--- # Source: calico/templates/calico-config.yaml # This ConfigMap is used to configure a self-hosted Calico installation. kind: ConfigMap apiVersion: v1 metadata: name: calico-config namespace: kube-system data: # Typha is disabled. typha_service_name: "none" # Configure the backend to use. calico_backend: "bird" # Configure the MTU to use for workload interfaces and tunnels. # By default, MTU is auto-detected, and explicitly setting this field should not be required. # You can override auto-detection by providing a non-zero value. veth_mtu: "0" # The CNI network configuration to install on each node. The special # values in this config will be automatically populated. cni_network_config: |- { "name": "k8s-pod-network", "cniVersion": "0.3.1", "plugins": [ { "type": "calico", "log_level": "info", "log_file_path": "/var/log/calico/cni/cni.log", "datastore_type": "kubernetes", "nodename": "__KUBERNETES_NODE_NAME__", "mtu": __CNI_MTU__, "ipam": { "type": "calico-ipam", "assign_ipv4": "false", "assign_ipv6": "true" }, "policy": { "type": "k8s" }, "kubernetes": { "kubeconfig": "__KUBECONFIG_FILEPATH__" } }, { "type": "portmap", "snat": true, "capabilities": {"portMappings": true} }, { "type": "bandwidth", "capabilities": {"bandwidth": true} } ] } --- # Source: calico/templates/kdd-crds.yaml apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: bgpconfigurations.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: BGPConfiguration listKind: BGPConfigurationList plural: bgpconfigurations singular: bgpconfiguration scope: Cluster versions: - name: v1 schema: openAPIV3Schema: description: BGPConfiguration contains the configuration for any BGP routing. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: BGPConfigurationSpec contains the values of the BGP configuration. properties: asNumber: description: 'ASNumber is the default AS number used by a node. [Default: 64512]' format: int32 type: integer communities: description: Communities is a list of BGP community values and their arbitrary names for tagging routes. items: description: Community contains standard or large community value and its name. properties: name: description: Name given to community value. type: string value: description: Value must be of format `aa:nn` or `aa:nn:mm`. For standard community use `aa:nn` format, where `aa` and `nn` are 16 bit number. For large community use `aa:nn:mm` format, where `aa`, `nn` and `mm` are 32 bit number. Where, `aa` is an AS Number, `nn` and `mm` are per-AS identifier. pattern: ^(\d+):(\d+)$|^(\d+):(\d+):(\d+)$ type: string type: object type: array listenPort: description: ListenPort is the port where BGP protocol should listen. Defaults to 179 maximum: 65535 minimum: 1 type: integer logSeverityScreen: description: 'LogSeverityScreen is the log severity above which logs are sent to the stdout. [Default: INFO]' type: string nodeToNodeMeshEnabled: description: 'NodeToNodeMeshEnabled sets whether full node to node BGP mesh is enabled. [Default: true]' type: boolean prefixAdvertisements: description: PrefixAdvertisements contains per-prefix advertisement configuration. items: description: PrefixAdvertisement configures advertisement properties for the specified CIDR. properties: cidr: description: CIDR for which properties should be advertised. type: string communities: description: Communities can be list of either community names already defined in `Specs.Communities` or community value of format `aa:nn` or `aa:nn:mm`. For standard community use `aa:nn` format, where `aa` and `nn` are 16 bit number. For large community use `aa:nn:mm` format, where `aa`, `nn` and `mm` are 32 bit number. Where,`aa` is an AS Number, `nn` and `mm` are per-AS identifier. items: type: string type: array type: object type: array serviceClusterIPs: description: ServiceClusterIPs are the CIDR blocks from which service cluster IPs are allocated. If specified, Calico will advertise these blocks, as well as any cluster IPs within them. items: description: ServiceClusterIPBlock represents a single allowed ClusterIP CIDR block. properties: cidr: type: string type: object type: array serviceExternalIPs: description: ServiceExternalIPs are the CIDR blocks for Kubernetes Service External IPs. Kubernetes Service ExternalIPs will only be advertised if they are within one of these blocks. items: description: ServiceExternalIPBlock represents a single allowed External IP CIDR block. properties: cidr: type: string type: object type: array type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: bgppeers.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: BGPPeer listKind: BGPPeerList plural: bgppeers singular: bgppeer scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: BGPPeerSpec contains the specification for a BGPPeer resource. properties: asNumber: description: The AS Number of the peer. format: int32 type: integer keepOriginalNextHop: description: Option to keep the original nexthop field when routes are sent to a BGP Peer. Setting "true" configures the selected BGP Peers node to use the "next hop keep;" instead of "next hop self;"(default) in the specific branch of the Node on "bird.cfg". type: boolean node: description: The node name identifying the Calico node instance that is targeted by this peer. If this is not set, and no nodeSelector is specified, then this BGP peer selects all nodes in the cluster. type: string nodeSelector: description: Selector for the nodes that should have this peering. When this is set, the Node field must be empty. type: string password: description: Optional BGP password for the peerings generated by this BGPPeer resource. properties: secretKeyRef: description: Selects a key of a secret in the node pod's namespace. properties: key: description: The key of the secret to select from. Must be a valid secret key. type: string name: description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?' type: string optional: description: Specify whether the Secret or its key must be defined type: boolean required: - key type: object type: object peerIP: description: The IP address of the peer followed by an optional port number to peer with. If port number is given, format should be `[]:port` or `:` for IPv4. If optional port number is not set, and this peer IP and ASNumber belongs to a calico/node with ListenPort set in BGPConfiguration, then we use that port to peer. type: string peerSelector: description: Selector for the remote nodes to peer with. When this is set, the PeerIP and ASNumber fields must be empty. For each peering between the local node and selected remote nodes, we configure an IPv4 peering if both ends have NodeBGPSpec.IPv4Address specified, and an IPv6 peering if both ends have NodeBGPSpec.IPv6Address specified. The remote AS number comes from the remote node's NodeBGPSpec.ASNumber, or the global default if that is not set. type: string type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: blockaffinities.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: BlockAffinity listKind: BlockAffinityList plural: blockaffinities singular: blockaffinity scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: BlockAffinitySpec contains the specification for a BlockAffinity resource. properties: cidr: type: string deleted: description: Deleted indicates that this block affinity is being deleted. This field is a string for compatibility with older releases that mistakenly treat this field as a string. type: string node: type: string state: type: string required: - cidr - deleted - node - state type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: clusterinformations.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: ClusterInformation listKind: ClusterInformationList plural: clusterinformations singular: clusterinformation scope: Cluster versions: - name: v1 schema: openAPIV3Schema: description: ClusterInformation contains the cluster specific information. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: ClusterInformationSpec contains the values of describing the cluster. properties: calicoVersion: description: CalicoVersion is the version of Calico that the cluster is running type: string clusterGUID: description: ClusterGUID is the GUID of the cluster type: string clusterType: description: ClusterType describes the type of the cluster type: string datastoreReady: description: DatastoreReady is used during significant datastore migrations to signal to components such as Felix that it should wait before accessing the datastore. type: boolean variant: description: Variant declares which variant of Calico should be active. type: string type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: felixconfigurations.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: FelixConfiguration listKind: FelixConfigurationList plural: felixconfigurations singular: felixconfiguration scope: Cluster versions: - name: v1 schema: openAPIV3Schema: description: Felix Configuration contains the configuration for Felix. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: FelixConfigurationSpec contains the values of the Felix configuration. properties: allowIPIPPacketsFromWorkloads: description: 'AllowIPIPPacketsFromWorkloads controls whether Felix will add a rule to drop IPIP encapsulated traffic from workloads [Default: false]' type: boolean allowVXLANPacketsFromWorkloads: description: 'AllowVXLANPacketsFromWorkloads controls whether Felix will add a rule to drop VXLAN encapsulated traffic from workloads [Default: false]' type: boolean awsSrcDstCheck: description: 'Set source-destination-check on AWS EC2 instances. Accepted value must be one of "DoNothing", "Enabled" or "Disabled". [Default: DoNothing]' enum: - DoNothing - Enable - Disable type: string bpfConnectTimeLoadBalancingEnabled: description: 'BPFConnectTimeLoadBalancingEnabled when in BPF mode, controls whether Felix installs the connection-time load balancer. The connect-time load balancer is required for the host to be able to reach Kubernetes services and it improves the performance of pod-to-service connections. The only reason to disable it is for debugging purposes. [Default: true]' type: boolean bpfDataIfacePattern: description: BPFDataIfacePattern is a regular expression that controls which interfaces Felix should attach BPF programs to in order to catch traffic to/from the network. This needs to match the interfaces that Calico workload traffic flows over as well as any interfaces that handle incoming traffic to nodeports and services from outside the cluster. It should not match the workload interfaces (usually named cali...). type: string bpfDisableUnprivileged: description: 'BPFDisableUnprivileged, if enabled, Felix sets the kernel.unprivileged_bpf_disabled sysctl to disable unprivileged use of BPF. This ensures that unprivileged users cannot access Calico''s BPF maps and cannot insert their own BPF programs to interfere with Calico''s. [Default: true]' type: boolean bpfEnabled: description: 'BPFEnabled, if enabled Felix will use the BPF dataplane. [Default: false]' type: boolean bpfExternalServiceMode: description: 'BPFExternalServiceMode in BPF mode, controls how connections from outside the cluster to services (node ports and cluster IPs) are forwarded to remote workloads. If set to "Tunnel" then both request and response traffic is tunneled to the remote node. If set to "DSR", the request traffic is tunneled but the response traffic is sent directly from the remote node. In "DSR" mode, the remote node appears to use the IP of the ingress node; this requires a permissive L2 network. [Default: Tunnel]' type: string bpfKubeProxyEndpointSlicesEnabled: description: BPFKubeProxyEndpointSlicesEnabled in BPF mode, controls whether Felix's embedded kube-proxy accepts EndpointSlices or not. type: boolean bpfKubeProxyIptablesCleanupEnabled: description: 'BPFKubeProxyIptablesCleanupEnabled, if enabled in BPF mode, Felix will proactively clean up the upstream Kubernetes kube-proxy''s iptables chains. Should only be enabled if kube-proxy is not running. [Default: true]' type: boolean bpfKubeProxyMinSyncPeriod: description: 'BPFKubeProxyMinSyncPeriod, in BPF mode, controls the minimum time between updates to the dataplane for Felix''s embedded kube-proxy. Lower values give reduced set-up latency. Higher values reduce Felix CPU usage by batching up more work. [Default: 1s]' type: string bpfLogLevel: description: 'BPFLogLevel controls the log level of the BPF programs when in BPF dataplane mode. One of "Off", "Info", or "Debug". The logs are emitted to the BPF trace pipe, accessible with the command `tc exec bpf debug`. [Default: Off].' type: string chainInsertMode: description: 'ChainInsertMode controls whether Felix hooks the kernel''s top-level iptables chains by inserting a rule at the top of the chain or by appending a rule at the bottom. insert is the safe default since it prevents Calico''s rules from being bypassed. If you switch to append mode, be sure that the other rules in the chains signal acceptance by falling through to the Calico rules, otherwise the Calico policy will be bypassed. [Default: insert]' type: string dataplaneDriver: type: string debugDisableLogDropping: type: boolean debugMemoryProfilePath: type: string debugSimulateCalcGraphHangAfter: type: string debugSimulateDataplaneHangAfter: type: string defaultEndpointToHostAction: description: 'DefaultEndpointToHostAction controls what happens to traffic that goes from a workload endpoint to the host itself (after the traffic hits the endpoint egress policy). By default Calico blocks traffic from workload endpoints to the host itself with an iptables “DROP” action. If you want to allow some or all traffic from endpoint to host, set this parameter to RETURN or ACCEPT. Use RETURN if you have your own rules in the iptables “INPUT” chain; Calico will insert its rules at the top of that chain, then “RETURN” packets to the “INPUT” chain once it has completed processing workload endpoint egress policy. Use ACCEPT to unconditionally accept packets from workloads after processing workload endpoint egress policy. [Default: Drop]' type: string deviceRouteProtocol: description: This defines the route protocol added to programmed device routes, by default this will be RTPROT_BOOT when left blank. type: integer deviceRouteSourceAddress: description: This is the source address to use on programmed device routes. By default the source address is left blank, leaving the kernel to choose the source address used. type: string disableConntrackInvalidCheck: type: boolean endpointReportingDelay: type: string endpointReportingEnabled: type: boolean externalNodesList: description: ExternalNodesCIDRList is a list of CIDR's of external-non-calico-nodes which may source tunnel traffic and have the tunneled traffic be accepted at calico nodes. items: type: string type: array failsafeInboundHostPorts: description: 'FailsafeInboundHostPorts is a comma-delimited list of UDP/TCP ports that Felix will allow incoming traffic to host endpoints on irrespective of the security policy. This is useful to avoid accidentally cutting off a host with incorrect configuration. Each port should be specified as tcp: or udp:. For back-compatibility, if the protocol is not specified, it defaults to “tcp”. To disable all inbound host ports, use the value none. The default value allows ssh access and DHCP. [Default: tcp:22, udp:68, tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667]' items: description: ProtoPort is combination of protocol and port, both must be specified. properties: port: type: integer protocol: type: string required: - port - protocol type: object type: array failsafeOutboundHostPorts: description: 'FailsafeOutboundHostPorts is a comma-delimited list of UDP/TCP ports that Felix will allow outgoing traffic from host endpoints to irrespective of the security policy. This is useful to avoid accidentally cutting off a host with incorrect configuration. Each port should be specified as tcp: or udp:. For back-compatibility, if the protocol is not specified, it defaults to “tcp”. To disable all outbound host ports, use the value none. The default value opens etcd''s standard ports to ensure that Felix does not get cut off from etcd as well as allowing DHCP and DNS. [Default: tcp:179, tcp:2379, tcp:2380, tcp:6443, tcp:6666, tcp:6667, udp:53, udp:67]' items: description: ProtoPort is combination of protocol and port, both must be specified. properties: port: type: integer protocol: type: string required: - port - protocol type: object type: array featureDetectOverride: description: FeatureDetectOverride is used to override the feature detection. Values are specified in a comma separated list with no spaces, example; "SNATFullyRandom=true,MASQFullyRandom=false,RestoreSupportsLock=". "true" or "false" will force the feature, empty or omitted values are auto-detected. type: string genericXDPEnabled: description: 'GenericXDPEnabled enables Generic XDP so network cards that don''t support XDP offload or driver modes can use XDP. This is not recommended since it doesn''t provide better performance than iptables. [Default: false]' type: boolean healthEnabled: type: boolean healthHost: type: string healthPort: type: integer interfaceExclude: description: 'InterfaceExclude is a comma-separated list of interfaces that Felix should exclude when monitoring for host endpoints. The default value ensures that Felix ignores Kubernetes'' IPVS dummy interface, which is used internally by kube-proxy. If you want to exclude multiple interface names using a single value, the list supports regular expressions. For regular expressions you must wrap the value with ''/''. For example having values ''/^kube/,veth1'' will exclude all interfaces that begin with ''kube'' and also the interface ''veth1''. [Default: kube-ipvs0]' type: string interfacePrefix: description: 'InterfacePrefix is the interface name prefix that identifies workload endpoints and so distinguishes them from host endpoint interfaces. Note: in environments other than bare metal, the orchestrators configure this appropriately. For example our Kubernetes and Docker integrations set the ''cali'' value, and our OpenStack integration sets the ''tap'' value. [Default: cali]' type: string interfaceRefreshInterval: description: InterfaceRefreshInterval is the period at which Felix rescans local interfaces to verify their state. The rescan can be disabled by setting the interval to 0. type: string ipipEnabled: type: boolean ipipMTU: description: 'IPIPMTU is the MTU to set on the tunnel device. See Configuring MTU [Default: 1440]' type: integer ipsetsRefreshInterval: description: 'IpsetsRefreshInterval is the period at which Felix re-checks all iptables state to ensure that no other process has accidentally broken Calico''s rules. Set to 0 to disable iptables refresh. [Default: 90s]' type: string iptablesBackend: description: IptablesBackend specifies which backend of iptables will be used. The default is legacy. type: string iptablesFilterAllowAction: type: string iptablesLockFilePath: description: 'IptablesLockFilePath is the location of the iptables lock file. You may need to change this if the lock file is not in its standard location (for example if you have mapped it into Felix''s container at a different path). [Default: /run/xtables.lock]' type: string iptablesLockProbeInterval: description: 'IptablesLockProbeInterval is the time that Felix will wait between attempts to acquire the iptables lock if it is not available. Lower values make Felix more responsive when the lock is contended, but use more CPU. [Default: 50ms]' type: string iptablesLockTimeout: description: 'IptablesLockTimeout is the time that Felix will wait for the iptables lock, or 0, to disable. To use this feature, Felix must share the iptables lock file with all other processes that also take the lock. When running Felix inside a container, this requires the /run directory of the host to be mounted into the calico/node or calico/felix container. [Default: 0s disabled]' type: string iptablesMangleAllowAction: type: string iptablesMarkMask: description: 'IptablesMarkMask is the mask that Felix selects its IPTables Mark bits from. Should be a 32 bit hexadecimal number with at least 8 bits set, none of which clash with any other mark bits in use on the system. [Default: 0xff000000]' format: int32 type: integer iptablesNATOutgoingInterfaceFilter: type: string iptablesPostWriteCheckInterval: description: 'IptablesPostWriteCheckInterval is the period after Felix has done a write to the dataplane that it schedules an extra read back in order to check the write was not clobbered by another process. This should only occur if another application on the system doesn''t respect the iptables lock. [Default: 1s]' type: string iptablesRefreshInterval: description: 'IptablesRefreshInterval is the period at which Felix re-checks the IP sets in the dataplane to ensure that no other process has accidentally broken Calico''s rules. Set to 0 to disable IP sets refresh. Note: the default for this value is lower than the other refresh intervals as a workaround for a Linux kernel bug that was fixed in kernel version 4.11. If you are using v4.11 or greater you may want to set this to, a higher value to reduce Felix CPU usage. [Default: 10s]' type: string ipv6Support: type: boolean kubeNodePortRanges: description: 'KubeNodePortRanges holds list of port ranges used for service node ports. Only used if felix detects kube-proxy running in ipvs mode. Felix uses these ranges to separate host and workload traffic. [Default: 30000:32767].' items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array logFilePath: description: 'LogFilePath is the full path to the Felix log. Set to none to disable file logging. [Default: /var/log/calico/felix.log]' type: string logPrefix: description: 'LogPrefix is the log prefix that Felix uses when rendering LOG rules. [Default: calico-packet]' type: string logSeverityFile: description: 'LogSeverityFile is the log severity above which logs are sent to the log file. [Default: Info]' type: string logSeverityScreen: description: 'LogSeverityScreen is the log severity above which logs are sent to the stdout. [Default: Info]' type: string logSeveritySys: description: 'LogSeveritySys is the log severity above which logs are sent to the syslog. Set to None for no logging to syslog. [Default: Info]' type: string maxIpsetSize: type: integer metadataAddr: description: 'MetadataAddr is the IP address or domain name of the server that can answer VM queries for cloud-init metadata. In OpenStack, this corresponds to the machine running nova-api (or in Ubuntu, nova-api-metadata). A value of none (case insensitive) means that Felix should not set up any NAT rule for the metadata path. [Default: 127.0.0.1]' type: string metadataPort: description: 'MetadataPort is the port of the metadata server. This, combined with global.MetadataAddr (if not ''None''), is used to set up a NAT rule, from 169.254.169.254:80 to MetadataAddr:MetadataPort. In most cases this should not need to be changed [Default: 8775].' type: integer mtuIfacePattern: description: MTUIfacePattern is a regular expression that controls which interfaces Felix should scan in order to calculate the host's MTU. This should not match workload interfaces (usually named cali...). type: string natOutgoingAddress: description: NATOutgoingAddress specifies an address to use when performing source NAT for traffic in a natOutgoing pool that is leaving the network. By default the address used is an address on the interface the traffic is leaving on (ie it uses the iptables MASQUERADE target) type: string natPortRange: anyOf: - type: integer - type: string description: NATPortRange specifies the range of ports that is used for port mapping when doing outgoing NAT. When unset the default behavior of the network stack is used. pattern: ^.* x-kubernetes-int-or-string: true netlinkTimeout: type: string openstackRegion: description: 'OpenstackRegion is the name of the region that a particular Felix belongs to. In a multi-region Calico/OpenStack deployment, this must be configured somehow for each Felix (here in the datamodel, or in felix.cfg or the environment on each compute node), and must match the [calico] openstack_region value configured in neutron.conf on each node. [Default: Empty]' type: string policySyncPathPrefix: description: 'PolicySyncPathPrefix is used to by Felix to communicate policy changes to external services, like Application layer policy. [Default: Empty]' type: string prometheusGoMetricsEnabled: description: 'PrometheusGoMetricsEnabled disables Go runtime metrics collection, which the Prometheus client does by default, when set to false. This reduces the number of metrics reported, reducing Prometheus load. [Default: true]' type: boolean prometheusMetricsEnabled: description: 'PrometheusMetricsEnabled enables the Prometheus metrics server in Felix if set to true. [Default: false]' type: boolean prometheusMetricsHost: description: 'PrometheusMetricsHost is the host that the Prometheus metrics server should bind to. [Default: empty]' type: string prometheusMetricsPort: description: 'PrometheusMetricsPort is the TCP port that the Prometheus metrics server should bind to. [Default: 9091]' type: integer prometheusProcessMetricsEnabled: description: 'PrometheusProcessMetricsEnabled disables process metrics collection, which the Prometheus client does by default, when set to false. This reduces the number of metrics reported, reducing Prometheus load. [Default: true]' type: boolean removeExternalRoutes: description: Whether or not to remove device routes that have not been programmed by Felix. Disabling this will allow external applications to also add device routes. This is enabled by default which means we will remove externally added routes. type: boolean reportingInterval: description: 'ReportingInterval is the interval at which Felix reports its status into the datastore or 0 to disable. Must be non-zero in OpenStack deployments. [Default: 30s]' type: string reportingTTL: description: 'ReportingTTL is the time-to-live setting for process-wide status reports. [Default: 90s]' type: string routeRefreshInterval: description: 'RouteRefreshInterval is the period at which Felix re-checks the routes in the dataplane to ensure that no other process has accidentally broken Calico''s rules. Set to 0 to disable route refresh. [Default: 90s]' type: string routeSource: description: 'RouteSource configures where Felix gets its routing information. - WorkloadIPs: use workload endpoints to construct routes. - CalicoIPAM: the default - use IPAM data to construct routes.' type: string routeTableRange: description: Calico programs additional Linux route tables for various purposes. RouteTableRange specifies the indices of the route tables that Calico should use. properties: max: type: integer min: type: integer required: - max - min type: object serviceLoopPrevention: description: 'When service IP advertisement is enabled, prevent routing loops to service IPs that are not in use, by dropping or rejecting packets that do not get DNAT''d by kube-proxy. Unless set to "Disabled", in which case such routing loops continue to be allowed. [Default: Drop]' type: string sidecarAccelerationEnabled: description: 'SidecarAccelerationEnabled enables experimental sidecar acceleration [Default: false]' type: boolean usageReportingEnabled: description: 'UsageReportingEnabled reports anonymous Calico version number and cluster size to projectcalico.org. Logs warnings returned by the usage server. For example, if a significant security vulnerability has been discovered in the version of Calico being used. [Default: true]' type: boolean usageReportingInitialDelay: description: 'UsageReportingInitialDelay controls the minimum delay before Felix makes a report. [Default: 300s]' type: string usageReportingInterval: description: 'UsageReportingInterval controls the interval at which Felix makes reports. [Default: 86400s]' type: string useInternalDataplaneDriver: type: boolean vxlanEnabled: type: boolean vxlanMTU: description: 'VXLANMTU is the MTU to set on the tunnel device. See Configuring MTU [Default: 1440]' type: integer vxlanPort: type: integer vxlanVNI: type: integer wireguardEnabled: description: 'WireguardEnabled controls whether Wireguard is enabled. [Default: false]' type: boolean wireguardInterfaceName: description: 'WireguardInterfaceName specifies the name to use for the Wireguard interface. [Default: wg.calico]' type: string wireguardListeningPort: description: 'WireguardListeningPort controls the listening port used by Wireguard. [Default: 51820]' type: integer wireguardMTU: description: 'WireguardMTU controls the MTU on the Wireguard interface. See Configuring MTU [Default: 1420]' type: integer wireguardRoutingRulePriority: description: 'WireguardRoutingRulePriority controls the priority value to use for the Wireguard routing rule. [Default: 99]' type: integer xdpEnabled: description: 'XDPEnabled enables XDP acceleration for suitable untracked incoming deny rules. [Default: true]' type: boolean xdpRefreshInterval: description: 'XDPRefreshInterval is the period at which Felix re-checks all XDP state to ensure that no other process has accidentally broken Calico''s BPF maps or attached programs. Set to 0 to disable XDP refresh. [Default: 90s]' type: string type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: globalnetworkpolicies.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: GlobalNetworkPolicy listKind: GlobalNetworkPolicyList plural: globalnetworkpolicies singular: globalnetworkpolicy scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: properties: applyOnForward: description: ApplyOnForward indicates to apply the rules in this policy on forward traffic. type: boolean doNotTrack: description: DoNotTrack indicates whether packets matched by the rules in this policy should go through the data plane's connection tracking, such as Linux conntrack. If True, the rules in this policy are applied before any data plane connection tracking, and packets allowed by this policy are marked as not to be tracked. type: boolean egress: description: The ordered set of egress rules. Each rule contains a set of packet match criteria and a corresponding action to apply. items: description: "A Rule encapsulates a set of match criteria and an action. Both selector-based security Policy and security Profiles reference rules - separated out as a list of rules for both ingress and egress packet matching. \n Each positive match criteria has a negated version, prefixed with ”Not”. All the match criteria within a rule must be satisfied for a packet to match. A single rule can contain the positive and negative version of a match and both must be satisfied for the rule to match." properties: action: type: string destination: description: Destination contains the match criteria that apply to destination entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object http: description: HTTP contains match criteria that apply to HTTP requests. properties: methods: description: Methods is an optional field that restricts the rule to apply only to HTTP requests that use one of the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple methods are OR'd together. items: type: string type: array paths: description: 'Paths is an optional field that restricts the rule to apply to HTTP requests that use one of the listed HTTP Paths. Multiple paths are OR''d together. e.g: - exact: /foo - prefix: /bar NOTE: Each entry may ONLY specify either a `exact` or a `prefix` match. The validator will check for it.' items: description: 'HTTPPath specifies an HTTP path to match. It may be either of the form: exact: : which matches the path exactly or prefix: : which matches the path prefix' properties: exact: type: string prefix: type: string type: object type: array type: object icmp: description: ICMP is an optional field that restricts the rule to apply to a specific type and code of ICMP traffic. This should only be specified if the Protocol field is set to "ICMP" or "ICMPv6". properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object ipVersion: description: IPVersion is an optional field that restricts the rule to only match a specific IP version. type: integer metadata: description: Metadata contains additional information for this rule properties: annotations: additionalProperties: type: string description: Annotations is a set of key value pairs that give extra information about the rule type: object type: object notICMP: description: NotICMP is the negated version of the ICMP field. properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object notProtocol: anyOf: - type: integer - type: string description: NotProtocol is the negated version of the Protocol field. pattern: ^.* x-kubernetes-int-or-string: true protocol: anyOf: - type: integer - type: string description: "Protocol is an optional field that restricts the rule to only apply to traffic of a specific IP protocol. Required if any of the EntityRules contain Ports (because ports only apply to certain protocols). \n Must be one of these string values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", \"UDPLite\" or an integer in the range 1-255." pattern: ^.* x-kubernetes-int-or-string: true source: description: Source contains the match criteria that apply to source entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object required: - action type: object type: array ingress: description: The ordered set of ingress rules. Each rule contains a set of packet match criteria and a corresponding action to apply. items: description: "A Rule encapsulates a set of match criteria and an action. Both selector-based security Policy and security Profiles reference rules - separated out as a list of rules for both ingress and egress packet matching. \n Each positive match criteria has a negated version, prefixed with ”Not”. All the match criteria within a rule must be satisfied for a packet to match. A single rule can contain the positive and negative version of a match and both must be satisfied for the rule to match." properties: action: type: string destination: description: Destination contains the match criteria that apply to destination entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object http: description: HTTP contains match criteria that apply to HTTP requests. properties: methods: description: Methods is an optional field that restricts the rule to apply only to HTTP requests that use one of the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple methods are OR'd together. items: type: string type: array paths: description: 'Paths is an optional field that restricts the rule to apply to HTTP requests that use one of the listed HTTP Paths. Multiple paths are OR''d together. e.g: - exact: /foo - prefix: /bar NOTE: Each entry may ONLY specify either a `exact` or a `prefix` match. The validator will check for it.' items: description: 'HTTPPath specifies an HTTP path to match. It may be either of the form: exact: : which matches the path exactly or prefix: : which matches the path prefix' properties: exact: type: string prefix: type: string type: object type: array type: object icmp: description: ICMP is an optional field that restricts the rule to apply to a specific type and code of ICMP traffic. This should only be specified if the Protocol field is set to "ICMP" or "ICMPv6". properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object ipVersion: description: IPVersion is an optional field that restricts the rule to only match a specific IP version. type: integer metadata: description: Metadata contains additional information for this rule properties: annotations: additionalProperties: type: string description: Annotations is a set of key value pairs that give extra information about the rule type: object type: object notICMP: description: NotICMP is the negated version of the ICMP field. properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object notProtocol: anyOf: - type: integer - type: string description: NotProtocol is the negated version of the Protocol field. pattern: ^.* x-kubernetes-int-or-string: true protocol: anyOf: - type: integer - type: string description: "Protocol is an optional field that restricts the rule to only apply to traffic of a specific IP protocol. Required if any of the EntityRules contain Ports (because ports only apply to certain protocols). \n Must be one of these string values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", \"UDPLite\" or an integer in the range 1-255." pattern: ^.* x-kubernetes-int-or-string: true source: description: Source contains the match criteria that apply to source entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object required: - action type: object type: array namespaceSelector: description: NamespaceSelector is an optional field for an expression used to select a pod based on namespaces. type: string order: description: Order is an optional field that specifies the order in which the policy is applied. Policies with higher "order" are applied after those with lower order. If the order is omitted, it may be considered to be "infinite" - i.e. the policy will be applied last. Policies with identical order will be applied in alphanumerical order based on the Policy "Name". type: number preDNAT: description: PreDNAT indicates to apply the rules in this policy before any DNAT. type: boolean selector: description: "The selector is an expression used to pick pick out the endpoints that the policy should be applied to. \n Selector expressions follow this syntax: \n \tlabel == \"string_literal\" \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" \ -> not equal; also matches if label is not present \tlabel in { \"a\", \"b\", \"c\", ... } -> true if the value of label X is one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", ... } -> true if the value of label X is not one of \"a\", \"b\", \"c\" \thas(label_name) -> True if that label is present \t! expr -> negation of expr \texpr && expr -> Short-circuit and \texpr || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() or the empty selector -> matches all endpoints. \n Label names are allowed to contain alphanumerics, -, _ and /. String literals are more permissive but they do not support escape characters. \n Examples (with made-up labels): \n \ttype == \"webserver\" && deployment == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != \"dev\" \t! has(label_name)" type: string serviceAccountSelector: description: ServiceAccountSelector is an optional field for an expression used to select a pod based on service accounts. type: string types: description: "Types indicates whether this policy applies to ingress, or to egress, or to both. When not explicitly specified (and so the value on creation is empty or nil), Calico defaults Types according to what Ingress and Egress rules are present in the policy. The default is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including the case where there are also no Ingress rules) \n - [ PolicyTypeEgress ], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are both Ingress and Egress rules. \n When the policy is read back again, Types will always be one of these values, never empty or nil." items: description: PolicyType enumerates the possible values of the PolicySpec Types field. type: string type: array type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: globalnetworksets.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: GlobalNetworkSet listKind: GlobalNetworkSetList plural: globalnetworksets singular: globalnetworkset scope: Cluster versions: - name: v1 schema: openAPIV3Schema: description: GlobalNetworkSet contains a set of arbitrary IP sub-networks/CIDRs that share labels to allow rules to refer to them via selectors. The labels of GlobalNetworkSet are not namespaced. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: GlobalNetworkSetSpec contains the specification for a NetworkSet resource. properties: nets: description: The list of IP networks that belong to this set. items: type: string type: array type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: hostendpoints.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: HostEndpoint listKind: HostEndpointList plural: hostendpoints singular: hostendpoint scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: HostEndpointSpec contains the specification for a HostEndpoint resource. properties: expectedIPs: description: "The expected IP addresses (IPv4 and IPv6) of the endpoint. If \"InterfaceName\" is not present, Calico will look for an interface matching any of the IPs in the list and apply policy to that. Note: \tWhen using the selector match criteria in an ingress or egress security Policy \tor Profile, Calico converts the selector into a set of IP addresses. For host \tendpoints, the ExpectedIPs field is used for that purpose. (If only the interface \tname is specified, Calico does not learn the IPs of the interface for use in match \tcriteria.)" items: type: string type: array interfaceName: description: "Either \"*\", or the name of a specific Linux interface to apply policy to; or empty. \"*\" indicates that this HostEndpoint governs all traffic to, from or through the default network namespace of the host named by the \"Node\" field; entering and leaving that namespace via any interface, including those from/to non-host-networked local workloads. \n If InterfaceName is not \"*\", this HostEndpoint only governs traffic that enters or leaves the host through the specific interface named by InterfaceName, or - when InterfaceName is empty - through the specific interface that has one of the IPs in ExpectedIPs. Therefore, when InterfaceName is empty, at least one expected IP must be specified. Only external interfaces (such as “eth0”) are supported here; it isn't possible for a HostEndpoint to protect traffic through a specific local workload interface. \n Note: Only some kinds of policy are implemented for \"*\" HostEndpoints; initially just pre-DNAT policy. Please check Calico documentation for the latest position." type: string node: description: The node name identifying the Calico node instance. type: string ports: description: Ports contains the endpoint's named ports, which may be referenced in security policy rules. items: properties: name: type: string port: type: integer protocol: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true required: - name - port - protocol type: object type: array profiles: description: A list of identifiers of security Profile objects that apply to this endpoint. Each profile is applied in the order that they appear in this list. Profile rules are applied after the selector-based security policy. items: type: string type: array type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: ipamblocks.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: IPAMBlock listKind: IPAMBlockList plural: ipamblocks singular: ipamblock scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: IPAMBlockSpec contains the specification for an IPAMBlock resource. properties: affinity: type: string allocations: items: type: integer # TODO: This nullable is manually added in. We should update controller-gen # to handle []*int properly itself. nullable: true type: array attributes: items: properties: handle_id: type: string secondary: additionalProperties: type: string type: object type: object type: array cidr: type: string deleted: type: boolean strictAffinity: type: boolean unallocated: items: type: integer type: array required: - allocations - attributes - cidr - strictAffinity - unallocated type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: ipamconfigs.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: IPAMConfig listKind: IPAMConfigList plural: ipamconfigs singular: ipamconfig scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: IPAMConfigSpec contains the specification for an IPAMConfig resource. properties: autoAllocateBlocks: type: boolean maxBlocksPerHost: description: MaxBlocksPerHost, if non-zero, is the max number of blocks that can be affine to each host. type: integer strictAffinity: type: boolean required: - autoAllocateBlocks - strictAffinity type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: ipamhandles.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: IPAMHandle listKind: IPAMHandleList plural: ipamhandles singular: ipamhandle scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: IPAMHandleSpec contains the specification for an IPAMHandle resource. properties: block: additionalProperties: type: integer type: object deleted: type: boolean handleID: type: string required: - block - handleID type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: ippools.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: IPPool listKind: IPPoolList plural: ippools singular: ippool scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: IPPoolSpec contains the specification for an IPPool resource. properties: blockSize: description: The block size to use for IP address assignments from this pool. Defaults to 26 for IPv4 and 112 for IPv6. type: integer cidr: description: The pool CIDR. type: string disabled: description: When disabled is true, Calico IPAM will not assign addresses from this pool. type: boolean ipip: description: 'Deprecated: this field is only used for APIv1 backwards compatibility. Setting this field is not allowed, this field is for internal use only.' properties: enabled: description: When enabled is true, ipip tunneling will be used to deliver packets to destinations within this pool. type: boolean mode: description: The IPIP mode. This can be one of "always" or "cross-subnet". A mode of "always" will also use IPIP tunneling for routing to destination IP addresses within this pool. A mode of "cross-subnet" will only use IPIP tunneling when the destination node is on a different subnet to the originating node. The default value (if not specified) is "always". type: string type: object ipipMode: description: Contains configuration for IPIP tunneling for this pool. If not specified, then this is defaulted to "Never" (i.e. IPIP tunneling is disabled). type: string nat-outgoing: description: 'Deprecated: this field is only used for APIv1 backwards compatibility. Setting this field is not allowed, this field is for internal use only.' type: boolean natOutgoing: description: When nat-outgoing is true, packets sent from Calico networked containers in this pool to destinations outside of this pool will be masqueraded. type: boolean nodeSelector: description: Allows IPPool to allocate for a specific node by label selector. type: string vxlanMode: description: Contains configuration for VXLAN tunneling for this pool. If not specified, then this is defaulted to "Never" (i.e. VXLAN tunneling is disabled). type: string required: - cidr type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: kubecontrollersconfigurations.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: KubeControllersConfiguration listKind: KubeControllersConfigurationList plural: kubecontrollersconfigurations singular: kubecontrollersconfiguration scope: Cluster versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: KubeControllersConfigurationSpec contains the values of the Kubernetes controllers configuration. properties: controllers: description: Controllers enables and configures individual Kubernetes controllers properties: namespace: description: Namespace enables and configures the namespace controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object node: description: Node enables and configures the node controller. Enabled by default, set to nil to disable. properties: hostEndpoint: description: HostEndpoint controls syncing nodes to host endpoints. Disabled by default, set to nil to disable. properties: autoCreate: description: 'AutoCreate enables automatic creation of host endpoints for every node. [Default: Disabled]' type: string type: object reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string syncLabels: description: 'SyncLabels controls whether to copy Kubernetes node labels to Calico nodes. [Default: Enabled]' type: string type: object policy: description: Policy enables and configures the policy controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object serviceAccount: description: ServiceAccount enables and configures the service account controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object workloadEndpoint: description: WorkloadEndpoint enables and configures the workload endpoint controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object type: object etcdV3CompactionPeriod: description: 'EtcdV3CompactionPeriod is the period between etcdv3 compaction requests. Set to 0 to disable. [Default: 10m]' type: string healthChecks: description: 'HealthChecks enables or disables support for health checks [Default: Enabled]' type: string logSeverityScreen: description: 'LogSeverityScreen is the log severity above which logs are sent to the stdout. [Default: Info]' type: string required: - controllers type: object status: description: KubeControllersConfigurationStatus represents the status of the configuration. It's useful for admins to be able to see the actual config that was applied, which can be modified by environment variables on the kube-controllers process. properties: environmentVars: additionalProperties: type: string description: EnvironmentVars contains the environment variables on the kube-controllers that influenced the RunningConfig. type: object runningConfig: description: RunningConfig contains the effective config that is running in the kube-controllers pod, after merging the API resource with any environment variables. properties: controllers: description: Controllers enables and configures individual Kubernetes controllers properties: namespace: description: Namespace enables and configures the namespace controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object node: description: Node enables and configures the node controller. Enabled by default, set to nil to disable. properties: hostEndpoint: description: HostEndpoint controls syncing nodes to host endpoints. Disabled by default, set to nil to disable. properties: autoCreate: description: 'AutoCreate enables automatic creation of host endpoints for every node. [Default: Disabled]' type: string type: object reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string syncLabels: description: 'SyncLabels controls whether to copy Kubernetes node labels to Calico nodes. [Default: Enabled]' type: string type: object policy: description: Policy enables and configures the policy controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object serviceAccount: description: ServiceAccount enables and configures the service account controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object workloadEndpoint: description: WorkloadEndpoint enables and configures the workload endpoint controller. Enabled by default, set to nil to disable. properties: reconcilerPeriod: description: 'ReconcilerPeriod is the period to perform reconciliation with the Calico datastore. [Default: 5m]' type: string type: object type: object etcdV3CompactionPeriod: description: 'EtcdV3CompactionPeriod is the period between etcdv3 compaction requests. Set to 0 to disable. [Default: 10m]' type: string healthChecks: description: 'HealthChecks enables or disables support for health checks [Default: Enabled]' type: string logSeverityScreen: description: 'LogSeverityScreen is the log severity above which logs are sent to the stdout. [Default: Info]' type: string required: - controllers type: object type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: networkpolicies.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: NetworkPolicy listKind: NetworkPolicyList plural: networkpolicies singular: networkpolicy scope: Namespaced versions: - name: v1 schema: openAPIV3Schema: properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: properties: egress: description: The ordered set of egress rules. Each rule contains a set of packet match criteria and a corresponding action to apply. items: description: "A Rule encapsulates a set of match criteria and an action. Both selector-based security Policy and security Profiles reference rules - separated out as a list of rules for both ingress and egress packet matching. \n Each positive match criteria has a negated version, prefixed with ”Not”. All the match criteria within a rule must be satisfied for a packet to match. A single rule can contain the positive and negative version of a match and both must be satisfied for the rule to match." properties: action: type: string destination: description: Destination contains the match criteria that apply to destination entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object http: description: HTTP contains match criteria that apply to HTTP requests. properties: methods: description: Methods is an optional field that restricts the rule to apply only to HTTP requests that use one of the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple methods are OR'd together. items: type: string type: array paths: description: 'Paths is an optional field that restricts the rule to apply to HTTP requests that use one of the listed HTTP Paths. Multiple paths are OR''d together. e.g: - exact: /foo - prefix: /bar NOTE: Each entry may ONLY specify either a `exact` or a `prefix` match. The validator will check for it.' items: description: 'HTTPPath specifies an HTTP path to match. It may be either of the form: exact: : which matches the path exactly or prefix: : which matches the path prefix' properties: exact: type: string prefix: type: string type: object type: array type: object icmp: description: ICMP is an optional field that restricts the rule to apply to a specific type and code of ICMP traffic. This should only be specified if the Protocol field is set to "ICMP" or "ICMPv6". properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object ipVersion: description: IPVersion is an optional field that restricts the rule to only match a specific IP version. type: integer metadata: description: Metadata contains additional information for this rule properties: annotations: additionalProperties: type: string description: Annotations is a set of key value pairs that give extra information about the rule type: object type: object notICMP: description: NotICMP is the negated version of the ICMP field. properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object notProtocol: anyOf: - type: integer - type: string description: NotProtocol is the negated version of the Protocol field. pattern: ^.* x-kubernetes-int-or-string: true protocol: anyOf: - type: integer - type: string description: "Protocol is an optional field that restricts the rule to only apply to traffic of a specific IP protocol. Required if any of the EntityRules contain Ports (because ports only apply to certain protocols). \n Must be one of these string values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", \"UDPLite\" or an integer in the range 1-255." pattern: ^.* x-kubernetes-int-or-string: true source: description: Source contains the match criteria that apply to source entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object required: - action type: object type: array ingress: description: The ordered set of ingress rules. Each rule contains a set of packet match criteria and a corresponding action to apply. items: description: "A Rule encapsulates a set of match criteria and an action. Both selector-based security Policy and security Profiles reference rules - separated out as a list of rules for both ingress and egress packet matching. \n Each positive match criteria has a negated version, prefixed with ”Not”. All the match criteria within a rule must be satisfied for a packet to match. A single rule can contain the positive and negative version of a match and both must be satisfied for the rule to match." properties: action: type: string destination: description: Destination contains the match criteria that apply to destination entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object http: description: HTTP contains match criteria that apply to HTTP requests. properties: methods: description: Methods is an optional field that restricts the rule to apply only to HTTP requests that use one of the listed HTTP Methods (e.g. GET, PUT, etc.) Multiple methods are OR'd together. items: type: string type: array paths: description: 'Paths is an optional field that restricts the rule to apply to HTTP requests that use one of the listed HTTP Paths. Multiple paths are OR''d together. e.g: - exact: /foo - prefix: /bar NOTE: Each entry may ONLY specify either a `exact` or a `prefix` match. The validator will check for it.' items: description: 'HTTPPath specifies an HTTP path to match. It may be either of the form: exact: : which matches the path exactly or prefix: : which matches the path prefix' properties: exact: type: string prefix: type: string type: object type: array type: object icmp: description: ICMP is an optional field that restricts the rule to apply to a specific type and code of ICMP traffic. This should only be specified if the Protocol field is set to "ICMP" or "ICMPv6". properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object ipVersion: description: IPVersion is an optional field that restricts the rule to only match a specific IP version. type: integer metadata: description: Metadata contains additional information for this rule properties: annotations: additionalProperties: type: string description: Annotations is a set of key value pairs that give extra information about the rule type: object type: object notICMP: description: NotICMP is the negated version of the ICMP field. properties: code: description: Match on a specific ICMP code. If specified, the Type value must also be specified. This is a technical limitation imposed by the kernel's iptables firewall, which Calico uses to enforce the rule. type: integer type: description: Match on a specific ICMP type. For example a value of 8 refers to ICMP Echo Request (i.e. pings). type: integer type: object notProtocol: anyOf: - type: integer - type: string description: NotProtocol is the negated version of the Protocol field. pattern: ^.* x-kubernetes-int-or-string: true protocol: anyOf: - type: integer - type: string description: "Protocol is an optional field that restricts the rule to only apply to traffic of a specific IP protocol. Required if any of the EntityRules contain Ports (because ports only apply to certain protocols). \n Must be one of these string values: \"TCP\", \"UDP\", \"ICMP\", \"ICMPv6\", \"SCTP\", \"UDPLite\" or an integer in the range 1-255." pattern: ^.* x-kubernetes-int-or-string: true source: description: Source contains the match criteria that apply to source entity. properties: namespaceSelector: description: "NamespaceSelector is an optional field that contains a selector expression. Only traffic that originates from (or terminates at) endpoints within the selected namespaces will be matched. When both NamespaceSelector and Selector are defined on the same rule, then only workload endpoints that are matched by both selectors will be selected by the rule. \n For NetworkPolicy, an empty NamespaceSelector implies that the Selector is limited to selecting only workload endpoints in the same namespace as the NetworkPolicy. \n For NetworkPolicy, `global()` NamespaceSelector implies that the Selector is limited to selecting only GlobalNetworkSet or HostEndpoint. \n For GlobalNetworkPolicy, an empty NamespaceSelector implies the Selector applies to workload endpoints across all namespaces." type: string nets: description: Nets is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) IP addresses in any of the given subnets. items: type: string type: array notNets: description: NotNets is the negated version of the Nets field. items: type: string type: array notPorts: description: NotPorts is the negated version of the Ports field. Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to "TCP" or "UDP". items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array notSelector: description: NotSelector is the negated version of the Selector field. See Selector field for subtleties with negated selectors. type: string ports: description: "Ports is an optional field that restricts the rule to only apply to traffic that has a source (destination) port that matches one of these ranges/values. This value is a list of integers or strings that represent ranges of ports. \n Since only some protocols have ports, if any ports are specified it requires the Protocol match in the Rule to be set to \"TCP\" or \"UDP\"." items: anyOf: - type: integer - type: string pattern: ^.* x-kubernetes-int-or-string: true type: array selector: description: "Selector is an optional field that contains a selector expression (see Policy for sample syntax). \ Only traffic that originates from (terminates at) endpoints matching the selector will be matched. \n Note that: in addition to the negated version of the Selector (see NotSelector below), the selector expression syntax itself supports negation. The two types of negation are subtly different. One negates the set of matched endpoints, the other negates the whole match: \n \tSelector = \"!has(my_label)\" matches packets that are from other Calico-controlled \tendpoints that do not have the label “my_label”. \n \tNotSelector = \"has(my_label)\" matches packets that are not from Calico-controlled \tendpoints that do have the label “my_label”. \n The effect is that the latter will accept packets from non-Calico sources whereas the former is limited to packets from Calico-controlled endpoints." type: string serviceAccounts: description: ServiceAccounts is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a matching service account. properties: names: description: Names is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account whose name is in the list. items: type: string type: array selector: description: Selector is an optional field that restricts the rule to only apply to traffic that originates from (or terminates at) a pod running as a service account that matches the given label selector. If both Names and Selector are specified then they are AND'ed. type: string type: object type: object required: - action type: object type: array order: description: Order is an optional field that specifies the order in which the policy is applied. Policies with higher "order" are applied after those with lower order. If the order is omitted, it may be considered to be "infinite" - i.e. the policy will be applied last. Policies with identical order will be applied in alphanumerical order based on the Policy "Name". type: number selector: description: "The selector is an expression used to pick pick out the endpoints that the policy should be applied to. \n Selector expressions follow this syntax: \n \tlabel == \"string_literal\" \ -> comparison, e.g. my_label == \"foo bar\" \tlabel != \"string_literal\" \ -> not equal; also matches if label is not present \tlabel in { \"a\", \"b\", \"c\", ... } -> true if the value of label X is one of \"a\", \"b\", \"c\" \tlabel not in { \"a\", \"b\", \"c\", ... } -> true if the value of label X is not one of \"a\", \"b\", \"c\" \thas(label_name) -> True if that label is present \t! expr -> negation of expr \texpr && expr -> Short-circuit and \texpr || expr -> Short-circuit or \t( expr ) -> parens for grouping \tall() or the empty selector -> matches all endpoints. \n Label names are allowed to contain alphanumerics, -, _ and /. String literals are more permissive but they do not support escape characters. \n Examples (with made-up labels): \n \ttype == \"webserver\" && deployment == \"prod\" \ttype in {\"frontend\", \"backend\"} \tdeployment != \"dev\" \t! has(label_name)" type: string serviceAccountSelector: description: ServiceAccountSelector is an optional field for an expression used to select a pod based on service accounts. type: string types: description: "Types indicates whether this policy applies to ingress, or to egress, or to both. When not explicitly specified (and so the value on creation is empty or nil), Calico defaults Types according to what Ingress and Egress are present in the policy. The default is: \n - [ PolicyTypeIngress ], if there are no Egress rules (including the case where there are also no Ingress rules) \n - [ PolicyTypeEgress ], if there are Egress rules but no Ingress rules \n - [ PolicyTypeIngress, PolicyTypeEgress ], if there are both Ingress and Egress rules. \n When the policy is read back again, Types will always be one of these values, never empty or nil." items: description: PolicyType enumerates the possible values of the PolicySpec Types field. type: string type: array type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: name: networksets.crd.projectcalico.org spec: group: crd.projectcalico.org names: kind: NetworkSet listKind: NetworkSetList plural: networksets singular: networkset scope: Namespaced versions: - name: v1 schema: openAPIV3Schema: description: NetworkSet is the Namespaced-equivalent of the GlobalNetworkSet. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: NetworkSetSpec contains the specification for a NetworkSet resource. properties: nets: description: The list of IP networks that belong to this set. items: type: string type: array type: object type: object served: true storage: true status: acceptedNames: kind: "" plural: "" conditions: [] storedVersions: [] --- --- # Source: calico/templates/calico-kube-controllers-rbac.yaml # Include a clusterrole for the kube-controllers component, # and bind it to the calico-kube-controllers serviceaccount. kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1 metadata: name: calico-kube-controllers rules: # Nodes are watched to monitor for deletions. - apiGroups: [""] resources: - nodes verbs: - watch - list - get # Pods are queried to check for existence. - apiGroups: [""] resources: - pods verbs: - get # IPAM resources are manipulated when nodes are deleted. - apiGroups: ["crd.projectcalico.org"] resources: - ippools verbs: - list - apiGroups: ["crd.projectcalico.org"] resources: - blockaffinities - ipamblocks - ipamhandles verbs: - get - list - create - update - delete # kube-controllers manages hostendpoints. - apiGroups: ["crd.projectcalico.org"] resources: - hostendpoints verbs: - get - list - create - update - delete # Needs access to update clusterinformations. - apiGroups: ["crd.projectcalico.org"] resources: - clusterinformations verbs: - get - create - update # KubeControllersConfiguration is where it gets its config - apiGroups: ["crd.projectcalico.org"] resources: - kubecontrollersconfigurations verbs: # read its own config - get # create a default if none exists - create # update status - update # watch for changes - watch --- kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1 metadata: name: calico-kube-controllers roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-kube-controllers subjects: - kind: ServiceAccount name: calico-kube-controllers namespace: kube-system --- --- # Source: calico/templates/calico-node-rbac.yaml # Include a clusterrole for the calico-node DaemonSet, # and bind it to the calico-node serviceaccount. kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1 metadata: name: calico-node rules: # The CNI plugin needs to get pods, nodes, and namespaces. - apiGroups: [""] resources: - pods - nodes - namespaces verbs: - get - apiGroups: [""] resources: - endpoints - services verbs: # Used to discover service IPs for advertisement. - watch - list # Used to discover Typhas. - get # Pod CIDR auto-detection on kubeadm needs access to config maps. - apiGroups: [""] resources: - configmaps verbs: - get - apiGroups: [""] resources: - nodes/status verbs: # Needed for clearing NodeNetworkUnavailable flag. - patch # Calico stores some configuration information in node annotations. - update # Watch for changes to Kubernetes NetworkPolicies. - apiGroups: ["networking.k8s.io"] resources: - networkpolicies verbs: - watch - list # Used by Calico for policy information. - apiGroups: [""] resources: - pods - namespaces - serviceaccounts verbs: - list - watch # The CNI plugin patches pods/status. - apiGroups: [""] resources: - pods/status verbs: - patch # Calico monitors various CRDs for config. - apiGroups: ["crd.projectcalico.org"] resources: - globalfelixconfigs - felixconfigurations - bgppeers - globalbgpconfigs - bgpconfigurations - ippools - ipamblocks - globalnetworkpolicies - globalnetworksets - networkpolicies - networksets - clusterinformations - hostendpoints - blockaffinities verbs: - get - list - watch # Calico must create and update some CRDs on startup. - apiGroups: ["crd.projectcalico.org"] resources: - ippools - felixconfigurations - clusterinformations verbs: - create - update # Calico stores some configuration information on the node. - apiGroups: [""] resources: - nodes verbs: - get - list - watch # These permissions are only required for upgrade from v2.6, and can # be removed after upgrade or on fresh installations. - apiGroups: ["crd.projectcalico.org"] resources: - bgpconfigurations - bgppeers verbs: - create - update # These permissions are required for Calico CNI to perform IPAM allocations. - apiGroups: ["crd.projectcalico.org"] resources: - blockaffinities - ipamblocks - ipamhandles verbs: - get - list - create - update - delete - apiGroups: ["crd.projectcalico.org"] resources: - ipamconfigs verbs: - get # Block affinities must also be watchable by confd for route aggregation. - apiGroups: ["crd.projectcalico.org"] resources: - blockaffinities verbs: - watch # The Calico IPAM migration needs to get daemonsets. These permissions can be # removed if not upgrading from an installation using host-local IPAM. - apiGroups: ["apps"] resources: - daemonsets verbs: - get --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: calico-node roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: calico-node subjects: - kind: ServiceAccount name: calico-node namespace: kube-system --- # Source: calico/templates/calico-node.yaml # This manifest installs the calico-node container, as well # as the CNI plugins and network config on # each master and worker node in a Kubernetes cluster. kind: DaemonSet apiVersion: apps/v1 metadata: name: calico-node namespace: kube-system labels: k8s-app: calico-node spec: selector: matchLabels: k8s-app: calico-node updateStrategy: type: RollingUpdate rollingUpdate: maxUnavailable: 1 template: metadata: labels: k8s-app: calico-node spec: nodeSelector: kubernetes.io/os: linux hostNetwork: true tolerations: # Make sure calico-node gets scheduled on all nodes. - effect: NoSchedule operator: Exists # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - effect: NoExecute operator: Exists serviceAccountName: calico-node # Minimize downtime during a rolling upgrade or deletion; tell Kubernetes to do a "force # deletion": https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods. terminationGracePeriodSeconds: 0 priorityClassName: system-node-critical initContainers: # This container performs upgrade from host-local IPAM to calico-ipam. # It can be deleted if this is a fresh installation, or if you have already # upgraded to use calico-ipam. - name: upgrade-ipam image: docker.io/calico/cni:v3.17.1 command: ["/opt/cni/bin/calico-ipam", "-upgrade"] envFrom: - configMapRef: # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. name: kubernetes-services-endpoint optional: true env: - name: KUBERNETES_NODE_NAME valueFrom: fieldRef: fieldPath: spec.nodeName - name: CALICO_NETWORKING_BACKEND valueFrom: configMapKeyRef: name: calico-config key: calico_backend volumeMounts: - mountPath: /var/lib/cni/networks name: host-local-net-dir - mountPath: /host/opt/cni/bin name: cni-bin-dir securityContext: privileged: true # This container installs the CNI binaries # and CNI network config file on each node. - name: install-cni image: docker.io/calico/cni:v3.17.1 command: ["/opt/cni/bin/install"] envFrom: - configMapRef: # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. name: kubernetes-services-endpoint optional: true env: # Name of the CNI config file to create. - name: CNI_CONF_NAME value: "10-calico.conflist" # The CNI network config to install on each node. - name: CNI_NETWORK_CONFIG valueFrom: configMapKeyRef: name: calico-config key: cni_network_config # Set the hostname based on the k8s node name. - name: KUBERNETES_NODE_NAME valueFrom: fieldRef: fieldPath: spec.nodeName # CNI MTU Config variable - name: CNI_MTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Prevents the container from sleeping forever. - name: SLEEP value: "false" volumeMounts: - mountPath: /host/opt/cni/bin name: cni-bin-dir - mountPath: /host/etc/cni/net.d name: cni-net-dir securityContext: privileged: true # Adds a Flex Volume Driver that creates a per-pod Unix Domain Socket to allow Dikastes # to communicate with Felix over the Policy Sync API. - name: flexvol-driver image: docker.io/calico/pod2daemon-flexvol:v3.17.1 volumeMounts: - name: flexvol-driver-host mountPath: /host/driver securityContext: privileged: true containers: # Runs calico-node container on each Kubernetes node. This # container programs network policy and routes on each # host. - name: calico-node image: docker.io/calico/node:v3.17.1 envFrom: - configMapRef: # Allow KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT to be overridden for eBPF mode. name: kubernetes-services-endpoint optional: true env: # Use Kubernetes API as the backing datastore. - name: DATASTORE_TYPE value: "kubernetes" # Wait for the datastore. - name: WAIT_FOR_DATASTORE value: "true" # Set based on the k8s node name. - name: NODENAME valueFrom: fieldRef: fieldPath: spec.nodeName # Choose the backend to use. - name: CALICO_NETWORKING_BACKEND valueFrom: configMapKeyRef: name: calico-config key: calico_backend # Cluster type to identify the deployment type - name: CLUSTER_TYPE value: "k8s,bgp" # Auto-detect the BGP IP address. #- name: IP # value: "autodetect" # Enable IPIP #- name: CALICO_IPV4POOL_IPIP # value: "Always" # Enable or Disable VXLAN on the default IP pool. - name: CALICO_IPV4POOL_VXLAN value: "Never" # Set MTU for tunnel device used if ipip is enabled - name: FELIX_IPINIPMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Set MTU for the VXLAN tunnel device. - name: FELIX_VXLANMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # Set MTU for the Wireguard tunnel device. - name: FELIX_WIREGUARDMTU valueFrom: configMapKeyRef: name: calico-config key: veth_mtu # The default IPv4 pool to create on startup if none exists. Pod IPs will be # chosen from this range. Changing this value after installation will have # no effect. This should fall within `--cluster-cidr`. # - name: CALICO_IPV4POOL_CIDR # value: "192.168.0.0/16" # Disable file logging so `kubectl logs` works. - name: CALICO_DISABLE_FILE_LOGGING value: "true" # Set Felix endpoint to host default action to ACCEPT. - name: FELIX_DEFAULTENDPOINTTOHOSTACTION value: "ACCEPT" # Disable IPv6 on Kubernetes. #- name: FELIX_IPV6SUPPORT # value: "false" # Set Felix logging to "info" - name: FELIX_LOGSEVERITYSCREEN value: "info" - name: FELIX_HEALTHENABLED value: "true" # Enable IPv6 - name: IP6 value: "autodetect" - name: FELIX_IPV6SUPPORT value: "true" - name: IP value: "none" - name: CALICO_ROUTER_ID value: "hash" - name: CALICO_IPV4POOL_IPIP value: "Never" - name: CALICO_IPV6POOL_CIDR value: "2001:db8:1234:5678:8:2::/104" - name: CALICO_IPV6POOL_BLOCK_SIZE value: "120" securityContext: privileged: true resources: requests: cpu: 250m livenessProbe: exec: command: - /bin/calico-node - -felix-live - -bird-live periodSeconds: 10 initialDelaySeconds: 10 failureThreshold: 6 readinessProbe: exec: command: - /bin/calico-node - -felix-ready - -bird-ready periodSeconds: 10 volumeMounts: - mountPath: /lib/modules name: lib-modules readOnly: true - mountPath: /run/xtables.lock name: xtables-lock readOnly: false - mountPath: /var/run/calico name: var-run-calico readOnly: false - mountPath: /var/lib/calico name: var-lib-calico readOnly: false - name: policysync mountPath: /var/run/nodeagent # For eBPF mode, we need to be able to mount the BPF filesystem at /sys/fs/bpf so we mount in the # parent directory. - name: sysfs mountPath: /sys/fs/ # Bidirectional means that, if we mount the BPF filesystem at /sys/fs/bpf it will propagate to the host. # If the host is known to mount that filesystem already then Bidirectional can be omitted. mountPropagation: Bidirectional - name: cni-log-dir mountPath: /var/log/calico/cni readOnly: true volumes: # Used by calico-node. - name: lib-modules hostPath: path: /lib/modules - name: var-run-calico hostPath: path: /var/run/calico - name: var-lib-calico hostPath: path: /var/lib/calico - name: xtables-lock hostPath: path: /run/xtables.lock type: FileOrCreate - name: sysfs hostPath: path: /sys/fs/ type: DirectoryOrCreate # Used to install CNI. - name: cni-bin-dir hostPath: path: /opt/cni/bin - name: cni-net-dir hostPath: path: /etc/cni/net.d # Used to access CNI logs. - name: cni-log-dir hostPath: path: /var/log/calico/cni # Mount in the directory for host-local IPAM allocations. This is # used when upgrading from host-local to calico-ipam, and can be removed # if not using the upgrade-ipam init container. - name: host-local-net-dir hostPath: path: /var/lib/cni/networks # Used to create per-pod Unix Domain Sockets - name: policysync hostPath: type: DirectoryOrCreate path: /var/run/nodeagent # Used to install Flex Volume Driver - name: flexvol-driver-host hostPath: type: DirectoryOrCreate path: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/nodeagent~uds --- apiVersion: v1 kind: ServiceAccount metadata: name: calico-node namespace: kube-system --- # Source: calico/templates/calico-kube-controllers.yaml # See https://github.com/projectcalico/kube-controllers apiVersion: apps/v1 kind: Deployment metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers spec: # The controllers can only have a single active instance. replicas: 1 selector: matchLabels: k8s-app: calico-kube-controllers strategy: type: Recreate template: metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers spec: nodeSelector: kubernetes.io/os: linux tolerations: # Mark the pod as a critical add-on for rescheduling. - key: CriticalAddonsOnly operator: Exists - key: node-role.kubernetes.io/master effect: NoSchedule serviceAccountName: calico-kube-controllers priorityClassName: system-cluster-critical containers: - name: calico-kube-controllers image: docker.io/calico/kube-controllers:v3.17.1 env: # Choose which controllers to run. - name: ENABLED_CONTROLLERS value: node - name: DATASTORE_TYPE value: kubernetes readinessProbe: exec: command: - /usr/bin/check-status - -r --- apiVersion: v1 kind: ServiceAccount metadata: name: calico-kube-controllers namespace: kube-system --- # This manifest creates a Pod Disruption Budget for Controller to allow K8s Cluster Autoscaler to evict apiVersion: policy/v1beta1 kind: PodDisruptionBudget metadata: name: calico-kube-controllers namespace: kube-system labels: k8s-app: calico-kube-controllers spec: maxUnavailable: 1 selector: matchLabels: k8s-app: calico-kube-controllers --- # Source: calico/templates/calico-etcd-secrets.yaml --- # Source: calico/templates/calico-typha.yaml --- # Source: calico/templates/configure-canal.yaml