesLdpMIBObjects OBJECT IDENTIFIER ::= { cienaCesLdpMIB 1 } cienaCesLdpObjects OBJECT IDENTIFIER ::= { cienaCesLdpMIBObjects 1 } cienaCesLdp OBJECT IDENTIFIER ::= { cienaCesLdpMIBObjects 2 } -- -- Global objects -- cienaCesLdpAdminStatus OBJECT-TYPE SYNTAX CienaGlobalState MAX-ACCESS read-only STATUS current DESCRIPTION "Globally enable/disable LDP" ::= { cienaCesLdpObjects 1 } cienaCesLdpOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational state of LDP" ::= { cienaCesLdpObjects 2 } cienaCesLdpHelloHoldTime OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The 16-bit integer value which is the proposed global hello hold timer (in seconds) for LDP. An LSR maintains a record of Hellos received from potential peers. This object represents the Hold Time in the Common Hello Parameters TLV of the Hello Message. A value of 65535 means infinite (i.e., wait forever). All other values represent the amount of time in seconds to wait for a Hello Message. Setting the hold time to a value smaller than 15 is not recommended, although not forbidden according to RFC3036." ::= { cienaCesLdpObjects 3 } cienaCesLdpKeepAliveHoldTime OBJECT-TYPE SYNTAX Unsigned32 (1..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The 16-bit integer value which is the proposed global keep alive hold timer for LDP." ::= { cienaCesLdpObjects 4 } -- -- The CIENA MPLS LDP Sessions Table. It augments MPLS LDP Sessions Table -- cienaCesLdpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Sessions between the LDP Entities and LDP Peers. Each row in this table represents a single session." ::= { cienaCesLdp 1 } cienaCesLdpSessionEntry OBJECT-TYPE SYNTAX CienaCesLdpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents information on a single session between an LDP Entity and LDP Peer. The information contained in a row is read-only. Please note: the Path Vector Limit for the Session is the value which is configured in the corresponding mplsLdpEntityEntry. The Peer's Path Vector Limit is in the mplsLdpPeerPathVectorLimit object in the mplsLdpPeerTable. Values which may differ from those configured are noted in the objects of this table, the mplsLdpAtmSessionTable and the mplsLdpFrameRelaySessionTable. A value will differ if it was negotiated between the Entity and the Peer. Values may or may not be negotiated. For example, if the values are the same then no negotiation takes place. If they are negotiated, then they may differ." INDEX { cienaCesLdpEntityLdpId, cienaCesLdpEntityIndex, cienaCesLdpPeerLdpId } ::= { cienaCesLdpSessionTable 1 } CienaCesLdpSessionEntry ::= SEQUENCE { cienaCesLdpEntityLdpId MplsLdpIdentifier, cienaCesLdpEntityIndex Unsigned32, cienaCesLdpPeerLdpId MplsLdpIdentifier, cienaCesLdpSessionConfiguredHoldTime Unsigned32, cienaCesLdpSessionPeerHoldTime Unsigned32, cienaCesLdpSessionHoldTimeInUse Unsigned32 } cienaCesLdpEntityLdpId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LDP identifier. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR." REFERENCE "RFC3036, LDP Specification, Section on LDP Identifiers." ::= { cienaCesLdpSessionEntry 1 } cienaCesLdpEntityIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This index is used as a secondary index to uniquely identify this row. A secondary index (this object) is meaningful to some but not all, LDP implementations. For example an LDP implementation which uses PPP would use this index to differentiate PPP sub-links. Another way to use this index is to give this the value of ifIndex." ::= { cienaCesLdpSessionEntry 2 } cienaCesLdpPeerLdpId OBJECT-TYPE SYNTAX MplsLdpIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LDP identifier of this LDP Peer." ::= { cienaCesLdpSessionEntry 3 } cienaCesLdpSessionConfiguredHoldTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The locally configured keepalive hold time for this session, in seconds. Note that the value of this field reflects configuration at the time of session initialization; this may differ from the configuration that would apply to a new session, if configuration has changed since this session was initialized." ::= { cienaCesLdpSessionEntry 4 } cienaCesLdpSessionPeerHoldTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's advertised keepalive hold time for this session in seconds. Note that the value of this field reflects the peer's configuration at the time of session initialization; this may differ from the configuration that would apply to a new session, if the peer's configuration has changed since this session was initialized." ::= { cienaCesLdpSessionEntry 5 } cienaCesLdpSessionHoldTimeInUse OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The keepalive hold time that is currently in use for this session, in seconds." ::= { cienaCesLdpSessionEntry 6 } cienaCesLdpHelloAdjacencyTable OBJECT-TYPE SYNTAX SEQUENCE OF CienaCesLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Hello Adjacencies for Sessions." ::= { cienaCesLdp 2 } cienaCesLdpHelloAdjacencyEntry OBJECT-TYPE SYNTAX CienaCesLdpHelloAdjacencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello Adjacencies." INDEX { cienaCesLdpEntityLdpId, cienaCesLdpEntityIndex, cienaCesLdpPeerLdpId, cienaCesLdpHelloAdjacencyIndex } ::= { cienaCesLdpHelloAdjacencyTable 1 } CienaCesLdpHelloAdjacencyEntry ::= SEQUENCE { cienaCesLdpHelloAdjacencyIndex Unsigned32, cienaCesLdpHelloAdjacencyConfiguredHoldTime Unsigned32, cienaCesLdpHelloAdjacencyPeerHoldTime Unsigned32 } cienaCesLdpHelloAdjacencyIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An identifier for this specific adjacency." ::= { cienaCesLdpHelloAdjacencyEntry 1 } cienaCesLdpHelloAdjacencyConfiguredHoldTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The locally configured hello hold time for this adjacency, in seconds." ::= { cienaCesLdpHelloAdjacencyEntry 2 } cienaCesLdpHelloAdjacencyPeerHoldTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's advertised hello hold time for this adjacency, in seconds." ::= { cienaCesLdpHelloAdjacencyEntry 3 } END -- -- CIENA-CES-LDP-MIB --