Product Information

aluminum diamond plate mill finish
Surface Finish: Bright finish, Mill finish
Pattern type: Small five bar,Big five bar,Diamond
Thickness:1.5~4.5mm
Width:1000~1600mm
Length:2000~4000mm

aluminum diamond plate mill finish, aluminium checkered plate, diamond aluminum tread plate, checquered aluminum sheet/coil,
size: 4x8 foot
thickness:2-6mm;
alloy: 1050/1060/3003/5052/5754/6061

 

aluminum diamond plate mill finish is available in a wide array of thicknesses from .063” (1/16”) to .500 (1/2”). We see .125” or 1/8” being the most common size as it provides some rigidity. Common alloys for aluminium checker plate are 3003 and 6061

we can supply one bar, three bars, five bars, and diamond aluminum checker plate, aluminum diamond plate mill finish, aluminum chequered plate from falls on 1 series, 3 series, 5 series and 6 series, widely used in vehicle and ship manufacturing, machinery manufacturing, transportation and storage, construction and decoration, aerospace and other industries.. and thickness from 0.2-8.0mm, and the coil type even can be up to 2650mm.

 

Sizes range for aluminum diamond plate mill finish

Alloy	Temper	Size range (mm)
		Thickness	Width	Length
1050A, 1200	F	1.5-2.4	800-1500	1000-6000
		2.0-6.0	800-1500	1000-8000
	F, H114	1.5-2.0	900-1600	1000-4000
		2.0-8.0	900-2000	1000-9000
5251, 5052, 5754	H114, H224	1.5-2.4	800-1500	1000-6000
		2.4-6.0	800-1500	1000-8000
	F, H114,H224	1.5-2.0	900-1600	700-4000
		2.0-7.0	900-2000	1000-9000
	F, H114	7.0-8.0	900-2000	1000-9000
5154A	F, H114	2.0-6.0	900-1600	1000-9000
5086,5083	F, H114, H224, H116	2.0-6.0	900-1600	1000-9000
6061, 6082	F, 0, T4, T6	1.5-2.0	900-1250	700-4000
		2.0-3.5	900-1600	1000-4000
	F, 0	2.0-3.5	1600-2000	1000-4000
	F, 0, T4, T6	3.5-4.83	900-1250	1000-4000
		3.5-4.83	1250-2000	1000-4000
	F, 0	4.83-6.35	900-2000	1000-4000
3003	H224	1.5-2.0	800-1524	1000-4000
		2.0-2.4	800-1524	1000-6000
		2.4-6.35	800-1524	1000-8000

Sizes range for aluminum diamond plate mill finish

Alloy	Temper	Size range (mm)
		Thickness	Width	Diameter
				Inside	Outside
5251, 5052, 5754	H114, H224	1.5-3.0	800-1500	500, 610	Max.1600
		3.0-6.0	800-1500	750	Max.1600
	F, H114, H224	3.0-7.0	1250-2000	600	Max.1800
	F, H114	7.0-8.0	1250-2000	600	Max.1800
5154A, 5086, 5083	F, H114	3.0-6.0	1250-2000	600	Max.1800
1050A, 1200, 3003	F, H114	3.0-8.0	1250-2000	600	Max.1800
3003	H224	1.42-3.1	800-1524	500, 610	Max.1600

Chemical Properties(WT.%)

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	impurities	Al	note
1050	<0.25	<0.40	<0.05	<0.05	<0.05		<0.05	<0.03	Other, each 0.03	>99.5	V<0.05
1060	<0.25	<0.35	<0.05	<0.03	<0.03		<0.05	<0.03	Other, each 0.03	>99.6	V<0.05
1070	<0.20	<0.25	<0.04	0.03	0.03		0.04	0.03	Other, each 0.03	>99.7	V<0.05
1100	Si +Fe <0.95		0.05-0.20	<0.05			<0.10		Other, each 0.03	>99.00	V<0.05
3003=АМц	<0.6	<0.7	0.05-0.20	1.0-1.5			<0.10		Other,each 0.05, total 0.15
3004	<0.30	<0.7	<0.25	1.0-1.5	0.8-1.3		<0.25		Other,each 0.05, total 0.15
3105	<0.6	<0.7	<0.30	0.30-0.8	0.20-0.8	<0.20	<0.4	<0.10	Other,each 0.05, total 0.15
5052=АМг2.5	<0.25	<0.40	<0.10	<0.10	2.2-2.8	0.15-0.35	<0.10		Other,each 0.05, total 0.15
5083=АМг4.5	<0.40	<0.40	<0.10	0.40-1.0	4.0-4.9	0.05-0.25	<0.25	<0.15	Other,each 0.05, total 0.15
6061=АД33	0.40-0.8	<0.7	0.15-0.40	<0.15	0.8-1.2	0.04-0.35	<0.25	<0.15	Other,each 0.05, total 0.15

Tag

aluminum diamond plate mill finish,aluminum,diamond,plate,mill,finish