# Hacking on snapd Hacking on `snapd` is fun and straightforward. The code is extensively unit tested and we use the [spread](https://github.com/snapcore/spread) integration test framework for the integration/system level tests. For non-technical details on contributing to the project, including how to approach a pull request, see [Contributing to snapd](./CONTRIBUTING.md). ## Setting up ### Supported Ubuntu distributions Ubuntu 18.04 LTS or later is recommended for `snapd` development. Usually, the latest LTS would be the best choice. > If you want to build or test on older versions of Ubuntu, additional steps may be required when installing dependencies. ### Supported Go version Go 1.18 (or later) is required to build `snapd`. > If you need to build older versions of snapd, please have a look at the file [debian/control](debian/control) to find out what dependencies were needed at the time (including which version of the Go compiler). ### Getting the snapd sources The easiest way to get the source for `snapd` is to clone the GitHub repository in a directory where you have read-write permissions, such as your home directory. cd ~/ git clone https://github.com/snapcore/snapd.git cd snapd This will allow you to build and test `snapd`. If you wish to contribute to the `snapd` project, please see [Contributing to snapd](./CONTRIBUTING.md). > For more details about source-code structure of `snapd` please read about [Managing module source](https://go.dev/doc/modules/managing-source) in Go. ### Installing the build dependencies Build dependencies can automatically be resolved using `build-dep` on Ubuntu: cd ~/snapd sudo apt build-dep . Package build dependencies for other distributions can be found under the [./packaging/](./packaging/) directory. Eg. for Fedora use: cd packaging/fedora sudo dnf install -y rpmdevtools sudo dnf install -y $(rpmspec -q --buildrequires snapd.spec) sudo dnf install glibc-static.i686 glibc-devel.i686 Source dependencies are automatically retrieved at build time. Sometimes, it might be useful to pull them without building: ``` cd ~/snapd go get ./... && ./get-deps.sh ``` ## Building ### Building the snap with snapcraft The easiest (though not the most efficient) way to test changes to snapd is to build the snapd snap using _snapcraft_ and then install that snapd snap. The [snapcraft.yaml](./build-aux/snap/snapcraft.yaml) for the snapd snap is located at [./build-aux/](./build-aux/), and can be built using snapcraft. Snapcraft 8.x or later is expected. Install snapcraft: ``` sudo snap install snapcraft ``` Then run snapcraft: ``` snapcraft --channel=latest/stable ``` Now the snapd snap that was just built can be installed with: ``` snap install --dangerous snapd_*.snap ``` To go back to using snapd from the store instead of the custom version we installed (since it will not get updates as it was installed dangerously), you can either use `snap revert snapd`, or you can refresh directly with `snap refresh snapd --stable --amend`. #### Building for other architectures with snapcraft It is also sometimes useful to use snapcraft to build the snapd snap for other architectures using the `remote-build` feature. You can use remote-build with snapcraft on the snapd tree for any desired architectures: ``` snapcraft remote-build --build-for=armhf,s390x,arm64 ``` #### Splicing the snapd snap into the core snap Sometimes while developing you may need to build a version of the _core_ snap with a custom snapd version. The `snapcraft.yaml` for the [core snap](https://github.com/snapcore/core/) currently is complex in that it assumes it is built inside Launchpad with the [ppa:snappy-dev/image](https://launchpad.net/~snappy-dev/+archive/ubuntu/image/) enabled, so it is difficult to inject a custom version of snapd into this by rebuilding the core snap directly, so an easier way is to actually first build the snapd snap and inject the binaries from the snapd snap into the core snap. This currently works since both the snapd snap and the core snap have the same `build-base` of Ubuntu 16.04. However, at some point in time this trick will stop working when the snapd snap starts using a `build-base` other than Ubuntu 16.04, but until then, you can use the following trick to more easily get a custom version of snapd inside a core snap. First follow the steps above to build a full snapd snap. Then, extract the core snap you wish to splice the custom snapd snap into: ``` sudo unsquashfs -d custom-core core_.snap ``` `sudo` is important as the core snap has special permissions on various directories and files that must be preserved as it is a boot base snap. Now, extract the snapd snap, again with sudo because there are `suid` binaries which must retain their permission bits: ``` sudo unsquashfs -d custom-snapd snapd-custom.snap ``` Now, copy the meta directory from the core snap outside to keep it and prevent it from being lost when we replace the files from the snapd snap: ``` sudo cp ./custom-core/meta meta-core-backup ``` Then copy all the files from the snapd snap into the core snap, and delete the meta directory so we don't use any of the meta files from the snapd snap: ``` sudo cp -r ./custom-snapd/* ./custom-core/ sudo rm -r ./custom-core/meta/ sudo cp ./meta-core-backup ./custom-core/ ``` Now we can repack the core snap: ``` sudo snap pack custom-core ``` Sometimes it is helpful to modify the snap version in `./custom-core/meta/snap.yaml` before repacking with `snap pack` so it is easy to identify which snap file is which. ### Building natively To build the `snap` command line client: ``` cd ~/snapd mkdir -p /tmp/build go build -o /tmp/build/snap ./cmd/snap ``` To build the `snapd` REST API daemon: ``` cd ~/snapd mkdir -p /tmp/build go build -o /tmp/build/snapd ./cmd/snapd ``` To build all the `snapd` Go components: ``` cd ~/snapd mkdir -p /tmp/build go build -o /tmp/build ./... ``` ### Building with cross-compilation (_example: ARM v7 target_) Install a suitable cross-compiler for the target architecture. ``` sudo apt-get install gcc-arm-linux-gnueabihf ``` Verify the default architecture version of your GCC cross-compiler. ``` arm-linux-gnueabihf-gcc -v : --with-arch=armv7-a --with-fpu=vfpv3-d16 --with-float=hard --with-mode=thumb ``` Verify the supported Go cross-compile ARM targets [here]( https://github.com/golang/go/wiki/GoArm). `Snapd` depends on [libseccomp](https://github.com/seccomp/libseccomp#readme) v2.3 or later. The following instructions can be used to cross-compile the library: ``` cd ~/ git clone https://github.com/seccomp/libseccomp cd libseccomp ./autogen.sh ./configure --host=arm-linux-gnueabihf --prefix=${HOME}/libseccomp/build make && make install ``` Setup the Go environment for cross-compiling. ```sh export CC=arm-linux-gnueabihf-gcc export CGO_ENABLED=1 export CGO_LDFLAGS="-L${HOME}/libseccomp/build/lib" export GOOS=linux export GOARCH=arm export GOARM=7 ``` The Go environment variables are now explicitly set to target the ARM v7 architecture. Run the same build commands from the Building (natively) section above. Verify the target architecture by looking at the application ELF header. ``` readelf -h /tmp/build/snapd : Class: ELF32 OS/ABI: UNIX - System V Machine: ARM ``` CGO produced ELF binaries contain additional architecture attributes that reflect the exact ARM architecture we targeted. ``` readelf -A /tmp/build/snap-seccomp : File Attributes Tag_CPU_name: "7-A" Tag_CPU_arch: v7 Tag_FP_arch: VFPv3-D16 ``` ## Testing We value good tests, so when you fix a bug or add a new feature we highly encourage you to add tests. Install the following package(s) to satisfy test dependencies. ``` sudo apt-get install python3-yamlordereddictloader dbus-x11 ``` ### Running unit-tests To run the various tests that we have to ensure a high quality source just run: ./run-checks This will check if the source format is consistent, that it builds, all tests work as expected and that "go vet" has nothing to complain about. The source format follows the `gofmt -s` formating. Please run this on your source files if `run-checks` complains about the format. You can run an individual test for a sub-package by changing into that directory and: ``` go test -check.f $testname ``` If a test hangs, you can enable verbose mode: ``` go test -v -check.vv ``` Or, try just `-check.v` for a less verbose output. > Some unit tests are known to fail on locales other than `C.UTF-8`. If you have unit tests failing, try setting `LANG=C.UTF-8` when running `go test`. See [issue #1960131](https://bugs.launchpad.net/snapd/+bug/1960131) for more details. There is more to read about the testing framework on the [website](https://labix.org/gocheck) ### Running integration tests #### Downloading spread framework To run the integration tests locally via QEMU, you need the latest version of the [spread](https://github.com/snapcore/spread) framework. You can get spread, QEMU, and the build tools to build QEMU images with: $ sudo apt update && sudo apt install -y qemu-kvm autopkgtest $ curl https://storage.googleapis.com/snapd-spread-tests/spread/spread-amd64.tar.gz | tar -xz -C > `` can be any directory that is listed in `$PATH`, as it is assumed further in the guidelines of this document. You may consider creating a dedicated directory and adding it to `$PATH`, or you may choose to use one of the conventional Linux directories (e.g. `/usr/local/bin`) #### Building spread VM images To run the spread tests via QEMU you need to create VM images in the `~/.spread/qemu` directory: $ mkdir -p ~/.spread/qemu $ cd ~/.spread/qemu Assuming you are building on Ubuntu 18.04 LTS ([Bionic Beaver](https://releases.ubuntu.com/18.04/)) (or later), run the following to build a 64-bit Ubuntu 16.04 LTS (or later): $ autopkgtest-buildvm-ubuntu-cloud -r $ mv autopkgtest--amd64.img ubuntu--64.img For the correct values of `` and ``, please refer to the official list of [Ubuntu releases](https://wiki.ubuntu.com/Releases). > `` is the first word in the release's full name, e.g. for "Bionic Beaver" it is `bionic`. To build an Ubuntu 14.04 (Trusty Tahr) based VM, use: $ autopkgtest-buildvm-ubuntu-cloud -r trusty --post-command='sudo apt-get install -y --install-recommends linux-generic-lts-xenial && update-grub' $ mv autopkgtest-trusty-amd64.img ubuntu-14.04-64.img > This is because we need at least 4.4+ kernel for snapd to run on Ubuntu 14.04 LTS, which is available through the `linux-generic-lts-xenial` package. If you are running Ubuntu 16.04 LTS, use `adt-buildvm-ubuntu-cloud` instead of `autopkgtest-buildvm-ubuntu-cloud` (the latter replaced the former in 18.04): $ adt-buildvm-ubuntu-cloud -r xenial $ mv adt--amd64-cloud.img ubuntu--64.img #### Downloading spread VM images Alternatively, instead of building the QEMU images manually, you can download pre-built and somewhat maintained images from [spread.zygoon.pl](https://spread.zygoon.pl/). The images will need to be extracted with `gunzip` and placed into `~/.spread/qemu` as above. > An image for Ubuntu Core 20 that is pre-built for KVM can be downloaded from [here](https://cdimage.ubuntu.com/ubuntu-core/20/stable/current/ubuntu-core-20-amd64.img.xz). #### Running spread For regular development work, the integration tests will be run with a prebuilt test variant of the snapd snap. The build happens automatically when starting the tests using `run-spread` helper like so: $ ./run-spread Make sure you set up snapcraft following the [snapcraft build section](#building-the-snap-with-snapcraft). The test variant of the snapd snap may be built manually by invoking a helper script: $ ./tests/build-test-snapd-snap The artifact will be placed under `$PWD/built-snap`. On occasion, when working on a test and it is known that the snapd snap need not be rebuilt, the tests may be invoked with `NO_REBUILD=1` like so: $ NO_REBUILD=1 ./run-spread #### Running spread with QEMU Finally, you can run the spread tests for Ubuntu 18.04 LTS 64-bit with: $ ./run-spread -v qemu:ubuntu-18.04-64 >To run for a different system, replace `ubuntu-18.04-64` with a different system name, which should be a basename of the [built](#building-spread-vm-images) or [downloaded](#downloading-spread-vm-images) Ubuntu image file. For quick reuse you can use: $ ./run-spread -reuse qemu:ubuntu-18.04-64 It will print how to reuse the systems. Make sure to use `export REUSE_PROJECT=1` in your environment too. > Spread tests can be exercised on Ubuntu Core 20, but need UEFI. UEFI support with QEMU backend of spread requires a BIOS from the [OVMF](https://wiki.ubuntu.com/UEFI/OVMF) package, which can be installed with `sudo apt install ovmf`. ### Testing the snapd daemon To test the `snapd` REST API daemon on a snappy system you need to transfer it to the snappy system and then run: sudo systemctl stop snapd.service snapd.socket sudo SNAPD_DEBUG=1 SNAPD_DEBUG_HTTP=3 ./snapd To debug interaction with the snap store, you can set `SNAPD_DEBUG_HTTP`. It is a bitfield: dump requests: 1, dump responses: 2, dump bodies: 4. Similarly, to debug the interaction between the `snap` command-line tool and the snapd REST API, you can set `SNAP_CLIENT_DEBUG_HTTP`. It is also a bitfield, with the same values and behaviour as `SNAPD_DEBUG_HTTP`. > In case you get some security profiles errors, when trying to install or refresh a snap, maybe you need to replace system installed snap-seccomp with the one aligned to the snapd that you are testing. To do this, simply backup `/usr/lib/snapd/snap-seccomp` and overwrite it with the testing one. Don't forget to roll back to the original, after you finish testing. ### Testing the snap userd agent To test the `snap userd --agent` command, you must first stop the current process, if it is running, and then stop the dbus activation part. To do so, just run: systemctl --user disable snapd.session-agent.socket systemctl --user stop snapd.session-agent.socket After that, it's now possible to launch the daemon with `snapd userd --agent` from a command line. To re-enable the dbus activation, kill that process and run: systemctl --user enable snapd.session-agent.socket ### Running nested tests Nested tests are used to validate features that cannot be tested with the regular tests. The nested test suites work differently from the other test suites in snapd. In this case each test runs in a new image which is created following the rules defined for the test. The nested tests are executed using the [spread framework](#downloading-spread-framework). See the following examples using the QEMU and Google backends. - _QEMU_: `spread qemu-nested:ubuntu-20.04-64:tests/nested/core20/tpm` - _Google_: `spread google-nested:ubuntu-20.04-64:tests/nested/core20/tpm` The nested system in all the cases is selected based on the host system. The following lines show the relation between host and nested `systemd` (same applies to the classic nested tests): - ubuntu-16.04-64 => ubuntu-core-16-64 - ubuntu-18.04-64 => ubuntu-core-18-64 - ubuntu-20.04-64 => ubuntu-core-20-64 The tools used for creating and hosting the nested VMs are: - _ubuntu-image snap_ is used to build the images - _QEMU_ is used for the virtualization (with [_KVM_](https://www.linux-kvm.org/page/Main_Page) acceleration) Nested test suite is composed by the following 4 suites: - _classic_: the nested suite contains an image of a classic system downloaded from cloud-images.ubuntu.com - _core_: it tests a core nested system, and the images are generated with _ubuntu-image snap_ - _core20_: this is similar to the _core_ suite, but these tests are focused on UC20 - _manual_: tests on this suite create a non generic image with specific conditions The nested suites use some environment variables to configure the suite and the tests inside it. The most important ones are described below: - `NESTED_WORK_DIR`: path to the directory where all the nested assets and images are stored - `NESTED_TYPE`: use core for Ubuntu Core nested systems or classic instead. - `NESTED_CORE_CHANNEL`: the images are created using _ubuntu-image snap_, use it to define the default branch - `NESTED_CORE_REFRESH_CHANNEL`: the images can be refreshed to a specific channel; use it to specify the channel - `NESTED_USE_CLOUD_INIT`: use cloud init to make initial system configuration instead of user assertion - `NESTED_ENABLE_KVM`: enable KVM in the QEMU command line - `NESTED_ENABLE_TPM`: re-boot in the nested VM in case it is supported (just supported on UC20) - `NESTED_ENABLE_SECURE_BOOT`: enable secure boot in the nested VM in case it is supported (supported just on UC20) - `NESTED_BUILD_SNAPD_FROM_CURRENT`: build and use either core or `snapd` from the current branch - `NESTED_CUSTOM_IMAGE_URL`: download and use an custom image from this URL - `NESTED_SNAPD_DEBUG_TO_SERIAL`: add snapd debug and log to nested vm serial console - `NESTED_EXTRA_CMDLINE`: add any extra cmd line parameter to the nested vm # Quick intro to hacking on snap-confine Hey, welcome to the nice, low-level world of snap-confine ## Building the code locally To get started from a pristine tree you want to do this: ``` ./mkversion.sh cd cmd/ autoreconf -i -f ./configure --prefix=/usr --libexecdir=/usr/lib/snapd --enable-nvidia-multiarch --with-host-arch-triplet="$(dpkg-architecture -qDEB_HOST_MULTIARCH)" ``` This will drop makefiles and let you build stuff. You may find the `make hack` target, available in [./cmd/](./cmd/) handy `(cd cmd; make hack)`. It installs the locally built version on your system and reloads the [AppArmor](https://apparmor.net/) profile. >The above configure options assume you are on Ubuntu and are generally necessary to run/test graphical applications with your local version of snap-confine. The `--with-host-arch-triplet` option sets your specific architecture and `--enable-nvidia-multiarch` allows the host's graphics drivers and libraries to be shared with snaps. If you are on a distro other than Ubuntu, try `--enable-nvidia-biarch` (though you'll likely need to add further system-specific options too). ## Testing your changes locally After building the code locally as explained in the previous section, you can run the test suite available for snap-confine (among other low-level tools) by running the `make check` target available in [./cmd]((./cmd/)). ## Submitting patches Please run `(cd cmd; make fmt)` before sending your patches for the "C" part of the source code.