# Nerd-EKO-Gamma Miner fork of the NerdOCTAXE-Gamma design (https://github.com/Patsch91/NerdOCTAXE-Gamma), with 12 x BM1370 (14TH/s SHA256)     - 6 layers PCB - Outer / Inner Copper Weight: 2 oz Design fully tested and validated consume about 230 Watts on 12V for about 14TH/s (Vcore 1100mV, Icore 180A) use a 12V 40A PSU be aware, need some knowledge and tools to build this board ! particulary attention : NEVER power up the board with the Vcore enable without proper heatsink (this will immediatly kill the ASICs !) ## License This hardware design is licensed under the TAPR Open Hardware License – Non-Commercial (OHL-NC). You are free to use, modify, and distribute for **non-commercial purposes**. **Commercial use requires explicit written permission from the copyright holder.** See the [LICENSE](LICENSE) file for details. ## Inspired by [Bitaxe](https://github.com/skot/bitaxe) [NerdAxe](https://github.com/BitMaker-hub) [NerdOCTAXE](https://github.com/Patsch91/NerdOCTAXE-Gamma) [ESP-Miner-NerdQAxePlus](https://github.com/shufps/ESP-Miner-NerdQAxePlus) [OSMU](https://osmu.wiki/)