{
  "info": {
    "version": 3.5
  },
  "printers": {
    "i3_mk2": {
      "name": "i3_mk2",
      "label": "Original Prusa i3 MK2",
      "model": "data/models/PrintBed03.obj",
      "model_offset": [
        0.0,
        0.0,
        0.0
      ],
      "texture": "data/img/PrintBed04.png",
      "texture_from_below": "data/img/PrintBed04_GRID.png",
      "printing_space": [
        250,
        210,
        200
      ],
      "material_parameters_file": "materials_i3_mk2.json",
      "sort": 1,
      "parameters": {
        "retract_lift": 0.6,
        "start_gcode": "M115 U3.1.0 ; tell printer latest fw version\\nM83  ; extruder relative mode\\nM104 S[first_layer_temperature] ; set extruder temp\\nM140 S[first_layer_bed_temperature] ; set bed temp\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG28 W ; home all without mesh bed level\\nG80 ; mesh bed leveling\\nG1 Y-3.0 F1000.0 ; go outside pritn area\\nG1 X60.0 E9.0  F1000.0 ; intro line\\nG1 X100.0 E12.5  F1000.0 ; intro line\\nG92 E0.0",
        "end_gcode": "G4 ; wait\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heatbed\\nM107 ; turn off fan\\nG1 X0 Y200; home X axis\\nM84 ; disable motors"
      }
    },
    "i3_mk2mm": {
      "name": "i3_mk2mm",
      "label": "Original Prusa i3 MK2 MM",
      "model": "data/models/PrintBed03.obj",
      "multimaterial": 4,
      "model_offset": [
        0.0,
        0.0,
        0.0
      ],
      "texture": "data/img/PrintBed04.png",
      "texture_from_below": "data/img/PrintBed04_GRID.png",
      "printing_space": [
        250,
        210,
        200
      ],
      "material_parameters_file": "materials_i3_mk2mm.json",
      "material_mode": "i3_mk2mm_single",
      "sort": 2,
      "printer_type": {
        "0.4mm": {
          "first": 1,
          "sort": 1,
          "name": "0.4mm",
          "label": "Nozzle 0.4mm",
          "parameters": {
            "nozzle_diameter": 0.4
          }
        },
        "0.6mm": {
          "first": 0,
          "sort": 2,
          "name": "0.6mm",
          "label": "Nozzle 0.6mm",
          "parameters": {
            "nozzle_diameter": 0.6,
            "perimeters" : 2,
            "support_material_contact_distance" : 0.25,
            "external_perimeter_extrusion_width": 0.6,
            "extrusion_width": 0.67,
            "perimeter_extrusion_width": 0.65,
            "infill_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.65,
            "top_infill_extrusion_width": 0.57,
            "first_layer_extrusion_width" : 0.65,
            "support_material_extrusion_width" : 0.55,
            "support_material_xy_spacing" : "150%",
            "retract_lift": 0.8,
            "extrusion_multiplier": 1.15            
          }
        }
      },
      "parameters": {
        "retract_lift": 0.6,
        "retract_length": 4,
        "retract_speed": 50,
        "start_gcode": "M115 U3.1.0 ; tell printer latest fw version\\n; Start G-Code sequence START\\nT[initial_tool]\\nM104 S[first_layer_temperature] ; set extruder temp\\nM140 S[first_layer_bed_temperature] ; set bed temp\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG21 ; set units to millimeters\\nG90 ; use absolute coordinates\\nM83 ; use relative distances for extrusion\\nG28 W\\nG80\\nG92 E0.0\\nM203 E100\\nM92 E140\\nG92 E0.0",
        "end_gcode": "M107 ; fan off\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heatbed\\nG28 X0  ; home X axis\\nM84  ; disable motors"
      }
    },
    "i3_mk2mm_single": {
      "name": "i3_mk2mm_single",
      "label": "Original Prusa i3 MK2 MM Single Mode",
      "model": "data/models/PrintBed03.obj",
      "multimaterial": 1,
      "visible": 0,
      "material_mode": "i3_mk2mm",
      "model_offset": [
        0.0,
        0.0,
        0.0
      ],
      "texture": "data/img/PrintBed04.png",
      "texture_from_below": "data/img/PrintBed04_GRID.png",
      "printing_space": [
        250,
        210,
        200
      ],
      "material_parameters_file": "materials_i3_mk2.json",
      "sort": 3,
      "printer_type": {
        "0.4mm": {
          "first": 1,
          "sort": 2,
          "name": "0.4mm",
          "label": "Nozzle 0.4mm",
          "parameters": {
            "nozzle_diameter": 0.4
          }
        },
        "0.6mm": {
          "first": 0,
          "sort": 3,
          "name": "0.6mm",
          "label": "Nozzle 0.6mm",
          "parameters": {
            "nozzle_diameter": 0.6,
            "perimeters" : 2,
            "support_material_contact_distance" : 0.25,
            "external_perimeter_extrusion_width": 0.6,
            "extrusion_width": 0.67,
            "perimeter_extrusion_width": 0.65,
            "infill_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.65,
            "top_infill_extrusion_width": 0.57,
            "first_layer_extrusion_width" : 0.65,
            "support_material_extrusion_width" : 0.55,
            "retract_lift": 0.8,
            "extrusion_multiplier": 1.15            
          }
        }
      },
      "parameters": {
        "retract_lift": 0.6,
        "retract_length": 4,
        "retract_speed": 50,
        "start_gcode": "M115 U3.1.0 ; tell printer latest fw version\\n; Start G-Code sequence START\\nT?\\nM104 S[first_layer_temperature]\\nM140 S[first_layer_bed_temperature]\\nM109 S[first_layer_temperature]\\nM190 S[first_layer_bed_temperature]\\nG21 ; set units to millimeters\\nG90 ; use absolute coordinates\\nM83 ; use relative distances for extrusion\\nG28 W\\nG80\\nG92 E0.0\\nM203 E100\\nM92 E140\\nG1 Z0.250 F7200.000\\nG1 X50.0 E80.0  F1000.0\\nG1 X160.0 E20.0  F1000.0\\nG1 Z0.200 F7200.000\\nG1 X220.0 E13 F1000.0\\nG1 X240.0 E0 F1000.0\\nG1 E-4 F1000.0\\nG92 E0.0",
        "end_gcode": "G1 E-4 F2100.00000\\nG91\\nG1 Z1 F7200.000\\nG90\\nG1 X245 Y1\\nG1 X240 E4\\nG1 F4000\\nG1 X190 E2.7\\nG1 F4600\\nG1 X110 E2.8\\nG1 F5200\\nG1 X40 E3 \\n G1 E-15.0000 F5000\\nG1 E-50.0000 F5400\\nG1 E-15.0000 F3000\\nG1 E-12.0000 F2000\\nG1 F1600\\nG1 X0 Y1 E3.0000\\nG1 X50 Y1 E-5.0000\\nG1 F2000\\nG1 X0 Y1 E5.0000\\nG1 X50 Y1 E-5.0000\\nG1 F2400\\nG1 X0 Y1 E5.0000\\nG1 X50 Y1 E-5.0000\\nG1 F2400\\nG1 X0 Y1 E5.0000\\nG1 X50 Y1 E-3.0000\\nG4 S0\\nM107 ; fan off\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heatbed\\nG28 X0  ; home X axis\\nM84     ; disable motors"
      }
    },
    "i3_mk3": {
      "name": "i3_mk3",
      "label": "Original Prusa i3 MK3",
      "model": "data/models/MK3.obj",
      "model_offset": [
        0.0,
        0.0,
        0.0
      ],
      "texture": "data/img/MK3.png",
      "texture_from_below": "data/img/MK3_bottom_alpha.png",
      "printing_space": [
        250,
        210,
        210
      ],
      "material_parameters_file": "materials_i3_mk3.json",
      "sort": 4,
      "parameters": {
        "retract_lift": 0.6,
        "retract_lift_above": 0,
        "retract_lift_below": 209,
        "start_gcode": "M115 U3.4.0 ; tell printer latest fw version\\nM83  ; extruder relative mode\\nM104 S[first_layer_temperature] ; set extruder temp\\nM140 S[first_layer_bed_temperature] ; set bed temp\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG28 W ; home all without mesh bed level\\nG80 ; mesh bed leveling\\nG1 Y-3.0 F1000.0 ; go outside print area\\nG92 E0.0\\nG1 X60.0 E9.0  F1000.0 ; intro line\\nG1 X100.0 E12.5  F1000.0 ; intro line\\nG92 E0.0\\nM221 S95",
        "end_gcode": "G4 ; wait\\nM221 S100\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heatbed\\nM107 ; turn off fan\\nG1 X0 Y200; home X axis\\nM84 ; disable motors"
      }
    },
    "default": {
      "name": "default",
      "label": "",
      "model": "data/models/mk2_heatbed.stl",
      "multimaterial": 1,
      "visible": 1,
      "material_mode": "",
      "model_offset": [
        0.0,
        1.1,
        -0.21
      ],
      "texture": "data/img/checker.png",
      "texture_from_below": "data/img/checker.png",
      "printing_space": [
        200,
        200,
        200
      ],
      "parameters": {
        "gcode_flavor": "reprap",
        "start_gcode": "M115 U3.1.0 ; tell printer latest fw version\\nM83  ; extruder relative mode\\nM104 S[first_layer_temperature] ; set extruder temp\\nM140 S[first_layer_bed_temperature] ; set bed temp\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG28 W ; home all without mesh bed level\\nG80 ; mesh bed leveling\\nG1 Y-3.0 F1000.0 ; go outside pritn area\\nG1 X60.0 E9.0  F1000.0 ; intro line\\nG1 X100.0 E12.5  F1000.0 ; intro line\\nG92 E0.0",
        "end_gcode": "G4 ; wait\\nM104 S0 ; turn off temperature\\nM140 S0 ; turn off heatbed\\nM107 ; turn off fan\\nG1 X0 Y200; home X axis\\nM84 ; disable motors",
        "end_filament_gcode": "; Filament-specific end gcode",
        "bed_shape": "0x0,250x0,250x210,0x210",
        "before_layer_gcode": ";BEFORE_LAYER_CHANGE\\nG92 E0.0\\n;[layer_z]\\n\\n",
        "extruder_offset": "0x0",
        "layer_gcode": "",
        "octoprint_apikey": "",
        "octoprint_host": "",
        "pressure_advance": 0,
        "printer_settings_id": "",
        "retract_before_travel": 1,
        "retract_layer_change": 1,
        "retract_length": 0.8,
        "retract_length_toolchange": 3,
        "retract_lift": 0.6,
        "retract_lift_above": 0,
        "retract_lift_below": 199,
        "retract_restart_extra": 0,
        "retract_restart_extra_toolchange": 0,
        "retract_speed": 35,
        "serial_port": "",
        "serial_speed": 250000,
        "toolchange_gcode": "",
        "use_firmware_retraction": 0,
        "use_relative_e_distances": 1,
        "use_volumetric_e": 0,
        "vibration_limit": 0,
        "wipe": 1,
        "z_offset": 0,
        "threads": 4
      },
      "material_parameters_file": "",
      "sort": 99,
      "printer_type": {
        "0.4mm": {
          "first": 1,
          "sort": 2,
          "name": "0.4mm",
          "label": "Nozzle 0.4mm",
          "parameters": {
            "nozzle_diameter": 0.4
          }
        },
        "0.25mm": {
          "first": 0,
          "sort": 1,
          "name": "0.25mm",
          "label": "Nozzle 0.25mm",
          "parameters": {
            "nozzle_diameter": 0.25,
            "retract_length": 1,
            "retract_speed": 50,
            "external_perimeter_extrusion_width": 0.25,
            "extrusion_width": 0.25,
            "infill_extrusion_width": 0.25,
            "perimeter_extrusion_width": 0.25,
            "solid_infill_extrusion_width": 0.25,
            "first_layer_extrusion_width" : 0.25,
            "top_infill_extrusion_width": 0.25,
            "max_volumetric_speed" : 0.7,
            "support_material_spacing" : 1.5,
            "support_material_xy_spacing" : "120%",
            "support_material_extrusion_width" : 0.22
          }
        },
        "0.6mm": {
          "first": 0,
          "sort": 3,
          "name": "0.6mm",
          "label": "Nozzle 0.6mm",
          "parameters": {
            "nozzle_diameter": 0.6,
            "perimeters" : 2,
            "support_material_contact_distance" : 0.25,
            "external_perimeter_extrusion_width": 0.6,
            "extrusion_width": 0.67,
            "perimeter_extrusion_width": 0.65,
            "infill_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.65,
            "top_infill_extrusion_width": 0.57,
            "first_layer_extrusion_width" : 0.65,
            "support_material_extrusion_width" : 0.55,
            "support_material_xy_spacing" : "150%",
            "retract_lift": 0.8,
            "extrusion_multiplier": 1.15            
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "nozzle_diameter": 0.4
          }
        }
      }
    }
  }
}