Floral Corners — STL files

Units: millimeters. Exported from the matching current reinforced-mat 3MF.

Import mat.stl and front-ornament.stl together as parts of ONE object.
Keep their original coordinates; do not center, arrange or drop them separately.
Assign the same filament or separate colors. These regions print as ONE front.
The ornament starts above the 0.68 mm mat; it is not a separate physical piece.

TWO COLORS
STL stores geometry, not colors. Assign a filament to each aligned front part
in a multicolor slicer; it schedules the change automatically.
For a manual swap with 0.20 mm first layer, then 0.08 mm layers:
finish layer 7 at Z=0.68 mm, then change BEFORE layer 8 at Z=0.76 mm.
Use your printer's supported pause/change feature. With different or adaptive
layer heights, find the first ornament layer in the preview instead of reusing
layer 8. Use a layer schedule that ends a layer at the 0.68 mm boundary.
For one color, assign both parts the same filament; no swap is needed.

Print back.stl separately, flat side down, with the clips pointing up.
The finished assembly has two physical pieces: front and matching back.
STLs do not store units, colors, plates or slicer settings. Use the project 3MF
to retain those settings, or consult docs/PRINTING.md in the repository.

Source: https://github.com/obartra/baroque-instax-frames
Models: CC0-1.0, within the repository's LICENSING.md scope.
