(tundra) A20-olinuxino-lime2 $ kerm Connecting to /dev/tty.SLAB_USBtoUART, speed 115200 Escape character: Ctrl-^ (ASCII 30, RS): enabled Type the escape character followed by C to get back, or followed by ? to see other options. ---------------------------------------------------- U-Boot SPL 2021.04+olimex-1-20241121.171845 (Nov 21 2024 - 17:19:49 +0000) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Loading configuration from EEPROM: OK Verifying data: OK Trying to boot from MMC1 U-Boot 2021.04+olimex-1-20241121.171845 (Nov 21 2024 - 17:19:49 +0000) Allwinner Technology CPU: Allwinner A20 (SUN7I) ID: A20-OLinuXino-LIME2-e16Gs16M Rev.L1 SN: 00034AA4 MAC: 30:1F:9A:D1:BB:E0 I2C: ready DRAM: 1 GiB SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loading Environment from EXT4... *** Warning - bad CRC, using default environment Loading Environment from FAT... ** No device specified ** In: serial Out: serial Err: serial Allwinner mUSB OTG (Peripheral) Net: eth0: ethernet@1c50000, eth1: usb_ether starting USB... Bus usb@1c14000: USB EHCI 1.00 Bus usb@1c14400: USB OHCI 1.0 Bus usb@1c1c000: USB EHCI 1.00 Bus usb@1c1c400: USB OHCI 1.0 scanning bus usb@1c14000 for devices... 1 USB Device(s) found scanning bus usb@1c14400 for devices... 1 USB Device(s) found scanning bus usb@1c1c000 for devices... 1 USB Device(s) found scanning bus usb@1c1c400 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2274 bytes read in 2 ms (1.1 MiB/s) ## Executing script at 43100000 Boot script loaded from mmc Checking for /uEnv.txt... Checking for /boot/uEnv.txt... 1156 bytes read in 2 ms (564.5 KiB/s) Loaded environment from /boot/uEnv.txt Loading FIT image... 16235615 bytes read in 887 ms (17.5 MiB/s) ## Loading kernel from FIT Image at 58000000 ... Using 'config-9604' configuration Trying 'kernel-1' kernel subimage Description: Linux kernel 5.10.180-olimex Type: Kernel Image Compression: uncompressed Data Start: 0x580000d4 Data Size: 6571744 Bytes = 6.3 MiB Architecture: ARM OS: Linux Load Address: 0x40080000 Entry Point: 0x40080000 Hash algo: crc32 Hash value: e2d108f2 Hash algo: sha1 Hash value: 4177e25007815188e46ac3d2bde2d80ffdde43c7 Verifying Hash Integrity ... crc32+ sha1+ OK ## Loading ramdisk from FIT Image at 58000000 ... Using 'config-9604' configuration Trying 'ramdisk-1' ramdisk subimage Description: Ramdisk for kernel 5.10.180-olimex Type: RAMDisk Image Compression: Unknown Compression Data Start: 0x586448e8 Data Size: 9207651 Bytes = 8.8 MiB Architecture: ARM OS: Linux Load Address: 0x4fe00000 Entry Point: 0x4fe00000 Hash algo: crc32 Hash value: 1064823b Hash algo: sha1 Hash value: 523a2186663c91fff7485684850451f13e4a74a4 Verifying Hash Integrity ... crc32+ sha1+ OK Loading ramdisk from 0x586448e8 to 0x4fe00000 WARNING: 'compression' nodes for ramdisks are deprecated, please fix your .its file! ## Loading fdt from FIT Image at 58000000 ... Using 'config-9604' configuration Trying 'fdt-4' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x58f2c604 Data Size: 43643 Bytes = 42.6 KiB Architecture: ARM Load Address: 0x4fa00000 Hash algo: crc32 Hash value: 36a64574 Hash algo: sha1 Hash value: 16c904b58520be6ecf47b5482c59376f4aba068f Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from 0x58f2c604 to 0x4fa00000 ## Loading fdt from FIT Image at 58000000 ... Trying 'overlay-1' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x58f78050 Data Size: 1001 Bytes = 1001 Bytes Architecture: ARM Load Address: 0x4fa10000 Hash algo: crc32 Hash value: d1d51f29 Hash algo: sha1 Hash value: fa0c14efb55dbe4bdf8aa7241a3e600b486e3ef6 Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from 0x58f78050 to 0x4fa10000 ## Loading fdt from FIT Image at 58000000 ... Trying 'overlay-2' fdt subimage Description: unavailable Type: Flat Device Tree Compression: uncompressed Data Start: 0x58f7851c Data Size: 436 Bytes = 436 Bytes Architecture: ARM Load Address: 0x4fa20000 Hash algo: crc32 Hash value: 00f3a93c Hash algo: sha1 Hash value: efa518e1ffcc7c09a7d8010de6a7b363f1345b30 Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from 0x58f7851c to 0x4fa20000 Booting using the fdt blob at 0x4fa00000 EHCI failed to shut down host controller. Loading Kernel Image Loading Ramdisk to 49738000, end 49ffff63 ... OK Loading Device Tree to 4972a000, end 49737c59 ... OK Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/spi1-spidev.dtbo'... 408 bytes read in 6 ms (66.4 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/spi2-spidev.dtbo'... 408 bytes read in 7 ms (56.6 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-i2c2.dtbo'... 726 bytes read in 7 ms (100.6 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-spi1.dtbo'... 1005 bytes read in 6 ms (163.1 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-spi2.dtbo'... 1005 bytes read in 7 ms (139.6 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-uart3.dtbo'... 863 bytes read in 6 ms (139.6 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-uart4.dtbo'... 867 bytes read in 6 ms (140.6 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-uart5.dtbo'... 867 bytes read in 6 ms (140.6 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-uart6.dtbo'... 867 bytes read in 7 ms (120.1 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-uart7.dtbo'... 867 bytes read in 6 ms (140.6 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-spi0.dtbo'... 1001 bytes read in 6 ms (162.1 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/sun7i-a20-can.dtbo'... 732 bytes read in 6 ms (119.1 KiB/s) Applying overlay: '/usr/lib/olinuxino-overlays/sun7i-a20/lime2-lcd-olinuxino.dtbo'... 2256 bytes read in 5 ms (440.4 KiB/s) Starting kernel ... [ 0.005811] /cpus/cpu@0 missing clock-frequency property [ 0.005859] /cpus/cpu@1 missing clock-frequency property [ 1.030021] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO Loading, please wait... Starting version 247.3-7+deb11u6 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.36.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 /dev/mmcblk0p1: clean, 136698/7806976 files, 1171485/31214592 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. Welcome to Debian GNU/Linux 11 (bullseye)! [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-modprobe.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Slices. [ OK ] Reached target Swap. [ OK ] Listening on Syslog Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. Mounting POSIX Message Queue File System... Mounting Kernel Debug File System... Mounting Kernel Trace File System... Starting Restore / save the current clock... Starting Set the console keyboard layout... Starting Create list of st…odes for the current kernel... Starting Load Kernel Module configfs... Starting Load Kernel Module drm... Starting Load Kernel Module fuse... [ OK ] Started Nameserver information manager. [ OK ] Reached target Network (Pre). Starting Journal Service... Starting Load Kernel Modules... Starting Remount Root and Kernel File Systems... Starting Coldplug All udev Devices... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Kernel Trace File System. [ OK ] Finished Restore / save the current clock. [ OK ] Finished Create list of st… nodes for the current kernel. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Load Kernel Modules. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Load/Save Random Seed... Starting Apply Kernel Variables... Starting Create System Users... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Set the console keyboard layout. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Tell Plymouth To Write Out Runtime Data... Starting Rule-based Manage…for Device Events and Files... [ OK ] Started Journal Service. [ OK ] Finished Set console font and keymap. [ OK ] Finished Tell Plymouth To Write Out Runtime Data. Starting Flush Journal to Persistent Storage... [ OK ] Finished Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Found device /dev/ttyGS0. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... Starting Show Plymouth Boot Screen... [ OK ] Finished Helper to synchronize boot up for ifupdown. [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Raise network interfaces... Starting Load/Save Screen …ness of backlight:backlight... [ OK ] Started Show Plymouth Boot Screen. [ OK ] Started Forward Password R…s to Plymouth Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Finished Load/Save Screen …htness of backlight:backlight. [ OK ] Reached target System Initialization. [ OK ] Started CUPS Scheduler. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily man-db regeneration. [ OK ] Started Run system activit…ounting tool every 10 minutes. [ OK ] Started Generate summary o…esterday's process accounting. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Paths. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on CUPS Scheduler. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... Starting Bluetooth management mechanism... [ 12.115183] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present! [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... [ 12.566323] lcd_olinuxino 2-0050: error reading from device at 00 Starting Remove Stale Onli…t4 Metadata Check Snapshots... Starting Initialize hardware monitoring sensors... Starting LSB: Load kernel …d to enable cpufreq scaling... [ OK ] Started Realtek H5 bluetooth support. Starting LCD-OLinuXino RTP calibrabion... Starting Authorization Manager... Starting System Logging Service... Starting Resets System Activity Logs... Starting User Login Management... Starting Disk Manager... Starting WPA supplicant... [ OK ] Started System Logging Service. [ OK ] Finished Resets System Activity Logs. [ OK ] Finished Initialize hardware monitoring sensors. [ OK ] Finished Raise network interfaces. [ OK ] Finished LCD-OLinuXino RTP calibrabion. [ OK ] Started WPA supplicant. [ OK ] Found device /dev/ttyS0. [ OK ] Started Authorization Manager. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Network Manager. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots. [ OK ] Started User Login Management. [ OK ] Started Disk Manager. [ OK ] Started Bluetooth management mechanism. Starting Modem Manager... Starting Network Manager Wait Online... Starting Save/Restore Sound Card State... Starting LSB: set CPUFreq kernel parameters... [ OK ] Started ifup for eth0. [ OK ] Reached target Network. Starting CUPS Scheduler... Starting Network Time Service... Starting OpenVPN service... Starting OpenBSD Secure Shell server... Starting Hostname Service... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Finished Save/Restore Sound Card State. [ OK ] Finished OpenVPN service. [ OK ] Started Network Time Service. [ OK ] Finished Permit User Sessions. [ OK ] Started CUPS Scheduler. [ OK ] Reached target Sound Card. [ OK ] Started Make remote CUPS printers available locally. Starting Light Display Manager... Starting Hold until boot process finishes up... [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Modem Manager. Starting LSB: Set sysfs variables from /etc/sysfs.conf... [ OK ] Finished Hold until boot process finishes up. Debian GNU/Linux 11 a20-olinuxino ttyS0 a20-olinuxino login: