步驟如下：
$ cd
$ git clone https://github.com/vdudouyt/stm8flash.git
$ vim Makefile +69
install:
#mkdir -p $(DESTDIR)/usr/local/bin/
#cp $(BIN)$(BIN_SUFFIX) $(DESTDIR)/usr/local/bin/
mkdir -p $(PREFIX)/bin/
cp $(BIN)$(BIN_SUFFIX) $(PREFIX)/bin/
$ make
$ make install
$ stm8flash
Usage: stm8flash [-c programmer] [-p partno] [-s memtype] [-b bytes] [-r|-w|-v]
Options:
-? Display this help
-c programmer Specify programmer used (stlink, stlinkv2 or espstlink)
-d port Specify the serial device for espstlink (default: /dev/ttyUSB0)
-p partno Specify STM8 device
-l List supported STM8 devices
-s memtype Specify memory type (flash, eeprom, ram, opt or explicit address)
-b bytes Specify number of bytes
-r Read data from device to file
-w Write data from file to device
-v Verify data in device against file
-V Print Date(YearMonthDay-Version) and Version format is IE: 20171204-1.0
-u Unlock. Reset option bytes to factory default to remove write protection.