sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f +==============================================================================+ | biff 1:0.17.pre20000412-5.1 (armhf) Fri, 01 Mar 2019 07:26:06 +0000 | +==============================================================================+ Package: biff Version: 1:0.17.pre20000412-5.1 Source Version: 1:0.17.pre20000412-5.1 Distribution: unstable-amd64-sbuild Machine Architecture: amd64 Host Architecture: armhf Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-3f04779e-871e-4151-8732-b057bbca8ad2' with '<>' I: NOTICE: Log filtering will replace 'build/biff-R6E1YM/resolver-jN1jOx' with '<>' +------------------------------------------------------------------------------+ | Update chroot | +------------------------------------------------------------------------------+ Hit:1 http://10.116.41.102/debian sid InRelease Hit:2 http://cdn-fastly.deb.debian.org/debian sid InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. +------------------------------------------------------------------------------+ | Fetch source files | +------------------------------------------------------------------------------+ Local sources ------------- /home/build/sbuild-setup/repo/pool/main/b/biff/biff_0.17.pre20000412-5.1.dsc exists in /home/build/sbuild-setup/repo/pool/main/b/biff; copying to chroot I: NOTICE: Log filtering will replace 'build/biff-R6E1YM/biff-0.17.pre20000412' with '<>' I: NOTICE: Log filtering will replace 'build/biff-R6E1YM' with '<>' +------------------------------------------------------------------------------+ | Install package build dependencies | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper (>= 10~), cmake, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf Filtered Build-Depends: debhelper (>= 10~), cmake, build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<>/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [957 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [400 B] Get:5 copy:/<>/apt_archive ./ Packages [488 B] Fetched 1845 B in 0s (133 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils cmake cmake-data debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libarchive13 libasan5:armhf libatomic1:armhf libbsd0 libc6:armhf libc6-dev:armhf libcroco3 libcurl4 libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libgssapi-krb5-2 libjsoncpp1 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libncurses6 libnghttp2-14 libpipeline1 libprocps7 libpsl5 librhash0 librtmp1 libsigsegv2 libssh2-1 libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0 libuv1 linux-libc-dev:armhf m4 man-db po-debconf procps Suggested packages: autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois vacation cmake-doc ninja-build dh-make gettext-doc libasprintf-dev libgettextpo-dev groff lrzip glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf krb5-doc krb5-user libstdc++-8-doc:armhf libtool-doc gfortran | fortran95-compiler gcj-jdk m4-doc apparmor less www-browser libmail-box-perl Recommended packages: curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl libglib2.0-data shared-mime-info xdg-user-dirs krb5-locales libgpm2 publicsuffix libltdl-dev libmail-sendmail-perl psmisc The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdmainutils cmake cmake-data debhelper dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext gettext-base groff-base intltool-debian libarchive-zip-perl libarchive13 libasan5:armhf libatomic1:armhf libbsd0 libc6:armhf libc6-dev:armhf libcroco3 libcurl4 libelf1 libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf libglib2.0-0 libgomp1:armhf libgssapi-krb5-2 libjsoncpp1 libk5crypto3 libkeyutils1 libkrb5-3 libkrb5support0 libncurses6 libnghttp2-14 libpipeline1 libprocps7 libpsl5 librhash0 librtmp1 libsigsegv2 libssh2-1 libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0 libuv1 linux-libc-dev:armhf m4 man-db po-debconf procps sbuild-build-depends-main-dummy:armhf 0 upgraded, 58 newly installed, 0 to remove and 0 not upgraded. Need to get 729 kB/25.8 MB of archives. After this operation, 110 MB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [908 B] Get:2 http://10.116.41.102/debian sid/main amd64 libkeyutils1 amd64 1.6-4 [14.8 kB] Get:3 http://10.116.41.102/debian sid/main amd64 libkrb5support0 amd64 1.17-2 [65.6 kB] Get:4 http://10.116.41.102/debian sid/main amd64 libk5crypto3 amd64 1.17-2 [121 kB] Get:5 http://10.116.41.102/debian sid/main amd64 libkrb5-3 amd64 1.17-2 [368 kB] Get:6 http://10.116.41.102/debian sid/main amd64 libgssapi-krb5-2 amd64 1.17-2 [158 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 729 kB in 0s (2592 kB/s) Selecting previously unselected package libbsd0:amd64. (Reading database ... 16440 files and directories currently installed.) Preparing to unpack .../00-libbsd0_0.9.1-2_amd64.deb ... Unpacking libbsd0:amd64 (0.9.1-2) ... Selecting previously unselected package bsdmainutils. Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ... Unpacking bsdmainutils (11.1.2+b1) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.6-3) ... Selecting previously unselected package groff-base. Preparing to unpack .../03-groff-base_1.22.4-2_amd64.deb ... Unpacking groff-base (1.22.4-2) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.1-2) ... Selecting previously unselected package man-db. Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../06-libncurses6_6.1+20181013-2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2) ... Selecting previously unselected package libprocps7:amd64. Preparing to unpack .../07-libprocps7_2%3a3.3.15-2_amd64.deb ... Unpacking libprocps7:amd64 (2:3.3.15-2) ... Selecting previously unselected package procps. Preparing to unpack .../08-procps_2%3a3.3.15-2_amd64.deb ... Unpacking procps (2:3.3.15-2) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.19.8.1-9_amd64.deb ... Unpacking gettext-base (0.19.8.1-9) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../10-libsigsegv2_2.12-2_amd64.deb ... Unpacking libsigsegv2:amd64 (2.12-2) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.18-2_amd64.deb ... Unpacking m4 (1.4.18-2) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.69-11_all.deb ... Unpacking autoconf (2.69-11) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20180224.1_all.deb ... Unpacking autotools-dev (20180224.1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.16.1-4_all.deb ... Unpacking automake (1:1.16.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_0.19.8.1-9_all.deb ... Unpacking autopoint (0.19.8.1-9) ... Selecting previously unselected package cmake-data. Preparing to unpack .../16-cmake-data_3.13.4-1_all.deb ... Unpacking cmake-data (3.13.4-1) ... Selecting previously unselected package libarchive13:amd64. Preparing to unpack .../17-libarchive13_3.3.3-4_amd64.deb ... Unpacking libarchive13:amd64 (3.3.3-4) ... Selecting previously unselected package libkeyutils1:amd64. Preparing to unpack .../18-libkeyutils1_1.6-4_amd64.deb ... Unpacking libkeyutils1:amd64 (1.6-4) ... Selecting previously unselected package libkrb5support0:amd64. Preparing to unpack .../19-libkrb5support0_1.17-2_amd64.deb ... Unpacking libkrb5support0:amd64 (1.17-2) ... Selecting previously unselected package libk5crypto3:amd64. Preparing to unpack .../20-libk5crypto3_1.17-2_amd64.deb ... Unpacking libk5crypto3:amd64 (1.17-2) ... Selecting previously unselected package libkrb5-3:amd64. Preparing to unpack .../21-libkrb5-3_1.17-2_amd64.deb ... Unpacking libkrb5-3:amd64 (1.17-2) ... Selecting previously unselected package libgssapi-krb5-2:amd64. Preparing to unpack .../22-libgssapi-krb5-2_1.17-2_amd64.deb ... Unpacking libgssapi-krb5-2:amd64 (1.17-2) ... Selecting previously unselected package libnghttp2-14:amd64. Preparing to unpack .../23-libnghttp2-14_1.36.0-2_amd64.deb ... Unpacking libnghttp2-14:amd64 (1.36.0-2) ... Selecting previously unselected package libpsl5:amd64. Preparing to unpack .../24-libpsl5_0.20.2-2_amd64.deb ... Unpacking libpsl5:amd64 (0.20.2-2) ... Selecting previously unselected package librtmp1:amd64. Preparing to unpack .../25-librtmp1_2.4+20151223.gitfa8646d.1-2_amd64.deb ... Unpacking librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2) ... Selecting previously unselected package libssh2-1:amd64. Preparing to unpack .../26-libssh2-1_1.8.0-2_amd64.deb ... Unpacking libssh2-1:amd64 (1.8.0-2) ... Selecting previously unselected package libcurl4:amd64. Preparing to unpack .../27-libcurl4_7.64.0-1_amd64.deb ... Unpacking libcurl4:amd64 (7.64.0-1) ... Selecting previously unselected package libjsoncpp1:amd64. Preparing to unpack .../28-libjsoncpp1_1.7.4-3_amd64.deb ... Unpacking libjsoncpp1:amd64 (1.7.4-3) ... Selecting previously unselected package librhash0:amd64. Preparing to unpack .../29-librhash0_1.3.8-1_amd64.deb ... Unpacking librhash0:amd64 (1.3.8-1) ... Selecting previously unselected package libuv1:amd64. Preparing to unpack .../30-libuv1_1.24.1-1_amd64.deb ... Unpacking libuv1:amd64 (1.24.1-1) ... Selecting previously unselected package cmake. Preparing to unpack .../31-cmake_3.13.4-1_amd64.deb ... Unpacking cmake (3.13.4-1) ... Selecting previously unselected package libtool. Preparing to unpack .../32-libtool_2.4.6-10_all.deb ... Unpacking libtool (2.4.6-10) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../33-dh-autoreconf_19_all.deb ... Unpacking dh-autoreconf (19) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../34-libarchive-zip-perl_1.64-1_all.deb ... Unpacking libarchive-zip-perl (1.64-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../35-libfile-stripnondeterminism-perl_1.1.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.1.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../36-dh-strip-nondeterminism_1.1.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.1.1-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../37-libelf1_0.176-1_amd64.deb ... Unpacking libelf1:amd64 (0.176-1) ... Selecting previously unselected package dwz. Preparing to unpack .../38-dwz_0.12-3_amd64.deb ... Unpacking dwz (0.12-3) ... Selecting previously unselected package libglib2.0-0:amd64. Preparing to unpack .../39-libglib2.0-0_2.58.3-1_amd64.deb ... Unpacking libglib2.0-0:amd64 (2.58.3-1) ... Selecting previously unselected package libcroco3:amd64. Preparing to unpack .../40-libcroco3_0.6.12-3_amd64.deb ... Unpacking libcroco3:amd64 (0.6.12-3) ... Selecting previously unselected package gettext. Preparing to unpack .../41-gettext_0.19.8.1-9_amd64.deb ... Unpacking gettext (0.19.8.1-9) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../42-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../43-po-debconf_1.0.21_all.deb ... Unpacking po-debconf (1.0.21) ... Selecting previously unselected package debhelper. Preparing to unpack .../44-debhelper_12.1.1_all.deb ... Unpacking debhelper (12.1.1) ... Selecting previously unselected package gcc-8-base:armhf. Preparing to unpack .../45-gcc-8-base_8.3.0-2_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-2) ... Selecting previously unselected package libgcc1:armhf. Preparing to unpack .../46-libgcc1_1%3a8.3.0-2_armhf.deb ... Unpacking libgcc1:armhf (1:8.3.0-2) ... Selecting previously unselected package libc6:armhf. Preparing to unpack .../47-libc6_2.28-7_armhf.deb ... Unpacking libc6:armhf (2.28-7) ... Selecting previously unselected package libstdc++6:armhf. Preparing to unpack .../48-libstdc++6_8.3.0-2_armhf.deb ... Unpacking libstdc++6:armhf (8.3.0-2) ... Selecting previously unselected package libasan5:armhf. Preparing to unpack .../49-libasan5_8.3.0-2_armhf.deb ... Unpacking libasan5:armhf (8.3.0-2) ... Selecting previously unselected package libatomic1:armhf. Preparing to unpack .../50-libatomic1_8.3.0-2_armhf.deb ... Unpacking libatomic1:armhf (8.3.0-2) ... Selecting previously unselected package linux-libc-dev:armhf. Preparing to unpack .../51-linux-libc-dev_4.19.20-1_armhf.deb ... Unpacking linux-libc-dev:armhf (4.19.20-1) ... Selecting previously unselected package libc6-dev:armhf. Preparing to unpack .../52-libc6-dev_2.28-7_armhf.deb ... Unpacking libc6-dev:armhf (2.28-7) ... Selecting previously unselected package libgomp1:armhf. Preparing to unpack .../53-libgomp1_8.3.0-2_armhf.deb ... Unpacking libgomp1:armhf (8.3.0-2) ... Selecting previously unselected package libubsan1:armhf. Preparing to unpack .../54-libubsan1_8.3.0-2_armhf.deb ... Unpacking libubsan1:armhf (8.3.0-2) ... Selecting previously unselected package libgcc-8-dev:armhf. Preparing to unpack .../55-libgcc-8-dev_8.3.0-2_armhf.deb ... Unpacking libgcc-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package libstdc++-8-dev:armhf. Preparing to unpack .../56-libstdc++-8-dev_8.3.0-2_armhf.deb ... Unpacking libstdc++-8-dev:armhf (8.3.0-2) ... Selecting previously unselected package sbuild-build-depends-main-dummy:armhf. Preparing to unpack .../57-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Setting up libpipeline1:amd64 (1.5.1-2) ... Setting up libkeyutils1:amd64 (1.6-4) ... Setting up libpsl5:amd64 (0.20.2-2) ... Setting up libarchive13:amd64 (3.3.3-4) ... Setting up libarchive-zip-perl (1.64-1) ... Setting up libglib2.0-0:amd64 (2.58.3-1) ... No schema files found: doing nothing. Setting up libprocps7:amd64 (2:3.3.15-2) ... Setting up libnghttp2-14:amd64 (1.36.0-2) ... Setting up linux-libc-dev:armhf (4.19.20-1) ... Setting up gettext-base (0.19.8.1-9) ... Setting up libkrb5support0:amd64 (1.17-2) ... Setting up autotools-dev (20180224.1) ... Setting up libuv1:amd64 (1.24.1-1) ... Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2) ... Setting up libncurses6:amd64 (6.1+20181013-2) ... Setting up libsigsegv2:amd64 (2.12-2) ... Setting up gcc-8-base:armhf (8.3.0-2) ... Setting up autopoint (0.19.8.1-9) ... Setting up libcroco3:amd64 (0.6.12-3) ... Setting up libk5crypto3:amd64 (1.17-2) ... Setting up librhash0:amd64 (1.3.8-1) ... Setting up libuchardet0:amd64 (0.0.6-3) ... Setting up procps (2:3.3.15-2) ... update-alternatives: using /usr/bin/w.procps to provide /usr/bin/w (w) in auto mode Setting up libssh2-1:amd64 (1.8.0-2) ... Setting up cmake-data (3.13.4-1) ... Setting up libkrb5-3:amd64 (1.17-2) ... Setting up libbsd0:amd64 (0.9.1-2) ... Setting up libelf1:amd64 (0.176-1) ... Setting up libjsoncpp1:amd64 (1.7.4-3) ... Setting up libfile-stripnondeterminism-perl (1.1.1-1) ... Setting up gettext (0.19.8.1-9) ... Setting up libtool (2.4.6-10) ... Setting up m4 (1.4.18-2) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up bsdmainutils (11.1.2+b1) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode Setting up libgssapi-krb5-2:amd64 (1.17-2) ... Setting up autoconf (2.69-11) ... Setting up dwz (0.12-3) ... Setting up groff-base (1.22.4-2) ... Setting up libcurl4:amd64 (7.64.0-1) ... Setting up automake (1:1.16.1-4) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21) ... Setting up man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. Setting up cmake (3.13.4-1) ... Setting up dh-autoreconf (19) ... Setting up libc6:armhf (2.28-7) ... Setting up libc6-dev:armhf (2.28-7) ... Setting up libgcc1:armhf (1:8.3.0-2) ... Setting up debhelper (12.1.1) ... Setting up libgomp1:armhf (8.3.0-2) ... Setting up libatomic1:armhf (8.3.0-2) ... Setting up dh-strip-nondeterminism (1.1.1-1) ... Setting up libstdc++6:armhf (8.3.0-2) ... Setting up libasan5:armhf (8.3.0-2) ... Setting up libubsan1:armhf (8.3.0-2) ... Setting up libgcc-8-dev:armhf (8.3.0-2) ... Setting up libstdc++-8-dev:armhf (8.3.0-2) ... Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Processing triggers for libc-bin (2.28-7) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... +------------------------------------------------------------------------------+ | Check architectures | +------------------------------------------------------------------------------+ Initial Foreign Architectures: armhf Arch check ok (armhf included in any) +------------------------------------------------------------------------------+ | Build environment | +------------------------------------------------------------------------------+ Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64) Toolchain package versions: binutils_2.31.1-14 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-7 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 linux-libc-dev_4.19.20-1 Package versions: adduser_3.118 apt_1.8.0~rc4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-14 binutils-arm-linux-gnueabihf_2.31.1-14 binutils-common_2.31.1-14 binutils-x86-64-linux-gnu_2.31.1-14 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.5 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 cmake_3.13.4-1 cmake-data_3.13.4-1 coreutils_8.30-2 cpp_4:8.2.0-2 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.2.0-20cross1 cpp-arm-linux-gnueabihf_4:8.2.0-2 cross-config_2.6.15-2 crossbuild-essential-armhf_12.5 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.1.1 debian-archive-keyring_2018.1 debianutils_4.8.6.1 dh-autoreconf_19 dh-strip-nondeterminism_1.1.1-1 diffutils_1:3.7-2 dirmngr_2.2.12-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 dwz_0.12-3 e2fsprogs_1.44.5-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-2 findutils_4.6.0+git+20190209-2 g++_4:8.2.0-2 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.2.0-20cross1 g++-arm-linux-gnueabihf_4:8.2.0-2 gcc_4:8.2.0-2 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.2.0-20cross1 gcc-8-arm-linux-gnueabihf-base_8.2.0-20cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.2.0-20cross1 gcc-arm-linux-gnueabihf_4:8.2.0-2 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.12-1 gnupg-l10n_2.2.12-1 gnupg-utils_2.2.12-1 gpg_2.2.12-1 gpg-agent_2.2.12-1 gpg-wks-client_2.2.12-1 gpg-wks-server_2.2.12-1 gpgconf_2.2.12-1 gpgsm_2.2.12-1 gpgv_2.2.12-1 grep_3.3-1 groff-base_1.22.4-2 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.52-5 libapt-pkg5.0_1.8.0~rc4 libarchive-zip-perl_1.64-1 libarchive13_3.3.3-4 libasan5_8.3.0-2 libasan5-armhf-cross_8.2.0-20cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.2.0-20cross1 libattr1_1:2.4.47-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libbinutils_2.31.1-14 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9 libc-bin_2.28-7 libc-dev-bin_2.28-7 libc6_2.28-7 libc6-armhf-cross_2.28-4cross1 libc6-dev_2.28-7 libc6-dev-armhf-cross_2.28-4cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libcom-err2_1.44.5-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libcurl4_7.64.0-1 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.247 libdebian-dpkgcross-perl_2.6.15-2 libdpkg-perl_1.19.5 libeatmydata1_105-7 libelf1_0.176-1 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libext2fs2_1.44.5-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-stripnondeterminism-perl_1.1.1-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.2.0-20cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.2.0-20cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libglib2.0-0_2.58.3-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.2.0-20cross1 libgpg-error0_1.35-1 libgssapi-krb5-2_1.17-2 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-1 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libicu63_63.1-6 libidn2-0_2.0.5-1 libio-html-perl_1.001-1 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-2 libjsoncpp1_1.7.4-3 libk5crypto3_1.17-2 libkeyutils1_1.6-4 libkrb5-3_1.17-2 libkrb5support0_1.17-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-2 libmagic1_1:5.35-2 libmailtools-perl_2.18-1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnghttp2-14_1.36.0-2 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libpipeline1_1.5.1-2 libprocps7_2:3.3.15-2 libpsl5_0.20.2-2 libquadmath0_8.3.0-2 libreadline7_7.0-5 librhash0_1.3.8-1 librtmp1_2.4+20151223.gitfa8646d.1-2 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-1 libss2_1.44.5-1 libssh2-1_1.8.0-2 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.2.0-20cross1 libuchardet0_0.0.6-3 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libuv1_1.24.1-1 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-3 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.13-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 po-debconf_1.0.21 procps_2:3.3.15-2 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-1 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1 +------------------------------------------------------------------------------+ | Build | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: biff Binary: biff Architecture: any Version: 1:0.17.pre20000412-5.1 Maintainer: Dave Holland Standards-Version: 3.7.2 Build-Depends: debhelper (>= 10~), cmake Package-List: biff deb mail extra arch=any Checksums-Sha1: 644fd7e8597fae53e1daec399469d3ef0f741748 13709 biff_0.17.pre20000412.orig.tar.gz 65d30391d289940f5f79e0ee93ad6cdae8f0c79b 4656 biff_0.17.pre20000412-5.1.debian.tar.xz Checksums-Sha256: 22da861009102502498f14038b722e0b2268396e69ae5eafa32a9019d6bc6948 13709 biff_0.17.pre20000412.orig.tar.gz d441c1d1480b7924b1fb51cc4bcc49dc35a6121add3782031e403f2ff31324fa 4656 biff_0.17.pre20000412-5.1.debian.tar.xz Files: 0c303067e9954785953a81b5f82db554 13709 biff_0.17.pre20000412.orig.tar.gz a0383fe284f8eb477130013a9fcbc615 4656 biff_0.17.pre20000412-5.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEWXMI+726A12MfJXdxCxY61kUkv0FAlwLvisACgkQxCxY61kU kv3KhBAArEWVpmEI/EnPy0znjORp5pskLxVhekjp2LpmcpgK+GKhe4kDmsdZBTep 9G9Vt/cLSwVMoYBfRJ1LK3aqiL5q69i5VB8MfCXD4UHM2KM0+d8LlTqnvs44gP5H j0exbJ7IkTG8Vm5U/mztsp5jsLTCZxFsSkojTW0qCDdS5LijC5cjiRWk1H0KiPn1 KPgNgJpfdo+EGw64mswCNyDxSJECrc6S+btL9CPWQH6JsBEbkxd6sKuOzEUTOpG9 SmeEGrQQTvt9svqC4P4KQEh3HPXaBWeHjS9rZbfL3PCNuZWVijrNpDu//5Jo5oDH MQZWXN8DUZsd06crYd+TSKJcX0xg9tfBgaz92yip57CejWYPYON0MF1Uq43HzEM7 MFXlSPdOidNurshMSqXiX1QvkarjDIq6zcYqGyJV5Umjk89rrfObm6evhB5qsmV2 3tylH5WR68C3J7XmpNHywDqTMl+pJh0P/TcZcqvVU0UiHBifnpyu/RX7y3TmypsH CXMu+2VADZ59T09X6Lt+3iJWe/WlPl11942TxSDWzK9fxnzWj6LwzxyxsLpH6yOA 7CCusfLjUkB5oSTrMxwfDDnjFZo5cNcgT3fqI5wpBE9qhmUc0IR9/oWnvmfXaOOq n2BqXzXXlwRZZrRNWgLQmO56Svzj9MOI3TWOqKw3w8Ne5Y0CTV4= =rVsb -----END PGP SIGNATURE----- gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error gpgv: Signature made Sat Dec 8 12:50:51 2018 UTC gpgv: using RSA key 597308FBBDBA035D8C7C95DDC42C58EB591492FD gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./biff_0.17.pre20000412-5.1.dsc dpkg-source: info: extracting biff in /<> dpkg-source: info: unpacking biff_0.17.pre20000412.orig.tar.gz dpkg-source: info: unpacking biff_0.17.pre20000412-5.1.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying old-debian-patches.patch dpkg-source: info: applying use-cmake-as-buildsystem.patch dpkg-source: info: applying use-cmake-as-buildsystem-debian-extras.patch Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf CCACHE_COMPRESS=1 CCACHE_DIR=/var/cache/ccache-sbuild CCACHE_UMASK=002 CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf DEB_BUILD_OPTIONS=nocheck HOME=/sbuild-nonexistent LANG=en_US.UTF-8 LC_ALL=C.UTF-8 LD_LIBRARY_PATH=/usr/lib/libeatmydata LD_PRELOAD=libeatmydata.so LOGNAME=build PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games PWD=/<> SCHROOT_ALIAS_NAME=unstable-amd64-sbuild SCHROOT_CHROOT_NAME=unstable-amd64-sbuild SCHROOT_COMMAND=env SCHROOT_GID=1000 SCHROOT_GROUP=build SCHROOT_SESSION_ID=unstable-amd64-sbuild-3f04779e-871e-4151-8732-b057bbca8ad2 SCHROOT_UID=1000 SCHROOT_USER=build SHELL=/bin/sh USER=build dpkg-buildpackage ----------------- Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16 dpkg-buildpackage: info: source package biff dpkg-buildpackage: info: source version 1:0.17.pre20000412-5.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Christoph Biedl dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf fakeroot debian/rules clean dh clean --buildsystem=cmake dh_auto_clean -O--buildsystem=cmake dh_autoreconf_clean -O--buildsystem=cmake dh_clean -O--buildsystem=cmake debian/rules build-arch dh build-arch --buildsystem=cmake dh_update_autotools_config -a -O--buildsystem=cmake dh_autoreconf -a -O--buildsystem=cmake dh_auto_configure -a -O--buildsystem=cmake cd obj-arm-linux-gnueabihf && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=arm -DCMAKE_C_COMPILER=arm-linux-gnueabihf-gcc -DCMAKE_CXX_COMPILER=arm-linux-gnueabihf-g\+\+ -DPKG_CONFIG_EXECUTABLE=/usr/bin/arm-linux-gnueabihf-pkg-config -DPKGCONFIG_EXECUTABLE=/usr/bin/arm-linux-gnueabihf-pkg-config -DQMAKE_EXECUTABLE=/usr/bin/arm-linux-gnueabihf-qmake -DCMAKE_INSTALL_LIBDIR=lib/arm-linux-gnueabihf .. -- The C compiler identification is GNU 8.2.0 -- The CXX compiler identification is GNU 8.2.0 -- Check for working C compiler: /usr/lib/ccache/arm-linux-gnueabihf-gcc -- Check for working C compiler: /usr/lib/ccache/arm-linux-gnueabihf-gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Detecting C compile features -- Detecting C compile features - done -- Check for working CXX compiler: /usr/lib/ccache/arm-linux-gnueabihf-g++ -- Check for working CXX compiler: /usr/lib/ccache/arm-linux-gnueabihf-g++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Detecting CXX compile features -- Detecting CXX compile features - done -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_EXPORT_NO_PACKAGE_REGISTRY CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY CMAKE_INSTALL_LIBDIR CMAKE_INSTALL_LOCALSTATEDIR CMAKE_INSTALL_SYSCONFDIR PKGCONFIG_EXECUTABLE PKG_CONFIG_EXECUTABLE QMAKE_EXECUTABLE -- Build files have been written to: /<>/obj-arm-linux-gnueabihf dh_auto_build -a -O--buildsystem=cmake cd obj-arm-linux-gnueabihf && make -j16 PKG_CONFIG=arm-linux-gnueabihf-pkg-config CXX=arm-linux-gnueabihf-g\+\+ CC=arm-linux-gnueabihf-gcc make[1]: Entering directory '/<>/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/<> -B/<>/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /<>/obj-arm-linux-gnueabihf/CMakeFiles /<>/obj-arm-linux-gnueabihf/CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[2]: Entering directory '/<>/obj-arm-linux-gnueabihf' make -f biff/CMakeFiles/biff.dir/build.make biff/CMakeFiles/biff.dir/depend make -f comsat/CMakeFiles/in.comsat.dir/build.make comsat/CMakeFiles/in.comsat.dir/depend make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' cd /<>/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /<> /<>/comsat /<>/obj-arm-linux-gnueabihf /<>/obj-arm-linux-gnueabihf/comsat /<>/obj-arm-linux-gnueabihf/comsat/CMakeFiles/in.comsat.dir/DependInfo.cmake --color= make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' cd /<>/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /<> /<>/biff /<>/obj-arm-linux-gnueabihf /<>/obj-arm-linux-gnueabihf/biff /<>/obj-arm-linux-gnueabihf/biff/CMakeFiles/biff.dir/DependInfo.cmake --color= Scanning dependencies of target in.comsat make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' make -f comsat/CMakeFiles/in.comsat.dir/build.make comsat/CMakeFiles/in.comsat.dir/build make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' Scanning dependencies of target biff make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' make -f biff/CMakeFiles/biff.dir/build.make biff/CMakeFiles/biff.dir/build make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' [ 25%] Building C object comsat/CMakeFiles/in.comsat.dir/comsat.c.o cd /<>/obj-arm-linux-gnueabihf/comsat && /usr/lib/ccache/arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -o CMakeFiles/in.comsat.dir/comsat.c.o -c /<>/comsat/comsat.c [ 50%] Building C object biff/CMakeFiles/biff.dir/biff.c.o cd /<>/obj-arm-linux-gnueabihf/biff && /usr/lib/ccache/arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -o CMakeFiles/biff.dir/biff.c.o -c /<>/biff/biff.c [ 75%] Linking C executable biff cd /<>/obj-arm-linux-gnueabihf/biff && /usr/bin/cmake -E cmake_link_script CMakeFiles/biff.dir/link.txt --verbose=1 /usr/lib/ccache/arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro CMakeFiles/biff.dir/biff.c.o -o biff make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' [ 75%] Built target biff /<>/comsat/comsat.c: In function ‘jkfprintf’: /<>/comsat/comsat.c:476:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result] setuid(p->pw_uid); ^~~~~~~~~~~~~~~~~ [100%] Linking C executable in.comsat cd /<>/obj-arm-linux-gnueabihf/comsat && /usr/bin/cmake -E cmake_link_script CMakeFiles/in.comsat.dir/link.txt --verbose=1 /usr/lib/ccache/arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/<>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -Wl,-z,relro CMakeFiles/in.comsat.dir/comsat.c.o -o in.comsat make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' [100%] Built target in.comsat make[2]: Leaving directory '/<>/obj-arm-linux-gnueabihf' /usr/bin/cmake -E cmake_progress_start /<>/obj-arm-linux-gnueabihf/CMakeFiles 0 make[1]: Leaving directory '/<>/obj-arm-linux-gnueabihf' dh_auto_test -a -O--buildsystem=cmake create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary-arch dh binary-arch --buildsystem=cmake dh_testroot -a -O--buildsystem=cmake dh_prep -a -O--buildsystem=cmake dh_auto_install -a -O--buildsystem=cmake cd obj-arm-linux-gnueabihf && make -j16 install DESTDIR=/<>/debian/biff AM_UPDATE_INFO_DIR=no make[1]: Entering directory '/<>/obj-arm-linux-gnueabihf' /usr/bin/cmake -S/<> -B/<>/obj-arm-linux-gnueabihf --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /<>/obj-arm-linux-gnueabihf/CMakeFiles /<>/obj-arm-linux-gnueabihf/CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[2]: Entering directory '/<>/obj-arm-linux-gnueabihf' make -f biff/CMakeFiles/biff.dir/build.make biff/CMakeFiles/biff.dir/depend make -f comsat/CMakeFiles/in.comsat.dir/build.make comsat/CMakeFiles/in.comsat.dir/depend make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' cd /<>/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /<> /<>/comsat /<>/obj-arm-linux-gnueabihf /<>/obj-arm-linux-gnueabihf/comsat /<>/obj-arm-linux-gnueabihf/comsat/CMakeFiles/in.comsat.dir/DependInfo.cmake --color= make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' cd /<>/obj-arm-linux-gnueabihf && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /<> /<>/biff /<>/obj-arm-linux-gnueabihf /<>/obj-arm-linux-gnueabihf/biff /<>/obj-arm-linux-gnueabihf/biff/CMakeFiles/biff.dir/DependInfo.cmake --color= make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' make -f comsat/CMakeFiles/in.comsat.dir/build.make comsat/CMakeFiles/in.comsat.dir/build make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' make[3]: Nothing to be done for 'comsat/CMakeFiles/in.comsat.dir/build'. make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' make -f biff/CMakeFiles/biff.dir/build.make biff/CMakeFiles/biff.dir/build make[3]: Entering directory '/<>/obj-arm-linux-gnueabihf' make[3]: Nothing to be done for 'biff/CMakeFiles/biff.dir/build'. make[3]: Leaving directory '/<>/obj-arm-linux-gnueabihf' [ 50%] Built target in.comsat [100%] Built target biff make[2]: Leaving directory '/<>/obj-arm-linux-gnueabihf' /usr/bin/cmake -E cmake_progress_start /<>/obj-arm-linux-gnueabihf/CMakeFiles 0 make -f CMakeFiles/Makefile2 preinstall make[2]: Entering directory '/<>/obj-arm-linux-gnueabihf' make[2]: Nothing to be done for 'preinstall'. make[2]: Leaving directory '/<>/obj-arm-linux-gnueabihf' Install the project... /usr/bin/cmake -P cmake_install.cmake -- Install configuration: "None" -- Installing: /<>/debian/biff/usr/bin/biff -- Installing: /<>/debian/biff/usr/share/man/man1/biff.1 -- Installing: /<>/debian/biff/usr/sbin/in.comsat -- Installing: /<>/debian/biff/usr/share/man/man8/in.comsat.8 make[1]: Leaving directory '/<>/obj-arm-linux-gnueabihf' dh_installdocs -a -O--buildsystem=cmake dh_installchangelogs -a -O--buildsystem=cmake dh_installman -a -O--buildsystem=cmake dh_systemd_enable -a -O--buildsystem=cmake dh_installinit -a -O--buildsystem=cmake dh_systemd_start -a -O--buildsystem=cmake dh_perl -a -O--buildsystem=cmake dh_link -a -O--buildsystem=cmake dh_strip_nondeterminism -a -O--buildsystem=cmake dh_compress -a -O--buildsystem=cmake dh_fixperms -a -O--buildsystem=cmake dh_missing -a -O--buildsystem=cmake dh_strip -a -O--buildsystem=cmake dh_makeshlibs -a -O--buildsystem=cmake dh_shlibdeps -a -O--buildsystem=cmake dh_installdeb -a -O--buildsystem=cmake dh_gencontrol -a -O--buildsystem=cmake dh_md5sums -a -O--buildsystem=cmake dh_builddeb -a -O--buildsystem=cmake dpkg-deb: building package 'biff' in '../biff_0.17.pre20000412-5.1_armhf.deb'. dpkg-deb: building package 'biff-dbgsym' in '../biff-dbgsym_0.17.pre20000412-5.1_armhf.deb'. dpkg-genbuildinfo --build=any dpkg-genchanges --build=any >../biff_0.17.pre20000412-5.1_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2019-03-01T07:26:26Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes | +------------------------------------------------------------------------------+ biff_0.17.pre20000412-5.1_armhf.changes: ---------------------------------------- Format: 1.8 Date: Sat, 08 Dec 2018 10:33:07 +0100 Source: biff Binary: biff biff-dbgsym Built-For-Profiles: cross nocheck Architecture: armhf Version: 1:0.17.pre20000412-5.1 Distribution: unstable-amd64-sbuild Urgency: medium Maintainer: Dave Holland Changed-By: Christoph Biedl Description: biff - a mail notification tool Closes: 777290 912120 Changes: biff (1:0.17.pre20000412-5.1) unstable; urgency=medium . * Non-maintainer upload * Use cmake as build system, switch to debhelper. Closes: #777290, #912120 Checksums-Sha1: 0ee26175b2e493669351226954c0fb4e991ade2d 15788 biff-dbgsym_0.17.pre20000412-5.1_armhf.deb 5fa7e08ce50682edf06661259bb7c89a5501b99f 5441 biff_0.17.pre20000412-5.1_armhf.buildinfo 5fd3f7f312d8817440d99b0ae2c30708657a50d6 12964 biff_0.17.pre20000412-5.1_armhf.deb Checksums-Sha256: dae0e9b322f2a2cd5c4b70a720ace258e730b488089e0c183df52db8aefe14fc 15788 biff-dbgsym_0.17.pre20000412-5.1_armhf.deb ed244a6c8876a9afaafea724964c0fae1e8b4643ffd968f0bafffdccda0ac9e7 5441 biff_0.17.pre20000412-5.1_armhf.buildinfo ad6abd3de4d0c996f05ebfdbb83d0efcff3d86fc33cb701c4eb6ae27641c0040 12964 biff_0.17.pre20000412-5.1_armhf.deb Files: fc681dbb7f21a7d80d717580b1200e58 15788 debug optional biff-dbgsym_0.17.pre20000412-5.1_armhf.deb ff6bdc8bc288ab70ce2c3b2b4863317f 5441 mail extra biff_0.17.pre20000412-5.1_armhf.buildinfo b47e9482a04a3c524c3ad493a040cfc4 12964 mail extra biff_0.17.pre20000412-5.1_armhf.deb +------------------------------------------------------------------------------+ | Buildinfo | +------------------------------------------------------------------------------+ Format: 1.0 Source: biff Binary: biff Architecture: armhf Version: 1:0.17.pre20000412-5.1 Checksums-Md5: fc681dbb7f21a7d80d717580b1200e58 15788 biff-dbgsym_0.17.pre20000412-5.1_armhf.deb b47e9482a04a3c524c3ad493a040cfc4 12964 biff_0.17.pre20000412-5.1_armhf.deb Checksums-Sha1: 0ee26175b2e493669351226954c0fb4e991ade2d 15788 biff-dbgsym_0.17.pre20000412-5.1_armhf.deb 5fd3f7f312d8817440d99b0ae2c30708657a50d6 12964 biff_0.17.pre20000412-5.1_armhf.deb Checksums-Sha256: dae0e9b322f2a2cd5c4b70a720ace258e730b488089e0c183df52db8aefe14fc 15788 biff-dbgsym_0.17.pre20000412-5.1_armhf.deb ad6abd3de4d0c996f05ebfdbb83d0efcff3d86fc33cb701c4eb6ae27641c0040 12964 biff_0.17.pre20000412-5.1_armhf.deb Build-Origin: Debian Build-Architecture: amd64 Build-Date: Fri, 01 Mar 2019 07:26:25 +0000 Build-Path: /<> Installed-Build-Depends: autoconf (= 2.69-11), automake (= 1:1.16.1-4), autopoint (= 0.19.8.1-9), autotools-dev (= 20180224.1), base-files (= 10.1), base-passwd (= 3.5.46), bash (= 5.0-2), binutils (= 2.31.1-14), binutils-common (= 2.31.1-14), binutils-x86-64-linux-gnu (= 2.31.1-14), bsdmainutils (= 11.1.2+b1), bsdutils (= 1:2.33.1-0.1), build-essential (= 12.5), bzip2 (= 1.0.6-9), cmake (= 3.13.4-1), cmake-data (= 3.13.4-1), coreutils (= 8.30-2), cpp (= 4:8.2.0-2), cpp-8 (= 8.3.0-2), dash (= 0.5.10.2-5), debconf (= 1.5.71), debhelper (= 12.1.1), debianutils (= 4.8.6.1), dh-autoreconf (= 19), dh-strip-nondeterminism (= 1.1.1-1), diffutils (= 1:3.7-2), dpkg (= 1.19.5), dpkg-dev (= 1.19.5), dwz (= 0.12-3), fdisk (= 2.33.1-0.1), file (= 1:5.35-2), findutils (= 4.6.0+git+20190209-2), g++ (= 4:8.2.0-2), g++-8 (= 8.3.0-2), gcc (= 4:8.2.0-2), gcc-8 (= 8.3.0-2), gcc-8-base (= 8.3.0-2), gettext (= 0.19.8.1-9), gettext-base (= 0.19.8.1-9), grep (= 3.3-1), groff-base (= 1.22.4-2), gzip (= 1.9-3), hostname (= 3.21), init-system-helpers (= 1.56+nmu1), intltool-debian (= 0.35.0+20060710.5), libacl1 (= 2.2.52-5), libarchive-zip-perl (= 1.64-1), libarchive13 (= 3.3.3-4), libasan5 (= 8.3.0-2), libatomic1 (= 8.3.0-2), libattr1 (= 1:2.4.47-4), libaudit-common (= 1:2.8.4-2), libaudit1 (= 1:2.8.4-2), libbinutils (= 2.31.1-14), libblkid1 (= 2.33.1-0.1), libbsd0 (= 0.9.1-2), libbz2-1.0 (= 1.0.6-9), libc-bin (= 2.28-7), libc-dev-bin (= 2.28-7), libc6 (= 2.28-7), libc6-dev (= 2.28-7), libcap-ng0 (= 0.7.9-2), libcc1-0 (= 8.3.0-2), libcom-err2 (= 1.44.5-1), libcroco3 (= 0.6.12-3), libcurl4 (= 7.64.0-1), libdb5.3 (= 5.3.28+dfsg1-0.5), libdebconfclient0 (= 0.247), libdpkg-perl (= 1.19.5), libelf1 (= 0.176-1), libexpat1 (= 2.2.6-1), libfdisk1 (= 2.33.1-0.1), libffi6 (= 3.2.1-9), libfile-stripnondeterminism-perl (= 1.1.1-1), libgcc-8-dev (= 8.3.0-2), libgcc1 (= 1:8.3.0-2), libgcrypt20 (= 1.8.4-5), libgdbm-compat4 (= 1.18.1-3), libgdbm6 (= 1.18.1-3), libglib2.0-0 (= 2.58.3-1), libgmp10 (= 2:6.1.2+dfsg-4), libgnutls30 (= 3.6.6-2), libgomp1 (= 8.3.0-2), libgpg-error0 (= 1.35-1), libgssapi-krb5-2 (= 1.17-2), libhogweed4 (= 3.4.1-1), libicu63 (= 63.1-6), libidn2-0 (= 2.0.5-1), libisl19 (= 0.20-2), libitm1 (= 8.3.0-2), libjsoncpp1 (= 1.7.4-3), libk5crypto3 (= 1.17-2), libkeyutils1 (= 1.6-4), libkrb5-3 (= 1.17-2), libkrb5support0 (= 1.17-2), libldap-2.4-2 (= 2.4.47+dfsg-3), libldap-common (= 2.4.47+dfsg-3), liblsan0 (= 8.3.0-2), liblz4-1 (= 1.8.3-1), liblzma5 (= 5.2.4-1), libmagic-mgc (= 1:5.35-2), libmagic1 (= 1:5.35-2), libmount1 (= 2.33.1-0.1), libmpc3 (= 1.1.0-1), libmpfr6 (= 4.0.2-1), libmpx2 (= 8.3.0-2), libncurses6 (= 6.1+20181013-2), libncursesw6 (= 6.1+20181013-2), libnettle6 (= 3.4.1-1), libnghttp2-14 (= 1.36.0-2), libp11-kit0 (= 0.23.15-2), libpam-modules (= 1.3.1-5), libpam-modules-bin (= 1.3.1-5), libpam-runtime (= 1.3.1-5), libpam0g (= 1.3.1-5), libpcre3 (= 2:8.39-11), libperl5.28 (= 5.28.1-4), libpipeline1 (= 1.5.1-2), libprocps7 (= 2:3.3.15-2), libpsl5 (= 0.20.2-2), libquadmath0 (= 8.3.0-2), librhash0 (= 1.3.8-1), librtmp1 (= 2.4+20151223.gitfa8646d.1-2), libsasl2-2 (= 2.1.27+dfsg-1), libsasl2-modules-db (= 2.1.27+dfsg-1), libseccomp2 (= 2.3.3-4), libselinux1 (= 2.8-1+b1), libsigsegv2 (= 2.12-2), libsmartcols1 (= 2.33.1-0.1), libssh2-1 (= 1.8.0-2), libssl1.1 (= 1.1.1b-1), libstdc++-8-dev (= 8.3.0-2), libstdc++6 (= 8.3.0-2), libsystemd0 (= 241-1), libtasn1-6 (= 4.13-3), libtinfo6 (= 6.1+20181013-2), libtool (= 2.4.6-10), libtsan0 (= 8.3.0-2), libubsan1 (= 8.3.0-2), libuchardet0 (= 0.0.6-3), libudev1 (= 241-1), libunistring2 (= 0.9.10-1), libuuid1 (= 2.33.1-0.1), libuv1 (= 1.24.1-1), libxml2 (= 2.9.4+dfsg1-7+b3), libzstd1 (= 1.3.8+dfsg-3), linux-libc-dev (= 4.19.20-1), login (= 1:4.5-1.1), lsb-base (= 10.2018112800), m4 (= 1.4.18-2), make (= 4.2.1-1.2), man-db (= 2.8.5-2), mawk (= 1.3.3-17+b3), ncurses-base (= 6.1+20181013-2), ncurses-bin (= 6.1+20181013-2), patch (= 2.7.6-3), perl (= 5.28.1-4), perl-base (= 5.28.1-4), perl-modules-5.28 (= 5.28.1-4), po-debconf (= 1.0.21), procps (= 2:3.3.15-2), sed (= 4.7-1), sensible-utils (= 0.0.12), sysvinit-utils (= 2.93-8), tar (= 1.30+dfsg-5), util-linux (= 2.33.1-0.1), xz-utils (= 5.2.4-1), zlib1g (= 1:1.2.11.dfsg-1) Environment: DEB_BUILD_OPTIONS="nocheck parallel=16" DEB_BUILD_PROFILES="cross nocheck" LANG="en_US.UTF-8" LC_ALL="C.UTF-8" LD_LIBRARY_PATH="/usr/lib/libeatmydata" MAKEFLAGS=" -j16" SOURCE_DATE_EPOCH="1544261587" +------------------------------------------------------------------------------+ | Package contents | +------------------------------------------------------------------------------+ biff-dbgsym_0.17.pre20000412-5.1_armhf.deb ------------------------------------------ new Debian package, version 2.0. size 15788 bytes: control archive=580 bytes. 386 bytes, 12 lines control 212 bytes, 2 lines md5sums Package: biff-dbgsym Source: biff Version: 1:0.17.pre20000412-5.1 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Dave Holland Installed-Size: 36 Depends: biff (= 1:0.17.pre20000412-5.1) Section: debug Priority: optional Description: debug symbols for biff Build-Ids: 47ea95b3653d8512409e3f89be29748734d2f69d e02beff7dccbb5b851b37d3fd0b5950b4ce39df3 drwxr-xr-x root/root 0 2018-12-08 09:33 ./ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/lib/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/lib/debug/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/lib/debug/.build-id/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/lib/debug/.build-id/47/ -rw-r--r-- root/root 15988 2018-12-08 09:33 ./usr/lib/debug/.build-id/47/ea95b3653d8512409e3f89be29748734d2f69d.debug drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/lib/debug/.build-id/e0/ -rw-r--r-- root/root 8380 2018-12-08 09:33 ./usr/lib/debug/.build-id/e0/2beff7dccbb5b851b37d3fd0b5950b4ce39df3.debug drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/doc/ lrwxrwxrwx root/root 0 2018-12-08 09:33 ./usr/share/doc/biff-dbgsym -> biff biff_0.17.pre20000412-5.1_armhf.deb ----------------------------------- new Debian package, version 2.0. size 12964 bytes: control archive=1492 bytes. 1078 bytes, 25 lines control 500 bytes, 8 lines md5sums 527 bytes, 22 lines * postinst #!/bin/sh 117 bytes, 11 lines * postrm #!/bin/sh 118 bytes, 7 lines * prerm #!/bin/sh Package: biff Version: 1:0.17.pre20000412-5.1 Architecture: armhf Maintainer: Dave Holland Installed-Size: 40 Depends: libc6 (>= 2.4), netbase Section: mail Priority: extra Description: a mail notification tool biff is a small program that prints a message to your terminal when new email arrives. Actually, the message is printed by the comsat daemon, and biff just enables/disables the u+x permission flag for the terminal, which comsat uses to determine whether or not to write to your terminal. . biff is mainly of historic interest, since there are much better alternatives (such as xlbiff and gbuffy) that are network-aware and do not require a daemon. Although there are no known security problems, running additional services is often considered risky. . By default, the biff service is disabled. To use biff email notification, you must enable this service by running 'update-inetd --enable biff' after the package is installed. You may also need to modify the configuration of your mail transport agent to enable comsat notification. drwxr-xr-x root/root 0 2018-12-08 09:33 ./ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/bin/ -rwxr-xr-x root/root 5828 2018-12-08 09:33 ./usr/bin/biff drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/sbin/ -rwxr-xr-x root/root 10068 2018-12-08 09:33 ./usr/sbin/in.comsat drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/doc/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/doc/biff/ -rw-r--r-- root/root 467 2007-09-28 13:57 ./usr/share/doc/biff/README.Debian -rw-r--r-- root/root 1372 2018-12-08 09:33 ./usr/share/doc/biff/changelog.Debian.gz -rw-r--r-- root/root 999 1999-12-17 15:01 ./usr/share/doc/biff/changelog.gz -rw-r--r-- root/root 417 2007-09-28 13:57 ./usr/share/doc/biff/copyright drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/man/ drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/man/man1/ -rw-r--r-- root/root 1756 2018-12-08 09:33 ./usr/share/man/man1/biff.1.gz drwxr-xr-x root/root 0 2018-12-08 09:33 ./usr/share/man/man8/ lrwxrwxrwx root/root 0 2018-12-08 09:33 ./usr/share/man/man8/comsat.8.gz -> in.comsat.8.gz -rw-r--r-- root/root 1865 2018-12-08 09:33 ./usr/share/man/man8/in.comsat.8.gz lintian ------- Setup apt archive ----------------- Merged Build-Depends: lintian:amd64 Filtered Build-Depends: lintian:amd64 dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<>/apt_archive/sbuild-build-depends-lintian-dummy.deb'. Ign:1 copy:/<>/apt_archive ./ InRelease Get:2 copy:/<>/apt_archive ./ Release [963 B] Ign:3 copy:/<>/apt_archive ./ Release.gpg Get:4 copy:/<>/apt_archive ./ Sources [531 B] Get:5 copy:/<>/apt_archive ./ Packages [614 B] Fetched 2108 B in 0s (141 kB/s) Reading package lists... Reading package lists... Install lintian build dependencies (apt-based resolver) ------------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. The following additional packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils t1utils Suggested packages: libhtml-template-perl binutils-multiarch libtext-template-perl Recommended packages: libcgi-fast-perl libasync-mergepoint-perl libsereal-perl libtest-fatal-perl libtest-refcount-perl libdigest-bubblebabble-perl libnet-dns-sec-perl libnet-libidn-perl libunicode-utf8-perl libperlio-gzip-perl The following NEW packages will be installed: diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl libio-pty-perl libipc-run-perl libipc-system-simple-perl liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl libsub-name-perl libtext-levenshtein-perl lintian patchutils sbuild-build-depends-lintian-dummy:armhf t1utils 0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded. Need to get 2847 kB/2971 kB of archives. After this operation, 9356 kB of additional disk space will be used. Get:1 copy:/<>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B] Get:2 http://10.116.41.102/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB] Get:3 http://10.116.41.102/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB] Get:4 http://10.116.41.102/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB] Get:5 http://10.116.41.102/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB] Get:6 http://10.116.41.102/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB] Get:7 http://10.116.41.102/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB] Get:8 http://10.116.41.102/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB] Get:9 http://10.116.41.102/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB] Get:10 http://10.116.41.102/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB] Get:11 http://10.116.41.102/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB] Get:12 http://10.116.41.102/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB] Get:13 http://10.116.41.102/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB] Get:14 http://10.116.41.102/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB] Get:15 http://10.116.41.102/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB] Get:16 http://10.116.41.102/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB] Get:17 http://10.116.41.102/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB] Get:18 http://10.116.41.102/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB] Get:19 http://10.116.41.102/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB] Get:20 http://10.116.41.102/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB] Get:21 http://10.116.41.102/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB] Get:22 http://10.116.41.102/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB] Get:23 http://10.116.41.102/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB] Get:24 http://10.116.41.102/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB] Get:25 http://10.116.41.102/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB] Get:26 http://10.116.41.102/debian sid/main amd64 lintian all 2.9.1 [1193 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2847 kB in 1s (3140 kB/s) Selecting previously unselected package diffstat. (Reading database ... 21872 files and directories currently installed.) Preparing to unpack .../00-diffstat_1.62-1_amd64.deb ... Unpacking diffstat (1.62-1) ... Selecting previously unselected package libapt-pkg-perl. Preparing to unpack .../01-libapt-pkg-perl_0.1.34+b1_amd64.deb ... Unpacking libapt-pkg-perl (0.1.34+b1) ... Selecting previously unselected package libcapture-tiny-perl. Preparing to unpack .../02-libcapture-tiny-perl_0.48-1_all.deb ... Unpacking libcapture-tiny-perl (0.48-1) ... Selecting previously unselected package libcgi-pm-perl. Preparing to unpack .../03-libcgi-pm-perl_4.40-1_all.deb ... Unpacking libcgi-pm-perl (4.40-1) ... Selecting previously unselected package libsub-name-perl. Preparing to unpack .../04-libsub-name-perl_0.21-1+b3_amd64.deb ... Unpacking libsub-name-perl (0.21-1+b3) ... Selecting previously unselected package libclass-accessor-perl. Preparing to unpack .../05-libclass-accessor-perl_0.51-1_all.deb ... Unpacking libclass-accessor-perl (0.51-1) ... Selecting previously unselected package libclone-perl. Preparing to unpack .../06-libclone-perl_0.41-1+b1_amd64.deb ... Unpacking libclone-perl (0.41-1+b1) ... Selecting previously unselected package libdigest-hmac-perl. Preparing to unpack .../07-libdigest-hmac-perl_1.03+dfsg-2_all.deb ... Unpacking libdigest-hmac-perl (1.03+dfsg-2) ... Selecting previously unselected package libnet-ip-perl. Preparing to unpack .../08-libnet-ip-perl_1.26-2_all.deb ... Unpacking libnet-ip-perl (1.26-2) ... Selecting previously unselected package libnet-dns-perl. Preparing to unpack .../09-libnet-dns-perl_1.19-1_all.deb ... Unpacking libnet-dns-perl (1.19-1) ... Selecting previously unselected package libnet-domain-tld-perl. Preparing to unpack .../10-libnet-domain-tld-perl_1.75-1_all.deb ... Unpacking libnet-domain-tld-perl (1.75-1) ... Selecting previously unselected package libemail-valid-perl. Preparing to unpack .../11-libemail-valid-perl_1.202-1_all.deb ... Unpacking libemail-valid-perl (1.202-1) ... Selecting previously unselected package libexporter-tiny-perl. Preparing to unpack .../12-libexporter-tiny-perl_1.002001-1_all.deb ... Unpacking libexporter-tiny-perl (1.002001-1) ... Selecting previously unselected package libipc-system-simple-perl. Preparing to unpack .../13-libipc-system-simple-perl_1.25-4_all.deb ... Unpacking libipc-system-simple-perl (1.25-4) ... Selecting previously unselected package libfile-basedir-perl. Preparing to unpack .../14-libfile-basedir-perl_0.08-1_all.deb ... Unpacking libfile-basedir-perl (0.08-1) ... Selecting previously unselected package libfuture-perl. Preparing to unpack .../15-libfuture-perl_0.39-1_all.deb ... Unpacking libfuture-perl (0.39-1) ... Selecting previously unselected package libstruct-dumb-perl. Preparing to unpack .../16-libstruct-dumb-perl_0.09-1_all.deb ... Unpacking libstruct-dumb-perl (0.09-1) ... Selecting previously unselected package libio-async-perl. Preparing to unpack .../17-libio-async-perl_0.72-1_all.deb ... Unpacking libio-async-perl (0.72-1) ... Selecting previously unselected package libio-pty-perl. Preparing to unpack .../18-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ... Unpacking libio-pty-perl (1:1.08-1.1+b5) ... Selecting previously unselected package libipc-run-perl. Preparing to unpack .../19-libipc-run-perl_20180523.0-1_all.deb ... Unpacking libipc-run-perl (20180523.0-1) ... Selecting previously unselected package liblist-moreutils-perl. Preparing to unpack .../20-liblist-moreutils-perl_0.416-1+b4_amd64.deb ... Unpacking liblist-moreutils-perl (0.416-1+b4) ... Selecting previously unselected package libparse-debianchangelog-perl. Preparing to unpack .../21-libparse-debianchangelog-perl_1.2.0-13_all.deb ... Unpacking libparse-debianchangelog-perl (1.2.0-13) ... Selecting previously unselected package libpath-tiny-perl. Preparing to unpack .../22-libpath-tiny-perl_0.108-1_all.deb ... Unpacking libpath-tiny-perl (0.108-1) ... Selecting previously unselected package libtext-levenshtein-perl. Preparing to unpack .../23-libtext-levenshtein-perl_0.13-1_all.deb ... Unpacking libtext-levenshtein-perl (0.13-1) ... Selecting previously unselected package patchutils. Preparing to unpack .../24-patchutils_0.3.4-2_amd64.deb ... Unpacking patchutils (0.3.4-2) ... Selecting previously unselected package t1utils. Preparing to unpack .../25-t1utils_1.41-3_amd64.deb ... Unpacking t1utils (1.41-3) ... Selecting previously unselected package lintian. Preparing to unpack .../26-lintian_2.9.1_all.deb ... Unpacking lintian (2.9.1) ... Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf. Preparing to unpack .../27-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Setting up libapt-pkg-perl (0.1.34+b1) ... Setting up libstruct-dumb-perl (0.09-1) ... Setting up libio-pty-perl (1:1.08-1.1+b5) ... Setting up libclone-perl (0.41-1+b1) ... Setting up libfuture-perl (0.39-1) ... Setting up libcgi-pm-perl (4.40-1) ... Setting up libtext-levenshtein-perl (0.13-1) ... Setting up libio-async-perl (0.72-1) ... Setting up patchutils (0.3.4-2) ... Setting up libdigest-hmac-perl (1.03+dfsg-2) ... Setting up libipc-system-simple-perl (1.25-4) ... Setting up libnet-domain-tld-perl (1.75-1) ... Setting up t1utils (1.41-3) ... Setting up diffstat (1.62-1) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up libcapture-tiny-perl (0.48-1) ... Setting up libsub-name-perl (0.21-1+b3) ... Setting up libpath-tiny-perl (0.108-1) ... Setting up libexporter-tiny-perl (1.002001-1) ... Setting up libclass-accessor-perl (0.51-1) ... Setting up libnet-ip-perl (1.26-2) ... Setting up libfile-basedir-perl (0.08-1) ... Setting up liblist-moreutils-perl (0.416-1+b4) ... Setting up libnet-dns-perl (1.19-1) ... Setting up libparse-debianchangelog-perl (1.2.0-13) ... Setting up libemail-valid-perl (1.202-1) ... Setting up lintian (2.9.1) ... Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Processing triggers for man-db (2.8.5-2) ... Not building database; man-db/auto-update is not 'true'. W: biff source: ancient-standards-version 3.7.2 (released 2006-05-03) (current is 4.3.0) W: biff: copyright-refers-to-deprecated-bsd-license-file W: biff: copyright-without-copyright-notice W: biff: description-synopsis-starts-with-article W: biff: priority-extra-is-replaced-by-priority-optional W: biff: command-with-path-in-maintainer-script postinst:4 /usr/sbin/update-inetd W: biff: command-with-path-in-maintainer-script postrm:5 /usr/sbin/update-inetd I: Lintian run was successful. +------------------------------------------------------------------------------+ | Post Build | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup | +------------------------------------------------------------------------------+ Purging /<> Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl uuid-runtime Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl libhtml-format-perl libhttp-daemon-perl libmailtools-perl libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime Use 'apt autoremove' to remove them. The following packages will be REMOVED: autoconf* automake* autopoint* autotools-dev* bsdmainutils* cmake* cmake-data* debhelper* dh-autoreconf* dh-strip-nondeterminism* diffstat* dwz* gcc-8-base:armhf* gettext* gettext-base* groff-base* intltool-debian* libapt-pkg-perl* libarchive-zip-perl* libarchive13* libasan5:armhf* libatomic1:armhf* libbsd0* libc6:armhf* libc6-dev:armhf* libcapture-tiny-perl* libcgi-pm-perl* libclass-accessor-perl* libclone-perl* libcroco3* libcurl4* libdigest-hmac-perl* libelf1* libemail-valid-perl* libexporter-tiny-perl* libfile-basedir-perl* libfile-stripnondeterminism-perl* libfuture-perl* libgcc-8-dev:armhf* libgcc1:armhf* libglib2.0-0* libgomp1:armhf* libgssapi-krb5-2* libio-async-perl* libio-pty-perl* libipc-run-perl* libipc-system-simple-perl* libjsoncpp1* libk5crypto3* libkeyutils1* libkrb5-3* libkrb5support0* liblist-moreutils-perl* libncurses6* libnet-dns-perl* libnet-domain-tld-perl* libnet-ip-perl* libnghttp2-14* libparse-debianchangelog-perl* libpath-tiny-perl* libpipeline1* libprocps7* libpsl5* librhash0* librtmp1* libsigsegv2* libssh2-1* libstdc++-8-dev:armhf* libstdc++6:armhf* libstruct-dumb-perl* libsub-name-perl* libtext-levenshtein-perl* libtool* libubsan1:armhf* libuchardet0* libuv1* lintian* linux-libc-dev:armhf* m4* man-db* patchutils* po-debconf* procps* sbuild-build-depends-lintian-dummy:armhf* sbuild-build-depends-main-dummy:armhf* t1utils* 0 upgraded, 0 newly installed, 86 to remove and 0 not upgraded. After this operation, 120 MB disk space will be freed. (Reading database ... 23150 files and directories currently installed.) Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ... Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ... Removing lintian (2.9.1) ... Removing cmake (3.13.4-1) ... Removing cmake-data (3.13.4-1) ... Removing diffstat (1.62-1) ... Removing libstdc++-8-dev:armhf (8.3.0-2) ... Removing libgcc-8-dev:armhf (8.3.0-2) ... Removing libubsan1:armhf (8.3.0-2) ... Removing libasan5:armhf (8.3.0-2) ... Removing libstdc++6:armhf (8.3.0-2) ... Removing libapt-pkg-perl (0.1.34+b1) ... Removing libarchive13:amd64 (3.3.3-4) ... Removing libatomic1:armhf (8.3.0-2) ... Removing libc6-dev:armhf (2.28-7) ... Removing libgomp1:armhf (8.3.0-2) ... Removing libcapture-tiny-perl (0.48-1) ... Removing libparse-debianchangelog-perl (1.2.0-13) ... Removing libcgi-pm-perl (4.40-1) ... Removing libclass-accessor-perl (0.51-1) ... Removing libclone-perl (0.41-1+b1) ... Removing libcurl4:amd64 (7.64.0-1) ... Removing libemail-valid-perl (1.202-1) ... Removing libnet-dns-perl (1.19-1) ... Removing libdigest-hmac-perl (1.03+dfsg-2) ... Removing liblist-moreutils-perl (0.416-1+b4) ... Removing libexporter-tiny-perl (1.002001-1) ... Removing libfile-basedir-perl (0.08-1) ... Removing libio-async-perl (0.72-1) ... Removing libfuture-perl (0.39-1) ... Removing libgssapi-krb5-2:amd64 (1.17-2) ... Removing libipc-run-perl (20180523.0-1) ... Removing libio-pty-perl (1:1.08-1.1+b5) ... Removing libipc-system-simple-perl (1.25-4) ... Removing libjsoncpp1:amd64 (1.7.4-3) ... Removing libkrb5-3:amd64 (1.17-2) ... Removing libk5crypto3:amd64 (1.17-2) ... Removing libkrb5support0:amd64 (1.17-2) ... Removing libkeyutils1:amd64 (1.6-4) ... Removing procps (2:3.3.15-2) ... Removing libnet-domain-tld-perl (1.75-1) ... Removing libnet-ip-perl (1.26-2) ... Removing libnghttp2-14:amd64 (1.36.0-2) ... Removing libpath-tiny-perl (0.108-1) ... Removing libprocps7:amd64 (2:3.3.15-2) ... Removing libpsl5:amd64 (0.20.2-2) ... Removing librhash0:amd64 (1.3.8-1) ... Removing librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2) ... Removing libssh2-1:amd64 (1.8.0-2) ... Removing libstruct-dumb-perl (0.09-1) ... Removing libsub-name-perl (0.21-1+b3) ... Removing libtext-levenshtein-perl (0.13-1) ... Removing libuv1:amd64 (1.24.1-1) ... Removing linux-libc-dev:armhf (4.19.20-1) ... Removing patchutils (0.3.4-2) ... Removing t1utils (1.41-3) ... Removing libgcc1:armhf (1:8.3.0-2) ... Removing debhelper (12.1.1) ... Removing dh-strip-nondeterminism (1.1.1-1) ... Removing man-db (2.8.5-2) ... Removing bsdmainutils (11.1.2+b1) ... Removing dwz (0.12-3) ... Removing gcc-8-base:armhf (8.3.0-2) ... Removing po-debconf (1.0.21) ... Removing intltool-debian (0.35.0+20060710.5) ... Removing gettext (0.19.8.1-9) ... Removing gettext-base (0.19.8.1-9) ... Removing groff-base (1.22.4-2) ... Removing libfile-stripnondeterminism-perl (1.1.1-1) ... Removing libarchive-zip-perl (1.64-1) ... Removing libbsd0:amd64 (0.9.1-2) ... Removing libc6:armhf (2.28-7) ... Removing libcroco3:amd64 (0.6.12-3) ... Removing libelf1:amd64 (0.176-1) ... Removing libglib2.0-0:amd64 (2.58.3-1) ... Removing libncurses6:amd64 (6.1+20181013-2) ... Removing libpipeline1:amd64 (1.5.1-2) ... Removing libuchardet0:amd64 (0.0.6-3) ... Removing dh-autoreconf (19) ... Removing automake (1:1.16.1-4) ... Removing autoconf (2.69-11) ... Removing autopoint (0.19.8.1-9) ... Removing libtool (2.4.6-10) ... Removing autotools-dev (20180224.1) ... Removing m4 (1.4.18-2) ... Removing libsigsegv2:amd64 (2.12-2) ... Processing triggers for ccache (3.6-1) ... Updating symlinks in /usr/lib/ccache ... Processing triggers for libc-bin (2.28-7) ... (Reading database ... 16464 files and directories currently installed.) Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ... Purging configuration files for lintian (2.9.1) ... Purging configuration files for man-db (2.8.5-2) ... Purging configuration files for bsdmainutils (11.1.2+b1) ... Purging configuration files for libgssapi-krb5-2:amd64 (1.17-2) ... Purging configuration files for autoconf (2.69-11) ... Purging configuration files for libc6:armhf (2.28-7) ... Purging configuration files for groff-base (1.22.4-2) ... Purging configuration files for procps (2:3.3.15-2) ... Purging configuration files for cmake-data (3.13.4-1) ... +------------------------------------------------------------------------------+ | Summary | +------------------------------------------------------------------------------+ Build Architecture: amd64 Build Profiles: cross nocheck Build Type: any Build-Space: n/a Build-Time: 7 Distribution: unstable-amd64-sbuild Foreign Architectures: armhf Host Architecture: armhf Install-Time: 9 Job: /home/build/sbuild-setup/repo/pool/main/b/biff/biff_0.17.pre20000412-5.1.dsc Lintian: warn Machine Architecture: amd64 Package: biff Package-Time: 20 Source-Version: 1:0.17.pre20000412-5.1 Space: n/a Status: successful Version: 1:0.17.pre20000412-5.1 -------------------------------------------------------------------------------- Finished at 2019-03-01T07:26:26Z Build needed 00:00:20, no disk space