STDOUT vvvvvvvvvvvvvvvvvv #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 1.08kB done #1 DONE 0.0s #2 [internal] load metadata for docker.io/library/python:3.10-slim-bookworm #2 DONE 0.0s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [ 1/16] FROM docker.io/library/python:3.10-slim-bookworm #4 DONE 0.0s #5 [internal] load build context #5 transferring context: 74.23kB done #5 DONE 0.0s #6 [ 4/16] RUN useradd participant #6 CACHED #7 [ 3/16] RUN apt install -y git pkg-config libcairo-dev gcc #7 CACHED #8 [ 6/16] COPY requirements.txt requirements.txt #8 CACHED #9 [ 7/16] RUN pip install -r requirements.txt #9 CACHED #10 [ 2/16] RUN apt update -y #10 CACHED #11 [ 5/16] WORKDIR /home/participant #11 CACHED #12 [ 8/16] COPY fuzzer fuzzer #12 CACHED #13 [ 9/16] COPY *.py ./ #13 DONE 0.1s #14 [10/16] COPY examples ./examples #14 DONE 0.0s #15 [11/16] COPY zshrc /root/.zshrc #15 DONE 0.0s #16 [12/16] RUN apt install -y curl zsh powerline fonts-powerline libpython3-dev wget #16 0.214 #16 0.214 WARNING: apt does not have a stable CLI interface. Use with caution in scripts. #16 0.214 #16 0.216 Reading package lists... #16 0.640 Building dependency tree... #16 0.721 Reading state information... #16 0.822 The following additional packages will be installed: #16 0.822 fontconfig libcurl4 libpcre3 libpython3.11 libpython3.11-dev #16 0.822 python3-powerline python3-psutil zsh-common #16 0.823 Suggested packages: #16 0.823 powerline-doc python3-i3ipc vim-addon-manager python-psutil-doc zsh-doc #16 0.968 The following NEW packages will be installed: #16 0.969 curl fontconfig fonts-powerline libcurl4 libpcre3 libpython3-dev #16 0.969 libpython3.11 libpython3.11-dev powerline python3-powerline python3-psutil #16 0.969 wget zsh zsh-common #16 1.019 0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. #16 1.019 Need to get 14.6 MB of archives. #16 1.019 After this operation, 61.9 MB of additional disk space will be used. #16 1.019 Get:1 http://deb.debian.org/debian bookworm/main amd64 wget amd64 1.21.3-1+b2 [984 kB] #16 1.149 Get:2 http://deb.debian.org/debian bookworm/main amd64 libcurl4 amd64 7.88.1-10+deb12u5 [390 kB] #16 1.180 Get:3 http://deb.debian.org/debian bookworm/main amd64 curl amd64 7.88.1-10+deb12u5 [315 kB] #16 1.221 Get:4 http://deb.debian.org/debian bookworm/main amd64 fontconfig amd64 2.14.1-4 [449 kB] #16 1.765 Get:5 http://deb.debian.org/debian bookworm/main amd64 fonts-powerline all 2.8.3-4 [5568 B] #16 1.769 Get:6 http://deb.debian.org/debian bookworm/main amd64 libpcre3 amd64 2:8.39-15 [341 kB] #16 1.832 Get:7 http://deb.debian.org/debian bookworm/main amd64 libpython3.11 amd64 3.11.2-6 [1988 kB] #16 2.005 Get:8 http://deb.debian.org/debian bookworm/main amd64 libpython3.11-dev amd64 3.11.2-6 [4738 kB] #16 2.402 Get:9 http://deb.debian.org/debian bookworm/main amd64 libpython3-dev amd64 3.11.2-1+b1 [9572 B] #16 2.402 Get:10 http://deb.debian.org/debian bookworm/main amd64 python3-psutil amd64 5.9.4-1+b1 [189 kB] #16 2.418 Get:11 http://deb.debian.org/debian bookworm/main amd64 python3-powerline all 2.8.3-4 [130 kB] #16 2.429 Get:12 http://deb.debian.org/debian bookworm/main amd64 powerline amd64 2.8.3-4 [52.2 kB] #16 2.434 Get:13 http://deb.debian.org/debian bookworm/main amd64 zsh-common all 5.9-4 [4147 kB] #16 2.780 Get:14 http://deb.debian.org/debian bookworm/main amd64 zsh amd64 5.9-4+b2 [908 kB] #16 2.961 debconf: delaying package configuration, since apt-utils is not installed #16 2.983 Fetched 14.6 MB in 2s (7782 kB/s) #16 2.994 Selecting previously unselected package wget. #16 2.994 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18617 files and directories currently installed.) #16 3.002 Preparing to unpack .../00-wget_1.21.3-1+b2_amd64.deb ... #16 3.003 Unpacking wget (1.21.3-1+b2) ... #16 3.065 Selecting previously unselected package libcurl4:amd64. #16 3.066 Preparing to unpack .../01-libcurl4_7.88.1-10+deb12u5_amd64.deb ... #16 3.067 Unpacking libcurl4:amd64 (7.88.1-10+deb12u5) ... #16 3.099 Selecting previously unselected package curl. #16 3.100 Preparing to unpack .../02-curl_7.88.1-10+deb12u5_amd64.deb ... #16 3.100 Unpacking curl (7.88.1-10+deb12u5) ... #16 3.131 Selecting previously unselected package fontconfig. #16 3.133 Preparing to unpack .../03-fontconfig_2.14.1-4_amd64.deb ... #16 3.133 Unpacking fontconfig (2.14.1-4) ... #16 3.154 Selecting previously unselected package fonts-powerline. #16 3.155 Preparing to unpack .../04-fonts-powerline_2.8.3-4_all.deb ... #16 3.155 Unpacking fonts-powerline (2.8.3-4) ... #16 3.173 Selecting previously unselected package libpcre3:amd64. #16 3.175 Preparing to unpack .../05-libpcre3_2%3a8.39-15_amd64.deb ... #16 3.175 Unpacking libpcre3:amd64 (2:8.39-15) ... #16 3.210 Selecting previously unselected package libpython3.11:amd64. #16 3.212 Preparing to unpack .../06-libpython3.11_3.11.2-6_amd64.deb ... #16 3.212 Unpacking libpython3.11:amd64 (3.11.2-6) ... #16 3.375 Selecting previously unselected package libpython3.11-dev:amd64. #16 3.376 Preparing to unpack .../07-libpython3.11-dev_3.11.2-6_amd64.deb ... #16 3.377 Unpacking libpython3.11-dev:amd64 (3.11.2-6) ... #16 3.726 Selecting previously unselected package libpython3-dev:amd64. #16 3.728 Preparing to unpack .../08-libpython3-dev_3.11.2-1+b1_amd64.deb ... #16 3.728 Unpacking libpython3-dev:amd64 (3.11.2-1+b1) ... #16 3.738 Selecting previously unselected package python3-psutil. #16 3.740 Preparing to unpack .../09-python3-psutil_5.9.4-1+b1_amd64.deb ... #16 3.740 Unpacking python3-psutil (5.9.4-1+b1) ... #16 3.761 Selecting previously unselected package python3-powerline. #16 3.763 Preparing to unpack .../10-python3-powerline_2.8.3-4_all.deb ... #16 3.763 Unpacking python3-powerline (2.8.3-4) ... #16 3.785 Selecting previously unselected package powerline. #16 3.786 Preparing to unpack .../11-powerline_2.8.3-4_amd64.deb ... #16 3.787 Unpacking powerline (2.8.3-4) ... #16 3.809 Selecting previously unselected package zsh-common. #16 3.810 Preparing to unpack .../12-zsh-common_5.9-4_all.deb ... #16 3.814 Unpacking zsh-common (5.9-4) ... #16 4.067 Selecting previously unselected package zsh. #16 4.069 Preparing to unpack .../13-zsh_5.9-4+b2_amd64.deb ... #16 4.073 Unpacking zsh (5.9-4+b2) ... #16 4.144 Setting up fontconfig (2.14.1-4) ... #16 4.147 Regenerating fonts cache... done. #16 6.158 Setting up libpython3.11:amd64 (3.11.2-6) ... #16 6.159 Setting up wget (1.21.3-1+b2) ... #16 6.160 Setting up zsh-common (5.9-4) ... #16 6.171 Setting up python3-psutil (5.9.4-1+b1) ... #16 6.370 Setting up libpcre3:amd64 (2:8.39-15) ... #16 6.371 Setting up libpython3.11-dev:amd64 (3.11.2-6) ... #16 6.372 Setting up libcurl4:amd64 (7.88.1-10+deb12u5) ... #16 6.373 Setting up curl (7.88.1-10+deb12u5) ... #16 6.373 Setting up zsh (5.9-4+b2) ... #16 6.380 Setting up fonts-powerline (2.8.3-4) ... #16 6.382 Setting up python3-powerline (2.8.3-4) ... #16 6.572 Setting up libpython3-dev:amd64 (3.11.2-1+b1) ... #16 6.573 Setting up powerline (2.8.3-4) ... #16 6.627 debconf: unable to initialize frontend: Dialog #16 6.627 debconf: (TERM is not set, so the dialog frontend is not usable.) #16 6.627 debconf: falling back to frontend: Readline #16 6.633 debconf: unable to initialize frontend: Readline #16 6.633 debconf: (This frontend requires a controlling tty.) #16 6.633 debconf: falling back to frontend: Teletype #16 6.831 Processing triggers for libc-bin (2.36-9+deb12u7) ... #16 6.839 Processing triggers for debianutils (5.7-0.5~deb12u1) ... #16 6.871 Processing triggers for fontconfig (2.14.1-4) ... #16 DONE 6.9s #17 [13/16] RUN curl --proto '=https' --tlsv1.3 -sSf https://sh.rustup.rs | bash -s -- -y --default-toolchain nightly-2024-05-28 #17 0.987 info: downloading installer #17 3.728 info: profile set to 'default' #17 3.728 info: default host triple is x86_64-unknown-linux-gnu #17 3.728 info: syncing channel updates for 'nightly-2024-05-28-x86_64-unknown-linux-gnu' #17 5.594 info: latest update on 2024-05-28, rust version 1.80.0-nightly (84b40fc90 2024-05-27) #17 5.594 info: downloading component 'cargo' #17 6.874 info: downloading component 'clippy' #17 7.568 info: downloading component 'rust-docs' #17 9.426 info: downloading component 'rust-std' #17 12.21 info: downloading component 'rustc' #17 18.94 info: downloading component 'rustfmt' #17 19.56 info: installing component 'cargo' #17 20.20 info: installing component 'clippy' #17 20.49 info: installing component 'rust-docs' #17 22.07 info: installing component 'rust-std' #17 24.02 info: installing component 'rustc' #17 28.49 info: installing component 'rustfmt' #17 28.81 info: default toolchain set to 'nightly-2024-05-28-x86_64-unknown-linux-gnu' #17 28.81 #17 28.82 nightly-2024-05-28-x86_64-unknown-linux-gnu installed - rustc 1.80.0-nightly (84b40fc90 2024-05-27) #17 28.82 #17 28.82 #17 28.82 Rust is installed now. Great! #17 28.82 #17 28.82 To get started you may need to restart your current shell. #17 28.82 This would reload your PATH environment variable to include #17 28.82 Cargo's bin directory ($HOME/.cargo/bin). #17 28.82 #17 28.82 To configure your current shell, you need to source #17 28.82 the corresponding env file under $HOME/.cargo. #17 28.82 #17 28.82 This is usually done by running one of the following (note the leading DOT): #17 28.82 . "$HOME/.cargo/env" # For sh/bash/zsh/ash/dash/pdksh #17 28.82 source "$HOME/.cargo/env.fish" # For fish #17 DONE 29.9s #18 [14/16] RUN cd fuzzer && cargo build --release #18 0.298 Updating crates.io index #18 3.024 Downloading crates ... #18 3.087 Downloaded ryu v1.0.18 #18 3.092 Downloaded scopeguard v1.2.0 #18 3.094 Downloaded serde_derive v1.0.203 #18 3.103 Downloaded serial_test v2.0.0 #18 3.106 Downloaded serde v1.0.203 #18 3.117 Downloaded serde_json v1.0.117 #18 3.125 Downloaded signal-hook v0.3.17 #18 3.128 Downloaded anstream v0.6.14 #18 3.130 Downloaded serial_test_derive v2.0.0 #18 3.131 Downloaded shlex v1.3.0 #18 3.132 Downloaded anstyle-parse v0.2.4 #18 3.134 Downloaded ahash v0.8.11 #18 3.137 Downloaded typewit_proc_macros v1.8.1 #18 3.137 Downloaded adler v1.0.2 #18 3.139 Downloaded strum v0.25.0 #18 3.144 Downloaded c2rust-bitfields-derive v0.18.0 #18 3.145 Downloaded anstyle v1.0.7 #18 3.153 Downloaded unindent v0.2.3 #18 3.158 Downloaded errno v0.3.9 #18 3.159 Downloaded autocfg v1.3.0 #18 3.161 Downloaded anstyle-query v1.0.3 #18 3.166 Downloaded addr2line v0.21.0 #18 3.170 Downloaded bincode v1.3.3 #18 3.172 Downloaded version_check v0.9.4 #18 3.175 Downloaded signal-hook-mio v0.2.3 #18 3.178 Downloaded strsim v0.11.1 #18 3.181 Downloaded unicode-width v0.1.12 #18 3.183 Downloaded strum_macros v0.25.3 #18 3.192 Downloaded typed-builder-macro v0.16.2 #18 3.196 Downloaded static_assertions v1.1.0 #18 3.198 Downloaded c2rust-bitfields v0.18.0 #18 3.199 Downloaded unicode-xid v0.2.4 #18 3.200 Downloaded typed-builder v0.16.2 #18 3.202 Downloaded mimalloc v0.1.42 #18 3.204 Downloaded xxhash-rust v0.8.10 #18 3.206 Downloaded wait-timeout v0.2.0 #18 3.209 Downloaded utf8parse v0.2.1 #18 3.210 Downloaded signal-hook-registry v1.4.2 #18 3.213 Downloaded is_terminal_polyfill v1.70.0 #18 3.215 Downloaded which v4.4.2 #18 3.217 Downloaded content_inspector v0.2.4 #18 3.219 Downloaded target-lexicon v0.12.14 #18 3.222 Downloaded smallvec v1.13.2 #18 3.229 Downloaded tuple_list v0.1.3 #18 3.235 Downloaded cassowary v0.3.0 #18 3.237 Downloaded heck v0.4.1 #18 3.239 Downloaded meminterval v0.4.1 #18 3.249 Downloaded typewit v1.9.0 #18 3.256 Downloaded unicode-ident v1.0.12 #18 3.259 Downloaded uds v0.4.2 #18 3.273 Downloaded cobs v0.2.3 #18 3.274 Downloaded uuid v1.8.0 #18 3.288 Downloaded hostname v0.3.1 #18 3.289 Downloaded embedded-io v0.4.0 #18 3.291 Downloaded either v1.12.0 #18 3.293 Downloaded cfg-if v1.0.0 #18 3.295 Downloaded ctor v0.2.8 #18 3.298 Downloaded cexpr v0.6.0 #18 3.303 Downloaded unicode-segmentation v1.11.0 #18 3.308 Downloaded home v0.5.9 #18 3.322 Downloaded memoffset v0.9.1 #18 3.324 Downloaded paste v1.0.15 #18 3.327 Downloaded libafl_derive v0.12.0 #18 3.328 Downloaded itoa v1.0.11 #18 3.332 Downloaded rand_core v0.6.4 #18 3.337 Downloaded zerocopy v0.7.34 #18 3.352 Downloaded num_enum_derive v0.7.2 #18 3.353 Downloaded lazycell v1.3.0 #18 3.354 Downloaded num_enum v0.7.2 #18 3.358 Downloaded colorchoice v1.0.1 #18 3.359 Downloaded pyo3-macros v0.21.2 #18 3.360 Downloaded clap_lex v0.7.0 #18 3.362 Downloaded syn v2.0.66 #18 3.373 Downloaded syn v1.0.109 #18 3.390 Downloaded rustc-hash v1.1.0 #18 3.392 Downloaded lazy_static v1.4.0 #18 3.410 Downloaded indoc v2.0.5 #18 3.412 Downloaded glob v0.3.1 #18 3.414 Downloaded dashmap v5.5.3 #18 3.418 Downloaded const_format_proc_macros v0.2.32 #18 3.421 Downloaded getrandom v0.2.15 #18 3.427 Downloaded pyo3-build-config v0.21.2 #18 3.433 Downloaded once_cell v1.19.0 #18 3.435 Downloaded libloading v0.8.3 #18 3.438 Downloaded rustc-demangle v0.1.24 #18 3.445 Downloaded rustversion v1.0.17 #18 3.448 Downloaded quote v1.0.36 #18 3.462 Downloaded bitflags v2.5.0 #18 3.466 Downloaded lock_api v0.4.12 #18 3.467 Downloaded jobserver v0.1.31 #18 3.476 Downloaded const_panic v0.2.8 #18 3.479 Downloaded miniz_oxide v0.7.3 #18 3.485 Downloaded clap v4.5.4 #18 3.493 Downloaded clang-sys v1.8.0 #18 3.495 Downloaded parking_lot_core v0.9.10 #18 3.497 Downloaded proc-macro2 v1.0.84 #18 3.500 Downloaded num-traits v0.2.19 #18 3.502 Downloaded log v0.4.21 #18 3.511 Downloaded parking_lot v0.12.3 #18 3.530 Downloaded pyo3-ffi v0.21.2 #18 3.535 Downloaded postcard v1.0.8 #18 3.545 Downloaded prettyplease v0.2.20 #18 3.554 Downloaded rangemap v1.5.1 #18 3.558 Downloaded cc v1.0.98 #18 3.561 Downloaded pyo3-macros-backend v0.21.2 #18 3.564 Downloaded const_format v0.2.32 #18 3.578 Downloaded libafl_targets v0.12.0 #18 3.596 Downloaded backtrace v0.3.71 #18 3.602 Downloaded minimal-lexical v0.2.1 #18 3.618 Downloaded mio v0.8.11 #18 3.624 Downloaded memchr v2.7.2 #18 3.643 Downloaded aho-corasick v1.1.3 #18 3.650 Downloaded libafl_bolts v0.12.0 #18 3.655 Downloaded crossterm v0.27.0 #18 3.661 Downloaded nom v7.1.3 #18 3.666 Downloaded hashbrown v0.14.5 #18 3.672 Downloaded libm v0.2.8 #18 3.680 Downloaded itertools v0.11.0 #18 3.687 Downloaded itertools v0.12.1 #18 3.710 Downloaded clap_builder v4.5.2 #18 3.735 Downloaded portable-atomic v1.6.0 #18 3.749 Downloaded libmimalloc-sys v0.1.38 #18 3.783 Downloaded bindgen v0.69.4 #18 3.821 Downloaded ratatui v0.23.0 #18 3.833 Downloaded regex v1.10.4 #18 3.846 Downloaded gimli v0.28.1 #18 3.855 Downloaded nix v0.27.1 #18 3.866 Downloaded libafl v0.12.0 #18 3.879 Downloaded object v0.32.2 #18 3.890 Downloaded regex-syntax v0.8.3 #18 3.899 Downloaded rustix v0.38.34 #18 3.938 Downloaded pyo3 v0.21.2 #18 3.960 Downloaded regex-automata v0.4.6 #18 3.979 Downloaded erased-serde v0.3.31 #18 3.981 Downloaded match_cfg v0.1.0 #18 3.996 Downloaded libc v0.2.155 #18 4.078 Downloaded linux-raw-sys v0.4.14 #18 4.174 Compiling proc-macro2 v1.0.84 #18 4.174 Compiling unicode-ident v1.0.12 #18 4.174 Compiling libc v0.2.155 #18 4.174 Compiling once_cell v1.19.0 #18 4.174 Compiling autocfg v1.3.0 #18 4.174 Compiling cfg-if v1.0.0 #18 4.174 Compiling rustversion v1.0.17 #18 4.178 Compiling serde v1.0.203 #18 4.178 Compiling target-lexicon v0.12.14 #18 4.178 Compiling parking_lot_core v0.9.10 #18 4.181 Compiling scopeguard v1.2.0 #18 4.183 Compiling smallvec v1.13.2 #18 4.183 Compiling version_check v0.9.4 #18 4.185 Compiling memchr v2.7.2 #18 4.188 Compiling log v0.4.21 #18 4.189 Compiling glob v0.3.1 #18 4.190 Compiling heck v0.4.1 #18 4.193 Compiling signal-hook v0.3.17 #18 4.193 Compiling rustix v0.38.34 #18 4.195 Compiling zerocopy v0.7.34 #18 4.199 Compiling prettyplease v0.2.20 #18 4.203 Compiling linux-raw-sys v0.4.14 #18 4.203 Compiling syn v1.0.109 #18 4.203 Compiling either v1.12.0 #18 4.204 Compiling regex-syntax v0.8.3 #18 4.204 Compiling bitflags v2.5.0 #18 4.204 Compiling minimal-lexical v0.2.1 #18 4.204 Compiling home v0.5.9 #18 4.204 Compiling adler v1.0.2 #18 4.204 Compiling paste v1.0.15 #18 4.204 Compiling gimli v0.28.1 #18 4.204 Compiling serde_json v1.0.117 #18 4.204 Compiling bindgen v0.69.4 #18 4.204 Compiling libm v0.2.8 #18 4.205 Compiling match_cfg v0.1.0 #18 4.205 Compiling unicode-xid v0.2.4 #18 4.205 Compiling lazycell v1.3.0 #18 4.205 Compiling rustc-demangle v0.1.24 #18 4.205 Compiling typewit_proc_macros v1.8.1 #18 4.205 Compiling itoa v1.0.11 #18 4.205 Compiling indoc v2.0.5 #18 4.205 Compiling rustc-hash v1.1.0 #18 4.205 Compiling ryu v1.0.18 #18 4.205 Compiling lazy_static v1.4.0 #18 4.205 Compiling shlex v1.3.0 #18 4.205 Compiling embedded-io v0.4.0 #18 4.205 Compiling utf8parse v0.2.1 #18 4.205 Compiling cobs v0.2.3 #18 4.206 Compiling tuple_list v0.1.3 #18 4.206 Compiling rand_core v0.6.4 #18 4.206 Compiling static_assertions v1.1.0 #18 4.206 Compiling xxhash-rust v0.8.10 #18 4.206 Compiling cassowary v0.3.0 #18 4.206 Compiling colorchoice v1.0.1 #18 4.206 Compiling portable-atomic v1.6.0 #18 4.206 Compiling is_terminal_polyfill v1.70.0 #18 4.206 Compiling anstyle-query v1.0.3 #18 4.206 Compiling unicode-width v0.1.12 #18 4.206 Compiling anstyle v1.0.7 #18 4.206 Compiling unicode-segmentation v1.11.0 #18 4.206 Compiling strsim v0.11.1 #18 4.206 Compiling clap_lex v0.7.0 #18 4.207 Compiling rangemap v1.5.1 #18 4.207 Compiling unindent v0.2.3 #18 4.313 Compiling libloading v0.8.3 #18 4.356 Compiling ahash v0.8.11 #18 4.379 Compiling lock_api v0.4.12 #18 4.382 Compiling memoffset v0.9.1 #18 4.386 Compiling num-traits v0.2.19 #18 4.398 Compiling clang-sys v1.8.0 #18 4.434 Compiling miniz_oxide v0.7.3 #18 4.469 Compiling itertools v0.12.1 #18 4.501 Compiling anstyle-parse v0.2.4 #18 4.533 Compiling typewit v1.9.0 #18 4.534 Compiling itertools v0.11.0 #18 4.618 Compiling anstream v0.6.14 #18 4.676 Compiling const_panic v0.2.8 #18 4.760 Compiling pyo3-build-config v0.21.2 #18 4.774 Compiling clap_builder v4.5.2 #18 4.784 Compiling quote v1.0.36 #18 4.801 Compiling libafl_bolts v0.12.0 #18 4.801 Compiling libafl v0.12.0 #18 4.820 Compiling nom v7.1.3 #18 4.841 Compiling aho-corasick v1.1.3 #18 4.841 Compiling object v0.32.2 #18 4.841 Compiling content_inspector v0.2.4 #18 4.910 Compiling syn v2.0.66 #18 4.966 Compiling const_format_proc_macros v0.2.32 #18 4.991 Compiling jobserver v0.1.31 #18 5.130 Compiling cc v1.0.98 #18 5.363 Compiling regex-automata v0.4.6 #18 5.422 Compiling const_format v0.2.32 #18 5.520 Compiling signal-hook-registry v1.4.2 #18 5.520 Compiling mio v0.8.11 #18 5.520 Compiling getrandom v0.2.15 #18 5.520 Compiling nix v0.27.1 #18 5.520 Compiling hostname v0.3.1 #18 5.520 Compiling uds v0.4.2 #18 5.520 Compiling wait-timeout v0.2.0 #18 5.631 Compiling pyo3-ffi v0.21.2 #18 5.631 Compiling pyo3 v0.21.2 #18 5.669 Compiling parking_lot v0.12.3 #18 5.790 Compiling signal-hook-mio v0.2.3 #18 5.831 Compiling crossterm v0.27.0 #18 5.881 Compiling which v4.4.2 #18 5.920 Compiling backtrace v0.3.71 #18 5.920 Compiling libmimalloc-sys v0.1.38 #18 6.102 Compiling cexpr v0.6.0 #18 6.243 Compiling addr2line v0.21.0 #18 6.551 Compiling regex v1.10.4 #18 6.560 Compiling clap v4.5.4 #18 7.090 Compiling c2rust-bitfields-derive v0.18.0 #18 7.313 Compiling c2rust-bitfields v0.18.0 #18 7.370 Compiling pyo3-macros-backend v0.21.2 #18 7.808 Compiling serde_derive v1.0.203 #18 7.808 Compiling strum_macros v0.25.3 #18 7.808 Compiling serial_test_derive v2.0.0 #18 7.808 Compiling num_enum_derive v0.7.2 #18 7.808 Compiling typed-builder-macro v0.16.2 #18 7.808 Compiling ctor v0.2.8 #18 7.808 Compiling libafl_derive v0.12.0 #18 8.242 Compiling num_enum v0.7.2 #18 8.289 Compiling typed-builder v0.16.2 #18 8.556 Compiling strum v0.25.0 #18 8.592 Compiling ratatui v0.23.0 #18 9.071 Compiling mimalloc v0.1.42 #18 9.234 Compiling pyo3-macros v0.21.2 #18 10.92 Compiling libafl_targets v0.12.0 #18 11.75 Compiling hashbrown v0.14.5 #18 11.75 Compiling uuid v1.8.0 #18 11.75 Compiling postcard v1.0.8 #18 11.75 Compiling erased-serde v0.3.31 #18 11.75 Compiling meminterval v0.4.1 #18 11.75 Compiling bincode v1.3.3 #18 12.28 Compiling dashmap v5.5.3 #18 12.55 Compiling serial_test v2.0.0 #18 38.16 Compiling summerschool v0.0.1 (/home/participant/fuzzer) #18 38.19 warning: unused import: `Path` #18 38.19 --> src/main.rs:13:12 #18 38.19 | #18 38.19 13 | path::{Path, PathBuf}, #18 38.19 | ^^^^ #18 38.19 | #18 38.19 = note: `#[warn(unused_imports)]` on by default #18 38.19 #18 38.19 warning: unused imports: `HasTargetBytes`, `SimpleRestartingEventManager`, `TracingStage`, and `token_mutations::I2SRandReplace` #18 38.19 --> src/main.rs:20:14 #18 38.19 | #18 38.19 20 | events::{SimpleRestartingEventManager, SimpleEventManager}, #18 38.19 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 38.19 ... #18 38.19 25 | inputs::{BytesInput, HasTargetBytes}, #18 38.19 | ^^^^^^^^^^^^^^ #18 38.19 ... #18 38.19 33 | token_mutations::I2SRandReplace, #18 38.19 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #18 38.19 ... #18 38.19 42 | StdMutationalStage, TracingStage, #18 38.19 | ^^^^^^^^^^^^ #18 38.19 #18 38.19 warning: unused imports: `AsSlice` and `os::dup2` #18 38.19 --> src/main.rs:50:5 #18 38.19 | #18 38.19 50 | os::dup2, #18 38.19 | ^^^^^^^^ #18 38.19 ... #18 38.19 54 | AsSlice, #18 38.19 | ^^^^^^^ #18 38.19 #18 38.19 warning: unused import: `std_edges_map_observer` #18 38.19 --> src/main.rs:60:5 #18 38.19 | #18 38.19 60 | std_edges_map_observer, CmpLogObserver, #18 38.19 | ^^^^^^^^^^^^^^^^^^^^^^ #18 38.19 #18 38.22 warning: use of deprecated method `pyo3::Python::<'py>::import`: `Python::import` will be replaced by `Python::import_bound` in a future PyO3 version #18 38.22 --> src/main.rs:223:21 #18 38.22 | #18 38.22 223 | let pm = py.import("execution")?; // Only do this once #18 38.22 | ^^^^^^ #18 38.22 | #18 38.22 = note: `#[warn(deprecated)]` on by default #18 38.22 #18 38.26 warning: unused import: `Read` #18 38.26 --> src/main.rs:12:16 #18 38.26 | #18 38.26 12 | io::{self, Read, Write}, #18 38.26 | ^^^^ #18 38.26 #18 38.26 warning: unused variable: `c` #18 38.26 --> src/main.rs:101:13 #18 38.26 | #18 38.26 101 | let c = py_list.clone(); #18 38.26 | ^ help: if this is intentional, prefix it with an underscore: `_c` #18 38.26 | #18 38.26 = note: `#[warn(unused_variables)]` on by default #18 38.26 #18 38.26 warning: unused variable: `cmplog_observer` #18 38.26 --> src/main.rs:277:9 #18 38.26 | #18 38.26 277 | let cmplog_observer = CmpLogObserver::new("cmplog", true); #18 38.26 | ^^^^^^^^^^^^^^^ help: if this is intentional, prefix it with an underscore: `_cmplog_observer` #18 38.26 #18 38.29 warning: variable does not need to be mutable #18 38.29 --> src/main.rs:355:9 #18 38.29 | #18 38.29 355 | let mut remapped = remapped.as_mut_slice(); #18 38.29 | ----^^^^^^^^ #18 38.29 | | #18 38.29 | help: remove this `mut` #18 38.29 | #18 38.29 = note: `#[warn(unused_mut)]` on by default #18 38.29 #18 38.30 warning: function `pytrace` is never used #18 38.30 --> src/main.rs:95:4 #18 38.30 | #18 38.30 95 | fn pytrace(input: &BytesInput, module: &Py) { #18 38.30 | ^^^^^^^ #18 38.30 | #18 38.30 = note: `#[warn(dead_code)]` on by default #18 38.30 #18 87.56 warning: `summerschool` (bin "summerschool") generated 10 warnings (run `cargo fix --bin "summerschool"` to apply 5 suggestions) #18 87.56 Finished `release` profile [optimized + debuginfo] target(s) in 1m 27s #18 DONE 87.7s #19 [15/16] RUN sh -c "$(wget -O- https://raw.githubusercontent.com/deluan/zsh-in-docker/master/zsh-in-docker.sh)" -- -t agnoster #19 0.609 --2024-05-29 01:23:25-- https://raw.githubusercontent.com/deluan/zsh-in-docker/master/zsh-in-docker.sh #19 0.618 Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.110.133, 185.199.111.133, ... #19 0.619 Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected. #19 0.629 HTTP request sent, awaiting response... 200 OK #19 0.954 Length: 5426 (5.3K) [text/plain] #19 0.954 Saving to: ‘STDOUT’ #19 0.954 #19 0.954 0K ..... 100% 182M=0s #19 0.954 #19 0.954 2024-05-29 01:23:25 (182 MB/s) - written to stdout [5426/5426] #19 0.954 #19 0.956 #19 0.956 Installing Oh-My-Zsh with: #19 0.956 THEME = agnoster #19 0.956 PLUGINS = #19 0.956 #19 0.957 ###### Installing dependencies for debian #19 0.997 Hit:1 http://deb.debian.org/debian bookworm InRelease #19 0.997 Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] #19 1.010 Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] #19 1.126 Get:4 http://deb.debian.org/debian-security bookworm-security/main amd64 Packages [157 kB] #19 1.167 Fetched 260 kB in 0s (1343 kB/s) #19 1.167 Reading package lists... #19 1.606 Reading package lists... #19 2.030 Building dependency tree... #19 2.112 Reading state information... #19 2.211 git is already the newest version (1:2.39.2-1.1). #19 2.211 curl is already the newest version (7.88.1-10+deb12u5). #19 2.211 zsh is already the newest version (5.9-4+b2). #19 2.211 The following additional packages will be installed: #19 2.212 libc-l10n #19 2.227 The following NEW packages will be installed: #19 2.227 libc-l10n locales #19 2.251 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. #19 2.251 Need to get 4577 kB of archives. #19 2.251 After this operation, 20.7 MB of additional disk space will be used. #19 2.251 Get:1 http://deb.debian.org/debian-security bookworm-security/main amd64 libc-l10n all 2.36-9+deb12u7 [675 kB] #19 2.317 Get:2 http://deb.debian.org/debian-security bookworm-security/main amd64 locales all 2.36-9+deb12u7 [3902 kB] #19 2.760 debconf: delaying package configuration, since apt-utils is not installed #19 2.779 Fetched 4577 kB in 0s (10.7 MB/s) #19 2.790 Selecting previously unselected package libc-l10n. #19 2.790 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20861 files and directories currently installed.) #19 2.798 Preparing to unpack .../libc-l10n_2.36-9+deb12u7_all.deb ... #19 2.799 Unpacking libc-l10n (2.36-9+deb12u7) ... #19 2.861 Selecting previously unselected package locales. #19 2.862 Preparing to unpack .../locales_2.36-9+deb12u7_all.deb ... #19 2.862 Unpacking locales (2.36-9+deb12u7) ... #19 3.189 Setting up libc-l10n (2.36-9+deb12u7) ... #19 3.190 Setting up locales (2.36-9+deb12u7) ... #19 3.246 debconf: unable to initialize frontend: Dialog #19 3.246 debconf: (TERM is not set, so the dialog frontend is not usable.) #19 3.246 debconf: falling back to frontend: Readline #19 3.251 debconf: unable to initialize frontend: Readline #19 3.251 debconf: (This frontend requires a controlling tty.) #19 3.251 debconf: falling back to frontend: Teletype #19 3.560 Generating locales (this might take a while)... #19 3.565 Generation complete. #19 3.606 Reading package lists... #19 4.034 Building dependency tree... #19 4.113 Reading state information... #19 4.224 The following NEW packages will be installed: #19 4.224 locales-all #19 4.245 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. #19 4.245 Need to get 10.7 MB of archives. #19 4.245 After this operation, 233 MB of additional disk space will be used. #19 4.245 Get:1 http://deb.debian.org/debian-security bookworm-security/main amd64 locales-all amd64 2.36-9+deb12u7 [10.7 MB] #19 5.246 debconf: delaying package configuration, since apt-utils is not installed #19 5.263 Fetched 10.7 MB in 1s (11.6 MB/s) #19 5.278 Selecting previously unselected package locales-all. #19 5.278 (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 21519 files and directories currently installed.) #19 5.287 Preparing to unpack .../locales-all_2.36-9+deb12u7_amd64.deb ... #19 5.288 Unpacking locales-all (2.36-9+deb12u7) ... #19 6.403 Setting up locales-all (2.36-9+deb12u7) ... #19 6.420 Generating locales (this might take a while)... #19 6.424 Generation complete. #19 6.430 % Total % Received % Xferd Average Speed Time Time Time Current #19 6.430 Dload Upload Total Spent Left Speed #19 6.430 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 18381 100 18381 0 0 51320 0 --:--:-- --:--:-- --:--:-- 51343 #19 6.791 Cloning Oh My Zsh... #19 7.920 From https://github.com/ohmyzsh/ohmyzsh #19 7.920 * [new branch] master -> origin/master #19 7.990 Already on 'master' #19 7.991 branch 'master' set up to track 'origin/master'. #19 7.991 /tmp #19 7.991 #19 7.991 Looking for an existing zsh config... #19 7.991 Found /root/.zshrc. Backing up to /root/.zshrc.pre-oh-my-zsh #19 7.995 Using the Oh My Zsh template file and adding it to /root/.zshrc. #19 7.998 #19 7.998 __ __ #19 7.998 ____ / /_ ____ ___ __ __ ____ _____/ /_ #19 7.998 / __ \/ __ \ / __ `__ \/ / / / /_ / / ___/ __ \ #19 7.998 / /_/ / / / / / / / / / / /_/ / / /_(__ ) / / / #19 7.998 \____/_/ /_/ /_/ /_/ /_/\__, / /___/____/_/ /_/ #19 7.998 /____/ ....is now installed! #19 7.998 #19 7.998 #19 7.999 Before you scream Oh My Zsh! look over the `.zshrc` file to select plugins, themes, and options. #19 7.999 #19 7.999 • Follow us on Twitter: https://twitter.com/ohmyzsh #19 8.000 • Join our Discord community: https://discord.gg/ohmyzsh #19 8.000 • Get stickers, t-shirts, coffee mugs and more: https://shop.planetargon.com/collections/oh-my-zsh #19 8.000 #19 8.000 Run zsh to try it out. #19 DONE 8.3s #20 [16/16] RUN chsh -s /bin/zsh #20 DONE 0.2s #21 exporting to image #21 exporting layers #21 exporting layers 6.6s done #21 writing image sha256:9b34e81f122c1c09f88cc31e1e0118b6dcfb6917b482f1f9d29464754470ad7f done #21 naming to docker.io/library/student-fuzzer:nbars_competition_fuzzer_private_v0_1_1_1716912398 done #21 DONE 6.6s STDERR vvvvvvvvvvvvvvvvvv