{
  "build": {
    "arduino": {
      "ldscript": "esp32_out.ld"
    },
    "core": "esp32",
    "extra_flags": [
      "'-D ARDUINO_ESP32_DEV'",
      "'-D ESP32_2432S022N'",
      "'-D DISPLAY_WIDTH=240'",
      "'-D DISPLAY_HEIGHT=320'",
      "'-D LVGL_BUFFER_PIXELS=(DISPLAY_WIDTH*DISPLAY_HEIGHT/8)'",
      "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
      "'-D DISPLAY_BCKL=0'",
      "'-D DISPLAY_ST7789_I80'",
      "'-D SMARTDISPLAY_DMA_BUFFER_SIZE=49152'",
      "'-D SMARTDISPLAY_DMA_QUEUE_SIZE=8'",
      "'-D SMARTDISPLAY_DMA_CHUNK_THRESHOLD=4096'",
      "'-D SMARTDISPLAY_DMA_TIMEOUT_MS=1000'",
      "'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
      "'-D ST7789_I80_BUS_CONFIG_DC=16'",
      "'-D ST7789_I80_BUS_CONFIG_WR=4'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D8=15'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D9=13'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D10=12'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D11=14'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D12=27'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D13=25'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D14=33'",
      "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D15=32'",
      "'-D ST7789_I80_BUS_CONFIG_BUS_WIDTH=8'",
      "'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LVGL_BUFFER_PIXELS * sizeof(lv_color_t))'",
      "'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
      "'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
      "'-D ST7789_IO_I80_CONFIG_CS=17'",
      "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=12000000'",
      "'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
      "'-D ST7789_IO_I80_CONFIG_LCD_CMD_BITS=8'",
      "'-D ST7789_IO_I80_CONFIG_LCD_PARAM_BITS=8'",
      "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_IDLE_LEVEL=0'",
      "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_CMD_LEVEL=0'",
      "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DUMMY_LEVEL=0'",
      "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DATA_LEVEL=1'",
      "'-D ST7789_IO_I80_CONFIG_FLAGS_CS_ACTIVE_HIGH=0'",
      "'-D ST7789_IO_I80_CONFIG_FLAGS_REVERSE_COLOR_BITS=0'",
      "'-D ST7789_IO_I80_CONFIG_FLAGS_SWAP_COLOR_BYTES=0'",
      "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_ACTIVE_NEG=0'",
      "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_IDLE_LOW=0'",
      "'-D ST7789_DEV_CONFIG_RESET=GPIO_NUM_NC'",
      "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
      "'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
      "'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
      "'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
      "'-D ST7789_RD=2'",
      "'-D DISPLAY_SWAP_XY=false'",
      "'-D DISPLAY_MIRROR_X=false'",
      "'-D DISPLAY_MIRROR_Y=false'",
      "'-D BOARD_HAS_TF'",
      "'-D TF_CS=5'",
      "'-D TF_SPI_MOSI=23'",
      "'-D TF_SPI_SCLK=18'",
      "'-D TF_SPI_MISO=19'",
      "'-D BOARD_HAS_SPEAK'",
      "'-D SPEAK=26'"
    ],
    "f_cpu": "240000000L",
    "f_flash": "40000000L",
    "flash_mode": "dio",
    "mcu": "esp32",
    "variant": "esp32"
  },
  "connectivity": [
    "wifi",
    "bluetooth",
    "ethernet",
    "can"
  ],
  "debug": {
    "openocd_board": "esp-wroom-32.cfg"
  },
  "frameworks": [
    "arduino",
    "espidf"
  ],
  "name": "esp32-2432S022N",
  "upload": {
    "flash_size": "4MB",
    "maximum_ram_size": 327680,
    "maximum_size": 4194304,
    "require_upload_port": true,
    "speed": 460800
  },
  "url": "https://www.aliexpress.com/item/1005006284154750.html",
  "vendor": "Sunton"
}