HopeRF RFM69CW or RFM12B SMD wireless transceiver module IC >VALUE >NAME >NAME >VALUE The RFM69CW is a low-power, low cost radiotransceiver that is capable of operating in the 434MHz and 900MHz open bands. It supports OOK, FSK and GFSK Modulation. It is pin compatible to the RFM12B Developed by element14 : element14 CAD Library consolidation.ulp at 27/07/2012 14:02:49 * * * * >NAME >VALUE >NAME >VALUE 8-bit Microcontroller with In-System Programmable Flash Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL Resistors, Capacitors, Inductors Based on the previous libraries: <ul> <li>r.lbr <li>cap.lbr <li>cap-fe.lbr <li>captant.lbr <li>polcap.lbr <li>ipc-smd.lbr </ul> All SMD packages are defined according to the IPC specifications and CECC <author>Created by librarian@cadsoft.de</author> for Electrolyt Capacitors see also : www.bccomponents.com www.panasonic.com www.kemet.com http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf (SANYO) for trimmer refence see : www.electrospec-inc.com/cross_references/trimpotcrossref.asp <table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0> <tr valign="top"> <! <td width="10"> </td> <td width="90%"> TRIM-POT CROSS REFERENCE <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> <TR> <TD COLSPAN=8> RECTANGULAR MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURNS </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD><TD> </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3005P 3006P 3006W 3006Y 3009P 3009W 3009Y 3057J 3057L 3057P 3057Y 3059J 3059L 3059P 3059Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 89P 89W 89X 89PH 76P 89XH 78SLT 78L ALT 56P ALT 78P ALT T8S 78L 56P 78P </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - T18/784 783 781 - - - 2199 1697/1897 1680/1880 2187 - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 8035EKP/CT20/RJ-20P - RJ-20X - - - 1211L 8012EKQ ALT 8012EKR ALT 1211P 8012EKJ 8012EKL 8012EKQ 8012EKR </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 2101P 2101W 2101Y - - - - - - - - 2102L 2102S 2102Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVMCOG - - - - - - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 43P 43W 43Y - - - - 40L 40P 40Y 70Y-T602 70L 70P 70Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - RT/RTR12 RT/RTR12 RT/RTR12 - RJ/RJR12 RJ/RJR12 RJ/RJR12 </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SQUARE MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3250L 3250P 3250W 3250X 3252P 3252W 3252X 3260P 3260W 3260X 3262P 3262W 3262X 3266P 3266W 3266X 3290H 3290P 3290W 3292P 3292W 3292X 3296P 3296W 3296X 3296Y 3296Z 3299P 3299W 3299X 3299Y 3299Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 66P ALT 66W ALT 66X ALT 66P ALT 66W ALT 66X ALT - 64W ALT - 64P ALT 64W ALT 64X ALT 64P 64W 64X 66X ALT 66P ALT 66W ALT 66P 66W 66X 67P 67W 67X 67Y 67Z 68P 68W 68X 67Y ALT 67Z ALT </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 5050 5091 5080 5087 - - - - - - - T63YB T63XB - - - 5887 5891 5880 - - - T93Z T93YA T93XA T93YB T93XB - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 8026EKP 8026EKW 8026EKM 8026EKP 8026EKB 8026EKM 1309X 1309P 1309W 8024EKP 8024EKW 8024EKN RJ-9P/CT9P RJ-9W RJ-9X - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 3103P 3103Y 3103Z 3103P 3103Y 3103Z - - - - - - 3105P/3106P 3105W/3106W 3105X/3106X 3105Y/3106Y 3105Z/3105Z 3102P 3102W 3102X 3102Y 3102Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - - - - - - - - - - - - - EVMCBG EVMCCG - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 55-1-X 55-4-X 55-3-X 55-2-X - - - - - - - - - - - - 50-2-X 50-4-X 50-3-X - - - 64P 64W 64X 64Y 64Z - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> RT/RTR22 RT/RTR22 RT/RTR22 RT/RTR22 RJ/RJR22 RJ/RJR22 RJ/RJR22 RT/RTR26 RT/RTR26 RT/RTR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RT/RTR24 RT/RTR24 RT/RTR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 - - - - - - - </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SINGLE TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3323P 3323S 3323W 3329H 3329P 3329W 3339H 3339P 3339W 3352E 3352H 3352K 3352P 3352T 3352V 3352W 3362H 3362M 3362P 3362R 3362S 3362U 3362W 3362X 3386B 3386C 3386F 3386H 3386K 3386M 3386P 3386S 3386W 3386X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 25P 25S 25RX 82P 82M 82PA - - - 91E 91X 91T 91B 91A 91V 91W 25W 25V 25P - 25S 25U 25RX 25X 72XW 72XL 72PM 72RX - 72PX 72P 72RXW 72RXL 72X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - T7YB T7YA - - - - - - - - - - - - TXD TYA TYP - TYD TX - 150SX 100SX 102T 101S 190T 150TX 101 - - 101SX </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ET6P ET6S ET6X RJ-6W/8014EMW RJ-6P/8014EMP RJ-6X/8014EMX TM7W TM7P TM7X - 8017SMS - 8017SMB 8017SMA - - CT-6W CT-6H CT-6P CT-6R - CT-6V CT-6X - - 8038EKV - 8038EKX - - 8038EKP 8038EKZ 8038EKW - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 3321H 3321P 3321N 1102H 1102P 1102T RVA0911V304A - RVA0911H413A RVG0707V100A RVA0607V(H)306A RVA1214H213A - - - - - - - - - 3104B 3104C 3104F 3104H - 3104M 3104P 3104S 3104W 3104X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> EVMQ0G EVMQIG EVMQ3G EVMS0G EVMQ0G EVMG0G - - - EVMK4GA00B EVM30GA00B EVMK0GA00B EVM38GA00B EVMB6 EVLQ0 - EVMMSG EVMMBG EVMMAG - - EVMMCS - - - - - EVMM1 - - EVMM0 - - EVMM3 </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 62-3-1 62-1-2 - - - - - - - - - - - 67R - 67P - - - - 67X 63V 63S 63M - - 63H 63P - - 63X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - RJ/RJR50 RJ/RJR50 RJ/RJR50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - </TD> </TR> </TABLE>   <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> <TR> <TD COLSPAN=7> SMD TRIM-POT CROSS REFERENCE MULTI-TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3224G 3224J 3224W 3269P 3269W 3269X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 44G 44J 44W 84P 84W 84X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST63Z ST63Y - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST5P ST5W ST5X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> </TR> <TR> <TD COLSPAN=7>  </TD> </TR> <TR> <TD COLSPAN=7> SINGLE TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3314G 3314J 3364A/B 3364C/D 3364W/X 3313G 3313J </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 23B 23A 21X 21W - 22B 22A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST5YL/ST53YL ST5YJ/5T53YJ ST-23A ST-22B ST-22 - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST-4B ST-4A - - - ST-3B ST-3A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVM-6YS EVM-1E EVM-1G EVM-1D - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> G4B G4A TR04-3S1 TRG04-2S1 - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - DVR-43A CVR-42C CVR-42A/C - - </TD> </TR> </TABLE> ALT = ALTERNATE   </td> </tr> </table> CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 3 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 4 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 6 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm + 5 mm, outline 2.4 x 7 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR Horizontal, grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 3.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 4.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 5.2 x 10.6 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 4.3 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 5.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 6.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 5.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 6.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 7.2 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 8.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 9.1 x 18.2 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 6.2 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 7.4 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 8.7 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 10.8 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 11.3 x 26.8 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 9.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 11.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 13.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 20.5 x 31.6 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 13.7 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 16.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 18.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 19.2 x 41.8 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 20.3 x 41.8 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 15.5 x 41.8 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 6.3 x 10.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 15.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 17.3 x 31.6 mm >NAME >VALUE Ceramic Chip Capacitor KEMET 0204 reflow solder Metric Code Size 1005 >NAME >VALUE Ceramic Chip Capacitor KEMET 0603 reflow solder Metric Code Size 1608 >NAME >VALUE Ceramic Chip Capacitor KEMET 0805 reflow solder Metric Code Size 2012 >NAME >VALUE Ceramic Chip Capacitor KEMET 1206 reflow solder Metric Code Size 3216 >NAME >VALUE Ceramic Chip Capacitor KEMET 1210 reflow solder Metric Code Size 3225 >NAME >VALUE Ceramic Chip Capacitor KEMET 1812 reflow solder Metric Code Size 4532 >NAME >VALUE Ceramic Chip Capacitor KEMET 1825 reflow solder Metric Code Size 4564 >NAME >VALUE Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650 >NAME >VALUE Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664 >NAME >VALUE Source: http://www.vishay.com/docs/10129/hpc0201a.pdf >NAME >VALUE Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf >NAME >VALUE CAPACITOR Source: AVX .. aphvc.pdf >NAME >VALUE CAPACITOR Source: AVX .. aphvc.pdf >NAME >VALUE CAPACITOR >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE RESISTOR Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf >NAME >VALUE RESISTOR wave soldering Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR type 0204, grid 5 mm >NAME >VALUE RESISTOR type 0204, grid 7.5 mm >NAME >VALUE RESISTOR type 0204, grid 2.5 mm >NAME >VALUE RESISTOR type 0207, grid 10 mm >NAME >VALUE RESISTOR type 0207, grid 12 mm >NAME >VALUE RESISTOR type 0207, grid 15mm >NAME >VALUE RESISTOR type 0207, grid 2.5 mm >NAME >VALUE RESISTOR type 0207, grid 5 mm >NAME >VALUE RESISTOR type 0207, grid 7.5 mm >NAME >VALUE RESISTOR type 0309, grid 10mm >NAME >VALUE RESISTOR type 0309, grid 12.5 mm >NAME >VALUE RESISTOR type 0309, grid 2.5 mm >NAME >VALUE RESISTOR type 0411, grid 12.5 mm >NAME >VALUE RESISTOR type 0411, grid 15 mm >NAME >VALUE RESISTOR type 0411, grid 3.81 mm >NAME >VALUE RESISTOR type 0414, grid 15 mm >NAME >VALUE RESISTOR type 0414, grid 5 mm >NAME >VALUE RESISTOR type 0617, grid 17.5 mm >NAME >VALUE RESISTOR type 0617, grid 22.5 mm >NAME >VALUE RESISTOR type 0617, grid 5 mm >NAME >VALUE RESISTOR type 0922, grid 22.5 mm >NAME >VALUE RESISTOR type 0613, grid 5 mm >NAME >VALUE RESISTOR type 0613, grid 15 mm >NAME >VALUE RESISTOR type 0817, grid 22.5 mm >NAME >VALUE 0817 RESISTOR type 0817, grid 6.35 mm >NAME >VALUE 0817 RESISTOR type V234, grid 12.5 mm >NAME >VALUE RESISTOR type V235, grid 17.78 mm >NAME >VALUE RESISTOR type V526-0, grid 2.5 mm >NAME >VALUE CECC Size RC2211 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC2211 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Wave Soldering source Beyschlag >NAME >VALUE RESISTOR type 0922, grid 7.5 mm >NAME >VALUE 0922 RESISTOR type RDH, grid 15 mm >NAME >VALUE RDH Mini MELF 0102 Axial >NAME >VALUE RESISTOR chip Source: http://www.vishay.com/docs/20008/dcrcw.pdf >NAME >VALUE Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR52 Source: VISHAY .. vta56.pdf >NAME >VALUE Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR53 Source: VISHAY .. vta56.pdf >NAME >VALUE Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR54 Source: VISHAY .. vta56.pdf >NAME >VALUE Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR55 Source: VISHAY .. vta56.pdf >NAME >VALUE Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR56 Source: VISHAY .. vta56.pdf >NAME >VALUE Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RNC55 Source: VISHAY .. vta56.pdf >NAME >VALUE Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RNC60 Source: VISHAY .. vta56.pdf >NAME >VALUE Package 4527 Source: http://www.vishay.com/docs/31059/wsrhigh.pdf >NAME >VALUE Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf >NAME >VALUE Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf >NAME >VALUE Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf >NAME >VALUE Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf >NAME >VALUE Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf >NAME >VALUE Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf >NAME >VALUE CRCW1218 Thick Film, Rectangular Chip Resistors Source: http://www.vishay.com .. dcrcw.pdf >NAME >VALUE Chip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use Source: http://www.murata.com .. GRM43DR72E224KW01.pdf >NAME >VALUE PRL1632 are realized as 1W for 3.2 × 1.6mm(1206) Source: http://www.mouser.com/ds/2/392/products_18-2245.pdf >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR grid 2.5 mm, outline 2.4 x 4.4 mm CAPACITOR grid 2.5 mm, outline 2.5 x 5 mm CAPACITOR grid 2.5 mm, outline 3 x 5 mm CAPACITOR grid 2.5 mm, outline 4 x 5 mm CAPACITOR grid 2.5 mm, outline 5 x 5 mm CAPACITOR grid 2.5 mm, outline 6 x 5 mm CAPACITOR grid 2.5 mm + 5 mm, outline 2.4 x 7 mm CAPACITOR grid 2.5 + 5 mm, outline 2.5 x 7.5 mm CAPACITOR grid 2.5 + 5 mm, outline 3.5 x 7.5 mm CAPACITOR grid 2.5 + 5 mm, outline 4.5 x 7.5 mm CAPACITOR grid 2.5 + 5 mm, outline 5.5 x 7.5 mm CAPACITOR grid 5 mm, outline 2.4 x 4.4 mm CAPACITOR grid 5 mm, outline 2.5 x 7.5 mm CAPACITOR grid 5 mm, outline 4.5 x 7.5 mm CAPACITOR grid 5 mm, outline 3 x 7.5 mm CAPACITOR grid 5 mm, outline 5 x 7.5 mm CAPACITOR grid 5 mm, outline 5.5 x 7.5 mm CAPACITOR grid 5 mm, outline 7.5 x 7.5 mm CAPACITOR Horizontal, grid 5 mm, outline 7.5 x 7.5 mm CAPACITOR grid 7.5 mm, outline 3.2 x 10.3 mm CAPACITOR grid 7.5 mm, outline 4.2 x 10.3 mm CAPACITOR grid 7.5 mm, outline 5.2 x 10.6 mm CAPACITOR grid 10.2 mm, outline 4.3 x 13.3 mm CAPACITOR grid 10.2 mm, outline 5.4 x 13.3 mm CAPACITOR grid 10.2 mm, outline 6.4 x 13.3 mm CAPACITOR grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm CAPACITOR grid 15 mm, outline 5.4 x 18.3 mm CAPACITOR grid 15 mm, outline 6.4 x 18.3 mm CAPACITOR grid 15 mm, outline 7.2 x 18.3 mm CAPACITOR grid 15 mm, outline 8.4 x 18.3 mm CAPACITOR grid 15 mm, outline 9.1 x 18.2 mm CAPACITOR grid 22.5 mm, outline 6.2 x 26.8 mm CAPACITOR grid 22.5 mm, outline 7.4 x 26.8 mm CAPACITOR grid 22.5 mm, outline 8.7 x 26.8 mm CAPACITOR grid 22.5 mm, outline 10.8 x 26.8 mm CAPACITOR grid 22.5 mm, outline 11.3 x 26.8 mm CAPACITOR grid 27.5 mm, outline 9.3 x 31.6 mm CAPACITOR grid 27.5 mm, outline 11.3 x 31.6 mm CAPACITOR grid 27.5 mm, outline 13.4 x 31.6 mm CAPACITOR grid 27.5 mm, outline 20.5 x 31.6 mm CAPACITOR grid 32.5 mm, outline 13.7 x 37.4 mm CAPACITOR grid 32.5 mm, outline 16.2 x 37.4 mm CAPACITOR grid 32.5 mm, outline 18.2 x 37.4 mm CAPACITOR grid 37.5 mm, outline 19.2 x 41.8 mm CAPACITOR grid 37.5 mm, outline 20.3 x 41.8 mm CAPACITOR grid 5 mm, outline 3.5 x 7.5 mm CAPACITOR grid 37.5 mm, outline 15.5 x 41.8 mm CAPACITOR grid 7.5 mm, outline 6.3 x 10.6 mm CAPACITOR grid 27.5 mm, outline 15.4 x 31.6 mm CAPACITOR grid 27.5 mm, outline 17.3 x 31.6 mm Ceramic Chip Capacitor KEMET 0204 reflow solder Metric Code Size 1005 Ceramic Chip Capacitor KEMET 0603 reflow solder Metric Code Size 1608 Ceramic Chip Capacitor KEMET 0805 reflow solder Metric Code Size 2012 Ceramic Chip Capacitor KEMET 1206 reflow solder Metric Code Size 3216 Ceramic Chip Capacitor KEMET 1210 reflow solder Metric Code Size 3225 Ceramic Chip Capacitor KEMET 1812 reflow solder Metric Code Size 4532 Ceramic Chip Capacitor KEMET 1825 reflow solder Metric Code Size 4564 Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650 Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664 Source: http://www.vishay.com/docs/10129/hpc0201a.pdf Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf CAPACITOR Source: AVX .. aphvc.pdf CAPACITOR Source: AVX .. aphvc.pdf CAPACITOR RESISTOR RESISTOR RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR RESISTOR wave soldering RESISTOR Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf RESISTOR wave soldering Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf RESISTOR MELF 0.10 W RESISTOR MELF 0.25 W RESISTOR MELF 0.12 W RESISTOR MELF 0.10 W RESISTOR MELF 0.25 W RESISTOR MELF 0.25 W RESISTOR MELF 0.12 W RESISTOR MELF 0.25 W RESISTOR type 0204, grid 5 mm RESISTOR type 0204, grid 7.5 mm RESISTOR type 0204, grid 2.5 mm RESISTOR type 0207, grid 10 mm RESISTOR type 0207, grid 12 mm RESISTOR type 0207, grid 15mm RESISTOR type 0207, grid 2.5 mm RESISTOR type 0207, grid 5 mm RESISTOR type 0207, grid 7.5 mm RESISTOR type 0309, grid 10mm RESISTOR type 0309, grid 12.5 mm RESISTOR type 0309, grid 2.5 mm RESISTOR type 0411, grid 12.5 mm RESISTOR type 0411, grid 15 mm RESISTOR type 0411, grid 3.81 mm RESISTOR type 0414, grid 15 mm RESISTOR type 0414, grid 5 mm RESISTOR type 0617, grid 17.5 mm RESISTOR type 0617, grid 22.5 mm RESISTOR type 0617, grid 5 mm RESISTOR type 0922, grid 22.5 mm RESISTOR type 0613, grid 5 mm RESISTOR type 0613, grid 15 mm RESISTOR type 0817, grid 22.5 mm RESISTOR type 0817, grid 6.35 mm RESISTOR type V234, grid 12.5 mm RESISTOR type V235, grid 17.78 mm RESISTOR type V526-0, grid 2.5 mm CECC Size RC2211 Reflow Soldering source Beyschlag CECC Size RC2211 Wave Soldering source Beyschlag CECC Size RC3715 Reflow Soldering source Beyschlag CECC Size RC3715 Wave Soldering source Beyschlag CECC Size RC6123 Reflow Soldering source Beyschlag CECC Size RC6123 Wave Soldering source Beyschlag RESISTOR type 0922, grid 7.5 mm RESISTOR type RDH, grid 15 mm Mini MELF 0102 Axial RESISTOR chip Source: http://www.vishay.com/docs/20008/dcrcw.pdf Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR52 Source: VISHAY .. vta56.pdf Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR53 Source: VISHAY .. vta56.pdf Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR54 Source: VISHAY .. vta56.pdf Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR55 Source: VISHAY .. vta56.pdf Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RBR56 Source: VISHAY .. vta56.pdf Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RNC55 Source: VISHAY .. vta56.pdf Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements MIL SIZE RNC60 Source: VISHAY .. vta56.pdf Package 4527 Source: http://www.vishay.com/docs/31059/wsrhigh.pdf Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf Wirewound Resistors, Precision Power Source: VISHAY wscwsn.pdf CRCW1218 Thick Film, Rectangular Chip Resistors Source: http://www.vishay.com .. dcrcw.pdf Chip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use Source: http://www.murata.com .. GRM43DR72E224KW01.pdf PRL1632 are realized as 1W for 3.2 × 1.6mm(1206) Source: http://www.mouser.com/ds/2/392/products_18-2245.pdf >NAME >VALUE >NAME >VALUE CAPACITOR, European symbol RESISTOR, European symbol >Name >Value >Name >Value >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF >NAME >VALUE >VALUE >VALUE >NAME >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Capacitor Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. Frames for Sheet and Layout >DRAWING_NAME >LAST_DATE_TIME >SHEET Sheet: FRAME DIN A4, landscape with location and doc. field Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER PIN HEADER >NAME >VALUE PIN HEADER Single Pads <author>Created by librarian@cadsoft.de</author> THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >VALUE >NAME THROUGH-HOLE PAD >NAME >VALUE THROUGH-HOLE PAD >NAME >VALUE SMD PAD >VALUE >NAME SMD PAD >VALUE >NAME THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD THROUGH-HOLE PAD SMD PAD SMD PAD >NAME >VALUE Wire PAD connect wire on PCB LEDs <author>Created by librarian@cadsoft.de</author> Extended by Federico Battaglin <author><federico.rd@fdpinternational.com></author> with DUOLED CHICAGO MINIATURE LAMP, INC. 7022X Series SMT LEDs 1206 Package Size >NAME >VALUE LED 5 mm, square, Siemens >NAME >VALUE LED 2 x 5 mm, rectangle >NAME >VALUE LED 3 mm, round >NAME >VALUE LED 5 mm, round >NAME >VALUE LED 1 mm, round, Siemens >NAME >VALUE LED BLOCK 1 LED, Siemens >NAME >VALUE LED HOLDER Siemens >NAME >VALUE LED HOLDER Siemens >NAME >VALUE LED HOLDER Siemens A+ K- >NAME >VALUE LED HOLDER Siemens >NAME >VALUE + - IR LED infrared emitting diode, Infineon TO-18, lead spacing 2.54 mm, cathode marking Inifineon >NAME >VALUE IR LED infrared emitting diode, Infineon TO-18, lead spacing 2.54 mm, cathode marking Inifineon >NAME >VALUE LED rectangle, 5.7 x 3.2 mm >NAME >VALUE IR LED IR transmitter Siemens >NAME >VALUE TOPLED® High-optical Power LED (HOP) Source: http://www.osram.convergy.de/ ... ls_t675.pdf >NAME >VALUE A C BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED Source: http://www.osram.convergy.de/ ... LB M676.pdf A C >NAME >VALUE Super SIDELED® High-Current LED LG A672, LP A672 Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13) C A >NAME >VALUE SmartLEDTM Hyper-Bright LED Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf >NAME >VALUE Hyper TOPLED® RG Hyper-Bright LED Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf >NAME >VALUE A C Hyper Micro SIDELED® Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf >NAME >VALUE Power TOPLED® Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf >NAME >VALUE C A C C Hyper CHIPLED Hyper-Bright LED LB Q993 Source: http://www.osram.convergy.de/ ... Lb_q993.pdf >NAME >VALUE Hyper CHIPLED Hyper-Bright LED LB R99A Source: http://www.osram.convergy.de/ ... lb_r99a.pdf >NAME >VALUE Mini TOPLED Santana® Source: http://www.osram.convergy.de/ ... LG M470.pdf >NAME >VALUE CHIPLED Source: http://www.osram.convergy.de/ ... LG_R971.pdf >NAME >VALUE CHIPLED Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf >NAME >VALUE CHIPLED Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf >NAME >VALUE CHIPLED-0603 Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603 Package able to withstand TTW-soldering heat Package suitable for TTW-soldering Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf >NAME >VALUE SmartLED TTW Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603 Package able to withstand TTW-soldering heat Package suitable for TTW-soldering Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf >NAME >VALUE Lumileds Lighting. LUXEON® with cool pad Source: K2.pdf >NAME >VALUE Lumileds Lighting. LUXEON® without cool pad Source: K2.pdf >NAME >VALUE LED 10 mm, round >NAME >VALUE SURFACE MOUNT LED LAMP 3.5x2.8mm Source: http://www.kingbright.com/manager/upload/pdf/KA-3528ASYC(Ver1189474662.1) >NAME >VALUE SML0805-2CW-TR (0805 PROFILE) COOL WHITE Source: http://www.ledtronics.com/ds/smd-0603/Dstr0093.pdf >NAME >VALUE SML10XXKH-TR (HIGH INTENSITY) LED <table> <tr><td>SML10R3KH-TR</td><td>ULTRA RED</td></tr> <tr><td>SML10E3KH-TR</td><td>SUPER REDSUPER BLUE</td></tr> <tr><td>SML10O3KH-TR</td><td>SUPER ORANGE</td></tr> <tr><td>SML10PY3KH-TR</td><td>PURE YELLOW</td></tr> <tr><td>SML10OY3KH-TR</td><td>ULTRA YELLOW</td></tr> <tr><td>SML10AG3KH-TR</td><td>AQUA GREEN</td></tr> <tr><td>SML10BG3KH-TR</td><td>BLUE GREEN</td></tr> <tr><td>SML10PB1KH-TR</td><td>SUPER BLUE</td></tr> <tr><td>SML10CW1KH-TR</td><td>WHITE</td></tr> </table> Source: http://www.ledtronics.com/ds/smd-1206/dstr0094.PDF >NAME >VALUE SML0603-XXX (HIGH INTENSITY) LED <table> <tr><td>AG3K</td><td>AQUA GREEN</td></tr> <tr><td>B1K</td><td>SUPER BLUE</td></tr> <tr><td>R1K</td><td>SUPER RED</td></tr> <tr><td>R3K</td><td>ULTRA RED</td></tr> <tr><td>O3K</td><td>SUPER ORANGE</td></tr> <tr><td>O3KH</td><td>SOFT ORANGE</td></tr> <tr><td>Y3KH</td><td>SUPER YELLOW</td></tr> <tr><td>Y3K</td><td>SUPER YELLOW</td></tr> <tr><td>2CW</td><td>WHITE</td></tr> </table> Source: http://www.ledtronics.com/ds/smd-0603/Dstr0092.pdf >NAME >VALUE CHICAGO MINIATURE LAMP, INC. 7022X Series SMT LEDs 1206 Package Size LED 5 mm, square, Siemens LED 2 x 5 mm, rectangle LED 3 mm, round LED 5 mm, round LED 1 mm, round, Siemens LED BLOCK 1 LED, Siemens LED HOLDER Siemens LED HOLDER Siemens LED HOLDER Siemens LED HOLDER Siemens IR LED infrared emitting diode, Infineon TO-18, lead spacing 2.54 mm, cathode marking Inifineon IR LED infrared emitting diode, Infineon TO-18, lead spacing 2.54 mm, cathode marking Inifineon LED rectangle, 5.7 x 3.2 mm IR LED IR transmitter Siemens TOPLED® High-optical Power LED (HOP) Source: http://www.osram.convergy.de/ ... ls_t675.pdf BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED Source: http://www.osram.convergy.de/ ... LB M676.pdf Super SIDELED® High-Current LED LG A672, LP A672 Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13) SmartLEDTM Hyper-Bright LED Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf Hyper TOPLED® RG Hyper-Bright LED Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf Hyper Micro SIDELED® Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf Power TOPLED® Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf Hyper CHIPLED Hyper-Bright LED LB Q993 Source: http://www.osram.convergy.de/ ... Lb_q993.pdf Hyper CHIPLED Hyper-Bright LED LB R99A Source: http://www.osram.convergy.de/ ... lb_r99a.pdf Mini TOPLED Santana® Source: http://www.osram.convergy.de/ ... LG M470.pdf CHIPLED Source: http://www.osram.convergy.de/ ... LG_R971.pdf CHIPLED Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf CHIPLED Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf CHIPLED-0603 Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603 Package able to withstand TTW-soldering heat Package suitable for TTW-soldering Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf SmartLED TTW Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603 Package able to withstand TTW-soldering heat Package suitable for TTW-soldering Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf Lumileds Lighting. LUXEON® with cool pad Source: K2.pdf Lumileds Lighting. LUXEON® without cool pad Source: K2.pdf LED 10 mm, round SURFACE MOUNT LED LAMP 3.5x2.8mm Source: http://www.kingbright.com/manager/upload/pdf/KA-3528ASYC(Ver1189474662.1) SML0805-2CW-TR (0805 PROFILE) COOL WHITE Source: http://www.ledtronics.com/ds/smd-0603/Dstr0093.pdf SML10XXKH-TR (HIGH INTENSITY) LED SML10R3KH-TRULTRA RED SML10E3KH-TRSUPER REDSUPER BLUE SML10O3KH-TRSUPER ORANGE SML10PY3KH-TRPURE YELLOW SML10OY3KH-TRULTRA YELLOW SML10AG3KH-TRAQUA GREEN SML10BG3KH-TRBLUE GREEN SML10PB1KH-TRSUPER BLUE SML10CW1KH-TRWHITE Source: http://www.ledtronics.com/ds/smd-1206/dstr0094.PDF SML0603-XXX (HIGH INTENSITY) LED AG3KAQUA GREEN B1KSUPER BLUE R1KSUPER RED R3KULTRA RED O3KSUPER ORANGE O3KHSOFT ORANGE Y3KHSUPER YELLOW Y3KSUPER YELLOW 2CWWHITE Source: http://www.ledtronics.com/ds/smd-0603/Dstr0092.pdf >NAME >VALUE LED OSRAM: - CHIPLED LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971 LH N974, LH R974 LS Q976, LO Q976, LY Q976 LO Q996 - Hyper CHIPLED LW Q18S LB Q993, LB Q99A, LB R99A - SideLED LS A670, LO A670, LY A670, LG A670, LP A670 LB A673, LV A673, LT A673, LW A673 LH A674 LY A675 LS A676, LA A676, LO A676, LY A676, LW A676 LS A679, LY A679, LG A679 - Hyper Micro SIDELED® LS Y876, LA Y876, LO Y876, LY Y876 LT Y87S - SmartLED LW L88C, LW L88S LB L89C, LB L89S, LG L890 LS L89K, LO L89K, LY L89K LS L896, LA L896, LO L896, LY L896 - TOPLED LS T670, LO T670, LY T670, LG T670, LP T670 LSG T670, LSP T670, LSY T670, LOP T670, LYG T670 LG T671, LOG T671, LSG T671 LB T673, LV T673, LT T673, LW T673 LH T674 LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676 LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C LW T67C LS T679, LY T679, LG T679 LS T770, LO T770, LY T770, LG T770, LP T770 LB T773, LV T773, LT T773, LW T773 LH T774 LS E675, LA E675, LY E675, LS T675 LS T776, LA T776, LO T776, LY T776, LB T776 LHGB T686 LT T68C, LB T68C - Hyper Mini TOPLED® LB M676 - Mini TOPLED Santana® LG M470 LS M47K, LO M47K, LY M47K Source: http://www.osram.convergy.de LUXEON: - LUMILED® LXK2-PW12-R00, LXK2-PW12-S00, LXK2-PW14-U00, LXK2-PW14-V00 LXK2-PM12-R00, LXK2-PM12-S00, LXK2-PM14-U00 LXK2-PE12-Q00, LXK2-PE12-R00, LXK2-PE12-S00, LXK2-PE14-T00, LXK2-PE14-U00 LXK2-PB12-K00, LXK2-PB12-L00, LXK2-PB12-M00, LXK2-PB14-N00, LXK2-PB14-P00, LXK2-PB14-Q00 LXK2-PR12-L00, LXK2-PR12-M00, LXK2-PR14-Q00, LXK2-PR14-R00 LXK2-PD12-Q00, LXK2-PD12-R00, LXK2-PD12-S00 LXK2-PH12-R00, LXK2-PH12-S00 LXK2-PL12-P00, LXK2-PL12-Q00, LXK2-PL12-R00 Source: www.luxeon.com KINGBRIGHT: KA-3528ASYC Source: www.kingbright.com Crystals and Crystal Resonators <author>Created by librarian@cadsoft.de</author> CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL RESONATOR >NAME >VALUE CRYSTAL >NAME >VALUE CRYSTAL >NAME >VALUE Model 406 6.0x3.5mm Low Cost Surface Mount Crystal Source: 008-0260-0_E.pdf >NAME >VALUE CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL CRYSTAL RESONATOR CRYSTAL CRYSTAL Model 406 6.0x3.5mm Low Cost Surface Mount Crystal Source: 008-0260-0_E.pdf >NAME >VALUE 1 2 CRYSTAL <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find sensors- accelerometers, gyros, compasses, magnetometers, light sensors, imagers, temp sensors, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>6-Pin Dual Flat No-Lead (DFN) w/ Center Pad (3.0 x 3.0 mm) - Designed for HTU21D</h3> <a href="">Datasheet</a> Specifications: <ul> <li>Pin Count: 6 (+ center pad)</li> <li>Dimensions: 3.0 x 3.0 x 0.9 mm</li> <li>Pitch: 1.0 mm</li> </ul> Devices Using: <ul> <li>HTU21D</li> </ul> >NAME >VALUE <h3>Measurement Specialties HTU21D Relative Humidity Sensor w/ Temperature</h3> HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints. >Name >Value <h3>Measurement Specialties HTU21D Relative Humidity Sensor w/ Temperature</h3> HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints. <a href="http://cdn.sparkfun.com/datasheets/BreakoutBoards/HTU21D.pdf">Datasheet</a> <h4>SparkFun Products</h4> <ul> <li><a href="https://www.sparkfun.com/products/12064">SparkFun Humidity and Temperature Sensor Breakout - HTU21D</a> (SEN-12064)</li> <li><a href="https://www.sparkfun.com/products/12081">SparkFun Weather Shield</a> (SEN-12081)</li> <li><a href="https://www.sparkfun.com/products/13630">SparkFun Photon Weather Shield</a> (SEN-13630)</li> </ul> <h3>SparkFun Connectors</h3> This library contains electrically-functional connectors. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <h3>Plated Through Hole - 6 Pin</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole Right Angle</h3> tPlace shows angle of connector. Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>SMD - 6 Pin Right Angle Male Header</h3> tDocu layer shows pin locations. Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 6 Pin with Locking Footprint</h3> Holes are offset 0.005" from center, locking pins in place during soldering. Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 6 Pin with Locking Footprint with Long Pads</h3> Holes are offset 0.005" from center, locking pins in place during soldering. Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole Locking Footprint</h3> Holes are offset 0.005" from center to hold pins in place during soldering. Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint</h3> Holes are offset 0.005" from center to hold pins in place during soldering. tPlace shows location of connector. Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 6 Pin Locking Header</h3> Includes silk outline for 6 pin female header Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint:</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 6 Pin with Long Pads</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -6 Pin PTH</h3> Specifications: <ul><li>Pin count: 6</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Header - 6 pin Female SMD</h3> Right angle 0.1" Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”http://cdn.sparkfun.com/datasheets/Prototyping/19686.pdf”>Datasheet referenced for footprint:</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3> 6 Pin Holes</h3> No silk, no plating Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> <h3> 6 Pin SMD Female Header</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3> 6 Pin SMD Female Header</h3> Alternate pin configuration Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3> 6 Pin SMD Female Header - Combined Footprint</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3> 6 Pin SMD Male Header</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>JST SH Vertical 6-Pin Connector -SMD</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:1mm</li> <a href="https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet referenced for footprint</a> </ul> Example device(s): <ul><li>CONN_06</li> <li>EM-406</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 6 Pin No Silk Outline</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 6 Pin</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:1.27mm</li> </ul> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3> Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint</h3> Pins are staggered 0.005" off center to lock pins while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3> Holes are offset 0.005" from center to lock pins in place while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> Pins are offset 0.005" from center to lock pins in place during soldering. Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3> Holes are offset 0.007" from center to hold pins in place during soldering. Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin No Silk Outline</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Long Pads</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Right Angle Plated Through Hole</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>Pogo Pins - 3 Pin</h3> Specifications: <ul><li>Pin count:3</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3> Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 5mm/197mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3> Holes are offset from center 0.005" to lock pins in place while soldering. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Right Angle SMT</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 3 Pin SMD</h3> Specifications: <ul><li>Pin count:3</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Female Header</h3> Silk outline of pin location Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD- 3 Pin Right Angle Male Headers</h3> No silk outline, but tDocu layer shows pin location. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>JST 3 Pin Vertical Plated Through Hole</h3> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> Datasheet referenced for footprint:<a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a> Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_03</li> </ul> <h3>JST 3 Pin Right Angle Plated Through Hole – NO SILK</h3> No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: <ul><li>Pin count:3</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> + - S >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -3 Pin PTH – NO SILK</h3> No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: <ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_03</li> </ul> >NAME >VALUE <h3>Plated Through Hole</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Molex 2-Pin Plated Through-Hole</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST-Right Angle Male Header SMT</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 2mm</li> </ul> <a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> <li>JST_2MM_MALE</li> </ul> >NAME >VALUE <h3>Plated Through Hole</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.15"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST-Vertical Male Header SMT </h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 2mm</li> </ul> <a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value <h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 5mm/197mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Locking Footprint</h3> Holes are staggered by 0.005" from center to hold pins while soldering. Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3> Holes are offset from center by 0.005" to hold pins in place during soldering. Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Long Pads with Locking Footprint</h3> Pins are staggered by 0.005" from center to hold pins in place while soldering. Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3> Holes are offset from center 0.005" to hold pins in place during soldering. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - Long Pads without Silk Outline</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Plated Through Hole - No Silk Outline</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST 2 Pin Right Angle Plated Through Hole</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value + - <h3>Plated Through Hole - 0.1" holes</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.2"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Pogo Pins Connector - No Silk Outline</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3> Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE <h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. No silk outline of connector. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value + - <h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3> tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. Specifications: <ul><li>Pin count: 2</li> <li>Pin pitch:2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> >Name >Value + - <h3>Spring Terminal- PCB Mount 2 Pin PTH</h3> tDocu marks the spring arms Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_02</li> </ul> <h3>2 Pin Screw Terminal - 2.54mm</h3> Specifications: <ul><li>Pin count:2</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_02</li> </ul> >NAME >VALUE 2 pin poke-home connector part number 2062-2P from STA >NAME >VALUE >NAME >VALUE <h3>Plated Through Hole - 4 Pin</h3> Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Molex 4-Pin Plated Through-Hole</h3> Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3> Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 4 Pin</h3> Specifications: <ul><li>Pin count:4</li> <li>Pin pitch: 1.27mm</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 4 Pin Locking Footprint</h3> Pins are offset 0.005" from center to lock pins in place during soldering. Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3> Holes are offset 0.005" from center to lock pins in place during soldering. Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Molex 4-Pin Plated Through-Hole Locking</h3> Holes are offset 0.005" from center to hold pins in place during soldering. Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>SMD - 4 Pin Right Angle Male Header</h3> tDocu layer shows pin locations. Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 4 Pin Long Pads</h3> Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>Plated Through Hole - 4 Pin No Silk Outline</h3> Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>JST Right Angle 4 Pin Plated Through Hole</h3> Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 2mm</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_04</li> </ul> + - S S >NAME >VALUE <h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3> Holes are offset 0.005" from center to hold pins in place during soldering. Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 3.5mm/138mil</li> </ul> <a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>SMD- 4 Pin Right Angle </h3> Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>SMD - 4 Pin Vertical Connector</h3> Specifications: <ul><li>Pin count:4</li> <li>SMD Pad count:8</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3>SMD - 4 Pin w/ Long Solder Pads</h3> No silk, but tDocu layer shows pin position. Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> <h3>JST Vertical 4 Pin Plated Through Hole</h3> Specifications: <ul><li>Pin count: 4</li> <li>Pin pitch: 2mm</li> </ul> <a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a> Example device(s): <ul><li>CONN_04</li> </ul> + - Y B >NAME >VALUE <h3>SMD - 4 Pin Right-Angle Female Header</h3> Silk outline shows header location. Specifications: <ul><li>Pin count:4</li> <li>Pin pitch:0.1"</li> </ul> Example device(s): <ul><li>CONN_04</li> </ul> >NAME >VALUE <h3> 6 Pin SMD Male Header</h3> Specifications: <ul><li>Pin count:6</li> <li>Pin pitch:0.1"</li> </ul> <a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a> Example device(s): <ul><li>CONN_06</li> </ul> >NAME >VALUE <h3>6 Pin Connection</h3> >VALUE >NAME <h3>3 Pin Connection</h3> >VALUE >NAME <h3>2 Pin Connection</h3> >VALUE >NAME <h3>4 Pin Connection</h3> >VALUE >NAME <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> <li><a href="https://www.sparkfun.com/products/9280"> Arduino Stackable Header - 6 Pin</a> (PRT-09280)</li> </ul> For SCREWTERMINALS and SPRING TERMINALS visit here: <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> <li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li> </ul> For SCREWTERMINALS and SPRING TERMINALS visit here: <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> Special notes: Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings. <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> </ul> For SCREWTERMINALS and SPRING TERMINALS visit here: <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> Special notes: Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings. 2.54_SCREWTERM for use with PRT-10571. 3.5mm Screw Terminal footprints for PRT-08084 5mm Screw Terminal footprints for use with PRT-08432 <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> On any of the 0.1 inch spaced packages, you can populate with these: <ul> <li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> <li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> </ul> For SCREWTERMINALS and SPRING TERMINALS visit here: <ul> <li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> </ul> This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. <ul> <li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> <li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> <li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> </ul> Special notes: Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 SN2032: holder for coin-type lithium 3V battery CR2032 Grid 20mm. Doublecheck before using! CR2032 Battery Holder, flat, top mounting >NAME >VALUE >NAME >VALUE LI BATTERY RF Module FTDI Adapter ISP Adapter Battery Holder Auxiliary I/O Ports Sensor Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.