# 1.1.13

* Update Polish and Russian translations.
* Fix bug in suspend and resume callback
* Add choices universe for backlight setting
* Add simplify diversion.py and add unit tests
* Get and use current host number for K375sFnSwap because of bug in firmware of MX Keys S
* Fix bug with logo in about window
* Don't ping device just to get logging information
* Optimize write for per-key lighting
* Add and initialize per-key lighting to a special no-change value
* Remove some Python 2 compatibility code
* Update French translation
* Refactor rule loading for testability

# 1.1.12

* Check for existence of keys file before opening
* Perform translation for all translatable strings.
* Add included hid_parser to packages installed
* Improve label and description for LED zone settings
* Add message about Onboard Profiles to LED Zone settings
* Initialize device registers to empty list
* Use bluez dbus signals to disconnect and connect bluetooth devices
* Handle a different signal for onboard profiles directory in ROM
* Introduce small delay in getting pairing information to let receiver settle after pairing
* Improve testing for settings_templates, settings, hidpp20, and device and fix small bugs found
* Add extended adjustable DPI setting
* Improve and extend infrastructure for testing setting_templates
* Update Greek, Polish, Russian, and Traditional Chinese translations
* Implement and test per-key lighting
* Refactor and test pair_window in GUI
* Handle situation when read of a setting fails in GUI
* Permit continuing when a read during pushing fails
* Fix bug in LEDZoneSetting when effect is not implemented
* Add tests for LEDEffect structures in hidpp20
* Handle BRIGHTNESS_CONTROL notifications
* Add settings for BRIGHTNESS_CONTROL and RGB_EFFECTS features
* Fix small bugs found from testing in settings
* Use f-strings for more exceptions and log message
* Tests for setting_templates
* Simple change in settings to improve testability
* Use feature_request from the device everywhere in hidpp20
* Fix bug in backlight 2 durations
* Replace deprecated code constructs
* Set up test data and classes to help test HID++ interactions
* Use pytest to test code for logitech_receiver modules
* Align init methods for all receiver classes
* Start refactoring of code base
* Allow sub-second delays in Later
* Fix bug in setting configuration cookie due to bad documentation
* Use ruff for code styling and linting
* Upgrade string formating to f-string
* Document battery-icons=solaar option
* Tell devices to delay device sending first messages until configuration is done
* Optimize some functions in FeaturesArray
* Fix bug in creating features array
* Fix bug in building battery line in show
* Refactor diversion_rules
* Fix bug in determining tray icon
* Fix bug in getting friendly name
* Move status information to Device and Receiver objects
* Add tests for get_kind_from_index and base product information
* Update EX100 documentation
* Use object attributes instead of dictionary in status objects
* Create subclasses of receiver for different variants
* Add requirement for CONFIG_HIDRAW to documentation
* Add some low-level tests for some hidpp20 functions, profiles, and lighting and some hidpp10 tests
* Fix app name casing in UI
* Add missing receiver type for Lightspeed receivers
* Add new device types
* Refactor device and receiver instantiation
* Simplify naming of distribution files
* Clean up some logging code
* Remove duplicated code to read register
* Introduce Hidpp20 and Hidpp10 class
* Remove unnecessary calls of del
* Fix bug when reading BACKLIGHT setting from device
* Replace invalid hidpp10 and hidpp20 usages
* Use only timer thread to save config.yaml
* Improve README
* Copy newer version of hid_parser
* Reorder code in settings
* Update installation documentation
* Add missing license blocks
* Clean up listener and notifications code
* Add locks to prevent multiple persisters for device
* Clean up configuration, device, and receiver code
* Move battery constants common to HID++ 1.0 and 2.0 to common
* Move mapping of device kind into hidpp20
* Move pairing information gathering to receiver
* update contributors
* Expand allowable profile numbers
* Clean up __init__ in logitech_receiver
* Modify pre-commit args to make ruff change files
* Fix bug in hidpp20 get host names
* Use ruff for formatting and linting
* Fix bug in rule Set action
* Add notify module to logitech_receiver
* Implement setting_changed callback and pass in to new devices and receivers
* Add callback to call when changing a setting
* Move exceptions, hidpp20 and hidpp10 constants into new modules
* Streamline status code
* Upgrade debugging in udev
* Fix deprecated GitHub actions
* Extend makefile and tests
* Improve features array
* Move ui_async to common.py
* Improve module imports
* Add tests of common module

# 1.1.11

* Rename light icons and install them in correct place
* Setup macOS tests using GitHub action (#2284)
* Better checking for setting in record_setting
* Fix invalid func name set logo name
* Simplify installation of udev rules
* Add document on implementation
* Tidy up scrolling appearance in configuration panel
* Correctly handle profile button with no action
* Don't unlock setting when changed by external means
* Refactor code to record change to setting
* Add GitHub action for tests
* Introduce tests with pytest
* Simplify logger instantiation
* Update label and tooltip for divert-gkeys setting
* Don't lock setting when an error occurs
* Catch assertion errors when reading setting values from devices
* Support LED Zone control feature
* Dump and load device profiles
* Select among profiles.
* Support backlight levels and duration
* Use "Report Rate" instead of "Polling" for movement report rate
* Support extended report rate setting
* Add stable branch to release.sh (#2236)
* Fix changelog parsing in release.sh
* Update installation.md with new udev rules location
* Downgrade assertion on missing notification flag to warning
* Write empty file if there are no rules to save
* Be defensive in device error messages
* Add descriptions of M650, PRO X 2, G915, MX Anywhere 2S, G305, and MX Keys S
* Report hidraw node in debugging messages
* Add names for new Logitech features
* Update Spanish, French, and Polish translations
* Defend against lightspeed receivers that contact devices for basic information
* Remove incorrect feature for M325 mice
* Add K845 keyboard
* Add partial support for macOS and minimal support for Windows
* Correctly enumerate devices on receiver
* Add wording in documentation about Logitech reusing model numbers
* Better handling and installation of icons
* Catch errors when pinging to try to put device online
* Be more cautious when creating log messages to avoid exceptions
* Correctly handle NoSuchDevice exception when pinging device
* Fix test in rules for device equality
* Add installation instructions for pipx and add not about other GTK system packages
* Fix bug in NamedInt
* Add support for MK550
* Install udev rule files to correct placces
* Expand expected ping responses
* Update codename when device status changes

# 1.1.10

* Add information about NixOS flake package
* Permit bluetooth devices in hidconsole
* Add descriptor for Logitech MX Revolution Mouse M-RCL 124
* Improve determination for short and long messages
* Add descriptor for G500s
* Fix bug in scan-registers
* Add single depress and release options for rule mouse click action
* Add rule condition for hostname
* Update keysym generation to current list of keysyms
* Allow device 0 in hidconsole
* Upgrade messages when no supported device found
* Documentation update for the gnome extension for better Solaar rule support
* Remove udev-acl tag from udev rules
* Add support for process condition in Wayland
* Update French, Chinese, and German translations
* Add G733 Headset
* Restore tools/clean.sh
* Add Bluetooth Keyboard C714
* Update several device descriptions
* Update scan-registers.sh
* Remove assertion on last byte of ping responses
* Add symbolic version of solaar icon
* Fix bug when finding name or codename
* Update documentation
* Put version in initial INFO logging message

# 1.1.9

* Add descriptors for G535 wireless gaming headset and wireless keyboard EX110
* Update Greek translation
* Fix minor issues in documentation
* Remove some deprecated GTK code
* Use zero exit code for kill interrupts
* Add rule Test condition for battery charging
* Get wpid for 28Mz devices from udev when enumerating
* Add Device condition to rules
* Don't show wireless link or battery information when unknown or not present
* Add desccriptor for G9x and LX7 mice
* Fix bug in determining kind of devices for 27Mz receivers
* Set initial lock status of smooth scrolling features to ignore
* Fix glitch in configuration file update when changing versions
* Add more debugging output for rules
* Clean up pinging code
* Put initial ping of direct-connected devices inside listener thread
* Read and check before write of range settings
* Improve pairing determination
* Cut off determination of receiver devices when all have been found
* Remove derived configuration fields when Solaar version changes
* Allow device descriptors without name and codename
* Filter and escape technical detail fields
* Add setting for ADC power managemen
* Correctly determine whether to ping with a long HID++ message
* Add description for K470 keyboard from the MK470 combo (#1945)
* Add setting value for mouse gestures
* Update German and French translations
* Remove old clean.sh and monitor.py tools
* Retry opening device if permissions error encountered
* Better handlling of IO errors at device creation
* Add KeyIsDown rule condition to check whether a diverted key is down
* Clean up device and receiver creation

# 1.1.8

* Add parameter to thumb wheel rule conditions
* Rename Serbian translation file
* Update Polish translation
* Improve handling of wheel notifications
* Only record changes of scroll wheel ratchet
* Don't mark setting as absent if there are device errors
* More robust access to keyword exception fields
* Add support for config change feature
* Clean up GTK code
* Update documentation on mouse gestures and known issues
* Get commit information from git describe and dpkg-parsechangelog
* Update pre-commit tools to current versions
* Update installation instructions
* Add 8-character commit hash to version information
* Update solaar.desktop (#1857)
* Get release in setup.py by reading lib/solaar/__init__.py
* Remove version number from docs/_config.yml
* Update solaar.desktop
* Update es.po
* Clarify status of C542 receiver
* Update devices directory
* Add description of several devices
* Show name of disconnecting receiver or device in disconnect warning
* Reduce standard size of rule editor window
* Remove unnecessary dependency on typing_extensions

# 1.1.7

* Add dependency on typing_extension to setup.py
* Don't defer saves in CLI and don't require Gtk in CLI
* Be more permissive in recognizing HID++ report descriptors
* Update Polish and Croatian translations
* Switch scroll ratcheting in response to scroll ratchet button notification
* Add setting to turn scroll ratchet on and off
* Eliminate visual glitch when updating range setting
* Make hid-parser an optional dependency

# 1.1.6

* Only update remaining pairings after successful pairing
* Check for presence of status attribute when resuming
* Update Polish and Croation translations
* Don't add non-existant key in raw xy processing
* Add special keys from MX Mechanical Mini
* Fix processing of HID++ 1.0 battery reports
* Use report descriptors to determine suitable devices
* Handle exceptions when processing configuration file
* Add Logitech PRO Gaming Keyboard
* Fix bad entries in divert-keys when found
* Correctly convert old-style diversions to new style and remove old ones
* Add optional save argument to write_key_value methods
* Use device name in configuration entries if device modelId is zeroes
* Don't show normal DJ messages in debug log
* Add Later rule action
* Correctly record battery feature when ADC produces error
* Print feature call errors in solaar show instead of terminating
* Use ADC notifications to set device inactive and active
* Add one to feature count to count ROOT feature
* Don't check modifiers for KeyPress actions that are not clicks
* Augment comments on what Solaar cannot do
* Fix bug in printing closed handle
* Use only product records to determine which receivers unpair
* Add conditional delay to get around race with Linux HID++ driver

# 1.1.5

* Add G213 Prodigy Gaming Keyboard
* Update Turkish, Croation, and zh_CN translations
* Move old device descriptions to new locations and clean up
* Increase minimum stopped time between mouse movements
* Fix bug with non-recognized empty mouse movement
* Allow config panel to scroll
* Add descriptions for K360 4004, MX Master 4017, Lightspeed C541, and G915 407D
* Change security tooltip for unencrypted wireless connections
* Add Norwegian Bokmal translation
* Update documentation on continuously running GUI, diverted keys, and changing hosts
* Solaar config no longer applies settings
* Add description of rule components to rule editor
* Ignore first movement for mouse gestures when reprog controls version is 5 or more
* Add Active rule condition to test whether a device is active
* Terminate iteration over receiver devices when all have been found
* Downgrade Set prolem messages from error to warning
* Log informational messages and above to a temporary file
* Don't produce warnings when editing rules in rule editor
* Fix bug that didn't save rules file if there were no rules
* Allow devices with connection number larger than max_devices
* Show more registers in solaar probe
* Show feature versions in solaar show
* Fix problems with deleting devices on exit
* Update German translation
* Update device documentation directory
* Add descriptors for G502 Proteus Spectrum Optical Mouse and G935 headset
* Record feature versions
* Add Serbian translation
* Fix circular import in rules
* Keep track of devices and use in rules
* Update zh_CN and zh_TW translations
* Convert old-style mouse gestures and sliding dpi settings to new style
* Allow multiple keys for mouse gestures and sliding dpi
* Defer saving configuration file for a while to cut down on the number if times it is saved
* Use correct functions for unified battery and battery voltage features.
* Add defensive check for missing keys array in mouse gestures setting
* Better presentation of battery information
* Add support for ADC MEASUREMENT battery feature
* Add information on how to find divertable key names in solaar show output
* Better warnings for feature call errors with reprogrammable key and gesture settings
* Increase entry size for ChoiceControlBig

# 1.1.4

* Update Croatian translation
* Handle unanticipated values for persistent remappable action as default
* Improve system tray interface documentation
* Remove blank lines from system tray popup
* Update Polish translation
* Add depress and release options to KeyPress rule action
* Only close existing devices for receiver
* Differentiate debug messages for different setting types
* Implement packed range setting in config panel
* Only produce warning for unimplemented display of setting
* Add sidetone and equalizer settings for headsets
* Add packed ranges setting
* Use built-ins for conversions between int and byte string
* Don't add HI_RES wheel ecodes to evdev device codes
* Handle null key in persistent remappable actions when device does not respond
* Consult polling rate feature for polling rate
* Eliminate extra file handles
* Close file handles for receiver-connected devices
* Access to more keys in KeyPress rule action when in other keyboard groups
* Update Turkish translation
* Put battery levels in tray menu labels
* Reduce warnings for inaccessible keys in KeyPress rule action
* Better determination of keycodes and insert needed shifts in KeyPress actions.
* Be careful when processing notifications for partly set up devices.
* Clear out fields for empty persistent remappable action.
* Fix message generation when device is offline.
* Fix bug in feature lookup.
* Add support for G533 Headset and G502 Gaming Mouse
* Improve device features handling.
* Keep trying settings that have worked in the past.
* Store None in persisters for non-persisting settings.
* Only create configuration entries for off-line devices if they have a serial number.

# 1.1.3

* Update documentation files
* Lower remove python 3.7 constructs and lower python dependency to 3.6
* Fix bug in xtest mouse scrolling
* Allow mouse gesture setting for non-mice, e.g., trackballs
* Print message when there is another Solaar process running
* Fix determination of whether to force read before writing boolean setting
* Add recent diversion features to default list in rules UI
* Add setting to divert hires scroll wheel
* Don't use device kind to determine how to handle notifications
* Update Polish, Russian, and zh_CN translations
* Remove pggettext so as to not require Python 3.8
* Remove Python 2 unicode support
* Store keys in configuration file as int instead of str
* Use yaml for configuration file instead of json.
* Remove process-dependent rules from built-in rules.
* Handle situation where GTK application cannot be set up in CLI.
* Remove obsolete upower signals.
* Appinfo/metadata fixes including using correct APP_ID.
* Fix bugs in solaar config.
* Add full set of mouse buttons in persistent remappable actions setting.
* Improve rule behaviour under Wayland and when Xtest or X11 not available.
* Fix up and document dependencies (evdev, Python, ...).

# 1.1.2

* Update documentation on supported devices and translations
* Include evdev as a dependency
* Try to use uinput for fake input if XTest extension not available
* Add Nano receiver C542 for M190 mice
* Broaden range of HID++ Bluetooth devices
* Add setting to divert gestures
* Rule editor can edit all rule components
* Configuration via solaar config takes effect in Solaar UI if it is running
* Add setting to disable Onboard Profiles and decouple from Polling Rate setting
* Add setting for PERSISTENT_REMAPPABLE_ACTION, common keyboard and mouse cases only
* Split Test rule condition into Test and TestBytes and support in rule editor
* Fix bug in speed-change setting
* Support Backlight3 feature
* Ensure that settings are pushed in resume
* Update German, Polish,  and zh_CN translations
* Determine device number for direct-connected devices from protocol
* fix bug in add and delete button actions in rule editor
* dispose of no-op notifications quickly
* add rule condition for checking device settings
* use local file for conversion from key names to keysyms
* get keyboard group and use to get correct keycodes (X11 only)
* improve how rules work under Wayland
* add settings for M-Key LEDs and MR-Key LED
* fix bug in unpacking M and MR key notification
* add G815 keyboard and MX518 mouse
* add new special keys for recent keyboards
* track M and MR keys for use in rules
* make sure that device is online when searching for devices in solaar show
* don't check for device kind in dpi sliding setting
* fix problem with devices that report 0 DPI
* handle missing divert-setting in action RW for settings
* add id property (unitId or serial) and don't use ? for unknown serial
* fix contains for NamedInts and eliminate use of has_element
* check for xtest and disable modifier checking if not available
* improve determination of gesture information
* add Set rules to rule GUI
* add gesture params to Set rules
* hide system tray when there are no devices to control
* add G733 headset, G9 mouse, G502 Hero mouse
* Use greyscale solaar icon in tray when using symbolic icons
* Fix bugs in solaar config
* Use classes for settings to hep with modularity
* Accept '~' and Toggle for toggling boolean settings in cli and rules
* handle errors when writing to devices
* refactor config_panel.py to use classes for widgets
* add rules action to set Solaar settings
* decrease amount of logging at each debug level
* don't stretch toggles in settings
* use key structure for key remapping setting
* optimize ReprogrammableKey implementation
* keep track of settings that are absent from device
* add G512 keyboard and G402 mouse
* reformat descriptors.py
* use feature numbers for reprogrammable key versions
* don't use new_from_icon_set in menu as it is deprecated

# 1.1.1

* Keep left pane in Solaar main window the same size
* Fix crash when checking a process condition when X11 not running
* Add version number to output of solaar show
* Fix crash when pinging a device with unknown protocol
* Display battery percentage estimates from battery voltage
* Add minimal support for Logitech PRO X Wireless Gaming Headset
* Push settings when device requests software reconfiguration
* Fix read for key/button diversion setting
* Add modalias information to Solaar metainfo
* Don't do on-screen notifications when devices are powered on
* Add setting to switch crown between smooth and ratchet scrolling
* Add write_prefix_bytes argument to Boolean validator
* Update Russian and Spanish translations
* New shell script tools to help determine capabilities of receivers
* Add special keys for MX Keys for Business and MX Keys Mini
* Improve tray menu ordering
* Add --tray-icon-size option to get around bugs in some tray implementations

# 1.1.0

* Fix bug when adding receiver to tray menu
* Add Catalan translation.
* Add toggle command to solaar config to toggle boolean settings
* Don't select windows with no PID when looking for focus window
* Catch errors when applying settings so that other settings are not affected
* Add support for Bolt receivers and devices, including pairing
* Revise method for creating system tray menu
* Remove obsolete code (mostly Python 2 compatibility code)
* Add support for PRO X Wireless Mouse, G914 TKL keyboard
* Ignore more notifications that come to a device listener
* Handle more device connection protocols
* Update usage and rules documentation
* Change emojis to text in documentation
* Pare down device documentation so as not to require frequent updates
* Add information about M500S mouse
* Reimplement MOUSE GESTURE and DPI SLIDING settings
* Add setting for DPI CHANGE button to switch sensitivity
* Use file name instead of icon name for tray to avoid XFCE bug
* Update documentation on implemented features and mouse gestures
* Update Polish, Japanese, and Spanish translations
* Make Quit and About strings more translatable

# 1.0.7

* Don't use time_ns so as not to require Python 3.7
* Correctly determine setting box in change_click method
* Handle fake Nano connection notifications
* Lock on actual handle, not just on handle number
* Mark Nano receiver C52F as not unpairing
* Upgrade pairing/unpairing documentation
* Don't signal status change when battery changes from None to None.
* Add Japanese translation
* Use first word of name for code name if no other code name available.
* Better determination of when to add SW ID.
* Check for more HID++ feature request failing.
* Fix bug with new_fn_inversion setting.
* Use correct device number for directly connected devices
* Add debug message when candidate device found
* Update Polish, Taiwanese, and Brazilian Portuguese translations
* Add MouseProcess a rule condition like Process but for the window under the mouse
* Add parameters for binary settings to support prefixes
* Add locks to serialize requests to devices
* Fix bug when reprog key requests returns None
* Fix bug for empty process name and class
* Rules can now trigger on both pressing and releasing a diverted key
* Upgrade mouse gestures to allow sequences of movements
* Fix gkeys diversion faked read
* Add support for Logitech g pro x superlight receiver
* Convert HID++ 2.0 device kinds to enhanced HID++ 1.0 device kinds
* Update about window, bug report templates, and supported kernels.

# 1.0.6

* Update sliding DPI to look for suitable keys
* Add mouse gestures that can trigger rules
* Complain if receivers do not support connection notification
* In polling rate setting, only modify onboard profiles when actually writing polling rate
* Add ability to ignore settings.
* Use symbols for receiver sub-registers
* Add support for wired G700
* Do not set attention icon
* Replace deprecated GTK stock menu icons
* Better handling of icons in tray and tray menus
* Receiver c52e does not unpair
* Match active WM_CLASS as well as active process name in rules
* Correctly set icon theme value when regular battery icons are not available
* Handle exception when device is not available when device is being added
* Perform initial activation of devices in listener threads
* Keep track of serial numbers in the configuration file
* Don't update settings for non-active devices
* Set the current host name if not stored on the device
* Add setting for SMART SHIFT ENHANCED feature
* Don't unnecessarily use long messages for HID++ 1.0 commands
* Correctly select choices in solaar config and use 1-origin addressing
* Add quirk for G915 TKL keyboard because its host mode interferes with its Fn keys
* Show command outputs both saved and on-device settings
* Update documentation
* Fix bug in hidconsole
* Update French translation

# 1.0.5

* Update documentation on devices forgetting settings.
* Improve help messages
* Fix bug in finding receiver to pair
* Solaar config command can set keyed settings.
* Add setting for polling rate
* Use long HID++ messages for all 2.0 requests
* Update German, Italian, and Polish translations
* Solaar config command no longer selects paired but unconnected devices
* Show HID++ 1.0 remaining pairings value in solaar show for devices that support it
* Add option to not use battery icons in system tray.
* Update Polish and Dutch translation.
* Add Czech translation.
* Remove information on SUSE package as it is very old.
* Turn GKEY notifications into Gn key keypresses that can trigger rules.
* Push device settings to devices after suspend when device is immediately active.
* Reduce unnecessary saving of configuration file.
* Better handling of disconnected devices.
* Implement GUI to edit rules.
* Implement rule-base processing of HID++ feature notifications (depends on X11).
* Add settings for diversion of crown and remappable keys.
* Access widgets by name instead of by index.
* Implement UNIFIED_BATTERY feature and use in battery reports.
* Add a clickable lock icon that determines where each setting can be changed.

# 1.0.4

* Update pt_BR translation
* Support USB and BT connected devices that are not in descriptors.py
* Use FRIENDLY NAME for codename if needed and available.
* Extract manufacturer and product ID from Udev HID information.
* Add Bluetooth and USB product IDs to device descriptors records.
* Support Bluetooth-connected devices.
* Add model ID and unit ID to device identification.
* Support changing DPI by pressing DPI Switch button and sliding horizontally
* Add device-specific notification handlers.
* Add MX Vertical USB information.
* Udev rule adds seat permissions for all Logitech devices.
* Support USB-connected devices in GUI.
* Make probe and config work for USB-connected devices.
* Improve strings and display for settings.
* Correctly handle non-unifying connection notifications.
* Update GUI strings for several settings.
* Better support for EX100 and devices that connect to it.
* Partial support for feature GESTURE_2.
* Simplify interface for settings.
* Use DJ connection notifications to set device active status
* Udev rule sets seat write permissions for hidraw nodes for device as well as receivers.
* Handle USB devices that use HID++ protocol in CLI.
* Use device hidraw nodes where possible.
* Handle receivers with serial numbers that don't provide number of pairings.
* Ignore exceptions when setting locale.
* Correctly discover settings that share a name.
* Don't show pop-up notifications at startup.
* Keep battery voltage updated in GUI.
* Add Portuguese translation.
* Update several translations.
* Add Lightspeed receivers c545 and c541.
* Reimplement REPROG_CONTROLS data structure.

# 1.0.3

* Clean up documentation files.
* Update documentation on installation.
* Update Swedish and French translations.
* Add Norwegian Nynorsk and Danish translations.
* Fix bug handling DJ pairing notifications.
* Add Norwegian Bokmål translation.
* Remove deprecated solaar-cli application.
* Don't install udev or autostart files from python (or pip).
* Solaar needs Python 3.6+ and probably needs kernel 5.2+
* Handle exceptions on dynamic settings when device is not connected.
* Fix infinite loop on some low-level write errors
* Add support for EX100 keyboard/mouse and receiver (046d:c517)
* Add two settings for THUMB_WHEEL feature - inversion and reporting via HID++
* Update German translation
* Use REPORT RATE feature when available to determine polling rate.
* Improve config command speed when not printing all settings
* Improve config command handling and checking of arguments
* Add setting for CHANGE_HOST feature
* Add argument to settings for values that are not to persist
* Add argument to settings to not wait for reply when writing a value to device
* Add argument to not wait for reply from request to device
* Add settings for MULTIPLATFORM and DUALPLATFORM features
* Remove Logitech documents from documentation directory
* Change config command to not read all settings when only printing or showing one
* Display hosts info in 'solaar show' if device supports it
* Remove non-working smooth-scroll from M510 v1
* Add yapf and flake8 code style checks
* Fix feature k375s Fn inversion
* Update controls (keys and buttons) and tasks (actions)
* Improved way to specify feature settings.
* Don't abort on device notifications with unexpected device numbers, just warn.
* Keep track of non-features so as not to ask device multiple times.
* Implement KEYBOARD DISABLE KEYS feature.
* Don't create notifications for DJ device activity reports.
* Update a few special keys and actions.
* Add keyed choice settings in configuration panel.
* Support remappable keys from reprogrammable keys v4 feature.
* Add setting class for keyed choice.
* Only check for features once per device.
* Use settings interface to show feature values in `solaar show` if no special code for feature.
* Remove maximum window size.
* Process battery voltage notifications.
* Display battery voltage information in main window if regular battery information not available.
* Show next battery level where available.
* Update list of implemented features and provide information on how to implement features.
* Add c53d as a Lightspeed receiver.

# 1.0.2

* Add usage document
* Don't produce error dialog for inaccessible receivers with access control lists.
* Add option --battery-icons=symbolic to use symbolic icons if available.
* Update French translation
* Update installation documentation
* Remove packaging directory tree as it is not maintained
* Pip installs udev rule and solaar autostart when doing install without --user flag
* Use Solaar icon instead of a missing battery icon
* Use only standard icons for battery levels.  Symbolic icons do not change to white in dark themes because of problems external to Solaar.
* Better reporting of battery levels when charging for some devices.
* Add information on K600 TV, M350 WIPD 4080, and MX Keys
* Remove assertion requiring receivers to still be in window when they are updated.
* Augment long description of Solaar showing up in repositories.
* Update installation directions.
* Install udev rule as well as autostart file when doing system install.
* Add support for Ayatana AppIndicator.
* Use setuptools icon directory on system installs when not using pip.
* Add receiver C517 and several older devices.
* Improved translations for polish.
* Bypass bug in appindicator when solaar is file in current directory.
* Don't check that device kind matches feature kind.
* Better determination of icons for battery levels.
* Use Ayatana AppIndicator if available.
* Improve error reporting when required system packages are not install.
* Better tooltip description
* Add release script to help when creating releases
* Look up tray icon filenames to get around a bug in libappindicator.
* Make the default behavior be to show the main window at startup.
* Support c537 nano receiver
* Add logind signals for suspend/resume.
* Remove solaar-gnome3 package
* Ignore features for devices that don't follow feature specification
* Add probe command to command-line interface to dump receiver registers
* Don't terminate on malformed or unknown messages
* Create fewer internal notifications for messages from devices
* Add a button to the main window to terminate (quit) Solaar
* Set up nano receivers as receivers with no unpairing and with re-pairing
* Set up c534 as receiver with max 2 pairings, no unpairing, re-pairing
* Better support receivers that do not unpair or when pairing replace existing pairings
* Add information about receiver pairing to receiver data structure
* Better support devices that only allow a limited number of total re-pairings
* Add --window option to control main window visibility and tray usage
* Ignore receiver if USB id is not retrieved
* Fix bug with double deleting when devices are disconnected
* Determine some receiver information from data structure for USB ids
* Treat battery level of 0 as unknown
* Fix bug on devices with no serial number
* Drop support for python2, and use python3 throughout
* Fix bug in remembering features discovered from device reports
* Show icons in main window device list
* Count offline devices when determining whether pairing is possible
* Update French, Dutch, German, and Croatian translations
* Better icons for battery levels
* Support DPI, Backlight 2, Battery Voltage features
* Support M585, M590, M330, MX Master 2s and 3, new M310, new K800, craft keyboard
* Documentation improvements
* Clean up directory structure and remove unused files

# 1.0.1

* Updated the repo url.
* Fixed typo which was crashing the application.
* Improved the HID write routine which was causing issues on some devices.
* Fix non-unifying receivers in Linux 5.2.
* Add new Lightspeed receiver (used in the G305)

# 1.0.0

* Too many to track...

# 0.9.3

* Merged solaar-cli functionality into main solaar.
* Scrolling over the systray icon switches between multiple peripherals.
* Swedish translation courtesy of Daniel Zippert and Emelie Snecker
* French translation courtesy of Papoteur, David Geiger and Damien Lallement.
* Fixed some untranslated strings.

# 0.9.2

* Added support for hand detection on the K800.
* Added support for V550 and V450 Nano.
* Fixed side-scrolling with the M705 Marathon.
* Fixed identification of the T650 Touchpad.
* Added internationalization support and romanian translation.
* Polish translation courtesy of Adrian Piotrowicz.

# 0.9.1

* When devices report a battery alert, only show the alert once.
* Make sure devices in the window tree are sorted by registration index.
* Added an autostart .desktop file.
* Replaced single-instance code with GtkApplication.
* Fixed identification of the M505 mouse.
* Fixed an occasional windowing layout bug with the C52F Nano Receiver.

# 0.9.0

* New single-window UI.
* Performance MX leds show the current battery charge.
* Support the VX Nano mouse.
* Faster and more accurate detection of devices.
* If upower is accessible through DBus, handle suspend/resume.
* Replaced Solaar icons with SVGs.
* Running solaar-cli in parallel with solaar is now less likely to cause issues.
* Bugfixes to saving and applying device settings.
* Properly handle ^C when running in console.

# 0.8.9

* Improved support for gnome-shell/Unity.
* Persist devices settings between runs.
* Fixed reading of MK700 keyboard battery status.
* Use battery icons from the current theme instead of custom ones.
* Debian/Ubuntu packages now depend on an icon theme, to make sure
  no missing icons appear in the application window.
* Fixed missing icons under Kubuntu.
* Many more bug-fixes and reliability improvements.

# 0.8.8

* Partial support for some Nano receivers.
* Improved support for some devices: M510, K800, Performance MX.
* Improved battery support for some HID++ 1.0 devices.
* Properly handle device loss on computer sleep/wake.
* Better handling of receiver adding and removal at runtime.
* Removed a few more unhelpful notifications.
* Incipient support for multiple connected receivers.
* More Python 3 fixes.

# 0.8.7

* Don't show the "device disconnected" notification, it can be annoying and
  not very useful.
* More robust detection of systray icon visibility.

# 0.8.6

* Ensure the Gtk application is single-instance.
* Fix identifying available dpi values.
* Fixed locating application icons when installed in a custom prefix.
* Fixed some icon names for the oxygen theme.
* Python 3 fixes.