(kicad_pcb (version 20171130) (host pcbnew "(5.1.5-0-10_14)")

  (general
    (thickness 1.6)
    (drawings 19)
    (tracks 77)
    (zones 0)
    (modules 25)
    (nets 23)
  )

  (page A4)
  (layers
    (0 F.Cu signal)
    (31 B.Cu signal)
    (32 B.Adhes user)
    (33 F.Adhes user)
    (34 B.Paste user)
    (35 F.Paste user)
    (36 B.SilkS user)
    (37 F.SilkS user)
    (38 B.Mask user)
    (39 F.Mask user)
    (40 Dwgs.User user)
    (41 Cmts.User user)
    (42 Eco1.User user)
    (43 Eco2.User user)
    (44 Edge.Cuts user)
    (45 Margin user)
    (46 B.CrtYd user)
    (47 F.CrtYd user)
    (48 B.Fab user)
    (49 F.Fab user)
  )

  (setup
    (last_trace_width 0.25)
    (trace_clearance 0.2)
    (zone_clearance 0.508)
    (zone_45_only no)
    (trace_min 0.2)
    (via_size 0.8)
    (via_drill 0.4)
    (via_min_size 0.4)
    (via_min_drill 0.3)
    (uvia_size 0.3)
    (uvia_drill 0.1)
    (uvias_allowed no)
    (uvia_min_size 0.2)
    (uvia_min_drill 0.1)
    (edge_width 0.05)
    (segment_width 0.2)
    (pcb_text_width 0.3)
    (pcb_text_size 1.5 1.5)
    (mod_edge_width 0.12)
    (mod_text_size 1 1)
    (mod_text_width 0.15)
    (pad_size 1.524 1.524)
    (pad_drill 0.762)
    (pad_to_mask_clearance 0.051)
    (solder_mask_min_width 0.25)
    (aux_axis_origin 114.3 65.405)
    (visible_elements FFFFEF7F)
    (pcbplotparams
      (layerselection 0x010fc_ffffffff)
      (usegerberextensions false)
      (usegerberattributes false)
      (usegerberadvancedattributes false)
      (creategerberjobfile false)
      (excludeedgelayer true)
      (linewidth 0.100000)
      (plotframeref false)
      (viasonmask false)
      (mode 1)
      (useauxorigin false)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.000000)
      (psnegative false)
      (psa4output false)
      (plotreference true)
      (plotvalue true)
      (plotinvisibletext false)
      (padsonsilk false)
      (subtractmaskfromsilk false)
      (outputformat 1)
      (mirror false)
      (drillshape 1)
      (scaleselection 1)
      (outputdirectory ""))
  )

  (net 0 "")
  (net 1 "Net-(D1-Pad2)")
  (net 2 "Net-(D1-Pad1)")
  (net 3 GNDREF)
  (net 4 UART_tx)
  (net 5 UART_rx)
  (net 6 VCC_tx)
  (net 7 VCC_rx)
  (net 8 "Net-(U1-Pad4)")
  (net 9 "Net-(U1-Pad7)")
  (net 10 "Net-(U1-Pad1)")
  (net 11 "Net-(FB1-Pad2)")
  (net 12 "Net-(FB1-Pad1)")
  (net 13 "Net-(FB2-Pad2)")
  (net 14 "Net-(FB2-Pad1)")
  (net 15 "Net-(FB3-Pad1)")
  (net 16 "Net-(FB4-Pad2)")
  (net 17 "Net-(FB4-Pad1)")
  (net 18 "Net-(FB5-Pad2)")
  (net 19 "Net-(FB5-Pad1)")
  (net 20 "Net-(FB6-Pad2)")
  (net 21 "Net-(FB6-Pad1)")
  (net 22 "Net-(C1-Pad1)")

  (net_class Default "This is the default net class."
    (clearance 0.2)
    (trace_width 0.25)
    (via_dia 0.8)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
    (add_net GNDREF)
    (add_net "Net-(C1-Pad1)")
    (add_net "Net-(D1-Pad1)")
    (add_net "Net-(D1-Pad2)")
    (add_net "Net-(FB1-Pad1)")
    (add_net "Net-(FB1-Pad2)")
    (add_net "Net-(FB2-Pad1)")
    (add_net "Net-(FB2-Pad2)")
    (add_net "Net-(FB3-Pad1)")
    (add_net "Net-(FB4-Pad1)")
    (add_net "Net-(FB4-Pad2)")
    (add_net "Net-(FB5-Pad1)")
    (add_net "Net-(FB5-Pad2)")
    (add_net "Net-(FB6-Pad1)")
    (add_net "Net-(FB6-Pad2)")
    (add_net "Net-(U1-Pad1)")
    (add_net "Net-(U1-Pad4)")
    (add_net "Net-(U1-Pad7)")
    (add_net UART_rx)
    (add_net UART_tx)
    (add_net VCC_rx)
    (add_net VCC_tx)
  )

  (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5ED2AF20)
    (at 154.305 105.41)
    (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row")
    (tags "Through hole pin header THT 1x03 2.54mm single row")
    (path /5ED7BBD7)
    (fp_text reference MIDI-THROUGH (at 0 -2.33) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_01x05 (at 0 7.41) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 2.54 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1))
    (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
    (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 21 "Net-(FB6-Pad1)"))
    (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 19 "Net-(FB5-Pad1)"))
    (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 3 GNDREF))
    (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5ED2AF07)
    (at 154.305 118.11)
    (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row")
    (tags "Through hole pin header THT 1x03 2.54mm single row")
    (path /5ED7D422)
    (fp_text reference MIDI-OUT (at 0 -2.33) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_01x05 (at 0 7.41) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 2.54 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1))
    (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
    (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 14 "Net-(FB2-Pad1)"))
    (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 12 "Net-(FB1-Pad1)"))
    (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 3 GNDREF))
    (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5ED2AEEE)
    (at 154.305 92.71)
    (descr "Through hole straight pin header, 1x03, 2.54mm pitch, single row")
    (tags "Through hole pin header THT 1x03 2.54mm single row")
    (path /5ED7A90D)
    (fp_text reference MIDI-IN (at 0 -2.33) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_01x05 (at 0 7.41) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 2.54 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.8 6.85) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 6.85) (end 1.8 6.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.33 1.27) (end 1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 6.41) (end 1.33 6.41) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 6.35) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 -1.27) (end 1.27 6.35) (layer F.Fab) (width 0.1))
    (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
    (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 15 "Net-(FB3-Pad1)"))
    (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 17 "Net-(FB4-Pad1)"))
    (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 22 "Net-(C1-Pad1)"))
    (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x03_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Filou.se:filou.se.sm (layer F.Cu) (tedit 0) (tstamp 5ED40321)
    (at 143.51 101.6)
    (fp_text reference G*** (at 0 0) (layer F.SilkS) hide
      (effects (font (size 1.524 1.524) (thickness 0.3)))
    )
    (fp_text value LOGO (at 0.75 0) (layer F.SilkS) hide
      (effects (font (size 1.524 1.524) (thickness 0.3)))
    )
    (fp_poly (pts (xy -1.4605 -1.743711) (xy -1.30052 -1.593594) (xy -1.277423 -1.528213) (xy -1.299211 -1.524)
      (xy -1.368357 -1.581097) (xy -1.489711 -1.7145) (xy -1.651 -1.905) (xy -1.4605 -1.743711)) (layer F.SilkS) (width 0.01))
    (fp_poly (pts (xy 0.846667 -1.143) (xy 0.804333 -1.100667) (xy 0.762 -1.143) (xy 0.804333 -1.185333)
      (xy 0.846667 -1.143)) (layer F.SilkS) (width 0.01))
    (fp_poly (pts (xy -1.641249 -1.329032) (xy -1.524553 -1.114417) (xy -1.402935 -1.033123) (xy -1.322662 -1.032972)
      (xy -1.186677 -1.099254) (xy -1.165747 -1.26366) (xy -1.172265 -1.404673) (xy -1.118667 -1.40102)
      (xy -1.028849 -1.323961) (xy -0.895649 -1.246331) (xy -0.680134 -1.196735) (xy -0.347765 -1.168959)
      (xy -0.124082 -1.161242) (xy 0.297031 -1.139594) (xy 0.555242 -1.098772) (xy 0.655992 -1.037917)
      (xy 0.656017 -1.037843) (xy 0.723778 -0.97565) (xy 0.863714 -1.025124) (xy 0.98336 -1.075285)
      (xy 0.980238 -1.026652) (xy 0.978887 -1.024447) (xy 1.000994 -0.953331) (xy 1.14837 -0.931333)
      (xy 1.300297 -0.945232) (xy 1.30954 -1.004743) (xy 1.27 -1.058333) (xy 1.207425 -1.159589)
      (xy 1.271977 -1.18533) (xy 1.273744 -1.185334) (xy 1.342097 -1.215308) (xy 1.330045 -1.238178)
      (xy 1.346332 -1.318701) (xy 1.452936 -1.431107) (xy 1.591031 -1.527095) (xy 1.70179 -1.558358)
      (xy 1.714077 -1.553513) (xy 1.763919 -1.438487) (xy 1.77544 -1.220669) (xy 1.750764 -0.961702)
      (xy 1.692016 -0.723225) (xy 1.684794 -0.704012) (xy 1.620349 -0.469525) (xy 1.570904 -0.168497)
      (xy 1.560719 -0.064953) (xy 1.512539 0.240561) (xy 1.429288 0.5208) (xy 1.397586 0.591533)
      (xy 1.301662 0.941009) (xy 1.328431 1.325528) (xy 1.423811 1.581934) (xy 1.505841 1.7651)
      (xy 1.492324 1.874826) (xy 1.361067 1.929282) (xy 1.08988 1.946642) (xy 0.977604 1.947333)
      (xy 0.431209 1.947333) (xy 0.575438 1.693868) (xy 0.698361 1.522596) (xy 0.806996 1.440975)
      (xy 0.816441 1.439868) (xy 0.927911 1.371427) (xy 0.962353 1.311286) (xy 0.966561 1.226832)
      (xy 0.858516 1.223307) (xy 0.780911 1.240664) (xy 0.628345 1.268556) (xy 0.611415 1.229974)
      (xy 0.651323 1.175371) (xy 0.721343 1.017891) (xy 0.644689 0.915779) (xy 0.438416 0.881203)
      (xy 0.261939 0.897551) (xy 0.03911 0.943365) (xy -0.053877 1.005859) (xy -0.055836 1.116853)
      (xy -0.047774 1.151467) (xy -0.033028 1.28788) (xy -0.113984 1.33323) (xy -0.252036 1.330152)
      (xy -0.430225 1.293047) (xy -0.469728 1.204486) (xy -0.463099 1.177803) (xy -0.466079 1.02605)
      (xy -0.522789 0.813723) (xy -0.609319 0.602884) (xy -0.701764 0.455595) (xy -0.753729 0.423333)
      (xy -0.810894 0.492599) (xy -0.816093 0.5715) (xy -0.849156 0.674125) (xy -0.993539 0.728944)
      (xy -1.143 0.746491) (xy -1.349936 0.754045) (xy -1.41467 0.725612) (xy -1.375834 0.666058)
      (xy -1.28592 0.539883) (xy -1.280208 0.461341) (xy -1.355976 0.476272) (xy -1.385767 0.498677)
      (xy -1.520951 0.540962) (xy -1.623565 0.434175) (xy -1.670759 0.249003) (xy -1.185333 0.249003)
      (xy -1.137542 0.330595) (xy -1.005647 0.282222) (xy -0.818445 0.282222) (xy -0.806822 0.332556)
      (xy -0.762 0.338667) (xy -0.69231 0.307688) (xy -0.705556 0.282222) (xy -0.806035 0.272089)
      (xy -0.818445 0.282222) (xy -1.005647 0.282222) (xy -0.992264 0.277314) (xy -0.893985 0.208974)
      (xy -0.80404 0.117243) (xy -0.825488 0.084667) (xy -0.95618 0.147043) (xy -0.97452 0.170714)
      (xy -1.075989 0.219556) (xy -1.106517 0.208051) (xy -1.180246 0.220533) (xy -1.185333 0.249003)
      (xy -1.670759 0.249003) (xy -1.684011 0.197008) (xy -1.688366 0.07528) (xy -1.605924 0.07528)
      (xy -1.547144 0.039865) (xy -1.502833 0.006716) (xy -1.384792 -0.050982) (xy -1.354667 -0.016277)
      (xy -1.284103 0.033498) (xy -1.121833 0.010169) (xy -0.854724 -0.035052) (xy -0.675705 0.01778)
      (xy -0.554858 0.192068) (xy -0.46226 0.511216) (xy -0.458319 0.529167) (xy -0.437086 0.667053)
      (xy -0.433917 0.695476) (xy -0.381511 0.73284) (xy -0.278795 0.653747) (xy -0.206446 0.550333)
      (xy 0.254 0.550333) (xy 0.296333 0.592667) (xy 0.338667 0.550333) (xy 0.296333 0.508)
      (xy 0.254 0.550333) (xy -0.206446 0.550333) (xy -0.185927 0.521004) (xy -0.230246 0.413359)
      (xy -0.236462 0.407005) (xy -0.319953 0.24343) (xy 0.021999 0.24343) (xy 0.084022 0.20285)
      (xy 0.095173 0.191911) (xy 0.162049 0.080903) (xy 0.152982 0.040093) (xy 0.09 0.065501)
      (xy 0.047777 0.144515) (xy 0.021999 0.24343) (xy -0.319953 0.24343) (xy -0.320117 0.243109)
      (xy -0.338667 0.116991) (xy -0.355854 -0.042333) (xy 0.338667 -0.042333) (xy 0.381 0)
      (xy 0.423333 -0.042333) (xy 0.381 -0.084667) (xy 0.338667 -0.042333) (xy -0.355854 -0.042333)
      (xy -0.362146 -0.100652) (xy -0.391013 -0.207231) (xy -0.443085 -0.295362) (xy -0.515076 -0.247003)
      (xy -0.557654 -0.192989) (xy -0.644978 -0.091828) (xy -0.672594 -0.134855) (xy -0.675937 -0.211667)
      (xy -0.699294 -0.314977) (xy -0.744467 -0.279471) (xy -0.864908 -0.204967) (xy -1.079266 -0.151263)
      (xy -1.127098 -0.145309) (xy -1.363789 -0.09447) (xy -1.532425 -0.011911) (xy -1.548095 0.003078)
      (xy -1.605924 0.07528) (xy -1.688366 0.07528) (xy -1.694752 -0.10316) (xy -1.686339 -0.396148)
      (xy -1.686516 -0.514403) (xy -1.403257 -0.514403) (xy -1.398178 -0.42524) (xy -1.316815 -0.395972)
      (xy -1.25004 -0.465667) (xy 1.016 -0.465667) (xy 1.058333 -0.423333) (xy 1.100667 -0.465667)
      (xy 1.058333 -0.508) (xy 1.016 -0.465667) (xy -1.25004 -0.465667) (xy -1.210191 -0.507257)
      (xy -1.188514 -0.550333) (xy 0.846667 -0.550333) (xy 0.889 -0.508) (xy 0.931333 -0.550333)
      (xy 0.889 -0.592667) (xy 0.846667 -0.550333) (xy -1.188514 -0.550333) (xy -1.133547 -0.659558)
      (xy -1.13638 -0.741269) (xy -1.227853 -0.74069) (xy -1.333663 -0.644727) (xy -1.403257 -0.514403)
      (xy -1.686516 -0.514403) (xy -1.686663 -0.611583) (xy -1.698498 -0.823196) (xy -1.724617 -1.104721)
      (xy -1.737061 -1.227667) (xy -1.780174 -1.651) (xy -1.641249 -1.329032)) (layer F.SilkS) (width 0.01))
    (fp_poly (pts (xy -1.124673 1.623877) (xy -1.019334 1.777327) (xy -1.063798 1.900152) (xy -1.231378 1.947333)
      (xy -1.392137 1.914551) (xy -1.42226 1.801489) (xy -1.421878 1.799167) (xy -1.342915 1.621114)
      (xy -1.210289 1.579028) (xy -1.124673 1.623877)) (layer F.SilkS) (width 0.01))
  )

  (module MountingHole:MountingHole_2.2mm_M2 (layer F.Cu) (tedit 56D1B4CB) (tstamp 5ED33F65)
    (at 124.46 86.36)
    (descr "Mounting Hole 2.2mm, no annular, M2")
    (tags "mounting hole 2.2mm no annular m2")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.2mm_M2 (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 2.2 2.2) (drill 2.2) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.2mm_M2 (layer F.Cu) (tedit 56D1B4CB) (tstamp 5ED33F41)
    (at 157.48 86.36)
    (descr "Mounting Hole 2.2mm, no annular, M2")
    (tags "mounting hole 2.2mm no annular m2")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.2mm_M2 (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 2.2 2.2) (drill 2.2) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.2mm_M2 (layer F.Cu) (tedit 56D1B4CB) (tstamp 5ED33F0F)
    (at 157.48 128.27)
    (descr "Mounting Hole 2.2mm, no annular, M2")
    (tags "mounting hole 2.2mm no annular m2")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.2mm_M2 (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 2.2 2.2) (drill 2.2) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_2.2mm_M2 (layer F.Cu) (tedit 56D1B4CB) (tstamp 5ED33EEB)
    (at 124.46 128.27)
    (descr "Mounting Hole 2.2mm, no annular, M2")
    (tags "mounting hole 2.2mm no annular m2")
    (attr virtual)
    (fp_text reference REF** (at 0 -3.2) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_2.2mm_M2 (at 0 3.2) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 np_thru_hole circle (at 0 0) (size 2.2 2.2) (drill 2.2) (layers *.Cu *.Mask))
  )

  (module Package_DIP:DIP-8_W7.62mm_LongPads (layer F.Cu) (tedit 5A02E8C5) (tstamp 5ED2AFA2)
    (at 135.255 93.98 270)
    (descr "8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads")
    (tags "THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads")
    (path /5ED711DD)
    (fp_text reference U1 (at 3.81 -2.33 90) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 6N138 (at 3.81 9.95 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 3.81 3.81 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 9.1 -1.55) (end -1.45 -1.55) (layer F.CrtYd) (width 0.05))
    (fp_line (start 9.1 9.15) (end 9.1 -1.55) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.45 9.15) (end 9.1 9.15) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.45 -1.55) (end -1.45 9.15) (layer F.CrtYd) (width 0.05))
    (fp_line (start 6.06 -1.33) (end 4.81 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start 6.06 8.95) (end 6.06 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.56 8.95) (end 6.06 8.95) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.56 -1.33) (end 1.56 8.95) (layer F.SilkS) (width 0.12))
    (fp_line (start 2.81 -1.33) (end 1.56 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.635 -0.27) (end 1.635 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start 0.635 8.89) (end 0.635 -0.27) (layer F.Fab) (width 0.1))
    (fp_line (start 6.985 8.89) (end 0.635 8.89) (layer F.Fab) (width 0.1))
    (fp_line (start 6.985 -1.27) (end 6.985 8.89) (layer F.Fab) (width 0.1))
    (fp_line (start 1.635 -1.27) (end 6.985 -1.27) (layer F.Fab) (width 0.1))
    (fp_arc (start 3.81 -1.33) (end 2.81 -1.33) (angle -180) (layer F.SilkS) (width 0.12))
    (pad 8 thru_hole oval (at 7.62 0 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 7 VCC_rx))
    (pad 4 thru_hole oval (at 0 7.62 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 8 "Net-(U1-Pad4)"))
    (pad 7 thru_hole oval (at 7.62 2.54 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 9 "Net-(U1-Pad7)"))
    (pad 3 thru_hole oval (at 0 5.08 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 1 "Net-(D1-Pad2)"))
    (pad 6 thru_hole oval (at 7.62 5.08 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 5 UART_rx))
    (pad 2 thru_hole oval (at 0 2.54 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 2 "Net-(D1-Pad1)"))
    (pad 5 thru_hole oval (at 7.62 7.62 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 3 GNDREF))
    (pad 1 thru_hole rect (at 0 0 270) (size 2.4 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 10 "Net-(U1-Pad1)"))
    (model ${KISYS3DMOD}/Package_DIP.3dshapes/DIP-8_W7.62mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AF86)
    (at 144.5625 110.49 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED87722)
    (attr smd)
    (fp_text reference RF (at 0 -1.82) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "220 5% 0.25W" (at 0 1.82) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 5 UART_rx))
    (pad 1 smd roundrect (at -1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 20 "Net-(FB6-Pad2)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AF75)
    (at 144.5625 107.95 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED86B2A)
    (attr smd)
    (fp_text reference RE (at 0 1.905) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "220 5% 0.25W" (at 0 1.82) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 6 VCC_tx))
    (pad 1 smd roundrect (at -1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 18 "Net-(FB5-Pad2)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AF64)
    (at 130.81 106.68 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED84638)
    (attr smd)
    (fp_text reference RD (at 0 -1.82) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "220 5% 0.25W" (at 0 1.82) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 7 VCC_rx))
    (pad 1 smd roundrect (at -1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 5 UART_rx))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AF53)
    (at 144.5625 123.19 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED8713D)
    (attr smd)
    (fp_text reference RC (at 0 -1.82) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "220 5% 0.25W" (at 0 1.82) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 4 UART_tx))
    (pad 1 smd roundrect (at -1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 13 "Net-(FB2-Pad2)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AF42)
    (at 144.145 95.25 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED86183)
    (attr smd)
    (fp_text reference RB (at 0 -1.82) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "220 5% 0.25W" (at 0 1.82) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 2 "Net-(D1-Pad1)"))
    (pad 1 smd roundrect (at -1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 16 "Net-(FB4-Pad2)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AF31)
    (at 144.5625 120.015 180)
    (descr "Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED86678)
    (attr smd)
    (fp_text reference RA (at 0 1.905) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "220 5% 0.25W" (at 0 2.54) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (fp_line (start 2.45 1.12) (end -2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2.45 -1.12) (end 2.45 1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 -1.12) (end 2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2.45 1.12) (end -2.45 -1.12) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.602064 0.91) (end 0.602064 0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.602064 -0.91) (end 0.602064 -0.91) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.6 0.8) (end -1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start 1.6 -0.8) (end 1.6 0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 -0.8) (end 1.6 -0.8) (layer F.Fab) (width 0.1))
    (fp_line (start -1.6 0.8) (end -1.6 -0.8) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 6 VCC_tx))
    (pad 1 smd roundrect (at -1.4875 0 180) (size 1.425 1.75) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.175439)
      (net 11 "Net-(FB1-Pad2)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_1206_3216Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5ED2AED5)
    (at 129.54 113.03)
    (descr "Through hole straight pin header, 2x01, 2.54mm pitch, double rows")
    (tags "Through hole pin header THT 2x01 2.54mm double row")
    (path /5EDAFE45)
    (fp_text reference JP1 (at 1.27 3.175) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "VCC_rx - VCC_tx" (at 1.27 2.33) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 1.27 0 90) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 4.35 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start 4.35 1.8) (end 4.35 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 1.8) (end 4.35 1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 -1.8) (end -1.8 1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.27 -1.33) (end 3.87 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.27 1.27) (end 1.27 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end 1.27 1.27) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.87 -1.33) (end 3.87 1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end -1.33 1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.33) (end 3.87 1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.27 0) (end 0 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 1.27) (end -1.27 0) (layer F.Fab) (width 0.1))
    (fp_line (start 3.81 1.27) (end -1.27 1.27) (layer F.Fab) (width 0.1))
    (fp_line (start 3.81 -1.27) (end 3.81 1.27) (layer F.Fab) (width 0.1))
    (fp_line (start 0 -1.27) (end 3.81 -1.27) (layer F.Fab) (width 0.1))
    (pad 2 thru_hole oval (at 2.54 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 6 VCC_tx))
    (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 7 VCC_rx))
    (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x01_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 5ED2AEBD)
    (at 127.635 123.19 90)
    (descr "Through hole straight pin header, 1x05, 2.54mm pitch, single row")
    (tags "Through hole pin header THT 1x05 2.54mm single row")
    (path /5ED7C725)
    (fp_text reference H1 (at 0 -2.54 90) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value Conn_01x05 (at 0 12.49 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 5.08) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.8 11.95) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 11.95) (end 1.8 11.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.8 -1.8) (end -1.8 11.95) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.33 1.27) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 1.27) (end -1.33 11.49) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.33 11.49) (end 1.33 11.49) (layer F.SilkS) (width 0.12))
    (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 11.43) (end -1.27 -0.635) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 11.43) (end -1.27 11.43) (layer F.Fab) (width 0.1))
    (fp_line (start 1.27 -1.27) (end 1.27 11.43) (layer F.Fab) (width 0.1))
    (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1))
    (pad 5 thru_hole oval (at 0 10.16 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 4 UART_tx))
    (pad 4 thru_hole oval (at 0 7.62 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 5 UART_rx))
    (pad 3 thru_hole oval (at 0 5.08 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 3 GNDREF))
    (pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 6 VCC_tx))
    (pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask)
      (net 7 VCC_rx))
    (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x05_P2.54mm_Vertical.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AEA4)
    (at 149.86 110.49 180)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED82230)
    (attr smd)
    (fp_text reference FB6 (at 0 -1.43) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MMZ1608Y102BTA00 (at 0 1.43) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 20 "Net-(FB6-Pad2)"))
    (pad 1 smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 21 "Net-(FB6-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AE93)
    (at 149.86 107.95 180)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED835FC)
    (attr smd)
    (fp_text reference FB5 (at 0 1.27) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MMZ1608Y102BTA00 (at 0 1.43) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 18 "Net-(FB5-Pad2)"))
    (pad 1 smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 19 "Net-(FB5-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AE82)
    (at 149.86 95.25 180)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED808D1)
    (attr smd)
    (fp_text reference FB4 (at 0 1.27) (layer F.SilkS)
      (effects (font (size 0.8 0.8) (thickness 0.15)))
    )
    (fp_text value MMZ1608Y102BTA00 (at 0 1.43) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 16 "Net-(FB4-Pad2)"))
    (pad 1 smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 17 "Net-(FB4-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AE71)
    (at 149.86 97.79 180)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED81726)
    (attr smd)
    (fp_text reference FB3 (at 0 -1.43) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MMZ1608Y102BTA00 (at 0 1.43) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 1 "Net-(D1-Pad2)"))
    (pad 1 smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 15 "Net-(FB3-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AE60)
    (at 150.255 123.19 180)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED827AF)
    (attr smd)
    (fp_text reference FB2 (at 0 -1.43) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MMZ1608Y102BTA00 (at 0 1.43) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 13 "Net-(FB2-Pad2)"))
    (pad 1 smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 14 "Net-(FB2-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBD) (tstamp 5ED2AE4F)
    (at 150.255 120.65 180)
    (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "resistor handsolder")
    (path /5ED82E0B)
    (attr smd)
    (fp_text reference FB1 (at 0 1.27) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MMZ1608Y102BTA00 (at 0 1.43) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 11 "Net-(FB1-Pad2)"))
    (pad 1 smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 12 "Net-(FB1-Pad1)"))
    (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal (layer F.Cu) (tedit 5AE50CD5) (tstamp 5ED2AE3E)
    (at 140.335 90.17 180)
    (descr "Diode, DO-35_SOD27 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf")
    (tags "Diode DO-35_SOD27 series Axial Horizontal pin pitch 10.16mm  length 4mm diameter 2mm")
    (path /5ED72603)
    (fp_text reference D1 (at 5.08 0) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value 1N914 (at 5.08 2.12) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 5.38 0) (layer F.Fab)
      (effects (font (size 0.8 0.8) (thickness 0.12)))
    )
    (fp_line (start 11.21 -1.25) (end -1.05 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 11.21 1.25) (end 11.21 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.05 1.25) (end 11.21 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.05 -1.25) (end -1.05 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 3.56 -1.12) (end 3.56 1.12) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.8 -1.12) (end 3.8 1.12) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.68 -1.12) (end 3.68 1.12) (layer F.SilkS) (width 0.12))
    (fp_line (start 9.12 0) (end 7.2 0) (layer F.SilkS) (width 0.12))
    (fp_line (start 1.04 0) (end 2.96 0) (layer F.SilkS) (width 0.12))
    (fp_line (start 7.2 -1.12) (end 2.96 -1.12) (layer F.SilkS) (width 0.12))
    (fp_line (start 7.2 1.12) (end 7.2 -1.12) (layer F.SilkS) (width 0.12))
    (fp_line (start 2.96 1.12) (end 7.2 1.12) (layer F.SilkS) (width 0.12))
    (fp_line (start 2.96 -1.12) (end 2.96 1.12) (layer F.SilkS) (width 0.12))
    (fp_line (start 3.58 -1) (end 3.58 1) (layer F.Fab) (width 0.1))
    (fp_line (start 3.78 -1) (end 3.78 1) (layer F.Fab) (width 0.1))
    (fp_line (start 3.68 -1) (end 3.68 1) (layer F.Fab) (width 0.1))
    (fp_line (start 10.16 0) (end 7.08 0) (layer F.Fab) (width 0.1))
    (fp_line (start 0 0) (end 3.08 0) (layer F.Fab) (width 0.1))
    (fp_line (start 7.08 -1) (end 3.08 -1) (layer F.Fab) (width 0.1))
    (fp_line (start 7.08 1) (end 7.08 -1) (layer F.Fab) (width 0.1))
    (fp_line (start 3.08 1) (end 7.08 1) (layer F.Fab) (width 0.1))
    (fp_line (start 3.08 -1) (end 3.08 1) (layer F.Fab) (width 0.1))
    (pad 2 thru_hole oval (at 10.16 0 180) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 1 "Net-(D1-Pad2)"))
    (pad 1 thru_hole rect (at 0 0 180) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask)
      (net 2 "Net-(D1-Pad1)"))
    (model ${KISYS3DMOD}/Diode_THT.3dshapes/D_DO-35_SOD27_P10.16mm_Horizontal.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder (layer F.Cu) (tedit 5B301BBE) (tstamp 5ED2AE1F)
    (at 149.86 92.71 180)
    (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator")
    (tags "capacitor handsolder")
    (path /5ED88990)
    (attr smd)
    (fp_text reference C1 (at 0 1.905) (layer F.SilkS)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value "1 microF" (at 0 1.43) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.4 0.4) (thickness 0.06)))
    )
    (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05))
    (fp_line (start -0.171267 0.51) (end 0.171267 0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start -0.171267 -0.51) (end 0.171267 -0.51) (layer F.SilkS) (width 0.12))
    (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1))
    (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1))
    (pad 2 smd roundrect (at 0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 3 GNDREF))
    (pad 1 smd roundrect (at -0.875 0 180) (size 1.05 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25)
      (net 22 "Net-(C1-Pad1)"))
    (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (gr_text "© 2020 filou.se / MIT License" (at 140.97 128.524) (layer F.SilkS)
    (effects (font (size 0.9 0.9) (thickness 0.15)))
  )
  (dimension 39.37 (width 0.15) (layer F.Fab)
    (gr_text "39.370 mm" (at 140.97 73.63) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 121.285 83.185) (xy 121.285 74.343579)))
    (feature2 (pts (xy 160.655 83.185) (xy 160.655 74.343579)))
    (crossbar (pts (xy 160.655 74.93) (xy 121.285 74.93)))
    (arrow1a (pts (xy 121.285 74.93) (xy 122.411504 74.343579)))
    (arrow1b (pts (xy 121.285 74.93) (xy 122.411504 75.516421)))
    (arrow2a (pts (xy 160.655 74.93) (xy 159.528496 74.343579)))
    (arrow2b (pts (xy 160.655 74.93) (xy 159.528496 75.516421)))
  )
  (dimension 33.02 (width 0.15) (layer F.Fab)
    (gr_text "33.020 mm" (at 140.97 77.44) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 157.48 86.36) (xy 157.48 78.153579)))
    (feature2 (pts (xy 124.46 86.36) (xy 124.46 78.153579)))
    (crossbar (pts (xy 124.46 78.74) (xy 157.48 78.74)))
    (arrow1a (pts (xy 157.48 78.74) (xy 156.353496 79.326421)))
    (arrow1b (pts (xy 157.48 78.74) (xy 156.353496 78.153579)))
    (arrow2a (pts (xy 124.46 78.74) (xy 125.586504 79.326421)))
    (arrow2b (pts (xy 124.46 78.74) (xy 125.586504 78.153579)))
  )
  (dimension 48.26 (width 0.15) (layer F.Fab)
    (gr_text "48.260 mm" (at 171.48 107.315 270) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 160.655 131.445) (xy 170.766421 131.445)))
    (feature2 (pts (xy 160.655 83.185) (xy 170.766421 83.185)))
    (crossbar (pts (xy 170.18 83.185) (xy 170.18 131.445)))
    (arrow1a (pts (xy 170.18 131.445) (xy 169.593579 130.318496)))
    (arrow1b (pts (xy 170.18 131.445) (xy 170.766421 130.318496)))
    (arrow2a (pts (xy 170.18 83.185) (xy 169.593579 84.311504)))
    (arrow2b (pts (xy 170.18 83.185) (xy 170.766421 84.311504)))
  )
  (dimension 41.91 (width 0.15) (layer F.Fab)
    (gr_text "41.910 mm" (at 167.035 107.315 270) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (feature1 (pts (xy 157.48 128.27) (xy 166.321421 128.27)))
    (feature2 (pts (xy 157.48 86.36) (xy 166.321421 86.36)))
    (crossbar (pts (xy 165.735 86.36) (xy 165.735 128.27)))
    (arrow1a (pts (xy 165.735 128.27) (xy 165.148579 127.143496)))
    (arrow1b (pts (xy 165.735 128.27) (xy 166.321421 127.143496)))
    (arrow2a (pts (xy 165.735 86.36) (xy 165.148579 87.486504)))
    (arrow2b (pts (xy 165.735 86.36) (xy 166.321421 87.486504)))
  )
  (gr_text G (at 132.715 125.73) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (gr_text "Rx Tx" (at 136.525 125.73) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (gr_text "Vrx = Vtx" (at 130.81 118.11) (layer F.SilkS)
    (effects (font (size 0.8 0.8) (thickness 0.15)))
  )
  (gr_text "C1 optional\nbridge FB1-6 if not present" (at 138.43 108.585 90) (layer F.SilkS)
    (effects (font (size 0.8 0.8) (thickness 0.15)))
  )
  (gr_text github.com/tschiemer/midi-uart-adapter (at 123.825 105.41 90) (layer F.SilkS)
    (effects (font (size 0.9 0.9) (thickness 0.15)))
  )
  (gr_line (start 121.285 131.445) (end 121.285 83.185) (layer Edge.Cuts) (width 0.05) (tstamp 5ED34674))
  (gr_line (start 160.655 131.445) (end 121.285 131.445) (layer Edge.Cuts) (width 0.05))
  (gr_line (start 160.655 83.185) (end 160.655 131.445) (layer Edge.Cuts) (width 0.05))
  (gr_line (start 121.285 83.185) (end 160.655 83.185) (layer Edge.Cuts) (width 0.05))
  (gr_text "5  4  2\nT  R  S" (at 158.115 95.25 90) (layer F.SilkS) (tstamp 5ED34013)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (gr_text "5  4  2\nT  R  S" (at 158.115 107.95 90) (layer F.SilkS) (tstamp 5ED34011)
    (effects (font (size 1 1) (thickness 0.15)))
  )
  (gr_text "5  4  2\nT  R  S" (at 158.115 123.825 90) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)) (justify left))
  )
  (gr_text "Vrx Vtx" (at 128.905 125.73) (layer F.SilkS)
    (effects (font (size 1 0.9) (thickness 0.15)))
  )
  (gr_text "MIDI / UART Adapter v2.1" (at 141.605 85.725) (layer F.SilkS)
    (effects (font (size 1 1) (thickness 0.15)))
  )

  (segment (start 130.175 90.17) (end 130.175 93.98) (width 0.25) (layer F.Cu) (net 1))
  (segment (start 148.985 97.79) (end 148.985 98.265) (width 0.25) (layer F.Cu) (net 1))
  (segment (start 148.985 97.79) (end 140.335 97.79) (width 0.25) (layer F.Cu) (net 1))
  (segment (start 140.335 97.79) (end 140.335 97.79) (width 0.25) (layer F.Cu) (net 1) (tstamp 5ED8B630))
  (via (at 140.335 97.79) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1))
  (segment (start 130.175 95.43) (end 130.175 93.98) (width 0.25) (layer B.Cu) (net 1))
  (segment (start 132.535 97.79) (end 130.175 95.43) (width 0.25) (layer B.Cu) (net 1))
  (segment (start 140.335 97.79) (end 132.535 97.79) (width 0.25) (layer B.Cu) (net 1))
  (segment (start 142.6575 94.375) (end 142.6575 95.25) (width 0.25) (layer F.Cu) (net 2))
  (segment (start 140.335 91.22) (end 140.335 90.17) (width 0.25) (layer F.Cu) (net 2))
  (segment (start 140.335 93.64) (end 140.335 91.22) (width 0.25) (layer F.Cu) (net 2))
  (segment (start 141.945 95.25) (end 140.335 93.64) (width 0.25) (layer F.Cu) (net 2))
  (segment (start 142.6575 95.25) (end 141.945 95.25) (width 0.25) (layer F.Cu) (net 2))
  (segment (start 132.715 92.53) (end 132.715 93.98) (width 0.25) (layer B.Cu) (net 2))
  (segment (start 135.075 90.17) (end 132.715 92.53) (width 0.25) (layer B.Cu) (net 2))
  (segment (start 140.335 90.17) (end 135.075 90.17) (width 0.25) (layer B.Cu) (net 2))
  (segment (start 130.175 118.745) (end 127.635 116.205) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 127.635 101.6) (end 127.635 116.205) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 132.715 121.285) (end 130.175 118.745) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 132.715 123.19) (end 132.715 121.285) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 135.89 118.11) (end 132.715 121.285) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 154.305 118.11) (end 135.89 118.11) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 148.59 105.41) (end 154.305 105.41) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 148.985 92.71) (end 146.05 92.71) (width 0.25) (layer F.Cu) (net 3))
  (segment (start 146.05 92.71) (end 146.05 92.71) (width 0.25) (layer F.Cu) (net 3) (tstamp 5ED8B47C))
  (via (at 146.05 92.71) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 3))
  (segment (start 146.05 107.95) (end 148.59 105.41) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 146.05 92.71) (end 146.05 107.95) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 135.89 118.11) (end 146.05 107.95) (width 0.25) (layer B.Cu) (net 3))
  (segment (start 143.075 123.19) (end 137.795 123.19) (width 0.25) (layer F.Cu) (net 4))
  (segment (start 132.2975 106.68) (end 132.2975 107.555) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 134.6425 109.855) (end 134.62 109.8775) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 130.175 103.05) (end 132.2975 105.1725) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 132.2975 105.1725) (end 132.2975 106.68) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 130.175 101.6) (end 130.175 103.05) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 135.2325 110.49) (end 134.60875 109.86625) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 143.075 110.49) (end 135.2325 110.49) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 134.60875 109.86625) (end 134.62 109.8775) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 132.2975 107.555) (end 134.60875 109.86625) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 135.255 110.5125) (end 135.2325 110.49) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 135.255 123.19) (end 135.255 110.5125) (width 0.25) (layer F.Cu) (net 5))
  (segment (start 132.08 121.285) (end 130.175 123.19) (width 0.25) (layer F.Cu) (net 6))
  (segment (start 132.08 113.03) (end 132.08 121.285) (width 0.25) (layer F.Cu) (net 6))
  (segment (start 143.075 107.95) (end 140.97 107.95) (width 0.25) (layer F.Cu) (net 6))
  (segment (start 140.97 107.95) (end 140.97 107.95) (width 0.25) (layer F.Cu) (net 6) (tstamp 5ED8AA22))
  (via (at 140.97 107.95) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 6))
  (segment (start 135.89 113.03) (end 132.08 113.03) (width 0.25) (layer B.Cu) (net 6))
  (segment (start 140.97 107.95) (end 136.525 112.395) (width 0.25) (layer B.Cu) (net 6))
  (segment (start 136.525 112.395) (end 135.89 113.03) (width 0.25) (layer B.Cu) (net 6) (tstamp 5ED8AA58))
  (via (at 136.525 112.395) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 6))
  (segment (start 136.525 112.960685) (end 136.525 112.395) (width 0.25) (layer F.Cu) (net 6))
  (segment (start 136.525 114.1775) (end 136.525 112.960685) (width 0.25) (layer F.Cu) (net 6))
  (segment (start 142.3625 120.015) (end 136.525 114.1775) (width 0.25) (layer F.Cu) (net 6))
  (segment (start 143.075 120.015) (end 142.3625 120.015) (width 0.25) (layer F.Cu) (net 6))
  (segment (start 129.54 106.8975) (end 129.3225 106.68) (width 0.25) (layer F.Cu) (net 7))
  (segment (start 129.54 113.03) (end 129.54 106.8975) (width 0.25) (layer F.Cu) (net 7))
  (segment (start 129.54 121.285) (end 127.635 123.19) (width 0.25) (layer F.Cu) (net 7))
  (segment (start 129.54 113.03) (end 129.54 121.285) (width 0.25) (layer F.Cu) (net 7))
  (segment (start 129.54 111.93) (end 135.255 106.215) (width 0.25) (layer B.Cu) (net 7))
  (segment (start 129.54 113.03) (end 129.54 111.93) (width 0.25) (layer B.Cu) (net 7))
  (segment (start 135.255 106.215) (end 135.255 101.6) (width 0.25) (layer B.Cu) (net 7))
  (segment (start 146.685 120.65) (end 146.05 120.015) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 149.38 120.65) (end 146.685 120.65) (width 0.25) (layer F.Cu) (net 11))
  (segment (start 153.83 120.65) (end 151.13 120.65) (width 0.25) (layer F.Cu) (net 12))
  (segment (start 149.38 123.19) (end 146.05 123.19) (width 0.25) (layer F.Cu) (net 13))
  (segment (start 151.13 123.19) (end 154.305 123.19) (width 0.25) (layer F.Cu) (net 14))
  (segment (start 150.735 97.79) (end 150.735 97.315) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 150.735 97.79) (end 154.305 97.79) (width 0.25) (layer F.Cu) (net 15))
  (segment (start 145.81 95.4275) (end 145.6325 95.25) (width 0.25) (layer F.Cu) (net 16))
  (segment (start 148.985 95.25) (end 145.6325 95.25) (width 0.25) (layer F.Cu) (net 16))
  (segment (start 154.305 95.25) (end 150.735 95.25) (width 0.25) (layer F.Cu) (net 17))
  (segment (start 146.685 107.95) (end 146.05 107.315) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 146.05 107.95) (end 148.985 107.95) (width 0.25) (layer F.Cu) (net 18))
  (segment (start 150.735 107.95) (end 154.305 107.95) (width 0.25) (layer F.Cu) (net 19))
  (segment (start 146.05 110.49) (end 148.985 110.49) (width 0.25) (layer F.Cu) (net 20))
  (segment (start 150.735 110.49) (end 154.305 110.49) (width 0.25) (layer F.Cu) (net 21))
  (segment (start 150.735 92.71) (end 154.305 92.71) (width 0.25) (layer F.Cu) (net 22))

)