Dell iDRAC Fan Controller tigerblue77/dell_idrac_fan_controller https://hub.docker.com/r/tigerblue77/dell_idrac_fan_controller/ bridge false https://github.com/tigerblue77/Dell_iDRAC_fan_controller_Docker https://github.com/tigerblue77/Dell_iDRAC_fan_controller_Docker https://hub.docker.com/r/tigerblue77/dell_idrac_fan_controller/ All parameters are optional as they have default values (including default iDRAC username and password). IDRAC_HOST parameter can be set to "local" or to your distant iDRAC's IP address. Default value is "local". IDRAC_USERNAME parameter is only necessary if you're adressing a distant iDRAC. Default value is "root". IDRAC_PASSWORD parameter is only necessary if you're adressing a distant iDRAC. Default value is "calvin". FAN_SPEED parameter can be set as a decimal (from 0 to 100%) or hexadecimal value (from 0x00 to 0x64) you want to set the fans to. Default value is 5(%). CPU_TEMPERATURE_THRESHOLD parameter is the T°junction (junction temperature) threshold beyond which the Dell fan profile defined in your BIOS will become active again (to protect the server hardware against overheat). Default value is 50(°C). CHECK_INTERVAL parameter is the time (in seconds) between each temperature check and potential profile change. Default value is 60(s). DISABLE_THIRD_PARTY_PCIE_CARD_DELL_DEFAULT_COOLING_RESPONSE parameter is a boolean that allows to disable third-party PCIe card Dell default cooling response. Default value is false. ipmi tool installation help: https://forums.unraid.net/topic/129200-plug-in-nerdtools/ for installation and check this link for missing ipmi ipmi tool can't find /dev/ipmi0?: https://serverfault.com/questions/480371/ipmitool-cant-find-dev-ipmi0-or-dev-ipmidev-0 local 5 50 60 root calvin false /dev/ipmi0