FORCEPOINT-NGFW-ENGINE-MIB DEFINITIONS ::= BEGIN -- SUBTREE: 1.3.6.1.4.1.47565.1.1 -- iso.org.dod.internet.private.enterprises.forcepoint.ngfw.engine IMPORTS enterprises, Integer32, Counter32, Counter64, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TimeStamp, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF InetAddressIPv4, InetAddressIPv6 FROM INET-ADDRESS-MIB CounterBasedGauge64 FROM HCNUM-TC; forcepointNGFWEngineMib MODULE-IDENTITY LAST-UPDATED "202409060000Z" ORGANIZATION "Forcepoint LLC" CONTACT-INFO "email: mib.stonesoft@forcepoint.com" DESCRIPTION "Top level enterprise MIB for Forcepoint NGFW" REVISION "202409060000Z" DESCRIPTION "Added fwInspectionPercentageUsed" REVISION "202409020000Z" DESCRIPTION "Added fwInspectionBytesUsed" REVISION "202403280000Z" DESCRIPTION "Added fwIfStatsProcTable" REVISION "202112110000Z" DESCRIPTION "First public revision" ::= { enterprises 47565 1 1 } engineNotifications OBJECT IDENTIFIER ::= { forcepointNGFWEngineMib 0 } engineObjects OBJECT IDENTIFIER ::= { forcepointNGFWEngineMib 1 } engineGroups OBJECT IDENTIFIER ::= { forcepointNGFWEngineMib 2 } -- -- Firewall objects -- fwSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version string of the firewall software" ::= { engineObjects 1 } fwSecurityPolicy OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the current security policy on the firewall" ::= { engineObjects 2 } fwPolicyTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the security policy was installed to the firewall" ::= { engineObjects 3 } -- interface related objects fwIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FwIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each interface in system" ::= { engineObjects 10 } -- Statistics fwIfStatsEntry OBJECT-TYPE SYNTAX FwIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for an interface" INDEX { fwIfStatsIndex } ::= { fwIfStatsTable 1 } FwIfStatsEntry ::= SEQUENCE { fwIfStatsIndex INTEGER, fwIfName DisplayString, fwIfAcceptedPkts Counter64, fwIfDroppedPkts Counter64, fwIfLoggedPkts Counter64, fwIfAccountedPkts Counter64, fwIfRejectedPkts Counter64, fwIfAcceptedBytes Counter64, fwIfDroppedBytes Counter64, fwIfLoggedBytes Counter64, fwIfAccountedBytes Counter64, fwIfRejectedBytes Counter64, fwIfForwardedPkts Counter64, fwIfForwardedBytes Counter64, fwIfComment DisplayString } fwIfStatsIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each interface or interface sub-layer in the managed system." ::= { fwIfStatsEntry 1 } fwIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of interface" ::= { fwIfStatsEntry 2 } fwIfAcceptedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of accepted packets by firewall rules" ::= { fwIfStatsEntry 3 } fwIfDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped packets by firewall rules" ::= { fwIfStatsEntry 4 } fwIfLoggedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of logged packets by firewall rules" ::= { fwIfStatsEntry 5 } fwIfAccountedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of accounted packets by firewall rules" ::= { fwIfStatsEntry 6 } fwIfRejectedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rejected packets by firewall rules" ::= { fwIfStatsEntry 7 } fwIfAcceptedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of accepted bytes by firewall rules" ::= { fwIfStatsEntry 8 } fwIfDroppedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped bytes by firewall rules" ::= { fwIfStatsEntry 9 } fwIfLoggedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of logged bytes by firewall rules" ::= { fwIfStatsEntry 10 } fwIfAccountedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of accounted bytes by firewall rules" ::= { fwIfStatsEntry 11 } fwIfRejectedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rejected bytes by firewall rules" ::= { fwIfStatsEntry 12 } fwIfForwardedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of forwarded packets by firewall rules" ::= { fwIfStatsEntry 13 } fwIfForwardedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of forwarded bytes by firewall rules" ::= { fwIfStatsEntry 14 } fwIfComment OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Comment of interface" ::= { fwIfStatsEntry 15 } -- VPN end-point related objects VpnEndpointType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value that represents the type of the remote VPN end-point. unknown(0) The type of the remote VPN end-point is not known. static(1) The remote VPN end-point has a static IP address. dynamic(2) The remote VPN end-point has a dynamic IP address. mobile(3) The remote is a mobile VPN client." SYNTAX INTEGER { unknown(0), static(1), dynamic(2), mobile(3) } -- IPv4 end-points -- fwVpnEp4Table OBJECT-TYPE SYNTAX SEQUENCE OF FwVpnEp4Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each IPv4 VPN end-point pair" ::= { engineObjects 12 } fwVpnEp4Entry OBJECT-TYPE SYNTAX FwVpnEp4Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for an IPv4 VPN end-point pair" INDEX { fwVpnEp4Index } ::= { fwVpnEp4Table 1 } FwVpnEp4Entry ::= SEQUENCE { fwVpnEp4Index INTEGER, fwVpnEp4Local InetAddressIPv4, fwVpnEp4Remote InetAddressIPv4, fwVpnEp4RemoteType VpnEndpointType, fwVpnEp4ReceivedBytes Counter64, fwVpnEp4SentBytes Counter64, fwVpnEp4IpsecSa Counter32 } fwVpnEp4Index OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each end-point pair." ::= { fwVpnEp4Entry 1 } fwVpnEp4Local OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "Local IPv4 end-point address" ::= { fwVpnEp4Entry 2 } fwVpnEp4Remote OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote IPv4 end-point address" ::= { fwVpnEp4Entry 3 } fwVpnEp4RemoteType OBJECT-TYPE SYNTAX VpnEndpointType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote VPN end-point" ::= { fwVpnEp4Entry 4 } fwVpnEp4ReceivedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received bytes between the end-point pair" ::= { fwVpnEp4Entry 5 } fwVpnEp4SentBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sent bytes between the end-point pair" ::= { fwVpnEp4Entry 6 } fwVpnEp4IpsecSa OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of currently established IPsec SAs between the end-point pair" ::= { fwVpnEp4Entry 7 } -- IPv6 end-points -- fwVpnEp6Table OBJECT-TYPE SYNTAX SEQUENCE OF FwVpnEp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each IPv6 VPN end-point pair" ::= { engineObjects 13 } fwVpnEp6Entry OBJECT-TYPE SYNTAX FwVpnEp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for an IPv6 VPN end-point pair" INDEX { fwVpnEp6Index } ::= { fwVpnEp6Table 1 } FwVpnEp6Entry ::= SEQUENCE { fwVpnEp6Index INTEGER, fwVpnEp6Local InetAddressIPv6, fwVpnEp6Remote InetAddressIPv6, fwVpnEp6RemoteType VpnEndpointType, fwVpnEp6ReceivedBytes Counter64, fwVpnEp6SentBytes Counter64, fwVpnEp6IpsecSa Counter32 } fwVpnEp6Index OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each end-point pair." ::= { fwVpnEp6Entry 1 } fwVpnEp6Local OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "Local IPv6 end-point address" ::= { fwVpnEp6Entry 2 } fwVpnEp6Remote OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "Remote IPv6 end-point address" ::= { fwVpnEp6Entry 3 } fwVpnEp6RemoteType OBJECT-TYPE SYNTAX VpnEndpointType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote VPN end-point" ::= { fwVpnEp6Entry 4 } fwVpnEp6ReceivedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received bytes between the end-point pair" ::= { fwVpnEp6Entry 5 } fwVpnEp6SentBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of sent bytes between the end-point pair" ::= { fwVpnEp6Entry 6 } fwVpnEp6IpsecSa OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of currently established IPsec SAs between the end-point pair" ::= { fwVpnEp6Entry 7 } -- Global firewall informations fwConnNumber OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current connections" ::= { engineObjects 4 } fwAccepted OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of accepted packets" ::= { engineObjects 5 } fwDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped packets" ::= { engineObjects 6 } fwLogged OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of logged packets" ::= { engineObjects 7 } fwAccounted OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of accounted packets" ::= { engineObjects 8 } fwRejected OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rejected packets" ::= { engineObjects 9 } -- Hardware status used by data corresponding to sg-hwstat output FwHwComponentStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational status of the corresponding hardware component. notPresent(-1) Component is unexpectedly not present. ok(0) Component working as intended. warning(1) Component needs attention. error(2) Component is inoperative due to a failure. fatalError(3) Component has failed unrecoverably." SYNTAX INTEGER { notPresent(-1), -- This should never occur. ok(0), warning(1), error(2), fatalError(3) -- Currently nothing produces this. } -- Temperature sensors fwHwTempSensorTable OBJECT-TYPE SYNTAX SEQUENCE OF FwHwTempSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each temperature sensor in system" ::= { engineObjects 16 } fwHwTempSensorEntry OBJECT-TYPE SYNTAX FwHwTempSensorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for a temperature sensor" INDEX { fwHwTempSensorIndex } ::= { fwHwTempSensorTable 1 } FwHwTempSensorEntry ::= SEQUENCE { fwHwTempSensorIndex INTEGER, fwHwTemperatureName DisplayString, fwHwTemperature Integer32, fwHwTemperatureStatus FwHwComponentStatus } fwHwTempSensorIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each temperature sensor" ::= { fwHwTempSensorEntry 1 } fwHwTemperatureName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the temperature sensor" ::= { fwHwTempSensorEntry 2 } fwHwTemperature OBJECT-TYPE SYNTAX Integer32 UNITS "degrees C" MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature in degrees C for the given temperature sensor" ::= { fwHwTempSensorEntry 3 } fwHwTemperatureStatus OBJECT-TYPE SYNTAX FwHwComponentStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the temperature sensor (not present, ok, warning, error, fatal error)" ::= { fwHwTempSensorEntry 4 } -- PSU statuses fwPsuTable OBJECT-TYPE SYNTAX SEQUENCE OF FwPsuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each power supply unit in system" ::= { engineObjects 17 } fwPsuEntry OBJECT-TYPE SYNTAX FwPsuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for a PSU" INDEX { fwPsuIndex } ::= { fwPsuTable 1 } FwPsuEntry ::= SEQUENCE { fwPsuIndex INTEGER, fwPsuName DisplayString, fwPsuStatus FwHwComponentStatus } fwPsuIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each PSU" ::= { fwPsuEntry 1 } fwPsuName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the PSU" ::= { fwPsuEntry 2 } fwPsuStatus OBJECT-TYPE SYNTAX FwHwComponentStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the PSU (not present, ok, warning, error, fatal error)" ::= { fwPsuEntry 3 } -- Fan statuses fwFanTable OBJECT-TYPE SYNTAX SEQUENCE OF FwFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each fan in system" ::= { engineObjects 18 } fwFanEntry OBJECT-TYPE SYNTAX FwFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for a fan" INDEX { fwFanIndex } ::= { fwFanTable 1 } FwFanEntry ::= SEQUENCE { fwFanIndex INTEGER, fwFanName DisplayString, fwFan Integer32, fwFanStatus FwHwComponentStatus } fwFanIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each fan" ::= { fwFanEntry 1 } fwFanName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Fan name" ::= { fwFanEntry 2 } fwFan OBJECT-TYPE SYNTAX Integer32 UNITS "RPM" MAX-ACCESS read-only STATUS current DESCRIPTION "Fan speed in RPM" ::= { fwFanEntry 3 } fwFanStatus OBJECT-TYPE SYNTAX FwHwComponentStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the fan (not present, ok, warning, error, fatal error)" ::= { fwFanEntry 4 } -- Voltage statuses fwVoltageTable OBJECT-TYPE SYNTAX SEQUENCE OF FwVoltageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each voltage in system" ::= { engineObjects 20 } fwVoltageEntry OBJECT-TYPE SYNTAX FwVoltageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for a voltage" INDEX { fwVoltageIndex } ::= { fwVoltageTable 1 } FwFixedThousandths ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-3" STATUS current DESCRIPTION "Fixed point, three decimals" SYNTAX Integer32 FwVoltageEntry ::= SEQUENCE { fwVoltageIndex INTEGER, fwVoltageName DisplayString, fwVoltage FwFixedThousandths, fwVoltageStatus FwHwComponentStatus } fwVoltageIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each voltage" ::= { fwVoltageEntry 1 } fwVoltageName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage name" ::= { fwVoltageEntry 2 } fwVoltage OBJECT-TYPE SYNTAX FwFixedThousandths UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Voltage in volts" ::= { fwVoltageEntry 3 } fwVoltageStatus OBJECT-TYPE SYNTAX FwHwComponentStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the voltage (not present, ok, warning, error, fatal error)" ::= { fwVoltageEntry 4 } -- fw connections fwNewConnectionsS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of new connections / second" ::= { fwHardware 4 } fwDiscardedConnectionsS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discarded connections / second" ::= { fwHardware 5 } fwRefusedConnectionsS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of refused connections / second" ::= { fwHardware 6 } -- Mobile Broadband fwMbrInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF FwMbrInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each cellular interface in system" ::= { engineObjects 14 } fwMbrInterfaceEntry OBJECT-TYPE SYNTAX FwMbrInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for a cellular interface" INDEX { fwMbrInterfaceIndex } ::= { fwMbrInterfaceTable 1 } FwMbrInterfaceEntry ::= SEQUENCE { fwMbrInterfaceIndex INTEGER, fwMbrName DisplayString, fwMbrBandUsed DisplayString, fwMbrSignalStrength Integer32, fwMbrStatus FwHwComponentStatus } fwMbrInterfaceIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each cellular interface or interface sub-layer in the managed system." ::= { fwMbrInterfaceEntry 1 } fwMbrName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Modem name" ::= { fwMbrInterfaceEntry 2 } fwMbrBandUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Interface band in use" ::= { fwMbrInterfaceEntry 3 } fwMbrSignalStrength OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem signal strength in dBm" ::= { fwMbrInterfaceEntry 4 } fwMbrStatus OBJECT-TYPE SYNTAX FwHwComponentStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the modem (not present, ok, warning, error, fatal error)" ::= { fwMbrInterfaceEntry 5 } -- hardware related objects fwHardware OBJECT IDENTIFIER ::= { engineObjects 11 } -- Processor fwCpuStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FwCpuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each CPU in a system and total usage of all cpus." ::= { fwHardware 1 } fwCpuStatsEntry OBJECT-TYPE SYNTAX FwCpuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row with information about CPU usage" INDEX { fwCpuStatsId } ::= { fwCpuStatsTable 1 } FwCpuEntry ::= SEQUENCE { fwCpuStatsId INTEGER, fwCpuName DisplayString, fwCpuTotal Unsigned32, fwCpuUser Unsigned32, fwCpuSystem Unsigned32, fwCpuNice Unsigned32, fwCpuIdle Unsigned32, fwCpuIoWait Unsigned32, fwCpuHwIrq Unsigned32, fwCpuSoftIrq Unsigned32 } fwCpuStatsId OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each CPU in the managed system. First element with Id '0' is designed for total values." ::= { fwCpuStatsEntry 1 } fwCpuName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of data current line concern" ::= { fwCpuStatsEntry 2 } fwCpuTotal OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The total CPU load percentage" ::= { fwCpuStatsEntry 3 } fwCpuUser OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the CPU has spent running users' processes that are not niced" ::= { fwCpuStatsEntry 4 } fwCpuSystem OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the CPU has spent running the kernel and its processes" ::= { fwCpuStatsEntry 5 } fwCpuNice OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the CPU has spent running users' processes that have been niced" ::= { fwCpuStatsEntry 6 } fwCpuIdle OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the CPU was idle" ::= { fwCpuStatsEntry 7 } fwCpuIoWait OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the CPU has been waiting for I/O to complete" ::= { fwCpuStatsEntry 8 } fwCpuHwIrq OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the CPU has been servicing hardware interrupts" ::= { fwCpuStatsEntry 9 } fwCpuSoftIrq OBJECT-TYPE SYNTAX Unsigned32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of time the CPU has been servicing software interrupts" ::= { fwCpuStatsEntry 10 } -- Memory fwMemoryInfo OBJECT IDENTIFIER ::= { fwHardware 2 } fwSwapBytesTotal OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total swap space" ::= { fwMemoryInfo 1 } fwSwapBytesUsed OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Used space of swap" ::= { fwMemoryInfo 2 } fwSwapBytesUnused OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of unused space of swap" ::= { fwMemoryInfo 3 } fwMemBytesTotal OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of available bytes of physical memory" ::= { fwMemoryInfo 4 } fwMemBytesUsed OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of memory being in use" ::= { fwMemoryInfo 5 } fwMemBytesUnused OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of unused bytes of physical memory" ::= { fwMemoryInfo 6 } fwMemBytesBuffers OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of memory used as buffers" ::= { fwMemoryInfo 7 } fwMemBytesCached OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of memory used as cache" ::= { fwMemoryInfo 8 } fwMemBytesSReclaimable OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of reclaimable Slab memory " ::= { fwMemoryInfo 9 } fwMemBytesAvailable OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of memory available" ::= { fwMemoryInfo 10 } fwInspectionBytesUsed OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of inspection memory being used" ::= { fwMemoryInfo 11 } fwInspectionPercentageUsed OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of inspection memory being used as a percentage of memory given to inspection" ::= { fwMemoryInfo 12 } -- disk(s) statistics fwDiskStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FwDiskStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains an entry for each partition mounted in a system." ::= { fwHardware 3 } fwDiskStatsEntry OBJECT-TYPE SYNTAX FwDiskStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row of information concerning one partition" INDEX { fwPartitionIndex } ::= { fwDiskStatsTable 1 } FwDiskStatsEntry ::= SEQUENCE { fwPartitionIndex INTEGER, fwPartitionDevName DisplayString, fwMountPointName DisplayString, fwPartitionSize CounterBasedGauge64, fwPartitionUsed CounterBasedGauge64, fwPartitionAvail CounterBasedGauge64 } fwPartitionIndex OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each partition" ::= { fwDiskStatsEntry 1 } fwPartitionDevName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A unique name of a device" ::= { fwDiskStatsEntry 2 } fwMountPointName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of a mount point" ::= { fwDiskStatsEntry 3 } fwPartitionSize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kbytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Total size of the partition" ::= { fwDiskStatsEntry 4 } fwPartitionUsed OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kbytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Amount of used space of the partition (in kilobytes)" ::= { fwDiskStatsEntry 5 } fwPartitionAvail OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "kbytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Information about amount of free space on partition (in kilobytes)" ::= { fwDiskStatsEntry 6 } fwDiskSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Disk serial number" ::= { engineObjects 15 } -- -- Network node objects, e.g. identifications, state, load netNodeObjects OBJECT IDENTIFIER ::= { engineObjects 19 } nodeClusterId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The identification number of the cluster this node belongs to" ::= { netNodeObjects 1 } nodeMemberId OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "Node's member identification within the cluster" ::= { netNodeObjects 2 } nodeOperState OBJECT-TYPE SYNTAX INTEGER { unknown(0), online(1), goingOnline(2), lockedOnline(3), goingLockedOnline(4), offline(5), goingOffline(6), lockedOffline(7), goingLockedOffline(8), standby(9), goingStandby(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operative (clustering) state of the node" ::= { netNodeObjects 3 } nodeCPULoad OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU load percentage on the node" ::= { netNodeObjects 4 } nodeLastLogin OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The most recent login event on the node" ::= { netNodeObjects 5 } nodeLastLoginTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the most recent login event on the node" ::= { netNodeObjects 6 } nodeHwmonEvent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Reason for the hardware monitoring event" ::= { netNodeObjects 8 } nodeApplianceModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Appliance model name" ::= { netNodeObjects 9 } nodePosCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Appliance POS code" ::= { netNodeObjects 10 } nodeLoginTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The most recent login event on the node" ::= { netNodeObjects 11 } nodePolicyApplyTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time when the security policy was installed to the node" ::= { netNodeObjects 12 } nodeHardwareSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware chassis serial number" ::= { netNodeObjects 13 } -- -- Tester objects nodeTestTable OBJECT-TYPE SYNTAX SEQUENCE OF NodeTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each test instance that was configured to send a trap on test failure" ::= { netNodeObjects 7 } nodeTestEntry OBJECT-TYPE SYNTAX NodeTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for a test instance" INDEX { nodeTestIndex } ::= { nodeTestTable 1 } NodeTestEntry ::= SEQUENCE { nodeTestIndex Unsigned32, nodeTestIdentity DisplayString, nodeTestResult INTEGER, nodeTestResultTime TimeStamp } nodeTestIndex OBJECT-TYPE SYNTAX Unsigned32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique positive integer index of the nodeTest instance" ::= { nodeTestEntry 1 } nodeTestIdentity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Identification string of a nodeTest" ::= { nodeTestEntry 2 } nodeTestResult OBJECT-TYPE SYNTAX INTEGER {success(1), failure(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "The most recent result of the nodeTest" ::= { nodeTestEntry 3 } nodeTestResultTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the most recent result of the nodeTest" ::= { nodeTestEntry 4 } -- Firewall events fwPolicyInstall NOTIFICATION-TYPE OBJECTS { fwSecurityPolicy } STATUS current DESCRIPTION "A firewall policy was (re)installed" ::= { engineNotifications 1 } -- Network node events nodeOnline NOTIFICATION-TYPE OBJECTS { nodeOperState } STATUS current DESCRIPTION "A node has gone to an online state" ::= { engineNotifications 2 } nodeOffline NOTIFICATION-TYPE OBJECTS { nodeOperState } STATUS current DESCRIPTION "A node has gone to an offline or standby state" ::= { engineNotifications 3 } nodeBoot NOTIFICATION-TYPE STATUS current DESCRIPTION "A node has booted up" ::= { engineNotifications 4 } nodeShutdown NOTIFICATION-TYPE STATUS current DESCRIPTION "A node is shutting down" ::= { engineNotifications 5 } nodeUserLogin NOTIFICATION-TYPE OBJECTS { nodeLastLogin } STATUS current DESCRIPTION "A user has started a login session" ::= { engineNotifications 6 } nodeFailedUserLogin NOTIFICATION-TYPE STATUS current DESCRIPTION "Failed user login" ::= { engineNotifications 7 } nodeUserLogout NOTIFICATION-TYPE STATUS current DESCRIPTION "A user has finished session" ::= { engineNotifications 8 } nodeTestFailure NOTIFICATION-TYPE OBJECTS { nodeTestIdentity } STATUS current DESCRIPTION "NodeTest has failed" ::= { engineNotifications 9 } nodeHwmon NOTIFICATION-TYPE OBJECTS { nodeHwmonEvent } STATUS current DESCRIPTION "Hardware monitoring system has detected problems" ::= { engineNotifications 10 } -- Groups firewallGeneralInformationGroup OBJECT-GROUP OBJECTS { fwSoftwareVersion, fwSecurityPolicy, fwPolicyTime } STATUS current DESCRIPTION "A collection of objects giving general information about the firewall" ::= { engineGroups 1 } firewallIfaceStatsGroup OBJECT-GROUP OBJECTS { fwIfName, fwIfAcceptedPkts, fwIfDroppedPkts, fwIfLoggedPkts, fwIfAccountedPkts, fwIfRejectedPkts, fwIfForwardedPkts, fwIfAcceptedBytes, fwIfDroppedBytes, fwIfLoggedBytes, fwIfAccountedBytes, fwIfRejectedBytes, fwIfForwardedBytes, fwIfComment } STATUS current DESCRIPTION "A collection of objects giving information about the current firewall interface related traffic statistics" ::= { engineGroups 2 } firewallGeneralStatsGroup OBJECT-GROUP OBJECTS { fwConnNumber, fwAccepted, fwDropped, fwLogged, fwAccounted, fwRejected } STATUS current DESCRIPTION "A collection of objects giving general information about the firewall traffic statistics" ::= { engineGroups 3 } firewallHardwareGroup OBJECT-GROUP OBJECTS { fwCpuName, fwCpuTotal, fwCpuUser, fwCpuSystem, fwCpuHwIrq, fwCpuSoftIrq, fwSwapBytesTotal, fwMemBytesTotal, fwMemBytesBuffers, fwHwTemperatureName, fwHwTemperature, fwHwTemperatureStatus, fwPsuName, fwPsuStatus, fwFanName, fwFan, fwFanStatus, fwVoltageName, fwVoltage, fwVoltageStatus, fwPartitionDevName, fwMountPointName, fwDiskSerialNumber, fwPartitionSize } STATUS current DESCRIPTION "A collection of objects giving information about the hardware parameters" ::= { engineGroups 4 } firewallMbrInterfaceGroup OBJECT-GROUP OBJECTS { fwMbrName, fwMbrBandUsed, fwMbrSignalStrength, fwMbrStatus } STATUS current DESCRIPTION "A collection of objects giving information about the Mbr related parameters" ::= { engineGroups 5 } firewallPerformanceGroup OBJECT-GROUP OBJECTS { fwCpuNice, fwCpuIdle, fwCpuIoWait, fwSwapBytesUsed, fwSwapBytesUnused, fwMemBytesUsed, fwMemBytesUnused, fwMemBytesCached, fwMemBytesAvailable, fwInspectionBytesUsed, fwInspectionPercentageUsed, fwMemBytesSReclaimable, fwPartitionUsed, fwPartitionAvail, fwNewConnectionsS, fwDiscardedConnectionsS, fwRefusedConnectionsS} STATUS current DESCRIPTION "A collection of objects giving information about the performance related parameters" ::= { engineGroups 6 } firewallVpnEpGroup OBJECT-GROUP OBJECTS { fwVpnEp4Local, fwVpnEp4Remote, fwVpnEp4RemoteType, fwVpnEp4ReceivedBytes, fwVpnEp4SentBytes, fwVpnEp4IpsecSa, fwVpnEp6Local, fwVpnEp6Remote, fwVpnEp6RemoteType, fwVpnEp6ReceivedBytes, fwVpnEp6SentBytes, fwVpnEp6IpsecSa } STATUS current DESCRIPTION "A collection of objects giving information about the configured VPN end-point pairs" ::= { engineGroups 7 } nodeIdentificationGroup OBJECT-GROUP OBJECTS { nodeClusterId, nodeMemberId, nodeApplianceModel, nodePosCode, nodeHardwareSerialNumber } STATUS current DESCRIPTION "A collection of objects identifying the node in a cluster" ::= { engineGroups 8 } nodeStatusGroup OBJECT-GROUP OBJECTS { nodeOperState, nodeCPULoad, nodePolicyApplyTime } STATUS current DESCRIPTION "A collection of objects giving information about the status of the node" ::= { engineGroups 9 } nodeLoginGroup OBJECT-GROUP OBJECTS { nodeLastLogin, nodeLastLoginTime, nodeLoginTime } STATUS current DESCRIPTION "A collection of objects giving information about logins into the node" ::= { engineGroups 10 } nodeTesterGroup OBJECT-GROUP OBJECTS { nodeTestIdentity, nodeTestResult, nodeTestResultTime } STATUS current DESCRIPTION "A collection of objects giving information about the tests in the test subsystem of the node" ::= { engineGroups 11 } firewallGeneralNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { fwPolicyInstall } STATUS current DESCRIPTION "A collection of notification giving information about general events in the firewall" ::= { engineGroups 12 } nodeStatusNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { nodeOnline, nodeOffline, nodeBoot, nodeShutdown } STATUS current DESCRIPTION "A collection of notifications informing about changes in a node's status" ::= { engineGroups 13 } nodeLoginNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { nodeUserLogin, nodeFailedUserLogin, nodeUserLogout } STATUS current DESCRIPTION "A collection of notifications informing about user logins" ::= { engineGroups 14 } nodeTesterNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { nodeTestFailure } STATUS current DESCRIPTION "A collection of notifications informing about test failures" ::= { engineGroups 15 } nodeHwmonNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { nodeHwmon } STATUS current DESCRIPTION "A collection of notifications informing about hardware monitoring issues" ::= { engineGroups 16 } nodeHwmonGroup OBJECT-GROUP OBJECTS { nodeHwmonEvent } STATUS current DESCRIPTION "A collection of objects giving information about hardware monitoring events in the node" ::= { engineGroups 17 } firewallIfaceStatsProcGroup OBJECT-GROUP OBJECTS { fwIfProcName, fwIfProcReceivedBytes, fwIfProcReceivedPackets, fwIfProcReceivedErrs, fwIfProcReceivedDrop, fwIfProcReceivedFifo, fwIfProcReceivedFrame, fwIfProcReceivedCompressed, fwIfProcReceivedMulticast, fwIfProcTransmitBytes, fwIfProcTransmitPackets, fwIfProcTransmitErrs, fwIfProcTransmitDrop, fwIfProcTransmitFifo, fwIfProcTransmitColls, fwIfProcTransmitCarrier, fwIfProcTransmitCompressed } STATUS current DESCRIPTION "A collection of objects giving information about the current firewall interface related traffic statistics" ::= { engineGroups 19 } -- Virtual Engine Information fwVETable OBJECT-TYPE SYNTAX SEQUENCE OF FwVEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each virtual engine" ::= { engineObjects 21 } fwVEEntry OBJECT-TYPE SYNTAX FwVEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for virtual engine" INDEX { fwVEIndex } ::= { fwVETable 1 } FwVEEntry ::= SEQUENCE { fwVEIndex INTEGER, fwVEEngineId INTEGER, fwVEName DisplayString, fwVEStatus DisplayString } fwVEIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater that zero, for each virtual engine." ::= { fwVEEntry 1 } fwVEEngineId OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Engine ID of the virtual engine" ::= { fwVEEntry 2 } fwVEName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the virtual engine" ::= { fwVEEntry 3 } fwVEStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the virtual engine e.g. Active" ::= { fwVEEntry 4 } engineVEGroup OBJECT-GROUP OBJECTS { fwVEEngineId, fwVEName, fwVEStatus } STATUS current DESCRIPTION "A collection of objects giving information about Virtual Engines in the Engine" ::= { engineGroups 18 } -- interface stats from proc fwIfStatsProcTable OBJECT-TYPE SYNTAX SEQUENCE OF FwIfStatsProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains an entry for each interface in system" ::= { engineObjects 22 } -- Statistics fwIfStatsProcEntry OBJECT-TYPE SYNTAX FwIfStatsProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row for an interface" INDEX { fwIfStatsProcIndex } ::= { fwIfStatsProcTable 1 } FwIfStatsProcEntry ::= SEQUENCE { fwIfStatsProcIndex INTEGER, fwIfProcName DisplayString, fwIfProcReceivedBytes Counter64, fwIfProcReceivedPackets Counter64, fwIfProcReceivedErrs Counter64, fwIfProcReceivedDrop Counter64, fwIfProcReceivedFifo Counter64, fwIfProcReceivedFrame Counter64, fwIfProcReceivedCompressed Counter64, fwIfProcReceivedMulticast Counter64, fwIfProcTransmitBytes Counter64, fwIfProcTransmitPackets Counter64, fwIfProcTransmitErrs Counter64, fwIfProcTransmitDrop Counter64, fwIfProcTransmitFifo Counter64, fwIfProcTransmitColls Counter64, fwIfProcTransmitCarrier Counter64, fwIfProcTransmitCompressed Counter64 } fwIfStatsProcIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, for each interface or interface sub-layer in the managed system." ::= { fwIfStatsProcEntry 1 } fwIfProcName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of interface." ::= { fwIfStatsProcEntry 2 } fwIfProcReceivedBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of good received bytes, corresponding to rx_packets. For IEEE 802.3 devices should count the length of Ethernet Frames excluding the FCS." ::= { fwIfStatsProcEntry 3 } fwIfProcReceivedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of good packets received by the interface. For hardware interfaces counts all good packets received from the device by the host, including packets which host had to drop at various stages of processing (even in the driver)." ::= { fwIfStatsProcEntry 4 } fwIfProcReceivedErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bad packets received on this network device. This counter must include events counted by rx_length_errors, rx_crc_errors, rx_frame_errors and other errors not otherwise counted." ::= { fwIfStatsProcEntry 5 } fwIfProcReceivedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received but not processed, e.g. due to lack of resources or unsupported protocol. For hardware interfaces this counter may include packets discarded due to L2 address filtering but should not include packets dropped by the device due to buffer exhaustion which are counted separately in rx_missed_errors (since procfs folds those two counters together)." ::= { fwIfStatsProcEntry 6 } fwIfProcReceivedFifo OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Historically the count of overflow events. Those events may be reported in the receive descriptors or via interrupts, and may not correspond one-to-one with dropped packets. This statistics was used interchangeably with rx_over_errors. Not recommended for use in drivers for high speed interfaces. This statistic is used on software devices, e.g. to count software packet queue overflow (can) or sequencing errors (GRE)." ::= { fwIfStatsProcEntry 7 } fwIfProcReceivedFrame OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Receiver frame alignment errors. Part of aggregate frame errors in /proc/net/dev. For IEEE 802.3 devices this counter should be equivalent to: - 30.3.1.1.7 aAlignmentErrors" ::= { fwIfStatsProcEntry 8 } fwIfProcReceivedCompressed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of correctly received compressed packets. This counters is only meaningful for interfaces which support packet compression (e.g. CSLIP, PPP)." ::= { fwIfStatsProcEntry 9 } fwIfProcReceivedMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Multicast packets received. For hardware interfaces this statistic is commonly calculated at the device level (unlike rx_packets) and therefore may include packets which did not reach the host. For IEEE 802.3 devices this counter may be equivalent to: - 30.3.1.1.21 aMulticastFramesReceivedOK" ::= { fwIfStatsProcEntry 10 } fwIfProcTransmitBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of good transmitted bytes, corresponding to tx_packets. For IEEE 802.3 devices should count the length of Ethernet Frames excluding the FCS." ::= { fwIfStatsProcEntry 11 } fwIfProcTransmitPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets successfully transmitted. For hardware interfaces counts packets which host was able to successfully hand over to the device, which does not necessarily mean that packets had been successfully transmitted out of the device, only that device acknowledged it copied them out of host memory." ::= { fwIfStatsProcEntry 12 } fwIfProcTransmitErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of transmit problems. This counter must include events counter by tx_aborted_errors, tx_carrier_errors, tx_fifo_errors, tx_heartbeat_errors, tx_window_errors and other errors not otherwise counted." ::= { fwIfStatsProcEntry 13 } fwIfProcTransmitDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped on their way to transmission, e.g. due to lack of resources." ::= { fwIfStatsProcEntry 14 } fwIfProcTransmitFifo OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frame transmission errors due to device FIFO underrun / underflow. This condition occurs when the device begins transmission of a frame but is unable to deliver the entire frame to the transmitter in time for transmission. Part of aggregate carrier errors in /proc/net/dev." ::= { fwIfStatsProcEntry 15 } fwIfProcTransmitColls OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of collisions during packet transmissions." ::= { fwIfStatsProcEntry 16 } fwIfProcTransmitCarrier OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frame transmission errors due to loss of carrier during transmission. Part of aggregate carrier errors in /proc/net/dev. For IEEE 802.3 devices this counter must be equivalent to: - 30.3.1.1.13 aCarrierSenseErrors" ::= { fwIfStatsProcEntry 17 } fwIfProcTransmitCompressed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted compressed packets. This counters is only meaningful for interfaces which support packet compression (e.g. CSLIP, PPP)." ::= { fwIfStatsProcEntry 18 } END