{
  "build": {
    "arduino": {
      "ldscript": "esp32c3_out.ld"
    },
    "core": "esp32",
    "f_cpu": "160000000L",
    "f_flash": "80000000L",
    "flash_mode": "qio",
    "extra_flags": [
      "'-D ARDUINO_ESP32C3_DEV'",
      "'-D ARDUINO_USB_MODE=1'",
      "'-D ARDUINO_USB_CDC_ON_BOOT=1'",
      "'-D ESP32_2424S012C'",
      "'-D DISPLAY_WIDTH=240'",
      "'-D DISPLAY_HEIGHT=240'",
      "'-D LVGL_BUFFER_PIXELS=(DISPLAY_WIDTH*DISPLAY_HEIGHT/4)'",
      "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
      "'-D DISPLAY_BCKL=3'",
      "'-D DISPLAY_IPS'",
      "'-D DISPLAY_GC9A01_SPI'",
      "'-D GC9A01_SPI_HOST=SPI2_HOST'",
      "'-D GC9A01_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",
      "'-D SMARTDISPLAY_DMA_BUFFER_SIZE=65536'",
      "'-D SMARTDISPLAY_DMA_QUEUE_SIZE=12'",
      "'-D SMARTDISPLAY_DMA_CHUNK_THRESHOLD=2048'",
      "'-D SMARTDISPLAY_DMA_TIMEOUT_MS=1500'",
      "'-D GC9A01_SPI_BUS_MOSI=7'",
      "'-D GC9A01_SPI_BUS_MISO=GPIO_NUM_NC'",
      "'-D GC9A01_SPI_BUS_SCLK=6'",
      "'-D GC9A01_SPI_BUS_QUADWP=GPIO_NUM_NC'",
      "'-D GC9A01_SPI_BUS_QUADHD=GPIO_NUM_NC'",
      "'-D GC9A01_SPI_BUS_MAX_TRANSFER_SZ=(LVGL_BUFFER_PIXELS*sizeof(lv_color16_t))'",
      "'-D GC9A01_SPI_BUS_FLAGS=0'",
      "'-D GC9A01_SPI_BUS_INTR_FLAGS=0'",
      "'-D GC9A01_SPI_CONFIG_CS=10'",
      "'-D GC9A01_SPI_CONFIG_DC=2'",
      "'-D GC9A01_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
      "'-D GC9A01_SPI_CONFIG_PCLK_HZ=80000000'",
      "'-D GC9A01_SPI_CONFIG_TRANS_QUEUE_DEPTH=10'",
      "'-D GC9A01_SPI_CONFIG_LCD_CMD_BITS=8'",
      "'-D GC9A01_SPI_CONFIG_LCD_PARAM_BITS=8'",
      "'-D GC9A01_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
      "'-D GC9A01_SPI_CONFIG_FLAGS_OCTAL_MODE=false'",
      "'-D GC9A01_SPI_CONFIG_FLAGS_LSB_FIRST=false'",
      "'-D GC9A01_DEV_CONFIG_RESET=GPIO_NUM_NC'",
      "'-D GC9A01_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'",
      "'-D GC9A01_DEV_CONFIG_BITS_PER_PIXEL=16'",
      "'-D GC9A01_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
      "'-D GC9A01_DEV_CONFIG_VENDOR_CONFIG=NULL'",
      "'-D DISPLAY_SWAP_XY=false'",
      "'-D DISPLAY_MIRROR_X=true'",
      "'-D DISPLAY_MIRROR_Y=false'",
      "'-D BOARD_HAS_TOUCH'",
      "'-D CONFIG_ESP_LCD_TOUCH_MAX_POINTS=1'",
      "'-D CONFIG_ESP_LCD_TOUCH_MAX_BUTTONS=0'",
      "'-D TOUCH_CST816S_I2C'",
      "'-D CST816S_IO_I2C_CONFIG_DEV_ADDRESS=CST816S_IO_I2C_CONFIG_DEV_ADDRESS_15'",
      "'-D CST816S_I2C_HOST=I2C_NUM_0'",
      "'-D CST816S_I2C_CONFIG_SDA=4'",
      "'-D CST816S_I2C_CONFIG_SCL=5'",
      "'-D CST816S_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_ENABLE'",
      "'-D CST816S_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_ENABLE'",
      "'-D CST816S_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
      "'-D CST816S_I2C_CONFIG_CLK_FLAGS=0'",
      "'-D CST816S_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS'",
      "'-D CST816S_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
      "'-D CST816S_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
      "'-D CST816S_IO_I2C_CONFIG_LCD_CMD_BITS=8'",
      "'-D CST816S_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
      "'-D CST816S_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
      "'-D CST816S_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
      "'-D CST816S_TOUCH_CONFIG_X_MAX=DISPLAY_WIDTH'",
      "'-D CST816S_TOUCH_CONFIG_Y_MAX=DISPLAY_HEIGHT'",
      "'-D CST816S_TOUCH_CONFIG_RST=1'",
      "'-D CST816S_TOUCH_CONFIG_INT=0'",
      "'-D CST816S_TOUCH_CONFIG_LEVELS_RESET=0'",
      "'-D CST816S_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
      "'-D TOUCH_SWAP_XY=false'",
      "'-D TOUCH_MIRROR_X=false'",
      "'-D TOUCH_MIRROR_Y=false'"
    ],
    "mcu": "esp32c3",
    "variant": "esp32c3"
  },
  "connectivity": [
    "wifi",
    "bluetooth"
  ],
  "debug": {
    "openocd_target": "esp32c3.cfg"
  },
  "frameworks": [
    "arduino",
    "espidf"
  ],
  "name": "esp32-2424S012C",
  "upload": {
    "flash_size": "4MB",
    "maximum_ram_size": 327680,
    "maximum_size": 4194304,
    "require_upload_port": true,
    "speed": 460800
  },
  "url": "https://www.aliexpress.com/item/1005005453515690.html",
  "vendor": "Sunton"
}