== Drag-and-Drop MicroPython You can program your Pico by connecting it to a computer through USB, then dragging and dropping a file onto it so we've put together a downloadable UF2 file to let you install MicroPython more easily. video::images/MicroPython.webm[width="80%"] Download the correct MicroPython UF2 file for your board: * https://micropython.org/download/rp2-pico/rp2-pico-latest.uf2[Pico] * https://micropython.org/download/rp2-pico-w/rp2-pico-w-latest.uf2[Pico W] * https://micropython.org/download/RPI_PICO2/RPI_PICO2-latest.uf2[Pico 2] * https://micropython.org/download/RPI_PICO2_W/RPI_PICO2_W-latest.uf2[Pico 2 W] For more information about using Wi-Fi and Bluetooth on Raspberry Pi Pico W-series devices with C/{cpp} or MicroPython, see https://pip.raspberrypi.com/documents/RP-008257-DS[Wi-Fi and Bluetooth connectivity on Pico W-series devices]. For more information about https://github.com/bluekitchen/btstack#supported-protocols-and-profiles[supported Bluetooth protocols and profiles], see the Blue Kitchen https://github.com/bluekitchen/btstack[BTStack] Github repository. NOTE: MicroPython distributions for other RP2040- and RP2350-based boards are available on the https://micropython.org/download/[MicroPython download page]. To program your device, follow these steps: . Push and hold the BOOTSEL button while connecting your Pico with a USB cable to a computer. Release the BOOTSEL button when your Pico appears as a Mass Storage Device called RPI-RP2 (Pico) or RP2350 (Pico 2). . Drag and drop the MicroPython UF2 file onto the mounted volume. Your Pico reboots. You are now running MicroPython. . Access the REPL through USB Serial. The https://pip.raspberrypi.com/documents/RP-008355-DS[Raspberry Pi Pico-series Python SDK] book contains step-by-step instructions for connecting to your Pico and programming it in MicroPython using both the command line and the https://thonny.org/[Thonny] IDE.