F5-OS-LLDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32 FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF l2networks FROM F5-OS-PLATFORM-SMI-MIB ; --================================================================ f5OSLldp MODULE-IDENTITY LAST-UPDATED "202212200000Z" ORGANIZATION "F5 Inc." CONTACT-INFO "postal: F5 Inc. 801 Fifth Avenue Seattle, WA 98104 phone: (206) 272-6500 email: support@f5.com" DESCRIPTION "Top-level infrastructure of the F5 enterprise MIB tree." ::= { l2networks 1 } --================================================================ f5OSLldpObjects OBJECT IDENTIFIER ::= { f5OSLldp 1 } lldpConfiguration OBJECT IDENTIFIER ::= { f5OSLldpObjects 1 } lldpState OBJECT IDENTIFIER ::= { f5OSLldpObjects 2 } lldpIfConfig OBJECT IDENTIFIER ::= { f5OSLldpObjects 3 } lldpNeighbors OBJECT IDENTIFIER ::= { f5OSLldpObjects 4 } --================================================================== -- LLDP Configuration --================================================================== lldpConfigurationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates system LLDP configuration is enable or not." ::= { lldpConfiguration 1 } lldpMessageTxInterval OBJECT-TYPE SYNTAX Integer32 (5..32768) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpMessageTxInterval object is 30 seconds." DEFVAL { 30 } ::= { lldpConfiguration 2 } lldpMessageTxHoldMultiplier OBJECT-TYPE SYNTAX Integer32 (2..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The time-to-live value expressed as a multiple of the lldpMessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf of this LLDP agent, can be expressed by the following formula: TTL = min(65535, (lldpMessageTxInterval * lldpMessageTxHoldMultiplier)) For example, if the value of lldpMessageTxInterval is '30', and the value of lldpMessageTxHoldMultiplier is '4', then the value '120' is encoded in the TTL field in the LLDP header. The default value for lldpMessageTxHoldMultiplier object is 4." DEFVAL { 4 } ::= { lldpConfiguration 3 } lldpReinitDelay OBJECT-TYPE SYNTAX Integer32 (1..10) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The lldpReinitDelay indicates the delay (in units of seconds) from when lldpIfTlvAdvertisement object of a particular port becomes 'disabled' until re-initialization will be attempted. The default value for lldpReintDelay object is two seconds." DEFVAL { 2 } ::= { lldpConfiguration 4 } lldpTxDelay OBJECT-TYPE SYNTAX Integer32 (1..8192) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. The default value for lldpTxDelay object is two seconds." DEFVAL { 2 } ::= { lldpConfiguration 5 } lldpMaxNeighborsPerPort OBJECT-TYPE SYNTAX Integer32 (1..10) UNITS "neighbor" MAX-ACCESS read-write STATUS current DESCRIPTION "The lldpMaxNeighborsPerPort indicates the limit of Maximum LLDP neighbors per port. The default value for lldpMaxNeighborsPerPort object is 10." DEFVAL { 10 } ::= { lldpConfiguration 6 } --================================================================== -- Lldp Statistics --================================================================== lldpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates system LLDP configuration is enable or not." ::= { lldpState 1 } lldpSystemId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the system serial number." ::= { lldpState 2 } lldpNeighborsNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LLDP Neighbors connected to the system." ::= { lldpState 3 } --================================================================== -- Lldp Interface configuration --================================================================== lldpIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information of LLDP interface configuration." ::= { lldpIfConfig 1 } lldpIfConfigEntry OBJECT-TYPE SYNTAX LldpIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Columns in the LldpInterfaceConfigTable" INDEX { lldpIfName } ::= { lldpIfConfigTable 1 } LldpIfConfigEntry ::= SEQUENCE { lldpIfName DisplayString, lldpIfEnabled TruthValue, lldpIfTlvAdvertisement INTEGER, lldpIfTlvmap Integer32 } lldpIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The port name of LLDP Interface configuration." ::= { lldpIfConfigEntry 1 } lldpIfEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP configuration is enabled/disabled for interface." ::= { lldpIfConfigEntry 2 } lldpIfTlvAdvertisement OBJECT-TYPE SYNTAX INTEGER { none(0), txonly(1), rxonly(2), txrx(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP interface tlv advertisement configuration." ::= { lldpIfConfigEntry 3 } lldpIfTlvmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP interface tlvmap configuration." ::= { lldpIfConfigEntry 4 } --================================================================== -- Lldp neighbors --================================================================== lldpNeighborsTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpNeighborsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information of LLDP neighbors." ::= { lldpNeighbors 1 } lldpNeighborsEntry OBJECT-TYPE SYNTAX LldpNeighborsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Columns in the LldpNeighborsTable" INDEX { lldpLocalInterface, lldpNeighborPortId } ::= { lldpNeighborsTable 1 } LldpNeighborsEntry ::= SEQUENCE { lldpLocalInterface DisplayString, lldpNeighborPortId DisplayString, lldpNeighborChassisId DisplayString, lldpNeighborPortDesc DisplayString, lldpNeighborSysName DisplayString, lldpNeighborSysDesc DisplayString, lldpNeighborSysCap Gauge32, lldpNeighborMgmtAddr DisplayString, lldpNeighborPvid Integer32, lldpNeighborPpvid Integer32, lldpNeighborVlanName DisplayString, lldpNeighborVlanTag Integer32, lldpNeighborProtocolIdentity Integer32, lldpNeighborAutoNego Integer32, lldpNeighborPmd Integer32, lldpNeighborMau Integer32, lldpNeighborAggStatus Integer32, lldpNeighborAggPortid Gauge32, lldpNeighborMfs Integer32, lldpNeighborF5ProductModel DisplayString } lldpLocalInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The local port ID to which the LLDP neighbor is connected." ::= { lldpNeighborsEntry 1 } lldpNeighborPortId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port ID of the LLDP neighbor." ::= { lldpNeighborsEntry 2 } lldpNeighborChassisId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis ID of the LLDP neighbor." ::= { lldpNeighborsEntry 3 } lldpNeighborPortDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the port on the LLDP neighbor." ::= { lldpNeighborsEntry 4 } lldpNeighborSysName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The system name of the LLDP neighbor." ::= { lldpNeighborsEntry 5 } lldpNeighborSysDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the LLDP neighbor." ::= { lldpNeighborsEntry 6 } lldpNeighborSysCap OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System capabilities of the LLDP neighbor (switching, routing, etc.)" ::= { lldpNeighborsEntry 7 } lldpNeighborMgmtAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Management IP address of the LLDP neighbor." ::= { lldpNeighborsEntry 8 } lldpNeighborPvid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID associated with the port on the LLDP neighbor." ::= { lldpNeighborsEntry 9 } lldpNeighborPpvid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a PPVID TLV has been received by the LLDP neighbor." ::= { lldpNeighborsEntry 10 } lldpNeighborVlanName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN name associated with the port on the LLDP neighbor." ::= { lldpNeighborsEntry 11 } lldpNeighborVlanTag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN tag associated with the port on the LLDP neighbor." ::= { lldpNeighborsEntry 12 } lldpNeighborProtocolIdentity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a Protocol Identity TLV has been received by the LLDP neighbor." ::= { lldpNeighborsEntry 13 } lldpNeighborAutoNego OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC/PHY Auto-Negotiation status of the LLDP neighbor." ::= { lldpNeighborsEntry 14 } lldpNeighborPmd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC/PHY Physical Medium Dependant (PMD) capability of the LLDP neighbor." ::= { lldpNeighborsEntry 15 } lldpNeighborMau OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC/PHY Medium Attachment Unit (MAU) type of the LLDP neighbor." ::= { lldpNeighborsEntry 16 } lldpNeighborAggStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Link aggregation status/capability of LLDP neighbor port." ::= { lldpNeighborsEntry 17 } lldpNeighborAggPortid OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "If the remote port is aggregated, indicates the aggregated port ID on the LLDP neighbor." ::= { lldpNeighborsEntry 18 } lldpNeighborMfs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum frame size of the LLDP neighbor's MAC and PHY implementation." ::= { lldpNeighborsEntry 19 } lldpNeighborF5ProductModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the F5 product model name if the LLDP neighbor is an F5 product." ::= { lldpNeighborsEntry 20 } -- -- Platform Groups -- platformConformance OBJECT IDENTIFIER ::= { f5OSLldp 2 } platformGroups OBJECT IDENTIFIER ::= { platformConformance 1 } platformCompliances OBJECT IDENTIFIER ::= { platformConformance 2 } platformCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which have LLDP statistics." MODULE MANDATORY-GROUPS { lldpConfigGroup, lldpStateGroup, lldpIfConfigGroup, lldpNeighborsTableGroup } ::= { platformCompliances 1 } lldpConfigGroup OBJECT-GROUP OBJECTS { lldpConfigurationEnabled, lldpMessageTxInterval, lldpMessageTxHoldMultiplier, lldpReinitDelay, lldpTxDelay, lldpMaxNeighborsPerPort } STATUS current DESCRIPTION "A collection of objects of LLDP Configuration." ::= { platformGroups 1 } lldpStateGroup OBJECT-GROUP OBJECTS { lldpEnabled, lldpSystemId, lldpNeighborsNumber } STATUS current DESCRIPTION "A collection of objects of LLDP state." ::= { platformGroups 2 } lldpIfConfigGroup OBJECT-GROUP OBJECTS { lldpIfName, lldpIfEnabled, lldpIfTlvAdvertisement, lldpIfTlvmap } STATUS current DESCRIPTION "A collection of objects of LLDP interface configuration." ::= { platformGroups 3 } lldpNeighborsTableGroup OBJECT-GROUP OBJECTS { lldpLocalInterface, lldpNeighborPortId, lldpNeighborChassisId, lldpNeighborPortDesc, lldpNeighborSysName, lldpNeighborSysDesc, lldpNeighborSysCap, lldpNeighborMgmtAddr, lldpNeighborPvid, lldpNeighborPpvid, lldpNeighborVlanName, lldpNeighborVlanTag, lldpNeighborProtocolIdentity, lldpNeighborAutoNego, lldpNeighborPmd, lldpNeighborMau, lldpNeighborAggStatus, lldpNeighborAggPortid, lldpNeighborMfs, lldpNeighborF5ProductModel } STATUS current DESCRIPTION "A collection of objects of lldpNeighbors MIB." ::= { platformGroups 4 } END