# ------------------------------------------------------------------
# This is an example configuration, please modify it
# ------------------------------------------------------------------
---
pred_bat:
  module: predbat
  class: PredBat

  # Sets the prefix for all created entities in HA - only change if you want to run more than once instance
  prefix: predbat

  # Timezone to work in
  timezone: Europe/London

  # XXX: Template - You must delete the following line once you have configured your inverter
  template: True

  # Currency, symbol for main currency second symbol for 1/100s e.g. $ c or £ p or e c
  currency_symbols:
   - '£'
   - 'p'

  # Number of threads to use in plan calculation
  # Can be auto for automatic, 0 for off or values 1-N for a fixed number
  threads: auto

  # If you are using Predbat outside of HA then set the HA URL and Key (long lived access token here)
  #ha_url: 'http://homeassistant.local:8123'
  #ha_key: 'xxx'

  # Sets the maximum period of zero load before the gap is filled, default 30 minutes
  # To disable set it to 1440
  load_filter_threshold: 30

  #
  # Sensors, more than one can be specified and they will be summed up automatically
  #
  # For two inverters the load today would normally be the master load sensor only (to cover the entire house)
  # If you have three phase and one inverter per phase then you would need three load sensors
  #
  # For pv_today if you have multiple solar inverter inputs then you should include one entry for each inverter
  #
  load_today:
    - sensor.lux_home_consumption_daily
  import_today:
    - sensor.lux_power_from_grid_daily
  export_today:
    - sensor.lux_power_to_grid_daily
  pv_today:
    - sensor.lux_solar_output_daily

  # Load forecast can be used to add to the historical load data (heat-pump)
  # To link to Predheat
  # Data must be in the format of 'last_updated' timestamp and 'energy' for incrementing kWh
  #load_forecast:
  #  - predheat.heat_energy$external
  #
  # Controls/status - must by 1 per inverter
  #
  num_inverters: 1
  inverter_type: LuxPower
  inverter:
    name: "LuxPower"
    has_rest_api: False
    has_mqtt_api: False
    has_service_api: True
    output_charge_control: "current"
    current_dp: 0
    has_charge_enable_time: False
    has_discharge_enable_time: False
    has_target_soc: True
    has_reserve_soc: False
    has_timed_pause: False
    charge_time_format: "HH:MM:SS"
    charge_time_entity_is_option: False
    soc_units: "%"
    num_load_entities: 1
    has_ge_inverter_mode: False
    time_button_press: False
    clock_time_format: "%Y-%m-%d %H:%M:%S"
    write_and_poll_sleep: 10
    has_time_window: False
    support_charge_freeze: False
    support_discharge_freeze: False

  charge_start_service:
    service: switch.turn_on
    entity_id: "switch.lux_ac_charge_enable"
  charge_stop_service:
    service: switch.turn_off
    entity_id: "switch.lux_ac_charge_enable"
  discharge_start_service:
    service: switch.turn_on
    entity_id: "switch.lux_force_discharge_enable"
  discharge_stop_service:
    service: switch.turn_off
    entity_id: "switch.lux_force_discharge_enable"

  #
  # Run balance inverters every N seconds (0=disabled) - only for multi-inverter
  balance_inverters_seconds: 60
  #

  # When enabled automatic restart will restart the add-on if communication fails
  # Example below is auto-restart for GivTCP add-on itself
  #auto_restart:
  #  - shell: 'rm -rf /homeassistant/GivTCP/*.pkl'
  #  - service: hassio/addon_restart
  #    addon: a6a2857d_givtcp

  #  Example on how to restart the inverter via GivTCP
  #  - service: switch.turn_on
  #    entity_id: switch.givtcp_{geserial}_reboot_invertor

  # If not using REST then instead set the Control here (one for each inverter)
  # You should keep this section even when using REST as a fallback if it fails and for charge curve calculations
  timed_charge_current:
    - number.lux_charge_current_limit
  timed_discharge_current:
    - number.lux_discharge_current_limit
  # charge_rate:
  #   - input_number.lux_target_charge_current_w
  # discharge_rate:
  #   - input_number.lux_target_discharge_current_w
  battery_power:
    - sensor.lux_battery_discharge_live
  pv_power:
    - sensor.lux_solar_output_live
  load_power:
    - sensor.lux_home_consumption_live
  soc_percent:
    - sensor.lux_battery
  # soc_kw:
  #   - sensor.givtcp_{geserial}_soc_kwh
  #   - sensor.givtcp2_{geserial2}_soc_kwh
  soc_max:
    - 9.5
  battery_rate_max:
    - 5130
  battery_min_soc:
    - 5
  battery_voltage:
    - sensor.lux_battery_voltage_live
  #   - sensor.givtcp_{geserial}_battery_capacity_kwh
  #   - sensor.givtcp2_{geserial2}_battery_capacity_kwh
  # reserve:
  #   - number.givtcp_{geserial}_battery_power_reserve
  #   - number.givtcp2_{geserial2}_battery_power_reserve
  # inverter_mode:
  #   - select.givtcp_{geserial}_mode
  #   - select.givtcp2_{geserial2}_mode
  # inverter_time:
  #   - sensor.givtcp_{geserial}_invertor_time
  #   - sensor.givtcp2_{geserial2}_invertor_time
  charge_start_time:
    - input_text.lux_batpred_charge_start
  charge_end_time:
    - input_text.lux_batpred_charge_end
  charge_limit:
    - number.lux_ac_battery_charge_level
  scheduled_charge_enable:
    - switch.lux_ac_charge_enable
  scheduled_discharge_enable:
    - switch.lux_force_discharge_enable
  discharge_start_time:
    - input_text.lux_batpred_discharge_start
  discharge_end_time:
    - input_text.lux_batpred_discharge_end

  # Pause mode is not supported by all firmware's and will be ignored if not present
  # pause_mode:
  #  - select.givtcp_{geserial}_battery_pause_mode
  #  - select.givtcp_{geserial2}_battery_pause_mode

  # Not all firmwares support pause start/end time, delete these if not supported
  # to avoid spurious writes/warnings
  # pause_start_time:
  #  - select.givtcp_{geserial}_battery_pause_start_time_slot
  #  - select.givtcp2_{geserial2}_battery_pause_start_time_slot
  # pause_end_time:
  #  - select.givtcp_{geserial}_battery_pause_end_time_slot
  #  - select.givtcp2_{geserial2}_battery_pause_end_time_slot

  # Inverter max AC limit (one per inverter). E.g for a 3.6kw inverter set to 3600
  # If you have a second inverter for PV only please add the two values together
  inverter_limit:
    - 7500

  # Export limit is a software limit set on your inverter that prevents exporting above a given level
  # When enabled Predbat will model this limit
  #export_limit:
  # - 3600
  # - 3600

  # Some inverters don't turn off when the rate is set to 0, still charge or discharge at around 200w
  # The value can be set here in watts to model this (doesn't change operation)
  #inverter_battery_rate_min:
  #  - 200

  # Workaround to limit the maximum reserve setting, some inverters won't allow 100% to be set
  # Comment out if your inverter allows 100%
  # inverter_reserve_max : 98

  # Some batteries tail off their charge rate at high soc%
  # enter the charging curve here as a % of the max charge rate for each soc percentage.
  # the default is 1.0 (full power)
  # The example below is from GE 9.5kwh battery with latest firmware and gen1 inverter
  #
  # Predbat can compute this curve automatically if you have enough data, restart the add-on and look in the logfile for the data
  # once set here Predbat will no longer re-compute the curve.
  # Can also be set to 'auto' to just use the calculation curve, not recommended if you are using low power charging mode.
  battery_charge_power_curve:
    97 : 0.5
    98 : 0.2
    99 : 0.1
  #battery_discharge_power_curve:
  #  4 : 1.0

  # Inverter clock skew in minutes, e.g. 1 means it's 1 minute fast and -1 is 1 minute slow
  # Separate start and end options are applied to the start and end time windows, mostly as you want to start late (not early) and finish early (not late)
  # Separate discharge skew for discharge windows only
  inverter_clock_skew_start: 0
  inverter_clock_skew_end: 0
  inverter_clock_skew_discharge_start: 0
  inverter_clock_skew_discharge_end: 0

  # Clock skew adjusts the Appdaemon time
  # This is the time that Predbat takes actions like starting discharge/charging
  # Only use this for workarounds if your inverter time is correct but Predbat is somehow wrong (AppDaemon issue)
  # 1 means add 1 minute to AppDaemon time, -1 takes it away
  clock_skew: 0

  # Solcast cloud interface, set this or the local interface below
  #solcast_host: 'https://api.solcast.com.au/'
  #solcast_api_key: 'xxxx'
  #solcast_poll_hours: 8

  # Set these to match solcast sensor names if not using the cloud interface
  # The regular expression (re:) makes the solcast bit optional
  # If these don't match find your own names in Home Assistant
  pv_forecast_today: re:(sensor.(solcast_|)(pv_forecast_|)forecast_today)
  pv_forecast_tomorrow: re:(sensor.(solcast_|)(pv_forecast_|)forecast_tomorrow)
  pv_forecast_d3: re:(sensor.(solcast_|)(pv_forecast_|)forecast_(day_3|d3))
  pv_forecast_d4: re:(sensor.(solcast_|)(pv_forecast_|)forecast_(day_4|d4))

  # car_charging_energy defines an incrementing sensor which measures the charge added to your car
  # is used for car_charging_hold feature to filter out car charging from the previous load data
  # Automatically set to detect Wallbox and Zappi, if it doesn't match manually enter your sensor name
  # Also adjust car_charging_energy_scale if it's not in kwH to fix the units
  # car_charging_energy: 're:(sensor.myenergi_zappi_[0-9a-z]+_charge_added_session|sensor.wallbox_portal_added_energy)'

  # Defines the number of cars modelled by the system, set to 0 for no car
  num_cars: 0

  # car_charging_planned is set to a sensor which when positive indicates the car will charged in the upcoming low rate slots
  # This should not be needed if you use Intelligent Octopus slots which will take priority if enabled
  # The list of possible values is in car_charging_planned_response
  # Auto matches Zappi and Wallbox, or change it for your own
  # One entry per car
  # car_charging_planned:
  #   - 're:(sensor.wallbox_portal_status_description|sensor.myenergi_zappi_[0-9a-z]+_plug_status)'

  # car_charging_planned_response:
  #   - 'yes'
  #   - 'on'
  #   - 'true'
  #   - 'connected'
  #   - 'ev connected'
  #   - 'charging'
  #   - 'paused'
  #   - 'waiting for car demand'
  #   - 'waiting for ev'
  #   - 'scheduled'
  #   - 'enabled'
  #   - 'latched'
  #   - 'locked'
  #   - 'plugged in'

  # In some cases car planning is difficult (e.g. Ohme with Intelligent doesn't report slots)
  # The car charging now can be set to a sensor to indicate the car is charging and to plan
  # for it to charge during this 30 minute slot
  #car_charging_now:
  #  - off

  # Positive responses for car_charging_now
  # car_charging_now_response:
  #   - 'yes'
  #   - 'on'
  #   - 'true'

  # To make planned car charging more accurate, either using car_charging_planned or the Octopus Energy plugin,
  # specify your battery size in kwh, charge limit % and current car battery soc % sensors/values.
  # If you have Intelligent Octopus the battery size and limit will be extracted from the Octopus Energy plugin directly.
  # Set the car SOC% if you have it to give an accurate forecast of the cars battery levels.
  # One entry per car if you have multiple cars.
  #car_charging_battery_size:
  #  - 75
  #car_charging_limit:
  #  - 're:number.tsunami_charge_limit'
  #car_charging_soc:
  #  - 're:sensor.tsunami_battery'

  # One per car, when true only one car can charge at once, when False multiple cars can charge at once
  #car_charging_exclusive:
  #  - True

  # If you have Octopus intelligent, enable the intelligent slot information to add to pricing
  # Will automatically disable if not found, or comment out to disable fully
  # When enabled it overrides the 'car_charging_planned' feature and predict the car charging based on the intelligent plan (unless octopus intelligent charging is False)
  # This matches either the intelligent slot from the Octopus Plugin or from the Intelligent plugin
  octopus_intelligent_slot: 're:(binary_sensor.octopus_energy([0-9a-z_]+|)_intelligent_dispatching)'
  octopus_ready_time: 're:(time.octopus_energy_([0-9a-z_]+|)_intelligent_target_time)'
  octopus_charge_limit: 're:(number.octopus_energy([0-9a-z_]+|)_intelligent_charge_limit)'
  # Example alternative configuration for Ohme integration release >=v0.6.1
  #octopus_intelligent_slot: 'binary_sensor.ohme_slot_active'
  #octopus_ready_time: 'time.ohme_target_time'
  #octopus_charge_limit: 'number.ohme_target_percent'

  # Carbon Intensity data from National grid
  carbon_intensity: 're:(sensor.carbon_intensity_uk)'

  # Octopus saving session points to the saving session Sensor in the Octopus plugin, when enabled saving sessions will be at the assumed
  # Rate is read automatically from the add-in and converted to pence using the conversion rate below (default is 8)
  octopus_saving_session: 're:(binary_sensor.octopus_energy([0-9a-z_]+|)_saving_session(s|))'
  octopus_saving_session_octopoints_per_penny: 8

  # Energy rates
  # Please set one of these three, if multiple are set then Octopus is used first, second rates_import/rates_export and latest basic metric

  # Set import and export entity to point to the Octopus Energy plugin import and export sensors
  # automatically matches your meter number assuming you have only one (no need to edit the below)
  # Will be ignored if you don't have the sensor but will error if you do have one and it's incorrect
  # NOTE: To get detailed energy rates you need to go in and manually enable the following events in HA
  #       event.octopus_energy_electricity_xxxxxxxx_previous_day_rates
  #       event.octopus_energy_electricity_xxxxxxxx_current_day_rates
  #       event.octopus_energy_electricity_xxxxxxxx_next_day_rates
  # and if you have export enable:
  #       event.octopus_energy_electricity_xxxxxxxx_export_previous_day_rates
  #       event.octopus_energy_electricity_xxxxxxxx_export_current_day_rates
  #       event.octopus_energy_electricity_xxxxxxxx_export_next_day_rates
  # Predbat will automatically find the event. entities from the link below to the sensors
  metric_octopus_import: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_current_rate)'
  metric_octopus_export: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_export_current_rate)'

  # Standing charge in pounds, can be set to a sensor or manually entered (e.g. 0.50 is 50p)
  # The default below will pick up the standing charge from the Octopus Plugin
  # The standing charge only impacts the cost graphs and doesn't change the way Predbat plans
  # If you don't want to show the standing charge then just delete this line or set to zero
  metric_standing_charge: 're:(sensor.(octopus_energy_|)electricity_[0-9a-z]+_[0-9a-z]+_current_standing_charge)'

  # Or set your actual rates across time for import and export
  # If start/end is missing it's assumed to be a fixed rate
  # Gaps are filled with zero rate
  #rates_import:
  #  -  start: "00:30:00"
  #     end: "04:30:00"
  #     rate: 7.5
  #  -  start: "04:30:00"
  #     end: "00:30:00"
  #     rate: 40.0
  #
  #rates_export:
  #  -  rate: 4.2

  # Can be used instead of the plugin to get import rates directly online
  # Overrides metric_octopus_import and rates_import
  # rates_import_octopus_url : "https://api.octopus.energy/v1/products/FLUX-IMPORT-23-02-14/electricity-tariffs/E-1R-FLUX-IMPORT-23-02-14-G/standard-unit-rates"
  # rates_import_octopus_url : "https://api.octopus.energy/v1/products/AGILE-FLEX-BB-23-02-08/electricity-tariffs/E-1R-AGILE-FLEX-BB-23-02-08-A/standard-unit-rates"

  # Overrides metric_octopus_export and rates_export
  # rates_export_octopus_url: "https://api.octopus.energy/v1/products/FLUX-EXPORT-23-02-14/electricity-tariffs/E-1R-FLUX-EXPORT-23-02-14-G/standard-unit-rates"
  # rates_export_octopus_url: "https://api.octopus.energy/v1/products/AGILE-OUTGOING-BB-23-02-28/electricity-tariffs/E-1R-AGILE-OUTGOING-BB-23-02-28-A/standard-unit-rates/"
  # rates_export_octopus_url: "https://api.octopus.energy/v1/products/OUTGOING-FIX-12M-BB-23-02-09/electricity-tariffs/E-1R-OUTGOING-FIX-12M-BB-23-02-09-A/standard-unit-rates/"

  # Import rates can be overridden with rate_import_override
  # Export rates can be overridden with rate_export_override
  # Use the same format as above, but a date can be included if it just applies for a set day (e.g. Octopus power ups)
  # This will override even the Octopus plugin rates if enabled
  #
  #rates_import_override:
  # -  date: '2023-09-10'
  #    start: '14:00:00'
  #    end: '14:30:00'
  #    rate: 112
  #    load_scaling: 0.8

  # For pv estimate, leave blank for central estimate, or add 10 for 10% curve (worst case) or 90 or 90% curve (best case)
  # If you use 10 then disable pv_metric10_weight below
  # pv_estimate: 10

  # Days previous is the number of days back to find historical load data
  # Recommended is 7 to capture day of the week but 1 can also be used
  # if you have more history you could use 7 and 14 (in a list) but the standard data in HA only lasts 10 days
  days_previous:
    - 7

  # Days previous weight can be used to control the weighting of the previous load points, the values are multiplied by their
  # weights and then divided through by the total weight. E.g. if you used 1 and 0.5 then the first value would have 2/3rd of the weight and the second 1/3rd
  # Include one value for each days_previous value, each weighting on a separate line.
  # If any days_previous's that are not given a weighting they will assume a default weighting of 1.
  days_previous_weight:
    - 1

  # Number of hours forward to forecast, best left as-is unless you have specific reason
  forecast_hours: 48

  # Specify the devices that notifies are sent to, the default is 'notify' which goes to all
  #notify_devices:
  #  - mobile_app_treforsiphone12_2

  # Battery scaling makes the battery smaller (e.g. 0.9) or bigger than its reported
  # If you have an 80% DoD battery that falsely reports it's kwh then set it to 0.8 to report the real figures
  # One per inverter
  battery_scaling:
    - 1.0

  # Can be used to scale import and export data, used for workarounds
  import_export_scaling: 1.0

  # Export triggers:
  # For each trigger give a name, the minutes of export needed and the energy required in that time
  # Multiple triggers can be set at once so in total you could use too much energy if all run
  # Creates an entity called 'binary_sensor.predbat_export_trigger_<name>' which will be turned On when the condition is valid
  # connect this to your automation to start whatever you want to trigger
  export_triggers:
     - name: 'large'
       minutes: 60
       energy: 1.0
     - name: 'small'
       minutes: 15
       energy: 0.25

  # If you have a sensor that gives the energy consumed by your solar diverter then add it here
  # this will make the predictions more accurate. It should be an incrementing sensor, it can reset at midnight or not
  # It's assumed to be in Kwh but scaling can be applied if need be
  #iboost_energy_today: 'sensor.xxxxx'
  #iboost_energy_scaling: 1.0
  # Gas rates for comparison
  # metric_octopus_gas: 're:(sensor.(octopus_energy_|)gas_[0-9a-z]+_[0-9a-z]+_current_rate)'

  # Nordpool market energy rates
  #futurerate_url: 'https://www.nordpoolgroup.com/api/marketdata/page/325?currency=GBP'
  #futurerate_adjust_import: True
  #futurerate_adjust_export: False
  #futurerate_peak_start: "16:00:00"
  #futurerate_peak_end: "19:00:00"
  #futurerate_peak_premium_import: 14
  #futurerate_peak_premium_export: 6.5

  # Watch list, a list of sensors to watch for changes and then update the plan if they change
  # This is useful for things like the Octopus Intelligent Slot sensor so that the plan update as soon as you plugin in
  # Only uncomment the items you actually have set up above in apps.yaml, of course you can add your own as well
  # Note those using +[] are lists that are appended to this list, whereas {} items are single items only
  #watch_list:
  #  - '{octopus_intelligent_slot}'
  #  - '{octopus_ready_time}'
  #  - '{octopus_charge_limit}'
  #  - '{octopus_saving_session}'
  #  - '+[car_charging_planned]'
  #  - '+[car_charging_soc]'
  #  - '{car_charging_now}'