# UDEV Rules for OnlyKey, https://docs.crp.to/linux.html # # This file must be placed at: # # /etc/udev/rules.d/49-onlykey.rules (preferred location) # or # /lib/udev/rules.d/49-onlykey.rules (req'd on some broken systems) # # To install, type this command in a terminal: # sudo cp 49-onlykey.rules /etc/udev/rules.d/49-onlykey.rules # # After this file is installed, physically unplug and reconnect OnlyKey. # # OnlyKey ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="60fc", ENV{ID_MM_DEVICE_IGNORE}="1" ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="60fc", ENV{MTP_NO_PROBE}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="60fc", MODE:="0666" KERNEL=="ttyACM*", ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="60fc", MODE:="0666" # # If you share your linux system with other users, or just don't like the # idea of write permission for everybody, you can replace MODE:="0666" with # OWNER:="yourusername" to create the device owned by you, or with # GROUP:="somegroupname" and mange access using standard unix groups. # # Using the OnlyKey CLI (https://docs.crp.to/command-line.html) settings on OnlyKey # may be set automatically. This is helpul for things like setting keyboard layout # "onlykey-cli keylayout " or set time on OnlyKey for TOTP use "onlykey-cli settime". # For example, adding the following will automatically set the current time on OnlyKey every # time device is plugged in: # # SUBSYSTEMS=="usb", ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="60fc", MODE:="0660", GROUP:="onlykey", RUN+="/usr/local/bin/onlykey-cli settime" # KERNEL=="ttyACM*", ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="60fc", MODE:="0660", GROUP:="onlykey", RUN+="/usr/local/bin/onlykey-cli settime" #