========= Changelog ========= * :support:`819 backported (>=1.15,<2.0)` Document how lacking ``gmp`` headers at install time can cause a significant performance hit if you build PyCrypto from source. (Most system-distributed packages already have this enabled.) * :release:`1.16.3 <2016-07-25>` * :bug:`673 (1.16+)` (via :issue:`681`) Fix protocol banner read errors (``SSHException``) which would occasionally pop up when using ``ProxyCommand`` gatewaying. Thanks to ``@Depado`` for the initial report and Paul Kapp for the fix. * :bug:`774 (1.16+)` Add a ``_closed`` private attribute to `~paramiko.channel.Channel` objects so that they continue functioning when used as proxy sockets under Python 3 (e.g. as ``direct-tcpip`` gateways for other Paramiko connections.) * :bug:`758 (1.16+)` Apply type definitions to ``_winapi`` module from `jaraco.windows `_ 3.6.1. This should address issues on Windows platforms that often result in errors like ``ArgumentError: [...] int too long to convert``. Thanks to ``@swohlerLL`` for the report and Jason R. Coombs for the patch. * :release:`1.16.2 <2016-06-21>` * :bug:`520 (1.16+)` (Partial fix) Fix at least one instance of race condition driven threading hangs at end of the Python interpreter session. (Includes a docs update as well - always make sure to ``.close()`` your clients!) * :bug:`537 (1.16+)` Fix a bug in `BufferedPipe.set_event ` which could cause deadlocks/hangs when one uses `select.select` against `~paramiko.channel.Channel` objects (or otherwise calls `Channel.fileno ` after the channel has closed). Thanks to Przemysław Strzelczak for the report & reproduction case, and to Krzysztof Rusek for the fix. * :release:`1.16.1 <2016-04-28>` * :release:`1.15.5 <2016-04-28>` * :bug:`670` Due to an earlier bugfix, less-specific ``Host`` blocks' ``ProxyCommand`` values were overriding ``ProxyCommand none`` in more-specific ``Host`` blocks. This has been fixed in a backwards compatible manner (i.e. ``ProxyCommand none`` continues to appear as a total lack of any ``proxycommand`` key in parsed config structures). Thanks to Pat Brisbin for the catch. * :bug:`676` (via :issue:`677`) Fix a backwards incompatibility issue that cropped up in `SFTPFile.prefetch <~paramiko.sftp_file.prefetch>` re: the erroneously non-optional ``file_size`` parameter. Should only affect users who manually call ``prefetch``. Thanks to ``@stevevanhooser`` for catch & patch. * :bug:`577` (via :issue:`578`; should also fix :issue:`718`, :issue:`560`) Fix stalled/hung SFTP downloads by cleaning up some threading lock issues. Thanks to Stephen C. Pope for the patch. * :bug:`716` Fix a Python 3 compatibility issue when handling two-factor authentication. Thanks to Mateusz Kowalski for the catch & original patch. * :support:`729 backported (>=1.15,<2.0)` Clean up ``setup.py`` to always use ``setuptools``, not doing so was a historical artifact from bygone days. Thanks to Alex Gaynor. * :bug:`617` (aka `fabric/fabric#1429 `_; via :issue:`679`; related: :issue:`678`, :issue:`685`, :issue:`615` & :issue:`616`) Fix up `~paramiko.ssh_exception.NoValidConnectionsError` so it pickles correctly, and fix a related Python 3 compatibility issue. Thanks to Rebecca Schlussel for the report & Marius Gedminas for the patch. * :bug:`613` (via :issue:`619`) Update to ``jaraco.windows`` 3.4.1 to fix some errors related to ``ctypes`` on Windows platforms. Credit to Jason R. Coombs. * :support:`621 backported (>=1.15,<2.0)` Annotate some public attributes on `~paramiko.channel.Channel` such as ``.closed``. Thanks to Sergey Vasilyev for the report. * :bug:`632` Fix logic bug in the SFTP client's callback-calling functionality; previously there was a chance the given callback would fire twice at the end of a transfer. Thanks to ``@ab9-er`` for catch & original patch. * :support:`612 backported (>=1.15,<2.0)` Identify & work around a race condition in the test for handshake timeouts, which was causing frequent test failures for a subset of contributors as well as Travis-CI (usually, but not always, limited to Python 3.5). Props to Ed Kellett for assistance during some of the troubleshooting. * :support:`697 backported (>=1.15,<2.0)` Remove whitespace in our ``setup.py``'s ``install_requires`` as it triggers occasional bugs in some versions of ``setuptools``. Thanks to Justin Lecher for catch & original patch. * :bug:`499` Strip trailing/leading whitespace from lines when parsing SSH config files - this brings things in line with OpenSSH behavior. Thanks to Alfredo Esteban for the original report and Nick Pillitteri for the patch. * :bug:`652` Fix behavior of ``gssapi-with-mic`` auth requests so they fail gracefully (allowing followup via other auth methods) instead of raising an exception. Patch courtesy of ``@jamercee``. * :support:`636 backported (>=1.15,<2.0)` Clean up and enhance the README (and rename it to ``README.rst`` from just ``README``). Thanks to ``@LucasRMehl``. * :release:`1.16.0 <2015-11-04>` * :bug:`194 major` (also :issue:`562`, :issue:`530`, :issue:`576`) Streamline use of ``stat`` when downloading SFTP files via `SFTPClient.get `; this avoids triggering bugs in some off-spec SFTP servers such as IBM Sterling. Thanks to ``@muraleee`` for the initial report and to Torkil Gustavsen for the patch. * :feature:`467` (also :issue:`139`, :issue:`412`) Fully enable two-factor authentication (e.g. when a server requires ``AuthenticationMethods pubkey,keyboard-interactive``). Thanks to ``@perryjrandall`` for the patch and to ``@nevins-b`` and Matt Robenolt for additional support. * :bug:`502 major` Fix 'exec' requests in server mode to use ``get_string`` instead of ``get_text`` to avoid ``UnicodeDecodeError`` on non-UTF-8 input. Thanks to Anselm Kruis for the patch & discussion. * :bug:`401` Fix line number reporting in log output regarding invalid ``known_hosts`` line entries. Thanks to Dylan Thacker-Smith for catch & patch. * :support:`525 backported` Update the vendored Windows API addon to a more recent edition. Also fixes :issue:`193`, :issue:`488`, :issue:`498`. Thanks to Jason Coombs. * :release:`1.15.4 <2015-11-02>` * :release:`1.14.3 <2015-11-02>` * :release:`1.13.4 <2015-11-02>` * :bug:`366` Fix `~paramiko.sftp_attributes.SFTPAttributes` so its string representation doesn't raise exceptions on empty/initialized instances. Patch by Ulrich Petri. * :bug:`359` Use correct attribute name when trying to use Python 3's ``int.bit_length`` method; prior to fix, the Python 2 custom fallback implementation was always used, even on Python 3. Thanks to Alex Gaynor. * :support:`594 backported` Correct some post-Python3-port docstrings to specify ``bytes`` type instead of ``str``. Credit to ``@redixin``. * :bug:`565` Don't explode with ``IndexError`` when reading private key files lacking an ``-----END PRIVATE KEY-----`` footer. Patch courtesy of Prasanna Santhanam. * :feature:`604` Add support for the ``aes192-ctr`` and ``aes192-cbc`` ciphers. Thanks to Michiel Tiller for noticing it was as easy as tweaking some key sizes :D * :feature:`356` (also :issue:`596`, :issue:`365`, :issue:`341`, :issue:`164`, :issue:`581`, and a bunch of other duplicates besides) Add support for SHA-2 based key exchange (kex) algorithm ``diffie-hellman-group-exchange-sha256`` and (H)MAC algorithms ``hmac-sha2-256`` and ``hmac-sha2-512``. This change includes tweaks to debug-level logging regarding algorithm-selection handshakes; the old all-in-one log line is now multiple easier-to-read, printed-at-handshake-time log lines. Thanks to the many people who submitted patches for this functionality and/or assisted in testing those patches. That list includes but is not limited to, and in no particular order: Matthias Witte, Dag Wieers, Ash Berlin, Etienne Perot, Gert van Dijk, ``@GuyShaanan``, Aaron Bieber, ``@cyphase``, and Eric Brown. * :release:`1.15.3 <2015-10-02>` * :support:`554 backported` Fix inaccuracies in the docstring for the ECDSA key class. Thanks to Jared Hance for the patch. * :support:`516 backported` Document `~paramiko.agent.AgentRequestHandler`. Thanks to ``@toejough`` for report & suggestions. * :bug:`496 (1.15+)` Fix a handful of small but critical bugs in Paramiko's GSSAPI support (note: this includes switching from PyCrypo's Random to `os.urandom`). Thanks to Anselm Kruis for catch & patch. * :bug:`491` (combines :issue:`62` and :issue:`439`) Implement timeout functionality to address hangs from dropped network connections and/or failed handshakes. Credit to ``@vazir`` and ``@dacut`` for the original patches and to Olle Lundberg for reimplementation. * :bug:`490` Skip invalid/unparseable lines in ``known_hosts`` files, instead of raising `~paramiko.ssh_exception.SSHException`. This brings Paramiko's behavior more in line with OpenSSH, which silently ignores such input. Catch & patch courtesy of Martin Topholm. * :bug:`404` Print details when displaying `~paramiko.ssh_exception.BadHostKeyException` objects (expected vs received data) instead of just "hey shit broke". Patch credit: Loic Dachary. * :bug:`469` (also :issue:`488`, :issue:`461` and like a dozen others) Fix a typo introduced in the 1.15 release which broke WinPageant support. Thanks to everyone who submitted patches, and to Steve Cohen who was the lucky winner of the cherry-pick lottery. * :bug:`353` (via :issue:`482`) Fix a bug introduced in the Python 3 port which caused ``OverFlowError`` (and other symptoms) in SFTP functionality. Thanks to ``@dboreham`` for leading the troubleshooting charge, and to Scott Maxwell for the final patch. * :support:`582` Fix some old ``setup.py`` related helper code which was breaking ``bdist_dumb`` on Mac OS X. Thanks to Peter Odding for the patch. * :bug:`22 major` Try harder to connect to multiple network families (e.g. IPv4 vs IPv6) in case of connection issues; this helps with problems such as hosts which resolve both IPv4 and IPv6 addresses but are only listening on IPv4. Thanks to Dries Desmet for original report and Torsten Landschoff for the foundational patchset. * :bug:`402` Check to see if an SSH agent is actually present before trying to forward it to the remote end. This replaces what was usually a useless ``TypeError`` with a human-readable `~paramiko.ssh_exception.AuthenticationException`. Credit to Ken Jordan for the fix and Yvan Marques for original report. * :release:`1.15.2 <2014-12-19>` * :release:`1.14.2 <2014-12-19>` * :release:`1.13.3 <2014-12-19>` * :bug:`413` (also :issue:`414`, :issue:`420`, :issue:`454`) Be significantly smarter about polling & timing behavior when running proxy commands, to avoid unnecessary (often 100%!) CPU usage. Major thanks to Jason Dunsmore for report & initial patchset and to Chris Adams & John Morrissey for followup improvements. * :bug:`455` Tweak packet size handling to conform better to the OpenSSH RFCs; this helps address issues with interactive program cursors. Courtesy of Jeff Quast. * :bug:`428` Fix an issue in `~paramiko.file.BufferedFile` (primarily used in the SFTP modules) concerning incorrect behavior by `~paramiko.file.BufferedFile.readlines` on files whose size exceeds the buffer size. Thanks to ``@achapp`` for catch & patch. * :bug:`415` Fix ``ssh_config`` parsing to correctly interpret ``ProxyCommand none`` as the lack of a proxy command, instead of as a literal command string of ``"none"``. Thanks to Richard Spiers for the catch & Sean Johnson for the fix. * :support:`431 backported` Replace handrolled ``ssh_config`` parsing code with use of the ``shlex`` module. Thanks to Yan Kalchevskiy. * :support:`422 backported` Clean up some unused imports. Courtesy of Olle Lundberg. * :support:`421 backported` Modernize threading calls to use newer API. Thanks to Olle Lundberg. * :support:`419 backported` Modernize a bunch of the codebase internals to leverage decorators. Props to ``@beckjake`` for realizing we're no longer on Python 2.2 :D * :bug:`266` Change numbering of `~paramiko.transport.Transport` channels to start at 0 instead of 1 for better compatibility with OpenSSH & certain server implementations which break on 1-indexed channels. Thanks to ``@egroeper`` for catch & patch. * :bug:`459` Tighten up agent connection closure behavior to avoid spurious ``ResourceWarning`` display in some situations. Thanks to ``@tkrapp`` for the catch. * :bug:`429` Server-level debug message logging was overlooked during the Python 3 compatibility update; Python 3 clients attempting to log SSH debug packets encountered type errors. This is now fixed. Thanks to ``@mjmaenpaa`` for the catch. * :bug:`320` Update our win_pageant module to be Python 3 compatible. Thanks to ``@sherbang`` and ``@adamkerz`` for the patches. * :release:`1.15.1 <2014-09-22>` * :bug:`399` SSH agent forwarding (potentially other functionality as well) would hang due to incorrect values passed into the new window size arguments for `.Transport` (thanks to a botched merge). This has been corrected. Thanks to Dylan Thacker-Smith for the report & patch. * :feature:`167` Add `~paramiko.config.SSHConfig.get_hostnames` for easier introspection of a loaded SSH config file or object. Courtesy of Søren Løvborg. * :release:`1.15.0 <2014-09-18>` * :support:`393` Replace internal use of PyCrypto's ``SHA.new`` with the stdlib's ``hashlib.sha1``. Thanks to Alex Gaynor. * :feature:`267` (also :issue:`250`, :issue:`241`, :issue:`228`) Add GSS-API / SSPI (e.g. Kerberos) key exchange and authentication support (:ref:`installation docs here `). Mega thanks to Sebastian Deiß, with assist by Torsten Landschoff. .. note:: Unix users should be aware that the ``python-gssapi`` library (a requirement for using this functionality) only appears to support Python 2.7 and up at this time. * :bug:`346 major` Fix an issue in private key files' encryption salts that could cause tracebacks and file corruption if keys were re-encrypted. Credit to Xavier Nunn. * :feature:`362` Allow users to control the SSH banner timeout. Thanks to Cory Benfield. * :feature:`372` Update default window & packet sizes to more closely adhere to the pertinent RFC; also expose these settings in the public API so they may be overridden by client code. This should address some general speed issues such as :issue:`175`. Big thanks to Olle Lundberg for the update. * :bug:`373 major` Attempt to fix a handful of issues (such as :issue:`354`) related to infinite loops and threading deadlocks. Thanks to Olle Lundberg as well as a handful of community members who provided advice & feedback via IRC. * :support:`374` (also :issue:`375`) Old code cleanup courtesy of Olle Lundberg. * :support:`377` Factor `~paramiko.channel.Channel` openness sanity check into a decorator. Thanks to Olle Lundberg for original patch. * :bug:`298 major` Don't perform point validation on ECDSA keys in ``known_hosts`` files, since a) this can cause significant slowdown when such keys exist, and b) ``known_hosts`` files are implicitly trustworthy. Thanks to Kieran Spear for catch & patch. .. note:: This change bumps up the version requirement for the ``ecdsa`` library to ``0.11``. * :bug:`234 major` Lower logging levels for a few overly-noisy log messages about secure channels. Thanks to David Pursehouse for noticing & contributing the fix. * :feature:`218` Add support for ECDSA private keys on the client side. Thanks to ``@aszlig`` for the patch. * :bug:`335 major` Fix ECDSA key generation (generation of brand new ECDSA keys was broken previously). Thanks to ``@solarw`` for catch & patch. * :feature:`184` Support quoted values in SSH config file parsing. Credit to Yan Kalchevskiy. * :feature:`131` Add a `~paramiko.sftp_client.SFTPClient.listdir_iter` method to `~paramiko.sftp_client.SFTPClient` allowing for more efficient, async/generator based file listings. Thanks to John Begeman. * :support:`378 backported` Minor code cleanup in the SSH config module courtesy of Olle Lundberg. * :support:`249 backported` Consolidate version information into one spot. Thanks to Gabi Davar for the reminder. * :release:`1.14.1 <2014-08-25>` * :release:`1.13.2 <2014-08-25>` * :bug:`376` Be less aggressive about expanding variables in ``ssh_config`` files, which results in a speedup of SSH config parsing. Credit to Olle Lundberg. * :support:`324 backported` A bevvy of documentation typo fixes, courtesy of Roy Wellington. * :bug:`312` `paramiko.transport.Transport` had a bug in its ``__repr__`` which surfaces during errors encountered within its ``__init__``, causing problematic tracebacks in such situations. Thanks to Simon Percivall for catch & patch. * :bug:`272` Fix a bug where ``known_hosts`` parsing hashed the input hostname as well as the hostnames from the ``known_hosts`` file, on every comparison. Thanks to ``@sigmunau`` for final patch and ``@ostacey`` for the original report. * :bug:`239` Add Windows-style CRLF support to SSH config file parsing. Props to Christopher Swenson. * :support:`229 backported` Fix a couple of incorrectly-copied docstrings' ``.. versionadded::`` RST directives. Thanks to Aarni Koskela for the catch. * :support:`169 backported` Minor refactor of `paramiko.sftp_client.SFTPClient.put` thanks to Abhinav Upadhyay. * :bug:`285` (also :issue:`352`) Update our Python 3 ``b()`` compatibility shim to handle ``buffer`` objects correctly; this fixes a frequently reported issue affecting many users, including users of the ``bzr`` software suite. Thanks to ``@basictheprogram`` for the initial report, Jelmer Vernooij for the fix and Andrew Starr-Bochicchio & Jeremy T. Bouse (among others) for discussion & feedback. * :support:`371` Add Travis support & docs update for Python 3.4. Thanks to Olle Lundberg. * :release:`1.14.0 <2014-05-07>` * :release:`1.13.1 <2014-05-07>` * :release:`1.12.4 <2014-05-07>` * :release:`1.11.6 <2014-05-07>` * :bug:`-` `paramiko.file.BufferedFile.read` incorrectly returned text strings after the Python 3 migration, despite bytes being more appropriate for file contents (which may be binary or of an unknown encoding.) This has been addressed. .. note:: `paramiko.file.BufferedFile.readline` continues to return strings, not bytes, as "lines" only make sense for textual data. It assumes UTF-8 by default. This should fix `this issue raised on the Obnam mailing list `_. Thanks to Antoine Brenner for the patch. * :bug:`-` Added self.args for exception classes. Used for unpickling. Related to (`Fabric #986 `_, `Fabric #714 `_). Thanks to Alex Plugaru. * :bug:`-` Fix logging error in sftp_client for filenames containing the '%' character. Thanks to Antoine Brenner. * :bug:`308` Fix regression in dsskey.py that caused sporadic signature verification failures. Thanks to Chris Rose. * :support:`299` Use deterministic signatures for ECDSA keys for improved security. Thanks to Alex Gaynor. * :support:`297` Replace PyCrypto's ``Random`` with `os.urandom` for improved speed and security. Thanks again to Alex. * :support:`295` Swap out a bunch of PyCrypto hash functions with use of `hashlib`. Thanks to Alex Gaynor. * :support:`290` (also :issue:`292`) Add support for building universal (Python 2+3 compatible) wheel files during the release process. Courtesy of Alex Gaynor. * :support:`284` Add Python language trove identifiers to ``setup.py``. Thanks to Alex Gaynor for catch & patch. * :bug:`235` Improve string type testing in a handful of spots (e.g. ``s/if type(x) is str/if isinstance(x, basestring)/g``.) Thanks to ``@ksamuel`` for the report. * :release:`1.13.0 <2014-03-13>` * :release:`1.12.3 <2014-03-13>` * :release:`1.11.5 <2014-03-13>` * :release:`1.10.7 <2014-03-13>` * :feature:`16` **Python 3 support!** Our test suite passes under Python 3, and it (& Fabric's test suite) continues to pass under Python 2. **Python 2.5 is no longer supported with this change!** The merged code was built on many contributors' efforts, both code & feedback. In no particular order, we thank Daniel Goertzen, Ivan Kolodyazhny, Tomi Pieviläinen, Jason R. Coombs, Jan N. Schulze, ``@Lazik``, Dorian Pula, Scott Maxwell, Tshepang Lekhonkhobe, Aaron Meurer, and Dave Halter. * :support:`256 backported` Convert API documentation to Sphinx, yielding a new API docs website to replace the old Epydoc one. Thanks to Olle Lundberg for the initial conversion work. * :bug:`-` Use constant-time hash comparison operations where possible, to protect against `timing-based attacks `_. Thanks to Alex Gaynor for the patch. * :release:`1.12.2 <2014-02-14>` * :release:`1.11.4 <2014-02-14>` * :release:`1.10.6 <2014-02-14>` * :feature:`58` Allow client code to access the stored SSH server banner via `Transport.get_banner `. Thanks to ``@Jhoanor`` for the patch. * :bug:`252` (`Fabric #1020 `_) Enhanced the implementation of ``ProxyCommand`` to avoid a deadlock/hang condition that frequently occurs at ``Transport`` shutdown time. Thanks to Mateusz Kobos, Matthijs van der Vleuten and Guillaume Zitta for the original reports and to Marius Gedminas for helping test nontrivial use cases. * :bug:`268` Fix some missed renames of ``ProxyCommand`` related error classes. Thanks to Marius Gedminas for catch & patch. * :bug:`34` (PR :issue:`35`) Fix SFTP prefetching incompatibility with some SFTP servers regarding request/response ordering. Thanks to Richard Kettlewell. * :bug:`193` (and its attentant PRs :issue:`230` & :issue:`253`) Fix SSH agent problems present on Windows. Thanks to David Hobbs for initial report and to Aarni Koskela & Olle Lundberg for the patches. * :release:`1.12.1 <2014-01-08>` * :release:`1.11.3 <2014-01-08>` * :release:`1.10.5 <2014-01-08>` * :bug:`225 (1.12+)` Note ecdsa requirement in README. Thanks to Amaury Rodriguez for the catch. * :bug:`176` Fix AttributeError bugs in known_hosts file (re)loading. Thanks to Nathan Scowcroft for the patch & Martin Blumenstingl for the initial test case. * :release:`1.12.0 <2013-09-27>` * :release:`1.11.2 <2013-09-27>` * :release:`1.10.4 <2013-09-27>` * :feature:`152` Add tentative support for ECDSA keys. **This adds the ecdsa module as a new dependency of Paramiko.** The module is available at `warner/python-ecdsa on Github `_ and `ecdsa on PyPI `_. * Note that you might still run into problems with key negotiation -- Paramiko picks the first key that the server offers, which might not be what you have in your known_hosts file. * Mega thanks to Ethan Glasser-Camp for the patch. * :feature:`136` Add server-side support for the SSH protocol's 'env' command. Thanks to Benjamin Pollack for the patch. * :bug:`156 (1.11+)` Fix potential deadlock condition when using Channel objects as sockets (e.g. when using SSH gatewaying). Thanks to Steven Noonan and Frank Arnold for catch & patch. * :bug:`179` Fix a missing variable causing errors when an ssh_config file has a non-default AddressFamily set. Thanks to Ed Marshall & Tomaz Muraus for catch & patch. * :bug:`200` Fix an exception-causing typo in ``demo_simple.py``. Thanks to Alex Buchanan for catch & Dave Foster for patch. * :bug:`199` Typo fix in the license header cross-project. Thanks to Armin Ronacher for catch & patch. * :release:`1.11.1 <2013-09-20>` * :release:`1.10.3 <2013-09-20>` * :bug:`162` Clean up HMAC module import to avoid deadlocks in certain uses of SSHClient. Thanks to Gernot Hillier for the catch & suggested fix. * :bug:`36` Fix the port-forwarding demo to avoid file descriptor errors. Thanks to Jonathan Halcrow for catch & patch. * :bug:`168` Update config handling to properly handle multiple 'localforward' and 'remoteforward' keys. Thanks to Emre Yılmaz for the patch. * :release:`1.11.0 <2013-07-26>` * :release:`1.10.2 <2013-07-26>` * :bug:`98 major` On Windows, when interacting with the PuTTY PAgeant, Paramiko now creates the shared memory map with explicit Security Attributes of the user, which is the same technique employed by the canonical PuTTY library to avoid permissions issues when Paramiko is running under a different UAC context than the PuTTY Ageant process. Thanks to Jason R. Coombs for the patch. * :support:`100` Remove use of PyWin32 in ``win_pageant`` module. Module was already dependent on ctypes for constructing appropriate structures and had ctypes implementations of all functionality. Thanks to Jason R. Coombs for the patch. * :bug:`87 major` Ensure updates to ``known_hosts`` files account for any updates to said files after Paramiko initially read them. (Includes related fix to guard against duplicate entries during subsequent ``known_hosts`` loads.) Thanks to ``@sunweaver`` for the contribution. * :bug:`153` (also :issue:`67`) Warn on parse failure when reading known_hosts file. Thanks to ``@glasserc`` for patch. * :bug:`146` Indentation fixes for readability. Thanks to Abhinav Upadhyay for catch & patch. * :release:`1.10.1 <2013-04-05>` * :bug:`142` (`Fabric #811 `_) SFTP put of empty file will still return the attributes of the put file. Thanks to Jason R. Coombs for the patch. * :bug:`154` (`Fabric #876 `_) Forwarded SSH agent connections left stale local pipes lying around, which could cause local (and sometimes remote or network) resource starvation when running many agent-using remote commands. Thanks to Kevin Tegtmeier for catch & patch. * :release:`1.10.0 <2013-03-01>` * :feature:`66` Batch SFTP writes to help speed up file transfers. Thanks to Olle Lundberg for the patch. * :bug:`133 major` Fix handling of window-change events to be on-spec and not attempt to wait for a response from the remote sshd; this fixes problems with less common targets such as some Cisco devices. Thanks to Phillip Heller for catch & patch. * :feature:`93` Overhaul SSH config parsing to be in line with ``man ssh_config`` (& the behavior of ``ssh`` itself), including addition of parameter expansion within config values. Thanks to Olle Lundberg for the patch. * :feature:`110` Honor SSH config ``AddressFamily`` setting when looking up local host's FQDN. Thanks to John Hensley for the patch. * :feature:`128` Defer FQDN resolution until needed, when parsing SSH config files. Thanks to Parantapa Bhattacharya for catch & patch. * :bug:`102 major` Forego random padding for packets when running under ``*-ctr`` ciphers. This corrects some slowdowns on platforms where random byte generation is inefficient (e.g. Windows). Thanks to ``@warthog618`` for catch & patch, and Michael van der Kolff for code/technique review. * :feature:`127` Turn ``SFTPFile`` into a context manager. Thanks to Michael Williamson for the patch. * :feature:`116` Limit ``Message.get_bytes`` to an upper bound of 1MB to protect against potential DoS vectors. Thanks to ``@mvschaik`` for catch & patch. * :feature:`115` Add convenience ``get_pty`` kwarg to ``Client.exec_command`` so users not manually controlling a channel object can still toggle PTY creation. Thanks to Michael van der Kolff for the patch. * :feature:`71` Add ``SFTPClient.putfo`` and ``.getfo`` methods to allow direct uploading/downloading of file-like objects. Thanks to Eric Buehl for the patch. * :feature:`113` Add ``timeout`` parameter to ``SSHClient.exec_command`` for easier setting of the command's internal channel object's timeout. Thanks to Cernov Vladimir for the patch. * :support:`94` Remove duplication of SSH port constant. Thanks to Olle Lundberg for the catch. * :feature:`80` Expose the internal "is closed" property of the file transfer class ``BufferedFile`` as ``.closed``, better conforming to Python's file interface. Thanks to ``@smunaut`` and James Hiscock for catch & patch.