sbuild (Debian sbuild) 0.78.1 (09 February 2019) on 36857dea695f

+==============================================================================+
| iat 0.1.3-7 (armhf)                          Mon, 04 Mar 2019 13:27:53 +0000 |
+==============================================================================+

Package: iat
Version: 0.1.3-7
Source Version: 0.1.3-7
Distribution: unstable-amd64-sbuild
Machine Architecture: amd64
Host Architecture: armhf
Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any

I: NOTICE: Log filtering will replace 'var/run/schroot/mount/unstable-amd64-sbuild-7b8799ac-91c9-401a-873f-952ef805b6d8' with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/iat-nQtcXF/resolver-pbfxJy' with '<<RESOLVERDIR>>'

+------------------------------------------------------------------------------+
| Update chroot                                                                |
+------------------------------------------------------------------------------+

Hit:1 http://10.116.41.102/debian sid InRelease
Hit:2 http://cdn-fastly.deb.debian.org/debian sid InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl libmailtools-perl
  libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

+------------------------------------------------------------------------------+
| Fetch source files                                                           |
+------------------------------------------------------------------------------+


Local sources
-------------

/home/build/sbuild-setup/repo/pool/main/i/iat/iat_0.1.3-7.dsc exists in /home/build/sbuild-setup/repo/pool/main/i/iat; copying to chroot
I: NOTICE: Log filtering will replace 'build/iat-nQtcXF/iat-0.1.3' with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/iat-nQtcXF' with '<<BUILDDIR>>'

+------------------------------------------------------------------------------+
| Install package build dependencies                                           |
+------------------------------------------------------------------------------+


Setup apt archive
-----------------

Merged Build-Depends: debhelper (>= 5), build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
Filtered Build-Depends: debhelper (>= 5), build-essential:amd64, fakeroot:amd64, crossbuild-essential-armhf:amd64, libc-dev:armhf, libstdc++-dev:armhf
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [957 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [394 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [481 B]
Fetched 1832 B in 0s (164 kB/s)
Reading package lists...
Reading package lists...

Install main build dependencies (apt-based resolver)
----------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl libmailtools-perl
  libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
  autoconf automake autopoint autotools-dev bsdmainutils debhelper
  dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext
  gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf
  libatomic1:armhf libbsd0 libc6:armhf libc6-dev:armhf libcroco3 libelf1
  libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf
  libglib2.0-0 libgomp1:armhf libncurses6 libpipeline1 libsigsegv2
  libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0
  linux-libc-dev:armhf m4 man-db po-debconf
Suggested packages:
  autoconf-archive gnu-standards autoconf-doc wamerican | wordlist whois
  vacation dh-make gettext-doc libasprintf-dev libgettextpo-dev groff
  glibc-doc:armhf libc-l10n:armhf locales:armhf manpages-dev:armhf
  libstdc++-8-doc:armhf libtool-doc gfortran | fortran95-compiler gcj-jdk
  m4-doc apparmor less www-browser libmail-box-perl
Recommended packages:
  curl | wget | lynx libidn2-0:armhf libarchive-cpio-perl libglib2.0-data
  shared-mime-info xdg-user-dirs libgpm2 libltdl-dev libmail-sendmail-perl
The following NEW packages will be installed:
  autoconf automake autopoint autotools-dev bsdmainutils debhelper
  dh-autoreconf dh-strip-nondeterminism dwz gcc-8-base:armhf gettext
  gettext-base groff-base intltool-debian libarchive-zip-perl libasan5:armhf
  libatomic1:armhf libbsd0 libc6:armhf libc6-dev:armhf libcroco3 libelf1
  libfile-stripnondeterminism-perl libgcc-8-dev:armhf libgcc1:armhf
  libglib2.0-0 libgomp1:armhf libncurses6 libpipeline1 libsigsegv2
  libstdc++-8-dev:armhf libstdc++6:armhf libtool libubsan1:armhf libuchardet0
  linux-libc-dev:armhf m4 man-db po-debconf
  sbuild-build-depends-main-dummy:armhf
0 upgraded, 40 newly installed, 0 to remove and 0 not upgraded.
Need to get 900 B/18.5 MB of archives.
After this operation, 79.1 MB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [900 B]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 900 B in 0s (0 B/s)
Selecting previously unselected package libbsd0:amd64.
(Reading database ... 16440 files and directories currently installed.)
Preparing to unpack .../00-libbsd0_0.9.1-2_amd64.deb ...
Unpacking libbsd0:amd64 (0.9.1-2) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../01-bsdmainutils_11.1.2+b1_amd64.deb ...
Unpacking bsdmainutils (11.1.2+b1) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../02-libuchardet0_0.0.6-3_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.6-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../03-groff-base_1.22.4-2_amd64.deb ...
Unpacking groff-base (1.22.4-2) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../04-libpipeline1_1.5.1-2_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.1-2) ...
Selecting previously unselected package man-db.
Preparing to unpack .../05-man-db_2.8.5-2_amd64.deb ...
Unpacking man-db (2.8.5-2) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../06-gettext-base_0.19.8.1-9_amd64.deb ...
Unpacking gettext-base (0.19.8.1-9) ...
Selecting previously unselected package libsigsegv2:amd64.
Preparing to unpack .../07-libsigsegv2_2.12-2_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.12-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../08-m4_1.4.18-2_amd64.deb ...
Unpacking m4 (1.4.18-2) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../09-autoconf_2.69-11_all.deb ...
Unpacking autoconf (2.69-11) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../10-autotools-dev_20180224.1_all.deb ...
Unpacking autotools-dev (20180224.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../11-automake_1%3a1.16.1-4_all.deb ...
Unpacking automake (1:1.16.1-4) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../12-autopoint_0.19.8.1-9_all.deb ...
Unpacking autopoint (0.19.8.1-9) ...
Selecting previously unselected package libtool.
Preparing to unpack .../13-libtool_2.4.6-10_all.deb ...
Unpacking libtool (2.4.6-10) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../14-dh-autoreconf_19_all.deb ...
Unpacking dh-autoreconf (19) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../15-libarchive-zip-perl_1.64-1_all.deb ...
Unpacking libarchive-zip-perl (1.64-1) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../16-libfile-stripnondeterminism-perl_1.1.1-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.1.1-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../17-dh-strip-nondeterminism_1.1.1-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.1.1-1) ...
Selecting previously unselected package libelf1:amd64.
Preparing to unpack .../18-libelf1_0.176-1_amd64.deb ...
Unpacking libelf1:amd64 (0.176-1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../19-dwz_0.12-3_amd64.deb ...
Unpacking dwz (0.12-3) ...
Selecting previously unselected package libglib2.0-0:amd64.
Preparing to unpack .../20-libglib2.0-0_2.58.3-1_amd64.deb ...
Unpacking libglib2.0-0:amd64 (2.58.3-1) ...
Selecting previously unselected package libcroco3:amd64.
Preparing to unpack .../21-libcroco3_0.6.12-3_amd64.deb ...
Unpacking libcroco3:amd64 (0.6.12-3) ...
Selecting previously unselected package libncurses6:amd64.
Preparing to unpack .../22-libncurses6_6.1+20181013-2_amd64.deb ...
Unpacking libncurses6:amd64 (6.1+20181013-2) ...
Selecting previously unselected package gettext.
Preparing to unpack .../23-gettext_0.19.8.1-9_amd64.deb ...
Unpacking gettext (0.19.8.1-9) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../24-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../25-po-debconf_1.0.21_all.deb ...
Unpacking po-debconf (1.0.21) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../26-debhelper_12.1.1_all.deb ...
Unpacking debhelper (12.1.1) ...
Selecting previously unselected package gcc-8-base:armhf.
Preparing to unpack .../27-gcc-8-base_8.3.0-2_armhf.deb ...
Unpacking gcc-8-base:armhf (8.3.0-2) ...
Selecting previously unselected package libgcc1:armhf.
Preparing to unpack .../28-libgcc1_1%3a8.3.0-2_armhf.deb ...
Unpacking libgcc1:armhf (1:8.3.0-2) ...
Selecting previously unselected package libc6:armhf.
Preparing to unpack .../29-libc6_2.28-7_armhf.deb ...
Unpacking libc6:armhf (2.28-7) ...
Selecting previously unselected package libstdc++6:armhf.
Preparing to unpack .../30-libstdc++6_8.3.0-2_armhf.deb ...
Unpacking libstdc++6:armhf (8.3.0-2) ...
Selecting previously unselected package libasan5:armhf.
Preparing to unpack .../31-libasan5_8.3.0-2_armhf.deb ...
Unpacking libasan5:armhf (8.3.0-2) ...
Selecting previously unselected package libatomic1:armhf.
Preparing to unpack .../32-libatomic1_8.3.0-2_armhf.deb ...
Unpacking libatomic1:armhf (8.3.0-2) ...
Selecting previously unselected package linux-libc-dev:armhf.
Preparing to unpack .../33-linux-libc-dev_4.19.20-1_armhf.deb ...
Unpacking linux-libc-dev:armhf (4.19.20-1) ...
Selecting previously unselected package libc6-dev:armhf.
Preparing to unpack .../34-libc6-dev_2.28-7_armhf.deb ...
Unpacking libc6-dev:armhf (2.28-7) ...
Selecting previously unselected package libgomp1:armhf.
Preparing to unpack .../35-libgomp1_8.3.0-2_armhf.deb ...
Unpacking libgomp1:armhf (8.3.0-2) ...
Selecting previously unselected package libubsan1:armhf.
Preparing to unpack .../36-libubsan1_8.3.0-2_armhf.deb ...
Unpacking libubsan1:armhf (8.3.0-2) ...
Selecting previously unselected package libgcc-8-dev:armhf.
Preparing to unpack .../37-libgcc-8-dev_8.3.0-2_armhf.deb ...
Unpacking libgcc-8-dev:armhf (8.3.0-2) ...
Selecting previously unselected package libstdc++-8-dev:armhf.
Preparing to unpack .../38-libstdc++-8-dev_8.3.0-2_armhf.deb ...
Unpacking libstdc++-8-dev:armhf (8.3.0-2) ...
Selecting previously unselected package sbuild-build-depends-main-dummy:armhf.
Preparing to unpack .../39-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Setting up libpipeline1:amd64 (1.5.1-2) ...
Setting up libarchive-zip-perl (1.64-1) ...
Setting up libglib2.0-0:amd64 (2.58.3-1) ...
No schema files found: doing nothing.
Setting up linux-libc-dev:armhf (4.19.20-1) ...
Setting up gettext-base (0.19.8.1-9) ...
Setting up autotools-dev (20180224.1) ...
Setting up libncurses6:amd64 (6.1+20181013-2) ...
Setting up libsigsegv2:amd64 (2.12-2) ...
Setting up gcc-8-base:armhf (8.3.0-2) ...
Setting up autopoint (0.19.8.1-9) ...
Setting up libcroco3:amd64 (0.6.12-3) ...
Setting up libuchardet0:amd64 (0.0.6-3) ...
Setting up libbsd0:amd64 (0.9.1-2) ...
Setting up libelf1:amd64 (0.176-1) ...
Setting up libfile-stripnondeterminism-perl (1.1.1-1) ...
Setting up gettext (0.19.8.1-9) ...
Setting up libtool (2.4.6-10) ...
Setting up m4 (1.4.18-2) ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up bsdmainutils (11.1.2+b1) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in auto mode
Setting up autoconf (2.69-11) ...
Setting up dwz (0.12-3) ...
Setting up groff-base (1.22.4-2) ...
Setting up automake (1:1.16.1-4) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
Setting up po-debconf (1.0.21) ...
Setting up man-db (2.8.5-2) ...
Not building database; man-db/auto-update is not 'true'.
Setting up libc6:armhf (2.28-7) ...
Setting up libc6-dev:armhf (2.28-7) ...
Setting up libgcc1:armhf (1:8.3.0-2) ...
Setting up libgomp1:armhf (8.3.0-2) ...
Setting up dh-autoreconf (19) ...
Setting up libatomic1:armhf (8.3.0-2) ...
Setting up dh-strip-nondeterminism (1.1.1-1) ...
Setting up libstdc++6:armhf (8.3.0-2) ...
Setting up debhelper (12.1.1) ...
Setting up libasan5:armhf (8.3.0-2) ...
Setting up libubsan1:armhf (8.3.0-2) ...
Setting up libgcc-8-dev:armhf (8.3.0-2) ...
Setting up libstdc++-8-dev:armhf (8.3.0-2) ...
Setting up sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Processing triggers for libc-bin (2.28-7) ...
Processing triggers for ccache (3.6-1) ...
Updating symlinks in /usr/lib/ccache ...

+------------------------------------------------------------------------------+
| Check architectures                                                          |
+------------------------------------------------------------------------------+

Initial Foreign Architectures: armhf 
Arch check ok (armhf included in any)

+------------------------------------------------------------------------------+
| Build environment                                                            |
+------------------------------------------------------------------------------+

Kernel: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) amd64 (x86_64)
Toolchain package versions: binutils_2.31.1-14 dpkg-dev_1.19.5 g++-8_8.3.0-2 gcc-8_8.3.0-2 libc6-dev_2.28-7 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 linux-libc-dev_4.19.20-1
Package versions: adduser_3.118 apt_1.8.0~rc4 autoconf_2.69-11 automake_1:1.16.1-4 autopoint_0.19.8.1-9 autotools-dev_20180224.1 base-files_10.1 base-passwd_3.5.46 bash_5.0-2 binutils_2.31.1-14 binutils-arm-linux-gnueabihf_2.31.1-14 binutils-common_2.31.1-14 binutils-x86-64-linux-gnu_2.31.1-14 bsdmainutils_11.1.2+b1 bsdutils_1:2.33.1-0.1 build-essential_12.5 bzip2_1.0.6-9 ca-certificates_20190110 ccache_3.6-1 coreutils_8.30-2 cpp_4:8.2.0-2 cpp-8_8.3.0-2 cpp-8-arm-linux-gnueabihf_8.2.0-20cross1 cpp-arm-linux-gnueabihf_4:8.2.0-2 cross-config_2.6.15-2 crossbuild-essential-armhf_12.5 dash_0.5.10.2-5 debconf_1.5.71 debhelper_12.1.1 debian-archive-keyring_2018.1 debianutils_4.8.6.1 dh-autoreconf_19 dh-strip-nondeterminism_1.1.1-1 diffutils_1:3.7-2 dirmngr_2.2.12-1 dpkg_1.19.5 dpkg-cross_2.6.15-2 dpkg-dev_1.19.5 dwz_0.12-3 e2fsprogs_1.44.5-1 eatmydata_105-7 fakeroot_1.23-1 fdisk_2.33.1-0.1 file_1:5.35-2 findutils_4.6.0+git+20190209-2 g++_4:8.2.0-2 g++-8_8.3.0-2 g++-8-arm-linux-gnueabihf_8.2.0-20cross1 g++-arm-linux-gnueabihf_4:8.2.0-2 gcc_4:8.2.0-2 gcc-8_8.3.0-2 gcc-8-arm-linux-gnueabihf_8.2.0-20cross1 gcc-8-arm-linux-gnueabihf-base_8.2.0-20cross1 gcc-8-base_8.3.0-2 gcc-8-cross-base_8.2.0-20cross1 gcc-arm-linux-gnueabihf_4:8.2.0-2 gettext_0.19.8.1-9 gettext-base_0.19.8.1-9 gnupg_2.2.12-1 gnupg-l10n_2.2.12-1 gnupg-utils_2.2.12-1 gpg_2.2.12-1 gpg-agent_2.2.12-1 gpg-wks-client_2.2.12-1 gpg-wks-server_2.2.12-1 gpgconf_2.2.12-1 gpgsm_2.2.12-1 gpgv_2.2.12-1 grep_3.3-1 groff-base_1.22.4-2 gzip_1.9-3 hostname_3.21 init-system-helpers_1.56+nmu1 intltool-debian_0.35.0+20060710.5 libacl1_2.2.52-5 libapt-pkg5.0_1.8.0~rc4 libarchive-zip-perl_1.64-1 libasan5_8.3.0-2 libasan5-armhf-cross_8.2.0-20cross1 libassuan0_2.5.2-1 libatomic1_8.3.0-2 libatomic1-armhf-cross_8.2.0-20cross1 libattr1_1:2.4.47-4 libaudit-common_1:2.8.4-2 libaudit1_1:2.8.4-2 libauthen-sasl-perl_2.1600-1 libbinutils_2.31.1-14 libblkid1_2.33.1-0.1 libbsd0_0.9.1-2 libbz2-1.0_1.0.6-9 libc-bin_2.28-7 libc-dev-bin_2.28-7 libc6_2.28-7 libc6-armhf-cross_2.28-4cross1 libc6-dev_2.28-7 libc6-dev-armhf-cross_2.28-4cross1 libcap-ng0_0.7.9-2 libcc1-0_8.3.0-2 libcom-err2_1.44.5-1 libconfig-auto-perl_0.44-1 libconfig-inifiles-perl_3.000001-1 libcroco3_0.6.12-3 libdata-dump-perl_1.23-1 libdb5.3_5.3.28+dfsg1-0.5 libdebconfclient0_0.247 libdebian-dpkgcross-perl_2.6.15-2 libdpkg-perl_1.19.5 libeatmydata1_105-7 libelf1_0.176-1 libencode-locale-perl_1.05-1 libexpat1_2.2.6-1 libext2fs2_1.44.5-1 libfakeroot_1.23-1 libfdisk1_2.33.1-0.1 libffi6_3.2.1-9 libfile-homedir-perl_1.004-1 libfile-listing-perl_6.04-1 libfile-stripnondeterminism-perl_1.1.1-1 libfile-which-perl_1.23-1 libfont-afm-perl_1.20-2 libgcc-8-dev_8.3.0-2 libgcc-8-dev-armhf-cross_8.2.0-20cross1 libgcc1_1:8.3.0-2 libgcc1-armhf-cross_1:8.2.0-20cross1 libgcrypt20_1.8.4-5 libgdbm-compat4_1.18.1-3 libgdbm6_1.18.1-3 libglib2.0-0_2.58.3-1 libgmp10_2:6.1.2+dfsg-4 libgnutls30_3.6.6-2 libgomp1_8.3.0-2 libgomp1-armhf-cross_8.2.0-20cross1 libgpg-error0_1.35-1 libhogweed4_3.4.1-1 libhtml-form-perl_6.03-1 libhtml-format-perl_2.12-1 libhtml-parser-perl_3.72-3+b3 libhtml-tagset-perl_3.20-3 libhtml-tree-perl_5.07-2 libhttp-cookies-perl_6.04-1 libhttp-daemon-perl_6.01-1 libhttp-date-perl_6.02-1 libhttp-message-perl_6.18-1 libhttp-negotiate-perl_6.01-1 libicu63_63.1-6 libidn2-0_2.0.5-1 libio-html-perl_1.001-1 libio-socket-ssl-perl_2.060-3 libio-string-perl_1.08-3 libisl19_0.20-2 libitm1_8.3.0-2 libksba8_1.3.5-2 libldap-2.4-2_2.4.47+dfsg-3 libldap-common_2.4.47+dfsg-3 liblocale-gettext-perl_1.07-3+b4 liblsan0_8.3.0-2 liblwp-mediatypes-perl_6.02-1 liblwp-protocol-https-perl_6.07-2 liblz4-1_1.8.3-1 liblzma5_5.2.4-1 libmagic-mgc_1:5.35-2 libmagic1_1:5.35-2 libmailtools-perl_2.18-1 libmount1_2.33.1-0.1 libmpc3_1.1.0-1 libmpfr6_4.0.2-1 libmpx2_8.3.0-2 libncurses6_6.1+20181013-2 libncursesw6_6.1+20181013-2 libnet-http-perl_6.18-1 libnet-smtp-ssl-perl_1.04-1 libnet-ssleay-perl_1.85-2+b1 libnettle6_3.4.1-1 libnpth0_1.6-1 libp11-kit0_0.23.15-2 libpam-modules_1.3.1-5 libpam-modules-bin_1.3.1-5 libpam-runtime_1.3.1-5 libpam0g_1.3.1-5 libpcre3_2:8.39-11 libperl5.28_5.28.1-4 libpipeline1_1.5.1-2 libquadmath0_8.3.0-2 libreadline7_7.0-5 libsasl2-2_2.1.27+dfsg-1 libsasl2-modules-db_2.1.27+dfsg-1 libseccomp2_2.3.3-4 libselinux1_2.8-1+b1 libsemanage-common_2.8-2 libsemanage1_2.8-2 libsepol1_2.8-1 libsigsegv2_2.12-2 libsmartcols1_2.33.1-0.1 libsqlite3-0_3.27.2-1 libss2_1.44.5-1 libssl1.1_1.1.1b-1 libstdc++-8-dev_8.3.0-2 libstdc++-8-dev-armhf-cross_8.2.0-20cross1 libstdc++6_8.3.0-2 libstdc++6-armhf-cross_8.2.0-20cross1 libsystemd0_241-1 libtasn1-6_4.13-3 libtimedate-perl_2.3000-2 libtinfo6_6.1+20181013-2 libtool_2.4.6-10 libtry-tiny-perl_0.30-1 libtsan0_8.3.0-2 libubsan1_8.3.0-2 libubsan1-armhf-cross_8.2.0-20cross1 libuchardet0_0.0.6-3 libudev1_241-1 libunistring2_0.9.10-1 liburi-perl_1.76-1 libuuid1_2.33.1-0.1 libwww-perl_6.36-1 libwww-robotrules-perl_6.02-1 libxml-libxml-perl_2.0134+dfsg-1 libxml-namespacesupport-perl_1.12-1 libxml-parser-perl_2.44-3 libxml-sax-base-perl_1.09-1 libxml-sax-expat-perl_0.51-1 libxml-sax-perl_1.00+dfsg-1 libxml-simple-perl_2.25-1 libxml2_2.9.4+dfsg1-7+b3 libyaml-0-2_0.2.1-1 libyaml-libyaml-perl_0.76+repack-1 libyaml-perl_1.27-1 libzstd1_1.3.8+dfsg-3 linux-libc-dev_4.19.20-1 linux-libc-dev-armhf-cross_4.19.13-1cross1 login_1:4.5-1.1 lsb-base_10.2018112800 m4_1.4.18-2 make_4.2.1-1.2 man-db_2.8.5-2 mawk_1.3.3-17+b3 mount_2.33.1-0.1 ncurses-base_6.1+20181013-2 ncurses-bin_6.1+20181013-2 netbase_5.6 openssl_1.1.1b-1 passwd_1:4.5-1.1 patch_2.7.6-3 perl_5.28.1-4 perl-base_5.28.1-4 perl-modules-5.28_5.28.1-4 perl-openssl-defaults_3 pinentry-curses_1.1.0-1+b1 po-debconf_1.0.21 readline-common_7.0-5 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.7-1 sensible-utils_0.0.12 sysvinit-utils_2.93-8 tar_1.30+dfsg-5 tzdata_2018i-1 ucf_3.0038+nmu1 util-linux_2.33.1-0.1 uuid-runtime_2.33.1-0.1 xz-utils_5.2.4-1 zlib1g_1:1.2.11.dfsg-1

+------------------------------------------------------------------------------+
| Build                                                                        |
+------------------------------------------------------------------------------+


Unpack source
-------------

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.0
Source: iat
Binary: iat
Architecture: any
Version: 0.1.3-7
Maintainer: Dmitry E. Oboukhov <unera@debian.org>
Standards-Version: 3.7.3
Build-Depends: debhelper (>= 5)
Files: 
 c5300439d02a4c592bd9cf72b2033a2e 118145 iat_0.1.3.orig.tar.gz
 afc4b1de62999463bf13a274243e5e08 7798 iat_0.1.3-7.diff.gz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFIP3pgq4wAz/jiZTcRAulYAJ99Q/aoMkc87Ol+W0qCH63plta7uQCgrqEx
PaAeHz8hR9jnNh4Wcnec7Qc=
=H/3/
-----END PGP SIGNATURE-----

gpgv: unknown type of key resource 'trustedkeys.kbx'
gpgv: keyblock resource '/sbuild-nonexistent/.gnupg/trustedkeys.kbx': General error
gpgv: Signature made Fri May 30 03:54:08 2008 UTC
gpgv:                using DSA key AB8C00CFF8E26537
gpgv: Can't check signature: No public key
dpkg-source: warning: failed to verify signature on ./iat_0.1.3-7.dsc
dpkg-source: warning: source package uses only weak checksums
dpkg-source: info: extracting iat in /<<PKGBUILDDIR>>
dpkg-source: info: unpacking iat_0.1.3.orig.tar.gz
dpkg-source: info: applying iat_0.1.3-7.diff.gz
dpkg-source: info: upstream files that have been modified: 
 /<<PKGBUILDDIR>>/Makefile.in
 /<<PKGBUILDDIR>>/src/Makefile.am
 /<<PKGBUILDDIR>>/src/Makefile.in
 /<<PKGBUILDDIR>>/src/iat.1
 /<<PKGBUILDDIR>>/src/iat.c

Check disk space
----------------

Sufficient free space for build

User Environment
----------------

APT_CONFIG=/var/lib/sbuild/apt.conf
CCACHE_COMPRESS=1
CCACHE_DIR=/var/cache/ccache-sbuild
CCACHE_UMASK=002
CONFIG_SITE=/etc/dpkg-cross/cross-config.armhf
DEB_BUILD_OPTIONS=nocheck
HOME=/sbuild-nonexistent
LANG=en_US.UTF-8
LC_ALL=C.UTF-8
LD_LIBRARY_PATH=/usr/lib/libeatmydata
LD_PRELOAD=libeatmydata.so
LOGNAME=build
PATH=/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PWD=/<<PKGBUILDDIR>>
SCHROOT_ALIAS_NAME=unstable-amd64-sbuild
SCHROOT_CHROOT_NAME=unstable-amd64-sbuild
SCHROOT_COMMAND=env
SCHROOT_GID=1000
SCHROOT_GROUP=build
SCHROOT_SESSION_ID=unstable-amd64-sbuild-7b8799ac-91c9-401a-873f-952ef805b6d8
SCHROOT_UID=1000
SCHROOT_USER=build
SHELL=/bin/sh
USER=build

dpkg-buildpackage
-----------------

Command: dpkg-buildpackage -aarmhf -Pcross,nocheck -us -uc -B -rfakeroot -j16
dpkg-buildpackage: info: source package iat
dpkg-buildpackage: info: source version 0.1.3-7
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Dmitry E. Oboukhov <unera@debian.org>
dpkg-architecture: warning: specified GNU system type arm-linux-gnueabihf does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
 dpkg-source --before-build .
dpkg-buildpackage: info: host architecture armhf
 fakeroot debian/rules clean
dh_testdir
dh_testroot
[ ! -f Makefile ] || [ ! -f config.status ] || /usr/bin/make distclean
rm -f config-stamp build-stamp
dh_clean 
dh_clean: Compatibility levels before 9 are deprecated (level 5 in use)
dpkg-buildpackage: warning: debian/rules must be updated to support the 'build-arch' and 'build-indep' targets (at least 'build-arch' seems to be missing)
 debian/rules build
dh_testdir
./configure --host=arm-linux-gnueabihf --build=x86_64-linux-gnu --prefix=/usr --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info CFLAGS="-Wall -g -O2" LDFLAGS="-Wl,-z,defs" 2>&1 | tee config-stamp
configure: loading site script /etc/dpkg-cross/cross-config.armhf
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for arm-linux-gnueabihf-strip... arm-linux-gnueabihf-strip
checking for arm-linux-gnueabihf-gcc... arm-linux-gnueabihf-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... yes
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether arm-linux-gnueabihf-gcc accepts -g... yes
checking for arm-linux-gnueabihf-gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of arm-linux-gnueabihf-gcc... gcc3
checking how to run the C preprocessor... arm-linux-gnueabihf-gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for working memcmp... no
checking for strerror... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
dh_testdir
/usr/bin/make
make[1]: Entering directory '/<<PKGBUILDDIR>>'
/usr/bin/make  all-recursive
make[2]: Entering directory '/<<PKGBUILDDIR>>'
Making all in src
make[3]: Entering directory '/<<PKGBUILDDIR>>/src'
if arm-linux-gnueabihf-gcc -DHAVE_CONFIG_H -I. -I. -I..    -D_FILE_OFFSET_BITS=64 -Wall -Wall -g -O2 -MT iat.o -MD -MP -MF ".deps/iat.Tpo" -c -o iat.o iat.c; \
then mv -f ".deps/iat.Tpo" ".deps/iat.Po"; else rm -f ".deps/iat.Tpo"; exit 1; fi
arm-linux-gnueabihf-gcc -D_FILE_OFFSET_BITS=64 -Wall -Wall -g -O2  -Wl,-z,defs -o iat  iat.o  
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[3]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Leaving directory '/<<PKGBUILDDIR>>'
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
touch build-stamp
 fakeroot debian/rules binary-arch
dh_testdir
dh_testroot
dh_clean -k 
dh_clean: Compatibility levels before 9 are deprecated (level 5 in use)
dh_clean: dh_clean -k is deprecated; use dh_prep instead
dh_clean: This feature will be removed in compat 12.
dh_installdirs
dh_installdirs: Compatibility levels before 9 are deprecated (level 5 in use)
/usr/bin/make DESTDIR=/<<PKGBUILDDIR>>/debian/iat install
make[1]: Entering directory '/<<PKGBUILDDIR>>'
Making install in src
make[2]: Entering directory '/<<PKGBUILDDIR>>/src'
make[3]: Entering directory '/<<PKGBUILDDIR>>/src'
test -z "/usr/bin" || mkdir -p -- "/<<PKGBUILDDIR>>/debian/iat/usr/bin"
test -z "/usr/share/man/man1" || mkdir -p -- "/<<PKGBUILDDIR>>/debian/iat/usr/share/man/man1"
  /usr/bin/install -c 'iat' '/<<PKGBUILDDIR>>/debian/iat/usr/bin/iat'
 /usr/bin/install -c -m 644 './iat.1' '/<<PKGBUILDDIR>>/debian/iat/usr/share/man/man1/iat.1'
make[3]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[2]: Leaving directory '/<<PKGBUILDDIR>>/src'
make[2]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Entering directory '/<<PKGBUILDDIR>>'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/<<PKGBUILDDIR>>'
make[2]: Leaving directory '/<<PKGBUILDDIR>>'
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_testdir
dh_testroot
dh_installchangelogs ChangeLog
dh_installdocs
dh_installdocs: Compatibility levels before 9 are deprecated (level 5 in use)
dh_installexamples
dh_installexamples: Compatibility levels before 9 are deprecated (level 5 in use)
dh_strip
dh_strip: Compatibility levels before 9 are deprecated (level 5 in use)
dh_compress
dh_compress: Compatibility levels before 9 are deprecated (level 5 in use)
dh_fixperms
dh_installdeb
dh_installdeb: Compatibility levels before 9 are deprecated (level 5 in use)
dh_shlibdeps
dh_shlibdeps: Compatibility levels before 9 are deprecated (level 5 in use)
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package 'iat' in '../iat_0.1.3-7_armhf.deb'.
dpkg-deb: building package 'iat-dbgsym' in '../iat-dbgsym_0.1.3-7_armhf.deb'.
 dpkg-genbuildinfo --build=any
 dpkg-genchanges --build=any >../iat_0.1.3-7_armhf.changes
dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included)
 dpkg-source --after-build .
dpkg-buildpackage: info: binary-only upload (no source included)
--------------------------------------------------------------------------------
Build finished at 2019-03-04T13:28:10Z

Finished
--------

I: Built successfully

+------------------------------------------------------------------------------+
| Changes                                                                      |
+------------------------------------------------------------------------------+


iat_0.1.3-7_armhf.changes:
--------------------------

Format: 1.8
Date: Fri, 30 May 2008 07:53:00 +0400
Source: iat
Binary: iat iat-dbgsym
Built-For-Profiles: cross nocheck
Architecture: armhf
Version: 0.1.3-7
Distribution: unstable-amd64-sbuild
Urgency: low
Maintainer: Dmitry E. Oboukhov <unera@debian.org>
Changed-By: Dmitry E. Oboukhov <unera@debian.org>
Description:
 iat        - Converts many CD-ROM image formats to iso9660
Changes:
 iat (0.1.3-7) unstable; urgency=low
 .
   * My email address has been changed.
Checksums-Sha1:
 994ed358377723ee05fda0ffff945a01532a3f5f 7824 iat-dbgsym_0.1.3-7_armhf.deb
 dcf1bc7ed7ec5e83dbd3e67395515e9fea1606c4 4421 iat_0.1.3-7_armhf.buildinfo
 9b418d81e176b99f97308e9350d1c0ddf284f098 6908 iat_0.1.3-7_armhf.deb
Checksums-Sha256:
 89e8ade0881b41e749f6e4ef22983f20e96778c774a8a612205dc70681b558a7 7824 iat-dbgsym_0.1.3-7_armhf.deb
 1e2393efdbfbcd13078d7b66882352f5c9380f8a049842addac22acd82998b35 4421 iat_0.1.3-7_armhf.buildinfo
 f39835c3d7345deb4048daead0fde572c72439cf1976ecf9c33fe2157dcdfde9 6908 iat_0.1.3-7_armhf.deb
Files:
 6b02bdfa03c1706a0e151d86bbbc295c 7824 debug optional iat-dbgsym_0.1.3-7_armhf.deb
 1bb02d053616d8d82a599c793e2b45c5 4421 otherosfs extra iat_0.1.3-7_armhf.buildinfo
 4133c99bbb4e667d3dd9b7591e7c81d6 6908 otherosfs extra iat_0.1.3-7_armhf.deb

+------------------------------------------------------------------------------+
| Buildinfo                                                                    |
+------------------------------------------------------------------------------+

Format: 1.0
Source: iat
Binary: iat
Architecture: armhf
Version: 0.1.3-7
Checksums-Md5:
 6b02bdfa03c1706a0e151d86bbbc295c 7824 iat-dbgsym_0.1.3-7_armhf.deb
 4133c99bbb4e667d3dd9b7591e7c81d6 6908 iat_0.1.3-7_armhf.deb
Checksums-Sha1:
 994ed358377723ee05fda0ffff945a01532a3f5f 7824 iat-dbgsym_0.1.3-7_armhf.deb
 9b418d81e176b99f97308e9350d1c0ddf284f098 6908 iat_0.1.3-7_armhf.deb
Checksums-Sha256:
 89e8ade0881b41e749f6e4ef22983f20e96778c774a8a612205dc70681b558a7 7824 iat-dbgsym_0.1.3-7_armhf.deb
 f39835c3d7345deb4048daead0fde572c72439cf1976ecf9c33fe2157dcdfde9 6908 iat_0.1.3-7_armhf.deb
Build-Origin: Debian
Build-Architecture: amd64
Build-Date: Mon, 04 Mar 2019 13:28:10 +0000
Build-Path: /<<PKGBUILDDIR>>
Installed-Build-Depends:
 autoconf (= 2.69-11),
 automake (= 1:1.16.1-4),
 autopoint (= 0.19.8.1-9),
 autotools-dev (= 20180224.1),
 base-files (= 10.1),
 base-passwd (= 3.5.46),
 bash (= 5.0-2),
 binutils (= 2.31.1-14),
 binutils-common (= 2.31.1-14),
 binutils-x86-64-linux-gnu (= 2.31.1-14),
 bsdmainutils (= 11.1.2+b1),
 bsdutils (= 1:2.33.1-0.1),
 build-essential (= 12.5),
 bzip2 (= 1.0.6-9),
 coreutils (= 8.30-2),
 cpp (= 4:8.2.0-2),
 cpp-8 (= 8.3.0-2),
 dash (= 0.5.10.2-5),
 debconf (= 1.5.71),
 debhelper (= 12.1.1),
 debianutils (= 4.8.6.1),
 dh-autoreconf (= 19),
 dh-strip-nondeterminism (= 1.1.1-1),
 diffutils (= 1:3.7-2),
 dpkg (= 1.19.5),
 dpkg-dev (= 1.19.5),
 dwz (= 0.12-3),
 fdisk (= 2.33.1-0.1),
 file (= 1:5.35-2),
 findutils (= 4.6.0+git+20190209-2),
 g++ (= 4:8.2.0-2),
 g++-8 (= 8.3.0-2),
 gcc (= 4:8.2.0-2),
 gcc-8 (= 8.3.0-2),
 gcc-8-base (= 8.3.0-2),
 gettext (= 0.19.8.1-9),
 gettext-base (= 0.19.8.1-9),
 grep (= 3.3-1),
 groff-base (= 1.22.4-2),
 gzip (= 1.9-3),
 hostname (= 3.21),
 init-system-helpers (= 1.56+nmu1),
 intltool-debian (= 0.35.0+20060710.5),
 libacl1 (= 2.2.52-5),
 libarchive-zip-perl (= 1.64-1),
 libasan5 (= 8.3.0-2),
 libatomic1 (= 8.3.0-2),
 libattr1 (= 1:2.4.47-4),
 libaudit-common (= 1:2.8.4-2),
 libaudit1 (= 1:2.8.4-2),
 libbinutils (= 2.31.1-14),
 libblkid1 (= 2.33.1-0.1),
 libbsd0 (= 0.9.1-2),
 libbz2-1.0 (= 1.0.6-9),
 libc-bin (= 2.28-7),
 libc-dev-bin (= 2.28-7),
 libc6 (= 2.28-7),
 libc6-dev (= 2.28-7),
 libcap-ng0 (= 0.7.9-2),
 libcc1-0 (= 8.3.0-2),
 libcroco3 (= 0.6.12-3),
 libdb5.3 (= 5.3.28+dfsg1-0.5),
 libdebconfclient0 (= 0.247),
 libdpkg-perl (= 1.19.5),
 libelf1 (= 0.176-1),
 libfdisk1 (= 2.33.1-0.1),
 libffi6 (= 3.2.1-9),
 libfile-stripnondeterminism-perl (= 1.1.1-1),
 libgcc-8-dev (= 8.3.0-2),
 libgcc1 (= 1:8.3.0-2),
 libgcrypt20 (= 1.8.4-5),
 libgdbm-compat4 (= 1.18.1-3),
 libgdbm6 (= 1.18.1-3),
 libglib2.0-0 (= 2.58.3-1),
 libgmp10 (= 2:6.1.2+dfsg-4),
 libgomp1 (= 8.3.0-2),
 libgpg-error0 (= 1.35-1),
 libicu63 (= 63.1-6),
 libisl19 (= 0.20-2),
 libitm1 (= 8.3.0-2),
 liblsan0 (= 8.3.0-2),
 liblz4-1 (= 1.8.3-1),
 liblzma5 (= 5.2.4-1),
 libmagic-mgc (= 1:5.35-2),
 libmagic1 (= 1:5.35-2),
 libmount1 (= 2.33.1-0.1),
 libmpc3 (= 1.1.0-1),
 libmpfr6 (= 4.0.2-1),
 libmpx2 (= 8.3.0-2),
 libncurses6 (= 6.1+20181013-2),
 libncursesw6 (= 6.1+20181013-2),
 libpam-modules (= 1.3.1-5),
 libpam-modules-bin (= 1.3.1-5),
 libpam-runtime (= 1.3.1-5),
 libpam0g (= 1.3.1-5),
 libpcre3 (= 2:8.39-11),
 libperl5.28 (= 5.28.1-4),
 libpipeline1 (= 1.5.1-2),
 libquadmath0 (= 8.3.0-2),
 libseccomp2 (= 2.3.3-4),
 libselinux1 (= 2.8-1+b1),
 libsigsegv2 (= 2.12-2),
 libsmartcols1 (= 2.33.1-0.1),
 libstdc++-8-dev (= 8.3.0-2),
 libstdc++6 (= 8.3.0-2),
 libsystemd0 (= 241-1),
 libtinfo6 (= 6.1+20181013-2),
 libtool (= 2.4.6-10),
 libtsan0 (= 8.3.0-2),
 libubsan1 (= 8.3.0-2),
 libuchardet0 (= 0.0.6-3),
 libudev1 (= 241-1),
 libunistring2 (= 0.9.10-1),
 libuuid1 (= 2.33.1-0.1),
 libxml2 (= 2.9.4+dfsg1-7+b3),
 linux-libc-dev (= 4.19.20-1),
 login (= 1:4.5-1.1),
 m4 (= 1.4.18-2),
 make (= 4.2.1-1.2),
 man-db (= 2.8.5-2),
 mawk (= 1.3.3-17+b3),
 ncurses-base (= 6.1+20181013-2),
 ncurses-bin (= 6.1+20181013-2),
 patch (= 2.7.6-3),
 perl (= 5.28.1-4),
 perl-base (= 5.28.1-4),
 perl-modules-5.28 (= 5.28.1-4),
 po-debconf (= 1.0.21),
 sed (= 4.7-1),
 sensible-utils (= 0.0.12),
 sysvinit-utils (= 2.93-8),
 tar (= 1.30+dfsg-5),
 util-linux (= 2.33.1-0.1),
 xz-utils (= 5.2.4-1),
 zlib1g (= 1:1.2.11.dfsg-1)
Environment:
 DEB_BUILD_OPTIONS="nocheck parallel=16"
 DEB_BUILD_PROFILES="cross nocheck"
 LANG="en_US.UTF-8"
 LC_ALL="C.UTF-8"
 LD_LIBRARY_PATH="/usr/lib/libeatmydata"
 MAKEFLAGS=" -j16"
 SOURCE_DATE_EPOCH="1212119580"


+------------------------------------------------------------------------------+
| Package contents                                                             |
+------------------------------------------------------------------------------+


iat-dbgsym_0.1.3-7_armhf.deb
----------------------------

 new Debian package, version 2.0.
 size 7824 bytes: control archive=516 bytes.
     318 bytes,    12 lines      control              
     106 bytes,     1 lines      md5sums              
 Package: iat-dbgsym
 Source: iat
 Version: 0.1.3-7
 Auto-Built-Package: debug-symbols
 Architecture: armhf
 Maintainer: Dmitry E. Oboukhov <unera@debian.org>
 Installed-Size: 22
 Depends: iat (= 0.1.3-7)
 Section: debug
 Priority: optional
 Description: debug symbols for iat
 Build-Ids: c2826458d67a43e1f953d698caa15112fbc68d83

drwxr-xr-x root/root         0 2008-05-30 03:53 ./
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/lib/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/lib/debug/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/lib/debug/.build-id/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/lib/debug/.build-id/c2/
-rw-r--r-- root/root     11468 2008-05-30 03:53 ./usr/lib/debug/.build-id/c2/826458d67a43e1f953d698caa15112fbc68d83.debug
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/share/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/share/doc/
lrwxrwxrwx root/root         0 2008-05-30 03:53 ./usr/share/doc/iat-dbgsym -> iat


iat_0.1.3-7_armhf.deb
---------------------

 new Debian package, version 2.0.
 size 6908 bytes: control archive=728 bytes.
     428 bytes,    12 lines      control              
     307 bytes,     5 lines      md5sums              
 Package: iat
 Version: 0.1.3-7
 Architecture: armhf
 Maintainer: Dmitry E. Oboukhov <unera@debian.org>
 Installed-Size: 24
 Depends: libc6 (>= 2.4)
 Section: otherosfs
 Priority: extra
 Description: Converts many CD-ROM image formats to iso9660
  iat (Iso9660 Analyzer Tool) is a tool for detecting the structure
  of many types of CD-ROM image file formats, such as BIN, MDF, PDI,
  CDI, NRG, and B5I, and  converting them into ISO-9660.

drwxr-xr-x root/root         0 2008-05-30 03:53 ./
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/bin/
-rwxr-xr-x root/root      9788 2008-05-30 03:53 ./usr/bin/iat
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/share/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/share/doc/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/share/doc/iat/
-rw-r--r-- root/root       512 2008-05-30 03:53 ./usr/share/doc/iat/changelog.Debian.gz
-rw-r--r-- root/root       143 2007-03-08 19:48 ./usr/share/doc/iat/changelog.gz
-rw-r--r-- root/root      1235 2008-05-30 03:53 ./usr/share/doc/iat/copyright
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/share/man/
drwxr-xr-x root/root         0 2008-05-30 03:53 ./usr/share/man/man1/
-rw-r--r-- root/root       510 2008-05-30 03:53 ./usr/share/man/man1/iat.1.gz


lintian
-------


Setup apt archive
-----------------

Merged Build-Depends: lintian:amd64
Filtered Build-Depends: lintian:amd64
dpkg-deb: building package 'sbuild-build-depends-lintian-dummy' in '/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-lintian-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [963 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [521 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [609 B]
Fetched 2093 B in 0s (136 kB/s)
Reading package lists...
Reading package lists...

Install lintian build dependencies (apt-based resolver)
-------------------------------------------------------

Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl uuid-runtime
Use 'apt autoremove' to remove them.
The following additional packages will be installed:
  diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl
  libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl
  libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl
  libio-pty-perl libipc-run-perl libipc-system-simple-perl
  liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl
  libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl
  libsub-name-perl libtext-levenshtein-perl lintian patchutils t1utils
Suggested packages:
  libhtml-template-perl binutils-multiarch libtext-template-perl
Recommended packages:
  libcgi-fast-perl libasync-mergepoint-perl libsereal-perl libtest-fatal-perl
  libtest-refcount-perl libdigest-bubblebabble-perl libnet-dns-sec-perl
  libnet-libidn-perl libunicode-utf8-perl libperlio-gzip-perl
The following NEW packages will be installed:
  diffstat libapt-pkg-perl libcapture-tiny-perl libcgi-pm-perl
  libclass-accessor-perl libclone-perl libdigest-hmac-perl libemail-valid-perl
  libexporter-tiny-perl libfile-basedir-perl libfuture-perl libio-async-perl
  libio-pty-perl libipc-run-perl libipc-system-simple-perl
  liblist-moreutils-perl libnet-dns-perl libnet-domain-tld-perl libnet-ip-perl
  libparse-debianchangelog-perl libpath-tiny-perl libstruct-dumb-perl
  libsub-name-perl libtext-levenshtein-perl lintian patchutils
  sbuild-build-depends-lintian-dummy:armhf t1utils
0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded.
Need to get 2847 kB/2971 kB of archives.
After this operation, 9356 kB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-lintian-dummy 0.invalid.0 [844 B]
Get:2 http://10.116.41.102/debian sid/main amd64 libapt-pkg-perl amd64 0.1.34+b1 [71.2 kB]
Get:3 http://10.116.41.102/debian sid/main amd64 libcapture-tiny-perl all 0.48-1 [26.0 kB]
Get:4 http://10.116.41.102/debian sid/main amd64 libcgi-pm-perl all 4.40-1 [222 kB]
Get:5 http://10.116.41.102/debian sid/main amd64 libsub-name-perl amd64 0.21-1+b3 [13.6 kB]
Get:6 http://10.116.41.102/debian sid/main amd64 libclass-accessor-perl all 0.51-1 [23.2 kB]
Get:7 http://10.116.41.102/debian sid/main amd64 libclone-perl amd64 0.41-1+b1 [14.6 kB]
Get:8 http://10.116.41.102/debian sid/main amd64 libdigest-hmac-perl all 1.03+dfsg-2 [10.6 kB]
Get:9 http://10.116.41.102/debian sid/main amd64 libnet-ip-perl all 1.26-2 [29.0 kB]
Get:10 http://10.116.41.102/debian sid/main amd64 libnet-dns-perl all 1.19-1 [372 kB]
Get:11 http://10.116.41.102/debian sid/main amd64 libnet-domain-tld-perl all 1.75-1 [33.3 kB]
Get:12 http://10.116.41.102/debian sid/main amd64 libemail-valid-perl all 1.202-1 [23.0 kB]
Get:13 http://10.116.41.102/debian sid/main amd64 libexporter-tiny-perl all 1.002001-1 [36.9 kB]
Get:14 http://10.116.41.102/debian sid/main amd64 libipc-system-simple-perl all 1.25-4 [26.5 kB]
Get:15 http://10.116.41.102/debian sid/main amd64 libfile-basedir-perl all 0.08-1 [17.7 kB]
Get:16 http://10.116.41.102/debian sid/main amd64 libfuture-perl all 0.39-1 [74.5 kB]
Get:17 http://10.116.41.102/debian sid/main amd64 libstruct-dumb-perl all 0.09-1 [11.1 kB]
Get:18 http://10.116.41.102/debian sid/main amd64 libio-async-perl all 0.72-1 [262 kB]
Get:19 http://10.116.41.102/debian sid/main amd64 libio-pty-perl amd64 1:1.08-1.1+b5 [33.7 kB]
Get:20 http://10.116.41.102/debian sid/main amd64 libipc-run-perl all 20180523.0-1 [101 kB]
Get:21 http://10.116.41.102/debian sid/main amd64 liblist-moreutils-perl amd64 0.416-1+b4 [64.2 kB]
Get:22 http://10.116.41.102/debian sid/main amd64 libparse-debianchangelog-perl all 1.2.0-13 [59.5 kB]
Get:23 http://10.116.41.102/debian sid/main amd64 libpath-tiny-perl all 0.108-1 [53.3 kB]
Get:24 http://10.116.41.102/debian sid/main amd64 libtext-levenshtein-perl all 0.13-1 [11.1 kB]
Get:25 http://10.116.41.102/debian sid/main amd64 t1utils amd64 1.41-3 [62.3 kB]
Get:26 http://10.116.41.102/debian sid/main amd64 lintian all 2.9.1 [1193 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 2847 kB in 0s (10.0 MB/s)
Selecting previously unselected package diffstat.
(Reading database ... 19150 files and directories currently installed.)
Preparing to unpack .../00-diffstat_1.62-1_amd64.deb ...
Unpacking diffstat (1.62-1) ...
Selecting previously unselected package libapt-pkg-perl.
Preparing to unpack .../01-libapt-pkg-perl_0.1.34+b1_amd64.deb ...
Unpacking libapt-pkg-perl (0.1.34+b1) ...
Selecting previously unselected package libcapture-tiny-perl.
Preparing to unpack .../02-libcapture-tiny-perl_0.48-1_all.deb ...
Unpacking libcapture-tiny-perl (0.48-1) ...
Selecting previously unselected package libcgi-pm-perl.
Preparing to unpack .../03-libcgi-pm-perl_4.40-1_all.deb ...
Unpacking libcgi-pm-perl (4.40-1) ...
Selecting previously unselected package libsub-name-perl.
Preparing to unpack .../04-libsub-name-perl_0.21-1+b3_amd64.deb ...
Unpacking libsub-name-perl (0.21-1+b3) ...
Selecting previously unselected package libclass-accessor-perl.
Preparing to unpack .../05-libclass-accessor-perl_0.51-1_all.deb ...
Unpacking libclass-accessor-perl (0.51-1) ...
Selecting previously unselected package libclone-perl.
Preparing to unpack .../06-libclone-perl_0.41-1+b1_amd64.deb ...
Unpacking libclone-perl (0.41-1+b1) ...
Selecting previously unselected package libdigest-hmac-perl.
Preparing to unpack .../07-libdigest-hmac-perl_1.03+dfsg-2_all.deb ...
Unpacking libdigest-hmac-perl (1.03+dfsg-2) ...
Selecting previously unselected package libnet-ip-perl.
Preparing to unpack .../08-libnet-ip-perl_1.26-2_all.deb ...
Unpacking libnet-ip-perl (1.26-2) ...
Selecting previously unselected package libnet-dns-perl.
Preparing to unpack .../09-libnet-dns-perl_1.19-1_all.deb ...
Unpacking libnet-dns-perl (1.19-1) ...
Selecting previously unselected package libnet-domain-tld-perl.
Preparing to unpack .../10-libnet-domain-tld-perl_1.75-1_all.deb ...
Unpacking libnet-domain-tld-perl (1.75-1) ...
Selecting previously unselected package libemail-valid-perl.
Preparing to unpack .../11-libemail-valid-perl_1.202-1_all.deb ...
Unpacking libemail-valid-perl (1.202-1) ...
Selecting previously unselected package libexporter-tiny-perl.
Preparing to unpack .../12-libexporter-tiny-perl_1.002001-1_all.deb ...
Unpacking libexporter-tiny-perl (1.002001-1) ...
Selecting previously unselected package libipc-system-simple-perl.
Preparing to unpack .../13-libipc-system-simple-perl_1.25-4_all.deb ...
Unpacking libipc-system-simple-perl (1.25-4) ...
Selecting previously unselected package libfile-basedir-perl.
Preparing to unpack .../14-libfile-basedir-perl_0.08-1_all.deb ...
Unpacking libfile-basedir-perl (0.08-1) ...
Selecting previously unselected package libfuture-perl.
Preparing to unpack .../15-libfuture-perl_0.39-1_all.deb ...
Unpacking libfuture-perl (0.39-1) ...
Selecting previously unselected package libstruct-dumb-perl.
Preparing to unpack .../16-libstruct-dumb-perl_0.09-1_all.deb ...
Unpacking libstruct-dumb-perl (0.09-1) ...
Selecting previously unselected package libio-async-perl.
Preparing to unpack .../17-libio-async-perl_0.72-1_all.deb ...
Unpacking libio-async-perl (0.72-1) ...
Selecting previously unselected package libio-pty-perl.
Preparing to unpack .../18-libio-pty-perl_1%3a1.08-1.1+b5_amd64.deb ...
Unpacking libio-pty-perl (1:1.08-1.1+b5) ...
Selecting previously unselected package libipc-run-perl.
Preparing to unpack .../19-libipc-run-perl_20180523.0-1_all.deb ...
Unpacking libipc-run-perl (20180523.0-1) ...
Selecting previously unselected package liblist-moreutils-perl.
Preparing to unpack .../20-liblist-moreutils-perl_0.416-1+b4_amd64.deb ...
Unpacking liblist-moreutils-perl (0.416-1+b4) ...
Selecting previously unselected package libparse-debianchangelog-perl.
Preparing to unpack .../21-libparse-debianchangelog-perl_1.2.0-13_all.deb ...
Unpacking libparse-debianchangelog-perl (1.2.0-13) ...
Selecting previously unselected package libpath-tiny-perl.
Preparing to unpack .../22-libpath-tiny-perl_0.108-1_all.deb ...
Unpacking libpath-tiny-perl (0.108-1) ...
Selecting previously unselected package libtext-levenshtein-perl.
Preparing to unpack .../23-libtext-levenshtein-perl_0.13-1_all.deb ...
Unpacking libtext-levenshtein-perl (0.13-1) ...
Selecting previously unselected package patchutils.
Preparing to unpack .../24-patchutils_0.3.4-2_amd64.deb ...
Unpacking patchutils (0.3.4-2) ...
Selecting previously unselected package t1utils.
Preparing to unpack .../25-t1utils_1.41-3_amd64.deb ...
Unpacking t1utils (1.41-3) ...
Selecting previously unselected package lintian.
Preparing to unpack .../26-lintian_2.9.1_all.deb ...
Unpacking lintian (2.9.1) ...
Selecting previously unselected package sbuild-build-depends-lintian-dummy:armhf.
Preparing to unpack .../27-sbuild-build-depends-lintian-dummy_0.invalid.0_armhf.deb ...
Unpacking sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Setting up libapt-pkg-perl (0.1.34+b1) ...
Setting up libstruct-dumb-perl (0.09-1) ...
Setting up libio-pty-perl (1:1.08-1.1+b5) ...
Setting up libclone-perl (0.41-1+b1) ...
Setting up libfuture-perl (0.39-1) ...
Setting up libcgi-pm-perl (4.40-1) ...
Setting up libtext-levenshtein-perl (0.13-1) ...
Setting up libio-async-perl (0.72-1) ...
Setting up patchutils (0.3.4-2) ...
Setting up libdigest-hmac-perl (1.03+dfsg-2) ...
Setting up libipc-system-simple-perl (1.25-4) ...
Setting up libnet-domain-tld-perl (1.75-1) ...
Setting up t1utils (1.41-3) ...
Setting up diffstat (1.62-1) ...
Setting up libipc-run-perl (20180523.0-1) ...
Setting up libcapture-tiny-perl (0.48-1) ...
Setting up libsub-name-perl (0.21-1+b3) ...
Setting up libpath-tiny-perl (0.108-1) ...
Setting up libexporter-tiny-perl (1.002001-1) ...
Setting up libclass-accessor-perl (0.51-1) ...
Setting up libnet-ip-perl (1.26-2) ...
Setting up libfile-basedir-perl (0.08-1) ...
Setting up liblist-moreutils-perl (0.416-1+b4) ...
Setting up libnet-dns-perl (1.19-1) ...
Setting up libparse-debianchangelog-perl (1.2.0-13) ...
Setting up libemail-valid-perl (1.202-1) ...
Setting up lintian (2.9.1) ...
Setting up sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Processing triggers for man-db (2.8.5-2) ...
Not building database; man-db/auto-update is not 'true'.
W: iat source: debhelper-but-no-misc-depends iat
W: iat source: package-uses-deprecated-debhelper-compat-version 5
W: iat source: dh-clean-k-is-deprecated
W: iat source: missing-debian-source-format
E: iat source: no-strong-digests-in-dsc
W: iat source: obsolete-url-in-packaging debian/copyright http://iat.berlios.de/
W: iat source: obsolete-url-in-packaging debian/watch https://developer.berlios.de/project/showfiles.php?group_id=6784
W: iat source: debian-rules-missing-recommended-target build-arch
W: iat source: debian-rules-missing-recommended-target build-indep
W: iat source: debian-rules-should-not-set-CFLAGS-from-noopt
W: iat source: ancient-standards-version 3.7.3 (released 2007-12-03) (current is 4.3.0)
W: iat: priority-extra-is-replaced-by-priority-optional

E: Lintian run failed (policy violation)

+------------------------------------------------------------------------------+
| Post Build                                                                   |
+------------------------------------------------------------------------------+


+------------------------------------------------------------------------------+
| Cleanup                                                                      |
+------------------------------------------------------------------------------+

Purging /<<BUILDDIR>>
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl uuid-runtime
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  libauthen-sasl-perl libdata-dump-perl libfont-afm-perl libhtml-form-perl
  libhtml-format-perl libhttp-daemon-perl libmailtools-perl
  libnet-smtp-ssl-perl libyaml-0-2 libyaml-libyaml-perl uuid-runtime
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
  autoconf* automake* autopoint* autotools-dev* bsdmainutils* debhelper*
  dh-autoreconf* dh-strip-nondeterminism* diffstat* dwz* gcc-8-base:armhf*
  gettext* gettext-base* groff-base* intltool-debian* libapt-pkg-perl*
  libarchive-zip-perl* libasan5:armhf* libatomic1:armhf* libbsd0* libc6:armhf*
  libc6-dev:armhf* libcapture-tiny-perl* libcgi-pm-perl*
  libclass-accessor-perl* libclone-perl* libcroco3* libdigest-hmac-perl*
  libelf1* libemail-valid-perl* libexporter-tiny-perl* libfile-basedir-perl*
  libfile-stripnondeterminism-perl* libfuture-perl* libgcc-8-dev:armhf*
  libgcc1:armhf* libglib2.0-0* libgomp1:armhf* libio-async-perl*
  libio-pty-perl* libipc-run-perl* libipc-system-simple-perl*
  liblist-moreutils-perl* libncurses6* libnet-dns-perl*
  libnet-domain-tld-perl* libnet-ip-perl* libparse-debianchangelog-perl*
  libpath-tiny-perl* libpipeline1* libsigsegv2* libstdc++-8-dev:armhf*
  libstdc++6:armhf* libstruct-dumb-perl* libsub-name-perl*
  libtext-levenshtein-perl* libtool* libubsan1:armhf* libuchardet0* lintian*
  linux-libc-dev:armhf* m4* man-db* patchutils* po-debconf*
  sbuild-build-depends-lintian-dummy:armhf*
  sbuild-build-depends-main-dummy:armhf* t1utils*
0 upgraded, 0 newly installed, 68 to remove and 0 not upgraded.
After this operation, 88.5 MB disk space will be freed.
(Reading database ... 20428 files and directories currently installed.)
Removing sbuild-build-depends-main-dummy:armhf (0.invalid.0) ...
Removing sbuild-build-depends-lintian-dummy:armhf (0.invalid.0) ...
Removing lintian (2.9.1) ...
Removing diffstat (1.62-1) ...
Removing libstdc++-8-dev:armhf (8.3.0-2) ...
Removing libgcc-8-dev:armhf (8.3.0-2) ...
Removing libubsan1:armhf (8.3.0-2) ...
Removing libasan5:armhf (8.3.0-2) ...
Removing libstdc++6:armhf (8.3.0-2) ...
Removing libapt-pkg-perl (0.1.34+b1) ...
Removing libatomic1:armhf (8.3.0-2) ...
Removing libc6-dev:armhf (2.28-7) ...
Removing libgomp1:armhf (8.3.0-2) ...
Removing libcapture-tiny-perl (0.48-1) ...
Removing libparse-debianchangelog-perl (1.2.0-13) ...
Removing libcgi-pm-perl (4.40-1) ...
Removing libclass-accessor-perl (0.51-1) ...
Removing libclone-perl (0.41-1+b1) ...
Removing libemail-valid-perl (1.202-1) ...
Removing libnet-dns-perl (1.19-1) ...
Removing libdigest-hmac-perl (1.03+dfsg-2) ...
Removing liblist-moreutils-perl (0.416-1+b4) ...
Removing libexporter-tiny-perl (1.002001-1) ...
Removing libfile-basedir-perl (0.08-1) ...
Removing libio-async-perl (0.72-1) ...
Removing libfuture-perl (0.39-1) ...
Removing libipc-run-perl (20180523.0-1) ...
Removing libio-pty-perl (1:1.08-1.1+b5) ...
Removing libipc-system-simple-perl (1.25-4) ...
Removing libnet-domain-tld-perl (1.75-1) ...
Removing libnet-ip-perl (1.26-2) ...
Removing libpath-tiny-perl (0.108-1) ...
Removing libstruct-dumb-perl (0.09-1) ...
Removing libsub-name-perl (0.21-1+b3) ...
Removing libtext-levenshtein-perl (0.13-1) ...
Removing linux-libc-dev:armhf (4.19.20-1) ...
Removing patchutils (0.3.4-2) ...
Removing t1utils (1.41-3) ...
Removing libgcc1:armhf (1:8.3.0-2) ...
Removing debhelper (12.1.1) ...
Removing dh-strip-nondeterminism (1.1.1-1) ...
Removing man-db (2.8.5-2) ...
Removing bsdmainutils (11.1.2+b1) ...
Removing dwz (0.12-3) ...
Removing gcc-8-base:armhf (8.3.0-2) ...
Removing po-debconf (1.0.21) ...
Removing intltool-debian (0.35.0+20060710.5) ...
Removing gettext (0.19.8.1-9) ...
Removing gettext-base (0.19.8.1-9) ...
Removing groff-base (1.22.4-2) ...
Removing libfile-stripnondeterminism-perl (1.1.1-1) ...
Removing libarchive-zip-perl (1.64-1) ...
Removing libbsd0:amd64 (0.9.1-2) ...
Removing libc6:armhf (2.28-7) ...
Removing libcroco3:amd64 (0.6.12-3) ...
Removing libelf1:amd64 (0.176-1) ...
Removing libglib2.0-0:amd64 (2.58.3-1) ...
Removing libncurses6:amd64 (6.1+20181013-2) ...
Removing libpipeline1:amd64 (1.5.1-2) ...
Removing libuchardet0:amd64 (0.0.6-3) ...
Removing dh-autoreconf (19) ...
Removing automake (1:1.16.1-4) ...
Removing autoconf (2.69-11) ...
Removing autopoint (0.19.8.1-9) ...
Removing libtool (2.4.6-10) ...
Removing autotools-dev (20180224.1) ...
Removing m4 (1.4.18-2) ...
Removing libsigsegv2:amd64 (2.12-2) ...
Processing triggers for ccache (3.6-1) ...
Updating symlinks in /usr/lib/ccache ...
Processing triggers for libc-bin (2.28-7) ...
(Reading database ... 16458 files and directories currently installed.)
Purging configuration files for libglib2.0-0:amd64 (2.58.3-1) ...
Purging configuration files for lintian (2.9.1) ...
Purging configuration files for man-db (2.8.5-2) ...
Purging configuration files for bsdmainutils (11.1.2+b1) ...
Purging configuration files for autoconf (2.69-11) ...
Purging configuration files for libc6:armhf (2.28-7) ...
Purging configuration files for groff-base (1.22.4-2) ...

+------------------------------------------------------------------------------+
| Summary                                                                      |
+------------------------------------------------------------------------------+

Build Architecture: amd64
Build Profiles: cross nocheck
Build Type: any
Build-Space: n/a
Build-Time: 6
Distribution: unstable-amd64-sbuild
Foreign Architectures: armhf
Host Architecture: armhf
Install-Time: 6
Job: /home/build/sbuild-setup/repo/pool/main/i/iat/iat_0.1.3-7.dsc
Lintian: fail
Machine Architecture: amd64
Package: iat
Package-Time: 17
Source-Version: 0.1.3-7
Space: n/a
Status: successful
Version: 0.1.3-7
--------------------------------------------------------------------------------
Finished at 2019-03-04T13:28:10Z
Build needed 00:00:17, no disk space