/**
* SmartThings Device Handler: Yamaha Zone
*
* Author: redloro@gmail.com
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
* in compliance with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
* for the specific language governing permissions and limitations under the License.
*/
metadata {
definition (name: "Yamaha Zone", namespace: "redloro-smartthings", author: "redloro@gmail.com") {
/**
* List our capabilties. Doing so adds predefined command(s) which
* belong to the capability.
*/
capability "Music Player"
capability "Switch"
capability "Switch Level"
capability "Refresh"
capability "Polling"
capability "Sensor"
capability "Actuator"
/**
* Define all commands, ie, if you have a custom action not
* covered by a capability, you NEED to define it here or
* the call will not be made.
*
* To call a capability function, just prefix it with the name
* of the capability, for example, refresh would be "refresh.refresh"
*/
command "source0"
command "source1"
command "source2"
command "source3"
command "source4"
command "source5"
command "mutedOn"
command "mutedOff"
command "partyModeOn"
command "partyModeOff"
command "zone"
}
/**
* Define the various tiles and the states that they can be in.
* The 2nd parameter defines an event which the tile listens to,
* if received, it tries to map it to a state.
*
* You can also use ${currentValue} for the value of the event
* or ${name} for the name of the event. Just make SURE to use
* single quotes, otherwise it will only be interpreted at time of
* launch, instead of every time the event triggers.
*/
tiles(scale: 2) {
multiAttributeTile(name:"state", type:"lighting", width:6, height:4) {
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
attributeState "on", label:'On', action:"switch.off", icon:"st.Electronics.electronics16", backgroundColor:"#79b821", nextState:"off"
attributeState "off", label:'Off', action:"switch.on", icon:"st.Electronics.electronics16", backgroundColor:"#ffffff", nextState:"on"
}
tileAttribute ("source", key: "SECONDARY_CONTROL") {
attributeState "source", label:'${currentValue}'
}
}
// row
//controlTile("volume", "device.volume", "slider", height: 1, width: 6, range:"(0..100)") {
controlTile("volume", "device.volume", "slider", height: 1, width: 6, range:"(-80..16)") {
state "volume", label: "Volume", action:"music Player.setLevel", backgroundColor:"#00a0dc"
}
// row
standardTile("0", "device.source0", decoration: "flat", width: 2, height: 2) {
state("off", label:"AV1", action:"source0", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
state("on", label:"AV1", action:"source0", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
}
standardTile("1", "device.source1", decoration: "flat", width: 2, height: 2) {
state("off", label:"AV2", action:"source1", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
state("on", label:"AV2", action:"source1", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
}
standardTile("2", "device.source2", decoration: "flat", width: 2, height: 2) {
state("off", label:"AV3", action:"source2", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
state("on", label:"AV3", action:"source2", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
}
standardTile("3", "device.source3", decoration: "flat", width: 2, height: 2) {
state("off", label:"AV4", action:"source3", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
state("on", label:"AV4", action:"source3", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
}
standardTile("4", "device.source4", decoration: "flat", width: 2, height: 2) {
state("off", label:"AV5", action:"source4", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
state("on", label:"AV5", action:"source4", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
}
standardTile("5", "device.source5", decoration: "flat", width: 2, height: 2) {
state("off", label:"AV6", action:"source5", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
state("on", label:"AV6", action:"source5", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
}
// row
standardTile("muted", "device.muted", decoration: "flat", width: 2, height: 2) {
state("off", label:'Muted', action:"mutedOn", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff", nextState:"on")
state("on", label:'Muted', action:"mutedOff", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-mute.png", backgroundColor:"#ffffff", nextState:"off")
}
standardTile("partyMode", "device.partyMode", decoration: "flat", width: 2, height: 2, inactiveLabel: false) {
state("off", label:'Party Mode', action:"partyModeOn", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff", nextState:"on")
state("on", label:'Party Mode', action:"partyModeOff", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-party.png", backgroundColor:"#ffffff", nextState:"off")
}
standardTile("refresh", "device.status", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
state "default", label:"Refresh", action:"refresh.refresh", icon:"st.secondary.refresh-icon", backgroundColor:"#ffffff"
}
// Defines which tile to show in the overview
main "state"
// Defines which tile(s) to show when user opens the detailed view
details([
"state",
"volume",
"0","1","2","3","4","5",
"muted", "partyMode","refresh"
])
}
preferences {
input name: "source0", type: "text", title: "Source 1", defaultValue: "AV1"
input name: "source1", type: "text", title: "Source 2", defaultValue: "AV2"
input name: "source2", type: "text", title: "Source 3", defaultValue: "AV3"
input name: "source3", type: "text", title: "Source 4", defaultValue: "AV4"
input name: "source4", type: "text", title: "Source 5", defaultValue: "AV5"
input name: "source5", type: "text", title: "Source 6", defaultValue: "AV6"
}
}
/**************************************************************************
* The following section simply maps the actions as defined in
* the metadata into onAction() calls.
*
* This is preferred since some actions can be dealt with more
* efficiently this way. Also keeps all user interaction code in
* one place.
*
*/
def on() {
sendCommand("<${getZone()}>On${getZone()}>")
sendEvent(name: "switch", value: "on")
}
def off() {
sendCommand("<${getZone()}>Standby${getZone()}>")
sendEvent(name: "switch", value: "off")
}
def setLevel(value) {
//sendCommand("<${getZone()}>${(Math.round(value * 9 / 5) * 5 - 800).intValue()}1dB${getZone()}>")
sendCommand("<${getZone()}>${(value * 10).intValue()}1dB${getZone()}>")
sendEvent(name: "volume", value: value)
}
def source0() {
setSource(0)
}
def source1() {
setSource(1)
}
def source2() {
setSource(2)
}
def source3() {
setSource(3)
}
def source4() {
setSource(4)
}
def source5() {
setSource(5)
}
def mutedOn() {
sendCommand("<${getZone()}>On${getZone()}>")
sendEvent(name: "muted", value: "on")
}
def mutedOff() {
sendCommand("<${getZone()}>Off${getZone()}>")
sendEvent(name: "muted", value: "off")
}
def partyModeOn() {
sendCommand("On")
sendEvent(name: "partyMode", value: "on")
}
def partyModeOff() {
sendCommand("Off")
sendEvent(name: "partyMode", value: "off")
}
def refresh() {
sendCommand("<${getZone()}>GetParam${getZone()}>")
sendCommand("GetParam")
}
/**************************************************************************/
/**
* Called every so often (every 5 minutes actually) to refresh the
* tiles so the user gets the correct information.
*/
def poll() {
refresh()
}
def parse(String description) {
return
}
def setSource(id) {
//log.debug "source: "+getSourceName(id)
sendCommand("<${getZone()}>"+getSourceName(id)+"${getZone()}>")
setSourceTile(getSourceName(id))
}
def getSourceName(id) {
if (settings) {
return settings."source${id}"
} else {
return ['AV1', 'AV2', 'AV3', 'AV4', 'AV5', 'AV6'].get(id)
}
}
def setSourceTile(name) {
sendEvent(name: "source", value: "Source: ${name}")
for (def i = 0; i < 6; i++) {
if (name == getSourceName(i)) {
sendEvent(name: "source${i}", value: "on")
}
else {
sendEvent(name: "source${i}", value: "off")
}
}
}
def zone(evt) {
/*
* Zone On/Off
*/
if (evt.Basic_Status.Power_Control.Power.text()) {
sendEvent(name: "switch", value: (evt.Basic_Status.Power_Control.Power.text() == "On") ? "on" : "off")
}
/*
* Zone Volume
*/
if (evt.Basic_Status.Volume.Lvl.Val.text()) {
def int volLevel = evt.Basic_Status.Volume.Lvl.Val.toInteger() ?: -250
//sendEvent(name: "volume", value: ((volLevel + 800) / 9).intValue())
sendEvent(name: "volume", value: (volLevel / 10).intValue())
}
/*
* Zone Muted
*/
if (evt.Basic_Status.Volume.Mute.text()) {
sendEvent(name: "muted", value: (evt.Basic_Status.Volume.Mute.text() == "On") ? "on" : "off")
}
/*
* Zone Source
*/
if (evt.Basic_Status.Input.Input_Sel.text()) {
setSourceTile(evt.Basic_Status.Input.Input_Sel.text())
}
/*
* Party Mode
*/
if (evt.Party_Mode.Mode.text()) {
sendEvent(name: "partyMode", value: (evt.Party_Mode.Mode.text() == "On") ? "on" : "off")
}
}
private sendCommand(body) {
parent.sendCommand(body)
}
private getZone() {
return new String(device.deviceNetworkId).tokenize('|')[2]
}